* [U-Boot] merge conflicts during git pull
@ 2011-02-11 15:30 Andre Schwarz
2011-02-11 19:13 ` Wolfgang Denk
0 siblings, 1 reply; 4+ messages in thread
From: Andre Schwarz @ 2011-02-11 15:30 UTC (permalink / raw)
To: u-boot
Wolfgang,
just wanted to update my local U-Boot master branch an got some errors I
don't understand (since I'm still a git newbie).
This is what I have:
git originally cloned from public repo - thus I have in .git/config :
[remote "origin"]
fetch = +refs/heads/*:refs/remotes/origin/*
url = git://www.denx.de/git/u-boot.git
The master branch gets *never* touched.
All my work is done in board specific branches.
"git branch -a" gives :
M7
MergerBox
* master
remotes/origin/HEAD -> origin/master
remotes/origin/GPL-Cleanup
remotes/origin/i.MX31
remotes/origin/lwmon5
remotes/origin/master
remotes/origin/next
remotes/origin/tx25
remotes/origin/u-boot-2009.11.y
Currently the repo is clean, i.e. everything committed and I did a "git
co master" and "git pull".
I get a lot of conflicts on files I definitely never touched :
# Unmerged paths:
# (use "git add/rm <file>..." as appropriate to mark resolution)
#
# both modified: arch/arm/config.mk
# both modified: arch/arm/cpu/arm1136/mx35/Makefile
# both modified: arch/arm/cpu/arm1176/start.S
# both modified: arch/arm/cpu/arm720t/start.S
# both modified: arch/arm/cpu/arm920t/start.S
# both modified: arch/arm/cpu/arm925t/start.S
# added by them: arch/arm/cpu/arm926ejs/armada100/Makefile
# both modified: arch/arm/cpu/arm946es/start.S
# both modified: arch/arm/cpu/arm_intcm/start.S
# both modified: arch/arm/cpu/armv7/omap3/emif4.c
# both modified: arch/arm/cpu/ixp/start.S
# both modified: arch/arm/cpu/lh7a40x/start.S
# both modified: arch/arm/cpu/s3c44b0/start.S
# both modified: arch/arm/cpu/sa1100/start.S
# both modified: arch/arm/include/asm/arch-mx25/imx-regs.h
# both modified: arch/arm/include/asm/arch-mx5/imx-regs.h
# both modified: arch/powerpc/config.mk
# both added: arch/powerpc/cpu/74xx_7xx/u-boot.lds
# both modified: arch/powerpc/cpu/mpc512x/u-boot.lds
# both modified: arch/powerpc/cpu/mpc5xx/u-boot.lds
# both modified: arch/powerpc/cpu/mpc5xxx/u-boot.lds
# both modified: arch/powerpc/cpu/mpc8220/u-boot.lds
# both modified: arch/powerpc/cpu/mpc824x/u-boot.lds
# both modified: arch/powerpc/cpu/mpc8260/u-boot.lds
# both modified: arch/powerpc/cpu/mpc83xx/u-boot.lds
# both modified: arch/powerpc/cpu/ppc4xx/u-boot.lds
# both modified: arch/powerpc/include/asm/config.h
# deleted by them: board/atum8548/atum8548.c
# added by them: board/cm_t35/Makefile
# added by us: board/dave/PPChameleonEVB/u-boot.lds
# both modified: board/davinci/common/misc.c
# both modified: board/emk/top9000/Makefile
# both modified: board/freescale/corenet_ds/pci.c
# both deleted: board/freescale/mpc7448hpc2/u-boot.lds
# both modified: board/freescale/mpc8536ds/mpc8536ds.c
# both modified: board/freescale/mpc8544ds/mpc8544ds.c
# both modified: board/freescale/mpc8548cds/mpc8548cds.c
.....
Have I missed anything ?
Is there a way to get automagically merged whatever there might be to
merge ?
Any help is welcome.
--
Regards,
Andre
MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] merge conflicts during git pull
2011-02-11 15:30 [U-Boot] merge conflicts during git pull Andre Schwarz
@ 2011-02-11 19:13 ` Wolfgang Denk
2011-02-14 9:05 ` Andre Schwarz
0 siblings, 1 reply; 4+ messages in thread
From: Wolfgang Denk @ 2011-02-11 19:13 UTC (permalink / raw)
To: u-boot
Dear Andre,
In message <4D555611.2040907@matrix-vision.de> you wrote:
>
> just wanted to update my local U-Boot master branch an got some errors I
> don't understand (since I'm still a git newbie).
...
> Currently the repo is clean, i.e. everything committed and I did a "git
> co master" and "git pull".
> I get a lot of conflicts on files I definitely never touched :
...
> Have I missed anything ?
> Is there a way to get automagically merged whatever there might be to
> merge ?
Sorry, I have no idea what happenend of your system. I can see no
issues on our side.
