All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@mvista.com>
To: Maulik <x0082077@ti.com>
Cc: 'Sergei Shtylyov' <sshtylyov@mvista.com>,
	'Ajay Kumar Gupta' <ajay.gupta@ti.com>,
	linux-usb@vger.kernel.org, linux-omap@vger.kernel.org,
	felipe.balbi@nokia.com, gregkh@suse.de,
	'David Brownell' <david-b@pacbell.net>
Subject: Re: [PATCH 8/8] usb: musb: Fix suspend interrupt issue in device mode
Date: Thu, 17 Jun 2010 17:33:17 +0400	[thread overview]
Message-ID: <4C1A241D.1020509@ru.mvista.com> (raw)
In-Reply-To: <006501cb0e16$c08bae00$808918ac@apr.dhcp.ti.com>

Hello.

Maulik wrote:

>> -----Original Message-----
>> From: Sergei Shtylyov [mailto:sshtylyov@mvista.com]
>> Sent: Thursday, June 17, 2010 4:57 PM
>> To: Ajay Kumar Gupta
>> Cc: linux-usb@vger.kernel.org; linux-omap@vger.kernel.org;
>> felipe.balbi@nokia.com; gregkh@suse.de; Maulik Mankad; David Brownell
>> Subject: Re: [PATCH 8/8] usb: musb: Fix suspend interrupt issue in device
>> mode
>>
>> Hello.
>>
>> Ajay Kumar Gupta wrote:
>>
>>> From: Maulik Mankad <x0082077@ti.com>
>>> As a part of aligning the ISR code for MUSB with the specs, the
>>> ISR code was re-written.
>>> See Commit 1c25fda4a09e8229800979986ef399401053b46e (usb: musb: handle
>>> irqs in the order dictated by programming guide)
>>> With this the suspend interrupt came accidently under
>> CONFIG_USB_MUSB_HDRC_HCD.
>>
>>> The fix brings suspend interrupt handling outside
>>> CONFIG_USB_MUSB_HDRC_HCD.
>>> Signed-off-by: Maulik Mankad <x0082077@ti.com>
>>> Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
>>> Cc: David Brownell <david-b@pacbell.net>
>>> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
>> [...]
>>
>>> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
>>> index 4f43db7..64b08f9 100644
>>> --- a/drivers/usb/musb/musb_core.c
>>> +++ b/drivers/usb/musb/musb_core.c
>>> @@ -635,7 +635,7 @@ static irqreturn_t musb_stage0_irq(struct musb
>> *musb, u8 int_usb,
>>>  		handled = IRQ_HANDLED;
>>>  	}
>>>
>>> -
>>> +#endif

>>     Could you move #endif one line up, so that it closely embraces the
>> *if* statement?

> The patch is already in Greg's queue. 

    Hm, how come it ended up there before the patches submitted earlier 
-- namely before the patch that's needed for the suspend interrupt to be 
handled at all? :-/
    Felipe, could you also ACK the other pending patches, not this 
single one?

> Greg,

> Do you want me to resend this patch?

