[PATCH 0/3] memblock related top down

[PATCH 0/3] memblock related top down

[Yinghai Lu]

Please check

Those three patches to make memblock allocation more top to down.

Thanks

Yinghai

[PATCH 0/6] memblock related further cleanup for x86

[Yinghai Lu]

Please check

Those 6 patches need to be applied after three patches that i sent out 12/17/2010.

it will put page table in local node memory for 64bit numa.

Thanks

Yinghai

[PATCH 1/6] x86: Change get_max_mapped() to inline

[Yinghai Lu]

Move it into head file. to prepare use it in other files.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/include/asm/page_types.h |    5 +++++
 arch/x86/kernel/setup.c           |    9 ---------
 2 files changed, 5 insertions(+), 9 deletions(-)

Index: linux-2.6/arch/x86/include/asm/page_types.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/page_types.h
+++ linux-2.6/arch/x86/include/asm/page_types.h
@@ -45,6 +45,11 @@ extern int devmem_is_allowed(unsigned lo
 extern unsigned long max_low_pfn_mapped;
 extern unsigned long max_pfn_mapped;
 
+static inline u64 get_max_mapped(void)
+{
+	return (u64)max_pfn_mapped<<PAGE_SHIFT;
+}
+
 extern unsigned long init_memory_mapping(unsigned long start,
 					 unsigned long end);
 
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -680,15 +680,6 @@ static int __init parse_reservelow(char
 
 early_param("reservelow", parse_reservelow);
 
-static u64 __init get_max_mapped(void)
-{
-	u64 end = max_pfn_mapped;
-
-	end <<= PAGE_SHIFT;
-
-	return end;
-}
-
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures

[PATCH 2/6] x86, 64bit, numa: Allocate memnodemap under max_pfn_mapped

[Yinghai Lu]

We need to access it right way, so make sure that it is mapped already.

Prepare to put page table on local node, and nodemap is used before that.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/mm/numa_64.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-2.6/arch/x86/mm/numa_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/numa_64.c
+++ linux-2.6/arch/x86/mm/numa_64.c
@@ -87,7 +87,7 @@ static int __init allocate_cachealigned_
 
 	addr = 0x8000;
 	nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
-	nodemap_addr = memblock_find_in_range(addr, max_pfn<<PAGE_SHIFT,
+	nodemap_addr = memblock_find_in_range(addr, get_max_mapped(),
 				      nodemap_size, L1_CACHE_BYTES);
 	if (nodemap_addr == MEMBLOCK_ERROR) {
 		printk(KERN_ERR

[PATCH 3/6] x86, 64bit, numa: Put pgtable to local node memory

[Yinghai Lu]

Introduce init_memory_mapping_high(), and use it with 64bit.

It will go with every memory segment above 4g to create page table to the
memory range itself.

before this patch all page tables was on one node.

with this patch, one RED-PEN is killed

debug out for 8 sockets system after patch
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff]
[    0.000000]  0000000000 - 007f600000 page 2M
[    0.000000]  007f600000 - 007f750000 page 4k
[    0.000000] kernel direct mapping tables up to 7f750000 @ [0x7f74c000-0x7f74ffff]
[    0.000000] RAMDISK: 7bc84000 - 7f745000
....
[    0.000000] Adding active range (0, 0x10, 0x95) 0 entries of 3200 used
[    0.000000] Adding active range (0, 0x100, 0x7f750) 1 entries of 3200 used
[    0.000000] Adding active range (0, 0x100000, 0x1080000) 2 entries of 3200 used
[    0.000000] Adding active range (1, 0x1080000, 0x2080000) 3 entries of 3200 used
[    0.000000] Adding active range (2, 0x2080000, 0x3080000) 4 entries of 3200 used
[    0.000000] Adding active range (3, 0x3080000, 0x4080000) 5 entries of 3200 used
[    0.000000] Adding active range (4, 0x4080000, 0x5080000) 6 entries of 3200 used
[    0.000000] Adding active range (5, 0x5080000, 0x6080000) 7 entries of 3200 used
[    0.000000] Adding active range (6, 0x6080000, 0x7080000) 8 entries of 3200 used
[    0.000000] Adding active range (7, 0x7080000, 0x8080000) 9 entries of 3200 used
[    0.000000] init_memory_mapping: [0x00000100000000-0x0000107fffffff]
[    0.000000]  0100000000 - 1080000000 page 2M
[    0.000000] kernel direct mapping tables up to 1080000000 @ [0x107ffbd000-0x107fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x107ffc2000-0x107fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00001080000000-0x0000207fffffff]
[    0.000000]  1080000000 - 2080000000 page 2M
[    0.000000] kernel direct mapping tables up to 2080000000 @ [0x207ff7d000-0x207fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x207ffc0000-0x207fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00002080000000-0x0000307fffffff]
[    0.000000]  2080000000 - 3080000000 page 2M
[    0.000000] kernel direct mapping tables up to 3080000000 @ [0x307ff3d000-0x307fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x307ffc0000-0x307fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00003080000000-0x0000407fffffff]
[    0.000000]  3080000000 - 4080000000 page 2M
[    0.000000] kernel direct mapping tables up to 4080000000 @ [0x407fefd000-0x407fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x407ffc0000-0x407fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00004080000000-0x0000507fffffff]
[    0.000000]  4080000000 - 5080000000 page 2M
[    0.000000] kernel direct mapping tables up to 5080000000 @ [0x507febd000-0x507fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x507ffc0000-0x507fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00005080000000-0x0000607fffffff]
[    0.000000]  5080000000 - 6080000000 page 2M
[    0.000000] kernel direct mapping tables up to 6080000000 @ [0x607fe7d000-0x607fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x607ffc0000-0x607fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00006080000000-0x0000707fffffff]
[    0.000000]  6080000000 - 7080000000 page 2M
[    0.000000] kernel direct mapping tables up to 7080000000 @ [0x707fe3d000-0x707fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x707ffc0000-0x707fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00007080000000-0x0000807fffffff]
[    0.000000]  7080000000 - 8080000000 page 2M
[    0.000000] kernel direct mapping tables up to 8080000000 @ [0x807fdfc000-0x807fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x807ffbf000-0x807fffffff]          PGTABLE
[    0.000000] Initmem setup node 0 [0000000000000000-000000107fffffff]
[    0.000000]   NODE_DATA [0x0000107ffbd000-0x0000107ffc1fff]
[    0.000000] Initmem setup node 1 [0000001080000000-000000207fffffff]
[    0.000000]   NODE_DATA [0x0000207ffbb000-0x0000207ffbffff]
[    0.000000] Initmem setup node 2 [0000002080000000-000000307fffffff]
[    0.000000]   NODE_DATA [0x0000307ffbb000-0x0000307ffbffff]
[    0.000000] Initmem setup node 3 [0000003080000000-000000407fffffff]
[    0.000000]   NODE_DATA [0x0000407ffbb000-0x0000407ffbffff]
[    0.000000] Initmem setup node 4 [0000004080000000-000000507fffffff]
[    0.000000]   NODE_DATA [0x0000507ffbb000-0x0000507ffbffff]
[    0.000000] Initmem setup node 5 [0000005080000000-000000607fffffff]
[    0.000000]   NODE_DATA [0x0000607ffbb000-0x0000607ffbffff]
[    0.000000] Initmem setup node 6 [0000006080000000-000000707fffffff]
[    0.000000]   NODE_DATA [0x0000707ffbb000-0x0000707ffbffff]
[    0.000000] Initmem setup node 7 [0000007080000000-000000807fffffff]
[    0.000000]   NODE_DATA [0x0000807ffba000-0x0000807ffbefff]


Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/include/asm/page_types.h |    2 +
 arch/x86/kernel/setup.c           |    8 -----
 arch/x86/mm/amdtopology_64.c      |    8 +++--
 arch/x86/mm/init.c                |    8 -----
 arch/x86/mm/init_64.c             |   54 ++++++++++++++++++++++++++++++++++++++
 arch/x86/mm/numa_64.c             |    6 ++--
 arch/x86/mm/srat_64.c             |    2 +
 7 files changed, 68 insertions(+), 20 deletions(-)

Index: linux-2.6/arch/x86/include/asm/page_types.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/page_types.h
+++ linux-2.6/arch/x86/include/asm/page_types.h
@@ -53,6 +53,8 @@ static inline u64 get_max_mapped(void)
 extern unsigned long init_memory_mapping(unsigned long start,
 					 unsigned long end);
 
+void init_memory_mapping_high(void);
+
 extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn,
 				int acpi, int k8);
 extern void free_initmem(void);
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -941,14 +941,6 @@ void __init setup_arch(char **cmdline_p)
 	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
 	max_pfn_mapped = max_low_pfn_mapped;
 
-#ifdef CONFIG_X86_64
-	if (max_pfn > max_low_pfn) {
-		max_pfn_mapped = init_memory_mapping(1UL<<32,
-						     max_pfn<<PAGE_SHIFT);
-		/* can we preseve max_low_pfn ?*/
-		max_low_pfn = max_pfn;
-	}
-#endif
 	memblock.current_limit = get_max_mapped();
 
 	/*
Index: linux-2.6/arch/x86/mm/amdtopology_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/amdtopology_64.c
+++ linux-2.6/arch/x86/mm/amdtopology_64.c
@@ -220,12 +220,14 @@ int __init amd_scan_nodes(void)
 		apicid_base = boot_cpu_physical_apicid;
 	}
 
-	for_each_node_mask(i, node_possible_map) {
-		int j;
-
+	for_each_node_mask(i, node_possible_map)
 		memblock_x86_register_active_regions(i,
 				nodes[i].start >> PAGE_SHIFT,
 				nodes[i].end >> PAGE_SHIFT);
+	init_memory_mapping_high();
+	for_each_node_mask(i, node_possible_map) {
+		int j;
+
 		for (j = apicid_base; j < cores + apicid_base; j++)
 			apicid_to_node[(i << bits) + j] = i;
 		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
Index: linux-2.6/arch/x86/mm/init_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_64.c
+++ linux-2.6/arch/x86/mm/init_64.c
@@ -607,9 +607,63 @@ void __init initmem_init(unsigned long s
 				int acpi, int k8)
 {
 	memblock_x86_register_active_regions(0, start_pfn, end_pfn);
+	init_memory_mapping_high();
 }
 #endif
 
+struct mapping_work_data {
+	unsigned long start;
+	unsigned long end;
+	unsigned long pfn_mapped;
+};
+
+static int __init_refok
+mapping_work_fn(unsigned long start_pfn, unsigned long end_pfn, void *datax)
+{
+	struct mapping_work_data *data = datax;
+	unsigned long pfn_mapped;
+	unsigned long final_start, final_end;
+
+	final_start = max_t(unsigned long, start_pfn<<PAGE_SHIFT, data->start);
+	final_end = min_t(unsigned long, end_pfn<<PAGE_SHIFT, data->end);
+
+	if (final_end <= final_start)
+		return 0;
+
+	pfn_mapped = init_memory_mapping(final_start, final_end);
+
+	if (pfn_mapped > data->pfn_mapped)
+		data->pfn_mapped = pfn_mapped;
+
+	return 0;
+}
+
+static unsigned long __init_refok
+init_memory_mapping_active_regions(unsigned long start, unsigned long end)
+{
+	struct mapping_work_data data;
+
+	data.start = start;
+	data.end = end;
+	data.pfn_mapped = 0;
+
+	work_with_active_regions(MAX_NUMNODES, mapping_work_fn, &data);
+
+	return data.pfn_mapped;
+}
+
+void __init_refok init_memory_mapping_high(void)
+{
+	if (max_pfn > max_low_pfn) {
+		max_pfn_mapped = init_memory_mapping_active_regions(1UL<<32,
+							 max_pfn<<PAGE_SHIFT);
+		/* can we preserve max_low_pfn ? */
+		max_low_pfn = max_pfn;
+
+		memblock.current_limit = get_max_mapped();
+	}
+}
+
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
Index: linux-2.6/arch/x86/mm/numa_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/numa_64.c
+++ linux-2.6/arch/x86/mm/numa_64.c
@@ -590,11 +590,12 @@ static int __init numa_emulation(unsigne
 	 * the e820 memory map.
 	 */
 	remove_all_active_ranges();
-	for_each_node_mask(i, node_possible_map) {
+	for_each_node_mask(i, node_possible_map)
 		memblock_x86_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
 						nodes[i].end >> PAGE_SHIFT);
+	init_memory_mapping_high();
+	for_each_node_mask(i, node_possible_map)
 		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
-	}
 	acpi_fake_nodes(nodes, num_nodes);
 	numa_init_array();
 	return 0;
@@ -645,6 +646,7 @@ void __init initmem_init(unsigned long s
 	for (i = 0; i < nr_cpu_ids; i++)
 		numa_set_node(i, 0);
 	memblock_x86_register_active_regions(0, start_pfn, last_pfn);
+	init_memory_mapping_high();
 	setup_node_bootmem(0, start_pfn << PAGE_SHIFT, last_pfn << PAGE_SHIFT);
 }
 
Index: linux-2.6/arch/x86/mm/srat_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/srat_64.c
+++ linux-2.6/arch/x86/mm/srat_64.c
@@ -443,6 +443,8 @@ int __init acpi_scan_nodes(unsigned long
 		return -1;
 	}
 
+	init_memory_mapping_high();
+
 	/* Account for nodes with cpus and no memory */
 	nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed);
 
Index: linux-2.6/arch/x86/mm/init.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init.c
+++ linux-2.6/arch/x86/mm/init.c
@@ -65,16 +65,10 @@ static void __init find_early_table_spac
 #ifdef CONFIG_X86_32
 	/* for fixmap */
 	tables += roundup(__end_of_fixed_addresses * sizeof(pte_t), PAGE_SIZE);
-#endif
 
-	/*
-	 * RED-PEN putting page tables only on node 0 could
-	 * cause a hotspot and fill up ZONE_DMA. The page tables
-	 * need roughly 0.5KB per GB.
-	 */
-#ifdef CONFIG_X86_32
 	good_end = max_pfn_mapped << PAGE_SHIFT;
 #endif
+
 	base = memblock_find_in_range(start, good_end, tables, PAGE_SIZE);
 	if (base == MEMBLOCK_ERROR)
 		panic("Cannot find space for the kernel page tables");

[PATCH 4/6] x86: Use early pre-allocated page table buffer top-down

[Yinghai Lu]

We pre-allocate those buffer from top, so should use it top-down, so could
return unused part will be bottom side.
Will get less one hole in not used RAM.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/include/asm/init.h |    6 +++---
 arch/x86/mm/init.c          |   12 ++++++------
 arch/x86/mm/init_32.c       |    4 ++--
 arch/x86/mm/init_64.c       |    5 +++--
 4 files changed, 14 insertions(+), 13 deletions(-)

Index: linux-2.6/arch/x86/include/asm/init.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/init.h
+++ linux-2.6/arch/x86/include/asm/init.h
@@ -11,8 +11,8 @@ kernel_physical_mapping_init(unsigned lo
 			     unsigned long page_size_mask);
 
 
-extern unsigned long __initdata e820_table_start;
-extern unsigned long __meminitdata e820_table_end;
-extern unsigned long __meminitdata e820_table_top;
+extern unsigned long __meminitdata e820_table_start;
+extern unsigned long __initdata e820_table_end;
+extern unsigned long __meminitdata e820_table_bottom;
 
 #endif /* _ASM_X86_INIT_32_H */
Index: linux-2.6/arch/x86/mm/init.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init.c
+++ linux-2.6/arch/x86/mm/init.c
@@ -18,9 +18,9 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-unsigned long __initdata e820_table_start;
-unsigned long __meminitdata e820_table_end;
-unsigned long __meminitdata e820_table_top;
+unsigned long __meminitdata e820_table_start;
+unsigned long __initdata e820_table_end;
+unsigned long __meminitdata e820_table_bottom;
 
 int after_bootmem;
 
@@ -73,12 +73,12 @@ static void __init find_early_table_spac
 	if (base == MEMBLOCK_ERROR)
 		panic("Cannot find space for the kernel page tables");
 
-	e820_table_start = base >> PAGE_SHIFT;
+	e820_table_start = (base + tables) >> PAGE_SHIFT;
 	e820_table_end = e820_table_start;
-	e820_table_top = e820_table_start + (tables >> PAGE_SHIFT);
+	e820_table_bottom = base >> PAGE_SHIFT;
 
 	printk(KERN_DEBUG "kernel direct mapping tables up to %lx @ %lx-%lx\n",
-		end, e820_table_start << PAGE_SHIFT, e820_table_top << PAGE_SHIFT);
+		end, e820_table_bottom << PAGE_SHIFT, e820_table_end << PAGE_SHIFT);
 }
 
 struct map_range {
Index: linux-2.6/arch/x86/mm/init_32.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_32.c
+++ linux-2.6/arch/x86/mm/init_32.c
@@ -61,10 +61,10 @@ bool __read_mostly __vmalloc_start_set =
 
 static __init void *alloc_low_page(void)
 {
-	unsigned long pfn = e820_table_end++;
+	unsigned long pfn = --e820_table_start;
 	void *adr;
 
-	if (pfn >= e820_table_top)
+	if (pfn < e820_table_bottom)
 		panic("alloc_low_page: ran out of memory");
 
 	adr = __va(pfn * PAGE_SIZE);
Index: linux-2.6/arch/x86/mm/init_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_64.c
+++ linux-2.6/arch/x86/mm/init_64.c
@@ -314,7 +314,7 @@ void __init cleanup_highmap(void)
 
 static __ref void *alloc_low_page(unsigned long *phys)
 {
-	unsigned long pfn = e820_table_end++;
+	unsigned long pfn;
 	void *adr;
 
 	if (after_bootmem) {
@@ -324,7 +324,8 @@ static __ref void *alloc_low_page(unsign
 		return adr;
 	}
 
-	if (pfn >= e820_table_top)
+	pfn = --e820_table_start;
+	if (pfn < e820_table_bottom)
 		panic("alloc_low_page: ran out of memory");
 
 	adr = early_memremap(pfn * PAGE_SIZE, PAGE_SIZE);

[PATCH 5/6] x86, 64bit: Move out cleanup higmap [_brk_end, _end) out of init_memory_mapping()

[Yinghai Lu]

It is not related to init_memory_mapping(),  and init_memory_mapping() is
getting more bigger.

