* [XFSTEST Add Fallocate Punch Hole Tests 2/3 v4] Expand 252 punch hole test to cover additional corner cases
@ 2011-05-26 2:34 Allison Henderson
2011-06-01 23:01 ` Allison Henderson
0 siblings, 1 reply; 2+ messages in thread
From: Allison Henderson @ 2011-05-26 2:34 UTC (permalink / raw)
To: xfs-oss
This patch adds additional punch hole tests to 252
that were used to test ext4 punch hole. The _test_generic_punch
routine has been modified to accept two new flags:
-k To keep the test file between tests.
This will test the handling of existing holes
-d To not sync the file between tests.
This will test the handling of delayed extents
Four new corner cases have also been added to the routine:
14. data -> hole @ EOF
15. data -> hole @ 0
16. data -> cache cold ->hole
17. data -> hole in single block file
Signed-off-by: Allison Henderson <achender@us.ibm.com>
---
:100755 100755 dfdf3f8... 5efa243... M 252
:100644 100644 cd8e4b4... 930c924... M 252.out
:100644 100644 e2da5d8... ddf63b0... M common.punch
252 | 10 +++
252.out | 192 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
common.punch | 150 ++++++++++++++++++++++++++++++++++++++-------
3 files changed, 330 insertions(+), 22 deletions(-)
diff --git a/252 b/252
index dfdf3f8..5efa243 100755
--- a/252
+++ b/252
@@ -52,6 +52,16 @@ _require_xfs_io_fiemap
testfile=$TEST_DIR/252.$$
+# Standard punch hole tests
_test_generic_punch falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
+# Delayed allocation punch hole tests
+_test_generic_punch -d falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
+
+# Multi hole punch tests
+_test_generic_punch -k falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
+
+# Delayed allocation multi punch hole tests
+_test_generic_punch -d -k falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
+
status=0 ; exit
diff --git a/252.out b/252.out
index cd8e4b4..930c924 100644
--- a/252.out
+++ b/252.out
@@ -45,3 +45,195 @@ QA output created by 252
0: [0..7]: data
1: [8..31]: hole
2: [32..39]: data
+ 14. data -> hole @ EOF
+0: [0..23]: data
+1: [24..39]: hole
+ 15. data -> hole @ 0
+0: [0..15]: hole
+1: [16..39]: data
+ 16. data -> cache cold ->hole
+0: [0..15]: hole
+1: [16..39]: data
+ 17. data -> hole in single block file
+0: [0..7]: data
+ 1. into a hole
+ 2. into allocated space
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 3. into unwritten space
+0: [0..7]: unwritten
+1: [8..23]: hole
+2: [24..39]: unwritten
+ 4. hole -> data
+0: [0..23]: hole
+1: [24..31]: data
+2: [32..39]: hole
+ 5. hole -> unwritten
+0: [0..23]: hole
+1: [24..31]: unwritten
+2: [32..39]: hole
+ 6. data -> hole
+0: [0..7]: data
+1: [8..39]: hole
+ 7. data -> unwritten
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..31]: unwritten
+3: [32..39]: hole
+ 8. unwritten -> hole
+0: [0..7]: unwritten
+1: [8..39]: hole
+ 9. unwritten -> data
+0: [0..7]: unwritten
+1: [8..23]: hole
+2: [24..31]: data
+3: [32..39]: hole
+ 10. hole -> data -> hole
+ 11. data -> hole -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 12. unwritten -> data -> unwritten
+0: [0..7]: unwritten
+1: [8..31]: hole
+2: [32..39]: unwritten
+ 13. data -> unwritten -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 14. data -> hole @ EOF
+0: [0..23]: data
+1: [24..39]: hole
+ 15. data -> hole @ 0
+0: [0..15]: hole
+1: [16..39]: data
+ 16. data -> cache cold ->hole
+0: [0..15]: hole
+1: [16..39]: data
+ 17. data -> hole in single block file
+0: [0..7]: data
+ 1. into a hole
+0: [0..7]: data
+1: [8..39]: hole
+ 2. into allocated space
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 3. into unwritten space
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 4. hole -> data
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 5. hole -> unwritten
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 6. data -> hole
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 7. data -> unwritten
