* [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm
@ 2011-05-17 18:07 Nitin A Kamble
2011-05-17 18:07 ` [PATCH 1/1] tcmode-default: switch to gcc 4.6.0 for x86, " Nitin A Kamble
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Nitin A Kamble @ 2011-05-17 18:07 UTC (permalink / raw)
To: poky, openembedded-core
From: Nitin A Kamble <nitin.a.kamble@intel.com>
gcc 4.6.0 is good enough to switch for x86, x86-64 & arm now.
I could build core-sdk images and run them through the qemu machines
when compiled with gcc 4.6.0.
mips & ppc are still not ready, mainly the kernel compilation issues
with gcc 4.6.0. These kernel issues are being worked on by Bruce.
Pull URL: git://git.pokylinux.org/poky-contrib.git
Branch: nitin/misc
Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=nitin/misc
Thanks,
Nitin A Kamble <nitin.a.kamble@intel.com>
---
Nitin A Kamble (1):
tcmode-default: switch to gcc 4.6.0 for x86, x86-64 & arm
meta/conf/distro/include/tcmode-default.inc | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
--
1.7.3.4
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH 1/1] tcmode-default: switch to gcc 4.6.0 for x86, x86-64 & arm
2011-05-17 18:07 [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm Nitin A Kamble
@ 2011-05-17 18:07 ` Nitin A Kamble
2011-05-20 15:06 ` [OE-core] " Saul Wold
2011-05-20 23:52 ` [OE-core] " Darren Hart
2 siblings, 0 replies; 8+ messages in thread
From: Nitin A Kamble @ 2011-05-17 18:07 UTC (permalink / raw)
To: poky, openembedded-core
From: Nitin A Kamble <nitin.a.kamble@intel.com>
mips & ppc are not ready yet. Waiting for kernel issues to be fixed.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
---
meta/conf/distro/include/tcmode-default.inc | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/meta/conf/distro/include/tcmode-default.inc b/meta/conf/distro/include/tcmode-default.inc
index 584da9b..ae6f272 100644
--- a/meta/conf/distro/include/tcmode-default.inc
+++ b/meta/conf/distro/include/tcmode-default.inc
@@ -16,8 +16,12 @@ PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}libc-initial = "${TCLIBC}-initial"
PREFERRED_PROVIDER_virtual/${SDK_PREFIX}libc-initial-nativesdk = "${TCLIBC}-initial-nativesdk"
PREFERRED_PROVIDER_virtual/gettext ??= "gettext"
-GCCVERSION ?= "4.5.1"
-SDKGCCVERSION ?= "4.5.1"
+GCCVERSION ?= "4.6.0"
+SDKGCCVERSION ?= "4.6.0"
+GCCVERSION_mips ?= "4.5.1"
+SDKGCCVERSION_mips ?= "4.5.1"
+GCCVERSION_ppc ?= "4.5.1"
+SDKGCCVERSION_ppc ?= "4.5.1"
BINUVERSION ?= "2.21"
GLIBCVERSION ?= "2.10.1"
EGLIBCVERSION ?= "2.12"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm
2011-05-17 18:07 [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm Nitin A Kamble
@ 2011-05-20 15:06 ` Saul Wold
2011-05-20 15:06 ` [OE-core] " Saul Wold
2011-05-20 23:52 ` [OE-core] " Darren Hart
2 siblings, 0 replies; 8+ messages in thread
From: Saul Wold @ 2011-05-20 15:06 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer; +Cc: poky
On 05/17/2011 11:07 AM, Nitin A Kamble wrote:
> From: Nitin A Kamble<nitin.a.kamble@intel.com>
>
> gcc 4.6.0 is good enough to switch for x86, x86-64& arm now.
>
> I could build core-sdk images and run them through the qemu machines
> when compiled with gcc 4.6.0.
>
> mips& ppc are still not ready, mainly the kernel compilation issues
> with gcc 4.6.0. These kernel issues are being worked on by Bruce.
>
> Pull URL: git://git.pokylinux.org/poky-contrib.git
> Branch: nitin/misc
> Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=nitin/misc
>
> Thanks,
> Nitin A Kamble<nitin.a.kamble@intel.com>
> ---
>
>
> Nitin A Kamble (1):
> tcmode-default: switch to gcc 4.6.0 for x86, x86-64& arm
>
> meta/conf/distro/include/tcmode-default.inc | 8 ++++++--
> 1 files changed, 6 insertions(+), 2 deletions(-)
>
Merged into oe-core and poky
Thanks
Sau!
