* Re: [Xen-users] Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
[not found] ` <4D0B7E79.4010106@wavecon.de>
@ 2010-12-20 20:18 ` Pasi Kärkkäinen
2010-12-20 20:20 ` Arno Toell
2010-12-21 13:13 ` Re: [Xen-users] " Ian Campbell
0 siblings, 2 replies; 14+ messages in thread
From: Pasi Kärkkäinen @ 2010-12-20 20:18 UTC (permalink / raw)
To: Arno Toell; +Cc: xen-devel, xen-users
Adding xen-devel as CC .. crash backtrace in the end of the mail below.
-- Pasi
On Fri, Dec 17, 2010 at 04:15:05PM +0100, Arno Toell wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 17.12.2010 12:51, Pasi Kärkkäinen wrote:
> > "console=hvc0 earlyprintk=xen initcall_debug debug loglevel=10"
>
> Here we go:
>
> serial output:
> > (XEN) Xen version 4.0.1 (Debian 4.0.1-1) (waldi@debian.org) (gcc version 4.4.5 20100824 (prerelease) (Debian 4.4.4-11) ) Fri Sep 3 15:38:12 UTC 2010
> > (XEN) Bootloader: GRUB 1.98+20100804-10
> > (XEN) Command line: console=com2
> > (XEN) Video information:
> > (XEN) VGA is text mode 80x25, font 8x16
> > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
> > (XEN) EDID info not retrieved because no DDC retrieval method detected
> > (XEN) Disc information:
> > (XEN) Found 1 MBR signatures
> > (XEN) Found 1 EDD information structures
> > (XEN) Xen-e820 RAM map:
> > (XEN) 0000000000000000 - 00000000000a0000 (usable)
> > (XEN) 0000000000100000 - 000000007f679000 (usable)
> > (XEN) 000000007f679000 - 000000007f68f000 (reserved)
> > (XEN) 000000007f68f000 - 000000007f6ce000 (ACPI data)
> > (XEN) 000000007f6ce000 - 0000000080000000 (reserved)
> > (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
> > (XEN) 00000000fe000000 - 0000000100000000 (reserved)
> > (XEN) 0000000100000000 - 0000000c80000000 (usable)
> > (XEN) ACPI: RSDP 000F0A90, 0024 (r2 DELL )
> > (XEN) ACPI: XSDT 000F0B94, 009C (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: FACP 7F6B3F9C, 00F4 (r3 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: DSDT 7F68F000, 3D5A (r1 DELL PE_SC3 1 INTL 20050624)
> > (XEN) ACPI: FACS 7F6B6000, 0040
> > (XEN) ACPI: APIC 7F6B3478, 015E (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: SPCR 7F6B35D8, 0050 (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: HPET 7F6B362C, 0038 (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: DMAR 7F6B3668, 01C0 (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: MCFG 7F6B38C4, 003C (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: WD__ 7F6B3904, 0134 (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: SLIC 7F6B3A3C, 0024 (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: ERST 7F692EDC, 0270 (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: HEST 7F69314C, 03A8 (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: BERT 7F692D5C, 0030 (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: EINJ 7F692D8C, 0150 (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: SRAT 7F6B3BC0, 0370 (r1 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: TCPA 7F6B3F34, 0064 (r2 DELL PE_SC3 1 DELL 1)
> > (XEN) ACPI: SSDT 7F6B7000, 43F4 (r1 INTEL PPM RCM 80000001 INTL 20061109)
> > (XEN) System RAM: 49142MB (50321508kB)
> > (XEN) Domain heap initialised DMA width 32 bits
> > (XEN) Processor #16 7:10 APIC version 21
> > (XEN) Processor #0 7:10 APIC version 21
> > (XEN) Processor #18 7:10 APIC version 21
> > (XEN) Processor #2 7:10 APIC version 21
> > (XEN) Processor #20 7:10 APIC version 21
> > (XEN) Processor #4 7:10 APIC version 21
> > (XEN) Processor #22 7:10 APIC version 21
> > (XEN) Processor #6 7:10 APIC version 21
> > (XEN) Processor #17 7:10 APIC version 21
> > (XEN) Processor #1 7:10 APIC version 21
> > (XEN) Processor #19 7:10 APIC version 21
> > (XEN) Processor #3 7:10 APIC version 21
> > (XEN) Processor #21 7:10 APIC version 21
> > (XEN) Processor #5 7:10 APIC version 21
> > (XEN) Processor #23 7:10 APIC version 21
> > (XEN) Processor #7 7:10 APIC version 21
> > (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
> > (XEN) IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
> > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
> > (XEN) Using scheduler: SMP Credit Scheduler (credit)
> > (XEN) Detected 2394.064 MHz processor.
> > (XEN) Initing memory sharing.
> > (XEN) VMX: Supported advanced features:
> > (XEN) - APIC MMIO access virtualisation
> > (XEN) - APIC TPR shadow
> > (XEN) - Extended Page Tables (EPT)
> > (XEN) - Virtual-Processor Identifiers (VPID)
> > (XEN) - Virtual NMI
> > (XEN) - MSR direct-access bitmap
> > (XEN) EPT supports 2MB super page.
> > (XEN) HVM: ASIDs enabled.
> > (XEN) HVM: VMX enabled
> > (XEN) HVM: Hardware Assisted Paging detected.
> > (XEN) Intel VT-d Snoop Control supported.
> > (XEN) Intel VT-d DMA Passthrough not supported.
> > (XEN) Intel VT-d Queued Invalidation supported.
> > (XEN) Intel VT-d Interrupt Remapping supported.
> > (XEN) I/O virtualisation enabled
> > (XEN) - Dom0 mode: Relaxed
> > (XEN) Total of 16 processors activated.
> > (XEN) ENABLING IO-APIC IRQs
> > (XEN) -> Using new ACK method
> > (XEN) TSC is reliable, synchronization unnecessary
> > (XEN) Platform timer is 14.318MHz HPET
> > ?(XEN) Allocated console ring of 32 KiB.
> > (XEN) Brought up 16 CPUs
> > (XEN) *** LOADING DOMAIN 0 ***
> > (XEN) Xen kernel: 64-bit, lsb, compat32
> > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16b6000
> > (XEN) PHYSICAL MEMORY ARRANGEMENT:
> > (XEN) Dom0 alloc.: 0000000c50000000->0000000c60000000 (12345334 pages to be allocated)
> > (XEN) VIRTUAL MEMORY ARRANGEMENT:
> > (XEN) Loaded kernel: ffffffff81000000->ffffffff816b6000
> > (XEN) Init. ramdisk: ffffffff816b6000->ffffffff83064200
> > (XEN) Phys-Mach map: ffffffff83065000->ffffffff88f14fb0
> > (XEN) Start info: ffffffff88f15000->ffffffff88f154b4
> > (XEN) Page tables: ffffffff88f16000->ffffffff88f61000
> > (XEN) Boot stack: ffffffff88f61000->ffffffff88f62000
> > (XEN) TOTAL: ffffffff80000000->ffffffff89000000
> > (XEN) ENTRY ADDRESS: ffffffff81506200
> > (XEN) Dom0 has maximum 16 VCPUs
> > (XEN) Scrubbing Free RAM: done.
> > (XEN) Xen trace buffers: disabled
> > (XEN) Std. Loglevel: Errors and warnings
> > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
> > (XEN) Freed 176kB init memory.
> > mapping kernel into physical memory
> > Xen: setup ISA identity maps
> > about to get started...
> > [ 0.000000] Initializing cgroup subsys cpuset
> > [ 0.000000] Initializing cgroup subsys cpu
> > [ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-29) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 17:41:50 UT0
> > [ 0.000000] Command line: placeholder root=UUID=4346c332-863c-4482-b9a1-f3d45dffc1e7 ro console=ttyS1 console=hvc0 earlyprintk=xen initcall_debug debug l0
> > [ 0.000000] KERNEL supported cpus:
> > [ 0.000000] Intel GenuineIntel
> > [ 0.000000] AMD AuthenticAMD
> > [ 0.000000] Centaur CentaurHauls
> > [ 0.000000] xen_release_chunk: looking at area pfn 80000-e0000: 393216 pages freed
> > [ 0.000000] xen_release_chunk: looking at area pfn f0000-fe000: 57344 pages freed
> > [ 0.000000] xen_release_chunk: looking at area pfn 800000-bd5ff6: 0 pages freed
> > [ 0.000000] released 450560 pages of unused memory
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
> > [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
> > [ 0.000000] Xen: 0000000000100000 - 000000007f679000 (usable)
> > [ 0.000000] Xen: 000000007f679000 - 000000007f68f000 (reserved)
> > [ 0.000000] Xen: 000000007f68f000 - 000000007f6ce000 (ACPI data)
> > [ 0.000000] Xen: 000000007f6ce000 - 0000000080000000 (reserved)
> > [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
> > [ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved)
> > [ 0.000000] Xen: 0000000100000000 - 0000000800000000 (usable)
> > [ 0.000000] bootconsole [xenboot0] enabled
> > [ 0.000000] DMI 2.6 present.
