[lm-sensors] sensors.conf for GigaByte GA-790XTA-UD4

* [lm-sensors] sensors.conf for GigaByte GA-790XTA-UD4
@ 2010-11-18 23:37 Ancoron Luciferis
  2010-11-19  0:08 ` Ancoron Luciferis
  2010-11-26  8:18 ` Hans de Goede
  0 siblings, 2 replies; 3+ messages in thread
From: Ancoron Luciferis @ 2010-11-18 23:37 UTC (permalink / raw)
  To: lm-sensors

[-- Attachment #1: Type: text/plain, Size: 1388 bytes --]

Hi *,

I just want to share the configuration that works nicely for the
mentioned motherboard:

# dmidecode 2.9
SMBIOS 2.4 present.

Handle 0x0001, DMI type 1, 27 bytes
System Information
        Manufacturer: Gigabyte Technology Co., Ltd.
        Product Name: GA-790XTA-UD4
        Version:
        Serial Number:
        UUID: 36434630-3439-3533-3433-3734FFFFFFFF
        Wake-up Type: Power Switch
        SKU Number:
        Family:

The sensors.conf file is attached.

Here is some sample output:

it8720-isa-0228
Adapter: ISA adapter
Vcore:           +1.20 V  (min =  +0.78 V, max =  +1.50 V)
Vdram:           +1.49 V  (min =  +1.42 V, max =  +1.57 V)
+3.3V:           +3.34 V  (min =  +3.14 V, max =  +3.47 V)
+5V:             +5.11 V  (min =  +4.76 V, max =  +5.24 V)
+12V:           +11.92 V  (min = +11.41 V, max = +12.62 V)
5VSB:            +5.08 V  (min =  +4.76 V, max =  +5.24 V)
Vbat:            +3.26 V
CPU Fan:         690 RPM  (min =  300 RPM)
SYS Fan 2:       873 RPM  (min =  300 RPM)
SYS Temp:        +43.0°C  (low  =  +0.0°C, high = +50.0°C)  sensor =
thermistor
CPU Casing Temp: +27.0°C  (low  =  +0.0°C, high = +65.0°C)  sensor =
thermal diode
NB Temp:         +37.0°C  (low  =  +0.0°C, high = +55.0°C)  sensor =
thermistor

Please feel free to upload this to the available configurations.

Cheers,

	Ancoron

[-- Attachment #2: GA-790XTA-UD4-sensors.conf --]
[-- Type: text/plain, Size: 1929 bytes --]

chip "it8720-isa-*"
### Voltages

   # in5 is mysterious.

   label  in0  "Vcore"
   label  in1  "Vdram"   # "DDR3" in BIOS
   label  in2  "+3.3V"
   label  in3  "+5V"     # Not in BIOS
   label  in4  "+12V"
   ignore in5
   ignore in6
   label  in7  "5VSB"    # Not in BIOS
   label  in8  "Vbat"    # Not in BIOS
   ignore cpu0_vid

   # Vcore, Vdram, +3.3V and Vbat are connected directly, so no compute
   # line is needed for these. +5V and 5VSB are internal so we use the
   # standard scaling factor. Scaling for +12V is apparently not standard,
   # factor 3.963 is guessed from BIOS and EasyTune values (3.943 was
   # another candidate.)
   compute  in3  @ * (6.8/10+1), @ / (6.8/10+1)
   compute  in4  @ * 3.963,      @ / 3.963
   compute  in7  @ * (6.8/10+1), @ / (6.8/10+1)

   # The BIOS won't set any limit for voltages.

   set in0_min  0.825 * 0.95
   set in0_max  1.425 * 1.05
   set in1_min  1.5   * 0.95
   set in1_max  1.5   * 1.05
   set in2_min  3.3   * 0.95
   set in2_max  3.3   * 1.05
   set in3_min  5     * 0.95
   set in3_max  5     * 1.05
   set in4_min 12     * 0.95
   set in4_max 12     * 1.05
   set in7_min  5     * 0.95
   set in7_max  5     * 1.05

### Temperatures

   # The BIOS only shows 2 temperature values, so temp1 and temp3
   # might not be actually both used, and I don't know which one
   # is reported by the BIOS as the system temperature.

   label temp1 "SYS Temp"
   set   temp1_min 0
   set   temp1_max 50 # Tropical ambient max plus a bit

   label temp2  "CPU Casing Temp"
   set   temp2_min 0
   set   temp2_max 65 # BIOS "CPU Warning Temperature" - 5

   label temp3 "NB Temp"
   set   temp3_min 0
   set   temp3_max 55 # BIOS "CPU Warning Temperature" - 15

### Fans

   label fan1 "CPU Fan"
   ignore fan2
   label fan3 "SYS Fan 2"
   # ignore fan4 # doesn't exist on GA-790XTA-UD4
   ignore fan5

   # Adjust for your own fans
   set fan1_min 300
   set fan3_min 300

[-- Attachment #3: Type: text/plain, Size: 153 bytes --]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

^ permalink raw reply	[flat|nested] 3+ messages in thread