* asoc: no valid backend routes for PCM: SDP4430 Media @ 2011-06-07 0:13 hong zhang 2011-06-07 8:38 ` Liam Girdwood 0 siblings, 1 reply; 12+ messages in thread From: hong zhang @ 2011-06-07 0:13 UTC (permalink / raw) To: alsa-devel List, After capturing data from DMIC on OMAP4 blaze board with kernel 2.6.38 and save wav data to 38.wav. But aplay complains "no valid backend routes". See following, $aplay -f dat 38.wav [ 157.167724] asoc: no valid backend routes for PCM: SDP4430 Media aplay: main:654: audio open error: Invalid argument $ uname -a Linux ubuntu 2.6.38.4+ #58 SMP PREEMPT Fri Jun 3 09:44:19 PDT 2011 armv7l GNU/Linux Does ALSA add new functionality of backend? Thanks. ---henry ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: asoc: no valid backend routes for PCM: SDP4430 Media 2011-06-07 0:13 asoc: no valid backend routes for PCM: SDP4430 Media hong zhang @ 2011-06-07 8:38 ` Liam Girdwood 2011-06-07 19:59 ` hong zhang 0 siblings, 1 reply; 12+ messages in thread From: Liam Girdwood @ 2011-06-07 8:38 UTC (permalink / raw) To: hong zhang; +Cc: alsa-devel On 07/06/11 01:13, hong zhang wrote: > List, > > After capturing data from DMIC on OMAP4 blaze board with kernel 2.6.38 and save wav data to 38.wav. > > But aplay complains "no valid backend routes". See following, > > $aplay -f dat 38.wav > [ 157.167724] asoc: no valid backend routes for PCM: SDP4430 Media > aplay: main:654: audio open error: Invalid argument > This means you have not configured an audio route for playback (i.e. the audio is not routed anywhere from pcm hw:0,0). Use alsamixer and configure the kcontrols to define the audio path. The kcontrol mappings to audio paths are detailed here for OMAP4 :- http://omappedia.org/wiki/Audio_Drive_Arch Liam ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: asoc: no valid backend routes for PCM: SDP4430 Media 2011-06-07 8:38 ` Liam Girdwood @ 2011-06-07 19:59 ` hong zhang 2011-06-08 14:22 ` Liam Girdwood 0 siblings, 1 reply; 12+ messages in thread From: hong zhang @ 2011-06-07 19:59 UTC (permalink / raw) To: Liam Girdwood; +Cc: alsa-devel Liam, Actually, I could not prove DMIC on OMAP4 blaze board is working in both kernel 2.6.35 and 2.6.38 using arecord and gstreamer-alsa. In 2.6.35, arecord returns 44 bytes with read error In 2.6.38, arecord collects native data. Gstreamer-alsa could not get voice after turning off analog captures using amixer. Any information regarding DMIC on OMAP4? I see people send DMIC patch to 2.6.38. Please advise. ---henry --- On Tue, 6/7/11, Liam Girdwood <lrg@ti.com> wrote: > From: Liam Girdwood <lrg@ti.com> > Subject: Re: [alsa-devel] asoc: no valid backend routes for PCM: SDP4430 Media > To: "hong zhang" <henryzhang62@yahoo.com> > Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org> > Date: Tuesday, June 7, 2011, 3:38 AM > On 07/06/11 01:13, hong zhang wrote: > > List, > > > > After capturing data from DMIC on OMAP4 blaze board > with kernel 2.6.38 and save wav data to 38.wav. > > > > But aplay complains "no valid backend routes". See > following, > > > > $aplay -f dat 38.wav > > [ 157.167724] asoc: no valid backend routes for > PCM: SDP4430 Media > > aplay: main:654: audio open error: Invalid argument > > > > This means you have not configured an audio route for > playback (i.e. the audio is not routed anywhere from pcm > hw:0,0). Use alsamixer and configure the kcontrols to define > the audio path. The kcontrol mappings to audio paths are > detailed here for OMAP4 :- > > http://omappedia.org/wiki/Audio_Drive_Arch > > Liam > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: asoc: no valid backend routes for PCM: SDP4430 Media 2011-06-07 19:59 ` hong zhang @ 2011-06-08 14:22 ` Liam Girdwood 2011-06-08 19:08 ` hong zhang 0 siblings, 1 reply; 12+ messages in thread From: Liam Girdwood @ 