> > [ 0.000000] last_pfn = 0x800000 max_arch_pfn = 0x400000000
> > [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
> > [ 0.000000] last_pfn = 0x7f679 max_arch_pfn = 0x400000000
> > [ 0.000000] initial memory mapped : 0 - 20000000
> > [ 0.000000] init_memory_mapping: 0000000000000000-000000007f679000
> > [ 0.000000] 0000000000 - 007f679000 page 4k
> > [ 0.000000] kernel direct mapping tables up to 7f679000 @ 100000-4ff000
> > [ 0.000000] init_memory_mapping: 0000000100000000-0000000800000000
> > [ 0.000000] 0100000000 - 0800000000 page 4k
> > [ 0.000000] kernel direct mapping tables up to 800000000 @ 8f61000-cf82000
> > [ 0.000000] RAMDISK: 016b6000 - 03064200
> > [ 0.000000] ACPI: RSDP 00000000000f0a90 00024 (v02 DELL )
> > [ 0.000000] ACPI: XSDT 00000000000f0b94 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: FACP 000000007f6b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: DSDT 000000007f68f000 03D5A (v01 DELL PE_SC3 00000001 INTL 20050624)
> > [ 0.000000] ACPI: FACS 000000007f6b6000 00040
> > [ 0.000000] ACPI: APIC 000000007f6b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: SPCR 000000007f6b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: HPET 000000007f6b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: XMAR 000000007f6b3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: MCFG 000000007f6b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: WD__ 000000007f6b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: SLIC 000000007f6b3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: ERST 000000007f692edc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: HEST 000000007f69314c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: BERT 000000007f692d5c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: EINJ 000000007f692d8c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: SRAT 000000007f6b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: TCPA 000000007f6b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
> > [ 0.000000] ACPI: SSDT 000000007f6b7000 043F4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] No NUMA configuration found
> > [ 0.000000] Faking a node at 0000000000000000-0000000800000000
> > [ 0.000000] Bootmem setup node 0 0000000000000000-0000000800000000
> > [ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
> > [ 0.000000] bootmap [00000000004b1000 - 00000000005b0fff] pages 100
> > [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0800000000]
> > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> > [ 0.000000] #1 [0008f16000 - 0008f61000] XEN PAGETABLES ==> [0008f16000 - 0008f61000]
> > [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> > [ 0.000000] #3 [0001000000 - 0001695994] TEXT DATA BSS ==> [0001000000 - 0001695994]
> > [ 0.000000] #4 [00016b6000 - 0003064200] RAMDISK ==> [00016b6000 - 0003064200]
> > [ 0.000000] #5 [0003065000 - 0008f16000] XEN START INFO ==> [0003065000 - 0008f16000]
> > [ 0.000000] #6 [0001696000 - 00016964fd] BRK ==> [0001696000 - 00016964fd]
> > [ 0.000000] #7 [0000100000 - 00004b1000] PGTABLE ==> [0000100000 - 00004b1000]
> > [ 0.000000] #8 [0008f61000 - 000c77d000] PGTABLE ==> [0008f61000 - 000c77d000]
> > [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
> > [ 0.000000] Zone PFN ranges:
> > [ 0.000000] DMA 0x00000000 -> 0x00001000
> > [ 0.000000] DMA32 0x00001000 -> 0x00100000
> > [ 0.000000] Normal 0x00100000 -> 0x00800000
> > [ 0.000000] Movable zone start PFN for each node
> > [ 0.000000] early_node_map[3] active PFN ranges
> > [ 0.000000] 0: 0x00000000 -> 0x000000a0
> > [ 0.000000] 0: 0x00000100 -> 0x0007f679
> > [ 0.000000] 0: 0x00100000 -> 0x00800000
> > [ 0.000000] On node 0 totalpages: 7861785
> > [ 0.000000] DMA zone: 56 pages used for memmap
> > [ 0.000000] DMA zone: 948 pages reserved
> > [ 0.000000] DMA zone: 2996 pages, LIFO batch:0
> > [ 0.000000] DMA32 zone: 14280 pages used for memmap
> > [ 0.000000] DMA32 zone: 503473 pages, LIFO batch:31
> > [ 0.000000] Normal zone: 100352 pages used for memmap
> > [ 0.000000] Normal zone: 7239680 pages, LIFO batch:31
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x07] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> > [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-0
> > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
> > [ 0.000000] IOAPIC[1]: apic_id 1, version 0, address 0xfec80000, GSI 32-32
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
> > [ 0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs
> > [ 0.000000] nr_irqs_gsi: 288
> > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
> > [ 0.000000] PM: Registered nosave memory: 000000007f679000 - 000000007f68f000
> > [ 0.000000] PM: Registered nosave memory: 000000007f68f000 - 000000007f6ce000
> > [ 0.000000] PM: Registered nosave memory: 000000007f6ce000 - 0000000080000000
> > [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
> > [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
> > [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
> > [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
> > [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
> > [ 0.000000] Booting paravirtualized kernel on Xen
> > [ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
> > [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
> > [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88002804f000 s90328 r8192 d24360 u122880
> > [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
> > [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
> > [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
> > [ 6.121891] trying to map vcpu_info 0 at ffff88002805a020, mfn 81805a, offset 32
> > [ 6.121896] cpu 0 using vcpu_info at ffff88002805a020
> > [ 6.121899] trying to map vcpu_info 1 at ffff880028078020, mfn 818078, offset 32
> > [ 6.121902] cpu 1 using vcpu_info at ffff880028078020
> > [ 6.121905] trying to map vcpu_info 2 at ffff880028096020, mfn 818096, offset 32
> > [ 6.121908] cpu 2 using vcpu_info at ffff880028096020
> > [ 6.121910] trying to map vcpu_info 3 at ffff8800280b4020, mfn 8180b4, offset 32
> > [ 6.121914] cpu 3 using vcpu_info at ffff8800280b4020
> > [ 6.121916] trying to map vcpu_info 4 at ffff8800280d2020, mfn 8180d2, offset 32
> > [ 6.121919] cpu 4 using vcpu_info at ffff8800280d2020
> > [ 6.121921] trying to map vcpu_info 5 at ffff8800280f0020, mfn 8180f0, offset 32
> > [ 6.121925] cpu 5 using vcpu_info at ffff8800280f0020
> > [ 6.121927] trying to map vcpu_info 6 at ffff88002810e020, mfn 81810e, offset 32
> > [ 6.121930] cpu 6 using vcpu_info at ffff88002810e020
> > [ 6.121932] trying to map vcpu_info 7 at ffff88002812c020, mfn 81812c, offset 32
> > [ 6.121936] cpu 7 using vcpu_info at ffff88002812c020
> > [ 6.121938] trying to map vcpu_info 8 at ffff88002814a020, mfn 81814a, offset 32
> > [ 6.121941] cpu 8 using vcpu_info at ffff88002814a020
> > [ 6.121943] trying to map vcpu_info 9 at ffff880028168020, mfn 818168, offset 32
> > [ 6.121947] cpu 9 using vcpu_info at ffff880028168020
> > [ 6.121949] trying to map vcpu_info 10 at ffff880028186020, mfn 818186, offset 32
> > [ 6.121952] cpu 10 using vcpu_info at ffff880028186020
> > [ 6.121955] trying to map vcpu_info 11 at ffff8800281a4020, mfn 8181a4, offset 32
> > [ 6.121958] cpu 11 using vcpu_info at ffff8800281a4020
> > [ 6.121960] trying to map vcpu_info 12 at ffff8800281c2020, mfn 8181c2, offset 32
> > [ 6.121963] cpu 12 using vcpu_info at ffff8800281c2020
> > [ 6.121965] trying to map vcpu_info 13 at ffff8800281e0020, mfn 8181e0, offset 32
> > [ 6.121969] cpu 13 using vcpu_info at ffff8800281e0020
> > [ 6.121971] trying to map vcpu_info 14 at ffff8800281fe020, mfn 8181fe, offset 32
> > [ 6.121974] cpu 14 using vcpu_info at ffff8800281fe020
> > [ 6.121976] trying to map vcpu_info 15 at ffff88002821c020, mfn 81821c, offset 32
> > [ 6.121980] cpu 15 using vcpu_info at ffff88002821c020
> > [ 6.121981] Xen: using vcpu_info placement
> > [ 6.121987] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 7746149
> > [ 6.121990] Policy zone: Normal
> > [ 6.121992] Kernel command line: placeholder root=UUID=4346c332-863c-4482-b9a1-f3d45dffc1e7 ro console=ttyS1 console=hvc0 earlyprintk=xen initcall_debug 0
> > [ 6.122041] PID hash table entries: 4096 (order: 3, 32768 bytes)
> > [ 6.122370] Initializing CPU#0
> > [ 6.131080] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
> > [ 6.131087] DMA: software IO TLB at phys 0x20000000 - 0x24000000
> > [ 6.131090] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
> > [ 6.139836] Kernel panic - not syncing: DMA(-12): Failed to exchange pages allocated for DMA with Xen! We either don't have the permission or you do not !
> > [ 6.139838]
> > [ 6.139845] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1
> > [ 6.139847] Call Trace:
> > [ 6.139856] [<ffffffff8130a9fa>] ? panic+0x86/0x143
> > [ 6.139862] [<ffffffff8100ecdf>] ? xen_restore_fl_direct_end+0x0/0x1
> > [ 6.139867] [<ffffffff8130c8b2>] ? _spin_unlock_irqrestore+0xd/0xe
> > [ 6.139871] [<ffffffff8100d5e5>] ? xen_create_contiguous_region+0xc8/0xe1
> > [ 6.139878] [<ffffffff8119d4ba>] ? xen_swiotlb_fixup+0x8b/0xba
> > [ 6.139882] [<ffffffff813129f3>] ? _etext+0x0/0x1f360d
> > [ 6.139887] [<ffffffff8152b430>] ? xen_swiotlb_init+0x5c/0x5f
> > [ 6.139891] [<ffffffff81509fbb>] ? pci_xen_swiotlb_init+0x17/0x24
> > [ 6.139895] [<ffffffff8150ce7f>] ? pci_iommu_alloc+0x72/0x78
> > [ 6.139900] [<ffffffff8151b14c>] ? mem_init+0x15/0xe5
> > [ 6.139904] [<ffffffff81506af7>] ? start_kernel+0x202/0x3e8
> > [ 6.139908] [<ffffffff81508c87>] ? xen_start_kernel+0x586/0x58a
> > (XEN) Domain 0 crashed: rebooting machine in 5 seconds.
> >
>
> Let me know whether I can assist you further to dig the issue.
