* [U-Boot] [PATCH 1/3] mp2usb: remove board support
@ 2011-04-03 16:35 Eric Bénard
2011-04-03 16:35 ` [U-Boot] [PATCH 2/3] cpu9260: update " Eric Bénard
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Eric Bénard @ 2011-04-03 16:35 UTC (permalink / raw)
To: u-boot
this board was cancelled long time ago so remove it as it won't
be maintained anymore
Signed-off-by: Eric B?nard <eric@eukrea.com>
---
board/mp2usb/Makefile | 50 -----
board/mp2usb/config.mk | 3 -
board/mp2usb/flash.c | 552 ----------------------------------------------
board/mp2usb/mp2usb.c | 98 --------
boards.cfg | 1 -
include/configs/mp2usb.h | 242 --------------------
6 files changed, 0 insertions(+), 946 deletions(-)
delete mode 100644 board/mp2usb/Makefile
delete mode 100644 board/mp2usb/config.mk
delete mode 100644 board/mp2usb/flash.c
delete mode 100644 board/mp2usb/mp2usb.c
delete mode 100644 include/configs/mp2usb.h
diff --git a/board/mp2usb/Makefile b/board/mp2usb/Makefile
deleted file mode 100644
index 335734a..0000000
--- a/board/mp2usb/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := mp2usb.o flash.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mp2usb/config.mk b/board/mp2usb/config.mk
deleted file mode 100644
index 948e4ff..0000000
--- a/board/mp2usb/config.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x27F00000
-## For testing: load at 0x20100000 and "go" at 0x201000A4
-#CONFIG_SYS_TEXT_BASE = 0x20100000
diff --git a/board/mp2usb/flash.c b/board/mp2usb/flash.c
deleted file mode 100644
index 21a8ef9..0000000
--- a/board/mp2usb/flash.c
+++ /dev/null
@@ -1,552 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
- * ebenard at eukrea.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) __swab16(x)
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/* Intel-compatible flash commands */
-#define INTEL_PROGRAM 0x00100010
-#define INTEL_ERASE 0x00200020
-#define INTEL_PROG 0x00400040
-#define INTEL_CLEAR 0x00500050
-#define INTEL_LOCKBIT 0x00600060
-#define INTEL_PROTECT 0x00010001
-#define INTEL_STATUS 0x00700070
-#define INTEL_READID 0x00900090
-#define INTEL_SUSPEND 0x00B000B0
-#define INTEL_CONFIRM 0x00D000D0
-#define INTEL_RESET 0xFFFFFFFF
-
-/* Intel-compatible flash status bits */
-#define INTEL_FINISHED 0x00800080
-#define INTEL_OK 0x00800080
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
- break;
- default:
- panic ("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0] );
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F640J3A:
- printf ("28F640J3A\n");
- break;
- case FLASH_28F128J3A:
- printf ("28F128J3A\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
-{
- volatile FPW value;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW) 0x00AA00AA;
- addr[0x2AAA] = (FPW) 0x00550055;
- addr[0x5555] = (FPW) 0x00900090;
-
- mb ();
- value = addr[0];
-
- switch (value) {
-
- case (FPW) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW) INTEL_RESET; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb ();
- value = addr[1]; /* device ID */
-
- switch (value) {
-
- case (FPW) INTEL_ID_28F640J3A:
- info->flash_id += FLASH_28F640J3A;
- info->sector_count = 64;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case (FPW) INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x01000000;
- break; /* => 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW) INTEL_RESET; /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- int prot, sect;
- ulong type, start, last;
- int rcode = 0;
- int cflag, iflag;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- start = get_timer (0);
- last = start;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- /* Disable interrupts which might cause a timeout here */
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *) (info->start[sect]);
- FPW status;
-
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- *addr = (FPW) INTEL_CLEAR; /* clear status register */
- *addr = (FPW) INTEL_ERASE; /* erase setup */
- *addr = (FPW) INTEL_CONFIRM; /* erase confirm */
-
- while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
- if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = (FPW) INTEL_SUSPEND; /* suspend erase */
- *addr = (FPW) INTEL_RESET; /* reset to read mode */
- rcode = 1;
- break;
- }
- }
-
- *addr = (FPWV)INTEL_CLEAR; /* clear status register cmd. */
- *addr = (FPWV)INTEL_RESET; /* resest to read mode */
-
- printf (" done\n");
- }
- }
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-
- /* get lower word aligned address */
- wp = (addr & ~1);
- port_width = 2;
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *) dest;
- ulong status;
- int cflag, iflag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%lx)\n", (ulong) addr, (ulong) *addr);
- return (2);
- }
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- *@address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- /* Disable interrupts which might cause a timeout here */
- iflag = disable_interrupts ();
-
- *addr = (FPW) INTEL_PROG; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- /* wait while polling the status register */
- while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
- if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW) INTEL_RESET; /* restore read mode */
- return (1);
- }
- }
-
- *addr = (FPW) INTEL_RESET; /* restore read mode */
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return (0);
-}
-
-void inline spin_wheel (void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf ("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
-
-/*-----------------------------------------------------------------------
- * Set/Clear sector's lock bit, returns:
- * 0 - OK
- * 1 - Error (timeout, voltage problems, etc.)
- */
-int flash_real_protect(flash_info_t *info, long sector, int prot)
-{
- int i;
- int rc = 0;
- FPWV *addr = (FPWV *)(info->start[sector]);
- int flag = disable_interrupts();
-
- *addr = (FPW) INTEL_CLEAR; /* Clear status register */
- if (prot) { /* Set sector lock bit */
- *addr = (FPW) INTEL_LOCKBIT; /* Sector lock bit */
- *addr = (FPW) INTEL_PROTECT; /* set */
- }
- else { /* Clear sector lock bit */
- *addr = (FPW) INTEL_LOCKBIT; /* All sectors lock bits */
- *addr = (FPW) INTEL_CONFIRM; /* clear */
- }
-
- reset_timer_masked ();
-
- while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
- if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
- printf("Flash lock bit operation timed out\n");
- rc = 1;
- break;
- }
- }
-
- if (*addr != (FPW) INTEL_OK) {
- printf("Flash lock bit operation failed at %08X, CSR=%08X\n",
- (uint)addr, (uint)*addr);
- rc = 1;
- }
-
- if (!rc)
- info->protect[sector] = prot;
-
- /*
- * Clear lock bit command clears all sectors lock bits, so
- * we have to restore lock bits of protected sectors.
