* [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
@ 2011-09-24 1:11 Brian S. Park
2011-09-24 10:05 ` Anatolij Gustschin
0 siblings, 1 reply; 8+ messages in thread
From: Brian S. Park @ 2011-09-24 1:11 UTC (permalink / raw)
To: u-boot
Hi,
I'm currently working on updating the firmware on our custom board
(based on IBM walnut board) and tried to build the latest released
u-boot 2011.06 using ELDK4.2.
Using the fresh source code extracted from u-boot-2011.06.tar.bz2, I
did "make walnut_config" and then "make". But I get the following error.
ppc_4xx-ld:u-boot.lds:1: parse error
make: *** [u-boot] Error 1
All of the code compiles. I think it's a linker error but I have no idea
how to resolve the problem.
Any help would be appreciated.
Brian
--
*Boundary-scan with limited budget, insufficient resources, or tight
schedules? Try TestGenie!
<http://www.corelis.com/products-JTAG/TestGenie-Boundary-Scan.htm>*
*Need a JTAG Refresher? Sign Up for a Free Boundary-Scan Training Class
Today!
<http://www.corelis.com/education/JTAG_Boundary-Scan_Seminars_and_Training.htm>*
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
2011-09-24 1:11 [U-Boot] Building u-boot for Walnut board (PPC 405GPr) Brian S. Park
@ 2011-09-24 10:05 ` Anatolij Gustschin
2011-09-26 16:20 ` Brian S. Park
0 siblings, 1 reply; 8+ messages in thread
From: Anatolij Gustschin @ 2011-09-24 10:05 UTC (permalink / raw)
To: u-boot
Hi,
On Fri, 23 Sep 2011 18:11:28 -0700
"Brian S. Park" <brian.park@corelis.com> wrote:
> Hi,
> I'm currently working on updating the firmware on our custom board
> (based on IBM walnut board) and tried to build the latest released
> u-boot 2011.06 using ELDK4.2.
> Using the fresh source code extracted from u-boot-2011.06.tar.bz2, I
> did "make walnut_config" and then "make". But I get the following error.
>
> ppc_4xx-ld:u-boot.lds:1: parse error
> make: *** [u-boot] Error 1
>
> All of the code compiles. I think it's a linker error but I have no idea
> how to resolve the problem.
> Any help would be appreciated.
$ wget -c ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2
$ tar xf u-boot-2011.06.tar.bz2
$ cd u-boot-2011.06/
$ export CROSS_COMPILE=ppc_4xx-
$ ./MAKEALL walnut
Configuring for walnut board...
text data bss dec hex filename
219550 19468 42544 281562 44bda ./u-boot
--------------------- SUMMARY ----------------------------
Boards compiled: 1
----------------------------------------------------------
There is no such problem with walnut board in the v2011.06 release.
Please double-check our source.
HTH,
Anatolij
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
2011-09-24 10:05 ` Anatolij Gustschin
@ 2011-09-26 16:20 ` Brian S. Park
2011-09-26 17:54 ` Brian S. Park
0 siblings, 1 reply; 8+ messages in thread
From: Brian S. Park @ 2011-09-26 16:20 UTC (permalink / raw)
To: u-boot
Thanks for the reply.
I was in the process updating ELDK from 4.1 to 4.2 and must have had
something screwed up. I tried again Today and it compiles without error.
Thanks for looking into this and helping a newbie.
Brian
On 9/24/2011 3:05 AM, Anatolij Gustschin wrote:
> Hi,
>
> On Fri, 23 Sep 2011 18:11:28 -0700
> "Brian S. Park"<brian.park@corelis.com> wrote:
>
>> Hi,
>> I'm currently working on updating the firmware on our custom board
>> (based on IBM walnut board) and tried to build the latest released
>> u-boot 2011.06 using ELDK4.2.
>> Using the fresh source code extracted from u-boot-2011.06.tar.bz2, I
>> did "make walnut_config" and then "make". But I get the following error.
>>
>> ppc_4xx-ld:u-boot.lds:1: parse error
>> make: *** [u-boot] Error 1
>>
>> All of the code compiles. I think it's a linker error but I have no idea
>> how to resolve the problem.
>> Any help would be appreciated.
> $ wget -c ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2
> $ tar xf u-boot-2011.06.tar.bz2
> $ cd u-boot-2011.06/
> $ export CROSS_COMPILE=ppc_4xx-
> $ ./MAKEALL walnut
> Configuring for walnut board...
> text data bss dec hex filename
> 219550 19468 42544 281562 44bda ./u-boot
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 1
> ----------------------------------------------------------
>
> There is no such problem with walnut board in the v2011.06 release.
