* [Qemu-devel] [PATCH 00/12] [uq/master] Import linux headers and some cleanups
@ 2011-06-08 14:10 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti
Cc: Peter Maydell, Eduardo Habkost, kvm, qemu-devel, Alexander Graf,
Andreas Färber, Christoph Hellwig
Licensing of the virtio headers is no clarified. So we can finally
resolve the clumbsy and constantly buggy #ifdef'ery around old KVM and
virtio headers. Recent example: current qemu-kvm does not build against
2.6.32 headers.
This series introduces an import mechanism for all required Linux
headers so that the appropriate versions can be kept safely inside the
QEMU tree. I've incorporated all the valuable review comments on the
first version and rebased the result over current uq/master after
rebasing that one over current QEMU master.
Please note that I had no chance to test-build PPC or s390.
Beside the header topic, this series also includes a few assorted KVM
cleanup patches so that my queue is empty again.
CC: Alexander Graf <agraf@suse.de>
CC: Andreas Färber <andreas.faerber@web.de>
CC: Christoph Hellwig <hch@lst.de>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Jan Kiszka (12):
Add kernel header update script
Import kernel headers
Switch build system to accompanied kernel headers
kvm: Drop CONFIG_KVM_PARA
kvm: ppc: Drop CONFIG_KVM_PPC_PVR
kvm: Drop useless zero-initializations
kvm: Drop KVM_CAP build dependencies
kvm: x86: Drop KVM_CAP build dependencies
kvm: ppc: Drop KVM_CAP build dependencies
kvm: Clean up stubs
kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
Remove unneeded kvm.h from cpu-exec.c
Makefile.target | 4 +-
configure | 149 +------
cpu-exec.c | 1 -
hw/kvmclock.c | 9 -
kvm-all.c | 13 -
kvm-stub.c | 18 +-
kvm.h | 2 +-
linux-headers/COPYING | 356 +++++++++++++++
linux-headers/README | 2 +
linux-headers/asm-powerpc/kvm.h | 275 ++++++++++++
linux-headers/asm-powerpc/kvm_para.h | 53 +++
linux-headers/asm-s390/kvm.h | 44 ++
linux-headers/asm-s390/kvm_para.h | 17 +
linux-headers/asm-x86/hyperv.h | 193 ++++++++
linux-headers/asm-x86/kvm.h | 324 ++++++++++++++
linux-headers/asm-x86/kvm_para.h | 79 ++++
linux-headers/linux/kvm.h | 804 ++++++++++++++++++++++++++++++++++
linux-headers/linux/kvm_para.h | 29 ++
linux-headers/linux/vhost.h | 130 ++++++
linux-headers/linux/virtio_config.h | 54 +++
linux-headers/linux/virtio_ring.h | 163 +++++++
scripts/update-linux-headers.sh | 55 +++
target-i386/cpuid.c | 20 +-
target-i386/kvm.c | 123 +-----
target-ppc/kvm.c | 23 -
target-s390x/cpu.h | 10 -
target-s390x/op_helper.c | 1 +
27 files changed, 2630 insertions(+), 321 deletions(-)
create mode 100644 linux-headers/COPYING
create mode 100644 linux-headers/README
create mode 100644 linux-headers/asm-powerpc/kvm.h
create mode 100644 linux-headers/asm-powerpc/kvm_para.h
create mode 100644 linux-headers/asm-s390/kvm.h
create mode 100644 linux-headers/asm-s390/kvm_para.h
create mode 100644 linux-headers/asm-x86/hyperv.h
create mode 100644 linux-headers/asm-x86/kvm.h
create mode 100644 linux-headers/asm-x86/kvm_para.h
create mode 100644 linux-headers/linux/kvm.h
create mode 100644 linux-headers/linux/kvm_para.h
create mode 100644 linux-headers/linux/vhost.h
create mode 100644 linux-headers/linux/virtio_config.h
create mode 100644 linux-headers/linux/virtio_ring.h
create mode 100755 scripts/update-linux-headers.sh
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 01/12] Add kernel header update script
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:10 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti
Cc: kvm, qemu-devel, Alexander Graf, Christoph Hellwig,
Peter Maydell, Andreas Färber
This helper pulls the required kernel headers for KVM and vhost into a
specified directory. The update is triggered via
scripts/update-linux-headers.sh LINUX_PATH
and will place the output under linux-headers/linux and linux-headers/asm-*.
It also imports the COPYING to care for headers without an explicit license.
CC: Alexander Graf <agraf@suse.de>
CC: Christoph Hellwig <hch@lst.de>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
| 2 +
| 55 +++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 0 deletions(-)
create mode 100644 linux-headers/README
create mode 100755 scripts/update-linux-headers.sh
--git a/linux-headers/README b/linux-headers/README
new file mode 100644
index 0000000..5c9026b
--- /dev/null
+++ b/linux-headers/README
@@ -0,0 +1,2 @@
+Automatically imported Linux kernel headers.
+Only use scripts/update-linux-headers.sh to update!
--git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
new file mode 100755
index 0000000..e5f45b2
--- /dev/null
+++ b/scripts/update-linux-headers.sh
@@ -0,0 +1,55 @@
+#!/bin/sh -e
+#
+# Update Linux kernel headers QEMU requires from a specified kernel tree.
+#
+# Copyright (C) 2011 Siemens AG
+#
+# Authors:
+# Jan Kiszka <jan.kiszka@siemens.com>
+#
+# This work is licensed under the terms of the GNU GPL version 2.
+# See the COPYING file in the top-level directory.
+
+tmpdir=$TMPDIR/.tmp-hdrs-$$
+linux=$1
+output=$2
+
+if [ -z "$linux" -o ! -d "$linux" ]; then
+ cat << EOF
+usage: update-kernel-headers.sh LINUX_PATH [OUTPUT_PATH]
+
+LINUX_PATH Linux kernel directory to obtain the headers from
+OUTPUT_PATH output directory, usually the qemu source tree (default: $PWD)
+EOF
+ exit 1
+fi
+
+if [ -z "$output" ]; then
+ output=$PWD
+fi
+
+for arch in x86 powerpc s390; do
+ make -C $linux INSTALL_HDR_PATH=$tmpdir SRCARCH=$arch headers_install
+
+ rm -rf $output/linux-headers/asm-$arch
+ mkdir -p $output/linux-headers/asm-$arch
+ for header in kvm.h kvm_para.h; do
+ cp $tmpdir/include/asm/$header $output/linux-headers/asm-$arch
+ done
+ if [ $arch == x86 ]; then
+ cp $tmpdir/include/asm/hyperv.h $output/linux-headers/asm-x86
+ fi
+done
+
+rm -rf $output/linux-headers/linux
+mkdir -p $output/linux-headers/linux
+for header in kvm.h kvm_para.h vhost.h virtio_config.h virtio_ring.h; do
+ cp $tmpdir/include/linux/$header $output/linux-headers/linux
+done
+if [ -L $linux/source ]; then
+ cp $linux/source/COPYING $output/linux-headers
+else
+ cp $linux/COPYING $output/linux-headers
+fi
+
+rm -rf $tmpdir
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 01/12] Add kernel header update script
@ 2011-06-08 14:10 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti
Cc: Peter Maydell, kvm, qemu-devel, Alexander Graf,
Andreas Färber, Christoph Hellwig
This helper pulls the required kernel headers for KVM and vhost into a
specified directory. The update is triggered via
scripts/update-linux-headers.sh LINUX_PATH
and will place the output under linux-headers/linux and linux-headers/asm-*.
It also imports the COPYING to care for headers without an explicit license.
CC: Alexander Graf <agraf@suse.de>
CC: Christoph Hellwig <hch@lst.de>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
| 2 +
| 55 +++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 0 deletions(-)
create mode 100644 linux-headers/README
create mode 100755 scripts/update-linux-headers.sh
--git a/linux-headers/README b/linux-headers/README
new file mode 100644
index 0000000..5c9026b
--- /dev/null
+++ b/linux-headers/README
@@ -0,0 +1,2 @@
+Automatically imported Linux kernel headers.
+Only use scripts/update-linux-headers.sh to update!
--git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
new file mode 100755
index 0000000..e5f45b2
--- /dev/null
+++ b/scripts/update-linux-headers.sh
@@ -0,0 +1,55 @@
+#!/bin/sh -e
+#
+# Update Linux kernel headers QEMU requires from a specified kernel tree.
+#
+# Copyright (C) 2011 Siemens AG
+#
+# Authors:
+# Jan Kiszka <jan.kiszka@siemens.com>
+#
+# This work is licensed under the terms of the GNU GPL version 2.
+# See the COPYING file in the top-level directory.
+
+tmpdir=$TMPDIR/.tmp-hdrs-$$
+linux=$1
+output=$2
+
+if [ -z "$linux" -o ! -d "$linux" ]; then
+ cat << EOF
+usage: update-kernel-headers.sh LINUX_PATH [OUTPUT_PATH]
+
+LINUX_PATH Linux kernel directory to obtain the headers from
+OUTPUT_PATH output directory, usually the qemu source tree (default: $PWD)
+EOF
+ exit 1
+fi
+
+if [ -z "$output" ]; then
+ output=$PWD
+fi
+
+for arch in x86 powerpc s390; do
+ make -C $linux INSTALL_HDR_PATH=$tmpdir SRCARCH=$arch headers_install
+
+ rm -rf $output/linux-headers/asm-$arch
+ mkdir -p $output/linux-headers/asm-$arch
+ for header in kvm.h kvm_para.h; do
+ cp $tmpdir/include/asm/$header $output/linux-headers/asm-$arch
+ done
+ if [ $arch == x86 ]; then
+ cp $tmpdir/include/asm/hyperv.h $output/linux-headers/asm-x86
+ fi
+done
+
+rm -rf $output/linux-headers/linux
+mkdir -p $output/linux-headers/linux
+for header in kvm.h kvm_para.h vhost.h virtio_config.h virtio_ring.h; do
+ cp $tmpdir/include/linux/$header $output/linux-headers/linux
+done
+if [ -L $linux/source ]; then
+ cp $linux/source/COPYING $output/linux-headers
+else
+ cp $linux/COPYING $output/linux-headers
+fi
+
+rm -rf $tmpdir
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [PATCH 01/12] Add kernel header update script
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:33 ` Peter Maydell
-1 siblings, 0 replies; 90+ messages in thread
From: Peter Maydell @ 2011-06-08 14:33 UTC (permalink / raw)
To: Jan Kiszka
Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel, Alexander Graf,
Christoph Hellwig, Andreas Färber
On 8 June 2011 15:10, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> --- /dev/null
> +++ b/scripts/update-linux-headers.sh
> @@ -0,0 +1,55 @@
> +#!/bin/sh -e
> +#
> +if [ -z "$output" ]; then
> + output=$PWD
> +fi
> + mkdir -p $output/linux-headers/asm-$arch
This script is rather lacking in quoting throughout. As a random
example, this looks like it will break if you run the script from
a directory with a space in the path.
> +tmpdir=$TMPDIR/.tmp-hdrs-$$
Better (safer) to use mktemp, I think.
> if [ -z "$linux" -o ! -d "$linux" ]; then
test -o is obsolescent in POSIX; use
if [ -z "$linux" ] || ! [ -d "$linux" ] ; then
instead.
-- PMM
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 01/12] Add kernel header update script
@ 2011-06-08 14:33 ` Peter Maydell
0 siblings, 0 replies; 90+ messages in thread
From: Peter Maydell @ 2011-06-08 14:33 UTC (permalink / raw)
To: Jan Kiszka
Cc: kvm, Marcelo Tosatti, Alexander Graf, qemu-devel,
Andreas Färber, Avi Kivity, Christoph Hellwig
On 8 June 2011 15:10, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> --- /dev/null
> +++ b/scripts/update-linux-headers.sh
> @@ -0,0 +1,55 @@
> +#!/bin/sh -e
> +#
> +if [ -z "$output" ]; then
> + output=$PWD
> +fi
> + mkdir -p $output/linux-headers/asm-$arch
This script is rather lacking in quoting throughout. As a random
example, this looks like it will break if you run the script from
a directory with a space in the path.
> +tmpdir=$TMPDIR/.tmp-hdrs-$$
Better (safer) to use mktemp, I think.
> if [ -z "$linux" -o ! -d "$linux" ]; then
test -o is obsolescent in POSIX; use
if [ -z "$linux" ] || ! [ -d "$linux" ] ; then
instead.
-- PMM
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [PATCH 01/12] Add kernel header update script
2011-06-08 14:33 ` [Qemu-devel] " Peter Maydell
@ 2011-06-08 14:39 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:39 UTC (permalink / raw)
To: Peter Maydell
Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel, Alexander Graf,
Christoph Hellwig, Andreas Färber
On 2011-06-08 16:33, Peter Maydell wrote:
> On 8 June 2011 15:10, Jan Kiszka <jan.kiszka@siemens.com> wrote:
>> --- /dev/null
>> +++ b/scripts/update-linux-headers.sh
>> @@ -0,0 +1,55 @@
>> +#!/bin/sh -e
>> +#
>
>> +if [ -z "$output" ]; then
>> + output=$PWD
>> +fi
>
>> + mkdir -p $output/linux-headers/asm-$arch
>
> This script is rather lacking in quoting throughout. As a random
> example, this looks like it will break if you run the script from
> a directory with a space in the path.
True.
>
>> +tmpdir=$TMPDIR/.tmp-hdrs-$$
>
> Better (safer) to use mktemp, I think.
Is that portable? I don't think so.
>
>> if [ -z "$linux" -o ! -d "$linux" ]; then
>
> test -o is obsolescent in POSIX; use
> if [ -z "$linux" ] || ! [ -d "$linux" ] ; then
> instead.
>
OK.
Thanks,
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 01/12] Add kernel header update script
@ 2011-06-08 14:39 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:39 UTC (permalink / raw)
To: Peter Maydell
Cc: kvm, Marcelo Tosatti, Alexander Graf, qemu-devel,
Andreas Färber, Avi Kivity, Christoph Hellwig
On 2011-06-08 16:33, Peter Maydell wrote:
> On 8 June 2011 15:10, Jan Kiszka <jan.kiszka@siemens.com> wrote:
>> --- /dev/null
>> +++ b/scripts/update-linux-headers.sh
>> @@ -0,0 +1,55 @@
>> +#!/bin/sh -e
>> +#
>
>> +if [ -z "$output" ]; then
>> + output=$PWD
>> +fi
>
>> + mkdir -p $output/linux-headers/asm-$arch
>
> This script is rather lacking in quoting throughout. As a random
> example, this looks like it will break if you run the script from
> a directory with a space in the path.
True.
>
>> +tmpdir=$TMPDIR/.tmp-hdrs-$$
>
> Better (safer) to use mktemp, I think.
Is that portable? I don't think so.
>
>> if [ -z "$linux" -o ! -d "$linux" ]; then
>
> test -o is obsolescent in POSIX; use
> if [ -z "$linux" ] || ! [ -d "$linux" ] ; then
> instead.
>
OK.
Thanks,
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [PATCH 01/12] Add kernel header update script
2011-06-08 14:39 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:51 ` Peter Maydell
-1 siblings, 0 replies; 90+ messages in thread
From: Peter Maydell @ 2011-06-08 14:51 UTC (permalink / raw)
To: Jan Kiszka
Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel, Alexander Graf,
Christoph Hellwig, Andreas Färber
2011/6/8 Jan Kiszka <jan.kiszka@siemens.com>:
> On 2011-06-08 16:33, Peter Maydell wrote:
>> On 8 June 2011 15:10, Jan Kiszka <jan.kiszka@siemens.com> wrote:
>>> +tmpdir=$TMPDIR/.tmp-hdrs-$$
>>
>> Better (safer) to use mktemp, I think.
>
> Is that portable? I don't think so.
We don't expect every random end user to run this script, though,
right? We already use mktemp in scripts/refresh-pxe-roms.sh, for
instance.
-- PMM
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 01/12] Add kernel header update script
@ 2011-06-08 14:51 ` Peter Maydell
0 siblings, 0 replies; 90+ messages in thread
From: Peter Maydell @ 2011-06-08 14:51 UTC (permalink / raw)
To: Jan Kiszka
Cc: kvm, Marcelo Tosatti, Alexander Graf, qemu-devel,
Andreas Färber, Avi Kivity, Christoph Hellwig
2011/6/8 Jan Kiszka <jan.kiszka@siemens.com>:
> On 2011-06-08 16:33, Peter Maydell wrote:
>> On 8 June 2011 15:10, Jan Kiszka <jan.kiszka@siemens.com> wrote:
>>> +tmpdir=$TMPDIR/.tmp-hdrs-$$
>>
>> Better (safer) to use mktemp, I think.
>
> Is that portable? I don't think so.
We don't expect every random end user to run this script, though,
right? We already use mktemp in scripts/refresh-pxe-roms.sh, for
instance.
-- PMM
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH v2 01/12] Add kernel header update script
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 15:06 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 15:06 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti
Cc: kvm, qemu-devel, Alexander Graf, Christoph Hellwig,
Peter Maydell, Andreas Färber
This helper pulls the required kernel headers for KVM and vhost into a
specified directory. The update is triggered via
scripts/update-linux-headers.sh LINUX_PATH
and will place the output under linux-headers/linux and linux-headers/asm-*.
It also imports the COPYING to care for headers without an explicit license.
CC: Alexander Graf <agraf@suse.de>
CC: Christoph Hellwig <hch@lst.de>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
Changes in v2:
- add quoting
- use mktemp
- avoid -o for test
| 2 +
| 55 +++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 0 deletions(-)
create mode 100644 linux-headers/README
create mode 100755 scripts/update-linux-headers.sh
--git a/linux-headers/README b/linux-headers/README
new file mode 100644
index 0000000..5c9026b
--- /dev/null
+++ b/linux-headers/README
@@ -0,0 +1,2 @@
+Automatically imported Linux kernel headers.
+Only use scripts/update-linux-headers.sh to update!
--git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
new file mode 100755
index 0000000..e43f385
--- /dev/null
+++ b/scripts/update-linux-headers.sh
@@ -0,0 +1,55 @@
+#!/bin/sh -e
+#
+# Update Linux kernel headers QEMU requires from a specified kernel tree.
+#
+# Copyright (C) 2011 Siemens AG
+#
+# Authors:
+# Jan Kiszka <jan.kiszka@siemens.com>
+#
+# This work is licensed under the terms of the GNU GPL version 2.
+# See the COPYING file in the top-level directory.
+
+tmpdir=`mktemp -d`
+linux="$1"
+output="$2"
+
+if [ -z "$linux" ] || ! [ -d "$linux" ]; then
+ cat << EOF
+usage: update-kernel-headers.sh LINUX_PATH [OUTPUT_PATH]
+
+LINUX_PATH Linux kernel directory to obtain the headers from
+OUTPUT_PATH output directory, usually the qemu source tree (default: $PWD)
+EOF
+ exit 1
+fi
+
+if [ -z "$output" ]; then
+ output="$PWD"
+fi
+
+for arch in x86 powerpc s390; do
+ make -C "$linux" INSTALL_HDR_PATH="$tmpdir" SRCARCH=$arch headers_install
+
+ rm -rf "$output/linux-headers/asm-$arch"
+ mkdir -p "$output/linux-headers/asm-$arch"
+ for header in kvm.h kvm_para.h; do
+ cp "$tmpdir/include/asm/$header" "$output/linux-headers/asm-$arch"
+ done
+ if [ $arch == x86 ]; then
+ cp "$tmpdir/include/asm/hyperv.h" "$output/linux-headers/asm-x86"
+ fi
+done
+
+rm -rf "$output/linux-headers/linux"
+mkdir -p "$output/linux-headers/linux"
+for header in kvm.h kvm_para.h vhost.h virtio_config.h virtio_ring.h; do
+ cp "$tmpdir/include/linux/$header" "$output/linux-headers/linux"
+done
+if [ -L "$linux/source" ]; then
+ cp "$linux/source/COPYING" "$output/linux-headers"
+else
+ cp "$linux/COPYING" "$output/linux-headers"
+fi
+
+rm -rf "$tmpdir"
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH v2 01/12] Add kernel header update script
@ 2011-06-08 15:06 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 15:06 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti
Cc: Peter Maydell, kvm, qemu-devel, Alexander Graf,
Andreas Färber, Christoph Hellwig
This helper pulls the required kernel headers for KVM and vhost into a
specified directory. The update is triggered via
scripts/update-linux-headers.sh LINUX_PATH
and will place the output under linux-headers/linux and linux-headers/asm-*.
It also imports the COPYING to care for headers without an explicit license.
CC: Alexander Graf <agraf@suse.de>
CC: Christoph Hellwig <hch@lst.de>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
Changes in v2:
- add quoting
- use mktemp
- avoid -o for test
| 2 +
| 55 +++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 0 deletions(-)
create mode 100644 linux-headers/README
create mode 100755 scripts/update-linux-headers.sh
--git a/linux-headers/README b/linux-headers/README
new file mode 100644
index 0000000..5c9026b
--- /dev/null
+++ b/linux-headers/README
@@ -0,0 +1,2 @@
+Automatically imported Linux kernel headers.
+Only use scripts/update-linux-headers.sh to update!
--git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
new file mode 100755
index 0000000..e43f385
--- /dev/null
+++ b/scripts/update-linux-headers.sh
@@ -0,0 +1,55 @@
+#!/bin/sh -e
+#
+# Update Linux kernel headers QEMU requires from a specified kernel tree.
+#
+# Copyright (C) 2011 Siemens AG
+#
+# Authors:
+# Jan Kiszka <jan.kiszka@siemens.com>
+#
+# This work is licensed under the terms of the GNU GPL version 2.
+# See the COPYING file in the top-level directory.
+
+tmpdir=`mktemp -d`
+linux="$1"
+output="$2"
+
+if [ -z "$linux" ] || ! [ -d "$linux" ]; then
+ cat << EOF
+usage: update-kernel-headers.sh LINUX_PATH [OUTPUT_PATH]
+
+LINUX_PATH Linux kernel directory to obtain the headers from
+OUTPUT_PATH output directory, usually the qemu source tree (default: $PWD)
+EOF
+ exit 1
+fi
+
+if [ -z "$output" ]; then
+ output="$PWD"
+fi
+
+for arch in x86 powerpc s390; do
+ make -C "$linux" INSTALL_HDR_PATH="$tmpdir" SRCARCH=$arch headers_install
+
+ rm -rf "$output/linux-headers/asm-$arch"
+ mkdir -p "$output/linux-headers/asm-$arch"
+ for header in kvm.h kvm_para.h; do
+ cp "$tmpdir/include/asm/$header" "$output/linux-headers/asm-$arch"
+ done
+ if [ $arch == x86 ]; then
+ cp "$tmpdir/include/asm/hyperv.h" "$output/linux-headers/asm-x86"
+ fi
+done
+
+rm -rf "$output/linux-headers/linux"
+mkdir -p "$output/linux-headers/linux"
+for header in kvm.h kvm_para.h vhost.h virtio_config.h virtio_ring.h; do
+ cp "$tmpdir/include/linux/$header" "$output/linux-headers/linux"
+done
+if [ -L "$linux/source" ]; then
+ cp "$linux/source/COPYING" "$output/linux-headers"
+else
+ cp "$linux/COPYING" "$output/linux-headers"
+fi
+
+rm -rf "$tmpdir"
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [PATCH v2 01/12] Add kernel header update script
2011-06-08 15:06 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 15:57 ` Peter Maydell
-1 siblings, 0 replies; 90+ messages in thread
From: Peter Maydell @ 2011-06-08 15:57 UTC (permalink / raw)
To: Jan Kiszka
Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel, Alexander Graf,
Christoph Hellwig, Andreas Färber
On 8 June 2011 16:06, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> + if [ $arch == x86 ]; then
This should be a single '=' -- '==' is a bashism. The 'checkbashisms'
script (available in 'devscripts' package on debian and ubuntu)
catches this:
cam-vm-266:maverick:testing$ checkbashisms scripts/update-linux-headers.sh
possible bashism in
/home/petmay01/linaro/qemu-from-laptop/qemu/scripts/update-linux-headers.sh
line 39 (should be 'b = a'):
if [ $arch == x86 ]; then
Otherwise looks good.
-- PMM
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH v2 01/12] Add kernel header update script
@ 2011-06-08 15:57 ` Peter Maydell
0 siblings, 0 replies; 90+ messages in thread
From: Peter Maydell @ 2011-06-08 15:57 UTC (permalink / raw)
To: Jan Kiszka
Cc: kvm, Marcelo Tosatti, Alexander Graf, qemu-devel,
Andreas Färber, Avi Kivity, Christoph Hellwig
On 8 June 2011 16:06, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> + if [ $arch == x86 ]; then
This should be a single '=' -- '==' is a bashism. The 'checkbashisms'
script (available in 'devscripts' package on debian and ubuntu)
catches this:
cam-vm-266:maverick:testing$ checkbashisms scripts/update-linux-headers.sh
possible bashism in
/home/petmay01/linaro/qemu-from-laptop/qemu/scripts/update-linux-headers.sh
line 39 (should be 'b = a'):
if [ $arch == x86 ]; then
Otherwise looks good.
-- PMM
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH v3 01/12] Add kernel header update script
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 16:22 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 16:22 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti
Cc: kvm, qemu-devel, Alexander Graf, Christoph Hellwig,
Peter Maydell, Andreas Färber
This helper pulls the required kernel headers for KVM and vhost into a
specified directory. The update is triggered via
scripts/update-linux-headers.sh LINUX_PATH
and will place the output under linux-headers/linux and linux-headers/asm-*.
It also imports the COPYING to care for headers without an explicit license.
CC: Alexander Graf <agraf@suse.de>
CC: Christoph Hellwig <hch@lst.de>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
Changes in v3:
- remove bashism
Changes in v2:
- add quoting
- use mktemp
- avoid -o for test
| 2 +
| 55 +++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 0 deletions(-)
create mode 100644 linux-headers/README
create mode 100755 scripts/update-linux-headers.sh
--git a/linux-headers/README b/linux-headers/README
new file mode 100644
index 0000000..5c9026b
--- /dev/null
+++ b/linux-headers/README
@@ -0,0 +1,2 @@
+Automatically imported Linux kernel headers.
+Only use scripts/update-linux-headers.sh to update!
--git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
new file mode 100755
index 0000000..9d2a4bc
--- /dev/null
+++ b/scripts/update-linux-headers.sh
@@ -0,0 +1,55 @@
+#!/bin/sh -e
+#
+# Update Linux kernel headers QEMU requires from a specified kernel tree.
+#
+# Copyright (C) 2011 Siemens AG
+#
+# Authors:
+# Jan Kiszka <jan.kiszka@siemens.com>
+#
+# This work is licensed under the terms of the GNU GPL version 2.
+# See the COPYING file in the top-level directory.
+
+tmpdir=`mktemp -d`
+linux="$1"
+output="$2"
+
+if [ -z "$linux" ] || ! [ -d "$linux" ]; then
+ cat << EOF
+usage: update-kernel-headers.sh LINUX_PATH [OUTPUT_PATH]
+
+LINUX_PATH Linux kernel directory to obtain the headers from
+OUTPUT_PATH output directory, usually the qemu source tree (default: $PWD)
+EOF
+ exit 1
+fi
+
+if [ -z "$output" ]; then
+ output="$PWD"
+fi
+
+for arch in x86 powerpc s390; do
+ make -C "$linux" INSTALL_HDR_PATH="$tmpdir" SRCARCH=$arch headers_install
+
+ rm -rf "$output/linux-headers/asm-$arch"
+ mkdir -p "$output/linux-headers/asm-$arch"
+ for header in kvm.h kvm_para.h; do
+ cp "$tmpdir/include/asm/$header" "$output/linux-headers/asm-$arch"
+ done
+ if [ $arch = x86 ]; then
+ cp "$tmpdir/include/asm/hyperv.h" "$output/linux-headers/asm-x86"
+ fi
+done
+
+rm -rf "$output/linux-headers/linux"
+mkdir -p "$output/linux-headers/linux"
+for header in kvm.h kvm_para.h vhost.h virtio_config.h virtio_ring.h; do
+ cp "$tmpdir/include/linux/$header" "$output/linux-headers/linux"
+done
+if [ -L "$linux/source" ]; then
+ cp "$linux/source/COPYING" "$output/linux-headers"
+else
+ cp "$linux/COPYING" "$output/linux-headers"
+fi
+
+rm -rf "$tmpdir"
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH v3 01/12] Add kernel header update script
@ 2011-06-08 16:22 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 16:22 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti
Cc: Peter Maydell, kvm, qemu-devel, Alexander Graf,
Andreas Färber, Christoph Hellwig
This helper pulls the required kernel headers for KVM and vhost into a
specified directory. The update is triggered via
scripts/update-linux-headers.sh LINUX_PATH
and will place the output under linux-headers/linux and linux-headers/asm-*.
It also imports the COPYING to care for headers without an explicit license.
CC: Alexander Graf <agraf@suse.de>
CC: Christoph Hellwig <hch@lst.de>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
Changes in v3:
- remove bashism
Changes in v2:
- add quoting
- use mktemp
- avoid -o for test
| 2 +
| 55 +++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 0 deletions(-)
create mode 100644 linux-headers/README
create mode 100755 scripts/update-linux-headers.sh
--git a/linux-headers/README b/linux-headers/README
new file mode 100644
index 0000000..5c9026b
--- /dev/null
+++ b/linux-headers/README
@@ -0,0 +1,2 @@
+Automatically imported Linux kernel headers.
+Only use scripts/update-linux-headers.sh to update!
--git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh
new file mode 100755
index 0000000..9d2a4bc
--- /dev/null
+++ b/scripts/update-linux-headers.sh
@@ -0,0 +1,55 @@
+#!/bin/sh -e
+#
+# Update Linux kernel headers QEMU requires from a specified kernel tree.
+#
+# Copyright (C) 2011 Siemens AG
+#
+# Authors:
+# Jan Kiszka <jan.kiszka@siemens.com>
+#
+# This work is licensed under the terms of the GNU GPL version 2.
+# See the COPYING file in the top-level directory.
+
+tmpdir=`mktemp -d`
+linux="$1"
+output="$2"
+
+if [ -z "$linux" ] || ! [ -d "$linux" ]; then
+ cat << EOF
+usage: update-kernel-headers.sh LINUX_PATH [OUTPUT_PATH]
+
+LINUX_PATH Linux kernel directory to obtain the headers from
+OUTPUT_PATH output directory, usually the qemu source tree (default: $PWD)
+EOF
+ exit 1
+fi
+
+if [ -z "$output" ]; then
+ output="$PWD"
+fi
+
+for arch in x86 powerpc s390; do
+ make -C "$linux" INSTALL_HDR_PATH="$tmpdir" SRCARCH=$arch headers_install
+
+ rm -rf "$output/linux-headers/asm-$arch"
+ mkdir -p "$output/linux-headers/asm-$arch"
+ for header in kvm.h kvm_para.h; do
+ cp "$tmpdir/include/asm/$header" "$output/linux-headers/asm-$arch"
+ done
+ if [ $arch = x86 ]; then
+ cp "$tmpdir/include/asm/hyperv.h" "$output/linux-headers/asm-x86"
+ fi
+done
+
+rm -rf "$output/linux-headers/linux"
+mkdir -p "$output/linux-headers/linux"
+for header in kvm.h kvm_para.h vhost.h virtio_config.h virtio_ring.h; do
+ cp "$tmpdir/include/linux/$header" "$output/linux-headers/linux"
+done
+if [ -L "$linux/source" ]; then
+ cp "$linux/source/COPYING" "$output/linux-headers"
+else
+ cp "$linux/COPYING" "$output/linux-headers"
+fi
+
+rm -rf "$tmpdir"
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [PATCH v3 01/12] Add kernel header update script
2011-06-08 16:22 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 17:30 ` Peter Maydell
-1 siblings, 0 replies; 90+ messages in thread
From: Peter Maydell @ 2011-06-08 17:30 UTC (permalink / raw)
To: Jan Kiszka
Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel, Alexander Graf,
Christoph Hellwig, Andreas Färber
On 8 June 2011 17:22, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> This helper pulls the required kernel headers for KVM and vhost into a
> specified directory. The update is triggered via
>
> scripts/update-linux-headers.sh LINUX_PATH
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
>
> Changes in v3:
> - remove bashism
Thanks; can't see any problems in this version.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
-- PMM
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH v3 01/12] Add kernel header update script
@ 2011-06-08 17:30 ` Peter Maydell
0 siblings, 0 replies; 90+ messages in thread
From: Peter Maydell @ 2011-06-08 17:30 UTC (permalink / raw)
To: Jan Kiszka
Cc: kvm, Marcelo Tosatti, Alexander Graf, qemu-devel,
Andreas Färber, Avi Kivity, Christoph Hellwig
On 8 June 2011 17:22, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> This helper pulls the required kernel headers for KVM and vhost into a
> specified directory. The update is triggered via
>
> scripts/update-linux-headers.sh LINUX_PATH
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
>
> Changes in v3:
> - remove bashism
Thanks; can't see any problems in this version.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
-- PMM
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 02/12] Import kernel headers
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:10 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel, Alexander Graf
These kernel headers and the COPYING file were automatically imported
from current Linux git, cb0a02ecf9 (post 3.0-rc2).
Licensing:
asm-powerpc GPLv2
asm-s390 GPLv2
asm-x86 Linux top-level license (GPLv2 with exception)
linux/kvm*: Linux top-level license (GPLv2 with exception)
linux/vhost: Linux top-level license (GPLv2 with exception)
linux/virtio*: 3-clause BSB
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
| 356 +++++++++++++++
| 275 ++++++++++++
| 53 +++
| 44 ++
| 17 +
| 193 ++++++++
| 324 ++++++++++++++
| 79 ++++
| 804 ++++++++++++++++++++++++++++++++++
| 29 ++
| 130 ++++++
| 54 +++
| 163 +++++++
13 files changed, 2521 insertions(+), 0 deletions(-)
create mode 100644 linux-headers/COPYING
create mode 100644 linux-headers/asm-powerpc/kvm.h
create mode 100644 linux-headers/asm-powerpc/kvm_para.h
create mode 100644 linux-headers/asm-s390/kvm.h
create mode 100644 linux-headers/asm-s390/kvm_para.h
create mode 100644 linux-headers/asm-x86/hyperv.h
create mode 100644 linux-headers/asm-x86/kvm.h
create mode 100644 linux-headers/asm-x86/kvm_para.h
create mode 100644 linux-headers/linux/kvm.h
create mode 100644 linux-headers/linux/kvm_para.h
create mode 100644 linux-headers/linux/vhost.h
create mode 100644 linux-headers/linux/virtio_config.h
create mode 100644 linux-headers/linux/virtio_ring.h
--git a/linux-headers/COPYING b/linux-headers/COPYING
new file mode 100644
index 0000000..ca442d3
--- /dev/null
+++ b/linux-headers/COPYING
@@ -0,0 +1,356 @@
+
+ NOTE! This copyright does *not* cover user programs that use kernel
+ services by normal system calls - this is merely considered normal use
+ of the kernel, and does *not* fall under the heading of "derived work".
+ Also note that the GPL below is copyrighted by the Free Software
+ Foundation, but the instance of code that it refers to (the Linux
+ kernel) is copyrighted by me and others who actually wrote it.
+
+ Also note that the only valid version of the GPL as far as the kernel
+ is concerned is _this_ particular version of the license (ie v2, not
+ v2.2 or v3.x or whatever), unless explicitly otherwise stated.
+
+ Linus Torvalds
+
+----------------------------------------
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+\f
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+\f
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+\f
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+\f
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
--git a/linux-headers/asm-powerpc/kvm.h b/linux-headers/asm-powerpc/kvm.h
new file mode 100644
index 0000000..d2ca5ed
--- /dev/null
+++ b/linux-headers/asm-powerpc/kvm.h
@@ -0,0 +1,275 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __LINUX_KVM_POWERPC_H
+#define __LINUX_KVM_POWERPC_H
+
+#include <linux/types.h>
+
+struct kvm_regs {
+ __u64 pc;
+ __u64 cr;
+ __u64 ctr;
+ __u64 lr;
+ __u64 xer;
+ __u64 msr;
+ __u64 srr0;
+ __u64 srr1;
+ __u64 pid;
+
+ __u64 sprg0;
+ __u64 sprg1;
+ __u64 sprg2;
+ __u64 sprg3;
+ __u64 sprg4;
+ __u64 sprg5;
+ __u64 sprg6;
+ __u64 sprg7;
+
+ __u64 gpr[32];
+};
+
+#define KVM_SREGS_E_IMPL_NONE 0
+#define KVM_SREGS_E_IMPL_FSL 1
+
+#define KVM_SREGS_E_FSL_PIDn (1 << 0) /* PID1/PID2 */
+
+/*
+ * Feature bits indicate which sections of the sregs struct are valid,
+ * both in KVM_GET_SREGS and KVM_SET_SREGS. On KVM_SET_SREGS, registers
+ * corresponding to unset feature bits will not be modified. This allows
+ * restoring a checkpoint made without that feature, while keeping the
+ * default values of the new registers.
+ *
+ * KVM_SREGS_E_BASE contains:
+ * CSRR0/1 (refers to SRR2/3 on 40x)
+ * ESR
+ * DEAR
+ * MCSR
+ * TSR
+ * TCR
+ * DEC
+ * TB
+ * VRSAVE (USPRG0)
+ */
+#define KVM_SREGS_E_BASE (1 << 0)
+
+/*
+ * KVM_SREGS_E_ARCH206 contains:
+ *
+ * PIR
+ * MCSRR0/1
+ * DECAR
+ * IVPR
+ */
+#define KVM_SREGS_E_ARCH206 (1 << 1)
+
+/*
+ * Contains EPCR, plus the upper half of 64-bit registers
+ * that are 32-bit on 32-bit implementations.
+ */
+#define KVM_SREGS_E_64 (1 << 2)
+
+#define KVM_SREGS_E_SPRG8 (1 << 3)
+#define KVM_SREGS_E_MCIVPR (1 << 4)
+
+/*
+ * IVORs are used -- contains IVOR0-15, plus additional IVORs
+ * in combination with an appropriate feature bit.
+ */
+#define KVM_SREGS_E_IVOR (1 << 5)
+
+/*
+ * Contains MAS0-4, MAS6-7, TLBnCFG, MMUCFG.
+ * Also TLBnPS if MMUCFG[MAVN] = 1.
+ */
+#define KVM_SREGS_E_ARCH206_MMU (1 << 6)
+
+/* DBSR, DBCR, IAC, DAC, DVC */
+#define KVM_SREGS_E_DEBUG (1 << 7)
+
+/* Enhanced debug -- DSRR0/1, SPRG9 */
+#define KVM_SREGS_E_ED (1 << 8)
+
+/* Embedded Floating Point (SPE) -- IVOR32-34 if KVM_SREGS_E_IVOR */
+#define KVM_SREGS_E_SPE (1 << 9)
+
+/* External Proxy (EXP) -- EPR */
+#define KVM_SREGS_EXP (1 << 10)
+
+/* External PID (E.PD) -- EPSC/EPLC */
+#define KVM_SREGS_E_PD (1 << 11)
+
+/* Processor Control (E.PC) -- IVOR36-37 if KVM_SREGS_E_IVOR */
+#define KVM_SREGS_E_PC (1 << 12)
+
+/* Page table (E.PT) -- EPTCFG */
+#define KVM_SREGS_E_PT (1 << 13)
+
+/* Embedded Performance Monitor (E.PM) -- IVOR35 if KVM_SREGS_E_IVOR */
+#define KVM_SREGS_E_PM (1 << 14)
+
+/*
+ * Special updates:
+ *
+ * Some registers may change even while a vcpu is not running.
+ * To avoid losing these changes, by default these registers are
+ * not updated by KVM_SET_SREGS. To force an update, set the bit
+ * in u.e.update_special corresponding to the register to be updated.
+ *
+ * The update_special field is zero on return from KVM_GET_SREGS.
+ *
+ * When restoring a checkpoint, the caller can set update_special
+ * to 0xffffffff to ensure that everything is restored, even new features
+ * that the caller doesn't know about.
+ */
+#define KVM_SREGS_E_UPDATE_MCSR (1 << 0)
+#define KVM_SREGS_E_UPDATE_TSR (1 << 1)
+#define KVM_SREGS_E_UPDATE_DEC (1 << 2)
+#define KVM_SREGS_E_UPDATE_DBSR (1 << 3)
+
+/*
+ * In KVM_SET_SREGS, reserved/pad fields must be left untouched from a
+ * previous KVM_GET_REGS.
+ *
+ * Unless otherwise indicated, setting any register with KVM_SET_SREGS
+ * directly sets its value. It does not trigger any special semantics such
+ * as write-one-to-clear. Calling KVM_SET_SREGS on an unmodified struct
+ * just received from KVM_GET_SREGS is always a no-op.
+ */
+struct kvm_sregs {
+ __u32 pvr;
+ union {
+ struct {
+ __u64 sdr1;
+ struct {
+ struct {
+ __u64 slbe;
+ __u64 slbv;
+ } slb[64];
+ } ppc64;
+ struct {
+ __u32 sr[16];
+ __u64 ibat[8];
+ __u64 dbat[8];
+ } ppc32;
+ } s;
+ struct {
+ union {
+ struct { /* KVM_SREGS_E_IMPL_FSL */
+ __u32 features; /* KVM_SREGS_E_FSL_ */
+ __u32 svr;
+ __u64 mcar;
+ __u32 hid0;
+
+ /* KVM_SREGS_E_FSL_PIDn */
+ __u32 pid1, pid2;
+ } fsl;
+ __u8 pad[256];
+ } impl;
+
+ __u32 features; /* KVM_SREGS_E_ */
+ __u32 impl_id; /* KVM_SREGS_E_IMPL_ */
+ __u32 update_special; /* KVM_SREGS_E_UPDATE_ */
+ __u32 pir; /* read-only */
+ __u64 sprg8;
+ __u64 sprg9; /* E.ED */
+ __u64 csrr0;
+ __u64 dsrr0; /* E.ED */
+ __u64 mcsrr0;
+ __u32 csrr1;
+ __u32 dsrr1; /* E.ED */
+ __u32 mcsrr1;
+ __u32 esr;
+ __u64 dear;
+ __u64 ivpr;
+ __u64 mcivpr;
+ __u64 mcsr; /* KVM_SREGS_E_UPDATE_MCSR */
+
+ __u32 tsr; /* KVM_SREGS_E_UPDATE_TSR */
+ __u32 tcr;
+ __u32 decar;
+ __u32 dec; /* KVM_SREGS_E_UPDATE_DEC */
+
+ /*
+ * Userspace can read TB directly, but the
+ * value reported here is consistent with "dec".
+ *
+ * Read-only.
+ */
+ __u64 tb;
+
+ __u32 dbsr; /* KVM_SREGS_E_UPDATE_DBSR */
+ __u32 dbcr[3];
+ __u32 iac[4];
+ __u32 dac[2];
+ __u32 dvc[2];
+ __u8 num_iac; /* read-only */
+ __u8 num_dac; /* read-only */
+ __u8 num_dvc; /* read-only */
+ __u8 pad;
+
+ __u32 epr; /* EXP */
+ __u32 vrsave; /* a.k.a. USPRG0 */
+ __u32 epcr; /* KVM_SREGS_E_64 */
+
+ __u32 mas0;
+ __u32 mas1;
+ __u64 mas2;
+ __u64 mas7_3;
+ __u32 mas4;
+ __u32 mas6;
+
+ __u32 ivor_low[16]; /* IVOR0-15 */
+ __u32 ivor_high[18]; /* IVOR32+, plus room to expand */
+
+ __u32 mmucfg; /* read-only */
+ __u32 eptcfg; /* E.PT, read-only */
+ __u32 tlbcfg[4];/* read-only */
+ __u32 tlbps[4]; /* read-only */
+
+ __u32 eplc, epsc; /* E.PD */
+ } e;
+ __u8 pad[1020];
+ } u;
+};
+
+struct kvm_fpu {
+ __u64 fpr[32];
+};
+
+struct kvm_debug_exit_arch {
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
+#define KVM_REG_MASK 0x001f
+#define KVM_REG_EXT_MASK 0xffe0
+#define KVM_REG_GPR 0x0000
+#define KVM_REG_FPR 0x0020
+#define KVM_REG_QPR 0x0040
+#define KVM_REG_FQPR 0x0060
+
+#define KVM_INTERRUPT_SET -1U
+#define KVM_INTERRUPT_UNSET -2U
+#define KVM_INTERRUPT_SET_LEVEL -3U
+
+#endif /* __LINUX_KVM_POWERPC_H */
--git a/linux-headers/asm-powerpc/kvm_para.h b/linux-headers/asm-powerpc/kvm_para.h
new file mode 100644
index 0000000..ad58c90
--- /dev/null
+++ b/linux-headers/asm-powerpc/kvm_para.h
@@ -0,0 +1,53 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_PARA_H__
+#define __POWERPC_KVM_PARA_H__
+
+#include <linux/types.h>
+
+struct kvm_vcpu_arch_shared {
+ __u64 scratch1;
+ __u64 scratch2;
+ __u64 scratch3;
+ __u64 critical; /* Guest may not get interrupts if == r1 */
+ __u64 sprg0;
+ __u64 sprg1;
+ __u64 sprg2;
+ __u64 sprg3;
+ __u64 srr0;
+ __u64 srr1;
+ __u64 dar;
+ __u64 msr;
+ __u32 dsisr;
+ __u32 int_pending; /* Tells the guest if we have an interrupt */
+ __u32 sr[16];
+};
+
+#define KVM_SC_MAGIC_R0 0x4b564d21 /* "KVM!" */
+#define HC_VENDOR_KVM (42 << 16)
+#define HC_EV_SUCCESS 0
+#define HC_EV_UNIMPLEMENTED 12
+
+#define KVM_FEATURE_MAGIC_PAGE 1
+
+#define KVM_MAGIC_FEAT_SR (1 << 0)
+
+
+#endif /* __POWERPC_KVM_PARA_H__ */
--git a/linux-headers/asm-s390/kvm.h b/linux-headers/asm-s390/kvm.h
new file mode 100644
index 0000000..82b32a1
--- /dev/null
+++ b/linux-headers/asm-s390/kvm.h
@@ -0,0 +1,44 @@
+#ifndef __LINUX_KVM_S390_H
+#define __LINUX_KVM_S390_H
+/*
+ * asm-s390/kvm.h - KVM s390 specific structures and definitions
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * Author(s): Carsten Otte <cotte@de.ibm.com>
+ * Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+#include <linux/types.h>
+
+#define __KVM_S390
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+ /* general purpose regs for s390 */
+ __u64 gprs[16];
+};
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+ __u32 acrs[16];
+ __u64 crs[16];
+};
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u32 fpc;
+ __u64 fprs[16];
+};
+
+struct kvm_debug_exit_arch {
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
+#endif
--git a/linux-headers/asm-s390/kvm_para.h b/linux-headers/asm-s390/kvm_para.h
new file mode 100644
index 0000000..8e2dd67
--- /dev/null
+++ b/linux-headers/asm-s390/kvm_para.h
@@ -0,0 +1,17 @@
+/*
+ * asm-s390/kvm_para.h - definition for paravirtual devices on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+
+#ifndef __S390_KVM_PARA_H
+#define __S390_KVM_PARA_H
+
+
+#endif /* __S390_KVM_PARA_H */
--git a/linux-headers/asm-x86/hyperv.h b/linux-headers/asm-x86/hyperv.h
new file mode 100644
index 0000000..5df477a
--- /dev/null
+++ b/linux-headers/asm-x86/hyperv.h
@@ -0,0 +1,193 @@
+#ifndef _ASM_X86_HYPERV_H
+#define _ASM_X86_HYPERV_H
+
+#include <linux/types.h>
+
+/*
+ * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
+ * is set by CPUID(HvCpuIdFunctionVersionAndFeatures).
+ */
+#define HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS 0x40000000
+#define HYPERV_CPUID_INTERFACE 0x40000001
+#define HYPERV_CPUID_VERSION 0x40000002
+#define HYPERV_CPUID_FEATURES 0x40000003
+#define HYPERV_CPUID_ENLIGHTMENT_INFO 0x40000004
+#define HYPERV_CPUID_IMPLEMENT_LIMITS 0x40000005
+
+#define HYPERV_HYPERVISOR_PRESENT_BIT 0x80000000
+#define HYPERV_CPUID_MIN 0x40000005
+#define HYPERV_CPUID_MAX 0x4000ffff
+
+/*
+ * Feature identification. EAX indicates which features are available
+ * to the partition based upon the current partition privileges.
+ */
+
+/* VP Runtime (HV_X64_MSR_VP_RUNTIME) available */
+#define HV_X64_MSR_VP_RUNTIME_AVAILABLE (1 << 0)
+/* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
+#define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE (1 << 1)
+/*
+ * Basic SynIC MSRs (HV_X64_MSR_SCONTROL through HV_X64_MSR_EOM
+ * and HV_X64_MSR_SINT0 through HV_X64_MSR_SINT15) available
+ */
+#define HV_X64_MSR_SYNIC_AVAILABLE (1 << 2)
+/*
+ * Synthetic Timer MSRs (HV_X64_MSR_STIMER0_CONFIG through
+ * HV_X64_MSR_STIMER3_COUNT) available
+ */
+#define HV_X64_MSR_SYNTIMER_AVAILABLE (1 << 3)
+/*
+ * APIC access MSRs (HV_X64_MSR_EOI, HV_X64_MSR_ICR and HV_X64_MSR_TPR)
+ * are available
+ */
+#define HV_X64_MSR_APIC_ACCESS_AVAILABLE (1 << 4)
+/* Hypercall MSRs (HV_X64_MSR_GUEST_OS_ID and HV_X64_MSR_HYPERCALL) available*/
+#define HV_X64_MSR_HYPERCALL_AVAILABLE (1 << 5)
+/* Access virtual processor index MSR (HV_X64_MSR_VP_INDEX) available*/
+#define HV_X64_MSR_VP_INDEX_AVAILABLE (1 << 6)
+/* Virtual system reset MSR (HV_X64_MSR_RESET) is available*/
+#define HV_X64_MSR_RESET_AVAILABLE (1 << 7)
+ /*
+ * Access statistics pages MSRs (HV_X64_MSR_STATS_PARTITION_RETAIL_PAGE,
+ * HV_X64_MSR_STATS_PARTITION_INTERNAL_PAGE, HV_X64_MSR_STATS_VP_RETAIL_PAGE,
+ * HV_X64_MSR_STATS_VP_INTERNAL_PAGE) available
+ */
+#define HV_X64_MSR_STAT_PAGES_AVAILABLE (1 << 8)
+
+/*
+ * Feature identification: EBX indicates which flags were specified at
+ * partition creation. The format is the same as the partition creation
+ * flag structure defined in section Partition Creation Flags.