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 8. unwritten -> hole
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 9. unwritten -> data
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 10. hole -> data -> hole
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 11. data -> hole -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 12. unwritten -> data -> unwritten
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 13. data -> unwritten -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 14. data -> hole @ EOF
+0: [0..23]: data
+1: [24..39]: hole
+ 15. data -> hole @ 0
+0: [0..15]: hole
+1: [16..39]: data
+ 16. data -> cache cold ->hole
+0: [0..15]: hole
+1: [16..39]: data
+ 17. data -> hole in single block file
+0: [0..7]: data
+ 1. into a hole
+0: [0..7]: data
+1: [8..39]: hole
+ 2. into allocated space
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 3. into unwritten space
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 4. hole -> data
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 5. hole -> unwritten
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 6. data -> hole
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 7. data -> unwritten
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 8. unwritten -> hole
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 9. unwritten -> data
+0: [0..7]: data
+1: [8..23]: hole
+2: [24..39]: data
+ 10. hole -> data -> hole
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 11. data -> hole -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 12. unwritten -> data -> unwritten
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 13. data -> unwritten -> data
+0: [0..7]: data
+1: [8..31]: hole
+2: [32..39]: data
+ 14. data -> hole @ EOF
+0: [0..23]: data
+1: [24..39]: hole
+ 15. data -> hole @ 0
+0: [0..15]: hole
+1: [16..39]: data
+ 16. data -> cache cold ->hole
+0: [0..15]: hole
+1: [16..39]: data
+ 17. data -> hole in single block file
+0: [0..7]: data
diff --git a/common.punch b/common.punch
index e2da5d8..ddf63b0 100644
--- a/common.punch
+++ b/common.punch
@@ -256,8 +256,39 @@ die_now()
# 11. data -> hole -> data
# 12. unwritten -> data -> unwritten
# 13. data -> unwritten -> data
+# 14. data -> hole @ EOF
+# 15. data -> hole @ 0
+# 16. data -> cache cold ->hole
+# 17. data -> hole in single block file
+#
+# Test file is removed, created and sync'd between tests.
+#
+# Use -k flag to keep the file between tests. This will
+# test the handling of pre-existing holes.
+#
+# Use the -d flag to not sync the file between tests.
+# This will test the handling of delayed extents
+#
_test_generic_punch()
{
+
+ remove_testfile=1
+ sync_cmd="-c fsync"
+ OPTIND=1
+ while getopts 'dk' OPTION
+ do
+ case $OPTION in
+ k) remove_testfile=
+ ;;
+ d) sync_cmd=
+ ;;
+ ?) echo Invalid flag
+ exit 1
+ ;;
+ esac
+ done
+ shift $(($OPTIND - 1))
+
alloc_cmd=$1
punch_cmd=$2
zero_cmd=$3 #if not testing zero just set to punch
@@ -267,22 +298,28 @@ _test_generic_punch()
xfs_io_opt=$7 #needs to be -F if not testing xfs
echo " 1. into a hole"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 2. into allocated space"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
- -c "pwrite 0 20k" -c "fsync" \
+ -c "pwrite 0 20k" $sync_cmd \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 3. into unwritten space"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 20k" \
-c "$zero_cmd 4k 8k" \
@@ -290,15 +327,19 @@ _test_generic_punch()
[ $? -ne 0 ] && die_now
echo " 4. hole -> data"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
- -c "pwrite 8k 8k" -c "fsync" \
+ -c "pwrite 8k 8k" $sync_cmd \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 5. hole -> unwritten"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 8k 8k" \
-c "$zero_cmd 4k 8k" \
@@ -306,24 +347,30 @@ _test_generic_punch()
[ $? -ne 0 ] && die_now
echo " 6. data -> hole"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
- -c "pwrite 0 8k" -c "fsync" \
