xfs_bmap Cannot allocate memory

xfs_bmap Cannot allocate memory

[Michael Weissenbacher]

Hi List!
I've got a file here on which i cannot use xfs_bmap to determine it's
fragments. All that i know is that it must have a really great number of
them. It was the result of running a smbd without strict allocate. The
machine itself has 8GiB of RAM and 10GiB of swap available, so that
shouldn't be the problem. I guess this is some bug in xfs_bmap. Or is it
a known limitation?

# xfs_bmap /backup/tmp/cannot_allocate_memory.vhd
xfs_bmap: xfsctl(XFS_IOC_GETBMAPX) iflags=0x0
["/backup/tmp/cannot_allocate_memory.vhd"]: Cannot allocate memory

Another thing i noticed is that when i use the filefrag utility it
reports a different fragment count when invoked with -v than without it,
which i found pretty strange too. From that output i judge that the real
count is 62715, which is also not in sync with 45487.
# filefrag /backup/tmp/cannot_allocate_memory.vhd
/backup/tmp/cannot_allocate_memory.vhd: 1364 extents found
# filefrag -v /backup/tmp/cannot_allocate_memory.vhd | tail -n5
62711 43265805  57280748  57265654     17
62712 43266061  57265655  57280764      1
62713 43266317  57396971  57265655     17
62714 43266573  57265656  57396987      1 eof
/backup/tmp/cannot_allocate_memory.vhd: 45487 extents found

Other than that everything works perfectly well and xfs_repair doesn't
report any problems with the filesystem. So it's only a "cosmetical" issue.

Thanks for any hints,
Michael

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: xfs_bmap Cannot allocate memory

[Dave Chinner]

On Tue, Jul 05, 2011 at 07:02:56AM +0200, Michael Weissenbacher wrote:
> Hi List!
> I've got a file here on which i cannot use xfs_bmap to determine it's
> fragments. All that i know is that it must have a really great number of
> them. It was the result of running a smbd without strict allocate. The
> machine itself has 8GiB of RAM and 10GiB of swap available, so that
> shouldn't be the problem. I guess this is some bug in xfs_bmap. Or is it
> a known limitation?

Sounds like your memory is fragmented. IIRC, bmap tries to map all
the extents in a single buffer, and that might cause problems for
files with large numbers of extents. ENOMEM can occur if an
internal buffer cannot be allocated to hold all the extents to be
mapped in one call.

Try using the "-n <num_extents>" option to reduce the number of
extents gathered per ioctl call and see if that makes the
issue go away.

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: xfs_bmap Cannot allocate memory

[Michael Weissenbacher]

Hi Dave!
> 
> Sounds like your memory is fragmented. IIRC, bmap tries to map all
> the extents in a single buffer, and that might cause problems for
> files with large numbers of extents. ENOMEM can occur if an
> internal buffer cannot be allocated to hold all the extents to be
> mapped in one call.
> 
> Try using the "-n <num_extents>" option to reduce the number of
> extents gathered per ioctl call and see if that makes the
> issue go away.
> 
Thanks, i've tried that:
# xfs_bmap -n 3 /backup/tmp/cannot_allocate_memory.vhd
/backup/tmp/cannot_allocate_memory.vhd:
	0: [0..134279]: 444610560..444744839
	1: [134280..134399]: hole
	2: [134400..206495]: 433472688..433544783
# xfs_bmap -n 70000 /backup/tmp/cannot_allocate_memory.vhd | tail -n1
	69999: [244690864..244690871]: 1173913592..1173913599
# xfs_bmap -n 75000 /backup/tmp/cannot_allocate_memory.vhd | tail -n1
	74999: [253425664..253425671]: 1284986768..1284986775
# xfs_bmap -n 80000 /backup/tmp/cannot_allocate_memory.vhd | tail -n1
	79999: [262287488..262289015]: hole
# xfs_bmap -n 85000 /backup/tmp/cannot_allocate_memory.vhd | tail -n1
	84999: [272607184..272613335]: 1497107288..1497113439
# xfs_bmap -n 90000 /backup/tmp/cannot_allocate_memory.vhd | tail -n1
xfs_bmap: xfsctl(XFS_IOC_GETBMAPX) iflags=0x0
["/backup/tmp/cannot_allocate_memory.vhd"]: Cannot allocate memory

