* [Buildroot] [PATCH v2] New packages: acl and attr
@ 2011-06-28 13:11 Yegor Yefremov
2011-07-11 22:11 ` Thomas Petazzoni
0 siblings, 1 reply; 2+ messages in thread
From: Yegor Yefremov @ 2011-06-28 13:11 UTC (permalink / raw)
To: buildroot
In addition to providing the acl and extended attributes functionality,
these new packages satisfy newer udev versions, so you can build all extras.
Signed-off-by: Heiko Zuerker <smiley73@users.sourceforge.net>
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
package/Config.in | 2 ++
package/acl/Config.in | 11 +++++++++++
package/acl/acl.mk | 18 ++++++++++++++++++
package/attr/Config.in | 7 +++++++
package/attr/attr.mk | 17 +++++++++++++++++
5 files changed, 55 insertions(+)
create mode 100644 package/acl/Config.in
create mode 100644 package/acl/acl.mk
create mode 100644 package/attr/Config.in
create mode 100644 package/attr/attr.mk
Index: b/package/Config.in
===================================================================
--- a/package/Config.in
+++ b/package/Config.in
@@ -487,6 +487,8 @@
endmenu
menu "System tools"
+source "package/acl/Config.in"
+source "package/attr/Config.in"
if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
source "package/bootutils/Config.in"
endif
Index: b/package/acl/Config.in
===================================================================
--- /dev/null
+++ b/package/acl/Config.in
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_ACL
+ bool "acl"
+ select BR2_PACKAGE_ATTR
+ help
+ POSIX Access Control Lists, which are used to define more
+ fine-grained discretionary access rights for files and
+ directories.
+ This package also provides libacl.
+
+comment "acl requires attr to be built"
+ depends on !BR2_PACKAGE_ATTR
Index: b/package/acl/acl.mk
===================================================================
--- /dev/null
+++ b/package/acl/acl.mk
@@ -0,0 +1,18 @@
+#############################################################
+#
+# acl
+#
+#############################################################
+
+ACL_VERSION = 2.2.49
+ACL_SOURCE := acl_$(ACL_VERSION).orig.tar.gz
+ACL_SITE = http://ftp.debian.org/debian/pool/main/a/acl
+ACL_INSTALL_STAGING = YES
+ACL_DEPENDENCIES = attr
+ACL_CONF_OPT = --enable-gettext=no
+
+# override installation paths, due to non-conform installation routine
+ACL_INSTALL_STAGING_OPT = prefix=$(STAGING_DIR)/usr exec_prefix=$(TARGET_DIR)/usr PKG_DEVLIB_DIR=$(STAGING_DIR)/usr/lib install-dev install-lib
+ACL_INSTALL_TARGET_OPT = prefix=$(TARGET_DIR)/usr exec_prefix=$(TARGET_DIR)/usr install install-lib
+
+$(eval $(call AUTOTARGETS,package,acl))
Index: b/package/attr/Config.in
===================================================================
--- /dev/null
+++ b/package/attr/Config.in
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_ATTR
+ bool "attr"
+ help
+ Extended attributes are name:value pairs associated permanently with
+ files and directories, similar to the environment strings associated
+ with a process
+ This package also provides libattr.