So make it as seperated function and call it from reserve_brk() and that is
point when _brk_end is concluded.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/kernel/setup.c |   24 ++++++++++++++++++++++++
 arch/x86/mm/init.c      |   19 -------------------
 2 files changed, 24 insertions(+), 19 deletions(-)

Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -293,10 +293,32 @@ static void __init init_gbpages(void)
 	else
 		direct_gbpages = 0;
 }
+
+static void __init cleanup_highmap_brk_end(void)
+{
+	pud_t *pud;
+	pmd_t *pmd;
+
+	mmu_cr4_features = read_cr4();
+
+	/*
+	 * _brk_end cannot change anymore, but it and _end may be
+	 * located on different 2M pages. cleanup_highmap(), however,
+	 * can only consider _end when it runs, so destroy any
+	 * mappings beyond _brk_end here.
+	 */
+	pud = pud_offset(pgd_offset_k(_brk_end), _brk_end);
+	pmd = pmd_offset(pud, _brk_end - 1);
+	while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1))
+		pmd_clear(pmd);
+}
 #else
 static inline void init_gbpages(void)
 {
 }
+static inline void cleanup_highmap_brk_end(void)
+{
+}
 #endif
 
 static void __init reserve_brk(void)
@@ -307,6 +329,8 @@ static void __init reserve_brk(void)
 	/* Mark brk area as locked down and no longer taking any
 	   new allocations */
 	_brk_start = 0;
+
+	cleanup_highmap_brk_end();
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
Index: linux-2.6/arch/x86/mm/init.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init.c
+++ linux-2.6/arch/x86/mm/init.c
@@ -270,25 +270,6 @@ unsigned long __init_refok init_memory_m
 	load_cr3(swapper_pg_dir);
 #endif
 
-#ifdef CONFIG_X86_64
-	if (!after_bootmem && !start) {
-		pud_t *pud;
-		pmd_t *pmd;
-
-		mmu_cr4_features = read_cr4();
-
-		/*
-		 * _brk_end cannot change anymore, but it and _end may be
-		 * located on different 2M pages. cleanup_highmap(), however,
-		 * can only consider _end when it runs, so destroy any
-		 * mappings beyond _brk_end here.
-		 */
-		pud = pud_offset(pgd_offset_k(_brk_end), _brk_end);
-		pmd = pmd_offset(pud, _brk_end - 1);
-		while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1))
-			pmd_clear(pmd);
-	}
-#endif
 	__flush_tlb_all();
 
 	if (!after_bootmem && e820_table_end > e820_table_start)

[PATCH 6/6] x86: Rename e820_table_* to pgt_buf_*

[Yinghai Lu]

Now it is found from memblock way.

Change the name to purpose related.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/include/asm/init.h |    6 +++---
 arch/x86/mm/init.c          |   20 ++++++++++----------
 arch/x86/mm/init_32.c       |    8 ++++----
 arch/x86/mm/init_64.c       |    4 ++--
 arch/x86/xen/mmu.c          |    2 +-
 5 files changed, 20 insertions(+), 20 deletions(-)

Index: linux-2.6/arch/x86/include/asm/init.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/init.h
+++ linux-2.6/arch/x86/include/asm/init.h
@@ -11,8 +11,8 @@ kernel_physical_mapping_init(unsigned lo
 			     unsigned long page_size_mask);
 
 
-extern unsigned long __meminitdata e820_table_start;
-extern unsigned long __initdata e820_table_end;
-extern unsigned long __meminitdata e820_table_bottom;
+extern unsigned long __meminitdata pgt_buf_start;
+extern unsigned long __initdata pgt_buf_end;
+extern unsigned long __meminitdata pgt_buf_bottom;
 
 #endif /* _ASM_X86_INIT_32_H */
Index: linux-2.6/arch/x86/mm/init.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init.c
+++ linux-2.6/arch/x86/mm/init.c
@@ -18,9 +18,9 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-unsigned long __meminitdata e820_table_start;
-unsigned long __initdata e820_table_end;
-unsigned long __meminitdata e820_table_bottom;
+unsigned long __meminitdata pgt_buf_start;
+unsigned long __initdata pgt_buf_end;
+unsigned long __meminitdata pgt_buf_bottom;
 
 int after_bootmem;
 
@@ -73,12 +73,12 @@ static void __init find_early_table_spac
 	if (base == MEMBLOCK_ERROR)
 		panic("Cannot find space for the kernel page tables");
 
-	e820_table_start = (base + tables) >> PAGE_SHIFT;
-	e820_table_end = e820_table_start;
-	e820_table_bottom = base >> PAGE_SHIFT;
+	pgt_buf_start = (base + tables) >> PAGE_SHIFT;
+	pgt_buf_end = pgt_buf_start;
+	pgt_buf_bottom = base >> PAGE_SHIFT;
 
 	printk(KERN_DEBUG "kernel direct mapping tables up to %lx @ %lx-%lx\n",
-		end, e820_table_bottom << PAGE_SHIFT, e820_table_end << PAGE_SHIFT);
+		end, pgt_buf_bottom << PAGE_SHIFT, pgt_buf_end << PAGE_SHIFT);
 }
 
 struct map_range {
@@ -272,9 +272,9 @@ unsigned long __init_refok init_memory_m
 
 	__flush_tlb_all();
 
-	if (!after_bootmem && e820_table_end > e820_table_start)
-		memblock_x86_reserve_range(e820_table_start << PAGE_SHIFT,
-				 e820_table_end << PAGE_SHIFT, "PGTABLE");
+	if (!after_bootmem && pgt_buf_end > pgt_buf_start)
+		memblock_x86_reserve_range(pgt_buf_start << PAGE_SHIFT,
+				 pgt_buf_end << PAGE_SHIFT, "PGTABLE");
 
 	if (!after_bootmem)
 		early_memtest(start, end);
Index: linux-2.6/arch/x86/mm/init_32.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_32.c
+++ linux-2.6/arch/x86/mm/init_32.c
@@ -61,10 +61,10 @@ bool __read_mostly __vmalloc_start_set =
 
 static __init void *alloc_low_page(void)
 {
-	unsigned long pfn = --e820_table_start;
+	unsigned long pfn = --pgt_buf_start;
 	void *adr;
 
-	if (pfn < e820_table_bottom)
+	if (pfn < pgt_buf_bottom)
 		panic("alloc_low_page: ran out of memory");
 
 	adr = __va(pfn * PAGE_SIZE);
@@ -162,8 +162,8 @@ static pte_t *__init page_table_kmap_che
 	if (pmd_idx_kmap_begin != pmd_idx_kmap_end
 	    && (vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin
 	    && (vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end
-	    && ((__pa(pte) >> PAGE_SHIFT) < e820_table_start
-		|| (__pa(pte) >> PAGE_SHIFT) >= e820_table_end)) {
+	    && ((__pa(pte) >> PAGE_SHIFT) < pgt_buf_start
+		|| (__pa(pte) >> PAGE_SHIFT) >= pgt_buf_end)) {
 		pte_t *newpte;
 		int i;
 
Index: linux-2.6/arch/x86/mm/init_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_64.c
+++ linux-2.6/arch/x86/mm/init_64.c
@@ -324,8 +324,8 @@ static __ref void *alloc_low_page(unsign
 		return adr;
 	}
 
-	pfn = --e820_table_start;
-	if (pfn < e820_table_bottom)
+	pfn = --pgt_buf_start;
+	if (pfn < pgt_buf_bottom)
 		panic("alloc_low_page: ran out of memory");
 
 	adr = early_memremap(pfn * PAGE_SIZE, PAGE_SIZE);
Index: linux-2.6/arch/x86/xen/mmu.c
===================================================================
--- linux-2.6.orig/arch/x86/xen/mmu.c
+++ linux-2.6/arch/x86/xen/mmu.c
@@ -1807,7 +1807,7 @@ static __init pte_t mask_rw_pte(pte_t *p
 	 * early_ioremap fixmap slot, make sure it is RO.
 	 */
 	if (!is_early_ioremap_ptep(ptep) &&
-	    pfn >= e820_table_start && pfn < e820_table_end)
+	    pfn >= pgt_buf_start && pfn < pgt_buf_end)
 		pte = pte_wrprotect(pte);
 
 	return pte;

Re: [PATCH 0/3] memblock related top down

[H. Peter Anvin]

On 12/17/2010 04:58 PM, Yinghai Lu wrote:
> Please check
> 
> Those three patches to make memblock allocation more top to down.
> 

Please explain what you mean with "more top to down".  Not what the code
does, but what is the goal of the patchset.

	-hpa

Re: [PATCH 0/3] memblock related top down

[Yinghai Lu]

On Tue, Dec 28, 2010 at 12:21 PM, H. Peter Anvin <hpa@zytor.com> wrote:
> On 12/17/2010 04:58 PM, Yinghai Lu wrote:
>> Please check
>>
>> Those three patches to make memblock allocation more top to down.
>>
>
> Please explain what you mean with "more top to down".  Not what the code
> does, but what is the goal of the patchset.

for example first node with 16g ram, it is into two parts: [0, 2g),
and [4g, 18g).

alloc_bootmem will get allocation from [0, 2g) always until we have
can not find more.

with third patch, it will try to get from [4g, 18g) at first.

second patch is need to applied before third patch, because old way
happenly get under 4g for generic bootmem under 4g

First one is trying not to put page table for [0, 4g) under 512M.

Thanks

Yinghai

Re: [PATCH 0/3] memblock related top down

[H. Peter Anvin]

On 12/28/2010 01:36 PM, Yinghai Lu wrote:
> On Tue, Dec 28, 2010 at 12:21 PM, H. Peter Anvin <hpa@zytor.com> wrote:
>> On 12/17/2010 04:58 PM, Yinghai Lu wrote:
>>> Please check
>>>
>>> Those three patches to make memblock allocation more top to down.
>>>
>>
>> Please explain what you mean with "more top to down".  Not what the code
>> does, but what is the goal of the patchset.
> 
> for example first node with 16g ram, it is into two parts: [0, 2g),
> and [4g, 18g).
> 
> alloc_bootmem will get allocation from [0, 2g) always until we have
> can not find more.
> 
> with third patch, it will try to get from [4g, 18g) at first.
> 
> second patch is need to applied before third patch, because old way
> happenly get under 4g for generic bootmem under 4g
> 
> First one is trying not to put page table for [0, 4g) under 512M.
> 

The goal of this is to free up low memory for DMA and kdump, I presume?

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

Re: [PATCH 0/3] memblock related top down

[Yinghai Lu]

On Tue, Dec 28, 2010 at 2:09 PM, H. Peter Anvin <hpa@zytor.com> wrote:
> On 12/28/2010 01:36 PM, Yinghai Lu wrote:
>> On Tue, Dec 28, 2010 at 12:21 PM, H. Peter Anvin <hpa@zytor.com> wrote:
>>> On 12/17/2010 04:58 PM, Yinghai Lu wrote:
>>>> Please check
>>>>
>>>> Those three patches to make memblock allocation more top to down.
>>>>
>>>
>>> Please explain what you mean with "more top to down".  Not what the code
>>> does, but what is the goal of the patchset.
>>
>> for example first node with 16g ram, it is into two parts: [0, 2g),
>> and [4g, 18g).
>>
>> alloc_bootmem will get allocation from [0, 2g) always until we have
>> can not find more.
>>
>> with third patch, it will try to get from [4g, 18g) at first.
>>
>> second patch is need to applied before third patch, because old way
>> happenly get under 4g for generic bootmem under 4g
>>
>> First one is trying not to put page table for [0, 4g) under 512M.
>>
>
> The goal of this is to free up low memory for DMA and kdump, I presume?

yes.  otherwise if we put pgtable around 512M, then we have no chance
to allocate 512M for kdump under 896M.
if we put pgtable near 2g <assume [2g, 4g) for mmio),  We can make it happen.

later 6 patches will put try to pgtable on local node.

Thanks

Re: [PATCH 1/6] x86: Change get_max_mapped() to inline

[H. Peter Anvin]

On 12/27/2010 04:47 PM, Yinghai Lu wrote:
> 
> Move it into head file. to prepare use it in other files.
> 
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> 
> ---
>  arch/x86/include/asm/page_types.h |    5 +++++
>  arch/x86/kernel/setup.c           |    9 ---------
>  2 files changed, 5 insertions(+), 9 deletions(-)
> 
> Index: linux-2.6/arch/x86/include/asm/page_types.h
> ===================================================================
> --- linux-2.6.orig/arch/x86/include/asm/page_types.h
> +++ linux-2.6/arch/x86/include/asm/page_types.h
> @@ -45,6 +45,11 @@ extern int devmem_is_allowed(unsigned lo
>  extern unsigned long max_low_pfn_mapped;
>  extern unsigned long max_pfn_mapped;
>  
> +static inline u64 get_max_mapped(void)
> +{
> +	return (u64)max_pfn_mapped<<PAGE_SHIFT;
> +}
> +
>  extern unsigned long init_memory_mapping(unsigned long start,
>  					 unsigned long end);
>  

This is broken.  <asm/page_types.h> doesn't include <linux/types.h>
which is required for the u64 type -- a simple compile test would have
told you this.  Furthermore, it seems to me that it would make more
sense for this to be phys_addr_t instead of u64; would you agree?

