All of lore.kernel.org
 help / color / mirror / Atom feed
* No joy on "standard" PC
@ 2011-01-26 13:43 Gary Thomas
  2011-01-26 13:50 ` Gary Thomas
  2011-01-26 21:26 ` Darren Hart
  0 siblings, 2 replies; 18+ messages in thread
From: Gary Thomas @ 2011-01-26 13:43 UTC (permalink / raw)
  To: Poky

I finally got Poky to build for a standard PC (actually atom-pc
so I could build a live/bootable image).  Sadly, that's all I
have is an image as I can't get it to run anywhere :-(

* On my laptop (the point of this exercise) which is an older
Pentium-III machine, the kernel crashes almost immediately.

* On my brand new laptop (Core-i3), I couldn't get it to even
try...

* On a VirtualBox machine, it boots but then sits forever
"waiting for removable media"...

Oh well, back to my OMAP that at least boots :-(

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-26 13:43 No joy on "standard" PC Gary Thomas
@ 2011-01-26 13:50 ` Gary Thomas
  2011-01-26 13:58   ` Bruce Ashfield
  2011-01-26 21:26 ` Darren Hart
  1 sibling, 1 reply; 18+ messages in thread
From: Gary Thomas @ 2011-01-26 13:50 UTC (permalink / raw)
  To: Poky

On 01/26/2011 06:43 AM, Gary Thomas wrote:
> I finally got Poky to build for a standard PC (actually atom-pc
> so I could build a live/bootable image). Sadly, that's all I
> have is an image as I can't get it to run anywhere :-(
>
> * On my laptop (the point of this exercise) which is an older
> Pentium-III machine, the kernel crashes almost immediately.

Exact same failure on my [newer] AMD/2800 tower.

>
> * On my brand new laptop (Core-i3), I couldn't get it to even
> try...
>
> * On a VirtualBox machine, it boots but then sits forever
> "waiting for removable media"...
>
> Oh well, back to my OMAP that at least boots :-(
>

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-26 13:50 ` Gary Thomas
@ 2011-01-26 13:58   ` Bruce Ashfield
  2011-01-26 14:17     ` Gary Thomas
  0 siblings, 1 reply; 18+ messages in thread
From: Bruce Ashfield @ 2011-01-26 13:58 UTC (permalink / raw)
  To: Gary Thomas; +Cc: Poky

On Wed, Jan 26, 2011 at 8:50 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> On 01/26/2011 06:43 AM, Gary Thomas wrote:
>>
>> I finally got Poky to build for a standard PC (actually atom-pc
>> so I could build a live/bootable image). Sadly, that's all I
>> have is an image as I can't get it to run anywhere :-(
>>
>> * On my laptop (the point of this exercise) which is an older
>> Pentium-III machine, the kernel crashes almost immediately.
>
> Exact same failure on my [newer] AMD/2800 tower.

I'll start some builds up here and see how things perform around
here.  I've largely been building and booting the emulator for
x86 and the non-x86 hardware targets. But this sounds like something
worth taking for a spin.

Cheers,

Bruce


>
>>
>> * On my brand new laptop (Core-i3), I couldn't get it to even
>> try...
>>
>> * On a VirtualBox machine, it boots but then sits forever
>> "waiting for removable media"...
>>
>> Oh well, back to my OMAP that at least boots :-(
>>
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
>



-- 
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-26 13:58   ` Bruce Ashfield
@ 2011-01-26 14:17     ` Gary Thomas
  2011-01-26 14:24       ` Bruce Ashfield
  0 siblings, 1 reply; 18+ messages in thread
From: Gary Thomas @ 2011-01-26 14:17 UTC (permalink / raw)
  To: Bruce Ashfield; +Cc: Poky

On 01/26/2011 06:58 AM, Bruce Ashfield wrote:
> On Wed, Jan 26, 2011 at 8:50 AM, Gary Thomas<gary@mlbassoc.com>  wrote:
>> On 01/26/2011 06:43 AM, Gary Thomas wrote:
>>>
>>> I finally got Poky to build for a standard PC (actually atom-pc
>>> so I could build a live/bootable image). Sadly, that's all I
>>> have is an image as I can't get it to run anywhere :-(
>>>
>>> * On my laptop (the point of this exercise) which is an older
>>> Pentium-III machine, the kernel crashes almost immediately.
>>
>> Exact same failure on my [newer] AMD/2800 tower.
>
> I'll start some builds up here and see how things perform around
> here.  I've largely been building and booting the emulator for
> x86 and the non-x86 hardware targets. But this sounds like something
> worth taking for a spin.

Thanks.  FAOD, here's my build setup:
   OE Build Configuration:
   BB_VERSION        = "1.11.0"
   METADATA_BRANCH   = "local_master"
   METADATA_REVISION = "db9b8bc9a34f3f486d6ce948a073a1f042d9dbb7"
   TARGET_ARCH       = "i586"
   TARGET_OS         = "linux"
   MACHINE           = "atom-pc"
   DISTRO            = "poky"
   DISTRO_VERSION    = "0.9+snapshot-20110126"
   TARGET_FPU        = ""

Host CPU = Fedora-13/x86
Building poky-image-sato-live.

>>
>>>
>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>> try...
>>>
>>> * On a VirtualBox machine, it boots but then sits forever
>>> "waiting for removable media"...
>>>
>>> Oh well, back to my OMAP that at least boots :-(

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-26 14:17     ` Gary Thomas
@ 2011-01-26 14:24       ` Bruce Ashfield
  2011-01-26 21:22         ` Bruce Ashfield
  0 siblings, 1 reply; 18+ messages in thread
From: Bruce Ashfield @ 2011-01-26 14:24 UTC (permalink / raw)
  To: Gary Thomas; +Cc: Poky

On Wed, Jan 26, 2011 at 9:17 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> On 01/26/2011 06:58 AM, Bruce Ashfield wrote:
>>
>> On Wed, Jan 26, 2011 at 8:50 AM, Gary Thomas<gary@mlbassoc.com>  wrote:
>>>
>>> On 01/26/2011 06:43 AM, Gary Thomas wrote:
>>>>
>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>> so I could build a live/bootable image). Sadly, that's all I
>>>> have is an image as I can't get it to run anywhere :-(
>>>>
>>>> * On my laptop (the point of this exercise) which is an older
>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>
>>> Exact same failure on my [newer] AMD/2800 tower.
>>
>> I'll start some builds up here and see how things perform around
>> here.  I've largely been building and booting the emulator for
>> x86 and the non-x86 hardware targets. But this sounds like something
>> worth taking for a spin.
>
> Thanks.  FAOD, here's my build setup:
>  OE Build Configuration:
>  BB_VERSION        = "1.11.0"
>  METADATA_BRANCH   = "local_master"
>  METADATA_REVISION = "db9b8bc9a34f3f486d6ce948a073a1f042d9dbb7"
>  TARGET_ARCH       = "i586"
>  TARGET_OS         = "linux"
>  MACHINE           = "atom-pc"
>  DISTRO            = "poky"
>  DISTRO_VERSION    = "0.9+snapshot-20110126"
>  TARGET_FPU        = ""
>

perfect. This matches what I launched a few minutes ago.