Here is what the top of tree of the master branch should look like for
you:
==> (HEAD, origin/master, origin/HEAD, custodians/master, custodians/HEAD, master)
494a7d2 2011-02-09 21:22:58 +0100 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
65b57eb 2011-02-09 20:54:53 +0100 Merge branch 'next' of git://git.denx.de/u-boot-nios
fced09a 2011-02-09 20:50:26 +0100 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
eef1d71 2011-02-08 15:25:02 -0600 NAND: env: remember the flags used in the previous environment
d8a593c 2011-02-08 08:29:53 -0500 nios2: add gpio_is_valid
85debef 2011-02-08 08:29:53 -0500 nios2: use long for ssize_t
df8f125 2011-02-08 08:29:53 -0500 altera_spi: add spi_set_speed
e91d545 2011-02-08 08:29:53 -0500 nios2: add gpio_free
2da0fc0 2011-02-07 11:13:16 +0100 ppc4xx: Add DLVision-10G board support
8d4addc 2011-02-06 22:41:53 +0100 Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
367c665 2011-02-06 22:39:50 +0100 Merge branch 'master' of git://git.denx.de/u-boot-usb
e9e481f 2011-02-06 22:28:34 +0100 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
26e5f79 2011-02-05 17:06:57 -0600 mpc83xx: Use correct register to calculate clocks.
10fa8d7 2011-02-05 17:01:52 -0600 mpc83xx: fix pcie configuration space read/write
ce297a8 2011-02-05 13:54:51 +0100 USB: Change the necessary defines to get debug output
cb44091 2011-02-05 13:54:51 +0100 USB: Fix device stati for removable and powerctrl (typo)
f69b980 2011-02-04 21:44:46 +0100 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
04a641d 2011-02-04 14:04:21 -0600 powerpc/8xxx: Fix possible compile issue related to P1013
4bfa18f 2011-02-04 20:38:27 +0100 Merge branch 'master' of git://git.denx.de/u-boot-sh
d34897d 2011-02-03 02:46:13 -0600 powerpc/85xx: Enable ECC on MPC8572DS
9167191 2011-02-03 02:46:13 -0600 powerpc/mpc85xx: implement workaround for errata DDR111 and DDR134
eb0aff7 2011-02-03 02:46:13 -0600 powerpc/85xx: Rename MPC8572 DDR erratum to DDR115
67f9447 2011-02-03 02:46:13 -0600 powerpc/85xx: Enable Errata command on MPC8572DS
e1df0de 2011-02-03 02:46:12 -0600 powerpc/85xx: Remove unnecessary polling loop from DDR init
5103a03 2011-02-03 02:46:12 -0600 fsl_esdhc: Add the workaround for erratum ESDHC-A001 (enable on P2020)
6e7f0bc 2011-02-03 02:46:12 -0600 powerpc/85xx: Enable ESDHC111 Erratum on P2010/P2020 SoCs
e72f467 2011-02-03 16:54:19 +0900 sh: sh7785lcr: Fix out of tree building
920a5dd 2011-02-02 16:14:08 -0600 NAND: Fix saving of redundand environment
==> (v2011.03-rc1)
42d44f6 2011-02-02 22:37:32 +0100 Prepare v2011.03-rc1
...
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
For every complex problem, there is a solution that is simple, neat,
and wrong. - Mark Twain
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] merge conflicts during git pull
2011-02-11 19:13 ` Wolfgang Denk
@ 2011-02-14 9:05 ` Andre Schwarz
2011-02-14 10:07 ` Albert ARIBAUD
0 siblings, 1 reply; 4+ messages in thread
From: Andre Schwarz @ 2011-02-14 9:05 UTC (permalink / raw)
To: u-boot
Wolfgang,
....
>> Have I missed anything ?
>> Is there a way to get automagically merged whatever there might be to
>> merge ?
> Sorry, I have no idea what happenend of your system. I can see no
> issues on our side.
thank - will clone a new repo an pull in my local branches.
--
Regards,
Andre
MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] merge conflicts during git pull
2011-02-14 9:05 ` Andre Schwarz
@ 2011-02-14 10:07 ` Albert ARIBAUD
0 siblings, 0 replies; 4+ messages in thread
From: Albert ARIBAUD @ 2011-02-14 10:07 UTC (permalink / raw)
To: u-boot
Le 14/02/2011 10:05, Andre Schwarz a ?crit :
> Wolfgang,
>
>
> ....
>>> Have I missed anything ?
>>> Is there a way to get automagically merged whatever there might be to
>>> merge ?
>> Sorry, I have no idea what happenend of your system. I can see no
>> issues on our side.
>
> thank - will clone a new repo an pull in my local branches.
Just a side note: I tend to prefer git fetch over git pull, because I am
sure that I don't affect my working branch unless I really want to, at
which point I do it voluntarily and in a controlled manner, through git
rebase or git merge, and even then, I often tag my branch beforehand so
that I cen easily double-check the actions and revert them as/if needed.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-02-14 10:07 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-02-11 15:30 [U-Boot] merge conflicts during git pull Andre Schwarz
2011-02-11 19:13 ` Wolfgang Denk
2011-02-14 9:05 ` Andre Schwarz
2011-02-14 10:07 ` Albert ARIBAUD
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.