>
>
> - --
> mit freundlichen Grüßen,
> Arno Töll, BSc.
> GnuPG Key-ID: 0x8408D4C4
>
> Wavecon GmbH | Frankenstrasse 9 | 90762 Fuerth
> Web: wavecon.de | Mail + Jabber at@wavecon.de
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.10 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iEYEARECAAYFAk0LfngACgkQBWM6U4QI1MQ/0wCg4IqwpEujT1c4oEjAF8OAFaGw
> n8sAn2trqcuosxDHJaFOG7YoloYlpHTT
> =rdOx
> -----END PGP SIGNATURE-----
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2010-12-20 20:18 ` [Xen-users] Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic Pasi Kärkkäinen
@ 2010-12-20 20:20 ` Arno Toell
2010-12-21 13:13 ` Re: [Xen-users] " Ian Campbell
1 sibling, 0 replies; 14+ messages in thread
From: Arno Toell @ 2010-12-20 20:20 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: xen-devel, xen-users
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 20.12.2010 21:18, Pasi Kärkkäinen wrote:
>
> Adding xen-devel as CC .. crash backtrace in the end of the mail below.
For reference: I created bug #1698 related to this issue. See
http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1698
- --
mit freundlichen Grüßen,
Arno Töll, BSc.
GnuPG Key-ID: 0x8408D4C4
Wavecon GmbH | Frankenstrasse 9 | 90762 Fuerth
Web: wavecon.de | Mail + Jabber at@wavecon.de
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk0Pun4ACgkQBWM6U4QI1MTLvgCg2wpNssQtfydup5mrzdKZ9LOW
OHMAn1X9MnEapZAsLwkhLmXFlxeTk6zl
=i4ja
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: [Xen-users] Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2010-12-20 20:18 ` [Xen-users] Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic Pasi Kärkkäinen
2010-12-20 20:20 ` Arno Toell
@ 2010-12-21 13:13 ` Ian Campbell
2010-12-23 11:13 ` [Xen-devel] " Arno Toell
` (2 more replies)
1 sibling, 3 replies; 14+ messages in thread
From: Ian Campbell @ 2010-12-21 13:13 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: Arno Toell, xen-devel, xen-users
On Mon, 2010-12-20 at 20:18 +0000, Pasi Kärkkäinen wrote:
> > > [ 6.122370] Initializing CPU#0
> > > [ 6.131080] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
> > > [ 6.131087] DMA: software IO TLB at phys 0x20000000 - 0x24000000
> > > [ 6.131090] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
> > > [ 6.139836] Kernel panic - not syncing: DMA(-12): Failed to exchange pages allocated for DMA with Xen! We either don't have the permission or you do not !
This suggests that the xen_exchange_memory hypercall has failed for some
reason.
-12 is -ENOMEM but size is only 64M and this is start of day so I can't
think why this would be the case (or at least why it wouldn't always be
the case if it was happening at all).
Might be worth trying the dom0_mem hypervisor parameter to limit the
initial size of dom0, perhaps to 32G.
Ian.
> > > [ 6.139838]
> > > [ 6.139845] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1
> > > [ 6.139847] Call Trace:
> > > [ 6.139856] [<ffffffff8130a9fa>] ? panic+0x86/0x143
> > > [ 6.139862] [<ffffffff8100ecdf>] ? xen_restore_fl_direct_end+0x0/0x1
> > > [ 6.139867] [<ffffffff8130c8b2>] ? _spin_unlock_irqrestore+0xd/0xe
> > > [ 6.139871] [<ffffffff8100d5e5>] ? xen_create_contiguous_region+0xc8/0xe1
> > > [ 6.139878] [<ffffffff8119d4ba>] ? xen_swiotlb_fixup+0x8b/0xba
> > > [ 6.139882] [<ffffffff813129f3>] ? _etext+0x0/0x1f360d
> > > [ 6.139887] [<ffffffff8152b430>] ? xen_swiotlb_init+0x5c/0x5f
> > > [ 6.139891] [<ffffffff81509fbb>] ? pci_xen_swiotlb_init+0x17/0x24
> > > [ 6.139895] [<ffffffff8150ce7f>] ? pci_iommu_alloc+0x72/0x78
> > > [ 6.139900] [<ffffffff8151b14c>] ? mem_init+0x15/0xe5
> > > [ 6.139904] [<ffffffff81506af7>] ? start_kernel+0x202/0x3e8
> > > [ 6.139908] [<ffffffff81508c87>] ? xen_start_kernel+0x586/0x58a
> > > (XEN) Domain 0 crashed: rebooting machine in 5 seconds.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Xen-devel] Re: Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2010-12-21 13:13 ` Re: [Xen-users] " Ian Campbell
@ 2010-12-23 11:13 ` Arno Toell
2010-12-27 15:28 ` Re: [Xen-users] " Konrad Rzeszutek Wilk
2011-01-05 16:05 ` Arno Toell
2 siblings, 0 replies; 14+ messages in thread
From: Arno Toell @ 2010-12-23 11:13 UTC (permalink / raw)
Cc: xen-devel, xen-users
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 21.12.2010 14:13, Ian Campbell wrote:
> Might be worth trying the dom0_mem hypervisor parameter to limit the
> initial size of dom0, perhaps to 32G.
Following Ians suggestion I will summarize again, what I've written in
the bug report.
Passing dom0_mem=max:4GB to the hypervisor works around the issue. That
is, the dom0 with underlying hypervisor does boot. Please see
http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1698#c4 for a
full dmesg/xm info output.
The relevant part is:
node_to_cpu : node0:0,2,4,6,8,10,12,14
node1:1,3,5,7,9,11,13,15
node_to_memory : node0:21765
node1:24425
node_to_dma32_mem : node0:0
node1:1969
Moreover my company is willing to pay anyone who fixes this bug a
symbolic fee of 1000 EUR as thank-you for letting us making use of Xen;
either personally to the contributor or to a (non-profit) organization
of the contributor's choice.
- --
mit freundlichen Grüßen,
Arno Töll, BSc.
GnuPG Key-ID: 0x8408D4C4
Wavecon GmbH | Frankenstrasse 9 | 90762 Fuerth
Web: wavecon.de | Mail + Jabber at@wavecon.de
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk0TLtYACgkQBWM6U4QI1MTMPwCg1x3YaBWRgoEiB9SU24AvM2Ze
N2kAoJWUP7KLX5zWDQ+RtYRoD7xjVVR3
=7heG
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: [Xen-users] Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2010-12-21 13:13 ` Re: [Xen-users] " Ian Campbell
2010-12-23 11:13 ` [Xen-devel] " Arno Toell
@ 2010-12-27 15:28 ` Konrad Rzeszutek Wilk
2011-01-05 10:58 ` [Xen-devel] " Pasi Kärkkäinen
2011-01-05 16:05 ` Arno Toell
2 siblings, 1 reply; 14+ messages in thread
From: Konrad Rzeszutek Wilk @ 2010-12-27 15:28 UTC (permalink / raw)
To: Ian Campbell; +Cc: Arno Toell, xen-devel, xen-users
On Tue, Dec 21, 2010 at 01:13:29PM +0000, Ian Campbell wrote:
> On Mon, 2010-12-20 at 20:18 +0000, Pasi Kärkkäinen wrote:
> > > > [ 6.122370] Initializing CPU#0
> > > > [ 6.131080] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
> > > > [ 6.131087] DMA: software IO TLB at phys 0x20000000 - 0x24000000
> > > > [ 6.131090] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
> > > > [ 6.139836] Kernel panic - not syncing: DMA(-12): Failed to exchange pages allocated for DMA with Xen! We either don't have the permission or you do not !
>
> This suggests that the xen_exchange_memory hypercall has failed for some
> reason.
>
> -12 is -ENOMEM but size is only 64M and this is start of day so I can't
> think why this would be the case (or at least why it wouldn't always be
> the case if it was happening at all).
>
> Might be worth trying the dom0_mem hypervisor parameter to limit the
> initial size of dom0, perhaps to 32G.
His 'node_to_dma32' ended being 0 and 62 respectivly. Not enough to allocate
the 64MB SWIOTLB buffer. Isn't there some logic in the Xen hypervisor to
leave some swath of memory for DMA32?
>
> Ian.
>
> > > > [ 6.139838]
> > > > [ 6.139845] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1
> > > > [ 6.139847] Call Trace:
> > > > [ 6.139856] [<ffffffff8130a9fa>] ? panic+0x86/0x143
> > > > [ 6.139862] [<ffffffff8100ecdf>] ? xen_restore_fl_direct_end+0x0/0x1
> > > > [ 6.139867] [<ffffffff8130c8b2>] ? _spin_unlock_irqrestore+0xd/0xe
> > > > [ 6.139871] [<ffffffff8100d5e5>] ? xen_create_contiguous_region+0xc8/0xe1
> > > > [ 6.139878] [<ffffffff8119d4ba>] ? xen_swiotlb_fixup+0x8b/0xba
> > > > [ 6.139882] [<ffffffff813129f3>] ? _etext+0x0/0x1f360d
> > > > [ 6.139887] [<ffffffff8152b430>] ? xen_swiotlb_init+0x5c/0x5f
> > > > [ 6.139891] [<ffffffff81509fbb>] ? pci_xen_swiotlb_init+0x17/0x24
> > > > [ 6.139895] [<ffffffff8150ce7f>] ? pci_iommu_alloc+0x72/0x78
> > > > [ 6.139900] [<ffffffff8151b14c>] ? mem_init+0x15/0xe5
> > > > [ 6.139904] [<ffffffff81506af7>] ? start_kernel+0x202/0x3e8
> > > > [ 6.139908] [<ffffffff81508c87>] ? xen_start_kernel+0x586/0x58a
> > > > (XEN) Domain 0 crashed: rebooting machine in 5 seconds.