Bruce

> Host CPU = Fedora-13/x86
> Building poky-image-sato-live.
>
>>>
>>>>
>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>> try...
>>>>
>>>> * On a VirtualBox machine, it boots but then sits forever
>>>> "waiting for removable media"...
>>>>
>>>> Oh well, back to my OMAP that at least boots :-(
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
>



-- 
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-26 14:24       ` Bruce Ashfield
@ 2011-01-26 21:22         ` Bruce Ashfield
  0 siblings, 0 replies; 18+ messages in thread
From: Bruce Ashfield @ 2011-01-26 21:22 UTC (permalink / raw)
  To: Gary Thomas; +Cc: Poky

On Wed, Jan 26, 2011 at 9:24 AM, Bruce Ashfield
<bruce.ashfield@gmail.com> wrote:
> On Wed, Jan 26, 2011 at 9:17 AM, Gary Thomas <gary@mlbassoc.com> wrote:
>> On 01/26/2011 06:58 AM, Bruce Ashfield wrote:
>>>
>>> On Wed, Jan 26, 2011 at 8:50 AM, Gary Thomas<gary@mlbassoc.com>  wrote:
>>>>
>>>> On 01/26/2011 06:43 AM, Gary Thomas wrote:
>>>>>
>>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>>> so I could build a live/bootable image). Sadly, that's all I
>>>>> have is an image as I can't get it to run anywhere :-(
>>>>>
>>>>> * On my laptop (the point of this exercise) which is an older
>>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>>
>>>> Exact same failure on my [newer] AMD/2800 tower.
>>>
>>> I'll start some builds up here and see how things perform around
>>> here.  I've largely been building and booting the emulator for
>>> x86 and the non-x86 hardware targets. But this sounds like something
>>> worth taking for a spin.
>>
>> Thanks.  FAOD, here's my build setup:
>>  OE Build Configuration:
>>  BB_VERSION        = "1.11.0"
>>  METADATA_BRANCH   = "local_master"
>>  METADATA_REVISION = "db9b8bc9a34f3f486d6ce948a073a1f042d9dbb7"
>>  TARGET_ARCH       = "i586"
>>  TARGET_OS         = "linux"
>>  MACHINE           = "atom-pc"
>>  DISTRO            = "poky"
>>  DISTRO_VERSION    = "0.9+snapshot-20110126"
>>  TARGET_FPU        = ""
>>
>
> perfect. This matches what I launched a few minutes ago.

This probably won't be all that helpful .. but I built and booted the
atom-pc in both the minimal and sdk images via a usb stick by
following the instructions in README.hardware.

(this was the 2.6.34 kernel, the 2.6.37 kernel still needs some more options)

This was an old pentium (pentium 4) target I had here, so nothing
special.

What was your boot media ? hard disk ?

Bruce

>
> Bruce
>
>> Host CPU = Fedora-13/x86
>> Building poky-image-sato-live.
>>
>>>>
>>>>>
>>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>>> try...
>>>>>
>>>>> * On a VirtualBox machine, it boots but then sits forever
>>>>> "waiting for removable media"...
>>>>>
>>>>> Oh well, back to my OMAP that at least boots :-(
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas                 |  Consulting for the
>> MLB Associates              |    Embedded world
>> ------------------------------------------------------------
>>
>
>
>
> --
> "Thou shalt not follow the NULL pointer, for chaos and madness await
> thee at its end"
>



-- 
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-26 13:43 No joy on "standard" PC Gary Thomas
  2011-01-26 13:50 ` Gary Thomas
@ 2011-01-26 21:26 ` Darren Hart
  2011-01-26 22:07   ` Gary Thomas
  1 sibling, 1 reply; 18+ messages in thread
From: Darren Hart @ 2011-01-26 21:26 UTC (permalink / raw)
  To: Gary Thomas; +Cc: Poky

On 01/26/2011 05:43 AM, Gary Thomas wrote:
> I finally got Poky to build for a standard PC (actually atom-pc
> so I could build a live/bootable image). Sadly, that's all I
> have is an image as I can't get it to run anywhere :-(
>
> * On my laptop (the point of this exercise) which is an older
> Pentium-III machine, the kernel crashes almost immediately.

Can you capture the output and provide some details on the hardware?

>
> * On my brand new laptop (Core-i3), I couldn't get it to even
> try...

What happened? Some bios are very particular about usb layout, see
README.hardware under atom-pc. Some (including my netbook) require
that it be in USB-ZIP format, so you can't just dd the image to
the stick in some cases (unfortunately).

>
> * On a VirtualBox machine, it boots but then sits forever
> "waiting for removable media"...

Can you share the messages leading up to this? Is it trying to mount ram0?

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-26 21:26 ` Darren Hart
@ 2011-01-26 22:07   ` Gary Thomas
  2011-01-27  0:02     ` Darren Hart
  0 siblings, 1 reply; 18+ messages in thread
From: Gary Thomas @ 2011-01-26 22:07 UTC (permalink / raw)
  To: Darren Hart; +Cc: Poky

On 01/26/2011 02:26 PM, Darren Hart wrote:
> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>> I finally got Poky to build for a standard PC (actually atom-pc
>> so I could build a live/bootable image). Sadly, that's all I
>> have is an image as I can't get it to run anywhere :-(
>>
>> * On my laptop (the point of this exercise) which is an older
>> Pentium-III machine, the kernel crashes almost immediately.
>
> Can you capture the output and provide some details on the hardware?

Hard to do - I took pictures of the screen with my camera, the results
may help, but won't win me a Pulitzer :-)

On the AMD/2800+
   http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
On the old Pentium-III laptop
   http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG
   http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG
>
>>
>> * On my brand new laptop (Core-i3), I couldn't get it to even
>> try...
>
> What happened? Some bios are very particular about usb layout, see
> README.hardware under atom-pc. Some (including my netbook) require
> that it be in USB-ZIP format, so you can't just dd the image to
> the stick in some cases (unfortunately).

My boot medium is a CD-RW with the ISO image.
Not sure why it didn't want to boot before, but when I just retried
it, it hung in yet a different way.
   http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG

>
>>
>> * On a VirtualBox machine, it boots but then sits forever
>> "waiting for removable media"...
>
> Can you share the messages leading up to this? Is it trying to mount ram0?
>
   http://www.mlbassoc.com/poky/BootFailures/poky-hangs.png

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-26 22:07   ` Gary Thomas
@ 2011-01-27  0:02     ` Darren Hart
  2011-01-27  0:13       ` Gary Thomas
  0 siblings, 1 reply; 18+ messages in thread
From: Darren Hart @ 2011-01-27  0:02 UTC (permalink / raw)
  To: Gary Thomas; +Cc: Poky

On 01/26/2011 02:07 PM, Gary Thomas wrote:
> On 01/26/2011 02:26 PM, Darren Hart wrote:
>> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>>> I finally got Poky to build for a standard PC (actually atom-pc
>>> so I could build a live/bootable image). Sadly, that's all I
>>> have is an image as I can't get it to run anywhere :-(
>>>
>>> * On my laptop (the point of this exercise) which is an older
>>> Pentium-III machine, the kernel crashes almost immediately.
>>
>> Can you capture the output and provide some details on the hardware?
>
> Hard to do - I took pictures of the screen with my camera, the results
> may help, but won't win me a Pulitzer :-)
>
> On the AMD/2800+
> http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
> On the old Pentium-III laptop
> http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG

Failing to mount the root partition either due to missing drivers for 
the block device or the filesystem. You said this was MACHINE=atom-pc 
and poky-image-sato-live? And you're booting using the .iso image burned 
to a CD?