Index: b/package/attr/attr.mk
===================================================================
--- /dev/null
+++ b/package/attr/attr.mk
@@ -0,0 +1,17 @@
+#############################################################
+#
+# attr
+#
+#############################################################
+
+ATTR_VERSION = 2.4.46
+ATTR_SOURCE := attr_$(ATTR_VERSION).orig.tar.gz
+ATTR_SITE = http://ftp.debian.org/debian/pool/main/a/attr
+ATTR_INSTALL_STAGING = YES
+ATTR_CONF_OPT = --enable-gettext=no
+
+# override installation paths, due to non-conform installation routine
+ATTR_INSTALL_STAGING_OPT = prefix=$(STAGING_DIR)/usr exec_prefix=$(STAGING_DIR)/usr PKG_DEVLIB_DIR=$(STAGING_DIR)/usr/lib install-dev install-lib
+ATTR_INSTALL_TARGET_OPT = prefix=$(TARGET_DIR)/usr exec_prefix=$(TARGET_DIR)/usr install install-lib
+
+$(eval $(call AUTOTARGETS,package,attr))
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Buildroot] [PATCH v2] New packages: acl and attr
2011-06-28 13:11 [Buildroot] [PATCH v2] New packages: acl and attr Yegor Yefremov
@ 2011-07-11 22:11 ` Thomas Petazzoni
0 siblings, 0 replies; 2+ messages in thread
From: Thomas Petazzoni @ 2011-07-11 22:11 UTC (permalink / raw)
To: buildroot
Le Tue, 28 Jun 2011 15:11:34 +0200,
Yegor Yefremov <yegor_sub1@visionsystems.de> a ?crit :
> +comment "acl requires attr to be built"
> + depends on !BR2_PACKAGE_ATTR
Please get rid of this, as ATTR selects ACL, so ATTR is always visible,
and will automatically select ACL if enabled.
> Index: b/package/acl/acl.mk
> ===================================================================
> --- /dev/null
> +++ b/package/acl/acl.mk
> @@ -0,0 +1,18 @@
> +#############################################################
> +#
> +# acl
> +#
> +#############################################################
> +
> +ACL_VERSION = 2.2.49
> +ACL_SOURCE := acl_$(ACL_VERSION).orig.tar.gz
Use = instead of :=
> +ACL_SITE = http://ftp.debian.org/debian/pool/main/a/acl
> +ACL_INSTALL_STAGING = YES
> +ACL_DEPENDENCIES = attr
> +ACL_CONF_OPT = --enable-gettext=no
> +
> +# override installation paths, due to non-conform installation routine
Could you change the comment to something like :
# While the configuration system uses autoconf, the Makefiles are
# hand-written and do not use automake. Therefore, we have to hack
# around their deficiencies by passing installation paths.
(or something similar, at least mentioning that the root of the problem
is that automake isn't used).
> +ACL_INSTALL_STAGING_OPT = prefix=$(STAGING_DIR)/usr exec_prefix=$(TARGET_DIR)/usr PKG_DEVLIB_DIR=$(STAGING_DIR)/usr/lib install-dev install-lib
> +ACL_INSTALL_TARGET_OPT = prefix=$(TARGET_DIR)/usr exec_prefix=$(TARGET_DIR)/usr install install-lib
Maybe :
ACL_COMMON_INSTALL_OPTS = \
prefix=$(STAGING_DIR)/usr \
exec_prefix=$(TARGET_DIR)/usr
ACL_INSTALL_STAGING_OPT = \
$(ACL_COMMON_INSTALL_OPTS) \
PKG_DEVLIB_DIR=$(STAGING_DIR)/usr/lib \
install-dev install-lib
ACL_INSTALL_TARGET_OPT =
$(ACL_COMMON_INSTALL_OPTS) \
PKG_DEVLIB_DIR=$(STAGING_DIR)/usr/lib \
install install-lib
> +ATTR_VERSION = 2.4.46
> +ATTR_SOURCE := attr_$(ATTR_VERSION).orig.tar.gz
= instead of :=
> +# override installation paths, due to non-conform installation routine
> +ATTR_INSTALL_STAGING_OPT = prefix=$(STAGING_DIR)/usr exec_prefix=$(STAGING_DIR)/usr PKG_DEVLIB_DIR=$(STAGING_DIR)/usr/lib install-dev install-lib
> +ATTR_INSTALL_TARGET_OPT = prefix=$(TARGET_DIR)/usr exec_prefix=$(TARGET_DIR)/usr install install-lib
Same as previous package.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-07-11 22:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-28 13:11 [Buildroot] [PATCH v2] New packages: acl and attr Yegor Yefremov
2011-07-11 22:11 ` Thomas Petazzoni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.