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Xen-devel] Re: Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2010-12-27 15:28 ` Re: [Xen-users] " Konrad Rzeszutek Wilk
@ 2011-01-05 10:58 ` Pasi Kärkkäinen
0 siblings, 0 replies; 14+ messages in thread
From: Pasi Kärkkäinen @ 2011-01-05 10:58 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Arno Toell, xen-devel, Ian Campbell, xen-users
On Mon, Dec 27, 2010 at 10:28:12AM -0500, Konrad Rzeszutek Wilk wrote:
> On Tue, Dec 21, 2010 at 01:13:29PM +0000, Ian Campbell wrote:
> > On Mon, 2010-12-20 at 20:18 +0000, Pasi Kärkkäinen wrote:
> > > > > [ 6.122370] Initializing CPU#0
> > > > > [ 6.131080] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
> > > > > [ 6.131087] DMA: software IO TLB at phys 0x20000000 - 0x24000000
> > > > > [ 6.131090] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
> > > > > [ 6.139836] Kernel panic - not syncing: DMA(-12): Failed to exchange pages allocated for DMA with Xen! We either don't have the permission or you do not !
> >
> > This suggests that the xen_exchange_memory hypercall has failed for some
> > reason.
> >
> > -12 is -ENOMEM but size is only 64M and this is start of day so I can't
> > think why this would be the case (or at least why it wouldn't always be
> > the case if it was happening at all).
> >
> > Might be worth trying the dom0_mem hypervisor parameter to limit the
> > initial size of dom0, perhaps to 32G.
>
> His 'node_to_dma32' ended being 0 and 62 respectivly. Not enough to allocate
> the 64MB SWIOTLB buffer. Isn't there some logic in the Xen hypervisor to
> leave some swath of memory for DMA32?
>
Hmm.. iirc there was some discussions (and patches maybe?) related to Xen dma32
reservations some time ago..
-- Pasi
> >
> > Ian.
> >
> > > > > [ 6.139838]
> > > > > [ 6.139845] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1
> > > > > [ 6.139847] Call Trace:
> > > > > [ 6.139856] [<ffffffff8130a9fa>] ? panic+0x86/0x143
> > > > > [ 6.139862] [<ffffffff8100ecdf>] ? xen_restore_fl_direct_end+0x0/0x1
> > > > > [ 6.139867] [<ffffffff8130c8b2>] ? _spin_unlock_irqrestore+0xd/0xe
> > > > > [ 6.139871] [<ffffffff8100d5e5>] ? xen_create_contiguous_region+0xc8/0xe1
> > > > > [ 6.139878] [<ffffffff8119d4ba>] ? xen_swiotlb_fixup+0x8b/0xba
> > > > > [ 6.139882] [<ffffffff813129f3>] ? _etext+0x0/0x1f360d
> > > > > [ 6.139887] [<ffffffff8152b430>] ? xen_swiotlb_init+0x5c/0x5f
> > > > > [ 6.139891] [<ffffffff81509fbb>] ? pci_xen_swiotlb_init+0x17/0x24
> > > > > [ 6.139895] [<ffffffff8150ce7f>] ? pci_iommu_alloc+0x72/0x78
> > > > > [ 6.139900] [<ffffffff8151b14c>] ? mem_init+0x15/0xe5
> > > > > [ 6.139904] [<ffffffff81506af7>] ? start_kernel+0x202/0x3e8
> > > > > [ 6.139908] [<ffffffff81508c87>] ? xen_start_kernel+0x586/0x58a
> > > > > (XEN) Domain 0 crashed: rebooting machine in 5 seconds.
> >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Xen-devel] Re: Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2010-12-21 13:13 ` Re: [Xen-users] " Ian Campbell
2010-12-23 11:13 ` [Xen-devel] " Arno Toell
2010-12-27 15:28 ` Re: [Xen-users] " Konrad Rzeszutek Wilk
@ 2011-01-05 16:05 ` Arno Toell
2011-01-05 16:16 ` Re: [Xen-users] " Ian Campbell
2011-01-11 16:38 ` Konrad Rzeszutek Wilk
2 siblings, 2 replies; 14+ messages in thread
From: Arno Toell @ 2011-01-05 16:05 UTC (permalink / raw)
To: Ian Campbell; +Cc: xen-devel, xen-users, Pasi Kärkkäinen
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
> This suggests that the xen_exchange_memory hypercall has failed for some
> reason.
>
> -12 is -ENOMEM but size is only 64M and this is start of day so I can't
> think why this would be the case (or at least why it wouldn't always be
> the case if it was happening at all).
I was speaking earlier today to Pasi about this bug again by accident.
There he asked whether I did try to boot the xen-4.0-testing tree. Now I
did, as I built the most recent -testing snapshot and I have some more
to add:
Booting the Xen hypervisor in version 4.0.2-rc1-pre built by myself on
the affected system resulted in no failure for Debian's stock
2.6.32-5-xen-amd64 kernel. Jeremy's xen tree at
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git (resulting
in 2.6.32.27) failed to boot, but that is my fault as I was too lazy to
build an appropriate .config. So this is NOT related to the bug.
So the question is now, whether there was a bug in 4.0.1 that has been
fixed in -testing which fixes this one as well (or if it is a duplicate
perhaps?), or if Debian introduced that bug. Would someone mind finding
this out together with me?
Serial output is now:
__ __ _ _ ___ ____ _
\ \/ /___ _ __ | || | / _ \ |___ \ _ __ ___/ | _ __ _ __ ___
\ // _ \ '_ \ | || |_| | | | __) |__| '__/ __| |__| '_ \| '__/ _ \
/ \ __/ | | | |__ _| |_| | / __/|__| | | (__| |__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)___(_)_____| |_| \___|_| | .__/|_| \___|
|_|
(XEN) Xen version 4.0.2-rc1-pre (root@c1.wavecon.info) (gcc version
4.4.5 (Debian 4.4.5-8) ) Wed Jan 5 08:31:44 EST 2011
(XEN) Latest ChangeSet: Fri Dec 24 10:29:50 2010 +0000
21422:714d808e57bb
(XEN) Bootloader: GRUB 1.98+20100804-10
(XEN) Command line: placeholder console=com2
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 0000000000100000 - 000000007f679000 (usable)
(XEN) 000000007f679000 - 000000007f68f000 (reserved)
(XEN) 000000007f68f000 - 000000007f6ce000 (ACPI data)
(XEN) 000000007f6ce000 - 0000000080000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fe000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000c80000000 (usable)
(XEN) ACPI: RSDP 000F0A90, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000F0B94, 009C (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: FACP 7F6B3F9C, 00F4 (r3 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: DSDT 7F68F000, 3D5A (r1 DELL PE_SC3 1 INTL
20050624)
(XEN) ACPI: FACS 7F6B6000, 0040
(XEN) ACPI: APIC 7F6B3478, 015E (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: SPCR 7F6B35D8, 0050 (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: HPET 7F6B362C, 0038 (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: DMAR 7F6B3668, 01C0 (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: MCFG 7F6B38C4, 003C (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: WD__ 7F6B3904, 0134 (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: SLIC 7F6B3A3C, 0024 (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: ERST 7F692EDC, 0270 (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: HEST 7F69314C, 03A8 (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: BERT 7F692D5C, 0030 (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: EINJ 7F692D8C, 0150 (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: SRAT 7F6B3BC0, 0370 (r1 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: TCPA 7F6B3F34, 0064 (r2 DELL PE_SC3 1 DELL
1)
(XEN) ACPI: SSDT 7F6B7000, 43F4 (r1 INTEL PPM RCM 80000001 INTL
20061109)
(XEN) System RAM: 49142MB (50321508kB)
(XEN) Domain heap initialised DMA width 32 bits
(XEN) Processor #16 7:10 APIC version 21
(XEN) Processor #0 7:10 APIC version 21
(XEN) Processor #18 7:10 APIC version 21
(XEN) Processor #2 7:10 APIC version 21
(XEN) Processor #20 7:10 APIC version 21
(XEN) Processor #4 7:10 APIC version 21
(XEN) Processor #22 7:10 APIC version 21
(XEN) Processor #6 7:10 APIC version 21
(XEN) Processor #17 7:10 APIC version 21
(XEN) Processor #1 7:10 APIC version 21
(XEN) Processor #19 7:10 APIC version 21
(XEN) Processor #3 7:10 APIC version 21
(XEN) Processor #21 7:10 APIC version 21
(XEN) Processor #5 7:10 APIC version 21
(XEN) Processor #23 7:10 APIC version 21
(XEN) Processor #7 7:10 APIC version 21
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
(XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2394.088 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) EPT supports 2MB super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Total of 16 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) TSC is reliable, synchronization unnecessary
(XEN) Platform timer is 14.318MHz HPET
�(XEN) Allocated console ring of 32 KiB.