> http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG

Too late, missed the good bits. I suspect the two above are adequate.

>>
>>>
>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>> try...
>>
>> What happened? Some bios are very particular about usb layout, see
>> README.hardware under atom-pc. Some (including my netbook) require
>> that it be in USB-ZIP format, so you can't just dd the image to
>> the stick in some cases (unfortunately).
>
> My boot medium is a CD-RW with the ISO image.
> Not sure why it didn't want to boot before, but when I just retried
> it, it hung in yet a different way.
> http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG

If I'm reading this one correctly, it's failing to boot from the USB 
device and later detects another drive (My Passport) which has something 
other than a standard ext[23] filesystem on the first partition.

>
>>
>>>
>>> * On a VirtualBox machine, it boots but then sits forever
>>> "waiting for removable media"...
>>
>> Can you share the messages leading up to this? Is it trying to mount
>> ram0?
>>
> http://www.mlbassoc.com/poky/BootFailures/poky-hangs.png
>

This I haven't tried... hrm...

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-27  0:02     ` Darren Hart
@ 2011-01-27  0:13       ` Gary Thomas
  2011-01-27  3:30         ` Darren Hart
  0 siblings, 1 reply; 18+ messages in thread
From: Gary Thomas @ 2011-01-27  0:13 UTC (permalink / raw)
  To: Darren Hart; +Cc: Poky

On 01/26/2011 05:02 PM, Darren Hart wrote:
> On 01/26/2011 02:07 PM, Gary Thomas wrote:
>> On 01/26/2011 02:26 PM, Darren Hart wrote:
>>> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>> so I could build a live/bootable image). Sadly, that's all I
>>>> have is an image as I can't get it to run anywhere :-(
>>>>
>>>> * On my laptop (the point of this exercise) which is an older
>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>
>>> Can you capture the output and provide some details on the hardware?
>>
>> Hard to do - I took pictures of the screen with my camera, the results
>> may help, but won't win me a Pulitzer :-)
>>
>> On the AMD/2800+
>> http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
>> On the old Pentium-III laptop
>> http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG
>
> Failing to mount the root partition either due to missing drivers for the block device or the filesystem. You said this was MACHINE=atom-pc and poky-image-sato-live? And you're
> booting using the .iso image burned to a CD?

Correct.

>
>> http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG
>
> Too late, missed the good bits. I suspect the two above are adequate.
>
>>>
>>>>
>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>> try...
>>>
>>> What happened? Some bios are very particular about usb layout, see
>>> README.hardware under atom-pc. Some (including my netbook) require
>>> that it be in USB-ZIP format, so you can't just dd the image to
>>> the stick in some cases (unfortunately).
>>
>> My boot medium is a CD-RW with the ISO image.
>> Not sure why it didn't want to boot before, but when I just retried
>> it, it hung in yet a different way.
>> http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG
>
> If I'm reading this one correctly, it's failing to boot from the USB device and later detects another drive (My Passport) which has something other than a standard ext[23]
> filesystem on the first partition.

Same boot CD as above - I'm not sure what it's up to at this point.

>
>>
>>>
>>>>
>>>> * On a VirtualBox machine, it boots but then sits forever
>>>> "waiting for removable media"...
>>>
>>> Can you share the messages leading up to this? Is it trying to mount
>>> ram0?
>>>
>> http://www.mlbassoc.com/poky/BootFailures/poky-hangs.png
>>
>
> This I haven't tried... hrm...
>

... all I want is to run Poky on my laptop :-)

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-27  0:13       ` Gary Thomas
@ 2011-01-27  3:30         ` Darren Hart
  2011-01-27 12:47           ` Gary Thomas
  0 siblings, 1 reply; 18+ messages in thread
From: Darren Hart @ 2011-01-27  3:30 UTC (permalink / raw)
  To: Gary Thomas; +Cc: Poky

On 01/26/2011 04:13 PM, Gary Thomas wrote:
> On 01/26/2011 05:02 PM, Darren Hart wrote:
>> On 01/26/2011 02:07 PM, Gary Thomas wrote:
>>> On 01/26/2011 02:26 PM, Darren Hart wrote:
>>>> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>>> so I could build a live/bootable image). Sadly, that's all I
>>>>> have is an image as I can't get it to run anywhere :-(
>>>>>
>>>>> * On my laptop (the point of this exercise) which is an older
>>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>>
>>>> Can you capture the output and provide some details on the hardware?
>>>
>>> Hard to do - I took pictures of the screen with my camera, the results
>>> may help, but won't win me a Pulitzer :-)
>>>
>>> On the AMD/2800+
>>> http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
>>> On the old Pentium-III laptop
>>> http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG
>>
>> Failing to mount the root partition either due to missing drivers for
>> the block device or the filesystem. You said this was MACHINE=atom-pc
>> and poky-image-sato-live? And you're
>> booting using the .iso image burned to a CD?
>
> Correct.
>
>>
>>> http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG
>>
>> Too late, missed the good bits. I suspect the two above are adequate.
>>
>>>>
>>>>>
>>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>>> try...
>>>>
>>>> What happened? Some bios are very particular about usb layout, see
>>>> README.hardware under atom-pc. Some (including my netbook) require
>>>> that it be in USB-ZIP format, so you can't just dd the image to
>>>> the stick in some cases (unfortunately).
>>>
>>> My boot medium is a CD-RW with the ISO image.
>>> Not sure why it didn't want to boot before, but when I just retried
>>> it, it hung in yet a different way.
>>> http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG
>>
>> If I'm reading this one correctly, it's failing to boot from the USB
>> device and later detects another drive (My Passport) which has
>> something other than a standard ext[23]
>> filesystem on the first partition.
>
> Same boot CD as above - I'm not sure what it's up to at this point.

Check the .config in the linux-yocto build directory, does it have
CONFIG_ISO9660_FS set?

I'll have a look in the morning as well.