2011-06-08 14:22 UTC (permalink / raw) To: hong zhang; +Cc: alsa-devel On 07/06/11 20:59, hong zhang wrote: > Liam, > > Actually, I could not prove DMIC on OMAP4 blaze board is working in both kernel 2.6.35 and 2.6.38 using arecord and gstreamer-alsa. > > In 2.6.35, arecord returns 44 bytes with read error > In 2.6.38, arecord collects native data. > > Gstreamer-alsa could not get voice after turning off analog captures using amixer. > > Any information regarding DMIC on OMAP4? I see people send DMIC patch to 2.6.38. > DMIC works on OMAP4, can you try my branch :- https://gitorious.org/omap-audio/linux-audio/commits/lrg/topic/omap-asoc-next-3.1 Liam ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: asoc: no valid backend routes for PCM: SDP4430 Media 2011-06-08 14:22 ` Liam Girdwood @ 2011-06-08 19:08 ` hong zhang 2011-06-09 9:42 ` Liam Girdwood 0 siblings, 1 reply; 12+ messages in thread From: hong zhang @ 2011-06-08 19:08 UTC (permalink / raw) To: Liam Girdwood; +Cc: alsa-devel Liam, I have downloaded kernel tar ball. Three questions need your help. 1. which defconfig should be used in arch/arm/configs? I do not see OMAP4 for SDP4430 (blaze board). Panda does not have DMIC only blaze has it. 2. On blaze board, I have to turn off two analog captures and leave DMIC open. Can you verify my gst-launch is correct? I cannot capture voice from DMIC on OMAP4 blaze board us it. gst-launch-0.10 -v alsasrc num-buffers=1000 ! 'audio/x-raw-int,rate=8000,channels=1,endianness=1234,width=16,depth=16' ! audioconvert ! wavenc! filesink location=/home/normanc/Desktop/8000.wav 3. If I specify DMIC device, command is rejected. gst-launch-0.10 -v alsasrc device="hw:0,10" num-buffers=1000 ! 'audio/x-raw-int, rate=8000,channels=1,endianness=1234,width=16,depth=16' ! audioconvert ! wavenc! filesink location=/home/normanc/Desktop/8000.wav TI support team in France says item 2 should work for DMIC. But I simply could not get it. TI team says item 2 works for "official release 2.6.35-990-omap4 #9". I have spent 1 week on it with 2.6.35-990-omap4 #9 Please advise! Thanks. ---henry --- On Wed, 6/8/11, Liam Girdwood <lrg@ti.com> wrote: > From: Liam Girdwood <lrg@ti.com> > Subject: Re: [alsa-devel] asoc: no valid backend routes for PCM: SDP4430 Media > To: "hong zhang" <henryzhang62@yahoo.com> > Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org> > Date: Wednesday, June 8, 2011, 9:22 AM > On 07/06/11 20:59, hong zhang wrote: > > Liam, > > > > Actually, I could not prove DMIC on OMAP4 blaze board > is working in both kernel 2.6.35 and 2.6.38 using arecord > and gstreamer-alsa. > > > > In 2.6.35, arecord returns 44 bytes with read error > > In 2.6.38, arecord collects native data. > > > > Gstreamer-alsa could not get voice after turning off > analog captures using amixer. > > > > Any information regarding DMIC on OMAP4? I see people > send DMIC patch to 2.6.38. > > > > DMIC works on OMAP4, can you try my branch :- > > https://gitorious.org/omap-audio/linux-audio/commits/lrg/topic/omap-asoc-next-3.1 > > Liam > > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: asoc: no valid backend routes for PCM: SDP4430 Media 2011-06-08 19:08 ` hong zhang @ 2011-06-09 9:42 ` Liam Girdwood 2011-06-09 17:45 ` hong zhang 0 siblings, 1 reply; 12+ messages in thread From: Liam Girdwood @ 2011-06-09 9:42 UTC (permalink / raw) To: hong zhang; +Cc: alsa-devel Hi Henry, On 08/06/11 20:08, hong zhang wrote: > Liam, > > I have downloaded kernel tar ball. Three questions need your help. > > 1. which defconfig should be used in arch/arm/configs? > I do not see OMAP4 for SDP4430 (blaze board). Panda does not have DMIC > only blaze has it. > There is an omap2plus defconfig. > 2. On blaze board, I have to turn off two analog captures and leave DMIC open. Can you verify my gst-launch is correct? I cannot capture voice from DMIC on OMAP4 blaze board us it. > > gst-launch-0.10 -v alsasrc num-buffers=1000 ! 