* sata pmp / ata bus errors
@ 2011-08-31 21:04 Andrew Ryder
0 siblings, 0 replies; only message in thread
From: Andrew Ryder @ 2011-08-31 21:04 UTC (permalink / raw)
To: linux-ide
Hello,
I've got a couple sw raid arrays attached to my machine and one with 4
new 2TB drives recently installed is throwing some odd errors during
writing so far that I'm not sure if I can ignore?
The arrays are connected to my machine using the SIL 3124 PMP HBA and
the array causing some weird errors with the new 2TB seagate drives is
using a SIL4726 chipset.
Thanks,
Andrew
[3218691.585029] ata3.00: failed to read SCR 1 (Emask=0x40)
[3218691.585040] ata3.01: failed to read SCR 1 (Emask=0x40)
[3218691.585044] ata3.02: failed to read SCR 1 (Emask=0x40)
[3218691.585048] ata3.03: failed to read SCR 1 (Emask=0x40)
[3218691.585052] ata3.04: failed to read SCR 1 (Emask=0x40)
[3218691.585056] ata3.05: failed to read SCR 1 (Emask=0x40)
[3218691.585063] ata3.15: exception Emask 0x100 SAct 0x0 SErr 0x280000
action 0x6 frozen
[3218691.585067] ata3.15: irq_stat 0x00060002, PMP DMA CS errata
[3218691.585072] ata3.15: SError: { 10B8B BadCRC }
[3218691.585077] ata3.00: exception Emask 0x100 SAct 0x26 SErr 0x0
action 0x6 frozen
[3218691.585082] ata3.00: failed command: READ FPDMA QUEUED
[3218691.585091] ata3.00: cmd 60/78:08:08:bf:49/00:00:da:00:00/40 tag 1
ncq 61440 in
[3218691.585093] res 48/7c:00:00:00:00/00:00:40:10:48/00 Emask
0x2 (HSM violation)
[3218691.585097] ata3.00: status: { DRDY DRQ }
[3218691.585100] ata3.00: error: { UNC IDNF ABRT }
[3218691.585103] ata3.00: failed command: READ FPDMA QUEUED
[3218691.585111] ata3.00: cmd 60/30:10:00:c0:49/00:00:da:00:00/40 tag 2
ncq 24576 in
[3218691.585113] res 60/30:10:00:c0:49/00:00:da:00:00/40 Emask
0x81 (invalid argument)
[3218691.585117] ata3.00: status: { DRDY DF }
[3218691.585119] ata3.00: error: { IDNF }
[3218691.585123] ata3.00: failed command: READ FPDMA QUEUED
[3218691.585130] ata3.00: cmd 60/d0:28:30:c0:49/00:00:da:00:00/40 tag 5
ncq 106496 in
[3218691.585132] res 60/d0:28:30:c0:49/00:00:da:00:00/40 Emask
0x10 (ATA bus error)
[3218691.585136] ata3.00: status: { DRDY DF }
[3218691.585139] ata3.00: error: { ICRC UNC IDNF }
[3218691.585144] ata3.01: exception Emask 0x100 SAct 0x50 SErr 0x0
action 0x6 frozen
[3218691.585148] ata3.01: failed command: READ FPDMA QUEUED
[3218691.585156] ata3.01: cmd 60/80:20:80:bf:49/00:00:da:00:00/40 tag 4
ncq 65536 in
[3218691.585157] res 48/7c:00:00:00:00/00:00:80:40:48/00 Emask
0x2 (HSM violation)
[3218691.585161] ata3.01: status: { DRDY DRQ }
[3218691.585164] ata3.01: error: { UNC IDNF ABRT }
[3218691.585167] ata3.01: failed command: READ FPDMA QUEUED
[3218691.585175] ata3.01: cmd 60/00:30:00:c0:49/01:00:da:00:00/40 tag 6
ncq 131072 in
[3218691.585177] res 60/00:30:00:c0:49/00:00:da:00:00/40 Emask
0x1 (device error)
[3218691.585181] ata3.01: status: { DRDY DF }
[3218691.585186] ata3.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action
0x6 frozen
[3218691.585189] ata3.02: irq_stat 0x00060002, device error via D2H FIS
[3218691.585193] ata3.02: failed command: READ DMA EXT
[3218691.585200] ata3.02: cmd 25/00:80:80:bf:49/00:00:da:00:00/e0 tag 0
dma 65536 in
[3218691.585202] res 51/84:60:a0:bf:49/00:00:da:00:00/e0 Emask
0x10 (ATA bus error)
[3218691.585206] ata3.02: status: { DRDY ERR }
[3218691.585209] ata3.02: error: { ICRC ABRT }
[3218691.585214] ata3.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action
0x6 frozen
[3218691.585218] ata3.03: failed command: READ DMA EXT
[3218691.585226] ata3.03: cmd 25/00:80:01:b7:49/00:00:da:00:00/e0 tag 3
dma 65536 in
[3218691.585228] res 48/7c:00:00:00:00/00:00:c0:30:48/00 Emask
0x2 (HSM violation)
[3218691.585231] ata3.03: status: { DRDY DRQ }
[3218691.585234] ata3.03: error: { UNC IDNF ABRT }
[3218691.585239] ata3.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action
0x6 frozen
[3218691.585245] ata3.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action
0x6 frozen
[3218691.585253] ata3.15: hard resetting link
[3218691.585256] ata3: controller in dubious state, performing PORT_RST
[3218693.740039] ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[3218693.740237] ata3.00: hard resetting link
[3218694.046539] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[3218694.046604] ata3.01: hard resetting link
[3218694.352260] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[3218694.352296] ata3.02: hard resetting link