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-27  3:30         ` Darren Hart
@ 2011-01-27 12:47           ` Gary Thomas
  2011-01-27 22:23             ` Gary Thomas
  0 siblings, 1 reply; 18+ messages in thread
From: Gary Thomas @ 2011-01-27 12:47 UTC (permalink / raw)
  To: Darren Hart; +Cc: Poky

On 01/26/2011 08:30 PM, Darren Hart wrote:
> On 01/26/2011 04:13 PM, Gary Thomas wrote:
>> On 01/26/2011 05:02 PM, Darren Hart wrote:
>>> On 01/26/2011 02:07 PM, Gary Thomas wrote:
>>>> On 01/26/2011 02:26 PM, Darren Hart wrote:
>>>>> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>>>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>>>> so I could build a live/bootable image). Sadly, that's all I
>>>>>> have is an image as I can't get it to run anywhere :-(
>>>>>>
>>>>>> * On my laptop (the point of this exercise) which is an older
>>>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>>>
>>>>> Can you capture the output and provide some details on the hardware?
>>>>
>>>> Hard to do - I took pictures of the screen with my camera, the results
>>>> may help, but won't win me a Pulitzer :-)
>>>>
>>>> On the AMD/2800+
>>>> http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
>>>> On the old Pentium-III laptop
>>>> http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG
>>>
>>> Failing to mount the root partition either due to missing drivers for
>>> the block device or the filesystem. You said this was MACHINE=atom-pc
>>> and poky-image-sato-live? And you're
>>> booting using the .iso image burned to a CD?
>>
>> Correct.
>>
>>>
>>>> http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG
>>>
>>> Too late, missed the good bits. I suspect the two above are adequate.
>>>
>>>>>
>>>>>>
>>>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>>>> try...
>>>>>
>>>>> What happened? Some bios are very particular about usb layout, see
>>>>> README.hardware under atom-pc. Some (including my netbook) require
>>>>> that it be in USB-ZIP format, so you can't just dd the image to
>>>>> the stick in some cases (unfortunately).
>>>>
>>>> My boot medium is a CD-RW with the ISO image.
>>>> Not sure why it didn't want to boot before, but when I just retried
>>>> it, it hung in yet a different way.
>>>> http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG
>>>
>>> If I'm reading this one correctly, it's failing to boot from the USB
>>> device and later detects another drive (My Passport) which has
>>> something other than a standard ext[23]
>>> filesystem on the first partition.
>>
>> Same boot CD as above - I'm not sure what it's up to at this point.
>
> Check the .config in the linux-yocto build directory, does it have
> CONFIG_ISO9660_FS set?

Nope :-(
   $ grep ISO9660 
tmp/work/atom-pc-poky-linux/linux-yocto-stable-2.6.34+git0+e1f85a470934a0cf6abde5d95533e74501822c6b_0+72ca49ab08b8eb475cec82a10049503602325791-r1/linux-atom-pc-standard-build/.config
   # CONFIG_ISO9660_FS is not set

I'll try forcing this and rebuild to test.

>
> I'll have a look in the morning as well.
>

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-27 12:47           ` Gary Thomas
@ 2011-01-27 22:23             ` Gary Thomas
  2011-01-28 14:28               ` Gary Thomas
  0 siblings, 1 reply; 18+ messages in thread
From: Gary Thomas @ 2011-01-27 22:23 UTC (permalink / raw)
  To: Darren Hart; +Cc: Poky

On 01/27/2011 05:47 AM, Gary Thomas wrote:
> On 01/26/2011 08:30 PM, Darren Hart wrote:
>> On 01/26/2011 04:13 PM, Gary Thomas wrote:
>>> On 01/26/2011 05:02 PM, Darren Hart wrote:
>>>> On 01/26/2011 02:07 PM, Gary Thomas wrote:
>>>>> On 01/26/2011 02:26 PM, Darren Hart wrote:
>>>>>> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>>>>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>>>>> so I could build a live/bootable image). Sadly, that's all I
>>>>>>> have is an image as I can't get it to run anywhere :-(
>>>>>>>
>>>>>>> * On my laptop (the point of this exercise) which is an older
>>>>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>>>>
>>>>>> Can you capture the output and provide some details on the hardware?
>>>>>
>>>>> Hard to do - I took pictures of the screen with my camera, the results
>>>>> may help, but won't win me a Pulitzer :-)
>>>>>
>>>>> On the AMD/2800+
>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
>>>>> On the old Pentium-III laptop
>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG
>>>>
>>>> Failing to mount the root partition either due to missing drivers for
>>>> the block device or the filesystem. You said this was MACHINE=atom-pc
>>>> and poky-image-sato-live? And you're
>>>> booting using the .iso image burned to a CD?
>>>
>>> Correct.
>>>
>>>>
>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG
>>>>
>>>> Too late, missed the good bits. I suspect the two above are adequate.
>>>>
>>>>>>
>>>>>>>
>>>>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>>>>> try...
>>>>>>
>>>>>> What happened? Some bios are very particular about usb layout, see
>>>>>> README.hardware under atom-pc. Some (including my netbook) require
>>>>>> that it be in USB-ZIP format, so you can't just dd the image to
>>>>>> the stick in some cases (unfortunately).
>>>>>
>>>>> My boot medium is a CD-RW with the ISO image.
>>>>> Not sure why it didn't want to boot before, but when I just retried
>>>>> it, it hung in yet a different way.
>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG
>>>>
>>>> If I'm reading this one correctly, it's failing to boot from the USB
>>>> device and later detects another drive (My Passport) which has
>>>> something other than a standard ext[23]
>>>> filesystem on the first partition.
>>>
>>> Same boot CD as above - I'm not sure what it's up to at this point.
>>
>> Check the .config in the linux-yocto build directory, does it have
>> CONFIG_ISO9660_FS set?
>
> Nope :-(
> $ grep ISO9660
> tmp/work/atom-pc-poky-linux/linux-yocto-stable-2.6.34+git0+e1f85a470934a0cf6abde5d95533e74501822c6b_0+72ca49ab08b8eb475cec82a10049503602325791-r1/linux-atom-pc-standard-build/.config
> # CONFIG_ISO9660_FS is not set
>
> I'll try forcing this and rebuild to test.

I've tried this, but I didn't see any change.  Perhaps I didn't
do it correctly.   Since all I wanted was to update the kernel
with a different configuration, here are the steps I executed:
   ... adjust config using makeconfig
   % rm -f sstate-cache/sstate-linux-yocto-stable-atom-pc*
   % bitbake virtual/kernel -f -c compile
   % bitbake poky-image-minimal-live

Any other ideas?

>>
>> I'll have a look in the morning as well.
>>
>

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-27 22:23             ` Gary Thomas
@ 2011-01-28 14:28               ` Gary Thomas
  2011-01-28 14:31                 ` Gary Thomas
  2011-01-28 14:35                 ` Bruce Ashfield
  0 siblings, 2 replies; 18+ messages in thread
From: Gary Thomas @ 2011-01-28 14:28 UTC (permalink / raw)
  To: Darren Hart; +Cc: Poky