+ */
+#define HV_X64_CREATE_PARTITIONS (1 << 0)
+#define HV_X64_ACCESS_PARTITION_ID (1 << 1)
+#define HV_X64_ACCESS_MEMORY_POOL (1 << 2)
+#define HV_X64_ADJUST_MESSAGE_BUFFERS (1 << 3)
+#define HV_X64_POST_MESSAGES (1 << 4)
+#define HV_X64_SIGNAL_EVENTS (1 << 5)
+#define HV_X64_CREATE_PORT (1 << 6)
+#define HV_X64_CONNECT_PORT (1 << 7)
+#define HV_X64_ACCESS_STATS (1 << 8)
+#define HV_X64_DEBUGGING (1 << 11)
+#define HV_X64_CPU_POWER_MANAGEMENT (1 << 12)
+#define HV_X64_CONFIGURE_PROFILER (1 << 13)
+
+/*
+ * Feature identification. EDX indicates which miscellaneous features
+ * are available to the partition.
+ */
+/* The MWAIT instruction is available (per section MONITOR / MWAIT) */
+#define HV_X64_MWAIT_AVAILABLE (1 << 0)
+/* Guest debugging support is available */
+#define HV_X64_GUEST_DEBUGGING_AVAILABLE (1 << 1)
+/* Performance Monitor support is available*/
+#define HV_X64_PERF_MONITOR_AVAILABLE (1 << 2)
+/* Support for physical CPU dynamic partitioning events is available*/
+#define HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE (1 << 3)
+/*
+ * Support for passing hypercall input parameter block via XMM
+ * registers is available
+ */
+#define HV_X64_HYPERCALL_PARAMS_XMM_AVAILABLE (1 << 4)
+/* Support for a virtual guest idle state is available */
+#define HV_X64_GUEST_IDLE_STATE_AVAILABLE (1 << 5)
+
+/*
+ * Implementation recommendations. Indicates which behaviors the hypervisor
+ * recommends the OS implement for optimal performance.
+ */
+ /*
+ * Recommend using hypercall for address space switches rather
+ * than MOV to CR3 instruction
+ */
+#define HV_X64_MWAIT_RECOMMENDED (1 << 0)
+/* Recommend using hypercall for local TLB flushes rather
+ * than INVLPG or MOV to CR3 instructions */
+#define HV_X64_LOCAL_TLB_FLUSH_RECOMMENDED (1 << 1)
+/*
+ * Recommend using hypercall for remote TLB flushes rather
+ * than inter-processor interrupts
+ */
+#define HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED (1 << 2)
+/*
+ * Recommend using MSRs for accessing APIC registers
+ * EOI, ICR and TPR rather than their memory-mapped counterparts
+ */
+#define HV_X64_APIC_ACCESS_RECOMMENDED (1 << 3)
+/* Recommend using the hypervisor-provided MSR to initiate a system RESET */
+#define HV_X64_SYSTEM_RESET_RECOMMENDED (1 << 4)
+/*
+ * Recommend using relaxed timing for this partition. If used,
+ * the VM should disable any watchdog timeouts that rely on the
+ * timely delivery of external interrupts
+ */
+#define HV_X64_RELAXED_TIMING_RECOMMENDED (1 << 5)
+
+/* MSR used to identify the guest OS. */
+#define HV_X64_MSR_GUEST_OS_ID 0x40000000
+
+/* MSR used to setup pages used to communicate with the hypervisor. */
+#define HV_X64_MSR_HYPERCALL 0x40000001
+
+/* MSR used to provide vcpu index */
+#define HV_X64_MSR_VP_INDEX 0x40000002
+
+/* MSR used to read the per-partition time reference counter */
+#define HV_X64_MSR_TIME_REF_COUNT 0x40000020
+
+/* Define the virtual APIC registers */
+#define HV_X64_MSR_EOI 0x40000070
+#define HV_X64_MSR_ICR 0x40000071
+#define HV_X64_MSR_TPR 0x40000072
+#define HV_X64_MSR_APIC_ASSIST_PAGE 0x40000073
+
+/* Define synthetic interrupt controller model specific registers. */
+#define HV_X64_MSR_SCONTROL 0x40000080
+#define HV_X64_MSR_SVERSION 0x40000081
+#define HV_X64_MSR_SIEFP 0x40000082
+#define HV_X64_MSR_SIMP 0x40000083
+#define HV_X64_MSR_EOM 0x40000084
+#define HV_X64_MSR_SINT0 0x40000090
+#define HV_X64_MSR_SINT1 0x40000091
+#define HV_X64_MSR_SINT2 0x40000092
+#define HV_X64_MSR_SINT3 0x40000093
+#define HV_X64_MSR_SINT4 0x40000094
+#define HV_X64_MSR_SINT5 0x40000095
+#define HV_X64_MSR_SINT6 0x40000096
+#define HV_X64_MSR_SINT7 0x40000097
+#define HV_X64_MSR_SINT8 0x40000098
+#define HV_X64_MSR_SINT9 0x40000099
+#define HV_X64_MSR_SINT10 0x4000009A
+#define HV_X64_MSR_SINT11 0x4000009B
+#define HV_X64_MSR_SINT12 0x4000009C
+#define HV_X64_MSR_SINT13 0x4000009D
+#define HV_X64_MSR_SINT14 0x4000009E
+#define HV_X64_MSR_SINT15 0x4000009F
+
+
+#define HV_X64_MSR_HYPERCALL_ENABLE 0x00000001
+#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT 12
+#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_MASK \
+ (~((1ull << HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT) - 1))
+
+/* Declare the various hypercall operations. */
+#define HV_X64_HV_NOTIFY_LONG_SPIN_WAIT 0x0008
+
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE 0x00000001
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT 12
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_MASK \
+ (~((1ull << HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT) - 1))
+
+#define HV_PROCESSOR_POWER_STATE_C0 0
+#define HV_PROCESSOR_POWER_STATE_C1 1
+#define HV_PROCESSOR_POWER_STATE_C2 2
+#define HV_PROCESSOR_POWER_STATE_C3 3
+
+/* hypercall status code */
+#define HV_STATUS_SUCCESS 0
+#define HV_STATUS_INVALID_HYPERCALL_CODE 2
+#define HV_STATUS_INVALID_HYPERCALL_INPUT 3
+#define HV_STATUS_INVALID_ALIGNMENT 4
+
+#endif
--git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h
new file mode 100644
index 0000000..4d8dcbd
--- /dev/null
+++ b/linux-headers/asm-x86/kvm.h
@@ -0,0 +1,324 @@
+#ifndef _ASM_X86_KVM_H
+#define _ASM_X86_KVM_H
+
+/*
+ * KVM x86 specific structures and definitions
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/* Select x86 specific features in <linux/kvm.h> */
+#define __KVM_HAVE_PIT
+#define __KVM_HAVE_IOAPIC
+#define __KVM_HAVE_DEVICE_ASSIGNMENT
+#define __KVM_HAVE_MSI
+#define __KVM_HAVE_USER_NMI
+#define __KVM_HAVE_GUEST_DEBUG
+#define __KVM_HAVE_MSIX
+#define __KVM_HAVE_MCE
+#define __KVM_HAVE_PIT_STATE2
+#define __KVM_HAVE_XEN_HVM
+#define __KVM_HAVE_VCPU_EVENTS
+#define __KVM_HAVE_DEBUGREGS
+#define __KVM_HAVE_XSAVE
+#define __KVM_HAVE_XCRS
+
+/* Architectural interrupt line count. */
+#define KVM_NR_INTERRUPTS 256
+
+struct kvm_memory_alias {
+ __u32 slot; /* this has a different namespace than memory slots */
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size;
+ __u64 target_phys_addr;
+};
+
+/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
+struct kvm_pic_state {
+ __u8 last_irr; /* edge detection */
+ __u8 irr; /* interrupt request register */
+ __u8 imr; /* interrupt mask register */
+ __u8 isr; /* interrupt service register */
+ __u8 priority_add; /* highest irq priority */
+ __u8 irq_base;
+ __u8 read_reg_select;
+ __u8 poll;
+ __u8 special_mask;
+ __u8 init_state;
+ __u8 auto_eoi;
+ __u8 rotate_on_auto_eoi;
+ __u8 special_fully_nested_mode;
+ __u8 init4; /* true if 4 byte init */
+ __u8 elcr; /* PIIX edge/trigger selection */
+ __u8 elcr_mask;
+};
+
+#define KVM_IOAPIC_NUM_PINS 24
+struct kvm_ioapic_state {
+ __u64 base_address;
+ __u32 ioregsel;
+ __u32 id;
+ __u32 irr;
+ __u32 pad;
+ union {
+ __u64 bits;
+ struct {
+ __u8 vector;
+ __u8 delivery_mode:3;
+ __u8 dest_mode:1;
+ __u8 delivery_status:1;
+ __u8 polarity:1;
+ __u8 remote_irr:1;
+ __u8 trig_mode:1;
+ __u8 mask:1;
+ __u8 reserve:7;
+ __u8 reserved[4];
+ __u8 dest_id;
+ } fields;
+ } redirtbl[KVM_IOAPIC_NUM_PINS];
+};
+
+#define KVM_IRQCHIP_PIC_MASTER 0
+#define KVM_IRQCHIP_PIC_SLAVE 1
+#define KVM_IRQCHIP_IOAPIC 2
+#define KVM_NR_IRQCHIPS 3
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 rax, rbx, rcx, rdx;
+ __u64 rsi, rdi, rsp, rbp;
+ __u64 r8, r9, r10, r11;
+ __u64 r12, r13, r14, r15;
+ __u64 rip, rflags;
+};
+
+/* for KVM_GET_LAPIC and KVM_SET_LAPIC */
+#define KVM_APIC_REG_SIZE 0x400
+struct kvm_lapic_state {
+ char regs[KVM_APIC_REG_SIZE];
+};
+
+struct kvm_segment {
+ __u64 base;
+ __u32 limit;
+ __u16 selector;
+ __u8 type;
+ __u8 present, dpl, db, s, l, g, avl;
+ __u8 unusable;
+ __u8 padding;
+};
+
+struct kvm_dtable {
+ __u64 base;
+ __u16 limit;
+ __u16 padding[3];
+};
+
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+ /* out (KVM_GET_SREGS) / in (KVM_SET_SREGS) */
+ struct kvm_segment cs, ds, es, fs, gs, ss;
+ struct kvm_segment tr, ldt;
+ struct kvm_dtable gdt, idt;
+ __u64 cr0, cr2, cr3, cr4, cr8;
+ __u64 efer;
+ __u64 apic_base;
+ __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
+};
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u8 fpr[8][16];
+ __u16 fcw;
+ __u16 fsw;
+ __u8 ftwx; /* in fxsave format */
+ __u8 pad1;
+ __u16 last_opcode;
+ __u64 last_ip;
+ __u64 last_dp;
+ __u8 xmm[16][16];
+ __u32 mxcsr;
+ __u32 pad2;
+};
+
+struct kvm_msr_entry {
+ __u32 index;
+ __u32 reserved;
+ __u64 data;
+};
+
+/* for KVM_GET_MSRS and KVM_SET_MSRS */
+struct kvm_msrs {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 pad;
+
+ struct kvm_msr_entry entries[0];
+};
+
+/* for KVM_GET_MSR_INDEX_LIST */
+struct kvm_msr_list {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 indices[0];
+};
+
+
+struct kvm_cpuid_entry {
+ __u32 function;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding;
+};
+
+/* for KVM_SET_CPUID */
+struct kvm_cpuid {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry entries[0];
+};
+
+struct kvm_cpuid_entry2 {
+ __u32 function;
+ __u32 index;
+ __u32 flags;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding[3];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
+#define KVM_CPUID_FLAG_STATEFUL_FUNC 2
+#define KVM_CPUID_FLAG_STATE_READ_NEXT 4
+
+/* for KVM_SET_CPUID2 */
+struct kvm_cpuid2 {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry2 entries[0];
+};
+
+/* for KVM_GET_PIT and KVM_SET_PIT */
+struct kvm_pit_channel_state {
+ __u32 count; /* can be 65536 */
+ __u16 latched_count;
+ __u8 count_latched;
+ __u8 status_latched;
+ __u8 status;
+ __u8 read_state;
+ __u8 write_state;
+ __u8 write_latch;
+ __u8 rw_mode;
+ __u8 mode;
+ __u8 bcd;
+ __u8 gate;
+ __s64 count_load_time;
+};
+
+struct kvm_debug_exit_arch {
+ __u32 exception;
+ __u32 pad;
+ __u64 pc;
+ __u64 dr6;
+ __u64 dr7;
+};
+
+#define KVM_GUESTDBG_USE_SW_BP 0x00010000
+#define KVM_GUESTDBG_USE_HW_BP 0x00020000
+#define KVM_GUESTDBG_INJECT_DB 0x00040000
+#define KVM_GUESTDBG_INJECT_BP 0x00080000
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+ __u64 debugreg[8];
+};
+
+struct kvm_pit_state {
+ struct kvm_pit_channel_state channels[3];
+};
+
+#define KVM_PIT_FLAGS_HPET_LEGACY 0x00000001
+
+struct kvm_pit_state2 {
+ struct kvm_pit_channel_state channels[3];
+ __u32 flags;
+ __u32 reserved[9];
+};
+
+struct kvm_reinject_control {
+ __u8 pit_reinject;
+ __u8 reserved[31];
+};
+
+/* When set in flags, include corresponding fields on KVM_SET_VCPU_EVENTS */
+#define KVM_VCPUEVENT_VALID_NMI_PENDING 0x00000001
+#define KVM_VCPUEVENT_VALID_SIPI_VECTOR 0x00000002
+#define KVM_VCPUEVENT_VALID_SHADOW 0x00000004
+
+/* Interrupt shadow states */
+#define KVM_X86_SHADOW_INT_MOV_SS 0x01
+#define KVM_X86_SHADOW_INT_STI 0x02
+
+/* for KVM_GET/SET_VCPU_EVENTS */
+struct kvm_vcpu_events {
+ struct {
+ __u8 injected;
+ __u8 nr;
+ __u8 has_error_code;
+ __u8 pad;
+ __u32 error_code;
+ } exception;
+ struct {
+ __u8 injected;
+ __u8 nr;
+ __u8 soft;
+ __u8 shadow;
+ } interrupt;
+ struct {
+ __u8 injected;
+ __u8 pending;
+ __u8 masked;
+ __u8 pad;
+ } nmi;
+ __u32 sipi_vector;
+ __u32 flags;
+ __u32 reserved[10];
+};
+
+/* for KVM_GET/SET_DEBUGREGS */
+struct kvm_debugregs {
+ __u64 db[4];
+ __u64 dr6;
+ __u64 dr7;
+ __u64 flags;
+ __u64 reserved[9];
+};
+
+/* for KVM_CAP_XSAVE */
+struct kvm_xsave {
+ __u32 region[1024];
+};
+
+#define KVM_MAX_XCRS 16
+
+struct kvm_xcr {
+ __u32 xcr;
+ __u32 reserved;
+ __u64 value;
+};
+
+struct kvm_xcrs {
+ __u32 nr_xcrs;
+ __u32 flags;
+ struct kvm_xcr xcrs[KVM_MAX_XCRS];
+ __u64 padding[16];
+};
+
+#endif /* _ASM_X86_KVM_H */
--git a/linux-headers/asm-x86/kvm_para.h b/linux-headers/asm-x86/kvm_para.h
new file mode 100644
index 0000000..834d71e
--- /dev/null
+++ b/linux-headers/asm-x86/kvm_para.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_X86_KVM_PARA_H
+#define _ASM_X86_KVM_PARA_H
+
+#include <linux/types.h>
+#include <asm/hyperv.h>
+
+/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx. It
+ * should be used to determine that a VM is running under KVM.
+ */
+#define KVM_CPUID_SIGNATURE 0x40000000
+
+/* This CPUID returns a feature bitmap in eax. Before enabling a particular
+ * paravirtualization, the appropriate feature bit should be checked.
+ */
+#define KVM_CPUID_FEATURES 0x40000001
+#define KVM_FEATURE_CLOCKSOURCE 0
+#define KVM_FEATURE_NOP_IO_DELAY 1
+#define KVM_FEATURE_MMU_OP 2
+/* This indicates that the new set of kvmclock msrs
+ * are available. The use of 0x11 and 0x12 is deprecated
+ */
+#define KVM_FEATURE_CLOCKSOURCE2 3
+#define KVM_FEATURE_ASYNC_PF 4
+
+/* The last 8 bits are used to indicate how to interpret the flags field
+ * in pvclock structure. If no bits are set, all flags are ignored.
+ */
+#define KVM_FEATURE_CLOCKSOURCE_STABLE_BIT 24
+
+#define MSR_KVM_WALL_CLOCK 0x11
+#define MSR_KVM_SYSTEM_TIME 0x12
+
+/* Custom MSRs falls in the range 0x4b564d00-0x4b564dff */
+#define MSR_KVM_WALL_CLOCK_NEW 0x4b564d00
+#define MSR_KVM_SYSTEM_TIME_NEW 0x4b564d01
+#define MSR_KVM_ASYNC_PF_EN 0x4b564d02
+
+#define KVM_MAX_MMU_OP_BATCH 32
+
+#define KVM_ASYNC_PF_ENABLED (1 << 0)
+#define KVM_ASYNC_PF_SEND_ALWAYS (1 << 1)
+
+/* Operations for KVM_HC_MMU_OP */
+#define KVM_MMU_OP_WRITE_PTE 1
+#define KVM_MMU_OP_FLUSH_TLB 2
+#define KVM_MMU_OP_RELEASE_PT 3
+
+/* Payload for KVM_HC_MMU_OP */
+struct kvm_mmu_op_header {
+ __u32 op;
+ __u32 pad;
+};
+
+struct kvm_mmu_op_write_pte {
+ struct kvm_mmu_op_header header;
+ __u64 pte_phys;
+ __u64 pte_val;
+};
+
+struct kvm_mmu_op_flush_tlb {
+ struct kvm_mmu_op_header header;
+};
+
+struct kvm_mmu_op_release_pt {
+ struct kvm_mmu_op_header header;
+ __u64 pt_phys;
+};
+
+#define KVM_PV_REASON_PAGE_NOT_PRESENT 1
+#define KVM_PV_REASON_PAGE_READY 2
+
+struct kvm_vcpu_pv_apf_data {
+ __u32 reason;
+ __u8 pad[60];
+ __u32 enabled;
+};
+
+
+#endif /* _ASM_X86_KVM_PARA_H */
--git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
new file mode 100644
index 0000000..fc63b73
--- /dev/null
+++ b/linux-headers/linux/kvm.h
@@ -0,0 +1,804 @@
+#ifndef __LINUX_KVM_H
+#define __LINUX_KVM_H
+
+/*
+ * Userspace interface for /dev/kvm - kernel based virtual machine
+ *
+ * Note: you must update KVM_API_VERSION if you change this interface.
+ */
+
+#include <linux/types.h>
+
+#include <linux/ioctl.h>
+#include <asm/kvm.h>
+
+#define KVM_API_VERSION 12
+
+/* *** Deprecated interfaces *** */
+
+#define KVM_TRC_SHIFT 16
+
+#define KVM_TRC_ENTRYEXIT (1 << KVM_TRC_SHIFT)
+#define KVM_TRC_HANDLER (1 << (KVM_TRC_SHIFT + 1))
+
+#define KVM_TRC_VMENTRY (KVM_TRC_ENTRYEXIT + 0x01)
+#define KVM_TRC_VMEXIT (KVM_TRC_ENTRYEXIT + 0x02)
+#define KVM_TRC_PAGE_FAULT (KVM_TRC_HANDLER + 0x01)
+
+#define KVM_TRC_HEAD_SIZE 12
+#define KVM_TRC_CYCLE_SIZE 8
+#define KVM_TRC_EXTRA_MAX 7
+
+#define KVM_TRC_INJ_VIRQ (KVM_TRC_HANDLER + 0x02)
+#define KVM_TRC_REDELIVER_EVT (KVM_TRC_HANDLER + 0x03)
+#define KVM_TRC_PEND_INTR (KVM_TRC_HANDLER + 0x04)
+#define KVM_TRC_IO_READ (KVM_TRC_HANDLER + 0x05)
+#define KVM_TRC_IO_WRITE (KVM_TRC_HANDLER + 0x06)
+#define KVM_TRC_CR_READ (KVM_TRC_HANDLER + 0x07)
+#define KVM_TRC_CR_WRITE (KVM_TRC_HANDLER + 0x08)
+#define KVM_TRC_DR_READ (KVM_TRC_HANDLER + 0x09)
+#define KVM_TRC_DR_WRITE (KVM_TRC_HANDLER + 0x0A)
+#define KVM_TRC_MSR_READ (KVM_TRC_HANDLER + 0x0B)
+#define KVM_TRC_MSR_WRITE (KVM_TRC_HANDLER + 0x0C)
+#define KVM_TRC_CPUID (KVM_TRC_HANDLER + 0x0D)
+#define KVM_TRC_INTR (KVM_TRC_HANDLER + 0x0E)
+#define KVM_TRC_NMI (KVM_TRC_HANDLER + 0x0F)
+#define KVM_TRC_VMMCALL (KVM_TRC_HANDLER + 0x10)
+#define KVM_TRC_HLT (KVM_TRC_HANDLER + 0x11)
+#define KVM_TRC_CLTS (KVM_TRC_HANDLER + 0x12)
+#define KVM_TRC_LMSW (KVM_TRC_HANDLER + 0x13)
+#define KVM_TRC_APIC_ACCESS (KVM_TRC_HANDLER + 0x14)
+#define KVM_TRC_TDP_FAULT (KVM_TRC_HANDLER + 0x15)
+#define KVM_TRC_GTLB_WRITE (KVM_TRC_HANDLER + 0x16)
+#define KVM_TRC_STLB_WRITE (KVM_TRC_HANDLER + 0x17)
+#define KVM_TRC_STLB_INVAL (KVM_TRC_HANDLER + 0x18)
+#define KVM_TRC_PPC_INSTR (KVM_TRC_HANDLER + 0x19)
+
+struct kvm_user_trace_setup {
+ __u32 buf_size;
+ __u32 buf_nr;
+};
+
+#define __KVM_DEPRECATED_MAIN_W_0x06 \
+ _IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
+#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
+#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
+
+#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
+
+struct kvm_breakpoint {
+ __u32 enabled;
+ __u32 padding;
+ __u64 address;
+};
+
+struct kvm_debug_guest {
+ __u32 enabled;
+ __u32 pad;
+ struct kvm_breakpoint breakpoints[4];
+ __u32 singlestep;
+};
+
+#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
+
+/* *** End of deprecated interfaces *** */
+
+
+/* for KVM_CREATE_MEMORY_REGION */
+struct kvm_memory_region {
+ __u32 slot;
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+};
+
+/* for KVM_SET_USER_MEMORY_REGION */
+struct kvm_userspace_memory_region {
+ __u32 slot;
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+ __u64 userspace_addr; /* start of the userspace allocated memory */
+};
+
+/* for kvm_memory_region::flags */
+#define KVM_MEM_LOG_DIRTY_PAGES 1UL
+#define KVM_MEMSLOT_INVALID (1UL << 1)
+
+/* for KVM_IRQ_LINE */
+struct kvm_irq_level {
+ /*
+ * ACPI gsi notion of irq.
+ * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
+ * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
+ */
+ union {
+ __u32 irq;
+ __s32 status;
+ };
+ __u32 level;
+};
+
+
+struct kvm_irqchip {
+ __u32 chip_id;
+ __u32 pad;
+ union {
+ char dummy[512]; /* reserving space */
+#ifdef __KVM_HAVE_PIT
+ struct kvm_pic_state pic;
+#endif
+#ifdef __KVM_HAVE_IOAPIC
+ struct kvm_ioapic_state ioapic;
+#endif
+ } chip;
+};
+
+/* for KVM_CREATE_PIT2 */
+struct kvm_pit_config {
+ __u32 flags;
+ __u32 pad[15];
+};
+
+#define KVM_PIT_SPEAKER_DUMMY 1
+
+#define KVM_EXIT_UNKNOWN 0
+#define KVM_EXIT_EXCEPTION 1
+#define KVM_EXIT_IO 2
+#define KVM_EXIT_HYPERCALL 3
+#define KVM_EXIT_DEBUG 4
+#define KVM_EXIT_HLT 5
+#define KVM_EXIT_MMIO 6
+#define KVM_EXIT_IRQ_WINDOW_OPEN 7
+#define KVM_EXIT_SHUTDOWN 8
+#define KVM_EXIT_FAIL_ENTRY 9
+#define KVM_EXIT_INTR 10
+#define KVM_EXIT_SET_TPR 11
+#define KVM_EXIT_TPR_ACCESS 12
+#define KVM_EXIT_S390_SIEIC 13
+#define KVM_EXIT_S390_RESET 14
+#define KVM_EXIT_DCR 15
+#define KVM_EXIT_NMI 16
+#define KVM_EXIT_INTERNAL_ERROR 17
+#define KVM_EXIT_OSI 18
+
+/* For KVM_EXIT_INTERNAL_ERROR */
+#define KVM_INTERNAL_ERROR_EMULATION 1
+#define KVM_INTERNAL_ERROR_SIMUL_EX 2
+
+/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
+struct kvm_run {
+ /* in */
+ __u8 request_interrupt_window;
+ __u8 padding1[7];
+
+ /* out */
+ __u32 exit_reason;
+ __u8 ready_for_interrupt_injection;
+ __u8 if_flag;
+ __u8 padding2[2];
+
+ /* in (pre_kvm_run), out (post_kvm_run) */
+ __u64 cr8;
+ __u64 apic_base;
+
+#ifdef __KVM_S390
+ /* the processor status word for s390 */
+ __u64 psw_mask; /* psw upper half */
+ __u64 psw_addr; /* psw lower half */
+#endif
+ union {
+ /* KVM_EXIT_UNKNOWN */
+ struct {
+ __u64 hardware_exit_reason;
+ } hw;
+ /* KVM_EXIT_FAIL_ENTRY */
+ struct {
+ __u64 hardware_entry_failure_reason;
+ } fail_entry;
+ /* KVM_EXIT_EXCEPTION */
+ struct {
+ __u32 exception;
+ __u32 error_code;
+ } ex;
+ /* KVM_EXIT_IO */
+ struct {
+#define KVM_EXIT_IO_IN 0
+#define KVM_EXIT_IO_OUT 1
+ __u8 direction;
+ __u8 size; /* bytes */
+ __u16 port;
+ __u32 count;
+ __u64 data_offset; /* relative to kvm_run start */
+ } io;
+ struct {
+ struct kvm_debug_exit_arch arch;
+ } debug;
+ /* KVM_EXIT_MMIO */
+ struct {
+ __u64 phys_addr;
+ __u8 data[8];
+ __u32 len;
+ __u8 is_write;
+ } mmio;
+ /* KVM_EXIT_HYPERCALL */
+ struct {
+ __u64 nr;
+ __u64 args[6];
+ __u64 ret;
+ __u32 longmode;
+ __u32 pad;
+ } hypercall;
+ /* KVM_EXIT_TPR_ACCESS */
+ struct {
+ __u64 rip;
+ __u32 is_write;
+ __u32 pad;
+ } tpr_access;
+ /* KVM_EXIT_S390_SIEIC */
+ struct {
+ __u8 icptcode;
+ __u16 ipa;
+ __u32 ipb;
+ } s390_sieic;
+ /* KVM_EXIT_S390_RESET */
+#define KVM_S390_RESET_POR 1
+#define KVM_S390_RESET_CLEAR 2
+#define KVM_S390_RESET_SUBSYSTEM 4
+#define KVM_S390_RESET_CPU_INIT 8
+#define KVM_S390_RESET_IPL 16
+ __u64 s390_reset_flags;
+ /* KVM_EXIT_DCR */
+ struct {
+ __u32 dcrn;
+ __u32 data;
+ __u8 is_write;
+ } dcr;
+ struct {
+ __u32 suberror;
+ /* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
+ __u32 ndata;
+ __u64 data[16];
+ } internal;
+ /* KVM_EXIT_OSI */
+ struct {
+ __u64 gprs[32];
+ } osi;
+ /* Fix the size of the union. */
+ char padding[256];
+ };
+};
+
+/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
+
+struct kvm_coalesced_mmio_zone {
+ __u64 addr;
+ __u32 size;
+ __u32 pad;
+};
+
+struct kvm_coalesced_mmio {
+ __u64 phys_addr;
+ __u32 len;
+ __u32 pad;
+ __u8 data[8];
+};
+
+struct kvm_coalesced_mmio_ring {
+ __u32 first, last;
+ struct kvm_coalesced_mmio coalesced_mmio[0];
+};
+
+#define KVM_COALESCED_MMIO_MAX \
+ ((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \
+ sizeof(struct kvm_coalesced_mmio))
+
+/* for KVM_TRANSLATE */
+struct kvm_translation {
+ /* in */
+ __u64 linear_address;
+
+ /* out */
+ __u64 physical_address;
+ __u8 valid;
+ __u8 writeable;
+ __u8 usermode;
+ __u8 pad[5];
+};
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+ /* in */
+ __u32 irq;
+};
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+ __u32 slot;
+ __u32 padding1;
+ union {
+ void *dirty_bitmap; /* one bit per page */
+ __u64 padding2;
+ };
+};
+
+/* for KVM_SET_SIGNAL_MASK */
+struct kvm_signal_mask {
+ __u32 len;
+ __u8 sigset[0];
+};
+
+/* for KVM_TPR_ACCESS_REPORTING */
+struct kvm_tpr_access_ctl {
+ __u32 enabled;
+ __u32 flags;
+ __u32 reserved[8];
+};
+
+/* for KVM_SET_VAPIC_ADDR */
+struct kvm_vapic_addr {
+ __u64 vapic_addr;
+};
+
+/* for KVM_SET_MPSTATE */
+
+#define KVM_MP_STATE_RUNNABLE 0
+#define KVM_MP_STATE_UNINITIALIZED 1
+#define KVM_MP_STATE_INIT_RECEIVED 2
+#define KVM_MP_STATE_HALTED 3
+#define KVM_MP_STATE_SIPI_RECEIVED 4
+
+struct kvm_mp_state {
+ __u32 mp_state;
+};
+
+struct kvm_s390_psw {
+ __u64 mask;
+ __u64 addr;
+};
+
+/* valid values for type in kvm_s390_interrupt */
+#define KVM_S390_SIGP_STOP 0xfffe0000u
+#define KVM_S390_PROGRAM_INT 0xfffe0001u
+#define KVM_S390_SIGP_SET_PREFIX 0xfffe0002u
+#define KVM_S390_RESTART 0xfffe0003u
+#define KVM_S390_INT_VIRTIO 0xffff2603u
+#define KVM_S390_INT_SERVICE 0xffff2401u
+#define KVM_S390_INT_EMERGENCY 0xffff1201u
+
+struct kvm_s390_interrupt {
+ __u32 type;
+ __u32 parm;
+ __u64 parm64;
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+
+#define KVM_GUESTDBG_ENABLE 0x00000001
+#define KVM_GUESTDBG_SINGLESTEP 0x00000002
+
+struct kvm_guest_debug {
+ __u32 control;
+ __u32 pad;
+ struct kvm_guest_debug_arch arch;
+};
+
+enum {
+ kvm_ioeventfd_flag_nr_datamatch,
+ kvm_ioeventfd_flag_nr_pio,
+ kvm_ioeventfd_flag_nr_deassign,
+ kvm_ioeventfd_flag_nr_max,
+};
+
+#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
+#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio)
+#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign)
+
+#define KVM_IOEVENTFD_VALID_FLAG_MASK ((1 << kvm_ioeventfd_flag_nr_max) - 1)
+
+struct kvm_ioeventfd {
+ __u64 datamatch;
+ __u64 addr; /* legal pio/mmio address */
+ __u32 len; /* 1, 2, 4, or 8 bytes */
+ __s32 fd;
+ __u32 flags;
+ __u8 pad[36];
+};
+
+/* for KVM_ENABLE_CAP */
+struct kvm_enable_cap {
+ /* in */
+ __u32 cap;
+ __u32 flags;
+ __u64 args[4];
+ __u8 pad[64];
+};
+
+/* for KVM_PPC_GET_PVINFO */
+struct kvm_ppc_pvinfo {
+ /* out */
+ __u32 flags;
+ __u32 hcall[4];
+ __u8 pad[108];
+};
+
+#define KVMIO 0xAE
+
+/*
+ * ioctls for /dev/kvm fds:
+ */
+#define KVM_GET_API_VERSION _IO(KVMIO, 0x00)
+#define KVM_CREATE_VM _IO(KVMIO, 0x01) /* returns a VM fd */
+#define KVM_GET_MSR_INDEX_LIST _IOWR(KVMIO, 0x02, struct kvm_msr_list)
+
+#define KVM_S390_ENABLE_SIE _IO(KVMIO, 0x06)
+/*
+ * Check if a kvm extension is available. Argument is extension number,
+ * return is 1 (yes) or 0 (no, sorry).
+ */
+#define KVM_CHECK_EXTENSION _IO(KVMIO, 0x03)
+/*
+ * Get size for mmap(vcpu_fd)
+ */
+#define KVM_GET_VCPU_MMAP_SIZE _IO(KVMIO, 0x04) /* in bytes */
+#define KVM_GET_SUPPORTED_CPUID _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
+#define KVM_TRACE_ENABLE __KVM_DEPRECATED_MAIN_W_0x06
+#define KVM_TRACE_PAUSE __KVM_DEPRECATED_MAIN_0x07
+#define KVM_TRACE_DISABLE __KVM_DEPRECATED_MAIN_0x08
+
+/*
+ * Extension capability list.
+ */
+#define KVM_CAP_IRQCHIP 0
+#define KVM_CAP_HLT 1
+#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2
+#define KVM_CAP_USER_MEMORY 3
+#define KVM_CAP_SET_TSS_ADDR 4
+#define KVM_CAP_VAPIC 6
+#define KVM_CAP_EXT_CPUID 7
+#define KVM_CAP_CLOCKSOURCE 8
+#define KVM_CAP_NR_VCPUS 9 /* returns max vcpus per vm */
+#define KVM_CAP_NR_MEMSLOTS 10 /* returns max memory slots per vm */
+#define KVM_CAP_PIT 11
+#define KVM_CAP_NOP_IO_DELAY 12
+#define KVM_CAP_PV_MMU 13
+#define KVM_CAP_MP_STATE 14
+#define KVM_CAP_COALESCED_MMIO 15
+#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
+#define KVM_CAP_DEVICE_ASSIGNMENT 17
+#endif
+#define KVM_CAP_IOMMU 18
+#ifdef __KVM_HAVE_MSI
+#define KVM_CAP_DEVICE_MSI 20
+#endif
+/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
+#ifdef __KVM_HAVE_USER_NMI
+#define KVM_CAP_USER_NMI 22
+#endif
+#ifdef __KVM_HAVE_GUEST_DEBUG
+#define KVM_CAP_SET_GUEST_DEBUG 23
+#endif
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_REINJECT_CONTROL 24
+#endif
+#ifdef __KVM_HAVE_IOAPIC
+#define KVM_CAP_IRQ_ROUTING 25
+#endif
+#define KVM_CAP_IRQ_INJECT_STATUS 26
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
+#define KVM_CAP_DEVICE_DEASSIGNMENT 27
+#endif
+#ifdef __KVM_HAVE_MSIX
+#define KVM_CAP_DEVICE_MSIX 28
+#endif
+#define KVM_CAP_ASSIGN_DEV_IRQ 29
+/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
+#ifdef __KVM_HAVE_MCE
+#define KVM_CAP_MCE 31
+#endif
+#define KVM_CAP_IRQFD 32
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_PIT2 33
+#endif
+#define KVM_CAP_SET_BOOT_CPU_ID 34
+#ifdef __KVM_HAVE_PIT_STATE2
+#define KVM_CAP_PIT_STATE2 35
+#endif
+#define KVM_CAP_IOEVENTFD 36
+#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
+#ifdef __KVM_HAVE_XEN_HVM
+#define KVM_CAP_XEN_HVM 38
+#endif
+#define KVM_CAP_ADJUST_CLOCK 39
+#define KVM_CAP_INTERNAL_ERROR_DATA 40
+#ifdef __KVM_HAVE_VCPU_EVENTS
+#define KVM_CAP_VCPU_EVENTS 41
+#endif
+#define KVM_CAP_S390_PSW 42
+#define KVM_CAP_PPC_SEGSTATE 43
+#define KVM_CAP_HYPERV 44
+#define KVM_CAP_HYPERV_VAPIC 45
+#define KVM_CAP_HYPERV_SPIN 46
+#define KVM_CAP_PCI_SEGMENT 47
+#define KVM_CAP_PPC_PAIRED_SINGLES 48
+#define KVM_CAP_INTR_SHADOW 49
+#ifdef __KVM_HAVE_DEBUGREGS
+#define KVM_CAP_DEBUGREGS 50
+#endif
+#define KVM_CAP_X86_ROBUST_SINGLESTEP 51
+#define KVM_CAP_PPC_OSI 52
+#define KVM_CAP_PPC_UNSET_IRQ 53
+#define KVM_CAP_ENABLE_CAP 54
+#ifdef __KVM_HAVE_XSAVE
+#define KVM_CAP_XSAVE 55
+#endif
+#ifdef __KVM_HAVE_XCRS
+#define KVM_CAP_XCRS 56
+#endif
+#define KVM_CAP_PPC_GET_PVINFO 57
+#define KVM_CAP_PPC_IRQ_LEVEL 58
+#define KVM_CAP_ASYNC_PF 59
+#define KVM_CAP_TSC_CONTROL 60
+#define KVM_CAP_GET_TSC_KHZ 61
+#define KVM_CAP_PPC_BOOKE_SREGS 62
+
+#ifdef KVM_CAP_IRQ_ROUTING
+
+struct kvm_irq_routing_irqchip {
+ __u32 irqchip;
+ __u32 pin;
+};
+
+struct kvm_irq_routing_msi {
+ __u32 address_lo;
+ __u32 address_hi;
+ __u32 data;
+ __u32 pad;
+};
+
+/* gsi routing entry types */
+#define KVM_IRQ_ROUTING_IRQCHIP 1
+#define KVM_IRQ_ROUTING_MSI 2
+
+struct kvm_irq_routing_entry {
+ __u32 gsi;
+ __u32 type;
+ __u32 flags;
+ __u32 pad;
+ union {
+ struct kvm_irq_routing_irqchip irqchip;
+ struct kvm_irq_routing_msi msi;
+ __u32 pad[8];
+ } u;
+};
+
+struct kvm_irq_routing {
+ __u32 nr;
+ __u32 flags;
+ struct kvm_irq_routing_entry entries[0];
+};
+
+#endif
+
+#ifdef KVM_CAP_MCE
+/* x86 MCE */
+struct kvm_x86_mce {
+ __u64 status;
+ __u64 addr;
+ __u64 misc;
+ __u64 mcg_status;
+ __u8 bank;
+ __u8 pad1[7];
+ __u64 pad2[3];
+};
+#endif
+
+#ifdef KVM_CAP_XEN_HVM
+struct kvm_xen_hvm_config {
+ __u32 flags;
+ __u32 msr;
+ __u64 blob_addr_32;
+ __u64 blob_addr_64;
+ __u8 blob_size_32;
+ __u8 blob_size_64;
+ __u8 pad2[30];
+};
+#endif
+
+#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
+
+struct kvm_irqfd {
+ __u32 fd;
+ __u32 gsi;
+ __u32 flags;
+ __u8 pad[20];
+};
+
+struct kvm_clock_data {
+ __u64 clock;
+ __u32 flags;
+ __u32 pad[9];
+};
+
+/*
+ * ioctls for VM fds
+ */
+#define KVM_SET_MEMORY_REGION _IOW(KVMIO, 0x40, struct kvm_memory_region)
+/*
+ * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
+ * a vcpu fd.
+ */
+#define KVM_CREATE_VCPU _IO(KVMIO, 0x41)
+#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log)
+/* KVM_SET_MEMORY_ALIAS is obsolete: */
+#define KVM_SET_MEMORY_ALIAS _IOW(KVMIO, 0x43, struct kvm_memory_alias)
+#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44)
+#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45)
+#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
+ struct kvm_userspace_memory_region)
+#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47)
+#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64)
+/* Device model IOC */
+#define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60)
+#define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level)
+#define KVM_GET_IRQCHIP _IOWR(KVMIO, 0x62, struct kvm_irqchip)
+#define KVM_SET_IRQCHIP _IOR(KVMIO, 0x63, struct kvm_irqchip)
+#define KVM_CREATE_PIT _IO(KVMIO, 0x64)
+#define KVM_GET_PIT _IOWR(KVMIO, 0x65, struct kvm_pit_state)
+#define KVM_SET_PIT _IOR(KVMIO, 0x66, struct kvm_pit_state)
+#define KVM_IRQ_LINE_STATUS _IOWR(KVMIO, 0x67, struct kvm_irq_level)
+#define KVM_REGISTER_COALESCED_MMIO \
+ _IOW(KVMIO, 0x67, struct kvm_coalesced_mmio_zone)
+#define KVM_UNREGISTER_COALESCED_MMIO \
+ _IOW(KVMIO, 0x68, struct kvm_coalesced_mmio_zone)
+#define KVM_ASSIGN_PCI_DEVICE _IOR(KVMIO, 0x69, \
+ struct kvm_assigned_pci_dev)
+#define KVM_SET_GSI_ROUTING _IOW(KVMIO, 0x6a, struct kvm_irq_routing)
+/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
+#define KVM_ASSIGN_IRQ __KVM_DEPRECATED_VM_R_0x70
+#define KVM_ASSIGN_DEV_IRQ _IOW(KVMIO, 0x70, struct kvm_assigned_irq)
+#define KVM_REINJECT_CONTROL _IO(KVMIO, 0x71)
+#define KVM_DEASSIGN_PCI_DEVICE _IOW(KVMIO, 0x72, \
+ struct kvm_assigned_pci_dev)
+#define KVM_ASSIGN_SET_MSIX_NR _IOW(KVMIO, 0x73, \
+ struct kvm_assigned_msix_nr)
+#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO, 0x74, \
+ struct kvm_assigned_msix_entry)
+#define KVM_DEASSIGN_DEV_IRQ _IOW(KVMIO, 0x75, struct kvm_assigned_irq)
+#define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd)
+#define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config)
+#define KVM_SET_BOOT_CPU_ID _IO(KVMIO, 0x78)
+#define KVM_IOEVENTFD _IOW(KVMIO, 0x79, struct kvm_ioeventfd)
+#define KVM_XEN_HVM_CONFIG _IOW(KVMIO, 0x7a, struct kvm_xen_hvm_config)
+#define KVM_SET_CLOCK _IOW(KVMIO, 0x7b, struct kvm_clock_data)
+#define KVM_GET_CLOCK _IOR(KVMIO, 0x7c, struct kvm_clock_data)
+/* Available with KVM_CAP_PIT_STATE2 */
+#define KVM_GET_PIT2 _IOR(KVMIO, 0x9f, struct kvm_pit_state2)
+#define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2)
+/* Available with KVM_CAP_PPC_GET_PVINFO */
+#define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo)
+/* Available with KVM_CAP_TSC_CONTROL */
+#define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2)
+#define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3)
+
+/*
+ * ioctls for vcpu fds
+ */
+#define KVM_RUN _IO(KVMIO, 0x80)
+#define KVM_GET_REGS _IOR(KVMIO, 0x81, struct kvm_regs)
+#define KVM_SET_REGS _IOW(KVMIO, 0x82, struct kvm_regs)
+#define KVM_GET_SREGS _IOR(KVMIO, 0x83, struct kvm_sregs)
+#define KVM_SET_SREGS _IOW(KVMIO, 0x84, struct kvm_sregs)
+#define KVM_TRANSLATE _IOWR(KVMIO, 0x85, struct kvm_translation)
+#define KVM_INTERRUPT _IOW(KVMIO, 0x86, struct kvm_interrupt)
+/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
+#define KVM_DEBUG_GUEST __KVM_DEPRECATED_VCPU_W_0x87
+#define KVM_GET_MSRS _IOWR(KVMIO, 0x88, struct kvm_msrs)
+#define KVM_SET_MSRS _IOW(KVMIO, 0x89, struct kvm_msrs)
+#define KVM_SET_CPUID _IOW(KVMIO, 0x8a, struct kvm_cpuid)
+#define KVM_SET_SIGNAL_MASK _IOW(KVMIO, 0x8b, struct kvm_signal_mask)
+#define KVM_GET_FPU _IOR(KVMIO, 0x8c, struct kvm_fpu)
+#define KVM_SET_FPU _IOW(KVMIO, 0x8d, struct kvm_fpu)
+#define KVM_GET_LAPIC _IOR(KVMIO, 0x8e, struct kvm_lapic_state)
+#define KVM_SET_LAPIC _IOW(KVMIO, 0x8f, struct kvm_lapic_state)
+#define KVM_SET_CPUID2 _IOW(KVMIO, 0x90, struct kvm_cpuid2)
+#define KVM_GET_CPUID2 _IOWR(KVMIO, 0x91, struct kvm_cpuid2)
+/* Available with KVM_CAP_VAPIC */
+#define KVM_TPR_ACCESS_REPORTING _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl)
+/* Available with KVM_CAP_VAPIC */
+#define KVM_SET_VAPIC_ADDR _IOW(KVMIO, 0x93, struct kvm_vapic_addr)
+/* valid for virtual machine (for floating interrupt)_and_ vcpu */
+#define KVM_S390_INTERRUPT _IOW(KVMIO, 0x94, struct kvm_s390_interrupt)
+/* store status for s390 */
+#define KVM_S390_STORE_STATUS_NOADDR (-1ul)
+#define KVM_S390_STORE_STATUS_PREFIXED (-2ul)
+#define KVM_S390_STORE_STATUS _IOW(KVMIO, 0x95, unsigned long)
+/* initial ipl psw for s390 */
+#define KVM_S390_SET_INITIAL_PSW _IOW(KVMIO, 0x96, struct kvm_s390_psw)
+/* initial reset for s390 */
+#define KVM_S390_INITIAL_RESET _IO(KVMIO, 0x97)
+#define KVM_GET_MP_STATE _IOR(KVMIO, 0x98, struct kvm_mp_state)
+#define KVM_SET_MP_STATE _IOW(KVMIO, 0x99, struct kvm_mp_state)
+/* Available with KVM_CAP_NMI */
+#define KVM_NMI _IO(KVMIO, 0x9a)
+/* Available with KVM_CAP_SET_GUEST_DEBUG */
+#define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug)
+/* MCE for x86 */
+#define KVM_X86_SETUP_MCE _IOW(KVMIO, 0x9c, __u64)
+#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO, 0x9d, __u64)
+#define KVM_X86_SET_MCE _IOW(KVMIO, 0x9e, struct kvm_x86_mce)
+/* IA64 stack access */
+#define KVM_IA64_VCPU_GET_STACK _IOR(KVMIO, 0x9a, void *)
+#define KVM_IA64_VCPU_SET_STACK _IOW(KVMIO, 0x9b, void *)
+/* Available with KVM_CAP_VCPU_EVENTS */
+#define KVM_GET_VCPU_EVENTS _IOR(KVMIO, 0x9f, struct kvm_vcpu_events)
+#define KVM_SET_VCPU_EVENTS _IOW(KVMIO, 0xa0, struct kvm_vcpu_events)
+/* Available with KVM_CAP_DEBUGREGS */
+#define KVM_GET_DEBUGREGS _IOR(KVMIO, 0xa1, struct kvm_debugregs)
+#define KVM_SET_DEBUGREGS _IOW(KVMIO, 0xa2, struct kvm_debugregs)
+#define KVM_ENABLE_CAP _IOW(KVMIO, 0xa3, struct kvm_enable_cap)
+/* Available with KVM_CAP_XSAVE */
+#define KVM_GET_XSAVE _IOR(KVMIO, 0xa4, struct kvm_xsave)
+#define KVM_SET_XSAVE _IOW(KVMIO, 0xa5, struct kvm_xsave)
+/* Available with KVM_CAP_XCRS */
+#define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs)
+#define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs)
+
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
+
+struct kvm_assigned_pci_dev {
+ __u32 assigned_dev_id;
+ __u32 busnr;
+ __u32 devfn;
+ __u32 flags;
+ __u32 segnr;
+ union {
+ __u32 reserved[11];
+ };
+};
+
+#define KVM_DEV_IRQ_HOST_INTX (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10)
+
+#define KVM_DEV_IRQ_HOST_MASK 0x00ff
+#define KVM_DEV_IRQ_GUEST_MASK 0xff00
+
+struct kvm_assigned_irq {
+ __u32 assigned_dev_id;
+ __u32 host_irq;
+ __u32 guest_irq;
+ __u32 flags;
+ union {
+ struct {
+ __u32 addr_lo;
+ __u32 addr_hi;
+ __u32 data;
+ } guest_msi;
+ __u32 reserved[12];
+ };
+};
+
+
+struct kvm_assigned_msix_nr {
+ __u32 assigned_dev_id;
+ __u16 entry_nr;
+ __u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV 256
+struct kvm_assigned_msix_entry {
+ __u32 assigned_dev_id;
+ __u32 gsi;
+ __u16 entry; /* The index of entry in the MSI-X table */
+ __u16 padding[3];
+};
+
+#endif /* __LINUX_KVM_H */
--git a/linux-headers/linux/kvm_para.h b/linux-headers/linux/kvm_para.h
new file mode 100644
index 0000000..b315e27
--- /dev/null
+++ b/linux-headers/linux/kvm_para.h
@@ -0,0 +1,29 @@
+#ifndef __LINUX_KVM_PARA_H
+#define __LINUX_KVM_PARA_H
+
+/*
+ * This header file provides a method for making a hypercall to the host
+ * Architectures should define:
+ * - kvm_hypercall0, kvm_hypercall1...