[3218694.657510] ata3.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[3218694.657562] ata3.03: hard resetting link
[3218694.963250] ata3.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[3218694.963278] ata3.04: hard resetting link
[3218695.268608] ata3.04: SATA link down (SStatus 0 SControl 320)
[3218695.268651] ata3.05: hard resetting link
[3218695.579209] ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[3218695.591705] ata3.00: configured for UDMA/100
[3218695.603969] ata3.01: configured for UDMA/100
[3218695.605429] ata3.02: configured for UDMA/100
[3218695.606935] ata3.03: configured for UDMA/100
[3218695.607042] ata3: EH complete
[3270876.406026] ata3.00: failed to read SCR 1 (Emask=0x40)
[3270876.406041] ata3.01: failed to read SCR 1 (Emask=0x40)
[3270876.406049] ata3.02: failed to read SCR 1 (Emask=0x40)
[3270876.406055] ata3.03: failed to read SCR 1 (Emask=0x40)
[3270876.406062] ata3.04: failed to read SCR 1 (Emask=0x40)
[3270876.406069] ata3.05: failed to read SCR 1 (Emask=0x40)
[3270876.406080] ata3.15: exception Emask 0x100 SAct 0x0 SErr 0x280000
action 0x6 frozen
[3270876.406086] ata3.15: irq_stat 0x00060002, PMP DMA CS errata
[3270876.406094] ata3.15: SError: { 10B8B BadCRC }
[3270876.406104] ata3.00: exception Emask 0x100 SAct 0x4 SErr 0x0 action
0x6 frozen
[3270876.406113] ata3.00: failed command: READ FPDMA QUEUED
[3270876.406128] ata3.00: cmd 60/80:10:00:c3:f6/00:00:51:00:00/40 tag 2
ncq 65536 in
[3270876.406131] res 48/7c:00:00:00:00/00:00:40:20:48/00 Emask
0x2 (HSM violation)
[3270876.406138] ata3.00: status: { DRDY DRQ }
[3270876.406143] ata3.00: error: { UNC IDNF ABRT }
[3270876.406153] ata3.01: exception Emask 0x100 SAct 0x8 SErr 0x0 action
0x6 frozen
[3270876.406160] ata3.01: failed command: READ FPDMA QUEUED
[3270876.406174] ata3.01: cmd 60/48:18:80:c3:f6/00:00:51:00:00/40 tag 3
ncq 36864 in
[3270876.406177] res 48/7c:00:00:00:00/00:00:00:30:48/00 Emask
0x2 (HSM violation)
[3270876.406184] ata3.01: status: { DRDY DRQ }
[3270876.406189] ata3.01: error: { UNC IDNF ABRT }
[3270876.406198] ata3.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action
0x6 frozen
[3270876.406205] ata3.02: failed command: READ DMA EXT
[3270876.406219] ata3.02: cmd 25/00:70:10:c3:f6/00:00:51:00:00/e0 tag 0
dma 57344 in
[3270876.406222] res 48/7c:00:00:00:00/00:00:80:00:48/00 Emask
0x2 (HSM violation)
[3270876.406229] ata3.02: status: { DRDY DRQ }
[3270876.406234] ata3.02: error: { UNC IDNF ABRT }
[3270876.406243] ata3.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action
0x6 frozen
[3270876.406249] ata3.03: irq_stat 0x00060002, device error via D2H FIS
[3270876.406256] ata3.03: failed command: READ DMA EXT
[3270876.406270] ata3.03: cmd 25/00:80:01:bb:f6/00:00:51:00:00/e0 tag 1
dma 65536 in
[3270876.406273] res 51/84:50:31:bb:f6/00:00:51:00:00/e0 Emask
0x10 (ATA bus error)
[3270876.406280] ata3.03: status: { DRDY ERR }
[3270876.406285] ata3.03: error: { ICRC ABRT }
[3270876.406294] ata3.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action
0x6 frozen
[3270876.406304] ata3.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action
0x6 frozen
[3270876.406316] ata3.15: hard resetting link
[3270876.406322] ata3: controller in dubious state, performing PORT_RST
[3270878.560051] ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[3270878.560529] ata3.00: hard resetting link
[3270878.865268] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[3270878.865305] ata3.01: hard resetting link
[3270879.170303] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[3270879.170335] ata3.02: hard resetting link
[3270879.475274] ata3.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[3270879.475307] ata3.03: hard resetting link
[3270879.780237] ata3.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[3270879.780270] ata3.04: hard resetting link
[3270880.085436] ata3.04: SATA link down (SStatus 0 SControl 320)
[3270880.085518] ata3.05: hard resetting link
[3270880.390268] ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[3270880.402541] ata3.00: configured for UDMA/100
[3270880.414832] ata3.01: configured for UDMA/100
[3270880.416257] ata3.02: configured for UDMA/100
[3270880.417772] ata3.03: configured for UDMA/100
[3270880.417842] ata3: EH complete
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-09-01 1:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-31 21:04 sata pmp / ata bus errors Andrew Ryder
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.