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [OE-core] [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm
@ 2011-05-20 15:06 ` Saul Wold
0 siblings, 0 replies; 8+ messages in thread
From: Saul Wold @ 2011-05-20 15:06 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer; +Cc: poky
On 05/17/2011 11:07 AM, Nitin A Kamble wrote:
> From: Nitin A Kamble<nitin.a.kamble@intel.com>
>
> gcc 4.6.0 is good enough to switch for x86, x86-64& arm now.
>
> I could build core-sdk images and run them through the qemu machines
> when compiled with gcc 4.6.0.
>
> mips& ppc are still not ready, mainly the kernel compilation issues
> with gcc 4.6.0. These kernel issues are being worked on by Bruce.
>
> Pull URL: git://git.pokylinux.org/poky-contrib.git
> Branch: nitin/misc
> Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=nitin/misc
>
> Thanks,
> Nitin A Kamble<nitin.a.kamble@intel.com>
> ---
>
>
> Nitin A Kamble (1):
> tcmode-default: switch to gcc 4.6.0 for x86, x86-64& arm
>
> meta/conf/distro/include/tcmode-default.inc | 8 ++++++--
> 1 files changed, 6 insertions(+), 2 deletions(-)
>
Merged into oe-core and poky
Thanks
Sau!
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm
2011-05-17 18:07 [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm Nitin A Kamble
@ 2011-05-20 23:52 ` Darren Hart
2011-05-20 15:06 ` [OE-core] " Saul Wold
2011-05-20 23:52 ` [OE-core] " Darren Hart
2 siblings, 0 replies; 8+ messages in thread
From: Darren Hart @ 2011-05-20 23:52 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer; +Cc: poky
On 05/17/2011 11:07 AM, Nitin A Kamble wrote:
> From: Nitin A Kamble <nitin.a.kamble@intel.com>
>
> gcc 4.6.0 is good enough to switch for x86, x86-64 & arm now.
>
> I could build core-sdk images and run them through the qemu machines
> when compiled with gcc 4.6.0.
Has all of meta-intel been built using 4.6.0? If not, that would be a
good test-case for the x86* architectures. Perhaps we could get a manual
scheduler up on the autobuilder for that to make it easy to kick off?
What do you think Beth?
>
> mips & ppc are still not ready, mainly the kernel compilation issues
> with gcc 4.6.0. These kernel issues are being worked on by Bruce.
>
> Pull URL: git://git.pokylinux.org/poky-contrib.git
> Branch: nitin/misc
> Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=nitin/misc
>
> Thanks,
> Nitin A Kamble <nitin.a.kamble@intel.com>
> ---
>
>
> Nitin A Kamble (1):
> tcmode-default: switch to gcc 4.6.0 for x86, x86-64 & arm
>
> meta/conf/distro/include/tcmode-default.inc | 8 ++++++--
> 1 files changed, 6 insertions(+), 2 deletions(-)
>
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [OE-core] [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm
@ 2011-05-20 23:52 ` Darren Hart
0 siblings, 0 replies; 8+ messages in thread
From: Darren Hart @ 2011-05-20 23:52 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer; +Cc: poky
On 05/17/2011 11:07 AM, Nitin A Kamble wrote:
> From: Nitin A Kamble <nitin.a.kamble@intel.com>
>
> gcc 4.6.0 is good enough to switch for x86, x86-64 & arm now.
>
> I could build core-sdk images and run them through the qemu machines
> when compiled with gcc 4.6.0.
Has all of meta-intel been built using 4.6.0? If not, that would be a
good test-case for the x86* architectures. Perhaps we could get a manual
scheduler up on the autobuilder for that to make it easy to kick off?
What do you think Beth?
>
> mips & ppc are still not ready, mainly the kernel compilation issues
> with gcc 4.6.0. These kernel issues are being worked on by Bruce.