+ * - kvm_arch_para_features
+ * - kvm_para_available
+ */
+
+/* Return values for hypercalls */
+#define KVM_ENOSYS 1000
+#define KVM_EFAULT EFAULT
+#define KVM_E2BIG E2BIG
+#define KVM_EPERM EPERM
+
+#define KVM_HC_VAPIC_POLL_IRQ 1
+#define KVM_HC_MMU_OP 2
+#define KVM_HC_FEATURES 3
+#define KVM_HC_PPC_MAP_MAGIC_PAGE 4
+
+/*
+ * hypercalls use architecture specific
+ */
+#include <asm/kvm_para.h>
+
+#endif /* __LINUX_KVM_PARA_H */
+
--git a/linux-headers/linux/vhost.h b/linux-headers/linux/vhost.h
new file mode 100644
index 0000000..165a484
--- /dev/null
+++ b/linux-headers/linux/vhost.h
@@ -0,0 +1,130 @@
+#ifndef _LINUX_VHOST_H
+#define _LINUX_VHOST_H
+/* Userspace interface for in-kernel virtio accelerators. */
+
+/* vhost is used to reduce the number of system calls involved in virtio.
+ *
+ * Existing virtio net code is used in the guest without modification.
+ *
+ * This header includes interface used by userspace hypervisor for
+ * device configuration.
+ */
+
+#include <linux/types.h>
+
+#include <linux/ioctl.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+
+struct vhost_vring_state {
+ unsigned int index;
+ unsigned int num;
+};
+
+struct vhost_vring_file {
+ unsigned int index;
+ int fd; /* Pass -1 to unbind from file. */
+
+};
+
+struct vhost_vring_addr {
+ unsigned int index;
+ /* Option flags. */
+ unsigned int flags;
+ /* Flag values: */
+ /* Whether log address is valid. If set enables logging. */
+#define VHOST_VRING_F_LOG 0
+
+ /* Start of array of descriptors (virtually contiguous) */
+ __u64 desc_user_addr;
+ /* Used structure address. Must be 32 bit aligned */
+ __u64 used_user_addr;
+ /* Available structure address. Must be 16 bit aligned */
+ __u64 avail_user_addr;
+ /* Logging support. */
+ /* Log writes to used structure, at offset calculated from specified
+ * address. Address must be 32 bit aligned. */
+ __u64 log_guest_addr;
+};
+
+struct vhost_memory_region {
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+ __u64 userspace_addr;
+ __u64 flags_padding; /* No flags are currently specified. */
+};
+
+/* All region addresses and sizes must be 4K aligned. */
+#define VHOST_PAGE_SIZE 0x1000
+
+struct vhost_memory {
+ __u32 nregions;
+ __u32 padding;
+ struct vhost_memory_region regions[0];
+};
+
+/* ioctls */
+
+#define VHOST_VIRTIO 0xAF
+
+/* Features bitmask for forward compatibility. Transport bits are used for
+ * vhost specific features. */
+#define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64)
+#define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64)
+
+/* Set current process as the (exclusive) owner of this file descriptor. This
+ * must be called before any other vhost command. Further calls to
+ * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
+#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
+/* Give up ownership, and reset the device to default values.
+ * Allows subsequent call to VHOST_OWNER_SET to succeed. */
+#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
+
+/* Set up/modify memory layout */
+#define VHOST_SET_MEM_TABLE _IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
+
+/* Write logging setup. */
+/* Memory writes can optionally be logged by setting bit at an offset
+ * (calculated from the physical address) from specified log base.
+ * The bit is set using an atomic 32 bit operation. */
+/* Set base address for logging. */
+#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
+/* Specify an eventfd file descriptor to signal on log write. */
+#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
+
+/* Ring setup. */
+/* Set number of descriptors in ring. This parameter can not
+ * be modified while ring is running (bound to a device). */
+#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
+/* Set addresses for the ring. */
+#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
+/* Base value where queue looks for available descriptors */
+#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+/* Get accessor: reads index, writes value in num */
+#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+
+/* The following ioctls use eventfd file descriptors to signal and poll
+ * for events. */
+
+/* Set eventfd to poll for added buffers */
+#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
+/* Set eventfd to signal when buffers have beed used */
+#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
+/* Set eventfd to signal an error */
+#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
+
+/* VHOST_NET specific defines */
+
+/* Attach virtio net ring to a raw socket, or tap device.
+ * The socket must be already bound to an ethernet device, this device will be
+ * used for transmit. Pass fd -1 to unbind from the socket and the transmit
+ * device. This can be used to stop the ring (e.g. for migration). */
+#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
+
+/* Feature bits */
+/* Log all write descriptors. Can be changed while device is active. */
+#define VHOST_F_LOG_ALL 26
+/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
+#define VHOST_NET_F_VIRTIO_NET_HDR 27
+
+#endif
--git a/linux-headers/linux/virtio_config.h b/linux-headers/linux/virtio_config.h
new file mode 100644
index 0000000..4f51d8f
--- /dev/null
+++ b/linux-headers/linux/virtio_config.h
@@ -0,0 +1,54 @@
+#ifndef _LINUX_VIRTIO_CONFIG_H
+#define _LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+/* Virtio devices use a standardized configuration space to define their
+ * features and pass configuration information, but each implementation can
+ * store and access that space differently. */
+#include <linux/types.h>
+
+/* Status byte for guest to report progress, and synchronize features. */
+/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
+#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1
+/* We have found a driver for the device. */
+#define VIRTIO_CONFIG_S_DRIVER 2
+/* Driver has used its parts of the config, and is happy */
+#define VIRTIO_CONFIG_S_DRIVER_OK 4
+/* We've given up on this device. */
+#define VIRTIO_CONFIG_S_FAILED 0x80
+
+/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START 28
+#define VIRTIO_TRANSPORT_F_END 32
+
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY 24
+
+#endif /* _LINUX_VIRTIO_CONFIG_H */
--git a/linux-headers/linux/virtio_ring.h b/linux-headers/linux/virtio_ring.h
new file mode 100644
index 0000000..78289ee
--- /dev/null
+++ b/linux-headers/linux/virtio_ring.h
@@ -0,0 +1,163 @@
+#ifndef _LINUX_VIRTIO_RING_H
+#define _LINUX_VIRTIO_RING_H
+/* An interface for efficient virtio implementation, currently for use by KVM
+ * and lguest, but hopefully others soon. Do NOT change this since it will
+ * break existing servers and clients.
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright Rusty Russell IBM Corporation 2007. */
+#include <linux/types.h>
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT 1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE 2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT 4
+
+/* The Host uses this in used->flags to advise the Guest: don't kick me when
+ * you add a buffer. It's unreliable, so it's simply an optimization. Guest
+ * will still kick if it's out of buffers. */
+#define VRING_USED_F_NO_NOTIFY 1
+/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
+ * when you consume a buffer. It's unreliable, so it's simply an
+ * optimization. */
+#define VRING_AVAIL_F_NO_INTERRUPT 1
+
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC 28
+
+/* The Guest publishes the used index for which it expects an interrupt
+ * at the end of the avail ring. Host should ignore the avail->flags field. */
+/* The Host publishes the avail index for which it expects a kick
+ * at the end of the used ring. Guest should ignore the used->flags field. */
+#define VIRTIO_RING_F_EVENT_IDX 29
+
+/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */
+struct vring_desc {
+ /* Address (guest-physical). */
+ __u64 addr;
+ /* Length. */
+ __u32 len;
+ /* The flags as indicated above. */
+ __u16 flags;
+ /* We chain unused descriptors via this, too */
+ __u16 next;
+};
+
+struct vring_avail {
+ __u16 flags;
+ __u16 idx;
+ __u16 ring[];
+};
+
+/* u32 is used here for ids for padding reasons. */
+struct vring_used_elem {
+ /* Index of start of used descriptor chain. */
+ __u32 id;
+ /* Total length of the descriptor chain which was used (written to) */
+ __u32 len;
+};
+
+struct vring_used {
+ __u16 flags;
+ __u16 idx;
+ struct vring_used_elem ring[];
+};
+
+struct vring {
+ unsigned int num;
+
+ struct vring_desc *desc;
+
+ struct vring_avail *avail;
+
+ struct vring_used *used;
+};
+
+/* The standard layout for the ring is a continuous chunk of memory which looks
+ * like this. We assume num is a power of 2.
+ *
+ * struct vring
+ * {
+ * // The actual descriptors (16 bytes each)
+ * struct vring_desc desc[num];
+ *
+ * // A ring of available descriptor heads with free-running index.
+ * __u16 avail_flags;
+ * __u16 avail_idx;
+ * __u16 available[num];
+ * __u16 used_event_idx;
+ *
+ * // Padding to the next align boundary.
+ * char pad[];
+ *
+ * // A ring of used descriptor heads with free-running index.
+ * __u16 used_flags;
+ * __u16 used_idx;
+ * struct vring_used_elem used[num];
+ * __u16 avail_event_idx;
+ * };
+ */
+/* We publish the used event index at the end of the available ring, and vice
+ * versa. They are at the end for backwards compatibility. */
+#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
+#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
+
+static __inline__ void vring_init(struct vring *vr, unsigned int num, void *p,
+ unsigned long align)
+{
+ vr->num = num;
+ vr->desc = p;
+ vr->avail = p + num*sizeof(struct vring_desc);
+ vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + align-1)
+ & ~(align - 1));
+}
+
+static __inline__ unsigned vring_size(unsigned int num, unsigned long align)
+{
+ return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (2 + num)
+ + align - 1) & ~(align - 1))
+ + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
+}
+
+/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
+/* Assuming a given event_idx value from the other size, if
+ * we have just incremented index from old to new_idx,
+ * should we trigger an event? */
+static __inline__ int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
+{
+ /* Note: Xen has similar logic for notification hold-off
+ * in include/xen/interface/io/ring.h with req_event and req_prod
+ * corresponding to event_idx + 1 and new_idx respectively.
+ * Note also that req_event and req_prod in Xen start at 1,
+ * event indexes in virtio start at 0. */
+ return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
+}
+
+#endif /* _LINUX_VIRTIO_RING_H */
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 02/12] Import kernel headers
@ 2011-06-08 14:10 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm, Alexander Graf
These kernel headers and the COPYING file were automatically imported
from current Linux git, cb0a02ecf9 (post 3.0-rc2).
Licensing:
asm-powerpc GPLv2
asm-s390 GPLv2
asm-x86 Linux top-level license (GPLv2 with exception)
linux/kvm*: Linux top-level license (GPLv2 with exception)
linux/vhost: Linux top-level license (GPLv2 with exception)
linux/virtio*: 3-clause BSB
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
| 356 +++++++++++++++
| 275 ++++++++++++
| 53 +++
| 44 ++
| 17 +
| 193 ++++++++
| 324 ++++++++++++++
| 79 ++++
| 804 ++++++++++++++++++++++++++++++++++
| 29 ++
| 130 ++++++
| 54 +++
| 163 +++++++
13 files changed, 2521 insertions(+), 0 deletions(-)
create mode 100644 linux-headers/COPYING
create mode 100644 linux-headers/asm-powerpc/kvm.h
create mode 100644 linux-headers/asm-powerpc/kvm_para.h
create mode 100644 linux-headers/asm-s390/kvm.h
create mode 100644 linux-headers/asm-s390/kvm_para.h
create mode 100644 linux-headers/asm-x86/hyperv.h
create mode 100644 linux-headers/asm-x86/kvm.h
create mode 100644 linux-headers/asm-x86/kvm_para.h
create mode 100644 linux-headers/linux/kvm.h
create mode 100644 linux-headers/linux/kvm_para.h
create mode 100644 linux-headers/linux/vhost.h
create mode 100644 linux-headers/linux/virtio_config.h
create mode 100644 linux-headers/linux/virtio_ring.h
--git a/linux-headers/COPYING b/linux-headers/COPYING
new file mode 100644
index 0000000..ca442d3
--- /dev/null
+++ b/linux-headers/COPYING
@@ -0,0 +1,356 @@
+
+ NOTE! This copyright does *not* cover user programs that use kernel
+ services by normal system calls - this is merely considered normal use
+ of the kernel, and does *not* fall under the heading of "derived work".
+ Also note that the GPL below is copyrighted by the Free Software
+ Foundation, but the instance of code that it refers to (the Linux
+ kernel) is copyrighted by me and others who actually wrote it.
+
+ Also note that the only valid version of the GPL as far as the kernel
+ is concerned is _this_ particular version of the license (ie v2, not
+ v2.2 or v3.x or whatever), unless explicitly otherwise stated.
+
+ Linus Torvalds
+
+----------------------------------------
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+\f
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+\f
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+\f
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+\f
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
--git a/linux-headers/asm-powerpc/kvm.h b/linux-headers/asm-powerpc/kvm.h
new file mode 100644
index 0000000..d2ca5ed
--- /dev/null
+++ b/linux-headers/asm-powerpc/kvm.h
@@ -0,0 +1,275 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __LINUX_KVM_POWERPC_H
+#define __LINUX_KVM_POWERPC_H
+
+#include <linux/types.h>
+
+struct kvm_regs {
+ __u64 pc;
+ __u64 cr;
+ __u64 ctr;
+ __u64 lr;
+ __u64 xer;
+ __u64 msr;
+ __u64 srr0;
+ __u64 srr1;
+ __u64 pid;
+
+ __u64 sprg0;
+ __u64 sprg1;
+ __u64 sprg2;
+ __u64 sprg3;
+ __u64 sprg4;
+ __u64 sprg5;
+ __u64 sprg6;
+ __u64 sprg7;
+
+ __u64 gpr[32];
+};
+
+#define KVM_SREGS_E_IMPL_NONE 0
+#define KVM_SREGS_E_IMPL_FSL 1
+
+#define KVM_SREGS_E_FSL_PIDn (1 << 0) /* PID1/PID2 */
+
+/*
+ * Feature bits indicate which sections of the sregs struct are valid,
+ * both in KVM_GET_SREGS and KVM_SET_SREGS. On KVM_SET_SREGS, registers
+ * corresponding to unset feature bits will not be modified. This allows
+ * restoring a checkpoint made without that feature, while keeping the
+ * default values of the new registers.
+ *
+ * KVM_SREGS_E_BASE contains:
+ * CSRR0/1 (refers to SRR2/3 on 40x)
+ * ESR
+ * DEAR
+ * MCSR
+ * TSR
+ * TCR
+ * DEC
+ * TB
+ * VRSAVE (USPRG0)
+ */
+#define KVM_SREGS_E_BASE (1 << 0)
+
+/*
+ * KVM_SREGS_E_ARCH206 contains:
+ *
+ * PIR
+ * MCSRR0/1
+ * DECAR
+ * IVPR
+ */
+#define KVM_SREGS_E_ARCH206 (1 << 1)
+
+/*
+ * Contains EPCR, plus the upper half of 64-bit registers
+ * that are 32-bit on 32-bit implementations.
+ */
+#define KVM_SREGS_E_64 (1 << 2)
+
+#define KVM_SREGS_E_SPRG8 (1 << 3)
+#define KVM_SREGS_E_MCIVPR (1 << 4)
+
+/*
+ * IVORs are used -- contains IVOR0-15, plus additional IVORs
+ * in combination with an appropriate feature bit.
+ */
+#define KVM_SREGS_E_IVOR (1 << 5)
+
+/*
+ * Contains MAS0-4, MAS6-7, TLBnCFG, MMUCFG.
+ * Also TLBnPS if MMUCFG[MAVN] = 1.
+ */
+#define KVM_SREGS_E_ARCH206_MMU (1 << 6)
+
+/* DBSR, DBCR, IAC, DAC, DVC */
+#define KVM_SREGS_E_DEBUG (1 << 7)
+
+/* Enhanced debug -- DSRR0/1, SPRG9 */
+#define KVM_SREGS_E_ED (1 << 8)
+
+/* Embedded Floating Point (SPE) -- IVOR32-34 if KVM_SREGS_E_IVOR */
+#define KVM_SREGS_E_SPE (1 << 9)
+
+/* External Proxy (EXP) -- EPR */
+#define KVM_SREGS_EXP (1 << 10)
+
+/* External PID (E.PD) -- EPSC/EPLC */
+#define KVM_SREGS_E_PD (1 << 11)
+
+/* Processor Control (E.PC) -- IVOR36-37 if KVM_SREGS_E_IVOR */
+#define KVM_SREGS_E_PC (1 << 12)
+
+/* Page table (E.PT) -- EPTCFG */
+#define KVM_SREGS_E_PT (1 << 13)
+
+/* Embedded Performance Monitor (E.PM) -- IVOR35 if KVM_SREGS_E_IVOR */
+#define KVM_SREGS_E_PM (1 << 14)
+
+/*
+ * Special updates:
+ *
+ * Some registers may change even while a vcpu is not running.
+ * To avoid losing these changes, by default these registers are
+ * not updated by KVM_SET_SREGS. To force an update, set the bit
+ * in u.e.update_special corresponding to the register to be updated.
+ *
+ * The update_special field is zero on return from KVM_GET_SREGS.
+ *
+ * When restoring a checkpoint, the caller can set update_special
+ * to 0xffffffff to ensure that everything is restored, even new features
+ * that the caller doesn't know about.
+ */
+#define KVM_SREGS_E_UPDATE_MCSR (1 << 0)
+#define KVM_SREGS_E_UPDATE_TSR (1 << 1)
+#define KVM_SREGS_E_UPDATE_DEC (1 << 2)
+#define KVM_SREGS_E_UPDATE_DBSR (1 << 3)
+
+/*
+ * In KVM_SET_SREGS, reserved/pad fields must be left untouched from a
+ * previous KVM_GET_REGS.
+ *
+ * Unless otherwise indicated, setting any register with KVM_SET_SREGS
+ * directly sets its value. It does not trigger any special semantics such
+ * as write-one-to-clear. Calling KVM_SET_SREGS on an unmodified struct
+ * just received from KVM_GET_SREGS is always a no-op.
+ */
+struct kvm_sregs {
+ __u32 pvr;
+ union {
+ struct {
+ __u64 sdr1;
+ struct {
+ struct {
+ __u64 slbe;
+ __u64 slbv;
+ } slb[64];
+ } ppc64;
+ struct {
+ __u32 sr[16];
+ __u64 ibat[8];
+ __u64 dbat[8];
+ } ppc32;
+ } s;
+ struct {
+ union {
+ struct { /* KVM_SREGS_E_IMPL_FSL */
+ __u32 features; /* KVM_SREGS_E_FSL_ */
+ __u32 svr;
+ __u64 mcar;
+ __u32 hid0;
+
+ /* KVM_SREGS_E_FSL_PIDn */
+ __u32 pid1, pid2;
+ } fsl;
+ __u8 pad[256];
+ } impl;
+
+ __u32 features; /* KVM_SREGS_E_ */
+ __u32 impl_id; /* KVM_SREGS_E_IMPL_ */
+ __u32 update_special; /* KVM_SREGS_E_UPDATE_ */
+ __u32 pir; /* read-only */
+ __u64 sprg8;
+ __u64 sprg9; /* E.ED */
+ __u64 csrr0;
+ __u64 dsrr0; /* E.ED */
+ __u64 mcsrr0;
+ __u32 csrr1;
+ __u32 dsrr1; /* E.ED */
+ __u32 mcsrr1;
+ __u32 esr;
+ __u64 dear;
+ __u64 ivpr;
+ __u64 mcivpr;
+ __u64 mcsr; /* KVM_SREGS_E_UPDATE_MCSR */
+
+ __u32 tsr; /* KVM_SREGS_E_UPDATE_TSR */
+ __u32 tcr;
+ __u32 decar;
+ __u32 dec; /* KVM_SREGS_E_UPDATE_DEC */
+
+ /*
+ * Userspace can read TB directly, but the
+ * value reported here is consistent with "dec".
+ *
+ * Read-only.
+ */
+ __u64 tb;
+
+ __u32 dbsr; /* KVM_SREGS_E_UPDATE_DBSR */
+ __u32 dbcr[3];
+ __u32 iac[4];
+ __u32 dac[2];
+ __u32 dvc[2];
+ __u8 num_iac; /* read-only */
+ __u8 num_dac; /* read-only */
+ __u8 num_dvc; /* read-only */
+ __u8 pad;
+
+ __u32 epr; /* EXP */
+ __u32 vrsave; /* a.k.a. USPRG0 */
+ __u32 epcr; /* KVM_SREGS_E_64 */
+
+ __u32 mas0;
+ __u32 mas1;
+ __u64 mas2;
+ __u64 mas7_3;
+ __u32 mas4;
+ __u32 mas6;
+
+ __u32 ivor_low[16]; /* IVOR0-15 */
+ __u32 ivor_high[18]; /* IVOR32+, plus room to expand */
+
+ __u32 mmucfg; /* read-only */
+ __u32 eptcfg; /* E.PT, read-only */
+ __u32 tlbcfg[4];/* read-only */
+ __u32 tlbps[4]; /* read-only */
+
+ __u32 eplc, epsc; /* E.PD */
+ } e;
+ __u8 pad[1020];
+ } u;
+};
+
+struct kvm_fpu {
+ __u64 fpr[32];
+};
+
+struct kvm_debug_exit_arch {
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
+#define KVM_REG_MASK 0x001f
+#define KVM_REG_EXT_MASK 0xffe0
+#define KVM_REG_GPR 0x0000
+#define KVM_REG_FPR 0x0020
+#define KVM_REG_QPR 0x0040
+#define KVM_REG_FQPR 0x0060
+
+#define KVM_INTERRUPT_SET -1U
+#define KVM_INTERRUPT_UNSET -2U
+#define KVM_INTERRUPT_SET_LEVEL -3U
+
+#endif /* __LINUX_KVM_POWERPC_H */
--git a/linux-headers/asm-powerpc/kvm_para.h b/linux-headers/asm-powerpc/kvm_para.h
new file mode 100644
index 0000000..ad58c90
--- /dev/null
+++ b/linux-headers/asm-powerpc/kvm_para.h
@@ -0,0 +1,53 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_PARA_H__
+#define __POWERPC_KVM_PARA_H__
+
+#include <linux/types.h>
+
+struct kvm_vcpu_arch_shared {
+ __u64 scratch1;
+ __u64 scratch2;
+ __u64 scratch3;
+ __u64 critical; /* Guest may not get interrupts if == r1 */
+ __u64 sprg0;
+ __u64 sprg1;
+ __u64 sprg2;
+ __u64 sprg3;
+ __u64 srr0;
+ __u64 srr1;
+ __u64 dar;
+ __u64 msr;
+ __u32 dsisr;
+ __u32 int_pending; /* Tells the guest if we have an interrupt */
+ __u32 sr[16];
+};
+
+#define KVM_SC_MAGIC_R0 0x4b564d21 /* "KVM!" */
+#define HC_VENDOR_KVM (42 << 16)
+#define HC_EV_SUCCESS 0
+#define HC_EV_UNIMPLEMENTED 12
+
+#define KVM_FEATURE_MAGIC_PAGE 1
+
+#define KVM_MAGIC_FEAT_SR (1 << 0)
+
+
+#endif /* __POWERPC_KVM_PARA_H__ */
--git a/linux-headers/asm-s390/kvm.h b/linux-headers/asm-s390/kvm.h
new file mode 100644
index 0000000..82b32a1
--- /dev/null
+++ b/linux-headers/asm-s390/kvm.h
@@ -0,0 +1,44 @@
+#ifndef __LINUX_KVM_S390_H
+#define __LINUX_KVM_S390_H
+/*
+ * asm-s390/kvm.h - KVM s390 specific structures and definitions
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * Author(s): Carsten Otte <cotte@de.ibm.com>
+ * Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+#include <linux/types.h>
+
+#define __KVM_S390
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+ /* general purpose regs for s390 */
+ __u64 gprs[16];
+};
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+ __u32 acrs[16];
+ __u64 crs[16];
+};
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u32 fpc;
+ __u64 fprs[16];
+};
+
+struct kvm_debug_exit_arch {
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
+#endif
--git a/linux-headers/asm-s390/kvm_para.h b/linux-headers/asm-s390/kvm_para.h
new file mode 100644
index 0000000..8e2dd67
--- /dev/null
+++ b/linux-headers/asm-s390/kvm_para.h
@@ -0,0 +1,17 @@
+/*
+ * asm-s390/kvm_para.h - definition for paravirtual devices on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+
+#ifndef __S390_KVM_PARA_H
+#define __S390_KVM_PARA_H
+
+
+#endif /* __S390_KVM_PARA_H */
--git a/linux-headers/asm-x86/hyperv.h b/linux-headers/asm-x86/hyperv.h
new file mode 100644
index 0000000..5df477a
--- /dev/null
+++ b/linux-headers/asm-x86/hyperv.h
@@ -0,0 +1,193 @@
+#ifndef _ASM_X86_HYPERV_H
+#define _ASM_X86_HYPERV_H
+
+#include <linux/types.h>
+
+/*
+ * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
+ * is set by CPUID(HvCpuIdFunctionVersionAndFeatures).
+ */
+#define HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS 0x40000000
+#define HYPERV_CPUID_INTERFACE 0x40000001
+#define HYPERV_CPUID_VERSION 0x40000002
+#define HYPERV_CPUID_FEATURES 0x40000003
+#define HYPERV_CPUID_ENLIGHTMENT_INFO 0x40000004
+#define HYPERV_CPUID_IMPLEMENT_LIMITS 0x40000005
+
+#define HYPERV_HYPERVISOR_PRESENT_BIT 0x80000000
+#define HYPERV_CPUID_MIN 0x40000005
+#define HYPERV_CPUID_MAX 0x4000ffff
+
+/*
+ * Feature identification. EAX indicates which features are available
+ * to the partition based upon the current partition privileges.
+ */
+
+/* VP Runtime (HV_X64_MSR_VP_RUNTIME) available */
+#define HV_X64_MSR_VP_RUNTIME_AVAILABLE (1 << 0)
+/* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
+#define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE (1 << 1)
+/*
+ * Basic SynIC MSRs (HV_X64_MSR_SCONTROL through HV_X64_MSR_EOM
+ * and HV_X64_MSR_SINT0 through HV_X64_MSR_SINT15) available
+ */
+#define HV_X64_MSR_SYNIC_AVAILABLE (1 << 2)
+/*
+ * Synthetic Timer MSRs (HV_X64_MSR_STIMER0_CONFIG through
+ * HV_X64_MSR_STIMER3_COUNT) available
+ */
+#define HV_X64_MSR_SYNTIMER_AVAILABLE (1 << 3)
+/*
+ * APIC access MSRs (HV_X64_MSR_EOI, HV_X64_MSR_ICR and HV_X64_MSR_TPR)
+ * are available
+ */
+#define HV_X64_MSR_APIC_ACCESS_AVAILABLE (1 << 4)
+/* Hypercall MSRs (HV_X64_MSR_GUEST_OS_ID and HV_X64_MSR_HYPERCALL) available*/
+#define HV_X64_MSR_HYPERCALL_AVAILABLE (1 << 5)
+/* Access virtual processor index MSR (HV_X64_MSR_VP_INDEX) available*/
+#define HV_X64_MSR_VP_INDEX_AVAILABLE (1 << 6)
+/* Virtual system reset MSR (HV_X64_MSR_RESET) is available*/
+#define HV_X64_MSR_RESET_AVAILABLE (1 << 7)
+ /*
+ * Access statistics pages MSRs (HV_X64_MSR_STATS_PARTITION_RETAIL_PAGE,
+ * HV_X64_MSR_STATS_PARTITION_INTERNAL_PAGE, HV_X64_MSR_STATS_VP_RETAIL_PAGE,
+ * HV_X64_MSR_STATS_VP_INTERNAL_PAGE) available
+ */
+#define HV_X64_MSR_STAT_PAGES_AVAILABLE (1 << 8)
+
+/*
+ * Feature identification: EBX indicates which flags were specified at
+ * partition creation. The format is the same as the partition creation
+ * flag structure defined in section Partition Creation Flags.
+ */
+#define HV_X64_CREATE_PARTITIONS (1 << 0)
+#define HV_X64_ACCESS_PARTITION_ID (1 << 1)
+#define HV_X64_ACCESS_MEMORY_POOL (1 << 2)
+#define HV_X64_ADJUST_MESSAGE_BUFFERS (1 << 3)
+#define HV_X64_POST_MESSAGES (1 << 4)
+#define HV_X64_SIGNAL_EVENTS (1 << 5)
+#define HV_X64_CREATE_PORT (1 << 6)
+#define HV_X64_CONNECT_PORT (1 << 7)
+#define HV_X64_ACCESS_STATS (1 << 8)
+#define HV_X64_DEBUGGING (1 << 11)
+#define HV_X64_CPU_POWER_MANAGEMENT (1 << 12)
+#define HV_X64_CONFIGURE_PROFILER (1 << 13)
+
+/*
+ * Feature identification. EDX indicates which miscellaneous features
+ * are available to the partition.
+ */
+/* The MWAIT instruction is available (per section MONITOR / MWAIT) */
+#define HV_X64_MWAIT_AVAILABLE (1 << 0)
+/* Guest debugging support is available */
+#define HV_X64_GUEST_DEBUGGING_AVAILABLE (1 << 1)
+/* Performance Monitor support is available*/
+#define HV_X64_PERF_MONITOR_AVAILABLE (1 << 2)
+/* Support for physical CPU dynamic partitioning events is available*/
+#define HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE (1 << 3)
+/*
+ * Support for passing hypercall input parameter block via XMM
+ * registers is available
+ */
+#define HV_X64_HYPERCALL_PARAMS_XMM_AVAILABLE (1 << 4)
+/* Support for a virtual guest idle state is available */
+#define HV_X64_GUEST_IDLE_STATE_AVAILABLE (1 << 5)
+
+/*
+ * Implementation recommendations. Indicates which behaviors the hypervisor
+ * recommends the OS implement for optimal performance.
+ */
+ /*
+ * Recommend using hypercall for address space switches rather
+ * than MOV to CR3 instruction
+ */
+#define HV_X64_MWAIT_RECOMMENDED (1 << 0)
+/* Recommend using hypercall for local TLB flushes rather
+ * than INVLPG or MOV to CR3 instructions */
+#define HV_X64_LOCAL_TLB_FLUSH_RECOMMENDED (1 << 1)
+/*
+ * Recommend using hypercall for remote TLB flushes rather
+ * than inter-processor interrupts
+ */
+#define HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED (1 << 2)
+/*
+ * Recommend using MSRs for accessing APIC registers
+ * EOI, ICR and TPR rather than their memory-mapped counterparts
+ */
+#define HV_X64_APIC_ACCESS_RECOMMENDED (1 << 3)
+/* Recommend using the hypervisor-provided MSR to initiate a system RESET */
+#define HV_X64_SYSTEM_RESET_RECOMMENDED (1 << 4)
+/*
+ * Recommend using relaxed timing for this partition. If used,
+ * the VM should disable any watchdog timeouts that rely on the
+ * timely delivery of external interrupts
+ */
+#define HV_X64_RELAXED_TIMING_RECOMMENDED (1 << 5)
+
+/* MSR used to identify the guest OS. */
+#define HV_X64_MSR_GUEST_OS_ID 0x40000000
+
+/* MSR used to setup pages used to communicate with the hypervisor. */
+#define HV_X64_MSR_HYPERCALL 0x40000001
+
+/* MSR used to provide vcpu index */
+#define HV_X64_MSR_VP_INDEX 0x40000002
+
+/* MSR used to read the per-partition time reference counter */
+#define HV_X64_MSR_TIME_REF_COUNT 0x40000020
+
+/* Define the virtual APIC registers */
+#define HV_X64_MSR_EOI 0x40000070
+#define HV_X64_MSR_ICR 0x40000071
+#define HV_X64_MSR_TPR 0x40000072
+#define HV_X64_MSR_APIC_ASSIST_PAGE 0x40000073
+
+/* Define synthetic interrupt controller model specific registers. */
+#define HV_X64_MSR_SCONTROL 0x40000080
+#define HV_X64_MSR_SVERSION 0x40000081
+#define HV_X64_MSR_SIEFP 0x40000082
+#define HV_X64_MSR_SIMP 0x40000083
+#define HV_X64_MSR_EOM 0x40000084
+#define HV_X64_MSR_SINT0 0x40000090
+#define HV_X64_MSR_SINT1 0x40000091
+#define HV_X64_MSR_SINT2 0x40000092
+#define HV_X64_MSR_SINT3 0x40000093
+#define HV_X64_MSR_SINT4 0x40000094
+#define HV_X64_MSR_SINT5 0x40000095
+#define HV_X64_MSR_SINT6 0x40000096
+#define HV_X64_MSR_SINT7 0x40000097
+#define HV_X64_MSR_SINT8 0x40000098
+#define HV_X64_MSR_SINT9 0x40000099
+#define HV_X64_MSR_SINT10 0x4000009A
+#define HV_X64_MSR_SINT11 0x4000009B
+#define HV_X64_MSR_SINT12 0x4000009C
+#define HV_X64_MSR_SINT13 0x4000009D
+#define HV_X64_MSR_SINT14 0x4000009E
+#define HV_X64_MSR_SINT15 0x4000009F
+
+
+#define HV_X64_MSR_HYPERCALL_ENABLE 0x00000001
+#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT 12
+#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_MASK \
+ (~((1ull << HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT) - 1))
+
+/* Declare the various hypercall operations. */
+#define HV_X64_HV_NOTIFY_LONG_SPIN_WAIT 0x0008
+
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE 0x00000001
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT 12
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_MASK \
+ (~((1ull << HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT) - 1))
+
+#define HV_PROCESSOR_POWER_STATE_C0 0
+#define HV_PROCESSOR_POWER_STATE_C1 1
+#define HV_PROCESSOR_POWER_STATE_C2 2
+#define HV_PROCESSOR_POWER_STATE_C3 3
+
+/* hypercall status code */
+#define HV_STATUS_SUCCESS 0
+#define HV_STATUS_INVALID_HYPERCALL_CODE 2
+#define HV_STATUS_INVALID_HYPERCALL_INPUT 3
+#define HV_STATUS_INVALID_ALIGNMENT 4
+
+#endif
--git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h
new file mode 100644
index 0000000..4d8dcbd
--- /dev/null
+++ b/linux-headers/asm-x86/kvm.h
@@ -0,0 +1,324 @@
+#ifndef _ASM_X86_KVM_H
+#define _ASM_X86_KVM_H
+
+/*
+ * KVM x86 specific structures and definitions
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/* Select x86 specific features in <linux/kvm.h> */
+#define __KVM_HAVE_PIT
+#define __KVM_HAVE_IOAPIC
+#define __KVM_HAVE_DEVICE_ASSIGNMENT
+#define __KVM_HAVE_MSI
+#define __KVM_HAVE_USER_NMI
+#define __KVM_HAVE_GUEST_DEBUG
+#define __KVM_HAVE_MSIX
+#define __KVM_HAVE_MCE
+#define __KVM_HAVE_PIT_STATE2
+#define __KVM_HAVE_XEN_HVM
+#define __KVM_HAVE_VCPU_EVENTS
+#define __KVM_HAVE_DEBUGREGS
+#define __KVM_HAVE_XSAVE
+#define __KVM_HAVE_XCRS
+
+/* Architectural interrupt line count. */
+#define KVM_NR_INTERRUPTS 256
+
+struct kvm_memory_alias {
+ __u32 slot; /* this has a different namespace than memory slots */
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size;
+ __u64 target_phys_addr;
+};
+
+/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
+struct kvm_pic_state {
+ __u8 last_irr; /* edge detection */
+ __u8 irr; /* interrupt request register */
+ __u8 imr; /* interrupt mask register */
+ __u8 isr; /* interrupt service register */
+ __u8 priority_add; /* highest irq priority */
+ __u8 irq_base;
+ __u8 read_reg_select;
+ __u8 poll;
+ __u8 special_mask;
+ __u8 init_state;
+ __u8 auto_eoi;
+ __u8 rotate_on_auto_eoi;
+ __u8 special_fully_nested_mode;
+ __u8 init4; /* true if 4 byte init */
+ __u8 elcr; /* PIIX edge/trigger selection */
+ __u8 elcr_mask;
+};
+
+#define KVM_IOAPIC_NUM_PINS 24
+struct kvm_ioapic_state {
+ __u64 base_address;
+ __u32 ioregsel;
+ __u32 id;
+ __u32 irr;
+ __u32 pad;
+ union {
+ __u64 bits;
+ struct {
+ __u8 vector;
+ __u8 delivery_mode:3;
+ __u8 dest_mode:1;
+ __u8 delivery_status:1;
+ __u8 polarity:1;
+ __u8 remote_irr:1;
+ __u8 trig_mode:1;
+ __u8 mask:1;
+ __u8 reserve:7;
+ __u8 reserved[4];
+ __u8 dest_id;
+ } fields;
+ } redirtbl[KVM_IOAPIC_NUM_PINS];
+};
+
+#define KVM_IRQCHIP_PIC_MASTER 0
+#define KVM_IRQCHIP_PIC_SLAVE 1
+#define KVM_IRQCHIP_IOAPIC 2
+#define KVM_NR_IRQCHIPS 3
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 rax, rbx, rcx, rdx;
+ __u64 rsi, rdi, rsp, rbp;
+ __u64 r8, r9, r10, r11;
+ __u64 r12, r13, r14, r15;
+ __u64 rip, rflags;
+};
+
+/* for KVM_GET_LAPIC and KVM_SET_LAPIC */
+#define KVM_APIC_REG_SIZE 0x400
+struct kvm_lapic_state {
+ char regs[KVM_APIC_REG_SIZE];
+};
+
+struct kvm_segment {
+ __u64 base;
+ __u32 limit;
+ __u16 selector;
+ __u8 type;
+ __u8 present, dpl, db, s, l, g, avl;
+ __u8 unusable;
+ __u8 padding;
+};
+
+struct kvm_dtable {
+ __u64 base;
+ __u16 limit;
+ __u16 padding[3];
+};
+
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+ /* out (KVM_GET_SREGS) / in (KVM_SET_SREGS) */
+ struct kvm_segment cs, ds, es, fs, gs, ss;
+ struct kvm_segment tr, ldt;
+ struct kvm_dtable gdt, idt;
+ __u64 cr0, cr2, cr3, cr4, cr8;
+ __u64 efer;
+ __u64 apic_base;
+ __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
+};
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u8 fpr[8][16];
+ __u16 fcw;
+ __u16 fsw;
+ __u8 ftwx; /* in fxsave format */
+ __u8 pad1;
+ __u16 last_opcode;
+ __u64 last_ip;
+ __u64 last_dp;
+ __u8 xmm[16][16];
+ __u32 mxcsr;
+ __u32 pad2;
+};
+
+struct kvm_msr_entry {
+ __u32 index;
+ __u32 reserved;
+ __u64 data;
+};
+
+/* for KVM_GET_MSRS and KVM_SET_MSRS */
+struct kvm_msrs {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 pad;
+
+ struct kvm_msr_entry entries[0];
+};
+
+/* for KVM_GET_MSR_INDEX_LIST */
+struct kvm_msr_list {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 indices[0];
+};
+
+
+struct kvm_cpuid_entry {
+ __u32 function;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding;
+};
+
+/* for KVM_SET_CPUID */
+struct kvm_cpuid {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry entries[0];
+};
+
+struct kvm_cpuid_entry2 {
+ __u32 function;
+ __u32 index;
+ __u32 flags;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding[3];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
+#define KVM_CPUID_FLAG_STATEFUL_FUNC 2
+#define KVM_CPUID_FLAG_STATE_READ_NEXT 4
+
+/* for KVM_SET_CPUID2 */
+struct kvm_cpuid2 {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry2 entries[0];
+};
+
+/* for KVM_GET_PIT and KVM_SET_PIT */
+struct kvm_pit_channel_state {
+ __u32 count; /* can be 65536 */
+ __u16 latched_count;
+ __u8 count_latched;
+ __u8 status_latched;
+ __u8 status;
+ __u8 read_state;
+ __u8 write_state;
+ __u8 write_latch;
+ __u8 rw_mode;
+ __u8 mode;
+ __u8 bcd;
+ __u8 gate;
+ __s64 count_load_time;
+};
+
+struct kvm_debug_exit_arch {
+ __u32 exception;
+ __u32 pad;
+ __u64 pc;
+ __u64 dr6;
+ __u64 dr7;
+};
+
+#define KVM_GUESTDBG_USE_SW_BP 0x00010000
+#define KVM_GUESTDBG_USE_HW_BP 0x00020000
+#define KVM_GUESTDBG_INJECT_DB 0x00040000
+#define KVM_GUESTDBG_INJECT_BP 0x00080000
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+ __u64 debugreg[8];
+};
+
+struct kvm_pit_state {
+ struct kvm_pit_channel_state channels[3];
+};
+
+#define KVM_PIT_FLAGS_HPET_LEGACY 0x00000001
+
+struct kvm_pit_state2 {
+ struct kvm_pit_channel_state channels[3];
+ __u32 flags;
+ __u32 reserved[9];
+};
+
+struct kvm_reinject_control {
+ __u8 pit_reinject;
+ __u8 reserved[31];
+};
+
+/* When set in flags, include corresponding fields on KVM_SET_VCPU_EVENTS */
+#define KVM_VCPUEVENT_VALID_NMI_PENDING 0x00000001
+#define KVM_VCPUEVENT_VALID_SIPI_VECTOR 0x00000002
+#define KVM_VCPUEVENT_VALID_SHADOW 0x00000004
+
+/* Interrupt shadow states */
+#define KVM_X86_SHADOW_INT_MOV_SS 0x01
+#define KVM_X86_SHADOW_INT_STI 0x02
+
+/* for KVM_GET/SET_VCPU_EVENTS */
+struct kvm_vcpu_events {
+ struct {
+ __u8 injected;
+ __u8 nr;
+ __u8 has_error_code;
+ __u8 pad;
+ __u32 error_code;
+ } exception;
+ struct {
+ __u8 injected;
+ __u8 nr;
+ __u8 soft;
+ __u8 shadow;
+ } interrupt;
+ struct {
+ __u8 injected;
+ __u8 pending;
+ __u8 masked;
+ __u8 pad;
+ } nmi;
+ __u32 sipi_vector;
+ __u32 flags;
+ __u32 reserved[10];
+};
+
+/* for KVM_GET/SET_DEBUGREGS */
+struct kvm_debugregs {
+ __u64 db[4];
+ __u64 dr6;
+ __u64 dr7;
+ __u64 flags;
+ __u64 reserved[9];
+};
+
+/* for KVM_CAP_XSAVE */
+struct kvm_xsave {
+ __u32 region[1024];
+};
+
+#define KVM_MAX_XCRS 16
+
+struct kvm_xcr {
+ __u32 xcr;
+ __u32 reserved;
+ __u64 value;
+};
+
+struct kvm_xcrs {
+ __u32 nr_xcrs;
+ __u32 flags;
+ struct kvm_xcr xcrs[KVM_MAX_XCRS];
+ __u64 padding[16];
+};
+
+#endif /* _ASM_X86_KVM_H */
--git a/linux-headers/asm-x86/kvm_para.h b/linux-headers/asm-x86/kvm_para.h
new file mode 100644
index 0000000..834d71e
--- /dev/null
+++ b/linux-headers/asm-x86/kvm_para.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_X86_KVM_PARA_H
+#define _ASM_X86_KVM_PARA_H
+
+#include <linux/types.h>
+#include <asm/hyperv.h>
+
+/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx. It
+ * should be used to determine that a VM is running under KVM.
+ */
+#define KVM_CPUID_SIGNATURE 0x40000000
+
+/* This CPUID returns a feature bitmap in eax. Before enabling a particular
+ * paravirtualization, the appropriate feature bit should be checked.
+ */
+#define KVM_CPUID_FEATURES 0x40000001
+#define KVM_FEATURE_CLOCKSOURCE 0
+#define KVM_FEATURE_NOP_IO_DELAY 1
+#define KVM_FEATURE_MMU_OP 2
+/* This indicates that the new set of kvmclock msrs
+ * are available. The use of 0x11 and 0x12 is deprecated
+ */
+#define KVM_FEATURE_CLOCKSOURCE2 3
+#define KVM_FEATURE_ASYNC_PF 4
+
+/* The last 8 bits are used to indicate how to interpret the flags field
+ * in pvclock structure. If no bits are set, all flags are ignored.
+ */
+#define KVM_FEATURE_CLOCKSOURCE_STABLE_BIT 24
+
+#define MSR_KVM_WALL_CLOCK 0x11
+#define MSR_KVM_SYSTEM_TIME 0x12
+
+/* Custom MSRs falls in the range 0x4b564d00-0x4b564dff */
+#define MSR_KVM_WALL_CLOCK_NEW 0x4b564d00
+#define MSR_KVM_SYSTEM_TIME_NEW 0x4b564d01
+#define MSR_KVM_ASYNC_PF_EN 0x4b564d02
+
+#define KVM_MAX_MMU_OP_BATCH 32
+
+#define KVM_ASYNC_PF_ENABLED (1 << 0)
+#define KVM_ASYNC_PF_SEND_ALWAYS (1 << 1)
+
+/* Operations for KVM_HC_MMU_OP */
+#define KVM_MMU_OP_WRITE_PTE 1
+#define KVM_MMU_OP_FLUSH_TLB 2
+#define KVM_MMU_OP_RELEASE_PT 3
+
+/* Payload for KVM_HC_MMU_OP */
+struct kvm_mmu_op_header {
+ __u32 op;
+ __u32 pad;
+};
+
+struct kvm_mmu_op_write_pte {
+ struct kvm_mmu_op_header header;
+ __u64 pte_phys;
+ __u64 pte_val;
+};
+
+struct kvm_mmu_op_flush_tlb {
+ struct kvm_mmu_op_header header;
+};
+
+struct kvm_mmu_op_release_pt {
+ struct kvm_mmu_op_header header;
+ __u64 pt_phys;
+};
+
+#define KVM_PV_REASON_PAGE_NOT_PRESENT 1
+#define KVM_PV_REASON_PAGE_READY 2
+
+struct kvm_vcpu_pv_apf_data {
+ __u32 reason;
+ __u8 pad[60];
+ __u32 enabled;
+};
+
+
+#endif /* _ASM_X86_KVM_PARA_H */
--git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
new file mode 100644
index 0000000..fc63b73
--- /dev/null
+++ b/linux-headers/linux/kvm.h
@@ -0,0 +1,804 @@
+#ifndef __LINUX_KVM_H
+#define __LINUX_KVM_H
+
+/*
+ * Userspace interface for /dev/kvm - kernel based virtual machine
+ *
+ * Note: you must update KVM_API_VERSION if you change this interface.