(XEN) Brought up 16 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16b6000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000c50000000->0000000c60000000 (12319770 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff816b6000
(XEN) Init. ramdisk: ffffffff816b6000->ffffffff83064200
(XEN) Phys-Mach map: ffffffff83065000->ffffffff88ee30d0
(XEN) Start info: ffffffff88ee4000->ffffffff88ee44b4
(XEN) Page tables: ffffffff88ee5000->ffffffff88f30000
(XEN) Boot stack: ffffffff88f30000->ffffffff88f31000
(XEN) TOTAL: ffffffff80000000->ffffffff89000000
(XEN) ENTRY ADDRESS: ffffffff81506200
(XEN) Dom0 has maximum 16 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 176kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-29)
(ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri
Dec 10 17:41:50 UT0
[ 0.000000] Command line: placeholder
root=UUID=488ac918-6644-46f9-bc1b-4e7d5918a47f ro console=ttyS1
console=hvc0 earlyprintk=xen initcall_debug debug lo
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn 80000-e0000:
393216 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn f0000-fe000: 57344
pages freed
[ 0.000000] xen_release_chunk: looking at area pfn 800000-bcfc1a: 0
pages freed
[ 0.000000] released 450560 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 000000007f679000 (usable)
[ 0.000000] Xen: 000000007f679000 - 000000007f68f000 (reserved)
[ 0.000000] Xen: 000000007f68f000 - 000000007f6ce000 (ACPI data)
[ 0.000000] Xen: 000000007f6ce000 - 0000000080000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 0000000800000000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x800000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new
0x7010600070106
[ 0.000000] last_pfn = 0x7f679 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f679000
[ 0.000000] 0000000000 - 007f679000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f679000 @
100000-4ff000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000800000000
[ 0.000000] 0100000000 - 0800000000 page 4k
[ 0.000000] kernel direct mapping tables up to 800000000 @
8f30000-cf51000
[ 0.000000] RAMDISK: 016b6000 - 03064200
[ 0.000000] ACPI: RSDP 00000000000f0a90 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f0b94 0009C (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 000000007f6b3f9c 000F4 (v03 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 000000007f68f000 03D5A (v01 DELL PE_SC3
00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 000000007f6b6000 00040
[ 0.000000] ACPI: APIC 000000007f6b3478 0015E (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 000000007f6b35d8 00050 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 000000007f6b362c 00038 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: XMAR 000000007f6b3668 001C0 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 000000007f6b38c4 0003C (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 000000007f6b3904 00134 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 000000007f6b3a3c 00024 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 000000007f692edc 00270 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 000000007f69314c 003A8 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 000000007f692d5c 00030 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 000000007f692d8c 00150 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 000000007f6b3bc0 00370 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 000000007f6b3f34 00064 (v02 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 000000007f6b7000 043F4 (v01 INTEL PPM RCM
80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000800000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000800000000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
[ 0.000000] bootmap [00000000004b1000 - 00000000005b0fff] pages
100
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 -
0800000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0008ee5000 - 0008f30000] XEN PAGETABLES ==>
[0008ee5000 - 0008f30000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001695994] TEXT DATA BSS ==>
[0001000000 - 0001695994]
[ 0.000000] #4 [00016b6000 - 0003064200] RAMDISK ==>
[00016b6000 - 0003064200]
[ 0.000000] #5 [0003065000 - 0008ee5000] XEN START INFO ==>
[0003065000 - 0008ee5000]
[ 0.000000] #6 [0001696000 - 00016964fd] BRK ==>
[0001696000 - 00016964fd]
[ 0.000000] #7 [0000100000 - 00004b1000] PGTABLE ==>
[0000100000 - 00004b1000]
[ 0.000000] #8 [0008f30000 - 000c74c000] PGTABLE ==>
[0008f30000 - 000c74c000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00800000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0007f679
[ 0.000000] 0: 0x00100000 -> 0x00800000
[ 0.000000] On node 0 totalpages: 7861785
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 948 pages reserved
[ 0.000000] DMA zone: 2996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 503473 pages, LIFO batch:31
[ 0.000000] Normal zone: 100352 pages used for memmap
[ 0.000000] Normal zone: 7239680 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI
0-0
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 0, address 0xfec80000, GSI
32-32
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 288
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007f679000 -
000000007f68f000
[ 0.000000] PM: Registered nosave memory: 000000007f68f000 -
000000007f6ce000
[ 0.000000] PM: Registered nosave memory: 000000007f6ce000 -
0000000080000000
[ 0.000000] PM: Registered nosave memory: 0000000080000000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.2-rc1-pre (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88002804f000 s90328
r8192 d24360 u122880
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0]
06 [0] 07
[ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0]
14 [0] 15
[ 6.923660] trying to map vcpu_info 0 at ffff88002805a020, mfn
81805a, offset 32
[ 6.923665] cpu 0 using vcpu_info at ffff88002805a020
[ 6.923667] trying to map vcpu_info 1 at ffff880028078020, mfn
818078, offset 32
[ 6.923671] cpu 1 using vcpu_info at ffff880028078020
[ 6.923673] trying to map vcpu_info 2 at ffff880028096020, mfn
818096, offset 32
[ 6.923676] cpu 2 using vcpu_info at ffff880028096020
[ 6.923678] trying to map vcpu_info 3 at ffff8800280b4020, mfn
8180b4, offset 32
[ 6.923682] cpu 3 using vcpu_info at ffff8800280b4020
[ 6.923684] trying to map vcpu_info 4 at ffff8800280d2020, mfn
8180d2, offset 32
[ 6.923687] cpu 4 using vcpu_info at ffff8800280d2020
[ 6.923690] trying to map vcpu_info 5 at ffff8800280f0020, mfn
8180f0, offset 32
[ 6.923693] cpu 5 using vcpu_info at ffff8800280f0020
[ 6.923695] trying to map vcpu_info 6 at ffff88002810e020, mfn
81810e, offset 32
[ 6.923698] cpu 6 using vcpu_info at ffff88002810e020
[ 6.923701] trying to map vcpu_info 7 at ffff88002812c020, mfn
81812c, offset 32
[ 6.923704] cpu 7 using vcpu_info at ffff88002812c020
[ 6.923706] trying to map vcpu_info 8 at ffff88002814a020, mfn
81814a, offset 32
[ 6.923709] cpu 8 using vcpu_info at ffff88002814a020
[ 6.923712] trying to map vcpu_info 9 at ffff880028168020, mfn
818168, offset 32
[ 6.923715] cpu 9 using vcpu_info at ffff880028168020
[ 6.923717] trying to map vcpu_info 10 at ffff880028186020, mfn
818186, offset 32
[ 6.923720] cpu 10 using vcpu_info at ffff880028186020
[ 6.923723] trying to map vcpu_info 11 at ffff8800281a4020, mfn
8181a4, offset 32
[ 6.923726] cpu 11 using vcpu_info at ffff8800281a4020
[ 6.923728] trying to map vcpu_info 12 at ffff8800281c2020, mfn
8181c2, offset 32
[ 6.923731] cpu 12 using vcpu_info at ffff8800281c2020
[ 6.923734] trying to map vcpu_info 13 at ffff8800281e0020, mfn
8181e0, offset 32
[ 6.923737] cpu 13 using vcpu_info at ffff8800281e0020
[ 6.923739] trying to map vcpu_info 14 at ffff8800281fe020, mfn
8181fe, offset 32
[ 6.923742] cpu 14 using vcpu_info at ffff8800281fe020
[ 6.923745] trying to map vcpu_info 15 at ffff88002821c020, mfn
81821c, offset 32
[ 6.923748] cpu 15 using vcpu_info at ffff88002821c020
[ 6.923750] Xen: using vcpu_info placement
[ 6.923755] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 7746149
[ 6.923758] Policy zone: Normal
[ 6.923761] Kernel command line: placeholder
root=UUID=488ac918-6644-46f9-bc1b-4e7d5918a47f ro console=ttyS1
console=hvc0 earlyprintk=xen initcall_debug o
[ 6.923811] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 6.924136] Initializing CPU#0
[ 6.932756] DMA: Placing 64MB software IO TLB between
ffff880020000000 - ffff880024000000
[ 6.932764] DMA: software IO TLB at phys 0x20000000 - 0x24000000
[ 6.932767] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864
[ 6.951766] xen_swiotlb_fixup: buf=ffff880024060000 size=32768
[ 7.076245] Memory: 30756556k/33554432k available (3146k kernel code,
2107292k absent, 690584k reserved, 1901k data, 600k init)
[ 7.076285] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=16, Nodes=1
[ 7.076341] Hierarchical RCU implementation.