On 01/27/2011 03:23 PM, Gary Thomas wrote:
> On 01/27/2011 05:47 AM, Gary Thomas wrote:
>> On 01/26/2011 08:30 PM, Darren Hart wrote:
>>> On 01/26/2011 04:13 PM, Gary Thomas wrote:
>>>> On 01/26/2011 05:02 PM, Darren Hart wrote:
>>>>> On 01/26/2011 02:07 PM, Gary Thomas wrote:
>>>>>> On 01/26/2011 02:26 PM, Darren Hart wrote:
>>>>>>> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>>>>>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>>>>>> so I could build a live/bootable image). Sadly, that's all I
>>>>>>>> have is an image as I can't get it to run anywhere :-(
>>>>>>>>
>>>>>>>> * On my laptop (the point of this exercise) which is an older
>>>>>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>>>>>
>>>>>>> Can you capture the output and provide some details on the hardware?
>>>>>>
>>>>>> Hard to do - I took pictures of the screen with my camera, the results
>>>>>> may help, but won't win me a Pulitzer :-)
>>>>>>
>>>>>> On the AMD/2800+
>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
>>>>>> On the old Pentium-III laptop
>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG
>>>>>
>>>>> Failing to mount the root partition either due to missing drivers for
>>>>> the block device or the filesystem. You said this was MACHINE=atom-pc
>>>>> and poky-image-sato-live? And you're
>>>>> booting using the .iso image burned to a CD?
>>>>
>>>> Correct.
>>>>
>>>>>
>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG
>>>>>
>>>>> Too late, missed the good bits. I suspect the two above are adequate.
>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>>>>>> try...
>>>>>>>
>>>>>>> What happened? Some bios are very particular about usb layout, see
>>>>>>> README.hardware under atom-pc. Some (including my netbook) require
>>>>>>> that it be in USB-ZIP format, so you can't just dd the image to
>>>>>>> the stick in some cases (unfortunately).
>>>>>>
>>>>>> My boot medium is a CD-RW with the ISO image.
>>>>>> Not sure why it didn't want to boot before, but when I just retried
>>>>>> it, it hung in yet a different way.
>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG
>>>>>
>>>>> If I'm reading this one correctly, it's failing to boot from the USB
>>>>> device and later detects another drive (My Passport) which has
>>>>> something other than a standard ext[23]
>>>>> filesystem on the first partition.
>>>>
>>>> Same boot CD as above - I'm not sure what it's up to at this point.
>>>
>>> Check the .config in the linux-yocto build directory, does it have
>>> CONFIG_ISO9660_FS set?
>>
>> Nope :-(
>> $ grep ISO9660
>> tmp/work/atom-pc-poky-linux/linux-yocto-stable-2.6.34+git0+e1f85a470934a0cf6abde5d95533e74501822c6b_0+72ca49ab08b8eb475cec82a10049503602325791-r1/linux-atom-pc-standard-build/.config
>>
>> # CONFIG_ISO9660_FS is not set
>>
>> I'll try forcing this and rebuild to test.
>
> I've tried this, but I didn't see any change. Perhaps I didn't
> do it correctly. Since all I wanted was to update the kernel
> with a different configuration, here are the steps I executed:
> ... adjust config using makeconfig
> % rm -f sstate-cache/sstate-linux-yocto-stable-atom-pc*
> % bitbake virtual/kernel -f -c compile
> % bitbake poky-image-minimal-live
>
> Any other ideas?

Still no joy booting from CD.  I did boot the HDD image on
multiple systems and it runs just fine.  The exact same ISO
on those hardware still fails.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-28 14:28               ` Gary Thomas
@ 2011-01-28 14:31                 ` Gary Thomas
  2011-01-28 14:43                   ` Bruce Ashfield
  2011-01-28 14:35                 ` Bruce Ashfield
  1 sibling, 1 reply; 18+ messages in thread
From: Gary Thomas @ 2011-01-28 14:31 UTC (permalink / raw)
  To: Darren Hart; +Cc: Poky

[-- Attachment #1: Type: text/plain, Size: 4076 bytes --]

On 01/28/2011 07:28 AM, Gary Thomas wrote:
> On 01/27/2011 03:23 PM, Gary Thomas wrote:
>> On 01/27/2011 05:47 AM, Gary Thomas wrote:
>>> On 01/26/2011 08:30 PM, Darren Hart wrote:
>>>> On 01/26/2011 04:13 PM, Gary Thomas wrote:
>>>>> On 01/26/2011 05:02 PM, Darren Hart wrote:
>>>>>> On 01/26/2011 02:07 PM, Gary Thomas wrote:
>>>>>>> On 01/26/2011 02:26 PM, Darren Hart wrote:
>>>>>>>> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>>>>>>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>>>>>>> so I could build a live/bootable image). Sadly, that's all I
>>>>>>>>> have is an image as I can't get it to run anywhere :-(
>>>>>>>>>
>>>>>>>>> * On my laptop (the point of this exercise) which is an older
>>>>>>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>>>>>>
>>>>>>>> Can you capture the output and provide some details on the hardware?
>>>>>>>
>>>>>>> Hard to do - I took pictures of the screen with my camera, the results
>>>>>>> may help, but won't win me a Pulitzer :-)
>>>>>>>
>>>>>>> On the AMD/2800+
>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
>>>>>>> On the old Pentium-III laptop
>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG
>>>>>>
>>>>>> Failing to mount the root partition either due to missing drivers for
>>>>>> the block device or the filesystem. You said this was MACHINE=atom-pc
>>>>>> and poky-image-sato-live? And you're
>>>>>> booting using the .iso image burned to a CD?
>>>>>
>>>>> Correct.
>>>>>
>>>>>>
>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG
>>>>>>
>>>>>> Too late, missed the good bits. I suspect the two above are adequate.
>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>>>>>>> try...
>>>>>>>>
>>>>>>>> What happened? Some bios are very particular about usb layout, see
>>>>>>>> README.hardware under atom-pc. Some (including my netbook) require
>>>>>>>> that it be in USB-ZIP format, so you can't just dd the image to
>>>>>>>> the stick in some cases (unfortunately).
>>>>>>>
>>>>>>> My boot medium is a CD-RW with the ISO image.
>>>>>>> Not sure why it didn't want to boot before, but when I just retried
>>>>>>> it, it hung in yet a different way.
>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG
>>>>>>
>>>>>> If I'm reading this one correctly, it's failing to boot from the USB
>>>>>> device and later detects another drive (My Passport) which has
>>>>>> something other than a standard ext[23]
>>>>>> filesystem on the first partition.
>>>>>
>>>>> Same boot CD as above - I'm not sure what it's up to at this point.
>>>>
>>>> Check the .config in the linux-yocto build directory, does it have
>>>> CONFIG_ISO9660_FS set?
>>>
>>> Nope :-(
>>> $ grep ISO9660
>>> tmp/work/atom-pc-poky-linux/linux-yocto-stable-2.6.34+git0+e1f85a470934a0cf6abde5d95533e74501822c6b_0+72ca49ab08b8eb475cec82a10049503602325791-r1/linux-atom-pc-standard-build/.config
>>>
>>>
>>> # CONFIG_ISO9660_FS is not set
>>>
>>> I'll try forcing this and rebuild to test.
>>
>> I've tried this, but I didn't see any change. Perhaps I didn't
>> do it correctly. Since all I wanted was to update the kernel
>> with a different configuration, here are the steps I executed:
>> ... adjust config using makeconfig
>> % rm -f sstate-cache/sstate-linux-yocto-stable-atom-pc*
>> % bitbake virtual/kernel -f -c compile
>> % bitbake poky-image-minimal-live
>>
>> Any other ideas?
>
> Still no joy booting from CD. I did boot the HDD image on
> multiple systems and it runs just fine. The exact same ISO
> on those hardware still fails.
>

BTW, the kernel config file I used (after running menuconfig)
is attached.

How/what can I diff to send a patch, once I get a working
kernel configuration?