>
> Pull URL: git://git.pokylinux.org/poky-contrib.git
> Branch: nitin/misc
> Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=nitin/misc
>
> Thanks,
> Nitin A Kamble <nitin.a.kamble@intel.com>
> ---
>
>
> Nitin A Kamble (1):
> tcmode-default: switch to gcc 4.6.0 for x86, x86-64 & arm
>
> meta/conf/distro/include/tcmode-default.inc | 8 ++++++--
> 1 files changed, 6 insertions(+), 2 deletions(-)
>
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [poky] [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm
2011-05-20 23:52 ` [OE-core] " Darren Hart
@ 2011-05-21 0:10 ` Saul Wold
-1 siblings, 0 replies; 8+ messages in thread
From: Saul Wold @ 2011-05-21 0:10 UTC (permalink / raw)
To: Darren Hart; +Cc: poky, Patches and discussions about the oe-core layer
On 05/20/2011 04:52 PM, Darren Hart wrote:
>
>
> On 05/17/2011 11:07 AM, Nitin A Kamble wrote:
>> From: Nitin A Kamble<nitin.a.kamble@intel.com>
>>
>> gcc 4.6.0 is good enough to switch for x86, x86-64& arm now.
>>
>> I could build core-sdk images and run them through the qemu machines
>> when compiled with gcc 4.6.0.
>
> Has all of meta-intel been built using 4.6.0? If not, that would be a
> good test-case for the x86* architectures. Perhaps we could get a manual
> scheduler up on the autobuilder for that to make it easy to kick off?
>
> What do you think Beth?
>
Maybe after M1 RC1 gets built
Sau!
>>
>> mips& ppc are still not ready, mainly the kernel compilation issues
>> with gcc 4.6.0. These kernel issues are being worked on by Bruce.
>>
>> Pull URL: git://git.pokylinux.org/poky-contrib.git
>> Branch: nitin/misc
>> Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=nitin/misc
>>
>> Thanks,
>> Nitin A Kamble<nitin.a.kamble@intel.com>
>> ---
>>
>>
>> Nitin A Kamble (1):
>> tcmode-default: switch to gcc 4.6.0 for x86, x86-64& arm
>>
>> meta/conf/distro/include/tcmode-default.inc | 8 ++++++--
>> 1 files changed, 6 insertions(+), 2 deletions(-)
>>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [OE-core] [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm
@ 2011-05-21 0:10 ` Saul Wold
0 siblings, 0 replies; 8+ messages in thread
From: Saul Wold @ 2011-05-21 0:10 UTC (permalink / raw)
To: Darren Hart; +Cc: poky, Patches and discussions about the oe-core layer
On 05/20/2011 04:52 PM, Darren Hart wrote:
>
>
> On 05/17/2011 11:07 AM, Nitin A Kamble wrote:
>> From: Nitin A Kamble<nitin.a.kamble@intel.com>
>>
>> gcc 4.6.0 is good enough to switch for x86, x86-64& arm now.
>>
>> I could build core-sdk images and run them through the qemu machines
>> when compiled with gcc 4.6.0.
>
> Has all of meta-intel been built using 4.6.0? If not, that would be a
> good test-case for the x86* architectures. Perhaps we could get a manual
> scheduler up on the autobuilder for that to make it easy to kick off?
>
> What do you think Beth?
>
Maybe after M1 RC1 gets built
Sau!
>>
>> mips& ppc are still not ready, mainly the kernel compilation issues
>> with gcc 4.6.0. These kernel issues are being worked on by Bruce.
>>
>> Pull URL: git://git.pokylinux.org/poky-contrib.git
>> Branch: nitin/misc
>> Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=nitin/misc
>>
>> Thanks,
>> Nitin A Kamble<nitin.a.kamble@intel.com>
>> ---
>>
>>
>> Nitin A Kamble (1):
>> tcmode-default: switch to gcc 4.6.0 for x86, x86-64& arm
>>
>> meta/conf/distro/include/tcmode-default.inc | 8 ++++++--
>> 1 files changed, 6 insertions(+), 2 deletions(-)
>>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2011-05-21 0:14 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-17 18:07 [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm Nitin A Kamble
2011-05-17 18:07 ` [PATCH 1/1] tcmode-default: switch to gcc 4.6.0 for x86, " Nitin A Kamble
2011-05-20 15:06 ` [PATCH 0/1] switch to gcc 4.6.0 for x86 " Saul Wold
2011-05-20 15:06 ` [OE-core] " Saul Wold
2011-05-20 23:52 ` Darren Hart
2011-05-20 23:52 ` [OE-core] " Darren Hart
2011-05-21 0:10 ` [poky] " Saul Wold
2011-05-21 0:10 ` [OE-core] " Saul Wold
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.