kernel panic

kernel panic

[Tigran Mkrtchyan]

This is pnfs-all-latest git fa5a03da84b02026396be0736288b3f4a8143ff2
$ uname -a
Linux anahit 2.6.35-pnfs-2 #22 SMP Fri Aug 27 17:47:27 CEST 2010 x86_64 
x86_64 x86_64 GNU/Linux
$

On server restart:

[624967.868286] BUG: unable to handle kernel NULL pointer dereference at 
(null)
[624967.868291] IP: [<ffffffffa0492f42>] nfs41_sequence_done+0x52/0x2e0 
[nfs]
[624967.868312] PGD 0
[624967.868315] Oops: 0002 [#1] SMP
[624967.868317] last sysfs file: 
/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/host8/target8:0:0/8:0:0:0/block/sdb/sdb1/stat
[624967.868321] CPU 0
[624967.868322] Modules linked in: nfs_layout_nfsv41_files snd_pcm_oss 
snd_mixer_oss snd_seq edd rpcsec_gss_krb5 vboxnetadp vboxnetflt nfs 
lockd fscache nfs_acl auth_rpcgss sunrpc vboxdrv cpufreq_conservative 
cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf fuse loop dm_mod 
snd_hda_codec_idt snd_usb_audio snd_hda_intel snd_hda_codec snd_hwdep 
iTCO_wdt snd_pcm sr_mod snd_timer iTCO_vendor_support snd_usbmidi_lib sg 
cdrom pcspkr serio_raw snd_rawmidi snd_seq_device ohci1394 ieee1394 
i2c_i801 button snd microcode e1000e snd_page_alloc ext4 jbd2 crc16 fan 
processor ide_pci_generic ide_core ata_generic pata_marvell thermal 
thermal_sys
[624967.868363]
[624967.868366] Pid: 2267, comm: rpciod/0 Tainted: G          I 
2.6.35-pnfs-2 #22 DX38BT/pczW1007
[624967.868368] RIP: 0010:[<ffffffffa0492f42>]  [<ffffffffa0492f42>] 
nfs41_sequence_done+0x52/0x2e0 [nfs]
[624967.868382] RSP: 0018:ffff880107e8dda0  EFLAGS: 00010246
[624967.868384] RAX: 0000000000000000 RBX: ffff88012d28ca98 RCX: 
0000000000000000
[624967.868386] RDX: 0000000000000000 RSI: ffff88012d28ca98 RDI: 
ffff880107c9e180
[624967.868388] RBP: ffff880107e8ddc0 R08: 0000000000000000 R09: 
0000000000000000
[624967.868391] R10: 0000000000000000 R11: 00000000ffffffff R12: 
ffff880107c9e180
[624967.868393] R13: 0000000000000001 R14: 0000000000000000 R15: 
ffff880116802300
[624967.868396] FS:  0000000000000000(0000) GS:ffff880001a00000(0000) 
knlGS:0000000000000000
[624967.868398] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[624967.868400] CR2: 0000000000000000 CR3: 00000000015c8000 CR4: 
00000000000406f0
[624967.868403] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 
0000000000000000
[624967.868405] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 
0000000000000400
[624967.868408] Process rpciod/0 (pid: 2267, threadinfo 
ffff880107e8c000, task ffff880116802300)
[624967.868410] Stack:
[624967.868411]  0000000000012300 ffff880107c9e180 ffff880022c5a000 
0000000000000001
[624967.868415] <0> ffff880107e8dde0 ffffffffa04934d0 ffff880107c9e180 
ffff880107c9e1f0
[624967.868419] <0> ffff880107e8de00 ffffffffa040ab17 0000000000000001 
ffff880107c9e180
[624967.868423] Call Trace:
[624967.868435]  [<ffffffffa04934d0>] 
nfs41_sequence_call_done+0x20/0x100 [nfs]
[624967.868447]  [<ffffffffa040ab17>] rpc_exit_task+0x27/0x60 [sunrpc]
[624967.868457]  [<ffffffffa040b322>] __rpc_execute+0xa2/0x290 [sunrpc]
[624967.868466]  [<ffffffffa040b510>] ? rpc_async_schedule+0x0/0x20 [sunrpc]
[624967.868475]  [<ffffffffa040b520>] rpc_async_schedule+0x10/0x20 [sunrpc]
[624967.868481]  [<ffffffff81059fed>] worker_thread+0x12d/0x1f0
[624967.868485]  [<ffffffff8105e530>] ? autoremove_wake_function+0x0/0x40
[624967.868488]  [<ffffffff81059ec0>] ? worker_thread+0x0/0x1f0
[624967.868491]  [<ffffffff8105e08e>] kthread+0x8e/0xa0
[624967.868495]  [<ffffffff81003b54>] kernel_thread_helper+0x4/0x10
[624967.868498]  [<ffffffff8105e000>] ? kthread+0x0/0xa0
[624967.868501]  [<ffffffff81003b50>] ? kernel_thread_helper+0x0/0x10
[624967.868503] Code: 08 80 fa 80 74 73 48 8b 0b 0f b6 c2 48 c1 e0 02 48 
03 41 60 8b 4b 0c 81 f9 e8 d8 ff ff 0f 84 26 01 00 00 85 c9 0f 85 fe 00 
00 00 <83> 00 01 48 8b 03 4c 8b 6b 10 4c 8b a0 38 02 00 00 49 8d bc 24
[624967.868532] RIP  [<ffffffffa0492f42>] nfs41_sequence_done+0x52/0x2e0 
[nfs]
[624967.868544]  RSP <ffff880107e8dda0>
[624967.868546] CR2: 0000000000000000
[624967.868548] ---[ end trace a7919e7f17c0a727 ]---


Tigran.

Re: kernel panic

[Benny Halevy]

On 2010-09-15 15:21, Tigran Mkrtchyan wrote:
> 
> This is pnfs-all-latest git fa5a03da84b02026396be0736288b3f4a8143ff2

Hmm, it's pnfs-all-2.6.35 by now :)
but nevertheless, the IP below doesn't seem to agree with the assembly
code for nfs41_sequence_done.
Do mind running gdb on your binary (fs/nfs/nfs.ko) and locating
the exact line and cpu instruction to see what's going on?

Thanks,

Benny

> $ uname -a
> Linux anahit 2.6.35-pnfs-2 #22 SMP Fri Aug 27 17:47:27 CEST 2010 x86_64 
> x86_64 x86_64 GNU/Linux
> $
> 
> On server restart:
> 
> [624967.868286] BUG: unable to handle kernel NULL pointer dereference at 
> (null)
> [624967.868291] IP: [<ffffffffa0492f42>] nfs41_sequence_done+0x52/0x2e0 
> [nfs]
> [624967.868312] PGD 0
> [624967.868315] Oops: 0002 [#1] SMP
> [624967.868317] last sysfs file: 
> /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/host8/target8:0:0/8:0:0:0/block/sdb/sdb1/stat
> [624967.868321] CPU 0
> [624967.868322] Modules linked in: nfs_layout_nfsv41_files snd_pcm_oss 
> snd_mixer_oss snd_seq edd rpcsec_gss_krb5 vboxnetadp vboxnetflt nfs 
> lockd fscache nfs_acl auth_rpcgss sunrpc vboxdrv cpufreq_conservative 
> cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf fuse loop dm_mod 
> snd_hda_codec_idt snd_usb_audio snd_hda_intel snd_hda_codec snd_hwdep 
> iTCO_wdt snd_pcm sr_mod snd_timer iTCO_vendor_support snd_usbmidi_lib sg 
> cdrom pcspkr serio_raw snd_rawmidi snd_seq_device ohci1394 ieee1394 
> i2c_i801 button snd microcode e1000e snd_page_alloc ext4 jbd2 crc16 fan 
> processor ide_pci_generic ide_core ata_generic pata_marvell thermal 
> thermal_sys
> [624967.868363]
> [624967.868366] Pid: 2267, comm: rpciod/0 Tainted: G          I 
> 2.6.35-pnfs-2 #22 DX38BT/pczW1007
> [624967.868368] RIP: 0010:[<ffffffffa0492f42>]  [<ffffffffa0492f42>] 
> nfs41_sequence_done+0x52/0x2e0 [nfs]
> [624967.868382] RSP: 0018:ffff880107e8dda0  EFLAGS: 00010246
> [624967.868384] RAX: 0000000000000000 RBX: ffff88012d28ca98 RCX: 
> 0000000000000000
> [624967.868386] RDX: 0000000000000000 RSI: ffff88012d28ca98 RDI: 
> ffff880107c9e180
> [624967.868388] RBP: ffff880107e8ddc0 R08: 0000000000000000 R09: 
> 0000000000000000
> [624967.868391] R10: 0000000000000000 R11: 00000000ffffffff R12: 
> ffff880107c9e180
> [624967.868393] R13: 0000000000000001 R14: 0000000000000000 R15: 
> ffff880116802300
> [624967.868396] FS:  0000000000000000(0000) GS:ffff880001a00000(0000) 
> knlGS:0000000000000000
> [624967.868398] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [624967.868400] CR2: 0000000000000000 CR3: 00000000015c8000 CR4: 
> 00000000000406f0
> [624967.868403] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 
> 0000000000000000
> [624967.868405] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 
> 0000000000000400
> [624967.868408] Process rpciod/0 (pid: 2267, threadinfo 
> ffff880107e8c000, task ffff880116802300)
> [624967.868410] Stack:
> [624967.868411]  0000000000012300 ffff880107c9e180 ffff880022c5a000 
> 0000000000000001
> [624967.868415] <0> ffff880107e8dde0 ffffffffa04934d0 ffff880107c9e180 
> ffff880107c9e1f0
> [624967.868419] <0> ffff880107e8de00 ffffffffa040ab17 0000000000000001 
> ffff880107c9e180
> [624967.868423] Call Trace:
> [624967.868435]  [<ffffffffa04934d0>] 
> nfs41_sequence_call_done+0x20/0x100 [nfs]
> [624967.868447]  [<ffffffffa040ab17>] rpc_exit_task+0x27/0x60 [sunrpc]
> [624967.868457]  [<ffffffffa040b322>] __rpc_execute+0xa2/0x290 [sunrpc]
> [624967.868466]  [<ffffffffa040b510>] ? rpc_async_schedule+0x0/0x20 [sunrpc]
> [624967.868475]  [<ffffffffa040b520>] rpc_async_schedule+0x10/0x20 [sunrpc]
> [624967.868481]  [<ffffffff81059fed>] worker_thread+0x12d/0x1f0
> [624967.868485]  [<ffffffff8105e530>] ? autoremove_wake_function+0x0/0x40
> [624967.868488]  [<ffffffff81059ec0>] ? worker_thread+0x0/0x1f0
> [624967.868491]  [<ffffffff8105e08e>] kthread+0x8e/0xa0
> [624967.868495]  [<ffffffff81003b54>] kernel_thread_helper+0x4/0x10
> [624967.868498]  [<ffffffff8105e000>] ? kthread+0x0/0xa0
> [624967.868501]  [<ffffffff81003b50>] ? kernel_thread_helper+0x0/0x10
> [624967.868503] Code: 08 80 fa 80 74 73 48 8b 0b 0f b6 c2 48 c1 e0 02 48 
> 03 41 60 8b 4b 0c 81 f9 e8 d8 ff ff 0f 84 26 01 00 00 85 c9 0f 85 fe 00 
> 00 00 <83> 00 01 48 8b 03 4c 8b 6b 10 4c 8b a0 38 02 00 00 49 8d bc 24
> [624967.868532] RIP  [<ffffffffa0492f42>] nfs41_sequence_done+0x52/0x2e0 
> [nfs]
> [624967.868544]  RSP <ffff880107e8dda0>
> [624967.868546] CR2: 0000000000000000
> [624967.868548] ---[ end trace a7919e7f17c0a727 ]---
> 
> 
> Tigran.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: kernel panic

[Tigran Mkrtchyan]

  On 09/16/2010 05:35 PM, Benny Halevy wrote:
> On 2010-09-15 15:21, Tigran Mkrtchyan wrote:
>> This is pnfs-all-latest git fa5a03da84b02026396be0736288b3f4a8143ff2
> Hmm, it's pnfs-all-2.6.35 by now :)

I already moved my desktop and 2.6.36-rc3 git 
7c40d303e13ec2f2e0b6cf217c008106b391d058
and farm nodes will be upgraded today.
> but nevertheless, the IP below doesn't seem to agree with the assembly
> code for nfs41_sequence_done.
> Do mind running gdb on your binary (fs/nfs/nfs.ko) and locating
I will do that next time. Unfortunately when I got your mail my system was
running newer kernel.

Thanks
    Tigran.

P.S: the rss feed from git does not show rebases and I am missing latest 
updates. Could you send a e-mail around whem you merge?
> the exact line and cpu instruction to see what's going on?
>
> Thanks,
>
> Benny
>
>> $ uname -a
>> Linux anahit 2.6.35-pnfs-2 #22 SMP Fri Aug 27 17:47:27 CEST 2010 x86_64
>> x86_64 x86_64 GNU/Linux
>> $
>>
>> On server restart:
>>
>> [624967.868286] BUG: unable to handle kernel NULL pointer dereference at
>> (null)
>> [624967.868291] IP: [<ffffffffa0492f42>] nfs41_sequence_done+0x52/0x2e0
>> [nfs]
>> [624967.868312] PGD 0
>> [624967.868315] Oops: 0002 [#1] SMP
>> [624967.868317] last sysfs file:
>> /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/host8/target8:0:0/8:0:0:0/block/sdb/sdb1/stat
>> [624967.868321] CPU 0
>> [624967.868322] Modules linked in: nfs_layout_nfsv41_files snd_pcm_oss
>> snd_mixer_oss snd_seq edd rpcsec_gss_krb5 vboxnetadp vboxnetflt nfs
>> lockd fscache nfs_acl auth_rpcgss sunrpc vboxdrv cpufreq_conservative
>> cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf fuse loop dm_mod
>> snd_hda_codec_idt snd_usb_audio snd_hda_intel snd_hda_codec snd_hwdep
>> iTCO_wdt snd_pcm sr_mod snd_timer iTCO_vendor_support snd_usbmidi_lib sg
>> cdrom pcspkr serio_raw snd_rawmidi snd_seq_device ohci1394 ieee1394
>> i2c_i801 button snd microcode e1000e snd_page_alloc ext4 jbd2 crc16 fan
>> processor ide_pci_generic ide_core ata_generic pata_marvell thermal
>> thermal_sys
>> [624967.868363]
>> [624967.868366] Pid: 2267, comm: rpciod/0 Tainted: G          I
>> 2.6.35-pnfs-2 #22 DX38BT/pczW1007
>> [624967.868368] RIP: 0010:[<ffffffffa0492f42>]  [<ffffffffa0492f42>]
>> nfs41_sequence_done+0x52/0x2e0 [nfs]
>> [624967.868382] RSP: 0018:ffff880107e8dda0  EFLAGS: 00010246
>> [624967.868384] RAX: 0000000000000000 RBX: ffff88012d28ca98 RCX:
>> 0000000000000000
>> [624967.868386] RDX: 0000000000000000 RSI: ffff88012d28ca98 RDI:
>> ffff880107c9e180
>> [624967.868388] RBP: ffff880107e8ddc0 R08: 0000000000000000 R09:
>> 0000000000000000
>> [624967.868391] R10: 0000000000000000 R11: 00000000ffffffff R12:
>> ffff880107c9e180
>> [624967.868393] R13: 0000000000000001 R14: 0000000000000000 R15:
>> ffff880116802300
>> [624967.868396] FS:  0000000000000000(0000) GS:ffff880001a00000(0000)
>> knlGS:0000000000000000
>> [624967.868398] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>> [624967.868400] CR2: 0000000000000000 CR3: 00000000015c8000 CR4:
>> 00000000000406f0
>> [624967.868403] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
>> 0000000000000000
>> [624967.868405] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
>> 0000000000000400
>> [624967.868408] Process rpciod/0 (pid: 2267, threadinfo
>> ffff880107e8c000, task ffff880116802300)
>> [624967.868410] Stack:
>> [624967.868411]  0000000000012300 ffff880107c9e180 ffff880022c5a000
>> 0000000000000001
>> [624967.868415]<0>  ffff880107e8dde0 ffffffffa04934d0 ffff880107c9e180
>> ffff880107c9e1f0
>> [624967.868419]<0>  ffff880107e8de00 ffffffffa040ab17 0000000000000001
>> ffff880107c9e180
>> [624967.868423] Call Trace:
>> [624967.868435]  [<ffffffffa04934d0>]
>> nfs41_sequence_call_done+0x20/0x100 [nfs]
>> [624967.868447]  [<ffffffffa040ab17>] rpc_exit_task+0x27/0x60 [sunrpc]
>> [624967.868457]  [<ffffffffa040b322>] __rpc_execute+0xa2/0x290 [sunrpc]
>> [624967.868466]  [<ffffffffa040b510>] ? rpc_async_schedule+0x0/0x20 [sunrpc]
>> [624967.868475]  [<ffffffffa040b520>] rpc_async_schedule+0x10/0x20 [sunrpc]
>> [624967.868481]  [<ffffffff81059fed>] worker_thread+0x12d/0x1f0
>> [624967.868485]  [<ffffffff8105e530>] ? autoremove_wake_function+0x0/0x40
>> [624967.868488]  [<ffffffff81059ec0>] ? worker_thread+0x0/0x1f0
>> [624967.868491]  [<ffffffff8105e08e>] kthread+0x8e/0xa0
>> [624967.868495]  [<ffffffff81003b54>] kernel_thread_helper+0x4/0x10
>> [624967.868498]  [<ffffffff8105e000>] ? kthread+0x0/0xa0
>> [624967.868501]  [<ffffffff81003b50>] ? kernel_thread_helper+0x0/0x10
>> [624967.868503] Code: 08 80 fa 80 74 73 48 8b 0b 0f b6 c2 48 c1 e0 02 48
>> 03 41 60 8b 4b 0c 81 f9 e8 d8 ff ff 0f 84 26 01 00 00 85 c9 0f 85 fe 00
>> 00 00<83>  00 01 48 8b 03 4c 8b 6b 10 4c 8b a0 38 02 00 00 49 8d bc 24
>> [624967.868532] RIP  [<ffffffffa0492f42>] nfs41_sequence_done+0x52/0x2e0
>> [nfs]
>> [624967.868544]  RSP<ffff880107e8dda0>
>> [624967.868546] CR2: 0000000000000000
>> [624967.868548] ---[ end trace a7919e7f17c0a727 ]---
>>
>>
>> Tigran.
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: kernel panic

[Benny Halevy]

On 2010-09-17 08:33, Tigran Mkrtchyan wrote:
>   On 09/16/2010 05:35 PM, Benny Halevy wrote:
>> On 2010-09-15 15:21, Tigran Mkrtchyan wrote:
>>> This is pnfs-all-latest git fa5a03da84b02026396be0736288b3f4a8143ff2
>> Hmm, it's pnfs-all-2.6.35 by now :)
> 
> I already moved my desktop and 2.6.36-rc3 git 
> 7c40d303e13ec2f2e0b6cf217c008106b391d058
> and farm nodes will be upgraded today.
>> but nevertheless, the IP below doesn't seem to agree with the assembly
>> code for nfs41_sequence_done.
>> Do mind running gdb on your binary (fs/nfs/nfs.ko) and locating
> I will do that next time. Unfortunately when I got your mail my system was
> running newer kernel.

OK, thanks for reporting!

> 
> Thanks
>     Tigran.
> 
> P.S: the rss feed from git does not show rebases and I am missing latest 
> updates. Could you send a e-mail around whem you merge?

Sure. No problem

Benny

>> the exact line and cpu instruction to see what's going on?
>>
>> Thanks,
>>
>> Benny
>>
>>> $ uname -a
>>> Linux anahit 2.6.35-pnfs-2 #22 SMP Fri Aug 27 17:47:27 CEST 2010 x86_64
>>> x86_64 x86_64 GNU/Linux
>>> $
>>>
>>> On server restart:
>>>
>>> [624967.868286] BUG: unable to handle kernel NULL pointer dereference at
>>> (null)
>>> [624967.868291] IP: [<ffffffffa0492f42>] nfs41_sequence_done+0x52/0x2e0
>>> [nfs]
>>> [624967.868312] PGD 0
>>> [624967.868315] Oops: 0002 [#1] SMP
>>> [624967.868317] last sysfs file:
>>> /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/host8/target8:0:0/8:0:0:0/block/sdb/sdb1/stat
>>> [624967.868321] CPU 0
>>> [624967.868322] Modules linked in: nfs_layout_nfsv41_files snd_pcm_oss
>>> snd_mixer_oss snd_seq edd rpcsec_gss_krb5 vboxnetadp vboxnetflt nfs
>>> lockd fscache nfs_acl auth_rpcgss sunrpc vboxdrv cpufreq_conservative
>>> cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf fuse loop dm_mod
>>> snd_hda_codec_idt snd_usb_audio snd_hda_intel snd_hda_codec snd_hwdep
>>> iTCO_wdt snd_pcm sr_mod snd_timer iTCO_vendor_support snd_usbmidi_lib sg
>>> cdrom pcspkr serio_raw snd_rawmidi snd_seq_device ohci1394 ieee1394
>>> i2c_i801 button snd microcode e1000e snd_page_alloc ext4 jbd2 crc16 fan
>>> processor ide_pci_generic ide_core ata_generic pata_marvell thermal
>>> thermal_sys
>>> [624967.868363]
>>> [624967.868366] Pid: 2267, comm: rpciod/0 Tainted: G          I
>>> 2.6.35-pnfs-2 #22 DX38BT/pczW1007
>>> [624967.868368] RIP: 0010:[<ffffffffa0492f42>]  [<ffffffffa0492f42>]
>>> nfs41_sequence_done+0x52/0x2e0 [nfs]
>>> [624967.868382] RSP: 0018:ffff880107e8dda0  EFLAGS: 00010246
>>> [624967.868384] RAX: 0000000000000000 RBX: ffff88012d28ca98 RCX:
>>> 0000000000000000
>>> [624967.868386] RDX: 0000000000000000 RSI: ffff88012d28ca98 RDI:
>>> ffff880107c9e180
>>> [624967.868388] RBP: ffff880107e8ddc0 R08: 0000000000000000 R09:
>>> 0000000000000000
>>> [624967.868391] R10: 0000000000000000 R11: 00000000ffffffff R12:
>>> ffff880107c9e180
>>> [624967.868393] R13: 0000000000000001 R14: 0000000000000000 R15:
>>> ffff880116802300
>>> [624967.868396] FS:  0000000000000000(0000) GS:ffff880001a00000(0000)
>>> knlGS:0000000000000000
>>> [624967.868398] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>>> [624967.868400] CR2: 0000000000000000 CR3: 00000000015c8000 CR4:
>>> 00000000000406f0
>>> [624967.868403] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
>>> 0000000000000000
>>> [624967.868405] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
>>> 0000000000000400
>>> [624967.868408] Process rpciod/0 (pid: 2267, threadinfo
>>> ffff880107e8c000, task ffff880116802300)
>>> [624967.868410] Stack:
>>> [624967.868411]  0000000000012300 ffff880107c9e180 ffff880022c5a000
>>> 0000000000000001
>>> [624967.868415]<0>  ffff880107e8dde0 ffffffffa04934d0 ffff880107c9e180
>>> ffff880107c9e1f0
>>> [624967.868419]<0>  ffff880107e8de00 ffffffffa040ab17 0000000000000001
>>> ffff880107c9e180
>>> [624967.868423] Call Trace:
>>> [624967.868435]  [<ffffffffa04934d0>]
>>> nfs41_sequence_call_done+0x20/0x100 [nfs]
>>> [624967.868447]  [<ffffffffa040ab17>] rpc_exit_task+0x27/0x60 [sunrpc]
>>> [624967.868457]  [<ffffffffa040b322>] __rpc_execute+0xa2/0x290 [sunrpc]
>>> [624967.868466]  [<ffffffffa040b510>] ? rpc_async_schedule+0x0/0x20 [sunrpc]
>>> [624967.868475]  [<ffffffffa040b520>] rpc_async_schedule+0x10/0x20 [sunrpc]
>>> [624967.868481]  [<ffffffff81059fed>] worker_thread+0x12d/0x1f0
>>> [624967.868485]  [<ffffffff8105e530>] ? autoremove_wake_function+0x0/0x40
>>> [624967.868488]  [<ffffffff81059ec0>] ? worker_thread+0x0/0x1f0
>>> [624967.868491]  [<ffffffff8105e08e>] kthread+0x8e/0xa0
>>> [624967.868495]  [<ffffffff81003b54>] kernel_thread_helper+0x4/0x10
>>> [624967.868498]  [<ffffffff8105e000>] ? kthread+0x0/0xa0
>>> [624967.868501]  [<ffffffff81003b50>] ? kernel_thread_helper+0x0/0x10
>>> [624967.868503] Code: 08 80 fa 80 74 73 48 8b 0b 0f b6 c2 48 c1 e0 02 48
>>> 03 41 60 8b 4b 0c 81 f9 e8 d8 ff ff 0f 84 26 01 00 00 85 c9 0f 85 fe 00
>>> 00 00<83>  00 01 48 8b 03 4c 8b 6b 10 4c 8b a0 38 02 00 00 49 8d bc 24
>>> [624967.868532] RIP  [<ffffffffa0492f42>] nfs41_sequence_done+0x52/0x2e0
>>> [nfs]
>>> [624967.868544]  RSP<ffff880107e8dda0>
>>> [624967.868546] CR2: 0000000000000000
>>> [624967.868548] ---[ end trace a7919e7f17c0a727 ]---
>>>
>>>
>>> Tigran.
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: Kernel panic

[Jan Kiszka]

On 13.11.23 10:21, Yao Yongxian wrote:
> 
> Hi all,
> 
> The kenel linux-4.19.89-ipipe-9-xenomai-3.1 (linux-4.19.89, ipipe-core-4.19.89-x86-9.patch, xenomai 3.1) encountered the following exception.
> 
> Is it a hardware issue or something else? Please give me some hints!
> 

If you only get that NMI, out of the blue, without other signs, this may
indeed be a hardware issue.

> Thanks.
> 
> 
> [62001.014286] Kernel panic - not syncing: NMI: Not continuing
> [62001.014286] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Tainted: P           O      4.19.89-ipipe-9-xenomai-3.1-20201027 #1
> [62001.014287] Hardware name: Supermicro Super Server/C422-SF, BIOS E906.1 04/27/2021
> [62001.014287] I-pipe domain: Linux
> [62001.014287] Call Trace:
> [62001.014288]  <NMI>
> [62001.014288]  dump_stack+0x98/0xb8
> [62001.014288]  panic+0xe7/0x236
> [62001.014288]  ? printk+0x53/0x6a
> [62001.014289]  nmi_panic.cold.10+0xc/0xc
> [62001.014289]  pci_serr_error+0x4d/0x60

This symbol /may/ point to PCI SERR#.

Jan

> [62001.014289]  default_do_nmi+0x165/0x170
> [62001.014289]  do_nmi+0x14e/0x190
> [62001.014290]  end_repeat_nmi+0x16/0x50
> [62001.014290] RIP: 0010:__ipipe_halt_root+0x2e/0x40
> [62001.014291] Code: 60 c5 01 00 65 48 8b 15 e8 75 fd 7e 48 01 d0 48 0f ba 30 00 48 83 78 08 00 75 10 85 ff 74 09 31 c0 89 c1 fb 0f 01 c9 c3 fb f4 <c3> e8 bc 14 0e 00 fb c3 66 2e 0f 1f 84 00 00 00 00 00 48 c7 87 48
> [62001.014291] RSP: 0018:ffffffff82003ea8 EFLAGS: 00000246
> [62001.014292] RAX: ffff88885fc1c560 RBX: 0000000000000000 RCX: 0000000000000246
> [62001.014292] RDX: ffff88885fc00000 RSI: ffffffff81e0f0a7 RDI: 0000000000000000
> [62001.014292] RBP: 0000000000000000 R08: ffff88885fc00000 R09: ffffc90005fc7e88
> [62001.014293] R10: 0000000000000000 R11: 000000000002b572 R12: ffffffff82011740
> [62001.014293] R13: ffffffff824f32e0 R14: 000000000000001f R15: 0000000000000000
> [62001.014293]  ? __ipipe_halt_root+0x2e/0x40
> [62001.014293]  ? __ipipe_halt_root+0x2e/0x40
> [62001.014294]  </NMI>
> [62001.014294]  default_idle+0x1e/0x170
> [62001.014294]  do_idle+0xe5/0x120
> [62001.014294]  cpu_startup_entry+0x6a/0x70
> [62001.014294]  start_kernel+0x4a1/0x4c1
> [62001.014295]  secondary_startup_64+0xa4/0xb0
> 
> 

-- 
Siemens AG, Technology
Linux Expert Center

Kernel panic

[Yao Yongxian]

Hi all,

The kenel linux-4.19.89-ipipe-9-xenomai-3.1 (linux-4.19.89, ipipe-core-4.19.89-x86-9.patch, xenomai 3.1) encountered the following exception.

Is it a hardware issue or something else? Please give me some hints!

Thanks.


[62001.014286] Kernel panic - not syncing: NMI: Not continuing
[62001.014286] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Tainted: P           O      4.19.89-ipipe-9-xenomai-3.1-20201027 #1
[62001.014287] Hardware name: Supermicro Super Server/C422-SF, BIOS E906.1 04/27/2021
[62001.014287] I-pipe domain: Linux
[62001.014287] Call Trace:
[62001.014288]  <NMI>
[62001.014288]  dump_stack+0x98/0xb8
[62001.014288]  panic+0xe7/0x236
[62001.014288]  ? printk+0x53/0x6a
[62001.014289]  nmi_panic.cold.10+0xc/0xc
[62001.014289]  pci_serr_error+0x4d/0x60
[62001.014289]  default_do_nmi+0x165/0x170
[62001.014289]  do_nmi+0x14e/0x190
[62001.014290]  end_repeat_nmi+0x16/0x50
[62001.014290] RIP: 0010:__ipipe_halt_root+0x2e/0x40
[62001.014291] Code: 60 c5 01 00 65 48 8b 15 e8 75 fd 7e 48 01 d0 48 0f ba 30 00 48 83 78 08 00 75 10 85 ff 74 09 31 c0 89 c1 fb 0f 01 c9 c3 fb f4 <c3> e8 bc 14 0e 00 fb c3 66 2e 0f 1f 84 00 00 00 00 00 48 c7 87 48
[62001.014291] RSP: 0018:ffffffff82003ea8 EFLAGS: 00000246
[62001.014292] RAX: ffff88885fc1c560 RBX: 0000000000000000 RCX: 0000000000000246
[62001.014292] RDX: ffff88885fc00000 RSI: ffffffff81e0f0a7 RDI: 0000000000000000
[62001.014292] RBP: 0000000000000000 R08: ffff88885fc00000 R09: ffffc90005fc7e88
[62001.014293] R10: 0000000000000000 R11: 000000000002b572 R12: ffffffff82011740
[62001.014293] R13: ffffffff824f32e0 R14: 000000000000001f R15: 0000000000000000
[62001.014293]  ? __ipipe_halt_root+0x2e/0x40
[62001.014293]  ? __ipipe_halt_root+0x2e/0x40
[62001.014294]  </NMI>
[62001.014294]  default_idle+0x1e/0x170
[62001.014294]  do_idle+0xe5/0x120
[62001.014294]  cpu_startup_entry+0x6a/0x70
[62001.014294]  start_kernel+0x4a1/0x4c1
[62001.014295]  secondary_startup_64+0xa4/0xb0

Re: Kernel Panic

[Greg KH]

On Tue, Oct 22, 2019 at 09:38:59AM +0000, Christophe DUMONT wrote:
> Hello, 
> 
>  
> 
> We downgraded to older kernel. We still facing the same Kernel Panic with different Kernel. 

Please contact your vendor for support, they are the only ones that can
support you as it's a very odd and old kernel you are using, and you are
paying for support for it already.  Might as well take advantage of it!

good luck!

greg k-h

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

RE: Kernel Panic

[Christophe DUMONT]

[-- Attachment #1.1.1.1: Type: text/plain, Size: 1332 bytes --]

Hello, 

 

We downgraded to older kernel. We still facing the same Kernel Panic with different Kernel. 

 

 

Christophe Dumont

Ligne directe : 0476842574



 

De : Valdis Kletnieks <valdis@vt.edu> De la part de Valdis Kletnieks
Envoyé : mercredi 16 octobre 2019 16:17
À : Christophe DUMONT <Christophe.DUMONT@yoni.fr>
Cc : kernelnewbies@kernelnewbies.org
Objet : Re: Kernel Panic

 

On Wed, 16 Oct 2019 07:34:01 -0000, Christophe DUMONT said: 

> What made me think about a memory leak is the message : Java Not Tainted 3.10.0-1062.1.1.el7.x86_64.=20 

That just tells you that the currently executing process was java. 

It says nothing at all about a memory leak, and as I already mentioned, if Java 
was leaking memory, it would almost certainly have been leaking memory on a 
previous kernel. 

The important part almost always isn't the running process, it's the kernel 
stack traceback, which in this case has 'futex' scribbled *all* over it. 

General rule of thumb: 

If you get more than one crash that has a similar traceback that points at a 
specific syscall, or file system driver, etc, the bug is almost guaranteed to 
be in that code. 

If you get a rash of crashes with *different* tracebacks, you probably have 
some other code that's overlaying memory. 

 

[-- Attachment #1.1.1.2: Type: text/html, Size: 6241 bytes --]

[-- Attachment #1.1.2: image001.png --]
[-- Type: image/png, Size: 8367 bytes --]

[-- Attachment #1.2: Type: application/pgp-signature, Size: 489 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Re: Kernel Panic

[Valentin Vidić]

On Thu, Oct 17, 2019 at 07:48:49AM +0000, Christophe DUMONT wrote:
> We can put aside Java Memory Leak.
> 
> I downgraded to kernel 3.10.0-957.27.2.el7.x86_64, there are no more crashes. 
> 
> The bug comes from ‘futex‘ syscall. What can causes that bug and how
> can i investigate ?

You can try to get the source for these two versions and compare. If the
diff is not too big it might give you some idea what changed...

-- 
Valentin

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

RE: Kernel Panic

[Christophe DUMONT]

[-- Attachment #1.1.1.1: Type: text/plain, Size: 1436 bytes --]

We can put aside Java Memory Leak.

I downgraded to kernel 3.10.0-957.27.2.el7.x86_64, there are no more crashes. 

 

The bug comes from ‘futex‘ syscall. What can causes that bug and how can i investigate ?

 

Christophe Dumont

Ligne directe : 0476842574



 

De : Valdis Kletnieks <valdis@vt.edu> De la part de Valdis Kletnieks
Envoyé : mercredi 16 octobre 2019 16:17
À : Christophe DUMONT <Christophe.DUMONT@yoni.fr>
Cc : kernelnewbies@kernelnewbies.org
Objet : Re: Kernel Panic

 

On Wed, 16 Oct 2019 07:34:01 -0000, Christophe DUMONT said: 

> What made me think about a memory leak is the message : Java Not Tainted 3.10.0-1062.1.1.el7.x86_64.=20 

That just tells you that the currently executing process was java. 

It says nothing at all about a memory leak, and as I already mentioned, if Java 
was leaking memory, it would almost certainly have been leaking memory on a 
previous kernel. 

The important part almost always isn't the running process, it's the kernel 
stack traceback, which in this case has 'futex' scribbled *all* over it. 

General rule of thumb: 

If you get more than one crash that has a similar traceback that points at a 
specific syscall, or file system driver, etc, the bug is almost guaranteed to 
be in that code. 

If you get a rash of crashes with *different* tracebacks, you probably have 
some other code that's overlaying memory. 

 

[-- Attachment #1.1.1.2: Type: text/html, Size: 6353 bytes --]

[-- Attachment #1.1.2: image001.png --]
[-- Type: image/png, Size: 8367 bytes --]

[-- Attachment #1.2: Type: application/pgp-signature, Size: 489 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Re: Kernel Panic

[Valdis Klētnieks]

[-- Attachment #1.1: Type: text/plain, Size: 876 bytes --]

On Wed, 16 Oct 2019 07:34:01 -0000, Christophe DUMONT said:

> What made me think about a memory leak is the message : Java Not Tainted 3.10.0-1062.1.1.el7.x86_64.=20

That just tells you that the currently executing process was java.

It says nothing at all about a memory leak, and as I already mentioned, if Java
was leaking memory, it would almost certainly have been leaking memory on a
previous kernel.

The important part almost always isn't the running process, it's the kernel
stack traceback, which in this case has 'futex' scribbled *all* over it.

General rule of thumb:

If you get more than one crash that has a similar traceback that points at a
specific syscall, or file system driver, etc, the bug is almost guaranteed to
be in that code.

If you get a rash of crashes with *different* tracebacks, you probably have
some other code that's overlaying memory.


[-- Attachment #1.2: Type: application/pgp-signature, Size: 832 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

RE: Kernel Panic

[Christophe DUMONT]

[-- Attachment #1.1.1.1: Type: text/plain, Size: 1263 bytes --]

Hello, 

 

What made me think about a memory leak is the message : Java Not Tainted 3.10.0-1062.1.1.el7.x86_64. 

I can’t access the bug report referenced : an active redhat subscription is needed !

 

Christophe Dumont

Ligne directe : 0476842574



 

De : Valdis Kletnieks <valdis@vt.edu> De la part de Valdis Kletnieks
Envoyé : mardi 15 octobre 2019 22:20
À : Christophe DUMONT <Christophe.DUMONT@yoni.fr>
Cc : kernelnewbies@kernelnewbies.org
Objet : Re: Kernel Panic

 

On Tue, 15 Oct 2019 07:21:18 -0000, Christophe DUMONT said: 

> We're facing Kernel Panic on CentOS 7 since upgrading from 3.10.0-957 to 3.10.0-1062. I'm thinking about a java memory leak, but not sure.

> Do you know what's going on here ? 

Well, what made you think "Java memory leak"? 

Java is userspace.  If it's leaking memory so far that the kernel has problems, it would probably: 

a) Have been leaking memory and causing problems in -957 as well 
b) Died in the OOM (Out Of Memory) code, rather than in the futex() system call. 

Yes, poorly written Java code will leak memory like a sieve, but this doesn't smell 
anything remotely like a memory leak. 

I agree with Valentin that it's probably the bug report he references. 

[-- Attachment #1.1.1.2: Type: text/html, Size: 6329 bytes --]

[-- Attachment #1.1.2: image001.png --]
[-- Type: image/png, Size: 8367 bytes --]

[-- Attachment #1.2: Type: application/pgp-signature, Size: 489 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Re: Kernel Panic

[Valdis Klētnieks]

[-- Attachment #1.1: Type: text/plain, Size: 728 bytes --]

On Tue, 15 Oct 2019 07:21:18 -0000, Christophe DUMONT said:

> We're facing Kernel Panic on CentOS 7 since upgrading from 3.10.0-957 to 3.10.0-1062. I'm thinking about a java memory leak, but not sure.
> Do you know what's going on here ?

Well, what made you think "Java memory leak"?

Java is userspace.  If it's leaking memory so far that the kernel has problems, it would probably:

a) Have been leaking memory and causing problems in -957 as well
b) Died in the OOM (Out Of Memory) code, rather than in the futex() system call.

Yes, poorly written Java code will leak memory like a sieve, but this doesn't smell
anything remotely like a memory leak.

I agree with Valentin that it's probably the bug report he references.

[-- Attachment #1.2: Type: application/pgp-signature, Size: 832 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Re: Kernel Panic

[Valentin Vidić]

On Tue, Oct 15, 2019 at 07:21:18AM +0000, Christophe DUMONT wrote:
> We're facing Kernel Panic on CentOS 7 since upgrading from 3.10.0-957 to 3.10.0-1062. I'm thinking about a java memory leak, but not sure.
> Do you know what's going on here ?

Looks similar to this: https://access.redhat.com/solutions/4164501

-- 
Valentin

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

Kernel Panic

[Christophe DUMONT]

[-- Attachment #1.1.1: Type: text/plain, Size: 253 bytes --]

Hello Kernel World,

We're facing Kernel Panic on CentOS 7 since upgrading from 3.10.0-957 to 3.10.0-1062. I'm thinking about a java memory leak, but not sure.
Do you know what's going on here ?

Christophe

[cid:image001.png@01D58339.CD24E760]

[-- Attachment #1.1.2: Type: text/html, Size: 3284 bytes --]

[-- Attachment #1.2: image001.png --]
[-- Type: image/png, Size: 52202 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@kernelnewbies.org
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

kernel panic

[Victor L]

Hi ,

I have Linux panic when started play music with one of my USB audio device.
first please see this logs:

[   71.684730] usbcore: registered new interface driver snd-usb-audio
[   73.835355] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000008
[   73.835412] IP: [<ffffffffc0b45d3c>]
snd_usb_endpoint_start+0x23c/0x2f0 [snd_usb_audio]
[   73.835414] PGD 0
[   73.835415]
[   73.835418] Oops: 0000 [#1] PREEMPT SMP
[   73.835482] Modules linked in: snd_usb_audio snd_usbmidi_lib
snd_hwdep snd_pcm_oss snd_mixer_oss snd_
pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device
snd_timer snd soundcore coretemp
iwl3945 iwlegacy i915 ehci_pci iTCO_wdt ehci_hcd pcmcia
iTCO_vendor_support kvm usbcore mac80211 e1000e
yenta_socket sr_mod pcmcia_rsrc cfg80211 pcmcia_core lpc_ich mfd_core
drm_kms_helper cdrom rfkill ata_ge
neric irqbypass ptp pps_core joydev sg pcspkr i2c_i801 drm battery
i2c_algo_bit ata_piix i2c_smbus usb_c
ommon shpchp rng_core ac acpi_cpufreq video button nls_utf8 cifs
sha256_ssse3 cmac md4 des_generic arc4
dns_resolver fscache sunrpc loop ip_tables x_tables autofs4 ext4 crc16
jbd2 crc32c_generic fscrypto ecb
glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache sd_mod
ahci libahci
[   73.835486]  evdev libata psmouse serio_raw scsi_mod thermal
[   73.835491] CPU: 1 PID: 1099 Comm: output:oops Not tainted 4.9.144-rt93 #1
[   73.835492] Hardware name: LENOVO 636962M/636962M, BIOS 7IET38WW
(1.19 ) 03/22/2011
[   73.835494] task: ffff8beb97502c40 task.stack: ffffac1901068000
[   73.835505] RIP: 0010:[<ffffffffc0b45d3c>]  [<ffffffffc0b45d3c>]
snd_usb_endpoint_start+0x23c/0x2f0 [
snd_usb_audio]
[   73.835507] RSP: 0000:ffffac190106bcc0  EFLAGS: 00010246
[   73.835508] RAX: 00000000ffffffea RBX: ffff8beb96c00000 RCX: 00000000ffffffea
[   73.835509] RDX: 0000000000000000 RSI: ffffffffc0b5bf98 RDI: ffff8beb99a18000
[   73.835511] RBP: 0000000000000002 R08: ffffffffc0b5a8d3 R09: 0000000000000000
[   73.835512] R10: 00000000fffffe00 R11: 0000000000000200 R12: ffff8beb96c80070
[   73.835513] R13: ffff8beb99a18000 R14: 0000000000000002 R15: 0000000000000000
[   73.835516] FS:  00007fdfedc66700(0000) GS:ffff8bebbf300000(0000)
knlGS:0000000000000000
[   73.835518] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   73.835519] CR2: 0000000000000008 CR3: 00000000b4ab6000 CR4: 0000000000000670
[   73.835520] Stack:
[   73.835525]  ffff8bebb8888c18 ffff8beb96c00000 0000000000000000
0000000000008002
[   73.835528]  00007fdfe40197d0 ffffffffc0b4e7cd ffff8bebb8888c18
ffff8beb974b2400
[   73.835531]  ffffffffc0b5088a ffff8beb0000ac44 ffff8bebb206d300
0000000000000000
[   73.835531] Call Trace:
[   73.835545]  [<ffffffffc0b4e7cd>] ? start_endpoints+0x3d/0x150
[snd_usb_audio]
[   73.835555]  [<ffffffffc0b5088a>] ? snd_usb_pcm_prepare+0x2ea/0x520
[snd_usb_audio]
[   73.835577]  [<ffffffffc0b0c176>] ?
snd_pcm_sw_params_user+0x56/0x90 [snd_pcm]
[   73.835584]  [<ffffffffc0b0b2d9>] ? snd_pcm_do_prepare+0x19/0x30 [snd_pcm]
[   73.835591]  [<ffffffffc0b09ea6>] ? snd_pcm_action_single+0x36/0x80 [snd_pcm]
[   73.835598]  [<ffffffffc0b0a311>] ?
snd_pcm_action_nonatomic+0x61/0x70 [snd_pcm]
[   73.835606]  [<ffffffffc0b0e219>] ?
snd_pcm_common_ioctl1+0x3a9/0xc60 [snd_pcm]
[   73.835674]  [<ffffffffc03a73ce>] ? ext4_file_write_iter+0x22e/0x370 [ext4]
[   73.835682]  [<ffffffffc0b0ecaa>] ?
snd_pcm_playback_ioctl1+0x1da/0x240 [snd_pcm]
[   73.835690]  [<ffffffffb9736a38>] ? __seccomp_filter+0x78/0x2a0
[   73.835698]  [<ffffffffc0b0ed33>] ?
snd_pcm_playback_ioctl+0x23/0x30 [snd_pcm]
[   73.835702]  [<ffffffffb982c9c4>] ? do_vfs_ioctl+0xa4/0x620
[   73.835706]  [<ffffffffb96033b4>] ? syscall_trace_enter+0x144/0x300
[   73.835709]  [<ffffffffb982cfb4>] ? SyS_ioctl+0x74/0x80
[   73.835711]  [<ffffffffb9603c56>] ? do_syscall_64+0x76/0x100
[   73.835717]  [<ffffffffb9c38b4e>] ? entry_SYSCALL_64_after_swapgs+0x58/0xc6
[   73.835747] Code: c0 d3 a8 b5 c0 83 f8 a6 74 15 83 f8 e0 49 c7 c0
8c a8 b5 c0 48 c7 c2 74 a8 b5 c0 4c
 0f 45 c2 48 8b 13 89 c1 48 c7 c6 98 bf b5 c0 <48> 8b 7a 08 89 ea 48
81 c7 98 00 00 00 e8 e2 7b f4 f8 f0
 80 63
[   73.835757] RIP  [<ffffffffc0b45d3c>]
snd_usb_endpoint_start+0x23c/0x2f0 [snd_usb_audio]
[   73.835758]  RSP <ffffac190106bcc0>
[   73.835759] CR2: 0000000000000008

I give you more detail, I have Debian Linux 4.9.144-rt93. I tested
under Debian 4.19 and Ubuntu same panic present.
Please help me to fix this problem, this device working fine under
Windows. I believe this problem in Linux audio driver.
I ready to provide any additional details if needs.

-- 
Regards,
Viktor L

Re: kernel panic

[Vasanthakumar Thiagarajan]

On 2018-07-09 06:30, Ansuel Smith wrote:
> By executing this command
> 
> cat /sys/kernel/debug/ieee80211/phy1/ath10k/tpc_stats
> cat /sys/kernel/debug/ieee80211/phy1/ath10k/tpc_stats_final i get
> can't access tpc_stats
> 
> Can someone check this?
> 
> i get this kernel panic
> 
> [ 1380.213122] Kernel panic - not syncing: stack-protector: Kernel
> stack is corrupted in: bf7fad20 [ 1380.213122] [ 1380.213187] CPU1:
> stopping [ 1380.222380] CPU: 1 PID: 3414 Comm: cat Not tainted 4.14.53
> #0 [ 1380.224892] Hardware name: Generic DT based system [
> 1380.230755] [<c030f8e8>] (unwind_backtrace) from [<c030bb2c>]
> (show_stack+0x14/0x20) [ 1380.235423] [<c030bb2c>] (show_stack) from
> [<c07846d8>] (dump_stack+0x88/0x9c) [ 1380.243314] [<c07846d8>]
> (dump_stack) from [<c030eb58>] (handle_IPI+0xf4/0x1a8) [ 1380.250343]
> [<c030eb58>] (handle_IPI) from [<c03014b8>] (gic_handle_irq+0x9c/0xb8)
> [ 1380.257546] [<c03014b8>] (gic_handle_irq) from [<c030c70c>]
> (__irq_svc+0x6c/0x90) [ 1380.265176] Exception stack(0xdb7cbce8 to
> 0xdb7cbd30) [ 1380.272753] bce0: 00000002 0000004e 00000000 00000004
> e0965145 bf809f78 [ 1380.277797] bd00: bf809f78 db7cbd8c 00000014
> e0a65000 c07dffa0 000ffecf 00000043 db7cbd38 [ 1380.285941] bd20:
> c079877c c0798780 80000013 ffffffff [ 1380.294096] [<c030c70c>]
> (__irq_svc) from [<c0798780>] (vsnprintf+0x74/0x490) [ 1380.299129]
> [<c0798780>] (vsnprintf) from [<c0798c34>] (scnprintf+0x28/0x54) [
> 1380.306328] [<c0798c34>] (scnprintf) from [<bf7e3334>]
> (ath10k_info+0xe8/0x1dc [ath10k_core]) [ 1380.313580] [<bf7e3334>]
> (ath10k_info [ath10k_core]) from [<bf7e534c>]
> (ath10k_tpc_stats_open+0x30c/0x40c [ath10k_core]) [ 1380.321853]
> [<bf7e534c>] (ath10k_tpc_stats_open [ath10k_core]) from [<c04a48c8>]
> (full_proxy_open+0x168/0x20c) [ 1380.332737] [<c04a48c8>]
> (full_proxy_open) from [<c03e39e4>]
> (do_dentry_open.constprop.4+0x208/0x344) [ 1380.342538] [<c03e39e4>]
> (do_dentry_open.constprop.4) from [<c03f6310>]
> (path_openat+0xd00/0x10b0) [ 1380.351821] [<c03f6310>] (path_openat)
> from [<c03f7624>] (do_filp_open+0x68/0xc0) [ 1380.360679] [<c03f7624>]
> (do_filp_open) from [<c03e4c8c>] (do_sys_open+0x16c/0x20c) [
> 1380.368233] [<c03e4c8c>] (do_sys_open) from [<c0307f60>]
> (ret_fast_syscall+0x0/0x54) [ 1380.375697] Rebooting in 3 seconds.. [
> 1384.384703] BUG: scheduling while atomic: swapper/0/0/0x00000100 [
> 1384.384732] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core
> ath pptp pppox ppp_mppe ppp_generic mac80211 iptable_nat ipt_REJECT
> ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic
> xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit
> xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack
> xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT
> xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial slhc
> nf_reject_ipv4 nf_nat_rtsp nf_nat_redirect nf_nat_masquerade_ipv4
> nf_conntrack_ipv4 nf_nat_ipv4 nf_log_ipv4 nf_flow_table_hw
> nf_flow_table nf_defrag_ipv4 nf_conntrack_rtsp nf_conntrack_rtcache
> nf_conntrack_netlink iptable_mangle iptable_filter ipt_ah ipt_ECN
> ip_tables crc_ccitt compat chaoskey fuse sch_cake act_skbedit
> act_mirred em_u32 cls_u32 [ 1384.437764] cls_tcindex cls_flow
> cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress ledtrig_usbport
> xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
> ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet
> ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip
> ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip
> ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set
> nfnetlink ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 ip6table_nat
> nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nf_nat nf_conntrack
> ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle
> ip6table_filter ip6_

Can you try with https://patchwork.kernel.org/patch/10356157, if it is
not already done?

Vasanth

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

kernel panic

[Ansuel Smith]

By executing this command

cat /sys/kernel/debug/ieee80211/phy1/ath10k/tpc_stats
cat /sys/kernel/debug/ieee80211/phy1/ath10k/tpc_stats_final i get
can't access tpc_stats

Can someone check this?

i get this kernel panic

[ 1380.213122] Kernel panic - not syncing: stack-protector: Kernel
stack is corrupted in: bf7fad20 [ 1380.213122] [ 1380.213187] CPU1:
stopping [ 1380.222380] CPU: 1 PID: 3414 Comm: cat Not tainted 4.14.53
#0 [ 1380.224892] Hardware name: Generic DT based system [
1380.230755] [<c030f8e8>] (unwind_backtrace) from [<c030bb2c>]
(show_stack+0x14/0x20) [ 1380.235423] [<c030bb2c>] (show_stack) from
[<c07846d8>] (dump_stack+0x88/0x9c) [ 1380.243314] [<c07846d8>]
(dump_stack) from [<c030eb58>] (handle_IPI+0xf4/0x1a8) [ 1380.250343]
[<c030eb58>] (handle_IPI) from [<c03014b8>] (gic_handle_irq+0x9c/0xb8)
[ 1380.257546] [<c03014b8>] (gic_handle_irq) from [<c030c70c>]
(__irq_svc+0x6c/0x90) [ 1380.265176] Exception stack(0xdb7cbce8 to
0xdb7cbd30) [ 1380.272753] bce0: 00000002 0000004e 00000000 00000004
e0965145 bf809f78 [ 1380.277797] bd00: bf809f78 db7cbd8c 00000014
e0a65000 c07dffa0 000ffecf 00000043 db7cbd38 [ 1380.285941] bd20:
c079877c c0798780 80000013 ffffffff [ 1380.294096] [<c030c70c>]
(__irq_svc) from [<c0798780>] (vsnprintf+0x74/0x490) [ 1380.299129]
[<c0798780>] (vsnprintf) from [<c0798c34>] (scnprintf+0x28/0x54) [
1380.306328] [<c0798c34>] (scnprintf) from [<bf7e3334>]
(ath10k_info+0xe8/0x1dc [ath10k_core]) [ 1380.313580] [<bf7e3334>]
(ath10k_info [ath10k_core]) from [<bf7e534c>]
(ath10k_tpc_stats_open+0x30c/0x40c [ath10k_core]) [ 1380.321853]
[<bf7e534c>] (ath10k_tpc_stats_open [ath10k_core]) from [<c04a48c8>]
(full_proxy_open+0x168/0x20c) [ 1380.332737] [<c04a48c8>]
(full_proxy_open) from [<c03e39e4>]
(do_dentry_open.constprop.4+0x208/0x344) [ 1380.342538] [<c03e39e4>]
(do_dentry_open.constprop.4) from [<c03f6310>]
(path_openat+0xd00/0x10b0) [ 1380.351821] [<c03f6310>] (path_openat)
from [<c03f7624>] (do_filp_open+0x68/0xc0) [ 1380.360679] [<c03f7624>]
(do_filp_open) from [<c03e4c8c>] (do_sys_open+0x16c/0x20c) [
1380.368233] [<c03e4c8c>] (do_sys_open) from [<c0307f60>]
(ret_fast_syscall+0x0/0x54) [ 1380.375697] Rebooting in 3 seconds.. [
1384.384703] BUG: scheduling while atomic: swapper/0/0/0x00000100 [
1384.384732] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core
ath pptp pppox ppp_mppe ppp_generic mac80211 iptable_nat ipt_REJECT
ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic
xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit
xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack
xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT
xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial slhc
nf_reject_ipv4 nf_nat_rtsp nf_nat_redirect nf_nat_masquerade_ipv4
nf_conntrack_ipv4 nf_nat_ipv4 nf_log_ipv4 nf_flow_table_hw
nf_flow_table nf_defrag_ipv4 nf_conntrack_rtsp nf_conntrack_rtcache
nf_conntrack_netlink iptable_mangle iptable_filter ipt_ah ipt_ECN
ip_tables crc_ccitt compat chaoskey fuse sch_cake act_skbedit
act_mirred em_u32 cls_u32 [ 1384.437764] cls_tcindex cls_flow
cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress ledtrig_usbport
xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport
ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet
ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip
ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip
ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set
nfnetlink ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 ip6table_nat
nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nf_nat nf_conntrack
ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle
ip6table_filter ip6_

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: Kernel Panic

[Jason A. Donenfeld]

Hey Sam,

This will be fixed in 4.9. The fix might be backported to 4.8, but
maybe not. Anyway, I think 4.9 will be out pretty soon, so sit tight.

Jason

Re: Kernel Panic

[Jason A. Donenfeld]

Oh, hah, looks like we're a bit late to the party:

https://git.zx2c4.com/linux/commit/?id=c8467f7a3620698bf3c22f0e199b550fb611a8ae

It's already gone!

Re: Kernel Panic

[Jason A. Donenfeld]

On Fri, Dec 9, 2016 at 1:11 PM, Brad Spengler <spender@grsecurity.net> wrote:
> It's not potentially, it is trouble.  That code didn't use to be there
> btw, that optimization was introduced sometime between 3.14 and 4.4.
> So you could take your pick I guess, either that code is wrong or yours
> is wrong ;)  As a third-party module generally that makes your code
> "wrong" (because it being fixed in 4.9 won't help all the other versions
> out there that exist) but I do indeed pass through the original buffer
> through the rest of the function, as it's only the virt_to_page that's
> the problem.

It was added with v4.0-6954-g74412fd5d71b, so I guess this means it
arrived at 4.1.

Quite clearly the kernel code is "wrong", since the vast majority of
other callers in the kernel also use it with the quite reasonable
assumption that simple memcpy is stack-safe. When all of the consumers
assume a function will work in a particular way, and then upstream
tries to "optimize" the function and breaks things, that usually means
it's a problem with the optimization, not with the consumers.

Anyway, what I suspect the upstream response will be is that since
this is just a check of equality of addresses, with no dereferencing,
it will always (?) just be false for stack addresses, and so there's
no functional detriment, despite it being not correct. Or some boring
reasoning along these lines.

But anyway, splitting hairs... I'll monitor the grsec changelog and
ping the guy on the wireguard mailing list who ran into the issue when
it's fixed.

Re: Kernel Panic

[Jason A. Donenfeld]

Hey Brad,

On Fri, Dec 9, 2016 at 12:16 AM, Brad Spengler <spender@grsecurity.net> wrote:
> I see now, but your code is still wrong as it's relying on undefined
> behavior of the API.  Anyway, I will work around your incorrect code
> in the next patch (or more likely with our 4.9 patch) -- also don't
> rely on looking at other code as evidence of yours being correct,
> just look at all the examples being fixed in 4.9 as evidence ;)

I think actually the API was designed with the very purpose of copying
to stack buffers in mind. It was quite clearly made for MAC checks.
There's no way in hell I'm going to kmalloc just to check a MAC. The
intent of the function is correct, but along the way upstream tried to
add an optimization, that killed the correctness of it.

In theory, the function should map the DMA region to some accessible
virtual addresses, and then byte by byte (or word by word) memcpy data
from those addresses to some user supplied buffer. That user supplied
buffer can be a stack buffer. There's no way that that's disallowed.
The function should essentially read a word from the DMA vaddr into a
register, and then write a word into the stack buffer from a register.
This is kosher. But things get messed up with the kernel's
optimization for this. I'll paste the code line by line below and
annotate it to make it clear:

> void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg,
>                               unsigned int start, unsigned int nbytes, int out)

buf can be anything, including a stack address.
sg is the DMA regions, which shouldn't include stack addresses.
start and nbytes are offset and length.
out controls the direction of the memcpy.

> {
>         struct scatter_walk walk;
>         struct scatterlist tmp[2];
>
>         if (!nbytes)
>                 return;
>
>         sg = scatterwalk_ffwd(tmp, sg, start);

So far so good. We're only doing ffwd on the non-stack DMA regions.

>
>         if (sg_page(sg) == virt_to_page(buf) &&
>             sg->offset == offset_in_page(buf))
>                 return;

Here's where we potentially get into trouble. In an effort to optimize
this function, to prevent overwriting a region with its own data, the
kernel developers introduced this short circuit. The problem is, it's
perhaps not correct to use this kind of optimization if buf is on the
stack.

But this optimization is actually just totally incorrect. It's
entirely possible that while sg and buf might _start_ at the same
place, there's no guarantee that they'll end at the same place. buf
could extend along a contiguous region, while sg has some other
fragments.

I'll write to LKML about this. But I think if you'd like grsecurity to
be the most "correct", the easiest way to fix this would be to just
remove this wrong optimization. Don't go patching all the consumers of
this function; that's not correct. Instead just fix the brokenness of
the actual function.

>
>         scatterwalk_start(&walk, sg);

Fine, only touches sg.

>         scatterwalk_copychunks(buf, &walk, nbytes, out);

Here's where things could become controversial, since we're passing
buf to a scatterwalk family function. But let's see what this actually
does next.

>         scatterwalk_done(&walk, out, 0);

Fine.
> }


> void scatterwalk_copychunks(void *buf, struct scatter_walk *walk,
>                             size_t nbytes, int out)

buf is our stack buffer.
walk is our non-stack DMA regions.
nbytes is length.
out is direction.

> {
>         for (;;) {
>                 unsigned int len_this_page = scatterwalk_pagelen(walk);
>                 u8 *vaddr;
>
>                 if (len_this_page > nbytes)
>                         len_this_page = nbytes;
>
>                 if (out != 2) {
>                         vaddr = scatterwalk_map(walk);

All this is fine. It only touches walk thus far, which is all
non-stack. What we're left with is a vaddr mapping of the DMA region.

>                         memcpy_dir(buf, vaddr, len_this_page, out);

Maybe this could become controversial, but when I paste the function
below, you'll see it's fine.

>                         scatterwalk_unmap(vaddr);
>                 }
>
>                 scatterwalk_advance(walk, len_this_page);
>
>                 if (nbytes == len_this_page)
>                         break;

Only deals with the non-stack DMA regions, fine.

>
>                 buf += len_this_page;

Touching the stack address pointer, but pretty clear this is okay.

>                 nbytes -= len_this_page;
>
>                 scatterwalk_pagedone(walk, out & 1, 1);
>         }
> }

Only touching the non-stack DMA regions.

Onto that potentially scandalous memcpy:

> static inline void memcpy_dir(void *buf, void *sgdata, size_t nbytes, int out)

buf is our stack buffer.
sgdata is our non-stack DMA region mapped to a vaddr.
nbytes is length.
out is direction.

> {
>         void *src = out ? buf : sgdata;
>         void *dst = out ? sgdata : buf;

Now we know who the src and dst are based on the direction.

>
>         memcpy(dst, src, nbytes);

And voila! A simple memcpy. This is either reading stack to register
and writing register to DMA vaddr, or reading DMA vaddr to register
and writing register to stack. Totally uncontroversial.

> }


So anyway, I think you'll agree things are fine, once you remove the
bogus optimization. Meanwhile I'll write to LKML about that for
mainline kernel. Hopefully for the next grsec 4.8 patch you can just
get rid of the optimization too and make things work again.

Jason

Re: Kernel Panic

[Jason A. Donenfeld]

Hey Spender, Pipacs,

On Wed, Dec 7, 2016 at 1:44 AM, PaX Team <pageexec@freemail.hu> wrote:
> that's is your problem, DMA is forbidden to/from the stack in linux,
> Documentation/DMA-API-HOWTO.txt says this:

I realize that you shouldn't shove stack addresses inside
scattergather lists and do DMA with them. I certainly don't do this.
I've read the various parts of the kernel that erroneously do, and
I've looked at the million little grsec patches that replace these
with kmalloc everywhere. That's not what's going on here, however.

In this case, I'm hitting the bug with scatterwalk_map_and_copy, a
function designed to copy bytes out of a DMA region to put them into
any address, even a stack one, for CPU manipulation. The
implementation maps the DMA region, and then essentially calls memcpy
between that region and my stack buffer. This kind of usage certainly
must be permitted.

The place where kstackoverflow gets involved in
scatterwalk_map_and_copy is a small optimization in which the function
exits early if the destination regioin is the same as the source
region. It compares these values by calling virt_to_page and checking
those, and then calling offset_in_page and checking those. But this
doesn't mean anybody is DMAing with the stack.

Grepping the whole tree for other uses of scatterwalk_map_and_copy
indicate that it is widely used as a means of copying stack data to
and from DMA regions with this safe memcpy. For example,
arch/arm64/crypto/aes-ce-ccm-glue.c:

        /* copy authtag to end of dst */
       scatterwalk_map_and_copy(mac, dst, req->cryptlen,
crypto_aead_authsize(aead), 1);

        /* compare calculated auth tag with the stored one */
        scatterwalk_map_and_copy(buf, src, req->cryptlen - authsize,
authsize, 0);
        if (crypto_memneq(mac, buf, authsize))


Not only is `mac` a stack buffer, but it's being used for the same
functional purpose as me -- copying the authtag to/from the stack for
checking or adding.

Looking at the grsec sources for these uses of
scatterwalk_map_and_copy, it doesn't appear that the usual kmalloc
fixup is being applied, which likely indicates you didn't think it was
a problem either.

So -- I think this might be a grsec bug. Or am I still mistaken?

Jason

Re: Kernel Panic

[PaX Team]

On 6 Dec 2016 at 23:39, Jason A. Donenfeld wrote:

[added spender to CC as it's his feature in grsec]

> Hey PaXTeam,
> 
> I tracked down Samuel's bug to this line in crypto/scatterwalk.c:
>         if (sg_page(sg) == virt_to_page(realbuf) &&
> 
> virt_to_page is redefined for CONFIG_GRKERNSEC_KSTACKOVERFLOW:
> 
> #define virt_to_page(kaddr)     \
>        ({ \
>                const void *__kaddr = (const void *)(kaddr); \
>                BUG_ON(!virt_addr_valid(__kaddr)); \
>                pfn_to_page(__pa(__kaddr) >> PAGE_SHIFT); \
>        })
> 
> So that's where the bug is hit. Now why is this happening?
> 
> I call scatterwalk_map_and_copy to read or write from or to a stack
> buffer

that's is your problem, DMA is forbidden to/from the stack in linux,
Documentation/DMA-API-HOWTO.txt says this:

   This rule also means that you may use neither kernel image addresses
   (items in data/text/bss segments), nor module image addresses, nor
   stack addresses for DMA.

> from a scattergather list, inside some crypto code that does
> MAC checking. When virt_addr_valid(__kaddr) returns false, it is only
> after PaX has additionally messed with its value. A few lines above
> the call to virt_to_page is:
> 
> #ifdef CONFIG_GRKERNSEC_KSTACKOVERFLOW
>        if (object_starts_on_stack(buf))
>                realbuf = buf - current->stack + current->lowmem_stack;
> #endif
> 
> Presumably this condition winds up being true, and then that
> arithmetic is wrong somehow. Alternatively, that condition isn't true
> due to a bug in object_starts_on_stack, and that arithmetic doesn't
> run when it needs to run.
> 
> Samuel reported that the problem did not exist on 4.7 but does exist
> on 4.8. If my memory serves me correctly, 4.8 introduced virtually
> mapped stacks. Could it be that this virtual mapping now eliminates
> the need for that arithmetic?

upstream will have 'virtually mapped stacks' (stupid name btw, stack is
always virtually mapped on MMU-capable systems :) as of 4.9 only, what
you're seeing above is grsec's KSTACKOVERFLOW feature which had a little
bonus added in 4.8 to handle (and detect the abuse of) IRQ stacks as well.

> Regards,
> Jason

Re: Kernel Panic

[Jason A. Donenfeld]

Hey PaXTeam,

I tracked down Samuel's bug to this line in crypto/scatterwalk.c:
        if (sg_page(sg) == virt_to_page(realbuf) &&

virt_to_page is redefined for CONFIG_GRKERNSEC_KSTACKOVERFLOW:

#define virt_to_page(kaddr)     \
       ({ \
               const void *__kaddr = (const void *)(kaddr); \
               BUG_ON(!virt_addr_valid(__kaddr)); \
               pfn_to_page(__pa(__kaddr) >> PAGE_SHIFT); \
       })

So that's where the bug is hit. Now why is this happening?

I call scatterwalk_map_and_copy to read or write from or to a stack
buffer from a scattergather list, inside some crypto code that does
MAC checking. When virt_addr_valid(__kaddr) returns false, it is only
after PaX has additionally messed with its value. A few lines above
the call to virt_to_page is:

#ifdef CONFIG_GRKERNSEC_KSTACKOVERFLOW
       if (object_starts_on_stack(buf))
               realbuf = buf - current->stack + current->lowmem_stack;
#endif

Presumably this condition winds up being true, and then that
arithmetic is wrong somehow. Alternatively, that condition isn't true
due to a bug in object_starts_on_stack, and that arithmetic doesn't
run when it needs to run.

Samuel reported that the problem did not exist on 4.7 but does exist
on 4.8. If my memory serves me correctly, 4.8 introduced virtually
mapped stacks. Could it be that this virtual mapping now eliminates
the need for that arithmetic?

Regards,
Jason

Re: Kernel Panic

[Jason A. Donenfeld]

[-- Attachment #1: Type: text/plain, Size: 1661 bytes --]

Hi Samuel,

Thanks for the extra info. I'm CCing PaXTeam on this, as likely it has
something to do with changes to PaX. I'll flip through the logs and
source and see if I can figure it out.

