* [lm-sensors] Testing results for Nuvoton W83677HG-I
@ 2011-05-21 9:20 Arseny Klimovsky
2011-05-27 1:09 ` Guenter Roeck
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Arseny Klimovsky @ 2011-05-21 9:20 UTC (permalink / raw)
To: lm-sensors
Hello list,
I've tested a driver at http://www.roeck-us.net/linux/drivers/w83627ehf/
with my motherboard Intel DH67BL.
I'm not sure what exactly should be tested, I'm most interested in fan
speeds.
They are correct, values are practically the same like in BIOS.
On my board fan1 is rear fan, fan2 is CPU fan and fan3 is front fan.
--
Arseny Klimovsky
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [lm-sensors] Testing results for Nuvoton W83677HG-I
2011-05-21 9:20 [lm-sensors] Testing results for Nuvoton W83677HG-I Arseny Klimovsky
@ 2011-05-27 1:09 ` Guenter Roeck
2011-05-29 13:47 ` Arseny Klimovsky
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2011-05-27 1:09 UTC (permalink / raw)
To: lm-sensors
Hi Arseny,
On Sat, May 21, 2011 at 05:20:43AM -0400, Arseny Klimovsky wrote:
> Hello list,
>
> I've tested a driver at http://www.roeck-us.net/linux/drivers/w83627ehf/
> with my motherboard Intel DH67BL.
>
> I'm not sure what exactly should be tested, I'm most interested in fan
> speeds.
> They are correct, values are practically the same like in BIOS.
> On my board fan1 is rear fan, fan2 is CPU fan and fan3 is front fan.
>
Fan speed is the most interesting at this point, since I could not test
that myself.
Thanks a lot for the feedback!
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [lm-sensors] Testing results for Nuvoton W83677HG-I
2011-05-21 9:20 [lm-sensors] Testing results for Nuvoton W83677HG-I Arseny Klimovsky
2011-05-27 1:09 ` Guenter Roeck
@ 2011-05-29 13:47 ` Arseny Klimovsky
2011-05-29 15:44 ` Jean Delvare
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Arseny Klimovsky @ 2011-05-29 13:47 UTC (permalink / raw)
To: lm-sensors
Guenter Roeck пишет:
> Hi Arseny,
>
> On Sat, May 21, 2011 at 05:20:43AM -0400, Arseny Klimovsky wrote:
>> Hello list,
>>
>> I've tested a driver at http://www.roeck-us.net/linux/drivers/w83627ehf/
>> with my motherboard Intel DH67BL.
>>
>> I'm not sure what exactly should be tested, I'm most interested in fan
>> speeds.
>> They are correct, values are practically the same like in BIOS.
>> On my board fan1 is rear fan, fan2 is CPU fan and fan3 is front fan.
>>
> Fan speed is the most interesting at this point, since I could not test
> that myself.
>
> Thanks a lot for the feedback!
>
> Guenter
With this driver I created a configuration for my board. It can be added
to wiki, but I have some questions:
1. Multiplier for +12V is strange (11), but it gets exactly correct
results (12.14V switching to 12.23V and back). Can this be correct?
2. Statement "ignore temp5" does not take effect. I see line about "PECI
Agent 1"
The sensors output with the config:
nct6775-isa-0290
Adapter: ISA adapter
Vcore: +1.06 V (min = +0.60 V, max = +1.60 V)
+12V: +12.14 V (min = +11.09 V, max = +12.94 V)
AVCC: +3.41 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.41 V (min = +2.98 V, max = +3.63 V)
+5V: +5.04 V (min = +4.60 V, max = +5.40 V)
MemV: +1.56 V (min = +0.40 V, max = +2.00 V)
PCHV: +1.06 V (min = +0.60 V, max = +1.60 V)
3VSB: +3.39 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.28 V (min = +2.70 V, max = +3.30 V)
Rear fan: 727 RPM (min = 251 RPM, div = 32)
CPU fan: 917 RPM (min = 251 RPM, div = 32)
Front fan: 740 RPM (min = 251 RPM, div = 32)
VR temp: +35.0°C (high = +90.0°C, hyst = +75.0°C) sensor = diode
CPU temp: +35.5°C (high = +93.0°C, hyst = +75.0°C) sensor = diode
Memory DIMM temp: +34.5°C (high = +90.0°C, hyst = +75.0°C) sensor = diode
PCH temp: +47.0°C
PECI Agent 1: +0.0°C (high = +80.0°C, hyst = +75.0°C)
The configuration:
# Created for board DH67BL using information from Inte Desktop Utilities
and BIOS
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.