- */
- if (!prot)
- {
- for (i = 0; i < info->sector_count; i++)
- {
- if (info->protect[i])
- {
- reset_timer_masked ();
- addr = (FPWV *) (info->start[i]);
- *addr = (FPW) INTEL_LOCKBIT; /* Sector lock bit */
- *addr = (FPW) INTEL_PROTECT; /* set */
- while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED)
- {
- if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT)
- {
- printf("Flash lock bit operation timed out\n");
- rc = 1;
- break;
- }
- }
- }
- }
- }
-
- if (flag)
- enable_interrupts();
-
- *addr = (FPW) INTEL_RESET; /* Reset to read array mode */
-
- return rc;
-}
diff --git a/board/mp2usb/mp2usb.c b/board/mp2usb/mp2usb.c
deleted file mode 100644
index e5eba6b..0000000
--- a/board/mp2usb/mp2usb.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
- * ebenard at eukrea.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-#include <netdev.h>
-#include <asm/io.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Enable Ctrlc */
- console_init_f ();
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of MP2USB-Board. */
- gd->bd->bi_arch_number = MACH_TYPE_MP2USB;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = dm9161_InitPhy;
- p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
- p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
- p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index 45c3102..105c748 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -56,7 +56,6 @@ cmc_pu2 arm arm920t - -
csb637 arm arm920t - - at91rm9200
kb9202 arm arm920t - - at91rm9200
m501sk arm arm920t - - at91rm9200
-mp2usb arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
mx1fs2 arm arm920t - - imx
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
deleted file mode 100644
index 8e398d7..0000000
--- a/include/configs/mp2usb.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * 2004-2005 Gary Jennejohn <garyj@denx.de>
- *
- * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
- * ebenard at eukrea.com
- *
- * Configuration settings for the MP2USB board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */
-#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
-#define CONFIG_MP2USB 1 /* on an MP2USB Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SYS_ATMEL_PLL_INIT_BUG 1
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x1048bE0E /* 48 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x3211295A /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000020 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_USB_KEYBOARD 1
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_AT91C_PQFP_UHPBUG 1
-
-#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
-
-#undef CONFIG_HARD_I2C
-
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 0 /* not used */
-#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
-#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x32
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-#endif
-/* still about 20 kB free with this defined */
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_BOOTDELAY 3
-
-#if !defined(CONFIG_HARD_I2C)
-#define CONFIG_TIMESTAMP
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-#if defined(CONFIG_HARD_I2C)
-
- #define CONFIG_CMD_DATE
- #define CONFIG_CMD_EEPROM
- #define CONFIG_CMD_I2C
- #define CONFIG_CMD_MISC
-
-#else
-
- #define CONFIG_CMD_CACHE
- #define CONFIG_CMD_USB
-
- #undef CONFIG_CMD_BDI
- #undef CONFIG_CMD_FPGA
- #undef CONFIG_CMD_IMI
- #undef CONFIG_CMD_LOADS
- #undef CONFIG_CMD_MISC
- #undef CONFIG_CMD_SOURCE
-
-#endif
-
-
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-#undef CONFIG_AT91C_USE_RMII
-
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x1000000 /* 16 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-#define CONFIG_SYS_FLASH_LOCK_TOUT (10*CONFIG_SYS_HZ) /* Timeout for Flash Set Lock Bit */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT (10*CONFIG_SYS_HZ) /* Timeout for Flash Clear Lock Bits */
-#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x20000
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
-
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enble null device */
-#undef CONFIG_SILENT_CONSOLE /* enable silent startup */
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT \
- "Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR " "
-#define CONFIG_AUTOBOOT_DELAY_STR "d"
-
-#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-
-#endif /* __CONFIG_H */
--
1.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH 2/3] cpu9260: update board support
2011-04-03 16:35 [U-Boot] [PATCH 1/3] mp2usb: remove board support Eric Bénard
@ 2011-04-03 16:35 ` Eric Bénard
2011-04-15 13:49 ` Eric Bénard
2011-04-16 7:26 ` Albert ARIBAUD
2011-04-03 16:35 ` [U-Boot] [PATCH 3/3] cpuat91: fix " Eric Bénard
2011-04-27 20:00 ` [U-Boot] [PATCH 1/3] mp2usb: remove " Wolfgang Denk
2 siblings, 2 replies; 13+ messages in thread
From: Eric Bénard @ 2011-04-03 16:35 UTC (permalink / raw)
To: u-boot
- update to new relocation code
- switch to boards.cfg
- get rid of LEGACY (still a little hack in .h to compile)
- add nand boot configuration
- boot tested for the following configurations :
9260 (64MB RAM & nor boot)
9260_nand (64MB RAM & nand boot)
9G20_128M (128MB RAM & nor boot)
9G20_nand_128M (128MB RAM & nand boot)
(nor boot is using lowlevel init)
Signed-off-by: Eric B?nard <eric@eukrea.com>
---
board/eukrea/cpu9260/config.mk | 1 -
board/eukrea/cpu9260/cpu9260.c | 161 +++++++++++--------------
board/eukrea/cpu9260/led.c | 36 +++---
boards.cfg | 8 ++
include/configs/cpu9260.h | 265 +++++++++++++++++++++++++---------------
5 files changed, 263 insertions(+), 208 deletions(-)
delete mode 100644 board/eukrea/cpu9260/config.mk
diff --git a/board/eukrea/cpu9260/config.mk b/board/eukrea/cpu9260/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/eukrea/cpu9260/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
index 61b6c33..9ec48a0 100644
--- a/board/eukrea/cpu9260/cpu9260.c
+++ b/board/eukrea/cpu9260/cpu9260.c
@@ -29,12 +29,13 @@
#include <common.h>
#include <asm/sizes.h>
#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9_matrix.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
-#include <asm/arch/gpio.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/clk.h>
#include <asm/arch/io.h>
#include <asm/arch/hardware.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
@@ -53,116 +54,103 @@ DECLARE_GLOBAL_DATA_PTR;
static void cpu9260_nand_hw_init(void)
{
unsigned long csa;
+ at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE;
+ at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
/* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A;
+ writel(csa, &matrix->csa);
/* Configure SMC CS3 for NAND/SmartMedia */
#if defined(CONFIG_CPU9G20)
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(4) |
- AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(4));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_DBW_8 |