Regards,
Jason

On Tue, Dec 6, 2016 at 7:26 PM, Samuel Holland <samuel@sholland.org> wrote:
> Hello,
>
> (forgot the list, sorry for the duplicate)
>
> On 12/06/2016 12:19 PM, Jason A. Donenfeld wrote:
>>
>> I noticed you're using "4.8.11-hardened". What kernel is this
>> actually? Grsecurity?
>
>
> Yes, this is the =sys-kernel/hardened-sources-4.8.11 from Gentoo.
> Attached is my kernel configuration.
>
> Some additional information: Both this snapshot (0.0.20161129) and the
> previous one work fine with =sys-kernel/hardened-sources-4.7.10
> (effectively the same kernel config), so I have downgraded to that as a
> workaround.
>
> I didn't get netconsole set up until after about the third or fourth
> panic. The top line from the earlier backtraces was
> curve25519_generate_public for all of them I believe.
>
>> Jason
>
>
> Thanks,
> Samuel


On Tue, Dec 6, 2016 at 7:23 AM, Samuel Holland <samuel@sholland.org> wrote:
> Hello,
>
> I'm getting a reproducable kernel panic with WireGuard snapshot 20161129
> and Gentoo's hardened-sources 4.8.11 about one minute after boot
> (persistent keepalive is set to 25 seconds). Netconsole output is
> attached from three consecutive panics. For the first, since I have the
> interface start on boot, I had to rmmod wireguard to enable netconsole,
> and modprobe it again to prompt the panic. For the second two I was able
> to repeat my commands fast enough to catch the panic happen on its own.
>
> Regards,
> Samuel

[-- Attachment #2: bug.dmesg --]
[-- Type: application/octet-stream, Size: 19338 bytes --]

6,785,188154370,-;netconsole: network logging has already started
6,786,197345837,-;wireguard: WireGuard experimental-0.0.20161129 loaded. See www.wireguard.io for information.
6,787,197345997,-;wireguard: Copyright (C) 2015-2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
4,795,225469782,-;------------[ cut here ]------------
2,796,225472396,-;kernel BUG at crypto/scatterwalk.c:77!
4,797,225474985,-;invalid opcode: 0000 [#1] SMP
4,798,225477551,c;Modules linked in:
4,799,225477595,+; wireguard(O)
4,800,225477622,+; iwldvm
4,801,225477643,+; mac80211
4,802,225477739,+; snd_hda_codec_hdmi
4,803,225477771,+; snd_hda_codec_generic
4,804,225477804,+; i915
4,805,225477822,+; snd_hda_intel
4,806,225477849,+; snd_hda_codec
4,807,225477874,+; iwlwifi
4,808,225477898,+; snd_hwdep
4,809,225477921,+; snd_hda_core
4,810,225477947,+; cfg80211
4,811,225480566,+; thinkpad_acpi
4,812,225480593,+; snd_pcm
4,813,225480615,+; nvram
4,814,225480634,+; rfkill
4,815,225480654,+; snd_timer
4,816,225480744,+; input_leds
4,817,225480769,+; mei_me
4,818,225480789,+; led_class
4,819,225480812,+; snd
4,820,225480831,+; mei
4,821,225480850,+; intel_gtt
4,822,225480874,+; [last unloaded: wireguard]
4,823,225480911,+;
4,824,225483628,-;CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O    4.8.11-hardened #1
4,825,225486483,-;Hardware name: LENOVO 4290AD6/4290AD6, BIOS 8DET72WW (1.42 ) 02/18/2016
4,826,225489355,-;task: ffffffff81e05a00 task.stack: ffffffff81e00000
4,827,225492211,c;RIP: 0010:[<ffffffff8146f7bc>]
4,828,225492275,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,829,225495162,-;RSP: 0018:ffffc90000003778  EFLAGS: 00010246
4,830,225498051,-;RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000024
4,831,225500939,-;RDX: 0000000000000410 RSI: 0000000000000000 RDI: 000041000000394c
4,832,225503811,-;RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
4,833,225506683,-;R10: ffffc90000003788 R11: 000000002e3bfb2e R12: ffffea0008430780
4,834,225509566,-;R13: ffffc9000000394c R14: ffffc9000000394c R15: ffffc90000003788
4,835,225512461,-;FS:  0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000
4,836,225515343,-;CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
4,837,225518254,-;CR2: 0000002c963d72d0 CR3: 0000000001f67000 CR4: 00000000000606f0
4,838,225521123,-;Stack:
4,839,225523978,c; 0a3fc2490e75ef00
4,840,225524023,+; 001745e901e0860b
4,841,225524053,+; ffffea0008430782
4,842,225524082,+; 00000010000000c0
4,843,225524111,+;
4,844,225526973,c; 0000000000000000
4,845,225527016,+; 0000000000000000
4,846,225527045,+; 0000000000000002
4,847,225527074,+; 0000000000000000
4,848,225527102,+;
4,849,225529985,c; 0000000000000000
4,850,225530028,+; 0000000000000000
4,851,225530057,+; ffffc9000000398c
4,852,225530087,+; ffffc90000003a50
4,853,225530114,+;
4,854,225532937,-;Call Trace:
4,855,225535766,c; <IRQ>
4,856,225535814,-; [<ffffffffa0577d23>] ? chacha20poly1305_encrypt_sg+0x423/0x550 [wireguard]
4,857,225538747,-; [<ffffffffa01bdfc4>] ? iwl_trans_pcie_tx+0xd64/0x12d0 [iwlwifi]
4,858,225541716,-; [<ffffffffa0568e68>] ? packet_create_data+0x398/0x690 [wireguard]
4,859,225544705,-; [<ffffffffa0569e90>] ? packet_send_queue+0x220/0x670 [wireguard]
4,860,225547694,-; [<ffffffff814e6fe6>] ? __list_add+0x16/0x40
4,861,225550640,-; [<ffffffffa0569d23>] ? packet_send_queue+0xb3/0x670 [wireguard]
4,862,225553559,-; [<ffffffffa05674f7>] ? noise_handshake_begin_session+0xce7/0xf90 [wireguard]
4,863,225556518,-; [<ffffffff81848f92>] ? dev_hard_start_xmit+0x92/0x1e0
4,864,225559482,-; [<ffffffff818496a2>] ? __dev_queue_xmit+0x4f2/0x5b0
4,865,225562444,-; [<ffffffff819213ce>] ? ip6_finish_output2+0x17e/0x470
4,866,225565413,-; [<ffffffff8195cd76>] ? ipv6_confirm+0x56/0x110
4,867,225568372,-; [<ffffffff8188a9c4>] ? nf_iterate+0x54/0x70
4,868,225571314,-; [<ffffffff81923bda>] ? ip6_output+0x3a/0xf0
4,869,225574248,-; [<ffffffff81923ab0>] ? ip6_fragment+0x980/0x980
4,870,225577203,-; [<ffffffff8193990a>] ? NF_HOOK_THRESH.constprop.22+0x2a/0xa0
4,871,225580158,-; [<ffffffff819393e0>] ? compat_ipv6_setsockopt+0xb0/0xb0
4,872,225583106,-; [<ffffffff81939b0e>] ? ndisc_send_skb+0x18e/0x2d0
4,873,225586071,-; [<ffffffff8192b314>] ? addrconf_rs_timer+0x104/0x150
4,874,225589061,-; [<ffffffff8192b210>] ? ipv6_get_lladdr+0xb0/0xb0
4,875,225592053,-; [<ffffffff8113385b>] ? call_timer_fn+0x2b/0x110
4,876,225595031,-; [<ffffffff811340b8>] ? run_timer_softirq+0x208/0x490
4,877,225598024,-; [<ffffffff81144620>] ? tick_sched_do_timer+0x30/0x30
4,878,225601022,-; [<ffffffff81144653>] ? tick_sched_timer+0x33/0x60
4,879,225604104,-; [<ffffffff81135da8>] ? __hrtimer_run_queues+0xe8/0x260
4,880,225607105,-; [<ffffffff810dfdaa>] ? __do_softirq+0xea/0x280
4,881,225610075,-; [<ffffffff810e006c>] ? irq_exit+0x8c/0x90
4,882,225613018,-; [<ffffffff8108d099>] ? smp_apic_timer_interrupt+0x39/0x50
4,883,225615985,-; [<ffffffff81990bdb>] ? apic_timer_interrupt+0x8b/0x90
4,884,225618849,c; <EOI>
4,885,225618889,-; [<ffffffff817dea9e>] ? cpuidle_enter_state+0x13e/0x2c0
4,886,225621677,-; [<ffffffff8111a6fe>] ? cpu_startup_entry+0x25e/0x300
4,887,225624420,-; [<ffffffff81fdfee5>] ? 0xffffffff81fdfee5
4,888,225627115,-; [<ffffffff81fdf120>] ? 0xffffffff81fdf120
4,889,225629761,-; [<ffffffff81fdf3bc>] ? 0xffffffff81fdf3bc
4,890,225632345,c;Code:
4,891,225632380,+;24
4,892,225632398,+;08
4,893,225632415,+;e8
4,894,225632432,+;28
4,895,225632448,+;fd
4,896,225632465,+;ff
4,897,225632481,+;ff
4,898,225632497,+;48
4,899,225632514,+;83
4,900,225632531,+;c4
4,901,225632547,+;50
4,902,225632563,+;5b
4,903,225632580,+;5d
4,904,225632596,+;41
4,905,225632613,+;5c
4,906,225632629,+;41
4,907,225632646,+;5d
4,908,225632662,+;41
4,909,225632679,+;5e
4,910,225632696,+;41
4,911,225632712,+;5f
4,912,225632729,+;c3
4,913,225632745,+;41
4,914,225632762,+;8b
4,915,225632779,+;57
4,916,225632795,+;08
4,917,225632811,+;41
4,918,225632828,+;81
4,919,225632844,+;e6
4,920,225632860,+;ff
4,921,225632877,+;0f
4,922,225632893,+;00
4,923,225632909,+;00
4,924,225632926,+;4c
4,925,225632942,+;39
4,926,225632959,+;f2
4,927,225632975,+;48
4,928,225632992,+;89
4,929,225633008,+;d0
4,930,225633025,+;75
4,931,225633041,+;c7
4,932,225633058,+;eb
4,933,225633074,+;dc
4,934,225633102,+;<0f>
4,935,225633125,+;0b
4,936,225633143,+;66
4,937,225633159,+;90
4,938,225633176,+;48
4,939,225633192,+;89
4,940,225633209,+;f7
4,941,225635854,+;48
4,942,225635871,+;c7
4,943,225635888,+;c6
4,944,225635904,+;a0
4,945,225635921,+;d2
4,946,225635937,+;a5
4,947,225635953,+;81
4,948,225635969,+;e9
4,949,225635986,+;a1
4,950,225636002,+;5b
4,951,225636018,+;dc
4,952,225636035,+;ff
4,953,225636051,+;90
4,954,225636067,+;55
4,955,225636083,+;
1,956,225638877,c;RIP
4,957,225638913,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,958,225641793,-; RSP <ffffc90000003778>
4,959,225644725,-;---[ end trace 1a18a71bb8da6c91 ]---
0,960,225647705,-;Kernel panic - not syncing: Fatal exception in interrupt
0,961,225650695,-;Kernel Offset: disabled
0,962,225653585,c;Rebooting in 5 seconds..
7,963,230729637,-;ACPI MEMORY or I/O RESET_REG.
6,785,60116884,-;netconsole: network logging has already started
4,786,67889269,-;------------[ cut here ]------------
2,787,67889405,-;kernel BUG at crypto/scatterwalk.c:77!
4,788,67889492,-;invalid opcode: 0000 [#1] SMP
4,789,67889561,c;Modules linked in:
4,790,67889608,+; wireguard(O)
4,791,67889635,+; iwldvm
4,792,67889655,+; mac80211
4,793,67889680,+; snd_hda_codec_hdmi
4,794,67889711,+; snd_hda_codec_generic
4,795,67889745,+; i915
4,796,67889764,+; snd_hda_intel
4,797,67889790,+; snd_hda_codec
4,798,67889816,+; iwlwifi
4,799,67889838,+; snd_hwdep
4,800,67889860,+; snd_hda_core
4,801,67889886,+; cfg80211
4,802,67889909,+; thinkpad_acpi
4,803,67889935,+; snd_pcm
4,804,67889956,+; mei_me
4,805,67889976,+; nvram
4,806,67889996,+; snd_timer
4,807,67890019,+; mei
4,808,67890038,+; intel_gtt
4,809,67890061,+; input_leds
4,810,67890085,+; snd
4,811,67890102,+; led_class
4,812,67890126,+; rfkill
4,813,67890146,+;
4,814,67890168,-;CPU: 3 PID: 0 Comm: swapper/3 Tainted: G           O    4.8.11-hardened #1
4,815,67890265,-;Hardware name: LENOVO 4290AD6/4290AD6, BIOS 8DET72WW (1.42 ) 02/18/2016
4,816,67890361,-;task: ffff88021492b340 task.stack: ffffc90000d00000
4,817,67890439,c;RIP: 0010:[<ffffffff8146f7bc>]
4,818,67890503,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,819,67890571,-;RSP: 0018:ffffc9000001ba78  EFLAGS: 00010246
4,820,67890644,-;RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000024
4,821,67890733,-;RDX: 0000000000000410 RSI: ffffc9000001bd80 RDI: 000041000001bc4c
4,822,67890822,-;RBP: 0000000000000001 R08: 0000000000000001 R09: 000000000c9e2337
4,823,67890911,-;R10: 00000000020a664c R11: 000000003d211e5e R12: ffffea00084da9c0
4,824,67891000,-;R13: ffffc9000001bc4c R14: ffffc9000001bc4c R15: ffffc9000001bd80
4,825,67891091,-;FS:  0000000000000000(0000) GS:ffff88021e2c0000(0000) knlGS:0000000000000000
4,826,67891190,-;CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
4,827,67891265,-;CR2: 0000000000000000 CR3: 0000000001f6d000 CR4: 00000000000606f0
4,828,67893898,-;Stack:
4,829,67896514,c; 03e443250a233700
4,830,67896558,+; 0008299708c025c6
4,831,67896600,+; 0000000000000008
4,832,67896631,+; 0000000000000000
4,833,67896660,+;
4,834,67899326,c; ffffffffa05643a6
4,835,67899371,+; ffffc9000001bcc4
4,836,67899400,+; 0000000000000000
4,837,67899429,+; 0000000000000000
4,838,67899458,+;
4,839,67902115,c; 0000000000000000
4,840,67902159,+; 01300971b0afed96
4,841,67902188,+; ffffc9000001bc8c
4,842,67902217,+; ffffc9000001bd60
4,843,67902246,+;
4,844,67904910,-;Call Trace:
4,845,67907618,c; <IRQ>
4,846,67907667,-; [<ffffffffa05643a6>] ? curve25519_generate_public+0xbd6/0xc40 [wireguard]
4,847,67910528,-; [<ffffffffa0564d23>] ? chacha20poly1305_encrypt_sg+0x423/0x550 [wireguard]
4,848,67913340,-; [<ffffffff817dcd71>] ? get_target_pstate_use_performance+0x81/0xb0
4,849,67916175,-; [<ffffffffa0555e68>] ? packet_create_data+0x398/0x690 [wireguard]
4,850,67918997,-; [<ffffffffa0556e90>] ? packet_send_queue+0x220/0x670 [wireguard]
4,851,67921857,-; [<ffffffff811efa96>] ? ksize+0x16/0xe0
4,852,67924652,-; [<ffffffff81834756>] ? __alloc_skb+0x126/0x1c0
4,853,67927443,-; [<ffffffffa0556b0b>] ? packet_send_keepalive+0x10b/0x270 [wireguard]
4,854,67930258,-; [<ffffffffa0554df0>] ? peer_total_count+0x70/0x1f0 [wireguard]
4,855,67933068,-; [<ffffffffa0554e10>] ? peer_total_count+0x90/0x1f0 [wireguard]
4,856,67933075,-; [<ffffffff8113385b>] ? call_timer_fn+0x2b/0x110
4,857,67933079,-; [<ffffffff811340b8>] ? run_timer_softirq+0x208/0x490
4,858,67933082,-; [<ffffffff81144620>] ? tick_sched_do_timer+0x30/0x30
4,859,67933085,-; [<ffffffff81144653>] ? tick_sched_timer+0x33/0x60
4,860,67933090,-; [<ffffffff81135da8>] ? __hrtimer_run_queues+0xe8/0x260
4,861,67933095,-; [<ffffffff810dfdaa>] ? __do_softirq+0xea/0x280
4,862,67933099,-; [<ffffffff810e006c>] ? irq_exit+0x8c/0x90
4,863,67933105,-; [<ffffffff8108d099>] ? smp_apic_timer_interrupt+0x39/0x50
4,864,67933111,-; [<ffffffff81990bdb>] ? apic_timer_interrupt+0x8b/0x90
4,865,67933113,c; <EOI>
4,866,67933117,-; [<ffffffff817dea9e>] ? cpuidle_enter_state+0x13e/0x2c0
4,867,67933126,-; [<ffffffff8111a6fe>] ? cpu_startup_entry+0x25e/0x300
4,868,67933130,-; [<ffffffff8108b0cd>] ? start_secondary+0x1ad/0x280
4,869,67933133,c;Code:
4,870,67933135,+;24
4,871,67933137,+;08
4,872,67933137,+;e8
4,873,67933138,+;28
4,874,67933148,+;fd
4,875,67933149,+;ff
4,876,67933150,+;ff
4,877,67933150,+;48
4,878,67933151,+;83
4,879,67933152,+;c4
4,880,67933152,+;50
4,881,67933153,+;5b
4,882,67933154,+;5d
4,883,67933154,+;41
4,884,67933155,+;5c
4,885,67933156,+;41
4,886,67933156,+;5d
4,887,67933157,+;41
4,888,67933158,+;5e
4,889,67933159,+;41
4,890,67933159,+;5f
4,891,67933160,+;c3
4,892,67933161,+;41
4,893,67933161,+;8b
4,894,67933162,+;57
4,895,67933163,+;08
4,896,67933163,+;41
4,897,67933164,+;81
4,898,67933165,+;e6
4,899,67933165,+;ff
4,900,67933166,+;0f
4,901,67933167,+;00
4,902,67933168,+;00
4,903,67933168,+;4c
4,904,67933169,+;39
4,905,67933170,+;f2
4,906,67933170,+;48
4,907,67933171,+;89
4,908,67933172,+;d0
4,909,67933172,+;75
4,910,67933173,+;c7
4,911,67933174,+;eb
4,912,67933174,+;dc
4,913,67933175,+;<0f>
4,914,67933176,+;0b
4,915,67933177,+;66
4,916,67933178,+;90
4,917,67933178,+;48
4,918,67933179,+;89
4,919,67933180,+;f7
4,920,67933180,+;48
4,921,67933181,+;c7
4,922,67933182,+;c6
4,923,67933182,+;a0
4,924,67933183,+;d2
4,925,67933184,+;a5
4,926,67933184,+;81
4,927,67933185,+;e9
4,928,67933186,+;a1
4,929,67933187,+;5b
4,930,67933187,+;dc
4,931,67933188,+;ff
4,932,67933189,+;90
4,933,67933189,+;55
4,934,67933190,+;
1,935,67933191,c;RIP
4,936,67933195,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,937,67933197,-; RSP <ffffc9000001ba78>
4,938,67933209,-;---[ end trace c5eaf9990272a70d ]---
0,939,67933211,-;Kernel panic - not syncing: Fatal exception in interrupt
0,940,67935982,-;Kernel Offset: disabled
0,941,67994601,c;Rebooting in 5 seconds..
7,942,73072084,-;ACPI MEMORY or I/O RESET_REG.
6,786,44441080,-;netconsole: network logging has already started
4,787,71941817,-;------------[ cut here ]------------
2,788,71944567,-;kernel BUG at crypto/scatterwalk.c:77!
4,789,71947253,-;invalid opcode: 0000 [#1] SMP
4,790,71949915,c;Modules linked in:
4,791,71949961,+; wireguard(O)
4,792,71949990,+; iwldvm
4,793,71950011,+; mac80211
4,794,71950107,+; snd_hda_codec_hdmi
4,795,71950140,+; snd_hda_codec_generic
4,796,71950173,+; i915
4,797,71950192,+; iwlwifi
4,798,71950214,+; snd_hda_intel
4,799,71950241,+; snd_hda_codec
4,800,71950267,+; cfg80211
4,801,71950289,+; snd_hwdep
4,802,71950312,+; snd_hda_core
4,803,71953028,+; snd_pcm
4,804,71953049,+; thinkpad_acpi
4,805,71953076,+; mei_me
4,806,71953096,+; mei
4,807,71953116,+; nvram
4,808,71953203,+; input_leds
4,809,71953228,+; snd_timer
4,810,71953251,+; snd
4,811,71953268,+; intel_gtt
4,812,71953290,+; led_class
4,813,71953313,+; rfkill
4,814,71953333,+;
4,815,71956133,-;CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O    4.8.11-hardened #1
4,816,71959031,-;Hardware name: LENOVO 4290AD6/4290AD6, BIOS 8DET72WW (1.42 ) 02/18/2016
4,817,71961955,-;task: ffffffff81e05a00 task.stack: ffffffff81e00000
4,818,71964854,c;RIP: 0010:[<ffffffff8146f7bc>]
4,819,71964918,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,820,71967827,-;RSP: 0018:ffffc90000003a78  EFLAGS: 00010246
4,821,71970759,-;RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000024
4,822,71973750,-;RDX: 0000000000000410 RSI: ffffc90000003d80 RDI: 0000410000003c4c
4,823,71976765,-;RBP: 0000000000000001 R08: 0000000000000001 R09: 000000000634d5b8
4,824,71979734,-;R10: 00000000034dc6c5 R11: 000000004bb9c88a R12: ffffea0008481a40
4,825,71982658,-;R13: ffffc90000003c4c R14: ffffc90000003c4c R15: ffffc90000003d80
4,826,71985541,-;FS:  0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000
4,827,71988421,-;CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
4,828,71991347,-;CR2: 0000000000000000 CR3: 0000000001f67000 CR4: 00000000000606f0
4,829,71994175,-;Stack:
4,830,71996972,c; 1303818b08d5b805
4,831,71997016,+; 000d371b00509d76
4,832,71997046,+; 0000000000000008
4,833,71997075,+; 0000000000000000
4,834,71997104,+;
4,835,71999939,c; ffffffffa00e33a6
4,836,71999982,+; ffffc90000003cc4
4,837,72000012,+; 00ff880200000fff
4,838,72000041,+; ffffffff817dcd71
4,839,72000069,+;
4,840,72002948,c; ffffffff817ddffe
4,841,72002991,+; 0314275e06c0012f
4,842,72003020,+; ffffc90000003c8c
4,843,72003049,+; ffffc90000003d60
4,844,72003078,+;
4,845,72005989,-;Call Trace:
4,846,72009008,c; <IRQ>
4,847,72009056,-; [<ffffffffa00e33a6>] ? curve25519_generate_public+0xbd6/0xc40 [wireguard]
4,848,72012187,-; [<ffffffff817dcd71>] ? get_target_pstate_use_performance+0x81/0xb0
4,849,72015338,-; [<ffffffff817ddffe>] ? intel_pstate_update_util+0x15e/0x3a0
4,850,72018499,-; [<ffffffffa00e3d23>] ? chacha20poly1305_encrypt_sg+0x423/0x550 [wireguard]
4,851,72021670,-; [<ffffffff81110526>] ? enqueue_task_fair+0x56/0x960
4,852,72024830,-; [<ffffffff81109e3c>] ? select_task_rq_fair+0x77c/0x880
4,853,72027993,-; [<ffffffffa00d4e68>] ? packet_create_data+0x398/0x690 [wireguard]
4,854,72031174,-; [<ffffffffa00d5e90>] ? packet_send_queue+0x220/0x670 [wireguard]
4,855,72034353,-; [<ffffffff811efa96>] ? ksize+0x16/0xe0
4,856,72037501,-; [<ffffffff81834756>] ? __alloc_skb+0x126/0x1c0
4,857,72040628,-; [<ffffffffa00d5b0b>] ? packet_send_keepalive+0x10b/0x270 [wireguard]
4,858,72043770,-; [<ffffffffa00d3e20>] ? peer_total_count+0xa0/0x1f0 [wireguard]
4,859,72046883,-; [<ffffffffa00d3e36>] ? peer_total_count+0xb6/0x1f0 [wireguard]
4,860,72049923,-; [<ffffffff8113385b>] ? call_timer_fn+0x2b/0x110
4,861,72052918,-; [<ffffffff811340b8>] ? run_timer_softirq+0x208/0x490
4,862,72055868,-; [<ffffffff81144620>] ? tick_sched_do_timer+0x30/0x30
4,863,72058818,-; [<ffffffff81144653>] ? tick_sched_timer+0x33/0x60
4,864,72061765,-; [<ffffffff81135da8>] ? __hrtimer_run_queues+0xe8/0x260
4,865,72064721,-; [<ffffffff810dfdaa>] ? __do_softirq+0xea/0x280
4,866,72067690,-; [<ffffffff810e006c>] ? irq_exit+0x8c/0x90
4,867,72070659,-; [<ffffffff8108d099>] ? smp_apic_timer_interrupt+0x39/0x50
4,868,72073656,-; [<ffffffff81990bdb>] ? apic_timer_interrupt+0x8b/0x90
4,869,72076725,c; <EOI>
4,870,72076765,-; [<ffffffff817dea9e>] ? cpuidle_enter_state+0x13e/0x2c0
4,871,72079774,-; [<ffffffff8111a6fe>] ? cpu_startup_entry+0x25e/0x300
4,872,72082843,-; [<ffffffff81fdfee5>] ? 0xffffffff81fdfee5
4,873,72085888,-; [<ffffffff81fdf120>] ? 0xffffffff81fdf120
4,874,72088914,-; [<ffffffff81fdf3bc>] ? 0xffffffff81fdf3bc
4,875,72091913,c;Code:
4,876,72091948,+;24
4,877,72091967,+;08
4,878,72091984,+;e8
4,879,72092001,+;28
4,880,72092017,+;fd
4,881,72092034,+;ff
4,882,72092050,+;ff
4,883,72092067,+;48
4,884,72092083,+;83
4,885,72092100,+;c4
4,886,72092117,+;50
4,887,72092133,+;5b
4,888,72092149,+;5d
4,889,72092166,+;41
4,890,72092183,+;5c
4,891,72092199,+;41
4,892,72092216,+;5d
4,893,72092232,+;41
4,894,72092250,+;5e
4,895,72092266,+;41
4,896,72092283,+;5f
4,897,72092299,+;c3
4,898,72092315,+;41
4,899,72092332,+;8b
4,900,72092349,+;57
4,901,72092365,+;08
4,902,72092382,+;41
4,903,72092399,+;81
4,904,72092415,+;e6
4,905,72092432,+;ff
4,906,72092448,+;0f
4,907,72092465,+;00
4,908,72092481,+;00
4,909,72092497,+;4c
4,910,72092519,+;39
4,911,72092536,+;f2
4,912,72092552,+;48
4,913,72092568,+;89
4,914,72092585,+;d0
4,915,72092602,+;75
4,916,72092618,+;c7
4,917,72092634,+;eb
4,918,72092651,+;dc
4,919,72092668,+;<0f>
4,920,72092686,+;0b
4,921,72092703,+;66
4,922,72092720,+;90
4,923,72092736,+;48
4,924,72092754,+;89
4,925,72092771,+;f7
4,926,72095774,+;48
4,927,72095791,+;c7
4,928,72095808,+;c6
4,929,72095824,+;a0
4,930,72095841,+;d2
4,931,72095858,+;a5
4,932,72095879,+;81
4,933,72095896,+;e9
4,934,72095912,+;a1
4,935,72095929,+;5b
4,936,72095945,+;dc
4,937,72095962,+;ff
4,938,72095979,+;90
4,939,72095995,+;55
4,940,72096012,+;
1,941,72099070,c;RIP
4,942,72099107,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,943,72102200,-; RSP <ffffc90000003a78>
4,944,72105289,-;---[ end trace 3ae634eabc1488e9 ]---
0,945,72108767,-;Kernel panic - not syncing: Fatal exception in interrupt
0,946,72108809,-;Kernel Offset: disabled
0,947,72114844,c;Rebooting in 5 seconds..
7,948,77190819,-;ACPI MEMORY or I/O RESET_REG.

[-- Attachment #3: config-4.8.11-hardened --]
[-- Type: application/octet-stream, Size: 118713 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 4.8.11-hardened Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=27
CONFIG_ARCH_MMAP_RND_BITS_MAX=27
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="gentoo"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
CONFIG_CC_STACKPROTECTOR_REGULAR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=27
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
CONFIG_MODULE_COMPRESS_XZ=y
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=24
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=1
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MOVABLE_NODE is not set
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
# CONFIG_X86_PMEM_LEGACY is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_LEGACY_VSYSCALL_EMULATE is not set
CONFIG_LEGACY_VSYSCALL_NONE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_DEFAULT_MODIFY_LDT_SYSCALL is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
# CONFIG_ACPI_APEI_PCIEAER is not set
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_EXTLOG=y
CONFIG_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=m
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI host controller drivers
#
# CONFIG_PCIE_DW_PLAT is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
# CONFIG_VMD is not set
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
CONFIG_DEFAULT_WESTWOOD=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="westwood"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_FOU=y
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IPV6_PIMSM_V2 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=y
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
# CONFIG_NF_NAT_TFTP is not set
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
# CONFIG_NFT_EXTHDR is not set
CONFIG_NFT_META=y
CONFIG_NFT_CT=y
CONFIG_NFT_RBTREE=y
CONFIG_NFT_HASH=y
CONFIG_NFT_COUNTER=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
CONFIG_NFT_NAT=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
# CONFIG_NFT_COMPAT is not set
# CONFIG_NF_DUP_NETDEV is not set
# CONFIG_NFT_DUP_NETDEV is not set
# CONFIG_NFT_FWD_NETDEV is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
# CONFIG_NETFILTER_XT_CONNMARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_NAT is not set
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
# CONFIG_NFT_DUP_IPV4 is not set
CONFIG_NF_TABLES_ARP=y
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_IPV4=y
CONFIG_NFT_CHAIN_NAT_IPV4=y
CONFIG_NF_NAT_MASQUERADE_IPV4=y
CONFIG_NFT_MASQ_IPV4=y
CONFIG_NFT_REDIR_IPV4=y
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
# CONFIG_IP_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_CHAIN_ROUTE_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
# CONFIG_NFT_DUP_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=y
# CONFIG_NF_LOG_IPV6 is not set
CONFIG_NF_NAT_IPV6=y
CONFIG_NFT_CHAIN_NAT_IPV6=y
CONFIG_NF_NAT_MASQUERADE_IPV6=y
CONFIG_NFT_MASQ_IPV6=y
CONFIG_NFT_REDIR_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_FILTER is not set
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP6_NF_NAT is not set
# CONFIG_NF_TABLES_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
CONFIG_NET_EMATCH_META=y
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=m
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=m
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_MQ_DEFAULT=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_MQ_DEFAULT=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_IPVLAN=y
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_ALX=y
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_CADENCE is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_AX88179_178A is not set
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_WOW is not set
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
# CONFIG_ATH9K_HTC is not set
CONFIG_ATH9K_HWRNG=y
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
# CONFIG_ATH10K_TRACING is not set
# CONFIG_WCN36XX is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
CONFIG_IWLWIFI_BCAST_FILTERING=y
CONFIG_IWLWIFI_PCIE_RTPM=y

#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
# CONFIG_WLAN_VENDOR_REALTEK is not set
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_I5500=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_SYSFS=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
CONFIG_ITCO_WDT=y
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RTSX_USB=m
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
# CONFIG_TTPCI_EEPROM is not set
CONFIG_DVB_MAX_ADAPTERS=4
CONFIG_DVB_DYNAMIC_MINORS=y

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
# CONFIG_VIDEO_AU0828 is not set

#
# Digital TV USB devices
#
# CONFIG_DVB_USB_V2 is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_USB_DRV is not set
# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
# CONFIG_VIDEO_ZORAN is not set

#
# Media capture/analog TV support
#
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_VIDEO_SAA7134 is not set
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
# CONFIG_DVB_PLUTO2 is not set
# CONFIG_DVB_PT1 is not set
# CONFIG_DVB_PT3 is not set
# CONFIG_DVB_NGENE is not set
# CONFIG_DVB_DDBRIDGE is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Audio/Video compression chips
#

#
# Miscellaneous helper chips
#

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m

#
# Multistandard (satellite) frontends
#

#
# Multistandard (cable + terrestrial) frontends
#

#
# DVB-S (satellite) frontends
#

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_TDA10048=m
# CONFIG_DVB_AS102_FE is not set

#
# DVB-C (cable) frontends
#

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#

#
# Digital terrestrial only tuners/PLL
#

#
# SEC control devices for DVB-S
#

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=m
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=2048
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m
# CONFIG_USBIP_DEBUG is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_SIMPLE=m
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_UCSI is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=y
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
# CONFIG_LEDS_CLASS_FLASH is not set

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_GHES=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I7CORE=y
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO=y
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PCI_VGA=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
CONFIG_INTEL_PMC_CORE=y
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
CONFIG_INTEL_RST=m
CONFIG_INTEL_SMARTCONNECT=m
# CONFIG_PVPANIC is not set
CONFIG_INTEL_PMC_IPC=m
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_SUNXI_CCU is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
# CONFIG_DEV_DAX is not set
# CONFIG_NVMEM is not set
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_CAPSULE_LOADER is not set
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_ZLIB_COMPRESS is not set
# CONFIG_PSTORE_LZO_COMPRESS is not set
CONFIG_PSTORE_LZ4_COMPRESS=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0xb6
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=5
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#

#
# Grsecurity
#
CONFIG_PAX_PER_CPU_PGD=y
CONFIG_TASK_SIZE_MAX_SHIFT=42
CONFIG_GRKERNSEC=y
# CONFIG_GRKERNSEC_CONFIG_AUTO is not set
CONFIG_GRKERNSEC_CONFIG_CUSTOM=y

#
# Customize Configuration
#

#
# PaX
#
CONFIG_PAX=y

#
# PaX Control
#
CONFIG_PAX_SOFTMODE=y
# CONFIG_PAX_PT_PAX_FLAGS is not set
CONFIG_PAX_XATTR_PAX_FLAGS=y
CONFIG_PAX_NO_ACL_FLAGS=y
# CONFIG_PAX_HAVE_ACL_FLAGS is not set
# CONFIG_PAX_HOOK_ACL_FLAGS is not set

#
# Non-executable pages
#
CONFIG_PAX_NOEXEC=y
CONFIG_PAX_PAGEEXEC=y
CONFIG_PAX_EMUTRAMP=y
CONFIG_PAX_MPROTECT=y
# CONFIG_PAX_MPROTECT_COMPAT is not set
# CONFIG_PAX_ELFRELOCS is not set
# CONFIG_PAX_KERNEXEC is not set

#
# Address Space Layout Randomization
#
CONFIG_PAX_ASLR=y
CONFIG_PAX_RANDKSTACK=y
CONFIG_PAX_RANDUSTACK=y
CONFIG_PAX_RANDMMAP=y

#
# Miscellaneous hardening features
#
# CONFIG_PAX_MEMORY_SANITIZE is not set
# CONFIG_PAX_MEMORY_STACKLEAK is not set
CONFIG_PAX_MEMORY_STRUCTLEAK=y
CONFIG_PAX_MEMORY_UDEREF=y
# CONFIG_PAX_REFCOUNT is not set
CONFIG_PAX_USERCOPY=y
# CONFIG_PAX_USERCOPY_DEBUG is not set
# CONFIG_PAX_SIZE_OVERFLOW is not set
# CONFIG_PAX_INITIFY is not set
CONFIG_HAVE_PAX_INITIFY_INIT_EXIT=y
# CONFIG_PAX_LATENT_ENTROPY is not set
# CONFIG_PAX_RAP is not set

#
# Memory Protections
#
# CONFIG_GRKERNSEC_KMEM is not set
CONFIG_GRKERNSEC_IO=y
# CONFIG_GRKERNSEC_BPF_HARDEN is not set
CONFIG_GRKERNSEC_PERF_HARDEN=y
CONFIG_GRKERNSEC_RAND_THREADSTACK=y
CONFIG_GRKERNSEC_PROC_MEMMAP=y
CONFIG_GRKERNSEC_KSTACKOVERFLOW=y
# CONFIG_GRKERNSEC_BRUTE is not set
CONFIG_GRKERNSEC_MODHARDEN=y
CONFIG_GRKERNSEC_HIDESYM=y
# CONFIG_GRKERNSEC_RANDSTRUCT is not set
# CONFIG_GRKERNSEC_KERN_LOCKOUT is not set

#
# Role Based Access Control Options
#
CONFIG_GRKERNSEC_NO_RBAC=y
CONFIG_GRKERNSEC_ACL_HIDEKERN=y
CONFIG_GRKERNSEC_ACL_MAXTRIES=3
CONFIG_GRKERNSEC_ACL_TIMEOUT=30

#
# Filesystem Protections
#
# CONFIG_GRKERNSEC_PROC is not set
# CONFIG_GRKERNSEC_LINK is not set
# CONFIG_GRKERNSEC_SYMLINKOWN is not set
CONFIG_GRKERNSEC_FIFO=y
# CONFIG_GRKERNSEC_SYSFS_RESTRICT is not set
# CONFIG_GRKERNSEC_ROFS is not set
CONFIG_GRKERNSEC_DEVICE_SIDECHANNEL=y
CONFIG_GRKERNSEC_CHROOT=y
# CONFIG_GRKERNSEC_CHROOT_MOUNT is not set
# CONFIG_GRKERNSEC_CHROOT_DOUBLE is not set
# CONFIG_GRKERNSEC_CHROOT_PIVOT is not set
CONFIG_GRKERNSEC_CHROOT_CHDIR=y
# CONFIG_GRKERNSEC_CHROOT_CHMOD is not set
CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
# CONFIG_GRKERNSEC_CHROOT_MKNOD is not set
CONFIG_GRKERNSEC_CHROOT_SHMAT=y
CONFIG_GRKERNSEC_CHROOT_UNIX=y
CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
CONFIG_GRKERNSEC_CHROOT_NICE=y
CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
CONFIG_GRKERNSEC_CHROOT_RENAME=y
# CONFIG_GRKERNSEC_CHROOT_CAPS is not set
# CONFIG_GRKERNSEC_CHROOT_INITRD is not set

#
# Kernel Auditing
#
# CONFIG_GRKERNSEC_AUDIT_GROUP is not set
# CONFIG_GRKERNSEC_EXECLOG is not set
# CONFIG_GRKERNSEC_RESLOG is not set
# CONFIG_GRKERNSEC_CHROOT_EXECLOG is not set
# CONFIG_GRKERNSEC_AUDIT_PTRACE is not set
# CONFIG_GRKERNSEC_AUDIT_CHDIR is not set
# CONFIG_GRKERNSEC_AUDIT_MOUNT is not set
CONFIG_GRKERNSEC_SIGNAL=y
CONFIG_GRKERNSEC_FORKFAIL=y
CONFIG_GRKERNSEC_TIME=y
# CONFIG_GRKERNSEC_PROC_IPADDR is not set
CONFIG_GRKERNSEC_RWXMAP_LOG=y

#
# Executable Protections
#
CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_HARDEN_PTRACE=y
CONFIG_GRKERNSEC_PTRACE_READEXEC=y
CONFIG_GRKERNSEC_SETXID=y
CONFIG_GRKERNSEC_HARDEN_IPC=y
CONFIG_GRKERNSEC_HARDEN_TTY=y
# CONFIG_GRKERNSEC_TPE is not set

#
# Network Protections
#
CONFIG_GRKERNSEC_BLACKHOLE=y
CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
# CONFIG_GRKERNSEC_SOCKET is not set

#
# Physical Protections
#
# CONFIG_GRKERNSEC_DENYUSB is not set

#
# Sysctl Support
#
CONFIG_GRKERNSEC_SYSCTL=y
# CONFIG_GRKERNSEC_SYSCTL_DISTRO is not set
CONFIG_GRKERNSEC_SYSCTL_ON=y

#
# Logging Options
#
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=10
# CONFIG_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_INTEL_TXT is not set
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_POLY1305_X86_64=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CHACHA20_X86_64=y
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_HW is not set

#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_MMU_AUDIT is not set
# CONFIG_KVM_DEVICE_ASSIGNMENT is not set
CONFIG_VHOST_NET=y
CONFIG_VHOST=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y

Re: Kernel Panic

[Samuel Holland]

[-- Attachment #1: Type: text/plain, Size: 715 bytes --]

Hello,

(forgot the list, sorry for the duplicate)

On 12/06/2016 12:19 PM, Jason A. Donenfeld wrote:
> I noticed you're using "4.8.11-hardened". What kernel is this
> actually? Grsecurity?

Yes, this is the =sys-kernel/hardened-sources-4.8.11 from Gentoo.
Attached is my kernel configuration.

Some additional information: Both this snapshot (0.0.20161129) and the
previous one work fine with =sys-kernel/hardened-sources-4.7.10
(effectively the same kernel config), so I have downgraded to that as a
workaround.

I didn't get netconsole set up until after about the third or fourth
panic. The top line from the earlier backtraces was
curve25519_generate_public for all of them I believe.

> Jason

Thanks,
Samuel

[-- Attachment #2: config-4.8.11-hardened --]
[-- Type: text/plain, Size: 118713 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 4.8.11-hardened Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=27
CONFIG_ARCH_MMAP_RND_BITS_MAX=27
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="gentoo"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
CONFIG_CC_STACKPROTECTOR_REGULAR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=27
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
CONFIG_MODULE_COMPRESS_XZ=y
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=24
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=1
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MOVABLE_NODE is not set
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
# CONFIG_X86_PMEM_LEGACY is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_LEGACY_VSYSCALL_EMULATE is not set
CONFIG_LEGACY_VSYSCALL_NONE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_DEFAULT_MODIFY_LDT_SYSCALL is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
# CONFIG_ACPI_APEI_PCIEAER is not set
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_EXTLOG=y
CONFIG_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=m
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI host controller drivers
#
# CONFIG_PCIE_DW_PLAT is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
# CONFIG_VMD is not set
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
CONFIG_DEFAULT_WESTWOOD=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="westwood"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_FOU=y
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IPV6_PIMSM_V2 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=y
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
# CONFIG_NF_NAT_TFTP is not set
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
# CONFIG_NFT_EXTHDR is not set
CONFIG_NFT_META=y
CONFIG_NFT_CT=y
CONFIG_NFT_RBTREE=y
CONFIG_NFT_HASH=y
CONFIG_NFT_COUNTER=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
CONFIG_NFT_NAT=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
# CONFIG_NFT_COMPAT is not set
# CONFIG_NF_DUP_NETDEV is not set
# CONFIG_NFT_DUP_NETDEV is not set
# CONFIG_NFT_FWD_NETDEV is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
# CONFIG_NETFILTER_XT_CONNMARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_NAT is not set
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
# CONFIG_NFT_DUP_IPV4 is not set
CONFIG_NF_TABLES_ARP=y
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_IPV4=y
CONFIG_NFT_CHAIN_NAT_IPV4=y
CONFIG_NF_NAT_MASQUERADE_IPV4=y
CONFIG_NFT_MASQ_IPV4=y
CONFIG_NFT_REDIR_IPV4=y
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
# CONFIG_IP_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_CHAIN_ROUTE_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
# CONFIG_NFT_DUP_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=y
# CONFIG_NF_LOG_IPV6 is not set
CONFIG_NF_NAT_IPV6=y
CONFIG_NFT_CHAIN_NAT_IPV6=y
CONFIG_NF_NAT_MASQUERADE_IPV6=y
CONFIG_NFT_MASQ_IPV6=y
CONFIG_NFT_REDIR_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_FILTER is not set
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP6_NF_NAT is not set
# CONFIG_NF_TABLES_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
CONFIG_NET_EMATCH_META=y
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=m
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=m
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_MQ_DEFAULT=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_MQ_DEFAULT=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_IPVLAN=y
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_ALX=y
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_CADENCE is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_AX88179_178A is not set
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_WOW is not set
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
# CONFIG_ATH9K_HTC is not set
CONFIG_ATH9K_HWRNG=y
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
# CONFIG_ATH10K_TRACING is not set
# CONFIG_WCN36XX is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
CONFIG_IWLWIFI_BCAST_FILTERING=y
CONFIG_IWLWIFI_PCIE_RTPM=y

#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
# CONFIG_WLAN_VENDOR_REALTEK is not set
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_I5500=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_SYSFS=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
CONFIG_ITCO_WDT=y
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RTSX_USB=m
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
# CONFIG_TTPCI_EEPROM is not set
CONFIG_DVB_MAX_ADAPTERS=4
CONFIG_DVB_DYNAMIC_MINORS=y

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
# CONFIG_VIDEO_AU0828 is not set

#
# Digital TV USB devices
#
# CONFIG_DVB_USB_V2 is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_USB_DRV is not set
# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
# CONFIG_VIDEO_ZORAN is not set

#
# Media capture/analog TV support
#
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_VIDEO_SAA7134 is not set
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
# CONFIG_DVB_PLUTO2 is not set
# CONFIG_DVB_PT1 is not set
# CONFIG_DVB_PT3 is not set
# CONFIG_DVB_NGENE is not set
# CONFIG_DVB_DDBRIDGE is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Audio/Video compression chips
#

#
# Miscellaneous helper chips
#

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m

#
# Multistandard (satellite) frontends
#

#
# Multistandard (cable + terrestrial) frontends
#

#
# DVB-S (satellite) frontends
#

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_TDA10048=m
# CONFIG_DVB_AS102_FE is not set

#
# DVB-C (cable) frontends
#

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#

#
# Digital terrestrial only tuners/PLL
#

#
# SEC control devices for DVB-S
#

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=m
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=2048
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m
# CONFIG_USBIP_DEBUG is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_SIMPLE=m
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_UCSI is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=y
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
# CONFIG_LEDS_CLASS_FLASH is not set

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_GHES=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I7CORE=y
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO=y
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PCI_VGA=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
CONFIG_INTEL_PMC_CORE=y
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
CONFIG_INTEL_RST=m
CONFIG_INTEL_SMARTCONNECT=m
# CONFIG_PVPANIC is not set
CONFIG_INTEL_PMC_IPC=m
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_SUNXI_CCU is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
# CONFIG_DEV_DAX is not set
# CONFIG_NVMEM is not set
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_CAPSULE_LOADER is not set
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_ZLIB_COMPRESS is not set
# CONFIG_PSTORE_LZO_COMPRESS is not set
CONFIG_PSTORE_LZ4_COMPRESS=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0xb6
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=5
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#

#
# Grsecurity
#
CONFIG_PAX_PER_CPU_PGD=y
CONFIG_TASK_SIZE_MAX_SHIFT=42
CONFIG_GRKERNSEC=y
# CONFIG_GRKERNSEC_CONFIG_AUTO is not set
CONFIG_GRKERNSEC_CONFIG_CUSTOM=y

#
# Customize Configuration
#

#
# PaX
#
CONFIG_PAX=y

#
# PaX Control
#
CONFIG_PAX_SOFTMODE=y
# CONFIG_PAX_PT_PAX_FLAGS is not set
CONFIG_PAX_XATTR_PAX_FLAGS=y
CONFIG_PAX_NO_ACL_FLAGS=y
# CONFIG_PAX_HAVE_ACL_FLAGS is not set
# CONFIG_PAX_HOOK_ACL_FLAGS is not set

#
# Non-executable pages
#
CONFIG_PAX_NOEXEC=y
CONFIG_PAX_PAGEEXEC=y
CONFIG_PAX_EMUTRAMP=y
CONFIG_PAX_MPROTECT=y
# CONFIG_PAX_MPROTECT_COMPAT is not set
# CONFIG_PAX_ELFRELOCS is not set
# CONFIG_PAX_KERNEXEC is not set

#
# Address Space Layout Randomization
#
CONFIG_PAX_ASLR=y
CONFIG_PAX_RANDKSTACK=y
CONFIG_PAX_RANDUSTACK=y
CONFIG_PAX_RANDMMAP=y

#
# Miscellaneous hardening features
#
# CONFIG_PAX_MEMORY_SANITIZE is not set
# CONFIG_PAX_MEMORY_STACKLEAK is not set
CONFIG_PAX_MEMORY_STRUCTLEAK=y
CONFIG_PAX_MEMORY_UDEREF=y
# CONFIG_PAX_REFCOUNT is not set
CONFIG_PAX_USERCOPY=y
# CONFIG_PAX_USERCOPY_DEBUG is not set
# CONFIG_PAX_SIZE_OVERFLOW is not set
# CONFIG_PAX_INITIFY is not set
CONFIG_HAVE_PAX_INITIFY_INIT_EXIT=y
# CONFIG_PAX_LATENT_ENTROPY is not set
# CONFIG_PAX_RAP is not set

#
# Memory Protections
#
# CONFIG_GRKERNSEC_KMEM is not set
CONFIG_GRKERNSEC_IO=y
# CONFIG_GRKERNSEC_BPF_HARDEN is not set
CONFIG_GRKERNSEC_PERF_HARDEN=y
CONFIG_GRKERNSEC_RAND_THREADSTACK=y
CONFIG_GRKERNSEC_PROC_MEMMAP=y
CONFIG_GRKERNSEC_KSTACKOVERFLOW=y
# CONFIG_GRKERNSEC_BRUTE is not set
CONFIG_GRKERNSEC_MODHARDEN=y
CONFIG_GRKERNSEC_HIDESYM=y
# CONFIG_GRKERNSEC_RANDSTRUCT is not set
# CONFIG_GRKERNSEC_KERN_LOCKOUT is not set

#
# Role Based Access Control Options
#
CONFIG_GRKERNSEC_NO_RBAC=y
CONFIG_GRKERNSEC_ACL_HIDEKERN=y
CONFIG_GRKERNSEC_ACL_MAXTRIES=3
CONFIG_GRKERNSEC_ACL_TIMEOUT=30

#
# Filesystem Protections
#
# CONFIG_GRKERNSEC_PROC is not set
# CONFIG_GRKERNSEC_LINK is not set
# CONFIG_GRKERNSEC_SYMLINKOWN is not set
CONFIG_GRKERNSEC_FIFO=y
# CONFIG_GRKERNSEC_SYSFS_RESTRICT is not set
# CONFIG_GRKERNSEC_ROFS is not set
CONFIG_GRKERNSEC_DEVICE_SIDECHANNEL=y
CONFIG_GRKERNSEC_CHROOT=y
# CONFIG_GRKERNSEC_CHROOT_MOUNT is not set
# CONFIG_GRKERNSEC_CHROOT_DOUBLE is not set
# CONFIG_GRKERNSEC_CHROOT_PIVOT is not set
CONFIG_GRKERNSEC_CHROOT_CHDIR=y
# CONFIG_GRKERNSEC_CHROOT_CHMOD is not set
CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
# CONFIG_GRKERNSEC_CHROOT_MKNOD is not set
CONFIG_GRKERNSEC_CHROOT_SHMAT=y
CONFIG_GRKERNSEC_CHROOT_UNIX=y
CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
CONFIG_GRKERNSEC_CHROOT_NICE=y
CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
CONFIG_GRKERNSEC_CHROOT_RENAME=y
# CONFIG_GRKERNSEC_CHROOT_CAPS is not set
# CONFIG_GRKERNSEC_CHROOT_INITRD is not set

#
# Kernel Auditing
#
# CONFIG_GRKERNSEC_AUDIT_GROUP is not set
# CONFIG_GRKERNSEC_EXECLOG is not set
# CONFIG_GRKERNSEC_RESLOG is not set
# CONFIG_GRKERNSEC_CHROOT_EXECLOG is not set
# CONFIG_GRKERNSEC_AUDIT_PTRACE is not set
# CONFIG_GRKERNSEC_AUDIT_CHDIR is not set
# CONFIG_GRKERNSEC_AUDIT_MOUNT is not set
CONFIG_GRKERNSEC_SIGNAL=y
CONFIG_GRKERNSEC_FORKFAIL=y
CONFIG_GRKERNSEC_TIME=y
# CONFIG_GRKERNSEC_PROC_IPADDR is not set
CONFIG_GRKERNSEC_RWXMAP_LOG=y

#
# Executable Protections
#
CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_HARDEN_PTRACE=y
CONFIG_GRKERNSEC_PTRACE_READEXEC=y
CONFIG_GRKERNSEC_SETXID=y
CONFIG_GRKERNSEC_HARDEN_IPC=y
CONFIG_GRKERNSEC_HARDEN_TTY=y
# CONFIG_GRKERNSEC_TPE is not set

#
# Network Protections
#
CONFIG_GRKERNSEC_BLACKHOLE=y
CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
# CONFIG_GRKERNSEC_SOCKET is not set

#
# Physical Protections
#
# CONFIG_GRKERNSEC_DENYUSB is not set

#
# Sysctl Support
#
CONFIG_GRKERNSEC_SYSCTL=y
# CONFIG_GRKERNSEC_SYSCTL_DISTRO is not set
CONFIG_GRKERNSEC_SYSCTL_ON=y

#
# Logging Options
#
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=10
# CONFIG_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_INTEL_TXT is not set
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_POLY1305_X86_64=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CHACHA20_X86_64=y
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_HW is not set

#
# Certificates for signature checking
#
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_MMU_AUDIT is not set
# CONFIG_KVM_DEVICE_ASSIGNMENT is not set
CONFIG_VHOST_NET=y
CONFIG_VHOST=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y

Re: Kernel Panic

[Jason A. Donenfeld]

Hi Samuel,

Thanks for the stack trace. I'll try to triage this.

I noticed you're using "4.8.11-hardened". What kernel is this
actually? Grsecurity?

Jason

Kernel Panic

[Samuel Holland]

[-- Attachment #1: Type: text/plain, Size: 518 bytes --]

Hello,

I'm getting a reproducable kernel panic with WireGuard snapshot 20161129
and Gentoo's hardened-sources 4.8.11 about one minute after boot
(persistent keepalive is set to 25 seconds). Netconsole output is
attached from three consecutive panics. For the first, since I have the
interface start on boot, I had to rmmod wireguard to enable netconsole,
and modprobe it again to prompt the panic. For the second two I was able
to repeat my commands fast enough to catch the panic happen on its own.

Regards,
Samuel

[-- Attachment #2: bug.dmesg --]
[-- Type: text/plain, Size: 19338 bytes --]

6,785,188154370,-;netconsole: network logging has already started
6,786,197345837,-;wireguard: WireGuard experimental-0.0.20161129 loaded. See www.wireguard.io for information.
6,787,197345997,-;wireguard: Copyright (C) 2015-2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
4,795,225469782,-;------------[ cut here ]------------
2,796,225472396,-;kernel BUG at crypto/scatterwalk.c:77!
4,797,225474985,-;invalid opcode: 0000 [#1] SMP
4,798,225477551,c;Modules linked in:
4,799,225477595,+; wireguard(O)
4,800,225477622,+; iwldvm
4,801,225477643,+; mac80211
4,802,225477739,+; snd_hda_codec_hdmi
4,803,225477771,+; snd_hda_codec_generic
4,804,225477804,+; i915
4,805,225477822,+; snd_hda_intel
4,806,225477849,+; snd_hda_codec
4,807,225477874,+; iwlwifi
4,808,225477898,+; snd_hwdep
4,809,225477921,+; snd_hda_core
4,810,225477947,+; cfg80211
4,811,225480566,+; thinkpad_acpi
4,812,225480593,+; snd_pcm
4,813,225480615,+; nvram
4,814,225480634,+; rfkill
4,815,225480654,+; snd_timer
4,816,225480744,+; input_leds
4,817,225480769,+; mei_me
4,818,225480789,+; led_class
4,819,225480812,+; snd
4,820,225480831,+; mei
4,821,225480850,+; intel_gtt
4,822,225480874,+; [last unloaded: wireguard]
4,823,225480911,+;
4,824,225483628,-;CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O    4.8.11-hardened #1
4,825,225486483,-;Hardware name: LENOVO 4290AD6/4290AD6, BIOS 8DET72WW (1.42 ) 02/18/2016
4,826,225489355,-;task: ffffffff81e05a00 task.stack: ffffffff81e00000
4,827,225492211,c;RIP: 0010:[<ffffffff8146f7bc>]
4,828,225492275,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,829,225495162,-;RSP: 0018:ffffc90000003778  EFLAGS: 00010246
4,830,225498051,-;RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000024
4,831,225500939,-;RDX: 0000000000000410 RSI: 0000000000000000 RDI: 000041000000394c
4,832,225503811,-;RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
4,833,225506683,-;R10: ffffc90000003788 R11: 000000002e3bfb2e R12: ffffea0008430780
4,834,225509566,-;R13: ffffc9000000394c R14: ffffc9000000394c R15: ffffc90000003788
4,835,225512461,-;FS:  0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000
4,836,225515343,-;CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
4,837,225518254,-;CR2: 0000002c963d72d0 CR3: 0000000001f67000 CR4: 00000000000606f0
4,838,225521123,-;Stack:
4,839,225523978,c; 0a3fc2490e75ef00
4,840,225524023,+; 001745e901e0860b
4,841,225524053,+; ffffea0008430782
4,842,225524082,+; 00000010000000c0
4,843,225524111,+;
4,844,225526973,c; 0000000000000000
4,845,225527016,+; 0000000000000000
4,846,225527045,+; 0000000000000002
4,847,225527074,+; 0000000000000000
4,848,225527102,+;
4,849,225529985,c; 0000000000000000
4,850,225530028,+; 0000000000000000
4,851,225530057,+; ffffc9000000398c
4,852,225530087,+; ffffc90000003a50
4,853,225530114,+;
4,854,225532937,-;Call Trace:
4,855,225535766,c; <IRQ>
4,856,225535814,-; [<ffffffffa0577d23>] ? chacha20poly1305_encrypt_sg+0x423/0x550 [wireguard]
4,857,225538747,-; [<ffffffffa01bdfc4>] ? iwl_trans_pcie_tx+0xd64/0x12d0 [iwlwifi]
4,858,225541716,-; [<ffffffffa0568e68>] ? packet_create_data+0x398/0x690 [wireguard]
4,859,225544705,-; [<ffffffffa0569e90>] ? packet_send_queue+0x220/0x670 [wireguard]
4,860,225547694,-; [<ffffffff814e6fe6>] ? __list_add+0x16/0x40
4,861,225550640,-; [<ffffffffa0569d23>] ? packet_send_queue+0xb3/0x670 [wireguard]
4,862,225553559,-; [<ffffffffa05674f7>] ? noise_handshake_begin_session+0xce7/0xf90 [wireguard]
4,863,225556518,-; [<ffffffff81848f92>] ? dev_hard_start_xmit+0x92/0x1e0
4,864,225559482,-; [<ffffffff818496a2>] ? __dev_queue_xmit+0x4f2/0x5b0
4,865,225562444,-; [<ffffffff819213ce>] ? ip6_finish_output2+0x17e/0x470
4,866,225565413,-; [<ffffffff8195cd76>] ? ipv6_confirm+0x56/0x110
4,867,225568372,-; [<ffffffff8188a9c4>] ? nf_iterate+0x54/0x70
4,868,225571314,-; [<ffffffff81923bda>] ? ip6_output+0x3a/0xf0
4,869,225574248,-; [<ffffffff81923ab0>] ? ip6_fragment+0x980/0x980
4,870,225577203,-; [<ffffffff8193990a>] ? NF_HOOK_THRESH.constprop.22+0x2a/0xa0
4,871,225580158,-; [<ffffffff819393e0>] ? compat_ipv6_setsockopt+0xb0/0xb0
4,872,225583106,-; [<ffffffff81939b0e>] ? ndisc_send_skb+0x18e/0x2d0
4,873,225586071,-; [<ffffffff8192b314>] ? addrconf_rs_timer+0x104/0x150
4,874,225589061,-; [<ffffffff8192b210>] ? ipv6_get_lladdr+0xb0/0xb0
4,875,225592053,-; [<ffffffff8113385b>] ? call_timer_fn+0x2b/0x110
4,876,225595031,-; [<ffffffff811340b8>] ? run_timer_softirq+0x208/0x490
4,877,225598024,-; [<ffffffff81144620>] ? tick_sched_do_timer+0x30/0x30
4,878,225601022,-; [<ffffffff81144653>] ? tick_sched_timer+0x33/0x60
4,879,225604104,-; [<ffffffff81135da8>] ? __hrtimer_run_queues+0xe8/0x260
4,880,225607105,-; [<ffffffff810dfdaa>] ? __do_softirq+0xea/0x280
4,881,225610075,-; [<ffffffff810e006c>] ? irq_exit+0x8c/0x90
4,882,225613018,-; [<ffffffff8108d099>] ? smp_apic_timer_interrupt+0x39/0x50
4,883,225615985,-; [<ffffffff81990bdb>] ? apic_timer_interrupt+0x8b/0x90
4,884,225618849,c; <EOI>
4,885,225618889,-; [<ffffffff817dea9e>] ? cpuidle_enter_state+0x13e/0x2c0
4,886,225621677,-; [<ffffffff8111a6fe>] ? cpu_startup_entry+0x25e/0x300
4,887,225624420,-; [<ffffffff81fdfee5>] ? 0xffffffff81fdfee5
4,888,225627115,-; [<ffffffff81fdf120>] ? 0xffffffff81fdf120
4,889,225629761,-; [<ffffffff81fdf3bc>] ? 0xffffffff81fdf3bc
4,890,225632345,c;Code:
4,891,225632380,+;24
4,892,225632398,+;08
4,893,225632415,+;e8
4,894,225632432,+;28
4,895,225632448,+;fd
4,896,225632465,+;ff
4,897,225632481,+;ff
4,898,225632497,+;48
4,899,225632514,+;83
4,900,225632531,+;c4
4,901,225632547,+;50
4,902,225632563,+;5b
4,903,225632580,+;5d
4,904,225632596,+;41
4,905,225632613,+;5c
4,906,225632629,+;41
4,907,225632646,+;5d
4,908,225632662,+;41
4,909,225632679,+;5e
4,910,225632696,+;41
4,911,225632712,+;5f
4,912,225632729,+;c3
4,913,225632745,+;41
4,914,225632762,+;8b
4,915,225632779,+;57
4,916,225632795,+;08
4,917,225632811,+;41
4,918,225632828,+;81
4,919,225632844,+;e6
4,920,225632860,+;ff
4,921,225632877,+;0f
4,922,225632893,+;00
4,923,225632909,+;00
4,924,225632926,+;4c
4,925,225632942,+;39
4,926,225632959,+;f2
4,927,225632975,+;48
4,928,225632992,+;89
4,929,225633008,+;d0
4,930,225633025,+;75
4,931,225633041,+;c7
4,932,225633058,+;eb
4,933,225633074,+;dc
4,934,225633102,+;<0f>
4,935,225633125,+;0b
4,936,225633143,+;66
4,937,225633159,+;90
4,938,225633176,+;48
4,939,225633192,+;89
4,940,225633209,+;f7
4,941,225635854,+;48
4,942,225635871,+;c7
4,943,225635888,+;c6
4,944,225635904,+;a0
4,945,225635921,+;d2
4,946,225635937,+;a5
4,947,225635953,+;81
4,948,225635969,+;e9
4,949,225635986,+;a1
4,950,225636002,+;5b
4,951,225636018,+;dc
4,952,225636035,+;ff
4,953,225636051,+;90
4,954,225636067,+;55
4,955,225636083,+;
1,956,225638877,c;RIP
4,957,225638913,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,958,225641793,-; RSP <ffffc90000003778>
4,959,225644725,-;---[ end trace 1a18a71bb8da6c91 ]---
0,960,225647705,-;Kernel panic - not syncing: Fatal exception in interrupt
0,961,225650695,-;Kernel Offset: disabled
0,962,225653585,c;Rebooting in 5 seconds..
7,963,230729637,-;ACPI MEMORY or I/O RESET_REG.
6,785,60116884,-;netconsole: network logging has already started
4,786,67889269,-;------------[ cut here ]------------
2,787,67889405,-;kernel BUG at crypto/scatterwalk.c:77!
4,788,67889492,-;invalid opcode: 0000 [#1] SMP
4,789,67889561,c;Modules linked in:
4,790,67889608,+; wireguard(O)
4,791,67889635,+; iwldvm
4,792,67889655,+; mac80211
4,793,67889680,+; snd_hda_codec_hdmi
4,794,67889711,+; snd_hda_codec_generic
4,795,67889745,+; i915
4,796,67889764,+; snd_hda_intel
4,797,67889790,+; snd_hda_codec
4,798,67889816,+; iwlwifi
4,799,67889838,+; snd_hwdep
4,800,67889860,+; snd_hda_core
4,801,67889886,+; cfg80211
4,802,67889909,+; thinkpad_acpi
4,803,67889935,+; snd_pcm
4,804,67889956,+; mei_me
4,805,67889976,+; nvram
4,806,67889996,+; snd_timer
4,807,67890019,+; mei
4,808,67890038,+; intel_gtt
4,809,67890061,+; input_leds
4,810,67890085,+; snd
4,811,67890102,+; led_class
4,812,67890126,+; rfkill
4,813,67890146,+;
4,814,67890168,-;CPU: 3 PID: 0 Comm: swapper/3 Tainted: G           O    4.8.11-hardened #1
4,815,67890265,-;Hardware name: LENOVO 4290AD6/4290AD6, BIOS 8DET72WW (1.42 ) 02/18/2016
4,816,67890361,-;task: ffff88021492b340 task.stack: ffffc90000d00000
4,817,67890439,c;RIP: 0010:[<ffffffff8146f7bc>]
4,818,67890503,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,819,67890571,-;RSP: 0018:ffffc9000001ba78  EFLAGS: 00010246
4,820,67890644,-;RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000024
4,821,67890733,-;RDX: 0000000000000410 RSI: ffffc9000001bd80 RDI: 000041000001bc4c
4,822,67890822,-;RBP: 0000000000000001 R08: 0000000000000001 R09: 000000000c9e2337
4,823,67890911,-;R10: 00000000020a664c R11: 000000003d211e5e R12: ffffea00084da9c0
4,824,67891000,-;R13: ffffc9000001bc4c R14: ffffc9000001bc4c R15: ffffc9000001bd80
4,825,67891091,-;FS:  0000000000000000(0000) GS:ffff88021e2c0000(0000) knlGS:0000000000000000
4,826,67891190,-;CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
4,827,67891265,-;CR2: 0000000000000000 CR3: 0000000001f6d000 CR4: 00000000000606f0
4,828,67893898,-;Stack:
4,829,67896514,c; 03e443250a233700
4,830,67896558,+; 0008299708c025c6
4,831,67896600,+; 0000000000000008
4,832,67896631,+; 0000000000000000
4,833,67896660,+;
4,834,67899326,c; ffffffffa05643a6
4,835,67899371,+; ffffc9000001bcc4
4,836,67899400,+; 0000000000000000
4,837,67899429,+; 0000000000000000
4,838,67899458,+;
4,839,67902115,c; 0000000000000000
4,840,67902159,+; 01300971b0afed96
4,841,67902188,+; ffffc9000001bc8c
4,842,67902217,+; ffffc9000001bd60
4,843,67902246,+;
4,844,67904910,-;Call Trace:
4,845,67907618,c; <IRQ>
4,846,67907667,-; [<ffffffffa05643a6>] ? curve25519_generate_public+0xbd6/0xc40 [wireguard]
4,847,67910528,-; [<ffffffffa0564d23>] ? chacha20poly1305_encrypt_sg+0x423/0x550 [wireguard]
4,848,67913340,-; [<ffffffff817dcd71>] ? get_target_pstate_use_performance+0x81/0xb0
4,849,67916175,-; [<ffffffffa0555e68>] ? packet_create_data+0x398/0x690 [wireguard]
4,850,67918997,-; [<ffffffffa0556e90>] ? packet_send_queue+0x220/0x670 [wireguard]
4,851,67921857,-; [<ffffffff811efa96>] ? ksize+0x16/0xe0
4,852,67924652,-; [<ffffffff81834756>] ? __alloc_skb+0x126/0x1c0
4,853,67927443,-; [<ffffffffa0556b0b>] ? packet_send_keepalive+0x10b/0x270 [wireguard]
4,854,67930258,-; [<ffffffffa0554df0>] ? peer_total_count+0x70/0x1f0 [wireguard]
4,855,67933068,-; [<ffffffffa0554e10>] ? peer_total_count+0x90/0x1f0 [wireguard]
4,856,67933075,-; [<ffffffff8113385b>] ? call_timer_fn+0x2b/0x110
4,857,67933079,-; [<ffffffff811340b8>] ? run_timer_softirq+0x208/0x490
4,858,67933082,-; [<ffffffff81144620>] ? tick_sched_do_timer+0x30/0x30
4,859,67933085,-; [<ffffffff81144653>] ? tick_sched_timer+0x33/0x60
4,860,67933090,-; [<ffffffff81135da8>] ? __hrtimer_run_queues+0xe8/0x260
4,861,67933095,-; [<ffffffff810dfdaa>] ? __do_softirq+0xea/0x280
4,862,67933099,-; [<ffffffff810e006c>] ? irq_exit+0x8c/0x90
4,863,67933105,-; [<ffffffff8108d099>] ? smp_apic_timer_interrupt+0x39/0x50
4,864,67933111,-; [<ffffffff81990bdb>] ? apic_timer_interrupt+0x8b/0x90
4,865,67933113,c; <EOI>
4,866,67933117,-; [<ffffffff817dea9e>] ? cpuidle_enter_state+0x13e/0x2c0
4,867,67933126,-; [<ffffffff8111a6fe>] ? cpu_startup_entry+0x25e/0x300
4,868,67933130,-; [<ffffffff8108b0cd>] ? start_secondary+0x1ad/0x280
4,869,67933133,c;Code:
4,870,67933135,+;24
4,871,67933137,+;08
4,872,67933137,+;e8
4,873,67933138,+;28
4,874,67933148,+;fd
4,875,67933149,+;ff
4,876,67933150,+;ff
4,877,67933150,+;48
4,878,67933151,+;83
4,879,67933152,+;c4
4,880,67933152,+;50
4,881,67933153,+;5b
4,882,67933154,+;5d
4,883,67933154,+;41
4,884,67933155,+;5c
4,885,67933156,+;41
4,886,67933156,+;5d
4,887,67933157,+;41
4,888,67933158,+;5e
4,889,67933159,+;41
4,890,67933159,+;5f
4,891,67933160,+;c3
4,892,67933161,+;41
4,893,67933161,+;8b
4,894,67933162,+;57
4,895,67933163,+;08
4,896,67933163,+;41
4,897,67933164,+;81
4,898,67933165,+;e6
4,899,67933165,+;ff
4,900,67933166,+;0f
4,901,67933167,+;00
4,902,67933168,+;00
4,903,67933168,+;4c
4,904,67933169,+;39
4,905,67933170,+;f2
4,906,67933170,+;48
4,907,67933171,+;89
4,908,67933172,+;d0
4,909,67933172,+;75
4,910,67933173,+;c7
4,911,67933174,+;eb
4,912,67933174,+;dc
4,913,67933175,+;<0f>
4,914,67933176,+;0b
4,915,67933177,+;66
4,916,67933178,+;90
4,917,67933178,+;48
4,918,67933179,+;89
4,919,67933180,+;f7
4,920,67933180,+;48
4,921,67933181,+;c7
4,922,67933182,+;c6
4,923,67933182,+;a0
4,924,67933183,+;d2
4,925,67933184,+;a5
4,926,67933184,+;81
4,927,67933185,+;e9
4,928,67933186,+;a1
4,929,67933187,+;5b
4,930,67933187,+;dc
4,931,67933188,+;ff
4,932,67933189,+;90
4,933,67933189,+;55
4,934,67933190,+;
1,935,67933191,c;RIP
4,936,67933195,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,937,67933197,-; RSP <ffffc9000001ba78>
4,938,67933209,-;---[ end trace c5eaf9990272a70d ]---
0,939,67933211,-;Kernel panic - not syncing: Fatal exception in interrupt
0,940,67935982,-;Kernel Offset: disabled
0,941,67994601,c;Rebooting in 5 seconds..
7,942,73072084,-;ACPI MEMORY or I/O RESET_REG.
6,786,44441080,-;netconsole: network logging has already started
4,787,71941817,-;------------[ cut here ]------------
2,788,71944567,-;kernel BUG at crypto/scatterwalk.c:77!
4,789,71947253,-;invalid opcode: 0000 [#1] SMP
4,790,71949915,c;Modules linked in:
4,791,71949961,+; wireguard(O)
4,792,71949990,+; iwldvm
4,793,71950011,+; mac80211
4,794,71950107,+; snd_hda_codec_hdmi
4,795,71950140,+; snd_hda_codec_generic
4,796,71950173,+; i915
4,797,71950192,+; iwlwifi
4,798,71950214,+; snd_hda_intel
4,799,71950241,+; snd_hda_codec
4,800,71950267,+; cfg80211
4,801,71950289,+; snd_hwdep
4,802,71950312,+; snd_hda_core
4,803,71953028,+; snd_pcm
4,804,71953049,+; thinkpad_acpi
4,805,71953076,+; mei_me
4,806,71953096,+; mei
4,807,71953116,+; nvram
4,808,71953203,+; input_leds
4,809,71953228,+; snd_timer
4,810,71953251,+; snd
4,811,71953268,+; intel_gtt
4,812,71953290,+; led_class
4,813,71953313,+; rfkill
4,814,71953333,+;
4,815,71956133,-;CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O    4.8.11-hardened #1
4,816,71959031,-;Hardware name: LENOVO 4290AD6/4290AD6, BIOS 8DET72WW (1.42 ) 02/18/2016
4,817,71961955,-;task: ffffffff81e05a00 task.stack: ffffffff81e00000
4,818,71964854,c;RIP: 0010:[<ffffffff8146f7bc>]
4,819,71964918,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,820,71967827,-;RSP: 0018:ffffc90000003a78  EFLAGS: 00010246
4,821,71970759,-;RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000024
4,822,71973750,-;RDX: 0000000000000410 RSI: ffffc90000003d80 RDI: 0000410000003c4c
4,823,71976765,-;RBP: 0000000000000001 R08: 0000000000000001 R09: 000000000634d5b8
4,824,71979734,-;R10: 00000000034dc6c5 R11: 000000004bb9c88a R12: ffffea0008481a40
4,825,71982658,-;R13: ffffc90000003c4c R14: ffffc90000003c4c R15: ffffc90000003d80
4,826,71985541,-;FS:  0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000
4,827,71988421,-;CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
4,828,71991347,-;CR2: 0000000000000000 CR3: 0000000001f67000 CR4: 00000000000606f0
4,829,71994175,-;Stack:
4,830,71996972,c; 1303818b08d5b805
4,831,71997016,+; 000d371b00509d76
4,832,71997046,+; 0000000000000008
4,833,71997075,+; 0000000000000000
4,834,71997104,+;
4,835,71999939,c; ffffffffa00e33a6
4,836,71999982,+; ffffc90000003cc4
4,837,72000012,+; 00ff880200000fff
4,838,72000041,+; ffffffff817dcd71
4,839,72000069,+;
4,840,72002948,c; ffffffff817ddffe
4,841,72002991,+; 0314275e06c0012f
4,842,72003020,+; ffffc90000003c8c
4,843,72003049,+; ffffc90000003d60
4,844,72003078,+;
4,845,72005989,-;Call Trace:
4,846,72009008,c; <IRQ>
4,847,72009056,-; [<ffffffffa00e33a6>] ? curve25519_generate_public+0xbd6/0xc40 [wireguard]
4,848,72012187,-; [<ffffffff817dcd71>] ? get_target_pstate_use_performance+0x81/0xb0
4,849,72015338,-; [<ffffffff817ddffe>] ? intel_pstate_update_util+0x15e/0x3a0
4,850,72018499,-; [<ffffffffa00e3d23>] ? chacha20poly1305_encrypt_sg+0x423/0x550 [wireguard]
4,851,72021670,-; [<ffffffff81110526>] ? enqueue_task_fair+0x56/0x960
4,852,72024830,-; [<ffffffff81109e3c>] ? select_task_rq_fair+0x77c/0x880
4,853,72027993,-; [<ffffffffa00d4e68>] ? packet_create_data+0x398/0x690 [wireguard]
4,854,72031174,-; [<ffffffffa00d5e90>] ? packet_send_queue+0x220/0x670 [wireguard]
4,855,72034353,-; [<ffffffff811efa96>] ? ksize+0x16/0xe0
4,856,72037501,-; [<ffffffff81834756>] ? __alloc_skb+0x126/0x1c0
4,857,72040628,-; [<ffffffffa00d5b0b>] ? packet_send_keepalive+0x10b/0x270 [wireguard]
4,858,72043770,-; [<ffffffffa00d3e20>] ? peer_total_count+0xa0/0x1f0 [wireguard]
4,859,72046883,-; [<ffffffffa00d3e36>] ? peer_total_count+0xb6/0x1f0 [wireguard]
4,860,72049923,-; [<ffffffff8113385b>] ? call_timer_fn+0x2b/0x110
4,861,72052918,-; [<ffffffff811340b8>] ? run_timer_softirq+0x208/0x490
4,862,72055868,-; [<ffffffff81144620>] ? tick_sched_do_timer+0x30/0x30
4,863,72058818,-; [<ffffffff81144653>] ? tick_sched_timer+0x33/0x60
4,864,72061765,-; [<ffffffff81135da8>] ? __hrtimer_run_queues+0xe8/0x260
4,865,72064721,-; [<ffffffff810dfdaa>] ? __do_softirq+0xea/0x280
4,866,72067690,-; [<ffffffff810e006c>] ? irq_exit+0x8c/0x90
4,867,72070659,-; [<ffffffff8108d099>] ? smp_apic_timer_interrupt+0x39/0x50
4,868,72073656,-; [<ffffffff81990bdb>] ? apic_timer_interrupt+0x8b/0x90
4,869,72076725,c; <EOI>
4,870,72076765,-; [<ffffffff817dea9e>] ? cpuidle_enter_state+0x13e/0x2c0
4,871,72079774,-; [<ffffffff8111a6fe>] ? cpu_startup_entry+0x25e/0x300
4,872,72082843,-; [<ffffffff81fdfee5>] ? 0xffffffff81fdfee5
4,873,72085888,-; [<ffffffff81fdf120>] ? 0xffffffff81fdf120
4,874,72088914,-; [<ffffffff81fdf3bc>] ? 0xffffffff81fdf3bc
4,875,72091913,c;Code:
4,876,72091948,+;24
4,877,72091967,+;08
4,878,72091984,+;e8
4,879,72092001,+;28
4,880,72092017,+;fd
4,881,72092034,+;ff
4,882,72092050,+;ff
4,883,72092067,+;48
4,884,72092083,+;83
4,885,72092100,+;c4
4,886,72092117,+;50
4,887,72092133,+;5b
4,888,72092149,+;5d
4,889,72092166,+;41
4,890,72092183,+;5c
4,891,72092199,+;41
4,892,72092216,+;5d
4,893,72092232,+;41
4,894,72092250,+;5e
4,895,72092266,+;41
4,896,72092283,+;5f
4,897,72092299,+;c3
4,898,72092315,+;41
4,899,72092332,+;8b
4,900,72092349,+;57
4,901,72092365,+;08
4,902,72092382,+;41
4,903,72092399,+;81
4,904,72092415,+;e6
4,905,72092432,+;ff
4,906,72092448,+;0f
4,907,72092465,+;00
4,908,72092481,+;00
4,909,72092497,+;4c
4,910,72092519,+;39
4,911,72092536,+;f2
4,912,72092552,+;48
4,913,72092568,+;89
4,914,72092585,+;d0
4,915,72092602,+;75
4,916,72092618,+;c7
4,917,72092634,+;eb
4,918,72092651,+;dc
4,919,72092668,+;<0f>
4,920,72092686,+;0b
4,921,72092703,+;66
4,922,72092720,+;90
4,923,72092736,+;48
4,924,72092754,+;89
4,925,72092771,+;f7
4,926,72095774,+;48
4,927,72095791,+;c7
4,928,72095808,+;c6
4,929,72095824,+;a0
4,930,72095841,+;d2
4,931,72095858,+;a5
4,932,72095879,+;81
4,933,72095896,+;e9
4,934,72095912,+;a1
4,935,72095929,+;5b
4,936,72095945,+;dc
4,937,72095962,+;ff
4,938,72095979,+;90
4,939,72095995,+;55
4,940,72096012,+;
1,941,72099070,c;RIP
4,942,72099107,+; [<ffffffff8146f7bc>] scatterwalk_map_and_copy+0xdc/0xe0
4,943,72102200,-; RSP <ffffc90000003a78>
4,944,72105289,-;---[ end trace 3ae634eabc1488e9 ]---
0,945,72108767,-;Kernel panic - not syncing: Fatal exception in interrupt
0,946,72108809,-;Kernel Offset: disabled
0,947,72114844,c;Rebooting in 5 seconds..
7,948,77190819,-;ACPI MEMORY or I/O RESET_REG.

kernel panic

[Mulyadi Santosa]

On Thu, Oct 15, 2015 at 6:23 PM, jinzhao at wingtech.com <jinzhao@wingtech.com>
wrote:

> Dear all:
>      I met a problem as below, what the function of walk_page_range??
> Exception Class: Kernel (KE)
> PC is at [<ffffffc00017fc90>] walk_page_range+0x3c/0x314
>
> Current Executing Process:
> [Binder_C, 3611][main, 354]
>
> Backtrace:
> [<ffffffc0009f21dc>] __do_kernel_fault.part.5+0x70/0x84
> [<ffffffc0000942f4>] do_bad_area+0x90/0x94
> [<ffffffc000094340>] do_translation_fault+0x30/0x4c
> [<ffffffc0000813fc>] do_mem_abort+0x38/0x98
> [<ffffffc000083c58>] el1_da+0x1c/0x88
> [<ffffffc0001eb3e0>] show_smap+0x88/0x284
> [<ffffffc0001eb5e8>] show_pid_smap+0xc/0x18
> [<ffffffc0001aefb8>] seq_read+0x1a4/0x40c
> [<ffffffc00018e75c>] vfs_read+0x88/0x170
> [<ffffffc00018ebf0>] SyS_read+0x40/0x8c
> [<ffffffc000084308>] cpu_switch_to+0x48/0x4c
> [<ffffffffffffffff>] 0xffffffffffffffff
>
>
> Thanks!
> ------------------------------
> jinzhao at wingtech.cn
>
>
AFAIK, that's the function to get PTE of the related pages, then get the
virtual address of them.

Maybe the caller hit invalid PTE ?

-- 
regards,

Mulyadi Santosa
Freelance Linux trainer and consultant

blog: the-hydra.blogspot.com
training: mulyaditraining.blogspot.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20151016/0ef8f374/attachment.html 

kernel panic

[jinzhao at wingtech.com]

Dear all:
     I met a problem as below, what the function of walk_page_range??
Exception Class: Kernel (KE) 
PC is at [<ffffffc00017fc90>] walk_page_range+0x3c/0x314 

Current Executing Process: 
[Binder_C, 3611][main, 354] 

Backtrace: 
[<ffffffc0009f21dc>] __do_kernel_fault.part.5+0x70/0x84 
[<ffffffc0000942f4>] do_bad_area+0x90/0x94 
[<ffffffc000094340>] do_translation_fault+0x30/0x4c 
[<ffffffc0000813fc>] do_mem_abort+0x38/0x98 
[<ffffffc000083c58>] el1_da+0x1c/0x88 
[<ffffffc0001eb3e0>] show_smap+0x88/0x284 
[<ffffffc0001eb5e8>] show_pid_smap+0xc/0x18 
[<ffffffc0001aefb8>] seq_read+0x1a4/0x40c 
[<ffffffc00018e75c>] vfs_read+0x88/0x170 
[<ffffffc00018ebf0>] SyS_read+0x40/0x8c 
[<ffffffc000084308>] cpu_switch_to+0x48/0x4c 
[<ffffffffffffffff>] 0xffffffffffffffff


Thanks!


jinzhao at wingtech.cn
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20151015/440e76ee/attachment.html 

Re: kernel panic

[Brian Jackson]

On Monday, September 16, 2013 9:57:26 PM CDT, zhang xintao wrote:
> 2.6.32-279.el6.x86_64 #1 SMP Thu Sep 12 12:59:17 CST 2013 x86_64
> x86_64 x86_64 GNU/Linux


You should probably report this to your distribution.


