All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peppe CAVALLARO <peppe.cavallaro-qxv4g6HH51o@public.gmane.org>
To: Deepak SIKRI <deepak.sikri-qxv4g6HH51o@public.gmane.org>
Cc: "Trond.Myklebust-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org"
	<Trond.Myklebust-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org>,
	"netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Armando VISCONTI <armando.visconti-qxv4g6HH51o@public.gmane.org>,
	Shiraz HASHIM <shiraz.hashim-qxv4g6HH51o@public.gmane.org>,
	Viresh KUMAR <viresh.kumar-qxv4g6HH51o@public.gmane.org>
Subject: Re: STMMAC driver: NFS Problem on 2.6.37
Date: Thu, 13 Jan 2011 12:48:51 +0100	[thread overview]
Message-ID: <4D2EE6A3.7010309@st.com> (raw)
In-Reply-To: <4D2EC133.7010607-qxv4g6HH51o@public.gmane.org>

> Hi
>
> I am facing a problem related to nfs boot, while using the stmmac driver
> ported on 2.6.37 kernel. When we use a JFFS2 file system and mount the
> kernel,
> the network driver works fine.
>
> I have been following the mailing list and could find some issues with NFS
> on 2.6.37 but I am not too sure whether the kernel crash I am getting is
> related to that.
>
> The driver worked fine on 2.6.32 kernel, but while booting the 2.6.37
> kernel I get the following log messages:
>
Also no problem on my side with the Kernel 2.6.32 plus
the latest device driver from net-2.6.

Peppe

> stmmac: Rx Checksum Offload Engine supported
>         TX Checksum insertion supported
> IP-Config: Complete:
>      device=eth0, addr=192.168.1.10, mask=255.255.255.0,
> gw=255.255.255.255,
>      host=192.168.1.10, domain=, nis-domain=(none),
>      bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath=
> VFS: Unable to mount root fs via NFS, trying floppy.
> VFS: Cannot open root device "nfs" or unknown-block(2,0)
> Please append a correct "root=" boot option; here are the available
> partitions:
> 1f00              64 mtdblock0  (driver?)
> 1f01             256 mtdblock1  (driver?)
> 1f02            2816 mtdblock2  (driver?)
> 1f03            5056 mtdblock3  (driver?)
> Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(2,0)
> Backtrace:
> [<c00370f0>] (dump_backtrace+0x0/0x110) from [<c0037234>]
> (dump_stack+0x18/0x1c)
>  r7:c7b5b000 r6:00000000 r5:c7b5b015 r4:c04296b8
> [<c003721c>] (dump_stack+0x0/0x1c) from [<c004ebf8>] (panic+0x60/0x180)
> [<c004eb98>] (panic+0x0/0x180) from [<c0009114>]
> (mount_block_root+0x1d4/0x214)
>  r3:00000000 r2:00000001 r1:c782bf50 r0:c0394851
> [<c0008f40>] (mount_block_root+0x0/0x214) from [<c00091fc>]
> (mount_root+0xa8/0xc8)
> [<c0009154>] (mount_root+0x0/0xc8) from [<c0009388>]
> (prepare_namespace+0x16c/0x1d0)
>  r4:c04288c0
> [<c000921c>] (prepare_namespace+0x0/0x1d0) from [<c0008904>]
> (kernel_init+0x1cc/0x220)
>  r5:c0402048 r4:c0428860
> [<c0008738>] (kernel_init+0x0/0x220) from [<c00522a8>] (do_exit+0x0/0x5e0)
>  r7:00000013 r6:c00522a8 r5:c0008738 r4:00000000
> CPU0: stopping
> Backtrace:
> [<c00370f0>] (dump_backtrace+0x0/0x110) from [<c0037234>]
> (dump_stack+0x18/0x1c)
>  r7:c0405484 r6:00000406 r5:00000000 r4:00000000
> [<c003721c>] (dump_stack+0x0/0x1c) from [<c002d334>] (do_IPI+0xb4/0x124)
> [<c002d280>] (do_IPI+0x0/0x124) from [<c0032bb4>] (__irq_svc+0x34/0xc0)
> Exception stack(0xc03f3f50 to 0xc03f3f98)
> 3f40:                                     c0402048 00000000 c03f3f98
> 00000000
> 3f60: c03f2000 c04288dc c0027290 c0405484 000258e8 411fc091 00000000
> c03f3fa4
> 3f80: c03f3fa8 c03f3f98 c0034a24 c0034a28 60000013 ffffffff
>  r5:fc800100 r4:ffffffff
> [<c00349fc>] (default_idle+0x0/0x30) from [<c0034874>]
> (cpu_idle+0x80/0xc0)
> [<c00347f4>] (cpu_idle+0x0/0xc0) from [<c030602c>] (rest_init+0x64/0x7c)
>  r5:c04288dc r4:c04020b0
> [<c0305fc8>] (rest_init+0x0/0x7c) from [<c0008bd4>]
> (start_kernel+0x27c/0x2d8)
> [<c0008958>] (start_kernel+0x0/0x2d8) from [<00008038>] (0x8038)
>  r5:c0401fac r4:10c5387d
>
> I have tried the same over latest source picked from linus tree,
> 4162cf64973df51fc885825bc9ca4d055891c49f
> Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
>
> We are using version 3 of the NFs protocol in kernel's NFS client.
>
>
> Regards
> Deepak
> ST Microelectronics
>
> .
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Peppe CAVALLARO <peppe.cavallaro@st.com>
To: Deepak SIKRI <deepak.sikri@st.com>
Cc: "Trond.Myklebust@netapp.com" <Trond.Myklebust@netapp.com>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-nfs@vger.kernel.org" <linux-nfs@vger.kernel.org>,
	Armando VISCONTI <armando.visconti@st.com>,
	Shiraz HASHIM <shiraz.hashim@st.com>,
	Viresh KUMAR <viresh.kumar@st.com>
Subject: Re: STMMAC driver: NFS Problem on 2.6.37
Date: Thu, 13 Jan 2011 12:48:51 +0100	[thread overview]
Message-ID: <4D2EE6A3.7010309@st.com> (raw)
In-Reply-To: <4D2EC133.7010607@st.com>

