From: Wan ZongShun <mcuos.com@gmail.com> To: linux-arm-kernel <linux-arm-kernel@lists.infradead.org>, LKML <linux-kernel@vger.kernel.org>, Russell King <linux@arm.linux.org.uk> Subject: [PATCH] ARM/nuc900: patch for adding the global control registers definition Date: Fri, 23 Jul 2010 21:38:27 +0800 [thread overview] Message-ID: <4C499B53.5090400@gmail.com> (raw) This patch is to add the global control registers definition, many drivers need it, such as usb driver,I need it to control usb phy open or close, so I sent this patch. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> --- arch/arm/mach-w90x900/include/mach/regs-gcr.h | 39 +++++++++++++++++++++++++ 1 files changed, 39 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-w90x900/include/mach/regs-gcr.h diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/include/mach/regs-gcr.h new file mode 100644 index 0000000..6087abd --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/regs-gcr.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-w90x900/include/mach/regs-gcr.h + * + * Copyright (c) 2010 Nuvoton technology corporation + * All rights reserved. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_REGS_GCR_H +#define __ASM_ARCH_REGS_GCR_H + +/* Global control registers */ + +#define GCR_BA W90X900_VA_GCR +#define REG_PDID (GCR_BA+0x000) +#define REG_PWRON (GCR_BA+0x004) +#define REG_ARBCON (GCR_BA+0x008) +#define REG_MFSEL (GCR_BA+0x00C) +#define REG_EBIDPE (GCR_BA+0x010) +#define REG_LCDDPE (GCR_BA+0x014) +#define REG_GPIOCPE (GCR_BA+0x018) +#define REG_GPIODPE (GCR_BA+0x01C) +#define REG_GPIOEPE (GCR_BA+0x020) +#define REG_GPIOFPE (GCR_BA+0x024) +#define REG_GPIOGPE (GCR_BA+0x028) +#define REG_GPIOHPE (GCR_BA+0x02C) +#define REG_GPIOIPE (GCR_BA+0x030) +#define REG_GTMP1 (GCR_BA+0x034) +#define REG_GTMP2 (GCR_BA+0x038) +#define REG_GTMP3 (GCR_BA+0x03C) + +#endif /* __ASM_ARCH_REGS_GCR_H */ -- 1.6.3.3
WARNING: multiple messages have this Message-ID (diff)
From: mcuos.com@gmail.com (Wan ZongShun) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM/nuc900: patch for adding the global control registers definition Date: Fri, 23 Jul 2010 21:38:27 +0800 [thread overview] Message-ID: <4C499B53.5090400@gmail.com> (raw) This patch is to add the global control registers definition, many drivers need it, such as usb driver,I need it to control usb phy open or close, so I sent this patch. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> --- arch/arm/mach-w90x900/include/mach/regs-gcr.h | 39 +++++++++++++++++++++++++ 1 files changed, 39 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-w90x900/include/mach/regs-gcr.h diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/include/mach/regs-gcr.h new file mode 100644 index 0000000..6087abd --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/regs-gcr.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-w90x900/include/mach/regs-gcr.h + * + * Copyright (c) 2010 Nuvoton technology corporation + * All rights reserved. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_REGS_GCR_H +#define __ASM_ARCH_REGS_GCR_H + +/* Global control registers */ + +#define GCR_BA W90X900_VA_GCR +#define REG_PDID (GCR_BA+0x000) +#define REG_PWRON (GCR_BA+0x004) +#define REG_ARBCON (GCR_BA+0x008) +#define REG_MFSEL (GCR_BA+0x00C) +#define REG_EBIDPE (GCR_BA+0x010) +#define REG_LCDDPE (GCR_BA+0x014) +#define REG_GPIOCPE (GCR_BA+0x018) +#define REG_GPIODPE (GCR_BA+0x01C) +#define REG_GPIOEPE (GCR_BA+0x020) +#define REG_GPIOFPE (GCR_BA+0x024) +#define REG_GPIOGPE (GCR_BA+0x028) +#define REG_GPIOHPE (GCR_BA+0x02C) +#define REG_GPIOIPE (GCR_BA+0x030) +#define REG_GTMP1 (GCR_BA+0x034) +#define REG_GTMP2 (GCR_BA+0x038) +#define REG_GTMP3 (GCR_BA+0x03C) + +#endif /* __ASM_ARCH_REGS_GCR_H */ -- 1.6.3.3
next reply other threads:[~2010-07-23 13:38 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2010-07-23 13:38 Wan ZongShun [this message] 2010-07-23 13:38 ` [PATCH] ARM/nuc900: patch for adding the global control registers definition Wan ZongShun
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=4C499B53.5090400@gmail.com \ --to=mcuos.com@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.