> =====================================================
> PID: 2621   TASK: ffff881fe10d2aa0  CPU: 14  COMMAND: "qemu-kvm"
>  #0 [ffff880028307b00] machine_kexec at ffffffff8103281b
>  #1 [ffff880028307b60] crash_kexec at ffffffff810ba322
>  #2 [ffff880028307c30] panic at ffffffff814fce74
>  #3 [ffff880028307cb0] watchdog_overflow_callback at ffffffff810daf7d
>  #4 [ffff880028307cd0] __perf_event_overflow at ffffffff8110dbbd
>  #5 [ffff880028307d70] perf_event_overflow at ffffffff8110e174
>  #6 [ffff880028307d80] intel_pmu_handle_irq at ffffffff8101e976
>  #7 [ffff880028307e90] perf_event_nmi_handler at ffffffff81501519
>  #8 [ffff880028307ea0] notifier_call_chain at ffffffff81503065
>  #9 [ffff880028307ee0] atomic_notifier_call_chain at ffffffff815030ca
> #10 [ffff880028307ef0] notify_die at ffffffff81097d6e
> #11 [ffff880028307f20] do_nmi at ffffffff81500ce3
> #12 [ffff880028307f50] nmi at ffffffff815005f0
>     [exception RIP: _spin_lock+33]
>     RIP: ffffffff814ffe61  RSP: ffff8800283033d0  RFLAGS: 00000097
>     RAX: 0000000000008dbb  RBX: 0000000000016680  RCX: 00000000000000c1
>     RDX: 0000000000008db4  RSI: ffff880028303438  RDI: ffff880028336680
>     RBP: ffff8800283033d0   R8: 00000000000000c1   R9: 0000000000000005
>     R10: 0000000000000000  R11: 0000000000000001  R12: ffff880bf2fd0080
>     R13: ffff880028303438  R14: ffff880028336680  R15: 0000000000000001
>     ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
> --- <NMI exception stack> ---
> #13 [ffff8800283033d0] _spin_lock at ffffffff814ffe61
> #14 [ffff8800283033d8] task_rq_lock at ffffffff8105350d
> #15 [ffff880028303408] try_to_wake_up at ffffffff8105bfbc
> #16 [ffff880028303478] default_wake_function at ffffffff8105c372
> #17 [ffff880028303488] pollwake at ffffffff8118fbd6
> #18 [ffff8800283034c8] __wake_up_common at ffffffff8104e189
> #19 [ffff880028303518] __wake_up at ffffffff81053268
> #20 [ffff880028303558] tun_net_xmit at ffffffffa0156495 [tun]
> #21 [ffff880028303588] dev_hard_start_xmit at ffffffff8143ad9c
> #22 [ffff8800283035e8] sch_direct_xmit at ffffffff814588ea
> #23 [ffff880028303638] __qdisc_run at ffffffff814589bb
> #24 [ffff880028303668] dev_queue_xmit at ffffffff8143f4c3
> #25 [ffff8800283036b8] br_dev_queue_push_xmit at ffffffffa03796bc 
[bridge]
> #26 [ffff8800283036d8] br_nf_dev_queue_xmit at ffffffffa037f378 [bridge]
> #27 [ffff8800283036e8] br_nf_post_routing at ffffffffa037fe10 [bridge]
> #28 [ffff880028303738] nf_iterate at ffffffff814662b9
> #29 [ffff880028303788] nf_hook_slow at ffffffff81466474
> #30 [ffff880028303808] br_forward_finish at ffffffffa0379733 [bridge]
> #31 [ffff880028303838] br_nf_forward_finish at ffffffffa037f9b8 [bridge]
> #32 [ffff880028303878] br_nf_forward_ip at ffffffffa0380ea8 [bridge]
> #33 [ffff8800283038d8] nf_iterate at ffffffff814662b9
> #34 [ffff880028303928] nf_hook_slow at ffffffff81466474
> #35 [ffff8800283039a8] __br_forward at ffffffffa03797c2 [bridge]
> #36 [ffff8800283039d8] deliver_clone at ffffffffa037939e [bridge]
> #37 [ffff880028303a08] br_flood at ffffffffa03795b9 [bridge]
> #38 [ffff880028303a48] br_flood_forward at ffffffffa0379625 [bridge]
> #39 [ffff880028303a58] br_handle_frame_finish at ffffffffa037a7ae 
[bridge]
> #40 [ffff880028303aa8] br_nf_pre_routing_finish at ffffffffa0380318 
[bridge]
> #41 [ffff880028303b48] br_nf_pre_routing at ffffffffa038088f [bridge]
> #42 [ffff880028303b98] nf_iterate at ffffffff814662b9
> #43 [ffff880028303be8] nf_hook_slow at ffffffff81466474
> #44 [ffff880028303c68] br_handle_frame at ffffffffa037a95c [bridge]
> #45 [ffff880028303ca8] __netif_receive_skb at ffffffff8143a509
> #46 [ffff880028303d08] netif_receive_skb at ffffffff8143c708
> #47 [ffff880028303d48] napi_skb_finish at ffffffff8143c810
> #48 [ffff880028303d68] napi_gro_receive at ffffffff8143ed49
> #49 [ffff880028303d88] ixgbe_receive_skb at ffffffffa00df9df [ixgbe]
> #50 [ffff880028303d98] ixgbe_poll at ffffffffa00e0dda [ixgbe]
> #51 [ffff880028303e68] net_rx_action at ffffffff8143ee63
> #52 [ffff880028303ec8] __do_softirq at ffffffff81073b81
> #53 [ffff880028303f38] call_softirq at ffffffff8100c24c
> #54 [ffff880028303f50] do_softirq at ffffffff8100de85
> #55 [ffff880028303f70] irq_exit at ffffffff81073965
> #56 [ffff880028303f80] do_IRQ at ffffffff81505835
> --- <IRQ stack> ---
> #57 [ffff881e47ce3a48] ret_from_intr at ffffffff8100ba53
>     [exception RIP: x86_emulate_insn+9030]
>     RIP: ffffffffa01c69f6  RSP: ffff881e47ce3af8  RFLAGS: 00000202
>     RAX: 0000000000000000  RBX: ffff881e47ce3b88  RCX: 0000000000000010
>     RDX: ffff881c26cbc5c0  RSI: 0000000000000003  RDI: ffff881c26cbc5c0
>     RBP: ffffffff8100ba4e   R8: 0000000000000001   R9: ffffffffa01b3bf0
>     R10: 0000000000000000  R11: 0000000000000000  R12: ffffffffa01ae2c6
>     R13: ffff881e47ce3a98  R14: 0000000000000000  R15: ffff881c26cbc5c0
>     ORIG_RAX: ffffffffffffff86  CS: 0010  SS: 0018
> #58 [ffff881e47ce3b90] x86_emulate_instruction at ffffffffa01b47ab [kvm]
> #59 [ffff881e47ce3bf0] kvm_mmu_page_fault at ffffffffa01be6d2 [kvm]
> #60 [ffff881e47ce3c30] handle_ept_violation at ffffffffa020548a 
[kvm_intel]
> #61 [ffff881e47ce3c70] vmx_handle_exit at ffffffffa0208cc7 [kvm_intel]
> #62 [ffff881e47ce3cb0] kvm_arch_vcpu_ioctl_run at ffffffffa01b724c [kvm]
> #63 [ffff881e47ce3db0] kvm_vcpu_ioctl at ffffffffa01a0322 [kvm]
> #64 [ffff881e47ce3e60] vfs_ioctl at ffffffff8118db82
> #65 [ffff881e47ce3ea0] do_vfs_ioctl at ffffffff8118e04a
> #66 [ffff881e47ce3f30] sys_ioctl at ffffffff8118e2a1
> #67 [ffff881e47ce3f80] system_call_fastpath at ffffffff8100b0f2
>     RIP: 00007faceea17a87  RSP: 00007faceab8ba90  RFLAGS: 00000206
>     RAX: 0000000000000010  RBX: ffffffff8100b0f2  RCX: 00007facf232e010
>     RDX: 0000000000000000  RSI: 000000000000ae80  RDI: 0000000000000010
>     RBP: 00007facf54b0e40   R8: 0000000020047000   R9: 00007facf2b3f420
>     R10: 0000000000000000  R11: 0000000000000246  R12: 00007facf2468000
>     R13: 00007facf54b0f30  R14: 0000000000000000  R15: 00007facf2467000
>     ORIG_RAX: 0000000000000010  CS: 0033  SS: 002b
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>

Kernel panic

[zhang xintao]

2.6.32-279.el6.x86_64 #1 SMP Thu Sep 12 12:59:17 CST 2013 x86_64
x86_64 x86_64 GNU/Linux
==========================
PID: 2621   TASK: ffff881fe10d2aa0  CPU: 14  COMMAND: "qemu-kvm"
 #0 [ffff880028307b00] machine_kexec at ffffffff8103281b
 #1 [ffff880028307b60] crash_kexec at ffffffff810ba322
 #2 [ffff880028307c30] panic at ffffffff814fce74
 #3 [ffff880028307cb0] watchdog_overflow_callback at ffffffff810daf7d
 #4 [ffff880028307cd0] __perf_event_overflow at ffffffff8110dbbd
 #5 [ffff880028307d70] perf_event_overflow at ffffffff8110e174
 #6 [ffff880028307d80] intel_pmu_handle_irq at ffffffff8101e976
 #7 [ffff880028307e90] perf_event_nmi_handler at ffffffff81501519
 #8 [ffff880028307ea0] notifier_call_chain at ffffffff81503065
 #9 [ffff880028307ee0] atomic_notifier_call_chain at ffffffff815030ca
#10 [ffff880028307ef0] notify_die at ffffffff81097d6e
#11 [ffff880028307f20] do_nmi at ffffffff81500ce3
#12 [ffff880028307f50] nmi at ffffffff815005f0
    [exception RIP: _spin_lock+33]
    RIP: ffffffff814ffe61  RSP: ffff8800283033d0  RFLAGS: 00000097
    RAX: 0000000000008dbb  RBX: 0000000000016680  RCX: 00000000000000c1
    RDX: 0000000000008db4  RSI: ffff880028303438  RDI: ffff880028336680
    RBP: ffff8800283033d0   R8: 00000000000000c1   R9: 0000000000000005
    R10: 0000000000000000  R11: 0000000000000001  R12: ffff880bf2fd0080
    R13: ffff880028303438  R14: ffff880028336680  R15: 0000000000000001
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
--- <NMI exception stack> ---
#13 [ffff8800283033d0] _spin_lock at ffffffff814ffe61
#14 [ffff8800283033d8] task_rq_lock at ffffffff8105350d
#15 [ffff880028303408] try_to_wake_up at ffffffff8105bfbc
#16 [ffff880028303478] default_wake_function at ffffffff8105c372
#17 [ffff880028303488] pollwake at ffffffff8118fbd6
#18 [ffff8800283034c8] __wake_up_common at ffffffff8104e189
#19 [ffff880028303518] __wake_up at ffffffff81053268
#20 [ffff880028303558] tun_net_xmit at ffffffffa0156495 [tun]
#21 [ffff880028303588] dev_hard_start_xmit at ffffffff8143ad9c
#22 [ffff8800283035e8] sch_direct_xmit at ffffffff814588ea
#23 [ffff880028303638] __qdisc_run at ffffffff814589bb
#24 [ffff880028303668] dev_queue_xmit at ffffffff8143f4c3
#25 [ffff8800283036b8] br_dev_queue_push_xmit at ffffffffa03796bc [bridge]
#26 [ffff8800283036d8] br_nf_dev_queue_xmit at ffffffffa037f378 [bridge]
#27 [ffff8800283036e8] br_nf_post_routing at ffffffffa037fe10 [bridge]
#28 [ffff880028303738] nf_iterate at ffffffff814662b9
#29 [ffff880028303788] nf_hook_slow at ffffffff81466474
#30 [ffff880028303808] br_forward_finish at ffffffffa0379733 [bridge]
#31 [ffff880028303838] br_nf_forward_finish at ffffffffa037f9b8 [bridge]
#32 [ffff880028303878] br_nf_forward_ip at ffffffffa0380ea8 [bridge]
#33 [ffff8800283038d8] nf_iterate at ffffffff814662b9
#34 [ffff880028303928] nf_hook_slow at ffffffff81466474
#35 [ffff8800283039a8] __br_forward at ffffffffa03797c2 [bridge]
#36 [ffff8800283039d8] deliver_clone at ffffffffa037939e [bridge]
#37 [ffff880028303a08] br_flood at ffffffffa03795b9 [bridge]
#38 [ffff880028303a48] br_flood_forward at ffffffffa0379625 [bridge]
#39 [ffff880028303a58] br_handle_frame_finish at ffffffffa037a7ae [bridge]
#40 [ffff880028303aa8] br_nf_pre_routing_finish at ffffffffa0380318 [bridge]
#41 [ffff880028303b48] br_nf_pre_routing at ffffffffa038088f [bridge]
#42 [ffff880028303b98] nf_iterate at ffffffff814662b9
#43 [ffff880028303be8] nf_hook_slow at ffffffff81466474
#44 [ffff880028303c68] br_handle_frame at ffffffffa037a95c [bridge]
#45 [ffff880028303ca8] __netif_receive_skb at ffffffff8143a509
#46 [ffff880028303d08] netif_receive_skb at ffffffff8143c708
#47 [ffff880028303d48] napi_skb_finish at ffffffff8143c810
#48 [ffff880028303d68] napi_gro_receive at ffffffff8143ed49
#49 [ffff880028303d88] ixgbe_receive_skb at ffffffffa00df9df [ixgbe]
#50 [ffff880028303d98] ixgbe_poll at ffffffffa00e0dda [ixgbe]
#51 [ffff880028303e68] net_rx_action at ffffffff8143ee63
#52 [ffff880028303ec8] __do_softirq at ffffffff81073b81
#53 [ffff880028303f38] call_softirq at ffffffff8100c24c
#54 [ffff880028303f50] do_softirq at ffffffff8100de85
#55 [ffff880028303f70] irq_exit at ffffffff81073965
#56 [ffff880028303f80] do_IRQ at ffffffff81505835
--- <IRQ stack> ---
#57 [ffff881e47ce3a48] ret_from_intr at ffffffff8100ba53
    [exception RIP: x86_emulate_insn+9030]
    RIP: ffffffffa01c69f6  RSP: ffff881e47ce3af8  RFLAGS: 00000202
    RAX: 0000000000000000  RBX: ffff881e47ce3b88  RCX: 0000000000000010
    RDX: ffff881c26cbc5c0  RSI: 0000000000000003  RDI: ffff881c26cbc5c0
    RBP: ffffffff8100ba4e   R8: 0000000000000001   R9: ffffffffa01b3bf0
    R10: 0000000000000000  R11: 0000000000000000  R12: ffffffffa01ae2c6
    R13: ffff881e47ce3a98  R14: 0000000000000000  R15: ffff881c26cbc5c0
    ORIG_RAX: ffffffffffffff86  CS: 0010  SS: 0018
#58 [ffff881e47ce3b90] x86_emulate_instruction at ffffffffa01b47ab [kvm]
#59 [ffff881e47ce3bf0] kvm_mmu_page_fault at ffffffffa01be6d2 [kvm]
#60 [ffff881e47ce3c30] handle_ept_violation at ffffffffa020548a [kvm_intel]
#61 [ffff881e47ce3c70] vmx_handle_exit at ffffffffa0208cc7 [kvm_intel]
#62 [ffff881e47ce3cb0] kvm_arch_vcpu_ioctl_run at ffffffffa01b724c [kvm]
#63 [ffff881e47ce3db0] kvm_vcpu_ioctl at ffffffffa01a0322 [kvm]
#64 [ffff881e47ce3e60] vfs_ioctl at ffffffff8118db82
#65 [ffff881e47ce3ea0] do_vfs_ioctl at ffffffff8118e04a
#66 [ffff881e47ce3f30] sys_ioctl at ffffffff8118e2a1
#67 [ffff881e47ce3f80] system_call_fastpath at ffffffff8100b0f2
    RIP: 00007faceea17a87  RSP: 00007faceab8ba90  RFLAGS: 00000206
    RAX: 0000000000000010  RBX: ffffffff8100b0f2  RCX: 00007facf232e010
    RDX: 0000000000000000  RSI: 000000000000ae80  RDI: 0000000000000010
    RBP: 00007facf54b0e40   R8: 0000000020047000   R9: 00007facf2b3f420
    R10: 0000000000000000  R11: 0000000000000246  R12: 00007facf2468000
    R13: 00007facf54b0f30  R14: 0000000000000000  R15: 00007facf2467000
    ORIG_RAX: 0000000000000010  CS: 0033  SS: 002b

kernel panic

[zhang xintao]

2.6.32-279.el6.x86_64 #1 SMP Thu Sep 12 12:59:17 CST 2013 x86_64
x86_64 x86_64 GNU/Linux
=====================================================
PID: 2621   TASK: ffff881fe10d2aa0  CPU: 14  COMMAND: "qemu-kvm"
 #0 [ffff880028307b00] machine_kexec at ffffffff8103281b
 #1 [ffff880028307b60] crash_kexec at ffffffff810ba322
 #2 [ffff880028307c30] panic at ffffffff814fce74
 #3 [ffff880028307cb0] watchdog_overflow_callback at ffffffff810daf7d
 #4 [ffff880028307cd0] __perf_event_overflow at ffffffff8110dbbd
 #5 [ffff880028307d70] perf_event_overflow at ffffffff8110e174
 #6 [ffff880028307d80] intel_pmu_handle_irq at ffffffff8101e976
 #7 [ffff880028307e90] perf_event_nmi_handler at ffffffff81501519
 #8 [ffff880028307ea0] notifier_call_chain at ffffffff81503065
 #9 [ffff880028307ee0] atomic_notifier_call_chain at ffffffff815030ca
#10 [ffff880028307ef0] notify_die at ffffffff81097d6e
#11 [ffff880028307f20] do_nmi at ffffffff81500ce3
#12 [ffff880028307f50] nmi at ffffffff815005f0
    [exception RIP: _spin_lock+33]
    RIP: ffffffff814ffe61  RSP: ffff8800283033d0  RFLAGS: 00000097
    RAX: 0000000000008dbb  RBX: 0000000000016680  RCX: 00000000000000c1
    RDX: 0000000000008db4  RSI: ffff880028303438  RDI: ffff880028336680
    RBP: ffff8800283033d0   R8: 00000000000000c1   R9: 0000000000000005
    R10: 0000000000000000  R11: 0000000000000001  R12: ffff880bf2fd0080
    R13: ffff880028303438  R14: ffff880028336680  R15: 0000000000000001
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
--- <NMI exception stack> ---
#13 [ffff8800283033d0] _spin_lock at ffffffff814ffe61
#14 [ffff8800283033d8] task_rq_lock at ffffffff8105350d
#15 [ffff880028303408] try_to_wake_up at ffffffff8105bfbc
#16 [ffff880028303478] default_wake_function at ffffffff8105c372
#17 [ffff880028303488] pollwake at ffffffff8118fbd6
#18 [ffff8800283034c8] __wake_up_common at ffffffff8104e189
#19 [ffff880028303518] __wake_up at ffffffff81053268
#20 [ffff880028303558] tun_net_xmit at ffffffffa0156495 [tun]
#21 [ffff880028303588] dev_hard_start_xmit at ffffffff8143ad9c
#22 [ffff8800283035e8] sch_direct_xmit at ffffffff814588ea
#23 [ffff880028303638] __qdisc_run at ffffffff814589bb
#24 [ffff880028303668] dev_queue_xmit at ffffffff8143f4c3
#25 [ffff8800283036b8] br_dev_queue_push_xmit at ffffffffa03796bc [bridge]
#26 [ffff8800283036d8] br_nf_dev_queue_xmit at ffffffffa037f378 [bridge]
#27 [ffff8800283036e8] br_nf_post_routing at ffffffffa037fe10 [bridge]
#28 [ffff880028303738] nf_iterate at ffffffff814662b9
#29 [ffff880028303788] nf_hook_slow at ffffffff81466474
#30 [ffff880028303808] br_forward_finish at ffffffffa0379733 [bridge]
#31 [ffff880028303838] br_nf_forward_finish at ffffffffa037f9b8 [bridge]
#32 [ffff880028303878] br_nf_forward_ip at ffffffffa0380ea8 [bridge]
#33 [ffff8800283038d8] nf_iterate at ffffffff814662b9
#34 [ffff880028303928] nf_hook_slow at ffffffff81466474
#35 [ffff8800283039a8] __br_forward at ffffffffa03797c2 [bridge]
#36 [ffff8800283039d8] deliver_clone at ffffffffa037939e [bridge]
#37 [ffff880028303a08] br_flood at ffffffffa03795b9 [bridge]
#38 [ffff880028303a48] br_flood_forward at ffffffffa0379625 [bridge]
#39 [ffff880028303a58] br_handle_frame_finish at ffffffffa037a7ae [bridge]
#40 [ffff880028303aa8] br_nf_pre_routing_finish at ffffffffa0380318 [bridge]
#41 [ffff880028303b48] br_nf_pre_routing at ffffffffa038088f [bridge]
#42 [ffff880028303b98] nf_iterate at ffffffff814662b9
#43 [ffff880028303be8] nf_hook_slow at ffffffff81466474
#44 [ffff880028303c68] br_handle_frame at ffffffffa037a95c [bridge]
#45 [ffff880028303ca8] __netif_receive_skb at ffffffff8143a509
#46 [ffff880028303d08] netif_receive_skb at ffffffff8143c708
#47 [ffff880028303d48] napi_skb_finish at ffffffff8143c810
#48 [ffff880028303d68] napi_gro_receive at ffffffff8143ed49
#49 [ffff880028303d88] ixgbe_receive_skb at ffffffffa00df9df [ixgbe]
#50 [ffff880028303d98] ixgbe_poll at ffffffffa00e0dda [ixgbe]
#51 [ffff880028303e68] net_rx_action at ffffffff8143ee63
#52 [ffff880028303ec8] __do_softirq at ffffffff81073b81
#53 [ffff880028303f38] call_softirq at ffffffff8100c24c
#54 [ffff880028303f50] do_softirq at ffffffff8100de85
#55 [ffff880028303f70] irq_exit at ffffffff81073965
#56 [ffff880028303f80] do_IRQ at ffffffff81505835
--- <IRQ stack> ---
#57 [ffff881e47ce3a48] ret_from_intr at ffffffff8100ba53
    [exception RIP: x86_emulate_insn+9030]
    RIP: ffffffffa01c69f6  RSP: ffff881e47ce3af8  RFLAGS: 00000202
    RAX: 0000000000000000  RBX: ffff881e47ce3b88  RCX: 0000000000000010
    RDX: ffff881c26cbc5c0  RSI: 0000000000000003  RDI: ffff881c26cbc5c0
    RBP: ffffffff8100ba4e   R8: 0000000000000001   R9: ffffffffa01b3bf0
    R10: 0000000000000000  R11: 0000000000000000  R12: ffffffffa01ae2c6
    R13: ffff881e47ce3a98  R14: 0000000000000000  R15: ffff881c26cbc5c0
    ORIG_RAX: ffffffffffffff86  CS: 0010  SS: 0018
#58 [ffff881e47ce3b90] x86_emulate_instruction at ffffffffa01b47ab [kvm]
#59 [ffff881e47ce3bf0] kvm_mmu_page_fault at ffffffffa01be6d2 [kvm]
#60 [ffff881e47ce3c30] handle_ept_violation at ffffffffa020548a [kvm_intel]
#61 [ffff881e47ce3c70] vmx_handle_exit at ffffffffa0208cc7 [kvm_intel]
#62 [ffff881e47ce3cb0] kvm_arch_vcpu_ioctl_run at ffffffffa01b724c [kvm]
#63 [ffff881e47ce3db0] kvm_vcpu_ioctl at ffffffffa01a0322 [kvm]
#64 [ffff881e47ce3e60] vfs_ioctl at ffffffff8118db82
#65 [ffff881e47ce3ea0] do_vfs_ioctl at ffffffff8118e04a
#66 [ffff881e47ce3f30] sys_ioctl at ffffffff8118e2a1
#67 [ffff881e47ce3f80] system_call_fastpath at ffffffff8100b0f2
    RIP: 00007faceea17a87  RSP: 00007faceab8ba90  RFLAGS: 00000206
    RAX: 0000000000000010  RBX: ffffffff8100b0f2  RCX: 00007facf232e010
    RDX: 0000000000000000  RSI: 000000000000ae80  RDI: 0000000000000010
    RBP: 00007facf54b0e40   R8: 0000000020047000   R9: 00007facf2b3f420
    R10: 0000000000000000  R11: 0000000000000246  R12: 00007facf2468000
    R13: 00007facf54b0f30  R14: 0000000000000000  R15: 00007facf2467000
    ORIG_RAX: 0000000000000010  CS: 0033  SS: 002b

Re: kernel panic

[John David Anglin]

On 2/4/2013 2:52 PM, Helge Deller wrote:
> I found this kernel panic on one of my machines.
> Seems to be signal-related...
There seem to be two issues.  For the second, can you see any reason
why the pointer to the lock would be corrupt (i.e., point to NULL).

Dave

-- 
John David Anglin    dave.anglin@bell.net

kernel panic

[Helge Deller]

I found this kernel panic on one of my machines.
Seems to be signal-related...
Helge

[98879.332000] WARNING: at mm/mmap.c:2657
[98879.380000] Modules linked in:
[98879.416000]
[98879.432000]      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[98879.488000] PSW: 00001000000001000000000100001111 Not tainted
[98879.560000] r00-03  000000000804010f 0000000040a9a1f0 000000004013fcfc 0000000000000000
[98879.656000] r04-07  0000000040a3f1f0 00000000bd90b300 00000000000001be 00000000acf68770
[98879.752000] r08-11  0000000000100000 0000000000000001 0000000000020000 0000000000180000
[98879.848000] r12-15  000000000d800000 0000000040a9b1f0 0000000000800100 0000000000040004
[98879.944000] r16-19  0000000040a9b9f0 0000000040a571f0 0000000040a571f0 0000000040889500
[98880.040000] r20-23  000000000007002f 000000000800000e 000000000800000f 00000000401fdb70
[98880.136000] r24-27  ffffffffffffffe0 fffffffffffffe42 00000000409a9000 0000000040a3f1f0
[98880.232000] r28-31  0000000000000001 00000000acf68800 00000000acf687a0 0000000001f32000
[98880.328000] sr00-03  0000000003fec800 0000000000000000 0000000000000000 0000000003fc3800
[98880.424000] sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[98880.520000]
[98880.540000] IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040200118 000000004020011c
[98880.640000]  IIR: 03ffe01f    ISR: 0000000000000000  IOR: 0000000000000000
[98880.720000]  CPU:        0   CR30: 00000000acf68000 CR31: 00000000ffffffff
[98880.804000]  ORIG_R28: 0000000000000000
[98880.852000]  IAOQ[0]: exit_mmap+0x240/0x268
[98880.900000]  IAOQ[1]: exit_mmap+0x244/0x268
[98880.952000]  RP(r2): mmput+0x10c/0x258
[98880.996000] Backtrace:
[98881.024000]  [<000000004013fcfc>] mmput+0x10c/0x258
[98881.084000]  [<000000004014b9d0>] do_exit+0x680/0xef0
[98881.144000]  [<000000004014c550>] do_group_exit+0xc0/0x128
[98881.212000]  [<000000004015c9ec>] get_signal_to_deliver+0x794/0x7f8
[98881.284000]  [<0000000040124af0>] do_signal+0x68/0xc08
[98881.348000]  [<00000000401256bc>] do_notify_resume+0x2c/0xd0
[98881.416000]  [<00000000401050b8>] intr_check_sig+0x34/0x38
[98881.480000]
[98881.500000] ---[ end trace 0f7f718b0b117609 ]---
[98881.556000] BUG: Bad rss-counter state mm:00000000bd90b300 idx:0 val:20
[98881.636000] BUG: Bad rss-counter state mm:00000000bd90b300 idx:1 val:5
[98884.412000] BUG: Bad page state in process xxxmake  pfn:6cd9c
[98884.412000] page:00000000425e1a20 count:-1 mapcount:0 mapping:          (null) index:0x0
[98884.412000] page flags: 0x0()
[98884.412000] Modules linked in:
[98884.412000] Backtrace:
[98884.412000]  [<000000004011ba04>] dump_stack+0x24/0x30
[98884.412000]  [<00000000401ce9ac>] bad_page+0x1cc/0x250
[98884.412000]  [<00000000401cf0ec>] get_page_from_freelist+0x58c/0x7e8
[98884.412000]  [<00000000401d0460>] __alloc_pages_nodemask+0x198/0xaa8
[98884.412000]  [<000000004060c02c>] __netdev_alloc_frag+0xc4/0x270
[98884.412000]  [<000000004061289c>] __netdev_alloc_skb+0x74/0x178
[98884.412000]  [<00000000405cb01c>] tulip_interrupt+0x4c4/0x18b0
[98885.164000]
[98885.164000] Disabling lock debugging due to kernel taint
[101813.652000] Backtrace:
[101813.684000]  [<00000000404534f0>] __down_read_trylock+0x40/0xb0
[101813.756000]  [<00000000401765ec>] down_read_trylock+0x24/0x30
[101813.824000]  [<0000000040206a5c>] page_lock_anon_vma_read+0x6c/0x258
[101813.904000]  [<0000000040207054>] page_referenced+0x134/0x3f0
[101813.972000]  [<00000000401db818>] shrink_active_list+0x400/0x5d8
[101814.044000]  [<00000000401dd834>] shrink_lruvec+0x5e4/0x718
[101814.112000]  [<00000000401de934>] kswapd+0x894/0xcf0
[101814.172000]  [<000000004016f758>] kthread+0x168/0x190
[101814.236000]  [<0000000040104020>] end_fault_vector+0x20/0xc0
[101814.304000]  [<00000000401b1828>] handle_irq_event_percpu+0x300/0x360
[101814.384000]  [<00000000401b6ddc>] handle_percpu_irq+0xd4/0xe8
[101814.452000]  [<000000004014ee8c>] irq_exit+0x8c/0x98
[101814.512000]  [<000000004060df14>] skb_free_head+0x64/0x98
[101814.580000]  [<000000004060e0e8>] skb_release_data+0x1a0/0x1b8
[101814.648000]  [<000000004060e26c>] __kfree_skb+0x16c/0x180
[101814.716000]  [<0000000040678158>] tcp_data_queue+0x8e8/0xf80
[101814.784000]
[101814.804000]
[101814.820000] Kernel Fault: Code=26 regs=00000000bf4cc9b0 (Addr=000000000000000c)
[101814.908000]
[101814.928000]      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[101814.988000] PSW: 00001000000001001111100100001110 Tainted: G    B   W
[101815.068000] r00-03  000000ff0804f90e 0000000040a2a710 00000000404534f0 0000000000000008
[101815.164000] r04-07  0000000040a3f1f0 00000000bd6cf2d9 000000000000000c 0000000042200f20
[101815.260000] r08-11  00000000bf4cc618 0000000000000000 00000000bf4cc288 ffffffffffffffe0
[101815.360000] r12-15  0000000000000015 00000000408fac80 0000000040a9a9f0 0000000000000001
[101815.456000] r16-19  0000000040a9a1f0 0000000042200f40 0000000042200f20 0000000000000001
[101815.552000] r20-23  00000000bf4cc608 0000000000000000 0000000000000000 00000000bf4cc618
[101815.648000] r24-27  0000000000000000 0000000000000000 000000000000000c 0000000040a3f1f0
[101815.744000] r28-31  000000000800000f 00000000bf4cc980 00000000bf4cc9b0 00000000bd6cf2d8
[101815.844000] sr00-03  00000000072bd000 000000000009d800 0000000000000000 00000000072bd000
[101815.940000] sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[101816.040000]
[101816.056000] IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040117670 0000000040117674
[101816.160000]  IIR: 0f4015df    ISR: 0000000000000000  IOR: 000000000000000c
[101816.244000]  CPU:        1   CR30: 00000000bf4cc000 CR31: 00000000ffffffff
[101816.324000]  ORIG_R28: 0000000040a3f1f0
[101816.372000]  IAOQ[0]: _raw_spin_lock_irqsave+0x28/0x38
[101816.436000]  IAOQ[1]: _raw_spin_lock_irqsave+0x2c/0x38
[101816.496000]  RP(r2): __down_read_trylock+0x40/0xb0
[101816.556000] Backtrace: 
[101816.584000]  [<00000000404534f0>] __down_read_trylock+0x40/0xb0
[101816.656000]  [<00000000401765ec>] down_read_trylock+0x24/0x30
[101816.728000]  [<0000000040206a5c>] page_lock_anon_vma_read+0x6c/0x258
[101816.804000]  [<0000000040207054>] page_referenced+0x134/0x3f0
[101816.876000]  [<00000000401db818>] shrink_active_list+0x400/0x5d8
[101816.948000]  [<00000000401dd834>] shrink_lruvec+0x5e4/0x718
[101817.016000]  [<00000000401de934>] kswapd+0x894/0xcf0
[101817.076000]  [<000000004016f758>] kthread+0x168/0x190
[101817.136000]  [<0000000040104020>] end_fault_vector+0x20/0xc0
[101817.208000]  [<00000000401b1828>] handle_irq_event_percpu+0x300/0x360
[101817.284000]  [<00000000401b6ddc>] handle_percpu_irq+0xd4/0xe8
[101817.356000]  [<000000004014ee8c>] irq_exit+0x8c/0x98
[101817.416000]  [<000000004060df14>] skb_free_head+0x64/0x98
[101817.480000]  [<000000004060e0e8>] skb_release_data+0x1a0/0x1b8
[101817.552000]  [<000000004060e26c>] __kfree_skb+0x16c/0x180
[101817.616000]  [<0000000040678158>] tcp_data_queue+0x8e8/0xf80
[101817.684000]
[101817.708000] Kernel panic - not syncing: Kernel Fault

Re: Kernel panic

[rh]

On Sun, 02 Dec 2012 18:51:11 +0100
Stefan Beller <stefanbeller@googlemail.com> wrote:

> So I tested vanilla v3.6 and v3.5 as well and this panic comes up.
> Hence I guess my .config is screwed or the way I install the
> kernel.

I started having problems with using make oldconfig on my netbook in
3.6.6 or 3.6.7 with similar panics.

I reverted back to an old .config from 3.3.x, I think it was the oldest
one I had around, and is why I chose it. I didn't try anything between
3.3.x and 3.6.{6,7}

I have no way to capture the output from the panic.

I also tried re-creating a new config but that didn't work and was
painful BAR and because it's painful BAR I use make oldconfig. But I
admit it scares me a little to do so because history has shown that
slogging old crap around can bite.

Is the lesson here that at some point make oldconfig is going to
stop working and that's just the way it is?

Is the config discussion appropriate here? Or maybe there's a better
way and I'm just old school. It seems like the config thing is more
painful than it was rather than less painful.