- AT91_SMC_TDF_(3));
+ writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) |
+ AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
#elif defined(CONFIG_CPU9260)
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_DBW_8 |
- AT91_SMC_TDF_(2));
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(2),
+ &smc->cs[3].mode);
#endif
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+ writel(1 << AT91SAM9260_ID_PIOC, &pmc->pcer);
/* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
/* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
#ifdef CONFIG_MACB
static void cpu9260_macb_hw_init(void)
{
- unsigned long rstc;
+ unsigned long rstcmr;
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE;
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
-
- /*
- * Disable pull-up on:
- * RXDV (PA17) => PHY normal mode (not Test mode)
- * ERX0 (PA14) => PHY ADDR0
- * ERX1 (PA15) => PHY ADDR1
- * ERX2 (PA25) => PHY ADDR2
- * ERX3 (PA26) => PHY ADDR3
- * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
- writel(pin_to_mask(AT91_PIN_PA14) |
- pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA17) |
- pin_to_mask(AT91_PIN_PA25) |
- pin_to_mask(AT91_PIN_PA26) |
- pin_to_mask(AT91_PIN_PA28),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
-
- rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
+ writel(1 << AT91SAM9260_ID_EMAC, &pmc->pcer);
+
+ at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
+
+ rstcmr = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
/* Need to reset PHY -> 500ms reset */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0D << 8)) |
- AT91_RSTC_URSTEN);
+ writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0xD) |
+ AT91_RSTC_MR_URSTEN, &rstc->mr);
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+ writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
/* Wait for end hardware reset */
- while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL))
+ while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
;
/* Restore NRST value */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (rstc) |
- AT91_RSTC_URSTEN);
-
- /* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PA14) |
- pin_to_mask(AT91_PIN_PA15) |
- pin_to_mask(AT91_PIN_PA17) |
- pin_to_mask(AT91_PIN_PA25) |
- pin_to_mask(AT91_PIN_PA26) |
- pin_to_mask(AT91_PIN_PA28),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+ writel(AT91_RSTC_KEY | rstcmr | AT91_RSTC_MR_URSTEN, &rstc->mr);
at91_macb_hw_init();
}
#endif
-int board_init(void)
+int board_early_init_f(void)
{
- /* Enable Ctrlc */
- console_init_f();
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
+ writel((1 << AT91SAM9260_ID_PIOA) |
+ (1 << AT91SAM9260_ID_PIOC) |
+ (1 << AT91SAM9260_ID_PIOB),
+ &pmc->pcer);
+
+ at91_serial_hw_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
/* arch number of the board */
#if defined(CONFIG_CPU9G20)
gd->bd->bi_arch_number = MACH_TYPE_CPUAT9G20;
@@ -171,9 +159,8 @@ int board_init(void)
#endif
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_serial_hw_init();
#ifdef CONFIG_CMD_NAND
cpu9260_nand_hw_init();
#endif
@@ -188,26 +175,16 @@ int board_init(void)
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- if (get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) !=
- PHYS_SDRAM_SIZE)
- return -1;
-
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
return 0;
}
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
+ rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0);
#endif
return rc;
}
diff --git a/board/eukrea/cpu9260/led.c b/board/eukrea/cpu9260/led.c
index e73543b..d0906bc 100644
--- a/board/eukrea/cpu9260/led.c
+++ b/board/eukrea/cpu9260/led.c
@@ -35,65 +35,67 @@ static unsigned int saved_state[4] = {STATUS_LED_OFF, STATUS_LED_OFF,
void coloured_LED_init(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+ writel(1 << AT91SAM9260_ID_PIOC, &pmc->pcer);
- at91_set_gpio_output(CONFIG_RED_LED, 1);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
- at91_set_gpio_output(CONFIG_BLUE_LED, 1);
+ at91_set_pio_output(CONFIG_RED_LED, 1);
+ at91_set_pio_output(CONFIG_GREEN_LED, 1);
+ at91_set_pio_output(CONFIG_YELLOW_LED, 1);
+ at91_set_pio_output(CONFIG_BLUE_LED, 1);
- at91_set_gpio_value(CONFIG_RED_LED, 1);
- at91_set_gpio_value(CONFIG_GREEN_LED, 1);
- at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
- at91_set_gpio_value(CONFIG_BLUE_LED, 1);
+ at91_set_pio_value(CONFIG_RED_LED, 1);
+ at91_set_pio_value(CONFIG_GREEN_LED, 1);
+ at91_set_pio_value(CONFIG_YELLOW_LED, 1);
+ at91_set_pio_value(CONFIG_BLUE_LED, 1);
}
void red_LED_off(void)
{
- at91_set_gpio_value(CONFIG_RED_LED, 1);
+ at91_set_pio_value(CONFIG_RED_LED, 1);
saved_state[STATUS_LED_RED] = STATUS_LED_OFF;
}
void green_LED_off(void)
{
- at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+ at91_set_pio_value(CONFIG_GREEN_LED, 1);
saved_state[STATUS_LED_GREEN] = STATUS_LED_OFF;
}
void yellow_LED_off(void)
{
- at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
+ at91_set_pio_value(CONFIG_YELLOW_LED, 1);
saved_state[STATUS_LED_YELLOW] = STATUS_LED_OFF;
}
void blue_LED_off(void)
{
- at91_set_gpio_value(CONFIG_BLUE_LED, 1);
+ at91_set_pio_value(CONFIG_BLUE_LED, 1);
saved_state[STATUS_LED_BLUE] = STATUS_LED_OFF;
}
void red_LED_on(void)
{
- at91_set_gpio_value(CONFIG_RED_LED, 0);
+ at91_set_pio_value(CONFIG_RED_LED, 0);
saved_state[STATUS_LED_RED] = STATUS_LED_ON;
}
void green_LED_on(void)
{
- at91_set_gpio_value(CONFIG_GREEN_LED, 0);
+ at91_set_pio_value(CONFIG_GREEN_LED, 0);
saved_state[STATUS_LED_GREEN] = STATUS_LED_ON;
}
void yellow_LED_on(void)
{
- at91_set_gpio_value(CONFIG_YELLOW_LED, 0);
+ at91_set_pio_value(CONFIG_YELLOW_LED, 0);
saved_state[STATUS_LED_YELLOW] = STATUS_LED_ON;
}
void blue_LED_on(void)
{
- at91_set_gpio_value(CONFIG_BLUE_LED, 0);
+ at91_set_pio_value(CONFIG_BLUE_LED, 0);
saved_state[STATUS_LED_BLUE] = STATUS_LED_ON;
}
diff --git a/boards.cfg b/boards.cfg
index 105c748..2f0d1df 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -72,6 +72,14 @@ omap1510inn arm arm925t - ti
aspenite arm arm926ejs - Marvell armada100
afeb9260 arm arm926ejs - - at91
at91cap9adk arm arm926ejs - atmel at91
+cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260
+cpu9260_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,NANDBOOT
+cpu9260_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M
+cpu9260_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M,NANDBOOT
+cpu9G20 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20
+cpu9G20_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,NANDBOOT
+cpu9G20_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M
+cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M,NANDBOOT
top9000eval_xe arm arm926ejs top9000 emk at91 top9000:EVAL9000
top9000su_xe arm arm926ejs top9000 emk at91 top9000:SU9000
meesc arm arm926ejs - esd at91