[ 7.076355] NR_IRQS:4352 nr_irqs:4352
[ 7.076472] xen: --> irq=0
[ 7.076483] xen: --> irq=1
[ 7.076491] xen: --> irq=2
[ 7.076499] xen: --> irq=3
[ 7.076507] xen: --> irq=4
[ 7.076515] xen: --> irq=5
[ 7.076522] xen: --> irq=6
[ 7.076530] xen: --> irq=7
[ 7.076538] xen: --> irq=8
[ 7.076545] xen: --> irq=9
[ 7.076553] xen: --> irq=10
[ 7.076561] xen: --> irq=11
[ 7.076569] xen: --> irq=12
[ 7.076577] xen: --> irq=13
[ 7.076584] xen: --> irq=14
[ 7.076592] xen: --> irq=15
[ 7.076609] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 7.076612] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 7.076615] xen: sci override: source_irq=9 global_irq=9 trigger=c
polarity=1
[ 7.076618] xen: registering gsi 9 triggering 0 polarity 0
[ 7.076620] xen_allocate_pirq: returning irq 9 for gsi 9
[ 7.076622] xen: --> irq=9
[ 7.076656] xen: acpi sci 9
[ 7.082825] Console: colour VGA+ 80x25
[ 7.082829] console [hvc0] enabled, bootconsole disabled
[ 7.082829] console [hvc0] enabled, bootconsole disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-29)
(ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri
Dec 10 17:41:50 UT0
[ 0.000000] Command line: placeholder
root=UUID=488ac918-6644-46f9-bc1b-4e7d5918a47f ro console=ttyS1
console=hvc0 earlyprintk=xen initcall_debug debug lo
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn 80000-e0000:
393216 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn f0000-fe000: 57344
pages freed
[ 0.000000] xen_release_chunk: looking at area pfn 800000-bcfc1a: 0
pages freed
[ 0.000000] released 450560 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 000000007f679000 (usable)
[ 0.000000] Xen: 000000007f679000 - 000000007f68f000 (reserved)
[ 0.000000] Xen: 000000007f68f000 - 000000007f6ce000 (ACPI data)
[ 0.000000] Xen: 000000007f6ce000 - 0000000080000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 0000000800000000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x800000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new
0x7010600070106
[ 0.000000] last_pfn = 0x7f679 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f679000
[ 0.000000] 0000000000 - 007f679000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f679000 @
100000-4ff000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000800000000
[ 0.000000] 0100000000 - 0800000000 page 4k
[ 0.000000] kernel direct mapping tables up to 800000000 @
8f30000-cf51000
[ 0.000000] RAMDISK: 016b6000 - 03064200
[ 0.000000] ACPI: RSDP 00000000000f0a90 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f0b94 0009C (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 000000007f6b3f9c 000F4 (v03 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 000000007f68f000 03D5A (v01 DELL PE_SC3
00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 000000007f6b6000 00040
[ 0.000000] ACPI: APIC 000000007f6b3478 0015E (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 000000007f6b35d8 00050 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 000000007f6b362c 00038 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: XMAR 000000007f6b3668 001C0 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 000000007f6b38c4 0003C (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 000000007f6b3904 00134 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 000000007f6b3a3c 00024 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 000000007f692edc 00270 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 000000007f69314c 003A8 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 000000007f692d5c 00030 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 000000007f692d8c 00150 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 000000007f6b3bc0 00370 (v01 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 000000007f6b3f34 00064 (v02 DELL PE_SC3
00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 000000007f6b7000 043F4 (v01 INTEL PPM RCM
80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000800000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000800000000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
[ 0.000000] bootmap [00000000004b1000 - 00000000005b0fff] pages
100
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 -
0800000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0008ee5000 - 0008f30000] XEN PAGETABLES ==>
[0008ee5000 - 0008f30000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001695994] TEXT DATA BSS ==>
[0001000000 - 0001695994]
[ 0.000000] #4 [00016b6000 - 0003064200] RAMDISK ==>
[00016b6000 - 0003064200]
[ 0.000000] #5 [0003065000 - 0008ee5000] XEN START INFO ==>
[0003065000 - 0008ee5000]
[ 0.000000] #6 [0001696000 - 00016964fd] BRK ==>
[0001696000 - 00016964fd]
[ 0.000000] #7 [0000100000 - 00004b1000] PGTABLE ==>
[0000100000 - 00004b1000]
[ 0.000000] #8 [0008f30000 - 000c74c000] PGTABLE ==>
[0008f30000 - 000c74c000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00800000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0007f679
[ 0.000000] 0: 0x00100000 -> 0x00800000
[ 0.000000] On node 0 totalpages: 7861785
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 948 pages reserved
[ 0.000000] DMA zone: 2996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 503473 pages, LIFO batch:31
[ 0.000000] Normal zone: 100352 pages used for memmap
[ 0.000000] Normal zone: 7239680 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI
0-0
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 0, address 0xfec80000, GSI
32-32
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs
[ 0.0[ 7.806935] scsi 0:2:0:0: Direct-Access DELL PERC
H700 2.30 PQ: 0 ANSI: 5
[ 7.810109] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.810271] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002
[ 7.810419] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.810576] usb usb3: Product: EHCI Host Controller
[ 7.810685] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
[ 7.810826] usb usb3: SerialNumber: 0000:00:1d.7
[ 7.810996] usb usb3: configuration #1 chosen from 1 choice
[ 7.811153] hub 3-0:1.0: USB hub found
[ 7.811253] hub 3-0:1.0: 4 ports detected
[ 7.811404] initcall ehci_hcd_init+0x0/0x7c [ehci_hcd] returned 0
after 202824 usecs
[ 7.811408] xen: registering gsi 18 triggering 0 polarity 1
[ 7.811418] alloc irq_desc for 18 on node -1
[ 7.811420] alloc kstat_irqs on node -1
[ 7.811423] xen: --> irq=18
[ 7.811452] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low)
- -> IRQ 18
[ 7.811461] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 7.811464] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.811473] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 7.811555] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
[ 7.811610] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
[ 7.811612] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.811613] usb usb4: Product: UHCI Host Controller
[ 7.811615] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 7.811616] usb usb4: SerialNumber: 0000:00:1a.1
[ 7.811670] usb usb4: configuration #1 chosen from 1 choice
[ 7.811695] hub 4-0:1.0: USB hub found
[ 7.811707] hub 4-0:1.0: 2 ports detected
[ 7.811754] xen: registering gsi 21 triggering 0 polarity 1
[ 7.811756] xen_allocate_pirq: returning irq 21 for gsi 21
[ 7.811757] xen: --> irq=21
[ 7.811761] Already setup the GSI :21
[ 7.811763] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low)
- -> IRQ 21
[ 7.811771] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.811774] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.811782] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 5
[ 7.811812] uhci_hcd 7.811863] usb usb5: New USB device found,
idVendor=1d6b, idProduct=0001
[ 7.811865] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.811866] usb usb5: Product: UHCI Host Controller
[ 7.811868] usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 7.811869] usb usb5: SerialNumber: 0000:00:1d.0
[ 7.811919] usb usb5: configuration #1 chosen from 1 choice
[ 7.811941] hub 5-0:1.0: USB hub found
[ 7.811953] hub 5-0:1.0: 2 ports detected
[ 7.812031] xen: registering gsi 20 triggering 0 polarity 1
[ 7.812039] alloc irq_desc for 20 on node -1
[ 7.812040] alloc kstat_irqs on node -1
[ 7.812043] xen: --> irq=20
[ 7.812071] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low)
- -> IRQ 20
[ 7.812079] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.812083] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.812091] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 6
[ 7.812171] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
[ 7.812223] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0001
[ 7.812225] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.812227] usb usb6: Product: UHCI Host Controller
[ 7.812228] usb usb6: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd
[ 7.812230] usb usb6: SerialNumber: 0000:00:1d.1
[ 7.812282] usb usb6: configuration #1 chosen from 1 choice
[ 7.812304] hub 6-0:1.0: USB hub found
[ 7.812316] hub 6-0:1.0: 2 ports detected
[ 7.812374] initcall uhci_hcd_init+0x0/0xbb [uhci_hcd] returned 0
after 201098 usecs
[ 7.818906] calling enclosure_init+0x0/0x13 [enclosure] @ 394
[ 7.819052] initcall enclosure_init+0x0/0x13 [enclosure] returned 0
after 12 usecs
[ 7.942611] usb 1-3: new high speed USB device using ehci_hcd and
address 2
[ 8.073426] usb 1-3: New USB device found, idVendor=0424,
idProduct=2514
[ 8.073596] usb 1-3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 8.073804] usb 1-3: configuration #1 chosen from 1 choice
[ 8.074092] hub 1-3:1.0: USB hub found
[ 8.074300] hub 1-3:1.0: 3 ports detected
[ 8.265170] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.290526] ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
[ 8.305404] ata1.00: configured for UDMA/100
[ 8.316726] scsi 1:0:0:0: CD-ROM TEAC DVD-ROM DV-28SW
R.2A PQ: 0 ANSI: 5
[ 8.545103] usb 5-2: new full speed USB device using uhci_hcd and
address 2
[ 8.712878] usb 5-2: New USB device found, idVendor=0624,
idProduct=0248
[ 8.713042] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 8.713198] usb 5-2: Product: USB Composite Device-0
[ 8.713307] usb 5-2: Manufacturer: Avocent
[ 8.713397] usb 5-2: SerialNumber: 20080519
[ 8.713554] usb 5-2: configuration #1 chosen from 1 choice
[ 8.817107] ata2: failed to resume link (SControl 0)
[ 8.828433] ata2: SATA link down (SStatus 4 SControl 0)
[ 8.829523] calling ses_init+0x0/0x35 [ses] @ 394
[ 8.832761] calling init_sd+0x0/0x16b [sd_mod] @ 395
[ 8.833072] sd 0:2:0:0: [sda] 4683988992 512-byte logical blocks:
(2.39 TB/2.18 TiB)
[ 8.833103] initcall init_sd+0x0/0x16b [sd_mod] returned 0 after 211
usecs
[ 8.833497] sd 0:2:0:0: [sda] Write Protect is off
[ 8.833613] sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
[ 8.833789] sd 0:2:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 8.833874] calling ata_generic_init+0x0/0x1a [ata_generic] @ 320
[ 8.833901] initcall ata_generic_init+0x0/0x1a [ata_generic] returned
0 after 22 usecs
[ 8.834583] sda:calling hid_init+0x0/0x5c [hid] @ 411
[ 8.838023] initcall hid_init+0x0/0x5c [hid] returned 0 after 30
usecs
[ 8.840124] calling hid_init+0x0/0xc7 [usbhid] @ 412
[ 8.840313] usbcore: registered new interface driver hiddev
[ 8.845103] input: Avocent USB Composite Device-0 as
/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1
[ 8.845379] generic-usb 0003:0624:0248.0001: input,hidraw0: USB HID
v1.00 Keyboard [Avocent USB Composite Device-0] on
usb-0000:00:1d.0-2/input0
[ 8.849044] input: Avocent USB Composite Device-0 as
/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input2
[ 8.849358] generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID
v1.00 Mouse [Avocent USB Composite Device-0] on
usb-0000:00:1d.0-2/input1
[ 8.849651] usbcore: registered new interface driver usbhid
[ 8.849774] usbhid: v2.6:USB HID core driver
[ 8.849874] initcall hid_init+0x0/0xc7 [usbhid] returned 0 after 9406
usecs
[ 8.867328] sda1 sda2
[ 8.867814] sd 0:2:0:0: [sda] Attached SCSI disk
[ 8.872371] calling cdrom_init+0x0/0x6a [cdrom] @ 418
[ 8.872517] initcall cdrom_init+0x0/0x6a [cdrom] returned 0 after 25
usecs
[ 8.874563] calling init_sr+0x0/0x3f [sr_mod] @ 418
[ 8.896171] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 8.896318] Uniform CD-ROM driver Revision: 3.20
[ 8.896499] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.896616] initcall init_sr+0x0/0x3f [sr_mod] returned 0 after 21422
usecs
[ 8.900380] calling init_sg+0x0/0xc1 [sg] @ 424
[ 9.029141] ses 0:0:32:0: Attached Enclosure device
[ 9.029179] ses 0:0:32:0: Attached scsi generic sg0 type 13
[ 9.029207] sd 0:2:0:0: Attached scsi generic sg1 type 0
[ 9.029232] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 9.029237] initcall init_sg+0x0/0xc1 [sg] returned 0 after 125731
usecs
[ 9.029794] initcall ses_init+0x0/0x35 [ses] returned 0 after 195464
usecs
[ 9.114842] calling wait_scan_init+0x0/0xd [scsi_wait_scan] @ 429
[ 9.114983] initcall wait_scan_init+0x0/0xd [scsi_wait_scan] returned
0 after 0 usecs
[ 9.172718] PM: Starting manual resume from disk
[ 9.172825] PM: Resume from partition 8:2
[ 9.172914] PM: Checking hibernation image.