> Thanks,
> Maulik

WBR, Sergei

  reply	other threads:[~2010-06-17 13:34 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-17 10:40 [patch-2.6.35-rc3+ 0/8] musb patches Ajay Kumar Gupta
2010-06-17 10:40 ` [PATCH 1/8] musb_core: make disconnect and suspend interrupts work again Ajay Kumar Gupta
     [not found]   ` <1276771242-5201-2-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2010-06-17 10:40     ` [PATCH 2/8] MUSB: make non-OMAP platforms build with CONFIG_PM=y Ajay Kumar Gupta
2010-06-17 10:40       ` [PATCH 3/8] musb: fix compilation warning in host only mode Ajay Kumar Gupta
     [not found]         ` <1276771242-5201-4-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2010-06-17 10:40           ` [PATCH 4/8] USB: musb: suppress warning about unused flags Ajay Kumar Gupta
     [not found]             ` <1276771242-5201-5-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2010-06-17 10:40               ` [PATCH 5/8] usb: musb: fix Blackfin ulpi stubs Ajay Kumar Gupta
2010-06-17 10:40                 ` [PATCH 6/8] usb: musb: Enable the maximum supported burst mode for DMA Ajay Kumar Gupta
     [not found]                   ` <1276771242-5201-7-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2010-06-17 10:40                     ` [PATCH 7/8] musb: Kill board specific pinmux from driver file Ajay Kumar Gupta
2010-06-17 10:40                       ` [PATCH 8/8] usb: musb: Fix suspend interrupt issue in device mode Ajay Kumar Gupta
     [not found]                         ` <1276771242-5201-9-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2010-06-17 10:40                           ` Ajay Kumar Gupta
2010-06-17 11:27                           ` Sergei Shtylyov
     [not found]                             ` <4C1A0687.4080002-hkdhdckH98+B+jHODAdFcQ@public.gmane.org>
2010-06-17 12:15                               ` Maulik
2010-06-17 13:33                                 ` Sergei Shtylyov [this message]
     [not found]                                 ` <006501cb0e16$c08bae00$808918ac-wD+IZp/g4/2mHdYHvhjUOg@public.gmane.org>
2010-06-17 14:18                                   ` Greg KH
2010-06-18  5:21                         ` David Brownell
     [not found]                       ` <1276771242-5201-8-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2010-06-24  6:11                         ` [PATCH 7/8] musb: Kill board specific pinmux from driver file Felipe Balbi
2010-06-24  6:16                           ` Gadiyar, Anand
2010-06-24  6:11                     ` [PATCH 6/8] usb: musb: Enable the maximum supported burst mode for DMA Felipe Balbi
2010-06-24  6:10                 ` [PATCH 5/8] usb: musb: fix Blackfin ulpi stubs Felipe Balbi
2010-06-24  6:08             ` [PATCH 4/8] USB: musb: suppress warning about unused flags Felipe Balbi
     [not found]               ` <20100624060857.GG8078-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
2010-06-24  9:50                 ` Sergei Shtylyov
     [not found]                   ` <4C232A4C.6040102-hkdhdckH98+B+jHODAdFcQ@public.gmane.org>
2010-06-28 14:24                     ` Felipe Balbi
2010-06-28 17:27                       ` Sergei Shtylyov
2010-06-17 11:18           ` [PATCH 3/8] musb: fix compilation warning in host only mode Sergei Shtylyov
2010-06-17 12:09             ` Gupta, Ajay Kumar
     [not found]               ` <19F8576C6E063C45BE387C64729E7394044E91B843-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-06-17 13:24                 ` Sergei Shtylyov
     [not found]                   ` <4C1A2220.7070502-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2010-06-17 14:09                     ` Gupta, Ajay Kumar
2010-06-24  6:03           ` Felipe Balbi
2010-06-24 11:17             ` Gupta, Ajay Kumar
2010-06-24 13:10               ` Sergei Shtylyov
     [not found]                 ` <4C235929.9030605-hkdhdckH98+B+jHODAdFcQ@public.gmane.org>
2010-06-24 14:36                   ` Gupta, Ajay Kumar
2010-07-06  9:12                 ` Felipe Balbi
2010-07-06  9:13               ` Felipe Balbi
2010-07-07 22:01                 ` Greg KH
2010-07-08  1:53                   ` Gupta, Ajay Kumar
     [not found]                     ` <19F8576C6E063C45BE387C64729E7394044EB95AE0-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-07-08  3:35                       ` Greg KH
2010-06-24  6:02       ` [PATCH 2/8] MUSB: make non-OMAP platforms build with CONFIG_PM=y Felipe Balbi
2010-06-24  6:01     ` [PATCH 1/8] musb_core: make disconnect and suspend interrupts work again Felipe Balbi
     [not found]       ` <20100624060151.GD8078-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
2010-06-24 17:01         ` Greg KH
     [not found] ` <1276771242-5201-1-git-send-email-ajay.gupta-l0cyMroinI0@public.gmane.org>
2010-06-17 14:17   ` [patch-2.6.35-rc3+ 0/8] musb patches Greg KH
2010-06-17 14:26     ` Gupta, Ajay Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C1A241D.1020509@ru.mvista.com \
    --to=sshtylyov@mvista.com \
    --cc=ajay.gupta@ti.com \
    --cc=david-b@pacbell.net \
    --cc=felipe.balbi@nokia.com \
    --cc=gregkh@suse.de \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=x0082077@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.