> Please double-check our source.
>
> HTH,
> Anatolij
>
--
*Boundary-scan with limited budget, insufficient resources, or tight
schedules? Try TestGenie!
<http://www.corelis.com/products-JTAG/TestGenie-Boundary-Scan.htm>*
*Need a JTAG Refresher? Sign Up for a Free Boundary-Scan Training Class
Today!
<http://www.corelis.com/education/JTAG_Boundary-Scan_Seminars_and_Training.htm>*
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
2011-09-26 16:20 ` Brian S. Park
@ 2011-09-26 17:54 ` Brian S. Park
2011-09-26 18:06 ` Brian S. Park
2011-09-26 18:42 ` Wolfgang Denk
0 siblings, 2 replies; 8+ messages in thread
From: Brian S. Park @ 2011-09-26 17:54 UTC (permalink / raw)
To: u-boot
I found my problem.
My board, though based on walnut board, does not have real time clock.
So, I have to disable RTC support in u-boot. However, as soon as I
comment out
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
in walnut.h, line 68, I get build error.
[root at new-linuxdev u-boot-2011.06]# ./MAKEALL walnut
Configuring for walnut board...
ppc_4xx-ld:u-boot.lds:1: ignoring invalid character `#' in expression
ppc_4xx-ld:u-boot.lds:1: parse error
make: *** [u-boot] Error 1
ppc_4xx-size: './u-boot': No such file
--------------------- SUMMARY ----------------------------
Boards compiled: 1
Boards with warnings or errors: 1 ( walnut )
----------------------------------------------------------
[root at new-linuxdev u-boot-2011.06]#
I can figure my way out if it's a code problem. This, however, seems
like a configuration issue and I'm still a newbie when it comes to
u-boot configuration issue. It seems to have changed a lot since last
time I looked at u-boot a few years ago.
I'd appreciate some guidance.
Thank you in advance for any help and thank you all for putting such
wonderful software in public domain.
Brian
On 9/26/2011 9:20 AM, Brian S. Park wrote:
> Thanks for the reply.
> I was in the process updating ELDK from 4.1 to 4.2 and must have had
> something screwed up. I tried again Today and it compiles without error.
>
> Thanks for looking into this and helping a newbie.
>
> Brian
>
> On 9/24/2011 3:05 AM, Anatolij Gustschin wrote:
>> Hi,
>>
>> On Fri, 23 Sep 2011 18:11:28 -0700
>> "Brian S. Park"<brian.park@corelis.com> wrote:
>>
>>> Hi,
>>> I'm currently working on updating the firmware on our custom board
>>> (based on IBM walnut board) and tried to build the latest released
>>> u-boot 2011.06 using ELDK4.2.
>>> Using the fresh source code extracted from u-boot-2011.06.tar.bz2, I
>>> did "make walnut_config" and then "make". But I get the following
>>> error.
>>>
>>> ppc_4xx-ld:u-boot.lds:1: parse error
>>> make: *** [u-boot] Error 1
>>>
>>> All of the code compiles. I think it's a linker error but I have no
>>> idea
>>> how to resolve the problem.
>>> Any help would be appreciated.
>> $ wget -c ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2
>> $ tar xf u-boot-2011.06.tar.bz2
>> $ cd u-boot-2011.06/
>> $ export CROSS_COMPILE=ppc_4xx-
>> $ ./MAKEALL walnut
>> Configuring for walnut board...
>> text data bss dec hex filename
>> 219550 19468 42544 281562 44bda ./u-boot
>>
>> --------------------- SUMMARY ----------------------------
>> Boards compiled: 1
>> ----------------------------------------------------------
>>
>> There is no such problem with walnut board in the v2011.06 release.
>> Please double-check our source.
>>
>> HTH,
>> Anatolij
>>
>
>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
*Boundary-scan with limited budget, insufficient resources, or tight
schedules? Try TestGenie!
<http://www.corelis.com/products-JTAG/TestGenie-Boundary-Scan.htm>*
*Need a JTAG Refresher? Sign Up for a Free Boundary-Scan Training Class
Today!
<http://www.corelis.com/education/JTAG_Boundary-Scan_Seminars_and_Training.htm>*
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
2011-09-26 17:54 ` Brian S. Park
@ 2011-09-26 18:06 ` Brian S. Park
2011-09-26 18:44 ` Wolfgang Denk
2011-09-26 18:42 ` Wolfgang Denk
1 sibling, 1 reply; 8+ messages in thread
From: Brian S. Park @ 2011-09-26 18:06 UTC (permalink / raw)
To: u-boot
Sorry to keep relying to my self.