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index d239423..a8ada2d 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -31,35 +31,39 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_AT91_LEGACY
-
-#define CONFIG_DISPLAY_CPUINFO 1
+/* to be removed once maemory-map.h is fixed */
+#define AT91_BASE_SYS 0xffffe800
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
#define CONFIG_SYS_HZ 1000
-#define CONFIG_ARM926EJS 1
-
-#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9260)
-#define CONFIG_CPU9260 1
-#elif defined(CONFIG_CPU9G20_128M) || defined(CONFIG_CPU9G20)
-#define CONFIG_CPU9G20 1
-#endif
+#define CONFIG_ARM926EJS
#if defined(CONFIG_CPU9G20)
-#define CONFIG_AT91SAM9G20 1
+#define CONFIG_AT91SAM9G20
#elif defined(CONFIG_CPU9260)
-#define CONFIG_AT91SAM9260 1
+#define CONFIG_AT91SAM9260
#else
#error "Unknown board"
#endif
+#define CONFIG_AT91FAMILY
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#if defined(CONFIG_NANDBOOT)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x23f00000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+#endif
/* clocks */
#if defined(CONFIG_CPU9G20)
@@ -113,8 +117,8 @@
/* EBI_CSA, 3.3V, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
#define CONFIG_SYS_MATRIX_EBICSA_VAL \
- (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC |\
- AT91_MATRIX_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_VDDIOMSEL)
+ (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A | \
+ AT91_MATRIX_CSA_EBI_CS3A | AT91_MATRIX_CSA_VDDIOMSEL_3_3V)
/* SDRAM */
/* SDRAMC_MR Mode register */
@@ -199,67 +203,68 @@
/* setup SMC0, CS0 (NOR Flash) - 16-bit */
#if defined(CONFIG_CPU9G20)
#define CONFIG_SYS_SMC0_SETUP0_VAL \
- (AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | \
- AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0))
+ (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \
+ AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0))
#define CONFIG_SYS_SMC0_PULSE0_VAL \
- (AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(8) | \
- AT91_SMC_NRDPULSE_(14) | AT91_SMC_NCS_RDPULSE_(14))
+ (AT91_SMC_PULSE_NWE(8) | AT91_SMC_PULSE_NCS_WR(8) | \
+ AT91_SMC_PULSE_NRD(14) | AT91_SMC_PULSE_NCS_RD(14))
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
- (AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(14))
+ (AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(14))
#define CONFIG_SYS_SMC0_MODE0_VAL \
- (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \
- AT91_SMC_DBW_16 | \
- AT91_SMC_TDFMODE | \
- AT91_SMC_TDF_(3))
+ (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
+ AT91_SMC_MODE_DBW_16 | \
+ AT91_SMC_MODE_TDF | \
+ AT91_SMC_MODE_TDF_CYCLE(3))
#elif defined(CONFIG_CPU9260)
#define CONFIG_SYS_SMC0_SETUP0_VAL \
- (AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | \
- AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0))
+ (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \
+ AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0))
#define CONFIG_SYS_SMC0_PULSE0_VAL \
- (AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(6) | \
- AT91_SMC_NRDPULSE_(10) | AT91_SMC_NCS_RDPULSE_(10))
+ (AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(6) | \
+ AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(10))
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
- (AT91_SMC_NWECYCLE_(6) | AT91_SMC_NRDCYCLE_(10))
+ (AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(10))
#define CONFIG_SYS_SMC0_MODE0_VAL \
- (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \
- AT91_SMC_DBW_16 | \
- AT91_SMC_TDFMODE | \
- AT91_SMC_TDF_(2))
+ (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
+ AT91_SMC_MODE_DBW_16 | \
+ AT91_SMC_MODE_TDF | \
+ AT91_SMC_MODE_TDF_CYCLE(2))
#endif
/* user reset enable */
#define CONFIG_SYS_RSTC_RMR_VAL \
(AT91_RSTC_KEY | \
- AT91_RSTC_PROCRST | \
- AT91_RSTC_RSTTYP_WAKEUP | \
- AT91_RSTC_RSTTYP_WATCHDOG)
+ AT91_RSTC_CR_PROCRST | \
+ AT91_RSTC_MR_ERSTL(1) | \
+ AT91_RSTC_MR_ERSTL(2))
/* Disable Watchdog */
#define CONFIG_SYS_WDTC_WDMR_VAL \
- (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \
- AT91_WDT_WDV | \
- AT91_WDT_WDDIS | \
- AT91_WDT_WDD)
+ (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
+ AT91_WDT_MR_WDV(0xfff) | \
+ AT91_WDT_MR_WDDIS | \
+ AT91_WDT_MR_WDD(0xfff))
/*
* Hardware drivers
*/
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
+#define CONFIG_AT91SAM9_WATCHDOG
+#define CONFIG_AT91_GPIO
+#define CONFIG_ATMEL_USART
#undef CONFIG_USART0
#undef CONFIG_USART1
#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+#define CONFIG_USART3
#define CONFIG_BOOTDELAY 3
/*
* BOOTP options
*/
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
@@ -271,37 +276,41 @@
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
-#define CONFIG_CMD_FAT 1
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MII
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9G20_128M)
-#define PHYS_SDRAM_SIZE 0x08000000 /* 128 MB */
+#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_128MB
#else
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 MB */
+#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024)
#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_64MB
#endif
/* NAND flash */
-#define CONFIG_NAND_ATMEL 1
+#define CONFIG_NAND_ATMEL
#define NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTC, 13
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
/* NOR flash */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
+#if defined(CONFIG_NANDBOOT)
+#define CONFIG_SYS_NO_FLASH
+#else
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
#define PHYS_FLASH_1 0x10000000
#define PHYS_FLASH_2 0x12000000
#define CONFIG_SYS_FLASH_BANKS_LIST \
@@ -310,23 +319,23 @@
#define CONFIG_SYS_MAX_FLASH_SECT (255+4)
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-#define CONFIG_SYS_FLASH_PROTECTION 1
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
+#endif
/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_RESET_PHY_R 1
-#define CONFIG_NET_MULTI 1
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_MACB_SEARCH_PHY 1
+#define CONFIG_MACB_SEARCH_PHY
/* LEDS */
/* Status LED */
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED 1
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_RED 0
#define STATUS_LED_GREEN 1
#define STATUS_LED_YELLOW 2
@@ -350,39 +359,56 @@
/* Optional value */
#define STATUS_LED_BOOT STATUS_LED_BIT
-#define CONFIG_RED_LED AT91_PIN_PC11
-#define CONFIG_GREEN_LED AT91_PIN_PC12
-#define CONFIG_YELLOW_LED AT91_PIN_PC7
-#define CONFIG_BLUE_LED AT91_PIN_PC9
+#define CONFIG_RED_LED AT91_PIO_PORTC, 11
+#define CONFIG_GREEN_LED AT91_PIO_PORTC, 12
+#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 7
+#define CONFIG_BLUE_LED AT91_PIO_PORTC, 9
/* USB */
-#define CONFIG_USB_ATMEL 1
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
+#if defined(CONFIG_CPU9G20)
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20"
+#elif defined(CONFIG_CPU9260)
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
+#endif
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
+#define CONFIG_USB_STORAGE
#define CONFIG_SYS_LOAD_ADDR 0x21000000
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x21e00000
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END \
+ (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024)
+#if defined(CONFIG_NANDBOOT)
+#define CONFIG_SYS_USE_NANDFLASH
+#undef CONFIG_SYS_USE_FLASH
+#else
+#define CONFIG_SYS_USE_FLASH
#undef CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SYS_USE_FLASH 1
+#endif
+
+#if defined(CONFIG_CPU9G20)
+#define CONFIG_SYS_BASEDIR "cpu9G20"
+#elif defined(CONFIG_CPU9260)
+#define CONFIG_SYS_BASEDIR "cpu9260"
+#endif
#if defined(CONFIG_SYS_USE_FLASH)
-#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_OFFSET 0x40000
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_ENV_OVERWRITE
#define CONFIG_BOOTCOMMAND "run flashboot"
-#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand"
+#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand"
#define MTDPARTS_DEFAULT \
"mtdparts=physmap-flash.0:" \
"256k(u-boot)ro," \
@@ -393,18 +419,12 @@
#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 "
-#if defined(CONFIG_CPU9G20)
-#define CONFIG_SYS_BASEDIR "cpu9G20"
-#elif defined(CONFIG_CPU9260)
-#define CONFIG_SYS_BASEDIR "cpu9260"
-#endif
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"partition=nand0,0\0" \
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
- "ramboot=tftpboot 0x22000000 cpu9260/uImage;" \
+ "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \
"run ramargs;bootm 22000000\0" \
"flashboot=run ramargs;bootm 0x10060000\0" \
"basedir=" CONFIG_SYS_BASEDIR "\0" \
@@ -421,6 +441,52 @@
"0x10220000 0x13ffffff;cp.b 0x24000000 " \
"0x10220000 $(filesize)\0" \
""
+#elif defined(CONFIG_NANDBOOT)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x60000
+#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BOOTCOMMAND "run flashboot"
+
+#define MTDIDS_DEFAULT "nand0=atmel_nand"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=atmel_nand:" \
+ "128k(bootstrap)ro," \
+ "256k(u-boot)ro," \
+ "128k(u-boot-env)ro," \
+ "128k(u-boot-env2)ro," \
+ "2M(kernel)," \
+ "-(rootfs)"
+
+#define CONFIG_BOOTARGS "root=ubi0:eukrea-cpu9260-rootfs " \
+ "ubi.mtd=5 rootfstype=ubifs at91sam9_wdt.heartbeat=60"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "partition=nand0,5\0" \
+ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
+ "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \
+ "run ramargs;bootm 22000000\0" \
+ "flashboot=run ramargs; nand read 0x22000000 0xA0000 " \
+ "0x200000; bootm 0x22000000\0" \
+ "basedir=" CONFIG_SYS_BASEDIR "\0" \
+ "u-boot=u-boot-eukrea-cpu9260.bin\0" \
+ "kernel=uImage-eukrea-cpu9260.bin\0" \
+ "rootfs=image-eukrea-cpu9260.ubi\0" \
+ "updtub=tftp ${loadaddr} $(basedir)/${u-boot}; " \
+ "nand erase 20000 40000; " \
+ "nand write ${loadaddr} 20000 40000\0" \
+ "updtui=tftp ${loadaddr} $(basedir)/${kernel}; " \
+ "nand erase a0000 200000; " \
+ "nand write ${loadaddr} a0000 200000\0" \
+ "updtrfs=tftp ${loadaddr} $(basedir)/${rootfs}; " \
+ "nand erase 2a0000 fd60000; " \
+ "nand write ${loadaddr} 2a0000 ${filesize}\0"
#endif
#define CONFIG_BAUDRATE 115200
@@ -435,10 +501,10 @@
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_SILENT_CONSOLE 1
-#define CONFIG_NETCONSOLE 1
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SILENT_CONSOLE
+#define CONFIG_NETCONSOLE
/*
* Size of malloc() pool
@@ -446,6 +512,9 @@
#define CONFIG_SYS_MALLOC_LEN \
ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \
+ GENERATED_GBL_DATA_SIZE)
+
#define CONFIG_STACKSIZE (32 * 1024)
#if defined(CONFIG_USE_IRQ)
--
1.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH 3/3] cpuat91: fix board support
2011-04-03 16:35 [U-Boot] [PATCH 1/3] mp2usb: remove board support Eric Bénard
2011-04-03 16:35 ` [U-Boot] [PATCH 2/3] cpu9260: update " Eric Bénard
@ 2011-04-03 16:35 ` Eric Bénard
2011-04-15 13:49 ` Eric Bénard
2011-04-23 10:08 ` Albert ARIBAUD
2011-04-27 20:00 ` [U-Boot] [PATCH 1/3] mp2usb: remove " Wolfgang Denk
2 siblings, 2 replies; 13+ messages in thread
From: Eric Bénard @ 2011-04-03 16:35 UTC (permalink / raw)
To: u-boot
- fix board support following relocation changes
- switch to boards.cfg
- disable i2c to keep size under 128kiB (1 sector)
Signed-off-by: Eric B?nard <eric@eukrea.com>
---
Makefile | 10 ---
board/eukrea/cpuat91/Makefile | 4 +-
board/eukrea/cpuat91/config.mk | 1 -
board/eukrea/cpuat91/cpuat91.c | 11 ++--
boards.cfg | 2 +
include/configs/cpuat91.h | 141 ++++++++++++++++++++++------------------
6 files changed, 87 insertions(+), 82 deletions(-)
delete mode 100644 board/eukrea/cpuat91/config.mk
diff --git a/Makefile b/Makefile
index 10a856a..aeb6e7c 100644
--- a/Makefile
+++ b/Makefile
@@ -749,16 +749,6 @@ M5485HFE_config : unconfig
#========================================================================
#########################################################################
-## Atmel AT91RM9200 Systems
-#########################################################################
-
-CPUAT91_RAM_config \
-CPUAT91_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91
-
-#########################################################################
## ARM926EJ-S Systems
#########################################################################
diff --git a/board/eukrea/cpuat91/Makefile b/board/eukrea/cpuat91/Makefile
index 15da3d8..1d62b13 100644
--- a/board/eukrea/cpuat91/Makefile
+++ b/board/eukrea/cpuat91/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := cpuat91.o
+COBJS := $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
@@ -38,7 +38,7 @@ clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
- rm -f $(LIB) core *.bak .depend
+ rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
diff --git a/board/eukrea/cpuat91/config.mk b/board/eukrea/cpuat91/config.mk
deleted file mode 100644
index 463f46b..0000000
--- a/board/eukrea/cpuat91/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21F00000
diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c
index cd4d42c..4c4dad6 100644
--- a/board/eukrea/cpuat91/cpuat91.c
+++ b/board/eukrea/cpuat91/cpuat91.c
@@ -47,24 +47,23 @@ int board_init(void)
/* arch number of CPUAT91-Board */
gd->bd->bi_arch_number = MACH_TYPE_CPUAT91;
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
return 0;
}
#ifdef CONFIG_DRIVER_AT91EMAC
int board_eth_init(bd_t *bis)
{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
+ return at91emac_register(bis, (u32) AT91_EMAC_BASE);
}
#endif
diff --git a/boards.cfg b/boards.cfg
index 2f0d1df..64b5f95 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -52,6 +52,8 @@ a320evb arm arm920t - faraday