chip "nct6775-isa-0290"
# Fans
label fan1 "Rear fan"
set fan1_min 250 # From IDU
label fan2 "CPU fan"
set fan2_min 250 # From IDU
label fan3 "Front fan"
set fan3_min 250 # From IDU
# There is no fan4 on the board
ignore fan4
# Voltages
# Processor Vcc
label in0 "Vcore"
set in0_min 0.6 # From IDU
set in0_max 1.6 # From IDU
# This should be "12 Volts", but computations are strange
label in1 "+12V"
compute in1 11*@, @/11
set in1_min 11.1 # From IDU
set in1_max 12.9 # From IDU
# AVCC(?) - Not shown in BIOS or IDU
label in2 "AVCC"
set in2_min 3.0 # same as +3.3V
set in2_max 3.6 # same as +3.3V
# +3.3 Volts
label in3 "+3.3V"
set in3_min 3.0 # from IDU
set in3_max 3.6 # from IDU
# +5 Volts
label in4 "+5V"
compute in4 5*@, @/5
set in4_min 4.6 # from IDU
set in4_max 5.4 # from IDU
# Memory Vcc ("SDRAM Vcc" in IDU)
label in5 "MemV"
compute in5 1.5*@, @/1.5
set in5_min 0.4 # from IDU
set in5_max 2.0 # from IDU
# PCH Vcc
label in6 "PCHV"
set in6_min 0.6 # from IDU
set in6_max 1.6 # from IDU
# +3.3 Volt Standby
label in7 "3VSB"
set in7_min 3.0 # from IDU
set in7_max 3.6 # from IDU
# VBAT(?) - Not shown in BIOS or IDU
label in8 "Vbat"
# It shows +2.050 V, seems to be not used
ignore cpu0_vid
# Temperatures
# Labeled as "SYSTIN"
# Guess!
label temp1 "VR temp"
set temp1_max 90 # From IDU
set temp1_max_hyst 75
# Labeled as "CPUTIN"
label temp2 "CPU temp"
set temp2_max 93 # From IDU
set temp2_max_hyst 75
# Labeled as "PECI Agent 0"
# Guess!
label temp3 "Memory DIMM temp"
set temp3_max 90 # From IDU
set temp3_max_hyst 75
# Labeled as "PCH_CHIP_TEMP"
label temp4 "PCH temp"
# Labeled as "PECI Agent 1"
# Not used
ignore temp5
--
Arseny Klimovsky
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [lm-sensors] Testing results for Nuvoton W83677HG-I
2011-05-21 9:20 [lm-sensors] Testing results for Nuvoton W83677HG-I Arseny Klimovsky
2011-05-27 1:09 ` Guenter Roeck
2011-05-29 13:47 ` Arseny Klimovsky
@ 2011-05-29 15:44 ` Jean Delvare
2011-05-29 19:49 ` Arseny Klimovsky
2011-06-11 13:12 ` Jean Delvare
4 siblings, 0 replies; 6+ messages in thread
From: Jean Delvare @ 2011-05-29 15:44 UTC (permalink / raw)
To: lm-sensors
On Sun, 29 May 2011 17:47:18 +0400, Arseny Klimovsky wrote:
> With this driver I created a configuration for my board. It can be added
> to wiki, but I have some questions:
> 1. Multiplier for +12V is strange (11), but it gets exactly correct
> results (12.14V switching to 12.23V and back). Can this be correct?
It is perfectly possible, yes.
> 2. Statement "ignore temp5" does not take effect. I see line about "PECI
> Agent 1"
Maybe it's not temp5 but temp6 or more. Try "sensors -u" to find out
the right number.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [lm-sensors] Testing results for Nuvoton W83677HG-I
2011-05-21 9:20 [lm-sensors] Testing results for Nuvoton W83677HG-I Arseny Klimovsky
` (2 preceding siblings ...)
2011-05-29 15:44 ` Jean Delvare
@ 2011-05-29 19:49 ` Arseny Klimovsky
2011-06-11 13:12 ` Jean Delvare
4 siblings, 0 replies; 6+ messages in thread
From: Arseny Klimovsky @ 2011-05-29 19:49 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 671 bytes --]
Jean Delvare пишет:
> On Sun, 29 May 2011 17:47:18 +0400, Arseny Klimovsky wrote:
>> 2. Statement "ignore temp5" does not take effect. I see line about "PECI
>> Agent 1"
> Maybe it's not temp5 but temp6 or more. Try "sensors -u" to find out
> the right number.
Thank you, Jean!
I've tried temp5..7 and no results. But with "sensors -u" it figured out
to be temp8 :)
I think the configuration can now be added to wiki, I've attached the file.