It seems that the tool that generates u-boot.lds does not like // in the
header file and putting it in the u-boot.lds file.
I started using /* */ instead and it compiles OK now.
Thanks.
Brian
On 9/26/2011 10:54 AM, Brian S. Park wrote:
> I found my problem.
>
> My board, though based on walnut board, does not have real time clock.
> So, I have to disable RTC support in u-boot. However, as soon as I
> comment out
>
> #define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
>
> in walnut.h, line 68, I get build error.
>
> [root at new-linuxdev u-boot-2011.06]# ./MAKEALL walnut
> Configuring for walnut board...
> ppc_4xx-ld:u-boot.lds:1: ignoring invalid character `#' in expression
> ppc_4xx-ld:u-boot.lds:1: parse error
> make: *** [u-boot] Error 1
> ppc_4xx-size: './u-boot': No such file
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 1
> Boards with warnings or errors: 1 ( walnut )
> ----------------------------------------------------------
> [root at new-linuxdev u-boot-2011.06]#
>
> I can figure my way out if it's a code problem. This, however, seems
> like a configuration issue and I'm still a newbie when it comes to
> u-boot configuration issue. It seems to have changed a lot since last
> time I looked at u-boot a few years ago.
>
> I'd appreciate some guidance.
>
> Thank you in advance for any help and thank you all for putting such
> wonderful software in public domain.
>
> Brian
>
> On 9/26/2011 9:20 AM, Brian S. Park wrote:
>> Thanks for the reply.
>> I was in the process updating ELDK from 4.1 to 4.2 and must have had
>> something screwed up. I tried again Today and it compiles without error.
>>
>> Thanks for looking into this and helping a newbie.
>>
>> Brian
>>
>> On 9/24/2011 3:05 AM, Anatolij Gustschin wrote:
>>> Hi,
>>>
>>> On Fri, 23 Sep 2011 18:11:28 -0700
>>> "Brian S. Park"<brian.park@corelis.com> wrote:
>>>
>>>> Hi,
>>>> I'm currently working on updating the firmware on our custom board
>>>> (based on IBM walnut board) and tried to build the latest released
>>>> u-boot 2011.06 using ELDK4.2.
>>>> Using the fresh source code extracted from u-boot-2011.06.tar.bz2, I
>>>> did "make walnut_config" and then "make". But I get the following
>>>> error.
>>>>
>>>> ppc_4xx-ld:u-boot.lds:1: parse error
>>>> make: *** [u-boot] Error 1
>>>>
>>>> All of the code compiles. I think it's a linker error but I have no
>>>> idea
>>>> how to resolve the problem.
>>>> Any help would be appreciated.
>>> $ wget -c ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2
>>> $ tar xf u-boot-2011.06.tar.bz2
>>> $ cd u-boot-2011.06/
>>> $ export CROSS_COMPILE=ppc_4xx-
>>> $ ./MAKEALL walnut
>>> Configuring for walnut board...
>>> text data bss dec hex filename
>>> 219550 19468 42544 281562 44bda ./u-boot
>>>
>>> --------------------- SUMMARY ----------------------------
>>> Boards compiled: 1
>>> ----------------------------------------------------------
>>>
>>> There is no such problem with walnut board in the v2011.06 release.
>>> Please double-check our source.
>>>
>>> HTH,
>>> Anatolij
>>>
>>
>>
>>
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
*Boundary-scan with limited budget, insufficient resources, or tight
schedules? Try TestGenie!
<http://www.corelis.com/products-JTAG/TestGenie-Boundary-Scan.htm>*
*Need a JTAG Refresher? Sign Up for a Free Boundary-Scan Training Class
Today!
<http://www.corelis.com/education/JTAG_Boundary-Scan_Seminars_and_Training.htm>*
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
2011-09-26 17:54 ` Brian S. Park
2011-09-26 18:06 ` Brian S. Park
@ 2011-09-26 18:42 ` Wolfgang Denk
1 sibling, 0 replies; 8+ messages in thread
From: Wolfgang Denk @ 2011-09-26 18:42 UTC (permalink / raw)
To: u-boot
Dear "Brian S. Park",
In message <4E80BC71.4000802@corelis.com> you wrote:
>
> I found my problem.
>
> My board, though based on walnut board, does not have real time clock.
> So, I have to disable RTC support in u-boot. However, as soon as I
> comment out
>
> #define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
>
> in walnut.h, line 68, I get build error.
>
> [root at new-linuxdev u-boot-2011.06]# ./MAKEALL walnut
> Configuring for walnut board...