+ */
+
+#include <linux/types.h>
+
+#include <linux/ioctl.h>
+#include <asm/kvm.h>
+
+#define KVM_API_VERSION 12
+
+/* *** Deprecated interfaces *** */
+
+#define KVM_TRC_SHIFT 16
+
+#define KVM_TRC_ENTRYEXIT (1 << KVM_TRC_SHIFT)
+#define KVM_TRC_HANDLER (1 << (KVM_TRC_SHIFT + 1))
+
+#define KVM_TRC_VMENTRY (KVM_TRC_ENTRYEXIT + 0x01)
+#define KVM_TRC_VMEXIT (KVM_TRC_ENTRYEXIT + 0x02)
+#define KVM_TRC_PAGE_FAULT (KVM_TRC_HANDLER + 0x01)
+
+#define KVM_TRC_HEAD_SIZE 12
+#define KVM_TRC_CYCLE_SIZE 8
+#define KVM_TRC_EXTRA_MAX 7
+
+#define KVM_TRC_INJ_VIRQ (KVM_TRC_HANDLER + 0x02)
+#define KVM_TRC_REDELIVER_EVT (KVM_TRC_HANDLER + 0x03)
+#define KVM_TRC_PEND_INTR (KVM_TRC_HANDLER + 0x04)
+#define KVM_TRC_IO_READ (KVM_TRC_HANDLER + 0x05)
+#define KVM_TRC_IO_WRITE (KVM_TRC_HANDLER + 0x06)
+#define KVM_TRC_CR_READ (KVM_TRC_HANDLER + 0x07)
+#define KVM_TRC_CR_WRITE (KVM_TRC_HANDLER + 0x08)
+#define KVM_TRC_DR_READ (KVM_TRC_HANDLER + 0x09)
+#define KVM_TRC_DR_WRITE (KVM_TRC_HANDLER + 0x0A)
+#define KVM_TRC_MSR_READ (KVM_TRC_HANDLER + 0x0B)
+#define KVM_TRC_MSR_WRITE (KVM_TRC_HANDLER + 0x0C)
+#define KVM_TRC_CPUID (KVM_TRC_HANDLER + 0x0D)
+#define KVM_TRC_INTR (KVM_TRC_HANDLER + 0x0E)
+#define KVM_TRC_NMI (KVM_TRC_HANDLER + 0x0F)
+#define KVM_TRC_VMMCALL (KVM_TRC_HANDLER + 0x10)
+#define KVM_TRC_HLT (KVM_TRC_HANDLER + 0x11)
+#define KVM_TRC_CLTS (KVM_TRC_HANDLER + 0x12)
+#define KVM_TRC_LMSW (KVM_TRC_HANDLER + 0x13)
+#define KVM_TRC_APIC_ACCESS (KVM_TRC_HANDLER + 0x14)
+#define KVM_TRC_TDP_FAULT (KVM_TRC_HANDLER + 0x15)
+#define KVM_TRC_GTLB_WRITE (KVM_TRC_HANDLER + 0x16)
+#define KVM_TRC_STLB_WRITE (KVM_TRC_HANDLER + 0x17)
+#define KVM_TRC_STLB_INVAL (KVM_TRC_HANDLER + 0x18)
+#define KVM_TRC_PPC_INSTR (KVM_TRC_HANDLER + 0x19)
+
+struct kvm_user_trace_setup {
+ __u32 buf_size;
+ __u32 buf_nr;
+};
+
+#define __KVM_DEPRECATED_MAIN_W_0x06 \
+ _IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
+#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
+#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
+
+#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
+
+struct kvm_breakpoint {
+ __u32 enabled;
+ __u32 padding;
+ __u64 address;
+};
+
+struct kvm_debug_guest {
+ __u32 enabled;
+ __u32 pad;
+ struct kvm_breakpoint breakpoints[4];
+ __u32 singlestep;
+};
+
+#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
+
+/* *** End of deprecated interfaces *** */
+
+
+/* for KVM_CREATE_MEMORY_REGION */
+struct kvm_memory_region {
+ __u32 slot;
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+};
+
+/* for KVM_SET_USER_MEMORY_REGION */
+struct kvm_userspace_memory_region {
+ __u32 slot;
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+ __u64 userspace_addr; /* start of the userspace allocated memory */
+};
+
+/* for kvm_memory_region::flags */
+#define KVM_MEM_LOG_DIRTY_PAGES 1UL
+#define KVM_MEMSLOT_INVALID (1UL << 1)
+
+/* for KVM_IRQ_LINE */
+struct kvm_irq_level {
+ /*
+ * ACPI gsi notion of irq.
+ * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
+ * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
+ */
+ union {
+ __u32 irq;
+ __s32 status;
+ };
+ __u32 level;
+};
+
+
+struct kvm_irqchip {
+ __u32 chip_id;
+ __u32 pad;
+ union {
+ char dummy[512]; /* reserving space */
+#ifdef __KVM_HAVE_PIT
+ struct kvm_pic_state pic;
+#endif
+#ifdef __KVM_HAVE_IOAPIC
+ struct kvm_ioapic_state ioapic;
+#endif
+ } chip;
+};
+
+/* for KVM_CREATE_PIT2 */
+struct kvm_pit_config {
+ __u32 flags;
+ __u32 pad[15];
+};
+
+#define KVM_PIT_SPEAKER_DUMMY 1
+
+#define KVM_EXIT_UNKNOWN 0
+#define KVM_EXIT_EXCEPTION 1
+#define KVM_EXIT_IO 2
+#define KVM_EXIT_HYPERCALL 3
+#define KVM_EXIT_DEBUG 4
+#define KVM_EXIT_HLT 5
+#define KVM_EXIT_MMIO 6
+#define KVM_EXIT_IRQ_WINDOW_OPEN 7
+#define KVM_EXIT_SHUTDOWN 8
+#define KVM_EXIT_FAIL_ENTRY 9
+#define KVM_EXIT_INTR 10
+#define KVM_EXIT_SET_TPR 11
+#define KVM_EXIT_TPR_ACCESS 12
+#define KVM_EXIT_S390_SIEIC 13
+#define KVM_EXIT_S390_RESET 14
+#define KVM_EXIT_DCR 15
+#define KVM_EXIT_NMI 16
+#define KVM_EXIT_INTERNAL_ERROR 17
+#define KVM_EXIT_OSI 18
+
+/* For KVM_EXIT_INTERNAL_ERROR */
+#define KVM_INTERNAL_ERROR_EMULATION 1
+#define KVM_INTERNAL_ERROR_SIMUL_EX 2
+
+/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
+struct kvm_run {
+ /* in */
+ __u8 request_interrupt_window;
+ __u8 padding1[7];
+
+ /* out */
+ __u32 exit_reason;
+ __u8 ready_for_interrupt_injection;
+ __u8 if_flag;
+ __u8 padding2[2];
+
+ /* in (pre_kvm_run), out (post_kvm_run) */
+ __u64 cr8;
+ __u64 apic_base;
+
+#ifdef __KVM_S390
+ /* the processor status word for s390 */
+ __u64 psw_mask; /* psw upper half */
+ __u64 psw_addr; /* psw lower half */
+#endif
+ union {
+ /* KVM_EXIT_UNKNOWN */
+ struct {
+ __u64 hardware_exit_reason;
+ } hw;
+ /* KVM_EXIT_FAIL_ENTRY */
+ struct {
+ __u64 hardware_entry_failure_reason;
+ } fail_entry;
+ /* KVM_EXIT_EXCEPTION */
+ struct {
+ __u32 exception;
+ __u32 error_code;
+ } ex;
+ /* KVM_EXIT_IO */
+ struct {
+#define KVM_EXIT_IO_IN 0
+#define KVM_EXIT_IO_OUT 1
+ __u8 direction;
+ __u8 size; /* bytes */
+ __u16 port;
+ __u32 count;
+ __u64 data_offset; /* relative to kvm_run start */
+ } io;
+ struct {
+ struct kvm_debug_exit_arch arch;
+ } debug;
+ /* KVM_EXIT_MMIO */
+ struct {
+ __u64 phys_addr;
+ __u8 data[8];
+ __u32 len;
+ __u8 is_write;
+ } mmio;
+ /* KVM_EXIT_HYPERCALL */
+ struct {
+ __u64 nr;
+ __u64 args[6];
+ __u64 ret;
+ __u32 longmode;
+ __u32 pad;
+ } hypercall;
+ /* KVM_EXIT_TPR_ACCESS */
+ struct {
+ __u64 rip;
+ __u32 is_write;
+ __u32 pad;
+ } tpr_access;
+ /* KVM_EXIT_S390_SIEIC */
+ struct {
+ __u8 icptcode;
+ __u16 ipa;
+ __u32 ipb;
+ } s390_sieic;
+ /* KVM_EXIT_S390_RESET */
+#define KVM_S390_RESET_POR 1
+#define KVM_S390_RESET_CLEAR 2
+#define KVM_S390_RESET_SUBSYSTEM 4
+#define KVM_S390_RESET_CPU_INIT 8
+#define KVM_S390_RESET_IPL 16
+ __u64 s390_reset_flags;
+ /* KVM_EXIT_DCR */
+ struct {
+ __u32 dcrn;
+ __u32 data;
+ __u8 is_write;
+ } dcr;
+ struct {
+ __u32 suberror;
+ /* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
+ __u32 ndata;
+ __u64 data[16];
+ } internal;
+ /* KVM_EXIT_OSI */
+ struct {
+ __u64 gprs[32];
+ } osi;
+ /* Fix the size of the union. */
+ char padding[256];
+ };
+};
+
+/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
+
+struct kvm_coalesced_mmio_zone {
+ __u64 addr;
+ __u32 size;
+ __u32 pad;
+};
+
+struct kvm_coalesced_mmio {
+ __u64 phys_addr;
+ __u32 len;
+ __u32 pad;
+ __u8 data[8];
+};
+
+struct kvm_coalesced_mmio_ring {
+ __u32 first, last;
+ struct kvm_coalesced_mmio coalesced_mmio[0];
+};
+
+#define KVM_COALESCED_MMIO_MAX \
+ ((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \
+ sizeof(struct kvm_coalesced_mmio))
+
+/* for KVM_TRANSLATE */
+struct kvm_translation {
+ /* in */
+ __u64 linear_address;
+
+ /* out */
+ __u64 physical_address;
+ __u8 valid;
+ __u8 writeable;
+ __u8 usermode;
+ __u8 pad[5];
+};
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+ /* in */
+ __u32 irq;
+};
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+ __u32 slot;
+ __u32 padding1;
+ union {
+ void *dirty_bitmap; /* one bit per page */
+ __u64 padding2;
+ };
+};
+
+/* for KVM_SET_SIGNAL_MASK */
+struct kvm_signal_mask {
+ __u32 len;
+ __u8 sigset[0];
+};
+
+/* for KVM_TPR_ACCESS_REPORTING */
+struct kvm_tpr_access_ctl {
+ __u32 enabled;
+ __u32 flags;
+ __u32 reserved[8];
+};
+
+/* for KVM_SET_VAPIC_ADDR */
+struct kvm_vapic_addr {
+ __u64 vapic_addr;
+};
+
+/* for KVM_SET_MPSTATE */
+
+#define KVM_MP_STATE_RUNNABLE 0
+#define KVM_MP_STATE_UNINITIALIZED 1
+#define KVM_MP_STATE_INIT_RECEIVED 2
+#define KVM_MP_STATE_HALTED 3
+#define KVM_MP_STATE_SIPI_RECEIVED 4
+
+struct kvm_mp_state {
+ __u32 mp_state;
+};
+
+struct kvm_s390_psw {
+ __u64 mask;
+ __u64 addr;
+};
+
+/* valid values for type in kvm_s390_interrupt */
+#define KVM_S390_SIGP_STOP 0xfffe0000u
+#define KVM_S390_PROGRAM_INT 0xfffe0001u
+#define KVM_S390_SIGP_SET_PREFIX 0xfffe0002u
+#define KVM_S390_RESTART 0xfffe0003u
+#define KVM_S390_INT_VIRTIO 0xffff2603u
+#define KVM_S390_INT_SERVICE 0xffff2401u
+#define KVM_S390_INT_EMERGENCY 0xffff1201u
+
+struct kvm_s390_interrupt {
+ __u32 type;
+ __u32 parm;
+ __u64 parm64;
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+
+#define KVM_GUESTDBG_ENABLE 0x00000001
+#define KVM_GUESTDBG_SINGLESTEP 0x00000002
+
+struct kvm_guest_debug {
+ __u32 control;
+ __u32 pad;
+ struct kvm_guest_debug_arch arch;
+};
+
+enum {
+ kvm_ioeventfd_flag_nr_datamatch,
+ kvm_ioeventfd_flag_nr_pio,
+ kvm_ioeventfd_flag_nr_deassign,
+ kvm_ioeventfd_flag_nr_max,
+};
+
+#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
+#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio)
+#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign)
+
+#define KVM_IOEVENTFD_VALID_FLAG_MASK ((1 << kvm_ioeventfd_flag_nr_max) - 1)
+
+struct kvm_ioeventfd {
+ __u64 datamatch;
+ __u64 addr; /* legal pio/mmio address */
+ __u32 len; /* 1, 2, 4, or 8 bytes */
+ __s32 fd;
+ __u32 flags;
+ __u8 pad[36];
+};
+
+/* for KVM_ENABLE_CAP */
+struct kvm_enable_cap {
+ /* in */
+ __u32 cap;
+ __u32 flags;
+ __u64 args[4];
+ __u8 pad[64];
+};
+
+/* for KVM_PPC_GET_PVINFO */
+struct kvm_ppc_pvinfo {
+ /* out */
+ __u32 flags;
+ __u32 hcall[4];
+ __u8 pad[108];
+};
+
+#define KVMIO 0xAE
+
+/*
+ * ioctls for /dev/kvm fds:
+ */
+#define KVM_GET_API_VERSION _IO(KVMIO, 0x00)
+#define KVM_CREATE_VM _IO(KVMIO, 0x01) /* returns a VM fd */
+#define KVM_GET_MSR_INDEX_LIST _IOWR(KVMIO, 0x02, struct kvm_msr_list)
+
+#define KVM_S390_ENABLE_SIE _IO(KVMIO, 0x06)
+/*
+ * Check if a kvm extension is available. Argument is extension number,
+ * return is 1 (yes) or 0 (no, sorry).
+ */
+#define KVM_CHECK_EXTENSION _IO(KVMIO, 0x03)
+/*
+ * Get size for mmap(vcpu_fd)
+ */
+#define KVM_GET_VCPU_MMAP_SIZE _IO(KVMIO, 0x04) /* in bytes */
+#define KVM_GET_SUPPORTED_CPUID _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
+#define KVM_TRACE_ENABLE __KVM_DEPRECATED_MAIN_W_0x06
+#define KVM_TRACE_PAUSE __KVM_DEPRECATED_MAIN_0x07
+#define KVM_TRACE_DISABLE __KVM_DEPRECATED_MAIN_0x08
+
+/*
+ * Extension capability list.
+ */
+#define KVM_CAP_IRQCHIP 0
+#define KVM_CAP_HLT 1
+#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2
+#define KVM_CAP_USER_MEMORY 3
+#define KVM_CAP_SET_TSS_ADDR 4
+#define KVM_CAP_VAPIC 6
+#define KVM_CAP_EXT_CPUID 7
+#define KVM_CAP_CLOCKSOURCE 8
+#define KVM_CAP_NR_VCPUS 9 /* returns max vcpus per vm */
+#define KVM_CAP_NR_MEMSLOTS 10 /* returns max memory slots per vm */
+#define KVM_CAP_PIT 11
+#define KVM_CAP_NOP_IO_DELAY 12
+#define KVM_CAP_PV_MMU 13
+#define KVM_CAP_MP_STATE 14
+#define KVM_CAP_COALESCED_MMIO 15
+#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
+#define KVM_CAP_DEVICE_ASSIGNMENT 17
+#endif
+#define KVM_CAP_IOMMU 18
+#ifdef __KVM_HAVE_MSI
+#define KVM_CAP_DEVICE_MSI 20
+#endif
+/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
+#ifdef __KVM_HAVE_USER_NMI
+#define KVM_CAP_USER_NMI 22
+#endif
+#ifdef __KVM_HAVE_GUEST_DEBUG
+#define KVM_CAP_SET_GUEST_DEBUG 23
+#endif
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_REINJECT_CONTROL 24
+#endif
+#ifdef __KVM_HAVE_IOAPIC
+#define KVM_CAP_IRQ_ROUTING 25
+#endif
+#define KVM_CAP_IRQ_INJECT_STATUS 26
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
+#define KVM_CAP_DEVICE_DEASSIGNMENT 27
+#endif
+#ifdef __KVM_HAVE_MSIX
+#define KVM_CAP_DEVICE_MSIX 28
+#endif
+#define KVM_CAP_ASSIGN_DEV_IRQ 29
+/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
+#ifdef __KVM_HAVE_MCE
+#define KVM_CAP_MCE 31
+#endif
+#define KVM_CAP_IRQFD 32
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_PIT2 33
+#endif
+#define KVM_CAP_SET_BOOT_CPU_ID 34
+#ifdef __KVM_HAVE_PIT_STATE2
+#define KVM_CAP_PIT_STATE2 35
+#endif
+#define KVM_CAP_IOEVENTFD 36
+#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
+#ifdef __KVM_HAVE_XEN_HVM
+#define KVM_CAP_XEN_HVM 38
+#endif
+#define KVM_CAP_ADJUST_CLOCK 39
+#define KVM_CAP_INTERNAL_ERROR_DATA 40
+#ifdef __KVM_HAVE_VCPU_EVENTS
+#define KVM_CAP_VCPU_EVENTS 41
+#endif
+#define KVM_CAP_S390_PSW 42
+#define KVM_CAP_PPC_SEGSTATE 43
+#define KVM_CAP_HYPERV 44
+#define KVM_CAP_HYPERV_VAPIC 45
+#define KVM_CAP_HYPERV_SPIN 46
+#define KVM_CAP_PCI_SEGMENT 47
+#define KVM_CAP_PPC_PAIRED_SINGLES 48
+#define KVM_CAP_INTR_SHADOW 49
+#ifdef __KVM_HAVE_DEBUGREGS
+#define KVM_CAP_DEBUGREGS 50
+#endif
+#define KVM_CAP_X86_ROBUST_SINGLESTEP 51
+#define KVM_CAP_PPC_OSI 52
+#define KVM_CAP_PPC_UNSET_IRQ 53
+#define KVM_CAP_ENABLE_CAP 54
+#ifdef __KVM_HAVE_XSAVE
+#define KVM_CAP_XSAVE 55
+#endif
+#ifdef __KVM_HAVE_XCRS
+#define KVM_CAP_XCRS 56
+#endif
+#define KVM_CAP_PPC_GET_PVINFO 57
+#define KVM_CAP_PPC_IRQ_LEVEL 58
+#define KVM_CAP_ASYNC_PF 59
+#define KVM_CAP_TSC_CONTROL 60
+#define KVM_CAP_GET_TSC_KHZ 61
+#define KVM_CAP_PPC_BOOKE_SREGS 62
+
+#ifdef KVM_CAP_IRQ_ROUTING
+
+struct kvm_irq_routing_irqchip {
+ __u32 irqchip;
+ __u32 pin;
+};
+
+struct kvm_irq_routing_msi {
+ __u32 address_lo;
+ __u32 address_hi;
+ __u32 data;
+ __u32 pad;
+};
+
+/* gsi routing entry types */
+#define KVM_IRQ_ROUTING_IRQCHIP 1
+#define KVM_IRQ_ROUTING_MSI 2
+
+struct kvm_irq_routing_entry {
+ __u32 gsi;
+ __u32 type;
+ __u32 flags;
+ __u32 pad;
+ union {
+ struct kvm_irq_routing_irqchip irqchip;
+ struct kvm_irq_routing_msi msi;
+ __u32 pad[8];
+ } u;
+};
+
+struct kvm_irq_routing {
+ __u32 nr;
+ __u32 flags;
+ struct kvm_irq_routing_entry entries[0];
+};
+
+#endif
+
+#ifdef KVM_CAP_MCE
+/* x86 MCE */
+struct kvm_x86_mce {
+ __u64 status;
+ __u64 addr;
+ __u64 misc;
+ __u64 mcg_status;
+ __u8 bank;
+ __u8 pad1[7];
+ __u64 pad2[3];
+};
+#endif
+
+#ifdef KVM_CAP_XEN_HVM
+struct kvm_xen_hvm_config {
+ __u32 flags;
+ __u32 msr;
+ __u64 blob_addr_32;
+ __u64 blob_addr_64;
+ __u8 blob_size_32;
+ __u8 blob_size_64;
+ __u8 pad2[30];
+};
+#endif
+
+#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
+
+struct kvm_irqfd {
+ __u32 fd;
+ __u32 gsi;
+ __u32 flags;
+ __u8 pad[20];
+};
+
+struct kvm_clock_data {
+ __u64 clock;
+ __u32 flags;
+ __u32 pad[9];
+};
+
+/*
+ * ioctls for VM fds
+ */
+#define KVM_SET_MEMORY_REGION _IOW(KVMIO, 0x40, struct kvm_memory_region)
+/*
+ * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
+ * a vcpu fd.
+ */
+#define KVM_CREATE_VCPU _IO(KVMIO, 0x41)
+#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log)
+/* KVM_SET_MEMORY_ALIAS is obsolete: */
+#define KVM_SET_MEMORY_ALIAS _IOW(KVMIO, 0x43, struct kvm_memory_alias)
+#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44)
+#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45)
+#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
+ struct kvm_userspace_memory_region)
+#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47)
+#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64)
+/* Device model IOC */
+#define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60)
+#define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level)
+#define KVM_GET_IRQCHIP _IOWR(KVMIO, 0x62, struct kvm_irqchip)
+#define KVM_SET_IRQCHIP _IOR(KVMIO, 0x63, struct kvm_irqchip)
+#define KVM_CREATE_PIT _IO(KVMIO, 0x64)
+#define KVM_GET_PIT _IOWR(KVMIO, 0x65, struct kvm_pit_state)
+#define KVM_SET_PIT _IOR(KVMIO, 0x66, struct kvm_pit_state)
+#define KVM_IRQ_LINE_STATUS _IOWR(KVMIO, 0x67, struct kvm_irq_level)
+#define KVM_REGISTER_COALESCED_MMIO \
+ _IOW(KVMIO, 0x67, struct kvm_coalesced_mmio_zone)
+#define KVM_UNREGISTER_COALESCED_MMIO \
+ _IOW(KVMIO, 0x68, struct kvm_coalesced_mmio_zone)
+#define KVM_ASSIGN_PCI_DEVICE _IOR(KVMIO, 0x69, \
+ struct kvm_assigned_pci_dev)
+#define KVM_SET_GSI_ROUTING _IOW(KVMIO, 0x6a, struct kvm_irq_routing)
+/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
+#define KVM_ASSIGN_IRQ __KVM_DEPRECATED_VM_R_0x70
+#define KVM_ASSIGN_DEV_IRQ _IOW(KVMIO, 0x70, struct kvm_assigned_irq)
+#define KVM_REINJECT_CONTROL _IO(KVMIO, 0x71)
+#define KVM_DEASSIGN_PCI_DEVICE _IOW(KVMIO, 0x72, \
+ struct kvm_assigned_pci_dev)
+#define KVM_ASSIGN_SET_MSIX_NR _IOW(KVMIO, 0x73, \
+ struct kvm_assigned_msix_nr)
+#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO, 0x74, \
+ struct kvm_assigned_msix_entry)
+#define KVM_DEASSIGN_DEV_IRQ _IOW(KVMIO, 0x75, struct kvm_assigned_irq)
+#define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd)
+#define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config)
+#define KVM_SET_BOOT_CPU_ID _IO(KVMIO, 0x78)
+#define KVM_IOEVENTFD _IOW(KVMIO, 0x79, struct kvm_ioeventfd)
+#define KVM_XEN_HVM_CONFIG _IOW(KVMIO, 0x7a, struct kvm_xen_hvm_config)
+#define KVM_SET_CLOCK _IOW(KVMIO, 0x7b, struct kvm_clock_data)
+#define KVM_GET_CLOCK _IOR(KVMIO, 0x7c, struct kvm_clock_data)
+/* Available with KVM_CAP_PIT_STATE2 */
+#define KVM_GET_PIT2 _IOR(KVMIO, 0x9f, struct kvm_pit_state2)
+#define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2)
+/* Available with KVM_CAP_PPC_GET_PVINFO */
+#define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo)
+/* Available with KVM_CAP_TSC_CONTROL */
+#define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2)
+#define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3)
+
+/*
+ * ioctls for vcpu fds
+ */
+#define KVM_RUN _IO(KVMIO, 0x80)
+#define KVM_GET_REGS _IOR(KVMIO, 0x81, struct kvm_regs)
+#define KVM_SET_REGS _IOW(KVMIO, 0x82, struct kvm_regs)
+#define KVM_GET_SREGS _IOR(KVMIO, 0x83, struct kvm_sregs)
+#define KVM_SET_SREGS _IOW(KVMIO, 0x84, struct kvm_sregs)
+#define KVM_TRANSLATE _IOWR(KVMIO, 0x85, struct kvm_translation)
+#define KVM_INTERRUPT _IOW(KVMIO, 0x86, struct kvm_interrupt)
+/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
+#define KVM_DEBUG_GUEST __KVM_DEPRECATED_VCPU_W_0x87
+#define KVM_GET_MSRS _IOWR(KVMIO, 0x88, struct kvm_msrs)
+#define KVM_SET_MSRS _IOW(KVMIO, 0x89, struct kvm_msrs)
+#define KVM_SET_CPUID _IOW(KVMIO, 0x8a, struct kvm_cpuid)
+#define KVM_SET_SIGNAL_MASK _IOW(KVMIO, 0x8b, struct kvm_signal_mask)
+#define KVM_GET_FPU _IOR(KVMIO, 0x8c, struct kvm_fpu)
+#define KVM_SET_FPU _IOW(KVMIO, 0x8d, struct kvm_fpu)
+#define KVM_GET_LAPIC _IOR(KVMIO, 0x8e, struct kvm_lapic_state)
+#define KVM_SET_LAPIC _IOW(KVMIO, 0x8f, struct kvm_lapic_state)
+#define KVM_SET_CPUID2 _IOW(KVMIO, 0x90, struct kvm_cpuid2)
+#define KVM_GET_CPUID2 _IOWR(KVMIO, 0x91, struct kvm_cpuid2)
+/* Available with KVM_CAP_VAPIC */
+#define KVM_TPR_ACCESS_REPORTING _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl)
+/* Available with KVM_CAP_VAPIC */
+#define KVM_SET_VAPIC_ADDR _IOW(KVMIO, 0x93, struct kvm_vapic_addr)
+/* valid for virtual machine (for floating interrupt)_and_ vcpu */
+#define KVM_S390_INTERRUPT _IOW(KVMIO, 0x94, struct kvm_s390_interrupt)
+/* store status for s390 */
+#define KVM_S390_STORE_STATUS_NOADDR (-1ul)
+#define KVM_S390_STORE_STATUS_PREFIXED (-2ul)
+#define KVM_S390_STORE_STATUS _IOW(KVMIO, 0x95, unsigned long)
+/* initial ipl psw for s390 */
+#define KVM_S390_SET_INITIAL_PSW _IOW(KVMIO, 0x96, struct kvm_s390_psw)
+/* initial reset for s390 */
+#define KVM_S390_INITIAL_RESET _IO(KVMIO, 0x97)
+#define KVM_GET_MP_STATE _IOR(KVMIO, 0x98, struct kvm_mp_state)
+#define KVM_SET_MP_STATE _IOW(KVMIO, 0x99, struct kvm_mp_state)
+/* Available with KVM_CAP_NMI */
+#define KVM_NMI _IO(KVMIO, 0x9a)
+/* Available with KVM_CAP_SET_GUEST_DEBUG */
+#define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug)
+/* MCE for x86 */
+#define KVM_X86_SETUP_MCE _IOW(KVMIO, 0x9c, __u64)
+#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO, 0x9d, __u64)
+#define KVM_X86_SET_MCE _IOW(KVMIO, 0x9e, struct kvm_x86_mce)
+/* IA64 stack access */
+#define KVM_IA64_VCPU_GET_STACK _IOR(KVMIO, 0x9a, void *)
+#define KVM_IA64_VCPU_SET_STACK _IOW(KVMIO, 0x9b, void *)
+/* Available with KVM_CAP_VCPU_EVENTS */
+#define KVM_GET_VCPU_EVENTS _IOR(KVMIO, 0x9f, struct kvm_vcpu_events)
+#define KVM_SET_VCPU_EVENTS _IOW(KVMIO, 0xa0, struct kvm_vcpu_events)
+/* Available with KVM_CAP_DEBUGREGS */
+#define KVM_GET_DEBUGREGS _IOR(KVMIO, 0xa1, struct kvm_debugregs)
+#define KVM_SET_DEBUGREGS _IOW(KVMIO, 0xa2, struct kvm_debugregs)
+#define KVM_ENABLE_CAP _IOW(KVMIO, 0xa3, struct kvm_enable_cap)
+/* Available with KVM_CAP_XSAVE */
+#define KVM_GET_XSAVE _IOR(KVMIO, 0xa4, struct kvm_xsave)
+#define KVM_SET_XSAVE _IOW(KVMIO, 0xa5, struct kvm_xsave)
+/* Available with KVM_CAP_XCRS */
+#define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs)
+#define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs)
+
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
+
+struct kvm_assigned_pci_dev {
+ __u32 assigned_dev_id;
+ __u32 busnr;
+ __u32 devfn;
+ __u32 flags;
+ __u32 segnr;
+ union {
+ __u32 reserved[11];
+ };
+};
+
+#define KVM_DEV_IRQ_HOST_INTX (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10)
+
+#define KVM_DEV_IRQ_HOST_MASK 0x00ff
+#define KVM_DEV_IRQ_GUEST_MASK 0xff00
+
+struct kvm_assigned_irq {
+ __u32 assigned_dev_id;
+ __u32 host_irq;
+ __u32 guest_irq;
+ __u32 flags;
+ union {
+ struct {
+ __u32 addr_lo;
+ __u32 addr_hi;
+ __u32 data;
+ } guest_msi;
+ __u32 reserved[12];
+ };
+};
+
+
+struct kvm_assigned_msix_nr {
+ __u32 assigned_dev_id;
+ __u16 entry_nr;
+ __u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV 256
+struct kvm_assigned_msix_entry {
+ __u32 assigned_dev_id;
+ __u32 gsi;
+ __u16 entry; /* The index of entry in the MSI-X table */
+ __u16 padding[3];
+};
+
+#endif /* __LINUX_KVM_H */
--git a/linux-headers/linux/kvm_para.h b/linux-headers/linux/kvm_para.h
new file mode 100644
index 0000000..b315e27
--- /dev/null
+++ b/linux-headers/linux/kvm_para.h
@@ -0,0 +1,29 @@
+#ifndef __LINUX_KVM_PARA_H
+#define __LINUX_KVM_PARA_H
+
+/*
+ * This header file provides a method for making a hypercall to the host
+ * Architectures should define:
+ * - kvm_hypercall0, kvm_hypercall1...
+ * - kvm_arch_para_features
+ * - kvm_para_available
+ */
+
+/* Return values for hypercalls */
+#define KVM_ENOSYS 1000
+#define KVM_EFAULT EFAULT
+#define KVM_E2BIG E2BIG
+#define KVM_EPERM EPERM
+
+#define KVM_HC_VAPIC_POLL_IRQ 1
+#define KVM_HC_MMU_OP 2
+#define KVM_HC_FEATURES 3
+#define KVM_HC_PPC_MAP_MAGIC_PAGE 4
+
+/*
+ * hypercalls use architecture specific
+ */
+#include <asm/kvm_para.h>
+
+#endif /* __LINUX_KVM_PARA_H */
+
--git a/linux-headers/linux/vhost.h b/linux-headers/linux/vhost.h
new file mode 100644
index 0000000..165a484
--- /dev/null
+++ b/linux-headers/linux/vhost.h
@@ -0,0 +1,130 @@
+#ifndef _LINUX_VHOST_H
+#define _LINUX_VHOST_H
+/* Userspace interface for in-kernel virtio accelerators. */
+
+/* vhost is used to reduce the number of system calls involved in virtio.
+ *
+ * Existing virtio net code is used in the guest without modification.
+ *
+ * This header includes interface used by userspace hypervisor for
+ * device configuration.
+ */
+
+#include <linux/types.h>
+
+#include <linux/ioctl.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+
+struct vhost_vring_state {
+ unsigned int index;
+ unsigned int num;
+};
+
+struct vhost_vring_file {
+ unsigned int index;
+ int fd; /* Pass -1 to unbind from file. */
+
+};
+
+struct vhost_vring_addr {
+ unsigned int index;
+ /* Option flags. */
+ unsigned int flags;
+ /* Flag values: */
+ /* Whether log address is valid. If set enables logging. */
+#define VHOST_VRING_F_LOG 0
+
+ /* Start of array of descriptors (virtually contiguous) */
+ __u64 desc_user_addr;
+ /* Used structure address. Must be 32 bit aligned */
+ __u64 used_user_addr;
+ /* Available structure address. Must be 16 bit aligned */
+ __u64 avail_user_addr;
+ /* Logging support. */
+ /* Log writes to used structure, at offset calculated from specified
+ * address. Address must be 32 bit aligned. */
+ __u64 log_guest_addr;
+};
+
+struct vhost_memory_region {
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+ __u64 userspace_addr;
+ __u64 flags_padding; /* No flags are currently specified. */
+};
+
+/* All region addresses and sizes must be 4K aligned. */
+#define VHOST_PAGE_SIZE 0x1000
+
+struct vhost_memory {
+ __u32 nregions;
+ __u32 padding;
+ struct vhost_memory_region regions[0];
+};
+
+/* ioctls */
+
+#define VHOST_VIRTIO 0xAF
+
+/* Features bitmask for forward compatibility. Transport bits are used for
+ * vhost specific features. */
+#define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64)
+#define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64)
+
+/* Set current process as the (exclusive) owner of this file descriptor. This
+ * must be called before any other vhost command. Further calls to
+ * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
+#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
+/* Give up ownership, and reset the device to default values.
+ * Allows subsequent call to VHOST_OWNER_SET to succeed. */
+#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
+
+/* Set up/modify memory layout */
+#define VHOST_SET_MEM_TABLE _IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
+
+/* Write logging setup. */
+/* Memory writes can optionally be logged by setting bit at an offset
+ * (calculated from the physical address) from specified log base.
+ * The bit is set using an atomic 32 bit operation. */
+/* Set base address for logging. */
+#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
+/* Specify an eventfd file descriptor to signal on log write. */
+#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
+
+/* Ring setup. */
+/* Set number of descriptors in ring. This parameter can not
+ * be modified while ring is running (bound to a device). */
+#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
+/* Set addresses for the ring. */
+#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
+/* Base value where queue looks for available descriptors */
+#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+/* Get accessor: reads index, writes value in num */
+#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+
+/* The following ioctls use eventfd file descriptors to signal and poll
+ * for events. */
+
+/* Set eventfd to poll for added buffers */
+#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
+/* Set eventfd to signal when buffers have beed used */
+#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
+/* Set eventfd to signal an error */
+#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
+
+/* VHOST_NET specific defines */
+
+/* Attach virtio net ring to a raw socket, or tap device.
+ * The socket must be already bound to an ethernet device, this device will be
+ * used for transmit. Pass fd -1 to unbind from the socket and the transmit
+ * device. This can be used to stop the ring (e.g. for migration). */
+#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
+
+/* Feature bits */
+/* Log all write descriptors. Can be changed while device is active. */
+#define VHOST_F_LOG_ALL 26
+/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
+#define VHOST_NET_F_VIRTIO_NET_HDR 27
+
+#endif
--git a/linux-headers/linux/virtio_config.h b/linux-headers/linux/virtio_config.h
new file mode 100644
index 0000000..4f51d8f
--- /dev/null
+++ b/linux-headers/linux/virtio_config.h
@@ -0,0 +1,54 @@
+#ifndef _LINUX_VIRTIO_CONFIG_H
+#define _LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+/* Virtio devices use a standardized configuration space to define their
+ * features and pass configuration information, but each implementation can
+ * store and access that space differently. */
+#include <linux/types.h>
+
+/* Status byte for guest to report progress, and synchronize features. */
+/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
+#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1
+/* We have found a driver for the device. */
+#define VIRTIO_CONFIG_S_DRIVER 2
+/* Driver has used its parts of the config, and is happy */
+#define VIRTIO_CONFIG_S_DRIVER_OK 4
+/* We've given up on this device. */
+#define VIRTIO_CONFIG_S_FAILED 0x80
+
+/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START 28
+#define VIRTIO_TRANSPORT_F_END 32
+
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY 24
+
+#endif /* _LINUX_VIRTIO_CONFIG_H */
--git a/linux-headers/linux/virtio_ring.h b/linux-headers/linux/virtio_ring.h
new file mode 100644
index 0000000..78289ee
--- /dev/null
+++ b/linux-headers/linux/virtio_ring.h
@@ -0,0 +1,163 @@
+#ifndef _LINUX_VIRTIO_RING_H
+#define _LINUX_VIRTIO_RING_H
+/* An interface for efficient virtio implementation, currently for use by KVM
+ * and lguest, but hopefully others soon. Do NOT change this since it will
+ * break existing servers and clients.
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright Rusty Russell IBM Corporation 2007. */
+#include <linux/types.h>
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT 1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE 2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT 4
+
+/* The Host uses this in used->flags to advise the Guest: don't kick me when
+ * you add a buffer. It's unreliable, so it's simply an optimization. Guest
+ * will still kick if it's out of buffers. */
+#define VRING_USED_F_NO_NOTIFY 1
+/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
+ * when you consume a buffer. It's unreliable, so it's simply an
+ * optimization. */
+#define VRING_AVAIL_F_NO_INTERRUPT 1
+
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC 28
+
+/* The Guest publishes the used index for which it expects an interrupt
+ * at the end of the avail ring. Host should ignore the avail->flags field. */
+/* The Host publishes the avail index for which it expects a kick
+ * at the end of the used ring. Guest should ignore the used->flags field. */
+#define VIRTIO_RING_F_EVENT_IDX 29
+
+/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */
+struct vring_desc {
+ /* Address (guest-physical). */
+ __u64 addr;
+ /* Length. */
+ __u32 len;
+ /* The flags as indicated above. */
+ __u16 flags;
+ /* We chain unused descriptors via this, too */
+ __u16 next;
+};
+
+struct vring_avail {
+ __u16 flags;
+ __u16 idx;
+ __u16 ring[];
+};
+
+/* u32 is used here for ids for padding reasons. */
+struct vring_used_elem {
+ /* Index of start of used descriptor chain. */
+ __u32 id;
+ /* Total length of the descriptor chain which was used (written to) */
+ __u32 len;
+};
+
+struct vring_used {
+ __u16 flags;
+ __u16 idx;
+ struct vring_used_elem ring[];
+};
+
+struct vring {
+ unsigned int num;
+
+ struct vring_desc *desc;
+
+ struct vring_avail *avail;
+
+ struct vring_used *used;
+};
+
+/* The standard layout for the ring is a continuous chunk of memory which looks
+ * like this. We assume num is a power of 2.
+ *
+ * struct vring
+ * {
+ * // The actual descriptors (16 bytes each)
+ * struct vring_desc desc[num];
+ *
+ * // A ring of available descriptor heads with free-running index.
+ * __u16 avail_flags;
+ * __u16 avail_idx;
+ * __u16 available[num];
+ * __u16 used_event_idx;
+ *
+ * // Padding to the next align boundary.
+ * char pad[];
+ *
+ * // A ring of used descriptor heads with free-running index.
+ * __u16 used_flags;
+ * __u16 used_idx;
+ * struct vring_used_elem used[num];
+ * __u16 avail_event_idx;
+ * };
+ */
+/* We publish the used event index at the end of the available ring, and vice
+ * versa. They are at the end for backwards compatibility. */
+#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
+#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
+
+static __inline__ void vring_init(struct vring *vr, unsigned int num, void *p,
+ unsigned long align)
+{
+ vr->num = num;
+ vr->desc = p;
+ vr->avail = p + num*sizeof(struct vring_desc);
+ vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + align-1)
+ & ~(align - 1));
+}
+
+static __inline__ unsigned vring_size(unsigned int num, unsigned long align)
+{
+ return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (2 + num)
+ + align - 1) & ~(align - 1))
+ + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
+}
+
+/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
+/* Assuming a given event_idx value from the other size, if
+ * we have just incremented index from old to new_idx,
+ * should we trigger an event? */
+static __inline__ int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
+{
+ /* Note: Xen has similar logic for notification hold-off
+ * in include/xen/interface/io/ring.h with req_event and req_prod
+ * corresponding to event_idx + 1 and new_idx respectively.
+ * Note also that req_event and req_prod in Xen start at 1,
+ * event indexes in virtio start at 0. */
+ return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
+}
+
+#endif /* _LINUX_VIRTIO_RING_H */
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 03/12] Switch build system to accompanied kernel headers
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:10 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel, Alexander Graf
This helps reducing our build-time checks for feature support in the
available Linux kernel headers. And it helps users that do not have
sufficiently recent headers installed on their build machine.
Consequently, the patch removes and build-time checks for kvm and vhost
in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
supposed to be provided by QEMU only.
s390 needs some extra love as it carries redefinitions from kernel
headers.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
Makefile.target | 4 +-
configure | 151 ++++++----------------------------------------
target-s390x/cpu.h | 10 ---
target-s390x/op_helper.c | 1 +
4 files changed, 21 insertions(+), 145 deletions(-)
diff --git a/Makefile.target b/Makefile.target
index 5c22df8..be9c0e8 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -14,7 +14,7 @@ endif
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
$(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
-QEMU_CFLAGS+= -I.. -I$(TARGET_PATH) -DNEED_CPU_H
+QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
include $(SRC_PATH)/Makefile.objs
@@ -37,8 +37,6 @@ ifndef CONFIG_HAIKU
LIBS+=-lm
endif
-kvm.o kvm-all.o vhost.o vhost_net.o kvmclock.o: QEMU_CFLAGS+=$(KVM_CFLAGS)
-
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
diff --git a/configure b/configure
index d38b952..0e1dc46 100755
--- a/configure
+++ b/configure
@@ -113,8 +113,7 @@ curl=""
curses=""
docs=""
fdt=""
-kvm=""
-kvm_para=""
+kvm="yes"
nptl=""
sdl=""
vnc="yes"
@@ -130,7 +129,7 @@ xen=""
xen_ctrl_version=""
linux_aio=""
attr=""
-vhost_net=""
+vhost_net="yes"
xfs=""
gprof="no"
@@ -165,7 +164,6 @@ guest_base=""
uname_release=""
io_thread="no"
mixemu="no"
-kerneldir=""
aix="no"
blobs="yes"
pkgversion=""
@@ -712,8 +710,6 @@ for opt do
;;
--disable-blobs) blobs="no"
;;
- --kerneldir=*) kerneldir="$optarg"
- ;;
--with-pkgversion=*) pkgversion=" ($optarg)"
;;
--disable-docs) docs="no"
@@ -1001,7 +997,6 @@ echo " --disable-attr disables attr and xattr support"
echo " --enable-attr enable attr and xattr support"
echo " --enable-io-thread enable IO thread"
echo " --disable-blobs disable installing provided firmware blobs"
-echo " --kerneldir=PATH look for kernel includes in PATH"
echo " --enable-docs enable documentation build"
echo " --disable-docs disable documentation build"
echo " --disable-vhost-net disable vhost-net acceleration support"
@@ -1766,124 +1761,6 @@ EOF
fi
##########################################
-# kvm probe
-if test "$kvm" != "no" ; then
- cat > $TMPC <<EOF
-#include <linux/kvm.h>
-#if !defined(KVM_API_VERSION) || KVM_API_VERSION < 12 || KVM_API_VERSION > 12
-#error Invalid KVM version
-#endif
-EOF
- must_have_caps="KVM_CAP_USER_MEMORY \
- KVM_CAP_DESTROY_MEMORY_REGION_WORKS \
- KVM_CAP_COALESCED_MMIO \
- KVM_CAP_SYNC_MMU \
- "
- if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) ; then
- must_have_caps="$caps \
- KVM_CAP_SET_TSS_ADDR \
- KVM_CAP_EXT_CPUID \
- KVM_CAP_CLOCKSOURCE \
- KVM_CAP_NOP_IO_DELAY \
- KVM_CAP_PV_MMU \
- KVM_CAP_MP_STATE \
- KVM_CAP_USER_NMI \
- "
- fi
- for c in $must_have_caps ; do
- cat >> $TMPC <<EOF
-#if !defined($c)
-#error Missing KVM capability $c
-#endif
-EOF
- done
- cat >> $TMPC <<EOF
-int main(void) { return 0; }
-EOF
- if test "$kerneldir" != "" ; then
- kvm_cflags=-I"$kerneldir"/include
- if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) \
- -a -d "$kerneldir/arch/x86/include" ; then
- kvm_cflags="$kvm_cflags -I$kerneldir/arch/x86/include"
- elif test "$cpu" = "ppc" -a -d "$kerneldir/arch/powerpc/include" ; then
- kvm_cflags="$kvm_cflags -I$kerneldir/arch/powerpc/include"
- elif test "$cpu" = "s390x" -a -d "$kerneldir/arch/s390/include" ; then
- kvm_cflags="$kvm_cflags -I$kerneldir/arch/s390/include"
- elif test -d "$kerneldir/arch/$cpu/include" ; then
- kvm_cflags="$kvm_cflags -I$kerneldir/arch/$cpu/include"
- fi
- else
- kvm_cflags=`$pkg_config --cflags kvm-kmod 2>/dev/null`
- fi
- if compile_prog "$kvm_cflags" "" ; then
- kvm=yes
- cat > $TMPC <<EOF
-#include <linux/kvm_para.h>
-int main(void) { return 0; }
-EOF
- if compile_prog "$kvm_cflags" "" ; then
- kvm_para=yes
- fi
- else
- if test "$kvm" = "yes" ; then
- if has awk && has grep; then
- kvmerr=`LANG=C $cc $QEMU_CFLAGS -o $TMPE $kvm_cflags $TMPC 2>&1 \
- | grep "error: " \
- | awk -F "error: " '{if (NR>1) printf(", "); printf("%s",$2);}'`
- if test "$kvmerr" != "" ; then
- echo -e "${kvmerr}\n\
-NOTE: To enable KVM support, update your kernel to 2.6.29+ or install \
-recent kvm-kmod from http://sourceforge.net/projects/kvm."
- fi
- fi
- feature_not_found "kvm"
- fi
- kvm=no
- fi
-fi
-
-##########################################
-# test for ppc kvm pvr setting
-
-if test "$kvm" = "yes" && test "$cpu" = "ppc" -o "$cpu" = "ppc64"; then
- cat > $TMPC <<EOF
- #include <asm/kvm.h>
- int main(void) { struct kvm_sregs s; s.pvr = 0; return 0; }
-EOF
- if compile_prog "$kvm_cflags" "" ; then
- kvm_ppc_pvr=yes
- else
- kvm_ppc_pvr=no
- fi
-fi
-
-##########################################
-# test for vhost net
-
-if test "$vhost_net" != "no"; then
- if test "$kvm" != "no"; then
- cat > $TMPC <<EOF
- #include <linux/vhost.h>
- int main(void) { return 0; }
-EOF
- if compile_prog "$kvm_cflags" "" ; then
- vhost_net=yes
- else
- if test "$vhost_net" = "yes" ; then
- feature_not_found "vhost-net"
- fi
- vhost_net=no
- fi
- else
- if test "$vhost_net" = "yes" ; then
- echo "NOTE: vhost-net feature requires KVM (--enable-kvm)."
- feature_not_found "vhost-net"
- fi
- vhost_net=no
- fi
-fi
-
-##########################################
# pthread probe
PTHREADLIBS_LIST="-lpthread -lpthreadGC2"
@@ -3341,16 +3218,11 @@ case "$target_arch2" in
\( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \
\( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then
echo "CONFIG_KVM=y" >> $config_target_mak
- echo "KVM_CFLAGS=$kvm_cflags" >> $config_target_mak
- if test "$kvm_para" = "yes"; then
- echo "CONFIG_KVM_PARA=y" >> $config_target_mak
- fi
+ echo "CONFIG_KVM_PARA=y" >> $config_target_mak
if test $vhost_net = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
fi
- if test "$kvm_ppc_pvr" = "yes" ; then
- echo "CONFIG_KVM_PPC_PVR=y" >> $config_target_mak
- fi
+ echo "CONFIG_KVM_PPC_PVR=y" >> $config_target_mak
fi
esac
if test "$target_bigendian" = "yes" ; then
@@ -3541,6 +3413,21 @@ if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
esac
fi
+# use included Linux headers
+includes="-I\$(SRC_PATH)/linux-headers $includes"
+mkdir -p linux-headers
+case "$cpu" in
+i386|x86_64)
+ symlink $source_path/linux-headers/asm-x86 linux-headers/asm
+ ;;
+ppcemb|ppc|ppc64)
+ symlink $source_path/linux-headers/asm-x86 linux-headers/asm
+ ;;
+s390x)
+ symlink $source_path/linux-headers/asm-s390 linux-headers/asm
+ ;;
+esac
+
echo "LDFLAGS+=$ldflags" >> $config_target_mak
echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
echo "QEMU_INCLUDES+=$includes" >> $config_target_mak
diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
index 4e5c391..b5e587f 100644
--- a/target-s390x/cpu.h
+++ b/target-s390x/cpu.h
@@ -313,16 +313,6 @@ CPUState *s390_cpu_addr2state(uint16_t cpu_addr);
/* from s390-virtio-bus */
extern const target_phys_addr_t virtio_size;
-#ifndef KVM_S390_SIGP_STOP
-#define KVM_S390_SIGP_STOP 0
-#define KVM_S390_PROGRAM_INT 0
-#define KVM_S390_SIGP_SET_PREFIX 0
-#define KVM_S390_RESTART 0
-#define KVM_S390_INT_VIRTIO 0
-#define KVM_S390_INT_SERVICE 0
-#define KVM_S390_INT_EMERGENCY 0
-#endif
-
#endif
void cpu_lock(void);
void cpu_unlock(void);
diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
index db03a79..9429698 100644
--- a/target-s390x/op_helper.c
+++ b/target-s390x/op_helper.c
@@ -23,6 +23,7 @@
#include "helpers.h"
#include <string.h>
#include "kvm.h"
+#include <linux/kvm.h>
#include "qemu-timer.h"
/*****************************************************************************/
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 03/12] Switch build system to accompanied kernel headers
@ 2011-06-08 14:10 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm, Alexander Graf
This helps reducing our build-time checks for feature support in the
available Linux kernel headers. And it helps users that do not have
sufficiently recent headers installed on their build machine.