	-hpa

Re: [PATCH 1/6] x86: Change get_max_mapped() to inline

[Yinghai Lu]

On Wed, Dec 29, 2010 at 3:05 PM, H. Peter Anvin <hpa@zytor.com> wrote:
> On 12/27/2010 04:47 PM, Yinghai Lu wrote:
>>
>> Move it into head file. to prepare use it in other files.
>>
>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>>
>> ---
>>  arch/x86/include/asm/page_types.h |    5 +++++
>>  arch/x86/kernel/setup.c           |    9 ---------
>>  2 files changed, 5 insertions(+), 9 deletions(-)
>>
>> Index: linux-2.6/arch/x86/include/asm/page_types.h
>> ===================================================================
>> --- linux-2.6.orig/arch/x86/include/asm/page_types.h
>> +++ linux-2.6/arch/x86/include/asm/page_types.h
>> @@ -45,6 +45,11 @@ extern int devmem_is_allowed(unsigned lo
>>  extern unsigned long max_low_pfn_mapped;
>>  extern unsigned long max_pfn_mapped;
>>
>> +static inline u64 get_max_mapped(void)
>> +{
>> +     return (u64)max_pfn_mapped<<PAGE_SHIFT;
>> +}
>> +
>>  extern unsigned long init_memory_mapping(unsigned long start,
>>                                        unsigned long end);
>>
>
> This is broken.  <asm/page_types.h> doesn't include <linux/types.h>
> which is required for the u64 type -- a simple compile test would have
> told you this.

compile test fail on 32 bit?

> Furthermore, it seems to me that it would make more
> sense for this to be phys_addr_t instead of u64; would you agree?

yes.

Re: [PATCH 1/6] x86: Change get_max_mapped() to inline

[Yinghai Lu]

On Wed, Dec 29, 2010 at 3:30 PM, Yinghai Lu <yinghai@kernel.org> wrote:

>>> Index: linux-2.6/arch/x86/include/asm/page_types.h
>>> ===================================================================
>>> --- linux-2.6.orig/arch/x86/include/asm/page_types.h
>>> +++ linux-2.6/arch/x86/include/asm/page_types.h
>>> @@ -45,6 +45,11 @@ extern int devmem_is_allowed(unsigned lo
>>>  extern unsigned long max_low_pfn_mapped;
>>>  extern unsigned long max_pfn_mapped;
>>>
>>> +static inline u64 get_max_mapped(void)
>>> +{
>>> +     return (u64)max_pfn_mapped<<PAGE_SHIFT;
>>> +}
>>> +
>>>  extern unsigned long init_memory_mapping(unsigned long start,
>>>                                        unsigned long end);
>>>
>>
>
>> Furthermore, it seems to me that it would make more
>> sense for this to be phys_addr_t instead of u64; would you agree?
>
> yes.

or could just use unsigned long instead.

on 32bit it will be under 4g
on 64bit unsigned long  is 64bit already.

Thanks

Yinghai

Re: [PATCH 1/6] x86: Change get_max_mapped() to inline

[H. Peter Anvin]

On 12/29/2010 03:37 PM, Yinghai Lu wrote:
> 
> or could just use unsigned long instead.
> 
> on 32bit it will be under 4g
> on 64bit unsigned long  is 64bit already.
> 

This is true, although it seems fragile -- the whole terminology and the
differences between 32 and 64 bits are just a huge headache.

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

[PATCH -v2 1/6] x86: Change get_max_mapped() to inline

[Yinghai Lu]

Move it into head file. to prepare use it in other files.

-v2: hpa pointed out that u64 should not be used here.
     Actually We could unsigned long here. because for 32bit it will under 4g.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/include/asm/page_types.h |    5 +++++
 arch/x86/kernel/setup.c           |    9 ---------
 2 files changed, 5 insertions(+), 9 deletions(-)

Index: linux-2.6/arch/x86/include/asm/page_types.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/page_types.h
+++ linux-2.6/arch/x86/include/asm/page_types.h
@@ -45,6 +45,11 @@ extern int devmem_is_allowed(unsigned lo
 extern unsigned long max_low_pfn_mapped;
 extern unsigned long max_pfn_mapped;
 
+static inline unsigned long get_max_mapped(void)
+{
+	return max_pfn_mapped<<PAGE_SHIFT;
+}
+
 extern unsigned long init_memory_mapping(unsigned long start,
 					 unsigned long end);
 
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -680,15 +680,6 @@ static int __init parse_reservelow(char
 
 early_param("reservelow", parse_reservelow);
 
-static u64 __init get_max_mapped(void)
-{
-	u64 end = max_pfn_mapped;
-
-	end <<= PAGE_SHIFT;
-
-	return end;
-}
-
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures

[PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[Yinghai Lu]

Introduce init_memory_mapping_high(), and use it with 64bit.

It will go with every memory segment above 4g to create page table to the
memory range itself.

before this patch all page tables was on one node.

with this patch, one RED-PEN is killed

debug out for 8 sockets system after patch
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff]
[    0.000000]  0000000000 - 007f600000 page 2M
[    0.000000]  007f600000 - 007f750000 page 4k
[    0.000000] kernel direct mapping tables up to 7f750000 @ [0x7f74c000-0x7f74ffff]
[    0.000000] RAMDISK: 7bc84000 - 7f745000
....
[    0.000000] Adding active range (0, 0x10, 0x95) 0 entries of 3200 used
[    0.000000] Adding active range (0, 0x100, 0x7f750) 1 entries of 3200 used
[    0.000000] Adding active range (0, 0x100000, 0x1080000) 2 entries of 3200 used
[    0.000000] Adding active range (1, 0x1080000, 0x2080000) 3 entries of 3200 used
[    0.000000] Adding active range (2, 0x2080000, 0x3080000) 4 entries of 3200 used
[    0.000000] Adding active range (3, 0x3080000, 0x4080000) 5 entries of 3200 used
[    0.000000] Adding active range (4, 0x4080000, 0x5080000) 6 entries of 3200 used
[    0.000000] Adding active range (5, 0x5080000, 0x6080000) 7 entries of 3200 used
[    0.000000] Adding active range (6, 0x6080000, 0x7080000) 8 entries of 3200 used
[    0.000000] Adding active range (7, 0x7080000, 0x8080000) 9 entries of 3200 used
[    0.000000] init_memory_mapping: [0x00000100000000-0x0000107fffffff]
[    0.000000]  0100000000 - 1080000000 page 2M
[    0.000000] kernel direct mapping tables up to 1080000000 @ [0x107ffbd000-0x107fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x107ffc2000-0x107fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00001080000000-0x0000207fffffff]
[    0.000000]  1080000000 - 2080000000 page 2M
[    0.000000] kernel direct mapping tables up to 2080000000 @ [0x207ff7d000-0x207fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x207ffc0000-0x207fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00002080000000-0x0000307fffffff]
[    0.000000]  2080000000 - 3080000000 page 2M
[    0.000000] kernel direct mapping tables up to 3080000000 @ [0x307ff3d000-0x307fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x307ffc0000-0x307fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00003080000000-0x0000407fffffff]
[    0.000000]  3080000000 - 4080000000 page 2M
[    0.000000] kernel direct mapping tables up to 4080000000 @ [0x407fefd000-0x407fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x407ffc0000-0x407fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00004080000000-0x0000507fffffff]
[    0.000000]  4080000000 - 5080000000 page 2M
[    0.000000] kernel direct mapping tables up to 5080000000 @ [0x507febd000-0x507fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x507ffc0000-0x507fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00005080000000-0x0000607fffffff]
[    0.000000]  5080000000 - 6080000000 page 2M
[    0.000000] kernel direct mapping tables up to 6080000000 @ [0x607fe7d000-0x607fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x607ffc0000-0x607fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00006080000000-0x0000707fffffff]
[    0.000000]  6080000000 - 7080000000 page 2M
[    0.000000] kernel direct mapping tables up to 7080000000 @ [0x707fe3d000-0x707fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x707ffc0000-0x707fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00007080000000-0x0000807fffffff]
[    0.000000]  7080000000 - 8080000000 page 2M
[    0.000000] kernel direct mapping tables up to 8080000000 @ [0x807fdfc000-0x807fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x807ffbf000-0x807fffffff]          PGTABLE
[    0.000000] Initmem setup node 0 [0000000000000000-000000107fffffff]
[    0.000000]   NODE_DATA [0x0000107ffbd000-0x0000107ffc1fff]
[    0.000000] Initmem setup node 1 [0000001080000000-000000207fffffff]
[    0.000000]   NODE_DATA [0x0000207ffbb000-0x0000207ffbffff]
[    0.000000] Initmem setup node 2 [0000002080000000-000000307fffffff]
[    0.000000]   NODE_DATA [0x0000307ffbb000-0x0000307ffbffff]
[    0.000000] Initmem setup node 3 [0000003080000000-000000407fffffff]
[    0.000000]   NODE_DATA [0x0000407ffbb000-0x0000407ffbffff]
[    0.000000] Initmem setup node 4 [0000004080000000-000000507fffffff]
[    0.000000]   NODE_DATA [0x0000507ffbb000-0x0000507ffbffff]
[    0.000000] Initmem setup node 5 [0000005080000000-000000607fffffff]
[    0.000000]   NODE_DATA [0x0000607ffbb000-0x0000607ffbffff]
[    0.000000] Initmem setup node 6 [0000006080000000-000000707fffffff]
[    0.000000]   NODE_DATA [0x0000707ffbb000-0x0000707ffbffff]
[    0.000000] Initmem setup node 7 [0000007080000000-000000807fffffff]
[    0.000000]   NODE_DATA [0x0000807ffba000-0x0000807ffbefff]

-v2: update it to recent numa-emulation change

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/include/asm/page_types.h |    2 +
 arch/x86/kernel/setup.c           |    8 -----
 arch/x86/mm/amdtopology_64.c      |    8 +++--
 arch/x86/mm/init.c                |    8 -----
 arch/x86/mm/init_64.c             |   54 ++++++++++++++++++++++++++++++++++++++
 arch/x86/mm/numa_64.c             |    6 ++--
 arch/x86/mm/srat_64.c             |    2 +
 7 files changed, 68 insertions(+), 20 deletions(-)

Index: linux-2.6/arch/x86/include/asm/page_types.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/page_types.h
+++ linux-2.6/arch/x86/include/asm/page_types.h
@@ -53,6 +53,8 @@ static inline u64 get_max_mapped(void)
 extern unsigned long init_memory_mapping(unsigned long start,
 					 unsigned long end);
 
+void init_memory_mapping_high(void);
+
 extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn,
 				int acpi, int k8);
 extern void free_initmem(void);
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -941,14 +941,6 @@ void __init setup_arch(char **cmdline_p)
 	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
 	max_pfn_mapped = max_low_pfn_mapped;
 
-#ifdef CONFIG_X86_64
-	if (max_pfn > max_low_pfn) {
-		max_pfn_mapped = init_memory_mapping(1UL<<32,
-						     max_pfn<<PAGE_SHIFT);
-		/* can we preseve max_low_pfn ?*/
-		max_low_pfn = max_pfn;
-	}
-#endif
 	memblock.current_limit = get_max_mapped();
 
 	/*
Index: linux-2.6/arch/x86/mm/amdtopology_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/amdtopology_64.c
+++ linux-2.6/arch/x86/mm/amdtopology_64.c
@@ -278,12 +278,14 @@ int __init amd_scan_nodes(void)
 		apicid_base = boot_cpu_physical_apicid;
 	}
 
-	for_each_node_mask(i, node_possible_map) {
-		int j;
-
+	for_each_node_mask(i, node_possible_map)
 		memblock_x86_register_active_regions(i,
 				nodes[i].start >> PAGE_SHIFT,
 				nodes[i].end >> PAGE_SHIFT);
+	init_memory_mapping_high();
+	for_each_node_mask(i, node_possible_map) {
+		int j;
+
 		for (j = apicid_base; j < cores + apicid_base; j++)
 			apicid_to_node[(i << bits) + j] = i;
 		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
Index: linux-2.6/arch/x86/mm/init_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_64.c
+++ linux-2.6/arch/x86/mm/init_64.c
@@ -607,9 +607,63 @@ void __init initmem_init(unsigned long s
 				int acpi, int k8)
 {
 	memblock_x86_register_active_regions(0, start_pfn, end_pfn);
+	init_memory_mapping_high();
 }
 #endif
 
+struct mapping_work_data {
+	unsigned long start;
+	unsigned long end;
+	unsigned long pfn_mapped;
+};
+
+static int __init_refok
+mapping_work_fn(unsigned long start_pfn, unsigned long end_pfn, void *datax)
+{
+	struct mapping_work_data *data = datax;
+	unsigned long pfn_mapped;
+	unsigned long final_start, final_end;
+
+	final_start = max_t(unsigned long, start_pfn<<PAGE_SHIFT, data->start);
+	final_end = min_t(unsigned long, end_pfn<<PAGE_SHIFT, data->end);
+
+	if (final_end <= final_start)
+		return 0;
+
+	pfn_mapped = init_memory_mapping(final_start, final_end);
+
+	if (pfn_mapped > data->pfn_mapped)
+		data->pfn_mapped = pfn_mapped;
+
+	return 0;
+}
+
+static unsigned long __init_refok
+init_memory_mapping_active_regions(unsigned long start, unsigned long end)
+{
+	struct mapping_work_data data;
+
+	data.start = start;
+	data.end = end;
+	data.pfn_mapped = 0;
+
+	work_with_active_regions(MAX_NUMNODES, mapping_work_fn, &data);
+
+	return data.pfn_mapped;
+}
+
+void __init_refok init_memory_mapping_high(void)
+{
+	if (max_pfn > max_low_pfn) {
+		max_pfn_mapped = init_memory_mapping_active_regions(1UL<<32,
+							 max_pfn<<PAGE_SHIFT);
+		/* can we preserve max_low_pfn ? */
+		max_low_pfn = max_pfn;
+
+		memblock.current_limit = get_max_mapped();
+	}
+}
+
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
Index: linux-2.6/arch/x86/mm/numa_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/numa_64.c
+++ linux-2.6/arch/x86/mm/numa_64.c
@@ -594,11 +594,12 @@ static int __init numa_emulation(unsigne
 	 * the e820 memory map.
 	 */
 	remove_all_active_ranges();
-	for_each_node_mask(i, node_possible_map) {
+	for_each_node_mask(i, node_possible_map)
 		memblock_x86_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
 						nodes[i].end >> PAGE_SHIFT);
+	init_memory_mapping_high();
+	for_each_node_mask(i, node_possible_map)
 		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
-	}
 	setup_physnodes(addr, max_addr, acpi, amd);
 	fake_physnodes(acpi, amd, num_nodes);
 	numa_init_array();
@@ -654,6 +655,7 @@ void __init initmem_init(unsigned long s
 	for (i = 0; i < nr_cpu_ids; i++)
 		numa_set_node(i, 0);
 	memblock_x86_register_active_regions(0, start_pfn, last_pfn);
+	init_memory_mapping_high();
 	setup_node_bootmem(0, start_pfn << PAGE_SHIFT, last_pfn << PAGE_SHIFT);
 }
 
Index: linux-2.6/arch/x86/mm/srat_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/srat_64.c
+++ linux-2.6/arch/x86/mm/srat_64.c
@@ -444,6 +444,8 @@ int __init acpi_scan_nodes(unsigned long
 		return -1;
 	}
 
+	init_memory_mapping_high();
+
 	/* Account for nodes with cpus and no memory */
 	nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed);
 
Index: linux-2.6/arch/x86/mm/init.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init.c
+++ linux-2.6/arch/x86/mm/init.c
@@ -65,16 +65,10 @@ static void __init find_early_table_spac
 #ifdef CONFIG_X86_32
 	/* for fixmap */
 	tables += roundup(__end_of_fixed_addresses * sizeof(pte_t), PAGE_SIZE);
-#endif
 
-	/*
-	 * RED-PEN putting page tables only on node 0 could
-	 * cause a hotspot and fill up ZONE_DMA. The page tables
-	 * need roughly 0.5KB per GB.
-	 */
-#ifdef CONFIG_X86_32
 	good_end = max_pfn_mapped << PAGE_SHIFT;
 #endif
+
 	base = memblock_find_in_range(start, good_end, tables, PAGE_SIZE);
 	if (base == MEMBLOCK_ERROR)
 		panic("Cannot find space for the kernel page tables");

Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[H. Peter Anvin]

On 12/29/2010 03:46 PM, Yinghai Lu wrote:
> 
> -v2: update it to recent numa-emulation change
> 

Lovely, yet another interbranch conflict.  This makes me very concerned.

What is the delta between these?

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[Yinghai Lu]

On Wed, Dec 29, 2010 at 3:50 PM, H. Peter Anvin <hpa@zytor.com> wrote:
> On 12/29/2010 03:46 PM, Yinghai Lu wrote:
>>
>> -v2: update it to recent numa-emulation change
>>
>
> Lovely, yet another interbranch conflict.  This makes me very concerned.
>
> What is the delta between these?
>

your new x86/numa have

       setup_physnodes(addr, max_addr, acpi, amd);
       fake_physnodes(acpi, amd, num_nodes);

instead of

        acpi_fake_nodes(nodes, num_nodes);

in  numa_emulation()

Thanks

Yinghai

Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[David Rientjes]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 729 bytes --]

On Wed, 29 Dec 2010, Yinghai Lu wrote:

> >> -v2: update it to recent numa-emulation change
> >>
> >
> > Lovely, yet another interbranch conflict.  This makes me very concerned.
> >
> > What is the delta between these?
> >
> 
> your new x86/numa have
> 
>        setup_physnodes(addr, max_addr, acpi, amd);
>        fake_physnodes(acpi, amd, num_nodes);
> 
> instead of
> 
>         acpi_fake_nodes(nodes, num_nodes);
> 
> in  numa_emulation()
> 

That's from f51bf3073a1 (x86, numa: Fake apicid and pxm mappings for NUMA 
emulation) and c1c3443c9c (x86, numa: Fake node-to-cpumask for NUMA 
emulation) in x86/numa.  Given the subject line, I think your patchset is 
targeted to the same branch so I'm not sure what's concerning?

Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[H. Peter Anvin]

On 12/29/2010 04:39 PM, David Rientjes wrote:
> On Wed, 29 Dec 2010, Yinghai Lu wrote:
> 
>>>> -v2: update it to recent numa-emulation change
>>>>
>>>
>>> Lovely, yet another interbranch conflict.  This makes me very concerned.
>>>
>>> What is the delta between these?
>>>
>>
>> your new x86/numa have
>>
>>        setup_physnodes(addr, max_addr, acpi, amd);
>>        fake_physnodes(acpi, amd, num_nodes);
>>
>> instead of
>>
>>         acpi_fake_nodes(nodes, num_nodes);
>>
>> in  numa_emulation()
>>
> 
> That's from f51bf3073a1 (x86, numa: Fake apicid and pxm mappings for NUMA 
> emulation) and c1c3443c9c (x86, numa: Fake node-to-cpumask for NUMA 
> emulation) in x86/numa.  Given the subject line, I think your patchset is 
> targeted to the same branch so I'm not sure what's concerning?

No, it's part of a much bigger patchset which doesn't have anything to
do with NUMA.  That's the problem.

In other words, I need a sane way to merge them and resolve the conflict.

	-hpa

Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[David Rientjes]

On Wed, 29 Dec 2010, H. Peter Anvin wrote:

> > That's from f51bf3073a1 (x86, numa: Fake apicid and pxm mappings for NUMA 
> > emulation) and c1c3443c9c (x86, numa: Fake node-to-cpumask for NUMA 
> > emulation) in x86/numa.  Given the subject line, I think your patchset is 
> > targeted to the same branch so I'm not sure what's concerning?
> 
> No, it's part of a much bigger patchset which doesn't have anything to
> do with NUMA.  That's the problem.
> 
> In other words, I need a sane way to merge them and resolve the conflict.
> 

The two patches above from x86/numa that create the conflict should be 
dependent only on 4e76f4e67a (x86, numa: Avoid compiling NUMA emulation 
functions without CONFIG_NUMA_EMU), so cherry-pick them into x86/bootmem?

Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[H. Peter Anvin]

On 12/29/2010 05:07 PM, David Rientjes wrote:
> On Wed, 29 Dec 2010, H. Peter Anvin wrote:
> 
>>> That's from f51bf3073a1 (x86, numa: Fake apicid and pxm mappings for NUMA 
>>> emulation) and c1c3443c9c (x86, numa: Fake node-to-cpumask for NUMA 
>>> emulation) in x86/numa.  Given the subject line, I think your patchset is 
>>> targeted to the same branch so I'm not sure what's concerning?
>>
>> No, it's part of a much bigger patchset which doesn't have anything to
>> do with NUMA.  That's the problem.
>>
>> In other words, I need a sane way to merge them and resolve the conflict.
>
> The two patches above from x86/numa that create the conflict should be 
> dependent only on 4e76f4e67a (x86, numa: Avoid compiling NUMA emulation 
> functions without CONFIG_NUMA_EMU), so cherry-pick them into x86/bootmem?

That would hurt more, I think.

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.

Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[Ingo Molnar]

* H. Peter Anvin <hpa@zytor.com> wrote:

> On 12/29/2010 05:07 PM, David Rientjes wrote:
> > On Wed, 29 Dec 2010, H. Peter Anvin wrote:
> > 
> >>> That's from f51bf3073a1 (x86, numa: Fake apicid and pxm mappings for NUMA 
> >>> emulation) and c1c3443c9c (x86, numa: Fake node-to-cpumask for NUMA 
> >>> emulation) in x86/numa.  Given the subject line, I think your patchset is 
> >>> targeted to the same branch so I'm not sure what's concerning?
> >>
> >> No, it's part of a much bigger patchset which doesn't have anything to
> >> do with NUMA.  That's the problem.
> >>
> >> In other words, I need a sane way to merge them and resolve the conflict.
> >
> > The two patches above from x86/numa that create the conflict should be 
> > dependent only on 4e76f4e67a (x86, numa: Avoid compiling NUMA emulation 
> > functions without CONFIG_NUMA_EMU), so cherry-pick them into x86/bootmem?
> 
> That would hurt more, I think.

x86/bootmem could be based on x86/numa - the latter is stable so it's not like we'll 
have to undo it from under x86/bootmem. We can then send it to Linus once x86/numa 
is upstream.

Btw., i suspect we want to use x86/memblock instead of x86/bootmem?

Thanks,

	Ingo

[boot crash] Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 3077 bytes --]


FYI, either the x86/numa or the x86/bootmem changes cause the early boot crash 
below. Config attached.

Thanks,

	Ingo

---------------->
Linux version 2.6.37-rc8-tip-01830-g7937b8c-dirty (mingo@sirius) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #76886 SMP Thu Dec 30 12:12:49 CET 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
bootconsole [earlyser0] enabled
debug: ignoring loglevel setting.
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
DMI: A8N-E/System Product Name, BIOS ASUS A8N-E ACPI BIOS Revision 1008 08/22/2005
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0000000000 mask FFC0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f5680] f5680
  mpc: f1400-f152c
Scanning 0 areas for low memory corruption
initial memory mapped : 0 - 02800000
init_memory_mapping: 0000000000000000-00000000373fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037000000 page 2M
 0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 27fa000-2800000
BUG: Int 6: CR2 00f06f53
     EDI c27fd000  ESI c27fd000  EBP c1b27f20  ESP c1b27ef0
     EBX ffc00000  EDX 00000006  ECX 00000010  EAX c27ff000
     err   (null)  EIP c1c01c79   CS 00000060  flg 00010087
Stack:   (null) c27fe000 c1db6ffc 000003ff c1db6ffc c1b27f74 00000003 373fe000
       c1b27f28 c1c01f9e c1b27f78 c17c85a8 00000002   (null)   (null) 000373fe
       373fe000 00000003   (null) 00400000   (null) 00400000 37000000 00000004
Pid: 0, comm: swapper Not tainted 2.6.37-rc8-tip-01830-g7937b8c-dirty #76886
Call Trace:
 [<c1809ad9>] ? hlt_loop+0x0/0xf
 [<c1c01c79>] ? page_table_range_init.clone.10+0x10c/0x157
 [<c1c01f9e>] ? early_ioremap_page_table_range_init+0x23/0x2a
 [<c17c85a8>] ? init_memory_mapping+0x2cb/0x34f
 [<c1bf8d86>] ? setup_arch+0x5d0/0x7c2
 [<c104b79e>] ? debug_check_no_locks_freed+0xf3/0x104
 [<c104b402>] ? lockdep_init_map+0x8a/0xf5
 [<c1bf74ce>] ? start_kernel+0x93/0x2bf
 [<c1bf7080>] ? i386_start_kernel+0x80/0x87
Press any key to enter the menu

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 69160 bytes --]

#
# Automatically generated make config: don't edit
# Linux/i386 2.6.37-rc8 Kernel Configuration
# Thu Dec 30 12:48:32 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_LZO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_AUTO_IRQ_AFFINITY is not set
# CONFIG_IRQ_PER_CPU is not set
# CONFIG_HARDIRQS_SW_RESEND is not set
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_SRCU_SYNCHRONIZE_DELAY=10
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y

#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_PM is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_OLPC_OPENFIRMWARE=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
CONFIG_I82092=y
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
CONFIG_HOTPLUG_PCI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
# CONFIG_IP_VS_PROTO_SCTP is not set

#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
# CONFIG_IP_VS_WLC is not set
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
# CONFIG_IP_VS_DH is not set
CONFIG_IP_VS_SH=y
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set

#
# IPVS application helper
#

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
CONFIG_IP6_NF_QUEUE=y
# CONFIG_IP6_NF_IPTABLES is not set

#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not set
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=y
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not set
# CONFIG_NET_DSA_TAG_TRAILER is not set
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_LAPB=y
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=y
# CONFIG_PHONET is not set
CONFIG_IEEE802154=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_RPS=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y

#
# CFG80211 needs to be enabled for MAC80211
#

#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
# CONFIG_PNPACPI is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=y
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=y
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_VMWARE_BALLOON=y
CONFIG_BMP085=y
# CONFIG_PCH_PHUB is not set
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_DPT_I2O=y
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_GENERIC_NCR5380=y
CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=y
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_NCR53C406A=y
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_SYM53C416=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
# CONFIG_SCSI_T128 is not set
CONFIG_SCSI_U14_34F=y
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=y
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=y
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
# CONFIG_PATA_CS5535 is not set
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
# CONFIG_PATA_HPT3X2N is not set
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=y
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=y
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_NS87410=y
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_QDI is not set
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_WINBOND_VLB is not set

#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_MULTIPATH_QL is not set
CONFIG_DM_MULTIPATH_ST=y
CONFIG_DM_DELAY=y
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
CONFIG_FIREWIRE_SBP2=y
# CONFIG_FIREWIRE_NET is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
# CONFIG_I2O_CONFIG is not set
# CONFIG_I2O_BUS is not set
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_MACVLAN=y
# CONFIG_MACVTAP is not set
CONFIG_EQUALIZER=y
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
CONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
# CONFIG_ARCNET_COM90xx is not set
# CONFIG_ARCNET_COM90xxIO is not set
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
CONFIG_MII=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_BCM63XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_HAPPYMEAL=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=y
# CONFIG_3C515 is not set
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=y
# CONFIG_NI65 is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
# CONFIG_DM9102 is not set
CONFIG_ULI526X=y
CONFIG_AT1700=y
# CONFIG_DEPCA is not set
CONFIG_HP100=y
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
CONFIG_EEXPRESS=y
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
CONFIG_ETH16I=y
CONFIG_NE2000=y
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_AC3200=y
# CONFIG_KSZ884X_PCI is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_CS89x0 is not set
CONFIG_E100=y
CONFIG_FEALNX=y
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=y
CONFIG_SIS900=y
CONFIG_EPIC100=y
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
CONFIG_KS8851_MLL=y
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_SC92031=y
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=y
CONFIG_IGB=y
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
CONFIG_SKY2=y
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_CNIC=y
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=y
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_JME=y
CONFIG_STMMAC_ETH=y
# CONFIG_STMMAC_DA is not set
# CONFIG_STMMAC_DUAL_MAC is not set
CONFIG_PCH_GBE=y
# CONFIG_NETDEV_10000 is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
CONFIG_IBMOL=y
# CONFIG_IBMLS is not set
# CONFIG_3C359 is not set
CONFIG_TMS380TR=y
# CONFIG_TMSPCI is not set
CONFIG_SKISA=y
# CONFIG_PROTEON is not set
CONFIG_ABYSS=y
CONFIG_SMCTR=y
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_AIRO=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=y
CONFIG_USB_ZD1201=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=y
# CONFIG_HOSTAP_PCI is not set
# CONFIG_HOSTAP_CS is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_IPHETH=y
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_PCMCIA_PCNET=y
CONFIG_PCMCIA_NMCLAN=y
# CONFIG_PCMCIA_SMC91C92 is not set
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=y
CONFIG_PCMCIA_IBMTR=y
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_IEEE802154_DRIVERS is not set

#
# CAIF transport drivers
#
# CONFIG_CAIF_TTY is not set
# CONFIG_CAIF_SPI_SLAVE is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
# CONFIG_DEFXX_MMIO is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
# CONFIG_PPPOE is not set
CONFIG_PPTP=y
# CONFIG_PPPOATM is not set
CONFIG_PPPOL2TP=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
CONFIG_VMXNET3=y
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=y
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
# CONFIG_ISDN_CAPI_CAPI20 is not set

#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=y
# CONFIG_GIGASET_CAPI is not set
CONFIG_GIGASET_DUMMYLL=y
# CONFIG_GIGASET_BASE is not set
CONFIG_GIGASET_M105=y
# CONFIG_GIGASET_M101 is not set
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
CONFIG_KEYBOARD_LM8323=y
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_GTCO=y
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_DA9034=y
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_HTCPEN is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_QT602240=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_STMPE is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_APANEL=y
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_WINBOND_CIR=y
CONFIG_INPUT_PCF50633_PMU=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_WM831X_ON is not set
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
# CONFIG_ISI is not set
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
# CONFIG_N_HDLC is not set
CONFIG_N_GSM=y
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=y
CONFIG_STALDRV=y
CONFIG_STALLION=y
# CONFIG_ISTALLION is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=y
CONFIG_SERIAL_8250_ACCENT=y
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_IPWIRELESS=y
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_DA9030=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_CHARGER_PCF50633=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_PKGTEMP=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_SENSORS_APPLESMC=y
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
CONFIG_TPS6507X=y
# CONFIG_TWL4030_CORE is not set
CONFIG_MFD_STMPE=y
# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_AB3550_CORE is not set
CONFIG_LPC_SCH=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_JANZ_CMODIO=y
# CONFIG_MFD_VX855 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_STUB_POULSBO=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PROGEAR=y
CONFIG_BACKLIGHT_DA903X=y
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
CONFIG_BACKLIGHT_PCF50633=y

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_HWA_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=y
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=y
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
CONFIG_USB_SERIAL_MOS7840=y
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
# CONFIG_USB_SERIAL_QCAUX is not set
CONFIG_USB_SERIAL_QUALCOMM=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_HP4X=y
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SAMBA=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_SYMBOL=y
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_WWAN=y
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_YUREX is not set
CONFIG_USB_ATM=y
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_CXACRU is not set
CONFIG_USB_UEAGLEATM=y
# CONFIG_USB_XUSBATM is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_R8A66597=y
CONFIG_USB_R8A66597=y
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
# CONFIG_UWB_I1480U is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
# CONFIG_LEDS_ALIX2 is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_INFINIBAND_NES is not set
# CONFIG_INFINIBAND_IPOIB is not set
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
CONFIG_EDAC_E752X=y
# CONFIG_EDAC_I82875P is not set
CONFIG_EDAC_I82975X=y
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_I3200=y
CONFIG_EDAC_X38=y
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
CONFIG_EDAC_I5000=y
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_ISL12022=y
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=y
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_WM831X is not set
# CONFIG_RTC_DRV_PCF50633 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
# CONFIG_UIO_NETX is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_DELL_LAPTOP is not set
CONFIG_SENSORS_HDAPS=y
CONFIG_IBM_RTL=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_OCFS2_FS=y
# CONFIG_OCFS2_FS_O2CB is not set
# CONFIG_OCFS2_FS_USERSPACE_CLUSTER is not set
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_NILFS2_FS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
CONFIG_FSCACHE_OBJECT_LIST=y
# CONFIG_CACHEFILES is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_BKL is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_DETECTOR_RUNNABLE=y
CONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_CPU_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_SERIAL_CONSOLE is not set
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
# CONFIG_KGDB_KDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DOUBLEFAULT=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SELINUX is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="tomoyo"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_586=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
CONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_LGUEST is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=y
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y

Re: [boot crash] Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[Ingo Molnar]

* Ingo Molnar <mingo@elte.hu> wrote:

> FYI, either the x86/numa or the x86/bootmem changes cause the early boot crash 
> below. Config attached.

It's x86/bootmem, one of these commits:

3c417751e4f0: x86: Rename e820_table_* to pgt_buf_*
d7992231c148: x86-64: Move out cleanup higmap [_brk_end, _end) out of init_memory_mapping()
4645b6af9427: x86: Use early pre-allocated page table buffer top-down
1411e0ec3123: x86-64, numa: Put pgtable to local node memory
dbef7b56d2fc: x86-64, numa: Allocate memnodemap under max_pfn_mapped
45635ab5e41b: x86: Change get_max_mapped() to inline
1a4a678b12c8: memblock: Make find_memory_core_early() find from top-down
32e3f2b00c52: x86-64, gart: Fix allocation with memblock
4b239f458c22: x86-64, mm: Put early page table high

i'm excluding them from tip:master for now.

Thanks,

	Ingo

[build failure] Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 342 bytes --]


and x86/numa has this build failure:

arch/x86/mm/numa_64.c: In function ‘numa_set_cpumask’:
arch/x86/mm/numa_64.c:851:14: error: ‘physnodes’ undeclared (first use in this function)
arch/x86/mm/numa_64.c:851:14: note: each undeclared identifier is reported only once for each function it appears in

config attached.

Thanks,

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 67152 bytes --]

#
# Automatically generated make config: don't edit
# Linux/x86_64 2.6.37-rc8 Kernel Configuration
# Thu Dec 30 14:23:42 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_LZO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_AUTO_IRQ_AFFINITY is not set
# CONFIG_IRQ_PER_CPU is not set
# CONFIG_HARDIRQS_SW_RESEND is not set
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_SRCU_SYNCHRONIZE_DELAY=10
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y

#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
# CONFIG_KVM_CLOCK is not set
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
# CONFIG_GART_IOMMU is not set
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=4096
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
# CONFIG_PM is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
CONFIG_PCI_IOV=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_YENTA_O2 is not set
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
# CONFIG_IP_VS_PROTO_UDP is not set
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
# CONFIG_IP_VS_LC is not set
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
# CONFIG_IP_VS_LBLCR is not set
CONFIG_IP_VS_DH=m
# CONFIG_IP_VS_SH is not set
# CONFIG_IP_VS_SED is not set
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
# CONFIG_IP_VS_NFCT is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_CONNTRACK_IPV4 is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_FILTER is not set
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=m
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
# CONFIG_L2TP_ETH is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_PHONET_PIPECTRLR=y
CONFIG_IEEE802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_RPS=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRNET=m
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#
CONFIG_KINGSUN_DONGLE=m
# CONFIG_KSDAZZLE_DONGLE is not set
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
# CONFIG_BT_L2CAP is not set
CONFIG_BT_SCO=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIUART=m
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
CONFIG_BT_ATH3K=m
CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=m
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_LIB80211_DEBUG=y
# CONFIG_MAC80211 is not set

#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=y
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
# CONFIG_CAIF_NETDEV is not set
# CONFIG_CEPH_LIB is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_DRBD=m
CONFIG_DRBD_FAULT_INJECTION=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_LIBFC=m
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_SRP is not set
CONFIG_SCSI_BFA_FC=m
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
CONFIG_SATA_SVW=m
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=m
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CS5520 is not set
CONFIG_PATA_CS5530=m
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
# CONFIG_PATA_HPT3X2N is not set
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=m
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=m

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_RZ1000=m

#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=m
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
# CONFIG_I2O_BUS is not set
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=m
# CONFIG_ARCNET_COM90xx is not set
# CONFIG_ARCNET_COM90xxIO is not set
# CONFIG_ARCNET_RIM_I is not set
CONFIG_ARCNET_COM20020=m
# CONFIG_ARCNET_COM20020_PCI is not set
CONFIG_MII=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=m
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM63XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=m
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_HAPPYMEAL=m
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
CONFIG_ETHOC=m
CONFIG_DNET=m
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_KSZ884X_PCI is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R6040=m
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
CONFIG_SMSC9420=m
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_KS8851_MLL=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=y
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_QLA3XXX=m
# CONFIG_ATL1 is not set
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
CONFIG_JME=m
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_DA is not set
# CONFIG_STMMAC_DUAL_MAC is not set
CONFIG_PCH_GBE=m
CONFIG_NETDEV_10000=y
CONFIG_MDIO=m
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4_DEPENDS=y
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF_DEPENDS=y
# CONFIG_CHELSIO_T4VF is not set
CONFIG_ENIC=m
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
CONFIG_NIU=m
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not set
CONFIG_BNX2X=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
# CONFIG_BNA is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=m
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
CONFIG_AIRO_CS=m
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=m
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_HOSTAP=m
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_HOSTAP_PLX is not set
CONFIG_HOSTAP_PCI=m
# CONFIG_HOSTAP_CS is not set
# CONFIG_IPW2100 is not set
# CONFIG_LIBERTAS is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=m
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
# CONFIG_PCMCIA_IBMTR is not set
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
# CONFIG_HDLC_CISCO is not set
# CONFIG_HDLC_FR is not set
# CONFIG_HDLC_PPP is not set

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
CONFIG_WANXL=m
CONFIG_PC300TOO=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_WAN_ROUTER_DRIVERS is not set
# CONFIG_SBNI is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
# CONFIG_ATM_SOLOS is not set
# CONFIG_IEEE802154_DRIVERS is not set

#
# CAIF transport drivers
#
# CONFIG_CAIF_TTY is not set
# CONFIG_CAIF_SPI_SLAVE is not set
# CONFIG_FDDI is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
CONFIG_PPP_SYNC_TTY=m
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VMXNET3=m
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
# CONFIG_CAPI_TRACE is not set
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
CONFIG_ISDN_CAPI_CAPI20=m

#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
# CONFIG_CAPI_EICON is not set
# CONFIG_ISDN_DRV_GIGASET is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
# CONFIG_PHONE_IXJ_PCMCIA is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
CONFIG_MOUSE_PS2_ELANTECH=y
# CONFIG_MOUSE_PS2_SENTELIC is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=m
# CONFIG_JOYSTICK_GAMECON is not set
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=m
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
# CONFIG_TOUCHSCREEN_QT602240 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MFD_HSU=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_TIMBERDALE=m
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
CONFIG_R3964=m
CONFIG_APPLICOM=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_INTEL_MID=m
CONFIG_I2C_OCORES=m
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
CONFIG_PPS=m
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2431=m
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_BQ27000=m
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_WM8400=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
# CONFIG_PCF50633_GPIO is not set
# CONFIG_ABX500_CORE is not set
CONFIG_LPC_SCH=m
CONFIG_MFD_RDC321X=m
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_VX855=m
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
# CONFIG_IR_CORE is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
CONFIG_DVB_TTUSB_BUDGET=m
# CONFIG_DVB_TTUSB_DEC is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported SDMC DM1105 Adapters
#

#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set

#
# Supported Mantis Adapters
#

#
# Supported nGene Adapters
#
CONFIG_DVB_NGENE=m

#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
CONFIG_DVB_ZL10036=m
# CONFIG_DVB_ZL10039 is not set
# CONFIG_DVB_S5H1420 is not set
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
# CONFIG_DVB_STV0900 is not set
CONFIG_DVB_TDA8083=m
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_TDA8261 is not set
CONFIG_DVB_VES1X93=m
# CONFIG_DVB_TUNER_ITD1000 is not set
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
# CONFIG_DVB_DS3000 is not set
CONFIG_DVB_MB86A16=m

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
CONFIG_DVB_CX22700=m
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_S5H1432 is not set
# CONFIG_DVB_DRX397XD is not set
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_TDA1004X=m
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
# CONFIG_DVB_TDA10023 is not set
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
CONFIG_DVB_OR51132=m
# CONFIG_DVB_BCM3510 is not set
CONFIG_DVB_LGDT330X=m
# CONFIG_DVB_LGDT3305 is not set
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
# CONFIG_DVB_DIB8000 is not set

#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not set
CONFIG_DVB_TUNER_DIB0070=m
# CONFIG_DVB_TUNER_DIB0090 is not set

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
CONFIG_DVB_ISL6423=m
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=m
# CONFIG_DVB_ATBM8830 is not set
CONFIG_DVB_TDA665x=m
# CONFIG_DVB_IX2505V is not set

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_VIA is not set
# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
CONFIG_STUB_POULSBO=m
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=m
CONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=m
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=m
# CONFIG_FB_MB862XX_PCI_GDC is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PROGEAR=m
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
CONFIG_BACKLIGHT_SAHARA=m
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_PCF50633=m

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
# CONFIG_HID is not set

#
# USB Input Devices
#
# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
CONFIG_USB_MOUSE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=m
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=m
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=m
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
# CONFIG_USB_SERIAL_BELKIN is not set
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=m
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SAMBA is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=m
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_QIB=m
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_INFINIBAND_CXGB3 is not set
CONFIG_INFINIBAND_CXGB4=m
# CONFIG_MLX4_INFINIBAND is not set
CONFIG_INFINIBAND_NES=m
CONFIG_INFINIBAND_NES_DEBUG=y
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_SENSORS_HDAPS=m
CONFIG_IBM_RTL=m

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_DEBUG2=y
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=m
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
# CONFIG_ACORN_PARTITION_RISCIX is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_BKL=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_DETECTOR_RUNNABLE=y
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
CONFIG_BACKTRACE_SELF_TEST=m
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=m
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m

Re: [build failure] Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[David Rientjes]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 571 bytes --]

On Thu, 30 Dec 2010, Ingo Molnar wrote:

> 
> and x86/numa has this build failure:
> 
> arch/x86/mm/numa_64.c: In function ‘numa_set_cpumask’:
> arch/x86/mm/numa_64.c:851:14: error: ‘physnodes’ undeclared (first use in this function)
> arch/x86/mm/numa_64.c:851:14: note: each undeclared identifier is reported only once for each function it appears in
> 
> config attached.
> 

Yeah, you reported this one earlier and I sent a patch four days ago to 
fix it (http://marc.info/?l=linux-kernel&m=129340072128297).  I'll reply 
to this email with it again.

Thanks!

[patch] x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulation

[David Rientjes]

"x86, numa: Fake node-to-cpumask for NUMA emulation" broke the build when
CONFIG_DEBUG_PER_CPU_MAPS is set and CONFIG_NUMA_EMU is not.  This is
because it is possible to map a cpu to multiple nodes when NUMA emulation
is used; the patch required a physical node address table to find those
nodes that was only available when CONFIG_NUMA_EMU was enabled.

This extracts the common debug functionality to its own function for
CONFIG_DEBUG_PER_CPU_MAPS and uses it regardless of whether
CONFIG_NUMA_EMU is set or not.

NUMA emulation will now iterate over the set of possible nodes for each
cpu and call the new debug function whereas only the cpu's node will be
used without NUMA emulation enabled.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Rientjes <rientjes@google.com>
---
 arch/x86/mm/numa_64.c |   48 +++++++++++++++++++++++++++++++++++++-----------
 1 files changed, 37 insertions(+), 11 deletions(-)

diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -833,15 +833,48 @@ void __cpuinit numa_remove_cpu(int cpu)
 #endif /* !CONFIG_NUMA_EMU */
 
 #else /* CONFIG_DEBUG_PER_CPU_MAPS */
+static struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable)
+{
+	int node = early_cpu_to_node(cpu);
+	struct cpumask *mask;
+	char buf[64];
+
+	mask = node_to_cpumask_map[node];
+	if (!mask) {
+		pr_err("node_to_cpumask_map[%i] NULL\n", node);
+		dump_stack();
+		return NULL;
+	}
+
+	cpulist_scnprintf(buf, sizeof(buf), mask);
+	printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
+		enable ? "numa_add_cpu" : "numa_remove_cpu",
+		cpu, node, buf);
+	return mask;
+}
 
 /*
  * --------- debug versions of the numa functions ---------
  */
+#ifndef CONFIG_NUMA_EMU
+static void __cpuinit numa_set_cpumask(int cpu, int enable)
+{
+	struct cpumask *mask;
+
+	mask = debug_cpumask_set_cpu(cpu, enable);
+	if (!mask)
+		return;
+
+	if (enable)
+		cpumask_set_cpu(cpu, mask);
+	else
+		cpumask_clear_cpu(cpu, mask);
+}
+#else
 static void __cpuinit numa_set_cpumask(int cpu, int enable)
 {
 	int node = early_cpu_to_node(cpu);
 	struct cpumask *mask;
-	char buf[64];
 	int i;
 
 	for_each_online_node(i) {
@@ -851,24 +884,17 @@ static void __cpuinit numa_set_cpumask(int cpu, int enable)
 		if (addr < physnodes[node].start ||
 					addr >= physnodes[node].end)
 			continue;
-		mask = node_to_cpumask_map[node];
-		if (mask == NULL) {
-			pr_err("node_to_cpumask_map[%i] NULL\n", i);
-			dump_stack();
+		mask = debug_cpumask_set_cpu(cpu, enable);
+		if (!mask)
 			return;
-		}
 
 		if (enable)
 			cpumask_set_cpu(cpu, mask);
 		else
 			cpumask_clear_cpu(cpu, mask);
-
-		cpulist_scnprintf(buf, sizeof(buf), mask);
-		printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
-			enable ? "numa_add_cpu" : "numa_remove_cpu",
-			cpu, node, buf);
 	}
 }
+#endif /* CONFIG_NUMA_EMU */
 
 void __cpuinit numa_add_cpu(int cpu)
 {

Re: [boot crash] Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[Yinghai Lu]

On Thu, Dec 30, 2010 at 2:30 AM, Ingo Molnar <mingo@elte.hu> wrote:
>
> * Ingo Molnar <mingo@elte.hu> wrote:
>
>> FYI, either the x86/numa or the x86/bootmem changes cause the early boot crash
>> below. Config attached.
>
> It's x86/bootmem, one of these commits:
>
> 3c417751e4f0: x86: Rename e820_table_* to pgt_buf_*
> d7992231c148: x86-64: Move out cleanup higmap [_brk_end, _end) out of init_memory_mapping()
> 4645b6af9427: x86: Use early pre-allocated page table buffer top-down
> 1411e0ec3123: x86-64, numa: Put pgtable to local node memory
> dbef7b56d2fc: x86-64, numa: Allocate memnodemap under max_pfn_mapped
> 45635ab5e41b: x86: Change get_max_mapped() to inline
> 1a4a678b12c8: memblock: Make find_memory_core_early() find from top-down
> 32e3f2b00c52: x86-64, gart: Fix allocation with memblock
> 4b239f458c22: x86-64, mm: Put early page table high
>
> i'm excluding them from tip:master for now.

caused by
4645b6af9427: x86: Use early pre-allocated page table buffer top-down

32 bit fixmap will use the pre-allocated range too. it needs range to
be continuous...

please drop
4645b6af9427: x86: Use early pre-allocated page table buffer top-down
3c417751e4f0: x86: Rename e820_table_* to pgt_buf_*

and will send out new version of

 x86: Rename e820_table_* to pgt_buf_*

Thanks

Yinghai

[PATCH -v2 6/6] x86: Rename e820_table_* to pgt_buf_*

[Yinghai Lu]

Now it is found from memblock way.

Change the name to purpose related.