> ppc_4xx-ld:u-boot.lds:1: ignoring invalid character `#' in expression
> ppc_4xx-ld:u-boot.lds:1: parse error
> make: *** [u-boot] Error 1
> ppc_4xx-size: './u-boot': No such file
Well, you fail to tell us how exactly you "comment out" this line, but
apparently exactly this is your problem. If you just remove this
line, like this:
index d10f748..e5a17a6 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -65,7 +65,6 @@
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_HAS_ETH0 1
-#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
/*
* Commands additional to the ones defined in amcc-common.h
you would get another type of build errors:
-> ./MAKEALL walnut
Configuring for walnut board...
common/libcommon.o: In function `do_date':
/home/wd/git/u-boot/work/common/cmd_date.c:60: undefined reference to `rtc_reset'
/home/wd/git/u-boot/work/common/cmd_date.c:63: undefined reference to `rtc_get'
/home/wd/git/u-boot/work/common/cmd_date.c:72: undefined reference to `rtc_set'
/home/wd/git/u-boot/work/common/cmd_date.c:81: undefined reference to `rtc_get'
net/libnet.o: In function `SntpHandler':
/home/wd/git/u-boot/work/net/sntp.c:70: undefined reference to `rtc_set'
make: *** [u-boot] Error 1
...which are pretty much self-explanatory.
By also disabling the "date" and "sntp" commands you would get:
-> ./MAKEALL walnut
Configuring for walnut board...
text data bss dec hex filename
218714 17552 42532 278798 4410e ./u-boot
--------------------- SUMMARY ----------------------------
Boards compiled: 1
----------------------------------------------------------
> I can figure my way out if it's a code problem. This, however, seems
> like a configuration issue and I'm still a newbie when it comes to
> u-boot configuration issue. It seems to have changed a lot since last
> time I looked at u-boot a few years ago.
The problem must be with your own changes to the config file,
especially with your way to "comment out" the #define.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Go to Heaven for the climate, Hell for the company." - Mark Twain
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
2011-09-26 18:06 ` Brian S. Park
@ 2011-09-26 18:44 ` Wolfgang Denk
2011-09-26 19:03 ` Brian S. Park
0 siblings, 1 reply; 8+ messages in thread
From: Wolfgang Denk @ 2011-09-26 18:44 UTC (permalink / raw)
To: u-boot
Dear "Brian S. Park",
In message <4E80BF3D.8050801@corelis.com> you wrote:
>
> It seems that the tool that generates u-boot.lds does not like // in the
> header file and putting it in the u-boot.lds file.
The "tool that generates u-boot.lds" is the standard C preprocessor.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
How can you tell when sour cream goes bad?
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
2011-09-26 18:44 ` Wolfgang Denk
@ 2011-09-26 19:03 ` Brian S. Park
0 siblings, 0 replies; 8+ messages in thread
From: Brian S. Park @ 2011-09-26 19:03 UTC (permalink / raw)
To: u-boot
Thank you for the information. I'm just re-learning my way around
u-boot. I appreciate your comments and pointers. Last time I used
u-boot, it did not use the current method for configuration and I was
able to us // to comment stuff out in the configuration header file.
Thank you and you guys rock!
Brian
On 9/26/2011 11:44 AM, Wolfgang Denk wrote:
> Dear "Brian S. Park",
>
> In message<4E80BF3D.8050801@corelis.com> you wrote:
>> It seems that the tool that generates u-boot.lds does not like // in the
>> header file and putting it in the u-boot.lds file.
> The "tool that generates u-boot.lds" is the standard C preprocessor.
>
> Best regards,
>
> Wolfgang Denk
>
--
*Boundary-scan with limited budget, insufficient resources, or tight
schedules? Try TestGenie!
<http://www.corelis.com/products-JTAG/TestGenie-Boundary-Scan.htm>*
*Need a JTAG Refresher? Sign Up for a Free Boundary-Scan Training Class
Today!
<http://www.corelis.com/education/JTAG_Boundary-Scan_Seminars_and_Training.htm>*
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2011-09-26 19:03 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-09-24 1:11 [U-Boot] Building u-boot for Walnut board (PPC 405GPr) Brian S. Park
2011-09-24 10:05 ` Anatolij Gustschin
2011-09-26 16:20 ` Brian S. Park
2011-09-26 17:54 ` Brian S. Park
2011-09-26 18:06 ` Brian S. Park
2011-09-26 18:44 ` Wolfgang Denk
2011-09-26 19:03 ` Brian S. Park
2011-09-26 18:42 ` Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.