Consequently, the patch removes and build-time checks for kvm and vhost
in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
supposed to be provided by QEMU only.
s390 needs some extra love as it carries redefinitions from kernel
headers.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
Makefile.target | 4 +-
configure | 151 ++++++----------------------------------------
target-s390x/cpu.h | 10 ---
target-s390x/op_helper.c | 1 +
4 files changed, 21 insertions(+), 145 deletions(-)
diff --git a/Makefile.target b/Makefile.target
index 5c22df8..be9c0e8 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -14,7 +14,7 @@ endif
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
$(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
-QEMU_CFLAGS+= -I.. -I$(TARGET_PATH) -DNEED_CPU_H
+QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
include $(SRC_PATH)/Makefile.objs
@@ -37,8 +37,6 @@ ifndef CONFIG_HAIKU
LIBS+=-lm
endif
-kvm.o kvm-all.o vhost.o vhost_net.o kvmclock.o: QEMU_CFLAGS+=$(KVM_CFLAGS)
-
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
diff --git a/configure b/configure
index d38b952..0e1dc46 100755
--- a/configure
+++ b/configure
@@ -113,8 +113,7 @@ curl=""
curses=""
docs=""
fdt=""
-kvm=""
-kvm_para=""
+kvm="yes"
nptl=""
sdl=""
vnc="yes"
@@ -130,7 +129,7 @@ xen=""
xen_ctrl_version=""
linux_aio=""
attr=""
-vhost_net=""
+vhost_net="yes"
xfs=""
gprof="no"
@@ -165,7 +164,6 @@ guest_base=""
uname_release=""
io_thread="no"
mixemu="no"
-kerneldir=""
aix="no"
blobs="yes"
pkgversion=""
@@ -712,8 +710,6 @@ for opt do
;;
--disable-blobs) blobs="no"
;;
- --kerneldir=*) kerneldir="$optarg"
- ;;
--with-pkgversion=*) pkgversion=" ($optarg)"
;;
--disable-docs) docs="no"
@@ -1001,7 +997,6 @@ echo " --disable-attr disables attr and xattr support"
echo " --enable-attr enable attr and xattr support"
echo " --enable-io-thread enable IO thread"
echo " --disable-blobs disable installing provided firmware blobs"
-echo " --kerneldir=PATH look for kernel includes in PATH"
echo " --enable-docs enable documentation build"
echo " --disable-docs disable documentation build"
echo " --disable-vhost-net disable vhost-net acceleration support"
@@ -1766,124 +1761,6 @@ EOF
fi
##########################################
-# kvm probe
-if test "$kvm" != "no" ; then
- cat > $TMPC <<EOF
-#include <linux/kvm.h>
-#if !defined(KVM_API_VERSION) || KVM_API_VERSION < 12 || KVM_API_VERSION > 12
-#error Invalid KVM version
-#endif
-EOF
- must_have_caps="KVM_CAP_USER_MEMORY \
- KVM_CAP_DESTROY_MEMORY_REGION_WORKS \
- KVM_CAP_COALESCED_MMIO \
- KVM_CAP_SYNC_MMU \
- "
- if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) ; then
- must_have_caps="$caps \
- KVM_CAP_SET_TSS_ADDR \
- KVM_CAP_EXT_CPUID \
- KVM_CAP_CLOCKSOURCE \
- KVM_CAP_NOP_IO_DELAY \
- KVM_CAP_PV_MMU \
- KVM_CAP_MP_STATE \
- KVM_CAP_USER_NMI \
- "
- fi
- for c in $must_have_caps ; do
- cat >> $TMPC <<EOF
-#if !defined($c)
-#error Missing KVM capability $c
-#endif
-EOF
- done
- cat >> $TMPC <<EOF
-int main(void) { return 0; }
-EOF
- if test "$kerneldir" != "" ; then
- kvm_cflags=-I"$kerneldir"/include
- if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) \
- -a -d "$kerneldir/arch/x86/include" ; then
- kvm_cflags="$kvm_cflags -I$kerneldir/arch/x86/include"
- elif test "$cpu" = "ppc" -a -d "$kerneldir/arch/powerpc/include" ; then
- kvm_cflags="$kvm_cflags -I$kerneldir/arch/powerpc/include"
- elif test "$cpu" = "s390x" -a -d "$kerneldir/arch/s390/include" ; then
- kvm_cflags="$kvm_cflags -I$kerneldir/arch/s390/include"
- elif test -d "$kerneldir/arch/$cpu/include" ; then
- kvm_cflags="$kvm_cflags -I$kerneldir/arch/$cpu/include"
- fi
- else
- kvm_cflags=`$pkg_config --cflags kvm-kmod 2>/dev/null`
- fi
- if compile_prog "$kvm_cflags" "" ; then
- kvm=yes
- cat > $TMPC <<EOF
-#include <linux/kvm_para.h>
-int main(void) { return 0; }
-EOF
- if compile_prog "$kvm_cflags" "" ; then
- kvm_para=yes
- fi
- else
- if test "$kvm" = "yes" ; then
- if has awk && has grep; then
- kvmerr=`LANG=C $cc $QEMU_CFLAGS -o $TMPE $kvm_cflags $TMPC 2>&1 \
- | grep "error: " \
- | awk -F "error: " '{if (NR>1) printf(", "); printf("%s",$2);}'`
- if test "$kvmerr" != "" ; then
- echo -e "${kvmerr}\n\
-NOTE: To enable KVM support, update your kernel to 2.6.29+ or install \
-recent kvm-kmod from http://sourceforge.net/projects/kvm."
- fi
- fi
- feature_not_found "kvm"
- fi
- kvm=no
- fi
-fi
-
-##########################################
-# test for ppc kvm pvr setting
-
-if test "$kvm" = "yes" && test "$cpu" = "ppc" -o "$cpu" = "ppc64"; then
- cat > $TMPC <<EOF
- #include <asm/kvm.h>
- int main(void) { struct kvm_sregs s; s.pvr = 0; return 0; }
-EOF
- if compile_prog "$kvm_cflags" "" ; then
- kvm_ppc_pvr=yes
- else
- kvm_ppc_pvr=no
- fi
-fi
-
-##########################################
-# test for vhost net
-
-if test "$vhost_net" != "no"; then
- if test "$kvm" != "no"; then
- cat > $TMPC <<EOF
- #include <linux/vhost.h>
- int main(void) { return 0; }
-EOF
- if compile_prog "$kvm_cflags" "" ; then
- vhost_net=yes
- else
- if test "$vhost_net" = "yes" ; then
- feature_not_found "vhost-net"
- fi
- vhost_net=no
- fi
- else
- if test "$vhost_net" = "yes" ; then
- echo "NOTE: vhost-net feature requires KVM (--enable-kvm)."
- feature_not_found "vhost-net"
- fi
- vhost_net=no
- fi
-fi
-
-##########################################
# pthread probe
PTHREADLIBS_LIST="-lpthread -lpthreadGC2"
@@ -3341,16 +3218,11 @@ case "$target_arch2" in
\( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \
\( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then
echo "CONFIG_KVM=y" >> $config_target_mak
- echo "KVM_CFLAGS=$kvm_cflags" >> $config_target_mak
- if test "$kvm_para" = "yes"; then
- echo "CONFIG_KVM_PARA=y" >> $config_target_mak
- fi
+ echo "CONFIG_KVM_PARA=y" >> $config_target_mak
if test $vhost_net = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
fi
- if test "$kvm_ppc_pvr" = "yes" ; then
- echo "CONFIG_KVM_PPC_PVR=y" >> $config_target_mak
- fi
+ echo "CONFIG_KVM_PPC_PVR=y" >> $config_target_mak
fi
esac
if test "$target_bigendian" = "yes" ; then
@@ -3541,6 +3413,21 @@ if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
esac
fi
+# use included Linux headers
+includes="-I\$(SRC_PATH)/linux-headers $includes"
+mkdir -p linux-headers
+case "$cpu" in
+i386|x86_64)
+ symlink $source_path/linux-headers/asm-x86 linux-headers/asm
+ ;;
+ppcemb|ppc|ppc64)
+ symlink $source_path/linux-headers/asm-x86 linux-headers/asm
+ ;;
+s390x)
+ symlink $source_path/linux-headers/asm-s390 linux-headers/asm
+ ;;
+esac
+
echo "LDFLAGS+=$ldflags" >> $config_target_mak
echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
echo "QEMU_INCLUDES+=$includes" >> $config_target_mak
diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
index 4e5c391..b5e587f 100644
--- a/target-s390x/cpu.h
+++ b/target-s390x/cpu.h
@@ -313,16 +313,6 @@ CPUState *s390_cpu_addr2state(uint16_t cpu_addr);
/* from s390-virtio-bus */
extern const target_phys_addr_t virtio_size;
-#ifndef KVM_S390_SIGP_STOP
-#define KVM_S390_SIGP_STOP 0
-#define KVM_S390_PROGRAM_INT 0
-#define KVM_S390_SIGP_SET_PREFIX 0
-#define KVM_S390_RESTART 0
-#define KVM_S390_INT_VIRTIO 0
-#define KVM_S390_INT_SERVICE 0
-#define KVM_S390_INT_EMERGENCY 0
-#endif
-
#endif
void cpu_lock(void);
void cpu_unlock(void);
diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
index db03a79..9429698 100644
--- a/target-s390x/op_helper.c
+++ b/target-s390x/op_helper.c
@@ -23,6 +23,7 @@
#include "helpers.h"
#include <string.h>
#include "kvm.h"
+#include <linux/kvm.h>
#include "qemu-timer.h"
/*****************************************************************************/
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [PATCH 03/12] Switch build system to accompanied kernel headers
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-14 11:11 ` Alexander Graf
-1 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:11 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 1880 bytes --]
On 08.06.2011, at 16:10, Jan Kiszka wrote:
> This helps reducing our build-time checks for feature support in the
> available Linux kernel headers. And it helps users that do not have
> sufficiently recent headers installed on their build machine.
>
> Consequently, the patch removes and build-time checks for kvm and vhost
> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
> supposed to be provided by QEMU only.
>
> s390 needs some extra love as it carries redefinitions from kernel
> headers.
Yes. I was wondering if we should unconditionally include the kernel headers there. The problem I'm seeing there is that I don't know if that would work fine on non-Linux hosts, as that code definitely gets compiled there, while KVM code is not.
>
>
[...]
> diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
> index 4e5c391..b5e587f 100644
> --- a/target-s390x/cpu.h
> +++ b/target-s390x/cpu.h
> @@ -313,16 +313,6 @@ CPUState *s390_cpu_addr2state(uint16_t cpu_addr);
> /* from s390-virtio-bus */
> extern const target_phys_addr_t virtio_size;
>
> -#ifndef KVM_S390_SIGP_STOP
> -#define KVM_S390_SIGP_STOP 0
> -#define KVM_S390_PROGRAM_INT 0
> -#define KVM_S390_SIGP_SET_PREFIX 0
> -#define KVM_S390_RESTART 0
> -#define KVM_S390_INT_VIRTIO 0
> -#define KVM_S390_INT_SERVICE 0
> -#define KVM_S390_INT_EMERGENCY 0
> -#endif
> -
> #endif
> void cpu_lock(void);
> void cpu_unlock(void);
> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
> index db03a79..9429698 100644
> --- a/target-s390x/op_helper.c
> +++ b/target-s390x/op_helper.c
> @@ -23,6 +23,7 @@
> #include "helpers.h"
> #include <string.h>
> #include "kvm.h"
> +#include <linux/kvm.h>
Have you tried to compile this on non-Linux?
Alex
[-- Attachment #2: Type: text/html, Size: 2852 bytes --]
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 03/12] Switch build system to accompanied kernel headers
@ 2011-06-14 11:11 ` Alexander Graf
0 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:11 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 1880 bytes --]
On 08.06.2011, at 16:10, Jan Kiszka wrote:
> This helps reducing our build-time checks for feature support in the
> available Linux kernel headers. And it helps users that do not have
> sufficiently recent headers installed on their build machine.
>
> Consequently, the patch removes and build-time checks for kvm and vhost
> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
> supposed to be provided by QEMU only.
>
> s390 needs some extra love as it carries redefinitions from kernel
> headers.
Yes. I was wondering if we should unconditionally include the kernel headers there. The problem I'm seeing there is that I don't know if that would work fine on non-Linux hosts, as that code definitely gets compiled there, while KVM code is not.
>
>
[...]
> diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
> index 4e5c391..b5e587f 100644
> --- a/target-s390x/cpu.h
> +++ b/target-s390x/cpu.h
> @@ -313,16 +313,6 @@ CPUState *s390_cpu_addr2state(uint16_t cpu_addr);
> /* from s390-virtio-bus */
> extern const target_phys_addr_t virtio_size;
>
> -#ifndef KVM_S390_SIGP_STOP
> -#define KVM_S390_SIGP_STOP 0
> -#define KVM_S390_PROGRAM_INT 0
> -#define KVM_S390_SIGP_SET_PREFIX 0
> -#define KVM_S390_RESTART 0
> -#define KVM_S390_INT_VIRTIO 0
> -#define KVM_S390_INT_SERVICE 0
> -#define KVM_S390_INT_EMERGENCY 0
> -#endif
> -
> #endif
> void cpu_lock(void);
> void cpu_unlock(void);
> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
> index db03a79..9429698 100644
> --- a/target-s390x/op_helper.c
> +++ b/target-s390x/op_helper.c
> @@ -23,6 +23,7 @@
> #include "helpers.h"
> #include <string.h>
> #include "kvm.h"
> +#include <linux/kvm.h>
Have you tried to compile this on non-Linux?
Alex
[-- Attachment #2: Type: text/html, Size: 2852 bytes --]
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [PATCH 03/12] Switch build system to accompanied kernel headers
2011-06-14 11:11 ` [Qemu-devel] " Alexander Graf
@ 2011-06-14 11:21 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-14 11:21 UTC (permalink / raw)
To: Alexander Graf; +Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel
On 2011-06-14 13:11, Alexander Graf wrote:
>
> On 08.06.2011, at 16:10, Jan Kiszka wrote:
>
> This helps reducing our build-time checks for feature support in the
> available Linux kernel headers. And it helps users that do not have
> sufficiently recent headers installed on their build machine.
>
> Consequently, the patch removes and build-time checks for kvm and vhost
> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
> supposed to be provided by QEMU only.
>
> s390 needs some extra love as it carries redefinitions from kernel
> headers.
>
> Yes. I was wondering if we should unconditionally include the kernel headers there. The problem I'm seeing there is that I don't know if that would work fine on non-Linux hosts, as that code definitely gets compiled there, while KVM code is not.
>
>
>
> [...]
>
> diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
> index 4e5c391..b5e587f 100644
> --- a/target-s390x/cpu.h
> +++ b/target-s390x/cpu.h
> @@ -313,16 +313,6 @@ CPUState *s390_cpu_addr2state(uint16_t cpu_addr);
> /* from s390-virtio-bus */
> extern const target_phys_addr_t virtio_size;
>
> -#ifndef KVM_S390_SIGP_STOP
> -#define KVM_S390_SIGP_STOP 0
> -#define KVM_S390_PROGRAM_INT 0
> -#define KVM_S390_SIGP_SET_PREFIX 0
> -#define KVM_S390_RESTART 0
> -#define KVM_S390_INT_VIRTIO 0
> -#define KVM_S390_INT_SERVICE 0
> -#define KVM_S390_INT_EMERGENCY 0
> -#endif
> -
> #endif
> void cpu_lock(void);
> void cpu_unlock(void);
> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
> index db03a79..9429698 100644
> --- a/target-s390x/op_helper.c
> +++ b/target-s390x/op_helper.c
> @@ -23,6 +23,7 @@
> #include "helpers.h"
> #include <string.h>
> #include "kvm.h"
> +#include <linux/kvm.h>
>
> Have you tried to compile this on non-Linux?
Sorry, I don't have "non-Linux" around. :) Do you expect build problems
with that header? Why?
BTW, if you depend on KVM_* constants for non-KVM builds, that looks a
bit fishy to me. Why is that code built at all in that setup?
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 03/12] Switch build system to accompanied kernel headers
@ 2011-06-14 11:21 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-14 11:21 UTC (permalink / raw)
To: Alexander Graf; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On 2011-06-14 13:11, Alexander Graf wrote:
>
> On 08.06.2011, at 16:10, Jan Kiszka wrote:
>
> This helps reducing our build-time checks for feature support in the
> available Linux kernel headers. And it helps users that do not have
> sufficiently recent headers installed on their build machine.
>
> Consequently, the patch removes and build-time checks for kvm and vhost
> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
> supposed to be provided by QEMU only.
>
> s390 needs some extra love as it carries redefinitions from kernel
> headers.
>
> Yes. I was wondering if we should unconditionally include the kernel headers there. The problem I'm seeing there is that I don't know if that would work fine on non-Linux hosts, as that code definitely gets compiled there, while KVM code is not.
>
>
>
> [...]
>
> diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
> index 4e5c391..b5e587f 100644
> --- a/target-s390x/cpu.h
> +++ b/target-s390x/cpu.h
> @@ -313,16 +313,6 @@ CPUState *s390_cpu_addr2state(uint16_t cpu_addr);
> /* from s390-virtio-bus */
> extern const target_phys_addr_t virtio_size;
>
> -#ifndef KVM_S390_SIGP_STOP
> -#define KVM_S390_SIGP_STOP 0
> -#define KVM_S390_PROGRAM_INT 0
> -#define KVM_S390_SIGP_SET_PREFIX 0
> -#define KVM_S390_RESTART 0
> -#define KVM_S390_INT_VIRTIO 0
> -#define KVM_S390_INT_SERVICE 0
> -#define KVM_S390_INT_EMERGENCY 0
> -#endif
> -
> #endif
> void cpu_lock(void);
> void cpu_unlock(void);
> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
> index db03a79..9429698 100644
> --- a/target-s390x/op_helper.c
> +++ b/target-s390x/op_helper.c
> @@ -23,6 +23,7 @@
> #include "helpers.h"
> #include <string.h>
> #include "kvm.h"
> +#include <linux/kvm.h>
>
> Have you tried to compile this on non-Linux?
Sorry, I don't have "non-Linux" around. :) Do you expect build problems
with that header? Why?
BTW, if you depend on KVM_* constants for non-KVM builds, that looks a
bit fishy to me. Why is that code built at all in that setup?
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [PATCH 03/12] Switch build system to accompanied kernel headers
2011-06-14 11:21 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-14 11:28 ` Alexander Graf
-1 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:28 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel
On 14.06.2011, at 13:21, Jan Kiszka wrote:
> On 2011-06-14 13:11, Alexander Graf wrote:
>>
>> On 08.06.2011, at 16:10, Jan Kiszka wrote:
>>
>> This helps reducing our build-time checks for feature support in the
>> available Linux kernel headers. And it helps users that do not have
>> sufficiently recent headers installed on their build machine.
>>
>> Consequently, the patch removes and build-time checks for kvm and vhost
>> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
>> supposed to be provided by QEMU only.
>>
>> s390 needs some extra love as it carries redefinitions from kernel
>> headers.
>>
>> Yes. I was wondering if we should unconditionally include the kernel headers there. The problem I'm seeing there is that I don't know if that would work fine on non-Linux hosts, as that code definitely gets compiled there, while KVM code is not.
>>
>>
>>
>> [...]
>>
>> diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
>> index 4e5c391..b5e587f 100644
>> --- a/target-s390x/cpu.h
>> +++ b/target-s390x/cpu.h
>> @@ -313,16 +313,6 @@ CPUState *s390_cpu_addr2state(uint16_t cpu_addr);
>> /* from s390-virtio-bus */
>> extern const target_phys_addr_t virtio_size;
>>
>> -#ifndef KVM_S390_SIGP_STOP
>> -#define KVM_S390_SIGP_STOP 0
>> -#define KVM_S390_PROGRAM_INT 0
>> -#define KVM_S390_SIGP_SET_PREFIX 0
>> -#define KVM_S390_RESTART 0
>> -#define KVM_S390_INT_VIRTIO 0
>> -#define KVM_S390_INT_SERVICE 0
>> -#define KVM_S390_INT_EMERGENCY 0
>> -#endif
>> -
>> #endif
>> void cpu_lock(void);
>> void cpu_unlock(void);
>> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
>> index db03a79..9429698 100644
>> --- a/target-s390x/op_helper.c
>> +++ b/target-s390x/op_helper.c
>> @@ -23,6 +23,7 @@
>> #include "helpers.h"
>> #include <string.h>
>> #include "kvm.h"
>> +#include <linux/kvm.h>
>>
>> Have you tried to compile this on non-Linux?
>
> Sorry, I don't have "non-Linux" around. :) Do you expect build problems
> with that header? Why?
Do you have a git tree handy? I can give a Mac build a try then.
> BTW, if you depend on KVM_* constants for non-KVM builds, that looks a
> bit fishy to me. Why is that code built at all in that setup?
The reason for that is that I didn't want to clutter the emulation code with #ifdefs:
static void program_interrupt(CPUState *env, uint32_t code, int ilc)
{
qemu_log("program interrupt at %#" PRIx64 "\n", env->psw.addr);
if (kvm_enabled()) {
kvm_s390_interrupt(env, KVM_S390_PROGRAM_INT, code);
} else {
env->int_pgm_code = code;
env->int_pgm_ilc = ilc;
env->exception_index = EXCP_PGM;
cpu_loop_exit();
}
}
This breaks compilation when KVM_S390_PROGRAM_INT is not defined. I'm very open to suggestions on how to improve this though :).
Alex
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 03/12] Switch build system to accompanied kernel headers
@ 2011-06-14 11:28 ` Alexander Graf
0 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:28 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On 14.06.2011, at 13:21, Jan Kiszka wrote:
> On 2011-06-14 13:11, Alexander Graf wrote:
>>
>> On 08.06.2011, at 16:10, Jan Kiszka wrote:
>>
>> This helps reducing our build-time checks for feature support in the
>> available Linux kernel headers. And it helps users that do not have
>> sufficiently recent headers installed on their build machine.
>>
>> Consequently, the patch removes and build-time checks for kvm and vhost
>> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
>> supposed to be provided by QEMU only.
>>
>> s390 needs some extra love as it carries redefinitions from kernel
>> headers.
>>
>> Yes. I was wondering if we should unconditionally include the kernel headers there. The problem I'm seeing there is that I don't know if that would work fine on non-Linux hosts, as that code definitely gets compiled there, while KVM code is not.
>>
>>
>>
>> [...]
>>
>> diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
>> index 4e5c391..b5e587f 100644
>> --- a/target-s390x/cpu.h
>> +++ b/target-s390x/cpu.h
>> @@ -313,16 +313,6 @@ CPUState *s390_cpu_addr2state(uint16_t cpu_addr);
>> /* from s390-virtio-bus */
>> extern const target_phys_addr_t virtio_size;
>>
>> -#ifndef KVM_S390_SIGP_STOP
>> -#define KVM_S390_SIGP_STOP 0
>> -#define KVM_S390_PROGRAM_INT 0
>> -#define KVM_S390_SIGP_SET_PREFIX 0
>> -#define KVM_S390_RESTART 0
>> -#define KVM_S390_INT_VIRTIO 0
>> -#define KVM_S390_INT_SERVICE 0
>> -#define KVM_S390_INT_EMERGENCY 0
>> -#endif
>> -
>> #endif
>> void cpu_lock(void);
>> void cpu_unlock(void);
>> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
>> index db03a79..9429698 100644
>> --- a/target-s390x/op_helper.c
>> +++ b/target-s390x/op_helper.c
>> @@ -23,6 +23,7 @@
>> #include "helpers.h"
>> #include <string.h>
>> #include "kvm.h"
>> +#include <linux/kvm.h>
>>
>> Have you tried to compile this on non-Linux?
>
> Sorry, I don't have "non-Linux" around. :) Do you expect build problems
> with that header? Why?
Do you have a git tree handy? I can give a Mac build a try then.
> BTW, if you depend on KVM_* constants for non-KVM builds, that looks a
> bit fishy to me. Why is that code built at all in that setup?
The reason for that is that I didn't want to clutter the emulation code with #ifdefs:
static void program_interrupt(CPUState *env, uint32_t code, int ilc)
{
qemu_log("program interrupt at %#" PRIx64 "\n", env->psw.addr);
if (kvm_enabled()) {
kvm_s390_interrupt(env, KVM_S390_PROGRAM_INT, code);
} else {
env->int_pgm_code = code;
env->int_pgm_ilc = ilc;
env->exception_index = EXCP_PGM;
cpu_loop_exit();
}
}
This breaks compilation when KVM_S390_PROGRAM_INT is not defined. I'm very open to suggestions on how to improve this though :).
Alex
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [PATCH 03/12] Switch build system to accompanied kernel headers
2011-06-14 11:28 ` [Qemu-devel] " Alexander Graf
@ 2011-06-14 11:32 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-14 11:32 UTC (permalink / raw)
To: Alexander Graf; +Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel
On 2011-06-14 13:28, Alexander Graf wrote:
>
> On 14.06.2011, at 13:21, Jan Kiszka wrote:
>
>> On 2011-06-14 13:11, Alexander Graf wrote:
>>>
>>> On 08.06.2011, at 16:10, Jan Kiszka wrote:
>>>
>>> This helps reducing our build-time checks for feature support in the
>>> available Linux kernel headers. And it helps users that do not have
>>> sufficiently recent headers installed on their build machine.
>>>
>>> Consequently, the patch removes and build-time checks for kvm and vhost
>>> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
>>> supposed to be provided by QEMU only.
>>>
>>> s390 needs some extra love as it carries redefinitions from kernel
>>> headers.
>>>
>>> Yes. I was wondering if we should unconditionally include the kernel headers there. The problem I'm seeing there is that I don't know if that would work fine on non-Linux hosts, as that code definitely gets compiled there, while KVM code is not.
>>>
>>>
>>>
>>> [...]
>>>
>>> diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
>>> index 4e5c391..b5e587f 100644
>>> --- a/target-s390x/cpu.h
>>> +++ b/target-s390x/cpu.h
>>> @@ -313,16 +313,6 @@ CPUState *s390_cpu_addr2state(uint16_t cpu_addr);
>>> /* from s390-virtio-bus */
>>> extern const target_phys_addr_t virtio_size;
>>>
>>> -#ifndef KVM_S390_SIGP_STOP
>>> -#define KVM_S390_SIGP_STOP 0
>>> -#define KVM_S390_PROGRAM_INT 0
>>> -#define KVM_S390_SIGP_SET_PREFIX 0
>>> -#define KVM_S390_RESTART 0
>>> -#define KVM_S390_INT_VIRTIO 0
>>> -#define KVM_S390_INT_SERVICE 0
>>> -#define KVM_S390_INT_EMERGENCY 0
>>> -#endif
>>> -
>>> #endif
>>> void cpu_lock(void);
>>> void cpu_unlock(void);
>>> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
>>> index db03a79..9429698 100644
>>> --- a/target-s390x/op_helper.c
>>> +++ b/target-s390x/op_helper.c
>>> @@ -23,6 +23,7 @@
>>> #include "helpers.h"
>>> #include <string.h>
>>> #include "kvm.h"
>>> +#include <linux/kvm.h>
>>>
>>> Have you tried to compile this on non-Linux?
>>
>> Sorry, I don't have "non-Linux" around. :) Do you expect build problems
>> with that header? Why?
>
> Do you have a git tree handy? I can give a Mac build a try then.
Try git://git.kiszka.org/qemu-kvm.git queues/kvm-upstream
>
>> BTW, if you depend on KVM_* constants for non-KVM builds, that looks a
>> bit fishy to me. Why is that code built at all in that setup?
>
> The reason for that is that I didn't want to clutter the emulation code with #ifdefs:
>
> static void program_interrupt(CPUState *env, uint32_t code, int ilc)
> {
> qemu_log("program interrupt at %#" PRIx64 "\n", env->psw.addr);
>
> if (kvm_enabled()) {
> kvm_s390_interrupt(env, KVM_S390_PROGRAM_INT, code);
> } else {
> env->int_pgm_code = code;
> env->int_pgm_ilc = ilc;
> env->exception_index = EXCP_PGM;
> cpu_loop_exit();
> }
> }
>
> This breaks compilation when KVM_S390_PROGRAM_INT is not defined. I'm very open to suggestions on how to improve this though :).
Callbacks? See cpu_interrupt_handler e.g.
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 03/12] Switch build system to accompanied kernel headers
@ 2011-06-14 11:32 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-14 11:32 UTC (permalink / raw)
To: Alexander Graf; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On 2011-06-14 13:28, Alexander Graf wrote:
>
> On 14.06.2011, at 13:21, Jan Kiszka wrote:
>
>> On 2011-06-14 13:11, Alexander Graf wrote:
>>>
>>> On 08.06.2011, at 16:10, Jan Kiszka wrote:
>>>
>>> This helps reducing our build-time checks for feature support in the
>>> available Linux kernel headers. And it helps users that do not have
>>> sufficiently recent headers installed on their build machine.
>>>
>>> Consequently, the patch removes and build-time checks for kvm and vhost
>>> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
>>> supposed to be provided by QEMU only.
>>>
>>> s390 needs some extra love as it carries redefinitions from kernel
>>> headers.
>>>
>>> Yes. I was wondering if we should unconditionally include the kernel headers there. The problem I'm seeing there is that I don't know if that would work fine on non-Linux hosts, as that code definitely gets compiled there, while KVM code is not.
>>>
>>>
>>>
>>> [...]
>>>
>>> diff --git a/target-s390x/cpu.h b/target-s390x/cpu.h
>>> index 4e5c391..b5e587f 100644
>>> --- a/target-s390x/cpu.h
>>> +++ b/target-s390x/cpu.h
>>> @@ -313,16 +313,6 @@ CPUState *s390_cpu_addr2state(uint16_t cpu_addr);
>>> /* from s390-virtio-bus */
>>> extern const target_phys_addr_t virtio_size;
>>>
>>> -#ifndef KVM_S390_SIGP_STOP
>>> -#define KVM_S390_SIGP_STOP 0
>>> -#define KVM_S390_PROGRAM_INT 0
>>> -#define KVM_S390_SIGP_SET_PREFIX 0
>>> -#define KVM_S390_RESTART 0
>>> -#define KVM_S390_INT_VIRTIO 0
>>> -#define KVM_S390_INT_SERVICE 0
>>> -#define KVM_S390_INT_EMERGENCY 0
>>> -#endif
>>> -
>>> #endif
>>> void cpu_lock(void);
>>> void cpu_unlock(void);
>>> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
>>> index db03a79..9429698 100644
>>> --- a/target-s390x/op_helper.c
>>> +++ b/target-s390x/op_helper.c
>>> @@ -23,6 +23,7 @@
>>> #include "helpers.h"
>>> #include <string.h>
>>> #include "kvm.h"
>>> +#include <linux/kvm.h>
>>>
>>> Have you tried to compile this on non-Linux?
>>
>> Sorry, I don't have "non-Linux" around. :) Do you expect build problems
>> with that header? Why?
>
> Do you have a git tree handy? I can give a Mac build a try then.
Try git://git.kiszka.org/qemu-kvm.git queues/kvm-upstream
>
>> BTW, if you depend on KVM_* constants for non-KVM builds, that looks a
>> bit fishy to me. Why is that code built at all in that setup?
>
> The reason for that is that I didn't want to clutter the emulation code with #ifdefs:
>
> static void program_interrupt(CPUState *env, uint32_t code, int ilc)
> {
> qemu_log("program interrupt at %#" PRIx64 "\n", env->psw.addr);
>
> if (kvm_enabled()) {
> kvm_s390_interrupt(env, KVM_S390_PROGRAM_INT, code);
> } else {
> env->int_pgm_code = code;
> env->int_pgm_ilc = ilc;
> env->exception_index = EXCP_PGM;
> cpu_loop_exit();
> }
> }
>
> This breaks compilation when KVM_S390_PROGRAM_INT is not defined. I'm very open to suggestions on how to improve this though :).
Callbacks? See cpu_interrupt_handler e.g.
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [PATCH 03/12] Switch build system to accompanied kernel headers
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-22 20:51 ` Stefan Weil
-1 siblings, 0 replies; 90+ messages in thread
From: Stefan Weil @ 2011-06-22 20:51 UTC (permalink / raw)
To: Jan Kiszka
Cc: Anthony Liguori, kvm, Marcelo Tosatti, Alexander Graf,
qemu-devel, Avi Kivity
Am 08.06.2011 16:10, schrieb Jan Kiszka:
> This helps reducing our build-time checks for feature support in the
> available Linux kernel headers. And it helps users that do not have
> sufficiently recent headers installed on their build machine.
>
> Consequently, the patch removes and build-time checks for kvm and vhost
> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
> supposed to be provided by QEMU only.
>
> s390 needs some extra love as it carries redefinitions from kernel
> headers.
>
> CC: Alexander Graf <agraf@suse.de>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
> Makefile.target | 4 +-
> configure | 151 ++++++----------------------------------------
> target-s390x/cpu.h | 10 ---
> target-s390x/op_helper.c | 1 +
> 4 files changed, 21 insertions(+), 145 deletions(-)
>
> diff --git a/Makefile.target b/Makefile.target
> index 5c22df8..be9c0e8 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -14,7 +14,7 @@ endif
>
> TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
> $(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
> -QEMU_CFLAGS+= -I.. -I$(TARGET_PATH) -DNEED_CPU_H
> +QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
>
> include $(SRC_PATH)/Makefile.objs
>
> @@ -37,8 +37,6 @@ ifndef CONFIG_HAIKU
> LIBS+=-lm
> endif
>
> -kvm.o kvm-all.o vhost.o vhost_net.o kvmclock.o:
> QEMU_CFLAGS+=$(KVM_CFLAGS)
> -
> config-target.h: config-target.h-timestamp
> config-target.h-timestamp: config-target.mak
>
> diff --git a/configure b/configure
> index d38b952..0e1dc46 100755
> --- a/configure
> +++ b/configure
> @@ -113,8 +113,7 @@ curl=""
> curses=""
> docs=""
> fdt=""
> -kvm=""
> -kvm_para=""
> +kvm="yes"
> nptl=""
Are you planning to add kvm support for all platforms which don't
support it today?
If not, kvm="yes" should be restricted to platforms with kvm support.
Otherwise, QEMU builds will fail very early:
ERROR: Host kernel lacks signalfd() support,
but KVM depends on it when the IO thread is disabled.
Of course, users of those non-kvm platforms can set --disable-kvm,
but I don't think that is the correct solution.
Even with kvm disabled, builds still fail for non-kvm systems:
In file included from /qemu/hw/kvmclock.c:21:
/qemu/linux-headers/linux/kvm_para.h:26:26: warning: asm/kvm_para.h:
No such file or directory
Cheers,
Stefan
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 03/12] Switch build system to accompanied kernel headers
@ 2011-06-22 20:51 ` Stefan Weil
0 siblings, 0 replies; 90+ messages in thread
From: Stefan Weil @ 2011-06-22 20:51 UTC (permalink / raw)
To: Jan Kiszka
Cc: Anthony Liguori, kvm, Marcelo Tosatti, Alexander Graf,
qemu-devel, Avi Kivity
Am 08.06.2011 16:10, schrieb Jan Kiszka:
> This helps reducing our build-time checks for feature support in the
> available Linux kernel headers. And it helps users that do not have
> sufficiently recent headers installed on their build machine.
>
> Consequently, the patch removes and build-time checks for kvm and vhost
> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
> supposed to be provided by QEMU only.
>
> s390 needs some extra love as it carries redefinitions from kernel
> headers.
>
> CC: Alexander Graf <agraf@suse.de>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
> Makefile.target | 4 +-
> configure | 151 ++++++----------------------------------------
> target-s390x/cpu.h | 10 ---
> target-s390x/op_helper.c | 1 +
> 4 files changed, 21 insertions(+), 145 deletions(-)
>
> diff --git a/Makefile.target b/Makefile.target
> index 5c22df8..be9c0e8 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -14,7 +14,7 @@ endif
>
> TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
> $(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
> -QEMU_CFLAGS+= -I.. -I$(TARGET_PATH) -DNEED_CPU_H
> +QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
>
> include $(SRC_PATH)/Makefile.objs
>
> @@ -37,8 +37,6 @@ ifndef CONFIG_HAIKU
> LIBS+=-lm
> endif
>
> -kvm.o kvm-all.o vhost.o vhost_net.o kvmclock.o:
> QEMU_CFLAGS+=$(KVM_CFLAGS)
> -
> config-target.h: config-target.h-timestamp
> config-target.h-timestamp: config-target.mak
>
> diff --git a/configure b/configure
> index d38b952..0e1dc46 100755
> --- a/configure
> +++ b/configure
> @@ -113,8 +113,7 @@ curl=""
> curses=""
> docs=""
> fdt=""
> -kvm=""
> -kvm_para=""
> +kvm="yes"
> nptl=""
Are you planning to add kvm support for all platforms which don't
support it today?
If not, kvm="yes" should be restricted to platforms with kvm support.
Otherwise, QEMU builds will fail very early:
ERROR: Host kernel lacks signalfd() support,
but KVM depends on it when the IO thread is disabled.
Of course, users of those non-kvm platforms can set --disable-kvm,
but I don't think that is the correct solution.
Even with kvm disabled, builds still fail for non-kvm systems:
In file included from /qemu/hw/kvmclock.c:21:
/qemu/linux-headers/linux/kvm_para.h:26:26: warning: asm/kvm_para.h:
No such file or directory
Cheers,
Stefan
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [PATCH 03/12] Switch build system to accompanied kernel headers
2011-06-22 20:51 ` [Qemu-devel] " Stefan Weil
@ 2011-06-22 21:37 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-22 21:37 UTC (permalink / raw)
To: Stefan Weil
Cc: Anthony Liguori, kvm, Marcelo Tosatti, Alexander Graf,
qemu-devel, Avi Kivity
[-- Attachment #1: Type: text/plain, Size: 3538 bytes --]
On 2011-06-22 22:51, Stefan Weil wrote:
> Am 08.06.2011 16:10, schrieb Jan Kiszka:
>> This helps reducing our build-time checks for feature support in the
>> available Linux kernel headers. And it helps users that do not have
>> sufficiently recent headers installed on their build machine.
>>
>> Consequently, the patch removes and build-time checks for kvm and vhost
>> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
>> supposed to be provided by QEMU only.
>>
>> s390 needs some extra love as it carries redefinitions from kernel
>> headers.
>>
>> CC: Alexander Graf <agraf@suse.de>
>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>> ---
>> Makefile.target | 4 +-
>> configure | 151 ++++++----------------------------------------
>> target-s390x/cpu.h | 10 ---
>> target-s390x/op_helper.c | 1 +
>> 4 files changed, 21 insertions(+), 145 deletions(-)
>>
>> diff --git a/Makefile.target b/Makefile.target
>> index 5c22df8..be9c0e8 100644
>> --- a/Makefile.target
>> +++ b/Makefile.target
>> @@ -14,7 +14,7 @@ endif
>>
>> TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
>> $(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
>> -QEMU_CFLAGS+= -I.. -I$(TARGET_PATH) -DNEED_CPU_H
>> +QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
>>
>> include $(SRC_PATH)/Makefile.objs
>>
>> @@ -37,8 +37,6 @@ ifndef CONFIG_HAIKU
>> LIBS+=-lm
>> endif
>>
>> -kvm.o kvm-all.o vhost.o vhost_net.o kvmclock.o:
>> QEMU_CFLAGS+=$(KVM_CFLAGS)
>> -
>> config-target.h: config-target.h-timestamp
>> config-target.h-timestamp: config-target.mak
>>
>> diff --git a/configure b/configure
>> index d38b952..0e1dc46 100755
>> --- a/configure
>> +++ b/configure
>> @@ -113,8 +113,7 @@ curl=""
>> curses=""
>> docs=""
>> fdt=""
>> -kvm=""
>> -kvm_para=""
>> +kvm="yes"
>> nptl=""
>
> Are you planning to add kvm support for all platforms which don't
> support it today?
That would mean replacing all their kernels with Linux. Will take a bit
longer.
I simply overshot with my cleanups:
diff --git a/configure b/configure
index 3286e33..e6847c4 100755
--- a/configure
+++ b/configure
@@ -113,7 +113,7 @@ curl=""
curses=""
docs=""
fdt=""
-kvm="yes"
+kvm=""
nptl=""
sdl=""
vnc="yes"
@@ -129,7 +129,7 @@ xen=""
xen_ctrl_version=""
linux_aio=""
attr=""
-vhost_net="yes"
+vhost_net=""
xfs=""
gprof="no"
@@ -457,6 +457,8 @@ Haiku)
linux="yes"
linux_user="yes"
usb="linux"
+ kvm="yes"
+ vhost_net="yes"
if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
audio_possible_drivers="$audio_possible_drivers fmod"
fi
Will post this as a patch tomorrow.
> If not, kvm="yes" should be restricted to platforms with kvm support.
>
> Otherwise, QEMU builds will fail very early:
>
> ERROR: Host kernel lacks signalfd() support,
> but KVM depends on it when the IO thread is disabled.
>
> Of course, users of those non-kvm platforms can set --disable-kvm,
> but I don't think that is the correct solution.
>
> Even with kvm disabled, builds still fail for non-kvm systems:
>
> In file included from /qemu/hw/kvmclock.c:21:
> /qemu/linux-headers/linux/kvm_para.h:26:26: warning: asm/kvm_para.h: No
> such file or directory
That indicates symlink emulation under Windows does not support
directories. Can you confirm this (check what
<builddir>/linux-headers/asm became)? Then we would have to link all
files in the arch header dir individually.
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 03/12] Switch build system to accompanied kernel headers
@ 2011-06-22 21:37 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-22 21:37 UTC (permalink / raw)
To: Stefan Weil
Cc: Anthony Liguori, kvm, Marcelo Tosatti, Alexander Graf,
qemu-devel, Avi Kivity
[-- Attachment #1: Type: text/plain, Size: 3538 bytes --]
On 2011-06-22 22:51, Stefan Weil wrote:
> Am 08.06.2011 16:10, schrieb Jan Kiszka:
>> This helps reducing our build-time checks for feature support in the
>> available Linux kernel headers. And it helps users that do not have
>> sufficiently recent headers installed on their build machine.
>>
>> Consequently, the patch removes and build-time checks for kvm and vhost
>> in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
>> supposed to be provided by QEMU only.
>>
>> s390 needs some extra love as it carries redefinitions from kernel
>> headers.
>>
>> CC: Alexander Graf <agraf@suse.de>
>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>> ---
>> Makefile.target | 4 +-
>> configure | 151 ++++++----------------------------------------
>> target-s390x/cpu.h | 10 ---
>> target-s390x/op_helper.c | 1 +
>> 4 files changed, 21 insertions(+), 145 deletions(-)
>>
>> diff --git a/Makefile.target b/Makefile.target
>> index 5c22df8..be9c0e8 100644
>> --- a/Makefile.target
>> +++ b/Makefile.target
>> @@ -14,7 +14,7 @@ endif
>>
>> TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
>> $(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
>> -QEMU_CFLAGS+= -I.. -I$(TARGET_PATH) -DNEED_CPU_H
>> +QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
>>
>> include $(SRC_PATH)/Makefile.objs
>>
>> @@ -37,8 +37,6 @@ ifndef CONFIG_HAIKU
>> LIBS+=-lm
>> endif
>>
>> -kvm.o kvm-all.o vhost.o vhost_net.o kvmclock.o:
>> QEMU_CFLAGS+=$(KVM_CFLAGS)
>> -
>> config-target.h: config-target.h-timestamp
>> config-target.h-timestamp: config-target.mak
>>
>> diff --git a/configure b/configure
>> index d38b952..0e1dc46 100755
>> --- a/configure
>> +++ b/configure
>> @@ -113,8 +113,7 @@ curl=""
>> curses=""
>> docs=""
>> fdt=""
>> -kvm=""
>> -kvm_para=""
>> +kvm="yes"
>> nptl=""
>
> Are you planning to add kvm support for all platforms which don't
> support it today?
That would mean replacing all their kernels with Linux. Will take a bit
longer.
I simply overshot with my cleanups:
diff --git a/configure b/configure
index 3286e33..e6847c4 100755
--- a/configure
+++ b/configure
@@ -113,7 +113,7 @@ curl=""
curses=""
docs=""
fdt=""
-kvm="yes"
+kvm=""
nptl=""
sdl=""
vnc="yes"
@@ -129,7 +129,7 @@ xen=""
xen_ctrl_version=""
linux_aio=""
attr=""
-vhost_net="yes"
+vhost_net=""
xfs=""
gprof="no"
@@ -457,6 +457,8 @@ Haiku)
linux="yes"
linux_user="yes"
usb="linux"
+ kvm="yes"
+ vhost_net="yes"
if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
audio_possible_drivers="$audio_possible_drivers fmod"
fi
Will post this as a patch tomorrow.
> If not, kvm="yes" should be restricted to platforms with kvm support.
>
> Otherwise, QEMU builds will fail very early:
>
> ERROR: Host kernel lacks signalfd() support,
> but KVM depends on it when the IO thread is disabled.
>
> Of course, users of those non-kvm platforms can set --disable-kvm,
> but I don't think that is the correct solution.
>
> Even with kvm disabled, builds still fail for non-kvm systems:
>
> In file included from /qemu/hw/kvmclock.c:21:
> /qemu/linux-headers/linux/kvm_para.h:26:26: warning: asm/kvm_para.h: No
> such file or directory
That indicates symlink emulation under Windows does not support
directories. Can you confirm this (check what
<builddir>/linux-headers/asm became)? Then we would have to link all
files in the arch header dir individually.
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [PATCH 03/12] Switch build system to accompanied kernel headers
2011-06-22 21:37 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-23 5:37 ` Stefan Weil
-1 siblings, 0 replies; 90+ messages in thread
From: Stefan Weil @ 2011-06-23 5:37 UTC (permalink / raw)
To: Jan Kiszka
Cc: Stefan Weil, Anthony Liguori, kvm, Marcelo Tosatti,
Alexander Graf, qemu-devel, Avi Kivity
Am 22.06.2011 23:37, schrieb Jan Kiszka:
> On 2011-06-22 22:51, Stefan Weil wrote:
>> If not, kvm="yes" should be restricted to platforms with kvm support.
>>
>> Otherwise, QEMU builds will fail very early:
>>
>> ERROR: Host kernel lacks signalfd() support,
>> but KVM depends on it when the IO thread is disabled.
>>
>> Of course, users of those non-kvm platforms can set --disable-kvm,
>> but I don't think that is the correct solution.
>>
>> Even with kvm disabled, builds still fail for non-kvm systems:
>>
>> In file included from /qemu/hw/kvmclock.c:21:
>> /qemu/linux-headers/linux/kvm_para.h:26:26: warning: asm/kvm_para.h: No
>> such file or directory
>
> That indicates symlink emulation under Windows does not support
> directories. Can you confirm this (check what
> <builddir>/linux-headers/asm became)? Then we would have to link all
> files in the arch header dir individually.
>
> Jan
Even when cross compiling for w32 (on a linux host), kvmclock.c
does not compile:
$ LANG=C make CFLAGS=-g
CC i386-softmmu/kvmclock.o
In file included from /home/stefan/src/qemu/savannah/qemu/hw/kvmclock.c:20:
/home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:10:25:
warning: linux/types.h: No such file or directory
/home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:12:25:
warning: linux/ioctl.h: No such file or directory
In file included from
/home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:13,
from /home/stefan/src/qemu/savannah/qemu/hw/kvmclock.c:20:
../linux-headers/asm/kvm.h:32: error: expected specifier-qualifier-list
before '__u32'
../linux-headers/asm/kvm.h:41: error: expected specifier-qualifier-list
before '__u8'
../linux-headers/asm/kvm.h:61: error: expected specifier-qualifier-list
before '__u64'
Is kvmclock.c really needed for non-kvm platforms? Or does it simply need
a obj-i386-$(CONFIG_KVM) in Makefile.target?
Stefan
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 03/12] Switch build system to accompanied kernel headers
@ 2011-06-23 5:37 ` Stefan Weil
0 siblings, 0 replies; 90+ messages in thread
From: Stefan Weil @ 2011-06-23 5:37 UTC (permalink / raw)
To: Jan Kiszka
Cc: Anthony Liguori, kvm, Marcelo Tosatti, Alexander Graf,
qemu-devel, Avi Kivity
Am 22.06.2011 23:37, schrieb Jan Kiszka:
> On 2011-06-22 22:51, Stefan Weil wrote:
>> If not, kvm="yes" should be restricted to platforms with kvm support.
>>
>> Otherwise, QEMU builds will fail very early:
>>
>> ERROR: Host kernel lacks signalfd() support,
>> but KVM depends on it when the IO thread is disabled.
>>
>> Of course, users of those non-kvm platforms can set --disable-kvm,
>> but I don't think that is the correct solution.
>>
>> Even with kvm disabled, builds still fail for non-kvm systems:
>>
>> In file included from /qemu/hw/kvmclock.c:21:
>> /qemu/linux-headers/linux/kvm_para.h:26:26: warning: asm/kvm_para.h: No
>> such file or directory
>
> That indicates symlink emulation under Windows does not support
> directories. Can you confirm this (check what
> <builddir>/linux-headers/asm became)? Then we would have to link all
> files in the arch header dir individually.
>
> Jan
Even when cross compiling for w32 (on a linux host), kvmclock.c
does not compile:
$ LANG=C make CFLAGS=-g
CC i386-softmmu/kvmclock.o
In file included from /home/stefan/src/qemu/savannah/qemu/hw/kvmclock.c:20:
/home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:10:25:
warning: linux/types.h: No such file or directory
/home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:12:25:
warning: linux/ioctl.h: No such file or directory
In file included from
/home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:13,
from /home/stefan/src/qemu/savannah/qemu/hw/kvmclock.c:20:
../linux-headers/asm/kvm.h:32: error: expected specifier-qualifier-list
before '__u32'
../linux-headers/asm/kvm.h:41: error: expected specifier-qualifier-list
before '__u8'
../linux-headers/asm/kvm.h:61: error: expected specifier-qualifier-list
before '__u64'
Is kvmclock.c really needed for non-kvm platforms? Or does it simply need
a obj-i386-$(CONFIG_KVM) in Makefile.target?
Stefan
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [PATCH 03/12] Switch build system to accompanied kernel headers
2011-06-23 5:37 ` [Qemu-devel] " Stefan Weil
@ 2011-06-23 7:18 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-23 7:18 UTC (permalink / raw)
To: Stefan Weil
Cc: Anthony Liguori, kvm, Marcelo Tosatti, Alexander Graf,
qemu-devel, Avi Kivity
[-- Attachment #1: Type: text/plain, Size: 2799 bytes --]
On 2011-06-23 07:37, Stefan Weil wrote:
> Am 22.06.2011 23:37, schrieb Jan Kiszka:
>> On 2011-06-22 22:51, Stefan Weil wrote:
>>> If not, kvm="yes" should be restricted to platforms with kvm support.