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

[-- Attachment #2: atom-pc.config --]
[-- Type: text/plain, Size: 76071 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34.7
# Fri Jan 28 06:48:41 2011
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-yocto-standard"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_HAVE_GET_CYCLES=y
CONFIG_HAVE_TRACE_CLOCK=y
# CONFIG_HAVE_TRACE_CLOCK_GENERIC is not set
# CONFIG_HAVE_TRACE_CLOCK_32_TO_64 is not set
# CONFIG_HAVE_UNSYNCHRONIZED_TSC is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_OPROFILE_SYSCALL_TRAVERSE is not set
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
CONFIG_LTT=y
CONFIG_LTT_FILTER=m
CONFIG_HAVE_LTT_DUMP_TABLES=y
CONFIG_LTT_TRACER=y
CONFIG_LTT_RELAY_LOCKLESS=y
# CONFIG_LTT_RELAY_IRQOFF is not set
# CONFIG_LTT_RELAY_LOCKED is not set
CONFIG_LTT_SERIALIZE=y
CONFIG_LTT_FAST_SERIALIZE=y
CONFIG_LTT_TRACEPROBES=m
CONFIG_LTT_TRACE_CONTROL=y
CONFIG_LTT_ALIGNMENT=y
CONFIG_LTT_CHECK_ARCH_EFFICIENT_UNALIGNED_ACCESS=y
# CONFIG_LTT_DEBUG_EVENT_SIZE is not set
CONFIG_LTT_USERSPACE_EVENT=m
CONFIG_LTT_VMCORE=y
CONFIG_LTT_STATEDUMP=m
CONFIG_LTT_KPROBES=m
# CONFIG_LTT_ASCII is not set
CONFIG_HAVE_IMMEDIATE=y
CONFIG_IMMEDIATE=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_MRST is not set
# CONFIG_X86_RDC321X is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
# CONFIG_X86_UP_IOAPIC is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_SFI is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_VBUS_PROXY is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# CONFIG_DCB is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=m
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
# CONFIG_RAM_CONSOLE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_CS5536 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_ATL1E=y
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
CONFIG_CHELSIO_T4_DEPENDS=y
# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
CONFIG_ATH_COMMON=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K=y
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_AR9170_USB is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_WL12XX is not set
# CONFIG_ZD1211RW is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_VBUS_ENET is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# TI VLYNQ
#
CONFIG_STAGING=y
CONFIG_STAGING_EXCLUDE_BUILD=y
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_PRAMFS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
# CONFIG_VFAT_FS_NO_DUALNAMES is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_VFAT_NO_CREATE_WITH_LONGNAMES is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_AXFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_UNION_FS=y
# CONFIG_UNION_FS_XATTR is not set
# CONFIG_UNION_FS_DEBUG is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_DEF_FILE_IO_SIZE=4096
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS_PATH="/tftpboot/%s"
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_WRNOTE=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_WR_OCD_DEBUG is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_PSRWLOCK is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_HAVE_PSRWLOCK_ASM_CALL is not set
# CONFIG_PSRWLOCK_LATENCY_TEST is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_8250=m
CONFIG_KGDBOE=m
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
# CONFIG_KGDB_KDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_SECURITY_BSDJAIL=m
CONFIG_SECURITY_BSDJAIL_USE_NAMESPACE=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set

#
# OCF Configuration
#
CONFIG_OCF_OCF=m
CONFIG_OCF_RANDOMHARVEST=y
CONFIG_OCF_FIPS=y
CONFIG_OCF_CRYPTODEV=m
CONFIG_OCF_CRYPTOSOFT=m
# CONFIG_OCF_SAFE is not set
# CONFIG_OCF_HIFN is not set
# CONFIG_OCF_HIFNHIPP is not set
# CONFIG_OCF_EP80579 is not set
# CONFIG_OCF_CRYPTOCTEON is not set
# CONFIG_OCF_KIRKWOOD is not set
# CONFIG_OCF_C7108 is not set
CONFIG_OCF_OCFNULL=m
# CONFIG_OCF_BENCH is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VBUS is not set
# CONFIG_VBUS_VENETDEV is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
# CONFIG_SHM_SIGNAL is not set
# CONFIG_IOQ is not set

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-28 14:28               ` Gary Thomas
  2011-01-28 14:31                 ` Gary Thomas
@ 2011-01-28 14:35                 ` Bruce Ashfield
  1 sibling, 0 replies; 18+ messages in thread
From: Bruce Ashfield @ 2011-01-28 14:35 UTC (permalink / raw)
  To: Gary Thomas; +Cc: Poky

On Fri, Jan 28, 2011 at 9:28 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> On 01/27/2011 03:23 PM, Gary Thomas wrote:
>>
>> On 01/27/2011 05:47 AM, Gary Thomas wrote:
>>>
>>> On 01/26/2011 08:30 PM, Darren Hart wrote:
>>>>
>>>> On 01/26/2011 04:13 PM, Gary Thomas wrote:
>>>>>
>>>>> On 01/26/2011 05:02 PM, Darren Hart wrote:
>>>>>>
>>>>>> On 01/26/2011 02:07 PM, Gary Thomas wrote:
>>>>>>>
>>>>>>> On 01/26/2011 02:26 PM, Darren Hart wrote:
>>>>>>>>
>>>>>>>> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>>>>>>>>>
>>>>>>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>>>>>>> so I could build a live/bootable image). Sadly, that's all I
>>>>>>>>> have is an image as I can't get it to run anywhere :-(
>>>>>>>>>
>>>>>>>>> * On my laptop (the point of this exercise) which is an older
>>>>>>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>>>>>>
>>>>>>>> Can you capture the output and provide some details on the hardware?
>>>>>>>
>>>>>>> Hard to do - I took pictures of the screen with my camera, the
>>>>>>> results
>>>>>>> may help, but won't win me a Pulitzer :-)
>>>>>>>
>>>>>>> On the AMD/2800+
>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
>>>>>>> On the old Pentium-III laptop
>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG
>>>>>>
>>>>>> Failing to mount the root partition either due to missing drivers for
>>>>>> the block device or the filesystem. You said this was MACHINE=atom-pc
>>>>>> and poky-image-sato-live? And you're
>>>>>> booting using the .iso image burned to a CD?
>>>>>
>>>>> Correct.
>>>>>
>>>>>>
>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG
>>>>>>
>>>>>> Too late, missed the good bits. I suspect the two above are adequate.
>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>>>>>>> try...
>>>>>>>>
>>>>>>>> What happened? Some bios are very particular about usb layout, see
>>>>>>>> README.hardware under atom-pc. Some (including my netbook) require
>>>>>>>> that it be in USB-ZIP format, so you can't just dd the image to
>>>>>>>> the stick in some cases (unfortunately).
>>>>>>>
>>>>>>> My boot medium is a CD-RW with the ISO image.
>>>>>>> Not sure why it didn't want to boot before, but when I just retried
>>>>>>> it, it hung in yet a different way.
>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG
>>>>>>
>>>>>> If I'm reading this one correctly, it's failing to boot from the USB
>>>>>> device and later detects another drive (My Passport) which has
>>>>>> something other than a standard ext[23]
>>>>>> filesystem on the first partition.
>>>>>
>>>>> Same boot CD as above - I'm not sure what it's up to at this point.
>>>>
>>>> Check the .config in the linux-yocto build directory, does it have
>>>> CONFIG_ISO9660_FS set?
>>>
>>> Nope :-(
>>> $ grep ISO9660
>>>
>>> tmp/work/atom-pc-poky-linux/linux-yocto-stable-2.6.34+git0+e1f85a470934a0cf6abde5d95533e74501822c6b_0+72ca49ab08b8eb475cec82a10049503602325791-r1/linux-atom-pc-standard-build/.config
>>>
>>> # CONFIG_ISO9660_FS is not set
>>>
>>> I'll try forcing this and rebuild to test.
>>
>> I've tried this, but I didn't see any change. Perhaps I didn't
>> do it correctly. Since all I wanted was to update the kernel
>> with a different configuration, here are the steps I executed:
>> ... adjust config using makeconfig
>> % rm -f sstate-cache/sstate-linux-yocto-stable-atom-pc*
>> % bitbake virtual/kernel -f -c compile
>> % bitbake poky-image-minimal-live
>>
>> Any other ideas?
>
> Still no joy booting from CD.  I did boot the HDD image on
> multiple systems and it runs just fine.  The exact same ISO
> on those hardware still fails.