> 
> On 12/02/2012 06:30 PM, Stefan Beller wrote:
> > Hello,
> > 
> > so I tested v3.7-rc7-163-g3c46f3d and got a kernel panic.
> > Usually I am running Ubuntu on my Dell Latitutde E6520,
> > which usually works fine except some sound issues.
> > 
> > I did this:
> > 
> > git clone https://github.com/torvalds/linux.git
> > cd linux
> > make deb-pkg
> > cd ..
> > dpkg -i linux-headers-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
> > dpkg -i linux-image-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
> > dpkg -i linux-libc-dev_3.7.0-rc7+-3_amd64.deb
> > 
> > Rebooting yields a panic, 
> > see panic stack trace and .config below
> > 
> > How would I help further fixing this issue?
> > 
> > ---------------------------------
> > the screen reads:
> > ---------------------------------
> > early console in decompress_kernel
> > 
> > Decompressing Linux... Parsing ELF... done.
> > Booting the kernel.
> > drivers/rtc/hctosyys.c: unable to open rtc device (rtc0)
> > Kernel panic - not syncing: VFS Unable to mount root fs on
> > unknown-block(0,0) Pid: 1, com: swapper/0 Not tainted 3.7.0-rc7+ #3
> > Call Trace:
> >  [<ffffffff8127a2c3>] panic+0x11a/0x2b3
> >  [<ffffffff8147d42e>] mount_block_root+0x375/0x39a
> >  [<ffffffff8147d4bf>] mount_root+0x6c/0x77
> >  [<ffffffff8147d68b>] prepare_namespace+0x1c1/0x203
> >  [<ffffffff8106aeb3>] ? release_tgcred.isra.8+0x3c/0x3c
> >  [<ffffffff812750b5>] kernel_init+0x2ae/0x433
> >  [<ffffffff8147c5f8>] ? loglevel+0x46/0x46
> >  [<ffffffff81274e07>] ? rest_init+0xd3/0xd3
> >  [<ffffffff812832bc>] ret_from_fork+0x7c/0xb0
> >  [<ffffffff81274e07>] ? rest_init+0xd3/0xd3
> > 
> > ---------------------------------
> > .config
> > ---------------------------------
> > 
> > #
> > # Automatically generated file; DO NOT EDIT.
> > # Linux/x86_64 3.7.0-rc6 Kernel Configuration
> > #
> > CONFIG_64BIT=y
> > CONFIG_X86_64=y
> > CONFIG_X86=y
> > CONFIG_INSTRUCTION_DECODER=y
> > CONFIG_OUTPUT_FORMAT="elf64-x86-64"
> > CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
> > CONFIG_LOCKDEP_SUPPORT=y
> > CONFIG_STACKTRACE_SUPPORT=y
> > CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> > CONFIG_MMU=y
> > CONFIG_NEED_DMA_MAP_STATE=y
> > CONFIG_NEED_SG_DMA_LENGTH=y
> > CONFIG_GENERIC_ISA_DMA=y
> > CONFIG_GENERIC_BUG=y
> > CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> > CONFIG_GENERIC_HWEIGHT=y
> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> > CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> > CONFIG_GENERIC_CALIBRATE_DELAY=y
> > CONFIG_ARCH_HAS_CPU_RELAX=y
> > CONFIG_ARCH_HAS_DEFAULT_IDLE=y
> > CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> > CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
> > CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> > CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
> > CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
> > CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> > CONFIG_ARCH_SUSPEND_POSSIBLE=y
> > CONFIG_ZONE_DMA32=y
> > CONFIG_AUDIT_ARCH=y
> > CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> > CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> > CONFIG_X86_64_SMP=y
> > CONFIG_X86_HT=y
> > CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi
> > -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9
> > -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_SUPPORTS_UPROBES=y
> > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> > CONFIG_CONSTRUCTORS=y CONFIG_HAVE_IRQ_WORK=y
> > CONFIG_IRQ_WORK=y
> > CONFIG_BUILDTIME_EXTABLE_SORT=y
> > 
> > #
> > # General setup
> > #
> > CONFIG_EXPERIMENTAL=y
> > CONFIG_INIT_ENV_ARG_LIMIT=32
> > CONFIG_CROSS_COMPILE=""
> > CONFIG_LOCALVERSION=""
> > # CONFIG_LOCALVERSION_AUTO is not set
> > CONFIG_HAVE_KERNEL_GZIP=y
> > CONFIG_HAVE_KERNEL_BZIP2=y
> > CONFIG_HAVE_KERNEL_LZMA=y
> > CONFIG_HAVE_KERNEL_XZ=y
> > CONFIG_HAVE_KERNEL_LZO=y
> > # CONFIG_KERNEL_GZIP is not set
> > # CONFIG_KERNEL_BZIP2 is not set
> > CONFIG_KERNEL_LZMA=y
> > # CONFIG_KERNEL_XZ is not set
> > # CONFIG_KERNEL_LZO is not set
> > CONFIG_DEFAULT_HOSTNAME="(none)"
> > CONFIG_SWAP=y
> > CONFIG_SYSVIPC=y
> > CONFIG_SYSVIPC_SYSCTL=y
> > CONFIG_FHANDLE=y
> > CONFIG_HAVE_GENERIC_HARDIRQS=y
> > 
> > #
> > # IRQ subsystem
> > #
> > CONFIG_GENERIC_HARDIRQS=y
> > CONFIG_GENERIC_IRQ_PROBE=y
> > CONFIG_GENERIC_IRQ_SHOW=y
> > CONFIG_GENERIC_PENDING_IRQ=y
> > CONFIG_IRQ_DOMAIN=y
> > # CONFIG_IRQ_DOMAIN_DEBUG is not set
> > CONFIG_IRQ_FORCED_THREADING=y
> > CONFIG_SPARSE_IRQ=y
> > CONFIG_CLOCKSOURCE_WATCHDOG=y
> > CONFIG_ARCH_CLOCKSOURCE_DATA=y
> > CONFIG_GENERIC_TIME_VSYSCALL=y
> > CONFIG_GENERIC_CLOCKEVENTS=y
> > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> > CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
> > CONFIG_GENERIC_CMOS_UPDATE=y
> > 
> > #
> > # Timers subsystem
> > #
> > CONFIG_TICK_ONESHOT=y
> > CONFIG_NO_HZ=y
> > CONFIG_HIGH_RES_TIMERS=y
> > 
> > #
> > # CPU/Task time and stats accounting
> > #
> > # CONFIG_TICK_CPU_ACCOUNTING is not set
> > CONFIG_IRQ_TIME_ACCOUNTING=y
> > CONFIG_BSD_PROCESS_ACCT=y
> > # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> > 
> > #
> > # RCU Subsystem
> > #
> > CONFIG_TREE_PREEMPT_RCU=y
> > CONFIG_PREEMPT_RCU=y
> > # CONFIG_RCU_USER_QS is not set
> > CONFIG_RCU_FANOUT=64
> > CONFIG_RCU_FANOUT_LEAF=16
> > CONFIG_RCU_FANOUT_EXACT=y
> > # CONFIG_RCU_FAST_NO_HZ is not set
> > # CONFIG_TREE_RCU_TRACE is not set
> > CONFIG_RCU_BOOST=y
> > CONFIG_RCU_BOOST_PRIO=1
> > CONFIG_RCU_BOOST_DELAY=500
> > # CONFIG_IKCONFIG is not set
> > CONFIG_LOG_BUF_SHIFT=17
> > CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> > # CONFIG_CGROUPS is not set
> > # CONFIG_CHECKPOINT_RESTORE is not set
> > CONFIG_NAMESPACES=y
> > # CONFIG_UTS_NS is not set
> > CONFIG_IPC_NS=y
> > CONFIG_PID_NS=y
> > # CONFIG_SCHED_AUTOGROUP is not set
> > CONFIG_SYSFS_DEPRECATED=y
> > CONFIG_SYSFS_DEPRECATED_V2=y
> > # CONFIG_RELAY is not set
> > # CONFIG_BLK_DEV_INITRD is not set
> > CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> > CONFIG_SYSCTL=y
> > CONFIG_ANON_INODES=y
> > # CONFIG_EXPERT is not set
> > # CONFIG_SYSCTL_SYSCALL is not set
> > CONFIG_SYSCTL_EXCEPTION_TRACE=y
> > CONFIG_KALLSYMS=y
> > CONFIG_HOTPLUG=y
> > CONFIG_PRINTK=y
> > CONFIG_BUG=y
> > CONFIG_ELF_CORE=y
> > CONFIG_PCSPKR_PLATFORM=y
> > CONFIG_HAVE_PCSPKR_PLATFORM=y
> > CONFIG_BASE_FULL=y
> > CONFIG_FUTEX=y
> > CONFIG_EPOLL=y
> > CONFIG_SIGNALFD=y
> > CONFIG_TIMERFD=y
> > CONFIG_EVENTFD=y
> > CONFIG_SHMEM=y
> > CONFIG_AIO=y
> > # CONFIG_EMBEDDED is not set
> > CONFIG_HAVE_PERF_EVENTS=y
> > 
> > #
> > # Kernel Performance Events And Counters
> > #
> > CONFIG_PERF_EVENTS=y
> > CONFIG_VM_EVENT_COUNTERS=y
> > CONFIG_SLUB_DEBUG=y
> > CONFIG_COMPAT_BRK=y
> > # CONFIG_SLAB is not set
> > CONFIG_SLUB=y
> > CONFIG_PROFILING=y
> > CONFIG_TRACEPOINTS=y
> > CONFIG_OPROFILE=m
> > # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
> > CONFIG_HAVE_OPROFILE=y
> > CONFIG_OPROFILE_NMI_TIMER=y
> > # CONFIG_KPROBES is not set
> > CONFIG_JUMP_LABEL=y
> > CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> > CONFIG_HAVE_IOREMAP_PROT=y
> > CONFIG_HAVE_KPROBES=y
> > CONFIG_HAVE_KRETPROBES=y
> > CONFIG_HAVE_OPTPROBES=y
> > CONFIG_HAVE_ARCH_TRACEHOOK=y
> > CONFIG_HAVE_DMA_ATTRS=y
> > CONFIG_USE_GENERIC_SMP_HELPERS=y
> > CONFIG_GENERIC_SMP_IDLE_THREAD=y
> > CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> > CONFIG_HAVE_DMA_API_DEBUG=y
> > CONFIG_HAVE_HW_BREAKPOINT=y
> > CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
> > CONFIG_HAVE_USER_RETURN_NOTIFIER=y
> > CONFIG_HAVE_PERF_EVENTS_NMI=y
> > CONFIG_HAVE_PERF_REGS=y
> > CONFIG_HAVE_PERF_USER_STACK_DUMP=y
> > CONFIG_HAVE_ARCH_JUMP_LABEL=y
> > CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
> > CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
> > CONFIG_HAVE_CMPXCHG_LOCAL=y
> > CONFIG_HAVE_CMPXCHG_DOUBLE=y
> > CONFIG_GENERIC_KERNEL_THREAD=y
> > CONFIG_GENERIC_KERNEL_EXECVE=y
> > CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
> > CONFIG_HAVE_RCU_USER_QS=y
> > CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
> > CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
> > CONFIG_MODULES_USE_ELF_RELA=y
> > 
> > #
> > # GCOV-based kernel profiling
> > #
> > CONFIG_GCOV_KERNEL=y
> > CONFIG_GCOV_PROFILE_ALL=y
> > # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> > CONFIG_SLABINFO=y
> > CONFIG_RT_MUTEXES=y
> > CONFIG_BASE_SMALL=0
> > CONFIG_MODULES=y
> > CONFIG_MODULE_FORCE_LOAD=y
> > # CONFIG_MODULE_UNLOAD is not set
> > CONFIG_MODVERSIONS=y
> > # CONFIG_MODULE_SRCVERSION_ALL is not set
> > CONFIG_MODULE_SIG=y
> > CONFIG_MODULE_SIG_FORCE=y
> > # CONFIG_MODULE_SIG_SHA1 is not set
> > # CONFIG_MODULE_SIG_SHA224 is not set
> > # CONFIG_MODULE_SIG_SHA256 is not set
> > CONFIG_MODULE_SIG_SHA384=y
> > # CONFIG_MODULE_SIG_SHA512 is not set
> > CONFIG_STOP_MACHINE=y
> > CONFIG_BLOCK=y
> > CONFIG_BLK_DEV_BSG=y
> > # CONFIG_BLK_DEV_BSGLIB is not set
> > # CONFIG_BLK_DEV_INTEGRITY is not set
> > 
> > #
> > # Partition Types
> > #
> > # CONFIG_PARTITION_ADVANCED is not set
> > CONFIG_MSDOS_PARTITION=y
> > 
> > #
> > # IO Schedulers
> > #
> > CONFIG_IOSCHED_NOOP=y
> > CONFIG_IOSCHED_DEADLINE=m
> > # CONFIG_IOSCHED_CFQ is not set
> > CONFIG_DEFAULT_NOOP=y
> > CONFIG_DEFAULT_IOSCHED="noop"
> > CONFIG_PADATA=y
> > CONFIG_ASN1=y
> > CONFIG_UNINLINE_SPIN_UNLOCK=y
> > CONFIG_MUTEX_SPIN_ON_OWNER=y
> > # CONFIG_FREEZER is not set
> > 
> > #
> > # Processor type and features
> > #
> > CONFIG_ZONE_DMA=y
> > CONFIG_SMP=y
> > CONFIG_X86_MPPARSE=y
> > CONFIG_X86_EXTENDED_PLATFORM=y
> > CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
> > # CONFIG_SCHED_OMIT_FRAME_POINTER is not set
> > CONFIG_PARAVIRT_GUEST=y
> > CONFIG_PARAVIRT_TIME_ACCOUNTING=y
> > # CONFIG_XEN is not set
> > # CONFIG_XEN_PRIVILEGED_GUEST is not set
> > CONFIG_KVM_GUEST=y
> > CONFIG_PARAVIRT=y
> > # CONFIG_PARAVIRT_SPINLOCKS is not set
> > CONFIG_PARAVIRT_CLOCK=y
> > CONFIG_NO_BOOTMEM=y
> > # CONFIG_MEMTEST is not set
> > # CONFIG_MK8 is not set
> > # CONFIG_MPSC is not set
> > # CONFIG_MCORE2 is not set
> > # CONFIG_MATOM is not set
> > CONFIG_GENERIC_CPU=y
> > CONFIG_X86_INTERNODE_CACHE_SHIFT=6
> > CONFIG_X86_CMPXCHG=y
> > CONFIG_X86_L1_CACHE_SHIFT=6
> > CONFIG_X86_XADD=y
> > CONFIG_X86_WP_WORKS_OK=y
> > CONFIG_X86_TSC=y
> > CONFIG_X86_CMPXCHG64=y
> > CONFIG_X86_CMOV=y
> > CONFIG_X86_MINIMUM_CPU_FAMILY=64
> > CONFIG_X86_DEBUGCTLMSR=y
> > CONFIG_CPU_SUP_INTEL=y
> > CONFIG_CPU_SUP_AMD=y
> > CONFIG_CPU_SUP_CENTAUR=y
> > CONFIG_HPET_TIMER=y
> > CONFIG_HPET_EMULATE_RTC=y
> > CONFIG_DMI=y
> > CONFIG_SWIOTLB=y
> > CONFIG_IOMMU_HELPER=y
> > CONFIG_NR_CPUS=8
> > CONFIG_SCHED_SMT=y
> > CONFIG_SCHED_MC=y
> > # CONFIG_PREEMPT_NONE is not set
> > # CONFIG_PREEMPT_VOLUNTARY is not set
> > CONFIG_PREEMPT=y
> > CONFIG_PREEMPT_COUNT=y
> > CONFIG_X86_LOCAL_APIC=y
> > CONFIG_X86_IO_APIC=y
> > CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
> > CONFIG_X86_MCE=y
> > # CONFIG_X86_MCE_INTEL is not set
> > # CONFIG_X86_MCE_AMD is not set
> > # CONFIG_X86_MCE_INJECT is not set
> > CONFIG_I8K=m
> > # CONFIG_MICROCODE is not set
> > CONFIG_X86_MSR=m
> > CONFIG_X86_CPUID=m
> > CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> > CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> > CONFIG_DIRECT_GBPAGES=y
> > CONFIG_NUMA=y
> > # CONFIG_NUMA_EMU is not set
> > CONFIG_NODES_SHIFT=6
> > CONFIG_ARCH_SPARSEMEM_ENABLE=y
> > CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> > CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> > CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
> > CONFIG_SELECT_MEMORY_MODEL=y
> > CONFIG_SPARSEMEM_MANUAL=y
> > CONFIG_SPARSEMEM=y
> > CONFIG_NEED_MULTIPLE_NODES=y
> > CONFIG_HAVE_MEMORY_PRESENT=y
> > CONFIG_SPARSEMEM_EXTREME=y
> > CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> > CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
> > # CONFIG_SPARSEMEM_VMEMMAP is not set
> > CONFIG_HAVE_MEMBLOCK=y
> > CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
> > CONFIG_ARCH_DISCARD_MEMBLOCK=y
> > CONFIG_MEMORY_ISOLATION=y
> > # CONFIG_MEMORY_HOTPLUG is not set
> > CONFIG_PAGEFLAGS_EXTENDED=y
> > CONFIG_SPLIT_PTLOCK_CPUS=4
> > CONFIG_COMPACTION=y
> > CONFIG_MIGRATION=y
> > CONFIG_PHYS_ADDR_T_64BIT=y
> > CONFIG_ZONE_DMA_FLAG=1
> > CONFIG_BOUNCE=y
> > CONFIG_VIRT_TO_BUS=y
> > CONFIG_KSM=y
> > CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> > CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
> > CONFIG_MEMORY_FAILURE=y
> > CONFIG_TRANSPARENT_HUGEPAGE=y
> > CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
> > # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
> > CONFIG_CROSS_MEMORY_ATTACH=y
> > # CONFIG_CLEANCACHE is not set
> > # CONFIG_FRONTSWAP is not set
> > # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> > CONFIG_X86_RESERVE_LOW=64
> > CONFIG_MTRR=y
> > # CONFIG_MTRR_SANITIZER is not set
> > CONFIG_X86_PAT=y
> > CONFIG_ARCH_USES_PG_UNCACHED=y
> > CONFIG_ARCH_RANDOM=y
> > CONFIG_X86_SMAP=y
> > # CONFIG_SECCOMP is not set
> > # CONFIG_CC_STACKPROTECTOR is not set
> > # CONFIG_HZ_100 is not set
> > # CONFIG_HZ_250 is not set
> > CONFIG_HZ_300=y
> > # CONFIG_HZ_1000 is not set
> > CONFIG_HZ=300
> > CONFIG_SCHED_HRTICK=y
> > # CONFIG_KEXEC is not set
> > CONFIG_CRASH_DUMP=y
> > CONFIG_PHYSICAL_START=0x1000000
> > # CONFIG_RELOCATABLE is not set
> > CONFIG_PHYSICAL_ALIGN=0x1000000
> > # CONFIG_HOTPLUG_CPU is not set
> > CONFIG_CMDLINE_BOOL=y
> > CONFIG_CMDLINE=""
> > # CONFIG_CMDLINE_OVERRIDE is not set
> > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> > CONFIG_USE_PERCPU_NUMA_NODE_ID=y
> > 
> > #
> > # Power management and ACPI options
> > #
> > # CONFIG_SUSPEND is not set
> > # CONFIG_HIBERNATION is not set
> > # CONFIG_PM_RUNTIME is not set
> > CONFIG_SFI=y
> > 
> > #
> > # CPU Frequency scaling
> > #
> > CONFIG_CPU_FREQ=y
> > CONFIG_CPU_FREQ_TABLE=m
> > CONFIG_CPU_FREQ_STAT=m
> > # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> > CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
> > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> > CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> > CONFIG_CPU_FREQ_GOV_USERSPACE=m
> > # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
> > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> > 
> > #
> > # x86 CPU frequency scaling drivers
> > #
> > # CONFIG_X86_P4_CLOCKMOD is not set
> > 
> > #
> > # shared options
> > #
> > # CONFIG_X86_SPEEDSTEP_LIB is not set
> > # CONFIG_CPU_IDLE is not set
> > # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
> > 
> > #
> > # Memory power savings
> > #
> > CONFIG_I7300_IDLE_IOAT_CHANNEL=y
> > CONFIG_I7300_IDLE=m
> > 
> > #
> > # Bus options (PCI etc.)
> > #
> > # CONFIG_PCI is not set
> > CONFIG_PCI_LABEL=y
> > CONFIG_ISA_DMA_API=y
> > # CONFIG_PCCARD is not set
> > 
> > #
> > # Executable file formats / Emulations
> > #
> > CONFIG_BINFMT_ELF=y
> > CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
> > # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> > # CONFIG_HAVE_AOUT is not set
> > CONFIG_BINFMT_MISC=m
> > CONFIG_COREDUMP=y
> > # CONFIG_IA32_EMULATION is not set
> > CONFIG_HAVE_TEXT_POKE_SMP=y
> > CONFIG_X86_DEV_DMA_OPS=y
> > # CONFIG_NET is not set
> > CONFIG_HAVE_BPF_JIT=y
> > 
> > #
> > # Device Drivers
> > #
> > 
> > #
> > # Generic Driver Options
> > #
> > CONFIG_UEVENT_HELPER_PATH=""
> > # CONFIG_DEVTMPFS is not set
> > # CONFIG_STANDALONE is not set
> > CONFIG_PREVENT_FIRMWARE_BUILD=y
> > CONFIG_FW_LOADER=y
> > CONFIG_FIRMWARE_IN_KERNEL=y
> > CONFIG_EXTRA_FIRMWARE=""
> > # CONFIG_SYS_HYPERVISOR is not set
> > # CONFIG_GENERIC_CPU_DEVICES is not set
> > CONFIG_REGMAP=y
> > CONFIG_REGMAP_I2C=m
> > CONFIG_REGMAP_SPI=y
> > CONFIG_REGMAP_IRQ=y
> > CONFIG_DMA_SHARED_BUFFER=y
> > 
> > #
> > # Bus devices
> > #
> > CONFIG_OMAP_OCP2SCP=m
> > CONFIG_MTD=m
> > CONFIG_MTD_TESTS=m
> > CONFIG_MTD_REDBOOT_PARTS=m
> > CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> > # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> > CONFIG_MTD_REDBOOT_PARTS_READONLY=y
> > # CONFIG_MTD_AR7_PARTS is not set
> > 
> > #
> > # User Modules And Translation Layers
> > #
> > # CONFIG_MTD_CHAR is not set
> > CONFIG_HAVE_MTD_OTP=y
> > CONFIG_MTD_BLKDEVS=m
> > CONFIG_MTD_BLOCK=m
> > CONFIG_MTD_BLOCK_RO=m
> > CONFIG_FTL=m
> > # CONFIG_NFTL is not set
> > # CONFIG_INFTL is not set
> > CONFIG_RFD_FTL=m
> > # CONFIG_SSFDC is not set
> > CONFIG_SM_FTL=m
> > # CONFIG_MTD_OOPS is not set
> > CONFIG_MTD_SWAP=m
> > 
> > #
> > # RAM/ROM/Flash chip drivers
> > #
> > CONFIG_MTD_CFI=m
> > CONFIG_MTD_JEDECPROBE=m
> > CONFIG_MTD_GEN_PROBE=m
> > CONFIG_MTD_CFI_ADV_OPTIONS=y
> > CONFIG_MTD_CFI_NOSWAP=y
> > # CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
> > # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
> > # CONFIG_MTD_CFI_GEOMETRY is not set
> > CONFIG_MTD_MAP_BANK_WIDTH_1=y
> > CONFIG_MTD_MAP_BANK_WIDTH_2=y
> > CONFIG_MTD_MAP_BANK_WIDTH_4=y
> > # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> > # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> > # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> > CONFIG_MTD_CFI_I1=y
> > CONFIG_MTD_CFI_I2=y
> > # CONFIG_MTD_CFI_I4 is not set
> > # CONFIG_MTD_CFI_I8 is not set
> > CONFIG_MTD_OTP=y
> > CONFIG_MTD_CFI_INTELEXT=m
> > CONFIG_MTD_CFI_AMDSTD=m
> > # CONFIG_MTD_CFI_STAA is not set
> > CONFIG_MTD_CFI_UTIL=m
> > CONFIG_MTD_RAM=m
> > # CONFIG_MTD_ROM is not set
> > CONFIG_MTD_ABSENT=m
> > 
> > #
> > # Mapping drivers for chip access
> > #
> > CONFIG_MTD_COMPLEX_MAPPINGS=y
> > CONFIG_MTD_PHYSMAP=m
> > CONFIG_MTD_PHYSMAP_COMPAT=y
> > CONFIG_MTD_PHYSMAP_START=0x8000000
> > CONFIG_MTD_PHYSMAP_LEN=0
> > CONFIG_MTD_PHYSMAP_BANKWIDTH=2
> > CONFIG_MTD_SC520CDP=m
> > CONFIG_MTD_NETSC520=m
> > CONFIG_MTD_TS5500=m
> > # CONFIG_MTD_SBC_GXX is not set
> > # CONFIG_MTD_AMD76XROM is not set
> > CONFIG_MTD_ICHXROM=m
> > # CONFIG_MTD_NETtel is not set
> > CONFIG_MTD_L440GX=m
> > CONFIG_MTD_PLATRAM=m
> > # CONFIG_MTD_LATCH_ADDR is not set
> > 
> > #
> > # Self-contained MTD device drivers
> > #
> > CONFIG_MTD_DATAFLASH=m
> > CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
> > # CONFIG_MTD_DATAFLASH_OTP is not set
> > CONFIG_MTD_M25P80=m
> > CONFIG_M25PXX_USE_FAST_READ=y
> > CONFIG_MTD_SST25L=m
> > # CONFIG_MTD_SLRAM is not set
> > # CONFIG_MTD_PHRAM is not set
> > # CONFIG_MTD_MTDRAM is not set
> > CONFIG_MTD_BLOCK2MTD=m
> > 
> > #
> > # Disk-On-Chip Device Drivers
> > #
> > # CONFIG_MTD_DOCG3 is not set
> > CONFIG_MTD_NAND_ECC=m
> > # CONFIG_MTD_NAND_ECC_SMC is not set
> > # CONFIG_MTD_NAND is not set
> > # CONFIG_MTD_ONENAND is not set
> > 
> > #
> > # LPDDR flash memory drivers
> > #
> > # CONFIG_MTD_LPDDR is not set
> > # CONFIG_MTD_UBI is not set
> > # CONFIG_PARPORT is not set
> > # CONFIG_BLK_DEV is not set
> > 
> > #
> > # Misc devices
> > #
> > CONFIG_SENSORS_LIS3LV02D=m
> > CONFIG_AD525X_DPOT=m
> > # CONFIG_AD525X_DPOT_I2C is not set
> > # CONFIG_AD525X_DPOT_SPI is not set
> > # CONFIG_ICS932S401 is not set
> > # CONFIG_ENCLOSURE_SERVICES is not set
> > # CONFIG_APDS9802ALS is not set
> > # CONFIG_ISL29003 is not set
> > # CONFIG_ISL29020 is not set
> > # CONFIG_SENSORS_TSL2550 is not set
> > # CONFIG_SENSORS_BH1780 is not set
> > # CONFIG_SENSORS_BH1770 is not set
> > CONFIG_SENSORS_APDS990X=m
> > # CONFIG_HMC6352 is not set
> > # CONFIG_DS1682 is not set
> > CONFIG_TI_DAC7512=m
> > # CONFIG_VMWARE_BALLOON is not set
> > # CONFIG_BMP085_I2C is not set
> > # CONFIG_BMP085_SPI is not set
> > # CONFIG_USB_SWITCH_FSA9480 is not set
> > CONFIG_C2PORT=m
> > # CONFIG_C2PORT_DURAMAR_2150 is not set
> > 
> > #
> > # EEPROM support
> > #
> > # CONFIG_EEPROM_AT24 is not set
> > CONFIG_EEPROM_AT25=m
> > CONFIG_EEPROM_LEGACY=m
> > CONFIG_EEPROM_MAX6875=m
> > # CONFIG_EEPROM_93CX6 is not set
> > # CONFIG_EEPROM_93XX46 is not set
> > 
> > #
> > # Texas Instruments shared transport line discipline
> > #
> > CONFIG_SENSORS_LIS3_SPI=m
> > # CONFIG_SENSORS_LIS3_I2C is not set
> > 
> > #
> > # Altera FPGA firmware download module
> > #
> > CONFIG_ALTERA_STAPL=m
> > CONFIG_HAVE_IDE=y
> > # CONFIG_IDE is not set
> > 
> > #
> > # SCSI device support
> > #
> > CONFIG_SCSI_MOD=y
> > # CONFIG_RAID_ATTRS is not set
> > # CONFIG_SCSI is not set
> > # CONFIG_SCSI_DMA is not set
> > # CONFIG_SCSI_NETLINK is not set
> > # CONFIG_ATA is not set
> > # CONFIG_MD is not set
> > CONFIG_MACINTOSH_DRIVERS=y
> > # CONFIG_MAC_EMUMOUSEBTN is not set
> > 
> > #
> > # Input device support
> > #
> > CONFIG_INPUT=y
> > # CONFIG_INPUT_FF_MEMLESS is not set
> > CONFIG_INPUT_POLLDEV=m
> > CONFIG_INPUT_SPARSEKMAP=m
> > CONFIG_INPUT_MATRIXKMAP=m
> > 
> > #
> > # Userland interfaces
> > #
> > CONFIG_INPUT_MOUSEDEV=y
> > CONFIG_INPUT_MOUSEDEV_PSAUX=y
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > # CONFIG_INPUT_JOYDEV is not set
> > # CONFIG_INPUT_EVDEV is not set
> > # CONFIG_INPUT_EVBUG is not set
> > 
> > #
> > # Input Device Drivers
> > #
> > CONFIG_INPUT_KEYBOARD=y
> > CONFIG_KEYBOARD_ADP5588=m
> > # CONFIG_KEYBOARD_ADP5589 is not set
> > CONFIG_KEYBOARD_ATKBD=y
> > # CONFIG_KEYBOARD_QT1070 is not set
> > # CONFIG_KEYBOARD_QT2160 is not set
> > # CONFIG_KEYBOARD_LKKBD is not set
> > # CONFIG_KEYBOARD_TCA6416 is not set
> > # CONFIG_KEYBOARD_TCA8418 is not set
> > CONFIG_KEYBOARD_LM8323=m
> > CONFIG_KEYBOARD_LM8333=m
> > CONFIG_KEYBOARD_MAX7359=m
> > # CONFIG_KEYBOARD_MCS is not set
> > # CONFIG_KEYBOARD_MPR121 is not set
> > # CONFIG_KEYBOARD_NEWTON is not set
> > # CONFIG_KEYBOARD_OPENCORES is not set
> > # CONFIG_KEYBOARD_STOWAWAY is not set
> > CONFIG_KEYBOARD_SUNKBD=m
> > CONFIG_KEYBOARD_STMPE=m
> > CONFIG_KEYBOARD_OMAP4=m
> > # CONFIG_KEYBOARD_XTKBD is not set
> > # CONFIG_INPUT_MOUSE is not set
> > CONFIG_INPUT_JOYSTICK=y
> > # CONFIG_JOYSTICK_ANALOG is not set
> > CONFIG_JOYSTICK_A3D=m
> > CONFIG_JOYSTICK_ADI=m
> > # CONFIG_JOYSTICK_COBRA is not set
> > # CONFIG_JOYSTICK_GF2K is not set
> > CONFIG_JOYSTICK_GRIP=m
> > # CONFIG_JOYSTICK_GRIP_MP is not set
> > CONFIG_JOYSTICK_GUILLEMOT=m
> > # CONFIG_JOYSTICK_INTERACT is not set
> > # CONFIG_JOYSTICK_SIDEWINDER is not set
> > # CONFIG_JOYSTICK_TMDC is not set
> > # CONFIG_JOYSTICK_IFORCE is not set
> > CONFIG_JOYSTICK_WARRIOR=m
> > CONFIG_JOYSTICK_MAGELLAN=m
> > CONFIG_JOYSTICK_SPACEORB=m
> > CONFIG_JOYSTICK_SPACEBALL=m
> > # CONFIG_JOYSTICK_STINGER is not set
> > CONFIG_JOYSTICK_TWIDJOY=m
> > CONFIG_JOYSTICK_ZHENHUA=m
> > # CONFIG_JOYSTICK_AS5011 is not set
> > # CONFIG_JOYSTICK_JOYDUMP is not set
> > CONFIG_INPUT_TABLET=y
> > # CONFIG_INPUT_TOUCHSCREEN is not set
> > # CONFIG_INPUT_MISC is not set
> > 
> > #
> > # Hardware I/O ports
> > #
> > CONFIG_SERIO=y
> > CONFIG_SERIO_I8042=y
> > CONFIG_SERIO_SERPORT=m
> > CONFIG_SERIO_CT82C710=m
> > CONFIG_SERIO_LIBPS2=y
> > CONFIG_SERIO_RAW=m
> > # CONFIG_SERIO_ALTERA_PS2 is not set
> > CONFIG_SERIO_PS2MULT=m
> > CONFIG_GAMEPORT=m
> > CONFIG_GAMEPORT_NS558=m
> > # CONFIG_GAMEPORT_L4 is not set
> > 
> > #
> > # Character devices
> > #
> > CONFIG_VT=y
> > CONFIG_CONSOLE_TRANSLATIONS=y
> > CONFIG_VT_CONSOLE=y
> > CONFIG_HW_CONSOLE=y
> > # CONFIG_VT_HW_CONSOLE_BINDING is not set
> > CONFIG_UNIX98_PTYS=y
> > CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
> > # CONFIG_LEGACY_PTYS is not set
> > CONFIG_SERIAL_NONSTANDARD=y
> > # CONFIG_N_HDLC is not set
> > CONFIG_TRACE_ROUTER=m
> > CONFIG_TRACE_SINK=m
> > # CONFIG_DEVKMEM is not set
> > # CONFIG_STALDRV is not set
> > 
> > #
> > # Serial drivers
> > #
> > CONFIG_SERIAL_8250=m
> > CONFIG_FIX_EARLYCON_MEM=y
> > CONFIG_SERIAL_8250_NR_UARTS=4
> > CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> > CONFIG_SERIAL_8250_EXTENDED=y
> > CONFIG_SERIAL_8250_MANY_PORTS=y
> > CONFIG_SERIAL_8250_SHARE_IRQ=y
> > CONFIG_SERIAL_8250_DETECT_IRQ=y
> > CONFIG_SERIAL_8250_RSA=y
> > 
> > #
> > # Non-8250 serial port support
> > #
> > # CONFIG_SERIAL_MAX3100 is not set
> > # CONFIG_SERIAL_MAX310X is not set
> > CONFIG_SERIAL_CORE=m
> > # CONFIG_SERIAL_SCCNXP is not set
> > CONFIG_SERIAL_TIMBERDALE=m
> > CONFIG_SERIAL_ALTERA_JTAGUART=m
> > CONFIG_SERIAL_ALTERA_UART=m
> > CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
> > CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
> > # CONFIG_SERIAL_XILINX_PS_UART is not set
> > CONFIG_HVC_DRIVER=y
> > CONFIG_VIRTIO_CONSOLE=m
> > CONFIG_IPMI_HANDLER=m
> > # CONFIG_IPMI_PANIC_EVENT is not set
> > CONFIG_IPMI_DEVICE_INTERFACE=m
> > CONFIG_IPMI_SI=m
> > # CONFIG_IPMI_WATCHDOG is not set
> > CONFIG_IPMI_POWEROFF=m
> > CONFIG_HW_RANDOM=m
> > # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> > # CONFIG_HW_RANDOM_VIA is not set
> > CONFIG_HW_RANDOM_VIRTIO=m
> > # CONFIG_HW_RANDOM_TPM is not set
> > CONFIG_NVRAM=m
> > CONFIG_R3964=m
> > # CONFIG_MWAVE is not set
> > CONFIG_RAW_DRIVER=m
> > CONFIG_MAX_RAW_DEVS=256
> > # CONFIG_HANGCHECK_TIMER is not set
> > CONFIG_TCG_TPM=m
> > # CONFIG_TCG_TIS is not set
> > CONFIG_TCG_TIS_I2C_INFINEON=m
> > # CONFIG_TCG_NSC is not set
> > # CONFIG_TCG_ATMEL is not set
> > # CONFIG_TELCLOCK is not set
> > CONFIG_I2C=m
> > CONFIG_I2C_BOARDINFO=y
> > CONFIG_I2C_COMPAT=y
> > # CONFIG_I2C_CHARDEV is not set
> > # CONFIG_I2C_MUX is not set
> > CONFIG_I2C_HELPER_AUTO=y
> > CONFIG_I2C_SMBUS=m
> > CONFIG_I2C_ALGOBIT=m
> > CONFIG_I2C_ALGOPCA=m
> > 
> > #
> > # I2C Hardware Bus support
> > #
> > 
> > #
> > # I2C system bus drivers (mostly embedded / system-on-chip)
> > #
> > CONFIG_I2C_OCORES=m
> > CONFIG_I2C_PCA_PLATFORM=m
> > # CONFIG_I2C_PXA_PCI is not set
> > # CONFIG_I2C_SIMTEC is not set
> > CONFIG_I2C_XILINX=m
> > 
> > #
> > # External I2C/SMBus adapter drivers
> > #
> > CONFIG_I2C_PARPORT_LIGHT=m
> > # CONFIG_I2C_TAOS_EVM is not set
> > 
> > #
> > # Other I2C/SMBus bus drivers
> > #
> > # CONFIG_I2C_STUB is not set
> > CONFIG_I2C_DEBUG_CORE=y
> > # CONFIG_I2C_DEBUG_ALGO is not set
> > CONFIG_I2C_DEBUG_BUS=y
> > CONFIG_SPI=y
> > CONFIG_SPI_MASTER=y
> > 
> > #
> > # SPI Master Controller Drivers
> > #
> > # CONFIG_SPI_ALTERA is not set
> > CONFIG_SPI_BITBANG=m
> > # CONFIG_SPI_PXA2XX_PCI is not set
> > # CONFIG_SPI_SC18IS602 is not set
> > # CONFIG_SPI_XCOMM is not set
> > CONFIG_SPI_XILINX=m
> > CONFIG_SPI_DESIGNWARE=m
> > 
> > #
> > # SPI Protocol Masters
> > #
> > # CONFIG_SPI_SPIDEV is not set
> > CONFIG_SPI_TLE62X0=m
> > CONFIG_HSI=m
> > CONFIG_HSI_BOARDINFO=y
> > 
> > #
> > # HSI clients
> > #
> > # CONFIG_HSI_CHAR is not set
> > 
> > #
> > # PPS support
> > #
> > # CONFIG_PPS is not set
> > 
> > #
> > # PPS generators support
> > #
> > 
> > #
> > # PTP clock support
> > #
> > 
> > #
> > # Enable Device Drivers -> PPS to see the PTP clock options.
> > #
> > CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> > # CONFIG_GPIOLIB is not set
> > CONFIG_W1=m
> > 
> > #
> > # 1-wire Bus Masters
> > #
> > # CONFIG_W1_MASTER_DS2482 is not set
> > CONFIG_W1_MASTER_DS1WM=m
> > CONFIG_HDQ_MASTER_OMAP=m
> > 
> > #
> > # 1-wire Slaves
> > #
> > CONFIG_W1_SLAVE_THERM=m
> > # CONFIG_W1_SLAVE_SMEM is not set
> > CONFIG_W1_SLAVE_DS2408=m
> > CONFIG_W1_SLAVE_DS2423=m
> > # CONFIG_W1_SLAVE_DS2431 is not set
> > CONFIG_W1_SLAVE_DS2433=m
> > CONFIG_W1_SLAVE_DS2433_CRC=y
> > # CONFIG_W1_SLAVE_DS2760 is not set
> > CONFIG_W1_SLAVE_DS2780=m
> > # CONFIG_W1_SLAVE_DS2781 is not set
> > CONFIG_W1_SLAVE_DS28E04=m
> > # CONFIG_W1_SLAVE_BQ27000 is not set
> > CONFIG_POWER_SUPPLY=y
> > # CONFIG_POWER_SUPPLY_DEBUG is not set
> > # CONFIG_PDA_POWER is not set
> > # CONFIG_TEST_POWER is not set
> > CONFIG_BATTERY_DS2780=m
> > # CONFIG_BATTERY_DS2781 is not set
> > # CONFIG_BATTERY_DS2782 is not set
> > CONFIG_BATTERY_SBS=m
> > CONFIG_BATTERY_BQ27x00=m
> > # CONFIG_BATTERY_BQ27X00_I2C is not set
> > CONFIG_BATTERY_BQ27X00_PLATFORM=y
> > # CONFIG_BATTERY_DA9052 is not set
> > CONFIG_BATTERY_MAX17040=m
> > CONFIG_BATTERY_MAX17042=m
> > CONFIG_CHARGER_PCF50633=m
> > # CONFIG_CHARGER_MAX8903 is not set
> > # CONFIG_CHARGER_LP8727 is not set
> > CONFIG_CHARGER_MANAGER=y
> > # CONFIG_CHARGER_SMB347 is not set
> > CONFIG_POWER_AVS=y
> > CONFIG_HWMON=m
> > CONFIG_HWMON_VID=m
> > # CONFIG_HWMON_DEBUG_CHIP is not set
> > 
> > #
> > # Native drivers
> > #
> > # CONFIG_SENSORS_ABITUGURU is not set
> > CONFIG_SENSORS_ABITUGURU3=m
> > CONFIG_SENSORS_AD7314=m
> > CONFIG_SENSORS_AD7414=m
> > CONFIG_SENSORS_AD7418=m
> > CONFIG_SENSORS_ADCXX=m
> > # CONFIG_SENSORS_ADM1021 is not set
> > CONFIG_SENSORS_ADM1025=m
> > CONFIG_SENSORS_ADM1026=m
> > CONFIG_SENSORS_ADM1029=m
> > # CONFIG_SENSORS_ADM1031 is not set
> > CONFIG_SENSORS_ADM9240=m
> > CONFIG_SENSORS_ADT7410=m
> > # CONFIG_SENSORS_ADT7411 is not set
> > CONFIG_SENSORS_ADT7462=m
> > # CONFIG_SENSORS_ADT7470 is not set
> > # CONFIG_SENSORS_ADT7475 is not set
> > # CONFIG_SENSORS_ASC7621 is not set
> > # CONFIG_SENSORS_ASB100 is not set
> > CONFIG_SENSORS_ATXP1=m
> > CONFIG_SENSORS_DS620=m
> > # CONFIG_SENSORS_DS1621 is not set
> > CONFIG_SENSORS_DA9052_ADC=m
> > # CONFIG_SENSORS_F71805F is not set
> > # CONFIG_SENSORS_F71882FG is not set
> > CONFIG_SENSORS_F75375S=m
> > CONFIG_SENSORS_FSCHMD=m
> > CONFIG_SENSORS_G760A=m
> > CONFIG_SENSORS_GL518SM=m
> > # CONFIG_SENSORS_GL520SM is not set
> > CONFIG_SENSORS_HIH6130=m
> > CONFIG_SENSORS_IBMAEM=m
> > # CONFIG_SENSORS_IBMPEX is not set
> > # CONFIG_SENSORS_IT87 is not set
> > CONFIG_SENSORS_JC42=m
> > CONFIG_SENSORS_LINEAGE=m
> > CONFIG_SENSORS_LM63=m
> > # CONFIG_SENSORS_LM70 is not set
> > CONFIG_SENSORS_LM73=m
> > CONFIG_SENSORS_LM75=m
> > # CONFIG_SENSORS_LM77 is not set
> > CONFIG_SENSORS_LM78=m
> > # CONFIG_SENSORS_LM80 is not set
> > CONFIG_SENSORS_LM83=m
> > CONFIG_SENSORS_LM85=m
> > CONFIG_SENSORS_LM87=m
> > CONFIG_SENSORS_LM90=m
> > # CONFIG_SENSORS_LM92 is not set
> > CONFIG_SENSORS_LM93=m
> > # CONFIG_SENSORS_LTC4151 is not set
> > CONFIG_SENSORS_LTC4215=m
> > CONFIG_SENSORS_LTC4245=m
> > CONFIG_SENSORS_LTC4261=m
> > # CONFIG_SENSORS_LM95241 is not set
> > CONFIG_SENSORS_LM95245=m
> > # CONFIG_SENSORS_MAX1111 is not set
> > # CONFIG_SENSORS_MAX16065 is not set
> > # CONFIG_SENSORS_MAX1619 is not set
> > # CONFIG_SENSORS_MAX1668 is not set
> > # CONFIG_SENSORS_MAX197 is not set
> > CONFIG_SENSORS_MAX6639=m
> > # CONFIG_SENSORS_MAX6642 is not set
> > CONFIG_SENSORS_MAX6650=m
> > CONFIG_SENSORS_MCP3021=m
> > # CONFIG_SENSORS_NTC_THERMISTOR is not set
> > CONFIG_SENSORS_PC87360=m
> > # CONFIG_SENSORS_PC87427 is not set
> > # CONFIG_SENSORS_PCF8591 is not set
> > # CONFIG_PMBUS is not set
> > CONFIG_SENSORS_SHT21=m
> > # CONFIG_SENSORS_SMM665 is not set
> > CONFIG_SENSORS_DME1737=m
> > CONFIG_SENSORS_EMC1403=m
> > CONFIG_SENSORS_EMC2103=m
> > CONFIG_SENSORS_EMC6W201=m
> > CONFIG_SENSORS_SMSC47M1=m
> > # CONFIG_SENSORS_SMSC47M192 is not set
> > CONFIG_SENSORS_SMSC47B397=m
> > # CONFIG_SENSORS_SCH56XX_COMMON is not set
> > # CONFIG_SENSORS_SCH5627 is not set
> > # CONFIG_SENSORS_SCH5636 is not set
> > CONFIG_SENSORS_ADS1015=m
> > # CONFIG_SENSORS_ADS7828 is not set
> > # CONFIG_SENSORS_ADS7871 is not set
> > CONFIG_SENSORS_AMC6821=m
> > # CONFIG_SENSORS_INA2XX is not set
> > # CONFIG_SENSORS_THMC50 is not set
> > # CONFIG_SENSORS_TMP102 is not set
> > # CONFIG_SENSORS_TMP401 is not set
> > # CONFIG_SENSORS_TMP421 is not set
> > CONFIG_SENSORS_VIA_CPUTEMP=m
> > # CONFIG_SENSORS_VT1211 is not set
> > # CONFIG_SENSORS_W83781D is not set
> > CONFIG_SENSORS_W83791D=m
> > # CONFIG_SENSORS_W83792D is not set
> > CONFIG_SENSORS_W83793=m
> > CONFIG_SENSORS_W83795=m
> > # CONFIG_SENSORS_W83795_FANCTRL is not set
> > CONFIG_SENSORS_W83L785TS=m
> > # CONFIG_SENSORS_W83L786NG is not set
> > CONFIG_SENSORS_W83627HF=m
> > CONFIG_SENSORS_W83627EHF=m
> > # CONFIG_SENSORS_APPLESMC is not set
> > # CONFIG_SENSORS_MC13783_ADC is not set
> > CONFIG_THERMAL=m
> > CONFIG_THERMAL_HWMON=y
> > # CONFIG_CPU_THERMAL is not set
> > CONFIG_WATCHDOG=y
> > CONFIG_WATCHDOG_CORE=y
> > # CONFIG_WATCHDOG_NOWAYOUT is not set
> > 
> > #
> > # Watchdog Device Drivers
> > #
> > # CONFIG_SOFT_WATCHDOG is not set
> > CONFIG_DA9052_WATCHDOG=m
> > # CONFIG_ACQUIRE_WDT is not set
> > # CONFIG_ADVANTECH_WDT is not set
> > CONFIG_F71808E_WDT=m
> > CONFIG_SC520_WDT=m
> > # CONFIG_SBC_FITPC2_WATCHDOG is not set
> > CONFIG_EUROTECH_WDT=m
> > CONFIG_IB700_WDT=m
> > CONFIG_IBMASR=m
> > CONFIG_WAFER_WDT=m
> > CONFIG_IT8712F_WDT=m
> > # CONFIG_IT87_WDT is not set
> > # CONFIG_SC1200_WDT is not set
> > CONFIG_PC87413_WDT=m
> > CONFIG_60XX_WDT=m
> > # CONFIG_SBC8360_WDT is not set
> > # CONFIG_CPU5_WDT is not set
> > # CONFIG_SMSC_SCH311X_WDT is not set
> > CONFIG_SMSC37B787_WDT=m
> > CONFIG_W83627HF_WDT=m
> > CONFIG_W83697HF_WDT=m
> > # CONFIG_W83697UG_WDT is not set
> > CONFIG_W83877F_WDT=m
> > CONFIG_W83977F_WDT=m
> > CONFIG_MACHZ_WDT=m
> > # CONFIG_SBC_EPX_C3_WATCHDOG is not set
> > CONFIG_SSB_POSSIBLE=y
> > 
> > #
> > # Sonics Silicon Backplane
> > #
> > CONFIG_SSB=m
> > CONFIG_SSB_DEBUG=y
> > CONFIG_BCMA_POSSIBLE=y
> > 
> > #
> > # Broadcom specific AMBA
> > #
> > CONFIG_BCMA=m
> > CONFIG_BCMA_DRIVER_GMAC_CMN=y
> > # CONFIG_BCMA_DEBUG is not set
> > 
> > #
> > # Multifunction device drivers
> > #
> > CONFIG_MFD_CORE=y
> > CONFIG_MFD_SM501=m
> > CONFIG_HTC_PASIC3=m
> > # CONFIG_MFD_LM3533 is not set
> > CONFIG_TPS6105X=m
> > CONFIG_TPS6507X=m
> > CONFIG_MFD_TPS65217=m
> > CONFIG_MFD_STMPE=y
> > 
> > #
> > # STMPE Interface Drivers
> > #
> > CONFIG_STMPE_SPI=y
> > # CONFIG_MFD_TMIO is not set
> > CONFIG_PMIC_DA9052=y
> > CONFIG_MFD_DA9052_SPI=y
> > CONFIG_MFD_ARIZONA=y
> > # CONFIG_MFD_ARIZONA_I2C is not set
> > CONFIG_MFD_ARIZONA_SPI=m
> > CONFIG_MFD_WM5102=y
> > # CONFIG_MFD_WM5110 is not set
> > # CONFIG_MFD_WM831X_SPI is not set
> > CONFIG_MFD_PCF50633=m
> > CONFIG_PCF50633_ADC=m
> > CONFIG_PCF50633_GPIO=m
> > CONFIG_MFD_MC13783=m
> > CONFIG_MFD_MC13XXX=m
> > CONFIG_MFD_MC13XXX_SPI=m
> > # CONFIG_MFD_MC13XXX_I2C is not set
> > # CONFIG_ABX500_CORE is not set
> > CONFIG_EZX_PCAP=y
> > CONFIG_MFD_WL1273_CORE=m
> > CONFIG_REGULATOR=y
> > # CONFIG_REGULATOR_DEBUG is not set
> > # CONFIG_REGULATOR_DUMMY is not set
> > CONFIG_REGULATOR_FIXED_VOLTAGE=m
> > # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
> > CONFIG_REGULATOR_USERSPACE_CONSUMER=m
> > CONFIG_REGULATOR_AD5398=m
> > CONFIG_REGULATOR_ARIZONA=m
> > CONFIG_REGULATOR_DA9052=m
> > CONFIG_REGULATOR_FAN53555=m
> > CONFIG_REGULATOR_MC13XXX_CORE=m
> > CONFIG_REGULATOR_MC13783=m
> > # CONFIG_REGULATOR_MC13892 is not set
> > CONFIG_REGULATOR_ISL6271A=m
> > CONFIG_REGULATOR_MAX1586=m
> > # CONFIG_REGULATOR_MAX8649 is not set
> > CONFIG_REGULATOR_MAX8660=m
> > CONFIG_REGULATOR_MAX8952=m
> > # CONFIG_REGULATOR_PCAP is not set
> > CONFIG_REGULATOR_LP3971=m
> > # CONFIG_REGULATOR_LP3972 is not set
> > # CONFIG_REGULATOR_PCF50633 is not set
> > # CONFIG_REGULATOR_TPS6105X is not set
> > CONFIG_REGULATOR_TPS62360=m
> > # CONFIG_REGULATOR_TPS65023 is not set
> > CONFIG_REGULATOR_TPS6507X=m
> > # CONFIG_REGULATOR_TPS65217 is not set
> > # CONFIG_REGULATOR_TPS6524X is not set
> > CONFIG_MEDIA_SUPPORT=m
> > 
> > #
> > # Multimedia core support
> > #
> > # CONFIG_MEDIA_CAMERA_SUPPORT is not set
> > CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
> > # CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
> > CONFIG_MEDIA_RADIO_SUPPORT=y
> > # CONFIG_MEDIA_RC_SUPPORT is not set
> > CONFIG_VIDEO_DEV=m
> > CONFIG_VIDEO_V4L2=m
> > CONFIG_VIDEO_ADV_DEBUG=y
> > # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
> > 
> > #
> > # Media drivers
> > #
> > 
> > #
> > # Supported MMC/SDIO adapters
> > #
> > CONFIG_RADIO_ADAPTERS=y
> > CONFIG_RADIO_SI470X=y
> > CONFIG_I2C_SI470X=m
> > CONFIG_I2C_SI4713=m
> > CONFIG_RADIO_SI4713=m
> > # CONFIG_RADIO_TEA5764 is not set
> > CONFIG_RADIO_SAA7706H=m
> > # CONFIG_RADIO_TEF6862 is not set
> > # CONFIG_RADIO_WL1273 is not set
> > 
> > #
> > # Texas Instruments WL128x FM driver (ST based)
> > #
> > # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
> > 
> > #
> > # Media ancillary drivers (tuners, sensors, i2c, frontends)
> > #
> > 
> > #
> > # Encoders, decoders, sensors and other helper chips
> > #
> > 
> > #
> > # Audio decoders, processors and mixers
> > #
> > CONFIG_VIDEO_TVAUDIO=m
> > # CONFIG_VIDEO_TDA7432 is not set
> > # CONFIG_VIDEO_TDA9840 is not set
> > # CONFIG_VIDEO_TEA6415C is not set
> > # CONFIG_VIDEO_TEA6420 is not set
> > # CONFIG_VIDEO_MSP3400 is not set
> > CONFIG_VIDEO_CS5345=m
> > CONFIG_VIDEO_CS53L32A=m
> > CONFIG_VIDEO_TLV320AIC23B=m
> > # CONFIG_VIDEO_WM8775 is not set
> > CONFIG_VIDEO_WM8739=m
> > # CONFIG_VIDEO_VP27SMPX is not set
> > 
> > #
> > # RDS decoders
> > #
> > CONFIG_VIDEO_SAA6588=m
> > 
> > #
> > # Video decoders
> > #
> > CONFIG_VIDEO_ADV7180=m
> > # CONFIG_VIDEO_ADV7183 is not set
> > # CONFIG_VIDEO_BT819 is not set
> > CONFIG_VIDEO_BT856=m
> > CONFIG_VIDEO_BT866=m
> > CONFIG_VIDEO_KS0127=m
> > # CONFIG_VIDEO_SAA7110 is not set
> > # CONFIG_VIDEO_SAA711X is not set
> > # CONFIG_VIDEO_SAA7191 is not set
> > # CONFIG_VIDEO_TVP514X is not set
> > # CONFIG_VIDEO_TVP5150 is not set
> > CONFIG_VIDEO_TVP7002=m
> > CONFIG_VIDEO_VPX3220=m
> > 
> > #
> > # Video and audio decoders
> > #
> > CONFIG_VIDEO_SAA717X=m
> > CONFIG_VIDEO_CX25840=m
> > 
> > #
> > # MPEG video encoders
> > #
> > CONFIG_VIDEO_CX2341X=m
> > 
> > #
> > # Video encoders
> > #
> > # CONFIG_VIDEO_SAA7127 is not set
> > # CONFIG_VIDEO_SAA7185 is not set
> > CONFIG_VIDEO_ADV7170=m
> > CONFIG_VIDEO_ADV7175=m
> > CONFIG_VIDEO_ADV7343=m
> > CONFIG_VIDEO_ADV7393=m
> > # CONFIG_VIDEO_AK881X is not set
> > 
> > #
> > # Camera sensor devices
> > #
> > 
> > #
> > # Flash devices
> > #
> > 
> > #
> > # Video improvement chips
> > #
> > CONFIG_VIDEO_UPD64031A=m
> > # CONFIG_VIDEO_UPD64083 is not set
> > 
> > #
> > # Miscelaneous helper chips
> > #
> > # CONFIG_VIDEO_THS7303 is not set
> > # CONFIG_VIDEO_M52790 is not set
> > 
> > #
> > # Sensors used on soc_camera driver
> > #
> > # CONFIG_MEDIA_ATTACH is not set
> > CONFIG_MEDIA_TUNER=m
> > 
> > #
> > # Customize TV tuners
> > #
> > # CONFIG_MEDIA_TUNER_SIMPLE is not set
> > # CONFIG_MEDIA_TUNER_TDA8290 is not set
> > CONFIG_MEDIA_TUNER_TDA827X=m
> > CONFIG_MEDIA_TUNER_TDA18271=m
> > CONFIG_MEDIA_TUNER_TDA9887=m
> > CONFIG_MEDIA_TUNER_TEA5761=m
> > CONFIG_MEDIA_TUNER_TEA5767=m
> > CONFIG_MEDIA_TUNER_MT20XX=m
> > CONFIG_MEDIA_TUNER_MT2060=m
> > # CONFIG_MEDIA_TUNER_MT2063 is not set
> > CONFIG_MEDIA_TUNER_MT2266=m
> > CONFIG_MEDIA_TUNER_MT2131=m
> > CONFIG_MEDIA_TUNER_QT1010=m
> > # CONFIG_MEDIA_TUNER_XC2028 is not set
> > CONFIG_MEDIA_TUNER_XC5000=m
> > CONFIG_MEDIA_TUNER_XC4000=m
> > # CONFIG_MEDIA_TUNER_MXL5005S is not set
> > CONFIG_MEDIA_TUNER_MXL5007T=m
> > # CONFIG_MEDIA_TUNER_MC44S803 is not set
> > # CONFIG_MEDIA_TUNER_MAX2165 is not set
> > # CONFIG_MEDIA_TUNER_TDA18218 is not set
> > CONFIG_MEDIA_TUNER_FC0011=m
> > CONFIG_MEDIA_TUNER_FC0012=m
> > CONFIG_MEDIA_TUNER_FC0013=m
> > # CONFIG_MEDIA_TUNER_TDA18212 is not set
> > CONFIG_MEDIA_TUNER_E4000=m
> > # CONFIG_MEDIA_TUNER_FC2580 is not set
> > # CONFIG_MEDIA_TUNER_TUA9001 is not set
> > 
> > #
> > # Customise DVB Frontends
> > #
> > # CONFIG_DVB_AU8522_V4L is not set
> > CONFIG_DVB_TUNER_DIB0070=m
> > CONFIG_DVB_TUNER_DIB0090=m
> > 
> > #
> > # Tools to develop new frontends
> > #
> > CONFIG_DVB_DUMMY_FE=m
> > 
> > #
> > # Graphics support
> > #
> > CONFIG_DRM=m
> > # CONFIG_VGASTATE is not set
> > # CONFIG_VIDEO_OUTPUT_CONTROL is not set
> > # CONFIG_FB is not set
> > # CONFIG_EXYNOS_VIDEO is not set
> > CONFIG_BACKLIGHT_LCD_SUPPORT=y
> > CONFIG_LCD_CLASS_DEVICE=m
> > CONFIG_LCD_LTV350QV=m
> > CONFIG_LCD_ILI9320=m
> > CONFIG_LCD_TDO24M=m
> > CONFIG_LCD_VGG2432A4=m
> > CONFIG_LCD_PLATFORM=m
> > CONFIG_LCD_S6E63M0=m
> > CONFIG_LCD_LD9040=m
> > CONFIG_LCD_AMS369FG06=m
> > CONFIG_BACKLIGHT_CLASS_DEVICE=m
> > CONFIG_BACKLIGHT_GENERIC=m
> > CONFIG_BACKLIGHT_DA9052=m
> > # CONFIG_BACKLIGHT_SAHARA is not set
> > # CONFIG_BACKLIGHT_ADP8860 is not set
> > CONFIG_BACKLIGHT_ADP8870=m
> > # CONFIG_BACKLIGHT_PCF50633 is not set
> > # CONFIG_BACKLIGHT_LM3630 is not set
> > # CONFIG_BACKLIGHT_LM3639 is not set
> > CONFIG_BACKLIGHT_LP855X=m
> > CONFIG_BACKLIGHT_TPS65217=m
> > 
> > #
> > # Console display driver support
> > #
> > CONFIG_VGA_CONSOLE=y
> > CONFIG_VGACON_SOFT_SCROLLBACK=y
> > CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> > CONFIG_DUMMY_CONSOLE=y
> > CONFIG_SOUND=m
> > # CONFIG_SOUND_OSS_CORE is not set
> > # CONFIG_SND is not set
> > # CONFIG_SOUND_PRIME is not set
> > 
> > #
> > # HID support
> > #
> > # CONFIG_HID is not set
> > # CONFIG_USB_ARCH_HAS_OHCI is not set
> > # CONFIG_USB_ARCH_HAS_EHCI is not set
> > # CONFIG_USB_ARCH_HAS_XHCI is not set
> > CONFIG_USB_SUPPORT=y
> > # CONFIG_USB_ARCH_HAS_HCD is not set
> > CONFIG_USB_HCD_BCMA=m
> > CONFIG_USB_HCD_SSB=m
> > 
> > #
> > # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> > #
> > # CONFIG_USB_EZUSB_FX2 is not set
> > # CONFIG_OMAP_USB2 is not set
> > # CONFIG_USB_GADGET is not set
> > 
> > #
> > # OTG and related infrastructure
> > #
> > # CONFIG_MMC is not set
> > CONFIG_MEMSTICK=m
> > # CONFIG_MEMSTICK_DEBUG is not set
> > 
> > #
> > # MemoryStick drivers
> > #
> > CONFIG_MEMSTICK_UNSAFE_RESUME=y
> > # CONFIG_MSPRO_BLOCK is not set
> > 
> > #
> > # MemoryStick Host Controller Drivers
> > #
> > CONFIG_NEW_LEDS=y
> > CONFIG_LEDS_CLASS=m
> > 
> > #
> > # LED drivers
> > #
> > # CONFIG_LEDS_LM3530 is not set
> > # CONFIG_LEDS_LM3642 is not set
> > CONFIG_LEDS_PCA9532=m
> > CONFIG_LEDS_LP3944=m
> > # CONFIG_LEDS_LP5521 is not set
> > # CONFIG_LEDS_LP5523 is not set
> > CONFIG_LEDS_CLEVO_MAIL=m
> > CONFIG_LEDS_PCA955X=m
> > CONFIG_LEDS_PCA9633=m
> > # CONFIG_LEDS_DA9052 is not set
> > # CONFIG_LEDS_DAC124S085 is not set
> > CONFIG_LEDS_REGULATOR=m
> > CONFIG_LEDS_BD2802=m
> > CONFIG_LEDS_MC13783=m
> > CONFIG_LEDS_TCA6507=m
> > CONFIG_LEDS_LM355x=m
> > CONFIG_LEDS_OT200=m
> > CONFIG_LEDS_BLINKM=m
> > # CONFIG_LEDS_TRIGGERS is not set
> > 
> > #
> > # LED Triggers
> > #
> > # CONFIG_ACCESSIBILITY is not set
> > CONFIG_EDAC=y
> > 
> > #
> > # Reporting subsystems
> > #
> > # CONFIG_EDAC_LEGACY_SYSFS is not set
> > CONFIG_EDAC_DEBUG=y
> > # CONFIG_EDAC_MM_EDAC is not set
> > CONFIG_RTC_LIB=y
> > CONFIG_RTC_CLASS=y
> > CONFIG_RTC_HCTOSYS=y
> > CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
> > CONFIG_RTC_DEBUG=y
> > 
> > #
> > # RTC interfaces
> > #
> > CONFIG_RTC_INTF_SYSFS=y
> > # CONFIG_RTC_INTF_PROC is not set
> > # CONFIG_RTC_INTF_DEV is not set
> > # CONFIG_RTC_DRV_TEST is not set
> > 
> > #
> > # I2C RTC drivers
> > #
> > CONFIG_RTC_DRV_DS1307=m
> > CONFIG_RTC_DRV_DS1374=m
> > CONFIG_RTC_DRV_DS1672=m
> > CONFIG_RTC_DRV_DS3232=m
> > # CONFIG_RTC_DRV_MAX6900 is not set
> > CONFIG_RTC_DRV_RS5C372=m
> > # CONFIG_RTC_DRV_ISL1208 is not set
> > # CONFIG_RTC_DRV_ISL12022 is not set
> > CONFIG_RTC_DRV_X1205=m
> > # CONFIG_RTC_DRV_PCF8563 is not set
> > # CONFIG_RTC_DRV_PCF8583 is not set
> > CONFIG_RTC_DRV_M41T80=m
> > CONFIG_RTC_DRV_M41T80_WDT=y
> > # CONFIG_RTC_DRV_BQ32K is not set
> > # CONFIG_RTC_DRV_S35390A is not set
> > CONFIG_RTC_DRV_FM3130=m
> > CONFIG_RTC_DRV_RX8581=m
> > CONFIG_RTC_DRV_RX8025=m
> > # CONFIG_RTC_DRV_EM3027 is not set
> > # CONFIG_RTC_DRV_RV3029C2 is not set
> > 
> > #
> > # SPI RTC drivers
> > #
> > CONFIG_RTC_DRV_M41T93=m
> > # CONFIG_RTC_DRV_M41T94 is not set
> > CONFIG_RTC_DRV_DS1305=m
> > CONFIG_RTC_DRV_DS1390=m
> > # CONFIG_RTC_DRV_MAX6902 is not set
> > CONFIG_RTC_DRV_R9701=m
> > # CONFIG_RTC_DRV_RS5C348 is not set
> > CONFIG_RTC_DRV_DS3234=m
> > # CONFIG_RTC_DRV_PCF2123 is not set
> > 
> > #
> > # Platform RTC drivers
> > #
> > CONFIG_RTC_DRV_CMOS=m
> > # CONFIG_RTC_DRV_DS1286 is not set
> > # CONFIG_RTC_DRV_DS1511 is not set
> > # CONFIG_RTC_DRV_DS1553 is not set
> > CONFIG_RTC_DRV_DS1742=m
> > CONFIG_RTC_DRV_DA9052=m
> > # CONFIG_RTC_DRV_STK17TA8 is not set
> > # CONFIG_RTC_DRV_M48T86 is not set
> > # CONFIG_RTC_DRV_M48T35 is not set
> > # CONFIG_RTC_DRV_M48T59 is not set
> > CONFIG_RTC_DRV_MSM6242=m
> > CONFIG_RTC_DRV_BQ4802=m
> > CONFIG_RTC_DRV_RP5C01=m
> > # CONFIG_RTC_DRV_V3020 is not set
> > # CONFIG_RTC_DRV_DS2404 is not set
> > CONFIG_RTC_DRV_PCF50633=m
> > 
> > #
> > # on-CPU RTC drivers
> > #
> > CONFIG_RTC_DRV_PCAP=m
> > CONFIG_RTC_DRV_MC13XXX=m
> > CONFIG_DMADEVICES=y
> > # CONFIG_DMADEVICES_DEBUG is not set
> > 
> > #
> > # DMA Devices
> > #
> > CONFIG_TIMB_DMA=m
> > CONFIG_DMA_ENGINE=y
> > 
> > #
> > # DMA Clients
> > #
> > CONFIG_ASYNC_TX_DMA=y
> > CONFIG_DMATEST=m
> > CONFIG_AUXDISPLAY=y
> > CONFIG_UIO=m
> > # CONFIG_UIO_PDRV is not set
> > CONFIG_UIO_PDRV_GENIRQ=m
> > CONFIG_VIRTIO=m
> > 
> > #
> > # Virtio drivers
> > #
> > CONFIG_VIRTIO_BALLOON=m
> > CONFIG_VIRTIO_MMIO=m
> > CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
> > 
> > #
> > # Microsoft Hyper-V guest support
> > #
> > CONFIG_STAGING=y
> > # CONFIG_ECHO is not set
> > CONFIG_COMEDI=m
> > CONFIG_COMEDI_DEBUG=y
> > CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
> > CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
> > CONFIG_COMEDI_MISC_DRIVERS=y
> > CONFIG_COMEDI_KCOMEDILIB=m
> > # CONFIG_COMEDI_BOND is not set
> > CONFIG_COMEDI_TEST=m
> > CONFIG_COMEDI_PARPORT=m
> > CONFIG_COMEDI_SERIAL2002=m
> > CONFIG_COMEDI_SKEL=m
> > # CONFIG_COMEDI_8255 is not set
> > CONFIG_COMEDI_FC=m
> > # CONFIG_ZSMALLOC is not set
> > # CONFIG_FT1000 is not set
> > 
> > #
> > # Speakup console speech
> > #
> > CONFIG_SPEAKUP=m
> > # CONFIG_SPEAKUP_SYNTH_ACNTSA is not set
> > # CONFIG_SPEAKUP_SYNTH_ACNTPC is not set
> > CONFIG_SPEAKUP_SYNTH_APOLLO=m
> > CONFIG_SPEAKUP_SYNTH_AUDPTR=m
> > CONFIG_SPEAKUP_SYNTH_BNS=m
> > # CONFIG_SPEAKUP_SYNTH_DECTLK is not set
> > CONFIG_SPEAKUP_SYNTH_DECEXT=m
> > CONFIG_SPEAKUP_SYNTH_DECPC=m
> > # CONFIG_SPEAKUP_SYNTH_DTLK is not set
> > CONFIG_SPEAKUP_SYNTH_KEYPC=m
> > CONFIG_SPEAKUP_SYNTH_LTLK=m
> > CONFIG_SPEAKUP_SYNTH_SOFT=m
> > CONFIG_SPEAKUP_SYNTH_SPKOUT=m
> > CONFIG_SPEAKUP_SYNTH_TXPRT=m
> > CONFIG_SPEAKUP_SYNTH_DUMMY=m
> > # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
> > # CONFIG_STAGING_MEDIA is not set
> > 
> > #
> > # Android
> > #
> > # CONFIG_ANDROID is not set
> > CONFIG_PHONE=m
> > CONFIG_IPACK_BUS=m
> > # CONFIG_SERIAL_IPOCTAL is not set
> > CONFIG_DGRP=m
> > CONFIG_X86_PLATFORM_DEVICES=y
> > CONFIG_SENSORS_HDAPS=m
> > CONFIG_SAMSUNG_LAPTOP=m
> > CONFIG_SAMSUNG_Q10=m
> > 
> > #
> > # Hardware Spinlock drivers
> > #
> > CONFIG_CLKEVT_I8253=y
> > CONFIG_I8253_LOCK=y
> > CONFIG_CLKBLD_I8253=y
> > # CONFIG_IOMMU_SUPPORT is not set
> > 
> > #
> > # Remoteproc drivers (EXPERIMENTAL)
> > #
> > # CONFIG_STE_MODEM_RPROC is not set
> > 
> > #
> > # Rpmsg drivers (EXPERIMENTAL)
> > #
> > # CONFIG_VIRT_DRIVERS is not set
> > # CONFIG_PM_DEVFREQ is not set
> > CONFIG_EXTCON=y
> > 
> > #
> > # Extcon Device Drivers
> > #
> > CONFIG_EXTCON_ARIZONA=m
> > # CONFIG_MEMORY is not set
> > # CONFIG_IIO is not set
> > # CONFIG_PWM is not set
> > 
> > #
> > # Firmware Drivers
> > #
> > CONFIG_EDD=m
> > CONFIG_EDD_OFF=y
> > CONFIG_FIRMWARE_MEMMAP=y
> > CONFIG_DELL_RBU=m
> > # CONFIG_DCDBAS is not set
> > # CONFIG_DMIID is not set
> > # CONFIG_DMI_SYSFS is not set
> > # CONFIG_ISCSI_IBFT_FIND is not set
> > # CONFIG_GOOGLE_FIRMWARE is not set
> > 
> > #
> > # File systems
> > #
> > CONFIG_DCACHE_WORD_ACCESS=y
> > CONFIG_EXT2_FS=m
> > CONFIG_EXT2_FS_XATTR=y
> > CONFIG_EXT2_FS_POSIX_ACL=y
> > CONFIG_EXT2_FS_SECURITY=y
> > CONFIG_EXT2_FS_XIP=y
> > CONFIG_EXT3_FS=m
> > CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
> > # CONFIG_EXT3_FS_XATTR is not set
> > # CONFIG_EXT4_FS is not set
> > CONFIG_FS_XIP=y
> > CONFIG_JBD=m
> > CONFIG_JBD_DEBUG=y
> > CONFIG_FS_MBCACHE=m
> > # CONFIG_REISERFS_FS is not set
> > CONFIG_JFS_FS=m
> > CONFIG_JFS_POSIX_ACL=y
> > CONFIG_JFS_SECURITY=y
> > # CONFIG_JFS_DEBUG is not set
> > # CONFIG_JFS_STATISTICS is not set
> > CONFIG_XFS_FS=m
> > CONFIG_XFS_QUOTA=y
> > CONFIG_XFS_POSIX_ACL=y
> > CONFIG_XFS_RT=y
> > # CONFIG_XFS_DEBUG is not set
> > # CONFIG_GFS2_FS is not set
> > CONFIG_BTRFS_FS=m
> > # CONFIG_BTRFS_FS_POSIX_ACL is not set
> > # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
> > CONFIG_NILFS2_FS=m
> > CONFIG_FS_POSIX_ACL=y
> > CONFIG_EXPORTFS=y
> > CONFIG_FILE_LOCKING=y
> > # CONFIG_FSNOTIFY is not set
> > # CONFIG_DNOTIFY is not set
> > # CONFIG_INOTIFY_USER is not set
> > # CONFIG_FANOTIFY is not set
> > CONFIG_QUOTA=y
> > CONFIG_PRINT_QUOTA_WARNING=y
> > # CONFIG_QUOTA_DEBUG is not set
> > CONFIG_QFMT_V1=m
> > # CONFIG_QFMT_V2 is not set
> > CONFIG_QUOTACTL=y
> > # CONFIG_AUTOFS4_FS is not set
> > # CONFIG_FUSE_FS is not set
> > 
> > #
> > # Caches
> > #
> > # CONFIG_FSCACHE is not set
> > 
> > #
> > # CD-ROM/DVD Filesystems
> > #
> > # CONFIG_ISO9660_FS is not set
> > CONFIG_UDF_FS=m
> > CONFIG_UDF_NLS=y
> > 
> > #
> > # DOS/FAT/NT Filesystems
> > #
> > CONFIG_FAT_FS=m
> > # CONFIG_MSDOS_FS is not set
> > CONFIG_VFAT_FS=m
> > CONFIG_FAT_DEFAULT_CODEPAGE=437
> > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> > CONFIG_NTFS_FS=m
> > # CONFIG_NTFS_DEBUG is not set
> > CONFIG_NTFS_RW=y
> > 
> > #
> > # Pseudo filesystems
> > #
> > CONFIG_PROC_FS=y
> > # CONFIG_PROC_KCORE is not set
> > CONFIG_PROC_VMCORE=y
> > CONFIG_PROC_SYSCTL=y
> > CONFIG_PROC_PAGE_MONITOR=y
> > CONFIG_SYSFS=y
> > CONFIG_TMPFS=y
> > # CONFIG_TMPFS_POSIX_ACL is not set
> > # CONFIG_TMPFS_XATTR is not set
> > # CONFIG_HUGETLBFS is not set
> > # CONFIG_HUGETLB_PAGE is not set
> > CONFIG_CONFIGFS_FS=m
> > CONFIG_MISC_FILESYSTEMS=y
> > CONFIG_ADFS_FS=m
> > # CONFIG_ADFS_FS_RW is not set
> > CONFIG_AFFS_FS=m
> > CONFIG_ECRYPT_FS=m
> > # CONFIG_HFS_FS is not set
> > # CONFIG_HFSPLUS_FS is not set
> > # CONFIG_BEFS_FS is not set
> > CONFIG_BFS_FS=m
> > CONFIG_EFS_FS=m
> > # CONFIG_JFFS2_FS is not set
> > # CONFIG_LOGFS is not set
> > CONFIG_CRAMFS=m
> > CONFIG_SQUASHFS=m
> > CONFIG_SQUASHFS_XATTR=y
> > # CONFIG_SQUASHFS_ZLIB is not set
> > CONFIG_SQUASHFS_LZO=y
> > CONFIG_SQUASHFS_XZ=y
> > CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
> > # CONFIG_SQUASHFS_EMBEDDED is not set
> > CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> > # CONFIG_VXFS_FS is not set
> > CONFIG_MINIX_FS=m
> > CONFIG_OMFS_FS=m
> > # CONFIG_HPFS_FS is not set
> > # CONFIG_QNX4FS_FS is not set
> > # CONFIG_QNX6FS_FS is not set
> > # CONFIG_ROMFS_FS is not set
> > # CONFIG_PSTORE is not set
> > # CONFIG_SYSV_FS is not set
> > # CONFIG_UFS_FS is not set
> > CONFIG_NLS=y
> > CONFIG_NLS_DEFAULT="iso8859-1"
> > # CONFIG_NLS_CODEPAGE_437 is not set
> > CONFIG_NLS_CODEPAGE_737=m
> > CONFIG_NLS_CODEPAGE_775=m
> > # CONFIG_NLS_CODEPAGE_850 is not set
> > CONFIG_NLS_CODEPAGE_852=m
> > # CONFIG_NLS_CODEPAGE_855 is not set
> > # CONFIG_NLS_CODEPAGE_857 is not set
> > CONFIG_NLS_CODEPAGE_860=m
> > CONFIG_NLS_CODEPAGE_861=m
> > # CONFIG_NLS_CODEPAGE_862 is not set
> > CONFIG_NLS_CODEPAGE_863=m
> > CONFIG_NLS_CODEPAGE_864=m
> > CONFIG_NLS_CODEPAGE_865=m
> > CONFIG_NLS_CODEPAGE_866=m
> > CONFIG_NLS_CODEPAGE_869=m
> > # CONFIG_NLS_CODEPAGE_936 is not set
> > CONFIG_NLS_CODEPAGE_950=m
> > CONFIG_NLS_CODEPAGE_932=m
> > CONFIG_NLS_CODEPAGE_949=m
> > # CONFIG_NLS_CODEPAGE_874 is not set
> > CONFIG_NLS_ISO8859_8=m
> > # CONFIG_NLS_CODEPAGE_1250 is not set
> > # CONFIG_NLS_CODEPAGE_1251 is not set
> > # CONFIG_NLS_ASCII is not set
> > # CONFIG_NLS_ISO8859_1 is not set
> > # CONFIG_NLS_ISO8859_2 is not set
> > CONFIG_NLS_ISO8859_3=m
> > CONFIG_NLS_ISO8859_4=m
> > CONFIG_NLS_ISO8859_5=m
> > # CONFIG_NLS_ISO8859_6 is not set
> > # CONFIG_NLS_ISO8859_7 is not set
> > # CONFIG_NLS_ISO8859_9 is not set
> > # CONFIG_NLS_ISO8859_13 is not set
> > CONFIG_NLS_ISO8859_14=m
> > # CONFIG_NLS_ISO8859_15 is not set
> > # CONFIG_NLS_KOI8_R is not set
> > CONFIG_NLS_KOI8_U=m
> > # CONFIG_NLS_MAC_ROMAN is not set
> > # CONFIG_NLS_MAC_CELTIC is not set
> > CONFIG_NLS_MAC_CENTEURO=m
> > CONFIG_NLS_MAC_CROATIAN=m
> > CONFIG_NLS_MAC_CYRILLIC=m
> > CONFIG_NLS_MAC_GAELIC=m
> > # CONFIG_NLS_MAC_GREEK is not set
> > # CONFIG_NLS_MAC_ICELAND is not set
> > # CONFIG_NLS_MAC_INUIT is not set
> > # CONFIG_NLS_MAC_ROMANIAN is not set
> > CONFIG_NLS_MAC_TURKISH=m
> > # CONFIG_NLS_UTF8 is not set
> > 
> > #
> > # Kernel hacking
> > #
> > CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> > # CONFIG_PRINTK_TIME is not set
> > CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
> > # CONFIG_ENABLE_WARN_DEPRECATED is not set
> > # CONFIG_ENABLE_MUST_CHECK is not set
> > CONFIG_FRAME_WARN=2048
> > CONFIG_MAGIC_SYSRQ=y
> > CONFIG_STRIP_ASM_SYMS=y
> > # CONFIG_UNUSED_SYMBOLS is not set
> > CONFIG_DEBUG_FS=y
> > # CONFIG_HEADERS_CHECK is not set
> > # CONFIG_DEBUG_SECTION_MISMATCH is not set
> > # CONFIG_DEBUG_KERNEL is not set
> > # CONFIG_PANIC_ON_OOPS is not set
> > CONFIG_PANIC_ON_OOPS_VALUE=0
> > # CONFIG_SLUB_DEBUG_ON is not set
> > # CONFIG_SLUB_STATS is not set
> > CONFIG_HAVE_DEBUG_KMEMLEAK=y
> > # CONFIG_SPARSE_RCU_POINTER is not set
> > CONFIG_TRACE_IRQFLAGS=y
> > CONFIG_STACKTRACE=y
> > CONFIG_DEBUG_BUGVERBOSE=y
> > CONFIG_DEBUG_MEMORY_INIT=y
> > CONFIG_ARCH_WANT_FRAME_POINTERS=y
> > CONFIG_FRAME_POINTER=y
> > CONFIG_RCU_CPU_STALL_TIMEOUT=60
> > # CONFIG_RCU_CPU_STALL_VERBOSE is not set
> > # CONFIG_LKDTM is not set
> > CONFIG_USER_STACKTRACE_SUPPORT=y
> > CONFIG_NOP_TRACER=y
> > CONFIG_HAVE_FUNCTION_TRACER=y
> > CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> > CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
> > CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> > CONFIG_HAVE_DYNAMIC_FTRACE=y
> > CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> > CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> > CONFIG_HAVE_FENTRY=y
> > CONFIG_HAVE_C_RECORDMCOUNT=y
> > CONFIG_TRACER_MAX_TRACE=y
> > CONFIG_TRACE_CLOCK=y
> > CONFIG_RING_BUFFER=y
> > CONFIG_EVENT_TRACING=y
> > CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
> > CONFIG_CONTEXT_SWITCH_TRACER=y
> > CONFIG_RING_BUFFER_ALLOW_SWAP=y
> > CONFIG_TRACING=y
> > CONFIG_GENERIC_TRACER=y
> > CONFIG_TRACING_SUPPORT=y
> > CONFIG_FTRACE=y
> > # CONFIG_FUNCTION_TRACER is not set
> > CONFIG_IRQSOFF_TRACER=y
> > # CONFIG_PREEMPT_TRACER is not set
> > CONFIG_SCHED_TRACER=y
> > CONFIG_FTRACE_SYSCALLS=y
> > CONFIG_BRANCH_PROFILE_NONE=y
> > # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
> > # CONFIG_PROFILE_ALL_BRANCHES is not set
> > # CONFIG_STACK_TRACER is not set
> > # CONFIG_BLK_DEV_IO_TRACE is not set
> > # CONFIG_UPROBE_EVENT is not set
> > # CONFIG_PROBE_EVENTS is not set
> > # CONFIG_FTRACE_STARTUP_TEST is not set
> > CONFIG_RING_BUFFER_BENCHMARK=m
> > # CONFIG_DYNAMIC_DEBUG is not set
> > CONFIG_DMA_API_DEBUG=y
> > CONFIG_ATOMIC64_SELFTEST=y
> > CONFIG_SAMPLES=y
> > # CONFIG_SAMPLE_TRACEPOINTS is not set
> > # CONFIG_SAMPLE_TRACE_EVENTS is not set
> > # CONFIG_SAMPLE_KOBJECT is not set
> > CONFIG_SAMPLE_HW_BREAKPOINT=m
> > # CONFIG_SAMPLE_KFIFO is not set
> > CONFIG_HAVE_ARCH_KGDB=y
> > CONFIG_HAVE_ARCH_KMEMCHECK=y
> > # CONFIG_TEST_KSTRTOX is not set
> > # CONFIG_STRICT_DEVMEM is not set
> > CONFIG_X86_VERBOSE_BOOTUP=y
> > CONFIG_EARLY_PRINTK=y
> > CONFIG_DEBUG_SET_MODULE_RONX=y
> > CONFIG_IOMMU_STRESS=y
> > CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> > CONFIG_IO_DELAY_TYPE_0X80=0
> > CONFIG_IO_DELAY_TYPE_0XED=1
> > CONFIG_IO_DELAY_TYPE_UDELAY=2
> > CONFIG_IO_DELAY_TYPE_NONE=3
> > CONFIG_IO_DELAY_0X80=y
> > # CONFIG_IO_DELAY_0XED is not set
> > # CONFIG_IO_DELAY_UDELAY is not set
> > # CONFIG_IO_DELAY_NONE is not set
> > CONFIG_DEFAULT_IO_DELAY_TYPE=0
> > # CONFIG_OPTIMIZE_INLINING is not set
> > 
> > #
> > # Security options
> > #
> > CONFIG_KEYS=y
> > CONFIG_TRUSTED_KEYS=m
> > # CONFIG_ENCRYPTED_KEYS is not set
> > # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
> > CONFIG_SECURITY_DMESG_RESTRICT=y
> > CONFIG_SECURITY=y
> > CONFIG_SECURITYFS=y
> > # CONFIG_SECURITY_NETWORK is not set
> > CONFIG_SECURITY_PATH=y
> > CONFIG_SECURITY_YAMA=y
> > # CONFIG_SECURITY_YAMA_STACKED is not set
> > # CONFIG_IMA is not set
> > CONFIG_DEFAULT_SECURITY_YAMA=y
> > # CONFIG_DEFAULT_SECURITY_DAC is not set
> > CONFIG_DEFAULT_SECURITY="yama"
> > CONFIG_CRYPTO=y
> > 
> > #
> > # Crypto core or helper
> > #
> > CONFIG_CRYPTO_ALGAPI=y
> > CONFIG_CRYPTO_ALGAPI2=y
> > CONFIG_CRYPTO_AEAD=m
> > CONFIG_CRYPTO_AEAD2=y
> > CONFIG_CRYPTO_BLKCIPHER=m
> > CONFIG_CRYPTO_BLKCIPHER2=y
> > CONFIG_CRYPTO_HASH=y
> > CONFIG_CRYPTO_HASH2=y
> > CONFIG_CRYPTO_RNG=m
> > CONFIG_CRYPTO_RNG2=y
> > CONFIG_CRYPTO_PCOMP=m
> > CONFIG_CRYPTO_PCOMP2=y
> > CONFIG_CRYPTO_MANAGER=m
> > CONFIG_CRYPTO_MANAGER2=y
> > CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> > CONFIG_CRYPTO_GF128MUL=m
> > CONFIG_CRYPTO_NULL=m
> > CONFIG_CRYPTO_PCRYPT=m
> > CONFIG_CRYPTO_WORKQUEUE=y
> > CONFIG_CRYPTO_CRYPTD=m
> > CONFIG_CRYPTO_AUTHENC=m
> > # CONFIG_CRYPTO_TEST is not set
> > CONFIG_CRYPTO_ABLK_HELPER_X86=m
> > CONFIG_CRYPTO_GLUE_HELPER_X86=m
> > 
> > #
> > # Authenticated Encryption with Associated Data
> > #
> > # CONFIG_CRYPTO_CCM is not set
> > # CONFIG_CRYPTO_GCM is not set
> > CONFIG_CRYPTO_SEQIV=m
> > 
> > #
> > # Block modes
> > #
> > CONFIG_CRYPTO_CBC=m
> > CONFIG_CRYPTO_CTR=m
> > CONFIG_CRYPTO_CTS=m
> > CONFIG_CRYPTO_ECB=m
> > CONFIG_CRYPTO_LRW=m
> > # CONFIG_CRYPTO_PCBC is not set
> > CONFIG_CRYPTO_XTS=m
> > 
> > #
> > # Hash modes
> > #
> > CONFIG_CRYPTO_HMAC=m
> > CONFIG_CRYPTO_XCBC=m
> > # CONFIG_CRYPTO_VMAC is not set
> > 
> > #
> > # Digest
> > #
> > CONFIG_CRYPTO_CRC32C=m
> > # CONFIG_CRYPTO_CRC32C_INTEL is not set
> > # CONFIG_CRYPTO_GHASH is not set
> > # CONFIG_CRYPTO_MD4 is not set
> > CONFIG_CRYPTO_MD5=m
> > # CONFIG_CRYPTO_MICHAEL_MIC is not set
> > # CONFIG_CRYPTO_RMD128 is not set
> > # CONFIG_CRYPTO_RMD160 is not set
> > CONFIG_CRYPTO_RMD256=m
> > # CONFIG_CRYPTO_RMD320 is not set
> > CONFIG_CRYPTO_SHA1=m
> > # CONFIG_CRYPTO_SHA1_SSSE3 is not set
> > CONFIG_CRYPTO_SHA256=m
> > CONFIG_CRYPTO_SHA512=y
> > CONFIG_CRYPTO_TGR192=m
> > # CONFIG_CRYPTO_WP512 is not set
> > CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
> > 
> > #
> > # Ciphers
> > #
> > CONFIG_CRYPTO_AES=m
> > CONFIG_CRYPTO_AES_X86_64=m
> > CONFIG_CRYPTO_AES_NI_INTEL=m
> > CONFIG_CRYPTO_ANUBIS=m
> > # CONFIG_CRYPTO_ARC4 is not set
> > # CONFIG_CRYPTO_BLOWFISH is not set
> > CONFIG_CRYPTO_BLOWFISH_COMMON=m
> > CONFIG_CRYPTO_BLOWFISH_X86_64=m
> > CONFIG_CRYPTO_CAMELLIA=m
> > CONFIG_CRYPTO_CAMELLIA_X86_64=m
> > # CONFIG_CRYPTO_CAST5 is not set
> > # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
> > CONFIG_CRYPTO_CAST6=m
> > CONFIG_CRYPTO_CAST6_AVX_X86_64=m
> > # CONFIG_CRYPTO_DES is not set
> > CONFIG_CRYPTO_FCRYPT=m
> > CONFIG_CRYPTO_KHAZAD=m
> > # CONFIG_CRYPTO_SALSA20 is not set
> > # CONFIG_CRYPTO_SALSA20_X86_64 is not set
> > CONFIG_CRYPTO_SEED=m
> > CONFIG_CRYPTO_SERPENT=m
> > # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
> > # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
> > # CONFIG_CRYPTO_TEA is not set
> > # CONFIG_CRYPTO_TWOFISH is not set
> > # CONFIG_CRYPTO_TWOFISH_X86_64 is not set
> > # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
> > # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
> > 
> > #
> > # Compression
> > #
> > # CONFIG_CRYPTO_DEFLATE is not set
> > CONFIG_CRYPTO_ZLIB=m
> > CONFIG_CRYPTO_LZO=m
> > 
> > #
> > # Random Number Generation
> > #
> > CONFIG_CRYPTO_ANSI_CPRNG=m
> > # CONFIG_CRYPTO_HW is not set
> > CONFIG_ASYMMETRIC_KEY_TYPE=y
> > CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
> > CONFIG_PUBLIC_KEY_ALGO_RSA=y
> > CONFIG_X509_CERTIFICATE_PARSER=y
> > CONFIG_HAVE_KVM=y
> > CONFIG_VIRTUALIZATION=y
> > CONFIG_BINARY_PRINTF=y
> > 
> > #
> > # Library routines
> > #
> > CONFIG_BITREVERSE=m
> > CONFIG_GENERIC_STRNCPY_FROM_USER=y
> > CONFIG_GENERIC_STRNLEN_USER=y
> > CONFIG_GENERIC_FIND_FIRST_BIT=y
> > CONFIG_GENERIC_PCI_IOMAP=y
> > CONFIG_GENERIC_IOMAP=y
> > CONFIG_GENERIC_IO=y
> > # CONFIG_CRC_CCITT is not set
> > CONFIG_CRC16=m
> > CONFIG_CRC_T10DIF=m
> > CONFIG_CRC_ITU_T=m
> > CONFIG_CRC32=m
> > CONFIG_CRC32_SELFTEST=y
> > # CONFIG_CRC32_SLICEBY8 is not set
> > # CONFIG_CRC32_SLICEBY4 is not set
> > # CONFIG_CRC32_SARWATE is not set
> > CONFIG_CRC32_BIT=y
> > # CONFIG_CRC7 is not set
> > CONFIG_LIBCRC32C=m
> > CONFIG_CRC8=m
> > CONFIG_ZLIB_INFLATE=m
> > CONFIG_ZLIB_DEFLATE=m
> > CONFIG_LZO_COMPRESS=y
> > CONFIG_LZO_DECOMPRESS=y
> > CONFIG_XZ_DEC=m
> > CONFIG_XZ_DEC_X86=y
> > CONFIG_XZ_DEC_POWERPC=y
> > CONFIG_XZ_DEC_IA64=y
> > CONFIG_XZ_DEC_ARM=y
> > CONFIG_XZ_DEC_ARMTHUMB=y
> > CONFIG_XZ_DEC_SPARC=y
> > CONFIG_XZ_DEC_BCJ=y
> > CONFIG_XZ_DEC_TEST=m
> > CONFIG_HAS_IOMEM=y
> > CONFIG_HAS_IOPORT=y
> > CONFIG_HAS_DMA=y
> > CONFIG_NLATTR=y
> > CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
> > # CONFIG_AVERAGE is not set
> > CONFIG_CLZ_TAB=y
> > CONFIG_CORDIC=m
> > CONFIG_DDR=y
> > CONFIG_MPILIB=y
> > CONFIG_OID_REGISTRY=y
> > 
> > 
> 


-- 

Re: Kernel panic

[Stefan Beller]

So I tested vanilla v3.6 and v3.5 as well and this panic comes up.
Hence I guess my .config is screwed or the way I install the
kernel.