>>>
>>> Otherwise, QEMU builds will fail very early:
>>>
>>> ERROR: Host kernel lacks signalfd() support,
>>> but KVM depends on it when the IO thread is disabled.
>>>
>>> Of course, users of those non-kvm platforms can set --disable-kvm,
>>> but I don't think that is the correct solution.
>>>
>>> Even with kvm disabled, builds still fail for non-kvm systems:
>>>
>>> In file included from /qemu/hw/kvmclock.c:21:
>>> /qemu/linux-headers/linux/kvm_para.h:26:26: warning: asm/kvm_para.h: No
>>> such file or directory
>>
>> That indicates symlink emulation under Windows does not support
>> directories. Can you confirm this (check what
>> <builddir>/linux-headers/asm became)? Then we would have to link all
>> files in the arch header dir individually.
>>
>> Jan
>
> Even when cross compiling for w32 (on a linux host), kvmclock.c
> does not compile:
>
> $ LANG=C make CFLAGS=-g
> CC i386-softmmu/kvmclock.o
> In file included from /home/stefan/src/qemu/savannah/qemu/hw/kvmclock.c:20:
> /home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:10:25:
> warning: linux/types.h: No such file or directory
> /home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:12:25:
> warning: linux/ioctl.h: No such file or directory
> In file included from
> /home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:13,
> from /home/stefan/src/qemu/savannah/qemu/hw/kvmclock.c:20:
> ../linux-headers/asm/kvm.h:32: error: expected specifier-qualifier-list
> before '__u32'
> ../linux-headers/asm/kvm.h:41: error: expected specifier-qualifier-list
> before '__u8'
> ../linux-headers/asm/kvm.h:61: error: expected specifier-qualifier-list
> before '__u64'
>
> Is kvmclock.c really needed for non-kvm platforms? Or does it simply need
> a obj-i386-$(CONFIG_KVM) in Makefile.target?
It's not needed, specifically as we do not (yet) emulate the pv
interfaces of KVM. But changing the makefile won't suffice, we also need
to stub out kvmclock_create.
Right now I'm fighting to get a mingw build that far at all. The version
I have here (gcc 4.6 based) does not include liberity (but apparently
links fine without as well). Then there are tons of other errors and
warnings. Do you have some tree with recent fixes?
I would suggest you to set up a buildbot for the Windows platform. That
should help to get notifications about breakages a bit earlier. And that
may help to keep their number down (this broken window thing: once the
first few got damaged, no one will bother about smashing another one.
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 03/12] Switch build system to accompanied kernel headers
@ 2011-06-23 7:18 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-23 7:18 UTC (permalink / raw)
To: Stefan Weil
Cc: Anthony Liguori, kvm, Marcelo Tosatti, Alexander Graf,
qemu-devel, Avi Kivity
[-- Attachment #1: Type: text/plain, Size: 2799 bytes --]
On 2011-06-23 07:37, Stefan Weil wrote:
> Am 22.06.2011 23:37, schrieb Jan Kiszka:
>> On 2011-06-22 22:51, Stefan Weil wrote:
>>> If not, kvm="yes" should be restricted to platforms with kvm support.
>>>
>>> Otherwise, QEMU builds will fail very early:
>>>
>>> ERROR: Host kernel lacks signalfd() support,
>>> but KVM depends on it when the IO thread is disabled.
>>>
>>> Of course, users of those non-kvm platforms can set --disable-kvm,
>>> but I don't think that is the correct solution.
>>>
>>> Even with kvm disabled, builds still fail for non-kvm systems:
>>>
>>> In file included from /qemu/hw/kvmclock.c:21:
>>> /qemu/linux-headers/linux/kvm_para.h:26:26: warning: asm/kvm_para.h: No
>>> such file or directory
>>
>> That indicates symlink emulation under Windows does not support
>> directories. Can you confirm this (check what
>> <builddir>/linux-headers/asm became)? Then we would have to link all
>> files in the arch header dir individually.
>>
>> Jan
>
> Even when cross compiling for w32 (on a linux host), kvmclock.c
> does not compile:
>
> $ LANG=C make CFLAGS=-g
> CC i386-softmmu/kvmclock.o
> In file included from /home/stefan/src/qemu/savannah/qemu/hw/kvmclock.c:20:
> /home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:10:25:
> warning: linux/types.h: No such file or directory
> /home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:12:25:
> warning: linux/ioctl.h: No such file or directory
> In file included from
> /home/stefan/src/qemu/savannah/qemu/linux-headers/linux/kvm.h:13,
> from /home/stefan/src/qemu/savannah/qemu/hw/kvmclock.c:20:
> ../linux-headers/asm/kvm.h:32: error: expected specifier-qualifier-list
> before '__u32'
> ../linux-headers/asm/kvm.h:41: error: expected specifier-qualifier-list
> before '__u8'
> ../linux-headers/asm/kvm.h:61: error: expected specifier-qualifier-list
> before '__u64'
>
> Is kvmclock.c really needed for non-kvm platforms? Or does it simply need
> a obj-i386-$(CONFIG_KVM) in Makefile.target?
It's not needed, specifically as we do not (yet) emulate the pv
interfaces of KVM. But changing the makefile won't suffice, we also need
to stub out kvmclock_create.
Right now I'm fighting to get a mingw build that far at all. The version
I have here (gcc 4.6 based) does not include liberity (but apparently
links fine without as well). Then there are tons of other errors and
warnings. Do you have some tree with recent fixes?
I would suggest you to set up a buildbot for the Windows platform. That
should help to get notifications about breakages a bit earlier. And that
may help to keep their number down (this broken window thing: once the
first few got damaged, no one will bother about smashing another one.
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH] Fix fallouts from Linux header inclusion
2011-06-23 7:18 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-23 8:05 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-23 8:05 UTC (permalink / raw)
To: Stefan Weil, Anthony Liguori
Cc: kvm, Marcelo Tosatti, Alexander Graf, qemu-devel, Avi Kivity,
Stefan Hajnoczi
From: Jan Kiszka <jan.kiszka@siemens.com>
This is an all-in-one fix for the smaller and bigger mistakes of the
build system changes for accompanied Linux headers:
- only enable KVM and vhost on Linux hosts
- fix powerpc asm header symlink
- do not use Linux headers on non-Linux hosts
- fix kvmclock for !CONFIG_KVM
- fix s390 build on non-Linux hosts
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
Let me know if separate patches are preferred for this.
Makefile.target | 8 ++++++--
configure | 34 +++++++++++++++++++---------------
hw/kvmclock.h | 10 ++++++++++
target-s390x/op_helper.c | 6 +++++-
4 files changed, 40 insertions(+), 18 deletions(-)
diff --git a/Makefile.target b/Makefile.target
index 03d3646..d3971a6 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -14,7 +14,10 @@ endif
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
$(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
-QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
+ifdef CONFIG_LINUX
+QEMU_CFLAGS += -I../linux-headers
+endif
+QEMU_CFLAGS += -I.. -I$(TARGET_PATH) -DNEED_CPU_H
include $(SRC_PATH)/Makefile.objs
@@ -234,7 +237,8 @@ obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o piix_pci.o
obj-i386-y += vmport.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
-obj-i386-y += pc_piix.o kvmclock.o
+obj-i386-y += pc_piix.o
+obj-i386-$(CONFIG_KVM) += kvmclock.o
obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
# shared objects
diff --git a/configure b/configure
index 856b41e..e523976 100755
--- a/configure
+++ b/configure
@@ -113,7 +113,7 @@ curl=""
curses=""
docs=""
fdt=""
-kvm="yes"
+kvm=""
nptl=""
sdl=""
vnc="yes"
@@ -129,7 +129,7 @@ xen=""
xen_ctrl_version=""
linux_aio=""
attr=""
-vhost_net="yes"
+vhost_net=""
xfs=""
gprof="no"
@@ -457,6 +457,8 @@ Haiku)
linux="yes"
linux_user="yes"
usb="linux"
+ kvm="yes"
+ vhost_net="yes"
if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
audio_possible_drivers="$audio_possible_drivers fmod"
fi
@@ -3444,19 +3446,21 @@ if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
fi
# use included Linux headers
-includes="-I\$(SRC_PATH)/linux-headers $includes"
-mkdir -p linux-headers
-case "$cpu" in
-i386|x86_64)
- symlink $source_path/linux-headers/asm-x86 linux-headers/asm
- ;;
-ppcemb|ppc|ppc64)
- symlink $source_path/linux-headers/asm-x86 linux-headers/asm
- ;;
-s390x)
- symlink $source_path/linux-headers/asm-s390 linux-headers/asm
- ;;
-esac
+if test "$linux" = "yes" ; then
+ includes="-I\$(SRC_PATH)/linux-headers $includes"
+ mkdir -p linux-headers
+ case "$cpu" in
+ i386|x86_64)
+ symlink $source_path/linux-headers/asm-x86 linux-headers/asm
+ ;;
+ ppcemb|ppc|ppc64)
+ symlink $source_path/linux-headers/asm-powerpc linux-headers/asm
+ ;;
+ s390x)
+ symlink $source_path/linux-headers/asm-s390 linux-headers/asm
+ ;;
+ esac
+fi
echo "LDFLAGS+=$ldflags" >> $config_target_mak
echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
diff --git a/hw/kvmclock.h b/hw/kvmclock.h
index 7a83cbe..252ea13 100644
--- a/hw/kvmclock.h
+++ b/hw/kvmclock.h
@@ -11,4 +11,14 @@
*
*/
+#ifdef CONFIG_KVM
+
void kvmclock_create(void);
+
+#else /* CONFIG_KVM */
+
+static inline void kvmclock_create(void)
+{
+}
+
+#endif /* !CONFIG_KVM */
diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
index 9429698..6a3c1f6 100644
--- a/target-s390x/op_helper.c
+++ b/target-s390x/op_helper.c
@@ -23,8 +23,10 @@
#include "helpers.h"
#include <string.h>
#include "kvm.h"
-#include <linux/kvm.h>
#include "qemu-timer.h"
+#ifdef CONFIG_KVM
+#include <linux/kvm.h>
+#endif
/*****************************************************************************/
/* Softmmu support */
@@ -2332,7 +2334,9 @@ static void program_interrupt(CPUState *env, uint32_t code, int ilc)
qemu_log("program interrupt at %#" PRIx64 "\n", env->psw.addr);
if (kvm_enabled()) {
+#ifdef CONFIG_KVM
kvm_s390_interrupt(env, KVM_S390_PROGRAM_INT, code);
+#endif
} else {
env->int_pgm_code = code;
env->int_pgm_ilc = ilc;
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH] Fix fallouts from Linux header inclusion
@ 2011-06-23 8:05 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-23 8:05 UTC (permalink / raw)
To: Stefan Weil, Anthony Liguori
Cc: Stefan Hajnoczi, kvm, Marcelo Tosatti, Alexander Graf,
qemu-devel, Avi Kivity
From: Jan Kiszka <jan.kiszka@siemens.com>
This is an all-in-one fix for the smaller and bigger mistakes of the
build system changes for accompanied Linux headers:
- only enable KVM and vhost on Linux hosts
- fix powerpc asm header symlink
- do not use Linux headers on non-Linux hosts
- fix kvmclock for !CONFIG_KVM
- fix s390 build on non-Linux hosts
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
Let me know if separate patches are preferred for this.
Makefile.target | 8 ++++++--
configure | 34 +++++++++++++++++++---------------
hw/kvmclock.h | 10 ++++++++++
target-s390x/op_helper.c | 6 +++++-
4 files changed, 40 insertions(+), 18 deletions(-)
diff --git a/Makefile.target b/Makefile.target
index 03d3646..d3971a6 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -14,7 +14,10 @@ endif
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
$(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
-QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
+ifdef CONFIG_LINUX
+QEMU_CFLAGS += -I../linux-headers
+endif
+QEMU_CFLAGS += -I.. -I$(TARGET_PATH) -DNEED_CPU_H
include $(SRC_PATH)/Makefile.objs
@@ -234,7 +237,8 @@ obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o piix_pci.o
obj-i386-y += vmport.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
-obj-i386-y += pc_piix.o kvmclock.o
+obj-i386-y += pc_piix.o
+obj-i386-$(CONFIG_KVM) += kvmclock.o
obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
# shared objects
diff --git a/configure b/configure
index 856b41e..e523976 100755
--- a/configure
+++ b/configure
@@ -113,7 +113,7 @@ curl=""
curses=""
docs=""
fdt=""
-kvm="yes"
+kvm=""
nptl=""
sdl=""
vnc="yes"
@@ -129,7 +129,7 @@ xen=""
xen_ctrl_version=""
linux_aio=""
attr=""
-vhost_net="yes"
+vhost_net=""
xfs=""
gprof="no"
@@ -457,6 +457,8 @@ Haiku)
linux="yes"
linux_user="yes"
usb="linux"
+ kvm="yes"
+ vhost_net="yes"
if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
audio_possible_drivers="$audio_possible_drivers fmod"
fi
@@ -3444,19 +3446,21 @@ if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
fi
# use included Linux headers
-includes="-I\$(SRC_PATH)/linux-headers $includes"
-mkdir -p linux-headers
-case "$cpu" in
-i386|x86_64)
- symlink $source_path/linux-headers/asm-x86 linux-headers/asm
- ;;
-ppcemb|ppc|ppc64)
- symlink $source_path/linux-headers/asm-x86 linux-headers/asm
- ;;
-s390x)
- symlink $source_path/linux-headers/asm-s390 linux-headers/asm
- ;;
-esac
+if test "$linux" = "yes" ; then
+ includes="-I\$(SRC_PATH)/linux-headers $includes"
+ mkdir -p linux-headers
+ case "$cpu" in
+ i386|x86_64)
+ symlink $source_path/linux-headers/asm-x86 linux-headers/asm
+ ;;
+ ppcemb|ppc|ppc64)
+ symlink $source_path/linux-headers/asm-powerpc linux-headers/asm
+ ;;
+ s390x)
+ symlink $source_path/linux-headers/asm-s390 linux-headers/asm
+ ;;
+ esac
+fi
echo "LDFLAGS+=$ldflags" >> $config_target_mak
echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
diff --git a/hw/kvmclock.h b/hw/kvmclock.h
index 7a83cbe..252ea13 100644
--- a/hw/kvmclock.h
+++ b/hw/kvmclock.h
@@ -11,4 +11,14 @@
*
*/
+#ifdef CONFIG_KVM
+
void kvmclock_create(void);
+
+#else /* CONFIG_KVM */
+
+static inline void kvmclock_create(void)
+{
+}
+
+#endif /* !CONFIG_KVM */
diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
index 9429698..6a3c1f6 100644
--- a/target-s390x/op_helper.c
+++ b/target-s390x/op_helper.c
@@ -23,8 +23,10 @@
#include "helpers.h"
#include <string.h>
#include "kvm.h"
-#include <linux/kvm.h>
#include "qemu-timer.h"
+#ifdef CONFIG_KVM
+#include <linux/kvm.h>
+#endif
/*****************************************************************************/
/* Softmmu support */
@@ -2332,7 +2334,9 @@ static void program_interrupt(CPUState *env, uint32_t code, int ilc)
qemu_log("program interrupt at %#" PRIx64 "\n", env->psw.addr);
if (kvm_enabled()) {
+#ifdef CONFIG_KVM
kvm_s390_interrupt(env, KVM_S390_PROGRAM_INT, code);
+#endif
} else {
env->int_pgm_code = code;
env->int_pgm_ilc = ilc;
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH] Fix fallouts from Linux header inclusion
2011-06-23 8:05 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-23 10:59 ` Andreas Färber
-1 siblings, 0 replies; 90+ messages in thread
From: Andreas Färber @ 2011-06-23 10:59 UTC (permalink / raw)
To: Jan Kiszka
Cc: Stefan Weil, Anthony Liguori, Stefan Hajnoczi, kvm,
Marcelo Tosatti, Alexander Graf, qemu-devel, Avi Kivity
Am 23.06.2011 um 10:05 schrieb Jan Kiszka:
> From: Jan Kiszka <jan.kiszka@siemens.com>
>
> This is an all-in-one fix for the smaller and bigger mistakes of the
> build system changes for accompanied Linux headers:
> - only enable KVM and vhost on Linux hosts
> - fix powerpc asm header symlink
> - do not use Linux headers on non-Linux hosts
> - fix kvmclock for !CONFIG_KVM
> - fix s390 build on non-Linux hosts
>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Builds okay on Darwin/ppc64.
Andreas
> ---
>
> Let me know if separate patches are preferred for this.
>
> Makefile.target | 8 ++++++--
> configure | 34 +++++++++++++++++++---------------
> hw/kvmclock.h | 10 ++++++++++
> target-s390x/op_helper.c | 6 +++++-
> 4 files changed, 40 insertions(+), 18 deletions(-)
>
> diff --git a/Makefile.target b/Makefile.target
> index 03d3646..d3971a6 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -14,7 +14,10 @@ endif
>
> TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
> $(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
> -QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
> +ifdef CONFIG_LINUX
> +QEMU_CFLAGS += -I../linux-headers
> +endif
> +QEMU_CFLAGS += -I.. -I$(TARGET_PATH) -DNEED_CPU_H
>
> include $(SRC_PATH)/Makefile.objs
>
> @@ -234,7 +237,8 @@ obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o
> piix_pci.o
> obj-i386-y += vmport.o
> obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
> obj-i386-y += debugcon.o multiboot.o
> -obj-i386-y += pc_piix.o kvmclock.o
> +obj-i386-y += pc_piix.o
> +obj-i386-$(CONFIG_KVM) += kvmclock.o
> obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
>
> # shared objects
> diff --git a/configure b/configure
> index 856b41e..e523976 100755
> --- a/configure
> +++ b/configure
> @@ -113,7 +113,7 @@ curl=""
> curses=""
> docs=""
> fdt=""
> -kvm="yes"
> +kvm=""
> nptl=""
> sdl=""
> vnc="yes"
> @@ -129,7 +129,7 @@ xen=""
> xen_ctrl_version=""
> linux_aio=""
> attr=""
> -vhost_net="yes"
> +vhost_net=""
> xfs=""
>
> gprof="no"
> @@ -457,6 +457,8 @@ Haiku)
> linux="yes"
> linux_user="yes"
> usb="linux"
> + kvm="yes"
> + vhost_net="yes"
> if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
> audio_possible_drivers="$audio_possible_drivers fmod"
> fi
> @@ -3444,19 +3446,21 @@ if test "$target_linux_user" = "yes" -o
> "$target_bsd_user" = "yes" ; then
> fi
>
> # use included Linux headers
> -includes="-I\$(SRC_PATH)/linux-headers $includes"
> -mkdir -p linux-headers
> -case "$cpu" in
> -i386|x86_64)
> - symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> - ;;
> -ppcemb|ppc|ppc64)
> - symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> - ;;
> -s390x)
> - symlink $source_path/linux-headers/asm-s390 linux-headers/asm
> - ;;
> -esac
> +if test "$linux" = "yes" ; then
> + includes="-I\$(SRC_PATH)/linux-headers $includes"
> + mkdir -p linux-headers
> + case "$cpu" in
> + i386|x86_64)
> + symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> + ;;
> + ppcemb|ppc|ppc64)
> + symlink $source_path/linux-headers/asm-powerpc linux-headers/asm
> + ;;
> + s390x)
> + symlink $source_path/linux-headers/asm-s390 linux-headers/asm
> + ;;
> + esac
> +fi
>
> echo "LDFLAGS+=$ldflags" >> $config_target_mak
> echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
> diff --git a/hw/kvmclock.h b/hw/kvmclock.h
> index 7a83cbe..252ea13 100644
> --- a/hw/kvmclock.h
> +++ b/hw/kvmclock.h
> @@ -11,4 +11,14 @@
> *
> */
>
> +#ifdef CONFIG_KVM
> +
> void kvmclock_create(void);
> +
> +#else /* CONFIG_KVM */
> +
> +static inline void kvmclock_create(void)
> +{
> +}
> +
> +#endif /* !CONFIG_KVM */
> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
> index 9429698..6a3c1f6 100644
> --- a/target-s390x/op_helper.c
> +++ b/target-s390x/op_helper.c
> @@ -23,8 +23,10 @@
> #include "helpers.h"
> #include <string.h>
> #include "kvm.h"
> -#include <linux/kvm.h>
> #include "qemu-timer.h"
> +#ifdef CONFIG_KVM
> +#include <linux/kvm.h>
> +#endif
>
> /
> *****************************************************************************/
> /* Softmmu support */
> @@ -2332,7 +2334,9 @@ static void program_interrupt(CPUState *env,
> uint32_t code, int ilc)
> qemu_log("program interrupt at %#" PRIx64 "\n", env->psw.addr);
>
> if (kvm_enabled()) {
> +#ifdef CONFIG_KVM
> kvm_s390_interrupt(env, KVM_S390_PROGRAM_INT, code);
> +#endif
> } else {
> env->int_pgm_code = code;
> env->int_pgm_ilc = ilc;
>
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH] Fix fallouts from Linux header inclusion
@ 2011-06-23 10:59 ` Andreas Färber
0 siblings, 0 replies; 90+ messages in thread
From: Andreas Färber @ 2011-06-23 10:59 UTC (permalink / raw)
To: Jan Kiszka
Cc: Anthony Liguori, Stefan Hajnoczi, kvm, Marcelo Tosatti,
Alexander Graf, qemu-devel, Avi Kivity
Am 23.06.2011 um 10:05 schrieb Jan Kiszka:
> From: Jan Kiszka <jan.kiszka@siemens.com>
>
> This is an all-in-one fix for the smaller and bigger mistakes of the
> build system changes for accompanied Linux headers:
> - only enable KVM and vhost on Linux hosts
> - fix powerpc asm header symlink
> - do not use Linux headers on non-Linux hosts
> - fix kvmclock for !CONFIG_KVM
> - fix s390 build on non-Linux hosts
>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Builds okay on Darwin/ppc64.
Andreas
> ---
>
> Let me know if separate patches are preferred for this.
>
> Makefile.target | 8 ++++++--
> configure | 34 +++++++++++++++++++---------------
> hw/kvmclock.h | 10 ++++++++++
> target-s390x/op_helper.c | 6 +++++-
> 4 files changed, 40 insertions(+), 18 deletions(-)
>
> diff --git a/Makefile.target b/Makefile.target
> index 03d3646..d3971a6 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -14,7 +14,10 @@ endif
>
> TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
> $(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
> -QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
> +ifdef CONFIG_LINUX
> +QEMU_CFLAGS += -I../linux-headers
> +endif
> +QEMU_CFLAGS += -I.. -I$(TARGET_PATH) -DNEED_CPU_H
>
> include $(SRC_PATH)/Makefile.objs
>
> @@ -234,7 +237,8 @@ obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o
> piix_pci.o
> obj-i386-y += vmport.o
> obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
> obj-i386-y += debugcon.o multiboot.o
> -obj-i386-y += pc_piix.o kvmclock.o
> +obj-i386-y += pc_piix.o
> +obj-i386-$(CONFIG_KVM) += kvmclock.o
> obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
>
> # shared objects
> diff --git a/configure b/configure
> index 856b41e..e523976 100755
> --- a/configure
> +++ b/configure
> @@ -113,7 +113,7 @@ curl=""
> curses=""
> docs=""
> fdt=""
> -kvm="yes"
> +kvm=""
> nptl=""
> sdl=""
> vnc="yes"
> @@ -129,7 +129,7 @@ xen=""
> xen_ctrl_version=""
> linux_aio=""
> attr=""
> -vhost_net="yes"
> +vhost_net=""
> xfs=""
>
> gprof="no"
> @@ -457,6 +457,8 @@ Haiku)
> linux="yes"
> linux_user="yes"
> usb="linux"
> + kvm="yes"
> + vhost_net="yes"
> if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
> audio_possible_drivers="$audio_possible_drivers fmod"
> fi
> @@ -3444,19 +3446,21 @@ if test "$target_linux_user" = "yes" -o
> "$target_bsd_user" = "yes" ; then
> fi
>
> # use included Linux headers
> -includes="-I\$(SRC_PATH)/linux-headers $includes"
> -mkdir -p linux-headers
> -case "$cpu" in
> -i386|x86_64)
> - symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> - ;;
> -ppcemb|ppc|ppc64)
> - symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> - ;;
> -s390x)
> - symlink $source_path/linux-headers/asm-s390 linux-headers/asm
> - ;;
> -esac
> +if test "$linux" = "yes" ; then
> + includes="-I\$(SRC_PATH)/linux-headers $includes"
> + mkdir -p linux-headers
> + case "$cpu" in
> + i386|x86_64)
> + symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> + ;;
> + ppcemb|ppc|ppc64)
> + symlink $source_path/linux-headers/asm-powerpc linux-headers/asm
> + ;;
> + s390x)
> + symlink $source_path/linux-headers/asm-s390 linux-headers/asm
> + ;;
> + esac
> +fi
>
> echo "LDFLAGS+=$ldflags" >> $config_target_mak
> echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
> diff --git a/hw/kvmclock.h b/hw/kvmclock.h
> index 7a83cbe..252ea13 100644
> --- a/hw/kvmclock.h
> +++ b/hw/kvmclock.h
> @@ -11,4 +11,14 @@
> *
> */
>
> +#ifdef CONFIG_KVM
> +
> void kvmclock_create(void);
> +
> +#else /* CONFIG_KVM */
> +
> +static inline void kvmclock_create(void)
> +{
> +}
> +
> +#endif /* !CONFIG_KVM */
> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
> index 9429698..6a3c1f6 100644
> --- a/target-s390x/op_helper.c
> +++ b/target-s390x/op_helper.c
> @@ -23,8 +23,10 @@
> #include "helpers.h"
> #include <string.h>
> #include "kvm.h"
> -#include <linux/kvm.h>
> #include "qemu-timer.h"
> +#ifdef CONFIG_KVM
> +#include <linux/kvm.h>
> +#endif
>
> /
> *****************************************************************************/
> /* Softmmu support */
> @@ -2332,7 +2334,9 @@ static void program_interrupt(CPUState *env,
> uint32_t code, int ilc)
> qemu_log("program interrupt at %#" PRIx64 "\n", env->psw.addr);
>
> if (kvm_enabled()) {
> +#ifdef CONFIG_KVM
> kvm_s390_interrupt(env, KVM_S390_PROGRAM_INT, code);
> +#endif
> } else {
> env->int_pgm_code = code;
> env->int_pgm_ilc = ilc;
>
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [PATCH] Fix fallouts from Linux header inclusion
2011-06-23 8:05 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-23 15:14 ` Stefan Weil
-1 siblings, 0 replies; 90+ messages in thread
From: Stefan Weil @ 2011-06-23 15:14 UTC (permalink / raw)
To: Jan Kiszka
Cc: Anthony Liguori, kvm, Marcelo Tosatti, Alexander Graf,
qemu-devel, Avi Kivity, Stefan Hajnoczi
Am 23.06.2011 10:05, schrieb Jan Kiszka:
> From: Jan Kiszka <jan.kiszka@siemens.com>
>
> This is an all-in-one fix for the smaller and bigger mistakes of the
> build system changes for accompanied Linux headers:
> - only enable KVM and vhost on Linux hosts
> - fix powerpc asm header symlink
> - do not use Linux headers on non-Linux hosts
> - fix kvmclock for !CONFIG_KVM
> - fix s390 build on non-Linux hosts
>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>
Tested-by: Stefan Weil <weil@mail.berlios.de>
The patch fixes the kvm related build errors for mingw32.
Stefan
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH] Fix fallouts from Linux header inclusion
@ 2011-06-23 15:14 ` Stefan Weil
0 siblings, 0 replies; 90+ messages in thread
From: Stefan Weil @ 2011-06-23 15:14 UTC (permalink / raw)
To: Jan Kiszka
Cc: Anthony Liguori, Stefan Hajnoczi, kvm, Marcelo Tosatti,
Alexander Graf, qemu-devel, Avi Kivity
Am 23.06.2011 10:05, schrieb Jan Kiszka:
> From: Jan Kiszka <jan.kiszka@siemens.com>
>
> This is an all-in-one fix for the smaller and bigger mistakes of the
> build system changes for accompanied Linux headers:
> - only enable KVM and vhost on Linux hosts
> - fix powerpc asm header symlink
> - do not use Linux headers on non-Linux hosts
> - fix kvmclock for !CONFIG_KVM
> - fix s390 build on non-Linux hosts
>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>
Tested-by: Stefan Weil <weil@mail.berlios.de>
The patch fixes the kvm related build errors for mingw32.
Stefan
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH] Fix fallouts from Linux header inclusion
2011-06-23 8:05 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-26 18:01 ` Blue Swirl
-1 siblings, 0 replies; 90+ messages in thread
From: Blue Swirl @ 2011-06-26 18:01 UTC (permalink / raw)
To: Jan Kiszka
Cc: Stefan Weil, Anthony Liguori, Stefan Hajnoczi, kvm,
Marcelo Tosatti, Alexander Graf, qemu-devel, Avi Kivity
Thanks, applied.
On Thu, Jun 23, 2011 at 11:05 AM, Jan Kiszka <jan.kiszka@web.de> wrote:
> From: Jan Kiszka <jan.kiszka@siemens.com>
>
> This is an all-in-one fix for the smaller and bigger mistakes of the
> build system changes for accompanied Linux headers:
> - only enable KVM and vhost on Linux hosts
> - fix powerpc asm header symlink
> - do not use Linux headers on non-Linux hosts
> - fix kvmclock for !CONFIG_KVM
> - fix s390 build on non-Linux hosts
>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
>
> Let me know if separate patches are preferred for this.
>
> Makefile.target | 8 ++++++--
> configure | 34 +++++++++++++++++++---------------
> hw/kvmclock.h | 10 ++++++++++
> target-s390x/op_helper.c | 6 +++++-
> 4 files changed, 40 insertions(+), 18 deletions(-)
>
> diff --git a/Makefile.target b/Makefile.target
> index 03d3646..d3971a6 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -14,7 +14,10 @@ endif
>
> TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
> $(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
> -QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
> +ifdef CONFIG_LINUX
> +QEMU_CFLAGS += -I../linux-headers
> +endif
> +QEMU_CFLAGS += -I.. -I$(TARGET_PATH) -DNEED_CPU_H
>
> include $(SRC_PATH)/Makefile.objs
>
> @@ -234,7 +237,8 @@ obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o piix_pci.o
> obj-i386-y += vmport.o
> obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
> obj-i386-y += debugcon.o multiboot.o
> -obj-i386-y += pc_piix.o kvmclock.o
> +obj-i386-y += pc_piix.o
> +obj-i386-$(CONFIG_KVM) += kvmclock.o
> obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
>
> # shared objects
> diff --git a/configure b/configure
> index 856b41e..e523976 100755
> --- a/configure
> +++ b/configure
> @@ -113,7 +113,7 @@ curl=""
> curses=""
> docs=""
> fdt=""
> -kvm="yes"
> +kvm=""
> nptl=""
> sdl=""
> vnc="yes"
> @@ -129,7 +129,7 @@ xen=""
> xen_ctrl_version=""
> linux_aio=""
> attr=""
> -vhost_net="yes"
> +vhost_net=""
> xfs=""
>
> gprof="no"
> @@ -457,6 +457,8 @@ Haiku)
> linux="yes"
> linux_user="yes"
> usb="linux"
> + kvm="yes"
> + vhost_net="yes"
> if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
> audio_possible_drivers="$audio_possible_drivers fmod"
> fi
> @@ -3444,19 +3446,21 @@ if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
> fi
>
> # use included Linux headers
> -includes="-I\$(SRC_PATH)/linux-headers $includes"
> -mkdir -p linux-headers
> -case "$cpu" in
> -i386|x86_64)
> - symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> - ;;
> -ppcemb|ppc|ppc64)
> - symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> - ;;
> -s390x)
> - symlink $source_path/linux-headers/asm-s390 linux-headers/asm
> - ;;
> -esac
> +if test "$linux" = "yes" ; then
> + includes="-I\$(SRC_PATH)/linux-headers $includes"
> + mkdir -p linux-headers
> + case "$cpu" in
> + i386|x86_64)
> + symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> + ;;
> + ppcemb|ppc|ppc64)
> + symlink $source_path/linux-headers/asm-powerpc linux-headers/asm
> + ;;
> + s390x)
> + symlink $source_path/linux-headers/asm-s390 linux-headers/asm
> + ;;
> + esac
> +fi
>
> echo "LDFLAGS+=$ldflags" >> $config_target_mak
> echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
> diff --git a/hw/kvmclock.h b/hw/kvmclock.h
> index 7a83cbe..252ea13 100644
> --- a/hw/kvmclock.h
> +++ b/hw/kvmclock.h
> @@ -11,4 +11,14 @@
> *
> */
>
> +#ifdef CONFIG_KVM
> +
> void kvmclock_create(void);
> +
> +#else /* CONFIG_KVM */
> +
> +static inline void kvmclock_create(void)
> +{
> +}
> +
> +#endif /* !CONFIG_KVM */
> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
> index 9429698..6a3c1f6 100644
> --- a/target-s390x/op_helper.c
> +++ b/target-s390x/op_helper.c
> @@ -23,8 +23,10 @@
> #include "helpers.h"
> #include <string.h>
> #include "kvm.h"
> -#include <linux/kvm.h>
> #include "qemu-timer.h"
> +#ifdef CONFIG_KVM
> +#include <linux/kvm.h>
> +#endif
>
> /*****************************************************************************/
> /* Softmmu support */
> @@ -2332,7 +2334,9 @@ static void program_interrupt(CPUState *env, uint32_t code, int ilc)
> qemu_log("program interrupt at %#" PRIx64 "\n", env->psw.addr);
>
> if (kvm_enabled()) {
> +#ifdef CONFIG_KVM
> kvm_s390_interrupt(env, KVM_S390_PROGRAM_INT, code);
> +#endif
> } else {
> env->int_pgm_code = code;
> env->int_pgm_ilc = ilc;
>
>
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH] Fix fallouts from Linux header inclusion
@ 2011-06-26 18:01 ` Blue Swirl
0 siblings, 0 replies; 90+ messages in thread
From: Blue Swirl @ 2011-06-26 18:01 UTC (permalink / raw)
To: Jan Kiszka
Cc: Anthony Liguori, Stefan Hajnoczi, kvm, Marcelo Tosatti,
Alexander Graf, qemu-devel, Avi Kivity
Thanks, applied.
On Thu, Jun 23, 2011 at 11:05 AM, Jan Kiszka <jan.kiszka@web.de> wrote:
> From: Jan Kiszka <jan.kiszka@siemens.com>
>
> This is an all-in-one fix for the smaller and bigger mistakes of the
> build system changes for accompanied Linux headers:
> - only enable KVM and vhost on Linux hosts
> - fix powerpc asm header symlink
> - do not use Linux headers on non-Linux hosts
> - fix kvmclock for !CONFIG_KVM
> - fix s390 build on non-Linux hosts
>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
>
> Let me know if separate patches are preferred for this.
>
> Makefile.target | 8 ++++++--
> configure | 34 +++++++++++++++++++---------------
> hw/kvmclock.h | 10 ++++++++++
> target-s390x/op_helper.c | 6 +++++-
> 4 files changed, 40 insertions(+), 18 deletions(-)
>
> diff --git a/Makefile.target b/Makefile.target
> index 03d3646..d3971a6 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -14,7 +14,10 @@ endif
>
> TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
> $(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
> -QEMU_CFLAGS+= -I.. -I../linux-headers -I$(TARGET_PATH) -DNEED_CPU_H
> +ifdef CONFIG_LINUX
> +QEMU_CFLAGS += -I../linux-headers
> +endif
> +QEMU_CFLAGS += -I.. -I$(TARGET_PATH) -DNEED_CPU_H
>
> include $(SRC_PATH)/Makefile.objs
>
> @@ -234,7 +237,8 @@ obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o piix_pci.o
> obj-i386-y += vmport.o
> obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
> obj-i386-y += debugcon.o multiboot.o
> -obj-i386-y += pc_piix.o kvmclock.o
> +obj-i386-y += pc_piix.o
> +obj-i386-$(CONFIG_KVM) += kvmclock.o
> obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
>
> # shared objects
> diff --git a/configure b/configure
> index 856b41e..e523976 100755
> --- a/configure
> +++ b/configure
> @@ -113,7 +113,7 @@ curl=""
> curses=""
> docs=""
> fdt=""
> -kvm="yes"
> +kvm=""
> nptl=""
> sdl=""
> vnc="yes"
> @@ -129,7 +129,7 @@ xen=""
> xen_ctrl_version=""
> linux_aio=""
> attr=""
> -vhost_net="yes"
> +vhost_net=""
> xfs=""
>
> gprof="no"
> @@ -457,6 +457,8 @@ Haiku)
> linux="yes"
> linux_user="yes"
> usb="linux"
> + kvm="yes"
> + vhost_net="yes"
> if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
> audio_possible_drivers="$audio_possible_drivers fmod"
> fi
> @@ -3444,19 +3446,21 @@ if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
> fi
>
> # use included Linux headers
> -includes="-I\$(SRC_PATH)/linux-headers $includes"
> -mkdir -p linux-headers
> -case "$cpu" in
> -i386|x86_64)
> - symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> - ;;
> -ppcemb|ppc|ppc64)
> - symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> - ;;
> -s390x)
> - symlink $source_path/linux-headers/asm-s390 linux-headers/asm
> - ;;
> -esac
> +if test "$linux" = "yes" ; then
> + includes="-I\$(SRC_PATH)/linux-headers $includes"
> + mkdir -p linux-headers
> + case "$cpu" in
> + i386|x86_64)
> + symlink $source_path/linux-headers/asm-x86 linux-headers/asm
> + ;;
> + ppcemb|ppc|ppc64)
> + symlink $source_path/linux-headers/asm-powerpc linux-headers/asm
> + ;;
> + s390x)
> + symlink $source_path/linux-headers/asm-s390 linux-headers/asm
> + ;;
> + esac
> +fi
>
> echo "LDFLAGS+=$ldflags" >> $config_target_mak
> echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
> diff --git a/hw/kvmclock.h b/hw/kvmclock.h
> index 7a83cbe..252ea13 100644
> --- a/hw/kvmclock.h
> +++ b/hw/kvmclock.h
> @@ -11,4 +11,14 @@
> *
> */
>
> +#ifdef CONFIG_KVM
> +
> void kvmclock_create(void);
> +
> +#else /* CONFIG_KVM */
> +
> +static inline void kvmclock_create(void)
> +{
> +}
> +
> +#endif /* !CONFIG_KVM */
> diff --git a/target-s390x/op_helper.c b/target-s390x/op_helper.c
> index 9429698..6a3c1f6 100644
> --- a/target-s390x/op_helper.c
> +++ b/target-s390x/op_helper.c
> @@ -23,8 +23,10 @@
> #include "helpers.h"
> #include <string.h>
> #include "kvm.h"
> -#include <linux/kvm.h>
> #include "qemu-timer.h"
> +#ifdef CONFIG_KVM
> +#include <linux/kvm.h>
> +#endif
>
> /*****************************************************************************/
> /* Softmmu support */
> @@ -2332,7 +2334,9 @@ static void program_interrupt(CPUState *env, uint32_t code, int ilc)
> qemu_log("program interrupt at %#" PRIx64 "\n", env->psw.addr);
>
> if (kvm_enabled()) {
> +#ifdef CONFIG_KVM
> kvm_s390_interrupt(env, KVM_S390_PROGRAM_INT, code);
> +#endif
> } else {
> env->int_pgm_code = code;
> env->int_pgm_ilc = ilc;
>
>
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 04/12] kvm: Drop CONFIG_KVM_PARA
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:10 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel
The kvm_para.h header is now always available.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
configure | 1 -
hw/kvmclock.c | 9 ---------
target-i386/kvm.c | 26 +-------------------------
3 files changed, 1 insertions(+), 35 deletions(-)
diff --git a/configure b/configure
index 0e1dc46..ed54db9 100755
--- a/configure
+++ b/configure
@@ -3218,7 +3218,6 @@ case "$target_arch2" in
\( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \
\( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then
echo "CONFIG_KVM=y" >> $config_target_mak
- echo "CONFIG_KVM_PARA=y" >> $config_target_mak
if test $vhost_net = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
fi
diff --git a/hw/kvmclock.c b/hw/kvmclock.c
index 004c4ad..692ad18 100644
--- a/hw/kvmclock.c
+++ b/hw/kvmclock.c
@@ -17,8 +17,6 @@
#include "kvm.h"
#include "kvmclock.h"
-#if defined(CONFIG_KVM_PARA) && defined(KVM_CAP_ADJUST_CLOCK)
-
#include <linux/kvm.h>
#include <linux/kvm_para.h>
@@ -120,10 +118,3 @@ static void kvmclock_register_device(void)
}
device_init(kvmclock_register_device);
-
-#else /* !(CONFIG_KVM_PARA && KVM_CAP_ADJUST_CLOCK) */
-
-void kvmclock_create(void)
-{
-}
-#endif /* !(CONFIG_KVM_PARA && KVM_CAP_ADJUST_CLOCK) */
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 1ae2d61..0efcf97 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -18,6 +18,7 @@
#include <sys/utsname.h>
#include <linux/kvm.h>
+#include <linux/kvm_para.h>
#include "qemu-common.h"
#include "sysemu.h"
@@ -29,10 +30,6 @@
#include "hw/apic.h"
#include "ioport.h"
-#ifdef CONFIG_KVM_PARA
-#include <linux/kvm_para.h>
-#endif
-//
//#define DEBUG_KVM
#ifdef DEBUG_KVM
@@ -62,9 +59,7 @@ const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
static bool has_msr_star;
static bool has_msr_hsave_pa;
-#if defined(CONFIG_KVM_PARA) && defined(KVM_CAP_ASYNC_PF)
static bool has_msr_async_pf_en;
-#endif
static int lm_capable_kernel;
static struct kvm_cpuid2 *try_get_cpuid(KVMState *s, int max)
@@ -92,7 +87,6 @@ static struct kvm_cpuid2 *try_get_cpuid(KVMState *s, int max)
return cpuid;
}
-#ifdef CONFIG_KVM_PARA
struct kvm_para_features {
int cap;
int feature;
@@ -118,7 +112,6 @@ static int get_para_features(CPUState *env)
return features;
}
-#endif
uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
@@ -128,9 +121,7 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
int i, max;
uint32_t ret = 0;
uint32_t cpuid_1_edx;
-#ifdef CONFIG_KVM_PARA
int has_kvm_features = 0;
-#endif
max = 1;
while ((cpuid = try_get_cpuid(env->kvm_state, max)) == NULL) {
@@ -140,11 +131,9 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
for (i = 0; i < cpuid->nent; ++i) {
if (cpuid->entries[i].function == function &&
cpuid->entries[i].index == index) {
-#ifdef CONFIG_KVM_PARA
if (cpuid->entries[i].function == KVM_CPUID_FEATURES) {
has_kvm_features = 1;
}
-#endif
switch (reg) {
case R_EAX:
ret = cpuid->entries[i].eax;
@@ -177,12 +166,10 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
qemu_free(cpuid);
-#ifdef CONFIG_KVM_PARA
/* fallback for older kernels */
if (!has_kvm_features && (function == KVM_CPUID_FEATURES)) {
ret = get_para_features(env);
}
-#endif
return ret;
}
@@ -377,9 +364,7 @@ int kvm_arch_init_vcpu(CPUState *env)
uint32_t limit, i, j, cpuid_i;
uint32_t unused;
struct kvm_cpuid_entry2 *c;
-#ifdef CONFIG_KVM_PARA
uint32_t signature[3];
-#endif
env->cpuid_features &= kvm_arch_get_supported_cpuid(env, 1, 0, R_EDX);
@@ -397,7 +382,6 @@ int kvm_arch_init_vcpu(CPUState *env)
cpuid_i = 0;
-#ifdef CONFIG_KVM_PARA
/* Paravirtualization CPUIDs */
memcpy(signature, "KVMKVMKVM\0\0\0", 12);
c = &cpuid_data.entries[cpuid_i++];
@@ -418,8 +402,6 @@ int kvm_arch_init_vcpu(CPUState *env)
has_msr_async_pf_en = c->eax & (1 << KVM_FEATURE_ASYNC_PF);
#endif
-#endif
-
cpu_x86_cpuid(env, 0, 0, &limit, &unused, &unused, &unused);
for (i = 0; i <= limit; i++) {
@@ -931,12 +913,10 @@ static int kvm_put_msrs(CPUState *env, int level)
kvm_msr_entry_set(&msrs[n++], MSR_KVM_SYSTEM_TIME,
env->system_time_msr);
kvm_msr_entry_set(&msrs[n++], MSR_KVM_WALL_CLOCK, env->wall_clock_msr);
-#if defined(CONFIG_KVM_PARA) && defined(KVM_CAP_ASYNC_PF)
if (has_msr_async_pf_en) {
kvm_msr_entry_set(&msrs[n++], MSR_KVM_ASYNC_PF_EN,
env->async_pf_en_msr);
}
-#endif
}
#ifdef KVM_CAP_MCE
if (env->mcg_cap) {
@@ -1172,11 +1152,9 @@ static int kvm_get_msrs(CPUState *env)
#endif
msrs[n++].index = MSR_KVM_SYSTEM_TIME;
msrs[n++].index = MSR_KVM_WALL_CLOCK;
-#if defined(CONFIG_KVM_PARA) && defined(KVM_CAP_ASYNC_PF)
if (has_msr_async_pf_en) {
msrs[n++].index = MSR_KVM_ASYNC_PF_EN;
}
-#endif
#ifdef KVM_CAP_MCE
if (env->mcg_cap) {
@@ -1253,11 +1231,9 @@ static int kvm_get_msrs(CPUState *env)
}
#endif
break;
-#if defined(CONFIG_KVM_PARA) && defined(KVM_CAP_ASYNC_PF)
case MSR_KVM_ASYNC_PF_EN:
env->async_pf_en_msr = msrs[i].data;
break;
-#endif
}
}
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 04/12] kvm: Drop CONFIG_KVM_PARA
@ 2011-06-08 14:10 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm
The kvm_para.h header is now always available.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
configure | 1 -
hw/kvmclock.c | 9 ---------
target-i386/kvm.c | 26 +-------------------------
3 files changed, 1 insertions(+), 35 deletions(-)
diff --git a/configure b/configure
index 0e1dc46..ed54db9 100755
--- a/configure
+++ b/configure
@@ -3218,7 +3218,6 @@ case "$target_arch2" in
\( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \
\( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then
echo "CONFIG_KVM=y" >> $config_target_mak
- echo "CONFIG_KVM_PARA=y" >> $config_target_mak
if test $vhost_net = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
fi
diff --git a/hw/kvmclock.c b/hw/kvmclock.c
index 004c4ad..692ad18 100644
--- a/hw/kvmclock.c
+++ b/hw/kvmclock.c
@@ -17,8 +17,6 @@
#include "kvm.h"
#include "kvmclock.h"
-#if defined(CONFIG_KVM_PARA) && defined(KVM_CAP_ADJUST_CLOCK)
-
#include <linux/kvm.h>
#include <linux/kvm_para.h>
@@ -120,10 +118,3 @@ static void kvmclock_register_device(void)
}
device_init(kvmclock_register_device);
-
-#else /* !(CONFIG_KVM_PARA && KVM_CAP_ADJUST_CLOCK) */
-
-void kvmclock_create(void)
-{
-}
-#endif /* !(CONFIG_KVM_PARA && KVM_CAP_ADJUST_CLOCK) */
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 1ae2d61..0efcf97 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -18,6 +18,7 @@
#include <sys/utsname.h>
#include <linux/kvm.h>
+#include <linux/kvm_para.h>
#include "qemu-common.h"
#include "sysemu.h"
@@ -29,10 +30,6 @@
#include "hw/apic.h"
#include "ioport.h"
-#ifdef CONFIG_KVM_PARA
-#include <linux/kvm_para.h>
-#endif
-//
//#define DEBUG_KVM
#ifdef DEBUG_KVM
@@ -62,9 +59,7 @@ const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
static bool has_msr_star;
static bool has_msr_hsave_pa;
-#if defined(CONFIG_KVM_PARA) && defined(KVM_CAP_ASYNC_PF)
static bool has_msr_async_pf_en;
-#endif
static int lm_capable_kernel;
static struct kvm_cpuid2 *try_get_cpuid(KVMState *s, int max)
@@ -92,7 +87,6 @@ static struct kvm_cpuid2 *try_get_cpuid(KVMState *s, int max)
return cpuid;
}
-#ifdef CONFIG_KVM_PARA
struct kvm_para_features {
int cap;
int feature;
@@ -118,7 +112,6 @@ static int get_para_features(CPUState *env)
return features;
}
-#endif
uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
@@ -128,9 +121,7 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
int i, max;
uint32_t ret = 0;
uint32_t cpuid_1_edx;
-#ifdef CONFIG_KVM_PARA
int has_kvm_features = 0;
-#endif
max = 1;
while ((cpuid = try_get_cpuid(env->kvm_state, max)) == NULL) {
@@ -140,11 +131,9 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
for (i = 0; i < cpuid->nent; ++i) {
if (cpuid->entries[i].function == function &&
cpuid->entries[i].index == index) {
-#ifdef CONFIG_KVM_PARA
if (cpuid->entries[i].function == KVM_CPUID_FEATURES) {
has_kvm_features = 1;
}
-#endif
switch (reg) {
case R_EAX:
ret = cpuid->entries[i].eax;
@@ -177,12 +166,10 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
qemu_free(cpuid);
-#ifdef CONFIG_KVM_PARA
/* fallback for older kernels */
if (!has_kvm_features && (function == KVM_CPUID_FEATURES)) {
ret = get_para_features(env);
}
-#endif
return ret;
}
@@ -377,9 +364,7 @@ int kvm_arch_init_vcpu(CPUState *env)
uint32_t limit, i, j, cpuid_i;
uint32_t unused;
struct kvm_cpuid_entry2 *c;
-#ifdef CONFIG_KVM_PARA
uint32_t signature[3];
-#endif
env->cpuid_features &= kvm_arch_get_supported_cpuid(env, 1, 0, R_EDX);
@@ -397,7 +382,6 @@ int kvm_arch_init_vcpu(CPUState *env)
cpuid_i = 0;
-#ifdef CONFIG_KVM_PARA
/* Paravirtualization CPUIDs */
memcpy(signature, "KVMKVMKVM\0\0\0", 12);
c = &cpuid_data.entries[cpuid_i++];
@@ -418,8 +402,6 @@ int kvm_arch_init_vcpu(CPUState *env)
has_msr_async_pf_en = c->eax & (1 << KVM_FEATURE_ASYNC_PF);
#endif
-#endif
-
cpu_x86_cpuid(env, 0, 0, &limit, &unused, &unused, &unused);
for (i = 0; i <= limit; i++) {
@@ -931,12 +913,10 @@ static int kvm_put_msrs(CPUState *env, int level)
kvm_msr_entry_set(&msrs[n++], MSR_KVM_SYSTEM_TIME,
env->system_time_msr);
kvm_msr_entry_set(&msrs[n++], MSR_KVM_WALL_CLOCK, env->wall_clock_msr);
-#if defined(CONFIG_KVM_PARA) && defined(KVM_CAP_ASYNC_PF)
if (has_msr_async_pf_en) {
kvm_msr_entry_set(&msrs[n++], MSR_KVM_ASYNC_PF_EN,
env->async_pf_en_msr);
}
-#endif
}
#ifdef KVM_CAP_MCE
if (env->mcg_cap) {
@@ -1172,11 +1152,9 @@ static int kvm_get_msrs(CPUState *env)
#endif
msrs[n++].index = MSR_KVM_SYSTEM_TIME;
msrs[n++].index = MSR_KVM_WALL_CLOCK;
-#if defined(CONFIG_KVM_PARA) && defined(KVM_CAP_ASYNC_PF)
if (has_msr_async_pf_en) {
msrs[n++].index = MSR_KVM_ASYNC_PF_EN;
}
-#endif
#ifdef KVM_CAP_MCE
if (env->mcg_cap) {
@@ -1253,11 +1231,9 @@ static int kvm_get_msrs(CPUState *env)
}
#endif
break;
-#if defined(CONFIG_KVM_PARA) && defined(KVM_CAP_ASYNC_PF)
case MSR_KVM_ASYNC_PF_EN:
env->async_pf_en_msr = msrs[i].data;
break;
-#endif
}
}
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 05/12] kvm: ppc: Drop CONFIG_KVM_PPC_PVR
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:10 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel, Alexander Graf
Required header support is now unconditionally available.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
configure | 1 -
target-ppc/kvm.c | 9 ---------
2 files changed, 0 insertions(+), 10 deletions(-)
diff --git a/configure b/configure
index ed54db9..0947f98 100755
--- a/configure
+++ b/configure
@@ -3221,7 +3221,6 @@ case "$target_arch2" in
if test $vhost_net = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
fi
- echo "CONFIG_KVM_PPC_PVR=y" >> $config_target_mak
fi
esac
if test "$target_bigendian" = "yes" ; then
diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c
index e7b1b10..0500e3f 100644
--- a/target-ppc/kvm.c
+++ b/target-ppc/kvm.c
@@ -104,21 +104,12 @@ static int kvm_arch_sync_sregs(CPUState *cenv)
}
}
-#if !defined(CONFIG_KVM_PPC_PVR)
- if (1) {
- fprintf(stderr, "kvm error: missing PVR setting capability\n");
- return -ENOSYS;
- }
-#endif
-
ret = kvm_vcpu_ioctl(cenv, KVM_GET_SREGS, &sregs);
if (ret) {
return ret;
}
-#ifdef CONFIG_KVM_PPC_PVR
sregs.pvr = cenv->spr[SPR_PVR];
-#endif
return kvm_vcpu_ioctl(cenv, KVM_SET_SREGS, &sregs);
}
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 05/12] kvm: ppc: Drop CONFIG_KVM_PPC_PVR
@ 2011-06-08 14:10 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:10 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm, Alexander Graf
Required header support is now unconditionally available.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
configure | 1 -
target-ppc/kvm.c | 9 ---------
2 files changed, 0 insertions(+), 10 deletions(-)
diff --git a/configure b/configure
index ed54db9..0947f98 100755
--- a/configure
+++ b/configure
@@ -3221,7 +3221,6 @@ case "$target_arch2" in
if test $vhost_net = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_target_mak
fi
- echo "CONFIG_KVM_PPC_PVR=y" >> $config_target_mak
fi
esac
if test "$target_bigendian" = "yes" ; then
diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c
index e7b1b10..0500e3f 100644
--- a/target-ppc/kvm.c
+++ b/target-ppc/kvm.c
@@ -104,21 +104,12 @@ static int kvm_arch_sync_sregs(CPUState *cenv)
}
}
-#if !defined(CONFIG_KVM_PPC_PVR)
- if (1) {
- fprintf(stderr, "kvm error: missing PVR setting capability\n");
- return -ENOSYS;
- }
-#endif
-
ret = kvm_vcpu_ioctl(cenv, KVM_GET_SREGS, &sregs);
if (ret) {
return ret;
}
-#ifdef CONFIG_KVM_PPC_PVR
sregs.pvr = cenv->spr[SPR_PVR];
-#endif
return kvm_vcpu_ioctl(cenv, KVM_SET_SREGS, &sregs);
}
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [PATCH 05/12] kvm: ppc: Drop CONFIG_KVM_PPC_PVR
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-14 11:06 ` Alexander Graf
-1 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:06 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel
On 08.06.2011, at 16:10, Jan Kiszka wrote:
> Required header support is now unconditionally available.