> Hi
>
> I am facing a problem related to nfs boot, while using the stmmac driver
> ported on 2.6.37 kernel. When we use a JFFS2 file system and mount the
> kernel,
> the network driver works fine.
>
> I have been following the mailing list and could find some issues with NFS
> on 2.6.37 but I am not too sure whether the kernel crash I am getting is
> related to that.
>
> The driver worked fine on 2.6.32 kernel, but while booting the 2.6.37
> kernel I get the following log messages:
>
Also no problem on my side with the Kernel 2.6.32 plus
the latest device driver from net-2.6.

Peppe

> stmmac: Rx Checksum Offload Engine supported
>         TX Checksum insertion supported
> IP-Config: Complete:
>      device=eth0, addr=192.168.1.10, mask=255.255.255.0,
> gw=255.255.255.255,
>      host=192.168.1.10, domain=, nis-domain=(none),
>      bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath=
> VFS: Unable to mount root fs via NFS, trying floppy.
> VFS: Cannot open root device "nfs" or unknown-block(2,0)
> Please append a correct "root=" boot option; here are the available
> partitions:
> 1f00              64 mtdblock0  (driver?)
> 1f01             256 mtdblock1  (driver?)
> 1f02            2816 mtdblock2  (driver?)
> 1f03            5056 mtdblock3  (driver?)
> Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(2,0)
> Backtrace:
> [<c00370f0>] (dump_backtrace+0x0/0x110) from [<c0037234>]
> (dump_stack+0x18/0x1c)
>  r7:c7b5b000 r6:00000000 r5:c7b5b015 r4:c04296b8
> [<c003721c>] (dump_stack+0x0/0x1c) from [<c004ebf8>] (panic+0x60/0x180)
> [<c004eb98>] (panic+0x0/0x180) from [<c0009114>]
> (mount_block_root+0x1d4/0x214)
>  r3:00000000 r2:00000001 r1:c782bf50 r0:c0394851
> [<c0008f40>] (mount_block_root+0x0/0x214) from [<c00091fc>]
> (mount_root+0xa8/0xc8)
> [<c0009154>] (mount_root+0x0/0xc8) from [<c0009388>]
> (prepare_namespace+0x16c/0x1d0)
>  r4:c04288c0
> [<c000921c>] (prepare_namespace+0x0/0x1d0) from [<c0008904>]
> (kernel_init+0x1cc/0x220)
>  r5:c0402048 r4:c0428860
> [<c0008738>] (kernel_init+0x0/0x220) from [<c00522a8>] (do_exit+0x0/0x5e0)
>  r7:00000013 r6:c00522a8 r5:c0008738 r4:00000000
> CPU0: stopping
> Backtrace:
> [<c00370f0>] (dump_backtrace+0x0/0x110) from [<c0037234>]
> (dump_stack+0x18/0x1c)
>  r7:c0405484 r6:00000406 r5:00000000 r4:00000000
> [<c003721c>] (dump_stack+0x0/0x1c) from [<c002d334>] (do_IPI+0xb4/0x124)
> [<c002d280>] (do_IPI+0x0/0x124) from [<c0032bb4>] (__irq_svc+0x34/0xc0)
> Exception stack(0xc03f3f50 to 0xc03f3f98)
> 3f40:                                     c0402048 00000000 c03f3f98
> 00000000
> 3f60: c03f2000 c04288dc c0027290 c0405484 000258e8 411fc091 00000000
> c03f3fa4
> 3f80: c03f3fa8 c03f3f98 c0034a24 c0034a28 60000013 ffffffff
>  r5:fc800100 r4:ffffffff
> [<c00349fc>] (default_idle+0x0/0x30) from [<c0034874>]
> (cpu_idle+0x80/0xc0)
> [<c00347f4>] (cpu_idle+0x0/0xc0) from [<c030602c>] (rest_init+0x64/0x7c)
>  r5:c04288dc r4:c04020b0
> [<c0305fc8>] (rest_init+0x0/0x7c) from [<c0008bd4>]
> (start_kernel+0x27c/0x2d8)
> [<c0008958>] (start_kernel+0x0/0x2d8) from [<00008038>] (0x8038)
>  r5:c0401fac r4:10c5387d
>
> I have tried the same over latest source picked from linus tree,
> 4162cf64973df51fc885825bc9ca4d055891c49f
> Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
>
> We are using version 3 of the NFs protocol in kernel's NFS client.
>
>
> Regards
> Deepak
> ST Microelectronics
>
> .
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

