From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Date: Tue, 27 Sep 2011 09:27:45 +0200 [thread overview]
Message-ID: <4E817AF1.6090502@denx.de> (raw)
In-Reply-To: <CABkLObrh-c1EEYQ-hWxEV-i58J1oy_fv5VcZ51zPDscq91BZDw@mail.gmail.com>
Hello Christian,
Christian Riesch wrote:
> Hello Heiko,
> Thank you for your reply. I have just noticed that the patches have
> already been pulled into arm/next so I guess I am quite late with my
> comments. I'd like to apologize for this; apparently I need another
No problem. Thanks for your reply!
> email filter that also filters for messages containing "am1808" and
> not only "da850" ;-)
;-)
> Which brings me to my next point: AFAIK Texas Instruments's AM18xx
> SoCs, their OMAP-L138, and their DA850 based devices basically differ
> only in the DSP/PRU part of the device. If you are (like in u-boot)
> only interested in the ARM part of chip, they are basically the same
> device. For some reason the Linux kernel and u-boot support for all
> these devices is labelled da850... Although I have no hardware to test
> it, I guess that your DDR memory controller initialization code could
> be used for the OMAP-L138 and the corresponding Davinci device as
> well. So since all code in u-boot for the entire device family is
> labelled da850... I guess your DDR initialization functions should get
> this prefix as well for consistency. Any comments from the
> maintainers/TI employees who know these devices better than I do?
Yes of course, such a rename should be done, if somebody has tested it!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2011-09-27 7:27 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-15 5:59 [U-Boot] [PATCH 0/8] arm, davinci: add support for the am1808 based enbw_cmc board Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 1/8] arm, davinci: add SYSCFG1 base and register struct Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 2/8] arm, davinci: add some missing defines in hardware.h Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 3/8] arm, davinci, am1808, gpio: add missing defines for bank 8 Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 4/8] arm, davinci: add ddr2 definition Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 5/8] arm, davinci: add NOR Boot Configuration Word Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR Heiko Schocher
2011-09-26 8:02 ` Christian Riesch
2011-09-26 8:28 ` Heiko Schocher
2011-09-27 6:57 ` Christian Riesch
2011-09-27 7:27 ` Heiko Schocher [this message]
2011-09-27 8:37 ` Christian Riesch
2011-09-27 8:50 ` Heiko Schocher
2011-09-27 10:36 ` Christian Riesch
2011-09-27 11:18 ` Heiko Schocher
2011-09-30 6:57 ` Christian Riesch
2011-09-30 7:11 ` Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 7/8] arm, davinci, da8xx: add cpuinfo Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 8/8] arm, davinci: add support for am1808 based enbw_cmc board Heiko Schocher
2011-09-15 7:39 ` Igor Grinberg
2011-09-15 7:56 ` Heiko Schocher
2011-09-19 5:50 ` [U-Boot] [PATCH v2 " Heiko Schocher
2011-09-23 20:47 ` Paulraj, Sandeep
2011-09-26 5:43 ` Heiko Schocher
2011-09-26 6:03 ` Paulraj, Sandeep
2011-09-26 6:08 ` Heiko Schocher
2011-09-27 7:05 ` Albert ARIBAUD
2011-09-30 7:55 ` Christian Riesch
2011-09-30 8:46 ` Heiko Schocher
2011-09-30 9:02 ` Christian Riesch
2011-09-30 9:32 ` Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E817AF1.6090502@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.