Looks good to me :)
Reviewed-by: Alexander Graf <agraf@suse.de>
Alex
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 06/12] kvm: Drop useless zero-initializations
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:11 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel
Backing KVMState is alreay zero-initialized.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
kvm-all.c | 5 -----
1 files changed, 0 insertions(+), 5 deletions(-)
diff --git a/kvm-all.c b/kvm-all.c
index 106eb3a..4a9910a 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -764,28 +764,23 @@ int kvm_init(void)
}
#endif
- s->vcpu_events = 0;
#ifdef KVM_CAP_VCPU_EVENTS
s->vcpu_events = kvm_check_extension(s, KVM_CAP_VCPU_EVENTS);
#endif
- s->robust_singlestep = 0;
#ifdef KVM_CAP_X86_ROBUST_SINGLESTEP
s->robust_singlestep =
kvm_check_extension(s, KVM_CAP_X86_ROBUST_SINGLESTEP);
#endif
- s->debugregs = 0;
#ifdef KVM_CAP_DEBUGREGS
s->debugregs = kvm_check_extension(s, KVM_CAP_DEBUGREGS);
#endif
- s->xsave = 0;
#ifdef KVM_CAP_XSAVE
s->xsave = kvm_check_extension(s, KVM_CAP_XSAVE);
#endif
- s->xcrs = 0;
#ifdef KVM_CAP_XCRS
s->xcrs = kvm_check_extension(s, KVM_CAP_XCRS);
#endif
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 06/12] kvm: Drop useless zero-initializations
@ 2011-06-08 14:11 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm
Backing KVMState is alreay zero-initialized.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
kvm-all.c | 5 -----
1 files changed, 0 insertions(+), 5 deletions(-)
diff --git a/kvm-all.c b/kvm-all.c
index 106eb3a..4a9910a 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -764,28 +764,23 @@ int kvm_init(void)
}
#endif
- s->vcpu_events = 0;
#ifdef KVM_CAP_VCPU_EVENTS
s->vcpu_events = kvm_check_extension(s, KVM_CAP_VCPU_EVENTS);
#endif
- s->robust_singlestep = 0;
#ifdef KVM_CAP_X86_ROBUST_SINGLESTEP
s->robust_singlestep =
kvm_check_extension(s, KVM_CAP_X86_ROBUST_SINGLESTEP);
#endif
- s->debugregs = 0;
#ifdef KVM_CAP_DEBUGREGS
s->debugregs = kvm_check_extension(s, KVM_CAP_DEBUGREGS);
#endif
- s->xsave = 0;
#ifdef KVM_CAP_XSAVE
s->xsave = kvm_check_extension(s, KVM_CAP_XSAVE);
#endif
- s->xcrs = 0;
#ifdef KVM_CAP_XCRS
s->xcrs = kvm_check_extension(s, KVM_CAP_XCRS);
#endif
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:11 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel, Alexander Graf
No longer needed with accompanied kernel headers. We are only left with
build dependencies that are controlled by kvm arch headers.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
kvm-all.c | 8 --------
1 files changed, 0 insertions(+), 8 deletions(-)
diff --git a/kvm-all.c b/kvm-all.c
index 4a9910a..cbc2532 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -757,21 +757,17 @@ int kvm_init(void)
s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
s->broken_set_mem_region = 1;
-#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
if (ret > 0) {
s->broken_set_mem_region = 0;
}
-#endif
#ifdef KVM_CAP_VCPU_EVENTS
s->vcpu_events = kvm_check_extension(s, KVM_CAP_VCPU_EVENTS);
#endif
-#ifdef KVM_CAP_X86_ROBUST_SINGLESTEP
s->robust_singlestep =
kvm_check_extension(s, KVM_CAP_X86_ROBUST_SINGLESTEP);
-#endif
#ifdef KVM_CAP_DEBUGREGS
s->debugregs = kvm_check_extension(s, KVM_CAP_DEBUGREGS);
@@ -850,7 +846,6 @@ static void kvm_handle_io(uint16_t port, void *data, int direction, int size,
}
}
-#ifdef KVM_CAP_INTERNAL_ERROR_DATA
static int kvm_handle_internal_error(CPUState *env, struct kvm_run *run)
{
fprintf(stderr, "KVM internal error.");
@@ -877,7 +872,6 @@ static int kvm_handle_internal_error(CPUState *env, struct kvm_run *run)
*/
return -1;
}
-#endif
void kvm_flush_coalesced_mmio_buffer(void)
{
@@ -1008,11 +1002,9 @@ int kvm_cpu_exec(CPUState *env)
(uint64_t)run->hw.hardware_exit_reason);
ret = -1;
break;
-#ifdef KVM_CAP_INTERNAL_ERROR_DATA
case KVM_EXIT_INTERNAL_ERROR:
ret = kvm_handle_internal_error(env, run);
break;
-#endif
default:
DPRINTF("kvm_arch_handle_exit\n");
ret = kvm_arch_handle_exit(env, run);
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
@ 2011-06-08 14:11 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm, Alexander Graf
No longer needed with accompanied kernel headers. We are only left with
build dependencies that are controlled by kvm arch headers.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
kvm-all.c | 8 --------
1 files changed, 0 insertions(+), 8 deletions(-)
diff --git a/kvm-all.c b/kvm-all.c
index 4a9910a..cbc2532 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -757,21 +757,17 @@ int kvm_init(void)
s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
s->broken_set_mem_region = 1;
-#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
if (ret > 0) {
s->broken_set_mem_region = 0;
}
-#endif
#ifdef KVM_CAP_VCPU_EVENTS
s->vcpu_events = kvm_check_extension(s, KVM_CAP_VCPU_EVENTS);
#endif
-#ifdef KVM_CAP_X86_ROBUST_SINGLESTEP
s->robust_singlestep =
kvm_check_extension(s, KVM_CAP_X86_ROBUST_SINGLESTEP);
-#endif
#ifdef KVM_CAP_DEBUGREGS
s->debugregs = kvm_check_extension(s, KVM_CAP_DEBUGREGS);
@@ -850,7 +846,6 @@ static void kvm_handle_io(uint16_t port, void *data, int direction, int size,
}
}
-#ifdef KVM_CAP_INTERNAL_ERROR_DATA
static int kvm_handle_internal_error(CPUState *env, struct kvm_run *run)
{
fprintf(stderr, "KVM internal error.");
@@ -877,7 +872,6 @@ static int kvm_handle_internal_error(CPUState *env, struct kvm_run *run)
*/
return -1;
}
-#endif
void kvm_flush_coalesced_mmio_buffer(void)
{
@@ -1008,11 +1002,9 @@ int kvm_cpu_exec(CPUState *env)
(uint64_t)run->hw.hardware_exit_reason);
ret = -1;
break;
-#ifdef KVM_CAP_INTERNAL_ERROR_DATA
case KVM_EXIT_INTERNAL_ERROR:
ret = kvm_handle_internal_error(env, run);
break;
-#endif
default:
DPRINTF("kvm_arch_handle_exit\n");
ret = kvm_arch_handle_exit(env, run);
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
2011-06-08 14:11 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-14 11:05 ` Alexander Graf
-1 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:05 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel
On 08.06.2011, at 16:11, Jan Kiszka wrote:
> No longer needed with accompanied kernel headers. We are only left with
> build dependencies that are controlled by kvm arch headers.
This should completely rule out all CAPs right? IIRC, all CAPs are defined in generic code, so we don't get number overlaps.
>
> CC: Alexander Graf <agraf@suse.de>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
> kvm-all.c | 8 --------
> 1 files changed, 0 insertions(+), 8 deletions(-)
>
> diff --git a/kvm-all.c b/kvm-all.c
> index 4a9910a..cbc2532 100644
> --- a/kvm-all.c
> +++ b/kvm-all.c
> @@ -757,21 +757,17 @@ int kvm_init(void)
> s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
>
> s->broken_set_mem_region = 1;
> -#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
> ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
> if (ret > 0) {
> s->broken_set_mem_region = 0;
> }
> -#endif
>
> #ifdef KVM_CAP_VCPU_EVENTS
... which leaves the question why this one is still here :).
Alex
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
@ 2011-06-14 11:05 ` Alexander Graf
0 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:05 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On 08.06.2011, at 16:11, Jan Kiszka wrote:
> No longer needed with accompanied kernel headers. We are only left with
> build dependencies that are controlled by kvm arch headers.
This should completely rule out all CAPs right? IIRC, all CAPs are defined in generic code, so we don't get number overlaps.
>
> CC: Alexander Graf <agraf@suse.de>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
> kvm-all.c | 8 --------
> 1 files changed, 0 insertions(+), 8 deletions(-)
>
> diff --git a/kvm-all.c b/kvm-all.c
> index 4a9910a..cbc2532 100644
> --- a/kvm-all.c
> +++ b/kvm-all.c
> @@ -757,21 +757,17 @@ int kvm_init(void)
> s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
>
> s->broken_set_mem_region = 1;
> -#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
> ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
> if (ret > 0) {
> s->broken_set_mem_region = 0;
> }
> -#endif
>
> #ifdef KVM_CAP_VCPU_EVENTS
... which leaves the question why this one is still here :).
Alex
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
2011-06-14 11:05 ` [Qemu-devel] " Alexander Graf
@ 2011-06-14 11:07 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-14 11:07 UTC (permalink / raw)
To: Alexander Graf; +Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel
On 2011-06-14 13:05, Alexander Graf wrote:
>
> On 08.06.2011, at 16:11, Jan Kiszka wrote:
>
>> No longer needed with accompanied kernel headers. We are only left with
>> build dependencies that are controlled by kvm arch headers.
>
> This should completely rule out all CAPs right? IIRC, all CAPs are defined in generic code, so we don't get number overlaps.
"We are only left with build dependencies that are controlled by kvm
arch headers." E.g. KVM_CAP_VCPU_EVENTS.
>
>>
>> CC: Alexander Graf <agraf@suse.de>
>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>> ---
>> kvm-all.c | 8 --------
>> 1 files changed, 0 insertions(+), 8 deletions(-)
>>
>> diff --git a/kvm-all.c b/kvm-all.c
>> index 4a9910a..cbc2532 100644
>> --- a/kvm-all.c
>> +++ b/kvm-all.c
>> @@ -757,21 +757,17 @@ int kvm_init(void)
>> s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
>>
>> s->broken_set_mem_region = 1;
>> -#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
>> ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
>> if (ret > 0) {
>> s->broken_set_mem_region = 0;
>> }
>> -#endif
>>
>> #ifdef KVM_CAP_VCPU_EVENTS
>
> ... which leaves the question why this one is still here :).
See above (does PPC support it?).
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
@ 2011-06-14 11:07 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-14 11:07 UTC (permalink / raw)
To: Alexander Graf; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On 2011-06-14 13:05, Alexander Graf wrote:
>
> On 08.06.2011, at 16:11, Jan Kiszka wrote:
>
>> No longer needed with accompanied kernel headers. We are only left with
>> build dependencies that are controlled by kvm arch headers.
>
> This should completely rule out all CAPs right? IIRC, all CAPs are defined in generic code, so we don't get number overlaps.
"We are only left with build dependencies that are controlled by kvm
arch headers." E.g. KVM_CAP_VCPU_EVENTS.
>
>>
>> CC: Alexander Graf <agraf@suse.de>
>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>> ---
>> kvm-all.c | 8 --------
>> 1 files changed, 0 insertions(+), 8 deletions(-)
>>
>> diff --git a/kvm-all.c b/kvm-all.c
>> index 4a9910a..cbc2532 100644
>> --- a/kvm-all.c
>> +++ b/kvm-all.c
>> @@ -757,21 +757,17 @@ int kvm_init(void)
>> s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
>>
>> s->broken_set_mem_region = 1;
>> -#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
>> ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
>> if (ret > 0) {
>> s->broken_set_mem_region = 0;
>> }
>> -#endif
>>
>> #ifdef KVM_CAP_VCPU_EVENTS
>
> ... which leaves the question why this one is still here :).
See above (does PPC support it?).
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
2011-06-14 11:07 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-14 11:17 ` Alexander Graf
-1 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:17 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel
On 14.06.2011, at 13:07, Jan Kiszka wrote:
> On 2011-06-14 13:05, Alexander Graf wrote:
>>
>> On 08.06.2011, at 16:11, Jan Kiszka wrote:
>>
>>> No longer needed with accompanied kernel headers. We are only left with
>>> build dependencies that are controlled by kvm arch headers.
>>
>> This should completely rule out all CAPs right? IIRC, all CAPs are defined in generic code, so we don't get number overlaps.
>
> "We are only left with build dependencies that are controlled by kvm
> arch headers." E.g. KVM_CAP_VCPU_EVENTS.
>
>>
>>>
>>> CC: Alexander Graf <agraf@suse.de>
>>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>>> ---
>>> kvm-all.c | 8 --------
>>> 1 files changed, 0 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/kvm-all.c b/kvm-all.c
>>> index 4a9910a..cbc2532 100644
>>> --- a/kvm-all.c
>>> +++ b/kvm-all.c
>>> @@ -757,21 +757,17 @@ int kvm_init(void)
>>> s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
>>>
>>> s->broken_set_mem_region = 1;
>>> -#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
>>> ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
>>> if (ret > 0) {
>>> s->broken_set_mem_region = 0;
>>> }
>>> -#endif
>>>
>>> #ifdef KVM_CAP_VCPU_EVENTS
>>
>> ... which leaves the question why this one is still here :).
>
> See above (does PPC support it?).
Well, regardless of support, the #ifdef shouldn't be required, right?
include/linux/kvm.h:518:#define KVM_CAP_VCPU_EVENTS 41
... as long as there's a runtime check :)
Alex
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
@ 2011-06-14 11:17 ` Alexander Graf
0 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:17 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On 14.06.2011, at 13:07, Jan Kiszka wrote:
> On 2011-06-14 13:05, Alexander Graf wrote:
>>
>> On 08.06.2011, at 16:11, Jan Kiszka wrote:
>>
>>> No longer needed with accompanied kernel headers. We are only left with
>>> build dependencies that are controlled by kvm arch headers.
>>
>> This should completely rule out all CAPs right? IIRC, all CAPs are defined in generic code, so we don't get number overlaps.
>
> "We are only left with build dependencies that are controlled by kvm
> arch headers." E.g. KVM_CAP_VCPU_EVENTS.
>
>>
>>>
>>> CC: Alexander Graf <agraf@suse.de>
>>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>>> ---
>>> kvm-all.c | 8 --------
>>> 1 files changed, 0 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/kvm-all.c b/kvm-all.c
>>> index 4a9910a..cbc2532 100644
>>> --- a/kvm-all.c
>>> +++ b/kvm-all.c
>>> @@ -757,21 +757,17 @@ int kvm_init(void)
>>> s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
>>>
>>> s->broken_set_mem_region = 1;
>>> -#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
>>> ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
>>> if (ret > 0) {
>>> s->broken_set_mem_region = 0;
>>> }
>>> -#endif
>>>
>>> #ifdef KVM_CAP_VCPU_EVENTS
>>
>> ... which leaves the question why this one is still here :).
>
> See above (does PPC support it?).
Well, regardless of support, the #ifdef shouldn't be required, right?
include/linux/kvm.h:518:#define KVM_CAP_VCPU_EVENTS 41
... as long as there's a runtime check :)
Alex
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
2011-06-14 11:17 ` [Qemu-devel] " Alexander Graf
@ 2011-06-14 11:19 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-14 11:19 UTC (permalink / raw)
To: Alexander Graf; +Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel
On 2011-06-14 13:17, Alexander Graf wrote:
>
> On 14.06.2011, at 13:07, Jan Kiszka wrote:
>
>> On 2011-06-14 13:05, Alexander Graf wrote:
>>>
>>> On 08.06.2011, at 16:11, Jan Kiszka wrote:
>>>
>>>> No longer needed with accompanied kernel headers. We are only left with
>>>> build dependencies that are controlled by kvm arch headers.
>>>
>>> This should completely rule out all CAPs right? IIRC, all CAPs are defined in generic code, so we don't get number overlaps.
>>
>> "We are only left with build dependencies that are controlled by kvm
>> arch headers." E.g. KVM_CAP_VCPU_EVENTS.
>>
>>>
>>>>
>>>> CC: Alexander Graf <agraf@suse.de>
>>>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>>>> ---
>>>> kvm-all.c | 8 --------
>>>> 1 files changed, 0 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/kvm-all.c b/kvm-all.c
>>>> index 4a9910a..cbc2532 100644
>>>> --- a/kvm-all.c
>>>> +++ b/kvm-all.c
>>>> @@ -757,21 +757,17 @@ int kvm_init(void)
>>>> s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
>>>>
>>>> s->broken_set_mem_region = 1;
>>>> -#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
>>>> ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
>>>> if (ret > 0) {
>>>> s->broken_set_mem_region = 0;
>>>> }
>>>> -#endif
>>>>
>>>> #ifdef KVM_CAP_VCPU_EVENTS
>>>
>>> ... which leaves the question why this one is still here :).
>>
>> See above (does PPC support it?).
>
> Well, regardless of support, the #ifdef shouldn't be required, right?
>
> include/linux/kvm.h:518:#define KVM_CAP_VCPU_EVENTS 41
>
> ... as long as there's a runtime check :)
Are all types and dependent constants available? Maybe it is the case
here, but you cannot generally assume this if a CAP is per-arch.
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
@ 2011-06-14 11:19 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-14 11:19 UTC (permalink / raw)
To: Alexander Graf; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On 2011-06-14 13:17, Alexander Graf wrote:
>
> On 14.06.2011, at 13:07, Jan Kiszka wrote:
>
>> On 2011-06-14 13:05, Alexander Graf wrote:
>>>
>>> On 08.06.2011, at 16:11, Jan Kiszka wrote:
>>>
>>>> No longer needed with accompanied kernel headers. We are only left with
>>>> build dependencies that are controlled by kvm arch headers.
>>>
>>> This should completely rule out all CAPs right? IIRC, all CAPs are defined in generic code, so we don't get number overlaps.
>>
>> "We are only left with build dependencies that are controlled by kvm
>> arch headers." E.g. KVM_CAP_VCPU_EVENTS.
>>
>>>
>>>>
>>>> CC: Alexander Graf <agraf@suse.de>
>>>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>>>> ---
>>>> kvm-all.c | 8 --------
>>>> 1 files changed, 0 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/kvm-all.c b/kvm-all.c
>>>> index 4a9910a..cbc2532 100644
>>>> --- a/kvm-all.c
>>>> +++ b/kvm-all.c
>>>> @@ -757,21 +757,17 @@ int kvm_init(void)
>>>> s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
>>>>
>>>> s->broken_set_mem_region = 1;
>>>> -#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
>>>> ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
>>>> if (ret > 0) {
>>>> s->broken_set_mem_region = 0;
>>>> }
>>>> -#endif
>>>>
>>>> #ifdef KVM_CAP_VCPU_EVENTS
>>>
>>> ... which leaves the question why this one is still here :).
>>
>> See above (does PPC support it?).
>
> Well, regardless of support, the #ifdef shouldn't be required, right?
>
> include/linux/kvm.h:518:#define KVM_CAP_VCPU_EVENTS 41
>
> ... as long as there's a runtime check :)
Are all types and dependent constants available? Maybe it is the case
here, but you cannot generally assume this if a CAP is per-arch.
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
2011-06-14 11:19 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-14 11:25 ` Alexander Graf
-1 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:25 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel
On 14.06.2011, at 13:19, Jan Kiszka wrote:
> On 2011-06-14 13:17, Alexander Graf wrote:
>>
>> On 14.06.2011, at 13:07, Jan Kiszka wrote:
>>
>>> On 2011-06-14 13:05, Alexander Graf wrote:
>>>>
>>>> On 08.06.2011, at 16:11, Jan Kiszka wrote:
>>>>
>>>>> No longer needed with accompanied kernel headers. We are only left with
>>>>> build dependencies that are controlled by kvm arch headers.
>>>>
>>>> This should completely rule out all CAPs right? IIRC, all CAPs are defined in generic code, so we don't get number overlaps.
>>>
>>> "We are only left with build dependencies that are controlled by kvm
>>> arch headers." E.g. KVM_CAP_VCPU_EVENTS.
>>>
>>>>
>>>>>
>>>>> CC: Alexander Graf <agraf@suse.de>
>>>>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>>>>> ---
>>>>> kvm-all.c | 8 --------
>>>>> 1 files changed, 0 insertions(+), 8 deletions(-)
>>>>>
>>>>> diff --git a/kvm-all.c b/kvm-all.c
>>>>> index 4a9910a..cbc2532 100644
>>>>> --- a/kvm-all.c
>>>>> +++ b/kvm-all.c
>>>>> @@ -757,21 +757,17 @@ int kvm_init(void)
>>>>> s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
>>>>>
>>>>> s->broken_set_mem_region = 1;
>>>>> -#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
>>>>> ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
>>>>> if (ret > 0) {
>>>>> s->broken_set_mem_region = 0;
>>>>> }
>>>>> -#endif
>>>>>
>>>>> #ifdef KVM_CAP_VCPU_EVENTS
>>>>
>>>> ... which leaves the question why this one is still here :).
>>>
>>> See above (does PPC support it?).
>>
>> Well, regardless of support, the #ifdef shouldn't be required, right?
>>
>> include/linux/kvm.h:518:#define KVM_CAP_VCPU_EVENTS 41
>>
>> ... as long as there's a runtime check :)
>
> Are all types and dependent constants available? Maybe it is the case
> here, but you cannot generally assume this if a CAP is per-arch.
Ah, I see what you mean. Maybe it'd be easier to use __KVM_HAVE_VCPU_EVENTS instead of the implicitly defined CAP? But then again, once all the version CAP #ifdefs are gone, the only ones left are the ones for arch features, so I guess your approach is valid :)
Alex
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 07/12] kvm: Drop KVM_CAP build dependencies
@ 2011-06-14 11:25 ` Alexander Graf
0 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:25 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On 14.06.2011, at 13:19, Jan Kiszka wrote:
> On 2011-06-14 13:17, Alexander Graf wrote:
>>
>> On 14.06.2011, at 13:07, Jan Kiszka wrote:
>>
>>> On 2011-06-14 13:05, Alexander Graf wrote:
>>>>
>>>> On 08.06.2011, at 16:11, Jan Kiszka wrote:
>>>>
>>>>> No longer needed with accompanied kernel headers. We are only left with
>>>>> build dependencies that are controlled by kvm arch headers.
>>>>
>>>> This should completely rule out all CAPs right? IIRC, all CAPs are defined in generic code, so we don't get number overlaps.
>>>
>>> "We are only left with build dependencies that are controlled by kvm
>>> arch headers." E.g. KVM_CAP_VCPU_EVENTS.
>>>
>>>>
>>>>>
>>>>> CC: Alexander Graf <agraf@suse.de>
>>>>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>>>>> ---
>>>>> kvm-all.c | 8 --------
>>>>> 1 files changed, 0 insertions(+), 8 deletions(-)
>>>>>
>>>>> diff --git a/kvm-all.c b/kvm-all.c
>>>>> index 4a9910a..cbc2532 100644
>>>>> --- a/kvm-all.c
>>>>> +++ b/kvm-all.c
>>>>> @@ -757,21 +757,17 @@ int kvm_init(void)
>>>>> s->coalesced_mmio = kvm_check_extension(s, KVM_CAP_COALESCED_MMIO);
>>>>>
>>>>> s->broken_set_mem_region = 1;
>>>>> -#ifdef KVM_CAP_JOIN_MEMORY_REGIONS_WORKS
>>>>> ret = kvm_check_extension(s, KVM_CAP_JOIN_MEMORY_REGIONS_WORKS);
>>>>> if (ret > 0) {
>>>>> s->broken_set_mem_region = 0;
>>>>> }
>>>>> -#endif
>>>>>
>>>>> #ifdef KVM_CAP_VCPU_EVENTS
>>>>
>>>> ... which leaves the question why this one is still here :).
>>>
>>> See above (does PPC support it?).
>>
>> Well, regardless of support, the #ifdef shouldn't be required, right?
>>
>> include/linux/kvm.h:518:#define KVM_CAP_VCPU_EVENTS 41
>>
>> ... as long as there's a runtime check :)
>
> Are all types and dependent constants available? Maybe it is the case
> here, but you cannot generally assume this if a CAP is per-arch.
Ah, I see what you mean. Maybe it'd be easier to use __KVM_HAVE_VCPU_EVENTS instead of the implicitly defined CAP? But then again, once all the version CAP #ifdefs are gone, the only ones left are the ones for arch features, so I guess your approach is valid :)
Alex
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 08/12] kvm: x86: Drop KVM_CAP build dependencies
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:11 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel
No longer needed with accompanied kernel headers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
target-i386/kvm.c | 67 ++--------------------------------------------------
1 files changed, 3 insertions(+), 64 deletions(-)
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 0efcf97..1c2d32c 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -94,9 +94,7 @@ struct kvm_para_features {
{ KVM_CAP_CLOCKSOURCE, KVM_FEATURE_CLOCKSOURCE },
{ KVM_CAP_NOP_IO_DELAY, KVM_FEATURE_NOP_IO_DELAY },
{ KVM_CAP_PV_MMU, KVM_FEATURE_MMU_OP },
-#ifdef KVM_CAP_ASYNC_PF
{ KVM_CAP_ASYNC_PF, KVM_FEATURE_ASYNC_PF },
-#endif
{ -1, -1 }
};
@@ -193,7 +191,6 @@ static void kvm_unpoison_all(void *param)
}
}
-#ifdef KVM_CAP_MCE
static void kvm_hwpoison_page_add(ram_addr_t ram_addr)
{
HWPoisonPage *page;
@@ -239,7 +236,6 @@ static void kvm_mce_inject(CPUState *env, target_phys_addr_t paddr, int code)
cpu_x86_support_mca_broadcast(env) ?
MCE_INJECT_BROADCAST : 0);
}
-#endif /* KVM_CAP_MCE */
static void hardware_memory_error(void)
{
@@ -249,7 +245,6 @@ static void hardware_memory_error(void)
int kvm_arch_on_sigbus_vcpu(CPUState *env, int code, void *addr)
{
-#ifdef KVM_CAP_MCE
ram_addr_t ram_addr;
target_phys_addr_t paddr;
@@ -269,9 +264,7 @@ int kvm_arch_on_sigbus_vcpu(CPUState *env, int code, void *addr)
}
kvm_hwpoison_page_add(ram_addr);
kvm_mce_inject(env, paddr, code);
- } else
-#endif /* KVM_CAP_MCE */
- {
+ } else {
if (code == BUS_MCEERR_AO) {
return 0;
} else if (code == BUS_MCEERR_AR) {
@@ -285,7 +278,6 @@ int kvm_arch_on_sigbus_vcpu(CPUState *env, int code, void *addr)
int kvm_arch_on_sigbus(int code, void *addr)
{
-#ifdef KVM_CAP_MCE
if ((first_cpu->mcg_cap & MCG_SER_P) && addr && code == BUS_MCEERR_AO) {
ram_addr_t ram_addr;
target_phys_addr_t paddr;
@@ -300,9 +292,7 @@ int kvm_arch_on_sigbus(int code, void *addr)
}
kvm_hwpoison_page_add(ram_addr);
kvm_mce_inject(first_cpu, paddr, code);
- } else
-#endif /* KVM_CAP_MCE */
- {
+ } else {
if (code == BUS_MCEERR_AO) {
return 0;
} else if (code == BUS_MCEERR_AR) {
@@ -316,7 +306,6 @@ int kvm_arch_on_sigbus(int code, void *addr)
static int kvm_inject_mce_oldstyle(CPUState *env)
{
-#ifdef KVM_CAP_MCE
if (!kvm_has_vcpu_events() && env->exception_injected == EXCP12_MCHK) {
unsigned int bank, bank_num = env->mcg_cap & 0xff;
struct kvm_x86_mce mce;
@@ -342,7 +331,6 @@ static int kvm_inject_mce_oldstyle(CPUState *env)
return kvm_vcpu_ioctl(env, KVM_X86_SET_MCE, &mce);
}
-#endif /* KVM_CAP_MCE */
return 0;
}
@@ -398,9 +386,7 @@ int kvm_arch_init_vcpu(CPUState *env)
c->eax = env->cpuid_kvm_features & kvm_arch_get_supported_cpuid(env,
KVM_CPUID_FEATURES, 0, R_EAX);
-#ifdef KVM_CAP_ASYNC_PF
has_msr_async_pf_en = c->eax & (1 << KVM_FEATURE_ASYNC_PF);
-#endif
cpu_x86_cpuid(env, 0, 0, &limit, &unused, &unused, &unused);
@@ -481,7 +467,6 @@ int kvm_arch_init_vcpu(CPUState *env)
cpuid_data.cpuid.nent = cpuid_i;
-#ifdef KVM_CAP_MCE
if (((env->cpuid_version >> 8)&0xF) >= 6
&& (env->cpuid_features&(CPUID_MCE|CPUID_MCA)) == (CPUID_MCE|CPUID_MCA)
&& kvm_check_extension(env->kvm_state, KVM_CAP_MCE) > 0) {
@@ -508,7 +493,6 @@ int kvm_arch_init_vcpu(CPUState *env)
env->mcg_cap = mcg_cap;
}
-#endif
qemu_add_vm_change_state_handler(cpu_update_state, env);
@@ -600,7 +584,6 @@ int kvm_arch_init(KVMState *s)
* that case we need to stick with the default, i.e. a 256K maximum BIOS
* size.
*/
-#ifdef KVM_CAP_SET_IDENTITY_MAP_ADDR
if (kvm_check_extension(s, KVM_CAP_SET_IDENTITY_MAP_ADDR)) {
/* Allows up to 16M BIOSes. */
identity_base = 0xfeffc000;
@@ -610,7 +593,7 @@ int kvm_arch_init(KVMState *s)
return ret;
}
}
-#endif
+
/* Set TSS base one page after EPT identity map. */
ret = kvm_vm_ioctl(s, KVM_SET_TSS_ADDR, identity_base + 0x1000);
if (ret < 0) {
@@ -745,7 +728,6 @@ static int kvm_put_fpu(CPUState *env)
return kvm_vcpu_ioctl(env, KVM_SET_FPU, &fpu);
}
-#ifdef KVM_CAP_XSAVE
#define XSAVE_CWD_RIP 2
#define XSAVE_CWD_RDP 4
#define XSAVE_MXCSR 6
@@ -753,11 +735,9 @@ static int kvm_put_fpu(CPUState *env)
#define XSAVE_XMM_SPACE 40
#define XSAVE_XSTATE_BV 128
#define XSAVE_YMMH_SPACE 144
-#endif
static int kvm_put_xsave(CPUState *env)
{
-#ifdef KVM_CAP_XSAVE
int i, r;
struct kvm_xsave* xsave;
uint16_t cwd, swd, twd, fop;
@@ -788,14 +768,10 @@ static int kvm_put_xsave(CPUState *env)
r = kvm_vcpu_ioctl(env, KVM_SET_XSAVE, xsave);
qemu_free(xsave);
return r;
-#else
- return kvm_put_fpu(env);
-#endif
}
static int kvm_put_xcrs(CPUState *env)
{
-#ifdef KVM_CAP_XCRS
struct kvm_xcrs xcrs;
if (!kvm_has_xcrs()) {
@@ -807,9 +783,6 @@ static int kvm_put_xcrs(CPUState *env)
xcrs.xcrs[0].xcr = 0;
xcrs.xcrs[0].value = env->xcr0;
return kvm_vcpu_ioctl(env, KVM_SET_XCRS, &xcrs);
-#else
- return 0;
-#endif
}
static int kvm_put_sregs(CPUState *env)
@@ -918,7 +891,6 @@ static int kvm_put_msrs(CPUState *env, int level)
env->async_pf_en_msr);
}
}
-#ifdef KVM_CAP_MCE
if (env->mcg_cap) {
int i;
@@ -928,7 +900,6 @@ static int kvm_put_msrs(CPUState *env, int level)
kvm_msr_entry_set(&msrs[n++], MSR_MC0_CTL + i, env->mce_banks[i]);
}
}
-#endif
msr_data.info.nmsrs = n;
@@ -962,7 +933,6 @@ static int kvm_get_fpu(CPUState *env)
static int kvm_get_xsave(CPUState *env)
{
-#ifdef KVM_CAP_XSAVE
struct kvm_xsave* xsave;
int ret, i;
uint16_t cwd, swd, twd, fop;
@@ -998,14 +968,10 @@ static int kvm_get_xsave(CPUState *env)
sizeof env->ymmh_regs);
qemu_free(xsave);
return 0;
-#else
- return kvm_get_fpu(env);
-#endif
}
static int kvm_get_xcrs(CPUState *env)
{
-#ifdef KVM_CAP_XCRS
int i, ret;
struct kvm_xcrs xcrs;
@@ -1026,9 +992,6 @@ static int kvm_get_xcrs(CPUState *env)
}
}
return 0;
-#else
- return 0;
-#endif
}
static int kvm_get_sregs(CPUState *env)
@@ -1156,7 +1119,6 @@ static int kvm_get_msrs(CPUState *env)
msrs[n++].index = MSR_KVM_ASYNC_PF_EN;
}
-#ifdef KVM_CAP_MCE
if (env->mcg_cap) {
msrs[n++].index = MSR_MCG_STATUS;
msrs[n++].index = MSR_MCG_CTL;
@@ -1164,7 +1126,6 @@ static int kvm_get_msrs(CPUState *env)
msrs[n++].index = MSR_MC0_CTL + i;
}
}
-#endif
msr_data.info.nmsrs = n;
ret = kvm_vcpu_ioctl(env, KVM_GET_MSRS, &msr_data);
@@ -1215,21 +1176,17 @@ static int kvm_get_msrs(CPUState *env)
case MSR_KVM_WALL_CLOCK:
env->wall_clock_msr = msrs[i].data;
break;
-#ifdef KVM_CAP_MCE
case MSR_MCG_STATUS:
env->mcg_status = msrs[i].data;
break;
case MSR_MCG_CTL:
env->mcg_ctl = msrs[i].data;
break;
-#endif
default:
-#ifdef KVM_CAP_MCE
if (msrs[i].index >= MSR_MC0_CTL &&
msrs[i].index < MSR_MC0_CTL + (env->mcg_cap & 0xff) * 4) {
env->mce_banks[msrs[i].index - MSR_MC0_CTL] = msrs[i].data;
}
-#endif
break;
case MSR_KVM_ASYNC_PF_EN:
env->async_pf_en_msr = msrs[i].data;
@@ -1265,7 +1222,6 @@ static int kvm_get_mp_state(CPUState *env)
static int kvm_put_vcpu_events(CPUState *env, int level)
{
-#ifdef KVM_CAP_VCPU_EVENTS
struct kvm_vcpu_events events;
if (!kvm_has_vcpu_events()) {
@@ -1294,14 +1250,10 @@ static int kvm_put_vcpu_events(CPUState *env, int level)
}
return kvm_vcpu_ioctl(env, KVM_SET_VCPU_EVENTS, &events);
-#else
- return 0;
-#endif
}
static int kvm_get_vcpu_events(CPUState *env)
{
-#ifdef KVM_CAP_VCPU_EVENTS
struct kvm_vcpu_events events;
int ret;
@@ -1331,7 +1283,6 @@ static int kvm_get_vcpu_events(CPUState *env)
}
env->sipi_vector = events.sipi_vector;
-#endif
return 0;
}
@@ -1339,7 +1290,6 @@ static int kvm_get_vcpu_events(CPUState *env)
static int kvm_guest_debug_workarounds(CPUState *env)
{
int ret = 0;
-#ifdef KVM_CAP_SET_GUEST_DEBUG
unsigned long reinject_trap = 0;
if (!kvm_has_vcpu_events()) {
@@ -1363,13 +1313,11 @@ static int kvm_guest_debug_workarounds(CPUState *env)
(!kvm_has_robust_singlestep() && env->singlestep_enabled)) {
ret = kvm_update_guest_debug(env, reinject_trap);
}
-#endif /* KVM_CAP_SET_GUEST_DEBUG */
return ret;
}
static int kvm_put_debugregs(CPUState *env)
{
-#ifdef KVM_CAP_DEBUGREGS
struct kvm_debugregs dbgregs;
int i;
@@ -1385,14 +1333,10 @@ static int kvm_put_debugregs(CPUState *env)
dbgregs.flags = 0;
return kvm_vcpu_ioctl(env, KVM_SET_DEBUGREGS, &dbgregs);
-#else
- return 0;
-#endif
}
static int kvm_get_debugregs(CPUState *env)
{
-#ifdef KVM_CAP_DEBUGREGS
struct kvm_debugregs dbgregs;
int i, ret;
@@ -1409,7 +1353,6 @@ static int kvm_get_debugregs(CPUState *env)
}
env->dr[4] = env->dr[6] = dbgregs.dr6;
env->dr[5] = env->dr[7] = dbgregs.dr7;
-#endif
return 0;
}
@@ -1635,7 +1578,6 @@ static int kvm_handle_halt(CPUState *env)
return 0;
}
-#ifdef KVM_CAP_SET_GUEST_DEBUG
int kvm_arch_insert_sw_breakpoint(CPUState *env, struct kvm_sw_breakpoint *bp)
{
static const uint8_t int3 = 0xcc;
@@ -1816,7 +1758,6 @@ void kvm_arch_update_guest_debug(CPUState *env, struct kvm_guest_debug *dbg)
}
}
}
-#endif /* KVM_CAP_SET_GUEST_DEBUG */
static bool host_supports_vmx(void)
{
@@ -1863,12 +1804,10 @@ int kvm_arch_handle_exit(CPUState *env, struct kvm_run *run)
run->ex.exception, run->ex.error_code);
ret = -1;
break;
-#ifdef KVM_CAP_SET_GUEST_DEBUG
case KVM_EXIT_DEBUG:
DPRINTF("kvm_exit_debug\n");
ret = kvm_handle_debug(&run->debug.arch);
break;
-#endif /* KVM_CAP_SET_GUEST_DEBUG */
default:
fprintf(stderr, "KVM: unknown exit reason %d\n", run->exit_reason);
ret = -1;
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 08/12] kvm: x86: Drop KVM_CAP build dependencies
@ 2011-06-08 14:11 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm
No longer needed with accompanied kernel headers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
target-i386/kvm.c | 67 ++--------------------------------------------------
1 files changed, 3 insertions(+), 64 deletions(-)
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 0efcf97..1c2d32c 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -94,9 +94,7 @@ struct kvm_para_features {
{ KVM_CAP_CLOCKSOURCE, KVM_FEATURE_CLOCKSOURCE },
{ KVM_CAP_NOP_IO_DELAY, KVM_FEATURE_NOP_IO_DELAY },
{ KVM_CAP_PV_MMU, KVM_FEATURE_MMU_OP },
-#ifdef KVM_CAP_ASYNC_PF
{ KVM_CAP_ASYNC_PF, KVM_FEATURE_ASYNC_PF },
-#endif
{ -1, -1 }
};
@@ -193,7 +191,6 @@ static void kvm_unpoison_all(void *param)
}
}
-#ifdef KVM_CAP_MCE
static void kvm_hwpoison_page_add(ram_addr_t ram_addr)
{
HWPoisonPage *page;
@@ -239,7 +236,6 @@ static void kvm_mce_inject(CPUState *env, target_phys_addr_t paddr, int code)
cpu_x86_support_mca_broadcast(env) ?
MCE_INJECT_BROADCAST : 0);
}
-#endif /* KVM_CAP_MCE */
static void hardware_memory_error(void)
{
@@ -249,7 +245,6 @@ static void hardware_memory_error(void)
int kvm_arch_on_sigbus_vcpu(CPUState *env, int code, void *addr)
{
-#ifdef KVM_CAP_MCE
ram_addr_t ram_addr;
target_phys_addr_t paddr;
@@ -269,9 +264,7 @@ int kvm_arch_on_sigbus_vcpu(CPUState *env, int code, void *addr)
}
kvm_hwpoison_page_add(ram_addr);
kvm_mce_inject(env, paddr, code);
- } else
-#endif /* KVM_CAP_MCE */
- {
+ } else {
if (code == BUS_MCEERR_AO) {
return 0;
} else if (code == BUS_MCEERR_AR) {
@@ -285,7 +278,6 @@ int kvm_arch_on_sigbus_vcpu(CPUState *env, int code, void *addr)
int kvm_arch_on_sigbus(int code, void *addr)
{
-#ifdef KVM_CAP_MCE
if ((first_cpu->mcg_cap & MCG_SER_P) && addr && code == BUS_MCEERR_AO) {
ram_addr_t ram_addr;
target_phys_addr_t paddr;
@@ -300,9 +292,7 @@ int kvm_arch_on_sigbus(int code, void *addr)
}
kvm_hwpoison_page_add(ram_addr);
kvm_mce_inject(first_cpu, paddr, code);
- } else
-#endif /* KVM_CAP_MCE */
- {
+ } else {
if (code == BUS_MCEERR_AO) {
return 0;
} else if (code == BUS_MCEERR_AR) {
@@ -316,7 +306,6 @@ int kvm_arch_on_sigbus(int code, void *addr)
static int kvm_inject_mce_oldstyle(CPUState *env)
{
-#ifdef KVM_CAP_MCE
if (!kvm_has_vcpu_events() && env->exception_injected == EXCP12_MCHK) {
unsigned int bank, bank_num = env->mcg_cap & 0xff;
struct kvm_x86_mce mce;
@@ -342,7 +331,6 @@ static int kvm_inject_mce_oldstyle(CPUState *env)
return kvm_vcpu_ioctl(env, KVM_X86_SET_MCE, &mce);
}
-#endif /* KVM_CAP_MCE */
return 0;
}
@@ -398,9 +386,7 @@ int kvm_arch_init_vcpu(CPUState *env)
c->eax = env->cpuid_kvm_features & kvm_arch_get_supported_cpuid(env,
KVM_CPUID_FEATURES, 0, R_EAX);
-#ifdef KVM_CAP_ASYNC_PF
has_msr_async_pf_en = c->eax & (1 << KVM_FEATURE_ASYNC_PF);
-#endif
cpu_x86_cpuid(env, 0, 0, &limit, &unused, &unused, &unused);
@@ -481,7 +467,6 @@ int kvm_arch_init_vcpu(CPUState *env)
cpuid_data.cpuid.nent = cpuid_i;
-#ifdef KVM_CAP_MCE
if (((env->cpuid_version >> 8)&0xF) >= 6
&& (env->cpuid_features&(CPUID_MCE|CPUID_MCA)) == (CPUID_MCE|CPUID_MCA)
&& kvm_check_extension(env->kvm_state, KVM_CAP_MCE) > 0) {
@@ -508,7 +493,6 @@ int kvm_arch_init_vcpu(CPUState *env)
env->mcg_cap = mcg_cap;
}
-#endif
qemu_add_vm_change_state_handler(cpu_update_state, env);
@@ -600,7 +584,6 @@ int kvm_arch_init(KVMState *s)
* that case we need to stick with the default, i.e. a 256K maximum BIOS
* size.