On 12/02/2012 06:30 PM, Stefan Beller wrote:
> Hello,
> 
> so I tested v3.7-rc7-163-g3c46f3d and got a kernel panic.
> Usually I am running Ubuntu on my Dell Latitutde E6520,
> which usually works fine except some sound issues.
> 
> I did this:
> 
> git clone https://github.com/torvalds/linux.git
> cd linux
> make deb-pkg
> cd ..
> dpkg -i linux-headers-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
> dpkg -i linux-image-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
> dpkg -i linux-libc-dev_3.7.0-rc7+-3_amd64.deb
> 
> Rebooting yields a panic, 
> see panic stack trace and .config below
> 
> How would I help further fixing this issue?
> 
> ---------------------------------
> the screen reads:
> ---------------------------------
> early console in decompress_kernel
> 
> Decompressing Linux... Parsing ELF... done.
> Booting the kernel.
> drivers/rtc/hctosyys.c: unable to open rtc device (rtc0)
> Kernel panic - not syncing: VFS Unable to mount root fs on unknown-block(0,0)
> Pid: 1, com: swapper/0 Not tainted 3.7.0-rc7+ #3
> Call Trace:
>  [<ffffffff8127a2c3>] panic+0x11a/0x2b3
>  [<ffffffff8147d42e>] mount_block_root+0x375/0x39a
>  [<ffffffff8147d4bf>] mount_root+0x6c/0x77
>  [<ffffffff8147d68b>] prepare_namespace+0x1c1/0x203
>  [<ffffffff8106aeb3>] ? release_tgcred.isra.8+0x3c/0x3c
>  [<ffffffff812750b5>] kernel_init+0x2ae/0x433
>  [<ffffffff8147c5f8>] ? loglevel+0x46/0x46
>  [<ffffffff81274e07>] ? rest_init+0xd3/0xd3
>  [<ffffffff812832bc>] ret_from_fork+0x7c/0xb0
>  [<ffffffff81274e07>] ? rest_init+0xd3/0xd3
> 
> ---------------------------------
> .config
> ---------------------------------
> 
> #
> # Automatically generated file; DO NOT EDIT.
> # Linux/x86_64 3.7.0-rc6 Kernel Configuration
> #
> CONFIG_64BIT=y
> CONFIG_X86_64=y
> CONFIG_X86=y
> CONFIG_INSTRUCTION_DECODER=y
> CONFIG_OUTPUT_FORMAT="elf64-x86-64"
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_MMU=y
> CONFIG_NEED_DMA_MAP_STATE=y
> CONFIG_NEED_SG_DMA_LENGTH=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_DEFAULT_IDLE=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
> CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> CONFIG_ZONE_DMA32=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_X86_64_SMP=y
> CONFIG_X86_HT=y
> CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
> CONFIG_ARCH_SUPPORTS_UPROBES=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> CONFIG_CONSTRUCTORS=y
> CONFIG_HAVE_IRQ_WORK=y
> CONFIG_IRQ_WORK=y
> CONFIG_BUILDTIME_EXTABLE_SORT=y
> 
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_CROSS_COMPILE=""
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_HAVE_KERNEL_GZIP=y
> CONFIG_HAVE_KERNEL_BZIP2=y
> CONFIG_HAVE_KERNEL_LZMA=y
> CONFIG_HAVE_KERNEL_XZ=y
> CONFIG_HAVE_KERNEL_LZO=y
> # CONFIG_KERNEL_GZIP is not set
> # CONFIG_KERNEL_BZIP2 is not set
> CONFIG_KERNEL_LZMA=y
> # CONFIG_KERNEL_XZ is not set
> # CONFIG_KERNEL_LZO is not set
> CONFIG_DEFAULT_HOSTNAME="(none)"
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_FHANDLE=y
> CONFIG_HAVE_GENERIC_HARDIRQS=y
> 
> #
> # IRQ subsystem
> #
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_IRQ_SHOW=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_IRQ_DOMAIN=y
> # CONFIG_IRQ_DOMAIN_DEBUG is not set
> CONFIG_IRQ_FORCED_THREADING=y
> CONFIG_SPARSE_IRQ=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_ARCH_CLOCKSOURCE_DATA=y
> CONFIG_GENERIC_TIME_VSYSCALL=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
> CONFIG_GENERIC_CMOS_UPDATE=y
> 
> #
> # Timers subsystem
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> 
> #
> # CPU/Task time and stats accounting
> #
> # CONFIG_TICK_CPU_ACCOUNTING is not set
> CONFIG_IRQ_TIME_ACCOUNTING=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> 
> #
> # RCU Subsystem
> #
> CONFIG_TREE_PREEMPT_RCU=y
> CONFIG_PREEMPT_RCU=y
> # CONFIG_RCU_USER_QS is not set
> CONFIG_RCU_FANOUT=64
> CONFIG_RCU_FANOUT_LEAF=16
> CONFIG_RCU_FANOUT_EXACT=y
> # CONFIG_RCU_FAST_NO_HZ is not set
> # CONFIG_TREE_RCU_TRACE is not set
> CONFIG_RCU_BOOST=y
> CONFIG_RCU_BOOST_PRIO=1
> CONFIG_RCU_BOOST_DELAY=500
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=17
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> # CONFIG_CGROUPS is not set
> # CONFIG_CHECKPOINT_RESTORE is not set
> CONFIG_NAMESPACES=y
> # CONFIG_UTS_NS is not set
> CONFIG_IPC_NS=y
> CONFIG_PID_NS=y
> # CONFIG_SCHED_AUTOGROUP is not set
> CONFIG_SYSFS_DEPRECATED=y
> CONFIG_SYSFS_DEPRECATED_V2=y
> # CONFIG_RELAY is not set
> # CONFIG_BLK_DEV_INITRD is not set
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> CONFIG_ANON_INODES=y
> # CONFIG_EXPERT is not set
> # CONFIG_SYSCTL_SYSCALL is not set
> CONFIG_SYSCTL_EXCEPTION_TRACE=y
> CONFIG_KALLSYMS=y
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_HAVE_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> # CONFIG_EMBEDDED is not set
> CONFIG_HAVE_PERF_EVENTS=y
> 
> #
> # Kernel Performance Events And Counters
> #
> CONFIG_PERF_EVENTS=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_SLUB_DEBUG=y
> CONFIG_COMPAT_BRK=y
> # CONFIG_SLAB is not set
> CONFIG_SLUB=y
> CONFIG_PROFILING=y
> CONFIG_TRACEPOINTS=y
> CONFIG_OPROFILE=m
> # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
> CONFIG_HAVE_OPROFILE=y
> CONFIG_OPROFILE_NMI_TIMER=y
> # CONFIG_KPROBES is not set
> CONFIG_JUMP_LABEL=y
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_OPTPROBES=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_ATTRS=y
> CONFIG_USE_GENERIC_SMP_HELPERS=y
> CONFIG_GENERIC_SMP_IDLE_THREAD=y
> CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> CONFIG_HAVE_DMA_API_DEBUG=y
> CONFIG_HAVE_HW_BREAKPOINT=y
> CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
> CONFIG_HAVE_USER_RETURN_NOTIFIER=y
> CONFIG_HAVE_PERF_EVENTS_NMI=y
> CONFIG_HAVE_PERF_REGS=y
> CONFIG_HAVE_PERF_USER_STACK_DUMP=y
> CONFIG_HAVE_ARCH_JUMP_LABEL=y
> CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
> CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
> CONFIG_HAVE_CMPXCHG_LOCAL=y
> CONFIG_HAVE_CMPXCHG_DOUBLE=y
> CONFIG_GENERIC_KERNEL_THREAD=y
> CONFIG_GENERIC_KERNEL_EXECVE=y
> CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
> CONFIG_HAVE_RCU_USER_QS=y
> CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
> CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
> CONFIG_MODULES_USE_ELF_RELA=y
> 
> #
> # GCOV-based kernel profiling
> #
> CONFIG_GCOV_KERNEL=y
> CONFIG_GCOV_PROFILE_ALL=y
> # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> CONFIG_MODULE_FORCE_LOAD=y
> # CONFIG_MODULE_UNLOAD is not set
> CONFIG_MODVERSIONS=y
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_MODULE_SIG=y
> CONFIG_MODULE_SIG_FORCE=y
> # CONFIG_MODULE_SIG_SHA1 is not set
> # CONFIG_MODULE_SIG_SHA224 is not set
> # CONFIG_MODULE_SIG_SHA256 is not set
> CONFIG_MODULE_SIG_SHA384=y
> # CONFIG_MODULE_SIG_SHA512 is not set
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> CONFIG_BLK_DEV_BSG=y
> # CONFIG_BLK_DEV_BSGLIB is not set
> # CONFIG_BLK_DEV_INTEGRITY is not set
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> 
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_DEADLINE=m
> # CONFIG_IOSCHED_CFQ is not set
> CONFIG_DEFAULT_NOOP=y
> CONFIG_DEFAULT_IOSCHED="noop"
> CONFIG_PADATA=y
> CONFIG_ASN1=y
> CONFIG_UNINLINE_SPIN_UNLOCK=y
> CONFIG_MUTEX_SPIN_ON_OWNER=y
> # CONFIG_FREEZER is not set
> 
> #
> # Processor type and features
> #
> CONFIG_ZONE_DMA=y
> CONFIG_SMP=y
> CONFIG_X86_MPPARSE=y
> CONFIG_X86_EXTENDED_PLATFORM=y
> CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
> # CONFIG_SCHED_OMIT_FRAME_POINTER is not set
> CONFIG_PARAVIRT_GUEST=y
> CONFIG_PARAVIRT_TIME_ACCOUNTING=y
> # CONFIG_XEN is not set
> # CONFIG_XEN_PRIVILEGED_GUEST is not set
> CONFIG_KVM_GUEST=y
> CONFIG_PARAVIRT=y
> # CONFIG_PARAVIRT_SPINLOCKS is not set
> CONFIG_PARAVIRT_CLOCK=y
> CONFIG_NO_BOOTMEM=y
> # CONFIG_MEMTEST is not set
> # CONFIG_MK8 is not set
> # CONFIG_MPSC is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_MATOM is not set
> CONFIG_GENERIC_CPU=y
> CONFIG_X86_INTERNODE_CACHE_SHIFT=6
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_XADD=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=64
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_CPU_SUP_INTEL=y
> CONFIG_CPU_SUP_AMD=y
> CONFIG_CPU_SUP_CENTAUR=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> CONFIG_SWIOTLB=y
> CONFIG_IOMMU_HELPER=y
> CONFIG_NR_CPUS=8
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> CONFIG_PREEMPT_COUNT=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
> CONFIG_X86_MCE=y
> # CONFIG_X86_MCE_INTEL is not set
> # CONFIG_X86_MCE_AMD is not set
> # CONFIG_X86_MCE_INJECT is not set
> CONFIG_I8K=m
> # CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=m
> CONFIG_X86_CPUID=m
> CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> CONFIG_DIRECT_GBPAGES=y
> CONFIG_NUMA=y
> # CONFIG_NUMA_EMU is not set
> CONFIG_NODES_SHIFT=6
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_SPARSEMEM_MANUAL=y
> CONFIG_SPARSEMEM=y
> CONFIG_NEED_MULTIPLE_NODES=y
> CONFIG_HAVE_MEMORY_PRESENT=y
> CONFIG_SPARSEMEM_EXTREME=y
> CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
> # CONFIG_SPARSEMEM_VMEMMAP is not set
> CONFIG_HAVE_MEMBLOCK=y
> CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
> CONFIG_ARCH_DISCARD_MEMBLOCK=y
> CONFIG_MEMORY_ISOLATION=y
> # CONFIG_MEMORY_HOTPLUG is not set
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_COMPACTION=y
> CONFIG_MIGRATION=y
> CONFIG_PHYS_ADDR_T_64BIT=y
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_KSM=y
> CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
> CONFIG_MEMORY_FAILURE=y
> CONFIG_TRANSPARENT_HUGEPAGE=y
> CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
> # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
> CONFIG_CROSS_MEMORY_ATTACH=y
> # CONFIG_CLEANCACHE is not set
> # CONFIG_FRONTSWAP is not set
> # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> CONFIG_X86_RESERVE_LOW=64
> CONFIG_MTRR=y
> # CONFIG_MTRR_SANITIZER is not set
> CONFIG_X86_PAT=y
> CONFIG_ARCH_USES_PG_UNCACHED=y
> CONFIG_ARCH_RANDOM=y
> CONFIG_X86_SMAP=y
> # CONFIG_SECCOMP is not set
> # CONFIG_CC_STACKPROTECTOR is not set
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> CONFIG_HZ_300=y
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=300
> CONFIG_SCHED_HRTICK=y
> # CONFIG_KEXEC is not set
> CONFIG_CRASH_DUMP=y
> CONFIG_PHYSICAL_START=0x1000000
> # CONFIG_RELOCATABLE is not set
> CONFIG_PHYSICAL_ALIGN=0x1000000
> # CONFIG_HOTPLUG_CPU is not set
> CONFIG_CMDLINE_BOOL=y
> CONFIG_CMDLINE=""
> # CONFIG_CMDLINE_OVERRIDE is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_USE_PERCPU_NUMA_NODE_ID=y
> 
> #
> # Power management and ACPI options
> #
> # CONFIG_SUSPEND is not set
> # CONFIG_HIBERNATION is not set
> # CONFIG_PM_RUNTIME is not set
> CONFIG_SFI=y
> 
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=m
> CONFIG_CPU_FREQ_STAT=m
> # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=m
> # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> 
> #
> # x86 CPU frequency scaling drivers
> #
> # CONFIG_X86_P4_CLOCKMOD is not set
> 
> #
> # shared options
> #
> # CONFIG_X86_SPEEDSTEP_LIB is not set
> # CONFIG_CPU_IDLE is not set
> # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
> 
> #
> # Memory power savings
> #
> CONFIG_I7300_IDLE_IOAT_CHANNEL=y
> CONFIG_I7300_IDLE=m
> 
> #
> # Bus options (PCI etc.)
> #
> # CONFIG_PCI is not set
> CONFIG_PCI_LABEL=y
> CONFIG_ISA_DMA_API=y
> # CONFIG_PCCARD is not set
> 
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
> # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> # CONFIG_HAVE_AOUT is not set
> CONFIG_BINFMT_MISC=m
> CONFIG_COREDUMP=y
> # CONFIG_IA32_EMULATION is not set
> CONFIG_HAVE_TEXT_POKE_SMP=y
> CONFIG_X86_DEV_DMA_OPS=y
> # CONFIG_NET is not set
> CONFIG_HAVE_BPF_JIT=y
> 
> #
> # Device Drivers
> #
> 
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH=""
> # CONFIG_DEVTMPFS is not set
> # CONFIG_STANDALONE is not set
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> CONFIG_FIRMWARE_IN_KERNEL=y
> CONFIG_EXTRA_FIRMWARE=""
> # CONFIG_SYS_HYPERVISOR is not set
> # CONFIG_GENERIC_CPU_DEVICES is not set
> CONFIG_REGMAP=y
> CONFIG_REGMAP_I2C=m
> CONFIG_REGMAP_SPI=y
> CONFIG_REGMAP_IRQ=y
> CONFIG_DMA_SHARED_BUFFER=y
> 
> #
> # Bus devices
> #
> CONFIG_OMAP_OCP2SCP=m
> CONFIG_MTD=m
> CONFIG_MTD_TESTS=m
> CONFIG_MTD_REDBOOT_PARTS=m
> CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> CONFIG_MTD_REDBOOT_PARTS_READONLY=y
> # CONFIG_MTD_AR7_PARTS is not set
> 
> #
> # User Modules And Translation Layers
> #
> # CONFIG_MTD_CHAR is not set
> CONFIG_HAVE_MTD_OTP=y
> CONFIG_MTD_BLKDEVS=m
> CONFIG_MTD_BLOCK=m
> CONFIG_MTD_BLOCK_RO=m
> CONFIG_FTL=m
> # CONFIG_NFTL is not set
> # CONFIG_INFTL is not set
> CONFIG_RFD_FTL=m
> # CONFIG_SSFDC is not set
> CONFIG_SM_FTL=m
> # CONFIG_MTD_OOPS is not set
> CONFIG_MTD_SWAP=m
> 
> #
> # RAM/ROM/Flash chip drivers
> #
> CONFIG_MTD_CFI=m
> CONFIG_MTD_JEDECPROBE=m
> CONFIG_MTD_GEN_PROBE=m
> CONFIG_MTD_CFI_ADV_OPTIONS=y
> CONFIG_MTD_CFI_NOSWAP=y
> # CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
> # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
> # CONFIG_MTD_CFI_GEOMETRY is not set
> CONFIG_MTD_MAP_BANK_WIDTH_1=y
> CONFIG_MTD_MAP_BANK_WIDTH_2=y
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> CONFIG_MTD_CFI_I1=y
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
> CONFIG_MTD_OTP=y
> CONFIG_MTD_CFI_INTELEXT=m
> CONFIG_MTD_CFI_AMDSTD=m
> # CONFIG_MTD_CFI_STAA is not set
> CONFIG_MTD_CFI_UTIL=m
> CONFIG_MTD_RAM=m
> # CONFIG_MTD_ROM is not set
> CONFIG_MTD_ABSENT=m
> 
> #
> # Mapping drivers for chip access
> #
> CONFIG_MTD_COMPLEX_MAPPINGS=y
> CONFIG_MTD_PHYSMAP=m
> CONFIG_MTD_PHYSMAP_COMPAT=y
> CONFIG_MTD_PHYSMAP_START=0x8000000
> CONFIG_MTD_PHYSMAP_LEN=0
> CONFIG_MTD_PHYSMAP_BANKWIDTH=2
> CONFIG_MTD_SC520CDP=m
> CONFIG_MTD_NETSC520=m
> CONFIG_MTD_TS5500=m
> # CONFIG_MTD_SBC_GXX is not set
> # CONFIG_MTD_AMD76XROM is not set
> CONFIG_MTD_ICHXROM=m
> # CONFIG_MTD_NETtel is not set
> CONFIG_MTD_L440GX=m
> CONFIG_MTD_PLATRAM=m
> # CONFIG_MTD_LATCH_ADDR is not set
> 
> #
> # Self-contained MTD device drivers
> #
> CONFIG_MTD_DATAFLASH=m
> CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
> # CONFIG_MTD_DATAFLASH_OTP is not set
> CONFIG_MTD_M25P80=m
> CONFIG_M25PXX_USE_FAST_READ=y
> CONFIG_MTD_SST25L=m
> # CONFIG_MTD_SLRAM is not set
> # CONFIG_MTD_PHRAM is not set
> # CONFIG_MTD_MTDRAM is not set
> CONFIG_MTD_BLOCK2MTD=m
> 
> #
> # Disk-On-Chip Device Drivers
> #
> # CONFIG_MTD_DOCG3 is not set
> CONFIG_MTD_NAND_ECC=m
> # CONFIG_MTD_NAND_ECC_SMC is not set
> # CONFIG_MTD_NAND is not set
> # CONFIG_MTD_ONENAND is not set
> 
> #
> # LPDDR flash memory drivers
> #
> # CONFIG_MTD_LPDDR is not set
> # CONFIG_MTD_UBI is not set
> # CONFIG_PARPORT is not set
> # CONFIG_BLK_DEV is not set
> 
> #
> # Misc devices
> #
> CONFIG_SENSORS_LIS3LV02D=m
> CONFIG_AD525X_DPOT=m
> # CONFIG_AD525X_DPOT_I2C is not set
> # CONFIG_AD525X_DPOT_SPI is not set
> # CONFIG_ICS932S401 is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> # CONFIG_APDS9802ALS is not set
> # CONFIG_ISL29003 is not set
> # CONFIG_ISL29020 is not set
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_SENSORS_BH1780 is not set
> # CONFIG_SENSORS_BH1770 is not set
> CONFIG_SENSORS_APDS990X=m
> # CONFIG_HMC6352 is not set
> # CONFIG_DS1682 is not set
> CONFIG_TI_DAC7512=m
> # CONFIG_VMWARE_BALLOON is not set
> # CONFIG_BMP085_I2C is not set
> # CONFIG_BMP085_SPI is not set
> # CONFIG_USB_SWITCH_FSA9480 is not set
> CONFIG_C2PORT=m
> # CONFIG_C2PORT_DURAMAR_2150 is not set
> 
> #
> # EEPROM support
> #
> # CONFIG_EEPROM_AT24 is not set
> CONFIG_EEPROM_AT25=m
> CONFIG_EEPROM_LEGACY=m
> CONFIG_EEPROM_MAX6875=m
> # CONFIG_EEPROM_93CX6 is not set
> # CONFIG_EEPROM_93XX46 is not set
> 
> #
> # Texas Instruments shared transport line discipline
> #
> CONFIG_SENSORS_LIS3_SPI=m
> # CONFIG_SENSORS_LIS3_I2C is not set
> 
> #
> # Altera FPGA firmware download module
> #
> CONFIG_ALTERA_STAPL=m
> CONFIG_HAVE_IDE=y
> # CONFIG_IDE is not set
> 
> #
> # SCSI device support
> #
> CONFIG_SCSI_MOD=y
> # CONFIG_RAID_ATTRS is not set
> # CONFIG_SCSI is not set
> # CONFIG_SCSI_DMA is not set
> # CONFIG_SCSI_NETLINK is not set
> # CONFIG_ATA is not set
> # CONFIG_MD is not set
> CONFIG_MACINTOSH_DRIVERS=y
> # CONFIG_MAC_EMUMOUSEBTN is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> # CONFIG_INPUT_FF_MEMLESS is not set
> CONFIG_INPUT_POLLDEV=m
> CONFIG_INPUT_SPARSEKMAP=m
> CONFIG_INPUT_MATRIXKMAP=m
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ADP5588=m
> # CONFIG_KEYBOARD_ADP5589 is not set
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_QT2160 is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_TCA6416 is not set
> # CONFIG_KEYBOARD_TCA8418 is not set
> CONFIG_KEYBOARD_LM8323=m
> CONFIG_KEYBOARD_LM8333=m
> CONFIG_KEYBOARD_MAX7359=m
> # CONFIG_KEYBOARD_MCS is not set
> # CONFIG_KEYBOARD_MPR121 is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_OPENCORES is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> CONFIG_KEYBOARD_SUNKBD=m
> CONFIG_KEYBOARD_STMPE=m
> CONFIG_KEYBOARD_OMAP4=m
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_INPUT_MOUSE is not set
> CONFIG_INPUT_JOYSTICK=y
> # CONFIG_JOYSTICK_ANALOG is not set
> CONFIG_JOYSTICK_A3D=m
> CONFIG_JOYSTICK_ADI=m
> # CONFIG_JOYSTICK_COBRA is not set
> # CONFIG_JOYSTICK_GF2K is not set
> CONFIG_JOYSTICK_GRIP=m
> # CONFIG_JOYSTICK_GRIP_MP is not set
> CONFIG_JOYSTICK_GUILLEMOT=m
> # CONFIG_JOYSTICK_INTERACT is not set
> # CONFIG_JOYSTICK_SIDEWINDER is not set
> # CONFIG_JOYSTICK_TMDC is not set
> # CONFIG_JOYSTICK_IFORCE is not set
> CONFIG_JOYSTICK_WARRIOR=m
> CONFIG_JOYSTICK_MAGELLAN=m
> CONFIG_JOYSTICK_SPACEORB=m
> CONFIG_JOYSTICK_SPACEBALL=m
> # CONFIG_JOYSTICK_STINGER is not set
> CONFIG_JOYSTICK_TWIDJOY=m
> CONFIG_JOYSTICK_ZHENHUA=m
> # CONFIG_JOYSTICK_AS5011 is not set
> # CONFIG_JOYSTICK_JOYDUMP is not set
> CONFIG_INPUT_TABLET=y
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
> 
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=m
> CONFIG_SERIO_CT82C710=m
> CONFIG_SERIO_LIBPS2=y
> CONFIG_SERIO_RAW=m
> # CONFIG_SERIO_ALTERA_PS2 is not set
> CONFIG_SERIO_PS2MULT=m
> CONFIG_GAMEPORT=m
> CONFIG_GAMEPORT_NS558=m
> # CONFIG_GAMEPORT_L4 is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_VT_HW_CONSOLE_BINDING is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
> # CONFIG_LEGACY_PTYS is not set
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_N_HDLC is not set
> CONFIG_TRACE_ROUTER=m
> CONFIG_TRACE_SINK=m
> # CONFIG_DEVKMEM is not set
> # CONFIG_STALDRV is not set
> 
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=m
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
> 
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_MAX3100 is not set
> # CONFIG_SERIAL_MAX310X is not set
> CONFIG_SERIAL_CORE=m
> # CONFIG_SERIAL_SCCNXP is not set
> CONFIG_SERIAL_TIMBERDALE=m
> CONFIG_SERIAL_ALTERA_JTAGUART=m
> CONFIG_SERIAL_ALTERA_UART=m
> CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
> CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
> # CONFIG_SERIAL_XILINX_PS_UART is not set
> CONFIG_HVC_DRIVER=y
> CONFIG_VIRTIO_CONSOLE=m
> CONFIG_IPMI_HANDLER=m
> # CONFIG_IPMI_PANIC_EVENT is not set
> CONFIG_IPMI_DEVICE_INTERFACE=m
> CONFIG_IPMI_SI=m
> # CONFIG_IPMI_WATCHDOG is not set
> CONFIG_IPMI_POWEROFF=m
> CONFIG_HW_RANDOM=m
> # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> # CONFIG_HW_RANDOM_VIA is not set
> CONFIG_HW_RANDOM_VIRTIO=m
> # CONFIG_HW_RANDOM_TPM is not set
> CONFIG_NVRAM=m
> CONFIG_R3964=m
> # CONFIG_MWAVE is not set
> CONFIG_RAW_DRIVER=m
> CONFIG_MAX_RAW_DEVS=256
> # CONFIG_HANGCHECK_TIMER is not set
> CONFIG_TCG_TPM=m
> # CONFIG_TCG_TIS is not set
> CONFIG_TCG_TIS_I2C_INFINEON=m
> # CONFIG_TCG_NSC is not set
> # CONFIG_TCG_ATMEL is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_I2C=m
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_COMPAT=y
> # CONFIG_I2C_CHARDEV is not set
> # CONFIG_I2C_MUX is not set
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_SMBUS=m
> CONFIG_I2C_ALGOBIT=m
> CONFIG_I2C_ALGOPCA=m
> 
> #
> # I2C Hardware Bus support
> #
> 
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> CONFIG_I2C_OCORES=m
> CONFIG_I2C_PCA_PLATFORM=m
> # CONFIG_I2C_PXA_PCI is not set
> # CONFIG_I2C_SIMTEC is not set
> CONFIG_I2C_XILINX=m
> 
> #
> # External I2C/SMBus adapter drivers
> #
> CONFIG_I2C_PARPORT_LIGHT=m
> # CONFIG_I2C_TAOS_EVM is not set
> 
> #
> # Other I2C/SMBus bus drivers
> #
> # CONFIG_I2C_STUB is not set
> CONFIG_I2C_DEBUG_CORE=y
> # CONFIG_I2C_DEBUG_ALGO is not set
> CONFIG_I2C_DEBUG_BUS=y
> CONFIG_SPI=y
> CONFIG_SPI_MASTER=y
> 
> #
> # SPI Master Controller Drivers
> #
> # CONFIG_SPI_ALTERA is not set
> CONFIG_SPI_BITBANG=m
> # CONFIG_SPI_PXA2XX_PCI is not set
> # CONFIG_SPI_SC18IS602 is not set
> # CONFIG_SPI_XCOMM is not set
> CONFIG_SPI_XILINX=m
> CONFIG_SPI_DESIGNWARE=m
> 
> #
> # SPI Protocol Masters
> #
> # CONFIG_SPI_SPIDEV is not set
> CONFIG_SPI_TLE62X0=m
> CONFIG_HSI=m
> CONFIG_HSI_BOARDINFO=y
> 
> #
> # HSI clients
> #
> # CONFIG_HSI_CHAR is not set
> 
> #
> # PPS support
> #
> # CONFIG_PPS is not set
> 
> #
> # PPS generators support
> #
> 
> #
> # PTP clock support
> #
> 
> #
> # Enable Device Drivers -> PPS to see the PTP clock options.
> #
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> # CONFIG_GPIOLIB is not set
> CONFIG_W1=m
> 
> #
> # 1-wire Bus Masters
> #
> # CONFIG_W1_MASTER_DS2482 is not set
> CONFIG_W1_MASTER_DS1WM=m
> CONFIG_HDQ_MASTER_OMAP=m
> 
> #
> # 1-wire Slaves
> #
> CONFIG_W1_SLAVE_THERM=m
> # CONFIG_W1_SLAVE_SMEM is not set
> CONFIG_W1_SLAVE_DS2408=m
> CONFIG_W1_SLAVE_DS2423=m
> # CONFIG_W1_SLAVE_DS2431 is not set
> CONFIG_W1_SLAVE_DS2433=m
> CONFIG_W1_SLAVE_DS2433_CRC=y
> # CONFIG_W1_SLAVE_DS2760 is not set
> CONFIG_W1_SLAVE_DS2780=m
> # CONFIG_W1_SLAVE_DS2781 is not set
> CONFIG_W1_SLAVE_DS28E04=m
> # CONFIG_W1_SLAVE_BQ27000 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_TEST_POWER is not set
> CONFIG_BATTERY_DS2780=m
> # CONFIG_BATTERY_DS2781 is not set
> # CONFIG_BATTERY_DS2782 is not set
> CONFIG_BATTERY_SBS=m
> CONFIG_BATTERY_BQ27x00=m
> # CONFIG_BATTERY_BQ27X00_I2C is not set
> CONFIG_BATTERY_BQ27X00_PLATFORM=y
> # CONFIG_BATTERY_DA9052 is not set
> CONFIG_BATTERY_MAX17040=m
> CONFIG_BATTERY_MAX17042=m
> CONFIG_CHARGER_PCF50633=m
> # CONFIG_CHARGER_MAX8903 is not set
> # CONFIG_CHARGER_LP8727 is not set
> CONFIG_CHARGER_MANAGER=y
> # CONFIG_CHARGER_SMB347 is not set
> CONFIG_POWER_AVS=y
> CONFIG_HWMON=m
> CONFIG_HWMON_VID=m
> # CONFIG_HWMON_DEBUG_CHIP is not set
> 
> #
> # Native drivers
> #
> # CONFIG_SENSORS_ABITUGURU is not set
> CONFIG_SENSORS_ABITUGURU3=m
> CONFIG_SENSORS_AD7314=m
> CONFIG_SENSORS_AD7414=m
> CONFIG_SENSORS_AD7418=m
> CONFIG_SENSORS_ADCXX=m
> # CONFIG_SENSORS_ADM1021 is not set
> CONFIG_SENSORS_ADM1025=m
> CONFIG_SENSORS_ADM1026=m
> CONFIG_SENSORS_ADM1029=m
> # CONFIG_SENSORS_ADM1031 is not set
> CONFIG_SENSORS_ADM9240=m
> CONFIG_SENSORS_ADT7410=m
> # CONFIG_SENSORS_ADT7411 is not set
> CONFIG_SENSORS_ADT7462=m
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_ADT7475 is not set
> # CONFIG_SENSORS_ASC7621 is not set
> # CONFIG_SENSORS_ASB100 is not set
> CONFIG_SENSORS_ATXP1=m
> CONFIG_SENSORS_DS620=m
> # CONFIG_SENSORS_DS1621 is not set
> CONFIG_SENSORS_DA9052_ADC=m
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_F71882FG is not set
> CONFIG_SENSORS_F75375S=m
> CONFIG_SENSORS_FSCHMD=m
> CONFIG_SENSORS_G760A=m
> CONFIG_SENSORS_GL518SM=m
> # CONFIG_SENSORS_GL520SM is not set
> CONFIG_SENSORS_HIH6130=m
> CONFIG_SENSORS_IBMAEM=m
> # CONFIG_SENSORS_IBMPEX is not set
> # CONFIG_SENSORS_IT87 is not set
> CONFIG_SENSORS_JC42=m
> CONFIG_SENSORS_LINEAGE=m
> CONFIG_SENSORS_LM63=m
> # CONFIG_SENSORS_LM70 is not set
> CONFIG_SENSORS_LM73=m
> CONFIG_SENSORS_LM75=m
> # CONFIG_SENSORS_LM77 is not set
> CONFIG_SENSORS_LM78=m
> # CONFIG_SENSORS_LM80 is not set
> CONFIG_SENSORS_LM83=m
> CONFIG_SENSORS_LM85=m
> CONFIG_SENSORS_LM87=m
> CONFIG_SENSORS_LM90=m
> # CONFIG_SENSORS_LM92 is not set
> CONFIG_SENSORS_LM93=m
> # CONFIG_SENSORS_LTC4151 is not set
> CONFIG_SENSORS_LTC4215=m
> CONFIG_SENSORS_LTC4245=m
> CONFIG_SENSORS_LTC4261=m
> # CONFIG_SENSORS_LM95241 is not set
> CONFIG_SENSORS_LM95245=m
> # CONFIG_SENSORS_MAX1111 is not set
> # CONFIG_SENSORS_MAX16065 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_MAX1668 is not set
> # CONFIG_SENSORS_MAX197 is not set
> CONFIG_SENSORS_MAX6639=m
> # CONFIG_SENSORS_MAX6642 is not set
> CONFIG_SENSORS_MAX6650=m
> CONFIG_SENSORS_MCP3021=m
> # CONFIG_SENSORS_NTC_THERMISTOR is not set
> CONFIG_SENSORS_PC87360=m
> # CONFIG_SENSORS_PC87427 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_PMBUS is not set
> CONFIG_SENSORS_SHT21=m
> # CONFIG_SENSORS_SMM665 is not set
> CONFIG_SENSORS_DME1737=m
> CONFIG_SENSORS_EMC1403=m
> CONFIG_SENSORS_EMC2103=m
> CONFIG_SENSORS_EMC6W201=m
> CONFIG_SENSORS_SMSC47M1=m
> # CONFIG_SENSORS_SMSC47M192 is not set
> CONFIG_SENSORS_SMSC47B397=m
> # CONFIG_SENSORS_SCH56XX_COMMON is not set
> # CONFIG_SENSORS_SCH5627 is not set
> # CONFIG_SENSORS_SCH5636 is not set
> CONFIG_SENSORS_ADS1015=m
> # CONFIG_SENSORS_ADS7828 is not set
> # CONFIG_SENSORS_ADS7871 is not set
> CONFIG_SENSORS_AMC6821=m
> # CONFIG_SENSORS_INA2XX is not set
> # CONFIG_SENSORS_THMC50 is not set
> # CONFIG_SENSORS_TMP102 is not set
> # CONFIG_SENSORS_TMP401 is not set
> # CONFIG_SENSORS_TMP421 is not set
> CONFIG_SENSORS_VIA_CPUTEMP=m
> # CONFIG_SENSORS_VT1211 is not set
> # CONFIG_SENSORS_W83781D is not set
> CONFIG_SENSORS_W83791D=m
> # CONFIG_SENSORS_W83792D is not set
> CONFIG_SENSORS_W83793=m
> CONFIG_SENSORS_W83795=m
> # CONFIG_SENSORS_W83795_FANCTRL is not set
> CONFIG_SENSORS_W83L785TS=m
> # CONFIG_SENSORS_W83L786NG is not set
> CONFIG_SENSORS_W83627HF=m
> CONFIG_SENSORS_W83627EHF=m
> # CONFIG_SENSORS_APPLESMC is not set
> # CONFIG_SENSORS_MC13783_ADC is not set
> CONFIG_THERMAL=m
> CONFIG_THERMAL_HWMON=y
> # CONFIG_CPU_THERMAL is not set
> CONFIG_WATCHDOG=y
> CONFIG_WATCHDOG_CORE=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
> 
> #
> # Watchdog Device Drivers
> #
> # CONFIG_SOFT_WATCHDOG is not set
> CONFIG_DA9052_WATCHDOG=m
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> CONFIG_F71808E_WDT=m
> CONFIG_SC520_WDT=m
> # CONFIG_SBC_FITPC2_WATCHDOG is not set
> CONFIG_EUROTECH_WDT=m
> CONFIG_IB700_WDT=m
> CONFIG_IBMASR=m
> CONFIG_WAFER_WDT=m
> CONFIG_IT8712F_WDT=m
> # CONFIG_IT87_WDT is not set
> # CONFIG_SC1200_WDT is not set
> CONFIG_PC87413_WDT=m
> CONFIG_60XX_WDT=m
> # CONFIG_SBC8360_WDT is not set
> # CONFIG_CPU5_WDT is not set
> # CONFIG_SMSC_SCH311X_WDT is not set
> CONFIG_SMSC37B787_WDT=m
> CONFIG_W83627HF_WDT=m
> CONFIG_W83697HF_WDT=m
> # CONFIG_W83697UG_WDT is not set
> CONFIG_W83877F_WDT=m
> CONFIG_W83977F_WDT=m
> CONFIG_MACHZ_WDT=m
> # CONFIG_SBC_EPX_C3_WATCHDOG is not set
> CONFIG_SSB_POSSIBLE=y
> 
> #
> # Sonics Silicon Backplane
> #
> CONFIG_SSB=m
> CONFIG_SSB_DEBUG=y
> CONFIG_BCMA_POSSIBLE=y
> 
> #
> # Broadcom specific AMBA
> #
> CONFIG_BCMA=m
> CONFIG_BCMA_DRIVER_GMAC_CMN=y
> # CONFIG_BCMA_DEBUG is not set
> 
> #
> # Multifunction device drivers
> #
> CONFIG_MFD_CORE=y
> CONFIG_MFD_SM501=m
> CONFIG_HTC_PASIC3=m
> # CONFIG_MFD_LM3533 is not set
> CONFIG_TPS6105X=m
> CONFIG_TPS6507X=m
> CONFIG_MFD_TPS65217=m
> CONFIG_MFD_STMPE=y
> 
> #
> # STMPE Interface Drivers
> #
> CONFIG_STMPE_SPI=y
> # CONFIG_MFD_TMIO is not set
> CONFIG_PMIC_DA9052=y
> CONFIG_MFD_DA9052_SPI=y
> CONFIG_MFD_ARIZONA=y
> # CONFIG_MFD_ARIZONA_I2C is not set
> CONFIG_MFD_ARIZONA_SPI=m
> CONFIG_MFD_WM5102=y
> # CONFIG_MFD_WM5110 is not set
> # CONFIG_MFD_WM831X_SPI is not set
> CONFIG_MFD_PCF50633=m
> CONFIG_PCF50633_ADC=m
> CONFIG_PCF50633_GPIO=m
> CONFIG_MFD_MC13783=m
> CONFIG_MFD_MC13XXX=m
> CONFIG_MFD_MC13XXX_SPI=m
> # CONFIG_MFD_MC13XXX_I2C is not set
> # CONFIG_ABX500_CORE is not set
> CONFIG_EZX_PCAP=y
> CONFIG_MFD_WL1273_CORE=m
> CONFIG_REGULATOR=y
> # CONFIG_REGULATOR_DEBUG is not set
> # CONFIG_REGULATOR_DUMMY is not set
> CONFIG_REGULATOR_FIXED_VOLTAGE=m
> # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
> CONFIG_REGULATOR_USERSPACE_CONSUMER=m
> CONFIG_REGULATOR_AD5398=m
> CONFIG_REGULATOR_ARIZONA=m
> CONFIG_REGULATOR_DA9052=m
> CONFIG_REGULATOR_FAN53555=m
> CONFIG_REGULATOR_MC13XXX_CORE=m
> CONFIG_REGULATOR_MC13783=m
> # CONFIG_REGULATOR_MC13892 is not set
> CONFIG_REGULATOR_ISL6271A=m
> CONFIG_REGULATOR_MAX1586=m
> # CONFIG_REGULATOR_MAX8649 is not set
> CONFIG_REGULATOR_MAX8660=m
> CONFIG_REGULATOR_MAX8952=m
> # CONFIG_REGULATOR_PCAP is not set
> CONFIG_REGULATOR_LP3971=m
> # CONFIG_REGULATOR_LP3972 is not set
> # CONFIG_REGULATOR_PCF50633 is not set
> # CONFIG_REGULATOR_TPS6105X is not set
> CONFIG_REGULATOR_TPS62360=m
> # CONFIG_REGULATOR_TPS65023 is not set
> CONFIG_REGULATOR_TPS6507X=m
> # CONFIG_REGULATOR_TPS65217 is not set
> # CONFIG_REGULATOR_TPS6524X is not set
> CONFIG_MEDIA_SUPPORT=m
> 
> #
> # Multimedia core support
> #
> # CONFIG_MEDIA_CAMERA_SUPPORT is not set
> CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
> # CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
> CONFIG_MEDIA_RADIO_SUPPORT=y
> # CONFIG_MEDIA_RC_SUPPORT is not set
> CONFIG_VIDEO_DEV=m
> CONFIG_VIDEO_V4L2=m
> CONFIG_VIDEO_ADV_DEBUG=y
> # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
> 
> #
> # Media drivers
> #
> 
> #
> # Supported MMC/SDIO adapters
> #
> CONFIG_RADIO_ADAPTERS=y
> CONFIG_RADIO_SI470X=y
> CONFIG_I2C_SI470X=m
> CONFIG_I2C_SI4713=m
> CONFIG_RADIO_SI4713=m
> # CONFIG_RADIO_TEA5764 is not set
> CONFIG_RADIO_SAA7706H=m
> # CONFIG_RADIO_TEF6862 is not set
> # CONFIG_RADIO_WL1273 is not set
> 
> #
> # Texas Instruments WL128x FM driver (ST based)
> #
> # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
> 
> #
> # Media ancillary drivers (tuners, sensors, i2c, frontends)
> #
> 
> #
> # Encoders, decoders, sensors and other helper chips
> #
> 
> #
> # Audio decoders, processors and mixers
> #
> CONFIG_VIDEO_TVAUDIO=m
> # CONFIG_VIDEO_TDA7432 is not set
> # CONFIG_VIDEO_TDA9840 is not set
> # CONFIG_VIDEO_TEA6415C is not set
> # CONFIG_VIDEO_TEA6420 is not set
> # CONFIG_VIDEO_MSP3400 is not set
> CONFIG_VIDEO_CS5345=m
> CONFIG_VIDEO_CS53L32A=m
> CONFIG_VIDEO_TLV320AIC23B=m
> # CONFIG_VIDEO_WM8775 is not set
> CONFIG_VIDEO_WM8739=m
> # CONFIG_VIDEO_VP27SMPX is not set
> 
> #
> # RDS decoders
> #
> CONFIG_VIDEO_SAA6588=m
> 
> #
> # Video decoders
> #
> CONFIG_VIDEO_ADV7180=m
> # CONFIG_VIDEO_ADV7183 is not set
> # CONFIG_VIDEO_BT819 is not set
> CONFIG_VIDEO_BT856=m
> CONFIG_VIDEO_BT866=m
> CONFIG_VIDEO_KS0127=m
> # CONFIG_VIDEO_SAA7110 is not set
> # CONFIG_VIDEO_SAA711X is not set
> # CONFIG_VIDEO_SAA7191 is not set
> # CONFIG_VIDEO_TVP514X is not set
> # CONFIG_VIDEO_TVP5150 is not set
> CONFIG_VIDEO_TVP7002=m
> CONFIG_VIDEO_VPX3220=m
> 
> #
> # Video and audio decoders
> #
> CONFIG_VIDEO_SAA717X=m
> CONFIG_VIDEO_CX25840=m
> 
> #
> # MPEG video encoders
> #
> CONFIG_VIDEO_CX2341X=m
> 
> #
> # Video encoders
> #
> # CONFIG_VIDEO_SAA7127 is not set
> # CONFIG_VIDEO_SAA7185 is not set
> CONFIG_VIDEO_ADV7170=m
> CONFIG_VIDEO_ADV7175=m
> CONFIG_VIDEO_ADV7343=m
> CONFIG_VIDEO_ADV7393=m
> # CONFIG_VIDEO_AK881X is not set
> 
> #
> # Camera sensor devices
> #
> 
> #
> # Flash devices
> #
> 
> #
> # Video improvement chips
> #
> CONFIG_VIDEO_UPD64031A=m
> # CONFIG_VIDEO_UPD64083 is not set
> 
> #
> # Miscelaneous helper chips
> #
> # CONFIG_VIDEO_THS7303 is not set
> # CONFIG_VIDEO_M52790 is not set
> 
> #
> # Sensors used on soc_camera driver
> #
> # CONFIG_MEDIA_ATTACH is not set
> CONFIG_MEDIA_TUNER=m
> 
> #
> # Customize TV tuners
> #
> # CONFIG_MEDIA_TUNER_SIMPLE is not set
> # CONFIG_MEDIA_TUNER_TDA8290 is not set
> CONFIG_MEDIA_TUNER_TDA827X=m
> CONFIG_MEDIA_TUNER_TDA18271=m
> CONFIG_MEDIA_TUNER_TDA9887=m
> CONFIG_MEDIA_TUNER_TEA5761=m
> CONFIG_MEDIA_TUNER_TEA5767=m
> CONFIG_MEDIA_TUNER_MT20XX=m
> CONFIG_MEDIA_TUNER_MT2060=m
> # CONFIG_MEDIA_TUNER_MT2063 is not set
> CONFIG_MEDIA_TUNER_MT2266=m
> CONFIG_MEDIA_TUNER_MT2131=m
> CONFIG_MEDIA_TUNER_QT1010=m
> # CONFIG_MEDIA_TUNER_XC2028 is not set
> CONFIG_MEDIA_TUNER_XC5000=m
> CONFIG_MEDIA_TUNER_XC4000=m
> # CONFIG_MEDIA_TUNER_MXL5005S is not set
> CONFIG_MEDIA_TUNER_MXL5007T=m
> # CONFIG_MEDIA_TUNER_MC44S803 is not set
> # CONFIG_MEDIA_TUNER_MAX2165 is not set
> # CONFIG_MEDIA_TUNER_TDA18218 is not set
> CONFIG_MEDIA_TUNER_FC0011=m
> CONFIG_MEDIA_TUNER_FC0012=m
> CONFIG_MEDIA_TUNER_FC0013=m
> # CONFIG_MEDIA_TUNER_TDA18212 is not set
> CONFIG_MEDIA_TUNER_E4000=m
> # CONFIG_MEDIA_TUNER_FC2580 is not set
> # CONFIG_MEDIA_TUNER_TUA9001 is not set
> 
> #
> # Customise DVB Frontends
> #
> # CONFIG_DVB_AU8522_V4L is not set
> CONFIG_DVB_TUNER_DIB0070=m
> CONFIG_DVB_TUNER_DIB0090=m
> 
> #
> # Tools to develop new frontends
> #
> CONFIG_DVB_DUMMY_FE=m
> 
> #
> # Graphics support
> #
> CONFIG_DRM=m
> # CONFIG_VGASTATE is not set
> # CONFIG_VIDEO_OUTPUT_CONTROL is not set
> # CONFIG_FB is not set
> # CONFIG_EXYNOS_VIDEO is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> CONFIG_LCD_CLASS_DEVICE=m
> CONFIG_LCD_LTV350QV=m
> CONFIG_LCD_ILI9320=m
> CONFIG_LCD_TDO24M=m
> CONFIG_LCD_VGG2432A4=m
> CONFIG_LCD_PLATFORM=m
> CONFIG_LCD_S6E63M0=m
> CONFIG_LCD_LD9040=m
> CONFIG_LCD_AMS369FG06=m
> CONFIG_BACKLIGHT_CLASS_DEVICE=m
> CONFIG_BACKLIGHT_GENERIC=m
> CONFIG_BACKLIGHT_DA9052=m
> # CONFIG_BACKLIGHT_SAHARA is not set
> # CONFIG_BACKLIGHT_ADP8860 is not set
> CONFIG_BACKLIGHT_ADP8870=m
> # CONFIG_BACKLIGHT_PCF50633 is not set
> # CONFIG_BACKLIGHT_LM3630 is not set
> # CONFIG_BACKLIGHT_LM3639 is not set
> CONFIG_BACKLIGHT_LP855X=m
> CONFIG_BACKLIGHT_TPS65217=m
> 
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_SOUND=m
> # CONFIG_SOUND_OSS_CORE is not set
> # CONFIG_SND is not set
> # CONFIG_SOUND_PRIME is not set
> 
> #
> # HID support
> #
> # CONFIG_HID is not set
> # CONFIG_USB_ARCH_HAS_OHCI is not set
> # CONFIG_USB_ARCH_HAS_EHCI is not set
> # CONFIG_USB_ARCH_HAS_XHCI is not set
> CONFIG_USB_SUPPORT=y
> # CONFIG_USB_ARCH_HAS_HCD is not set
> CONFIG_USB_HCD_BCMA=m
> CONFIG_USB_HCD_SSB=m
> 
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
> # CONFIG_USB_EZUSB_FX2 is not set
> # CONFIG_OMAP_USB2 is not set
> # CONFIG_USB_GADGET is not set
> 
> #
> # OTG and related infrastructure
> #
> # CONFIG_MMC is not set
> CONFIG_MEMSTICK=m
> # CONFIG_MEMSTICK_DEBUG is not set
> 
> #
> # MemoryStick drivers
> #
> CONFIG_MEMSTICK_UNSAFE_RESUME=y
> # CONFIG_MSPRO_BLOCK is not set
> 
> #
> # MemoryStick Host Controller Drivers
> #
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=m
> 
> #
> # LED drivers
> #
> # CONFIG_LEDS_LM3530 is not set
> # CONFIG_LEDS_LM3642 is not set
> CONFIG_LEDS_PCA9532=m
> CONFIG_LEDS_LP3944=m
> # CONFIG_LEDS_LP5521 is not set
> # CONFIG_LEDS_LP5523 is not set
> CONFIG_LEDS_CLEVO_MAIL=m
> CONFIG_LEDS_PCA955X=m
> CONFIG_LEDS_PCA9633=m
> # CONFIG_LEDS_DA9052 is not set
> # CONFIG_LEDS_DAC124S085 is not set
> CONFIG_LEDS_REGULATOR=m
> CONFIG_LEDS_BD2802=m
> CONFIG_LEDS_MC13783=m
> CONFIG_LEDS_TCA6507=m
> CONFIG_LEDS_LM355x=m
> CONFIG_LEDS_OT200=m
> CONFIG_LEDS_BLINKM=m
> # CONFIG_LEDS_TRIGGERS is not set
> 
> #
> # LED Triggers
> #
> # CONFIG_ACCESSIBILITY is not set
> CONFIG_EDAC=y
> 
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_LEGACY_SYSFS is not set
> CONFIG_EDAC_DEBUG=y
> # CONFIG_EDAC_MM_EDAC is not set
> CONFIG_RTC_LIB=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_HCTOSYS=y
> CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
> CONFIG_RTC_DEBUG=y
> 
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=y
> # CONFIG_RTC_INTF_PROC is not set
> # CONFIG_RTC_INTF_DEV is not set
> # CONFIG_RTC_DRV_TEST is not set
> 
> #
> # I2C RTC drivers
> #
> CONFIG_RTC_DRV_DS1307=m
> CONFIG_RTC_DRV_DS1374=m
> CONFIG_RTC_DRV_DS1672=m
> CONFIG_RTC_DRV_DS3232=m
> # CONFIG_RTC_DRV_MAX6900 is not set
> CONFIG_RTC_DRV_RS5C372=m
> # CONFIG_RTC_DRV_ISL1208 is not set
> # CONFIG_RTC_DRV_ISL12022 is not set
> CONFIG_RTC_DRV_X1205=m
> # CONFIG_RTC_DRV_PCF8563 is not set
> # CONFIG_RTC_DRV_PCF8583 is not set
> CONFIG_RTC_DRV_M41T80=m
> CONFIG_RTC_DRV_M41T80_WDT=y
> # CONFIG_RTC_DRV_BQ32K is not set
> # CONFIG_RTC_DRV_S35390A is not set
> CONFIG_RTC_DRV_FM3130=m
> CONFIG_RTC_DRV_RX8581=m
> CONFIG_RTC_DRV_RX8025=m
> # CONFIG_RTC_DRV_EM3027 is not set
> # CONFIG_RTC_DRV_RV3029C2 is not set
> 
> #
> # SPI RTC drivers
> #
> CONFIG_RTC_DRV_M41T93=m
> # CONFIG_RTC_DRV_M41T94 is not set
> CONFIG_RTC_DRV_DS1305=m
> CONFIG_RTC_DRV_DS1390=m
> # CONFIG_RTC_DRV_MAX6902 is not set
> CONFIG_RTC_DRV_R9701=m
> # CONFIG_RTC_DRV_RS5C348 is not set
> CONFIG_RTC_DRV_DS3234=m
> # CONFIG_RTC_DRV_PCF2123 is not set
> 
> #
> # Platform RTC drivers
> #
> CONFIG_RTC_DRV_CMOS=m
> # CONFIG_RTC_DRV_DS1286 is not set
> # CONFIG_RTC_DRV_DS1511 is not set
> # CONFIG_RTC_DRV_DS1553 is not set
> CONFIG_RTC_DRV_DS1742=m
> CONFIG_RTC_DRV_DA9052=m
> # CONFIG_RTC_DRV_STK17TA8 is not set
> # CONFIG_RTC_DRV_M48T86 is not set
> # CONFIG_RTC_DRV_M48T35 is not set
> # CONFIG_RTC_DRV_M48T59 is not set
> CONFIG_RTC_DRV_MSM6242=m
> CONFIG_RTC_DRV_BQ4802=m
> CONFIG_RTC_DRV_RP5C01=m
> # CONFIG_RTC_DRV_V3020 is not set
> # CONFIG_RTC_DRV_DS2404 is not set
> CONFIG_RTC_DRV_PCF50633=m
> 
> #
> # on-CPU RTC drivers
> #
> CONFIG_RTC_DRV_PCAP=m
> CONFIG_RTC_DRV_MC13XXX=m
> CONFIG_DMADEVICES=y
> # CONFIG_DMADEVICES_DEBUG is not set
> 
> #
> # DMA Devices
> #
> CONFIG_TIMB_DMA=m
> CONFIG_DMA_ENGINE=y
> 
> #
> # DMA Clients
> #
> CONFIG_ASYNC_TX_DMA=y
> CONFIG_DMATEST=m
> CONFIG_AUXDISPLAY=y
> CONFIG_UIO=m
> # CONFIG_UIO_PDRV is not set
> CONFIG_UIO_PDRV_GENIRQ=m
> CONFIG_VIRTIO=m
> 
> #
> # Virtio drivers
> #
> CONFIG_VIRTIO_BALLOON=m
> CONFIG_VIRTIO_MMIO=m
> CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
> 
> #
> # Microsoft Hyper-V guest support
> #
> CONFIG_STAGING=y
> # CONFIG_ECHO is not set
> CONFIG_COMEDI=m
> CONFIG_COMEDI_DEBUG=y
> CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
> CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
> CONFIG_COMEDI_MISC_DRIVERS=y
> CONFIG_COMEDI_KCOMEDILIB=m
> # CONFIG_COMEDI_BOND is not set
> CONFIG_COMEDI_TEST=m
> CONFIG_COMEDI_PARPORT=m
> CONFIG_COMEDI_SERIAL2002=m
> CONFIG_COMEDI_SKEL=m
> # CONFIG_COMEDI_8255 is not set
> CONFIG_COMEDI_FC=m
> # CONFIG_ZSMALLOC is not set
> # CONFIG_FT1000 is not set
> 
> #
> # Speakup console speech
> #
> CONFIG_SPEAKUP=m
> # CONFIG_SPEAKUP_SYNTH_ACNTSA is not set
> # CONFIG_SPEAKUP_SYNTH_ACNTPC is not set
> CONFIG_SPEAKUP_SYNTH_APOLLO=m
> CONFIG_SPEAKUP_SYNTH_AUDPTR=m
> CONFIG_SPEAKUP_SYNTH_BNS=m
> # CONFIG_SPEAKUP_SYNTH_DECTLK is not set
> CONFIG_SPEAKUP_SYNTH_DECEXT=m
> CONFIG_SPEAKUP_SYNTH_DECPC=m
> # CONFIG_SPEAKUP_SYNTH_DTLK is not set
> CONFIG_SPEAKUP_SYNTH_KEYPC=m
> CONFIG_SPEAKUP_SYNTH_LTLK=m
> CONFIG_SPEAKUP_SYNTH_SOFT=m
> CONFIG_SPEAKUP_SYNTH_SPKOUT=m
> CONFIG_SPEAKUP_SYNTH_TXPRT=m
> CONFIG_SPEAKUP_SYNTH_DUMMY=m
> # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
> # CONFIG_STAGING_MEDIA is not set
> 
> #
> # Android
> #
> # CONFIG_ANDROID is not set
> CONFIG_PHONE=m
> CONFIG_IPACK_BUS=m
> # CONFIG_SERIAL_IPOCTAL is not set
> CONFIG_DGRP=m
> CONFIG_X86_PLATFORM_DEVICES=y
> CONFIG_SENSORS_HDAPS=m
> CONFIG_SAMSUNG_LAPTOP=m
> CONFIG_SAMSUNG_Q10=m
> 
> #
> # Hardware Spinlock drivers
> #
> CONFIG_CLKEVT_I8253=y
> CONFIG_I8253_LOCK=y
> CONFIG_CLKBLD_I8253=y
> # CONFIG_IOMMU_SUPPORT is not set
> 
> #
> # Remoteproc drivers (EXPERIMENTAL)
> #
> # CONFIG_STE_MODEM_RPROC is not set
> 
> #
> # Rpmsg drivers (EXPERIMENTAL)
> #
> # CONFIG_VIRT_DRIVERS is not set
> # CONFIG_PM_DEVFREQ is not set
> CONFIG_EXTCON=y
> 
> #
> # Extcon Device Drivers
> #
> CONFIG_EXTCON_ARIZONA=m
> # CONFIG_MEMORY is not set
> # CONFIG_IIO is not set
> # CONFIG_PWM is not set
> 
> #
> # Firmware Drivers
> #
> CONFIG_EDD=m
> CONFIG_EDD_OFF=y
> CONFIG_FIRMWARE_MEMMAP=y
> CONFIG_DELL_RBU=m
> # CONFIG_DCDBAS is not set
> # CONFIG_DMIID is not set
> # CONFIG_DMI_SYSFS is not set
> # CONFIG_ISCSI_IBFT_FIND is not set
> # CONFIG_GOOGLE_FIRMWARE is not set
> 
> #
> # File systems
> #
> CONFIG_DCACHE_WORD_ACCESS=y
> CONFIG_EXT2_FS=m
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT2_FS_XIP=y
> CONFIG_EXT3_FS=m
> CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
> # CONFIG_EXT3_FS_XATTR is not set
> # CONFIG_EXT4_FS is not set
> CONFIG_FS_XIP=y
> CONFIG_JBD=m
> CONFIG_JBD_DEBUG=y
> CONFIG_FS_MBCACHE=m
> # CONFIG_REISERFS_FS is not set
> CONFIG_JFS_FS=m
> CONFIG_JFS_POSIX_ACL=y
> CONFIG_JFS_SECURITY=y
> # CONFIG_JFS_DEBUG is not set
> # CONFIG_JFS_STATISTICS is not set
> CONFIG_XFS_FS=m
> CONFIG_XFS_QUOTA=y
> CONFIG_XFS_POSIX_ACL=y
> CONFIG_XFS_RT=y
> # CONFIG_XFS_DEBUG is not set
> # CONFIG_GFS2_FS is not set
> CONFIG_BTRFS_FS=m
> # CONFIG_BTRFS_FS_POSIX_ACL is not set
> # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
> CONFIG_NILFS2_FS=m
> CONFIG_FS_POSIX_ACL=y
> CONFIG_EXPORTFS=y
> CONFIG_FILE_LOCKING=y
> # CONFIG_FSNOTIFY is not set
> # CONFIG_DNOTIFY is not set
> # CONFIG_INOTIFY_USER is not set
> # CONFIG_FANOTIFY is not set
> CONFIG_QUOTA=y
> CONFIG_PRINT_QUOTA_WARNING=y
> # CONFIG_QUOTA_DEBUG is not set
> CONFIG_QFMT_V1=m
> # CONFIG_QFMT_V2 is not set
> CONFIG_QUOTACTL=y
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_FUSE_FS is not set
> 
> #
> # Caches
> #
> # CONFIG_FSCACHE is not set
> 
> #
> # CD-ROM/DVD Filesystems
> #
> # CONFIG_ISO9660_FS is not set
> CONFIG_UDF_FS=m
> CONFIG_UDF_NLS=y
> 
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=m
> # CONFIG_MSDOS_FS is not set
> CONFIG_VFAT_FS=m
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_DEBUG is not set
> CONFIG_NTFS_RW=y
> 
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> # CONFIG_PROC_KCORE is not set
> CONFIG_PROC_VMCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> # CONFIG_TMPFS_POSIX_ACL is not set
> # CONFIG_TMPFS_XATTR is not set
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_CONFIGFS_FS=m
> CONFIG_MISC_FILESYSTEMS=y
> CONFIG_ADFS_FS=m
> # CONFIG_ADFS_FS_RW is not set
> CONFIG_AFFS_FS=m
> CONFIG_ECRYPT_FS=m
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> CONFIG_BFS_FS=m
> CONFIG_EFS_FS=m
> # CONFIG_JFFS2_FS is not set
> # CONFIG_LOGFS is not set
> CONFIG_CRAMFS=m
> CONFIG_SQUASHFS=m
> CONFIG_SQUASHFS_XATTR=y
> # CONFIG_SQUASHFS_ZLIB is not set
> CONFIG_SQUASHFS_LZO=y
> CONFIG_SQUASHFS_XZ=y
> CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
> # CONFIG_SQUASHFS_EMBEDDED is not set
> CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> # CONFIG_VXFS_FS is not set
> CONFIG_MINIX_FS=m
> CONFIG_OMFS_FS=m
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_QNX6FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_PSTORE is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> # CONFIG_NLS_CODEPAGE_437 is not set
> CONFIG_NLS_CODEPAGE_737=m
> CONFIG_NLS_CODEPAGE_775=m
> # CONFIG_NLS_CODEPAGE_850 is not set
> CONFIG_NLS_CODEPAGE_852=m
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> # CONFIG_NLS_CODEPAGE_862 is not set
> CONFIG_NLS_CODEPAGE_863=m
> CONFIG_NLS_CODEPAGE_864=m
> CONFIG_NLS_CODEPAGE_865=m
> CONFIG_NLS_CODEPAGE_866=m
> CONFIG_NLS_CODEPAGE_869=m
> # CONFIG_NLS_CODEPAGE_936 is not set
> CONFIG_NLS_CODEPAGE_950=m
> CONFIG_NLS_CODEPAGE_932=m
> CONFIG_NLS_CODEPAGE_949=m
> # CONFIG_NLS_CODEPAGE_874 is not set
> CONFIG_NLS_ISO8859_8=m
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ASCII is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> CONFIG_NLS_ISO8859_3=m
> CONFIG_NLS_ISO8859_4=m
> CONFIG_NLS_ISO8859_5=m
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> CONFIG_NLS_ISO8859_14=m
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> CONFIG_NLS_KOI8_U=m
> # CONFIG_NLS_MAC_ROMAN is not set
> # CONFIG_NLS_MAC_CELTIC is not set
> CONFIG_NLS_MAC_CENTEURO=m
> CONFIG_NLS_MAC_CROATIAN=m
> CONFIG_NLS_MAC_CYRILLIC=m
> CONFIG_NLS_MAC_GAELIC=m
> # CONFIG_NLS_MAC_GREEK is not set
> # CONFIG_NLS_MAC_ICELAND is not set
> # CONFIG_NLS_MAC_INUIT is not set
> # CONFIG_NLS_MAC_ROMANIAN is not set
> CONFIG_NLS_MAC_TURKISH=m
> # CONFIG_NLS_UTF8 is not set
> 
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> # CONFIG_PRINTK_TIME is not set
> CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
> # CONFIG_ENABLE_WARN_DEPRECATED is not set
> # CONFIG_ENABLE_MUST_CHECK is not set
> CONFIG_FRAME_WARN=2048
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_STRIP_ASM_SYMS=y
> # CONFIG_UNUSED_SYMBOLS is not set
> CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> # CONFIG_DEBUG_SECTION_MISMATCH is not set
> # CONFIG_DEBUG_KERNEL is not set
> # CONFIG_PANIC_ON_OOPS is not set
> CONFIG_PANIC_ON_OOPS_VALUE=0
> # CONFIG_SLUB_DEBUG_ON is not set
> # CONFIG_SLUB_STATS is not set
> CONFIG_HAVE_DEBUG_KMEMLEAK=y
> # CONFIG_SPARSE_RCU_POINTER is not set
> CONFIG_TRACE_IRQFLAGS=y
> CONFIG_STACKTRACE=y
> CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_DEBUG_MEMORY_INIT=y
> CONFIG_ARCH_WANT_FRAME_POINTERS=y
> CONFIG_FRAME_POINTER=y
> CONFIG_RCU_CPU_STALL_TIMEOUT=60
> # CONFIG_RCU_CPU_STALL_VERBOSE is not set
> # CONFIG_LKDTM is not set
> CONFIG_USER_STACKTRACE_SUPPORT=y
> CONFIG_NOP_TRACER=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
> CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> CONFIG_HAVE_FENTRY=y
> CONFIG_HAVE_C_RECORDMCOUNT=y
> CONFIG_TRACER_MAX_TRACE=y
> CONFIG_TRACE_CLOCK=y
> CONFIG_RING_BUFFER=y
> CONFIG_EVENT_TRACING=y
> CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
> CONFIG_CONTEXT_SWITCH_TRACER=y
> CONFIG_RING_BUFFER_ALLOW_SWAP=y
> CONFIG_TRACING=y
> CONFIG_GENERIC_TRACER=y
> CONFIG_TRACING_SUPPORT=y
> CONFIG_FTRACE=y
> # CONFIG_FUNCTION_TRACER is not set
> CONFIG_IRQSOFF_TRACER=y
> # CONFIG_PREEMPT_TRACER is not set
> CONFIG_SCHED_TRACER=y
> CONFIG_FTRACE_SYSCALLS=y
> CONFIG_BRANCH_PROFILE_NONE=y
> # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
> # CONFIG_PROFILE_ALL_BRANCHES is not set
> # CONFIG_STACK_TRACER is not set
> # CONFIG_BLK_DEV_IO_TRACE is not set
> # CONFIG_UPROBE_EVENT is not set
> # CONFIG_PROBE_EVENTS is not set
> # CONFIG_FTRACE_STARTUP_TEST is not set
> CONFIG_RING_BUFFER_BENCHMARK=m
> # CONFIG_DYNAMIC_DEBUG is not set
> CONFIG_DMA_API_DEBUG=y
> CONFIG_ATOMIC64_SELFTEST=y
> CONFIG_SAMPLES=y
> # CONFIG_SAMPLE_TRACEPOINTS is not set
> # CONFIG_SAMPLE_TRACE_EVENTS is not set
> # CONFIG_SAMPLE_KOBJECT is not set
> CONFIG_SAMPLE_HW_BREAKPOINT=m
> # CONFIG_SAMPLE_KFIFO is not set
> CONFIG_HAVE_ARCH_KGDB=y
> CONFIG_HAVE_ARCH_KMEMCHECK=y
> # CONFIG_TEST_KSTRTOX is not set
> # CONFIG_STRICT_DEVMEM is not set
> CONFIG_X86_VERBOSE_BOOTUP=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_DEBUG_SET_MODULE_RONX=y
> CONFIG_IOMMU_STRESS=y
> CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> CONFIG_IO_DELAY_0X80=y
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEFAULT_IO_DELAY_TYPE=0
> # CONFIG_OPTIMIZE_INLINING is not set
> 
> #
> # Security options
> #
> CONFIG_KEYS=y
> CONFIG_TRUSTED_KEYS=m
> # CONFIG_ENCRYPTED_KEYS is not set
> # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
> CONFIG_SECURITY_DMESG_RESTRICT=y
> CONFIG_SECURITY=y
> CONFIG_SECURITYFS=y
> # CONFIG_SECURITY_NETWORK is not set
> CONFIG_SECURITY_PATH=y
> CONFIG_SECURITY_YAMA=y
> # CONFIG_SECURITY_YAMA_STACKED is not set
> # CONFIG_IMA is not set
> CONFIG_DEFAULT_SECURITY_YAMA=y
> # CONFIG_DEFAULT_SECURITY_DAC is not set
> CONFIG_DEFAULT_SECURITY="yama"
> CONFIG_CRYPTO=y
> 
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD=m
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_BLKCIPHER=m
> CONFIG_CRYPTO_BLKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG=m
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_PCOMP=m
> CONFIG_CRYPTO_PCOMP2=y
> CONFIG_CRYPTO_MANAGER=m
> CONFIG_CRYPTO_MANAGER2=y
> CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> CONFIG_CRYPTO_GF128MUL=m
> CONFIG_CRYPTO_NULL=m
> CONFIG_CRYPTO_PCRYPT=m
> CONFIG_CRYPTO_WORKQUEUE=y
> CONFIG_CRYPTO_CRYPTD=m
> CONFIG_CRYPTO_AUTHENC=m
> # CONFIG_CRYPTO_TEST is not set
> CONFIG_CRYPTO_ABLK_HELPER_X86=m
> CONFIG_CRYPTO_GLUE_HELPER_X86=m
> 
> #
> # Authenticated Encryption with Associated Data
> #
> # CONFIG_CRYPTO_CCM is not set
> # CONFIG_CRYPTO_GCM is not set
> CONFIG_CRYPTO_SEQIV=m
> 
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=m
> CONFIG_CRYPTO_CTR=m
> CONFIG_CRYPTO_CTS=m
> CONFIG_CRYPTO_ECB=m
> CONFIG_CRYPTO_LRW=m
> # CONFIG_CRYPTO_PCBC is not set
> CONFIG_CRYPTO_XTS=m
> 
> #
> # Hash modes
> #
> CONFIG_CRYPTO_HMAC=m
> CONFIG_CRYPTO_XCBC=m
> # CONFIG_CRYPTO_VMAC is not set
> 
> #
> # Digest
> #
> CONFIG_CRYPTO_CRC32C=m
> # CONFIG_CRYPTO_CRC32C_INTEL is not set
> # CONFIG_CRYPTO_GHASH is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=m
> # CONFIG_CRYPTO_MICHAEL_MIC is not set
> # CONFIG_CRYPTO_RMD128 is not set
> # CONFIG_CRYPTO_RMD160 is not set
> CONFIG_CRYPTO_RMD256=m
> # CONFIG_CRYPTO_RMD320 is not set
> CONFIG_CRYPTO_SHA1=m
> # CONFIG_CRYPTO_SHA1_SSSE3 is not set
> CONFIG_CRYPTO_SHA256=m
> CONFIG_CRYPTO_SHA512=y
> CONFIG_CRYPTO_TGR192=m
> # CONFIG_CRYPTO_WP512 is not set
> CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
> 
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=m
> CONFIG_CRYPTO_AES_X86_64=m
> CONFIG_CRYPTO_AES_NI_INTEL=m
> CONFIG_CRYPTO_ANUBIS=m
> # CONFIG_CRYPTO_ARC4 is not set
> # CONFIG_CRYPTO_BLOWFISH is not set
> CONFIG_CRYPTO_BLOWFISH_COMMON=m
> CONFIG_CRYPTO_BLOWFISH_X86_64=m
> CONFIG_CRYPTO_CAMELLIA=m
> CONFIG_CRYPTO_CAMELLIA_X86_64=m
> # CONFIG_CRYPTO_CAST5 is not set
> # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
> CONFIG_CRYPTO_CAST6=m
> CONFIG_CRYPTO_CAST6_AVX_X86_64=m
> # CONFIG_CRYPTO_DES is not set
> CONFIG_CRYPTO_FCRYPT=m
> CONFIG_CRYPTO_KHAZAD=m
> # CONFIG_CRYPTO_SALSA20 is not set
> # CONFIG_CRYPTO_SALSA20_X86_64 is not set
> CONFIG_CRYPTO_SEED=m
> CONFIG_CRYPTO_SERPENT=m
> # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
> # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
> # CONFIG_CRYPTO_TEA is not set
> # CONFIG_CRYPTO_TWOFISH is not set
> # CONFIG_CRYPTO_TWOFISH_X86_64 is not set
> # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
> # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
> 
> #
> # Compression
> #
> # CONFIG_CRYPTO_DEFLATE is not set
> CONFIG_CRYPTO_ZLIB=m
> CONFIG_CRYPTO_LZO=m
> 
> #
> # Random Number Generation
> #
> CONFIG_CRYPTO_ANSI_CPRNG=m
> # CONFIG_CRYPTO_HW is not set
> CONFIG_ASYMMETRIC_KEY_TYPE=y
> CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
> CONFIG_PUBLIC_KEY_ALGO_RSA=y
> CONFIG_X509_CERTIFICATE_PARSER=y
> CONFIG_HAVE_KVM=y
> CONFIG_VIRTUALIZATION=y
> CONFIG_BINARY_PRINTF=y
> 
> #
> # Library routines
> #
> CONFIG_BITREVERSE=m
> CONFIG_GENERIC_STRNCPY_FROM_USER=y
> CONFIG_GENERIC_STRNLEN_USER=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_GENERIC_PCI_IOMAP=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_IO=y
> # CONFIG_CRC_CCITT is not set
> CONFIG_CRC16=m
> CONFIG_CRC_T10DIF=m
> CONFIG_CRC_ITU_T=m
> CONFIG_CRC32=m
> CONFIG_CRC32_SELFTEST=y
> # CONFIG_CRC32_SLICEBY8 is not set
> # CONFIG_CRC32_SLICEBY4 is not set
> # CONFIG_CRC32_SARWATE is not set
> CONFIG_CRC32_BIT=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=m
> CONFIG_CRC8=m
> CONFIG_ZLIB_INFLATE=m
> CONFIG_ZLIB_DEFLATE=m
> CONFIG_LZO_COMPRESS=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_XZ_DEC=m
> CONFIG_XZ_DEC_X86=y
> CONFIG_XZ_DEC_POWERPC=y
> CONFIG_XZ_DEC_IA64=y
> CONFIG_XZ_DEC_ARM=y
> CONFIG_XZ_DEC_ARMTHUMB=y
> CONFIG_XZ_DEC_SPARC=y
> CONFIG_XZ_DEC_BCJ=y
> CONFIG_XZ_DEC_TEST=m
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> CONFIG_NLATTR=y
> CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
> # CONFIG_AVERAGE is not set
> CONFIG_CLZ_TAB=y
> CONFIG_CORDIC=m
> CONFIG_DDR=y
> CONFIG_MPILIB=y
> CONFIG_OID_REGISTRY=y
> 
> 

Kernel panic

[Stefan Beller]

Hello,

so I tested v3.7-rc7-163-g3c46f3d and got a kernel panic.
Usually I am running Ubuntu on my Dell Latitutde E6520,
which usually works fine except some sound issues.

I did this:

git clone https://github.com/torvalds/linux.git
cd linux
make deb-pkg
cd ..
dpkg -i linux-headers-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
dpkg -i linux-image-3.7.0-rc7+_3.7.0-rc7+-3_amd64.deb
dpkg -i linux-libc-dev_3.7.0-rc7+-3_amd64.deb

Rebooting yields a panic, 
see panic stack trace and .config below

How would I help further fixing this issue?

---------------------------------
the screen reads:
---------------------------------
early console in decompress_kernel

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
drivers/rtc/hctosyys.c: unable to open rtc device (rtc0)
Kernel panic - not syncing: VFS Unable to mount root fs on unknown-block(0,0)
Pid: 1, com: swapper/0 Not tainted 3.7.0-rc7+ #3
Call Trace:
 [<ffffffff8127a2c3>] panic+0x11a/0x2b3
 [<ffffffff8147d42e>] mount_block_root+0x375/0x39a
 [<ffffffff8147d4bf>] mount_root+0x6c/0x77
 [<ffffffff8147d68b>] prepare_namespace+0x1c1/0x203
 [<ffffffff8106aeb3>] ? release_tgcred.isra.8+0x3c/0x3c
 [<ffffffff812750b5>] kernel_init+0x2ae/0x433
 [<ffffffff8147c5f8>] ? loglevel+0x46/0x46
 [<ffffffff81274e07>] ? rest_init+0xd3/0xd3
 [<ffffffff812832bc>] ret_from_fork+0x7c/0xb0
 [<ffffffff81274e07>] ? rest_init+0xd3/0xd3

---------------------------------
.config
---------------------------------

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.7.0-rc6 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_FHANDLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_GENERIC_KERNEL_THREAD=y
CONFIG_GENERIC_KERNEL_EXECVE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_RCU_USER_QS=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_RELA=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
CONFIG_MODULE_SIG_SHA384=y
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_MCE_INJECT is not set
CONFIG_I8K=m
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
# CONFIG_PCI is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_PCCARD is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# CONFIG_IA32_EMULATION is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
# CONFIG_NET is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y

#
# Bus devices
#
CONFIG_OMAP_OCP2SCP=m
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=m
# CONFIG_MTD_OOPS is not set
CONFIG_MTD_SWAP=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
CONFIG_MTD_ICHXROM=m
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=m
CONFIG_MTD_PLATRAM=m
# CONFIG_MTD_LATCH_ADDR is not set

#
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DATAFLASH_OTP is not set
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SST25L=m
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_AD525X_DPOT_SPI is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=m
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_C2PORT=m
# CONFIG_C2PORT_DURAMAR_2150 is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_SPI=m
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_STMPE=m
CONFIG_KEYBOARD_OMAP4=m
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=m
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=m
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TABLET=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_N_HDLC is not set
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
# CONFIG_DEVKMEM is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_NVRAM=m
CONFIG_R3964=m
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_I2C_INFINEON=m
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TELCLOCK is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=m
CONFIG_SPI_DESIGNWARE=m

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=m
CONFIG_HDQ_MASTER_OMAP=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2423=m
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=m
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2780=m
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27x00=m
# CONFIG_BATTERY_BQ27X00_I2C is not set
CONFIG_BATTERY_BQ27X00_PLATFORM=y
# CONFIG_BATTERY_DA9052 is not set
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_PCF50633=m
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_SMB347 is not set
CONFIG_POWER_AVS=y
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7410=m
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=m
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9052_ADC=m
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
CONFIG_SENSORS_ADS1015=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_MC13783_ADC is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
# CONFIG_CPU_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_DA9052_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SC520_WDT=m
# CONFIG_SBC_FITPC2_WATCHDOG is not set
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_IT8712F_WDT=m
# CONFIG_IT87_WDT is not set
# CONFIG_SC1200_WDT is not set
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_DEBUG=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=m
CONFIG_HTC_PASIC3=m
# CONFIG_MFD_LM3533 is not set
CONFIG_TPS6105X=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65217=m
CONFIG_MFD_STMPE=y

#
# STMPE Interface Drivers
#
CONFIG_STMPE_SPI=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_ARIZONA=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_ARIZONA_SPI=m
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM831X_SPI is not set
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
CONFIG_EZX_PCAP=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ARIZONA=m
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_MAX1586=m
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_PCAP is not set
CONFIG_REGULATOR_LP3971=m
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_PCF50633 is not set
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS62360=m
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=m
# CONFIG_REGULATOR_TPS65217 is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_RC_SUPPORT is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set

#
# Media drivers
#

#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SI470X=y
CONFIG_I2C_SI470X=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
# CONFIG_RADIO_TEA5764 is not set
CONFIG_RADIO_SAA7706H=m
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#

#
# Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=m
# CONFIG_VIDEO_WM8775 is not set
CONFIG_VIDEO_WM8739=m
# CONFIG_VIDEO_VP27SMPX is not set

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
CONFIG_VIDEO_ADV7393=m
# CONFIG_VIDEO_AK881X is not set

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
# CONFIG_VIDEO_UPD64083 is not set

#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set

#
# Sensors used on soc_camera driver
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=m
# CONFIG_MEDIA_TUNER_MC44S803 is not set
# CONFIG_MEDIA_TUNER_MAX2165 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
# CONFIG_MEDIA_TUNER_TDA18212 is not set
CONFIG_MEDIA_TUNER_E4000=m
# CONFIG_MEDIA_TUNER_FC2580 is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set

#
# Customise DVB Frontends
#
# CONFIG_DVB_AU8522_V4L is not set
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m

#
# Graphics support
#
CONFIG_DRM=m
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_S6E63M0=m
CONFIG_LCD_LD9040=m
CONFIG_LCD_AMS369FG06=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_DA9052=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=m
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_TPS65217=m

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
# CONFIG_HID is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_XHCI is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_OMAP_USB2 is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA9633=m
# CONFIG_LEDS_DA9052 is not set
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_TRIGGERS is not set

#
# LED Triggers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
# CONFIG_RTC_DRV_M41T94 is not set
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=m
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_DS3234=m
# CONFIG_RTC_DRV_PCF2123 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DA9052=m
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
CONFIG_RTC_DRV_PCF50633=m

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PCAP=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_TIMB_DMA=m
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_AUXDISPLAY=y
CONFIG_UIO=m
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_VIRTIO=m

#
# Virtio drivers
#
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y

#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_ECHO is not set
CONFIG_COMEDI=m
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_KCOMEDILIB=m
# CONFIG_COMEDI_BOND is not set
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_SERIAL2002=m
CONFIG_COMEDI_SKEL=m
# CONFIG_COMEDI_8255 is not set
CONFIG_COMEDI_FC=m
# CONFIG_ZSMALLOC is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
CONFIG_SPEAKUP=m
# CONFIG_SPEAKUP_SYNTH_ACNTSA is not set
# CONFIG_SPEAKUP_SYNTH_ACNTPC is not set
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
# CONFIG_SPEAKUP_SYNTH_DECTLK is not set
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_DECPC=m
# CONFIG_SPEAKUP_SYNTH_DTLK is not set
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_PHONE=m
CONFIG_IPACK_BUS=m
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_DGRP=m
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_SENSORS_HDAPS=m
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers (EXPERIMENTAL)
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ARIZONA=m
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QFMT_V1=m
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
# CONFIG_JFFS2_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
# CONFIG_SQUASHFS_ZLIB is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=m
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=m
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
# CONFIG_LKDTM is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACEPOINTS is not set
# CONFIG_SAMPLE_TRACE_EVENTS is not set
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_SAMPLE_HW_BREAKPOINT=m
# CONFIG_SAMPLE_KFIFO is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_YAMA_STACKED is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_YAMA=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="yama"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER_X86=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=m
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=m
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y

Kernel panic

[Ron Murray]

[-- Attachment #1: Type: text/plain, Size: 6279 bytes --]


System Events
=-=-=-=-=-=-=
Jan 19 06:43:22 curly kernel: BUG: unable to handle kernel NULL pointer 
dereference at 0000000000000028
Jan 19 06:43:22 curly kernel: IP: [<ffffffff810ca594>] 
dentry_lru_prune+0x22/0x49
Jan 19 06:43:22 curly kernel: PGD 79079067 PUD 337e1067 PMD 0
Jan 19 06:43:22 curly kernel: Oops: 0000 [#1] PREEMPT SMP
Jan 19 06:43:22 curly kernel: CPU 1
Jan 19 06:43:22 curly kernel: Modules linked in: pci_stub vboxpci(O) 
vboxnetadp(O) vboxnetflt(O) vboxdrv(O) i915 drm_kms_helper bnep rfcomm 
bluetooth uinput act_police cls_basic cls_flow cls_fw cls_u32 sch_tbf 
sch_prio sch_hfsc sch_htb sch_ingress sch_sfq bridge stp llc 
xt_connlimit xt_realm xt_addrtype ip_set_hash_ip xt_comment ipt_ULOG 
xt_recent ipt_REJECT ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE ipt_ECN 
ipt_ecn ipt_CLUSTERIP ipt_ah ip6_queue nf_nat_tftp nf_nat_sip 
nf_nat_pptp nf_nat_proto_gre nf_nat_irc xt_set nf_nat_h323 nf_nat_ftp 
nf_nat_amanda nf_conntrack_tftp nf_conntrack_sane nf_conntrack_sip 
nf_conntrack_proto_udplite nf_conntrack_proto_sctp nf_conntrack_pptp 
nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_netbios_ns 
nf_conntrack_broadcast ts_kmp nf_conntrack_irc nf_conntrack_amanda 
nf_conntrack_h323 nf_conntrack_ftp xt_time xt_TCPMSS xt_sctp xt_TPROXY 
nf_tproxy_core xt_policy xt_tcpmss xt_pkttype xt_physdev xt_owner 
xt_NFQUEUE xt_NFLOG nfnetlink_log xt_multiport xt_mark xt_mac xt_limit 
xt_leng
Jan 19 06:43:22 curly kernel: th xt_iprange xt_helper xt_hashlimit 
xt_DSCP xt_dscp xt_dccp xt_connmark xt_CLASSIFY ip6t_LOG ip6t_REJECT 
ipt_LOG xt_state ip_set_hash_net ip_set nfnetlink fuse nfsd nfs lockd 
auth_rpcgss nfs_acl sunrpc nf_conntrack_ipv6 nf_defrag_ipv6 
ip6table_mangle ip6table_raw ip6table_filter ip6_tables xt_tcpudp ipv6 
xt_conntrack iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 
nf_conntrack nf_defrag_ipv4 iptable_raw iptable_filter ip_tables 
x_tables configfs smsc47b397 coretemp loop dm_crypt joydev gspca_spca500 
gspca_main usbhid videodev v4l2_compat_ioctl32 hid snd_hda_codec_realtek 
tpm_infineon snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss 
snd_pcm snd_seq_dummy uhci_hcd snd_seq_oss e1000e snd_seq_midi hp_wmi 
psmouse sparse_keymap evdev serio_raw snd_rawmidi tpm_tis ehci_hcd 
pcspkr tpm snd_seq_midi_event snd_seq usbcore wmi iTCO_wdt floppy 
snd_timer tpm_bios snd_seq_device snd usb_common soundcore 
snd_page_alloc processor dm_mirror dm_region_hash dm_log dm_mod 
ata_generic sr_mod cdro
Jan 19 06:43:22 curly kernel: m
Jan 19 06:43:22 curly kernel:
Jan 19 06:43:22 curly kernel: Pid: 360, comm: kswapd0 Tainted: G 
W  O 3.2.1-curly-0 #1 Hewlett-Packard HP Compaq dc7700 Small Form 
Factor/0A54h
Jan 19 06:43:22 curly kernel: RIP: 0010:[<ffffffff810ca594>] 
[<ffffffff810ca594>] dentry_lru_prune+0x22/0x49
Jan 19 06:43:22 curly kernel: RSP: 0018:ffff880079be7bf0  EFLAGS: 00010202
Jan 19 06:43:22 curly kernel: RAX: 0000000000000000 RBX: 
ffff880041e85cc0 RCX: 0000000000002b2a
Jan 19 06:43:22 curly kernel: RDX: 0000000000002a2a RSI: 
0000000000000000 RDI: ffff880041e85cc0
Jan 19 06:43:22 curly kernel: RBP: ffff880079be7c00 R08: 
0000000000000000 R09: ffff88007dd10740
Jan 19 06:43:22 curly kernel: R10: ffff88007dd10740 R11: 
ffff88007dd10740 R12: ffff880017021600
Jan 19 06:43:22 curly kernel: R13: ffff8800620afd80 R14: 
0000000000000000 R15: ffff880018d8705c
Jan 19 06:43:22 curly kernel: FS:  0000000000000000(0000) 
GS:ffff88007dd00000(0000) knlGS:0000000000000000
Jan 19 06:43:22 curly kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 
000000008005003b
Jan 19 06:43:22 curly kernel: CR2: 0000000000000028 CR3: 
0000000013c41000 CR4: 00000000000006e0
Jan 19 06:43:22 curly kernel: DR0: 0000000000000000 DR1: 
0000000000000000 DR2: 0000000000000000
Jan 19 06:43:22 curly kernel: DR3: 0000000000000000 DR6: 
00000000ffff0ff0 DR7: 0000000000000400
Jan 19 06:43:22 curly kernel: Process kswapd0 (pid: 360, threadinfo 
ffff880079be6000, task ffff88007a9c1e50)
Jan 19 06:43:22 curly kernel: Stack:
Jan 19 06:43:22 curly kernel: 0000000000000001 ffff880041e85cc0 
ffff880079be7c30 ffffffff810cb3ba
Jan 19 06:43:22 curly kernel: ffff880041e85cc0 ffff880079be7cb0 
ffff880041e85d40 ffff880041e85d1c
Jan 19 06:43:22 curly kernel: ffff880079be7c80 ffffffff810cb4f8 
ffff880079be7c50 ffff88006fac9d80
Jan 19 06:43:22 curly kernel: Call Trace:
Jan 19 06:43:22 curly kernel: [<ffffffff810cb3ba>] dentry_kill+0x7f/0x14a
Jan 19 06:43:22 curly kernel: [<ffffffff810cb4f8>] 
shrink_dentry_list+0x73/0xcf
Jan 19 06:43:22 curly kernel: [<ffffffff810cb6ad>] 
__shrink_dcache_sb+0x159/0x168
Jan 19 06:43:22 curly kernel: [<ffffffff810cbfed>] prune_dcache_sb+0xe/0x10
Jan 19 06:43:22 curly kernel: [<ffffffff810bd18d>] prune_super+0xd4/0x14f
Jan 19 06:43:22 curly kernel: [<ffffffff8108caa4>] shrink_slab+0x11a/0x195
Jan 19 06:43:22 curly kernel: [<ffffffff8108efb2>] kswapd+0x4e9/0x793
Jan 19 06:43:22 curly kernel: [<ffffffff81047ecd>] ? 
add_wait_queue+0x44/0x44
Jan 19 06:43:22 curly kernel: [<ffffffff8108eac9>] ? 
try_to_free_pages+0x3ca/0x3ca
Jan 19 06:43:22 curly kernel: [<ffffffff81047853>] kthread+0x7f/0x87
Jan 19 06:43:22 curly kernel: [<ffffffff81390d34>] 
kernel_thread_helper+0x4/0x10
Jan 19 06:43:22 curly kernel: [<ffffffff810477d4>] ? 
kthread_worker_fn+0x141/0x141
Jan 19 06:43:22 curly kernel: [<ffffffff81390d30>] ? gs_change+0xb/0xb
Jan 19 06:43:22 curly kernel: Code: 1a 4a 2c 00 41 5b 5b 5d c3 55 48 89 
e5 53 48 89 fb 50 48 8d 87 80 00 00 00 48 39 87 80 00 00 00 74 2c f6 07 
10 74 07 48 8b 47 60 <ff> 50 28 48 c7 c7 00 04 4f 81 e8 55 47 2c 00 48 
89 df e8 8a fd
Jan 19 06:43:22 curly kernel: RIP  [<ffffffff810ca594>] 
dentry_lru_prune+0x22/0x49
Jan 19 06:43:22 curly kernel: RSP <ffff880079be7bf0>
Jan 19 06:43:22 curly kernel: CR2: 0000000000000028
Jan 19 06:43:22 curly kernel: ---[ end trace a7919e7f17c0a729 ]---
Jan 19 06:43:22 curly kernel: note: kswapd0[360] exited with preempt_count 3


**********************************************************************
This email and any files transmitted with it are confidential and 
intended solely for the use of the individual or entity to whom they   
are addressed. If you have received this email in error please notify 
the system manager at postmaster at dor.state.ma.us.
**********************************************************************

[-- Attachment #2: Attached Message Part --]
[-- Type: text/plain, Size: 0 bytes --]

Re: kernel panic

[Thomas Renninger]

On Friday 28 October 2011 04:13:50 Thomas Renninger wrote:
...
> Ah, maybe an older acpidump got used and the _CST method of the
> object is in a not exported, dynamically loaded SSDT.
> This is very likely.
> 
> Please use a very recent acpidump:
> Hm, Len's ftp directory on kernel.org where latest acpidump was
> located is gone?
I've put a (hopefully) recent acpidump source here:
ftp.suse.com/pub/people/trenn/acpidump
Should get available in an hour or so.

I expect you see:
"Dynamic OEM Table Load"
message(s) in dmesg and the SSDT which includes the ACPI parts which are
causing this is loaded at runtime. Older acpidump versions were not able
to extract these, the one I put on my ftp account should be able to.

Can you run it and put the output somewhere (related Ubuntu bug?) and
provide a pointer to it, please.
Hm, you could create a bug here:
http://acpica.org/bugzilla
It looks like ACPI code in the _CST function is triggering an ACPICA
interpreter memory bug when it tries to evaluate the func (guessing...).

    Thomas

Re: kernel panic

[Thomas Renninger]

On Wednesday 26 October 2011 20:10:07 Bjorn Helgaas wrote:
> On Wed, Oct 26, 2011 at 11:11 AM, nick bray <nick.bray1@ntlworld.com> wrote:
...
> ...
> Brought up 2 CPUs
> ...
> ACPI: Power Button [PWRF]
> BUG: unable to handle kernel paging request at 00010282
> IP: [<00010282>] 0x10281
> *pde = 00000000
> Oops: 0000 [#1] SMP
> ...
> Pid: 1, comm: swapper Not tainted 3.0.0-12-generic #20-Ubuntu
> EIP: 0060:[<00010282>] EFLAGS: 00010282 CPU: 1
> ...
>   ? resched_task+0x22/0x70
>   ? __kmalloc+0x189/0x1e0
>   acpi_ns_evaluate+0x3a/0x18d
>   acpi_evaluate_object+0xd6/0x1c5
>   ? try_to_wake_up+0x140/0x190
>   acpi_processor_get_power_info_cst+0x53/0x297
>   ? wait_for_completion+0x17/0x20
>   ? default_spin_lock_flags+0x8/0x10
>   ? _raw_spin_lock+0xd/0x10
>   ? task_rq_lock+0x49/0x80
>   ? set_cpus_allowed_ptr+0x53/0x110
>   ? acpi_processor_get_throttling_fadt+0x72/0x7a
>   acpi_processor_get_power_info+0x24/0x10c
>   acpi_processor_power_init+0xdc/0x10c
>   acpi_processor_add+0x131/0x1d2
>   acpi_device_probe+0x41/0xf5
> 
> I found a report with a serial console log showing a very similar
> backtrace here:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/807164
> 
> Seems pretty clearly related to acpi_processor_get_power_info();
> hopefully an expert in that area will jump in and help out.
This is really strange..., it happens when trying to evaluate
_CST on a processor object.
But processor objects are declared:
    Scope (\_PR)
    {
        Processor (CPU1, 0x01, 0x00000410, 0x06) {}
        Processor (CPU2, 0x02, 0x00000410, 0x06) {}
    }
and do not have a _CST func. I got the DSDT from the Ubuntu
bug, you may want to double check:
acpidump >acpidump
acpixtract -a acpidump
iasl *.dat
grep _CST *.dsl

If you have a processor object with _CST function you could
try to reproduce this in userspace by using acpiexec from the
acpica utilities.
acpiexec DSDT.dat
-> methods shows you the available ones
-> execute \_PR.CPU1._CST (or similar possibly triggers some mem corruption?)

Ah, maybe an older acpidump got used and the _CST method of the
object is in a not exported, dynamically loaded SSDT.
This is very likely.

Please use a very recent acpidump:
Hm, Len's ftp directory on kernel.org where latest acpidump was
located is gone?
Latest openSUSE acpica package has everything mentioned above included :)
Could get a problem to feed acpiexec with the DSDT and SSDT.., you may
have to glue them (better ask again then). Best is you run it with valgrind.
bugzilla.kernel.org is still down?

   Thomas

Re: kernel panic

[Bjorn Helgaas]

On Wed, Oct 26, 2011 at 11:11 AM, nick bray <nick.bray1@ntlworld.com> wrote:
> On 26/10/11 17:18, Bjorn Helgaas wrote:
>>
>> On Wed, Oct 26, 2011 at 9:33 AM, nick bray<nick.bray1@ntlworld.com>
>>  wrote:
>>>
>>> On 26/10/11 15:53, Bjorn Helgaas wrote:
>>>>
>>>> On Wed, Oct 26, 2011 at 4:00 AM, Len Brown<lenb417@gmail.com>    wrote:
>>>>>>>
>>>>>>>  after upgrading to linux kernel 3.xx I get kernel panic on boot
>>>>>>> unless
>>>>>>> I
>>>>>>> use ACPI=off in the boot parameters this happens with both Ubuntu
>>>>>>> 11.10
>>>>>>> and
>>>>>>> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4
>>>>>>> 3ghz
>>>>>>> with
>>>>>>> 3gig RAM in single-channel mode. I have performed a Bios upgrade just
>>>>>>> in
>>>>>>> case tha ACPI tables were corrupt but it makes no difference.
>>>>>>> Currently
>>>>>>> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues.
>>>>>
>>>>> Is this problem new in 3.1, or is it also present in 2.6.39 or 3.0?
>>>>>
>>>>> Also, do any other cmdline parmaters besides acpi=off work-around it?
>>>>> pci=noacpi
>>>>> maxcpus=1
>>>>>
>>>>> etc.
>>>>
>>>> Please keep all the cc's when responding.  Saves you work, saves us work
>>>> :)
>>>>
>>>> Summary of what I think you're seeing (please correct if wrong):
>>>>
>>>> 2.6.38 (Ubuntu/Mint): works fine, even with no boot args
>>>> 2.6.38 (Fedora 15): works fine, even with no boot args
>>>> 2.6.40? (Fedora 15 with upgraded kernel): requires "acpi=off" to boot
>>>> 3.0.0-12 (Ubuntu/Mint): requires "acpi=off" or "maxcpus=1" to boot.
>>>> "pci=noacpi" makes no difference.  with no arguments, panics as in
>>>> attached screenshot.
>>>> 3.1.0-0.rc6 (Fedora 16 live CD): can't find root device, drops to
>>>> debug shell, even with "maxcpus=1"
>>>>
>>>> Let's focus on Ubuntu and forget Fedora for now.
>>>>
>>>> The screenshot you sent (attached) has a clue ("EIP: [<00000000>] 0x0
>>>> SS:ESP 007b:00000046 CR2: 00000000ffffffff, Fatal exception in
>>>> interrupt") but doesn't really have enough context.  I should have
>>>> suggested booting with "vga=0xf07".  That will use a smaller font, so
>>>> the photo can capture more information.  Can you try that?  You might
>>>> have to use a lower jpg quality setting or resave with gimp at a low
>>>> quality setting to make the size 100K or less for the mailing lists.
>>>>
>>>> If you can boot 3.0.0-12 with "maxcpus=1", collect the dmesg log and
>>>> maybe we can compare it with the new "vga=0xf07" screenshot.
>>>
>>>            your summary is correct. Please see new screenshot taken with
>>> a
>>> better camera with the light off! Also I have resized it to>100k  Though
>>> I
>>> can't see a difference in the txt size even though I used vga=0xf07. also
>>> attached dmesg from Ubuntu 11.10 with maxcpus=1. Thank you for the time
>>> and
>>> interest. :)
>>
>> Please use reply-all... it saves work for everybody!
>>
>> Dunno why vga= doesn't do anything.  But this panic is different from
>> the first (and probably more useful).  Looks like this problem might
>> be in the acpi_processor_add() path, which might explain why
>> "maxcpus=1" makes a difference.
>>
>> I added cc: to a few people who have recently changed the ACPI processor
>> driver.
>>
>> Are you able to build test kernels yourself?  If so, you could
>> sprinkle printks() in acpi_processor_add(), maybe with some
>> mdelay(100) calls to slow things down.
>>
>> There's also a "boot_delay=" parameter that supposedly slows down boot
>> printks.  I haven't had much luck with it myself, but "boot_delay=100"
>> or so might allow you to get more snapshots of the beginning of the
>> stacktrace.
>>
>> Bjorn
>
> ok reply all it is, I'm sorry I've never needed to report something like
> this before. I've been using Linux now for around 10 years and consider
> myself reasonably competent at configuration and suchlike but never
> successfully built a kernel (I'm not a coder/programmer), something tells me
> that now is probably not a good time to try. ;)
>
> anyway here is a whole bunch of jpegs taken with boot_delay=100 I'm afraid
> they're not contiguous as some of they were too blurred to bother sending. I
> hope the info is useful.

Perfect, thanks!  Manual transcription of the interesting parts:

...
Brought up 2 CPUs
...
ACPI: Power Button [PWRF]
BUG: unable to handle kernel paging request at 00010282
IP: [<00010282>] 0x10281
*pde = 00000000
Oops: 0000 [#1] SMP
...
Pid: 1, comm: swapper Not tainted 3.0.0-12-generic #20-Ubuntu
EIP: 0060:[<00010282>] EFLAGS: 00010282 CPU: 1
...
  ? resched_task+0x22/0x70
  ? __kmalloc+0x189/0x1e0
  acpi_ns_evaluate+0x3a/0x18d
  acpi_evaluate_object+0xd6/0x1c5
  ? try_to_wake_up+0x140/0x190
  acpi_processor_get_power_info_cst+0x53/0x297
  ? wait_for_completion+0x17/0x20
  ? default_spin_lock_flags+0x8/0x10
  ? _raw_spin_lock+0xd/0x10
  ? task_rq_lock+0x49/0x80
  ? set_cpus_allowed_ptr+0x53/0x110
  ? acpi_processor_get_throttling_fadt+0x72/0x7a
  acpi_processor_get_power_info+0x24/0x10c
  acpi_processor_power_init+0xdc/0x10c
  acpi_processor_add+0x131/0x1d2
  acpi_device_probe+0x41/0xf5

I found a report with a serial console log showing a very similar
backtrace here:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/807164

Seems pretty clearly related to acpi_processor_get_power_info();
hopefully an expert in that area will jump in and help out.