[ 9.173223] PM: Error -22 checking image file
[ 9.173331] PM: Resume from disk failed.
[ 9.176511] calling init_mbcache+0x0/0x14 [mbcache] @ 459
[ 9.176637] initcall init_mbcache+0x0/0x14 [mbcache] returned 0 after
0 usecs
[ 9.178972] calling journal_init+0x0/0x89 [jbd] @ 459
[ 9.179216] initcall journal_init+0x0/0x89 [jbd] returned 0 after 122
usecs
[ 9.183388] calling init_ext3_fs+0x0/0x67 [ext3] @ 459
[ 9.183571] initcall init_ext3_fs+0x0/0x67 [ext3] returned 0 after 59
usecs
[ 9.190925] kjournald starting. Commit interval 5 seconds
[ 9.190934] EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 9.959461] udev[507]:
starting version 164
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 10.101284] calling
xen_acpi_processor_extcntl_init+0x0/0x4a [acpi_processor] @ 524
[ 10.101475] initcall xen_acpi_processor_extcntl_init+0x0/0x4a
[acpi_processor] returned 0 after 0 usecs
[ 10.114955] calling acpi_power_meter_init+0x0/0x35 [power_meter] @
582
[ 10.115618] ACPI Error: SMBus or IPMI write requires Buffer of length
42, found length 20 (20090903/exfield-286)
[ 10.115862] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PMI0._GHL] (Node ffff8807ffc38c20), AE_AML_BUFFER_LIMIT
[ 10.116150] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PMI0._PMC] (Node ffff8807ffc38ba0), AE_AML_BUFFER_LIMIT
[ 10.116438] ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC
(20090903/power_meter-772)
[ 10.116670] initcall acpi_power_meter_init+0x0/0x35 [power_meter]
returned 0 after 1523 usecs
[ 10.152619] calling acpi_processor_init+0x0/0x12f [processor] @ 537
[ 10.153521] calling evdev_init+0x0/0xc [evdev] @ 670
[ 10.153732] initcall evdev_init+0x0/0xc [evdev] returned 0 after 91
usecs
[ 10.157383] calling serio_raw_init+0x0/0x1a [serio_raw] @ 644
[ 10.157541] initcall serio_raw_init+0x0/0x1a [serio_raw] returned 0
after 22 usecs
[ 10.158249] calling dcdbas_init+0x0/0x5d [dcdbas] @ 659
[ 10.158258] initcall acpi_processor_init+0x0/0x12f [processor]
returned 0 after 5337 usecs
[ 10.158598] calling pcspkr_init+0x0/0xc [pcspkr] @ 641
[ 10.158641] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 10.158647] initcall dcdbas_init+0x0/0x5d [dcdbas] returned 0 after
59 usecs
[ 10.159119] input: PC Speaker as
/devices/platform/pcspkr/input/input3
[ 10.159317] initcall pcspkr_init+0x0/0xc [pcspkr] returned 0 after
239 usecs
[ 10.159793] calling acpi_button_init+0x0/0x57 [button] @ 573
[ 10.160079] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 10.160324] ACPI: Power Button [PWRF]
[ 10.160460] initcall acpi_button_init+0x0/0x57 [button] returned 0
after 491 usecs
[ 10.162935] calling joydev_init+0x0/0xc [joydev] @ 671
[ 10.163097] initcall joydev_init+0x0/0xc [joydev] returned 0 after 40
usecs
[ 10.303146] calling psmouse_init+0x0/0x6b [psmouse] @ 645
[ 10.303364] initcall psmouse_init+0x0/0x6b [psmouse] returned 0 after
68 usecs
[ 10.370828] calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 641
[ 10.370978] initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned
0 after 5 usecs
[ 10.375157] calling init_soundcore+0x0/0x9a [soundcore] @ 641
[ 10.375307] initcall init_soundcore+0x0/0x9a [soundcore] returned 0
after 17 usecs
[ 10.389947] calling alsa_sound_init+0x0/0x87 [snd] @ 641
[ 10.390090] initcall alsa_sound_init+0x0/0x87 [snd] returned 0 after
16 usecs
[ 10.506774] calling alsa_timer_init+0x0/0x169 [snd_timer] @ 641
[ 10.506976] initcall alsa_timer_init+0x0/0x169 [snd_timer] returned 0
after 54 usecs
[ 10.515813] calling alsa_pcm_init+0x0/0x67 [snd_pcm] @ 641
[ 10.515946] initcall alsa_pcm_init+0x0/0x67 [snd_pcm] returned 0
after 3 usecs
[ 10.522768] calling pcsp_init+0x0/0x1b [snd_pcsp] @ 641
[ 10.522892] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.523035] initcall pcsp_init+0x0/0x1b [snd_pcsp] returned -16 after
139 usecs
[ 10.523195] initcall pcsp_init+0x0/0x1b [snd_pcsp] returned with
error code -16
done.
Setting preliminary keymap...done.
Activating swap...[ 10.853970] Adding 46874992k swap on /dev/sda2.
Priority:-1 extents:1 across:46874992k
done.
Checking root file system...fsck from util-linux-ng 2.17.2
/dev/sda1: clean, 113482/3540208 files, 974477/14160156 blocks
done.
[ 10.958775] EXT3 FS on sda1, internal journal
Cleaning up ifupdown....
[ 11.030255] calling loop_init+0x0/0x19e [loop] @ 832
[ 11.031004] loop: module loaded
[ 11.031107] initcall loop_init+0x0/0x19e [loop] returned 0 after 709
usecs
Loading kernel modules...done.
Setting up networking....
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.17.2
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Setting kernel variables ...done.
Configuring network interfaces...[ 11.526815] alloc irq_desc for
4260 on node -1
[ 11.526927] alloc kstat_irqs on node -1
[ 11.527115] alloc irq_desc for 4259 on node -1
[ 11.527217] alloc kstat_irqs on node -1
[ 11.527376] alloc irq_desc for 4258 on node -1
[ 11.527477] alloc kstat_irqs on node -1
[ 11.527636] alloc irq_desc for 4257 on node -1
[ 11.527738] alloc kstat_irqs on node -1
[ 11.527896] alloc irq_desc for 4256 on node -1
[ 11.527997] alloc kstat_irqs on node -1
[ 11.528156] alloc irq_desc for 4255 on node -1
[ 11.528258] alloc kstat_irqs on node -1
[ 11.528417] alloc irq_desc for 4254 on node -1
[ 11.528519] alloc kstat_irqs on node -1
[ 11.528678] alloc irq_desc for 4253 on node -1
[ 11.528779] alloc kstat_irqs on node -1
[ 11.528938] alloc irq_desc for 4252 on node -1
[ 11.529039] alloc kstat_irqs on node -1
[ 11.588647] bnx2: eth0: using MSIX
[ 11.590192] ADDRCONF(NETDEV_UP): eth0: link is not ready
done.
Starting portmap daemon....
...
- --
mit freundlichen Grüßen,
Arno Töll, BSc.
GnuPG Key-ID: 0x8408D4C4
Wavecon GmbH | Frankenstrasse 9 | 90762 Fuerth
Web: wavecon.de | Mail + Jabber at@wavecon.de
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/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=OT05
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: [Xen-users] Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2011-01-05 16:05 ` Arno Toell
@ 2011-01-05 16:16 ` Ian Campbell
2011-01-11 16:38 ` Konrad Rzeszutek Wilk
1 sibling, 0 replies; 14+ messages in thread
From: Ian Campbell @ 2011-01-05 16:16 UTC (permalink / raw)
To: Arno Toell; +Cc: xen-devel, xen-users
On Wed, 2011-01-05 at 16:05 +0000, Arno Toell wrote:
> So the question is now, whether there was a bug in 4.0.1 that has been
> fixed in -testing which fixes this one as well (or if it is a duplicate
> perhaps?), or if Debian introduced that bug. Would someone mind finding
> this out together with me?
As far as I can tell Debian does not patch the hypervisor at all, it is
just stock 4.0.1.
That makes it seem likely that the issue is fixed in xen-4.0-testing.hg
and will be in the 4.0.2 release.
If you wanted to figure out which changeset then you could bisect the
hypervisor changes between the RELEASE-4.0.1 tag in xen-4.0-testing.hg
and the version you tested which was ok.
Ian.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: [Xen-users] Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2011-01-05 16:05 ` Arno Toell
2011-01-05 16:16 ` Re: [Xen-users] " Ian Campbell
@ 2011-01-11 16:38 ` Konrad Rzeszutek Wilk
2011-01-11 17:03 ` [Xen-devel] " Arno Toell
1 sibling, 1 reply; 14+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-01-11 16:38 UTC (permalink / raw)
To: Arno Toell; +Cc: xen-devel, Ian Campbell, xen-users
On Wed, Jan 05, 2011 at 05:05:50PM +0100, Arno Toell wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> > This suggests that the xen_exchange_memory hypercall has failed for some
> > reason.