*/
-#ifdef KVM_CAP_SET_IDENTITY_MAP_ADDR
if (kvm_check_extension(s, KVM_CAP_SET_IDENTITY_MAP_ADDR)) {
/* Allows up to 16M BIOSes. */
identity_base = 0xfeffc000;
@@ -610,7 +593,7 @@ int kvm_arch_init(KVMState *s)
return ret;
}
}
-#endif
+
/* Set TSS base one page after EPT identity map. */
ret = kvm_vm_ioctl(s, KVM_SET_TSS_ADDR, identity_base + 0x1000);
if (ret < 0) {
@@ -745,7 +728,6 @@ static int kvm_put_fpu(CPUState *env)
return kvm_vcpu_ioctl(env, KVM_SET_FPU, &fpu);
}
-#ifdef KVM_CAP_XSAVE
#define XSAVE_CWD_RIP 2
#define XSAVE_CWD_RDP 4
#define XSAVE_MXCSR 6
@@ -753,11 +735,9 @@ static int kvm_put_fpu(CPUState *env)
#define XSAVE_XMM_SPACE 40
#define XSAVE_XSTATE_BV 128
#define XSAVE_YMMH_SPACE 144
-#endif
static int kvm_put_xsave(CPUState *env)
{
-#ifdef KVM_CAP_XSAVE
int i, r;
struct kvm_xsave* xsave;
uint16_t cwd, swd, twd, fop;
@@ -788,14 +768,10 @@ static int kvm_put_xsave(CPUState *env)
r = kvm_vcpu_ioctl(env, KVM_SET_XSAVE, xsave);
qemu_free(xsave);
return r;
-#else
- return kvm_put_fpu(env);
-#endif
}
static int kvm_put_xcrs(CPUState *env)
{
-#ifdef KVM_CAP_XCRS
struct kvm_xcrs xcrs;
if (!kvm_has_xcrs()) {
@@ -807,9 +783,6 @@ static int kvm_put_xcrs(CPUState *env)
xcrs.xcrs[0].xcr = 0;
xcrs.xcrs[0].value = env->xcr0;
return kvm_vcpu_ioctl(env, KVM_SET_XCRS, &xcrs);
-#else
- return 0;
-#endif
}
static int kvm_put_sregs(CPUState *env)
@@ -918,7 +891,6 @@ static int kvm_put_msrs(CPUState *env, int level)
env->async_pf_en_msr);
}
}
-#ifdef KVM_CAP_MCE
if (env->mcg_cap) {
int i;
@@ -928,7 +900,6 @@ static int kvm_put_msrs(CPUState *env, int level)
kvm_msr_entry_set(&msrs[n++], MSR_MC0_CTL + i, env->mce_banks[i]);
}
}
-#endif
msr_data.info.nmsrs = n;
@@ -962,7 +933,6 @@ static int kvm_get_fpu(CPUState *env)
static int kvm_get_xsave(CPUState *env)
{
-#ifdef KVM_CAP_XSAVE
struct kvm_xsave* xsave;
int ret, i;
uint16_t cwd, swd, twd, fop;
@@ -998,14 +968,10 @@ static int kvm_get_xsave(CPUState *env)
sizeof env->ymmh_regs);
qemu_free(xsave);
return 0;
-#else
- return kvm_get_fpu(env);
-#endif
}
static int kvm_get_xcrs(CPUState *env)
{
-#ifdef KVM_CAP_XCRS
int i, ret;
struct kvm_xcrs xcrs;
@@ -1026,9 +992,6 @@ static int kvm_get_xcrs(CPUState *env)
}
}
return 0;
-#else
- return 0;
-#endif
}
static int kvm_get_sregs(CPUState *env)
@@ -1156,7 +1119,6 @@ static int kvm_get_msrs(CPUState *env)
msrs[n++].index = MSR_KVM_ASYNC_PF_EN;
}
-#ifdef KVM_CAP_MCE
if (env->mcg_cap) {
msrs[n++].index = MSR_MCG_STATUS;
msrs[n++].index = MSR_MCG_CTL;
@@ -1164,7 +1126,6 @@ static int kvm_get_msrs(CPUState *env)
msrs[n++].index = MSR_MC0_CTL + i;
}
}
-#endif
msr_data.info.nmsrs = n;
ret = kvm_vcpu_ioctl(env, KVM_GET_MSRS, &msr_data);
@@ -1215,21 +1176,17 @@ static int kvm_get_msrs(CPUState *env)
case MSR_KVM_WALL_CLOCK:
env->wall_clock_msr = msrs[i].data;
break;
-#ifdef KVM_CAP_MCE
case MSR_MCG_STATUS:
env->mcg_status = msrs[i].data;
break;
case MSR_MCG_CTL:
env->mcg_ctl = msrs[i].data;
break;
-#endif
default:
-#ifdef KVM_CAP_MCE
if (msrs[i].index >= MSR_MC0_CTL &&
msrs[i].index < MSR_MC0_CTL + (env->mcg_cap & 0xff) * 4) {
env->mce_banks[msrs[i].index - MSR_MC0_CTL] = msrs[i].data;
}
-#endif
break;
case MSR_KVM_ASYNC_PF_EN:
env->async_pf_en_msr = msrs[i].data;
@@ -1265,7 +1222,6 @@ static int kvm_get_mp_state(CPUState *env)
static int kvm_put_vcpu_events(CPUState *env, int level)
{
-#ifdef KVM_CAP_VCPU_EVENTS
struct kvm_vcpu_events events;
if (!kvm_has_vcpu_events()) {
@@ -1294,14 +1250,10 @@ static int kvm_put_vcpu_events(CPUState *env, int level)
}
return kvm_vcpu_ioctl(env, KVM_SET_VCPU_EVENTS, &events);
-#else
- return 0;
-#endif
}
static int kvm_get_vcpu_events(CPUState *env)
{
-#ifdef KVM_CAP_VCPU_EVENTS
struct kvm_vcpu_events events;
int ret;
@@ -1331,7 +1283,6 @@ static int kvm_get_vcpu_events(CPUState *env)
}
env->sipi_vector = events.sipi_vector;
-#endif
return 0;
}
@@ -1339,7 +1290,6 @@ static int kvm_get_vcpu_events(CPUState *env)
static int kvm_guest_debug_workarounds(CPUState *env)
{
int ret = 0;
-#ifdef KVM_CAP_SET_GUEST_DEBUG
unsigned long reinject_trap = 0;
if (!kvm_has_vcpu_events()) {
@@ -1363,13 +1313,11 @@ static int kvm_guest_debug_workarounds(CPUState *env)
(!kvm_has_robust_singlestep() && env->singlestep_enabled)) {
ret = kvm_update_guest_debug(env, reinject_trap);
}
-#endif /* KVM_CAP_SET_GUEST_DEBUG */
return ret;
}
static int kvm_put_debugregs(CPUState *env)
{
-#ifdef KVM_CAP_DEBUGREGS
struct kvm_debugregs dbgregs;
int i;
@@ -1385,14 +1333,10 @@ static int kvm_put_debugregs(CPUState *env)
dbgregs.flags = 0;
return kvm_vcpu_ioctl(env, KVM_SET_DEBUGREGS, &dbgregs);
-#else
- return 0;
-#endif
}
static int kvm_get_debugregs(CPUState *env)
{
-#ifdef KVM_CAP_DEBUGREGS
struct kvm_debugregs dbgregs;
int i, ret;
@@ -1409,7 +1353,6 @@ static int kvm_get_debugregs(CPUState *env)
}
env->dr[4] = env->dr[6] = dbgregs.dr6;
env->dr[5] = env->dr[7] = dbgregs.dr7;
-#endif
return 0;
}
@@ -1635,7 +1578,6 @@ static int kvm_handle_halt(CPUState *env)
return 0;
}
-#ifdef KVM_CAP_SET_GUEST_DEBUG
int kvm_arch_insert_sw_breakpoint(CPUState *env, struct kvm_sw_breakpoint *bp)
{
static const uint8_t int3 = 0xcc;
@@ -1816,7 +1758,6 @@ void kvm_arch_update_guest_debug(CPUState *env, struct kvm_guest_debug *dbg)
}
}
}
-#endif /* KVM_CAP_SET_GUEST_DEBUG */
static bool host_supports_vmx(void)
{
@@ -1863,12 +1804,10 @@ int kvm_arch_handle_exit(CPUState *env, struct kvm_run *run)
run->ex.exception, run->ex.error_code);
ret = -1;
break;
-#ifdef KVM_CAP_SET_GUEST_DEBUG
case KVM_EXIT_DEBUG:
DPRINTF("kvm_exit_debug\n");
ret = kvm_handle_debug(&run->debug.arch);
break;
-#endif /* KVM_CAP_SET_GUEST_DEBUG */
default:
fprintf(stderr, "KVM: unknown exit reason %d\n", run->exit_reason);
ret = -1;
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 09/12] kvm: ppc: Drop KVM_CAP build dependencies
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:11 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel, Alexander Graf
No longer needed with accompanied kernel headers.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
target-ppc/kvm.c | 14 --------------
1 files changed, 0 insertions(+), 14 deletions(-)
diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c
index 0500e3f..21f35af 100644
--- a/target-ppc/kvm.c
+++ b/target-ppc/kvm.c
@@ -65,18 +65,10 @@ static void kvm_kick_env(void *env)
int kvm_arch_init(KVMState *s)
{
-#ifdef KVM_CAP_PPC_UNSET_IRQ
cap_interrupt_unset = kvm_check_extension(s, KVM_CAP_PPC_UNSET_IRQ);
-#endif
-#ifdef KVM_CAP_PPC_IRQ_LEVEL
cap_interrupt_level = kvm_check_extension(s, KVM_CAP_PPC_IRQ_LEVEL);
-#endif
-#ifdef KVM_CAP_PPC_SEGSTATE
cap_segstate = kvm_check_extension(s, KVM_CAP_PPC_SEGSTATE);
-#endif
-#ifdef KVM_CAP_PPC_BOOKE_SREGS
cap_booke_sregs = kvm_check_extension(s, KVM_CAP_PPC_BOOKE_SREGS);
-#endif
if (!cap_interrupt_level) {
fprintf(stderr, "KVM: Couldn't find level irq capability. Expect the "
@@ -217,7 +209,6 @@ int kvm_arch_get_registers(CPUState *env)
return ret;
}
-#ifdef KVM_CAP_PPC_BOOKE_SREGS
if (sregs.u.e.features & KVM_SREGS_E_BASE) {
env->spr[SPR_BOOKE_CSRR0] = sregs.u.e.csrr0;
env->spr[SPR_BOOKE_CSRR1] = sregs.u.e.csrr1;
@@ -314,7 +305,6 @@ int kvm_arch_get_registers(CPUState *env)
env->spr[SPR_BOOKE_PID2] = sregs.u.e.impl.fsl.pid2;
}
}
-#endif
}
if (cap_segstate) {
@@ -323,7 +313,6 @@ int kvm_arch_get_registers(CPUState *env)
return ret;
}
-#ifdef KVM_CAP_PPC_SEGSTATE
ppc_store_sdr1(env, sregs.u.s.sdr1);
/* Sync SLB */
@@ -346,7 +335,6 @@ int kvm_arch_get_registers(CPUState *env)
env->IBAT[0][i] = sregs.u.s.ppc32.ibat[i] & 0xffffffff;
env->IBAT[1][i] = sregs.u.s.ppc32.ibat[i] >> 32;
}
-#endif
}
return 0;
@@ -525,7 +513,6 @@ int kvmppc_get_hypercall(CPUState *env, uint8_t *buf, int buf_len)
{
uint32_t *hc = (uint32_t*)buf;
-#ifdef KVM_CAP_PPC_GET_PVINFO
struct kvm_ppc_pvinfo pvinfo;
if (kvm_check_extension(env->kvm_state, KVM_CAP_PPC_GET_PVINFO) &&
@@ -534,7 +521,6 @@ int kvmppc_get_hypercall(CPUState *env, uint8_t *buf, int buf_len)
return 0;
}
-#endif
/*
* Fallback to always fail hypercalls:
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 09/12] kvm: ppc: Drop KVM_CAP build dependencies
@ 2011-06-08 14:11 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm, Alexander Graf
No longer needed with accompanied kernel headers.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
target-ppc/kvm.c | 14 --------------
1 files changed, 0 insertions(+), 14 deletions(-)
diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c
index 0500e3f..21f35af 100644
--- a/target-ppc/kvm.c
+++ b/target-ppc/kvm.c
@@ -65,18 +65,10 @@ static void kvm_kick_env(void *env)
int kvm_arch_init(KVMState *s)
{
-#ifdef KVM_CAP_PPC_UNSET_IRQ
cap_interrupt_unset = kvm_check_extension(s, KVM_CAP_PPC_UNSET_IRQ);
-#endif
-#ifdef KVM_CAP_PPC_IRQ_LEVEL
cap_interrupt_level = kvm_check_extension(s, KVM_CAP_PPC_IRQ_LEVEL);
-#endif
-#ifdef KVM_CAP_PPC_SEGSTATE
cap_segstate = kvm_check_extension(s, KVM_CAP_PPC_SEGSTATE);
-#endif
-#ifdef KVM_CAP_PPC_BOOKE_SREGS
cap_booke_sregs = kvm_check_extension(s, KVM_CAP_PPC_BOOKE_SREGS);
-#endif
if (!cap_interrupt_level) {
fprintf(stderr, "KVM: Couldn't find level irq capability. Expect the "
@@ -217,7 +209,6 @@ int kvm_arch_get_registers(CPUState *env)
return ret;
}
-#ifdef KVM_CAP_PPC_BOOKE_SREGS
if (sregs.u.e.features & KVM_SREGS_E_BASE) {
env->spr[SPR_BOOKE_CSRR0] = sregs.u.e.csrr0;
env->spr[SPR_BOOKE_CSRR1] = sregs.u.e.csrr1;
@@ -314,7 +305,6 @@ int kvm_arch_get_registers(CPUState *env)
env->spr[SPR_BOOKE_PID2] = sregs.u.e.impl.fsl.pid2;
}
}
-#endif
}
if (cap_segstate) {
@@ -323,7 +313,6 @@ int kvm_arch_get_registers(CPUState *env)
return ret;
}
-#ifdef KVM_CAP_PPC_SEGSTATE
ppc_store_sdr1(env, sregs.u.s.sdr1);
/* Sync SLB */
@@ -346,7 +335,6 @@ int kvm_arch_get_registers(CPUState *env)
env->IBAT[0][i] = sregs.u.s.ppc32.ibat[i] & 0xffffffff;
env->IBAT[1][i] = sregs.u.s.ppc32.ibat[i] >> 32;
}
-#endif
}
return 0;
@@ -525,7 +513,6 @@ int kvmppc_get_hypercall(CPUState *env, uint8_t *buf, int buf_len)
{
uint32_t *hc = (uint32_t*)buf;
-#ifdef KVM_CAP_PPC_GET_PVINFO
struct kvm_ppc_pvinfo pvinfo;
if (kvm_check_extension(env->kvm_state, KVM_CAP_PPC_GET_PVINFO) &&
@@ -534,7 +521,6 @@ int kvmppc_get_hypercall(CPUState *env, uint8_t *buf, int buf_len)
return 0;
}
-#endif
/*
* Fallback to always fail hypercalls:
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 09/12] kvm: ppc: Drop KVM_CAP build dependencies
2011-06-08 14:11 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-10 18:32 ` Eduardo Habkost
-1 siblings, 0 replies; 90+ messages in thread
From: Eduardo Habkost @ 2011-06-10 18:32 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Avi Kivity, Marcelo Tosatti, qemu-devel, kvm, Alexander Graf
On Wed, Jun 08, 2011 at 04:11:03PM +0200, Jan Kiszka wrote:
<snip>
> @@ -217,7 +209,6 @@ int kvm_arch_get_registers(CPUState *env)
> return ret;
> }
>
> -#ifdef KVM_CAP_PPC_BOOKE_SREGS
> if (sregs.u.e.features & KVM_SREGS_E_BASE) {
> env->spr[SPR_BOOKE_CSRR0] = sregs.u.e.csrr0;
> env->spr[SPR_BOOKE_CSRR1] = sregs.u.e.csrr1;
Which tree/commit-id did you use as base for this series? This chunk
doesn't apply on uq/master (patch 11/12, on the other hand, doesn't
apply against qemu.git/master, only uq/master).
After some patch hunting, I found out that the series apply cleanly if I
apply it against a manual merge of uq/master and qemu.git/master, but
maybe there is a branch that already had all the dependencies, that I
didn't know about?
--
Eduardo
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 09/12] kvm: ppc: Drop KVM_CAP build dependencies
@ 2011-06-10 18:32 ` Eduardo Habkost
0 siblings, 0 replies; 90+ messages in thread
From: Eduardo Habkost @ 2011-06-10 18:32 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Alexander Graf, Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On Wed, Jun 08, 2011 at 04:11:03PM +0200, Jan Kiszka wrote:
<snip>
> @@ -217,7 +209,6 @@ int kvm_arch_get_registers(CPUState *env)
> return ret;
> }
>
> -#ifdef KVM_CAP_PPC_BOOKE_SREGS
> if (sregs.u.e.features & KVM_SREGS_E_BASE) {
> env->spr[SPR_BOOKE_CSRR0] = sregs.u.e.csrr0;
> env->spr[SPR_BOOKE_CSRR1] = sregs.u.e.csrr1;
Which tree/commit-id did you use as base for this series? This chunk
doesn't apply on uq/master (patch 11/12, on the other hand, doesn't
apply against qemu.git/master, only uq/master).
After some patch hunting, I found out that the series apply cleanly if I
apply it against a manual merge of uq/master and qemu.git/master, but
maybe there is a branch that already had all the dependencies, that I
didn't know about?
--
Eduardo
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [PATCH 09/12] kvm: ppc: Drop KVM_CAP build dependencies
2011-06-10 18:32 ` Eduardo Habkost
@ 2011-06-11 7:45 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-11 7:45 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti, qemu-devel, kvm, Alexander Graf
[-- Attachment #1: Type: text/plain, Size: 1043 bytes --]
On 2011-06-10 20:32, Eduardo Habkost wrote:
> On Wed, Jun 08, 2011 at 04:11:03PM +0200, Jan Kiszka wrote:
> <snip>
>> @@ -217,7 +209,6 @@ int kvm_arch_get_registers(CPUState *env)
>> return ret;
>> }
>>
>> -#ifdef KVM_CAP_PPC_BOOKE_SREGS
>> if (sregs.u.e.features & KVM_SREGS_E_BASE) {
>> env->spr[SPR_BOOKE_CSRR0] = sregs.u.e.csrr0;
>> env->spr[SPR_BOOKE_CSRR1] = sregs.u.e.csrr1;
>
> Which tree/commit-id did you use as base for this series? This chunk
> doesn't apply on uq/master (patch 11/12, on the other hand, doesn't
> apply against qemu.git/master, only uq/master).
>
> After some patch hunting, I found out that the series apply cleanly if I
> apply it against a manual merge of uq/master and qemu.git/master, but
> maybe there is a branch that already had all the dependencies, that I
> didn't know about?
As I wrote in the introduction, the series requires a trivial rebase of
uq/master over current qemu master (because of this patch).
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]
^ permalink raw reply [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 09/12] kvm: ppc: Drop KVM_CAP build dependencies
@ 2011-06-11 7:45 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-11 7:45 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti, qemu-devel, kvm, Alexander Graf
[-- Attachment #1: Type: text/plain, Size: 1043 bytes --]
On 2011-06-10 20:32, Eduardo Habkost wrote:
> On Wed, Jun 08, 2011 at 04:11:03PM +0200, Jan Kiszka wrote:
> <snip>
>> @@ -217,7 +209,6 @@ int kvm_arch_get_registers(CPUState *env)
>> return ret;
>> }
>>
>> -#ifdef KVM_CAP_PPC_BOOKE_SREGS
>> if (sregs.u.e.features & KVM_SREGS_E_BASE) {
>> env->spr[SPR_BOOKE_CSRR0] = sregs.u.e.csrr0;
>> env->spr[SPR_BOOKE_CSRR1] = sregs.u.e.csrr1;
>
> Which tree/commit-id did you use as base for this series? This chunk
> doesn't apply on uq/master (patch 11/12, on the other hand, doesn't
> apply against qemu.git/master, only uq/master).
>
> After some patch hunting, I found out that the series apply cleanly if I
> apply it against a manual merge of uq/master and qemu.git/master, but
> maybe there is a branch that already had all the dependencies, that I
> didn't know about?
As I wrote in the introduction, the series requires a trivial rebase of
uq/master over current qemu master (because of this patch).
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [PATCH 09/12] kvm: ppc: Drop KVM_CAP build dependencies
2011-06-08 14:11 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-14 11:07 ` Alexander Graf
-1 siblings, 0 replies; 90+ messages in thread
From: Alexander Graf @ 2011-06-14 11:07 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Avi Kivity, Marcelo Tosatti, kvm, qemu-devel
On 08.06.2011, at 16:11, Jan Kiszka wrote:
> No longer needed with accompanied kernel headers.
What a nice code cleanup.
Reviewed-by: Alexander Graf <agraf@suse.de>
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 10/12] kvm: Clean up stubs
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:11 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel
No one references kvm_check_extension, kvm_has_vcpu_events, and
kvm_has_robust_singlestep outside KVM code.
kvm_update_guest_debug is never called, thus has no job besides
returning an error.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
kvm-stub.c | 18 +-----------------
1 files changed, 1 insertions(+), 17 deletions(-)
diff --git a/kvm-stub.c b/kvm-stub.c
index 1c95452..1e835c6 100644
--- a/kvm-stub.c
+++ b/kvm-stub.c
@@ -42,11 +42,6 @@ int kvm_uncoalesce_mmio_region(target_phys_addr_t start, ram_addr_t size)
return -ENOSYS;
}
-int kvm_check_extension(KVMState *s, unsigned int extension)
-{
- return 0;
-}
-
int kvm_init(void)
{
return -ENOSYS;
@@ -78,16 +73,6 @@ int kvm_has_sync_mmu(void)
return 0;
}
-int kvm_has_vcpu_events(void)
-{
- return 0;
-}
-
-int kvm_has_robust_singlestep(void)
-{
- return 0;
-}
-
int kvm_has_many_ioeventfds(void)
{
return 0;
@@ -99,8 +84,7 @@ void kvm_setup_guest_memory(void *start, size_t size)
int kvm_update_guest_debug(CPUState *env, unsigned long reinject_trap)
{
- tb_flush(env);
- return 0;
+ return -ENOSYS;
}
int kvm_insert_breakpoint(CPUState *current_env, target_ulong addr,
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 10/12] kvm: Clean up stubs
@ 2011-06-08 14:11 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm
No one references kvm_check_extension, kvm_has_vcpu_events, and
kvm_has_robust_singlestep outside KVM code.
kvm_update_guest_debug is never called, thus has no job besides
returning an error.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
kvm-stub.c | 18 +-----------------
1 files changed, 1 insertions(+), 17 deletions(-)
diff --git a/kvm-stub.c b/kvm-stub.c
index 1c95452..1e835c6 100644
--- a/kvm-stub.c
+++ b/kvm-stub.c
@@ -42,11 +42,6 @@ int kvm_uncoalesce_mmio_region(target_phys_addr_t start, ram_addr_t size)
return -ENOSYS;
}
-int kvm_check_extension(KVMState *s, unsigned int extension)
-{
- return 0;
-}
-
int kvm_init(void)
{
return -ENOSYS;
@@ -78,16 +73,6 @@ int kvm_has_sync_mmu(void)
return 0;
}
-int kvm_has_vcpu_events(void)
-{
- return 0;
-}
-
-int kvm_has_robust_singlestep(void)
-{
- return 0;
-}
-
int kvm_has_many_ioeventfds(void)
{
return 0;
@@ -99,8 +84,7 @@ void kvm_setup_guest_memory(void *start, size_t size)
int kvm_update_guest_debug(CPUState *env, unsigned long reinject_trap)
{
- tb_flush(env);
- return 0;
+ return -ENOSYS;
}
int kvm_insert_breakpoint(CPUState *current_env, target_ulong addr,
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 11/12] kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:11 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel, Eduardo Habkost
kvm_arch_get_supported_cpuid checks for global cpuid restrictions, it
does not require any CPUState reference. Changing its interface allows
to call it before any VCPU is initialized.
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
kvm.h | 2 +-
target-i386/cpuid.c | 20 ++++++++++++--------
target-i386/kvm.c | 30 +++++++++++++++---------------
3 files changed, 28 insertions(+), 24 deletions(-)
diff --git a/kvm.h b/kvm.h
index d565dba..243b063 100644
--- a/kvm.h
+++ b/kvm.h
@@ -157,7 +157,7 @@ bool kvm_arch_stop_on_emulation_error(CPUState *env);
int kvm_check_extension(KVMState *s, unsigned int extension);
-uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
+uint32_t kvm_arch_get_supported_cpuid(KVMState *env, uint32_t function,
uint32_t index, int reg);
void kvm_cpu_synchronize_state(CPUState *env);
void kvm_cpu_synchronize_post_reset(CPUState *env);
diff --git a/target-i386/cpuid.c b/target-i386/cpuid.c
index 79e7580..e1ae3af 100644
--- a/target-i386/cpuid.c
+++ b/target-i386/cpuid.c
@@ -1144,10 +1144,12 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
break;
case 7:
if (kvm_enabled()) {
- *eax = kvm_arch_get_supported_cpuid(env, 0x7, count, R_EAX);
- *ebx = kvm_arch_get_supported_cpuid(env, 0x7, count, R_EBX);
- *ecx = kvm_arch_get_supported_cpuid(env, 0x7, count, R_ECX);
- *edx = kvm_arch_get_supported_cpuid(env, 0x7, count, R_EDX);
+ KVMState *s = env->kvm_state;
+
+ *eax = kvm_arch_get_supported_cpuid(s, 0x7, count, R_EAX);
+ *ebx = kvm_arch_get_supported_cpuid(s, 0x7, count, R_EBX);
+ *ecx = kvm_arch_get_supported_cpuid(s, 0x7, count, R_ECX);
+ *edx = kvm_arch_get_supported_cpuid(s, 0x7, count, R_EDX);
} else {
*eax = 0;
*ebx = 0;
@@ -1179,10 +1181,12 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
break;
}
if (kvm_enabled()) {
- *eax = kvm_arch_get_supported_cpuid(env, 0xd, count, R_EAX);
- *ebx = kvm_arch_get_supported_cpuid(env, 0xd, count, R_EBX);
- *ecx = kvm_arch_get_supported_cpuid(env, 0xd, count, R_ECX);
- *edx = kvm_arch_get_supported_cpuid(env, 0xd, count, R_EDX);
+ KVMState *s = env->kvm_state;
+
+ *eax = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EAX);
+ *ebx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EBX);
+ *ecx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_ECX);
+ *edx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EDX);
} else {
*eax = 0;
*ebx = 0;
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 1c2d32c..5ebb054 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -98,12 +98,12 @@ struct kvm_para_features {
{ -1, -1 }
};
-static int get_para_features(CPUState *env)
+static int get_para_features(KVMState *s)
{
int i, features = 0;
for (i = 0; i < ARRAY_SIZE(para_features) - 1; i++) {
- if (kvm_check_extension(env->kvm_state, para_features[i].cap)) {
+ if (kvm_check_extension(s, para_features[i].cap)) {
features |= (1 << para_features[i].feature);
}
}
@@ -112,7 +112,7 @@ static int get_para_features(CPUState *env)
}
-uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
+uint32_t kvm_arch_get_supported_cpuid(KVMState *s, uint32_t function,
uint32_t index, int reg)
{
struct kvm_cpuid2 *cpuid;
@@ -122,7 +122,7 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
int has_kvm_features = 0;
max = 1;
- while ((cpuid = try_get_cpuid(env->kvm_state, max)) == NULL) {
+ while ((cpuid = try_get_cpuid(s, max)) == NULL) {
max *= 2;
}
@@ -153,7 +153,7 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
/* On Intel, kvm returns cpuid according to the Intel spec,
* so add missing bits according to the AMD spec:
*/
- cpuid_1_edx = kvm_arch_get_supported_cpuid(env, 1, 0, R_EDX);
+ cpuid_1_edx = kvm_arch_get_supported_cpuid(s, 1, 0, R_EDX);
ret |= cpuid_1_edx & 0x183f7ff;
break;
}
@@ -166,7 +166,7 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
/* fallback for older kernels */
if (!has_kvm_features && (function == KVM_CPUID_FEATURES)) {
- ret = get_para_features(env);
+ ret = get_para_features(s);
}
return ret;
@@ -349,25 +349,25 @@ int kvm_arch_init_vcpu(CPUState *env)
struct kvm_cpuid2 cpuid;
struct kvm_cpuid_entry2 entries[100];
} __attribute__((packed)) cpuid_data;
+ KVMState *s = env->kvm_state;
uint32_t limit, i, j, cpuid_i;
uint32_t unused;
struct kvm_cpuid_entry2 *c;
uint32_t signature[3];
- env->cpuid_features &= kvm_arch_get_supported_cpuid(env, 1, 0, R_EDX);
+ env->cpuid_features &= kvm_arch_get_supported_cpuid(s, 1, 0, R_EDX);
i = env->cpuid_ext_features & CPUID_EXT_HYPERVISOR;
- env->cpuid_ext_features &= kvm_arch_get_supported_cpuid(env, 1, 0, R_ECX);
+ env->cpuid_ext_features &= kvm_arch_get_supported_cpuid(s, 1, 0, R_ECX);
env->cpuid_ext_features |= i;
- env->cpuid_ext2_features &= kvm_arch_get_supported_cpuid(env, 0x80000001,
+ env->cpuid_ext2_features &= kvm_arch_get_supported_cpuid(s, 0x80000001,
0, R_EDX);
- env->cpuid_ext3_features &= kvm_arch_get_supported_cpuid(env, 0x80000001,
+ env->cpuid_ext3_features &= kvm_arch_get_supported_cpuid(s, 0x80000001,
0, R_ECX);
- env->cpuid_svm_features &= kvm_arch_get_supported_cpuid(env, 0x8000000A,
+ env->cpuid_svm_features &= kvm_arch_get_supported_cpuid(s, 0x8000000A,
0, R_EDX);
-
cpuid_i = 0;
/* Paravirtualization CPUIDs */
@@ -383,8 +383,8 @@ int kvm_arch_init_vcpu(CPUState *env)
c = &cpuid_data.entries[cpuid_i++];
memset(c, 0, sizeof(*c));
c->function = KVM_CPUID_FEATURES;
- c->eax = env->cpuid_kvm_features & kvm_arch_get_supported_cpuid(env,
- KVM_CPUID_FEATURES, 0, R_EAX);
+ c->eax = env->cpuid_kvm_features &
+ kvm_arch_get_supported_cpuid(s, KVM_CPUID_FEATURES, 0, R_EAX);
has_msr_async_pf_en = c->eax & (1 << KVM_FEATURE_ASYNC_PF);
@@ -453,7 +453,7 @@ int kvm_arch_init_vcpu(CPUState *env)
/* Call Centaur's CPUID instructions they are supported. */
if (env->cpuid_xlevel2 > 0) {
env->cpuid_ext4_features &=
- kvm_arch_get_supported_cpuid(env, 0xC0000001, 0, R_EDX);
+ kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX);
cpu_x86_cpuid(env, 0xC0000000, 0, &limit, &unused, &unused, &unused);
for (i = 0xC0000000; i <= limit; i++) {
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* [Qemu-devel] [PATCH 11/12] kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
@ 2011-06-08 14:11 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm, Eduardo Habkost
kvm_arch_get_supported_cpuid checks for global cpuid restrictions, it
does not require any CPUState reference. Changing its interface allows
to call it before any VCPU is initialized.
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
kvm.h | 2 +-
target-i386/cpuid.c | 20 ++++++++++++--------
target-i386/kvm.c | 30 +++++++++++++++---------------
3 files changed, 28 insertions(+), 24 deletions(-)
diff --git a/kvm.h b/kvm.h
index d565dba..243b063 100644
--- a/kvm.h
+++ b/kvm.h
@@ -157,7 +157,7 @@ bool kvm_arch_stop_on_emulation_error(CPUState *env);
int kvm_check_extension(KVMState *s, unsigned int extension);
-uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
+uint32_t kvm_arch_get_supported_cpuid(KVMState *env, uint32_t function,
uint32_t index, int reg);
void kvm_cpu_synchronize_state(CPUState *env);
void kvm_cpu_synchronize_post_reset(CPUState *env);
diff --git a/target-i386/cpuid.c b/target-i386/cpuid.c
index 79e7580..e1ae3af 100644
--- a/target-i386/cpuid.c
+++ b/target-i386/cpuid.c
@@ -1144,10 +1144,12 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
break;
case 7:
if (kvm_enabled()) {
- *eax = kvm_arch_get_supported_cpuid(env, 0x7, count, R_EAX);
- *ebx = kvm_arch_get_supported_cpuid(env, 0x7, count, R_EBX);
- *ecx = kvm_arch_get_supported_cpuid(env, 0x7, count, R_ECX);
- *edx = kvm_arch_get_supported_cpuid(env, 0x7, count, R_EDX);
+ KVMState *s = env->kvm_state;
+
+ *eax = kvm_arch_get_supported_cpuid(s, 0x7, count, R_EAX);
+ *ebx = kvm_arch_get_supported_cpuid(s, 0x7, count, R_EBX);
+ *ecx = kvm_arch_get_supported_cpuid(s, 0x7, count, R_ECX);
+ *edx = kvm_arch_get_supported_cpuid(s, 0x7, count, R_EDX);
} else {
*eax = 0;
*ebx = 0;
@@ -1179,10 +1181,12 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
break;
}
if (kvm_enabled()) {
- *eax = kvm_arch_get_supported_cpuid(env, 0xd, count, R_EAX);
- *ebx = kvm_arch_get_supported_cpuid(env, 0xd, count, R_EBX);
- *ecx = kvm_arch_get_supported_cpuid(env, 0xd, count, R_ECX);
- *edx = kvm_arch_get_supported_cpuid(env, 0xd, count, R_EDX);
+ KVMState *s = env->kvm_state;
+
+ *eax = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EAX);
+ *ebx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EBX);
+ *ecx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_ECX);
+ *edx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EDX);
} else {
*eax = 0;
*ebx = 0;
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 1c2d32c..5ebb054 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -98,12 +98,12 @@ struct kvm_para_features {
{ -1, -1 }
};
-static int get_para_features(CPUState *env)
+static int get_para_features(KVMState *s)
{
int i, features = 0;
for (i = 0; i < ARRAY_SIZE(para_features) - 1; i++) {
- if (kvm_check_extension(env->kvm_state, para_features[i].cap)) {
+ if (kvm_check_extension(s, para_features[i].cap)) {
features |= (1 << para_features[i].feature);
}
}
@@ -112,7 +112,7 @@ static int get_para_features(CPUState *env)
}
-uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
+uint32_t kvm_arch_get_supported_cpuid(KVMState *s, uint32_t function,
uint32_t index, int reg)
{
struct kvm_cpuid2 *cpuid;
@@ -122,7 +122,7 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
int has_kvm_features = 0;
max = 1;
- while ((cpuid = try_get_cpuid(env->kvm_state, max)) == NULL) {
+ while ((cpuid = try_get_cpuid(s, max)) == NULL) {
max *= 2;
}
@@ -153,7 +153,7 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
/* On Intel, kvm returns cpuid according to the Intel spec,
* so add missing bits according to the AMD spec:
*/
- cpuid_1_edx = kvm_arch_get_supported_cpuid(env, 1, 0, R_EDX);
+ cpuid_1_edx = kvm_arch_get_supported_cpuid(s, 1, 0, R_EDX);
ret |= cpuid_1_edx & 0x183f7ff;
break;
}
@@ -166,7 +166,7 @@ uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function,
/* fallback for older kernels */
if (!has_kvm_features && (function == KVM_CPUID_FEATURES)) {
- ret = get_para_features(env);
+ ret = get_para_features(s);
}
return ret;
@@ -349,25 +349,25 @@ int kvm_arch_init_vcpu(CPUState *env)
struct kvm_cpuid2 cpuid;
struct kvm_cpuid_entry2 entries[100];
} __attribute__((packed)) cpuid_data;
+ KVMState *s = env->kvm_state;
uint32_t limit, i, j, cpuid_i;
uint32_t unused;
struct kvm_cpuid_entry2 *c;
uint32_t signature[3];
- env->cpuid_features &= kvm_arch_get_supported_cpuid(env, 1, 0, R_EDX);
+ env->cpuid_features &= kvm_arch_get_supported_cpuid(s, 1, 0, R_EDX);
i = env->cpuid_ext_features & CPUID_EXT_HYPERVISOR;
- env->cpuid_ext_features &= kvm_arch_get_supported_cpuid(env, 1, 0, R_ECX);
+ env->cpuid_ext_features &= kvm_arch_get_supported_cpuid(s, 1, 0, R_ECX);
env->cpuid_ext_features |= i;
- env->cpuid_ext2_features &= kvm_arch_get_supported_cpuid(env, 0x80000001,
+ env->cpuid_ext2_features &= kvm_arch_get_supported_cpuid(s, 0x80000001,
0, R_EDX);
- env->cpuid_ext3_features &= kvm_arch_get_supported_cpuid(env, 0x80000001,
+ env->cpuid_ext3_features &= kvm_arch_get_supported_cpuid(s, 0x80000001,
0, R_ECX);
- env->cpuid_svm_features &= kvm_arch_get_supported_cpuid(env, 0x8000000A,
+ env->cpuid_svm_features &= kvm_arch_get_supported_cpuid(s, 0x8000000A,
0, R_EDX);
-
cpuid_i = 0;
/* Paravirtualization CPUIDs */
@@ -383,8 +383,8 @@ int kvm_arch_init_vcpu(CPUState *env)
c = &cpuid_data.entries[cpuid_i++];
memset(c, 0, sizeof(*c));
c->function = KVM_CPUID_FEATURES;
- c->eax = env->cpuid_kvm_features & kvm_arch_get_supported_cpuid(env,
- KVM_CPUID_FEATURES, 0, R_EAX);
+ c->eax = env->cpuid_kvm_features &
+ kvm_arch_get_supported_cpuid(s, KVM_CPUID_FEATURES, 0, R_EAX);
has_msr_async_pf_en = c->eax & (1 << KVM_FEATURE_ASYNC_PF);
@@ -453,7 +453,7 @@ int kvm_arch_init_vcpu(CPUState *env)
/* Call Centaur's CPUID instructions they are supported. */
if (env->cpuid_xlevel2 > 0) {
env->cpuid_ext4_features &=
- kvm_arch_get_supported_cpuid(env, 0xC0000001, 0, R_EDX);
+ kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX);
cpu_x86_cpuid(env, 0xC0000000, 0, &limit, &unused, &unused, &unused);
for (i = 0xC0000000; i <= limit; i++) {
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread* Re: [Qemu-devel] [PATCH 11/12] kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
2011-06-08 14:11 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-09 17:33 ` Eduardo Habkost
-1 siblings, 0 replies; 90+ messages in thread
From: Eduardo Habkost @ 2011-06-09 17:33 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Avi Kivity, Marcelo Tosatti, qemu-devel, kvm
On Wed, Jun 08, 2011 at 04:11:05PM +0200, Jan Kiszka wrote:
> kvm_arch_get_supported_cpuid checks for global cpuid restrictions, it
> does not require any CPUState reference. Changing its interface allows
> to call it before any VCPU is initialized.
I'm wondering if it wouldn't be simpler to keep the existing interface
but just initialize CPUState->kvm_state earlier (today it is initialized
only on kvm_init_vcpu(), although the kvm_state global is initialized
much earlier).
Even with this new KVMState-based interface, code that needs to use
these functions before kvm_init_vcpu() (e.g.
check_features_against_host()) will have to use the 'kvm_state' global
(and I would like to avoid that).
--
Eduardo
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 11/12] kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
@ 2011-06-09 17:33 ` Eduardo Habkost
0 siblings, 0 replies; 90+ messages in thread
From: Eduardo Habkost @ 2011-06-09 17:33 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On Wed, Jun 08, 2011 at 04:11:05PM +0200, Jan Kiszka wrote:
> kvm_arch_get_supported_cpuid checks for global cpuid restrictions, it
> does not require any CPUState reference. Changing its interface allows
> to call it before any VCPU is initialized.
I'm wondering if it wouldn't be simpler to keep the existing interface
but just initialize CPUState->kvm_state earlier (today it is initialized
only on kvm_init_vcpu(), although the kvm_state global is initialized
much earlier).
Even with this new KVMState-based interface, code that needs to use
these functions before kvm_init_vcpu() (e.g.
check_features_against_host()) will have to use the 'kvm_state' global
(and I would like to avoid that).
--
Eduardo
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 11/12] kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
2011-06-09 17:33 ` Eduardo Habkost
(?)
@ 2011-06-09 17:41 ` Jan Kiszka
2011-06-09 18:08 ` Eduardo Habkost
-1 siblings, 1 reply; 90+ messages in thread
From: Jan Kiszka @ 2011-06-09 17:41 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti, qemu-devel, kvm
On 2011-06-09 19:33, Eduardo Habkost wrote:
> On Wed, Jun 08, 2011 at 04:11:05PM +0200, Jan Kiszka wrote:
>> kvm_arch_get_supported_cpuid checks for global cpuid restrictions, it
>> does not require any CPUState reference. Changing its interface allows
>> to call it before any VCPU is initialized.
>
> I'm wondering if it wouldn't be simpler to keep the existing interface
> but just initialize CPUState->kvm_state earlier (today it is initialized
> only on kvm_init_vcpu(), although the kvm_state global is initialized
> much earlier).
If there was more need for a slit up, I would agree. But I do not see it.
>
> Even with this new KVMState-based interface, code that needs to use
> these functions before kvm_init_vcpu() (e.g.
> check_features_against_host()) will have to use the 'kvm_state' global
> (and I would like to avoid that).
That is a different topic that needs to be resolved for other use cases
as well (e.g. for kvm devices). In many cases you should be able to find
a way to pass kvm_state from functions that already holds a reference.
Is that not true for your use case?
Jan
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 11/12] kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
2011-06-09 17:41 ` Jan Kiszka
@ 2011-06-09 18:08 ` Eduardo Habkost
0 siblings, 0 replies; 90+ messages in thread
From: Eduardo Habkost @ 2011-06-09 18:08 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Avi Kivity, Marcelo Tosatti, qemu-devel, kvm
On Thu, Jun 09, 2011 at 07:41:03PM +0200, Jan Kiszka wrote:
<snip>
> > I'm wondering if it wouldn't be simpler to keep the existing interface
> > but just initialize CPUState->kvm_state earlier (today it is initialized
> > only on kvm_init_vcpu(), although the kvm_state global is initialized
> > much earlier).
>
> If there was more need for a slit up, I would agree. But I do not see it.
I guess it won't hurt to make the functions require only what they
really need.
> >
> > Even with this new KVMState-based interface, code that needs to use
> > these functions before kvm_init_vcpu() (e.g.
> > check_features_against_host()) will have to use the 'kvm_state' global
> > (and I would like to avoid that).
>
> That is a different topic that needs to be resolved for other use cases
> as well (e.g. for kvm devices). In many cases you should be able to find
> a way to pass kvm_state from functions that already holds a reference.
> Is that not true for your use case?
My use case is cpu_x86_register()/check_features_against_host(), that
hold only a CPUState reference, and I wouldn't like to add a new
reference to the kvm_state global variable there.
--
Eduardo
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 11/12] kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
@ 2011-06-09 18:08 ` Eduardo Habkost
0 siblings, 0 replies; 90+ messages in thread
From: Eduardo Habkost @ 2011-06-09 18:08 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Marcelo Tosatti, Avi Kivity, kvm, qemu-devel
On Thu, Jun 09, 2011 at 07:41:03PM +0200, Jan Kiszka wrote:
<snip>
> > I'm wondering if it wouldn't be simpler to keep the existing interface
> > but just initialize CPUState->kvm_state earlier (today it is initialized
> > only on kvm_init_vcpu(), although the kvm_state global is initialized
> > much earlier).
>
> If there was more need for a slit up, I would agree. But I do not see it.
I guess it won't hurt to make the functions require only what they
really need.
> >
> > Even with this new KVMState-based interface, code that needs to use
> > these functions before kvm_init_vcpu() (e.g.
> > check_features_against_host()) will have to use the 'kvm_state' global
> > (and I would like to avoid that).
>
> That is a different topic that needs to be resolved for other use cases
> as well (e.g. for kvm devices). In many cases you should be able to find
> a way to pass kvm_state from functions that already holds a reference.
> Is that not true for your use case?
My use case is cpu_x86_register()/check_features_against_host(), that
hold only a CPUState reference, and I wouldn't like to add a new
reference to the kvm_state global variable there.
--
Eduardo
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 11/12] kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
2011-06-09 18:08 ` Eduardo Habkost
(?)
@ 2011-06-09 19:53 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-09 19:53 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti, qemu-devel, kvm
[-- Attachment #1: Type: text/plain, Size: 1564 bytes --]
On 2011-06-09 20:08, Eduardo Habkost wrote:
> On Thu, Jun 09, 2011 at 07:41:03PM +0200, Jan Kiszka wrote:
> <snip>
>>> I'm wondering if it wouldn't be simpler to keep the existing interface
>>> but just initialize CPUState->kvm_state earlier (today it is initialized
>>> only on kvm_init_vcpu(), although the kvm_state global is initialized
>>> much earlier).
>>
>> If there was more need for a slit up, I would agree. But I do not see it.
>
> I guess it won't hurt to make the functions require only what they
> really need.
Yes, so this patch has an independent value IMO.
>
>>>
>>> Even with this new KVMState-based interface, code that needs to use
>>> these functions before kvm_init_vcpu() (e.g.
>>> check_features_against_host()) will have to use the 'kvm_state' global
>>> (and I would like to avoid that).
>>
>> That is a different topic that needs to be resolved for other use cases
>> as well (e.g. for kvm devices). In many cases you should be able to find
>> a way to pass kvm_state from functions that already holds a reference.
>> Is that not true for your use case?
>
> My use case is cpu_x86_register()/check_features_against_host(), that
> hold only a CPUState reference, and I wouldn't like to add a new
> reference to the kvm_state global variable there.
For me, this is like requiring kvm_state for kvm_check_extension, and I
wouldn't hesitate using the global state until we solved that in a
better way. But if you feel like it's not appropriate here, then let's
go for early/late vcpu init.
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 12/12] Remove unneeded kvm.h from cpu-exec.c
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-08 14:11 ` Jan Kiszka
-1 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, qemu-devel
This was obsoleted by 6792a57bf1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
cpu-exec.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/cpu-exec.c b/cpu-exec.c
index 6ddd8dd..9bb6405 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -20,7 +20,6 @@
#include "exec.h"
#include "disas.h"
#include "tcg.h"
-#include "kvm.h"
#include "qemu-barrier.h"
#if defined(__sparc__) && !defined(CONFIG_SOLARIS)
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [Qemu-devel] [PATCH 12/12] Remove unneeded kvm.h from cpu-exec.c
@ 2011-06-08 14:11 ` Jan Kiszka
0 siblings, 0 replies; 90+ messages in thread
From: Jan Kiszka @ 2011-06-08 14:11 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: qemu-devel, kvm
This was obsoleted by 6792a57bf1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
cpu-exec.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/cpu-exec.c b/cpu-exec.c
index 6ddd8dd..9bb6405 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -20,7 +20,6 @@
#include "exec.h"
#include "disas.h"
#include "tcg.h"
-#include "kvm.h"
#include "qemu-barrier.h"
#if defined(__sparc__) && !defined(CONFIG_SOLARIS)
--
1.7.1
^ permalink raw reply related [flat|nested] 90+ messages in thread
* Re: [PATCH 00/12] [uq/master] Import linux headers and some cleanups
2011-06-08 14:10 ` [Qemu-devel] " Jan Kiszka
@ 2011-06-20 18:24 ` Marcelo Tosatti
-1 siblings, 0 replies; 90+ messages in thread
From: Marcelo Tosatti @ 2011-06-20 18:24 UTC (permalink / raw)
To: Jan Kiszka
Cc: Avi Kivity, kvm, qemu-devel, Alexander Graf, Andreas Färber,
Christoph Hellwig, Eduardo Habkost, Peter Maydell
On Wed, Jun 08, 2011 at 04:10:54PM +0200, Jan Kiszka wrote:
> Licensing of the virtio headers is no clarified. So we can finally
> resolve the clumbsy and constantly buggy #ifdef'ery around old KVM and
> virtio headers. Recent example: current qemu-kvm does not build against
> 2.6.32 headers.
>
> This series introduces an import mechanism for all required Linux
> headers so that the appropriate versions can be kept safely inside the
> QEMU tree. I've incorporated all the valuable review comments on the
> first version and rebased the result over current uq/master after
> rebasing that one over current QEMU master.
>
> Please note that I had no chance to test-build PPC or s390.
>
> Beside the header topic, this series also includes a few assorted KVM
> cleanup patches so that my queue is empty again.
Applied all, thanks.
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [Qemu-devel] [PATCH 00/12] [uq/master] Import linux headers and some cleanups
@ 2011-06-20 18:24 ` Marcelo Tosatti
0 siblings, 0 replies; 90+ messages in thread
From: Marcelo Tosatti @ 2011-06-20 18:24 UTC (permalink / raw)
To: Jan Kiszka
Cc: Peter Maydell, Eduardo Habkost, kvm, Alexander Graf, qemu-devel,
Andreas Färber, Avi Kivity, Christoph Hellwig
On Wed, Jun 08, 2011 at 04:10:54PM +0200, Jan Kiszka wrote:
> Licensing of the virtio headers is no clarified. So we can finally
> resolve the clumbsy and constantly buggy #ifdef'ery around old KVM and
> virtio headers. Recent example: current qemu-kvm does not build against
> 2.6.32 headers.
>
> This series introduces an import mechanism for all required Linux
> headers so that the appropriate versions can be kept safely inside the
> QEMU tree. I've incorporated all the valuable review comments on the
> first version and rebased the result over current uq/master after
> rebasing that one over current QEMU master.
>
> Please note that I had no chance to test-build PPC or s390.
>
> Beside the header topic, this series also includes a few assorted KVM
> cleanup patches so that my queue is empty again.
Applied all, thanks.
^ permalink raw reply [flat|nested] 90+ messages in thread