'audio/x-raw-int,rate=8000,channels=1,endianness=1234,width=16,depth=16' ! audioconvert ! wavenc! filesink location=/home/normanc/Desktop/8000.wav > > 3. If I specify DMIC device, command is rejected. > > gst-launch-0.10 -v alsasrc device="hw:0,10" num-buffers=1000 ! 'audio/x-raw-int, rate=8000,channels=1,endianness=1234,width=16,depth=16' ! audioconvert ! wavenc! filesink location=/home/normanc/Desktop/8000.wav > The easiest thing todo first is to get arecord working. Use hw:0,1 for DMIC and make sure you use alsamixer to configure the correct audio paths for DMIC to hw:0,1. > TI support team in France says item 2 should work for DMIC. But I simply could not get it. TI team says item 2 works for "official release 2.6.35-990-omap4 #9". > > I have spent 1 week on it with 2.6.35-990-omap4 #9 > > Please advise! > It does look like you have not configured the audio route here for the DMIC to hw:0,1. Use the ABE diagram to create your route with alsamixer. Liam > Thanks. > > ---henry > > --- On Wed, 6/8/11, Liam Girdwood <lrg@ti.com> wrote: > >> From: Liam Girdwood <lrg@ti.com> >> Subject: Re: [alsa-devel] asoc: no valid backend routes for PCM: SDP4430 Media >> To: "hong zhang" <henryzhang62@yahoo.com> >> Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org> >> Date: Wednesday, June 8, 2011, 9:22 AM >> On 07/06/11 20:59, hong zhang wrote: >>> Liam, >>> >>> Actually, I could not prove DMIC on OMAP4 blaze board >> is working in both kernel 2.6.35 and 2.6.38 using arecord >> and gstreamer-alsa. >>> >>> In 2.6.35, arecord returns 44 bytes with read error >>> In 2.6.38, arecord collects native data. >>> >>> Gstreamer-alsa could not get voice after turning off >> analog captures using amixer. >>> >>> Any information regarding DMIC on OMAP4? I see people >> send DMIC patch to 2.6.38. >>> >> >> DMIC works on OMAP4, can you try my branch :- >> >> https://gitorious.org/omap-audio/linux-audio/commits/lrg/topic/omap-asoc-next-3.1 >> >> Liam >> >> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: asoc: no valid backend routes for PCM: SDP4430 Media 2011-06-09 9:42 ` Liam Girdwood @ 2011-06-09 17:45 ` hong zhang 2011-06-09 17:48 ` Liam Girdwood 0 siblings, 1 reply; 12+ messages in thread From: hong zhang @ 2011-06-09 17:45 UTC (permalink / raw) To: Liam Girdwood; +Cc: alsa-devel Liam, Arecord gets data from DMIC! Using following commands. "arecord -f dat -D plughw:0,0 dmic.wav" with "amixer cset numid=61 1 and amixer cset numid=60 2" to get data from DMIC after turning off two analog captures. Information from "arecrod -l" is not sync with ABE routing table. For example, "arecord -l" indicates hw:0,10 is DMIC capture but ABE diagram indicates plughw:0,0 can be used for DMIC input. Are "arecord -l" and "aplay -l" still useful? ---henry --- On Thu, 6/9/11, Liam Girdwood <lrg@ti.com> wrote: > From: Liam Girdwood <lrg@ti.com> > Subject: Re: [alsa-devel] asoc: no valid backend routes for PCM: SDP4430 Media > To: "hong zhang" <henryzhang62@yahoo.com> > Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org> > Date: Thursday, June 9, 2011, 4:42 AM > Hi Henry, > > On 08/06/11 20:08, hong zhang wrote: > > Liam, > > > > I have downloaded kernel tar ball. Three questions > need your help. > > > > 1. which defconfig should be used in > arch/arm/configs? > > I do not see OMAP4 for SDP4430 (blaze > board). Panda does not have DMIC > > only blaze has it. > > > > There is an omap2plus defconfig. > > > 2. On blaze board, I have to turn off two analog > captures and leave DMIC open. Can you verify my gst-launch > is correct? I cannot capture voice from DMIC on OMAP4 blaze > board us it. > > > > gst-launch-0.10 -v alsasrc > num-buffers=1000 ! > 'audio/x-raw-int,rate=8000,channels=1,endianness=1234,width=16,depth=16' > ! audioconvert ! wavenc! filesink > location=/home/normanc/Desktop/8000.wav > > > > 3. If I specify DMIC device, command is rejected. > > > > gst-launch-0.10 -v alsasrc device="hw:0,10" > num-buffers=1000 ! 