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: kernel panic

[Bjorn Helgaas]

On Wed, Oct 26, 2011 at 11:11 AM, nick bray <nick.bray1@ntlworld.com> wrote:
> On 26/10/11 17:18, Bjorn Helgaas wrote:
>>
>> On Wed, Oct 26, 2011 at 9:33 AM, nick bray<nick.bray1@ntlworld.com>
>>  wrote:
>>>
>>> On 26/10/11 15:53, Bjorn Helgaas wrote:
>>>>
>>>> On Wed, Oct 26, 2011 at 4:00 AM, Len Brown<lenb417@gmail.com>    wrote:
>>>>>>>
>>>>>>>  after upgrading to linux kernel 3.xx I get kernel panic on boot
>>>>>>> unless
>>>>>>> I
>>>>>>> use ACPI=off in the boot parameters this happens with both Ubuntu
>>>>>>> 11.10
>>>>>>> and
>>>>>>> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4
>>>>>>> 3ghz
>>>>>>> with
>>>>>>> 3gig RAM in single-channel mode. I have performed a Bios upgrade just
>>>>>>> in
>>>>>>> case tha ACPI tables were corrupt but it makes no difference.
>>>>>>> Currently
>>>>>>> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues.
>>>>>
>>>>> Is this problem new in 3.1, or is it also present in 2.6.39 or 3.0?
>>>>>
>>>>> Also, do any other cmdline parmaters besides acpi=off work-around it?
>>>>> pci=noacpi
>>>>> maxcpus=1
>>>>>
>>>>> etc.
>>>>
>>>> Please keep all the cc's when responding.  Saves you work, saves us work
>>>> :)
>>>>
>>>> Summary of what I think you're seeing (please correct if wrong):
>>>>
>>>> 2.6.38 (Ubuntu/Mint): works fine, even with no boot args
>>>> 2.6.38 (Fedora 15): works fine, even with no boot args
>>>> 2.6.40? (Fedora 15 with upgraded kernel): requires "acpi=off" to boot
>>>> 3.0.0-12 (Ubuntu/Mint): requires "acpi=off" or "maxcpus=1" to boot.
>>>> "pci=noacpi" makes no difference.  with no arguments, panics as in
>>>> attached screenshot.
>>>> 3.1.0-0.rc6 (Fedora 16 live CD): can't find root device, drops to
>>>> debug shell, even with "maxcpus=1"
>>>>
>>>> Let's focus on Ubuntu and forget Fedora for now.
>>>>
>>>> The screenshot you sent (attached) has a clue ("EIP: [<00000000>] 0x0
>>>> SS:ESP 007b:00000046 CR2: 00000000ffffffff, Fatal exception in
>>>> interrupt") but doesn't really have enough context.  I should have
>>>> suggested booting with "vga=0xf07".  That will use a smaller font, so
>>>> the photo can capture more information.  Can you try that?  You might
>>>> have to use a lower jpg quality setting or resave with gimp at a low
>>>> quality setting to make the size 100K or less for the mailing lists.
>>>>
>>>> If you can boot 3.0.0-12 with "maxcpus=1", collect the dmesg log and
>>>> maybe we can compare it with the new "vga=0xf07" screenshot.
>>>
>>>            your summary is correct. Please see new screenshot taken with
>>> a
>>> better camera with the light off! Also I have resized it to>100k  Though
>>> I
>>> can't see a difference in the txt size even though I used vga=0xf07. also
>>> attached dmesg from Ubuntu 11.10 with maxcpus=1. Thank you for the time
>>> and
>>> interest. :)
>>
>> Please use reply-all... it saves work for everybody!
>>
>> Dunno why vga= doesn't do anything.  But this panic is different from
>> the first (and probably more useful).  Looks like this problem might
>> be in the acpi_processor_add() path, which might explain why
>> "maxcpus=1" makes a difference.
>>
>> I added cc: to a few people who have recently changed the ACPI processor
>> driver.
>>
>> Are you able to build test kernels yourself?  If so, you could
>> sprinkle printks() in acpi_processor_add(), maybe with some
>> mdelay(100) calls to slow things down.
>>
>> There's also a "boot_delay=" parameter that supposedly slows down boot
>> printks.  I haven't had much luck with it myself, but "boot_delay=100"
>> or so might allow you to get more snapshots of the beginning of the
>> stacktrace.
>>
>> Bjorn
>
> ok reply all it is, I'm sorry I've never needed to report something like
> this before. I've been using Linux now for around 10 years and consider
> myself reasonably competent at configuration and suchlike but never
> successfully built a kernel (I'm not a coder/programmer), something tells me
> that now is probably not a good time to try. ;)
>
> anyway here is a whole bunch of jpegs taken with boot_delay=100 I'm afraid
> they're not contiguous as some of they were too blurred to bother sending. I
> hope the info is useful.

Perfect, thanks!  Manual transcription of the interesting parts:

...
Brought up 2 CPUs
...
ACPI: Power Button [PWRF]
BUG: unable to handle kernel paging request at 00010282
IP: [<00010282>] 0x10281
*pde = 00000000
Oops: 0000 [#1] SMP
...
Pid: 1, comm: swapper Not tainted 3.0.0-12-generic #20-Ubuntu
EIP: 0060:[<00010282>] EFLAGS: 00010282 CPU: 1
...
  ? resched_task+0x22/0x70
  ? __kmalloc+0x189/0x1e0
  acpi_ns_evaluate+0x3a/0x18d
  acpi_evaluate_object+0xd6/0x1c5
  ? try_to_wake_up+0x140/0x190
  acpi_processor_get_power_info_cst+0x53/0x297
  ? wait_for_completion+0x17/0x20
  ? default_spin_lock_flags+0x8/0x10
  ? _raw_spin_lock+0xd/0x10
  ? task_rq_lock+0x49/0x80
  ? set_cpus_allowed_ptr+0x53/0x110
  ? acpi_processor_get_throttling_fadt+0x72/0x7a
  acpi_processor_get_power_info+0x24/0x10c
  acpi_processor_power_init+0xdc/0x10c
  acpi_processor_add+0x131/0x1d2
  acpi_device_probe+0x41/0xf5

I found a report with a serial console log showing a very similar
backtrace here:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/807164

Seems pretty clearly related to acpi_processor_get_power_info();
hopefully an expert in that area will jump in and help out.

Bjorn

Re: kernel panic

[Bjorn Helgaas]

[-- Attachment #1: Type: text/plain, Size: 3379 bytes --]

On Wed, Oct 26, 2011 at 9:33 AM, nick bray <nick.bray1@ntlworld.com> wrote:
> On 26/10/11 15:53, Bjorn Helgaas wrote:
>>
>> On Wed, Oct 26, 2011 at 4:00 AM, Len Brown<lenb417@gmail.com>  wrote:
>>>>>
>>>>>  after upgrading to linux kernel 3.xx I get kernel panic on boot unless
>>>>> I
>>>>> use ACPI=off in the boot parameters this happens with both Ubuntu 11.10
>>>>> and
>>>>> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4 3ghz
>>>>> with
>>>>> 3gig RAM in single-channel mode. I have performed a Bios upgrade just
>>>>> in
>>>>> case tha ACPI tables were corrupt but it makes no difference. Currently
>>>>> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues.
>>>
>>> Is this problem new in 3.1, or is it also present in 2.6.39 or 3.0?
>>>
>>> Also, do any other cmdline parmaters besides acpi=off work-around it?
>>> pci=noacpi
>>> maxcpus=1
>>>
>>> etc.
>>
>> Please keep all the cc's when responding.  Saves you work, saves us work
>> :)
>>
>> Summary of what I think you're seeing (please correct if wrong):
>>
>> 2.6.38 (Ubuntu/Mint): works fine, even with no boot args
>> 2.6.38 (Fedora 15): works fine, even with no boot args
>> 2.6.40? (Fedora 15 with upgraded kernel): requires "acpi=off" to boot
>> 3.0.0-12 (Ubuntu/Mint): requires "acpi=off" or "maxcpus=1" to boot.
>> "pci=noacpi" makes no difference.  with no arguments, panics as in
>> attached screenshot.
>> 3.1.0-0.rc6 (Fedora 16 live CD): can't find root device, drops to
>> debug shell, even with "maxcpus=1"
>>
>> Let's focus on Ubuntu and forget Fedora for now.
>>
>> The screenshot you sent (attached) has a clue ("EIP: [<00000000>] 0x0
>> SS:ESP 007b:00000046 CR2: 00000000ffffffff, Fatal exception in
>> interrupt") but doesn't really have enough context.  I should have
>> suggested booting with "vga=0xf07".  That will use a smaller font, so
>> the photo can capture more information.  Can you try that?  You might
>> have to use a lower jpg quality setting or resave with gimp at a low
>> quality setting to make the size 100K or less for the mailing lists.
>>
>> If you can boot 3.0.0-12 with "maxcpus=1", collect the dmesg log and
>> maybe we can compare it with the new "vga=0xf07" screenshot.

>            your summary is correct. Please see new screenshot taken with a
> better camera with the light off! Also I have resized it to >100k  Though I
> can't see a difference in the txt size even though I used vga=0xf07. also
> attached dmesg from Ubuntu 11.10 with maxcpus=1. Thank you for the time and
> interest. :)

Please use reply-all... it saves work for everybody!

Dunno why vga= doesn't do anything.  But this panic is different from
the first (and probably more useful).  Looks like this problem might
be in the acpi_processor_add() path, which might explain why
"maxcpus=1" makes a difference.

I added cc: to a few people who have recently changed the ACPI processor driver.

Are you able to build test kernels yourself?  If so, you could
sprinkle printks() in acpi_processor_add(), maybe with some
mdelay(100) calls to slow things down.

There's also a "boot_delay=" parameter that supposedly slows down boot
printks.  I haven't had much luck with it myself, but "boot_delay=100"
or so might allow you to get more snapshots of the beginning of the
stacktrace.

Bjorn

[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 42083 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-12-generic (buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bfe30000 (usable)
[    0.000000]  BIOS-e820: 00000000bfe30000 - 00000000bfe414a0 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfe414a0 - 00000000bff30000 (usable)
[    0.000000]  BIOS-e820: 00000000bff30000 - 00000000bff40000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bff40000 - 00000000bfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI 2.3 present.
[    0.000000] DMI:                  /S875WP1                        , BIOS WP87510A.86B.0059.P18.0502071117 02/07/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xbff30 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 365f2000 - 372f1000
[    0.000000] ACPI: RSDP 000f61a0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT bff30000 00030 (v01 INTEL  S875PWP4 20050207 MSFT 00000097)
[    0.000000] ACPI: FACP bff30200 00081 (v02 INTEL  S875PWP4 20050207 MSFT 00000097)
[    0.000000] ACPI: DSDT bff30370 0424E (v01 INTEL  S875PWP4 00000001 MSFT 0100000D)
[    0.000000] ACPI: FACS bff40000 00040
[    0.000000] ACPI: APIC bff30300 00068 (v01 INTEL  S875PWP4 20050207 MSFT 00000097)
[    0.000000] ACPI: WDDT bff345c0 00040 (v01 INTEL  OEMWDDT  00000001 MSFT 0100000D)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2183MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000bff30
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bfe30
[    0.000000]     0: 0x000bfe42 -> 0x000bff30
[    0.000000] On node 0 totalpages: 786093
[    0.000000] free_area_init_node: node 0, pgdat c17b11c0, node_mem_map f4df2200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4367 pages used for memmap
[    0.000000]   HighMem zone: 554513 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ecf0000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f4800000 s26240 r0 d22912 u2097152
[    0.000000] pcpu-alloc: s26240 r0 d22912 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 779950
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=ebc3e8ab-b14f-4d4c-921a-a24fc1938f69 ro quiet splash vt.handoff=7 maxcpus=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 12579328 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:000bff30)
[    0.000000] Memory: 3083696k/3144896k available (5329k kernel code, 60676k reserved, 2589k data, 696k init, 2235520k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc17bc000 - 0xc186a000   ( 696 kB)
[    0.000000]       .data : 0xc1534784 - 0xc17bbd80   (2589 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1534784   (5329 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f3808000 soft=f380a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2992.511 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.02 BogoMIPS (lpj=11970044)
[    0.004010] pid_max: default: 32768 minimum: 301
[    0.004040] Security Framework initialized
[    0.004069] AppArmor: AppArmor initialized
[    0.004072] Yama: becoming mindful.
[    0.004145] Mount-cache hash table entries: 512
[    0.004351] Initializing cgroup subsys cpuacct
[    0.004359] Initializing cgroup subsys memory
[    0.004370] Initializing cgroup subsys devices
[    0.004374] Initializing cgroup subsys freezer
[    0.004377] Initializing cgroup subsys net_cls
[    0.004380] Initializing cgroup subsys blkio
[    0.004392] Initializing cgroup subsys perf_event
[    0.004436] CPU: Physical Processor ID: 0
[    0.004439] CPU: Processor Core ID: 0
[    0.004443] mce: CPU supports 4 MCE banks
[    0.004455] CPU0: Thermal monitoring enabled (TM1)
[    0.004689] SMP alternatives: switching to UP code
[    0.015719] ACPI: Core revision 20110413
[    0.018384] ftrace: allocating 24885 entries in 49 pages
[    0.020100] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062626] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[    0.064003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.064003] ... version:                0
[    0.064003] ... bit width:              40
[    0.064003] ... generic registers:      18
[    0.064003] ... value mask:             000000ffffffffff
[    0.064003] ... max period:             0000007fffffffff
[    0.064003] ... fixed-purpose events:   0
[    0.064003] ... event mask:             000000000003ffff
[    0.064003] Brought up 1 CPUs
[    0.064003] Total of 1 processors activated (5985.02 BogoMIPS).
[    0.064003] devtmpfs: initialized
[    0.064003] PM: Registering ACPI NVS region at bfe30000 (70816 bytes)
[    0.064003] PM: Registering ACPI NVS region at bff40000 (720896 bytes)
[    0.064003] print_constraints: dummy: 
[    0.064003] Time: 15:10:30  Date: 10/26/11
[    0.064034] NET: Registered protocol family 16
[    0.064179] EISA bus registered
[    0.064191] ACPI: bus type pci registered
[    0.065577] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[    0.065579] PCI: Using configuration type 1 for base access
[    0.066812] bio: create slab <bio-0> at 0
[    0.067768] ACPI: EC: Look up EC in DSDT
[    0.068873] ACPI: Executed 2 blocks of module-level executable AML code
[    0.071125] ACPI: Interpreter enabled
[    0.071133] ACPI: (supports S0 S1 S3 S4 S5)
[    0.071160] ACPI: Using IOAPIC for interrupt routing
[    0.075149] ACPI: Power Resource [URP1] (off)
[    0.075199] ACPI: Power Resource [URP2] (off)
[    0.075248] ACPI: Power Resource [FDDP] (off)
[    0.075296] ACPI: Power Resource [LPTP] (off)
[    0.077167] ACPI: No dock devices found.
[    0.077171] HEST: Table not found.
[    0.077177] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.077259] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.077417] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.077421] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.077424] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.077428] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
[    0.077446] pci 0000:00:00.0: [8086:2578] type 0 class 0x000600
[    0.077451] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.077459] pci 0000:00:00.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
[    0.077511] pci 0000:00:01.0: [8086:2579] type 1 class 0x000604
[    0.077544] pci 0000:00:03.0: [8086:257b] type 1 class 0x000604
[    0.077576] pci 0000:00:06.0: [8086:257e] type 0 class 0x000880
[    0.077586] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[    0.077655] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[    0.077696] pci 0000:00:1d.0: reg 20: [io  0xcc00-0xcc1f]
[    0.077728] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[    0.077769] pci 0000:00:1d.1: reg 20: [io  0xd000-0xd01f]
[    0.077801] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[    0.077842] pci 0000:00:1d.2: reg 20: [io  0xd400-0xd41f]
[    0.077873] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[    0.077914] pci 0000:00:1d.3: reg 20: [io  0xd800-0xd81f]
[    0.077955] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[    0.077977] pci 0000:00:1d.7: reg 10: [mem 0xfebffc00-0xfebfffff]
[    0.078053] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.078059] pci 0000:00:1d.7: PME# disabled
[    0.078076] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.078117] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[    0.078177] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.078196] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
[    0.078209] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.078219] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.078229] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.078238] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.078248] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
[    0.078258] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.078287] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101
[    0.078299] pci 0000:00:1f.2: reg 10: [io  0xec00-0xec07]
[    0.078308] pci 0000:00:1f.2: reg 14: [io  0xe800-0xe803]
[    0.078317] pci 0000:00:1f.2: reg 18: [io  0xe400-0xe407]
[    0.078325] pci 0000:00:1f.2: reg 1c: [io  0xe000-0xe003]
[    0.078334] pci 0000:00:1f.2: reg 20: [io  0xdc00-0xdc0f]
[    0.078364] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[    0.078405] pci 0000:00:1f.3: reg 20: [io  0xc800-0xc81f]
[    0.078453] pci 0000:01:00.0: [10de:00f3] type 0 class 0x000300
[    0.078472] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.078483] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref]
[    0.078493] pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfcffffff]
[    0.078524] pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref]
[    0.078576] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.078580] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.078585] pci 0000:00:01.0:   bridge window [mem 0xfa800000-0xfe8fffff]
[    0.078589] pci 0000:00:01.0:   bridge window [mem 0xd2700000-0xf26fffff pref]
[    0.078609] pci 0000:02:01.0: [8086:1019] type 0 class 0x000200
[    0.078624] pci 0000:02:01.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
[    0.078638] pci 0000:02:01.0: reg 18: [io  0xac00-0xac1f]
[    0.078675] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[    0.078680] pci 0000:02:01.0: PME# disabled
[    0.078711] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[    0.078715] pci 0000:00:03.0:   bridge window [io  0xa000-0xafff]
[    0.078719] pci 0000:00:03.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.078724] pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.078745] pci 0000:03:02.0: [1057:1801] type 0 class 0x000480
[    0.078757] pci 0000:03:02.0: reg 10: [mem 0xfeaf0000-0xfeafffff]
[    0.078818] pci 0000:03:08.0: [8086:1050] type 0 class 0x000200
[    0.078833] pci 0000:03:08.0: reg 10: [mem 0xfeaef000-0xfeaeffff]
[    0.078842] pci 0000:03:08.0: reg 14: [io  0xbc00-0xbc3f]
[    0.078889] pci 0000:03:08.0: supports D1 D2
[    0.078891] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.078896] pci 0000:03:08.0: PME# disabled
[    0.078926] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.078931] pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
[    0.078936] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.078941] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.078944] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.078947] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.078961] pci_bus 0000:00: on NUMA node 0
[    0.078965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.079032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.079077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.079111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.079252]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.082047] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.082127] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.082205] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.082281] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.082359] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.082436] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.082514] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.082593] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.082738] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.082743] vgaarb: loaded
[    0.082744] vgaarb: bridge control possible 0000:01:00.0
[    0.083038] SCSI subsystem initialized
[    0.083127] libata version 3.00 loaded.
[    0.083191] usbcore: registered new interface driver usbfs
[    0.083207] usbcore: registered new interface driver hub
[    0.083242] usbcore: registered new device driver usb
[    0.083360] PCI: Using ACPI for IRQ routing
[    0.083367] PCI: pci_cache_line_size set to 64 bytes
[    0.083435] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.083439] reserve RAM buffer: 00000000bfe30000 - 00000000bfffffff 
[    0.083442] reserve RAM buffer: 00000000bff30000 - 00000000bfffffff 
[    0.083566] NetLabel: Initializing
[    0.083569] NetLabel:  domain hash size = 128
[    0.083571] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.083585] NetLabel:  unlabeled traffic allowed by default
[    0.083734] hpet clockevent registered
[    0.083739] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.083744] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.083749] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.088062] Switching to clocksource hpet
[    0.091969] Switched to NOHz mode on CPU #0
[    0.096454] AppArmor: AppArmor Filesystem Enabled
[    0.096499] pnp: PnP ACPI init
[    0.096523] ACPI: bus type pnp registered
[    0.096650] pnp 00:00: [bus 00-ff]
[    0.096654] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.096657] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.096659] pnp 00:00: [io  0x0d00-0xffff window]
[    0.096662] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.096665] pnp 00:00: [mem 0x00000000 window]
[    0.096668] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[    0.096737] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.096789] pnp 00:01: [dma 4]
[    0.096792] pnp 00:01: [io  0x0000-0x000f]
[    0.096794] pnp 00:01: [io  0x0081-0x0083]
[    0.096797] pnp 00:01: [io  0x0087]
[    0.096799] pnp 00:01: [io  0x0089-0x008b]
[    0.096801] pnp 00:01: [io  0x008f]
[    0.096804] pnp 00:01: [io  0x00c0-0x00df]
[    0.096835] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.096854] pnp 00:02: [io  0x0070-0x0071]
[    0.096871] pnp 00:02: [irq 8]
[    0.096903] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.096948] pnp 00:03: [io  0x0060]
[    0.096951] pnp 00:03: [io  0x0064]
[    0.096956] pnp 00:03: [irq 1]
[    0.096990] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.097146] pnp 00:04: [io  0x0061]
[    0.097182] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.097195] pnp 00:05: [io  0x00f0-0x00ff]
[    0.097202] pnp 00:05: [irq 13]
[    0.097237] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.097326] pnp 00:06: [io  0x03f0-0x03f1]
[    0.097329] pnp 00:06: [io  0x03f2-0x03f3]
[    0.097331] pnp 00:06: [io  0x03f4-0x03f5]
[    0.097334] pnp 00:06: [io  0x03f7]
[    0.097339] pnp 00:06: [irq 6]
[    0.097342] pnp 00:06: [dma 2]
[    0.097404] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.097615] pnp 00:07: [io  0x03f8-0x03ff]
[    0.097622] pnp 00:07: [irq 4]
[    0.097704] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.097913] pnp 00:08: [io  0x02f8-0x02ff]
[    0.097920] pnp 00:08: [irq 3]
[    0.098001] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.098247] pnp 00:09: [io  0x0378-0x037f]
[    0.098253] pnp 00:09: [irq 7]
[    0.098322] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.098393] pnp 00:0a: [io  0x0010-0x001f]
[    0.098396] pnp 00:0a: [io  0x0022-0x003f]
[    0.098399] pnp 00:0a: [io  0x0044-0x005f]
[    0.098401] pnp 00:0a: [io  0x0062-0x0063]
[    0.098404] pnp 00:0a: [io  0x0065-0x006f]
[    0.098406] pnp 00:0a: [io  0x0072-0x007f]
[    0.098408] pnp 00:0a: [io  0x0080]
[    0.098411] pnp 00:0a: [io  0x0084-0x0086]
[    0.098413] pnp 00:0a: [io  0x0088]
[    0.098415] pnp 00:0a: [io  0x008c-0x008e]
[    0.098421] pnp 00:0a: [io  0x0090-0x009f]
[    0.098424] pnp 00:0a: [io  0x00a2-0x00bf]
[    0.098426] pnp 00:0a: [io  0x00e0-0x00ef]
[    0.098428] pnp 00:0a: [io  0x04d0-0x04d1]
[    0.098498] system 00:0a: [io  0x04d0-0x04d1] has been reserved
[    0.098503] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.098574] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[    0.098577] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[    0.098613] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[    0.098799] pnp 00:0c: [io  0x0400-0x047f]
[    0.098803] pnp 00:0c: [io  0x0000-0xffffffff disabled]
[    0.098806] pnp 00:0c: [io  0x0680-0x06ff]
[    0.098808] pnp 00:0c: [io  0x0500-0x053f]
[    0.098811] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.098813] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[    0.098816] pnp 00:0c: [mem 0xfed20000-0xfed9ffff]
[    0.098868] system 00:0c: [io  0x0400-0x047f] has been reserved
[    0.098873] system 00:0c: [io  0x0680-0x06ff] has been reserved
[    0.098876] system 00:0c: [io  0x0500-0x053f] has been reserved
[    0.098880] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.098883] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.098886] system 00:0c: [mem 0xfed20000-0xfed9ffff] has been reserved
[    0.098890] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.099120] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.099124] pnp 00:0d: [mem 0x000c0000-0x000dffff]
[    0.099127] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[    0.099129] pnp 00:0d: [mem 0x00100000-0xbfffffff]
[    0.099132] pnp 00:0d: [mem 0x00000000-0xffffffff disabled]
[    0.099187] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.099192] system 00:0d: [mem 0x000c0000-0x000dffff] could not be reserved
[    0.099195] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.099198] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.099202] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.099420] pnp: PnP ACPI: found 14 devices
[    0.099423] ACPI: ACPI bus type pnp unregistered
[    0.099428] PnPBIOS: Disabled by ACPI PNP
[    0.136161] PCI: max bus depth: 1 pci_try_num: 2
[    0.136187] pci 0000:00:1f.1: BAR 5: assigned [mem 0xc0000000-0xc00003ff]
[    0.136194] pci 0000:00:1f.1: BAR 5: set to [mem 0xc0000000-0xc00003ff] (PCI address [0xc0000000-0xc00003ff])
[    0.136198] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.136201] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.136207] pci 0000:00:01.0:   bridge window [mem 0xfa800000-0xfe8fffff]
[    0.136212] pci 0000:00:01.0:   bridge window [mem 0xd2700000-0xf26fffff pref]
[    0.136218] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[    0.136221] pci 0000:00:03.0:   bridge window [io  0xa000-0xafff]
[    0.136226] pci 0000:00:03.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.136230] pci 0000:00:03.0:   bridge window [mem pref disabled]
[    0.136236] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.136240] pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
[    0.136245] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.136250] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.136271] pci 0000:00:1e.0: setting latency timer to 64
[    0.136275] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.136278] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.136281] pci_bus 0000:01: resource 1 [mem 0xfa800000-0xfe8fffff]
[    0.136284] pci_bus 0000:01: resource 2 [mem 0xd2700000-0xf26fffff pref]
[    0.136287] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.136290] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.136293] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    0.136296] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.136299] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
[    0.136301] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[    0.136353] NET: Registered protocol family 2
[    0.136429] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.136771] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.137663] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.138231] TCP: Hash tables configured (established 131072 bind 65536)
[    0.138236] TCP reno registered
[    0.138245] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.138267] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.138430] NET: Registered protocol family 1
[    0.138572] pci 0000:01:00.0: Boot video device
[    0.138590] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
[    0.138597] PCI: CLS 64 bytes, default 64
[    0.139004] audit: initializing netlink socket (disabled)
[    0.139019] type=2000 audit(1319641830.132:1): initialized
[    0.158257] Trying to unpack rootfs image as initramfs...
[    0.200114] highmem bounce pool size: 64 pages
[    0.200123] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.236276] VFS: Disk quotas dquot_6.5.2
[    0.236364] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.244230] fuse init (API version 7.16)
[    0.244394] msgmni has been set to 1656
[    0.252306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.256246] io scheduler noop registered
[    0.256250] io scheduler deadline registered
[    0.256299] io scheduler cfq registered (default)
[    0.256496] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.256538] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.256706] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[    0.256716] ACPI: Sleep Button [SLPB]
[    0.256769] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.256774] ACPI: Power Button [PWRF]
[    0.256804] ACPI: acpi_idle registered with cpuidle
[    0.258559] ERST: Table is not found!
[    0.258724] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.279073] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.279108] isapnp: Scanning for PnP cards...
[    0.412511] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.453920] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.492683] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.560624] Linux agpgart interface v0.103
[    0.560742] agpgart-intel 0000:00:00.0: Intel i875 Chipset
[    0.562918] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[    0.564453] brd: module loaded
[    0.565165] loop: module loaded
[    0.565377] ata_piix 0000:00:1f.1: version 2.13
[    0.565391] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.565414] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.565473] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.568140] scsi0 : ata_piix
[    0.572129] scsi1 : ata_piix
[    0.573322] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.573326] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.573410] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.573417] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.573473] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.573892] scsi2 : ata_piix
[    0.574077] scsi3 : ata_piix
[    0.575019] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[    0.575023] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[    0.575501] Fixed MDIO Bus: probed
[    0.575537] PPP generic driver version 2.4.2
[    0.575632] tun: Universal TUN/TAP device driver, 1.6
[    0.575635] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.575749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.575789] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.575814] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.575819] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.575874] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.575910] ehci_hcd 0000:00:1d.7: debug port 1
[    0.579787] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.584286] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[    0.643872] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.728608] hub 1-0:1.0: USB hub found
[    0.728617] hub 1-0:1.0: 8 ports detected
[    0.728720] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.728742] uhci_hcd: USB Universal Host Controller Interface driver
[    0.728822] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.728833] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.728838] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.728913] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.728953] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[    0.729113] hub 2-0:1.0: USB hub found
[    0.729120] hub 2-0:1.0: 2 ports detected
[    0.729200] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.729208] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.729211] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.729262] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.729300] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[    0.729448] hub 3-0:1.0: USB hub found
[    0.729453] hub 3-0:1.0: 2 ports detected
[    0.729517] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.729526] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.729529] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.729579] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.729604] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[    0.729750] hub 4-0:1.0: USB hub found
[    0.729755] hub 4-0:1.0: 2 ports detected
[    0.729827] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.729835] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.729838] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.729885] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.729908] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[    0.730055] hub 5-0:1.0: USB hub found
[    0.730060] hub 5-0:1.0: 2 ports detected
[    0.730194] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.730197] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.730971] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.731073] mousedev: PS/2 mouse device common for all mice
[    0.731212] rtc_cmos 00:02: RTC can wake from S4
[    0.731319] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.731343] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.731488] device-mapper: uevent: version 1.0.3
[    0.731589] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    0.731628] EISA: Probing bus 0 at eisa.0
[    0.731663] EISA: Detected 0 cards.
[    0.731679] cpufreq-nforce2: No nForce2 chipset.
[    0.731683] cpuidle: using governor ladder
[    0.731685] cpuidle: using governor menu
[    0.731687] EFI Variables Facility v0.08 2004-May-17
[    0.732369] ata2.00: ATAPI: PIONEER DVD-RW  DVR-115D, 1.13, max UDMA/66
[    0.736506] TCP cubic registered
[    0.736547] ata1.00: ATA-7: SAMSUNG HD300LD, WK100-12, max UDMA/100
[    0.736551] ata1.00: 586072368 sectors, multi 16: LBA48 
[    0.737040] NET: Registered protocol family 10
[    0.737723] NET: Registered protocol family 17
[    0.737759] Registering the dns_resolver key type
[    0.737792] Using IPI No-Shortcut mode
[    0.737940] PM: Hibernation image not present or could not be loaded.
[    0.737954] registered taskstats version 1
[    0.757624] ata1.00: configured for UDMA/100
[    0.808628] ata2.00: configured for UDMA/66
[    0.808711] ata3.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[    0.808715] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.808839] ata2.00: TEST_UNIT_READY failed (err_mask=0x2)
[    0.816521] ata3.00: configured for UDMA/133
[    0.824355] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.979637] isapnp: No Plug & Play device found
[    0.979819] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD300LD  WK10 PQ: 0 ANSI: 5
[    0.980068] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.980179] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[    0.980253] sd 0:0:0:0: [sda] Write Protect is off
[    0.980256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.980288] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.009887]  sda: sda1 sda2 < sda5 >
[    1.010347] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.025178] Freeing initrd memory: 13308k freed
[    1.051485]   Magic number: 15:186:185
[    1.051549] pci 0000:02:01.0: hash matches
[    1.051599] rtc_cmos 00:02: setting system clock to 2011-10-26 15:10:31 UTC (1319641831)
[    1.051621] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.051624] EDD information not available.
[    1.096028] usb 1-7: new high speed USB device number 3 using ehci_hcd
[    1.136015] Refined TSC clocksource calibration: 2992.499 MHz.
[    1.136022] Switching to clocksource tsc
[    1.496012] usb 2-1: new low speed USB device number 2 using uhci_hcd
[    5.908143] ata2.00: configured for UDMA/66
[    5.931798] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-115D 1.13 PQ: 0 ANSI: 5
[    5.949788] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    5.949792] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.949932] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.950013] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.950162] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD103SI  1AG0 PQ: 0 ANSI: 5
[    5.950324] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    5.950411] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    5.950483] sd 2:0:0:0: [sdb] Write Protect is off
[    5.950487] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.950518] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.991751]  sdb: sdb1 sdb2 < sdb5 >
[    5.992134] sd 2:0:0:0: [sdb] Attached SCSI disk
[    5.992175] Freeing unused kernel memory: 696k freed
[    5.992867] Write protecting the kernel text: 5332k
[    5.992926] Write protecting the kernel read-only data: 2188k
[    6.023560] udevd[86]: starting version 173
[    6.259292] Floppy drive(s): fd0 is 1.44M
[    6.275845] FDC 0 is a post-1991 82077
[    6.285684] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    6.285689] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    6.285734] e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    6.285743] e1000 0000:02:01.0: setting latency timer to 64
[    6.333916] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    6.333920] e100: Copyright(c) 1999-2006 Intel Corporation
[    6.333976] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    6.394974] usbcore: registered new interface driver uas
[    6.401544] Initializing USB Mass Storage driver...
[    6.409159] scsi4 : usb-storage 1-7:1.0
[    6.409421] e100 0000:03:08.0: PME# disabled
[    6.412196] e100 0000:03:08.0: eth0: addr 0xfeaef000, irq 20, MAC addr 00:13:20:42:ee:af
[    6.412709] usbcore: registered new interface driver usb-storage
[    6.412713] USB Mass Storage support registered.
[    6.419702] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[    6.419864] generic-usb 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1/input0
[    6.419889] usbcore: registered new interface driver usbhid
[    6.419892] usbhid: USB HID core driver
[    6.687661] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    6.734380] e1000 0000:02:01.0: eth1: (PCI:33MHz:32-bit) 00:13:20:42:ee:ae
[    6.734392] e1000 0000:02:01.0: eth1: Intel(R) PRO/1000 Network Connection
[    7.414981] scsi 4:0:0:0: Direct-Access     USB2.0   SMARTMEDIA/XD         PQ: 0 ANSI: 0 CCS
[    7.417218] scsi 4:0:0:1: Direct-Access     USB2.0   CompactFlashCard      PQ: 0 ANSI: 0 CCS
[    7.419350] scsi 4:0:0:2: Direct-Access     USB2.0    SD/MMC     card      PQ: 0 ANSI: 0 CCS
[    7.421342] scsi 4:0:0:3: Direct-Access     USB2.0   MemoryStick Card      PQ: 0 ANSI: 0 CCS
[    7.421937] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    7.422151] sd 4:0:0:1: Attached scsi generic sg4 type 0
[    7.422344] sd 4:0:0:2: Attached scsi generic sg5 type 0
[    7.422530] sd 4:0:0:3: Attached scsi generic sg6 type 0
[    7.449831] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[    7.452704] sd 4:0:0:2: [sde] Attached SCSI removable disk
[    7.455702] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    7.458699] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[   16.715373] Adding 3048444k swap on /dev/sda5.  Priority:-1 extents:1 across:3048444k 
[   16.724461] udevd[293]: starting version 173
[   16.790857] lp: driver loaded but no devices found
[   16.834587] Adding 3047420k swap on /dev/sdb5.  Priority:-2 extents:1 across:3047420k 
[   17.003587] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.026638] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,user_xattr
[   17.361261] type=1400 audit(1319641847.804:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=496 comm="apparmor_parser"
[   17.377798] type=1400 audit(1319641847.820:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=496 comm="apparmor_parser"
[   17.378128] type=1400 audit(1319641847.820:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=496 comm="apparmor_parser"
[   17.512526] parport_pc 00:09: reported by Plug and Play ACPI
[   17.512551] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   17.651237] lp0: using parport0 (interrupt-driven).
[   17.903643] Intel 82802 RNG detected
[   18.002231] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   18.025656] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   18.025934] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   18.049957] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.318056] nvidia: module license 'NVIDIA' taints kernel.
[   18.318060] Disabling lock debugging due to kernel taint
[   19.964939] Echoaudio Darla20 0000:03:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   20.675924] type=1400 audit(1319641851.116:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=838 comm="apparmor_parser"
[   20.691921] type=1400 audit(1319641851.132:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=840 comm="apparmor_parser"
[   20.695193] type=1400 audit(1319641851.136:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=840 comm="apparmor_parser"
[   20.695502] type=1400 audit(1319641851.136:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=840 comm="apparmor_parser"
[   20.723535] type=1400 audit(1319641851.164:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=841 comm="apparmor_parser"
[   20.748841] type=1400 audit(1319641851.192:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=841 comm="apparmor_parser"
[   20.759508] type=1400 audit(1319641851.200:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=841 comm="apparmor_parser"
[   21.082010] ppdev: user-space parallel port driver
[   21.125398] init: failsafe main process (714) killed by TERM signal
[   21.140344] init: apport pre-start process (905) terminated with status 1
[   21.144796] init: alsa-restore main process (913) terminated with status 19
[   21.215299] init: apport post-stop process (938) terminated with status 1
[   21.257294] Card registered: Darla20 rev.0 (DSP56301) at 0xfeaf0000 irq 17

[-- Attachment #3: Ubuntu_maxcpus=1(1).JPG --]
[-- Type: image/jpeg, Size: 91772 bytes --]

Re: kernel panic

[Bjorn Helgaas]

[-- Attachment #1: Type: text/plain, Size: 2009 bytes --]

On Wed, Oct 26, 2011 at 4:00 AM, Len Brown <lenb417@gmail.com> wrote:
>>>  after upgrading to linux kernel 3.xx I get kernel panic on boot unless I
>>> use ACPI=off in the boot parameters this happens with both Ubuntu 11.10 and
>>> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4 3ghz with
>>> 3gig RAM in single-channel mode. I have performed a Bios upgrade just in
>>> case tha ACPI tables were corrupt but it makes no difference. Currently
>>> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues.
>
> Is this problem new in 3.1, or is it also present in 2.6.39 or 3.0?
>
> Also, do any other cmdline parmaters besides acpi=off work-around it?
> pci=noacpi
> maxcpus=1
>
> etc.

Please keep all the cc's when responding.  Saves you work, saves us work :)

Summary of what I think you're seeing (please correct if wrong):

2.6.38 (Ubuntu/Mint): works fine, even with no boot args
2.6.38 (Fedora 15): works fine, even with no boot args
2.6.40? (Fedora 15 with upgraded kernel): requires "acpi=off" to boot
3.0.0-12 (Ubuntu/Mint): requires "acpi=off" or "maxcpus=1" to boot.
"pci=noacpi" makes no difference.  with no arguments, panics as in
attached screenshot.
3.1.0-0.rc6 (Fedora 16 live CD): can't find root device, drops to
debug shell, even with "maxcpus=1"

Let's focus on Ubuntu and forget Fedora for now.

The screenshot you sent (attached) has a clue ("EIP: [<00000000>] 0x0
SS:ESP 007b:00000046 CR2: 00000000ffffffff, Fatal exception in
interrupt") but doesn't really have enough context.  I should have
suggested booting with "vga=0xf07".  That will use a smaller font, so
the photo can capture more information.  Can you try that?  You might
have to use a lower jpg quality setting or resave with gimp at a low
quality setting to make the size 100K or less for the mailing lists.

If you can boot 3.0.0-12 with "maxcpus=1", collect the dmesg log and
maybe we can compare it with the new "vga=0xf07" screenshot.

Bjorn

[-- Attachment #2: ubuntu11.10-small.JPG --]
[-- Type: image/jpeg, Size: 93834 bytes --]

Re: kernel panic

[Len Brown]

>>  after upgrading to linux kernel 3.xx I get kernel panic on boot unless I
>> use ACPI=off in the boot parameters this happens with both Ubuntu 11.10 and
>> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4 3ghz with
>> 3gig RAM in single-channel mode. I have performed a Bios upgrade just in
>> case tha ACPI tables were corrupt but it makes no difference. Currently
>> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues.

Is this problem new in 3.1, or is it also present in 2.6.39 or 3.0?

Also, do any other cmdline parmaters besides acpi=off work-around it?
pci=noacpi
maxcpus=1

etc.

thanks,
Len Brown, Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: kernel panic

[Len Brown]

>>  after upgrading to linux kernel 3.xx I get kernel panic on boot unless I
>> use ACPI=off in the boot parameters this happens with both Ubuntu 11.10 and
>> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4 3ghz with
>> 3gig RAM in single-channel mode. I have performed a Bios upgrade just in
>> case tha ACPI tables were corrupt but it makes no difference. Currently
>> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues.

Is this problem new in 3.1, or is it also present in 2.6.39 or 3.0?

Also, do any other cmdline parmaters besides acpi=off work-around it?
pci=noacpi
maxcpus=1

etc.

thanks,
Len Brown, Intel Open Source Technology Center

Re: kernel panic

[Bjorn Helgaas]

[+linux-acpi]

On Mon, Oct 24, 2011 at 5:19 AM, nick bray <nick.bray1@ntlworld.com> wrote:
> Hi,
>  after upgrading to linux kernel 3.xx I get kernel panic on boot unless I
> use ACPI=off in the boot parameters this happens with both Ubuntu 11.10 and
> Fedora 16. The mainboard is an Intel S875WP1-E running a Pentuim 4 3ghz with
> 3gig RAM in single-channel mode. I have performed a Bios upgrade just in
> case tha ACPI tables were corrupt but it makes no difference. Currently
> running 2.6.38-11-generic #50-Ubuntu SMP (Linux Mint) with no issues. I can
> provide a screenshot if you wish but it's looking like it's ACPI related as
> above.

Yes, please provide a screenshot.  A serial console log with "acpi=off
ignore_loglevel" would be even better.

Bjorn

kernel panic

[nick bray]

Hi,
  after upgrading to linux kernel 3.xx I get kernel panic on boot unless 
I use ACPI=off in the boot parameters this happens with both Ubuntu 
11.10 and Fedora 16. The mainboard is an Intel S875WP1-E running a 
Pentuim 4 3ghz with 3gig RAM in single-channel mode. I have performed a 
Bios upgrade just in case tha ACPI tables were corrupt but it makes no 
difference. Currently running 2.6.38-11-generic #50-Ubuntu SMP (Linux 
Mint) with no issues. I can provide a screenshot if you wish but it's 
looking like it's ACPI related as above.

Yours sincerely

Nick Bray

Re: kernel panic

[Eric Dumazet]

Le mardi 18 mai 2010 à 10:46 +0530, senthilkumaar2021 a écrit :
> Hi
> 
> thanks fro the reply
> 
> i was able to capture only part of the message
> 
> Machine was running squid 2.7stable6 with tproxy4
> in bridge mode on Linux kernel 2.6.28.5 and the server had
>  kernel panic for every 10 to 12 hours. The logged error:
> 
>     [<ffffffffa0152a4b>] bnx2_poll_work+0xea0/0xfb9 [bnx2]
>     [<ffffffff81029713>] enqueue_task+0x50/0x5b
>     [<ffffffff8104d2ab>] getnstimeofday+0x53/0xb2
>    [<ffffffffa0152f31>] bnx2_poll+0xd1/0x1ae [bnx2]
>      [<ffffffff8120724a>] net_rx_action+0x9d/0x158
>      [<ffffffff8103af44>] __do_softirq+0x7a/0x13d
>      [<ffffffffa0151b6e>] bnx2_msi+0x40/0x47 [bnx2]
>      [<ffffffff8100cf5c>] call_softirq+0x1c/0x28
>      [<ffffffff8100ddc0>] do_softirq+0x2c/0x68
>      [<ffffffff8103ae84>] irq_exit+0x3f/0x85
>      [<ffffffff8100e06f>] do_IRQ+0x14a/0x16b
>     [<ffffffff8100c216>] ret_from_intr+0x0/0xa
>     <EOI> <0> [<ffffffff81174711>] acpi_idle_enter_bm+0x2a3/0x30e
>     [<ffffffff81174707>] acpi_idle_enter_bm+0x299/0x30e
>    [<ffffffff8106bac3>] rcu_needs_cpu+0x35/0x44
>     [<ffffffff811e8269>] cpuidle_idle_call+0x7f/0xbe
>      [<ffffffff8100abd4>] cpu_idle+0x4a/0x6d
>     Code: 5e 5b 5d 31 c0 c3 41 55 41 54 55 53 48 89 fb 48 83 ec 68 4c 8b
>      a7 98 00 00
>     00 4c 8b 6f 20 48 8b b7 d0 00 00 00 8b 8f bc 00 00 00 <41> f6 44 24
>      18 01 74 12
>      8a 47 7d 83 e0 f8 83 c8 03 88 47 7d 41
>     RIP [<ffffffffa02c405f>] br_nf_pre_routing_finish+0x25/0x2af [bridge]
>     RSP <ffffffff8155fb40>
>     CR2: 0000000000000018
>     Kernel panic - not syncing: Fatal exception in interrupt
> 
>  The kernel panic occurred in CentOS as well as Fedora 8 64 bit.
> 
>  When we checked this with squid community, they replied it as the
>  problem of the Network Card. When the NIC was changed to Intel from
>  Broadcom, RAM replaced with new sets and kernel updated to 2.6.30.5, the
>  find it attached). This happens once in two days. We have been trying to
>  resolve this for over 3 weeks now but in vain, any help on this is much
>  appreciated.
> 
>  hardware detail_
> 
>  CPU : 3.0 GHz
> RAM : 4 GB RAM
>  HDD : 4 x 150 GB
> 
>  OS : Fedora 8 64 bit
>  FS : ReiserFS
> Max request rate : 400 per second

You could try to adapt commit e94c67436e

Maybe its same problem...

commit e94c67436efa22af7d8b7d19c885863246042543
Author: Bart De Schuymer <bdschuym@pandora.be>
Date:   Thu May 13 14:55:34 2010 +0200

    netfilter: bridge-netfilter: fix crash in br_nf_forward_finish()
    
    [ 4593.956206] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
    [ 4593.956219] IP: [<ffffffffa03357a4>] br_nf_forward_finish+0x154/0x170 [bridge]
    [ 4593.956232] PGD 195ece067 PUD 1ba005067 PMD 0
    [ 4593.956241] Oops: 0000 [#1] SMP
    [ 4593.956248] last sysfs file:
    /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/ATK0110:00/hwmon/hwmon0/temp2_label
    [ 4593.956253] CPU 3
    ...
    [ 4593.956380] Pid: 29512, comm: kvm Not tainted 2.6.34-rc7-net #195 P6T DELUXE/System Product Name
    [ 4593.956384] RIP: 0010:[<ffffffffa03357a4>]  [<ffffffffa03357a4>] br_nf_forward_finish+0x154/0x170 [bridge]
    [ 4593.956395] RSP: 0018:ffff880001e63b78  EFLAGS: 00010246
    [ 4593.956399] RAX: 0000000000000608 RBX: ffff880057181700 RCX: ffff8801b813d000
    [ 4593.956402] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff880057181700
    [ 4593.956406] RBP: ffff880001e63ba8 R08: ffff8801b9d97000 R09: ffffffffa0335650
    [ 4593.956410] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801b813d000
    [ 4593.956413] R13: ffffffff81ab3940 R14: ffff880057181700 R15: 0000000000000002
    [ 4593.956418] FS:  00007fc40d380710(0000) GS:ffff880001e60000(0000) knlGS:0000000000000000
    [ 4593.956422] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
    [ 4593.956426] CR2: 0000000000000018 CR3: 00000001ba1d7000 CR4: 00000000000026e0
    [ 4593.956429] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    [ 4593.956433] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    [ 4593.956437] Process kvm (pid: 29512, threadinfo ffff8801ba566000, task ffff8801b8003870)
    [ 4593.956441] Stack:
    [ 4593.956443]  0000000100000020 ffff880001e63ba0 ffff880001e63ba0 ffff880057181700
    [ 4593.956451] <0> ffffffffa0335650 ffffffff81ab3940 ffff880001e63bd8 ffffffffa03350e6
    [ 4593.956462] <0> ffff880001e63c40 000000000000024d ffff880057181700 0000000080000000
    [ 4593.956474] Call Trace:
    [ 4593.956478]  <IRQ>
    [ 4593.956488]  [<ffffffffa0335650>] ? br_nf_forward_finish+0x0/0x170 [bridge]
    [ 4593.956496]  [<ffffffffa03350e6>] NF_HOOK_THRESH+0x56/0x60 [bridge]
    [ 4593.956504]  [<ffffffffa0335282>] br_nf_forward_arp+0x112/0x120 [bridge]
    [ 4593.956511]  [<ffffffff813f7184>] nf_iterate+0x64/0xa0
    [ 4593.956519]  [<ffffffffa032f920>] ? br_forward_finish+0x0/0x60 [bridge]
    [ 4593.956524]  [<ffffffff813f722c>] nf_hook_slow+0x6c/0x100
    [ 4593.956531]  [<ffffffffa032f920>] ? br_forward_finish+0x0/0x60 [bridge]
    [ 4593.956538]  [<ffffffffa032f800>] ? __br_forward+0x0/0xc0 [bridge]
    [ 4593.956545]  [<ffffffffa032f86d>] __br_forward+0x6d/0xc0 [bridge]
    [ 4593.956550]  [<ffffffff813c5d8e>] ? skb_clone+0x3e/0x70
    [ 4593.956557]  [<ffffffffa032f462>] deliver_clone+0x32/0x60 [bridge]
    [ 4593.956564]  [<ffffffffa032f6b6>] br_flood+0xa6/0xe0 [bridge]
    [ 4593.956571]  [<ffffffffa032f800>] ? __br_forward+0x0/0xc0 [bridge]
    
    Don't call nf_bridge_update_protocol() for ARP traffic as skb->nf_bridge isn't
    used in the ARP case.
    
    Reported-by: Stephen Hemminger <shemminger@vyatta.com>
    Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
    Signed-off-by: Patrick McHardy <kaber@trash.net>

diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 93f80fe..4442099 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -643,10 +643,10 @@ static int br_nf_forward_finish(struct sk_buff *skb)
 			skb->pkt_type = PACKET_OTHERHOST;
 			nf_bridge->mask ^= BRNF_PKT_TYPE;
 		}
+		nf_bridge_update_protocol(skb);
 	} else {
 		in = *((struct net_device **)(skb->cb));
 	}
-	nf_bridge_update_protocol(skb);
 	nf_bridge_push_encap_header(skb);
 
 	NF_HOOK_THRESH(NFPROTO_BRIDGE, NF_BR_FORWARD, skb, in,

Re: kernel panic

[Justin P. Mattock]

On 05/17/2010 09:55 PM, senthilkumaar2021 wrote:
> Hi
>
> Thanks for the reply
>
> Initially i was using kernel 2.6.28.5 and kernel panic occurred in that
> version too
>
> tproxy is not supported in linux 2.6.32
>
> http://wiki.squid-cache.org/Features/Tproxy4
>
> kindly guide me how to proceed
>
> Regards
> senthil
>


hmm.. I'm wondering if this should be discussed here then.
In any case do you receive this error with 2.6.30
(even though 2.6.28 gives you this)

if so then doing a bisect might be a bit hard todo.
(unless 2.6.30 is good, then a bisect can at-least
point you in the right direction with what might be happening).

Justin P. Mattock

Re: kernel panic

[Eric Dumazet]

Le mardi 18 mai 2010 à 10:25 +0530, senthilkumaar2021 a écrit :
> Hi
> 
> Thanks for the reply
> 
> Initially i was using kernel 2.6.28.5 and kernel panic occurred in that 
> version too
> 
> tproxy is not supported in linux 2.6.32
> 
> http://wiki.squid-cache.org/Features/Tproxy4
> 
> kindly guide me how to proceed

Please submit full panic log, and kernel version

AFAIK tproxy is now in Linux kernel tree.

Re: kernel panic

[senthilkumaar2021]

Hi

Thanks for the reply

Initially i was using kernel 2.6.28.5 and kernel panic occurred in that 
version too

tproxy is not supported in linux 2.6.32

http://wiki.squid-cache.org/Features/Tproxy4

kindly guide me how to proceed

Regards
senthil

Justin P. Mattock wrote:
> On 05/17/2010 09:23 PM, senthilkumaar2021 wrote:
>> HI
>>
>>
>> I am using iptables version 1.43 and getting the following error in
>> machine while using squid in tproxy.we are using Linux machine as bridge
>> too
>>
>> i was able to capture part of the error only please help me in solving
>> the issue
>>
>>
>> [<ffffffffa03933c2>] ? nf_nat_fn+0x138/0x14e [iptable_nat]
>> [<ffffffffa0393585>] ? nf_nat_in+0x2f/0x6e [iptable_nat]
>> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
>> 0x2c4 [bridge]
>> [<ffffffffa027edfa>] br_nf_pre_routing_finish+0x50/
>> 0x2c4 [bridge]
>> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
>> 0x2c4 [bridge]
>> [<ffffffff81339a50>] ? nf_hook_slow+0x68/0xc8
>> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
>> [<ffffffffa027f616>] br_nf_pre_routing+0x5a8/0x5c7 [bridge]
>> [<ffffffff813399ab>] nf_iterate+0x48/0x85
>> [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
>> [<ffffffff81339a50>] nf_hook_slow+0x68/0xc8
>> [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
>> [<ffffffffa027ac36>] br_handle_frame+0x1b1/0x1db [bridge]
>> [<ffffffff8131d54b>] netif_receive_skb+0x316/0x434
>> [<ffffffff8131dbfb>] napi_gro_receive+0x6e/0x83
>> [<ffffffffa0125bfe>] e1000_receive_skb+0x5c/0x65 [e1000e]
>> [<ffffffffa0125de8>] e1000_clean_rx_irq+0x1e1/0x28f [e1000e]
>> [<ffffffffa012730e>] e1000_clean+0x99/0x24a [e1000e]
>> [<ffffffff813bcfc5>] ? _spin_unlock_irqrestore+0x2c/0x43
>> [<ffffffff8131ba62>] net_rx_action+0xb8/0x1b4
>> [<ffffffff8104ed43>] __do_softirq+0x99/0x152
>> [<ffffffff8101284c>] call_softirq+0x1c/0x30
>> [<ffffffff81013a02>] do_softirq+0x52/0xb9
>> [<ffffffff8104e969>] irq_exit+0x53/0x8d
>> [<ffffffff81013d1a>] do_IRQ+0x135/0x157
>> [<ffffffff81011f93>] ret_from_intr+0x0/0x2e
>> <EOI> [<ffffffff81017e20>] ? mwait_idle+0x9e/0xc7
>> [<ffffffff81017e17>] ? mwait_idle+0x95/0xc7
>> [<ffffffff813bfd20>] ? atomic_notifier_call_chain+0x13/0x15
>> [<ffffffff810102f4>] ? enter_idle+0x27/0x2>
>>
>> Regards
>> senthil
>> -- 
>> To unsubscribe from this list: send the line "unsubscribe 
>> linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>>
>
>
> if you can.. find the last good kernel, then
> do a bisect.
> (if you need help doing a bisect, there's plenty
> of people to help you out).
>
> Justin P. Mattock
>

Re: kernel panic

[Justin P. Mattock]

On 05/17/2010 09:23 PM, senthilkumaar2021 wrote:
> HI
>
>
> I am using iptables version 1.43 and getting the following error in
> machine while using squid in tproxy.we are using Linux machine as bridge
> too
>
> i was able to capture part of the error only please help me in solving
> the issue
>
>
> [<ffffffffa03933c2>] ? nf_nat_fn+0x138/0x14e [iptable_nat]
> [<ffffffffa0393585>] ? nf_nat_in+0x2f/0x6e [iptable_nat]
> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
> 0x2c4 [bridge]
> [<ffffffffa027edfa>] br_nf_pre_routing_finish+0x50/
> 0x2c4 [bridge]
> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
> 0x2c4 [bridge]
> [<ffffffff81339a50>] ? nf_hook_slow+0x68/0xc8
> [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
> [<ffffffffa027f616>] br_nf_pre_routing+0x5a8/0x5c7 [bridge]
> [<ffffffff813399ab>] nf_iterate+0x48/0x85
> [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
> [<ffffffff81339a50>] nf_hook_slow+0x68/0xc8
> [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
> [<ffffffffa027ac36>] br_handle_frame+0x1b1/0x1db [bridge]
> [<ffffffff8131d54b>] netif_receive_skb+0x316/0x434
> [<ffffffff8131dbfb>] napi_gro_receive+0x6e/0x83
> [<ffffffffa0125bfe>] e1000_receive_skb+0x5c/0x65 [e1000e]
> [<ffffffffa0125de8>] e1000_clean_rx_irq+0x1e1/0x28f [e1000e]
> [<ffffffffa012730e>] e1000_clean+0x99/0x24a [e1000e]
> [<ffffffff813bcfc5>] ? _spin_unlock_irqrestore+0x2c/0x43
> [<ffffffff8131ba62>] net_rx_action+0xb8/0x1b4
> [<ffffffff8104ed43>] __do_softirq+0x99/0x152
> [<ffffffff8101284c>] call_softirq+0x1c/0x30
> [<ffffffff81013a02>] do_softirq+0x52/0xb9
> [<ffffffff8104e969>] irq_exit+0x53/0x8d
> [<ffffffff81013d1a>] do_IRQ+0x135/0x157
> [<ffffffff81011f93>] ret_from_intr+0x0/0x2e
> <EOI> [<ffffffff81017e20>] ? mwait_idle+0x9e/0xc7
> [<ffffffff81017e17>] ? mwait_idle+0x95/0xc7
> [<ffffffff813bfd20>] ? atomic_notifier_call_chain+0x13/0x15
> [<ffffffff810102f4>] ? enter_idle+0x27/0x2>
>
> Regards
> senthil
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>


if you can.. find the last good kernel, then
do a bisect.
(if you need help doing a bisect, there's plenty
of people to help you out).

Justin P. Mattock

kernel panic

[senthilkumaar2021]

HI


I am using iptables version 1.43 and getting the following error in 
machine while using squid in tproxy.we are using Linux machine as bridge too

i was able to capture part of the error only please help me in solving 
the issue


 [<ffffffffa03933c2>] ? nf_nat_fn+0x138/0x14e [iptable_nat]
 [<ffffffffa0393585>] ? nf_nat_in+0x2f/0x6e [iptable_nat]
 [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
0x2c4 [bridge]
 [<ffffffffa027edfa>] br_nf_pre_routing_finish+0x50/
0x2c4 [bridge]
 [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
0x2c4 [bridge]
 [<ffffffff81339a50>] ? nf_hook_slow+0x68/0xc8
 [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
 [<ffffffffa027f616>] br_nf_pre_routing+0x5a8/0x5c7 [bridge]
 [<ffffffff813399ab>] nf_iterate+0x48/0x85
 [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
 [<ffffffff81339a50>] nf_hook_slow+0x68/0xc8
 [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
 [<ffffffffa027ac36>] br_handle_frame+0x1b1/0x1db [bridge]
 [<ffffffff8131d54b>] netif_receive_skb+0x316/0x434
 [<ffffffff8131dbfb>] napi_gro_receive+0x6e/0x83
 [<ffffffffa0125bfe>] e1000_receive_skb+0x5c/0x65 [e1000e]
 [<ffffffffa0125de8>] e1000_clean_rx_irq+0x1e1/0x28f [e1000e]
 [<ffffffffa012730e>] e1000_clean+0x99/0x24a [e1000e]
 [<ffffffff813bcfc5>] ? _spin_unlock_irqrestore+0x2c/0x43
 [<ffffffff8131ba62>] net_rx_action+0xb8/0x1b4
 [<ffffffff8104ed43>] __do_softirq+0x99/0x152
 [<ffffffff8101284c>] call_softirq+0x1c/0x30
 [<ffffffff81013a02>] do_softirq+0x52/0xb9
 [<ffffffff8104e969>] irq_exit+0x53/0x8d
 [<ffffffff81013d1a>] do_IRQ+0x135/0x157
 [<ffffffff81011f93>] ret_from_intr+0x0/0x2e
 <EOI> [<ffffffff81017e20>] ? mwait_idle+0x9e/0xc7
 [<ffffffff81017e17>] ? mwait_idle+0x95/0xc7
 [<ffffffff813bfd20>] ? atomic_notifier_call_chain+0x13/0x15
 [<ffffffff810102f4>] ? enter_idle+0x27/0x2>

 Regards
senthil

kernel panic

[senthilkumaar2021]

Hi

Thanks for the reply

I was using kernel 2.6.28.5 and 2.6.30.5 but i got kernel panic in both 
versions

my iptable and ebtable are as follows

iptables -t mangle -N DIVERT
iptables -t mangle -A DIVERT -j MARK --set-mark 1
iptables -t mangle -A DIVERT -j ACCEPT

iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT

iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY --tproxy-mark 0x1/0x1 --on-port 3129

 ebtables -t broute -A BROUTING -i $CLIENT_IFACE -p ipv4 --ip-proto tcp --ip-dport 80 -j redirect --redirect-target DROP

 ebtables -t broute -A BROUTING -i $INET_IFACE -p ipv4 --ip-proto tcp --ip-sport 80 -j redirect --redirect-target DROP

Regards
senthil

> Hi,
>
> >I am using iptables version 1.43 and getting the following error in
> >machine while using squid in tproxy.we are using Linux machine as
> >bridge too
> >i was able to capture part of the error only please help me in solving
> >the issue
>
> What kernel version are you using? I don't know if it's the same
> problem but I was experiencing kernel panic with tproxy in recent
> kernels if there were any traffic to port 80 to the box itself. I was
> able to workaround the problem using RETURN target on the local traffic
> before "-m socket" match and DIVERT target.
>
> XX.XX.XX.XX in the example is the local box address.
>
> My mangle starts this way:
>
>        IPTM="${IPT} -t mangle"
>        echo $" * Launching mangle RULEZ..."
>
>
>        # Setup a chain DIVERT to mark packets
>        $IPTM -N DIVERT
>        $IPTM -A DIVERT -j MARK --set-mark 1
>        $IPTM -A DIVERT -j ACCEPT
>
>        # Bez przekierowywania na proxy w przypadku polaczen do 
> lokalnego serwera www (videocache)
>        $IPTM -A PREROUTING -p tcp -d XX.XX.XX.XX --dport 80 -j ACCEPT
>
>        # Use DIVERT to prevent existing connections going through 
> TPROXY twice
>        $IPTM -A PREROUTING -p tcp -m socket -j DIVERT --dport 80       
> # regula dla ruchu klienci->swiat
>        $IPTM -A PREROUTING -p tcp -m socket -j DIVERT --sport 80
>
>
> Hope this helps.
>
> Best regards,
> Marek

kernel panic

[senthilkumaar2021]

HI


I am using iptables version 1.43 and getting the following error in 
machine while using squid in tproxy.we are using Linux machine as bridge too

i was able to capture part of the error only please help me in solving 
the issue


  [<ffffffffa03933c2>] ? nf_nat_fn+0x138/0x14e [iptable_nat]
  [<ffffffffa0393585>] ? nf_nat_in+0x2f/0x6e [iptable_nat]
  [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/
0x2c4 [bridge]
  [<ffffffffa027edfa>] br_nf_pre_routing_finish+0x50/
0x2c4 [bridge]
  [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
  [<ffffffff81339a50>] ? nf_hook_slow+0x68/0xc8
  [<ffffffffa027edaa>] ? br_nf_pre_routing_finish+0x0/0x2c4 [bridge]
  [<ffffffffa027f616>] br_nf_pre_routing+0x5a8/0x5c7 [bridge]
  [<ffffffff813399ab>] nf_iterate+0x48/0x85
  [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
  [<ffffffff81339a50>] nf_hook_slow+0x68/0xc8
  [<ffffffffa027a931>] ? br_handle_frame_finish+0x0/0x154 [bridge]
  [<ffffffffa027ac36>] br_handle_frame+0x1b1/0x1db [bridge]
  [<ffffffff8131d54b>] netif_receive_skb+0x316/0x434
  [<ffffffff8131dbfb>] napi_gro_receive+0x6e/0x83
  [<ffffffffa0125bfe>] e1000_receive_skb+0x5c/0x65 [e1000e]
  [<ffffffffa0125de8>] e1000_clean_rx_irq+0x1e1/0x28f [e1000e]
  [<ffffffffa012730e>] e1000_clean+0x99/0x24a [e1000e]
  [<ffffffff813bcfc5>] ? _spin_unlock_irqrestore+0x2c/0x43
  [<ffffffff8131ba62>] net_rx_action+0xb8/0x1b4
  [<ffffffff8104ed43>] __do_softirq+0x99/0x152
  [<ffffffff8101284c>] call_softirq+0x1c/0x30
  [<ffffffff81013a02>] do_softirq+0x52/0xb9
  [<ffffffff8104e969>] irq_exit+0x53/0x8d
  [<ffffffff81013d1a>] do_IRQ+0x135/0x157
  [<ffffffff81011f93>] ret_from_intr+0x0/0x2e
  <EOI> [<ffffffff81017e20>] ? mwait_idle+0x9e/0xc7
  [<ffffffff81017e17>] ? mwait_idle+0x95/0xc7
  [<ffffffff813bfd20>] ? atomic_notifier_call_chain+0x13/0x15
  [<ffffffff810102f4>] ? enter_idle+0x27/0x2>

  Regards
senthil

Re: Kernel panic

[Bart Van Assche]

On Mon, Apr 21, 2008 at 12:56 PM, Matthias Andersson
<matthias.andersson@gmail.com> wrote:
>  I upgraded to Ubuntu 8.04 (Hardy Heron) four days ago and with it the
>  2.6.24-16 kernel.
>  The kernel worked fine until yesterday when I booted up the machine I
>  was greeted by the following error message:
>
>   /init: ./34: Can't open /scripts/functions
>  [   20.587228] kernel panic - not syncing: attempted to kill init!
>
>  What could have caused this failiure?
>  There were some upgrades installed before the final shutdown of the
>  system (prior to the kernel panic) but nothing system-critical.

Hello Matthias,

This is an Ubuntu 8.04 issue, not a kernel issue. Please post this
issue in an Ubuntu forum.

Bart.

Kernel panic

[Matthias Andersson]

Hi!

I upgraded to Ubuntu 8.04 (Hardy Heron) four days ago and with it the
2.6.24-16 kernel.
The kernel worked fine until yesterday when I booted up the machine I
was greeted by the following error message:

 /init: ./34: Can't open /scripts/functions
[   20.587228] kernel panic - not syncing: attempted to kill init!

What could have caused this failiure?
There were some upgrades installed before the final shutdown of the
system (prior to the kernel panic) but nothing system-critical.

//Matthias Andersson

kernel panic

[john bryant]

[-- Attachment #1.1: Type: text/plain, Size: 2172 bytes --]

Hi all,

I am using xen3.0.4. I  am able to boot dom0. While booting a guest OS, i am
getting following error:



Bringing up interface eth0:  network_tx_buf_gc: warning -- grant still in
use by backend domain.
------------[ cut here ]------------
kernel BUG at drivers/xen/netfront/netfront.c:678!
invalid opcode: 0000 [#1]
SMP
Modules linked in: binfmt_misc dm_mirror dm_mod lp parport_pc parport nvram
usbcore
CPU:    0
EIP:    0061:[<c022fd15>]    Not tainted VLI
EFLAGS: 00010096   (2.6.16.33-xen #263)
EIP is at network_tx_buf_gc+0x1e8/0x2be
eax: 00000047   ebx: 00000001   ecx: 00000000   edx: 00000001
esi: c73acbc0   edi: c04f0380   ebp: 00000000   esp: c73c5cb8
ds: 007b   es: 007b   ss: 0069
Process arping (pid: 1797, threadinfo=c73c4000 task=c724d030)
Stack: <0>c0397424 c04f0000 00000001 fd5520de 0000014f c73c4000 00000000
0000002a
       c04f0380 c73acbc0 c02324c8 00000004 c73c5ce8 c73c5ce8 c04f0450
00000000
       c04f0c54 26e953c0 c04f0000 c7a59c02 00000001 c8185040 00000000
00000c02
Call Trace:
 [<c02324c8>] network_start_xmit+0x516/0x67e
 [<c0107917>] monotonic_clock+0x54/0x99
 [<c02eaebf>] dev_hard_start_xmit+0x1e8/0x2ce
 [<c02e6b7a>] alloc_skb_from_cache+0x43/0xf9
 [<c02f9ab3>] __qdisc_run+0x6e/0x248
 [<c011f0df>] profile_handoff_task+0x1b/0x2d
 [<c02ecce8>] dev_queue_xmit+0x1cb/0x36c
 [<c02e76aa>] memcpy_fromiovec+0x37/0x4e
 [<c03449ad>] packet_sendmsg+0x1ce/0x25e
 [<c02e0b9c>] sock_sendmsg+0xe6/0x101
 [<c01542d5>] find_mergeable_anon_vma+0x88/0xbc
 [<c0130eae>] autoremove_wake_function+0x0/0x37
 [<c04584d4>] net_dev_init+0x17/0x1f4
 [<c045857c>] net_dev_init+0xbf/0x1f4
 [<c0150062>] __handle_mm_fault+0xc99/0x104f
 [<c01c9203>] copy_from_user+0x2e/0x64
 [<c02e200b>] sys_sendto+0xf5/0x116
 [<c02ec9de>] dev_ioctl+0x23a/0x379
 [<c034971e>] do_page_fault+0x51e/0xd00
 [<c02e2369>] sys_socketcall+0x1bb/0x294
 [<c0105289>] syscall_call+0x7/0xb
Code: 2b 44 24 0c 1b 54 24 10 01 c8 11 da a3 e0 8d 4c c0 89 15 e4 8d 4c c0
83 c4 18 5b 5e 5f 5d c3 c7 04 24 24 74 39 c0 e8 45 e7 ee ff <0f> 0b a6 02 dc
73 39 c0 e9 a7 fe ff ff 0f 0b 92 02 dc 73 39 c0
 <0>Kernel panic - not syncing: Fatal exception in interrupt

Any help is appreciated
-John

[-- Attachment #1.2: Type: text/html, Size: 2804 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Kernel panic

[Jörg Sommer]

[-- Attachment #1: Type: text/plain, Size: 2497 bytes --]

[Please send me a copy of replies. I'm not subscribed.]

Hi,

[ 6421.398151] skb_under_panic: text:c01d7954 len:1504 put:2 head:cb786000 data:cb785fff tail:cb7865df end:cb7>
[ 6421.431624] ------------[ cut here ]------------
[ 6421.445405] Kernel BUG at [verbose debug info unavailable]
[ 6421.461783] invalid opcode: 0000 [#1]
[ 6421.472725] Modules linked in: lp
[ 6421.482755] CPU:    0
[ 6421.482784] EIP:    0060:[<c020c257>]    Not tainted VLI
[ 6421.482835] EFLAGS: 00010286   (2.6.18 #1)
[ 6421.517937] EIP is at skb_under_panic+0x37/0x50
[ 6421.531492] eax: 00000082   ebx: 000005e0   ecx: 00000073   edx: 00000000
[ 6421.551776] esi: cac4ee40   edi: c12e43a0   ebp: cac4ee40   esp: c11d3f40
[ 6421.572054] ds: 007b   es: 007b   ss: 0068
[ 6421.584312] Process ksoftirqd/0 (pid: 2, ti=c11d2000 task=c11cc540 task.ti=c11d2000)
[ 6421.606902] Stack: c028dd44 c01d7954 000005e0 00000002 cb786000 cb785fff cb7865df cb786600
[ 6421.632236]        c0280ab7 00000000 c01d7960 c12e43a0 c30a0620 cac4ee40 c12e43a0 c78ad000
[ 6421.657572]        c01d80e6 21000246 cac4ee40 cbedc298 cbedc200 cbedc264 c01d9e5f 00000000
[ 6421.682906] Call Trace:
[ 6421.690790]  [<c01d7954>] ppp_receive_frame+0x604/0x6e0
[ 6421.706518]  [<c01d7960>] ppp_receive_frame+0x610/0x6e0
[ 6421.722216]  [<c01d80e6>] ppp_input+0x86/0x100
[ 6421.735542]  [<c01d9e5f>] ppp_async_process+0x1f/0x70
[ 6421.750725]  [<c0112793>] tasklet_action+0x33/0x60
[ 6421.765159]  [<c01126d0>] __do_softirq+0x50/0xa0
[ 6421.779028]  [<c01129c0>] ksoftirqd+0x0/0xc0
[ 6421.791860]  [<c0112755>] do_softirq+0x35/0x40
[ 6421.805211]  [<c0112a35>] ksoftirqd+0x75/0xc0
[ 6421.818303]  [<c011ea04>] kthread+0xd4/0xe0
[ 6421.830883]  [<c011e930>] kthread+0x0/0xe0
[ 6421.843198]  [<c0100c65>] kernel_thread_helper+0x5/0x10
[ 6421.858870] Code: 90 a0 00 00 00 52 8b 90 9c 00 00 00 52 8b 90 98 00 00 00 52 8b 90 94 00 00 00 52 53 8b 58
[ 6421.918345] EIP: [<c020c257>] skb_under_panic+0x37/0x50 SS:ESP 0068:c11d3f40
[ 6421.939512]  <0>Kernel panic - not syncing: Fatal exception in interrupt

% uname -a
Linux alea 2.6.18 #1 Thu Dec 20 15:16:05 CET 2007 i586 GNU/Linux

The panic happens when I have a heavy disk access. I can't reproduce it
directly, but reading much data from disk and using pppd with a 56k modem
line triggers the panic.

Ask if you need more infos.

Bye, Jörg.
-- 
Der Pessimist ist jemand, der vorzeitig die Wahrheit erzählt.
    	      	  	      		    	(Cyrano de Bergerac)

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

kernel panic

[Jacques Rodary]

Hi Miha
I first didn't see your post, and posted independently on the same
subject (with a typo). I have the same message than yours, but not
always, but it always ends with "Fatal exception in interrupt", includes
sometimes "common_interrupt+0x1a/0x20" and sometimes
"ip_nat_fn..[iptables_nat]". And I never had this before I used NAT on a
SMP box (2 dual-core Xeons).
Also in my logs I found these kernel errors: e1000: eth0: e1000_up:
Unable to allocate interrupt Error: -16 ...:  5 Time(s), but it's
perhaps unrelated.
Finally I can obtain this kernel panic by trying to connect to vncserver
from outside.

Have you got any answer? Thanks in advance.
	Jacques Rodary
P.S.: You Can see my config in the post Kernet (sic) panic with NAT.

kernel panic

[Miha Verlic]

Hello,

today one of the servers I administer crashed for the third time due to 
kernel panic. Folks at colocation site provided me with the following 
"screenshot": http://miha.krneki.org/netfilter/kernelpanic.jpg

I'm not sure whether this is related with netfilter/iptables, tg3 or 
something else, but the screenshot is full of netfilter messagess, so I 
tried this list first.

Funny thing is that /proc/sys/kernel/panic was set to 60 seconds, yet 
the machine did not reboot itself after the crash and colocation people 
said machine was not responding to keyboard, so they could not provide 
the whole trace.

Another interesting thing - machine is heavily loaded (apache+php+mysql) 
- pushing around 35-45mbit/s througout the whole day. After midnight 
utilization gets very low and yet all 3 crashes occured at around 2AM 
local time. There are no cron scripts at that time that would cause any 
cpu/network hammering, system is virtually idle.

Server is Dual Opteron 250 with 4gb ECC RAM and Adaptec 2015S SCSI 
controller (2x RAID1).

At the time of crash, system was using:
OS: (32bit) slackware-based with:
glibc 2.3.6 (NPTL), gcc 3.3.6,
iptables 1.3.4 (upgraded to 1.3.5 after crash)
kernel 2.6.17.8 with the following patches:
   - grsecurity 2.1.9 (200608012135)
   - dpt_i2o-2.5.0-2426 driver from adaptec
SMP and PAE are enabled, config file is located at:
http://miha.krneki.org/netfilter/config-2.6.17.8+d1

If anyone has any clue, don't hesitate to contact me.

Cheers
--
Miha

kernel panic

[febo]

Running a stock FC5 kernel with a P4 and HT enabled..
After 1 month uptime with no problems I get this out of the blue. The
system practically hanged, only ICMP was working, had to reboot.Could
it be related to cpuspeed or amavisd (the latter seems unlikely)... ?

Aug 24 12:43:07 mail kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000051
Aug 24 12:43:07 mail kernel:  printing eip:
Aug 24 12:43:07 mail kernel: c01467fb
Aug 24 12:43:07 mail kernel: *pde = 03162001
Aug 24 12:43:07 mail kernel: Oops: 0000 [#1]
Aug 24 12:43:07 mail kernel: SMP
Aug 24 12:43:07 mail kernel: last sysfs file:
/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
Aug 24 12:43:07 mail kernel: Modules linked [..]
Aug 24 12:43:07 mail kernel: CPU:    0
Aug 24 12:43:07 mail kernel: EIP:    0060:[<c01467fb>]    Not tainted VLI
Aug 24 12:43:07 mail kernel: EFLAGS: 00210002   (2.6.15-1.2054_FC5smp #1)
[..]
Aug 24 12:43:07 mail kernel: Process amavisd (pid: 22608,
threadinfo=e9358000 task=f7d1ba30)
[..]
Aug 24 12:43:07 mail kernel: Call Trace:
Aug 24 12:43:07 mail kernel:  [<c0163762>]
__find_get_block_slow+0x38/0x114     [<c016422c>]
[..]
Aug 24 12:43:08 mail kernel: Code: 89 d8 5a 5b 5e 5f 5d c3 57 56 53 89
c3 89 d6 8d 78 10 89 f8 e8 82 ba 1a 00 83 c3 04 89 f2 89 d8 e8 53 cb
08 00 89 c3 85 c0 74 10 <8b> 00 89 da f6 c4 40 74 03 8b 53 0c f0 ff 42
04 89 f8 e8 ef b9
Aug 24 12:43:08 mail kernel: Continuing in 120 seconds... Continuing
in 1 seconds.
Aug 24 12:43:08 mail kernel:  <3>Debug: sleeping function called from invalid
 [..]