According to the message
http://lists.lm-sensors.org/pipermail/lm-sensors/2011-March/031775.html
this confguration can be used for DH67CL board, possibly with very small
changes.
--
Arseny Klimovsky
[-- Attachment #2: DH67BL.conf --]
[-- Type: text/plain, Size: 2052 bytes --]
# Created for board DH67BL using information from Inte Desktop Utilities and BIOS
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.
chip "nct6775-isa-0290"
# Fans
label fan1 "Rear fan"
set fan1_min 250 # From IDU
label fan2 "CPU fan"
set fan2_min 250 # From IDU
label fan3 "Front fan"
set fan3_min 250 # From IDU
# There is no fan4 on the board
ignore fan4
# Voltages
# Processor Vcc
label in0 "Vcore"
set in0_min 0.6 # From IDU
set in0_max 1.6 # From IDU
# This should be "12 Volts", but computations are strange
label in1 "+12V"
compute in1 11*@, @/11
set in1_min 11.1 # From IDU
set in1_max 12.9 # From IDU
# AVCC(?) - Not shown in BIOS or IDU
label in2 "AVCC"
set in2_min 3.0 # same as +3.3V
set in2_max 3.6 # same as +3.3V
# +3.3 Volts
label in3 "+3.3V"
set in3_min 3.0 # from IDU
set in3_max 3.6 # from IDU
# +5 Volts
label in4 "+5V"
compute in4 5*@, @/5
set in4_min 4.6 # from IDU
set in4_max 5.4 # from IDU
# Memory Vcc ("SDRAM Vcc" in IDU)
label in5 "MemV"
compute in5 1.5*@, @/1.5
set in5_min 0.4 # from IDU
set in5_max 2.0 # from IDU
# PCH Vcc
label in6 "PCHV"
set in6_min 0.6 # from IDU
set in6_max 1.6 # from IDU
# +3.3 Volt Standby
label in7 "3VSB"
set in7_min 3.0 # from IDU
set in7_max 3.6 # from IDU
# VBAT(?) - Not shown in BIOS or IDU
label in8 "Vbat"
# It shows +2.050 V, seems to be not used
ignore cpu0_vid
# Temperatures
# Labeled as "SYSTIN"
# Guess!
label temp1 "VR temp"
set temp1_max 90 # From IDU
set temp1_max_hyst 75 # From IDU
# Labeled as "CPUTIN"
label temp2 "CPU temp"
set temp2_max 93 # From IDU
set temp2_max_hyst 75 # From IDU
# Labeled as "PECI Agent 0"
# Guess!
label temp3 "Memory DIMM temp"
set temp3_max 90 # From IDU
set temp3_max_hyst 75 # From IDU
# Labeled as "PCH_CHIP_TEMP"
label temp4 "PCH temp"
# Labeled as "PECI Agent 1"
# Not used
ignore temp8
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [lm-sensors] Testing results for Nuvoton W83677HG-I
2011-05-21 9:20 [lm-sensors] Testing results for Nuvoton W83677HG-I Arseny Klimovsky
` (3 preceding siblings ...)
2011-05-29 19:49 ` Arseny Klimovsky
@ 2011-06-11 13:12 ` Jean Delvare
4 siblings, 0 replies; 6+ messages in thread
From: Jean Delvare @ 2011-06-11 13:12 UTC (permalink / raw)
To: lm-sensors
On Sun, 29 May 2011 23:49:02 +0400, Arseny Klimovsky wrote:
> Jean Delvare пишет:
> > On Sun, 29 May 2011 17:47:18 +0400, Arseny Klimovsky wrote:
> >> 2. Statement "ignore temp5" does not take effect. I see line about "PECI
> >> Agent 1"
> > Maybe it's not temp5 but temp6 or more. Try "sensors -u" to find out
> > the right number.
> Thank you, Jean!
> I've tried temp5..7 and no results. But with "sensors -u" it figured out
> to be temp8 :)
>
> I think the configuration can now be added to wiki, I've attached the file.
> According to the message
> http://lists.lm-sensors.org/pipermail/lm-sensors/2011-March/031775.html
> this confguration can be used for DH67CL board, possibly with very small
> changes.
Added to the wiki:
http://www.lm-sensors.org/wiki/Configurations/Intel/DH67BL
Thanks for your contribution!
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-06-11 13:12 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-21 9:20 [lm-sensors] Testing results for Nuvoton W83677HG-I Arseny Klimovsky
2011-05-27 1:09 ` Guenter Roeck
2011-05-29 13:47 ` Arseny Klimovsky
2011-05-29 15:44 ` Jean Delvare
2011-05-29 19:49 ` Arseny Klimovsky
2011-06-11 13:12 ` Jean Delvare
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.