-v2: Ingo found "4/6 x86: Use early pre-allocated page table buffer top-down"
     cause 32bit crash.
     and need to drop it, So update this one accordingly.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/include/asm/init.h |    6 +++---
 arch/x86/mm/init.c          |   20 ++++++++++----------
 arch/x86/mm/init_32.c       |    8 ++++----
 arch/x86/mm/init_64.c       |    4 ++--
 arch/x86/xen/mmu.c          |    2 +-
 5 files changed, 20 insertions(+), 20 deletions(-)

Index: linux-2.6/arch/x86/include/asm/init.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/init.h
+++ linux-2.6/arch/x86/include/asm/init.h
@@ -11,8 +11,8 @@ kernel_physical_mapping_init(unsigned lo
 			     unsigned long page_size_mask);
 
 
-extern unsigned long __initdata e820_table_start;
-extern unsigned long __meminitdata e820_table_end;
-extern unsigned long __meminitdata e820_table_top;
+extern unsigned long __initdata pgt_buf_start;
+extern unsigned long __meminitdata pgt_buf_end;
+extern unsigned long __meminitdata pgt_buf_top;
 
 #endif /* _ASM_X86_INIT_32_H */
Index: linux-2.6/arch/x86/mm/init.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init.c
+++ linux-2.6/arch/x86/mm/init.c
@@ -18,9 +18,9 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-unsigned long __initdata e820_table_start;
-unsigned long __meminitdata e820_table_end;
-unsigned long __meminitdata e820_table_top;
+unsigned long __initdata pgt_buf_start;
+unsigned long __meminitdata pgt_buf_end;
+unsigned long __meminitdata pgt_buf_top;
 
 int after_bootmem;
 
@@ -73,12 +73,12 @@ static void __init find_early_table_spac
 	if (base == MEMBLOCK_ERROR)
 		panic("Cannot find space for the kernel page tables");
 
-	e820_table_start = base >> PAGE_SHIFT;
-	e820_table_end = e820_table_start;
-	e820_table_top = e820_table_start + (tables >> PAGE_SHIFT);
+	pgt_buf_start = base >> PAGE_SHIFT;
+	pgt_buf_end = pgt_buf_start;
+	pgt_buf_top = pgt_buf_start + (tables >> PAGE_SHIFT);
 
 	printk(KERN_DEBUG "kernel direct mapping tables up to %lx @ %lx-%lx\n",
-		end, e820_table_start << PAGE_SHIFT, e820_table_top << PAGE_SHIFT);
+		end, pgt_buf_start << PAGE_SHIFT, pgt_buf_top << PAGE_SHIFT);
 }
 
 struct map_range {
@@ -272,9 +272,9 @@ unsigned long __init_refok init_memory_m
 
 	__flush_tlb_all();
 
-	if (!after_bootmem && e820_table_end > e820_table_start)
-		memblock_x86_reserve_range(e820_table_start << PAGE_SHIFT,
-				 e820_table_end << PAGE_SHIFT, "PGTABLE");
+	if (!after_bootmem && pgt_buf_end > pgt_buf_start)
+		memblock_x86_reserve_range(pgt_buf_start << PAGE_SHIFT,
+				 pgt_buf_end << PAGE_SHIFT, "PGTABLE");
 
 	if (!after_bootmem)
 		early_memtest(start, end);
Index: linux-2.6/arch/x86/mm/init_32.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_32.c
+++ linux-2.6/arch/x86/mm/init_32.c
@@ -61,10 +61,10 @@ bool __read_mostly __vmalloc_start_set =
 
 static __init void *alloc_low_page(void)
 {
-	unsigned long pfn = e820_table_end++;
+	unsigned long pfn = pgt_buf_end++;
 	void *adr;
 
-	if (pfn >= e820_table_top)
+	if (pfn >= pgt_buf_top)
 		panic("alloc_low_page: ran out of memory");
 
 	adr = __va(pfn * PAGE_SIZE);
@@ -162,8 +162,8 @@ static pte_t *__init page_table_kmap_che
 	if (pmd_idx_kmap_begin != pmd_idx_kmap_end
 	    && (vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin
 	    && (vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end
-	    && ((__pa(pte) >> PAGE_SHIFT) < e820_table_start
-		|| (__pa(pte) >> PAGE_SHIFT) >= e820_table_end)) {
+	    && ((__pa(pte) >> PAGE_SHIFT) < pgt_buf_start
+		|| (__pa(pte) >> PAGE_SHIFT) >= pgt_buf_end)) {
 		pte_t *newpte;
 		int i;
 
Index: linux-2.6/arch/x86/mm/init_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/init_64.c
+++ linux-2.6/arch/x86/mm/init_64.c
@@ -314,7 +314,7 @@ void __init cleanup_highmap(void)
 
 static __ref void *alloc_low_page(unsigned long *phys)
 {
-	unsigned long pfn = e820_table_end++;
+	unsigned long pfn = pgt_buf_end++;
 	void *adr;
 
 	if (after_bootmem) {
@@ -324,7 +324,7 @@ static __ref void *alloc_low_page(unsign
 		return adr;
 	}
 
-	if (pfn >= e820_table_top)
+	if (pfn >= pgt_buf_top)
 		panic("alloc_low_page: ran out of memory");
 
 	adr = early_memremap(pfn * PAGE_SIZE, PAGE_SIZE);
Index: linux-2.6/arch/x86/xen/mmu.c
===================================================================
--- linux-2.6.orig/arch/x86/xen/mmu.c
+++ linux-2.6/arch/x86/xen/mmu.c
@@ -1807,7 +1807,7 @@ static __init pte_t mask_rw_pte(pte_t *p
 	 * early_ioremap fixmap slot, make sure it is RO.
 	 */
 	if (!is_early_ioremap_ptep(ptep) &&
-	    pfn >= e820_table_start && pfn < e820_table_end)
+	    pfn >= pgt_buf_start && pfn < pgt_buf_end)
 		pte = pte_wrprotect(pte);
 
 	return pte;

Re: [boot crash] Re: [PATCH -v2 3/6] x86, 64bit, numa: Put pgtable to local node memory

[Yinghai Lu]

On 01/05/2011 05:44 AM, Ingo Molnar wrote:
> 
> * Yinghai Lu <yinghai@kernel.org> wrote:
> 
>>>> i'm excluding them from tip:master for now.
>>>
>>> caused by
>>> 4645b6af9427: x86: Use early pre-allocated page table buffer top-down
>>>
>>> 32 bit fixmap will use the pre-allocated range too. it needs range to
>>> be continuous...
>>>
>>> please drop
>>> 4645b6af9427: x86: Use early pre-allocated page table buffer top-down
>>> 3c417751e4f0: x86: Rename e820_table_* to pgt_buf_*
>>>
>>> and will send out new version of
>>>
>>>  x86: Rename e820_table_* to pgt_buf_*
>>
>> Please drop
>>  4645b6af9427: x86: Use early pre-allocated page table buffer top-down
>>  3c417751e4f0: x86: Rename e820_table_* to pgt_buf_*
>>
>> from tip/x86/bootmem
> 
> It still crashes on a testbox with:
> 
>  This costs you 64 MB of RAM
>  Cannot allocate aperture memory hole (0,65536K)
>  Kernel panic - not syncing: Not enough memory for aperture
>  Rebooting in 1 seconds..Press any key to enter the menu
> 
> full bootlog attached further below. Config attached.
> 
> Thanks,
> 
> 	Ingo
> 
> ----------->
> Linux version 2.6.37-tip-01872-gcdb5c00-dirty (mingo@sirius) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #80266 SMP PREEMPT Wed Jan 5 15:49:23 CET 2011
> Command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
>  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
>  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
>  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> bootconsole [earlyser0] enabled
> debug: ignoring loglevel setting.
> NX (Execute Disable) protection: active
> DMI 2.3 present.
> DMI: A8N-E/System Product Name, BIOS ASUS A8N-E ACPI BIOS Revision 1008 08/22/2005
> e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> No AGP bridge found
> last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
> MTRR default type: uncachable
> MTRR fixed ranges enabled:
>   00000-9FFFF write-back
>   A0000-BFFFF uncachable
>   C0000-C7FFF write-protect
>   C8000-FFFFF uncachable
> MTRR variable ranges enabled:
>   0 base 0000000000 mask FFC0000000 write-back
>   1 disabled
>   2 disabled
>   3 disabled
>   4 disabled
>   5 disabled
>   6 disabled
>   7 disabled
> found SMP MP-table at [ffff8800000f5680] f5680
> initial memory mapped : 0 - 20000000
> init_memory_mapping: 0000000000000000-000000003fff0000
>  0000000000 - 003fe00000 page 2M
>  003fe00000 - 003fff0000 page 4k
> kernel direct mapping tables up to 3fff0000 @ 3ffed000-3fff0000
> Scanning NUMA topology in Northbridge 24
> No NUMA configuration found
> Faking a node at 0000000000000000-000000003fff0000
> Initmem setup node 0 0000000000000000-000000003fff0000
>   NODE_DATA [000000003ffde000 - 000000003ffecfff]
>  [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
> Zone PFN ranges:
>   DMA      0x00000010 -> 0x00001000
>   DMA32    0x00001000 -> 0x00100000
>   Normal   empty
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
>     0: 0x00000010 -> 0x0000009f
>     0: 0x00000100 -> 0x0003fff0
> On node 0 totalpages: 262015
>   DMA zone: 56 pages used for memmap
>   DMA zone: 2 pages reserved
>   DMA zone: 3925 pages, LIFO batch:0
>   DMA32 zone: 3528 pages used for memmap
>   DMA32 zone: 254504 pages, LIFO batch:31
> Intel MultiProcessor Specification v1.4
> MPTABLE: OEM ID: OEM00000
> MPTABLE: Product ID: PROD00000000
> MPTABLE: APIC at: 0xFEE00000
> Processor #0 (Bootup-CPU)
> Processor #1
> IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> Processors: 2
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> nr_irqs_gsi: 40
> Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
> Booting paravirtualized kernel on bare hardware
> setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
> PERCPU: Embedded 474 pages/cpu @ffff88003fa00000 s1918808 r0 d22696 u2097152
> pcpu-alloc: s1918808 r0 d22696 u2097152 alloc=1*2097152
> pcpu-alloc: [0] 0 [0] 1 
> Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258429
> Policy zone: DMA32
> Kernel command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
> sysrq: sysrq always enabled.
> PID hash table entries: 4096 (order: 3, 32768 bytes)
> Checking aperture...
> No AGP bridge found
> Node 0: aperture @ 38000000 size 32 MB
> Aperture pointing to e820 RAM. Ignoring.
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Cannot allocate aperture memory hole (0,65536K)
> Kernel panic - not syncing: Not enough memory for aperture
> Rebooting in 1 seconds..Press any key to enter the menu
> 

ok, config has

CONFIG_IOMMU_DEBUG=y

so will have force_iommu on, then i will try to allocate 64M RAM under 4G for aper.

somehow
+	addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
+	if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
+		printk(KERN_ERR
+			"Cannot allocate aperture memory hole (%lx,%uK)\n",
+				addr, aper_size>>10);
+		return 0;
+	}
+	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64");

memblock_find_in_range can not find under 4G...

and there is something wrong with memblock code....

please apply following patch before tip/x86/bootmem...

Thanks

Yinghai


[PATCH] memblock: Don't adjust size in memblock_find_base()

While applying patch to use memblock to find aperture for 64bit x86.
Ingo found system with 1g + force_iommu

> No AGP bridge found
> Node 0: aperture @ 38000000 size 32 MB
> Aperture pointing to e820 RAM. Ignoring.
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Cannot allocate aperture memory hole (0,65536K)

the corresponding code:
	addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
	if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
		printk(KERN_ERR
			"Cannot allocate aperture memory hole (%lx,%uK)\n",
				addr, aper_size>>10);
		return 0;
	}
	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64")

it failes because memblock core code align the size with 512M. that could make
size way too big.

So don't align the size in that case.

acctually __memblock_alloc_base, the another caller already align that before calling that function.

BTW. x86 does not use __memblock_alloc_base...

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 mm/memblock.c |    2 --
 1 file changed, 2 deletions(-)

Index: linux-2.6/mm/memblock.c
===================================================================
--- linux-2.6.orig/mm/memblock.c
+++ linux-2.6/mm/memblock.c
@@ -137,8 +137,6 @@ static phys_addr_t __init_memblock membl
 
 	BUG_ON(0 == size);
 
-	size = memblock_align_up(size, align);
-
 	/* Pump up max_addr */
 	if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
 		end = memblock.current_limit;

Re: [patch] x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulation

[David Rientjes]

On Thu, 30 Dec 2010, David Rientjes wrote:

> "x86, numa: Fake node-to-cpumask for NUMA emulation" broke the build when
> CONFIG_DEBUG_PER_CPU_MAPS is set and CONFIG_NUMA_EMU is not.  This is
> because it is possible to map a cpu to multiple nodes when NUMA emulation
> is used; the patch required a physical node address table to find those
> nodes that was only available when CONFIG_NUMA_EMU was enabled.
> 
> This extracts the common debug functionality to its own function for
> CONFIG_DEBUG_PER_CPU_MAPS and uses it regardless of whether
> CONFIG_NUMA_EMU is set or not.
> 
> NUMA emulation will now iterate over the set of possible nodes for each
> cpu and call the new debug function whereas only the cpu's node will be
> used without NUMA emulation enabled.
> 
> Reported-by: Ingo Molnar <mingo@elte.hu>
> Signed-off-by: David Rientjes <rientjes@google.com>

Ingo, do you know what the status of this fix is?  It's required for 
x86/numa to build and I'd hate to see all of this fixes miss .38 because 
of this failure.

Re: [patch] x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulation

[Yinghai Lu]

On 01/06/2011 12:39 PM, David Rientjes wrote:
> On Thu, 30 Dec 2010, David Rientjes wrote:
> 
>> "x86, numa: Fake node-to-cpumask for NUMA emulation" broke the build when
>> CONFIG_DEBUG_PER_CPU_MAPS is set and CONFIG_NUMA_EMU is not.  This is
>> because it is possible to map a cpu to multiple nodes when NUMA emulation
>> is used; the patch required a physical node address table to find those
>> nodes that was only available when CONFIG_NUMA_EMU was enabled.
>>
>> This extracts the common debug functionality to its own function for
>> CONFIG_DEBUG_PER_CPU_MAPS and uses it regardless of whether
>> CONFIG_NUMA_EMU is set or not.
>>
>> NUMA emulation will now iterate over the set of possible nodes for each
>> cpu and call the new debug function whereas only the cpu's node will be
>> used without NUMA emulation enabled.
>>
>> Reported-by: Ingo Molnar <mingo@elte.hu>
>> Signed-off-by: David Rientjes <rientjes@google.com>
> 
> Ingo, do you know what the status of this fix is?  It's required for 
> x86/numa to build and I'd hate to see all of this fixes miss .38 because 
> of this failure.

If x86/numa would not be pushed to Linus. x86/apic-cleanups should be pushed at first.
or Thomas will take care of it?

Thanks

Yinghai

Re: [patch] x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulation

[David Rientjes]

On Thu, 6 Jan 2011, Yinghai Lu wrote:

> >> "x86, numa: Fake node-to-cpumask for NUMA emulation" broke the build when
> >> CONFIG_DEBUG_PER_CPU_MAPS is set and CONFIG_NUMA_EMU is not.  This is
> >> because it is possible to map a cpu to multiple nodes when NUMA emulation
> >> is used; the patch required a physical node address table to find those
> >> nodes that was only available when CONFIG_NUMA_EMU was enabled.
> >>
> >> This extracts the common debug functionality to its own function for
> >> CONFIG_DEBUG_PER_CPU_MAPS and uses it regardless of whether
> >> CONFIG_NUMA_EMU is set or not.
> >>
> >> NUMA emulation will now iterate over the set of possible nodes for each
> >> cpu and call the new debug function whereas only the cpu's node will be
> >> used without NUMA emulation enabled.
> >>
> >> Reported-by: Ingo Molnar <mingo@elte.hu>
> >> Signed-off-by: David Rientjes <rientjes@google.com>
> > 
> > Ingo, do you know what the status of this fix is?  It's required for 
> > x86/numa to build and I'd hate to see all of this fixes miss .38 because 
> > of this failure.
> 
> If x86/numa would not be pushed to Linus. x86/apic-cleanups should be pushed at first.
> or Thomas will take care of it?
> 

x86/apic-cleanups was merged in x86/numa, so it can be pushed regardless 
of whether x86/numa will make it upstream in this cycle or not (Peter said 
it was on target for .38, but this patch has been dormant for a couple 
weeks).