  parent reply	other threads:[~2011-01-13 11:48 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-13  9:09 STMMAC driver: NFS Problem on 2.6.37 deepaksi
2011-01-13  9:09 ` deepaksi
     [not found] ` <4D2EC133.7010607-qxv4g6HH51o@public.gmane.org>
2011-01-13 11:48   ` Peppe CAVALLARO [this message]
2011-01-13 11:48     ` Peppe CAVALLARO
2011-01-13 15:07   ` Chuck Lever
2011-01-13 15:07     ` Chuck Lever
     [not found]     ` <2D04CF75-CA68-4BDC-99A3-FA1DD6113602-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2011-01-13 18:28       ` Armando Visconti
2011-01-13 18:28         ` Armando Visconti
2011-01-14  9:56         ` deepaksi
     [not found]           ` <4D301DD1.9070104-qxv4g6HH51o@public.gmane.org>
2011-01-14 15:35             ` Chuck Lever
2011-01-14 15:35               ` Chuck Lever
     [not found]               ` <4D3EBA54.4020308@st.com>
     [not found]                 ` <4D3EBA54.4020308-qxv4g6HH51o@public.gmane.org>
2011-01-25 18:04                   ` Chuck Lever
2011-01-25 18:04                     ` Chuck Lever
     [not found]                     ` <EFFBD485-8B7E-44D1-A8D2-61E73BF42DF9-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2011-01-28 12:43                       ` Shiraz Hashim
2011-01-28 12:43                         ` Shiraz Hashim
2011-01-28 16:58                         ` Chuck Lever
2011-02-09 20:01                     ` Brian Downing
     [not found]                       ` <20110209200129.GA6402-QEOkiq82tQWoLK6CJbI5/KxOck334EZe@public.gmane.org>
2011-02-09 20:12                         ` Chuck Lever
2011-02-09 20:12                           ` Chuck Lever
2011-02-09 20:58                           ` Brian Downing
     [not found]                             ` <20110209205855.GB6402-QEOkiq82tQWoLK6CJbI5/KxOck334EZe@public.gmane.org>
2011-02-09 21:26                               ` Chuck Lever
2011-02-09 21:26                                 ` Chuck Lever
2011-02-24 13:36                                 ` Shiraz Hashim
2011-02-24 18:33                                   ` Chuck Lever
2011-02-24 18:33                                     ` Chuck Lever

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D2EE6A3.7010309@st.com \
    --to=peppe.cavallaro-qxv4g6hh51o@public.gmane.org \
    --cc=Trond.Myklebust-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org \
    --cc=armando.visconti-qxv4g6HH51o@public.gmane.org \
    --cc=deepak.sikri-qxv4g6HH51o@public.gmane.org \
    --cc=linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=shiraz.hashim-qxv4g6HH51o@public.gmane.org \
    --cc=viresh.kumar-qxv4g6HH51o@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.