+ -c "pwrite 0 8k" $sync_cmd \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 7. data -> unwritten"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
- -c "pwrite 0 8k" -c "fsync" \
+ -c "pwrite 0 8k" $sync_cmd \
-c "$alloc_cmd 8k 8k" \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 8. unwritten -> hole"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 8k" \
-c "$zero_cmd 4k 8k" \
@@ -331,49 +378,108 @@ _test_generic_punch()
[ $? -ne 0 ] && die_now
echo " 9. unwritten -> data"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 8k" \
- -c "pwrite 8k 8k" -c "fsync" \
+ -c "pwrite 8k 8k" $sync_cmd \
-c "$zero_cmd 4k 8k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 10. hole -> data -> hole"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
- -c "pwrite 8k 4k" -c "fsync" \
+ -c "pwrite 8k 4k" $sync_cmd \
-c "$zero_cmd 4k 12k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 11. data -> hole -> data"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 20k" \
-c "pwrite 0 8k" \
- -c "pwrite 12k 8k" -c "fsync" \
+ -c "pwrite 12k 8k" $sync_cmd \
-c "$punch_cmd 8k 4k" \
-c "$zero_cmd 4k 12k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 12. unwritten -> data -> unwritten"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 20k" \
- -c "pwrite 8k 4k" -c "fsync" \
+ -c "pwrite 8k 4k" $sync_cmd \
-c "$zero_cmd 4k 12k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
echo " 13. data -> unwritten -> data"
- rm -f $testfile
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
$XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
-c "$alloc_cmd 0 20k" \
- -c "pwrite 0k 8k" -c "fsync" \
+ -c "pwrite 0k 8k" $sync_cmd \
-c "pwrite 12k 8k" -c "fsync" \
-c "$zero_cmd 4k 12k" \
-c "$map_cmd -v" $testfile | $filter_cmd
[ $? -ne 0 ] && die_now
+
+ echo " 14. data -> hole @ EOF"
+ rm -f $testfile
+ $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
+ -c "pwrite 0 20k" $sync_cmd \
+ -c "$zero_cmd 12k 8k" \
+ -c "$map_cmd -v" $testfile | $filter_cmd
+ [ $? -ne 0 ] && die_now
+
+ echo " 15. data -> hole @ 0"
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
+ $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
+ -c "pwrite 0 20k" $sync_cmd \
+ -c "$zero_cmd 0k 8k" \
+ -c "$map_cmd -v" $testfile | $filter_cmd
+ [ $? -ne 0 ] && die_now
+
+ echo " 16. data -> cache cold ->hole"
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ rm -f $testfile.2
+ else
+ cp $testfile $testfile.2
+ fi
+ $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
+ -c "pwrite 8k 12k" -c "fsync" $testfile.2 \
+ > /dev/null
+ $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
+ -c "pwrite 0 20k" $sync_cmd \
+ -c "$zero_cmd 0k 8k" \
+ -c "fadvise -d" \
+ -c "$map_cmd -v" $testfile | $filter_cmd
+ diff $testfile $testfile.2
+ [ $? -ne 0 ] && die_now
+ rm -f $testfile.2
+
+ echo " 17. data -> hole in single block file"
+ if [ "$remove_testfile" ]; then
+ rm -f $testfile
+ fi
+ block_size=`stat -f $TEST_DEV | grep "Block size" | cut -d " " -f3`
+ $XFS_IO_PROG $xfs_io_opt -f -c "truncate $block_size" \
+ -c "pwrite 0 $block_size" $sync_cmd \
+ -c "$zero_cmd 128 128" \
+ -c "$map_cmd -v" $testfile | $filter_cmd
+ [ $? -ne 0 ] && die_now
+
}
--
1.7.1
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [XFSTEST Add Fallocate Punch Hole Tests 2/3 v4] Expand 252 punch hole test to cover additional corner cases
2011-05-26 2:34 [XFSTEST Add Fallocate Punch Hole Tests 2/3 v4] Expand 252 punch hole test to cover additional corner cases Allison Henderson
@ 2011-06-01 23:01 ` Allison Henderson
0 siblings, 0 replies; 2+ messages in thread
From: Allison Henderson @ 2011-06-01 23:01 UTC (permalink / raw)
To: xfs-oss
On 5/25/2011 7:34 PM, Allison Henderson wrote:
> This patch adds additional punch hole tests to 252
> that were used to test ext4 punch hole. The _test_generic_punch
> routine has been modified to accept two new flags:
>
> -k To keep the test file between tests.