- Seems that xfs_bmap reads at maximum the number of extents that i
specified with -n
- Seems that the file has even more then 85000 extents

xfsprogs version is 3.1.5, compiled from source

cheers,
Michael

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: xfs_bmap Cannot allocate memory

[Dave Chinner]

On Tue, Jul 05, 2011 at 12:44:35PM +0200, Michael Weissenbacher wrote:
> Hi Dave!
> > 
> > Sounds like your memory is fragmented. IIRC, bmap tries to map all
> > the extents in a single buffer, and that might cause problems for
> > files with large numbers of extents. ENOMEM can occur if an
> > internal buffer cannot be allocated to hold all the extents to be
> > mapped in one call.
> > 
> > Try using the "-n <num_extents>" option to reduce the number of
> > extents gathered per ioctl call and see if that makes the
> > issue go away.
> > 
> Thanks, i've tried that:
> # xfs_bmap -n 3 /backup/tmp/cannot_allocate_memory.vhd
> /backup/tmp/cannot_allocate_memory.vhd:
> 	0: [0..134279]: 444610560..444744839
> 	1: [134280..134399]: hole
> 	2: [134400..206495]: 433472688..433544783
> # xfs_bmap -n 70000 /backup/tmp/cannot_allocate_memory.vhd | tail -n1
> 	69999: [244690864..244690871]: 1173913592..1173913599
> # xfs_bmap -n 75000 /backup/tmp/cannot_allocate_memory.vhd | tail -n1
> 	74999: [253425664..253425671]: 1284986768..1284986775
> # xfs_bmap -n 80000 /backup/tmp/cannot_allocate_memory.vhd | tail -n1
> 	79999: [262287488..262289015]: hole
> # xfs_bmap -n 85000 /backup/tmp/cannot_allocate_memory.vhd | tail -n1
> 	84999: [272607184..272613335]: 1497107288..1497113439
> # xfs_bmap -n 90000 /backup/tmp/cannot_allocate_memory.vhd | tail -n1
> xfs_bmap: xfsctl(XFS_IOC_GETBMAPX) iflags=0x0
> ["/backup/tmp/cannot_allocate_memory.vhd"]: Cannot allocate memory
> 
> - Seems that xfs_bmap reads at maximum the number of extents that i
> specified with -n
> - Seems that the file has even more then 85000 extents

Ah, there's a mismatch betwenteh man page and the implementation,
then. The man page implies that "-n <num>" means query num extents
at a time to map the entire file. It's implemented as "map the first
<num> extents", though.

You could try this:

# xfs_io -f -c "fiemap -v" <file>

Because fiemap loops doing getting a small number of extents at a
time...

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: xfs_bmap Cannot allocate memory

[Michael Weissenbacher]

Hi Dave!
> 
> Ah, there's a mismatch betwenteh man page and the implementation,
> then. The man page implies that "-n <num>" means query num extents
> at a time to map the entire file. It's implemented as "map the first
> <num> extents", though.
> 
> You could try this:
> 
> # xfs_io -f -c "fiemap -v" <file>
> 
> Because fiemap loops doing getting a small number of extents at a
> time...
> 
Ok, after i found out that fiemap is bleeding-edge (xfsprogs 3.1.5
doesn't support it) i compiled the latest git version of xfsprogs.

"fiemap -v" doesn't bail out on this file but continues to print extents
forever. I stopped it after the redirected output had already reached
90GiB and printed negative numbers. I guess it must have run into an
endless loop somewhere. xfs_bmap from the git version also throws
"Cannot allocate memory" at me.