[tip:x86/numa] x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulation

[tip-bot for David Rientjes]

Commit-ID:  d906f0eb2f0e6d1a24c479f69a9c39e7e45c5ae8
Gitweb:     http://git.kernel.org/tip/d906f0eb2f0e6d1a24c479f69a9c39e7e45c5ae8
Author:     David Rientjes <rientjes@google.com>
AuthorDate: Thu, 30 Dec 2010 10:54:16 -0800
Committer:  Ingo Molnar <mingo@elte.hu>
CommitDate: Fri, 7 Jan 2011 14:09:34 +0100

x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulation

"x86, numa: Fake node-to-cpumask for NUMA emulation" broke the
build when CONFIG_DEBUG_PER_CPU_MAPS is set and CONFIG_NUMA_EMU
is not.  This is because it is possible to map a cpu to multiple
nodes when NUMA emulation is used; the patch required a physical
node address table to find those nodes that was only available
when CONFIG_NUMA_EMU was enabled.

This extracts the common debug functionality to its own function
for CONFIG_DEBUG_PER_CPU_MAPS and uses it regardless of whether
CONFIG_NUMA_EMU is set or not.

NUMA emulation will now iterate over the set of possible nodes
for each cpu and call the new debug function whereas only the
cpu's node will be used without NUMA emulation enabled.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <alpine.DEB.2.00.1012301053590.12995@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/numa_64.c |   48 +++++++++++++++++++++++++++++++++++++-----------
 1 files changed, 37 insertions(+), 11 deletions(-)

diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 3d73201..1e72102 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -833,15 +833,48 @@ void __cpuinit numa_remove_cpu(int cpu)
 #endif /* !CONFIG_NUMA_EMU */
 
 #else /* CONFIG_DEBUG_PER_CPU_MAPS */
+static struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable)
+{
+	int node = early_cpu_to_node(cpu);
+	struct cpumask *mask;
+	char buf[64];
+
+	mask = node_to_cpumask_map[node];
+	if (!mask) {
+		pr_err("node_to_cpumask_map[%i] NULL\n", node);
+		dump_stack();
+		return NULL;
+	}
+
+	cpulist_scnprintf(buf, sizeof(buf), mask);
+	printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
+		enable ? "numa_add_cpu" : "numa_remove_cpu",
+		cpu, node, buf);
+	return mask;
+}
 
 /*
  * --------- debug versions of the numa functions ---------
  */
+#ifndef CONFIG_NUMA_EMU
+static void __cpuinit numa_set_cpumask(int cpu, int enable)
+{
+	struct cpumask *mask;
+
+	mask = debug_cpumask_set_cpu(cpu, enable);
+	if (!mask)
+		return;
+
+	if (enable)
+		cpumask_set_cpu(cpu, mask);
+	else
+		cpumask_clear_cpu(cpu, mask);
+}
+#else
 static void __cpuinit numa_set_cpumask(int cpu, int enable)
 {
 	int node = early_cpu_to_node(cpu);
 	struct cpumask *mask;
-	char buf[64];
 	int i;
 
 	for_each_online_node(i) {
@@ -851,24 +884,17 @@ static void __cpuinit numa_set_cpumask(int cpu, int enable)
 		if (addr < physnodes[node].start ||
 					addr >= physnodes[node].end)
 			continue;
-		mask = node_to_cpumask_map[node];
-		if (mask == NULL) {
-			pr_err("node_to_cpumask_map[%i] NULL\n", i);
-			dump_stack();
+		mask = debug_cpumask_set_cpu(cpu, enable);
+		if (!mask)
 			return;
-		}
 
 		if (enable)
 			cpumask_set_cpu(cpu, mask);
 		else
 			cpumask_clear_cpu(cpu, mask);
-
-		cpulist_scnprintf(buf, sizeof(buf), mask);
-		printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
-			enable ? "numa_add_cpu" : "numa_remove_cpu",
-			cpu, node, buf);
 	}
 }
+#endif /* CONFIG_NUMA_EMU */
 
 void __cpuinit numa_add_cpu(int cpu)
 {

[PATCH] memblock: Don't adjust size in memblock_find_base()

[Yinghai Lu]

While applying patch to use memblock to find aperture for 64bit x86.
Ingo found system with 1g + force_iommu

> No AGP bridge found
> Node 0: aperture @ 38000000 size 32 MB
> Aperture pointing to e820 RAM. Ignoring.
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Cannot allocate aperture memory hole (0,65536K)

the corresponding code:
	addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
	if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
		printk(KERN_ERR
			"Cannot allocate aperture memory hole (%lx,%uK)\n",
				addr, aper_size>>10);
		return 0;
	}
	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64")

it fails because memblock core code align the size with 512M. that could make
size way too big.

So don't align the size in that case.

actually __memblock_alloc_base, the another caller already align that before calling that function.

BTW. x86 does not use __memblock_alloc_base...

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 mm/memblock.c |    2 --
 1 file changed, 2 deletions(-)

Index: linux-2.6/mm/memblock.c
===================================================================
--- linux-2.6.orig/mm/memblock.c
+++ linux-2.6/mm/memblock.c
@@ -137,8 +137,6 @@ static phys_addr_t __init_memblock membl
 
 	BUG_ON(0 == size);
 
-	size = memblock_align_up(size, align);
-
 	/* Pump up max_addr */
 	if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
 		end = memblock.current_limit;

Re: [PATCH] memblock: Don't adjust size in memblock_find_base()

[Benjamin Herrenschmidt]

On Fri, 2011-01-07 at 12:41 -0800, Yinghai Lu wrote:
> While applying patch to use memblock to find aperture for 64bit x86.
> Ingo found system with 1g + force_iommu

Please run that through DaveM. I seem to remember that he relies on the
size alignment to ensure that a lot of tiny allocations get properly
coalesced or he runs out of regions at boot time.

A better option would be to use a fixed alignment, or sized based but
with a max threshold such as PAGE_SIZE.

Cheers,
Ben.

> > No AGP bridge found
> > Node 0: aperture @ 38000000 size 32 MB
> > Aperture pointing to e820 RAM. Ignoring.
> > Your BIOS doesn't leave a aperture memory hole
> > Please enable the IOMMU option in the BIOS setup
> > This costs you 64 MB of RAM
> > Cannot allocate aperture memory hole (0,65536K)
> 
> the corresponding code:
> 	addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
> 	if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
> 		printk(KERN_ERR
> 			"Cannot allocate aperture memory hole (%lx,%uK)\n",
> 				addr, aper_size>>10);
> 		return 0;
> 	}
> 	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64")
> 
> it fails because memblock core code align the size with 512M. that could make
> size way too big.
> 
> So don't align the size in that case.
> 
> actually __memblock_alloc_base, the another caller already align that before calling that function.
> 
> BTW. x86 does not use __memblock_alloc_base...
> 
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> 
> ---
>  mm/memblock.c |    2 --
>  1 file changed, 2 deletions(-)
> 
> Index: linux-2.6/mm/memblock.c
> ===================================================================
> --- linux-2.6.orig/mm/memblock.c
> +++ linux-2.6/mm/memblock.c
> @@ -137,8 +137,6 @@ static phys_addr_t __init_memblock membl
>  
>  	BUG_ON(0 == size);
>  
> -	size = memblock_align_up(size, align);
> -
>  	/* Pump up max_addr */
>  	if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
>  		end = memblock.current_limit;
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: [PATCH] memblock: Don't adjust size in memblock_find_base()

[Yinghai Lu]

On 01/09/2011 09:56 PM, Benjamin Herrenschmidt wrote:
> On Fri, 2011-01-07 at 12:41 -0800, Yinghai Lu wrote:
>> While applying patch to use memblock to find aperture for 64bit x86.
>> Ingo found system with 1g + force_iommu
> 
> Please run that through DaveM. I seem to remember that he relies on the
> size alignment to ensure that a lot of tiny allocations get properly
> coalesced or he runs out of regions at boot time.

should be safe, the path that DaveM need, still have those size alignment applied.

Thanks

Yinghai

Re: [PATCH] memblock: Don't adjust size in memblock_find_base()

[Yinghai Lu]

On 01/09/2011 09:56 PM, Benjamin Herrenschmidt wrote:
> On Fri, 2011-01-07 at 12:41 -0800, Yinghai Lu wrote:
>> While applying patch to use memblock to find aperture for 64bit x86.
>> Ingo found system with 1g + force_iommu
> 
> Please run that through DaveM. I seem to remember that he relies on the
> size alignment to ensure that a lot of tiny allocations get properly
> coalesced or he runs out of regions at boot time.

David, can you check this patch on sparc?

[PATCH] memblock: Don't adjust size in memblock_find_base()

While applying patch to use memblock to find aperture for 64bit x86.
Ingo found system with 1g + force_iommu

> No AGP bridge found
> Node 0: aperture @ 38000000 size 32 MB
> Aperture pointing to e820 RAM. Ignoring.
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Cannot allocate aperture memory hole (0,65536K)

the corresponding code:
	addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
	if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
		printk(KERN_ERR
			"Cannot allocate aperture memory hole (%lx,%uK)\n",
				addr, aper_size>>10);
		return 0;
	}
	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64")

it failes because memblock core code align the size with 512M. that could make
size way too big.

So don't align the size in that case.

acctually __memblock_alloc_base, the another caller already align that before calling that function.

BTW. x86 does not use __memblock_alloc_base...

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 mm/memblock.c |    2 --
 1 file changed, 2 deletions(-)

Index: linux-2.6/mm/memblock.c
===================================================================
--- linux-2.6.orig/mm/memblock.c
+++ linux-2.6/mm/memblock.c
@@ -137,8 +137,6 @@ static phys_addr_t __init_memblock membl
 
 	BUG_ON(0 == size);
 
-	size = memblock_align_up(size, align);
-
 	/* Pump up max_addr */
 	if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
 		end = memblock.current_limit;

[PATCH - resend] memblock: Don't adjust size in memblock_find_base()

[Yinghai Lu]

While applying patch to use memblock to find aperture for 64bit x86.
Ingo found system with 1g + force_iommu

> No AGP bridge found
> Node 0: aperture @ 38000000 size 32 MB
> Aperture pointing to e820 RAM. Ignoring.
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Cannot allocate aperture memory hole (0,65536K)

the corresponding code:
	addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
	if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
		printk(KERN_ERR
			"Cannot allocate aperture memory hole (%lx,%uK)\n",
				addr, aper_size>>10);
		return 0;
	}
	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64")

it fails because memblock core code align the size with 512M. that could make
size way too big.

So don't align the size in that case.

actually __memblock_alloc_base, the another caller already align that before calling that function.

BTW. x86 does not use __memblock_alloc_base...

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 mm/memblock.c |    2 --
 1 file changed, 2 deletions(-)

Index: linux-2.6/mm/memblock.c
===================================================================
--- linux-2.6.orig/mm/memblock.c
+++ linux-2.6/mm/memblock.c
@@ -137,8 +137,6 @@ static phys_addr_t __init_memblock membl
 
 	BUG_ON(0 == size);
 
-	size = memblock_align_up(size, align);
-
 	/* Pump up max_addr */
 	if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
 		end = memblock.current_limit;

Re: [PATCH - resend] memblock: Don't adjust size in memblock_find_base()

[Andrew Morton]

On Fri, 28 Jan 2011 16:37:47 -0800
Yinghai Lu <yinghai@kernel.org> wrote:

> 
> While applying patch to use memblock to find aperture for 64bit x86.
> Ingo found system with 1g + force_iommu
> 
> > No AGP bridge found
> > Node 0: aperture @ 38000000 size 32 MB
> > Aperture pointing to e820 RAM. Ignoring.
> > Your BIOS doesn't leave a aperture memory hole
> > Please enable the IOMMU option in the BIOS setup
> > This costs you 64 MB of RAM
> > Cannot allocate aperture memory hole (0,65536K)

I'm trying to work out if we should backport this fix into earlier
kernels and as is often the case, I wasn't given enough information.

What are the end-user visible effects of this?  The kernel cannot use
the AGP bridge?  64MB of RAM wasted?  Something else?

Re: [PATCH - resend] memblock: Don't adjust size in memblock_find_base()

[Yinghai Lu]

On 02/03/2011 12:25 PM, Andrew Morton wrote:
> On Fri, 28 Jan 2011 16:37:47 -0800
> Yinghai Lu <yinghai@kernel.org> wrote:
> 
>>
>> While applying patch to use memblock to find aperture for 64bit x86.
>> Ingo found system with 1g + force_iommu
>>
>>> No AGP bridge found
>>> Node 0: aperture @ 38000000 size 32 MB
>>> Aperture pointing to e820 RAM. Ignoring.
>>> Your BIOS doesn't leave a aperture memory hole
>>> Please enable the IOMMU option in the BIOS setup
>>> This costs you 64 MB of RAM
>>> Cannot allocate aperture memory hole (0,65536K)
> 
> I'm trying to work out if we should backport this fix into earlier
> kernels and as is often the case, I wasn't given enough information.
> 
> What are the end-user visible effects of this?  The kernel cannot use
> the AGP bridge?  64MB of RAM wasted?  Something else?

that is needed for further cleanup memblock with x86.

http://git.kernel.org/?p=linux/kernel/git/tip/linux-2.6-tip.git;a=shortlog;h=refs/heads/x86/bootmem

but it triggers another old bug in core memblock on one Ingo test machine. (with 1g ram but have iommu forced set for debug)
end-user is not supposed to have this conf.

Thanks

Yinghai

[tip:x86/mm] x86: Change get_max_mapped() to inline

[tip-bot for Yinghai Lu]

Commit-ID:  45635ab5e41bcde94a82f9a05d660ef77fe38c1b
Gitweb:     http://git.kernel.org/tip/45635ab5e41bcde94a82f9a05d660ef77fe38c1b
Author:     Yinghai Lu <yinghai@kernel.org>
AuthorDate: Mon, 27 Dec 2010 16:47:54 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 29 Dec 2010 15:47:55 -0800

x86: Change get_max_mapped() to inline

Move it into head file. to prepare use it in other files.

[ hpa: added missing <linux/types.h> and changed type to phys_addr_t. ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933BA.8000508@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/page_types.h |    6 ++++++
 arch/x86/kernel/setup.c           |    9 ---------
 2 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 1df6621..93626e6 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -2,6 +2,7 @@
 #define _ASM_X86_PAGE_DEFS_H
 
 #include <linux/const.h>
+#include <linux/types.h>
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT	12
@@ -45,6 +46,11 @@ extern int devmem_is_allowed(unsigned long pagenr);
 extern unsigned long max_low_pfn_mapped;
 extern unsigned long max_pfn_mapped;
 
+static inline phys_addr_t get_max_mapped(void)
+{
+	return (phys_addr_t)max_pfn_mapped << PAGE_SHIFT;
+}
+
 extern unsigned long init_memory_mapping(unsigned long start,
 					 unsigned long end);
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index df172c1..3def8c9 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -669,15 +669,6 @@ static int __init parse_reservelow(char *p)
 
 early_param("reservelow", parse_reservelow);
 
-static u64 __init get_max_mapped(void)
-{
-	u64 end = max_pfn_mapped;
-
-	end <<= PAGE_SHIFT;
-
-	return end;
-}
-
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures

[tip:x86/mm] x86-64, numa: Allocate memnodemap under max_pfn_mapped

[tip-bot for Yinghai Lu]

Commit-ID:  dbef7b56d2fc5115f26f72a0b080283bbf972cab
Gitweb:     http://git.kernel.org/tip/dbef7b56d2fc5115f26f72a0b080283bbf972cab
Author:     Yinghai Lu <yinghai@kernel.org>
AuthorDate: Mon, 27 Dec 2010 16:48:08 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 29 Dec 2010 15:48:08 -0800

x86-64, numa: Allocate memnodemap under max_pfn_mapped

We need to access it right way, so make sure that it is mapped already.

Prepare to put page table on local node, and nodemap is used before that.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933C8.7060105@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/mm/numa_64.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 7762a51..02d36ff 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -87,7 +87,7 @@ static int __init allocate_cachealigned_memnodemap(void)
 
 	addr = 0x8000;
 	nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
-	nodemap_addr = memblock_find_in_range(addr, max_pfn<<PAGE_SHIFT,
+	nodemap_addr = memblock_find_in_range(addr, get_max_mapped(),
 				      nodemap_size, L1_CACHE_BYTES);
 	if (nodemap_addr == MEMBLOCK_ERROR) {
 		printk(KERN_ERR

[tip:x86/mm] x86-64, numa: Put pgtable to local node memory

[tip-bot for Yinghai Lu]

Commit-ID:  1411e0ec3123ae4c4ead6bfc9fe3ee5a3ae5c327
Gitweb:     http://git.kernel.org/tip/1411e0ec3123ae4c4ead6bfc9fe3ee5a3ae5c327
Author:     Yinghai Lu <yinghai@kernel.org>
AuthorDate: Mon, 27 Dec 2010 16:48:17 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 29 Dec 2010 15:48:08 -0800

x86-64, numa: Put pgtable to local node memory

Introduce init_memory_mapping_high(), and use it with 64bit.

It will go with every memory segment above 4g to create page table to the
memory range itself.

before this patch all page tables was on one node.

with this patch, one RED-PEN is killed

debug out for 8 sockets system after patch
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff]
[    0.000000]  0000000000 - 007f600000 page 2M
[    0.000000]  007f600000 - 007f750000 page 4k
[    0.000000] kernel direct mapping tables up to 7f750000 @ [0x7f74c000-0x7f74ffff]
[    0.000000] RAMDISK: 7bc84000 - 7f745000
....
[    0.000000] Adding active range (0, 0x10, 0x95) 0 entries of 3200 used
[    0.000000] Adding active range (0, 0x100, 0x7f750) 1 entries of 3200 used
[    0.000000] Adding active range (0, 0x100000, 0x1080000) 2 entries of 3200 used
[    0.000000] Adding active range (1, 0x1080000, 0x2080000) 3 entries of 3200 used
[    0.000000] Adding active range (2, 0x2080000, 0x3080000) 4 entries of 3200 used
[    0.000000] Adding active range (3, 0x3080000, 0x4080000) 5 entries of 3200 used
[    0.000000] Adding active range (4, 0x4080000, 0x5080000) 6 entries of 3200 used
[    0.000000] Adding active range (5, 0x5080000, 0x6080000) 7 entries of 3200 used
[    0.000000] Adding active range (6, 0x6080000, 0x7080000) 8 entries of 3200 used
[    0.000000] Adding active range (7, 0x7080000, 0x8080000) 9 entries of 3200 used
[    0.000000] init_memory_mapping: [0x00000100000000-0x0000107fffffff]
[    0.000000]  0100000000 - 1080000000 page 2M
[    0.000000] kernel direct mapping tables up to 1080000000 @ [0x107ffbd000-0x107fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x107ffc2000-0x107fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00001080000000-0x0000207fffffff]
[    0.000000]  1080000000 - 2080000000 page 2M
[    0.000000] kernel direct mapping tables up to 2080000000 @ [0x207ff7d000-0x207fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x207ffc0000-0x207fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00002080000000-0x0000307fffffff]
[    0.000000]  2080000000 - 3080000000 page 2M
[    0.000000] kernel direct mapping tables up to 3080000000 @ [0x307ff3d000-0x307fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x307ffc0000-0x307fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00003080000000-0x0000407fffffff]
[    0.000000]  3080000000 - 4080000000 page 2M
[    0.000000] kernel direct mapping tables up to 4080000000 @ [0x407fefd000-0x407fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x407ffc0000-0x407fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00004080000000-0x0000507fffffff]
[    0.000000]  4080000000 - 5080000000 page 2M
[    0.000000] kernel direct mapping tables up to 5080000000 @ [0x507febd000-0x507fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x507ffc0000-0x507fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00005080000000-0x0000607fffffff]
[    0.000000]  5080000000 - 6080000000 page 2M
[    0.000000] kernel direct mapping tables up to 6080000000 @ [0x607fe7d000-0x607fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x607ffc0000-0x607fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00006080000000-0x0000707fffffff]
[    0.000000]  6080000000 - 7080000000 page 2M
[    0.000000] kernel direct mapping tables up to 7080000000 @ [0x707fe3d000-0x707fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x707ffc0000-0x707fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00007080000000-0x0000807fffffff]
[    0.000000]  7080000000 - 8080000000 page 2M
[    0.000000] kernel direct mapping tables up to 8080000000 @ [0x807fdfc000-0x807fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x807ffbf000-0x807fffffff]          PGTABLE
[    0.000000] Initmem setup node 0 [0000000000000000-000000107fffffff]
[    0.000000]   NODE_DATA [0x0000107ffbd000-0x0000107ffc1fff]
[    0.000000] Initmem setup node 1 [0000001080000000-000000207fffffff]
[    0.000000]   NODE_DATA [0x0000207ffbb000-0x0000207ffbffff]
[    0.000000] Initmem setup node 2 [0000002080000000-000000307fffffff]
[    0.000000]   NODE_DATA [0x0000307ffbb000-0x0000307ffbffff]
[    0.000000] Initmem setup node 3 [0000003080000000-000000407fffffff]
[    0.000000]   NODE_DATA [0x0000407ffbb000-0x0000407ffbffff]
[    0.000000] Initmem setup node 4 [0000004080000000-000000507fffffff]
[    0.000000]   NODE_DATA [0x0000507ffbb000-0x0000507ffbffff]
[    0.000000] Initmem setup node 5 [0000005080000000-000000607fffffff]
[    0.000000]   NODE_DATA [0x0000607ffbb000-0x0000607ffbffff]
[    0.000000] Initmem setup node 6 [0000006080000000-000000707fffffff]
[    0.000000]   NODE_DATA [0x0000707ffbb000-0x0000707ffbffff]
[    0.000000] Initmem setup node 7 [0000007080000000-000000807fffffff]
[    0.000000]   NODE_DATA [0x0000807ffba000-0x0000807ffbefff]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933D1.9020609@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/page_types.h |    2 +
 arch/x86/kernel/setup.c           |    8 -----
 arch/x86/mm/amdtopology_64.c      |    8 +++--
 arch/x86/mm/init.c                |    8 +-----
 arch/x86/mm/init_64.c             |   54 +++++++++++++++++++++++++++++++++++++
 arch/x86/mm/numa_64.c             |    6 +++-
 arch/x86/mm/srat_64.c             |    2 +
 7 files changed, 68 insertions(+), 20 deletions(-)

diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 93626e6..731d211 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -54,6 +54,8 @@ static inline phys_addr_t get_max_mapped(void)
 extern unsigned long init_memory_mapping(unsigned long start,
 					 unsigned long end);
 
+void init_memory_mapping_high(void);
+
 extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn,
 				int acpi, int k8);
 extern void free_initmem(void);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 3def8c9..fc0fe74 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -931,14 +931,6 @@ void __init setup_arch(char **cmdline_p)
 	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
 	max_pfn_mapped = max_low_pfn_mapped;
 
-#ifdef CONFIG_X86_64
-	if (max_pfn > max_low_pfn) {
-		max_pfn_mapped = init_memory_mapping(1UL<<32,
-						     max_pfn<<PAGE_SHIFT);
-		/* can we preseve max_low_pfn ?*/
-		max_low_pfn = max_pfn;
-	}
-#endif
 	memblock.current_limit = get_max_mapped();
 
 	/*
diff --git a/arch/x86/mm/amdtopology_64.c b/arch/x86/mm/amdtopology_64.c
index 51fae9c..ae6ad69 100644
--- a/arch/x86/mm/amdtopology_64.c
+++ b/arch/x86/mm/amdtopology_64.c
@@ -221,12 +221,14 @@ int __init amd_scan_nodes(void)
 		apicid_base = boot_cpu_physical_apicid;
 	}
 
-	for_each_node_mask(i, node_possible_map) {
-		int j;
-
+	for_each_node_mask(i, node_possible_map)
 		memblock_x86_register_active_regions(i,
 				nodes[i].start >> PAGE_SHIFT,
 				nodes[i].end >> PAGE_SHIFT);
+	init_memory_mapping_high();
+	for_each_node_mask(i, node_possible_map) {
+		int j;
+
 		for (j = apicid_base; j < cores + apicid_base; j++)
 			apicid_to_node[(i << bits) + j] = i;
 		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 5863950..fa6fe75 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -65,16 +65,10 @@ static void __init find_early_table_space(unsigned long end, int use_pse,
 #ifdef CONFIG_X86_32
 	/* for fixmap */
 	tables += roundup(__end_of_fixed_addresses * sizeof(pte_t), PAGE_SIZE);
-#endif
 
-	/*
-	 * RED-PEN putting page tables only on node 0 could
-	 * cause a hotspot and fill up ZONE_DMA. The page tables
-	 * need roughly 0.5KB per GB.
-	 */
-#ifdef CONFIG_X86_32
 	good_end = max_pfn_mapped << PAGE_SHIFT;
 #endif
+
 	base = memblock_find_in_range(start, good_end, tables, PAGE_SIZE);
 	if (base == MEMBLOCK_ERROR)
 		panic("Cannot find space for the kernel page tables");
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 024847d..194f273 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -607,9 +607,63 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
 				int acpi, int k8)
 {
 	memblock_x86_register_active_regions(0, start_pfn, end_pfn);
+	init_memory_mapping_high();
 }
 #endif
 
+struct mapping_work_data {
+	unsigned long start;
+	unsigned long end;
+	unsigned long pfn_mapped;
+};
+
+static int __init_refok
+mapping_work_fn(unsigned long start_pfn, unsigned long end_pfn, void *datax)
+{
+	struct mapping_work_data *data = datax;
+	unsigned long pfn_mapped;
+	unsigned long final_start, final_end;
+
+	final_start = max_t(unsigned long, start_pfn<<PAGE_SHIFT, data->start);
+	final_end = min_t(unsigned long, end_pfn<<PAGE_SHIFT, data->end);
+
+	if (final_end <= final_start)
+		return 0;
+
+	pfn_mapped = init_memory_mapping(final_start, final_end);
+
+	if (pfn_mapped > data->pfn_mapped)
+		data->pfn_mapped = pfn_mapped;
+
+	return 0;
+}
+
+static unsigned long __init_refok
+init_memory_mapping_active_regions(unsigned long start, unsigned long end)
+{
+	struct mapping_work_data data;
+
+	data.start = start;
+	data.end = end;
+	data.pfn_mapped = 0;
+
+	work_with_active_regions(MAX_NUMNODES, mapping_work_fn, &data);
+
+	return data.pfn_mapped;
+}
+
+void __init_refok init_memory_mapping_high(void)
+{
+	if (max_pfn > max_low_pfn) {
+		max_pfn_mapped = init_memory_mapping_active_regions(1UL<<32,
+							 max_pfn<<PAGE_SHIFT);
+		/* can we preserve max_low_pfn ? */
+		max_low_pfn = max_pfn;
+
+		memblock.current_limit = get_max_mapped();
+	}
+}
+
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 02d36ff..7cc26ae 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -590,11 +590,12 @@ static int __init numa_emulation(unsigned long start_pfn,
 	 * the e820 memory map.
 	 */
 	remove_all_active_ranges();
-	for_each_node_mask(i, node_possible_map) {
+	for_each_node_mask(i, node_possible_map)
 		memblock_x86_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
 						nodes[i].end >> PAGE_SHIFT);
+	init_memory_mapping_high();
+	for_each_node_mask(i, node_possible_map)
 		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
-	}
 	acpi_fake_nodes(nodes, num_nodes);
 	numa_init_array();
 	return 0;
@@ -645,6 +646,7 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn,
 	for (i = 0; i < nr_cpu_ids; i++)
 		numa_set_node(i, 0);
 	memblock_x86_register_active_regions(0, start_pfn, last_pfn);
+	init_memory_mapping_high();
 	setup_node_bootmem(0, start_pfn << PAGE_SHIFT, last_pfn << PAGE_SHIFT);
 }
 
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index a35cb9d..0b961c8 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -433,6 +433,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		return -1;
 	}
 
+	init_memory_mapping_high();
+
 	/* Account for nodes with cpus and no memory */
 	nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed);
 

[tip:x86/mm] x86-64: Move out cleanup higmap [_brk_end, _end) out of init_memory_mapping()

[tip-bot for Yinghai Lu]

Commit-ID:  f005fe12b90c5b9fe180a09209a893e09affa8aa
Gitweb:     http://git.kernel.org/tip/f005fe12b90c5b9fe180a09209a893e09affa8aa
Author:     Yinghai Lu <yinghai@kernel.org>
AuthorDate: Mon, 27 Dec 2010 16:48:32 -0800
Committer:  Ingo Molnar <mingo@elte.hu>
CommitDate: Wed, 5 Jan 2011 14:03:45 +0100

x86-64: Move out cleanup higmap [_brk_end, _end) out of init_memory_mapping()

It is not related to init_memory_mapping(),  and init_memory_mapping() is
getting more bigger.

So make it as seperated function and call it from reserve_brk() and that is
point when _brk_end is concluded.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933E0.7090305@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/setup.c |   24 ++++++++++++++++++++++++
 arch/x86/mm/init.c      |   19 -------------------
 2 files changed, 24 insertions(+), 19 deletions(-)

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index fc0fe74..635185b 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -293,10 +293,32 @@ static void __init init_gbpages(void)
 	else
 		direct_gbpages = 0;
 }
+
+static void __init cleanup_highmap_brk_end(void)
+{
+	pud_t *pud;
+	pmd_t *pmd;
+
+	mmu_cr4_features = read_cr4();
+
+	/*
+	 * _brk_end cannot change anymore, but it and _end may be
+	 * located on different 2M pages. cleanup_highmap(), however,
+	 * can only consider _end when it runs, so destroy any
+	 * mappings beyond _brk_end here.
+	 */
+	pud = pud_offset(pgd_offset_k(_brk_end), _brk_end);
+	pmd = pmd_offset(pud, _brk_end - 1);
+	while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1))
+		pmd_clear(pmd);
+}
 #else
 static inline void init_gbpages(void)
 {
 }
+static inline void cleanup_highmap_brk_end(void)
+{
+}
 #endif
 
 static void __init reserve_brk(void)
@@ -307,6 +329,8 @@ static void __init reserve_brk(void)
 	/* Mark brk area as locked down and no longer taking any
 	   new allocations */
 	_brk_start = 0;
+
+	cleanup_highmap_brk_end();
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index fa6fe75..35ee75d 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -270,25 +270,6 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	load_cr3(swapper_pg_dir);
 #endif
 
-#ifdef CONFIG_X86_64
-	if (!after_bootmem && !start) {
-		pud_t *pud;
-		pmd_t *pmd;
-
-		mmu_cr4_features = read_cr4();
-
-		/*
-		 * _brk_end cannot change anymore, but it and _end may be
-		 * located on different 2M pages. cleanup_highmap(), however,
-		 * can only consider _end when it runs, so destroy any
-		 * mappings beyond _brk_end here.
-		 */
-		pud = pud_offset(pgd_offset_k(_brk_end), _brk_end);
-		pmd = pmd_offset(pud, _brk_end - 1);
-		while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1))
-			pmd_clear(pmd);
-	}
-#endif
 	__flush_tlb_all();
 
 	if (!after_bootmem && e820_table_end > e820_table_start)