> This will test the handling of existing holes
>
> -d To not sync the file between tests.
> This will test the handling of delayed extents
>
> Four new corner cases have also been added to the routine:
> 14. data -> hole @ EOF
> 15. data -> hole @ 0
> 16. data -> cache cold ->hole
> 17. data -> hole in single block file
>
>
> Signed-off-by: Allison Henderson<achender@us.ibm.com>
>
> ---
> :100755 100755 dfdf3f8... 5efa243... M 252
> :100644 100644 cd8e4b4... 930c924... M 252.out
> :100644 100644 e2da5d8... ddf63b0... M common.punch
> 252 | 10 +++
> 252.out | 192 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> common.punch | 150 ++++++++++++++++++++++++++++++++++++++-------
> 3 files changed, 330 insertions(+), 22 deletions(-)
>
> diff --git a/252 b/252
> index dfdf3f8..5efa243 100755
> --- a/252
> +++ b/252
> @@ -52,6 +52,16 @@ _require_xfs_io_fiemap
>
> testfile=$TEST_DIR/252.$$
>
> +# Standard punch hole tests
> _test_generic_punch falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
>
> +# Delayed allocation punch hole tests
> +_test_generic_punch -d falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
> +
> +# Multi hole punch tests
> +_test_generic_punch -k falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
> +
> +# Delayed allocation multi punch hole tests
> +_test_generic_punch -d -k falloc fpunch fpunch fiemap _filter_fiemap $testfile -F
> +
> status=0 ; exit
> diff --git a/252.out b/252.out
> index cd8e4b4..930c924 100644
> --- a/252.out
> +++ b/252.out
> @@ -45,3 +45,195 @@ QA output created by 252
> 0: [0..7]: data
> 1: [8..31]: hole
> 2: [32..39]: data
> + 14. data -> hole @ EOF
> +0: [0..23]: data
> +1: [24..39]: hole
> + 15. data -> hole @ 0
> +0: [0..15]: hole
> +1: [16..39]: data
> + 16. data -> cache cold ->hole
> +0: [0..15]: hole
> +1: [16..39]: data
> + 17. data -> hole in single block file
> +0: [0..7]: data
> + 1. into a hole
> + 2. into allocated space
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 3. into unwritten space
> +0: [0..7]: unwritten
> +1: [8..23]: hole
> +2: [24..39]: unwritten
> + 4. hole -> data
> +0: [0..23]: hole
> +1: [24..31]: data
> +2: [32..39]: hole
> + 5. hole -> unwritten
> +0: [0..23]: hole
> +1: [24..31]: unwritten
> +2: [32..39]: hole
> + 6. data -> hole
> +0: [0..7]: data
> +1: [8..39]: hole
> + 7. data -> unwritten
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..31]: unwritten
> +3: [32..39]: hole
> + 8. unwritten -> hole
> +0: [0..7]: unwritten
> +1: [8..39]: hole
> + 9. unwritten -> data
> +0: [0..7]: unwritten
> +1: [8..23]: hole
> +2: [24..31]: data
> +3: [32..39]: hole
> + 10. hole -> data -> hole
> + 11. data -> hole -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 12. unwritten -> data -> unwritten
> +0: [0..7]: unwritten
> +1: [8..31]: hole
> +2: [32..39]: unwritten
> + 13. data -> unwritten -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 14. data -> hole @ EOF
> +0: [0..23]: data
> +1: [24..39]: hole
> + 15. data -> hole @ 0
> +0: [0..15]: hole
> +1: [16..39]: data
> + 16. data -> cache cold ->hole
> +0: [0..15]: hole
> +1: [16..39]: data
> + 17. data -> hole in single block file
> +0: [0..7]: data
> + 1. into a hole
> +0: [0..7]: data
> +1: [8..39]: hole
> + 2. into allocated space
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 3. into unwritten space
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 4. hole -> data
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 5. hole -> unwritten
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 6. data -> hole
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 7. data -> unwritten
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 8. unwritten -> hole
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 9. unwritten -> data
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 10. hole -> data -> hole
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 11. data -> hole -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 12. unwritten -> data -> unwritten
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 13. data -> unwritten -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 14. data -> hole @ EOF
> +0: [0..23]: data
> +1: [24..39]: hole
> + 15. data -> hole @ 0
> +0: [0..15]: hole
> +1: [16..39]: data
> + 16. data -> cache cold ->hole
> +0: [0..15]: hole
> +1: [16..39]: data
> + 17. data -> hole in single block file
> +0: [0..7]: data
> + 1. into a hole
> +0: [0..7]: data
> +1: [8..39]: hole
> + 2. into allocated space
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 3. into unwritten space
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 4. hole -> data
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 5. hole -> unwritten
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 6. data -> hole
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 7. data -> unwritten
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 8. unwritten -> hole
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 9. unwritten -> data
> +0: [0..7]: data
> +1: [8..23]: hole
> +2: [24..39]: data
> + 10. hole -> data -> hole
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 11. data -> hole -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 12. unwritten -> data -> unwritten
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 13. data -> unwritten -> data
> +0: [0..7]: data
> +1: [8..31]: hole
> +2: [32..39]: data
> + 14. data -> hole @ EOF
> +0: [0..23]: data
> +1: [24..39]: hole
> + 15. data -> hole @ 0
> +0: [0..15]: hole
> +1: [16..39]: data
> + 16. data -> cache cold ->hole
> +0: [0..15]: hole
> +1: [16..39]: data
> + 17. data -> hole in single block file
> +0: [0..7]: data
> diff --git a/common.punch b/common.punch
> index e2da5d8..ddf63b0 100644
> --- a/common.punch
> +++ b/common.punch
> @@ -256,8 +256,39 @@ die_now()
> # 11. data -> hole -> data
> # 12. unwritten -> data -> unwritten
> # 13. data -> unwritten -> data
> +# 14. data -> hole @ EOF
> +# 15. data -> hole @ 0
> +# 16. data -> cache cold ->hole
> +# 17. data -> hole in single block file
> +#
> +# Test file is removed, created and sync'd between tests.
> +#
> +# Use -k flag to keep the file between tests. This will
> +# test the handling of pre-existing holes.
> +#
> +# Use the -d flag to not sync the file between tests.
> +# This will test the handling of delayed extents
> +#
> _test_generic_punch()
> {
> +
> + remove_testfile=1
> + sync_cmd="-c fsync"
> + OPTIND=1
> + while getopts 'dk' OPTION
> + do
> + case $OPTION in
> + k) remove_testfile=
> + ;;
> + d) sync_cmd=
> + ;;
> + ?) echo Invalid flag
> + exit 1
> + ;;
> + esac
> + done
> + shift $(($OPTIND - 1))
> +
> alloc_cmd=$1
> punch_cmd=$2
> zero_cmd=$3 #if not testing zero just set to punch
> @@ -267,22 +298,28 @@ _test_generic_punch()
> xfs_io_opt=$7 #needs to be -F if not testing xfs
>
> echo " 1. into a hole"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 2. into allocated space"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> - -c "pwrite 0 20k" -c "fsync" \
> + -c "pwrite 0 20k" $sync_cmd \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 3. into unwritten space"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 20k" \
> -c "$zero_cmd 4k 8k" \
> @@ -290,15 +327,19 @@ _test_generic_punch()
> [ $? -ne 0 ]&& die_now
>
> echo " 4. hole -> data"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> - -c "pwrite 8k 8k" -c "fsync" \
> + -c "pwrite 8k 8k" $sync_cmd \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 5. hole -> unwritten"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 8k 8k" \
> -c "$zero_cmd 4k 8k" \
> @@ -306,24 +347,30 @@ _test_generic_punch()
> [ $? -ne 0 ]&& die_now
>
> echo " 6. data -> hole"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> - -c "pwrite 0 8k" -c "fsync" \
> + -c "pwrite 0 8k" $sync_cmd \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 7. data -> unwritten"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> - -c "pwrite 0 8k" -c "fsync" \