'audio/x-raw-int, > rate=8000,channels=1,endianness=1234,width=16,depth=16' ! > audioconvert ! wavenc! filesink > location=/home/normanc/Desktop/8000.wav > > > > The easiest thing todo first is to get arecord working. Use > hw:0,1 for DMIC and make sure you use alsamixer to configure > the correct audio paths for DMIC to hw:0,1. > > > TI support team in France says item 2 should work for > DMIC. But I simply could not get it. TI team says item 2 > works for "official release 2.6.35-990-omap4 #9". > > > > I have spent 1 week on it with 2.6.35-990-omap4 #9 > > > > Please advise! > > > > It does look like you have not configured the audio route > here for the DMIC to hw:0,1. Use the ABE diagram to create > your route with alsamixer. > > Liam > > > Thanks. > > > > ---henry > > > > --- On Wed, 6/8/11, Liam Girdwood <lrg@ti.com> wrote: > > > >> From: Liam Girdwood <lrg@ti.com> > >> Subject: Re: [alsa-devel] asoc: no valid backend > routes for PCM: SDP4430 Media > >> To: "hong zhang" <henryzhang62@yahoo.com> > >> Cc: "alsa-devel@alsa-project.org" > <alsa-devel@alsa-project.org> > >> Date: Wednesday, June 8, 2011, 9:22 AM > >> On 07/06/11 20:59, hong zhang wrote: > >>> Liam, > >>> > >>> Actually, I could not prove DMIC on OMAP4 > blaze board > >> is working in both kernel 2.6.35 and 2.6.38 using > arecord > >> and gstreamer-alsa. > >>> > >>> In 2.6.35, arecord returns 44 bytes with read > error > >>> In 2.6.38, arecord collects native data. > >>> > >>> Gstreamer-alsa could not get voice after > turning off > >> analog captures using amixer. > >>> > >>> Any information regarding DMIC on OMAP4? I see > people > >> send DMIC patch to 2.6.38. > >>> > >> > >> DMIC works on OMAP4, can you try my branch :- > >> > >> https://gitorious.org/omap-audio/linux-audio/commits/lrg/topic/omap-asoc-next-3.1 > >> > >> Liam > >> > >> > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: asoc: no valid backend routes for PCM: SDP4430 Media 2011-06-09 17:45 ` hong zhang @ 2011-06-09 17:48 ` Liam Girdwood 2011-06-09 17:52 ` hong zhang 0 siblings, 1 reply; 12+ messages in thread From: Liam Girdwood @ 2011-06-09 17:48 UTC (permalink / raw) To: hong zhang; +Cc: alsa-devel On 09/06/11 18:45, hong zhang wrote: > Liam, > > Arecord gets data from DMIC! Using following commands. > > "arecord -f dat -D plughw:0,0 dmic.wav" with "amixer cset numid=61 1 and > amixer cset numid=60 2" to get data from DMIC after turning off two analog captures. > > Information from "arecrod -l" is not sync with ABE routing table. For example, "arecord -l" indicates hw:0,10 is DMIC capture but > ABE diagram indicates plughw:0,0 can be used for DMIC input. > > Are "arecord -l" and "aplay -l" still useful? Yes, but not for OMAP4 atm. Thanks Liam > > ---henry > > > --- On Thu, 6/9/11, Liam Girdwood <lrg@ti.com> wrote: > >> From: Liam Girdwood <lrg@ti.com> >> Subject: Re: [alsa-devel] asoc: no valid backend routes for PCM: SDP4430 Media >> To: "hong zhang" <henryzhang62@yahoo.com> >> Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org> >> Date: Thursday, June 9, 2011, 4:42 AM >> Hi Henry, >> >> On 08/06/11 20:08, hong zhang wrote: >>> Liam, >>> >>> I have downloaded kernel tar ball. Three questions >> need your help. >>> >>> 1. which defconfig should be used in >> arch/arm/configs? >>> I do not see OMAP4 for SDP4430 (blaze >> board). Panda does not have DMIC >>> only blaze has it. >>> >> >> There is an omap2plus defconfig. >> >>> 2. On blaze board, I have to turn off two analog >> captures and leave DMIC open. Can you verify my gst-launch >> is correct? I cannot capture voice from DMIC on OMAP4 blaze >> board us it. >>> >>> gst-launch-0.10 -v alsasrc >> num-buffers=1000 ! >> 'audio/x-raw-int,rate=8000,channels=1,endianness=1234,width=16,depth=16' >> ! audioconvert ! wavenc! filesink >> location=/home/normanc/Desktop/8000.wav >>> >>> 3. If I specify DMIC device, command is rejected. >>> >>> gst-launch-0.10 -v alsasrc device="hw:0,10" >> num-buffers=1000 ! 