Re: kernel panic

[Samuel Díaz García]

Any idea at least?

Samuel Díaz García escribió:
> Iptables 1.3.5
> kernel 2.6.15.6
> 
> Any help?
> 
> Mar 30 00:31:01 fraile kernel: [17181150.312000] ip_nat_pptp version 3.0 
> unloaded
> Mar 30 00:31:01 fraile kernel: [17181150.492000] ctnetlink: 
> unregistering from nfnetlink.
> Mar 30 00:31:01 fraile kernel: [17181150.524000] ip_conntrack_pptp 
> version 3.1 unloaded
> Mar 30 00:31:01 fraile kernel: [17181150.688000] ctnetlink v0.90: 
> registering with nfnetlink.
> Mar 30 00:31:01 fraile kernel: [17181150.688000] Unable to handle kernel 
> paging request at virtual address e0c76e54
> Mar 30 00:31:01 fraile kernel: [17181150.688000]  printing eip:
> Mar 30 00:31:01 fraile kernel: [17181150.688000] c012a309
> Mar 30 00:31:01 fraile kernel: [17181150.688000] *pde = 1c9ac067
> Mar 30 00:31:01 fraile kernel: [17181150.688000] Oops: 0000 [#1]
> Mar 30 00:31:01 fraile kernel: [17181150.688000] Modules linked in: 
> ip_conntrack_netlink ip_conntrack_netbios_ns ip_conntrack_irc 
> ip_conntrack_h323 ip_conntrack_ftp ip_conntrack_amanda ipt_ipp2p 
> parport_pc lp parport ipt_mac ipt_connlimit iptable_filter 
> ipt_MASQUERADE iptable_nat ip_nat ipt_layer7 ipt_state ipt_MARK ipt_mark 
> ipt_CONNMARK ip_conntrack nfnetlink ipt_comment iptable_mangle ip_tables 
> police autofs4 it87 hwmon_vid hwmon eeprom i2c_isa bluetooth sunrpc 
> dm_mod video thermal processor fan container button battery ac ohci_hcd 
> shpchp i2c_sis630 i2c_sis96x i2c_core snd_intel8x0 snd_ac97_codec 
> snd_ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq 
> snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore 
> snd_page_alloc sis900 8139too 3c59x mii floppy ext3 jbd aacraid sd_mod 
> scsi_mod
> Mar 30 00:31:01 fraile kernel: [17181150.688000] CPU:    0
> Mar 30 00:31:01 fraile kernel: [17181150.688000] EIP: 
> 0060:[<c012a309>]    Tainted: GF     VLI
> Mar 30 00:31:01 fraile kernel: [17181150.688000] EFLAGS: 00010282 
> (2.6.15.6-ArcosCom)
> Mar 30 00:31:01 fraile kernel: [17181150.688000] EIP is at 
> notifier_chain_register+0x19/0x50
> Mar 30 00:31:01 fraile kernel: [17181150.688000] eax: e0c76e4c   ebx: 
> e0c114c0   ecx: ffffffff   edx: 00000000
> Mar 30 00:31:01 fraile kernel: [17181150.688000] esi: e0c40e4c   edi: 
> 0805e218   ebp: d174e000   esp: d174ff8c
> Mar 30 00:31:02 fraile kernel: [17181150.688000] ds: 007b   es: 007b ss: 
> 0068
> Mar 30 00:31:02 fraile kernel: [17181150.688000] Process modprobe (pid: 
> 4432, threadinfo=d174e000 task=d363f570)
> Mar 30 00:31:02 fraile kernel: [17181150.688000] Stack: 00000000 
> 0805e1f8 e0c2a05c e0c3f4c4 e0c2a0db e0c40f00 c0138a87 b7e9c008
> Mar 30 00:31:02 fraile kernel: [17181150.688000]        0805e1f8 
> b7e9c008 0805e1f8 c0103055 b7e9c008 00034380 0805e1f8 0805e1f8
> Mar 30 00:31:02 fraile kernel: [17181150.688000]        0805e218 
> bfd130b8 ffffffda 0000007b 0000007b 00000080 ffffe410 00000073
> Mar 30 00:31:02 fraile kernel: [17181150.688000] Call Trace:
> Mar 30 00:31:02 fraile kernel: [17181150.688000]  [<e0c2a05c>] 
> ctnetlink_init+0x5c/0xdb [ip_conntrack_netlink]
> Mar 30 00:31:02 fraile kernel: [17181150.688000]  [<c0138a87>] 
> sys_init_module+0xc7/0x1d0
> Mar 30 00:31:02 fraile kernel: [17181150.688000]  [<c0103055>] 
> syscall_call+0x7/0xb
> Mar 30 00:31:03 fraile kernel: [17181150.688000] Code: 00 e8 5c 54 24 00 
> b8 fe fd ff ff c3 90 90 90 90 90 90 56 89 d6 53 89 c3 b8 18 3c 3d c0 e8 
> 70 6b 24 00 8b 03 85 c0 74 1a 8b 56 08 <3b> 50 08 7f 12 89 f6 8d 58 04 
> 8b 40 04 85 c0 74 06 39 50 08 7d
> Mar 30 00:31:03 fraile kernel: [17181150.688000]  ip_conntrack_pptp 
> version 3.1 loaded
> Mar 30 00:31:03 fraile kernel: [17181150.840000] ip_nat_pptp version 3.0 
> loaded
> Mar 30 00:31:30 fraile kernel: [17181179.176000] ip_nat_pptp version 3.0 
> unloaded
> Mar 30 00:31:30 fraile kernel: [17181179.388000] ip_conntrack_pptp 
> version 3.1 unloaded
> Mar 30 00:31:30 fraile kernel: [17181179.556000] ip_conntrack_pptp 
> version 3.1 loaded
> 
> 

-- 
    Samuel Díaz García

kernel panic

[Samuel Díaz García]

Iptables 1.3.5
kernel 2.6.15.6

Any help?

Mar 30 00:31:01 fraile kernel: [17181150.312000] ip_nat_pptp version 3.0 
unloaded
Mar 30 00:31:01 fraile kernel: [17181150.492000] ctnetlink: 
unregistering from nfnetlink.
Mar 30 00:31:01 fraile kernel: [17181150.524000] ip_conntrack_pptp 
version 3.1 unloaded
Mar 30 00:31:01 fraile kernel: [17181150.688000] ctnetlink v0.90: 
registering with nfnetlink.
Mar 30 00:31:01 fraile kernel: [17181150.688000] Unable to handle kernel 
paging request at virtual address e0c76e54
Mar 30 00:31:01 fraile kernel: [17181150.688000]  printing eip:
Mar 30 00:31:01 fraile kernel: [17181150.688000] c012a309
Mar 30 00:31:01 fraile kernel: [17181150.688000] *pde = 1c9ac067
Mar 30 00:31:01 fraile kernel: [17181150.688000] Oops: 0000 [#1]
Mar 30 00:31:01 fraile kernel: [17181150.688000] Modules linked in: 
ip_conntrack_netlink ip_conntrack_netbios_ns ip_conntrack_irc 
ip_conntrack_h323 ip_conntrack_ftp ip_conntrack_amanda ipt_ipp2p 
parport_pc lp parport ipt_mac ipt_connlimit iptable_filter 
ipt_MASQUERADE iptable_nat ip_nat ipt_layer7 ipt_state ipt_MARK ipt_mark 
ipt_CONNMARK ip_conntrack nfnetlink ipt_comment iptable_mangle ip_tables 
police autofs4 it87 hwmon_vid hwmon eeprom i2c_isa bluetooth sunrpc 
dm_mod video thermal processor fan container button battery ac ohci_hcd 
shpchp i2c_sis630 i2c_sis96x i2c_core snd_intel8x0 snd_ac97_codec 
snd_ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq 
snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore 
snd_page_alloc sis900 8139too 3c59x mii floppy ext3 jbd aacraid sd_mod 
scsi_mod
Mar 30 00:31:01 fraile kernel: [17181150.688000] CPU:    0
Mar 30 00:31:01 fraile kernel: [17181150.688000] EIP: 
0060:[<c012a309>]    Tainted: GF     VLI
Mar 30 00:31:01 fraile kernel: [17181150.688000] EFLAGS: 00010282 
(2.6.15.6-ArcosCom)
Mar 30 00:31:01 fraile kernel: [17181150.688000] EIP is at 
notifier_chain_register+0x19/0x50
Mar 30 00:31:01 fraile kernel: [17181150.688000] eax: e0c76e4c   ebx: 
e0c114c0   ecx: ffffffff   edx: 00000000
Mar 30 00:31:01 fraile kernel: [17181150.688000] esi: e0c40e4c   edi: 
0805e218   ebp: d174e000   esp: d174ff8c
Mar 30 00:31:02 fraile kernel: [17181150.688000] ds: 007b   es: 007b 
ss: 0068
Mar 30 00:31:02 fraile kernel: [17181150.688000] Process modprobe (pid: 
4432, threadinfo=d174e000 task=d363f570)
Mar 30 00:31:02 fraile kernel: [17181150.688000] Stack: 00000000 
0805e1f8 e0c2a05c e0c3f4c4 e0c2a0db e0c40f00 c0138a87 b7e9c008
Mar 30 00:31:02 fraile kernel: [17181150.688000]        0805e1f8 
b7e9c008 0805e1f8 c0103055 b7e9c008 00034380 0805e1f8 0805e1f8
Mar 30 00:31:02 fraile kernel: [17181150.688000]        0805e218 
bfd130b8 ffffffda 0000007b 0000007b 00000080 ffffe410 00000073
Mar 30 00:31:02 fraile kernel: [17181150.688000] Call Trace:
Mar 30 00:31:02 fraile kernel: [17181150.688000]  [<e0c2a05c>] 
ctnetlink_init+0x5c/0xdb [ip_conntrack_netlink]
Mar 30 00:31:02 fraile kernel: [17181150.688000]  [<c0138a87>] 
sys_init_module+0xc7/0x1d0
Mar 30 00:31:02 fraile kernel: [17181150.688000]  [<c0103055>] 
syscall_call+0x7/0xb
Mar 30 00:31:03 fraile kernel: [17181150.688000] Code: 00 e8 5c 54 24 00 
b8 fe fd ff ff c3 90 90 90 90 90 90 56 89 d6 53 89 c3 b8 18 3c 3d c0 e8 
70 6b 24 00 8b 03 85 c0 74 1a 8b 56 08 <3b> 50 08 7f 12 89 f6 8d 58 04 
8b 40 04 85 c0 74 06 39 50 08 7d
Mar 30 00:31:03 fraile kernel: [17181150.688000]  ip_conntrack_pptp 
version 3.1 loaded
Mar 30 00:31:03 fraile kernel: [17181150.840000] ip_nat_pptp version 3.0 
loaded
Mar 30 00:31:30 fraile kernel: [17181179.176000] ip_nat_pptp version 3.0 
unloaded
Mar 30 00:31:30 fraile kernel: [17181179.388000] ip_conntrack_pptp 
version 3.1 unloaded
Mar 30 00:31:30 fraile kernel: [17181179.556000] ip_conntrack_pptp 
version 3.1 loaded


-- 
    Samuel Díaz García

kernel panic

[Rogel Miguez]

That I should make?
I have problems with the compiled kernel:
I compiled the kernel 2.6.13.4
with make allnocoonfig,
with make allyesconfig,
with make defconfig,
the LILO is generated automatically

and when I restart the computer, it shows me the following error:


kernel panic - not syncing : VFS : Unable to mount root fs on
unknown-block (0,0)


Rogel
-------------------------
Que debo hacer?
Tengo problemas con el kernel compilado:
Yo compilé el kernel 2.6.13.4
con make allnocoonfig,
con make allyesconfig,
con make defconfig,
se genera el LILO automaticamente

y cuando reinicio la computadora, me muestra el siguiente error.

kernel panic - not syncing : VFS : Unable to mount root fs on
unknown-block (0,0)

Rogel

Kernel panic

[sharad]

[-- Attachment #1: Type: text/plain, Size: 669 bytes --]

Hi everyone,
 I am using AU1200 board and trying to boot through NFS.Kernel boots but shows a panic after some time..
Following is the screen shot of it:-

TCP: Hash tables configured (established 2048 bind 2048)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or unknown-block(2,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)


Can anyone help me please

Thanks in advance
sharad

[-- Attachment #2: Type: text/html, Size: 1417 bytes --]

Re: kernel panic

[Robert Hancock]

manomugdha biswas wrote:
> Hi,
> I am using the following makefile and the .c file to
> generate a kernel module. I can load this module
> without error and warning. But when I call ioctl()
> from user application to run this module it gets
> kernel panic!

I think there's something wrong with the way you're using the wait queue 
(they're not normally instantiated as local variables on the stack, for 
one thing). It looks like you're just using it to create a delay, in 
that case use schedule_timeout, msleep, etc.

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

kernel panic

[manomugdha biswas]

[-- Attachment #1: Type: text/plain, Size: 3113 bytes --]

Hi,
I am using the following makefile and the .c file to
generate a kernel module. I can load this module
without error and warning. But when I call ioctl()
from user application to run this module it gets
kernel panic!

I am using redhat 9.0 and kernel 2.4.20-8.

testmngmnt.c:
=============
This file has been attached with this mail.

Makefile:
=========
# set the approriate value for additional cflags
GCC_VER := $(strip $(shell gcc -dumpversion))
XTRA_CFLAGS =
ifeq ($(GCC_VER), 3.2.2)
XTRA_CFLAGS = -DRH_9_0
endif # GCC_VER
ifeq ($(GCC_VER), 3.2.3)
XTRA_CFLAGS = -DRH_9_0
endif # GCC_VER
                                                      
                         
CC  = gcc
LD  = ld
LDFLAG = -r
LINUX_VERSION = linux-$(shell uname -r)
                                                      
                         
CFLAGS  = -g  -Wall -DMODULE -O2 -D__KERNEL__
$(XTRA_CFLAGS) -DLINK_ETHERNET \
    -I/usr/src/$(LINUX_VERSION)/include -I${INCLUDE}
-D__DEBUG__
                                                      
                         
dvr_objs = testmngmnt.o
                                                      
                         
                                                      
                         
test.o: ${dvr_objs}
  ld -X -r -o test.o ${dvr_objs} ; \
                                                      
                         
testmngmnt.o:  testmngmnt.c
  ${CC} ${CFLAGS} -c testmngmnt.c
                                                      
                         
clean:
  rm -f *.o *~ include/*~
                                                      
                         
all: test.o



Kernel panic dump:
==================
Unable to handle kernel NULL pointer dereference at
virtual address 00000005
 printing eip:
c0118ffd
*pde = 00000000
Oops: 0002
test soundcore ide-cd cdrom i830 agpgart parport_pc lp
parport cisco_ipsec autofs 8139too mii keybdev
mousedev hid input usb-uhci ehci-hcd usbcore ext3 jbd
CPU:    0
EIP:    0060:[<c0118ffd>]    Tainted: P
EFLAGS: 00210086
 
EIP is at interruptible_sleep_on_timeout [kernel] 0x2d
(2.4.20-8)
eax: f4f31f78   ebx: 00200286   ecx: f4f31f50   edx:
00000001
esi: 00000002   edi: f5050300   ebp: f4f31f60   esp:
f4f31f48
ds: 0068   es: 0068   ss: 0068
Process vnicClientMirro (pid: 4971,
stackpage=f4f31000)
Stack: 00000000 f4f30000 f5113980 f5113980 0000001d
00000000 f4f31f90 f8fe60b8
       f8fe615c 0000001d f5113fa4 f5113700 00000001
f4f31f7c f4f31f7c 00000000
       00000002 ffffffe7 00000003 c01566e9 bfffd880
f5050300 00000000 bfffd880
Call Trace:   [<f8fe60b8>] VNICClientStart [test] 0x58
(0xf4f31f64))
[<f8fe615c>] .rodata.str1.1 [test] 0x2c (0xf4f31f68))
[<c01566e9>] sys_ioctl [kernel] 0xc9 (0xf4f31f94))
[<c0109537>] system_call [kernel] 0x33 (0xf4f31fc0))
 
 
Code: 89 4a 04 89 55 f0 89 45 f4 89 08 89 f0 e8 a1 cb
00 00 89 c6

Could you please give some light on this issue?

Regards,
Manomugdhab

Manomugdha Biswas


		
_______________________________________________________ 
Too much spam in your inbox? Yahoo! Mail gives you the best spam protection for FREE! http://in.mail.yahoo.com

[-- Attachment #2: 3024876882-testmngmnt.c --]
[-- Type: application/octet-stream, Size: 2042 bytes --]

/*
  
  Copyright (c) Ixia 2003-2005
  All rights reserved.

*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <net/tcp.h>
#include <linux/skbuff.h>
#include <asm/uaccess.h>
#include <linux/netdevice.h>


int                 sClientMajorNum = 0;
static int VNICClientIoctl(struct inode *inode, struct file *file,
                           unsigned int cmd, unsigned long arg);

static int VNICClientStart(unsigned long arg);

static struct file_operations VNICFops = {
        owner:          THIS_MODULE,
        ioctl:          VNICClientIoctl
};

static int
VNICClientStart(unsigned long arg)
{
  unsigned int               retryCnt   = 30;
  DECLARE_WAIT_QUEUE_HEAD(wq);
  init_waitqueue_head(&wq);
      
  printk("\nretry count ----- : %d\n", retryCnt);
  while (retryCnt) {
    --retryCnt;
  printk("\nretry count : %d\n", retryCnt);

   if (!retryCnt) {
     return -1; 
   } 

   /* wait for small */
   printk("\n++++before sleep+++\n");
   interruptible_sleep_on_timeout(&wq, 2); 
   printk("\n++++after sleep+++\n");
  } /* end while (retryCnt)*/
  return 0; /* for success */
} /* end VNICClientStart() */

static int
VNICClientIoctl(struct inode *inode, struct file *file,
              unsigned int cmd, unsigned long arg)
{
  
  switch (cmd) {
    //case VNIC_CLIENT_START:
    case 0:
      return VNICClientStart(arg);
      break;
    default :
      return 0 ;
      break;
  } /* End of switch */

  return 0; /* VNIC_IOCTL_SUCCESS */
}

int __init
VNICClientModuleInit(void)
{
  /* register the character device */
  sClientMajorNum = register_chrdev(0, "VNICClient", &VNICFops);
  if (sClientMajorNum < 0) {
    return -EIO;
  }
  return 0;
}

void 
VNICClientModuleCleanUp(void)
{
  /* unRegiter the character device(); */
  unregister_chrdev(sClientMajorNum, "VNICClient");
}

module_init(VNICClientModuleInit);
module_exit(VNICClientModuleCleanUp);

#ifdef MODULE_LICENSE
  MODULE_LICENSE("GPL"); 
#endif /* MODULE_LICENSE */

RE: kernel panic

[James Harper]

> 
> Have you got a serial line on the machine? If so, if you have a
> debug build we should be getting interesting debugging.
> 
> Also, before trying to destroy the domain, hit ctrl-A three times
> and then 'q' and 'o'.
> 
> This will do an audit of all the domain's remaining memory, and
> might give us a clue as to what is broken.
> 
> Even more informative might be to add a call to audit_domains()
> in the "Bad page free for domain" error path in
xen/common/dom_mem_ops.c

Unfortunately I don't have any time to maintain this machine currently -
it's in the office and I'm not. So I've disabled wpt and am testing
without.

Would it be possible to have xen hook into the syslog facility of dom0,
which could then be relayed to another server? Most likely dom0 would be
too broken by this point to be able to function in this way though.

> What are you doing in the domains that's causing this bug? We've
> tried to reproduce but can't so far.

The domain that is crashing is a mail server. It's running exim4 + cyrus
+ mailscanner (+ sendmail + razor + clamav), so it works reasonably hard
but is still just doing disk and network io, nothing really special.

Would that error be caused by it running out of memory? I've not seen it
even get close to that though, but if a lot of large emails came in in
one hit it could happen...

James


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php

Re: kernel panic

[Ian Pratt]

> > Yes, there seems to be a nasty bug that possibly involves writable
> > page tables (noone has reported the bug with writable page tables
> > disabled in the kernel configuration).
> 
> I'm building now with wpt disabled. I'll let you know how it goes. In
> addition, trying to clean up the crashed domain with 'xm destroy <name>'
> caused dom0 and therefore the whole machine to reboot.

Have you got a serial line on the machine? If so, if you have a
debug build we should be getting interesting debugging.

Also, before trying to destroy the domain, hit ctrl-A three times
and then 'q' and 'o'.

This will do an audit of all the domain's remaining memory, and
might give us a clue as to what is broken.

Even more informative might be to add a call to audit_domains()
in the "Bad page free for domain" error path in xen/common/dom_mem_ops.c

What are you doing in the domains that's causing this bug? We've
tried to reproduce but can't so far.

Thanks,
Ian


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php

Re: kernel panic

[elijah wright]

> I've a s3c2410 board (BAST architecture), I've compilated a kernel 
> 2.6.8.1 with patch 2.6.9-rc2 e patch 2.6.9-rc2-bk12. But the board don't 
> start with NFS (with kernel 2.4.26, yes). My configuration is:

> # CONFIG_ARTHUR is not set
> CONFIG_CMDLINE="root=/dev/nfs rw nfsroot=143.225.229.44:/board ip=dhcp init/bin/bash
> console=ttySAC0"

> NET: Registered protocol family 17
> IP-Config: No network devices available.

this looks like your problem to me.  where's your network?  =)

elijah


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
NFS maillist  -  NFS@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nfs

Re: kernel panic

[Keir Fraser]

> > Yes, there seems to be a nasty bug that possibly involves writable
> > page tables (noone has reported the bug with writable page tables
> > disabled in the kernel configuration).
> 
> I'm building now with wpt disabled. I'll let you know how it goes. In
> addition, trying to clean up the crashed domain with 'xm destroy <name>'
> caused dom0 and therefore the whole machine to reboot.

Yes, there is definitely a reference-counting bug in Xen. Once a
guest prints out that particular message, it really is time to reboot
the machine!

> > I've increased the headroom allocated for received packets in teh
> > frontend driver. It should get rid of the messages.
> 
> Is it just an informative message or is it telling me that something is
> wrong?

Informative, as the packet gets copied into a buffer that is big
enough. I just wanted to know how large the buffers should be that I
allocate for received packets -- I want to make it small enough that
buffer accounting in the sockets layer isn't thrown off, but large
enough that packets don't have to be copied to fit. The message tells
me that my chosen size was a bit too small.

 -- Keir


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php

RE: kernel panic

[James Harper]

> Yes, there seems to be a nasty bug that possibly involves writable
> page tables (noone has reported the bug with writable page tables
> disabled in the kernel configuration).

I'm building now with wpt disabled. I'll let you know how it goes. In
addition, trying to clean up the crashed domain with 'xm destroy <name>'
caused dom0 and therefore the whole machine to reboot.
 
> I've increased the headroom allocated for received packets in teh
> frontend driver. It should get rid of the messages.

Is it just an informative message or is it telling me that something is
wrong?

Thanks

James


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php

Re: kernel panic

[Keir Fraser]

> I've seen this error a few times recently:
> "Kernel panic: Unable to reduce memory reservation
> In interrupt handler - not syncing"

Yes, there seems to be a nasty bug that possibly involves writable
page tables (noone has reported the bug with writable page tables
disabled in the kernel configuration). 
 
> And quite a few of these:
> "Received packet needs 52 bytes more headroom."
> 
> The first one is obviously a bit of a problem. Does the second one
> matter?

I've increased the headroom allocated for received packets in teh
frontend driver. It should get rid of the messages.

 -- Keir


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php

kernel panic

[James Harper]

I've seen this error a few times recently:
"Kernel panic: Unable to reduce memory reservation

In interrupt handler - not syncing"

And quite a few of these:
"Received packet needs 52 bytes more headroom."

The first one is obviously a bit of a problem. Does the second one
matter?
 
James


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php

Re: kernel panic

[Josh Boyer]

On Mon, 2004-09-27 at 04:08, lp4u@inwind.it wrote:
> Hi, 
>  
> I've a s3c2410 board (BAST architecture), I've compilated a kernel 2.6.8.1 with patch 2.6.9-rc2 e 
> patch 2.6.9-rc2-bk12. But the board don't start with NFS (with kernel 2.4.26, yes). My 
> configuration is: 
>  

Um..  what does all of this have to do with MTD?  Maybe you are asking
on the wrong list... :)

josh

Re: kernel panic

[Frank Steiner]

lp4u@inwind.it wrote

> IP-Config: No network devices available. 

Looks like there is not support for your network card compiled into the kernel.

-- 
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049
* Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
NFS maillist  -  NFS@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nfs

kernel panic

[lp4u]

Hi, 
 
I've a s3c2410 board (BAST architecture), I've compilated a kern=
el 2.6.8.1 with patch 2.6.9-rc2 e 
patch 2.6.9-rc2-bk12. But the board d=
on't start with NFS (with kernel 2.4.26, yes). My 
configuration is: =0D
=
 
# 
# Automatically generated make config: don't edit 
# Linux kernel=
 version: 2.6.8.1 
# Mon Sep 27 10:41:24 2004 
# 
CONFIG_ARM=3Dy 
CON=
FIG_MMU=3Dy 
CONFIG_UID16=3Dy 
CONFIG_RWSEM_GENERIC_SPINLOCK=3Dy 
CONF=
IG_GENERIC_IOMAP=3Dy 
 
# 
# Code maturity level options 
# 
CONFIG_=
EXPERIMENTAL=3Dy 
# CONFIG_CLEAN_COMPILE is not set 
CONFIG_BROKEN=3Dy =

CONFIG_BROKEN_ON_SMP=3Dy 
 
# 
# General setup 
# 
CONFIG_LOCALVER=
SION=3D"" 
CONFIG_SWAP=3Dy 
CONFIG_SYSVIPC=3Dy 
# CONFIG_POSIX_MQUEUE =
is not set 
# CONFIG_BSD_PROCESS_ACCT is not set 
CONFIG_SYSCTL=3Dy =0D
=
# CONFIG_AUDIT is not set 
CONFIG_LOG_BUF_SHIFT=3D17 
# CONFIG_HOTPLUG =
is not set 
# CONFIG_IKCONFIG is not set 
# CONFIG_EMBEDDED is not set =

CONFIG_KALLSYMS=3Dy 
# CONFIG_KALLSYMS_ALL is not set 
# CONFIG_KALLS=
YMS_EXTRA_PASS is not set 
CONFIG_FUTEX=3Dy 
CONFIG_EPOLL=3Dy 
CONFIG_=
IOSCHED_NOOP=3Dy 
CONFIG_IOSCHED_AS=3Dy 
CONFIG_IOSCHED_DEADLINE=3Dy =0D
=
CONFIG_IOSCHED_CFQ=3Dy 
CONFIG_CC_OPTIMIZE_FOR_SIZE=3Dy 
CONFIG_SHMEM=3D=
y 
# CONFIG_TINY_SHMEM is not set 
 
# 
# Loadable module support =0D
=
# 
CONFIG_MODULES=3Dy 
# CONFIG_MODULE_UNLOAD is not set 
CONFIG_OBSOL=
ETE_MODPARM=3Dy 
# CONFIG_MODVERSIONS is not set 
CONFIG_KMOD=3Dy 
 =0D
=
# 
# System Type 
# 
# CONFIG_ARCH_CLPS7500 is not set 
# CONFIG_ARCH=
_CLPS711X is not set 
# CONFIG_ARCH_CO285 is not set 
# CONFIG_ARCH_EBS=
A110 is not set 
# CONFIG_ARCH_CAMELOT is not set 
# CONFIG_ARCH_FOOTBR=
IDGE is not set 
# CONFIG_ARCH_INTEGRATOR is not set 
# CONFIG_ARCH_IOP=
3XX is not set 
# CONFIG_ARCH_IXP4XX is not set 
# CONFIG_ARCH_IXP2000 =
is not set 
# CONFIG_ARCH_L7200 is not set 
# CONFIG_ARCH_PXA is not se=
t 
# CONFIG_ARCH_RPC is not set 
# CONFIG_ARCH_SA1100 is not set 
CONF=
IG_ARCH_S3C2410=3Dy 
# CONFIG_ARCH_SHARK is not set 
# CONFIG_ARCH_LH7A=
40X is not set 
# CONFIG_ARCH_OMAP is not set 
# CONFIG_ARCH_VERSATILE_=
PB is not set 
# CONFIG_ARCH_IMX is not set 
 
# 
# S3C24XX Implement=
ations 
# 
CONFIG_ARCH_BAST=3Dy 
# CONFIG_ARCH_H1940 is not set 
# CO=
NFIG_ARCH_SMDK2410 is not set 
# CONFIG_MACH_VR1000 is not set 
CONFIG_=
CPU_S3C2410=3Dy 
 
# 
# S3C2410 Setup 
# 
CONFIG_S3C2410_DMA=3Dy =0D
=
# CONFIG_S3C2410_DMA_DEBUG is not set 
 
# 
# Processor Type 
# 
CON=
FIG_CPU_32=3Dy 
CONFIG_CPU_ARM920T=3Dy 
CONFIG_CPU_32v4=3Dy 
CONFIG_CP=
U_ABRT_EV4T=3Dy 
CONFIG_CPU_CACHE_V4WT=3Dy 
CONFIG_CPU_COPY_V4WB=3Dy =0D
=
CONFIG_CPU_TLB_V4WBI=3Dy 
 
# 
# Processor Features 
# 
# CONFIG_ARM=
_THUMB is not set 
# CONFIG_CPU_ICACHE_DISABLE is not set 
# CONFIG_CPU=
_DCACHE_DISABLE is not set 
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set =

 
# 
# General setup 
# 
# CONFIG_ZBOOT_ROM is not set 
CONFIG_ZBO=
OT_ROM_TEXT=3D0x0 
CONFIG_ZBOOT_ROM_BSS=3D0x0 
 
# 
# At least one ma=
th emulation must be selected 
# 
CONFIG_FPE_NWFPE=3Dy 
CONFIG_FPE_NWF=
PE_XP=3Dy 
# CONFIG_FPE_FASTFPE is not set 
CONFIG_BINFMT_ELF=3Dy 
CON=
FIG_BINFMT_AOUT=3Dy 
# CONFIG_BINFMT_MISC is not set 
 
# 
# Generic =
Driver Options 
# 
CONFIG_STANDALONE=3Dy 
CONFIG_PREVENT_FIRMWARE_BUIL=
D=3Dy 
# CONFIG_DEBUG_DRIVER is not set 
# CONFIG_PM is not set 
# CON=
FIG_PREEMPT is not set 
# CONFIG_ARTHUR is not set 
CONFIG_CMDLINE=3D"r=
oot=3D/dev/nfs rw nfsroot=3D143.225.229.44:/board ip=3Ddhcp init/bin/bash=
 
console=3DttySAC0" 
CONFIG_ALIGNMENT_TRAP=3Dy 
 
# 
# Parallel por=
t support 
# 
CONFIG_PARPORT=3Dy 
CONFIG_PARPORT_PC=3Dy 
CONFIG_PARPO=
RT_PC_CML1=3Dy 
CONFIG_PARPORT_PC_FIFO=3Dy 
CONFIG_PARPORT_PC_SUPERIO=3D=
y 
# CONFIG_PARPORT_ARC is not set 
CONFIG_PARPORT_OTHER=3Dy 
CONFIG_P=
ARPORT_1284=3Dy 
 
# 
# Memory Technology Devices (MTD) 
# 
CONFIG_M=
TD=3Dy 
# CONFIG_MTD_DEBUG is not set 
# CONFIG_MTD_PARTITIONS is not s=
et 
# CONFIG_MTD_CONCAT is not set 
 
# 
# User Modules And Translati=
on Layers 
# 
CONFIG_MTD_CHAR=3Dy 
CONFIG_MTD_BLOCK=3Dy 
# CONFIG_FTL=
 is not set 
# CONFIG_NFTL is not set 
# CONFIG_INFTL is not set 
 =0D
=
# 
# RAM/ROM/Flash chip drivers 
# 
CONFIG_MTD_CFI=3Dy 
# CONFIG_MTD_=
JEDECPROBE is not set 
CONFIG_MTD_GEN_PROBE=3Dy 
# CONFIG_MTD_CFI_ADV_O=
PTIONS is not set 
CONFIG_MTD_MAP_BANK_WIDTH_1=3Dy 
CONFIG_MTD_MAP_BANK=
_WIDTH_2=3Dy 
CONFIG_MTD_MAP_BANK_WIDTH_4=3Dy 
# CONFIG_MTD_MAP_BANK_WI=
DTH_8 is not set 
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set 
# CONFIG_M=
TD_MAP_BANK_WIDTH_32 is not set 
CONFIG_MTD_CFI_I1=3Dy 
CONFIG_MTD_CFI_=
I2=3Dy 
# CONFIG_MTD_CFI_I4 is not set 
# CONFIG_MTD_CFI_I8 is not set =

CONFIG_MTD_CFI_INTELEXT=3Dy 
# CONFIG_MTD_CFI_AMDSTD is not set 
# CO=
NFIG_MTD_CFI_STAA is not set 
CONFIG_MTD_CFI_UTIL=3Dy 
# CONFIG_MTD_RAM=
 is not set 
# CONFIG_MTD_ROM is not set 
# CONFIG_MTD_ABSENT is not se=
t 
# CONFIG_MTD_OBSOLETE_CHIPS is not set 
 
# 
# Mapping drivers for=
 chip access 
# 
# CONFIG_MTD_COMPLEX_MAPPINGS is not set 
# CONFIG_MT=
D_PHYSMAP is not set 
# CONFIG_MTD_ARM_INTEGRATOR is not set 
# CONFIG_=
MTD_EDB7312 is not set 
 
# 
# Self-contained MTD device drivers 
# =0D
=
# CONFIG_MTD_SLRAM is not set 
# CONFIG_MTD_PHRAM is not set 
# CONFIG_=
MTD_MTDRAM is not set 
# CONFIG_MTD_BLKMTD is not set 
 
# 
# Disk-On=
-Chip Device Drivers 
# 
# CONFIG_MTD_DOC2000 is not set 
# CONFIG_MTD=
_DOC2001 is not set 
# CONFIG_MTD_DOC2001PLUS is not set 
 
# 
# NAND=
 Flash Device Drivers 
# 
# CONFIG_MTD_NAND is not set 
 
# 
# Plug =
and Play support 
# 
 
# 
# Block devices 
# 
# CONFIG_BLK_DEV_FD i=
s not set 
# CONFIG_PARIDE is not set 
CONFIG_BLK_DEV_LOOP=3Dy 
# CONF=
IG_BLK_DEV_CRYPTOLOOP is not set 
CONFIG_BLK_DEV_NBD=3Dy 
CONFIG_BLK_DE=
V_RAM=3Dy 
CONFIG_BLK_DEV_RAM_SIZE=3D4096 
CONFIG_BLK_DEV_INITRD=3Dy =0D
=
 
# 
# Multi-device support (RAID and LVM) 
# 
# CONFIG_MD is not set=
 
 
# 
# Networking support 
# 
CONFIG_NET=3Dy 
 
# 
# Networking=
 options 
# 
CONFIG_PACKET=3Dy 
CONFIG_PACKET_MMAP=3Dy 
CONFIG_NETLIN=
K_DEV=3Dy 
CONFIG_UNIX=3Dy 
# CONFIG_NET_KEY is not set 
CONFIG_INET=3D=
y 
CONFIG_IP_MULTICAST=3Dy 
# CONFIG_IP_ADVANCED_ROUTER is not set 
CO=
NFIG_IP_PNP=3Dy 
CONFIG_IP_PNP_DHCP=3Dy 
CONFIG_IP_PNP_BOOTP=3Dy 
CONF=
IG_IP_PNP_RARP=3Dy 
# CONFIG_NET_IPIP is not set 
# CONFIG_NET_IPGRE is=
 not set 
# CONFIG_IP_MROUTE is not set 
# CONFIG_ARPD is not set 
# C=
ONFIG_SYN_COOKIES is not set 
# CONFIG_INET_AH is not set 
# CONFIG_INE=
T_ESP is not set 
# CONFIG_INET_IPCOMP is not set 
# CONFIG_INET_TUNNEL=
 is not set 
 
# 
# IP: Virtual Server Configuration 
# 
# CONFIG_IP=
_VS is not set 
# CONFIG_IPV6 is not set 
CONFIG_NETFILTER=3Dy 
CONFIG=
_NETFILTER_DEBUG=3Dy 
 
# 
# IP: Netfilter Configuration 
# 
# CONFI=
G_IP_NF_CONNTRACK is not set 
# CONFIG_IP_NF_QUEUE is not set 
# CONFIG=
_IP_NF_IPTABLES is not set 
# CONFIG_IP_NF_ARPTABLES is not set 
# CONF=
IG_IP_NF_COMPAT_IPCHAINS is not set 
# CONFIG_IP_NF_COMPAT_IPFWADM is no=
t set 
 
# 
# SCTP Configuration (EXPERIMENTAL) 
# 
# CONFIG_IP_SCTP=
 is not set 
# CONFIG_ATM is not set 
# CONFIG_BRIDGE is not set 
# CO=
NFIG_VLAN_8021Q is not set 
# CONFIG_DECNET is not set 
# CONFIG_LLC2 i=
s not set 
# CONFIG_IPX is not set 
# CONFIG_ATALK is not set 
# CONFI=
G_X25 is not set 
# CONFIG_LAPB is not set 
# CONFIG_NET_DIVERT is not =
set 
# CONFIG_ECONET is not set 
# CONFIG_WAN_ROUTER is not set 
# CON=
FIG_NET_HW_FLOWCONTROL is not set 
 
# 
# QoS and/or fair queueing =0D
=
# 
# CONFIG_NET_SCHED is not set 
# CONFIG_NET_CLS_ROUTE is not set =0D
=
 
# 
# Network testing 
# 
# CONFIG_NET_PKTGEN is not set 
# CONFIG_=
NETPOLL is not set 
# CONFIG_NET_POLL_CONTROLLER is not set 
# CONFIG_H=
AMRADIO is not set 
# CONFIG_IRDA is not set 
# CONFIG_BT is not set =0D
=
CONFIG_NETDEVICES=3Dy 
# CONFIG_DUMMY is not set 
# CONFIG_BONDING is n=
ot set 
# CONFIG_EQUALIZER is not set 
# CONFIG_TUN is not set 
# CONF=
IG_ETHERTAP is not set 
 
# 
# Ethernet (10 or 100Mbit) 
# 
CONFIG_N=
ET_ETHERNET=3Dy 
CONFIG_MII=3Dy 
CONFIG_SMC91X=3Dy 
 
# 
# Ethernet =
(1000 Mbit) 
# 
 
# 
# Ethernet (10000 Mbit) 
# 
 
# 
# Token Rin=
g devices 
# 
 
# 
# Wireless LAN (non-hamradio) 
# 
# CONFIG_NET_R=
ADIO is not set 
 
# 
# Wan interfaces 
# 
# CONFIG_WAN is not set =0D
=
# CONFIG_PLIP is not set 
# CONFIG_PPP is not set 
CONFIG_SLIP=3Dy 
CO=
NFIG_SLIP_COMPRESSED=3Dy 
CONFIG_SLIP_SMART=3Dy 
CONFIG_SLIP_MODE_SLIP6=
=3Dy 
# CONFIG_SHAPER is not set 
# CONFIG_NETCONSOLE is not set 
 =0D
=
# 
# ATA/ATAPI/MFM/RLL support 
# 
CONFIG_IDE=3Dy 
CONFIG_BLK_DEV_IDE=
=3Dy 
 
# 
# Please see Documentation/ide.txt for help/info on IDE dri=
ves 
# 
# CONFIG_BLK_DEV_IDE_SATA is not set 
CONFIG_BLK_DEV_IDEDISK=3D=
y 
# CONFIG_IDEDISK_MULTI_MODE is not set 
CONFIG_BLK_DEV_IDECD=3Dy =0D
=
CONFIG_BLK_DEV_IDETAPE=3Dm 
CONFIG_BLK_DEV_IDEFLOPPY=3Dm 
# CONFIG_IDE_=
TASK_IOCTL is not set 
# CONFIG_IDE_TASKFILE_IO is not set 
 
# 
# ID=
E chipset support/bugfixes 
# 
CONFIG_IDE_GENERIC=3Dy 
# CONFIG_IDE_AR=
M is not set 
# CONFIG_BLK_DEV_IDEDMA is not set 
# CONFIG_IDEDMA_AUTO =
is not set 
# CONFIG_BLK_DEV_HD is not set 
 
# 
# SCSI device suppor=
t 
# 
# CONFIG_SCSI is not set 
 
# 
# Fusion MPT device support =0D
=
# 
 
# 
# IEEE 1394 (FireWire) support 
# 
# CONFIG_IEEE1394 is not =
set 
 
# 
# I2O device support 
# 
 
# 
# ISDN subsystem 
# 
# C=
ONFIG_ISDN is not set 
 
# 
# Input device support 
# 
CONFIG_INPUT=3D=
y 
 
# 
# Userland interfaces 
# 
CONFIG_INPUT_MOUSEDEV=3Dy 
CONFIG=
_INPUT_MOUSEDEV_PSAUX=3Dy 
CONFIG_INPUT_MOUSEDEV_SCREEN_X=3D1024 
CONFI=
G_INPUT_MOUSEDEV_SCREEN_Y=3D768 
# CONFIG_INPUT_JOYDEV is not set 
# CO=
NFIG_INPUT_TSDEV is not set 
# CONFIG_INPUT_EVDEV is not set 
# CONFIG_=
INPUT_EVBUG is not set 
 
# 
# Input I/O drivers 
# 
# CONFIG_GAMEPO=
RT is not set 
CONFIG_SOUND_GAMEPORT=3Dy 
CONFIG_SERIO=3Dy 
CONFIG_SER=
IO_SERPORT=3Dy 
# CONFIG_SERIO_CT82C710 is not set 
# CONFIG_SERIO_PARK=
BD is not set 
# CONFIG_SERIO_RAW is not set 
 
# 
# Input Device Dri=
vers 
# 
CONFIG_INPUT_KEYBOARD=3Dy 
# CONFIG_KEYBOARD_ATKBD is not set=
 
# CONFIG_KEYBOARD_SUNKBD is not set 
# CONFIG_KEYBOARD_LKKBD is not s=
et 
# CONFIG_KEYBOARD_XTKBD is not set 
# CONFIG_KEYBOARD_NEWTON is not=
 set 
CONFIG_INPUT_MOUSE=3Dy 
CONFIG_MOUSE_PS2=3Dy 
# CONFIG_MOUSE_SER=
IAL is not set 
# CONFIG_MOUSE_VSXXXAA is not set 
# CONFIG_INPUT_JOYST=
ICK is not set 
# CONFIG_INPUT_TOUCHSCREEN is not set 
# CONFIG_INPUT_M=
ISC is not set 
 
# 
# Character devices 
# 
CONFIG_VT=3Dy 
CONFIG_=
VT_CONSOLE=3Dy 
CONFIG_HW_CONSOLE=3Dy 
CONFIG_SERIAL_NONSTANDARD=3Dy =0D
=
# CONFIG_COMPUTONE is not set 
# CONFIG_ROCKETPORT is not set 
# CONFIG=
_CYCLADES is not set 
# CONFIG_DIGIEPCA is not set 
# CONFIG_DIGI is no=
t set 
# CONFIG_MOXA_INTELLIO is not set 
# CONFIG_MOXA_SMARTIO is not =
set 
# CONFIG_SYNCLINKMP is not set 
# CONFIG_N_HDLC is not set 
# CON=
FIG_RISCOM8 is not set 
# CONFIG_SPECIALIX is not set 
# CONFIG_SX is n=
ot set 
# CONFIG_RIO is not set 
# CONFIG_STALDRV is not set 
 
# =0D
=
# Serial drivers 
# 
CONFIG_SERIAL_8250=3Dy 
CONFIG_SERIAL_8250_CONSOL=
E=3Dy 
CONFIG_SERIAL_8250_NR_UARTS=3D8 
CONFIG_SERIAL_8250_EXTENDED=3Dy=
 
CONFIG_SERIAL_8250_MANY_PORTS=3Dy 
CONFIG_SERIAL_8250_SHARE_IRQ=3Dy =0D
=
# CONFIG_SERIAL_8250_DETECT_IRQ is not set 
# CONFIG_SERIAL_8250_MULTIPO=
RT is not set 
# CONFIG_SERIAL_8250_RSA is not set 
 
# 
# Non-8250 s=
erial port support 
# 
CONFIG_SERIAL_S3C2410=3Dy 
CONFIG_SERIAL_S3C241=
0_CONSOLE=3Dy 
# CONFIG_SERIAL_BAST_SIO is not set 
CONFIG_SERIAL_CORE=3D=
y 
CONFIG_SERIAL_CORE_CONSOLE=3Dy 
CONFIG_UNIX98_PTYS=3Dy 
CONFIG_LEGA=
CY_PTYS=3Dy 
CONFIG_LEGACY_PTY_COUNT=3D256 
CONFIG_PRINTER=3Dy 
# CONF=
IG_LP_CONSOLE is not set 
CONFIG_PPDEV=3Dy 
# CONFIG_TIPAR is not set =0D
=
 
# 
# IPMI 
# 
# CONFIG_IPMI_HANDLER is not set 
 
# 
# Watchdog =
Cards 
# 
# CONFIG_WATCHDOG is not set 
# CONFIG_NVRAM is not set 
CO=
NFIG_RTC=3Dy 
# CONFIG_DTLK is not set 
# CONFIG_R3964 is not set 
 =0D
=
# 
# Ftape, the floppy tape device driver 
# 
# CONFIG_DRM is not set =

# CONFIG_RAW_DRIVER is not set 
 
# 
# I2C support 
# 
CONFIG_I2C=3D=
y 
CONFIG_I2C_CHARDEV=3Dm 
 
# 
# I2C Algorithms 
# 
CONFIG_I2C_ALG=
OBIT=3Dm 
# CONFIG_I2C_ALGOPCF is not set 
# CONFIG_I2C_ALGOPCA is not =
set 
 
# 
# I2C Hardware Bus support 
# 
# CONFIG_I2C_AMD756 is not =
set 
# CONFIG_I2C_AMD8111 is not set 
# CONFIG_I2C_ISA is not set 
# C=
ONFIG_I2C_PARPORT is not set 
# CONFIG_I2C_PARPORT_LIGHT is not set 
# =
CONFIG_SCx200_ACB is not set 
# CONFIG_I2C_PCA_ISA is not set 
 
# =0D
=
# Hardware Sensors Chip support 
# 
CONFIG_I2C_SENSOR=3Dm 
# CONFIG_SE=
NSORS_ADM1021 is not set 
# CONFIG_SENSORS_ADM1025 is not set 
# CONFIG=
_SENSORS_ADM1031 is not set 
# CONFIG_SENSORS_ASB100 is not set 
# CONF=
IG_SENSORS_DS1621 is not set 
# CONFIG_SENSORS_FSCHER is not set 
# CON=
FIG_SENSORS_GL518SM is not set 
# CONFIG_SENSORS_IT87 is not set 
CONFI=
G_SENSORS_LM75=3Dm 
# CONFIG_SENSORS_LM77 is not set 
CONFIG_SENSORS_LM=
78=3Dm 
# CONFIG_SENSORS_LM80 is not set 
# CONFIG_SENSORS_LM83 is not =
set 
CONFIG_SENSORS_LM85=3Dm 
# CONFIG_SENSORS_LM90 is not set 
# CONF=
IG_SENSORS_MAX1619 is not set 
# CONFIG_SENSORS_SMSC47M1 is not set 
# =
CONFIG_SENSORS_W83781D is not set 
# CONFIG_SENSORS_W83L785TS is not set=
 
# CONFIG_SENSORS_W83627HF is not set 
 
# 
# Other I2C Chip support=
 
# 
CONFIG_SENSORS_EEPROM=3Dm 
# CONFIG_SENSORS_PCF8574 is not set =0D
=
# CONFIG_SENSORS_PCF8591 is not set 
# CONFIG_SENSORS_RTC8564 is not set=
 
# CONFIG_I2C_DEBUG_CORE is not set 
# CONFIG_I2C_DEBUG_ALGO is not se=
t 
# CONFIG_I2C_DEBUG_BUS is not set 
# CONFIG_I2C_DEBUG_CHIP is not se=
t 
 
# 
# Multimedia devices 
# 
# CONFIG_VIDEO_DEV is not set 
 =0D
=
# 
# Digital Video Broadcasting Devices 
# 
# CONFIG_DVB is not set =0D
=
 
# 
# File systems 
# 
CONFIG_EXT2_FS=3Dy 
# CONFIG_EXT2_FS_XATTR i=
s not set 
CONFIG_EXT3_FS=3Dy 
CONFIG_EXT3_FS_XATTR=3Dy 
# CONFIG_EXT3=
_FS_POSIX_ACL is not set 
# CONFIG_EXT3_FS_SECURITY is not set 
CONFIG_=
JBD=3Dy 
# CONFIG_JBD_DEBUG is not set 
CONFIG_FS_MBCACHE=3Dy 
# CONFI=
G_REISERFS_FS is not set 
# CONFIG_JFS_FS is not set 
# CONFIG_XFS_FS i=
s not set 
# CONFIG_MINIX_FS is not set 
CONFIG_ROMFS_FS=3Dy 
# CONFIG=
_QUOTA is not set 
# CONFIG_AUTOFS_FS is not set 
# CONFIG_AUTOFS4_FS i=
s not set 
 
# 
# CD-ROM/DVD Filesystems 
# 
# CONFIG_ISO9660_FS is =
not set 
# CONFIG_UDF_FS is not set 
 
# 
# DOS/FAT/NT Filesystems =0D
=
# 
CONFIG_FAT_FS=3Dy 
CONFIG_MSDOS_FS=3Dy 
CONFIG_VFAT_FS=3Dy 
CONFIG=
_FAT_DEFAULT_CODEPAGE=3D437 
CONFIG_FAT_DEFAULT_IOCHARSET=3D"iso8859-1" =

# CONFIG_NTFS_FS is not set 
 
# 
# Pseudo filesystems 
# 
CONFIG_=
PROC_FS=3Dy 
CONFIG_SYSFS=3Dy 
# CONFIG_DEVFS_FS is not set 
# CONFIG_=
DEVPTS_FS_XATTR is not set 
# CONFIG_TMPFS is not set 
# CONFIG_HUGETLB=
FS is not set 
# CONFIG_HUGETLB_PAGE is not set 
CONFIG_RAMFS=3Dy 
 =0D
=
# 
# Miscellaneous filesystems 
# 
# CONFIG_ADFS_FS is not set 
# CON=
FIG_AFFS_FS is not set 
# CONFIG_HFS_FS is not set 
# CONFIG_HFSPLUS_FS=
 is not set 
# CONFIG_BEFS_FS is not set 
# CONFIG_BFS_FS is not set =0D
=
# CONFIG_EFS_FS is not set 
CONFIG_JFFS_FS=3Dy 
CONFIG_JFFS_FS_VERBOSE=3D=
0 
# CONFIG_JFFS_PROC_FS is not set 
CONFIG_JFFS2_FS=3Dy 
CONFIG_JFFS2=
_FS_DEBUG=3D0 
# CONFIG_JFFS2_FS_NAND is not set 
# CONFIG_JFFS2_COMPRE=
SSION_OPTIONS is not set 
CONFIG_JFFS2_ZLIB=3Dy 
CONFIG_JFFS2_RTIME=3Dy=
 
# CONFIG_JFFS2_RUBIN is not set 
# CONFIG_CRAMFS is not set 
# CONFI=
G_VXFS_FS is not set 
# CONFIG_HPFS_FS is not set 
# CONFIG_QNX4FS_FS i=
s not set 
# CONFIG_SYSV_FS is not set 
# CONFIG_UFS_FS is not set 
 =0D
=
# 
# Network File Systems 
# 
CONFIG_NFS_FS=3Dy 
# CONFIG_NFS_V3 is n=
ot set 
# CONFIG_NFS_V4 is not set 
# CONFIG_NFS_DIRECTIO is not set =0D
=
# CONFIG_NFSD is not set 
CONFIG_ROOT_NFS=3Dy 
CONFIG_LOCKD=3Dy 
# CON=
FIG_EXPORTFS is not set 
CONFIG_SUNRPC=3Dy 
# CONFIG_RPCSEC_GSS_KRB5 is=
 not set 
# CONFIG_RPCSEC_GSS_SPKM3 is not set 
# CONFIG_SMB_FS is not =
set 
# CONFIG_CIFS is not set 
# CONFIG_NCP_FS is not set 
# CONFIG_CO=
DA_FS is not set 
# CONFIG_AFS_FS is not set 
 
# 
# Partition Types =

# 
CONFIG_PARTITION_ADVANCED=3Dy 
CONFIG_ACORN_PARTITION=3Dy 
CONFIG=
_ACORN_PARTITION_CUMANA=3Dy 
CONFIG_ACORN_PARTITION_EESOX=3Dy 
CONFIG_A=
CORN_PARTITION_ICS=3Dy 
CONFIG_ACORN_PARTITION_ADFS=3Dy 
CONFIG_ACORN_P=
ARTITION_POWERTEC=3Dy 
CONFIG_ACORN_PARTITION_RISCIX=3Dy 
# CONFIG_OSF_=
PARTITION is not set 
# CONFIG_AMIGA_PARTITION is not set 
# CONFIG_ATA=
RI_PARTITION is not set 
# CONFIG_MAC_PARTITION is not set 
CONFIG_MSDO=
S_PARTITION=3Dy 
CONFIG_BSD_DISKLABEL=3Dy 
# CONFIG_MINIX_SUBPARTITION =
is not set 
CONFIG_SOLARIS_X86_PARTITION=3Dy 
# CONFIG_UNIXWARE_DISKLAB=
EL is not set 
# CONFIG_LDM_PARTITION is not set 
# CONFIG_SGI_PARTITIO=
N is not set 
# CONFIG_ULTRIX_PARTITION is not set 
# CONFIG_SUN_PARTIT=
ION is not set 
# CONFIG_EFI_PARTITION is not set 
 
# 
# Native Lang=
uage Support 
# 
CONFIG_NLS=3Dy 
CONFIG_NLS_DEFAULT=3D"iso8859-1" 
# =
CONFIG_NLS_CODEPAGE_437 is not set 
# CONFIG_NLS_CODEPAGE_737 is not set=
 
# CONFIG_NLS_CODEPAGE_775 is not set 
# CONFIG_NLS_CODEPAGE_850 is no=
t set 
# CONFIG_NLS_CODEPAGE_852 is not set 
# CONFIG_NLS_CODEPAGE_855 =
is not set 
# CONFIG_NLS_CODEPAGE_857 is not set 
# CONFIG_NLS_CODEPAGE=
_860 is not set 
# CONFIG_NLS_CODEPAGE_861 is not set 
# CONFIG_NLS_COD=
EPAGE_862 is not set 
# CONFIG_NLS_CODEPAGE_863 is not set 
# CONFIG_NL=
S_CODEPAGE_864 is not set 
# CONFIG_NLS_CODEPAGE_865 is not set 
# CONF=
IG_NLS_CODEPAGE_866 is not set 
# CONFIG_NLS_CODEPAGE_869 is not set =0D
=
# CONFIG_NLS_CODEPAGE_936 is not set 
# CONFIG_NLS_CODEPAGE_950 is not s=
et 
# CONFIG_NLS_CODEPAGE_932 is not set 
# CONFIG_NLS_CODEPAGE_949 is =
not set 
# CONFIG_NLS_CODEPAGE_874 is not set 
# CONFIG_NLS_ISO8859_8 i=
s not set 
# CONFIG_NLS_CODEPAGE_1250 is not set 
# CONFIG_NLS_CODEPAGE=
_1251 is not set 
# CONFIG_NLS_ASCII is not set 
# CONFIG_NLS_ISO8859_1=
 is not set 
# CONFIG_NLS_ISO8859_2 is not set 
# CONFIG_NLS_ISO8859_3 =
is not set 
# CONFIG_NLS_ISO8859_4 is not set 
# CONFIG_NLS_ISO8859_5 i=
s not set 
# CONFIG_NLS_ISO8859_6 is not set 
# CONFIG_NLS_ISO8859_7 is=
 not set 
# CONFIG_NLS_ISO8859_9 is not set 
# CONFIG_NLS_ISO8859_13 is=
 not set 
# CONFIG_NLS_ISO8859_14 is not set 
# CONFIG_NLS_ISO8859_15 i=
s not set 
# CONFIG_NLS_KOI8_R is not set 
# CONFIG_NLS_KOI8_U is not s=
et 
# CONFIG_NLS_UTF8 is not set 
 
# 
# Profiling support 
# 
# CO=
NFIG_PROFILING is not set 
 
# 
# Graphics support 
# 
CONFIG_FB=3Dy=
 
CONFIG_FB_MODE_HELPERS=3Dy 
# CONFIG_FB_VIRTUAL is not set 
 
# =0D
=
# Console display driver support 
# 
# CONFIG_VGA_CONSOLE is not set =0D
=
CONFIG_DUMMY_CONSOLE=3Dy 
# CONFIG_FRAMEBUFFER_CONSOLE is not set 
 =0D
=
# 
# Logo configuration 
# 
# CONFIG_LOGO is not set 
 
# 
# Sound =

# 
# CONFIG_SOUND is not set 
 
# 
# Misc devices 
# 
 
# 
# US=
B support 
# 
 
# 
# USB Gadget Support 
# 
# CONFIG_USB_GADGET is =
not set 
 
# 
# MMC/SD Card support 
# 
# CONFIG_MMC is not set 
 =0D
=
# 
# Kernel hacking 
# 
CONFIG_DEBUG_KERNEL=3Dy 
# CONFIG_MAGIC_SYSRQ=
 is not set 
# CONFIG_DEBUG_SLAB is not set 
# CONFIG_DEBUG_SPINLOCK is=
 not set 
# CONFIG_DEBUG_BUGVERBOSE is not set 
CONFIG_DEBUG_INFO=3Dy =0D
=
CONFIG_FRAME_POINTER=3Dy 
CONFIG_DEBUG_USER=3Dy 
# CONFIG_DEBUG_WAITQ i=
s not set 
# CONFIG_DEBUG_ERRORS is not set 
CONFIG_DEBUG_LL=3Dy 
# CO=
NFIG_DEBUG_ICEDCC is not set 
CONFIG_DEBUG_S3C2410_PORT=3Dy 
CONFIG_DEB=
UG_S3C2410_UART=3D0 
 
# 
# Security options 
# 
# CONFIG_SECURITY i=
s not set 
 
# 
# Cryptographic options 
# 
# CONFIG_CRYPTO is not s=
et 
 
# 
# Library routines 
# 
# CONFIG_CRC_CCITT is not set 
CONF=
IG_CRC32=3Dy 
# CONFIG_LIBCRC32C is not set 
CONFIG_ZLIB_INFLATE=3Dy =0D
=
CONFIG_ZLIB_DEFLATE=3Dy 
 
 
 
And the boot output is: 
 
Linux ver=
sion 2.6.8.1 (root@sofocle) (gcc version 3.3.2) #2 Mon Sep 27 10:56:48 CE=
ST 2004 
CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T) 
CPU: D VIVT=
 write-back cache 
CPU: I cache: 16384 bytes, associativity 64, 32 byte =
lines, 8 sets 
CPU: D cache: 16384 bytes, associativity 64, 32 byte line=
s, 8 sets 
Machine: Simtec-BAST 
Memory policy: ECC disabled, Data cach=
e writeback 
CPU S3C2410 (id 0x32410000) 
machine_initted c001e988,53 =0D
=
S3C2410: core 202.800 MHz, memory 101.400 MHz, peripheral 50.700 MHz 
Bu=
ilt 1 zonelists 
Kernel command line: root=3D/dev/nfs rw nfsroot=3D143.2=
25.229.44:/board ip=3Ddhcp 
console=3DttySAC0 
irq: clearing pending ex=
t status 0003ec00 
irq: clearing subpending status 00000092 
irq: clear=
ing subpending status 00000092 
irq: clearing subpending status 00000092=
 
irq: clearing subpending status 00000092 
PID hash table entries: 512=
 (order: 9, 8192 bytes) 
setup_timer tcon=3D00500000, tcnt ea60, tcfg 00=
000000,00040000 
Console: colour dummy device 80x30 
Dentry cache hash =
table entries: 16384 (order: 4, 65536 bytes) 
Inode-cache hash table ent=
ries: 8192 (order: 3, 32768 bytes) 
Memory: 64MB =3D 64MB total 
Memory=
: 62208KB available (1962K code, 519K data, 100K init) 
Mount-cache hash=
 table entries: 512 (order: 0, 4096 bytes) 
CPU: Testing write buffer co=
herency: ok 
NET: Registered protocol family 16 
S3C2410: Initialising =
architecture 
S3C2410 Clock control, (c) 2004 Simtec Electronics 
S3C24=
10 DMA Driver, (c) 2003-2004 Simtec Electronics 
DMA channel 0 at c48000=
00, irq 33 
DMA channel 1 at c4800040, irq 34 
DMA channel 2 at c480008=
0, irq 35 
DMA channel 3 at c48000c0, irq 36 
NetWinder Floating Point =
Emulator V0.97 (extended precision) 
JFFS version 1.0, (C) 1999, 2000  A=
xis Communications AB 
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. =0D
=
lp: driver loaded but no devices found 
Real Time Clock Driver v1.12 =0D
=
ppdev: user-space parallel port driver 
Serial: 8250/16550 driver $Revis=
ion: 1.90 $ 8 ports, IRQ sharing enabled 
S3C2410X Serial, (c) 2003 Simt=
ec Electronics 
ttySAC0 at MMIO 0x50000000 (irq =3D 70) is a S3C2410 =0D
=
ttySAC1 at MMIO 0x50004000 (irq =3D 73) is a S3C2410 
ttySAC2 at MMIO 0x=
50008000 (irq =3D 76) is a S3C2410 
parport0: PC-style at 0x378 [PCSPP,T=
RISTATE,EPP] 
lp0: using parport0 (polling). 
RAMDISK driver initialize=
d: 16 RAM disks of 4096K size 1024 blocksize 
loop: loaded (max 8 device=
s) 
Using anticipatory io scheduler 
nbd: registered device at major 43=
 
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=3D256) (6 b=
it encapsulation 
enabled). 
CSLIP: code copyright 1989 Regents of the =
University of California. 
SLIP linefill/keepalive option. 
Uniform Mul=
ti-Platform E-IDE driver Revision: 7.00alpha2 
ide: Assuming 50MHz syste=
m bus speed for PIO modes; override with idebus=3Dxx 
mice: PS/2 mouse d=
evice common for all mice 
NET: Registered protocol family 2 
IP: routi=
ng cache hash table of 512 buckets, 4Kbytes 
TCP: Hash tables configured=
 (established 4096 bind 8192) 
NET: Registered protocol family 1 
NET: =
Registered protocol family 17 
IP-Config: No network devices available. =

Looking up port of RPC 100003/2 on 143.225.229.44 
RPC: sendmsg return=
ed error 101 
portmap: RPC call returned error 101 
Root-NFS: Unable to=
 get nfsd port number from server, using default 
Looking up port of RPC=
 100005/1 on 143.225.229.44 
RPC: sendmsg returned error 101 
portmap: =
RPC call returned error 101 
Root-NFS: Unable to get mountd port number =
from server, using default 
RPC: sendmsg returned error 101 
mount: RPC=
 call returned error 101 
Root-NFS: Server returned error -101 while mou=
nting /board 
VFS: Unable to mount root fs via NFS, trying floppy. 
VFS=
: Cannot open root device "nfs" or unknown-block(2,0) 
Please append a c=
orrect "root=3D" boot option 
Kernel panic - not syncing: VFS: Unable to=
 mount root fs on unknown-block(2,0) 
 
Thanks. 




-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
_______________________________________________
NFS maillist  -  NFS@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nfs

kernel panic

[lp4u]

Hi,

I've a s3c2410 board (BAST architecture), I've compilated a kernel 2.6.8.1 with patch 2.6.9-rc2 e
patch 2.6.9-rc2-bk12. But the board don't start with NFS (with kernel 2.4.26, yes). My
configuration is: 

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.8.1
# Mon Sep 27 10:41:24 2004
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y 
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y 
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set 
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y 
CONFIG_IOSCHED_CFQ=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support 
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
 
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE_PB is not set
# CONFIG_ARCH_IMX is not set

#
# S3C24XX Implementations
#
CONFIG_ARCH_BAST=y
# CONFIG_ARCH_H1940 is not set
# CONFIG_ARCH_SMDK2410 is not set
# CONFIG_MACH_VR1000 is not set
CONFIG_CPU_S3C2410=y

#
# S3C2410 Setup
#
CONFIG_S3C2410_DMA=y 
# CONFIG_S3C2410_DMA_DEBUG is not set

#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_COPY_V4WB=y 
CONFIG_CPU_TLB_V4WBI=y

#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set 

#
# General setup
#
# CONFIG_ZBOOT_ROM is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0

#
# At least one math emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_PM is not set
# CONFIG_PREEMPT is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="root=/dev/nfs rw nfsroot=143.225.229.44:/board ip=dhcp init/bin/bash
console=ttySAC0"
CONFIG_ALIGNMENT_TRAP=y

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_ARC is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_PARTITIONS is not set
# CONFIG_MTD_CONCAT is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
 
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set 
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_EDB7312 is not set

#
# Self-contained MTD device drivers
# 
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set

#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set

#
# Plug and Play support
#

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y 

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y

#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing 
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set 

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set 
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y

#
# Ethernet (1000 Mbit)
#

#
# Ethernet (10000 Mbit)
#

#
# Token Ring devices
#

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set 
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
 
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y 
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_SCSI is not set

#
# Fusion MPT device support 
#

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y 
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_DIGI is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set

# 
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y 
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_S3C2410=y
CONFIG_SERIAL_S3C2410_CONSOLE=y
# CONFIG_SERIAL_BAST_SIO is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=y
# CONFIG_TIPAR is not set 

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
 
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set 
# CONFIG_RAW_DRIVER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_PCA_ISA is not set

# 
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set 
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
 
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set 

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems 
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" 
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
 
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set 
# CONFIG_EFS_FS is not set
CONFIG_JFFS_FS=y
CONFIG_JFFS_FS_VERBOSE=0
# CONFIG_JFFS_PROC_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
 
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set 
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types 
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set 
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_VIRTUAL is not set

# 
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set 
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
 
#
# Logo configuration
#
# CONFIG_LOGO is not set

#
# Sound 
#
# CONFIG_SOUND is not set

#
# Misc devices
#

#
# USB support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set
 
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y 
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
CONFIG_DEBUG_S3C2410_PORT=y
CONFIG_DEBUG_S3C2410_UART=0

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y 
CONFIG_ZLIB_DEFLATE=y



And the boot output is:

Linux version 2.6.8.1 (root@sofocle) (gcc version 3.3.2) #2 Mon Sep 27 10:56:48 CEST 2004
CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)
CPU: D VIVT write-back cache
CPU: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Machine: Simtec-BAST
Memory policy: ECC disabled, Data cache writeback
CPU S3C2410 (id 0x32410000)
machine_initted c001e988,53 
S3C2410: core 202.800 MHz, memory 101.400 MHz, peripheral 50.700 MHz
Built 1 zonelists
Kernel command line: root=/dev/nfs rw nfsroot=143.225.229.44:/board ip=dhcp
console=ttySAC0
irq: clearing pending ext status 0003ec00
irq: clearing subpending status 00000092
irq: clearing subpending status 00000092
irq: clearing subpending status 00000092
irq: clearing subpending status 00000092
PID hash table entries: 512 (order: 9, 8192 bytes)
setup_timer tcon=00500000, tcnt ea60, tcfg 00000000,00040000
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62208KB available (1962K code, 519K data, 100K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
S3C2410: Initialising architecture
S3C2410 Clock control, (c) 2004 Simtec Electronics
S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics
DMA channel 0 at c4800000, irq 33
DMA channel 1 at c4800040, irq 34
DMA channel 2 at c4800080, irq 35
DMA channel 3 at c48000c0, irq 36
NetWinder Floating Point Emulator V0.97 (extended precision)
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. 
lp: driver loaded but no devices found
Real Time Clock Driver v1.12 
ppdev: user-space parallel port driver
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
S3C2410X Serial, (c) 2003 Simtec Electronics
ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2410 
ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2410
ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2410
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Using anticipatory io scheduler
nbd: registered device at major 43
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation
enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
IP-Config: No network devices available. 
Looking up port of RPC 100003/2 on 143.225.229.44
RPC: sendmsg returned error 101
portmap: RPC call returned error 101
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 143.225.229.44
RPC: sendmsg returned error 101
portmap: RPC call returned error 101
Root-NFS: Unable to get mountd port number from server, using default
RPC: sendmsg returned error 101
mount: RPC call returned error 101
Root-NFS: Server returned error -101 while mounting /board
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or unknown-block(2,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)

Thanks.

Re: Kernel Panic

[Keir Fraser]

xda device no longer exists, so change xda5 -> hda5.

 -- Keir

> Hi,
> 
> I'm trying to setup a xen environment.
> I download xen-2.0-src.tgz, follow the steps from the Xen user's manual,
> and got a new kernel that i put in my machine.
> 
> I have made a reboot and every thing goes well.
> 
> Then i have try to configure a new domain like this
> in /etc/xen/xmdefconfig
> 
> kernel = "/boot/vmlinuz-2.6.8.1-xenU"
> disk = [ 'phy:hda5,xda5,r' ]
> root = "/dev/xda5 ro"
> 
> then i run "xm create -c vmid=1" and i'm getting this kernel panic
> 
> VFS: Cannot open root device "xda5" or unknown-block(2,0)
> Please append a correct "root=" boot option
> Kernel panic: VFS: Unable to mount root fs on unknown-block(2,0)
> 
> Someone can point me what i'm doing wrong ?
> I'm using Scientific Linux CERN release 3.0.2 (SL), this distribution is
> based on Redhat Enterprise 3. 
>   
> Thank's
> 
> ND
> -- 
> Nuno Dias <ndias@lip.pt>
> LIP
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
> Project Admins to receive an Apple iPod Mini FREE for your judgement on
> who ports your project to Linux PPC the best. Sponsored by IBM.
> Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xen-devel



-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php

Kernel Panic

[Nuno Dias]

Hi,

I'm trying to setup a xen environment.
I download xen-2.0-src.tgz, follow the steps from the Xen user's manual,
and got a new kernel that i put in my machine.

I have made a reboot and every thing goes well.

Then i have try to configure a new domain like this
in /etc/xen/xmdefconfig

kernel = "/boot/vmlinuz-2.6.8.1-xenU"
disk = [ 'phy:hda5,xda5,r' ]
root = "/dev/xda5 ro"

then i run "xm create -c vmid=1" and i'm getting this kernel panic

VFS: Cannot open root device "xda5" or unknown-block(2,0)
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on unknown-block(2,0)

Someone can point me what i'm doing wrong ?
I'm using Scientific Linux CERN release 3.0.2 (SL), this distribution is
based on Redhat Enterprise 3. 
  
Thank's

ND
-- 
Nuno Dias <ndias@lip.pt>
LIP



-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php

Re: kernel panic

[Zwane Mwaikambo]

On Mon, 12 Apr 2004, osmaker@hu wrote:

> Hello everyone,
> I have got a kernel panic when running a heavy load socket processing.
> This server is written by my self and when the clients reached 10k,
> the panic occured. In the server code run 100 threads and every thread
> using poll on fds.
>       I am a newbie on kernel ,can you tell me how to solve the
>       problem?and how to analyze the panic when I come across it?

I recommend you upgrade your Redhat kernel (the one you're running is
pretty old) and if the problem still persists, file a bugreport at
http://bugzilla.redhat.com

	Zwane

kernel panic

[osmaker@hu]

Hello everyone,
I have got a kernel panic when running a heavy load socket processing.
This server is written by my self and when the clients reached 10k,
the panic occured. In the server code run 100 threads and every thread
using poll on fds.
      I am a newbie on kernel ,can you tell me how to solve the
      problem?and how to analyze the panic when I come across it?

      the panic information:
ybdev mousedev hid input usb-uhci usbcore ext3jbd
CPU:0
EIP:0060:[<d08ab88e>]   not tainted
EFLAGS:00010202
EIP is at rx_poll [sundance] 0x17e(2.4.20-8)
eax:00008000 ebx:00000000 ecx:ce611160 edx:00000014
esi:00008052 edi:00000000 ebp:00000052 esp:cffb7f80
ds:0068  es:0068  ss:0068
Process ksoftirqd_cpu0(pid:4, stackpage=cffb7000)
Stack:c06c8080 ce611000 c01f5eed 00000001 d08a6e00 0000000b 00000014 ce611160
      0000000b c0370c18 fffffff7 00000246 c01217d6 ce611000 00000001 c0121685
      c0370c18 cffb6000 cffb6000 cffb6000 00000000 c0121ab5 cffb62fe c025d9b1
Call Trace:[<c01f5eed>]process_blacklog[kernel]0x6d(0xcffb7f88))
           [<c01217d6>]tasklet_action[kernel]0x46(0xcffb7fb0))
           [<c0121685>]do_softirq[kernel]0x95(0xcffb7fbc))
           [<c0121ab5>]ksoftirqd[kernel]0xa5(0xcffb7fd4))
           [<c0121a10>]ksoftirqd[kernel]0x0(0xcffb7fe4))
           [<c010742d>]kernel_thread_helper[kerlnel]0x5(0xcffb7ff0)
Code:8b 7b 60 8b 83 84 00 00 00 85 ff 0f 85 fe 01 00 01 6b 5c
<0> Kernel panic:Aiee, killing interrupt handler!
In interrupt handler - not syncing      

        Thank you very much!

-- 
Best regards,
 osmaker                          mailto:osmaker@mailbox.hu

kernel panic

[osmaker@hu]

Hello everyone,
I have got a kernel panic when running a heavy load socket processing.
This server is written by my self and when the clients reached 10k,
the panic occured. In the server code run 100 threads and every thread
using poll on fds.
      I am a newbie on kernel ,can you tell me how to solve the
      problem?and how to analyze the panic when I come across it?

      the panic information:
ybdev mousedev hid input usb-uhci usbcore ext3jbd
CPU:0
EIP:0060:[<d08ab88e>]   not tainted
EFLAGS:00010202
EIP is at rx_poll [sundance] 0x17e(2.4.20-8)
eax:00008000 ebx:00000000 ecx:ce611160 edx:00000014
esi:00008052 edi:00000000 ebp:00000052 esp:cffb7f80
ds:0068  es:0068  ss:0068
Process ksoftirqd_cpu0(pid:4, stackpage=cffb7000)
Stack:c06c8080 ce611000 c01f5eed 00000001 d08a6e00 0000000b 00000014 ce611160
      0000000b c0370c18 fffffff7 00000246 c01217d6 ce611000 00000001 c0121685
      c0370c18 cffb6000 cffb6000 cffb6000 00000000 c0121ab5 cffb62fe c025d9b1
Call Trace:[<c01f5eed>]process_blacklog[kernel]0x6d(0xcffb7f88))
           [<c01217d6>]tasklet_action[kernel]0x46(0xcffb7fb0))
           [<c0121685>]do_softirq[kernel]0x95(0xcffb7fbc))
           [<c0121ab5>]ksoftirqd[kernel]0xa5(0xcffb7fd4))
           [<c0121a10>]ksoftirqd[kernel]0x0(0xcffb7fe4))
           [<c010742d>]kernel_thread_helper[kerlnel]0x5(0xcffb7ff0)
Code:8b 7b 60 8b 83 84 00 00 00 85 ff 0f 85 fe 01 00 01 6b 5c
<0> Kernel panic:Aiee, killing interrupt handler!
In interrupt handler - not syncing      

        Thank you very much!

-- 
Best regards,
 osmaker                          mailto:osmaker@mailbox.hu

Re: Kernel Panic

[Krishna Kumar]

[-- Attachment #1.1: Type: text/plain, Size: 3510 bytes --]





You need to specify the kernel version you are running, plus all other
variables which causes this panic.
A objdump of panicing code (dev_queue_xmit ? not necessarily, what about
eip and register/stack, etc
that have scrolled out of the screen) will be useful. Use serial console
(documentation is present in
serial-console.txt) to get full dump information.