Interesting. I'll try the same thing here today.

Bruce

>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
>



-- 
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-28 14:31                 ` Gary Thomas
@ 2011-01-28 14:43                   ` Bruce Ashfield
  2011-01-29 13:25                     ` Gary Thomas
  0 siblings, 1 reply; 18+ messages in thread
From: Bruce Ashfield @ 2011-01-28 14:43 UTC (permalink / raw)
  To: Gary Thomas; +Cc: Poky

On Fri, Jan 28, 2011 at 9:31 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> On 01/28/2011 07:28 AM, Gary Thomas wrote:
>>
>> On 01/27/2011 03:23 PM, Gary Thomas wrote:
>>>
>>> On 01/27/2011 05:47 AM, Gary Thomas wrote:
>>>>
>>>> On 01/26/2011 08:30 PM, Darren Hart wrote:
>>>>>
>>>>> On 01/26/2011 04:13 PM, Gary Thomas wrote:
>>>>>>
>>>>>> On 01/26/2011 05:02 PM, Darren Hart wrote:
>>>>>>>
>>>>>>> On 01/26/2011 02:07 PM, Gary Thomas wrote:
>>>>>>>>
>>>>>>>> On 01/26/2011 02:26 PM, Darren Hart wrote:
>>>>>>>>>
>>>>>>>>> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>>>>>>>>>>
>>>>>>>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>>>>>>>> so I could build a live/bootable image). Sadly, that's all I
>>>>>>>>>> have is an image as I can't get it to run anywhere :-(
>>>>>>>>>>
>>>>>>>>>> * On my laptop (the point of this exercise) which is an older
>>>>>>>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>>>>>>>
>>>>>>>>> Can you capture the output and provide some details on the
>>>>>>>>> hardware?
>>>>>>>>
>>>>>>>> Hard to do - I took pictures of the screen with my camera, the
>>>>>>>> results
>>>>>>>> may help, but won't win me a Pulitzer :-)
>>>>>>>>
>>>>>>>> On the AMD/2800+
>>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
>>>>>>>> On the old Pentium-III laptop
>>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG
>>>>>>>
>>>>>>> Failing to mount the root partition either due to missing drivers for
>>>>>>> the block device or the filesystem. You said this was MACHINE=atom-pc
>>>>>>> and poky-image-sato-live? And you're
>>>>>>> booting using the .iso image burned to a CD?
>>>>>>
>>>>>> Correct.
>>>>>>
>>>>>>>
>>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG
>>>>>>>
>>>>>>> Too late, missed the good bits. I suspect the two above are adequate.
>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>>>>>>>> try...
>>>>>>>>>
>>>>>>>>> What happened? Some bios are very particular about usb layout, see
>>>>>>>>> README.hardware under atom-pc. Some (including my netbook) require
>>>>>>>>> that it be in USB-ZIP format, so you can't just dd the image to
>>>>>>>>> the stick in some cases (unfortunately).
>>>>>>>>
>>>>>>>> My boot medium is a CD-RW with the ISO image.
>>>>>>>> Not sure why it didn't want to boot before, but when I just retried
>>>>>>>> it, it hung in yet a different way.
>>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG
>>>>>>>
>>>>>>> If I'm reading this one correctly, it's failing to boot from the USB
>>>>>>> device and later detects another drive (My Passport) which has
>>>>>>> something other than a standard ext[23]
>>>>>>> filesystem on the first partition.
>>>>>>
>>>>>> Same boot CD as above - I'm not sure what it's up to at this point.
>>>>>
>>>>> Check the .config in the linux-yocto build directory, does it have
>>>>> CONFIG_ISO9660_FS set?
>>>>
>>>> Nope :-(
>>>> $ grep ISO9660
>>>>
>>>> tmp/work/atom-pc-poky-linux/linux-yocto-stable-2.6.34+git0+e1f85a470934a0cf6abde5d95533e74501822c6b_0+72ca49ab08b8eb475cec82a10049503602325791-r1/linux-atom-pc-standard-build/.config
>>>>
>>>>
>>>> # CONFIG_ISO9660_FS is not set
>>>>
>>>> I'll try forcing this and rebuild to test.
>>>
>>> I've tried this, but I didn't see any change. Perhaps I didn't
>>> do it correctly. Since all I wanted was to update the kernel
>>> with a different configuration, here are the steps I executed:
>>> ... adjust config using makeconfig
>>> % rm -f sstate-cache/sstate-linux-yocto-stable-atom-pc*
>>> % bitbake virtual/kernel -f -c compile
>>> % bitbake poky-image-minimal-live
>>>
>>> Any other ideas?
>>
>> Still no joy booting from CD. I did boot the HDD image on
>> multiple systems and it runs just fine. The exact same ISO
>> on those hardware still fails.
>>
>
> BTW, the kernel config file I used (after running menuconfig)
> is attached.
>
> How/what can I diff to send a patch, once I get a working
> kernel configuration?

The location differs between the 2.6.34 and 2.6.37 kernel (since things
are being generalized).

You'll find the base configuration for the atom-pc in 2.6.34 in your
'linux-yocto-stable-2.6.34+git0+e1f85a470934a0cf6abde5d95533e74501822c6b_0+72ca49ab08b8eb475cec82a10049503602325791-r1/linux'
(that's a mouthful) directory.  On the wrs_meta branch.

Then you'll find: wrs/cfg/kernel-cache/bsp/atom-pc/boot-live.cfg

If you send a diff against that, we can merge and make the change
permanent (assuming it is suitable for general use).