'audio/x-raw-int, >> rate=8000,channels=1,endianness=1234,width=16,depth=16' ! >> audioconvert ! wavenc! filesink >> location=/home/normanc/Desktop/8000.wav >>> >> >> The easiest thing todo first is to get arecord working. Use >> hw:0,1 for DMIC and make sure you use alsamixer to configure >> the correct audio paths for DMIC to hw:0,1. >> >>> TI support team in France says item 2 should work for >> DMIC. But I simply could not get it. TI team says item 2 >> works for "official release 2.6.35-990-omap4 #9". >>> >>> I have spent 1 week on it with 2.6.35-990-omap4 #9 >>> >>> Please advise! >>> >> >> It does look like you have not configured the audio route >> here for the DMIC to hw:0,1. Use the ABE diagram to create >> your route with alsamixer. >> >> Liam >> >>> Thanks. >>> >>> ---henry >>> >>> --- On Wed, 6/8/11, Liam Girdwood <lrg@ti.com> wrote: >>> >>>> From: Liam Girdwood <lrg@ti.com> >>>> Subject: Re: [alsa-devel] asoc: no valid backend >> routes for PCM: SDP4430 Media >>>> To: "hong zhang" <henryzhang62@yahoo.com> >>>> Cc: "alsa-devel@alsa-project.org" >> <alsa-devel@alsa-project.org> >>>> Date: Wednesday, June 8, 2011, 9:22 AM >>>> On 07/06/11 20:59, hong zhang wrote: >>>>> Liam, >>>>> >>>>> Actually, I could not prove DMIC on OMAP4 >> blaze board >>>> is working in both kernel 2.6.35 and 2.6.38 using >> arecord >>>> and gstreamer-alsa. >>>>> >>>>> In 2.6.35, arecord returns 44 bytes with read >> error >>>>> In 2.6.38, arecord collects native data. >>>>> >>>>> Gstreamer-alsa could not get voice after >> turning off >>>> analog captures using amixer. >>>>> >>>>> Any information regarding DMIC on OMAP4? I see >> people >>>> send DMIC patch to 2.6.38. >>>>> >>>> >>>> DMIC works on OMAP4, can you try my branch :- >>>> >>>> https://gitorious.org/omap-audio/linux-audio/commits/lrg/topic/omap-asoc-next-3.1 >>>> >>>> Liam >>>> >>>> >> >> _______________________________________________ >> Alsa-devel mailing list >> Alsa-devel@alsa-project.org >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel >> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: asoc: no valid backend routes for PCM: SDP4430 Media 2011-06-09 17:48 ` Liam Girdwood @ 2011-06-09 17:52 ` hong zhang 2011-08-19 7:53 ` asoc: no valid backend routes for PCM Sarika 0 siblings, 1 reply; 12+ messages in thread From: hong zhang @ 2011-06-09 17:52 UTC (permalink / raw) To: Liam Girdwood; +Cc: alsa-devel --- On Thu, 6/9/11, Liam Girdwood <lrg@ti.com> wrote: > From: Liam Girdwood <lrg@ti.com> > Subject: Re: [alsa-devel] asoc: no valid backend routes for PCM: SDP4430 Media > To: "hong zhang" <henryzhang62@yahoo.com> > Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org> > Date: Thursday, June 9, 2011, 12:48 PM > On 09/06/11 18:45, hong zhang wrote: > > Liam, > > > > Arecord gets data from DMIC! Using following > commands. > > > > "arecord -f dat -D plughw:0,0 dmic.wav" with "amixer > cset numid=61 1 and > > amixer cset numid=60 2" to get data from DMIC after > turning off two analog captures. > > > > Information from "arecrod -l" is not sync with ABE > routing table. For example, "arecord -l" indicates hw:0,10 > is DMIC capture but > > ABE diagram indicates plughw:0,0 can be used for DMIC > input. > > > > Are "arecord -l" and "aplay -l" still useful? > > Yes, but not for OMAP4 atm. 1. What is OMAP4 ATM? 2. Why "hw:0,10 DMIC capture" does not work for DMIC input? > Thanks > > Liam > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: asoc: no valid backend routes for PCM 2011-06-09 17:52 ` hong zhang @ 2011-08-19 7:53 ` Sarika 2011-08-19 16:20 ` Liam Girdwood 0 siblings, 1 reply; 12+ messages in thread From: Sarika @ 2011-08-19 7:53 UTC (permalink / raw) To: alsa-devel Hello, I am not able to hear audio on my headset when it connect it to panda board. What mite be the issue? Also panda does not has DMIC does this make any difference ? Regards Sarika ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: asoc: no valid backend routes for PCM 2011-08-19 7:53 ` asoc: no valid backend routes for PCM Sarika @ 2011-08-19 16:20 ` Liam Girdwood [not found] ` <CAHgabbYxe-mzwhxiivj5Xmqdq3FQuZ3ZFhgU4wy_bCosm2BhwA@mail.gmail.com> 0 siblings, 1 reply; 12+ messages in thread From: Liam Girdwood @ 2011-08-19 16:20 UTC (permalink / raw) To: Sarika; +Cc: alsa-devel On 19/08/11 08:53, Sarika wrote: > Hello, > I am not able to hear audio on my headset when it connect it to panda board. > What mite be the issue? This means you have no valid audio route from your pcm device to your headphone. Please use the supplied UCM configuration files (with Ubuntu) to set the route or use alsamixer to do this manually. http://www.omappedia.org/wiki/Audio_Drive_Arch > Also panda does not has DMIC does this make any difference ? > No. Liam > Regards > Sarika > > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 12+ messages in thread
[parent not found: <CAHgabbYxe-mzwhxiivj5Xmqdq3FQuZ3ZFhgU4wy_bCosm2BhwA@mail.gmail.com>]
* Re: asoc: no valid backend routes for PCM [not found] ` <CAHgabbYxe-mzwhxiivj5Xmqdq3FQuZ3ZFhgU4wy_bCosm2BhwA@mail.gmail.com> @ 2011-08-22 10:54 ` Liam Girdwood 0 siblings, 0 replies; 12+ messages in thread From: Liam Girdwood @ 2011-08-22 10:54 UTC (permalink / raw) To: sarika baby, alsa-devel Please don't drop the list from replies. On 22/08/11 06:38, sarika baby wrote: > Hello, > Thanks for your information, but can you tell that if i have to add the audio route should i have to do it at kernel drivers level or else at ALSA (mydroid level) ? > The routes are all configured in userspace with either UCM, alsamixer, amixer or by calling the alsa-lib C API. Liam > Thanks and Regards > Soujanya > > On Fri, Aug 19, 2011 at 9:50 PM, Liam Girdwood <lrg@ti.com <mailto:lrg@ti.com>> wrote: > > On 19/08/11 08:53, Sarika wrote: > > Hello, > > I am not able to hear audio on my headset when it connect it to panda board. > > What mite be the issue? > > This means you have no valid audio route from your pcm device to your headphone. > > Please use the supplied UCM configuration files (with Ubuntu) to set the route or use alsamixer to do this manually. > > http://www.omappedia.org/wiki/Audio_Drive_Arch > > > Also panda does not has DMIC does this make any difference ? > > > > No. > > Liam > > > Regards > > Sarika > > > > > > _______________________________________________ > > Alsa-devel mailing list > > Alsa-devel@alsa-project.org <mailto:Alsa-devel@alsa-project.org> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > > > > -- > SarikA > ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2011-08-22 10:54 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-07 0:13 asoc: no valid backend routes for PCM: SDP4430 Media hong zhang
2011-06-07 8:38 ` Liam Girdwood
2011-06-07 19:59 ` hong zhang
2011-06-08 14:22 ` Liam Girdwood
2011-06-08 19:08 ` hong zhang
2011-06-09 9:42 ` Liam Girdwood
2011-06-09 17:45 ` hong zhang
2011-06-09 17:48 ` Liam Girdwood
2011-06-09 17:52 ` hong zhang
2011-08-19 7:53 ` asoc: no valid backend routes for PCM Sarika
2011-08-19 16:20 ` Liam Girdwood
[not found] ` <CAHgabbYxe-mzwhxiivj5Xmqdq3FQuZ3ZFhgU4wy_bCosm2BhwA@mail.gmail.com>
2011-08-22 10:54 ` Liam Girdwood
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.