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
eb_cpux9k2 arm arm920t - BuS at91
+cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
+cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
cmc_pu2 arm arm920t - - at91rm9200
csb637 arm arm920t - - at91rm9200
kb9202 arm arm920t - - at91rm9200
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index f31081d..cfaef15 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -26,30 +26,36 @@
#ifndef _CONFIG_CPUAT91_H
#define _CONFIG_CPUAT91_H
-#ifdef CONFIG_CPUAT91_RAM
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
+#include <asm/sizes.h>
+
+#ifdef CONFIG_RAMBOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x21F00000
#else
#define CONFIG_BOOTDELAY 1
+#define CONFIG_SYS_TEXT_BASE 0
#endif
-#define AT91C_MAIN_CLOCK 179712000
-#define AT91C_MASTER_CLOCK 59904000
-
-#define AT91_SLOW_CLOCK 32768
+#define AT91C_XTAL_CLOCK 18432000
+#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39)
+#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)
+#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
+#define CONFIG_SYS_HZ 1000
-#define CONFIG_ARM920T 1
-#define CONFIG_AT91RM9200 1
-#define CONFIG_CPUAT91 1
+#define CONFIG_ARM920T
+#define CONFIG_AT91RM9200
+#define CONFIG_CPUAT91
+#define CONFIG_AT91FAMILY
#undef CONFIG_USE_IRQ
-#define USE_920T_MMU 1
+#define USE_920T_MMU
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR
/* flash */
#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
#define CONFIG_SYS_MC_PUP_VAL 0x00000000
@@ -81,17 +87,15 @@
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART 1
-#define CONFIG_DBGU 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
+#define CONFIG_AT91RM9200_USART
+#define CONFIG_DBGU
#undef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C 1
+#undef CONFIG_SOFT_I2C
#define AT91_PIN_SDA (1<<25)
#define AT91_PIN_SCL (1<<26)
-#define CONFIG_SYS_I2C_INIT_BOARD 1
+#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_SYS_I2C_SLAVE 0
@@ -117,70 +121,77 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_MII 1
-#define CONFIG_CMD_CACHE 1
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_CACHE
#undef CONFIG_CMD_USB
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM 1
-#define CONFIG_CMD_I2C 1
+#ifdef CONFIG_SOFT_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#endif
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x02000000
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024)
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END \
- (CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024)
+ (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024)
-#define CONFIG_NET_MULTI 1
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#define CONFIG_RMII 1
-#define CONFIG_MII 1
+#define CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC
+#define CONFIG_SYS_RX_ETH_BUFFER 16
+#define CONFIG_RMII
+#define CONFIG_MII
#define CONFIG_DRIVER_AT91EMAC_PHYADDR 1
#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_KS8721_PHY 1
+#define CONFIG_KS8721_PHY
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_PROTECTION 1
+#define CONFIG_SYS_FLASH_PROTECTION
#define PHYS_FLASH_1 0x10000000
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_MAX_FLASH_SECT 128
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
+#define PHYS_FLASH_SIZE (16 * 1024 * 1024)
+#define CONFIG_SYS_FLASH_BANKS_LIST \
+ { PHYS_FLASH_1 }
#if defined(CONFIG_CMD_USB)
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_AT91C_PQFP_UHPBU 1
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_AT91C_PQFP_UHPBU
#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
#endif
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000)
-#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 128 * 1024)
+#define CONFIG_ENV_SIZE (128 * 1024)
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_SYS_LOAD_ADDR 0x21000000
@@ -192,29 +203,33 @@
#define CONFIG_SYS_MAXARGS 32
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
+#define CONFIG_SYS_MALLOC_LEN \
+ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 4 * 1024)
+
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \
+ GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
#define CONFIG_STACKSIZE (32 * 1024)
+#define CONFIG_STACKSIZE_IRQ (4 * 1024)
+#define CONFIG_STACKSIZE_FIQ (4 * 1024)
+
#if defined(CONFIG_USE_IRQ)
#error CONFIG_USE_IRQ not supported
#endif
-#define CONFIG_DEVICE_NULLDEV 1
-#define CONFIG_SILENT_CONSOLE 1
+#define CONFIG_DEVICE_NULLDEV
+#define CONFIG_SILENT_CONSOLE
-#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_PROMPT \
"Press SPACE to abort autoboot\n"
#define CONFIG_AUTOBOOT_STOP_STR " "
#define CONFIG_AUTOBOOT_DELAY_STR "d"
-#define CONFIG_VERSION_VARIABLE 1
+#define CONFIG_VERSION_VARIABLE
#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
#define MTDPARTS_DEFAULT \
--
1.7.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH 3/3] cpuat91: fix board support
2011-04-03 16:35 ` [U-Boot] [PATCH 3/3] cpuat91: fix " Eric Bénard
@ 2011-04-15 13:49 ` Eric Bénard
2011-04-16 6:57 ` Albert ARIBAUD
2011-04-23 10:08 ` Albert ARIBAUD
1 sibling, 1 reply; 13+ messages in thread
From: Eric Bénard @ 2011-04-15 13:49 UTC (permalink / raw)
To: u-boot
Hi,
On 03/04/2011 18:35, Eric B?nard wrote:
> - fix board support following relocation changes
> - switch to boards.cfg
> - disable i2c to keep size under 128kiB (1 sector)
>
> Signed-off-by: Eric B?nard<eric@eukrea.com>
> ---
any news concerning this patch ?
http://patchwork.ozlabs.org/patch/89536/
Thanks,
Eric
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH 2/3] cpu9260: update board support
2011-04-03 16:35 ` [U-Boot] [PATCH 2/3] cpu9260: update " Eric Bénard
@ 2011-04-15 13:49 ` Eric Bénard
2011-04-16 7:26 ` Albert ARIBAUD
1 sibling, 0 replies; 13+ messages in thread
From: Eric Bénard @ 2011-04-15 13:49 UTC (permalink / raw)
To: u-boot
Hi,
On 03/04/2011 18:35, Eric B?nard wrote:
> - update to new relocation code
> - switch to boards.cfg
> - get rid of LEGACY (still a little hack in .h to compile)
> - add nand boot configuration
> - boot tested for the following configurations :
> 9260 (64MB RAM& nor boot)
> 9260_nand (64MB RAM& nand boot)
> 9G20_128M (128MB RAM& nor boot)
> 9G20_nand_128M (128MB RAM& nand boot)
> (nor boot is using lowlevel init)
>
> Signed-off-by: Eric B?nard<eric@eukrea.com>
> ---
any news concerning this patch ?
http://patchwork.ozlabs.org/patch/89540/
Thanks,
Eric
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH 3/3] cpuat91: fix board support
2011-04-15 13:49 ` Eric Bénard
@ 2011-04-16 6:57 ` Albert ARIBAUD
0 siblings, 0 replies; 13+ messages in thread
From: Albert ARIBAUD @ 2011-04-16 6:57 UTC (permalink / raw)
To: u-boot
Le 15/04/2011 15:49, Eric B?nard a ?crit :
> To: albert at aribaud.net
Please do not use this address of mine for U-Boot related stuff; use
albert.u.boot at aribaud.net (Cc:ed).