Cheers,

Bruce

>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
>
>



-- 
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: No joy on "standard" PC
  2011-01-28 14:43                   ` Bruce Ashfield
@ 2011-01-29 13:25                     ` Gary Thomas
  0 siblings, 0 replies; 18+ messages in thread
From: Gary Thomas @ 2011-01-29 13:25 UTC (permalink / raw)
  To: Bruce Ashfield; +Cc: Poky

On 01/28/2011 07:43 AM, Bruce Ashfield wrote:
> On Fri, Jan 28, 2011 at 9:31 AM, Gary Thomas<gary@mlbassoc.com>  wrote:
>> On 01/28/2011 07:28 AM, Gary Thomas wrote:
>>>
>>> On 01/27/2011 03:23 PM, Gary Thomas wrote:
>>>>
>>>> On 01/27/2011 05:47 AM, Gary Thomas wrote:
>>>>>
>>>>> On 01/26/2011 08:30 PM, Darren Hart wrote:
>>>>>>
>>>>>> On 01/26/2011 04:13 PM, Gary Thomas wrote:
>>>>>>>
>>>>>>> On 01/26/2011 05:02 PM, Darren Hart wrote:
>>>>>>>>
>>>>>>>> On 01/26/2011 02:07 PM, Gary Thomas wrote:
>>>>>>>>>
>>>>>>>>> On 01/26/2011 02:26 PM, Darren Hart wrote:
>>>>>>>>>>
>>>>>>>>>> On 01/26/2011 05:43 AM, Gary Thomas wrote:
>>>>>>>>>>>
>>>>>>>>>>> I finally got Poky to build for a standard PC (actually atom-pc
>>>>>>>>>>> so I could build a live/bootable image). Sadly, that's all I
>>>>>>>>>>> have is an image as I can't get it to run anywhere :-(
>>>>>>>>>>>
>>>>>>>>>>> * On my laptop (the point of this exercise) which is an older
>>>>>>>>>>> Pentium-III machine, the kernel crashes almost immediately.
>>>>>>>>>>
>>>>>>>>>> Can you capture the output and provide some details on the
>>>>>>>>>> hardware?
>>>>>>>>>
>>>>>>>>> Hard to do - I took pictures of the screen with my camera, the
>>>>>>>>> results
>>>>>>>>> may help, but won't win me a Pulitzer :-)
>>>>>>>>>
>>>>>>>>> On the AMD/2800+
>>>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000630.JPG
>>>>>>>>> On the old Pentium-III laptop
>>>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000631.JPG
>>>>>>>>
>>>>>>>> Failing to mount the root partition either due to missing drivers for
>>>>>>>> the block device or the filesystem. You said this was MACHINE=atom-pc
>>>>>>>> and poky-image-sato-live? And you're
>>>>>>>> booting using the .iso image burned to a CD?
>>>>>>>
>>>>>>> Correct.
>>>>>>>
>>>>>>>>
>>>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000632.JPG
>>>>>>>>
>>>>>>>> Too late, missed the good bits. I suspect the two above are adequate.
>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> * On my brand new laptop (Core-i3), I couldn't get it to even
>>>>>>>>>>> try...
>>>>>>>>>>
>>>>>>>>>> What happened? Some bios are very particular about usb layout, see
>>>>>>>>>> README.hardware under atom-pc. Some (including my netbook) require
>>>>>>>>>> that it be in USB-ZIP format, so you can't just dd the image to
>>>>>>>>>> the stick in some cases (unfortunately).
>>>>>>>>>
>>>>>>>>> My boot medium is a CD-RW with the ISO image.
>>>>>>>>> Not sure why it didn't want to boot before, but when I just retried
>>>>>>>>> it, it hung in yet a different way.
>>>>>>>>> http://www.mlbassoc.com/poky/BootFailures/P1000629.JPG
>>>>>>>>
>>>>>>>> If I'm reading this one correctly, it's failing to boot from the USB
>>>>>>>> device and later detects another drive (My Passport) which has
>>>>>>>> something other than a standard ext[23]
>>>>>>>> filesystem on the first partition.
>>>>>>>
>>>>>>> Same boot CD as above - I'm not sure what it's up to at this point.
>>>>>>
>>>>>> Check the .config in the linux-yocto build directory, does it have
>>>>>> CONFIG_ISO9660_FS set?
>>>>>
>>>>> Nope :-(
>>>>> $ grep ISO9660
>>>>>
>>>>> tmp/work/atom-pc-poky-linux/linux-yocto-stable-2.6.34+git0+e1f85a470934a0cf6abde5d95533e74501822c6b_0+72ca49ab08b8eb475cec82a10049503602325791-r1/linux-atom-pc-standard-build/.config
>>>>>
>>>>>
>>>>> # CONFIG_ISO9660_FS is not set
>>>>>
>>>>> I'll try forcing this and rebuild to test.
>>>>
>>>> I've tried this, but I didn't see any change. Perhaps I didn't
>>>> do it correctly. Since all I wanted was to update the kernel
>>>> with a different configuration, here are the steps I executed:
>>>> ... adjust config using makeconfig
>>>> % rm -f sstate-cache/sstate-linux-yocto-stable-atom-pc*
>>>> % bitbake virtual/kernel -f -c compile
>>>> % bitbake poky-image-minimal-live
>>>>
>>>> Any other ideas?
>>>
>>> Still no joy booting from CD. I did boot the HDD image on
>>> multiple systems and it runs just fine. The exact same ISO
>>> on those hardware still fails.
>>>
>>
>> BTW, the kernel config file I used (after running menuconfig)
>> is attached.
>>
>> How/what can I diff to send a patch, once I get a working
>> kernel configuration?
>
> The location differs between the 2.6.34 and 2.6.37 kernel (since things
> are being generalized).
>
> You'll find the base configuration for the atom-pc in 2.6.34 in your
> 'linux-yocto-stable-2.6.34+git0+e1f85a470934a0cf6abde5d95533e74501822c6b_0+72ca49ab08b8eb475cec82a10049503602325791-r1/linux'
> (that's a mouthful) directory.  On the wrs_meta branch.
>
> Then you'll find: wrs/cfg/kernel-cache/bsp/atom-pc/boot-live.cfg
>
> If you send a diff against that, we can merge and make the change
> permanent (assuming it is suitable for general use).

This now bug #686 (http://bugzilla.pokylinux.org/show_bug.cgi?id=686)

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


^ permalink raw reply	[flat|nested] 18+ messages in thread
end of thread, other threads:[~2011-01-29 13:25 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-01-26 13:43 No joy on "standard" PC Gary Thomas
2011-01-26 13:50 ` Gary Thomas
2011-01-26 13:58   ` Bruce Ashfield
2011-01-26 14:17     ` Gary Thomas
2011-01-26 14:24       ` Bruce Ashfield
2011-01-26 21:22         ` Bruce Ashfield
2011-01-26 21:26 ` Darren Hart
2011-01-26 22:07   ` Gary Thomas
2011-01-27  0:02     ` Darren Hart
2011-01-27  0:13       ` Gary Thomas
2011-01-27  3:30         ` Darren Hart
2011-01-27 12:47           ` Gary Thomas
2011-01-27 22:23             ` Gary Thomas
2011-01-28 14:28               ` Gary Thomas
2011-01-28 14:31                 ` Gary Thomas
2011-01-28 14:43                   ` Bruce Ashfield
2011-01-29 13:25                     ` Gary Thomas
2011-01-28 14:35                 ` Bruce Ashfield

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.