* [U-Boot] AT91: working port for Atmels AT91SAM9XE-EK (should be good for )G20 and 9260, too)
@ 2010-11-16 9:15 Reinhard Meyer
0 siblings, 0 replies; only message in thread
From: Reinhard Meyer @ 2010-11-16 9:15 UTC (permalink / raw)
To: u-boot
In line with the at91/avr32 rework efforts, I have made the board
AT91SAM9XE-EK build and work again.
Note however that I could not test all functions of the board thoroughly.
MMC with the generic driver is working, note that dataflash and mmc are
mutually exclusive on those evaluation boards.
If you want to try the build, you can find it at top of the rework tree
in u-boot-atmel.git, at91avr32rework-5 branch.
Note also that you need the initial bootstrap loader recompiled to load
the image to 0x20000000, OR (not recommended) change the
CONFIG_SYS_TEXTBASE back to 0x23f00000 which is 1 Meg. below end of SDRAM
and therefore a bit close to the relocated u-boot image.
Reinhard
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-11-16 9:15 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-11-16 9:15 [U-Boot] AT91: working port for Atmels AT91SAM9XE-EK (should be good for )G20 and 9260, too) Reinhard Meyer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.