> >
> > -12 is -ENOMEM but size is only 64M and this is start of day so I can't
> > think why this would be the case (or at least why it wouldn't always be
> > the case if it was happening at all).
>
> I was speaking earlier today to Pasi about this bug again by accident.
> There he asked whether I did try to boot the xen-4.0-testing tree. Now I
> did, as I built the most recent -testing snapshot and I have some more
> to add:
>
> Booting the Xen hypervisor in version 4.0.2-rc1-pre built by myself on
> the affected system resulted in no failure for Debian's stock
> 2.6.32-5-xen-amd64 kernel. Jeremy's xen tree at
> git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git (resulting
> in 2.6.32.27) failed to boot, but that is my fault as I was too lazy to
> build an appropriate .config. So this is NOT related to the bug.
>
> So the question is now, whether there was a bug in 4.0.1 that has been
> fixed in -testing which fixes this one as well (or if it is a duplicate
There was some fix for the VT-d allocation that ended up crashing Dom0
(b/c of an memory accounting issue).
It could have been that was what you hit. I don't remember the changeset
number, but you could try booting your old hypervisor without the Vt-D
and see if that was it (iommu=off) ?
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Xen-devel] Re: Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2011-01-11 16:38 ` Konrad Rzeszutek Wilk
@ 2011-01-11 17:03 ` Arno Toell
2011-01-11 17:20 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 14+ messages in thread
From: Arno Toell @ 2011-01-11 17:03 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel, Ian Campbell, xen-users
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 11.01.2011 17:38, Konrad Rzeszutek Wilk wrote:
> It could have been that was what you hit. I don't remember the changeset
> number, but you could try booting your old hypervisor without the Vt-D
> and see if that was it (iommu=off) ?
Chances are, as I already mentioned the machine boots fine if I disable
VMX in bios. Booting with "iommu=off" has the same effect.
I skipped through the changelogs recently and found, one (or more) of
the following changesets _should_ fix the issue. I'm lacking any
knowledge about the hypervisor's internal subsystems and code paths
though. So my seeked fix might or might not be within that subset at all.
http://xenbits.xensource.com/xen-4.0-testing.hg?rev/aced00366822
http://xenbits.xensource.com/xen-4.0-testing.hg?rev/c9f461d6ea1d
http://xenbits.xensource.com/xen-4.0-testing.hg?rev/f7d54e1d7044
http://xenbits.xensource.com/xen-4.0-testing.hg?rev/81a636dd784d
http://xenbits.xensource.com/xen-4.0-testing.hg?rev/9c7b9e65bc37
http://xenbits.xensource.com/xen-4.0-testing.hg?rev/ae381a864b4f
http://xenbits.xensource.com/xen-4.0-testing.hg?rev/4e689840622f
As said, I look for the exact fix, to get Debian people a hint about
what to backport for their 4.0.1 soon-to-be-stable package.
- --
mit freundlichen Grüßen,
Arno Töll, BSc.
GnuPG Key-ID: 0x8408D4C4
Wavecon GmbH | Frankenstrasse 9 | 90762 Fuerth
Web: wavecon.de | Mail + Jabber at@wavecon.de
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/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=abEC
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Xen-devel] Re: Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2011-01-11 17:03 ` [Xen-devel] " Arno Toell
@ 2011-01-11 17:20 ` Konrad Rzeszutek Wilk
2011-01-11 18:39 ` andrew thomas
0 siblings, 1 reply; 14+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-01-11 17:20 UTC (permalink / raw)
To: Arno Toell, andrew.thomas; +Cc: xen-devel, Ian Campbell, xen-users
On Tue, Jan 11, 2011 at 06:03:40PM +0100, Arno Toell wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 11.01.2011 17:38, Konrad Rzeszutek Wilk wrote:
> > It could have been that was what you hit. I don't remember the changeset
> > number, but you could try booting your old hypervisor without the Vt-D
> > and see if that was it (iommu=off) ?
>
> Chances are, as I already mentioned the machine boots fine if I disable
> VMX in bios. Booting with "iommu=off" has the same effect.
>
> I skipped through the changelogs recently and found, one (or more) of
> the following changesets _should_ fix the issue. I'm lacking any
> knowledge about the hypervisor's internal subsystems and code paths
> though. So my seeked fix might or might not be within that subset at all.
>
> http://xenbits.xensource.com/xen-4.0-testing.hg?rev/aced00366822
> http://xenbits.xensource.com/xen-4.0-testing.hg?rev/c9f461d6ea1d
> http://xenbits.xensource.com/xen-4.0-testing.hg?rev/f7d54e1d7044
This is not the bug you are hitting, but that fix is important.
> http://xenbits.xensource.com/xen-4.0-testing.hg?rev/81a636dd784d
Ditto
> http://xenbits.xensource.com/xen-4.0-testing.hg?rev/9c7b9e65bc37
> http://xenbits.xensource.com/xen-4.0-testing.hg?rev/ae381a864b4f
> http://xenbits.xensource.com/xen-4.0-testing.hg?rev/4e689840622f
>
> As said, I look for the exact fix, to get Debian people a hint about
> what to backport for their 4.0.1 soon-to-be-stable package.
Hmm, let me ping Andrew, he might know. Andrew, do you remember what fix
you needed to get Dom0 to boot when you had more than 64GB of memory
with the VT-d enabled?
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Xen-devel] Re: Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2011-01-11 17:20 ` Konrad Rzeszutek Wilk
@ 2011-01-11 18:39 ` andrew thomas
2011-01-12 11:55 ` Arno Toell
2011-01-13 12:11 ` Arno Toell
0 siblings, 2 replies; 14+ messages in thread
From: andrew thomas @ 2011-01-11 18:39 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Arno Toell, xen-devel, Ian Campbell, xen-users
Konrad Rzeszutek Wilk wrote:
> Hmm, let me ping Andrew, he might know. Andrew, do you remember what fix
> you needed to get Dom0 to boot when you had more than 64GB of memory
> with the VT-d enabled?
>
>
From the xen-4.0-testing.hg repo:
changeset: 21403:e7d9d8d46730
user: Keir Fraser <keir@xen.org>
date: Wed Dec 15 10:31:59 2010 +0000
files: xen/arch/x86/domain_build.c
description:
x86/iommu: account for necessary allocations when calculating Dom0's
initial allocation size
As of c/s 21812:e382656e4dcc, IOMMU related allocations for Dom0
happen only after it got all of its memory allocated, and hence the
reserve (mainly for setting up its swiotlb) may get exhausted without
accounting for the necessary allocations up front.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Xen-devel] Re: Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2011-01-11 18:39 ` andrew thomas
@ 2011-01-12 11:55 ` Arno Toell
2011-01-13 12:11 ` Arno Toell
1 sibling, 0 replies; 14+ messages in thread
From: Arno Toell @ 2011-01-12 11:55 UTC (permalink / raw)
To: andrew thomas; +Cc: xen-users, xen-devel, Ian Campbell, Konrad Rzeszutek Wilk
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 11.01.2011 19:39, andrew thomas wrote:
> From the xen-4.0-testing.hg repo:
>
> changeset: 21403:e7d9d8d46730
Thank you very much, Thomas. I will forward this to Debian people, so
they hopefully will backport that fix.
- --
mit freundlichen Grüßen,
Arno Töll, BSc.
GnuPG Key-ID: 0x8408D4C4
Wavecon GmbH | Frankenstrasse 9 | 90762 Fuerth
Web: wavecon.de | Mail + Jabber at@wavecon.de
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/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=0D37
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Xen-devel] Re: Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic
2011-01-11 18:39 ` andrew thomas
2011-01-12 11:55 ` Arno Toell
@ 2011-01-13 12:11 ` Arno Toell
1 sibling, 0 replies; 14+ messages in thread
From: Arno Toell @ 2011-01-13 12:11 UTC (permalink / raw)
To: andrew thomas; +Cc: xen-users, xen-devel, Ian Campbell, Konrad Rzeszutek Wilk
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 11.01.2011 19:39, andrew thomas wrote:
> From the xen-4.0-testing.hg repo:
> changeset: 21403:e7d9d8d46730
> x86/iommu: account for necessary allocations when calculating Dom0's
> initial allocation size
I have verified this now and can confirm this commit fixes the problem.
Thank you very much.
This closes bug #1698 as well.
- --
mit freundlichen Grüßen,
Arno Töll, BSc.
GnuPG Key-ID: 0x8408D4C4
Wavecon GmbH | Frankenstrasse 9 | 90762 Fuerth
Web: wavecon.de | Mail + Jabber at@wavecon.de
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/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=y176
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2011-01-13 12:11 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <4D0AD782.8030204@wavecon.de>
[not found] ` <4D0B3DF2.5000100@wavecon.de>
[not found] ` <20101217115132.GG2754@reaktio.net>
[not found] ` <4D0B7E79.4010106@wavecon.de>
2010-12-20 20:18 ` [Xen-users] Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic Pasi Kärkkäinen
2010-12-20 20:20 ` Arno Toell
2010-12-21 13:13 ` Re: [Xen-users] " Ian Campbell
2010-12-23 11:13 ` [Xen-devel] " Arno Toell
2010-12-27 15:28 ` Re: [Xen-users] " Konrad Rzeszutek Wilk
2011-01-05 10:58 ` [Xen-devel] " Pasi Kärkkäinen
2011-01-05 16:05 ` Arno Toell
2011-01-05 16:16 ` Re: [Xen-users] " Ian Campbell
2011-01-11 16:38 ` Konrad Rzeszutek Wilk
2011-01-11 17:03 ` [Xen-devel] " Arno Toell
2011-01-11 17:20 ` Konrad Rzeszutek Wilk
2011-01-11 18:39 ` andrew thomas
2011-01-12 11:55 ` Arno Toell
2011-01-13 12:11 ` Arno Toell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.