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH 2/3] cpu9260: update board support
2011-04-03 16:35 ` [U-Boot] [PATCH 2/3] cpu9260: update " Eric Bénard
2011-04-15 13:49 ` Eric Bénard
@ 2011-04-16 7:26 ` Albert ARIBAUD
2011-04-23 7:12 ` Albert ARIBAUD
1 sibling, 1 reply; 13+ messages in thread
From: Albert ARIBAUD @ 2011-04-16 7:26 UTC (permalink / raw)
To: u-boot
Le 03/04/2011 18:35, Eric B?nard a ?crit :
> diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
> index 61b6c33..9ec48a0 100644
> --- a/board/eukrea/cpu9260/cpu9260.c
> +++ b/board/eukrea/cpu9260/cpu9260.c
> @@ -188,26 +175,16 @@ int board_init(void)
>
> int dram_init(void)
> {
> - gd->bd->bi_dram[0].start = PHYS_SDRAM;
> - if (get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) !=
> - PHYS_SDRAM_SIZE)
> - return -1;
> -
> - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
> + gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE,
> + CONFIG_SYS_SDRAM_SIZE);
Checkpatch warns about the volatile here.
I know the get_ram_size() prototype calls for the volatile attribute,
but what is the rationale here for this? get_ram_size() just needs the
RAM base address *value*; if it requires volatile accesses to it, it can
arrange for these inside its definition. Besides, throughout the code
base there are 19 instances of get_ram_size() callw where the argument
is cast to volatile, against 130 where it is not.
Wolfgang et al.: how about removing the 'volatile' qualifier from the
get_ram_size() prototype?
Eric: if your patch does not cause a warning without the volatile in the
call, can you update and repost it as V2?
> diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
> index d239423..a8ada2d 100644
> --- a/include/configs/cpu9260.h
> +++ b/include/configs/cpu9260.h
> -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
> -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
> +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTC, 13
> +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
> -#define CONFIG_RED_LED AT91_PIN_PC11
> -#define CONFIG_GREEN_LED AT91_PIN_PC12
> -#define CONFIG_YELLOW_LED AT91_PIN_PC7
> -#define CONFIG_BLUE_LED AT91_PIN_PC9
> +#define CONFIG_RED_LED AT91_PIO_PORTC, 11
> +#define CONFIG_GREEN_LED AT91_PIO_PORTC, 12
> +#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 7
> +#define CONFIG_BLUE_LED AT91_PIO_PORTC, 9
Checkpatch considers these errors. This is again a case where we'd want
it to ignore it... or reconsider this type of macro, which intends to
expand to several function arguments.
For now I'll ignore these 6 checkpatch errors.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH 2/3] cpu9260: update board support
2011-04-16 7:26 ` Albert ARIBAUD
@ 2011-04-23 7:12 ` Albert ARIBAUD
0 siblings, 0 replies; 13+ messages in thread
From: Albert ARIBAUD @ 2011-04-23 7:12 UTC (permalink / raw)
To: u-boot
Le 16/04/2011 09:26, Albert ARIBAUD a ?crit :
> Le 03/04/2011 18:35, Eric B?nard a ?crit :
>
>> diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
>> index 61b6c33..9ec48a0 100644
>> --- a/board/eukrea/cpu9260/cpu9260.c
>> +++ b/board/eukrea/cpu9260/cpu9260.c
>
>> @@ -188,26 +175,16 @@ int board_init(void)
>>
>> int dram_init(void)
>> {
>> - gd->bd->bi_dram[0].start = PHYS_SDRAM;
>> - if (get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) !=
>> - PHYS_SDRAM_SIZE)
>> - return -1;
>> -
>> - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
>> + gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE,
>> + CONFIG_SYS_SDRAM_SIZE);
>
> Checkpatch warns about the volatile here.
>
> I know the get_ram_size() prototype calls for the volatile attribute,
> but what is the rationale here for this? get_ram_size() just needs the
> RAM base address *value*; if it requires volatile accesses to it, it can
> arrange for these inside its definition. Besides, throughout the code
> base there are 19 instances of get_ram_size() callw where the argument
> is cast to volatile, against 130 where it is not.
>
> Wolfgang et al.: how about removing the 'volatile' qualifier from the
> get_ram_size() prototype?
>
> Eric: if your patch does not cause a warning without the volatile in the
> call, can you update and repost it as V2?
>
>> diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
>> index d239423..a8ada2d 100644
>> --- a/include/configs/cpu9260.h
>> +++ b/include/configs/cpu9260.h
>
>> -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
>> -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
>> +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTC, 13
>> +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
>
>> -#define CONFIG_RED_LED AT91_PIN_PC11
>> -#define CONFIG_GREEN_LED AT91_PIN_PC12
>> -#define CONFIG_YELLOW_LED AT91_PIN_PC7
>> -#define CONFIG_BLUE_LED AT91_PIN_PC9
>> +#define CONFIG_RED_LED AT91_PIO_PORTC, 11
>> +#define CONFIG_GREEN_LED AT91_PIO_PORTC, 12
>> +#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 7
>> +#define CONFIG_BLUE_LED AT91_PIO_PORTC, 9
>
> Checkpatch considers these errors. This is again a case where we'd want
> it to ignore it... or reconsider this type of macro, which intends to
> expand to several function arguments.
>
> For now I'll ignore these 6 checkpatch errors.
>
> Amicalement,
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH 3/3] cpuat91: fix board support
2011-04-03 16:35 ` [U-Boot] [PATCH 3/3] cpuat91: fix " Eric Bénard
2011-04-15 13:49 ` Eric Bénard
@ 2011-04-23 10:08 ` Albert ARIBAUD
1 sibling, 0 replies; 13+ messages in thread
From: Albert ARIBAUD @ 2011-04-23 10:08 UTC (permalink / raw)
To: u-boot
Le 03/04/2011 18:35, Eric B?nard a ?crit :
> - fix board support following relocation changes
> - switch to boards.cfg
> - disable i2c to keep size under 128kiB (1 sector)
>
> Signed-off-by: Eric B?nard<eric@eukrea.com>
> ---
Reinhard: this was delegated to you in patchwork, but since this is only
board support, not arch, and I have applied other at91-related patches
in the series, I took the liberty of assigning it to myself.