- KK



|---------+---------------------------->
|         |           Niranjan         |
|         |           <niranjan_cs2905@|
|         |           yahoo.com>       |
|         |           Sent by:         |
|         |           netdev-bounce@oss|
|         |           .sgi.com         |
|         |                            |
|         |                            |
|         |           02/10/2004 04:32 |
|         |           PM               |
|         |                            |
|---------+---------------------------->
  >-----------------------------------------------------------------------------------------------------------------|
  |                                                                                                                 |
  |       To:       netdev@oss.sgi.com                                                                              |
  |       cc:                                                                                                       |
  |       Subject:  Kernel Panic                                                                                    |
  |                                                                                                                 |
  >-----------------------------------------------------------------------------------------------------------------|




Hi,
I am trying to add cryptoapi support in wireless LAN driver (linux-wlan-ng
for Prism based card) for my security project.
While doing so, I am getting a kernel panic. I am not able to debug it as
there is no logging of any information related to kernel panic in the log
files (/var/log/messages or /var/log/dmesg) when I reboot the system. I
have attached the log below available on the screen.
Can anyone please help me in what can be possible error by looking at the
log ?
I will greatly appreciate any help in this matter.

Regards,
-Niranjan
Research Assistant, UMASS.

Log available on the screen:

......
......
[<c01f5850>]  dev_queue_xmit           [kernel]            0x210
(0xc034de04))
[<c01f98ec>]   neigh_resolve_output    [kernel]            0xec
(0xc034de1c))
                        neigh_update
                        neigh_lookup
                        arp_process
                        netif_receive_skb
                        process_backlog
                        net_rx_action
                        do_softirq
                        do_IRQ
                        call_do_IRQ
                        dump_fpu
                        apm_bios_call_simple
                        apm_do_idle
                        apm_cpu_idle
                        apm_cpu_idle
                        default_idle
                       cpu_idle
[<c01015000> stext                             [kernel]            0x0
(0xc034dfe0))

Code:   0f 0b e2 3f d7 25 c0 e9 77 fd ff ff 8d b4 26 00 00 00 00
 <0>Kernel Panic: Aiee, killing interrupt handler!
In interrupt handler – not syncing


Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online





[-- Attachment #1.2: Type: text/html, Size: 3666 bytes --]

[-- Attachment #2: pic03043.gif --]
[-- Type: image/gif, Size: 1255 bytes --]

Kernel Panic

[Niranjan]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=us-ascii, Size: 1767 bytes --]

Hi,
I am trying to add cryptoapi support in wireless LAN driver (linux-wlan-ng for Prism based card) for my security project.  
While doing so, I am getting a kernel panic. I am not able to debug it as there is no logging of any information related to kernel panic in the log files (/var/log/messages or /var/log/dmesg) when I reboot the system. I have attached the log below available on the screen.
Can anyone please help me in what can be possible error by looking at the log ?
I will greatly appreciate any help in this matter.

Regards,
-Niranjan
Research Assistant, UMASS.

Log available on the screen:

......
......
[<c01f5850>]  dev_queue_xmit           [kernel]            0x210  (0xc034de04))
[<c01f98ec>]   neigh_resolve_output    [kernel]            0xec     (0xc034de1c))
                        neigh_update
                        neigh_lookup
                        arp_process
                        netif_receive_skb
                        process_backlog
                        net_rx_action
                        do_softirq
                        do_IRQ
                        call_do_IRQ
                        dump_fpu
                        apm_bios_call_simple
                        apm_do_idle
                        apm_cpu_idle
                        apm_cpu_idle
                        default_idle
                       cpu_idle
[<c01015000> stext                             [kernel]            0x0      (0xc034dfe0))
 
Code:   0f 0b e2 3f d7 25 c0 e9 77 fd ff ff 8d b4 26 00 00 00 00
 <0>Kernel Panic: Aiee, killing interrupt handler!
In interrupt handler – not syncing




---------------------------------
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online

[-- Attachment #2: Type: text/html, Size: 4293 bytes --]

Re: Kernel panic...

[William Lee Irwin III]

On Fri, Dec 05, 2003 at 01:34:35AM -0800, neel vanan wrote:
>>  Mounting root filesystem
>>  mount : erro 6 mounting ext3
>>  pivotroot : pivot_root (/sysroot, /sysroot/initrd)
>> failed:2
>>  umount /initrd/proc failed :2
>>  Mounting devfs on /dev
>>  freeing unused kernel memory : 464k freed
>>  Kernel panic: no init found. Try passing init= option
>> to kernel
>> After then blinking cursor.

On Fri, Dec 05, 2003 at 06:19:28AM -0800, William Lee Irwin III wrote:
> Could you post your .config?

Okay, the first thing to try is removing devfs from the equation if
possible. Your mount is getting back -ENXIO, suggesting whatever device
you're trying to mount doesn't exist according to the kernel. devfs
does device management internally to the kernel, so it's a likely culprit.

It would also be helpful to find the command-line arguments issued to
mount(8) when it's failing, as well as more information about the
contents of your initrd. Can you boot without an initrd?


-- wli

Re: Kernel panic...

[William Lee Irwin III]

On Fri, Dec 05, 2003 at 01:34:35AM -0800, neel vanan wrote:
>  Mounting root filesystem
>  mount : erro 6 mounting ext3
>  pivotroot : pivot_root (/sysroot, /sysroot/initrd)
> failed:2
>  umount /initrd/proc failed :2
>  Mounting devfs on /dev
>  freeing unused kernel memory : 464k freed
>  Kernel panic: no init found. Try passing init= option
> to kernel
> After then blinking cursor.

Could you post your .config?


-- wli

Kernel panic...

[neel vanan]

Hi,
currently i am compiling kernel 2.6.0-test11, After
making kernel image and installing new module when i
boot with new kernel image i am getting this error:

 Red Hat nash version 3.4.42 starting
 Loading sd_mod.ko module
 Loading aic79xx.ko module
 scsi0: Adaptec AIC79xx PCI-X SCSI HBA DRIVER, Rev
1.3.9
        .....................................
 scsi0:A:0:0: Tagged Queing enabled, Depth 32
 scsi device sda: drive cache: write back
 /dev/scsi/host0/bus0/target0/lun0: unknown partition
table
 Attached scsi disk sda at scsi0, channel0, id0, lun0
 mounting /proc file system
 creating block devices
 creating Root devices
 Mounting root filesystem
 mount : erro 6 mounting ext3
 pivotroot : pivot_root (/sysroot, /sysroot/initrd)
failed:2
 umount /initrd/proc failed :2
 Mounting devfs on /dev
 freeing unused kernel memory : 464k freed
 Kernel panic: no init found. Try passing init= option
to kernel
After then blinking cursor.

#Entries in grub.conf is:
 title Red Hat Linux (2.6.0)
 root (hd0,0)
 kernel /vmlinux2.6.0 ro root=/dev/sda3
 initrd /initrd-2.6.0.img
 #
also i had tried append="hdc=ide-scsi root=LABEL=/"
and append="hdc=ide-scsi root=/dev/sda3"

 <content of /etc/fstab>
 LABEL=/      /          ext3    defaults        1 1
 LABEL=/boot  /boot      ext3    defaults        1 2
 none         /dev/pts   devpts  gid=5,mode=620  0 0
 none         /proc      proc    defaults        0 0
 none         /dev/shm   tmpfs   defaults        0 0
 /dev/sda2    swap       swap    defaults        0 0
 /dev/cdrom   /mnt/cdrom udf,iso9660
noauto,owner,kudzu,ro 0 0
 /dev/fd0     /mnt/floppy auto  noauto,owner,kudzu 0 0

Please let me know where i am wrong.

Thanks.

Neel


__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/

Re: kernel panic

[Fname Lname]

--- Gábor Lénárt <lgb@lgb.hu> wrote:
> On Thu, Jul 24, 2003 at 05:47:45AM +0100, mount me
> wrote:
> > Hi all,
> > what does "kernel panic" actually mean ?
> 
> In general it indicates a major problem which should
> not occured 
[*snip*]
> A good example is the example where the root
> filesystem cannot be mounted.
> Since booting the OS _REQUIRES_ to mount the
> filesystem it's perfectly clear
> that kernel can't continue the boot procedure (since
> eg running init should
> be done from filesystem) so it stops there and
> indicates the problem with a
> message like kernel panic.
[*snip*]

Ahem...

Evedently, you are not running on a MicroSoft 
platform ...


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

Re: kernel panic

[Gábor Lénárt]

On Thu, Jul 24, 2003 at 05:47:45AM +0100, mount me wrote:
> Hi all,
> what does "kernel panic" actually mean ?

In general it indicates a major problem which should not occured and because
kernel does not know what it should do in case of this problem, or even
the problem should not be occured, it reports kernel panic.

A good example is the example where the root filesystem cannot be mounted.
Since booting the OS _REQUIRES_ to mount the filesystem it's perfectly clear
that kernel can't continue the boot procedure (since eg running init should
be done from filesystem) so it stops there and indicates the problem with a
message like kernel panic.

This message itself is not too meaningful, you should see another message
as well describes the problem caused the kernel panic.

- Gábor (larta'H)
-
To unsubscribe from this list: send the line "unsubscribe linux-8086" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

kernel panic

[mount me]

Hi all,
what does "kernel panic" actually mean ?

karthik bala guru
sdcckarthik@yahoo.com
linladn@yahoo.co.in

________________________________________________________________________
Send free SMS using the Yahoo! Messenger. Go to http://in.mobile.yahoo.com/new/pc/

Kernel panic

[Allshouse, Brian M (Sabre)]

I'm having problems with kernel panics. I set up my firewall with the
latest and greatest version of iptables and the latest stable kernel. I'm
running slackware 8.1, and ever since I put it on the network for testing I
get kernel panics that crash the machine I tried the previous kernel
version (2.4.18) and also tried the latest patches for Iptables. I posted 
this problem here a few weeks ago and someone suggested using ksymoops to 
track down what is causing the kernel panic. I finally have been able to do
that, but not being a kernel programmer I don't know what to make of it. I'm
pasting the output from ksymoops below. If anyone knows what to make of this
or where I can find out what this means I would greatly appreciate it. I'm
on 
the verge of missing my deadline to have this box in place. Thanks.

<-------------------------Start ksymoops
output----------------------------------------->

ksymoops 2.4.9 on i586 2.4.20.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.4.20/ (default)
     -m /usr/src/linux/System.map (default)

Warning: You did not tell me where to find symbol information.  I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc.  ksymoops -h explains the options.

*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c0272a86>]   Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax:  00000080  ebx:  00000000  ecx:  7354e5cc  edx:  000007ff
esi:  0000008c  edi:  ffffffea  ebp:  c0351e5c  esp:  c0351e0c
ds:  0018  es:  0018 ss:  0018
Process swapper (pid: 0, stackpage=c0351000)
Stack: 00000000 00000002 5750e58c 00000000 00000000 000004e8 00000000
00000000
       cb8fb990 cb8fb990 00000000 7d56e58c 00000000 fd010015 cb919920
5750e58c
       7354e48c 00000002 00000000 00000000 7354e58c c0272fbc cbe1cee0
5750e58c
Call Trace:   [<c0272fbc>] [<c0290c4b>] [<c026cf4a>] [<c0290f8f>]
[<c029aa8f>]
 [<c026745b>] [<c02674ee>] [<c0267604>] [<c0119c5a>] [<c0109aae>]
[<c0106d00>]
 [<c010bf38>] [<c0106d00>] [<c0106d23>] [<c0106d87>] [<c0105000>]
[<c0105027>]
Code: 03 00 83 f8 7f 0f 84 f0 03 00 00 8d 7d ec 8d 5d e4 a1 bc


>>EIP; c0272a86 <ip_route_input_slow+12e/558>   <=====

>>ebp; c0351e5c <init_task_union+1e5c/2000>
>>esp; c0351e0c <init_task_union+1e0c/2000>

Trace; c0272fbc <ip_route_input+10c/114>
Trace; c0290c4b <arp_process+1a3/44c>
Trace; c026cf4a <nf_hook_slow+132/188>
Trace; c0290f8f <arp_rcv+9b/c4>
Trace; c029aa8f <unix_dgram_sendmsg+35f/364>
Trace; c026745b <netif_receive_skb+14f/178>
Trace; c02674ee <process_backlog+6a/110>
Trace; c0267604 <net_rx_action+70/114>
Trace; c0119c5a <do_softirq+5a/a4>
Trace; c0109aae <do_IRQ+96/a8>
Trace; c0106d00 <default_idle+0/28>
Trace; c010bf38 <call_do_IRQ+5/d>
Trace; c0106d00 <default_idle+0/28>
Trace; c0106d23 <default_idle+23/28>
Trace; c0106d87 <cpu_idle+3f/54>
Trace; c0105000 <_stext+0/0>
Trace; c0105027 <rest_init+27/28>

Code;  c0272a86 <ip_route_input_slow+12e/558>
00000000 <_EIP>:
Code;  c0272a86 <ip_route_input_slow+12e/558>   <=====
   0:   03 00                     add    (%eax),%eax   <=====
Code;  c0272a88 <ip_route_input_slow+130/558>
   2:   83 f8 7f                  cmp    $0x7f,%eax
Code;  c0272a8b <ip_route_input_slow+133/558>
   5:   0f 84 f0 03 00 00         je     3fb <_EIP+0x3fb> c0272e81
<ip_route_input_slow+529/558>
Code;  c0272a91 <ip_route_input_slow+139/558>
   b:   8d 7d ec                  lea    0xffffffec(%ebp),%edi
Code;  c0272a94 <ip_route_input_slow+13c/558>
   e:   8d 5d e4                  lea    0xffffffe4(%ebp),%ebx
Code;  c0272a97 <ip_route_input_slow+13f/558>
  11:   a1 bc 00 00 00            mov    0xbc,%eax

 <0>Kernel panic: Aiee, killing interrupt handler!

1 warning issued.  Results may not be reliable.

<----------------------------------End ksymoops
output------------------------------------------->



Sincerely,

Brian Allshouse
UNIX Systems Administrator
Sabre Systems Inc.
mailto:allshousebm@navair.navy.mil
(301) 342-7034

Re: Kernel Panic

[Jamie Harris]

> I am not sure about the hardware, it's not easy to check, but I belive
>  my /dev/hda is a 40Gb someting purchaced a year back.  On IDE.
> Either a
>  Seagate, a Fujisu or a Western Digital.   (Can't get cover off as
> rack-mounted and rack screwed into removable cover :)

I only asked to check that it wasn't on a RAID of somesort, as otherwise
it isn't going to be hardware failure!

> I hope you can help me, as the implications of an old kernel or an old
>  disk have radically different fix's :)

As these problems have only just developed I'd be surprised if it was
the Kernel.  My guess would be the disk is on its ways out.  Is anything
mentioned in your logs about the disk in question?  Also, out of
curiosity how come you've only got ext3 on a couple of file systems and
not all of them?

Exactly which kernel are you running?

cheers

Jamie...

Re: Kernel Panic

[Ben Clewett]

The filesystem are ext2 and ex3:

Filesystem    Type   1M-blocks      Used Available Use% Mounted on
/dev/hda3     ext3       37038      1860     33296   6% /
/dev/hdc1     ext3        1969       119      1750   7% /apache
/dev/hda1     ext2          30         6        23  19% /boot
/dev/hdc3     ext2       37560       279     35373   1% /var/spool/mail
/dev/hdc4     ext2       35087        76     33229   1% /home


The kernel panic mensions journal.o so I guess this must be an ext3 
partision?  Probably on the '/' as no files in the 'apache' are ever 
effected.

I am not sure about the hardware, it's not easy to check, but I belive 
my /dev/hda is a 40Gb someting purchaced a year back.  On IDE.  Either a 
Seagate, a Fujisu or a Western Digital.   (Can't get cover off as 
rack-mounted and rack screwed into removable cover :)

I hope you can help me, as the implications of an old kernel or an old 
disk have radically different fix's :)

Ben

Jamie Harris wrote:
> Sounds to me like you have bad sectors on your harddisk that the
> journalling file system is trying to work around.  What file system are
> you using and what hardware?
> 
> cheers
> 
> Jamie...
> 
> 
>>Dear Linux Admin,
>>
>>On Linux 2.4 I have had three Kernel Panics recently.
>>
>>They include the following: journal.o "( ret != 0 )".  I see in the
>>source code that there is an assertion: J_ASSERT(ret != 0) in the
>>function:
>>
>>unsigned long journal_bmap(journal_t *journal, unsigned long blocknr)
>>
>>Which looks like a possible place for the origin of this.
>>
>>There is also a large amount of Hex data, which I do not have, unless
>>logged somewhere on my system unknown to me.  (I don't get many Panics,
>>not sure where panic data is logged...)
>>
>>On reboot I loose files.  Although nothing serious yet.
>>
>>The system is a POP3 server, handling about 1,000 email files and about
>>10,000 email's a day, so there is constantly great disk load by sendmail
>> and the default redhat POP3.
>>
>>Should I upgrade my kernel, or may I be doing something specific to
>>cause this?
>>
>>Thanks with any help,
>>
>>Ben Clewett.
>>
>>-
>>To unsubscribe from this list: send the line "unsubscribe linux-admin"
>>in the body of a message to majordomo@vger.kernel.org
>>More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> 

Re: Kernel Panic

[Jamie Harris]

Sounds to me like you have bad sectors on your harddisk that the
journalling file system is trying to work around.  What file system are
you using and what hardware?

cheers

Jamie...

> Dear Linux Admin,
>
> On Linux 2.4 I have had three Kernel Panics recently.
>
> They include the following: journal.o "( ret != 0 )".  I see in the
> source code that there is an assertion: J_ASSERT(ret != 0) in the
> function:
>
> unsigned long journal_bmap(journal_t *journal, unsigned long blocknr)
>
> Which looks like a possible place for the origin of this.
>
> There is also a large amount of Hex data, which I do not have, unless
> logged somewhere on my system unknown to me.  (I don't get many Panics,
> not sure where panic data is logged...)
>
> On reboot I loose files.  Although nothing serious yet.
>
> The system is a POP3 server, handling about 1,000 email files and about
> 10,000 email's a day, so there is constantly great disk load by sendmail
>  and the default redhat POP3.
>
> Should I upgrade my kernel, or may I be doing something specific to
> cause this?
>
> Thanks with any help,
>
> Ben Clewett.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-admin"
> in the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


-- 
**  This message was transmitted on 100% recycled electrons **

Kernel Panic

[Ben Clewett]

Dear Linux Admin,

On Linux 2.4 I have had three Kernel Panics recently.

They include the following: journal.o "( ret != 0 )".  I see in the 
source code that there is an assertion: J_ASSERT(ret != 0) in the function:

unsigned long journal_bmap(journal_t *journal, unsigned long blocknr)

Which looks like a possible place for the origin of this.

There is also a large amount of Hex data, which I do not have, unless 
logged somewhere on my system unknown to me.  (I don't get many Panics, 
not sure where panic data is logged...)

On reboot I loose files.  Although nothing serious yet.

The system is a POP3 server, handling about 1,000 email files and about 
10,000 email's a day, so there is constantly great disk load by sendmail 
and the default redhat POP3.

Should I upgrade my kernel, or may I be doing something specific to 
cause this?

Thanks with any help,

Ben Clewett.

Kernel Panic

[David van Hoose]

[-- Attachment #1: Type: text/plain, Size: 864 bytes --]

I booted my system with 2.5.66-bk1 and switched every 3 minutes between 
init 5 and init 3. This resulted in several faults from anything that 
was run at the time. Attached is the latest dmesg with the faults from 
uname and X at the end. Also attached is a panic that has an unknown 
process. It looked like a buffer overrun.  The ? characters are 
replacements for the high-ascii characters that I couldn't type.
I hope this can be fixed. I can reproduce the locking and crashing, but 
each time it is something different that dies. Sometimes I get a kernel 
panic, but it reboots itself before I can write anything down.

This problem started after I began using 2.5.66. I first noticed it when 
I would exit KDE before reboots. Things would lock up. Turned NMI 
watchdog on as I was instructed.


Regards,
David

PS. I have also included my config for 2.5.66

[-- Attachment #2: config-2.5.66-bk1 --]
[-- Type: text/plain, Size: 10599 bytes --]

CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_EXPERIMENTAL=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
CONFIG_X86_PC=y
CONFIG_MPENTIUM4=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_PREFETCH=y
CONFIG_X86_SSE2=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=m
CONFIG_HIGHMEM4G=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_MTRR=y
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_ACPI_HT_ONLY=y
CONFIG_ACPI_BOOT=y
CONFIG_APM=y
CONFIG_APM_CPU_IDLE=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
CONFIG_PNPBIOS=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_PCI_WIP=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_PDC202XX_FORCE=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=m
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_NETFILTER=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_XFRM_USER=y
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IRC=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IPV6_SCTP__=y
CONFIG_VLAN_8021Q=m
CONFIG_LLC=y
CONFIG_LLC_UI=y
CONFIG_IPX=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_BRIDGE=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_NET_ETHERNET=y
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
CONFIG_NET_PCI=y
CONFIG_SIS900=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_GAMEPORT=y
CONFIG_SOUND_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=2048
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_BUSMOUSE=y
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_AGP=m
CONFIG_AGP3=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_VIA=m
CONFIG_AGP_AMD=m
CONFIG_AGP_SIS=m
CONFIG_AGP_ALI=m
CONFIG_AGP_AMD_8151=m
CONFIG_AGP_I7505=m
CONFIG_RAW_DRIVER=m
CONFIG_HANGCHECK_TIMER=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_HFS_FS=m
CONFIG_HPFS_FS=y
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_USB_AUDIO=m
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_XPAD=m
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m
CONFIG_USB_DABUSB=m
CONFIG_USB_CATC=m
CONFIG_USB_CDCETHER=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
CONFIG_USB_EMI26=m
CONFIG_USB_TIGL=y
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_BRLVGER=m
CONFIG_USB_LCD=m
CONFIG_PROFILING=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_KALLSYMS=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=y
CONFIG_X86_BIOS_REBOOT=y

[-- Attachment #3: dmesg-2.5.66-bk1 --]
[-- Type: text/plain, Size: 15295 bytes --]

].
Initializing Cryptographic API
pty: 2048 Unix98 ptys configured
request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
lp: driver loaded but no devices found
Real Time Clock Driver v1.11
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (interrupt-driven).
lp0: console ready
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
sis900.c: v1.08.06 9/24/2002
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 9, 00:e0:18:9d:4f:d0.
Linux Tulip driver version 1.1.13 (May 11, 2002)
eth1: ADMtek Comet rev 17 at 0x9400, 00:20:78:04:68:6F, IRQ 9.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS648    ATA 133 controller
    ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6Y080P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=158816/16/63, UDMA(133)
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
end_request: I/O error, dev hdc, sector 0
hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
end_request: I/O error, dev hdc, sector 0
ide-floppy driver 0.99.newide
ppa: Version 2.07 (for Linux 2.4.x)
ppa: Found device at ID 6, Attempting to use EPP 32 bit
ppa: Communication established with ID 6 using EPP 32 bit
scsi0 : Iomega VPI0 (ppa) interface
  Vendor: IOMEGA    Model: ZIP 100           Rev: D.09
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 6, lun 0
ehci-hcd 00:03.3: Silicon Integrated S SiS7002 USB 2.0
ehci-hcd 00:03.3: irq 9, pci mem e0811000
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
ehci-hcd 00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 00:03.3
ehci-hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub 1-0:0: USB hub found
hub 1-0:0: 6 ports detected
ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci-hcd: block sizes: ed 64 td 64
ohci-hcd 00:03.0: Silicon Integrated S 7001
ohci-hcd 00:03.0: irq 9, pci mem e0813000
ohci-hcd 00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:0: USB hub found
hub 2-0:0: 2 ports detected
ohci-hcd 00:03.1: Silicon Integrated S 7001 (#2)
ohci-hcd 00:03.1: irq 9, pci mem e0815000
ohci-hcd 00:03.1: new USB bus registered, assigned bus number 3
hub 3-0:0: USB hub found
hub 3-0:0: 2 ports detected
ohci-hcd 00:03.2: Silicon Integrated S 7001 (#3)
ohci-hcd 00:03.2: irq 9, pci mem e0817000
ohci-hcd 00:03.2: new USB bus registered, assigned bus number 4
hub 4-0:0: USB hub found
hub 4-0:0: 2 ports detected
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver tiglusb
drivers/usb/misc/tiglusb.c: TI-GRAPH LINK USB (aka SilverLink) driver, version 1.06
mice: PS/2 mouse device common for all mice
input: PC Speaker
gameport: NS558 PnP at pnp00:06 io 0x200 size 8 speed 784 kHz
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
LLC 2.0 by Procom, 1997, Arnaldo C. Melo, 2001, 2002
NET 4.0 IEEE 802.2 extended support
NET4.0 IEEE 802.2 BSD sockets, Jay Schulist, 2001, Arnaldo C. Melo, 2002
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
NET4: Linux IPX 0.50 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000-2002 Conectiva, Inc.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 201k freed
VFS: Mounted root (ext2 filesystem).
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x501
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(fs/jbd/recovery.c, 253): journal_recover: JBD: recovery, exit status 0, recovered transactions 233998 to 234012
(fs/jbd/recovery.c, 255): journal_recover: JBD: Replayed 400 and revoked 0/1 blocks
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 136k freed
hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 2-0:0: new USB device on port 1, assigned address 2
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-00:03.0-1
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,2), internal journal
Adding 1004020k swap on /dev/hda6.  Priority:-1 extents:1
intel8x0: clocking to 48000
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 801 $ Ben Collins <bcollins@debian.org>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[de800000-de8007ff]  Max Packet=[2048]
ieee1394: Host added: ID:BUS[00:1023]  GUID[00e018000006d3df]  [Unknown] (Linux OHCI-1394)
Disabled Privacy Extensions on device c03ca500(lo)
eth0: Media Link On 100mbps full-duplex 
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
eth0: no IPv6 routers present
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
nvidia: no version magic, tainting kernel.
nvidia: module license 'unspecified' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4191  Mon Dec  9 11:49:01 PST 2002
Linux agpgart interface v0.100 (c) Dave Jones
0: NVRM: AGPGART: unable to retrieve symbol table
Unable to handle kernel paging request at virtual address db608000
 printing eip:
c013bfb2
*pde = 1b4001e3
Oops: 0002 [#1]
CPU:    0
EIP:    0060:[<c013bfb2>]    Tainted: PF 
EFLAGS: 00010206
EIP is at do_anonymous_page+0x9e/0x202
eax: 00000000   ebx: 00000000   ecx: 00000400   edx: db608000
esi: c1447140   edi: db608000   ebp: dc8ffed4   esp: dc8ffeb8
ds: 007b   es: 007b   ss: 0068
Process uname (pid: 1054, threadinfo=dc8fe000 task=dfcd2780)
Stack: c1447140 00000003 00000001 db2a5780 da3d1400 40015000 dcc80c80 dc8fff04 
       c013c5c0 dcc80c80 dcf19700 db248054 da3d1400 00000001 40015000 c013d282 
       dcc80c80 dcc80ca0 40015000 dc8fffb4 c0118dcd dcc80c80 dcf19700 40015000 
Call Trace:
 [<c013c5c0>] handle_mm_fault+0xe6/0x15e
 [<c013d282>] __vma_link+0x38/0x9e
 [<c0118dcd>] do_page_fault+0x131/0x430
 [<c013d9b6>] do_mmap_pgoff+0x3ca/0x670
 [<c0110577>] sys_mmap2+0x77/0xa8
 [<c0118c9c>] do_page_fault+0x0/0x430
 [<c010b5bd>] error_code+0x2d/0x38

Code: f3 ab 89 14 24 c7 44 24 04 03 00 00 00 e8 04 db fd ff 8b 55 
 <6>note: uname[1054] exited with preempt_count 1
bad: scheduling while atomic!
Call Trace:
 [<c011a58d>] schedule+0x329/0x32e
 [<c013b02b>] unmap_vmas+0x1c5/0x222
 [<c013e752>] exit_mmap+0x76/0x172
 [<c011b8e4>] mmput+0x3e/0x80
 [<c011f0d9>] do_exit+0xf9/0x310
 [<c010bb52>] do_divide_error+0x0/0xde
 [<c0118edf>] do_page_fault+0x243/0x430
 [<c0135b81>] do_page_cache_readahead+0x77/0x136
 [<c0135cae>] page_cache_readahead+0x6e/0x17a
 [<c0133fcf>] buffered_rmqueue+0x93/0xfc
 [<c0118c9c>] do_page_fault+0x0/0x430
 [<c010b5bd>] error_code+0x2d/0x38
 [<c013bfb2>] do_anonymous_page+0x9e/0x202
 [<c013c5c0>] handle_mm_fault+0xe6/0x15e
 [<c013d282>] __vma_link+0x38/0x9e
 [<c0118dcd>] do_page_fault+0x131/0x430
 [<c013d9b6>] do_mmap_pgoff+0x3ca/0x670
 [<c0110577>] sys_mmap2+0x77/0xa8
 [<c0118c9c>] do_page_fault+0x0/0x430
 [<c010b5bd>] error_code+0x2d/0x38

microcode: CPU0 no microcode found! (sig=f24, pflags=4)
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
0: NVRM: AGPGART: unable to retrieve symbol table
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
microcode: CPU0 no microcode found! (sig=f24, pflags=4)
0: NVRM: AGPGART: unable to retrieve symbol table
general protection fault: 0000 [#2]
CPU:    0
EIP:    0060:[<c0140192>]    Tainted: PF 
EFLAGS: 00013286
EIP is at page_remove_rmap+0xbc/0x12e
eax: ffffffff   ebx: dba82300   ecx: ffffffff   edx: 0000001f
esi: c141ccb0   edi: 00000000   ebp: db591e94   esp: db591e78
ds: 007b   es: 007b   ss: 0068
Process X (pid: 1464, threadinfo=db590000 task=da5b1880)
Stack: dba8104c ffffffff dba82300 1ba8104c c14416c8 dba8104c c141ccb0 db591ed4 
       c013b93f c1452428 00000007 c14416f0 da51e000 0000004c db3c5000 dd2ad500 
       db591ed4 c14416c8 db6c8b00 c141ccb0 da9fa400 400130b0 dd2ad500 db591f04 
Call Trace:
 [<c013b93f>] do_wp_page+0x23d/0x342
 [<c013c629>] handle_mm_fault+0x14f/0x15e
 [<c0118dcd>] do_page_fault+0x131/0x430
 [<c0118c9c>] do_page_fault+0x0/0x430
 [<c010b5bd>] error_code+0x2d/0x38

Code: 8b 01 85 c0 89 45 e8 74 03 0f 18 00 31 d2 8b 44 91 04 85 c0 
 <6>note: X[1464] exited with preempt_count 1
bad: scheduling while atomic!
Call Trace:
 [<c011a58d>] schedule+0x329/0x32e
 [<c013b02b>] unmap_vmas+0x1c5/0x222
 [<c013e752>] exit_mmap+0x76/0x172
 [<c011b8e4>] mmput+0x3e/0x80
 [<c011f0d9>] do_exit+0xf9/0x310
 [<c010c23c>] do_general_protection+0x0/0x94
 [<c010bb52>] do_divide_error+0x0/0xde
 [<c010c284>] do_general_protection+0x48/0x94
 [<c010b5bd>] error_code+0x2d/0x38
 [<c0140192>] page_remove_rmap+0xbc/0x12e
 [<c013b93f>] do_wp_page+0x23d/0x342
 [<c013c629>] handle_mm_fault+0x14f/0x15e
 [<c0118dcd>] do_page_fault+0x131/0x430
 [<c0118c9c>] do_page_fault+0x0/0x430
 [<c010b5bd>] error_code+0x2d/0x38

bad: scheduling while atomic!
Call Trace:
 [<c011a58d>] schedule+0x329/0x32e
 [<c013b02b>] unmap_vmas+0x1c5/0x222
 [<c013e752>] exit_mmap+0x76/0x172
 [<c011b8e4>] mmput+0x3e/0x80
 [<c011f0d9>] do_exit+0xf9/0x310
 [<c010c23c>] do_general_protection+0x0/0x94
 [<c010bb52>] do_divide_error+0x0/0xde
 [<c010c284>] do_general_protection+0x48/0x94
 [<c010b5bd>] error_code+0x2d/0x38
 [<c0140192>] page_remove_rmap+0xbc/0x12e
 [<c013b93f>] do_wp_page+0x23d/0x342
 [<c013c629>] handle_mm_fault+0x14f/0x15e
 [<c0118dcd>] do_page_fault+0x131/0x430
 [<c0118c9c>] do_page_fault+0x0/0x430
 [<c010b5bd>] error_code+0x2d/0x38

bad: scheduling while atomic!
Call Trace:
 [<c011a58d>] schedule+0x329/0x32e
 [<c013b02b>] unmap_vmas+0x1c5/0x222
 [<c013e752>] exit_mmap+0x76/0x172
 [<c011b8e4>] mmput+0x3e/0x80
 [<c011f0d9>] do_exit+0xf9/0x310
 [<c010c23c>] do_general_protection+0x0/0x94
 [<c010bb52>] do_divide_error+0x0/0xde
 [<c010c284>] do_general_protection+0x48/0x94
 [<c010b5bd>] error_code+0x2d/0x38
 [<c0140192>] page_remove_rmap+0xbc/0x12e
 [<c013b93f>] do_wp_page+0x23d/0x342
 [<c013c629>] handle_mm_fault+0x14f/0x15e
 [<c0118dcd>] do_page_fault+0x131/0x430
 [<c0118c9c>] do_page_fault+0x0/0x430
 [<c010b5bd>] error_code+0x2d/0x38

bad: scheduling while atomic!
Call Trace:
 [<c011a58d>] schedule+0x329/0x32e
 [<c013b02b>] unmap_vmas+0x1c5/0x222
 [<c013e752>] exit_mmap+0x76/0x172
 [<c011b8e4>] mmput+0x3e/0x80
 [<c011f0d9>] do_exit+0xf9/0x310
 [<c010c23c>] do_general_protection+0x0/0x94
 [<c010bb52>] do_divide_error+0x0/0xde
 [<c010c284>] do_general_protection+0x48/0x94
 [<c010b5bd>] error_code+0x2d/0x38
 [<c0140192>] page_remove_rmap+0xbc/0x12e
 [<c013b93f>] do_wp_page+0x23d/0x342
 [<c013c629>] handle_mm_fault+0x14f/0x15e
 [<c0118dcd>] do_page_fault+0x131/0x430
 [<c0118c9c>] do_page_fault+0x0/0x430
 [<c010b5bd>] error_code+0x2d/0x38

bad: scheduling while atomic!
Call Trace:
 [<c011a58d>] schedule+0x329/0x32e
 [<c013b02b>] unmap_vmas+0x1c5/0x222
 [<c013e752>] exit_mmap+0x76/0x172
 [<c011b8e4>] mmput+0x3e/0x80
 [<c011f0d9>] do_exit+0xf9/0x310
 [<c010c23c>] do_general_protection+0x0/0x94
 [<c010bb52>] do_divide_error+0x0/0xde
 [<c010c284>] do_general_protection+0x48/0x94
 [<c010b5bd>] error_code+0x2d/0x38
 [<c0140192>] page_remove_rmap+0xbc/0x12e
 [<c013b93f>] do_wp_page+0x23d/0x342
 [<c013c629>] handle_mm_fault+0x14f/0x15e
 [<c0118dcd>] do_page_fault+0x131/0x430
 [<c0118c9c>] do_page_fault+0x0/0x430
 [<c010b5bd>] error_code+0x2d/0x38

bad: scheduling while atomic!
Call Trace:
 [<c011a58d>] schedule+0x329/0x32e
 [<c013b02b>] unmap_vmas+0x1c5/0x222
 [<c013e752>] exit_mmap+0x76/0x172
 [<c011b8e4>] mmput+0x3e/0x80
 [<c011f0d9>] do_exit+0xf9/0x310
 [<c010c23c>] do_general_protection+0x0/0x94
 [<c010bb52>] do_divide_error+0x0/0xde
 [<c010c284>] do_general_protection+0x48/0x94
 [<c010b5bd>] error_code+0x2d/0x38
 [<c0140192>] page_remove_rmap+0xbc/0x12e
 [<c013b93f>] do_wp_page+0x23d/0x342
 [<c013c629>] handle_mm_fault+0x14f/0x15e
 [<c0118dcd>] do_page_fault+0x131/0x430
 [<c0118c9c>] do_page_fault+0x0/0x430
 [<c010b5bd>] error_code+0x2d/0x38

general protection fault: 0000 [#3]
CPU:    0
EIP:    0060:[<c0140192>]    Tainted: PF 
EFLAGS: 00013286
EIP is at page_remove_rmap+0xbc/0x12e
eax: ffffffff   ebx: dba82300   ecx: ffffffff   edx: 0000001f
esi: c146ffa0   edi: 00000000   ebp: da3bbb64   esp: da3bbb48
ds: 007b   es: 007b   ss: 0068
Process X (pid: 1465, threadinfo=da3ba000 task=da5b1880)
Stack: da6ae360 ffffffff dba82300 1a6ae360 da6ae360 00090000 00166000 da3bbb94 
       c013ad1b c146ee48 00000007 da3bbbc0 da3bbba4 c146ffa0 1c664005 c0434894 
       da9fa084 08448000 081ae000 da3bbbbc c013ade2 c0434894 da9fa080 08048000 
Call Trace:
 [<c013ad1b>] zap_pte_range+0x15b/0x1d6
 [<c013ade2>] zap_pmd_range+0x4c/0x68
 [<c013ae3f>] unmap_page_range+0x41/0x68
 [<c013af38>] unmap_vmas+0xd2/0x222
 [<c013e752>] exit_mmap+0x76/0x172
 [<c011b8e4>] mmput+0x3e/0x80
 [<c0150882>] exec_mmap+0x8e/0xf2
 [<c015094a>] flush_old_exec+0x1a/0x6e8
 [<c01507e6>] kernel_read+0x4a/0x58
 [<c016a5df>] load_elf_binary+0x2f7/0xc5a
 [<c01340bb>] __alloc_pages+0x83/0x2aa
 [<c01eaa2a>] __copy_from_user_ll+0x70/0x76
 [<c015138c>] search_binary_handler+0x104/0x1a8
 [<c01515b4>] do_execve+0x184/0x1c8
 [<c0109697>] sys_execve+0x4b/0x7a
 [<c010ab93>] syscall_call+0x7/0xb

Code: 8b 01 85 c0 89 45 e8 74 03 0f 18 00 31 d2 8b 44 91 04 85 c0 
 <6>note: X[1465] exited with preempt_count 1

[-- Attachment #4: panic.txt --]
[-- Type: text/plain, Size: 1093 bytes --]

EFLAGS: 00010893
EIP is at scheduler_tick+0x96/0x2b8
eax: 74684769   ebx: 00000000   ecx: 00000000   edx: 00000003
esi: d0042444   edi: 00000001   ebp: c0429e8c   esp: c0429e74
ds: 007b   es: 007b   ss: 0068
Process: :???:?<`"^,?:d`9l?`9MF`8??`6?k?6???5?V`5JE?5H?`4M%?3?B`Tim Powers <timp@redhat.com> (pid: 543519605, threadinfo=c0428000 task=d0042444)
Stack: 00000000 00000000 c0461974 00000000 00000001 c0429f24 c0429eac c0123e9c
       00000000 00000001 00000001 00000000 c0429f24 20000001 c0429ebc c012401f
       00000000 c0429f24 c0429ed8 c0110202 c0429f24 c038b21c c038abc0 20000001
Call Trace:
 [<c0123e9c>] update_process_times+0x46/0x50
 [<c012401f>] do_timer+0x35/0xee
 [<c0110202>] timer_interrupt+0x62/0x106
 [<c010cb59>] handle_IRQ_event+0x37/0x5e
 [<c010ccd6>] do_IRQ+0x80/0xd6
 [<c010b500>] common_interrupt+0x18/0x20
 [<c011007b>] set_rtc_mmss+0x5f/0x184
 [<c010bb4d>] die+0x7d/0x82
 [<c0118edf>] do_page_fault+0x243/0x430

Code: 0f ab 50 08 83 c4 0c 5b 5e 5f 5d c3 8b 46 2c 85 c0 74 06 83
 <0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing

Re: Kernel Panic

[dan carpenter]

On Wednesday 26 March 2003 09:22 pm, David van Hoose wrote:
> nvidia: no version magic, tainting kernel.
> nvidia: module license 'unspecified' taints kernel.
> 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4191  Mon

Looks like an nvidia bug.  The source for that isn't available so you
should direct bug reports to their web site.

regards,
dan carpenter

Re: Kernel panic

[Matt Porter]

On Wed, Oct 30, 2002 at 01:36:00AM +0530, Aman wrote:
>
> Hi All
>
> I am trying to build linux image with ramdisk and download to the PPC 440GP
> evalkit. Earlier the filesystem was using nfs mount, now I hv builded a
> zImage.initrd with ramdisk.image [I havent compressed the ramdisk image]. To
> build the ramdisk, I used the procedure defined by HHL.. I defined the
> ramdisk size as 8MB. However when I booted  with the image built. I am
> getting a kernel panic error. I have pasted the output below.  One question
> , how should we decide about the files to be loaded in ramdisk which will
> be needed by  kernel image.
>
> Thanking you in advance.
> Regards
> Aman
>
>
> Loading file "zImage.initrd" ...
> Sending tftp boot request ...
> Transfer Complete ...
> Loaded successfully ...
> Entry point at 0x1000000 ...
> loaded at:     01000000 018821BC
> zimage at:     01005950 0107E2C9
> initrd at:     0107F000 0187F000
> avail ram:     00400000 00800000
>
> Linux/PPC load: root=/dev/ram ramdisk_size=8192
> Uncompressing Linux...done.
> Now booting the kernel
> Linux version 2.4.17_mvl21-ebony (root@hardhat) (gcc version 2.95.3 20010315
	        ^^^^^^^^^^^^^^^^^^

Basic questions like this on a vendor-specific kernel (and a
"procedure defined by HHL") might be better answered by contacting
your vendor's support arm.

I have no problem with initrds using a ramdisk.image.gz created via
"dd if=/dev/zero ...", mke2fs, and populated via a loopback mount.
Looks like you have ramdisk size set properly...make sure the
filesytem (ext2) is built-in.

Regards,
--
Matt Porter
porter@cox.net
This is Linux Country. On a quiet night, you can hear Windows reboot.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Kernel panic

[Aman]

Hi All

I am trying to build linux image with ramdisk and download to the PPC 440GP
evalkit. Earlier the filesystem was using nfs mount, now I hv builded a
zImage.initrd with ramdisk.image [I havent compressed the ramdisk image]. To
build the ramdisk, I used the procedure defined by HHL.. I defined the
ramdisk size as 8MB. However when I booted  with the image built. I am
getting a kernel panic error. I have pasted the output below.  One question
, how should we decide about the files to be loaded in ramdisk which will
be needed by  kernel image.

Thanking you in advance.
Regards
Aman


Loading file "zImage.initrd" ...
Sending tftp boot request ...
Transfer Complete ...
Loaded successfully ...
Entry point at 0x1000000 ...
loaded at:     01000000 018821BC
zimage at:     01005950 0107E2C9
initrd at:     0107F000 0187F000
avail ram:     00400000 00800000

Linux/PPC load: root=/dev/ram ramdisk_size=8192
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.4.17_mvl21-ebony (root@hardhat) (gcc version 2.95.3 20010315
(release/MontaVista)) #18 Tue Oct 29 19:28:19 IST 2002
IBM Ebony port (C) 2002 MontaVista Software, Inc. (source@mvista.com)
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram ramdisk_size=8192
Calibrating delay loop... 599.65 BogoMIPS
Memory: 119264k available (876k kernel code, 344k data, 68k init, 0k
highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0xfdfe9200 (irq = 0) is a 16550A
ttyS01 at 0xfdfe8300 (irq = 1) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
eth0: Phy @ 0x8, type Am79c875A (0x00225541)
Reset ethernet interfaces
eth1: Phy @ 0x9, type Am79c875A (0x00225541)
Reset ethernet interfaces
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
eth0: IBM EMAC: link up, 100 Mbps Full Duplex, auto-negotiation complete.
eth0: IBM EMAC: MAC 00:04:ac:e3:1b:b5.
eth0: IBM EMAC: open completed
eth1: IBM EMAC: link up, 10 Mbps Half Duplex.
eth1: IBM EMAC: MAC 00:04:ac:e3:1b:b6.
eth1: IBM EMAC: open completed
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.13.242, my address is
192.168.13.246
IP-Config: Complete:
      device=eth0, addr=192.168.13.246, mask=255.255.255.0,
gw=255.255.255.255,
     host=192.168.13.246, domain=, nis-domain=(none),
     bootserver=192.168.13.242, rootserver=192.168.13.242,
rootpath=/hdb/mountpt
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 8192 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 8192k freed
Kernel panic: VFS: Unable to mount root fs on 01:00
 <0>Rebooting in 180 seconds..


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Kernel panic

[Alan Cox]

> These are the messages I see on my terminal, I cannot see any more as this is the highest mode my monitor can support:
> 
> -------------------------
> <1>Unable to handle kernel NULL pointer deference at virtual address 00000000
> Oops: 0000
> CPU:   0
> EIP:   0010:[<00000000>]   Tainted: P

What binary only modules  do you have loaded given the tainted marker
is set ?

Kernel panic

[Daniel Mundy]

Hi, 

Lately I am having kernel panic's, and I have no idea why.. I have not changed anything lately except for regular
software updates. I am using Debian Woody 3.0, packages updated daily, with a 2.4.18 kernel. I have not noticed any
pattern in occurance, the other day it happened just after I dialed my ISP, about 20 minutes ago I was simply using
vim from my windows box via ssh, and just now I had it freeze again after typing `vim .<tab>`..

I also noticed that on reboot, it presents me with "(none) login:" rather than using my hostname of xion as per
usual.. an `ifconfig` shows nothing, ifconfig simply lists lo, and no eth0. Another reboot fixes this. This has only
happened once, I just had another kernel panic and this time on reboot my network is fine, so I am not sure whether
this is related.

These are the messages I see on my terminal, I cannot see any more as this is the highest mode my monitor can support:

-------------------------
<1>Unable to handle kernel NULL pointer deference at virtual address 00000000
 printing eip:
000000
*pde = 000000
Oops: 0000
CPU:   0
EIP:   0010:[<00000000>]   Tainted: P
EFLAGS: 00010246
eax: 00000000   ebx: c6af3b40   ecx: c52df1eo   edx: 00000014
esi: c6af3c78   edi: c6d530bc   ebp: c6af3c78   esp: c030dd9c
ds: 0018   es: 0018   ss: 0018
Process Swapper (pid: 0, stackpage=c030d000)
Stack: c02636oe c6af3b40 c6d530bc 00000014 c52df1e0 61f6f8a5 c6af3b40 c52df640
(more lines of this, my monitor is almost dead so was hard to read, if it is needed though I can find it out the next
time this problem occurs)
Call Trace: [<c026360e>] [<c0265bd6>] (etc, see above)

Code: Bad EIP value.
 <0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
-------------------------

I asked around a bit on IRC and it was suggested I try asking here as this seems a kernel related problem. Thanks for
any help you can offer, if any more information about my situation is required let me know.

Regards,
Daniel Mundy

Re: Kernel panic

[Andre Hedrick]

Lionel,

Please add your name to the Maintainer List for the SIS5513 chipset code.
As you have the hardware and testing it and answering questions, for what
it is worth imho, you have earn the right to put your name there.

Regards,

Andre Hedrick
Linux Disk Certification Project                Linux ATA Development


On Wed, 6 Mar 2002, Lionel Bouton wrote:

> On Tue, Mar 05, 2002 at 11:31:41PM +0100, Hanno Böck wrote:
> > I have a PC with an Athlon CPU, which has problems with newer kernel-versions. (see lspci-output below)
> > 
> > If I want to boot current Knoppix or Mandrake 8.2beta3 install cds (both based on kernel 2.4.17), it says:
> > 
> > Kernel panic: VFS: Unable to mount root fs on 03:05
> > 
> > It worked fine with the older mandrake 8.1 with kernel 2.4.8.
> > 
> > Any ideas? How can I help to fix this?
> > 
> 
> Try passing ide=nodma during install and following reboot(s) then fetch a patch
> at:
> http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
> , apply, recompile, install.
> 
> SiS730 support should be OK with latest patches.
> 
> LB.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

Re: Kernel panic

[Lionel Bouton]

On Tue, Mar 05, 2002 at 11:31:41PM +0100, Hanno Böck wrote:
> I have a PC with an Athlon CPU, which has problems with newer kernel-versions. (see lspci-output below)
> 
> If I want to boot current Knoppix or Mandrake 8.2beta3 install cds (both based on kernel 2.4.17), it says:
> 
> Kernel panic: VFS: Unable to mount root fs on 03:05
> 
> It worked fine with the older mandrake 8.1 with kernel 2.4.8.
> 
> Any ideas? How can I help to fix this?
> 

Try passing ide=nodma during install and following reboot(s) then fetch a patch
at:
http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
, apply, recompile, install.

SiS730 support should be OK with latest patches.

LB.

Kernel panic

[Hanno Böck]

I have a PC with an Athlon CPU, which has problems with newer kernel-versions. (see lspci-output below)

If I want to boot current Knoppix or Mandrake 8.2beta3 install cds (both based on kernel 2.4.17), it says:

Kernel panic: VFS: Unable to mount root fs on 03:05

It worked fine with the older mandrake 8.1 with kernel 2.4.8.

Any ideas? How can I help to fix this?

Here is lspci output:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 02)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 82)
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 02)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 31)

Re: kernel panic

[Fernando Korndorfer]

Are you trying to mount a SCSI disk as root without having the correct SCSI
driver IN the kernel?

just a gues...


-----------------------------------------------
Fernando Korndorfer
Novo Hamburgo, RS, Brasil
-----------------------------------------------

Re: kernel panic

[Justin Carlson]

[-- Attachment #1: Type: text/plain, Size: 855 bytes --]


> The problem is while booting the kernel with my newly
> developed floppy, I am getting the error message
> 
> kernel panic: VFS: Unable to mount root fs on 08:03
> 
> I donno what to do. Is it some thing related to "make
> xconfig" options or some other thing. Please give me
> suggestion.

I guess the obvious questions are:

What kind of filesystem are you trying to mount as root?  Have you
checked whether a root argument is being passed to the kernel by
whatever loader you're using?

Did you inadvertently disable support for that kind of filesystem?

If you're mounting root over NFS, did you disable support for 
any of the networking options you might need?  (like, say, kernel-level
IP autoconfiguration).

In short, what changed between the last configuration that worked,
and this one that doesn't?  

-Justin



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 232 bytes --]

kernel panic

[chiranjeevi vaka]

Hi all,

I am working on linux kernel tcp/ip optimization.
After doing some changes in my kernel, I am copiling
the kernel. While doing make xconfig, I have seleceted
some of known options and later as usual I have done
make dep;make bzdisk. 

The problem is while booting the kernel with my newly
developed floppy, I am getting the error message

kernel panic: VFS: Unable to mount root fs on 08:03

I donno what to do. Is it some thing related to "make
xconfig" options or some other thing. Please give me
suggestion.

Thanking you in advance
Murali.

__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com

kernel panic

[Balaji]

Hi,

Does anyone happen to get the following error message?
Kernel panic: rs_set_termios called

Actually the kernel boots and when the /sbin/init executes, it
gives the above message and hangs. This panic is located in the serial 
drivers but I dont know why they are called.

Any help would be greatly appreciated.


Best regards,
Balaji






_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com

kernel panic

[nntp]

Hello everyone,

I've been having a problem with kernel panics and I'm hoping someone can
suggest something.

Here is the specs for the machine:
Tyan dual Athlon (S2462)
2 MP-1800+ CPUs
2 GB ECC DDR (4 x 512MB)
2 GB of swap space
RedHat 7.2 install /w custom kernel

I've tried several kernels, but the following oops's were on 2.4.17
compiled with high memory, SMP, and P3 optimizations.  This machine is under
a very heavy CPU, IO, and network load.  I've seen it run for days and I've
seen it lockup every 3 hours.  There doesn't seem to be any pattern other
than it dies while under heavy load.  Another thing of interest is that it
does a lot of network traffic through the loopback device (127.0.0.1).  The
dmulti process listed in the oops's below is basically a proxy that uses the
loopback device to talk to other processes on the same machine.  It's
transferring 20-30 mbits of data 24/7.

Output from 'free':

             total       used       free     shared    buffers     cached
Mem:       2061364    2050892      10472          0      49072    1229432
-/+ buffers/cache:     772388    1288976
Swap:      2097016     126296    1970720

The following was logged when the machine locked up hard:

Jan  2 05:53:15 news5 kernel: Unable to handle kernel NULL pointer
dereference at virtual address 000007e5
Jan  2 05:53:15 news5 kernel:  printing eip:
Jan  2 05:53:15 news5 kernel: c0237000
Jan  2 05:53:15 news5 kernel: *pde = 00000000
Jan  2 05:53:15 news5 kernel: Oops: 0000
Jan  2 05:53:15 news5 kernel: CPU:	1
Jan  2 05:53:15 news5 kernel: EIP:	0010:[<c0237000>]    Not tainted Jan
2 05:53:15 news5 kernel: EFLAGS: 00010286
Jan  2 05:53:15 news5 kernel: eax: 000006bd   ebx: 00000009   ecx:
e4a0e540
edx: 000007dd
Jan  2 05:53:15 news5 kernel: esi: e4a0e540   edi: 00000200   ebp:
00000001
esp: f2a65f30
Jan  2 05:53:15 news5 kernel: ds: 0018   es: 0018   ss: 0018
Jan  2 05:53:15 news5 kernel: Process dmulti (pid: 874,
stackpage=f2a65000) Jan  2 05:53:15 news5 kernel: Stack: c0141dd7
e4a0e540 00000000 f2a65f54 00000145 f2a64000 00000064 00000129
Jan  2 05:53:15 news5 kernel:        00000000 00000000 d8797000 00000020
bffffce8 d313f300 00000400 c0142259
Jan  2 05:53:15 news5 kernel:        00000282 f2a65f90 f2a65f8c f1aeef60
00000030 00000080 d313f000 00000064
Jan  2 05:53:15 news5 kernel: Call Trace: [<c0141dd7>] [<c0142259>]
[<c0106f1b>] Jan  2 05:53:15 news5 kernel:
Jan  2 05:53:15 news5 kernel: Code: 8b 80 28 01 00 00 ff 74 24 08 52 51
ff 50 1c 83 c4 0c c3 8d

I've never used ksymoops before, but it wrote the following trace when fed
the above oops:

>>EIP; c0237000 <sock_poll+10/30>   <=====
Trace; c0141dd7 <do_select+127/240>
Trace; c0142259 <sys_select+339/480>
Trace; c0106f1b <system_call+33/38>
Code;  c0237000 <sock_poll+10/30>
00000000 <_EIP>:
Code;  c0237000 <sock_poll+10/30>   <=====
   0:   8b 80 28 01 00 00         mov    0x128(%eax),%eax   <=====
Code;  c0237006 <sock_poll+16/30>
   6:   ff 74 24 08               pushl  0x8(%esp,1)
Code;  c023700a <sock_poll+1a/30>
   a:   52                        push   %edx
Code;  c023700b <sock_poll+1b/30>
   b:   51                        push   %ecx


Jan  2 05:53:15 news5 kernel:  <1>Unable to handle kernel NULL pointer
dereference at virtual address 000006ef
Jan  2 05:53:15 news5 kernel:  printing eip:
Jan  2 05:53:15 news5 kernel: c0148b86
Jan  2 05:53:15 news5 kernel: *pde = 00000000
Jan  2 05:53:15 news5 kernel: Oops: 0000
Jan  2 05:53:15 news5 kernel: CPU:	1
Jan  2 05:53:15 news5 kernel: EIP:	0010:[<c0148b86>]    Not tainted Jan
2 05:53:15 news5 kernel: EFLAGS: 00010202
Jan  2 05:53:15 news5 kernel: eax: f01027a0   ebx: 007fffff   ecx:
00000000
edx: 00000000
Jan  2 05:53:15 news5 kernel: esi: 000006bd   edi: 00000000   ebp:
e4a0e540
esp: f2a65da8
Jan  2 05:53:15 news5 kernel: ds: 0018   es: 0018   ss: 0018
Jan  2 05:53:15 news5 kernel: Process dmulti (pid: 874,
stackpage=f2a65000) Jan  2 05:53:15 news5 kernel: Stack: 00000001
007fffff e4a0e540 00000000 00000129 c01338bb 00000000 e4a0e540
Jan  2 05:53:15 news5 kernel:        00000000 007fffff f7547280 0000000a
c011838d e4a0e540 f7547280 00000000
Jan  2 05:53:15 news5 kernel:        f2a64000 f2a64000 0000000b c0118b8f
f7547280 0000000f c029a0f0 f2a65efc
Jan  2 05:53:15 news5 kernel: Call Trace: [<c01338bb>] [<c011838d>]
[<c0118b8f>] [<c0111e10>] [<c0107464>]
Jan  2 05:53:15 news5 kernel:	 [<c0112208>] [<c012d871>] [<c012d9c0>]
[<c0111e50>] [<c010700c>] [<c0237000>]
Jan  2 05:53:15 news5 kernel:	 [<c0141dd7>] [<c0142259>] [<c0106f1b>] Jan
2 05:53:15 news5 kernel:
Jan  2 05:53:15 news5 kernel: Code: 0f b7 46 32 25 00 f0 00 00 66 3d 00
40 74 0b b8 ec ff ff ff

ksymoops wrote from the above:

>>EIP; c0148b86 <fcntl_dirnotify+46/180>   <=====
Trace; c01338bb <filp_close+7b/a0>
Trace; c011838d <put_files_struct+4d/d0>
Trace; c0118b8f <do_exit+10f/240>
Trace; c0111e10 <bust_spinlocks+50/60>
Trace; c0107464 <die+54/70>
Trace; c0112208 <do_page_fault+3b8/500>
Trace; c012d871 <__alloc_pages+41/180>
Trace; c012d9c0 <__get_free_pages+10/20>
Trace; c0111e50 <do_page_fault+0/500>
Trace; c010700c <error_code+34/3c>
Trace; c0237000 <sock_poll+10/30>
Trace; c0141dd7 <do_select+127/240>
Trace; c0142259 <sys_select+339/480>
Trace; c0106f1b <system_call+33/38>
Code;  c0148b86 <fcntl_dirnotify+46/180>
00000000 <_EIP>:
Code;  c0148b86 <fcntl_dirnotify+46/180>   <=====
   0:   0f b7 46 32               movzwl 0x32(%esi),%eax   <=====
Code;  c0148b8a <fcntl_dirnotify+4a/180>
   4:   25 00 f0 00 00            and    $0xf000,%eax
Code;  c0148b8f <fcntl_dirnotify+4f/180>
   9:   66 3d 00 00               cmp    $0x0,%ax

The following was logged when the machine just removed one process.  The
process could not be restarted because the network port 119 was not released
when the process died.  I had to restart the machine.

Jan  2 02:28:31 news5 kernel: Unable to handle kernel paging request at
virtual address 3f4d0b35
Jan  2 02:28:31 news5 kernel:  printing eip:
Jan  2 02:28:31 news5 kernel: c0237000
Jan  2 02:28:31 news5 kernel: *pde = 00000000
Jan  2 02:28:31 news5 kernel: Oops: 0000
Jan  2 02:28:31 news5 kernel: CPU:	0
Jan  2 02:28:31 news5 kernel: EIP:	0010:[<c0237000>]    Not tainted
Jan  2 02:28:31 news5 kernel: EFLAGS: 00010286
Jan  2 02:28:31 news5 kernel: eax: 3f4d0a0d   ebx: 00000003   ecx: ee7f44a0
edx: 3f4d0b2d
Jan  2 02:28:31 news5 kernel: esi: ee7f44a0   edi: 10000000   ebp: 00000000
esp: ee9a7f30
Jan  2 02:28:31 news5 kernel: ds: 0018   es: 0018   ss: 0018
Jan  2 02:28:31 news5 kernel: Process dmulti (pid: 885, stackpage=ee9a7000)
Jan  2 02:28:31 news5 kernel: Stack: c0141dd7 ee7f44a0 00000000 ee9a7f54
00000145 ee9a6000 00000062 0000007c
Jan  2 02:28:31 news5 kernel:        00000000 00000000 e3d65000 00000020
bffffce8 d6eb8b00 00000400 c0142259
Jan  2 02:28:31 news5 kernel:        000001ed ee9a7f90 ee9a7f8c ec293160
00000011 00000080 d6eb8800 00000064
Jan  2 02:28:31 news5 kernel: Call Trace: [<c0141dd7>] [<c0142259>] [<c0106f1b>]
Jan  2 02:28:31 news5 kernel:
Jan  2 02:28:31 news5 kernel: Code: 8b 80 28 01 00 00 ff 74 24 08 52 51 ff
50 1c 83 c4 0c c3 8d

ksymoops wrote:
>>EIP; c0237000 <sock_poll+10/30>   <=====
Trace; c0141dd7 <do_select+127/240>
Trace; c0142259 <sys_select+339/480>
Trace; c0106f1b <system_call+33/38>
Code;  c0237000 <sock_poll+10/30>
00000000 <_EIP>:
Code;  c0237000 <sock_poll+10/30>   <=====
   0:   8b 80 28 01 00 00         mov    0x128(%eax),%eax   <=====
Code;  c0237006 <sock_poll+16/30>
   6:   ff 74 24 08               pushl  0x8(%esp,1)
Code;  c023700a <sock_poll+1a/30>
   a:   52                        push   %edx
Code;  c023700b <sock_poll+1b/30>
   b:   51                        push   %ecx
Code;  c023700c <sock_poll+1c/30>
   c:   ff 00                     incl   (%eax)




Jan  2 02:28:31 news5 kernel:  <1>Unable to handle kernel paging request at
virtual address 3f4d0a3f
Jan  2 02:28:31 news5 kernel:  printing eip:
Jan  2 02:28:31 news5 kernel: c0148b86
Jan  2 02:28:31 news5 kernel: *pde = 00000000
Jan  2 02:28:31 news5 kernel: Oops: 0000
Jan  2 02:28:31 news5 kernel: CPU:	0
Jan  2 02:28:31 news5 kernel: EIP:	0010:[<c0148b86>]    Not tainted
Jan  2 02:28:31 news5 kernel: EFLAGS: 00010202
Jan  2 02:28:31 news5 kernel: eax: ee0065e0   ebx: 0000000f   ecx: 00000000
edx: 00000000
Jan  2 02:28:31 news5 kernel: esi: 3f4d0a0d   edi: 00000000   ebp: ee7f44a0
esp: ee9a7da8
Jan  2 02:28:31 news5 kernel: ds: 0018   es: 0018   ss: 0018
Jan  2 02:28:31 news5 kernel: Process dmulti (pid: 885, stackpage=ee9a7000)
Jan  2 02:28:31 news5 kernel: Stack: 00000001 0000000f ee7f44a0 00000000
0000007c c01338bb 00000000 ee7f44a0
Jan  2 02:28:31 news5 kernel:        00000000 0000000f f33405c0 00000004
c011838d ee7f44a0 f33405c0 00000000
Jan  2 02:28:31 news5 kernel:        ee9a6000 ee9a6000 0000000b c0118b8f
f33405c0 00000000 0000002e f3349f64
Jan  2 02:28:31 news5 kernel: Call Trace: [<c01338bb>] [<c011838d>]
[<c0118b8f>] [<c0107477>] [<c0112208>]
Jan  2 02:28:31 news5 kernel:	 [<c0239efc>] [<c023a070>] [<c023d992>] [<c0119e7b>]
[<c01089bd>] [<c010ac18>]
Jan  2 02:28:31 news5 kernel:	 [<c0111e50>] [<c010700c>] [<c0237000>] [<c0141dd7>]
[<c0142259>] [<c0106f1b>]
Jan  2 02:28:31 news5 kernel:
Jan  2 02:28:31 news5 kernel: Code: 0f b7 46 32 25 00 f0 00 00 66 3d 00 40
74 0b b8 ec ff ff ff

ksymoops wrote the follow from the above:

>>EIP; c0148b86 <fcntl_dirnotify+46/180>   <=====
Trace; c01338bb <filp_close+7b/a0>
Trace; c011838d <put_files_struct+4d/d0>
Trace; c0118b8f <do_exit+10f/240>
Trace; c0107477 <die+67/70>
Trace; c0112208 <do_page_fault+3b8/500>
Trace; c0239efc <kfree_skbmem+c/70>
Trace; c023a070 <__kfree_skb+110/120>
Trace; c023d992 <net_tx_action+62/140>
Trace; c0119e7b <do_softirq+7b/e0>
Trace; c01089bd <do_IRQ+dd/f0>
Trace; c010ac18 <call_do_IRQ+5/d>
Trace; c0111e50 <do_page_fault+0/500>
Trace; c010700c <error_code+34/3c>
Trace; c0237000 <sock_poll+10/30>
Trace; c0141dd7 <do_select+127/240>
Trace; c0142259 <sys_select+339/480>
Trace; c0106f1b <system_call+33/38>
Code;  c0148b86 <fcntl_dirnotify+46/180>
00000000 <_EIP>:
Code;  c0148b86 <fcntl_dirnotify+46/180>   <=====
   0:   0f b7 46 32               movzwl 0x32(%esi),%eax   <=====
Code;  c0148b8a <fcntl_dirnotify+4a/180>
   4:   25 00 f0 00 00            and    $0xf000,%eax
Code;  c0148b8f <fcntl_dirnotify+4f/180>
   9:   66 3d 00 40               cmp    $0x4000,%ax


Does this help any?

Thanks,
Steve.

kernel panic

[Geoffrey]

I'm looking for the proper forum for posting a (possible) kernel bug. 
I'm receiving a panic when attempting to write a cdrw under 2.4.12.

I don't know that this is a bug, but I would expect some other activity
rather than a panic/lockup.

Suggestions as to the proper forum would be appreciated.

--
Until later: Geoffrey		esoteric@3times25.net

"...the system (Microsoft passport) carries significant risks to users
that
are not made adequately clear in the technical documentation available."
- David P. Kormann and Aviel D. Rubin, AT&T Labs - Research
- http://www.avirubin.com/passport.html

kernel panic...........

[karanth karanth]

Hai,
I have been using mpc823 with 2.2.14 kernel, below shows the output message of the kernel panic.

Boot

loaded at	: 00000000 	000141B4
board data at	: 00202344	00202374
zimage at	: 0038A000	0007E0B1
avail ram		: 002141B4	0038A000

Linux/PPC load: console=ttyS0, 19200n8!

Uncompressing Linux...done
hold_residual=00600100
Now booting the kernel
###########################
NIP 00000000 XER: E000B97F LR: C0006564 REGS: c00f7e50 TRAP: 0400
MSR: 08209032 EE: 1 PR: 0 FP:0 ME: 1  IR/DR: 11
TASK = c00f6000[1] 'swapper'  mm->pgd c017f000 Last syscall = -1
last math 00000000

GPR00:	00000078  C00F7F40  C00F6000  00000E00    00000000    00000E000  00000000  C00CE857
GPR08:	00000024  C00D0000  FF002068  C00B3AC8 956DF039   000000000  00000000   00100000
GPR16:	04000000  FF000000   0000006E   00000000    00020000    00202344    00000000   02008000
GPR24:	00200000  00080080    00000000   00600015    00600000    00000000    C00C0000  C00C0000
Call backtrace:
00000000
Instruction DUMP:
kernel panic: kernel access of bad area pc 0 lr c0006564 address 0 tst swapper/1
Rebooting in 180 secound ...
########################
can anybody tell me what could be the reason of the crash.

Thanking you,
kk.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Kernel Panic

[Chmouel Boudjnah]

Dave Seff <dseff@bloomberg.com> writes:

> I am not subscribed to this list, so please cc me on
> replies. Thanks.  I was running mke2fs on an external 17GB SCSI
> drive. This started spewing and blasted the 2.2.17mdksmp kernel.


could you generate it with ksymoops(include kernel-utils rpm) like explain in :

/usr/src/linux-2.2.17/REPORTING-BUGS

> ncr53c896-0:2: ERROR (0:4) (8-0-0) (0/f) @ (script 42c:0f000001).
> ncr53c896-0: script cmd = 71500000 ncr53c896-0: regdump: da 00 80 0f
> 47 00 02 0b 81 00 82 00 80 00 08 02.

-- 
MandrakeSoft Inc                     http://www.chmouel.org
                      --Chmouel
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Kernel Panic

[Dave Seff]

I am not subscribed to this list, so please cc me on replies. Thanks. 
I was running mke2fs on an external 17GB SCSI drive. This started spewing and 
blasted the 2.2.17mdksmp kernel. 



ncr53c896-0:2: ERROR (0:4) (8-0-0) (0/f) @ (script 42c:0f000001).
ncr53c896-0: script cmd = 71500000
ncr53c896-0: regdump: da 00 80 0f 47 00 02 0b 81 00 82 00 80 00 08 02.
ncr53c896-0: have to clear fifos.
ncr53c896-0: unexpected disconnect
ncr53c896-0:2: ERROR (0:4) (8-0-0) (0/7) @ (script dc:870b0000).
ncr53c896-0: script cmd = 900a0000
ncr53c896-0: regdump: da 00 80 07 47 00 02 0b 02 08 00 00 80 00 03 02.
ncr53c896-0: have to clear fifos.
ncr53c896-0: unexpected disconnect
ncr53c896-0: SCSI parity error detected: SCR1=138 DBC=870b0000 SSTAT1=3
ncr53c896-0:2: SIR 16, incorrect nexus identification on reselection
ncr53c896-0:2: ERROR (81:0) (6-a3-2) (0/7) @ (scripth 12c0:48000000).
ncr53c896-0: script cmd = 80080000
ncr53c896-0: regdump: da 00 00 07 47 00 02 0b 76 00 82 00 80 00 00 02.
ncr53c896-0: have to clear fifos.
Unable to handle kernel NULL pointer dereference at virtual address 00000040
current->tss.cr3 = 00101000, %cr3 = 00101000
*pde = 00000000
Oops: 0000
CPU:    1
EIP:    0010:[<c024877f>]
EFLAGS: 00010046
eax: 00000000   ebx: db222800   ecx: f7ff8960   edx: 00000000
esi: f7fd5000   edi: f7fd51c4   ebp: 00000000   esp: c02e7e14
ds: 0018   es: 0018   ss: 0018
Process swapper (pid: 0, process nr: 0, stackpage=c02e7000)
Stack: f7fd51c4 1b222800 00000000 c011056f c0240fe3 f7fe8c00 00000000 
00000000 
       00000086 00000000 00000286 c009ee00 00000004 c0248c06 f7fd5000 
00000001 
       db222800 00000000 00000000 f7fd5000 0000000a 00000004 00000246 
00000001 
Call Trace: [<c011056f>] [<c0240fe3>] [<c0248c06>] [<c010bb79>] [<c0247e1e>] 
[<c010b9e9>] [<c0249ebf>] 
       [<c0114c0a>] [<c011056f>] [<c010b9e9>] [<c0114e44>] [<c010a58f>] 
[<c011ac71>] [<c010bb79>] [<c010bb90>] 
       [<c0110fbe>] [<c010a5e8>] [<c0107af9>] [<c0106000>] [<c01001ae>] 
Code: 8a 45 40 8d 14 80 8d 14 d0 8d 54 96 7c 89 54 24 2c 8b 44 24 
Aiee, killing interrupt handler
Kernel panic: Attempted to kill the idle task!
In swapper task - not syncing


Dave Seff
Systems Administrator
Bloomberg Financial Markets
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: kernel panic

[Dong Liu]

ralf@uni-koblenz.de writes:
 > On Thu, Apr 02, 1998 at 02:22:46PM -0500, Dong Liu wrote:
 > 
 > > ralf@uni-koblenz.de writes:
 > >  > 
 > >  > Surprise, the support for the serial console does not compile :-)
 > > 
 > > I know, but look at drivers/char/console.c, you don't need
 > > CONFIG_SERIAL_CONSOLE to be defined, it will always call
 > > rs_cons_hook() if CONFIG_SGI or CONFIG_SUN_SERIAL is set, and
 > > in arch/mips/sgi/setup.c serial_console is set if
 > > prom_getenv("console") returns "d" or "d2".
 > > 
 > > Maybe it should be changed to be use CONFIG_SUN_SERIAL and implement 
 > > function serial_console_init().
 > 
 > For shure not CONFIG_STUN_SERIAL :-)
 > 
Sorry, I meant CONFIG_SERIAL_CONSOLE, victim of emacs' dabbrev-expand :=).

Dong

Re: kernel panic

[ralf]

On Thu, Apr 02, 1998 at 02:22:46PM -0500, Dong Liu wrote:

> ralf@uni-koblenz.de writes:
>  > 
>  > Surprise, the support for the serial console does not compile :-)
> 
> I know, but look at drivers/char/console.c, you don't need
> CONFIG_SERIAL_CONSOLE to be defined, it will always call
> rs_cons_hook() if CONFIG_SGI or CONFIG_SUN_SERIAL is set, and
> in arch/mips/sgi/setup.c serial_console is set if
> prom_getenv("console") returns "d" or "d2".
> 
> Maybe it should be changed to be use CONFIG_SUN_SERIAL and implement 
> function serial_console_init().

For shure not CONFIG_STUN_SERIAL :-)

  Ralf

Re: kernel panic

[Dong Liu]

ralf@uni-koblenz.de writes:
 > 
 > Surprise, the support for the serial console does not compile :-)

I know, but look at drivers/char/console.c, you don't need
CONFIG_SERIAL_CONSOLE to be defined, it will always call
rs_cons_hook() if CONFIG_SGI or CONFIG_SUN_SERIAL is set, and
in arch/mips/sgi/setup.c serial_console is set if
prom_getenv("console") returns "d" or "d2".

Maybe it should be changed to be use CONFIG_SUN_SERIAL and implement 
function serial_console_init().

Dong

kernel panic

[Dong Liu]

Ulf Carlsson writes:
 > Hello again... we're updating the internet connection to my mail server so
 > I can't read what you've written today. But I've downloaded patch-3 of the
 > sgi-kernel. I get further, but it still doesn't work.. well, I think it's
 > almost fixed now. Here's the output:
 > 
 > IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.3
 > Partition check:
 >  sda: sda1 sda2 sda3 sda4
 >  sdb: sdb1 sdb2 sdb3
 > VFS: Mounted root (ext2 filesystem) readonly.
 > Warning: unable to open an initial console.
 > Got vced at 8801a2a4.
 > Kernel panic: Caught VCE exception - should not happen
 > 

Same here, only difference is I'm using nfsroot.

Good work! Now only I can find a serial cable for this damn Indy:=).

Dong

Re: kernel panic

[ralf]

On Thu, Apr 02, 1998 at 01:55:41PM -0500, Dong Liu wrote:

> Ulf Carlsson writes:
>  > Hello again... we're updating the internet connection to my mail server so
>  > I can't read what you've written today. But I've downloaded patch-3 of the
>  > sgi-kernel. I get further, but it still doesn't work.. well, I think it's
>  > almost fixed now. Here's the output:
>  > 
>  > IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.3
>  > Partition check:
>  >  sda: sda1 sda2 sda3 sda4
>  >  sdb: sdb1 sdb2 sdb3
>  > VFS: Mounted root (ext2 filesystem) readonly.
>  > Warning: unable to open an initial console.
>  > Got vced at 8801a2a4.
>  > Kernel panic: Caught VCE exception - should not happen
>  > 
> 
> Same here, only difference is I'm using nfsroot.
> 
> Good work! Now only I can find a serial cable for this damn Indy:=).

Surprise, the support for the serial console does not compile :-)

  Ralf

kernel panic

[Ulf Carlsson]

Hello again... we're updating the internet connection to my mail server so
I can't read what you've written today. But I've downloaded patch-3 of the
sgi-kernel. I get further, but it still doesn't work.. well, I think it's
almost fixed now. Here's the output:

IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.3
Partition check:
 sda: sda1 sda2 sda3 sda4
 sdb: sdb1 sdb2 sdb3
VFS: Mounted root (ext2 filesystem) readonly.
Warning: unable to open an initial console.
Got vced at 8801a2a4.
Kernel panic: Caught VCE exception - should not happen

That's the end of it.. tell me if you need some info above those lines..
Can it be my partition which is screwed? I reinstalled sgi-linux two days ago...

We're atleast getting somewhere! Great work :-)

- Ulf

Re: kernel panic

[ralf]

On Thu, Apr 02, 1998 at 07:31:00PM +0200, Ulf Carlsson wrote:

> IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.3
> Partition check:
>  sda: sda1 sda2 sda3 sda4
>  sdb: sdb1 sdb2 sdb3
> VFS: Mounted root (ext2 filesystem) readonly.
> Warning: unable to open an initial console.
> Got vced at 8801a2a4.
> Kernel panic: Caught VCE exception - should not happen
> 
> That's the end of it.. tell me if you need some info above those lines..
> Can it be my partition which is screwed? I reinstalled sgi-linux two days ago...

No.  Your report indicates that my last two fixes seem to work.
Now we've got problem #3 in the MC/SC support to fix and I think I've got
an idea what's wrong.  Again I'll go for an simple fix because I don't have
SC CPUs at hand but we're definately on the right way.

  Ralf