> + -c "pwrite 0 8k" $sync_cmd \
> -c "$alloc_cmd 8k 8k" \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 8. unwritten -> hole"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 8k" \
> -c "$zero_cmd 4k 8k" \
> @@ -331,49 +378,108 @@ _test_generic_punch()
> [ $? -ne 0 ]&& die_now
>
> echo " 9. unwritten -> data"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 8k" \
> - -c "pwrite 8k 8k" -c "fsync" \
> + -c "pwrite 8k 8k" $sync_cmd \
> -c "$zero_cmd 4k 8k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 10. hole -> data -> hole"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> - -c "pwrite 8k 4k" -c "fsync" \
> + -c "pwrite 8k 4k" $sync_cmd \
> -c "$zero_cmd 4k 12k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 11. data -> hole -> data"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 20k" \
> -c "pwrite 0 8k" \
> - -c "pwrite 12k 8k" -c "fsync" \
> + -c "pwrite 12k 8k" $sync_cmd \
> -c "$punch_cmd 8k 4k" \
> -c "$zero_cmd 4k 12k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
>
> echo " 12. unwritten -> data -> unwritten"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 20k" \
> - -c "pwrite 8k 4k" -c "fsync" \
> + -c "pwrite 8k 4k" $sync_cmd \
> -c "$zero_cmd 4k 12k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
Hi all,
I had some questions about test 12. The output for this test is:
12. unwritten -> data -> unwritten
0: [0..7]: unwritten
1: [8..31]: hole
2: [32..39]: unwritten
But ext4 gets data extents here instead of unwritten extents (on the
first test with the fsync flag on). I did some investigating and it
looks like the fsync command causes the extents to be written out before
the punch hole operation even starts. So it makes sense to me that it
should end up with data extents. Can someone explain why the golden
output has unwritten extents here? Thx!
Allison Henderson
>
> echo " 13. data -> unwritten -> data"
> - rm -f $testfile
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> -c "$alloc_cmd 0 20k" \
> - -c "pwrite 0k 8k" -c "fsync" \
> + -c "pwrite 0k 8k" $sync_cmd \
> -c "pwrite 12k 8k" -c "fsync" \
> -c "$zero_cmd 4k 12k" \
> -c "$map_cmd -v" $testfile | $filter_cmd
> [ $? -ne 0 ]&& die_now
> +
> + echo " 14. data -> hole @ EOF"
> + rm -f $testfile
> + $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> + -c "pwrite 0 20k" $sync_cmd \
> + -c "$zero_cmd 12k 8k" \
> + -c "$map_cmd -v" $testfile | $filter_cmd
> + [ $? -ne 0 ]&& die_now
> +
> + echo " 15. data -> hole @ 0"
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> + $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> + -c "pwrite 0 20k" $sync_cmd \
> + -c "$zero_cmd 0k 8k" \
> + -c "$map_cmd -v" $testfile | $filter_cmd
> + [ $? -ne 0 ]&& die_now
> +
> + echo " 16. data -> cache cold ->hole"
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + rm -f $testfile.2
> + else
> + cp $testfile $testfile.2
> + fi
> + $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> + -c "pwrite 8k 12k" -c "fsync" $testfile.2 \
> + > /dev/null
> + $XFS_IO_PROG $xfs_io_opt -f -c "truncate 20k" \
> + -c "pwrite 0 20k" $sync_cmd \
> + -c "$zero_cmd 0k 8k" \
> + -c "fadvise -d" \
> + -c "$map_cmd -v" $testfile | $filter_cmd
> + diff $testfile $testfile.2
> + [ $? -ne 0 ]&& die_now
> + rm -f $testfile.2
> +
> + echo " 17. data -> hole in single block file"
> + if [ "$remove_testfile" ]; then
> + rm -f $testfile
> + fi
> + block_size=`stat -f $TEST_DEV | grep "Block size" | cut -d " " -f3`
> + $XFS_IO_PROG $xfs_io_opt -f -c "truncate $block_size" \
> + -c "pwrite 0 $block_size" $sync_cmd \
> + -c "$zero_cmd 128 128" \
> + -c "$map_cmd -v" $testfile | $filter_cmd
> + [ $? -ne 0 ]&& die_now
> +
> }
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-06-01 23:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-26 2:34 [XFSTEST Add Fallocate Punch Hole Tests 2/3 v4] Expand 252 punch hole test to cover additional corner cases Allison Henderson
2011-06-01 23:01 ` Allison Henderson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.