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH 1/3] mp2usb: remove board support
2011-04-03 16:35 [U-Boot] [PATCH 1/3] mp2usb: remove board support Eric Bénard
2011-04-03 16:35 ` [U-Boot] [PATCH 2/3] cpu9260: update " Eric Bénard
2011-04-03 16:35 ` [U-Boot] [PATCH 3/3] cpuat91: fix " Eric Bénard
@ 2011-04-27 20:00 ` Wolfgang Denk
2011-04-27 20:15 ` Eric Bénard
2011-04-27 20:18 ` [U-Boot] [PATCH] mp2usb: finish the removal Eric Bénard
2 siblings, 2 replies; 13+ messages in thread
From: Wolfgang Denk @ 2011-04-27 20:00 UTC (permalink / raw)
To: u-boot
Dear Eric,
In message <1301848555-14404-1-git-send-email-eric@eukrea.com> you wrote:
> this board was cancelled long time ago so remove it as it won't
> be maintained anymore
>
> Signed-off-by: Eric B??nard <eric@eukrea.com>
> ---
> board/mp2usb/Makefile | 50 -----
> board/mp2usb/config.mk | 3 -
> board/mp2usb/flash.c | 552 ----------------------------------------------
> board/mp2usb/mp2usb.c | 98 --------
> boards.cfg | 1 -
> include/configs/mp2usb.h | 242 --------------------
> 6 files changed, 0 insertions(+), 946 deletions(-)
> delete mode 100644 board/mp2usb/Makefile
> delete mode 100644 board/mp2usb/config.mk
> delete mode 100644 board/mp2usb/flash.c
> delete mode 100644 board/mp2usb/mp2usb.c
> delete mode 100644 include/configs/mp2usb.h
This does not apply cleanly. Can you please rebase and resubmit?
Please also make an entry about the removal in doc/README.scrapyard - thanks!
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
What about WRITING it first and rationalizing it afterwords? :-)
- Larry Wall in <8162@jpl-devvax.JPL.NASA.GOV>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH 1/3] mp2usb: remove board support
2011-04-27 20:00 ` [U-Boot] [PATCH 1/3] mp2usb: remove " Wolfgang Denk
@ 2011-04-27 20:15 ` Eric Bénard
2011-04-27 20:18 ` [U-Boot] [PATCH] mp2usb: finish the removal Eric Bénard
1 sibling, 0 replies; 13+ messages in thread
From: Eric Bénard @ 2011-04-27 20:15 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
On 27/04/2011 22:00, Wolfgang Denk wrote:
> In message<1301848555-14404-1-git-send-email-eric@eukrea.com> you wrote:
>> this board was cancelled long time ago so remove it as it won't
>> be maintained anymore
>>
>> Signed-off-by: Eric B??nard<eric@eukrea.com>
>> ---
>> board/mp2usb/Makefile | 50 -----
>> board/mp2usb/config.mk | 3 -
>> board/mp2usb/flash.c | 552 ----------------------------------------------
>> board/mp2usb/mp2usb.c | 98 --------
>> boards.cfg | 1 -
>> include/configs/mp2usb.h | 242 --------------------
>> 6 files changed, 0 insertions(+), 946 deletions(-)
>> delete mode 100644 board/mp2usb/Makefile
>> delete mode 100644 board/mp2usb/config.mk
>> delete mode 100644 board/mp2usb/flash.c
>> delete mode 100644 board/mp2usb/mp2usb.c
>> delete mode 100644 include/configs/mp2usb.h
>
> This does not apply cleanly. Can you please rebase and resubmit?
>
in fact you already applied it ee986e2a7d1fd38568e2e5f83563b7bc4f607963 but
took the 1st version which didn't remove boards.cfg (I forget to add v2 btw).
> Please also make an entry about the removal in doc/README.scrapyard - thanks!
>
a patch finishing to work follows.
Thanks,
Eric
^ permalink raw reply [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] mp2usb: finish the removal
2011-04-27 20:00 ` [U-Boot] [PATCH 1/3] mp2usb: remove " Wolfgang Denk
2011-04-27 20:15 ` Eric Bénard
@ 2011-04-27 20:18 ` Eric Bénard
2011-05-12 21:29 ` Wolfgang Denk
1 sibling, 1 reply; 13+ messages in thread
From: Eric Bénard @ 2011-04-27 20:18 UTC (permalink / raw)
To: u-boot
- remove from boards.cfg
- add to doc/README.scrapyard
Signed-off-by: Eric B?nard <eric@eukrea.com>
---
boards.cfg | 1 -
doc/README.scrapyard | 1 +
2 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/boards.cfg b/boards.cfg
index d4cbb06..916414a 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -56,7 +56,6 @@ cmc_pu2 arm arm920t - -
csb637 arm arm920t - - at91rm9200
kb9202 arm arm920t - - at91rm9200
m501sk arm arm920t - - at91rm9200
-mp2usb arm arm920t - - at91rm9200
at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
mx1fs2 arm arm920t - - imx
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 8f98b60..5cdf151 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric B?nard <eric@eukrea.com>
barco powerpc MPC8245 - 2010-11-23 Marc Leeman <marc.leeman@barco.com>
ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
--
1.7.4.4
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [U-Boot] [PATCH] mp2usb: finish the removal
2011-04-27 20:18 ` [U-Boot] [PATCH] mp2usb: finish the removal Eric Bénard
@ 2011-05-12 21:29 ` Wolfgang Denk
0 siblings, 0 replies; 13+ messages in thread
From: Wolfgang Denk @ 2011-05-12 21:29 UTC (permalink / raw)
To: u-boot
Dear =?UTF-8?q?Eric=20B=C3=A9nard?=,
In message <1303935504-4918-1-git-send-email-eric@eukrea.com> you wrote:
> - remove from boards.cfg
> - add to doc/README.scrapyard
>
> Signed-off-by: Eric B??nard <eric@eukrea.com>
> ---
> boards.cfg | 1 -
> doc/README.scrapyard | 1 +
> 2 files changed, 1 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Any excuse will serve a tyrant." - Aesop
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2011-05-12 21:29 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-04-03 16:35 [U-Boot] [PATCH 1/3] mp2usb: remove board support Eric Bénard
2011-04-03 16:35 ` [U-Boot] [PATCH 2/3] cpu9260: update " Eric Bénard
2011-04-15 13:49 ` Eric Bénard
2011-04-16 7:26 ` Albert ARIBAUD
2011-04-23 7:12 ` Albert ARIBAUD
2011-04-03 16:35 ` [U-Boot] [PATCH 3/3] cpuat91: fix " Eric Bénard
2011-04-15 13:49 ` Eric Bénard
2011-04-16 6:57 ` Albert ARIBAUD
2011-04-23 10:08 ` Albert ARIBAUD
2011-04-27 20:00 ` [U-Boot] [PATCH 1/3] mp2usb: remove " Wolfgang Denk
2011-04-27 20:15 ` Eric Bénard
2011-04-27 20:18 ` [U-Boot] [PATCH] mp2usb: finish the removal Eric Bénard
2011-05-12 21:29 ` Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.