# ./io/xfs_io -f -c "fiemap" /backup/tmp/cannot_allocate_memory.vhd >
/tmp/fiemap_output.txt
(Control-C)

# ls -lh /tmp/fiemap_output.txt
-rw-r--r-- 1 root root 90G 2011-07-05 15:06 /tmp/fiemap_output.txt

# tail -n10 /tmp/fiemap_output.txt
	-1925931740: [599928..602239]: 399016..401327
	-1925931739: [602240..603895]: hole
	-1925931738: [603896..603903]: 2480..2487
	-1925931737: [603904..606199]: hole
	-1925931736: [606200..608127]: 366632..368559
	-1925931735: [608128..1183]: hole
	-1925931734: [1184..134279]: 444611744..444744839
	-1925931733: [134280..134399]: hole
	-1925931732: [134400..206495]: 433472688..433544783
	-1925931731: [206496..210455]: hole

# ./io/xfs_io -f -c "bmap" /backup/tmp/cannot_allocate_memory.vhd
xfs_io: xfsctl(XFS_IOC_GETBMAPX) iflags=0x0
["/backup/tmp/cannot_allocate_memory.vhd"]: Cannot allocate memory

cheers,
Michael

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: xfs_bmap Cannot allocate memory

[Stan Hoeppner]

On 7/5/2011 12:02 AM, Michael Weissenbacher wrote:

> xfs_bmap: xfsctl(XFS_IOC_GETBMAPX) iflags=0x0

Googling the text above returns only 5 results, including your post
today to this list.  Thus I doubt your problem is the result of a bug in
XFS or xfsprogs.

Was the file being written to when you ran xfs_bmap?

If not, did you flush caches before running xfs_bmap?  Did you try
unmounting and remounting the filesystem?  These steps are sometimes
needed to get actual extent usage due to extents in cache that have not
yet been written to disk.

What distro/kernel version?

What xfsprogs version?

What filefrag version?

-- 
Stan

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: xfs_bmap Cannot allocate memory

[Michael Weissenbacher]

On Tue Jul 05 2011 12:35:31 GMT+0200 (CET), Stan Hoeppner
<stan@hardwarefreak.com> wrote:
> On 7/5/2011 12:02 AM, Michael Weissenbacher wrote:
> 
>> xfs_bmap: xfsctl(XFS_IOC_GETBMAPX) iflags=0x0
> 
> Googling the text above returns only 5 results, including your post
> today to this list.  Thus I doubt your problem is the result of a bug in
> XFS or xfsprogs.
> 
> Was the file being written to when you ran xfs_bmap?
No, the file has last been written 4 days ago

> If not, did you flush caches before running xfs_bmap?  Did you try
> unmounting and remounting the filesystem?  These steps are sometimes
> needed to get actual extent usage due to extents in cache that have not
> yet been written to disk.
Yes, i tried flushing the caches "echo 3 >/proc/sys/vm/drop_caches"
which didn't change anything.
I also did unmount, xfs_check (no errors reported), mount which didn't
change anything.

> What distro/kernel version?
Ubuntu Lucid 10.04.2 LTS with vanilla kernel 2.6.39.2

> What xfsprogs version?
Latest version 3.1.5, compiled from sources

> What filefrag version?
e2fsprogs 1.41.11-1ubuntu2.1

cheers,
Michael

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: xfs_bmap Cannot allocate memory

[Christoph Hellwig]

On Tue, Jul 05, 2011 at 07:02:56AM +0200, Michael Weissenbacher wrote:
> Hi List!
> I've got a file here on which i cannot use xfs_bmap to determine it's
> fragments. All that i know is that it must have a really great number of
> them. It was the result of running a smbd without strict allocate. The
> machine itself has 8GiB of RAM and 10GiB of swap available, so that
> shouldn't be the problem. I guess this is some bug in xfs_bmap. Or is it
> a known limitation?
> 
> # xfs_bmap /backup/tmp/cannot_allocate_memory.vhd
> xfs_bmap: xfsctl(XFS_IOC_GETBMAPX) iflags=0x0
> ["/backup/tmp/cannot_allocate_memory.vhd"]: Cannot allocate memory

What version of xfsprogs do you use?  xfsprogs 3.0.1 fixes a problem
in the bmap command that looked pretty similar to what you see.

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: xfs_bmap Cannot allocate memory

[Michael Weissenbacher]

Hi Christoph!
> 
> What version of xfsprogs do you use?  xfsprogs 3.0.1 fixes a problem
> in the bmap command that looked pretty similar to what you see.
> 
> 
Sorry, i forgot to mention that in my original post:
# xfs_bmap -V
xfs_bmap version 3.1.5

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs