* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
[not found] <1316770597.99899.YahooMailNeo@web121512.mail.ne1.yahoo.com>
@ 2011-09-23 10:47 ` Gary Thomas
[not found] ` <1316776207.30918.YahooMailNeo@web121514.mail.ne1.yahoo.com>
[not found] ` <CAOU-OA+uKFYL4nJutdTHsUCYnGy9=NiYW65jGbRk76+GL6iocg@mail.gmail.com>
0 siblings, 2 replies; 15+ messages in thread
From: Gary Thomas @ 2011-09-23 10:47 UTC (permalink / raw)
To: openembedded-devel
On 2011-09-23 03:36, ibrahim demir wrote:
> Dear developers,
>
>
> I mentioned that an error at my last message half our ago, but when i run this commands there appear another error:
>
> #bitbake -f -c fetch ti-cgt6x
> #bitbake ti-codec-engine
>
> The result of first command is:
>
> *****************************************************************************
> parana@parana-desktop:/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts$ bitbake -f -c fetch ti-cgt6x
> NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
> Loading cache: 100% |###########################################| ETA: 00:00:00
> Loaded 7202 entries from dependency cache.
> NOTE: Angstrom DOES NOT support fso-apm because regular apmd is good enough--:--
> NOTE: Angstrom DOES NOT support ipkg because ipkg has been superseded by opkg:16
> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
> NOTE: Angstrom DOES NOT support bash-noemu because doesn't work on the target:03
> Parsing recipes: 100% |#########################################| Time: 00:00:19
> Parsing of 7333 .bb files complete (6576 cached, 757 parsed). 7979 targets, 316 skipped, 0 masked, 0 errors.
>
> Build Configuration:
> BB_VERSION = "1.12.0"
> METADATA_BRANCH = "2011.03-maintenance"
> METADATA_REVISION = "ece41e4"
> TARGET_ARCH = "arm"
> TARGET_OS = "linux-gnueabi"
> MACHINE = "beagleboard"
> DISTRO = "angstrom"
> DISTRO_VERSION = "2011.03"
> TARGET_FPU = "hard"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing RunQueue Tasks
> NOTE: Running task 2 of 2 (ID: 0, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_fetch)
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_fetch: Started
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_fetch: Succeeded
> NOTE: Tasks Summary: Attempted 2 tasks of which 1 didn't need to be rerun and 0 failed.
> *****************************************************************************
>
> Then the second and the error is can be seen at log:
>
> *****************************************************************************
> parana@parana-desktop:/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts$ bitbake ti-codec-engine
> NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
> Loading cache: 100% |###########################################| ETA: 00:00:00
> Loaded 7202 entries from dependency cache.
> NOTE: Angstrom DOES NOT support fso-apm because regular apmd is good enough--:--
> NOTE: Angstrom DOES NOT support ipkg because ipkg has been superseded by opkg:13
> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
> NOTE: Angstrom DOES NOT support bash-noemu because doesn't work on the target:03
> Parsing recipes: 100% |#########################################| Time: 00:00:16
> Parsing of 7333 .bb files complete (6576 cached, 757 parsed). 7979 targets, 316 skipped, 0 masked, 0 errors.
>
> Build Configuration:
> BB_VERSION = "1.12.0"
> METADATA_BRANCH = "2011.03-maintenance"
> METADATA_REVISION = "ece41e4"
> TARGET_ARCH = "arm"
> TARGET_OS = "linux-gnueabi"
> MACHINE = "beagleboard"
> DISTRO = "angstrom"
> DISTRO_VERSION = "2011.03"
> TARGET_FPU = "hard"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing RunQueue Tasks
> NOTE: Running task 743 of 1240 (ID: 275, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_unpack)
> NOTE: Running task 744 of 1240 (ID: 290, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_distribute_sources)
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_unpack: Started
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_distribute_sources: Started
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_distribute_sources: Succeeded
>
> This will install C6000 Code Generation Tools on your computer. Continue? [n/Y]
> Software License Agreement for
> Code Generation Tools, Utilities and Run-Time Libraries
>
> /--------------------------------------------------------------------
> | IMPORTANT - PLEASE READ THE FOLLOWING LICENSE AGREEMENT CAREFULLY. |
> | |
> | THIS IS A LEGALLY BINDING AGREEMENT. AFTER YOU READ THIS LICENSE |
> | AGREEMENT, YOU WILL BE ASKED WHETHER YOU ACCEPT AND AGREE TO THE |
> | TERMS OF THIS LICENSE AGREEMENT. DO NOT CLICK "I HAVE READ AND |
> | AGREE" UNLESS: (1) YOU ARE AUTHORIZED TO ACCEPT AND AGREE TO THE |
> | TERMS OF THIS LICENSE AGREEMENT ON BEHALF OF YOURSELF AND YOUR |
> | COMPANY; AND (2) YOU INTEND TO ENTER INTO AND TO BE BOUND BY THE |
> | TERMS OF THIS LEGALLY BINDING AGREEMENT ON BEHALF OF YOURSELF AND |
> | YOUR COMPANY. |
> \--------------------------------------------------------------------/
>
> IMPORTANT -- READ CAREFULLY: This software license agreement
> ("Agreement") is a legal agreement between you (either an individual
> or entity) and Texas Instruments Incorporated (TI"). The "Licensed
> Materials" subject to this Agreement include the software programs
> that TI has granted you access to download with this Agreement and any
> "on-line" or electronic documentation associated with these programs,
> or any portion thereof, as well as any updates or upgrades to such
> -- Press space to continue or 'q' to quit --
> Do you accept the TI CG EULA in LICENSE.txt? [y/N]
>
> Where do you want to install C6000 Code Generation Tools?
> [/opt/TI/TI_CGT_C6000_6.1.17]
> Installing C6000 Code Generation Tools...
>
> Installing Linux Code Generation Tools...
> Installing Unix Format READMEs...
> Installing Linux Format Include Files...
> Installing Linux Format Libraries...
> Installing Unix Manual Pages...
>
> Installation complete.
>
> ---------------------------------------------------------------------------
>
> Remember to set environment variables appropriate to your shell. Examples:
>
> (ba)sh -
> export
> C6X_C_DIR="/opt/TI/TI_CGT_C6000_6.1.17/include;/opt/TI/TI_CGT_C6000_6.1.17/lib"
>
> tcsh -
> setenv C6X_C_DIR
> "/opt/TI/TI_CGT_C6000_6.1.17/include;/opt/TI/TI_CGT_C6000_6.1.17/lib"
>
> DOS -
> set
> C6X_C_DIR=/opt/TI/TI_CGT_C6000_6.1.17\include;/opt/TI/TI_CGT_C6000_6.1.17\lib
>
> ---------------------------------------------------------------------------
>
> -- Press space to continue ---- Press space to continue --NOTE: package ti-cgt6x-1_6_1_17-r4: task do_unpack: Succeeded
> NOTE: Running task 1184 of 1240 (ID: 276, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_patch)
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_patch: Started
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_patch: Succeeded
> NOTE: Running task 1185 of 1240 (ID: 286, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_configure)
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_configure: Started
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_configure: Succeeded
> NOTE: Running task 1186 of 1240 (ID: 287, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_qa_configure)
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_qa_configure: Started
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_qa_configure: Succeeded
> NOTE: Running task 1187 of 1240 (ID: 288, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_compile)
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_compile: Started
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_compile: Succeeded
> NOTE: Running task 1188 of 1240 (ID: 277, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_install)
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_install: Started
> ERROR: Logfile of failure stored in: /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/temp/log.do_install.24167
> Log data follows:
> | + do_install
> | + install -d /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/image/usr/share/ti/ti-cgt6x-tree
> | + cp -pPrf '/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/cgt6x_6_1_17/*' /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/image/usr/share/ti/ti-cgt6x-tree
> | cp: cannot stat `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/cgt6x_6_1_17/*': No such file or directory
> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_install: Failed
> ERROR: Function 'do_install' failed (see /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/temp/log.do_install.24167 for further information)
> ERROR: Task 277 (/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_install) failed with exit code '1'
> ERROR: '/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb' failed
> *****************************************************************************
>
> Even if i didnt understand why i get all the errors bitbake can generate:) , i still wonder what is wrong..
Check to make sure that you don't have write permission to /opt
If you have write permission in the directory /opt, the installer
fails to put the tools where they belong in your OE build.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
[not found] ` <1316776207.30918.YahooMailNeo@web121514.mail.ne1.yahoo.com>
@ 2011-09-23 11:15 ` Gary Thomas
2011-09-23 14:16 ` ibrahim demir
0 siblings, 1 reply; 15+ messages in thread
From: Gary Thomas @ 2011-09-23 11:15 UTC (permalink / raw)
To: ibrahim demir; +Cc: openembedded-devel
On 2011-09-23 05:10, ibrahim demir wrote:
> Yes, i had write permission to /opt and i set it only read and execute. But when i run "bitbake ti-codec-engine" it gives "/bin/sh:
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/sysroots/beagleboard-angstrom-linux-gnueabi/usr/share/ti/ti-cgt6x-tree/bin/cl6x: No
> such file or directory" (which is the error message, i get this morning a lot) What should i do next?
Please keep your replies on the mailing list so everyone benefits. Also, top-posting is poor form.
You'll need to clean out the tools package so it gets reinstalled.
At the very least, try these steps:
% bitbake ti-cgt6x ti-codec-engine -c clean
% bitbake ti-codec-engine
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> *From:* Gary Thomas <gary@mlbassoc.com>
> *To:* openembedded-devel@lists.openembedded.org
> *Cc:* ibrahim demir <juhsis@yahoo.com>
> *Sent:* Friday, September 23, 2011 1:47 PM
> *Subject:* Re: [oe] ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
>
> On 2011-09-23 03:36, ibrahim demir wrote:
>> Dear developers,
>>
>>
>> I mentioned that an error at my last message half our ago, but when i run this commands there appear another error:
>>
>> #bitbake -f -c fetch ti-cgt6x
>> #bitbake ti-codec-engine
>>
>> The result of first command is:
>>
>> *****************************************************************************
>> parana@parana-desktop:/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts$ bitbake -f -c fetch ti-cgt6x
>> NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
>> Loading cache: 100% |###########################################| ETA: 00:00:00
>> Loaded 7202 entries from dependency cache.
>> NOTE: Angstrom DOES NOT support fso-apm because regular apmd is good enough--:--
>> NOTE: Angstrom DOES NOT support ipkg because ipkg has been superseded by opkg:16
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bash-noemu because doesn't work on the target:03
>> Parsing recipes: 100% |#########################################| Time: 00:00:19
>> Parsing of 7333 .bb files complete (6576 cached, 757 parsed). 7979 targets, 316 skipped, 0 masked, 0 errors.
>>
>> Build Configuration:
>> BB_VERSION = "1.12.0"
>> METADATA_BRANCH = "2011.03-maintenance"
>> METADATA_REVISION = "ece41e4"
>> TARGET_ARCH = "arm"
>> TARGET_OS = "linux-gnueabi"
>> MACHINE = "beagleboard"
>> DISTRO = "angstrom"
>> DISTRO_VERSION = "2011.03"
>> TARGET_FPU = "hard"
>>
>> NOTE: Resolving any missing task queue dependencies
>> NOTE: Preparing runqueue
>> NOTE: Executing RunQueue Tasks
>> NOTE: Running task 2 of 2 (ID: 0, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_fetch)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_fetch: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_fetch: Succeeded
>> NOTE: Tasks Summary: Attempted 2 tasks of which 1 didn't need to be rerun and 0 failed.
>> *****************************************************************************
>>
>> Then the second and the error is can be seen at log:
>>
>> *****************************************************************************
>> parana@parana-desktop:/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts$ bitbake ti-codec-engine
>> NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
>> Loading cache: 100% |###########################################| ETA: 00:00:00
>> Loaded 7202 entries from dependency cache.
>> NOTE: Angstrom DOES NOT support fso-apm because regular apmd is good enough--:--
>> NOTE: Angstrom DOES NOT support ipkg because ipkg has been superseded by opkg:13
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bash-noemu because doesn't work on the target:03
>> Parsing recipes: 100% |#########################################| Time: 00:00:16
>> Parsing of 7333 .bb files complete (6576 cached, 757 parsed). 7979 targets, 316 skipped, 0 masked, 0 errors.
>>
>> Build Configuration:
>> BB_VERSION = "1.12.0"
>> METADATA_BRANCH = "2011.03-maintenance"
>> METADATA_REVISION = "ece41e4"
>> TARGET_ARCH = "arm"
>> TARGET_OS = "linux-gnueabi"
>> MACHINE = "beagleboard"
>> DISTRO = "angstrom"
>> DISTRO_VERSION = "2011.03"
>> TARGET_FPU = "hard"
>>
>> NOTE: Resolving any missing task queue dependencies
>> NOTE: Preparing runqueue
>> NOTE: Executing RunQueue Tasks
>> NOTE: Running task 743 of 1240 (ID: 275, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_unpack)
>> NOTE: Running task 744 of 1240 (ID: 290, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb,
> do_distribute_sources)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_unpack: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_distribute_sources: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_distribute_sources: Succeeded
>>
>> This will install C6000 Code Generation Tools on your computer. Continue? [n/Y]
>> Software License Agreement for
>> Code Generation Tools, Utilities and Run-Time Libraries
>>
>> /--------------------------------------------------------------------
>> | IMPORTANT - PLEASE READ THE FOLLOWING LICENSE AGREEMENT CAREFULLY. |
>> | |
>> | THIS IS A LEGALLY BINDING AGREEMENT. AFTER YOU READ THIS LICENSE |
>> | AGREEMENT, YOU WILL BE ASKED WHETHER YOU ACCEPT AND AGREE TO THE |
>> | TERMS OF THIS LICENSE AGREEMENT. DO NOT CLICK "I HAVE READ AND |
>> | AGREE" UNLESS: (1) YOU ARE AUTHORIZED TO ACCEPT AND AGREE TO THE |
>> | TERMS OF THIS LICENSE AGREEMENT ON BEHALF OF YOURSELF AND YOUR |
>> | COMPANY; AND (2) YOU INTEND TO ENTER INTO AND TO BE BOUND BY THE |
>> | TERMS OF THIS LEGALLY BINDING AGREEMENT ON BEHALF OF YOURSELF AND |
>> | YOUR COMPANY. |
>> \--------------------------------------------------------------------/
>>
>> IMPORTANT -- READ CAREFULLY: This software license agreement
>> ("Agreement") is a legal agreement between you (either an individual
>> or entity) and Texas Instruments Incorporated (TI"). The "Licensed
>> Materials" subject to this Agreement include the software programs
>> that TI has granted you access to download with this Agreement and any
>> "on-line" or electronic documentation associated with these programs,
>> or any portion thereof, as well as any updates or upgrades to such
>> -- Press space to continue or 'q' to quit --
>> Do you accept the TI CG EULA in LICENSE.txt? [y/N]
>>
>> Where do you want to install C6000 Code Generation Tools?
>> [/opt/TI/TI_CGT_C6000_6.1.17]
>> Installing C6000 Code Generation Tools...
>>
>> Installing Linux Code Generation Tools...
>> Installing Unix Format READMEs...
>> Installing Linux Format Include Files...
>> Installing Linux Format Libraries...
>> Installing Unix Manual Pages...
>>
>> Installation complete.
>>
>> ---------------------------------------------------------------------------
>>
>> Remember to set environment variables appropriate to your shell. Examples:
>>
>> (ba)sh -
>> export
>> C6X_C_DIR="/opt/TI/TI_CGT_C6000_6.1.17/include;/opt/TI/TI_CGT_C6000_6.1.17/lib"
>>
>> tcsh -
>> setenv C6X_C_DIR
>> "/opt/TI/TI_CGT_C6000_6.1.17/include;/opt/TI/TI_CGT_C6000_6.1.17/lib"
>>
>> DOS -
>> set
>> C6X_C_DIR=/opt/TI/TI_CGT_C6000_6.1.17\include;/opt/TI/TI_CGT_C6000_6.1.17\lib
>>
>> ---------------------------------------------------------------------------
>>
>> -- Press space to continue ---- Press space to continue --NOTE: package ti-cgt6x-1_6_1_17-r4: task do_unpack: Succeeded
>> NOTE: Running task 1184 of 1240 (ID: 276, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_patch)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_patch: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_patch: Succeeded
>> NOTE: Running task 1185 of 1240 (ID: 286, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_configure)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_configure: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_configure: Succeeded
>> NOTE: Running task 1186 of 1240 (ID: 287, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_qa_configure)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_qa_configure: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_qa_configure: Succeeded
>> NOTE: Running task 1187 of 1240 (ID: 288, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_compile)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_compile: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_compile: Succeeded
>> NOTE: Running task 1188 of 1240 (ID: 277, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_install)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_install: Started
>> ERROR: Logfile of failure stored in:
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/temp/log.do_install.24167
>> Log data follows:
>> | + do_install
>> | + install -d
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/image/usr/share/ti/ti-cgt6x-tree
>> | + cp -pPrf
> '/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/cgt6x_6_1_17/*'
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/image/usr/share/ti/ti-cgt6x-tree
>> | cp: cannot stat
> `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/cgt6x_6_1_17/*': No
> such file or directory
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_install: Failed
>> ERROR: Function 'do_install' failed (see
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/temp/log.do_install.24167
> for further information)
>> ERROR: Task 277 (/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_install) failed with exit code '1'
>> ERROR: '/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb' failed
>> *****************************************************************************
>>
>> Even if i didnt understand why i get all the errors bitbake can generate:) , i still wonder what is wrong..
>
> Check to make sure that you don't have write permission to /opt
> If you have write permission in the directory /opt, the installer
> fails to put the tools where they belong in your OE build.
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
2011-09-23 11:15 ` Gary Thomas
@ 2011-09-23 14:16 ` ibrahim demir
0 siblings, 0 replies; 15+ messages in thread
From: ibrahim demir @ 2011-09-23 14:16 UTC (permalink / raw)
To: Gary Thomas; +Cc: openembedded-devel
I have fixed this problem.. As you said, it creates all the required things in /opt/ti/.. instead of /OEBASE directory. Basicly what i did is, copying all the things under directory /opt/ti and pasting them where the /bin/cl6x must stay.�
Thanks for your help.
On 2011-09-23 05:10, ibrahim demir wrote:
> Yes, i had write permission to /opt and i set it only read and execute. But when i run "bitbake ti-codec-engine" it gives "/bin/sh:
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/sysroots/beagleboard-angstrom-linux-gnueabi/usr/share/ti/ti-cgt6x-tree/bin/cl6x: No
> such file or directory" (which is the error message, i get this morning a lot) What should i do next?
Please keep your replies on the mailing list so everyone benefits.� Also, top-posting is poor form.
You'll need to clean out the tools package so it gets reinstalled.
At the very least, try these steps:
� % bitbake ti-cgt6x ti-codec-engine -c clean
� % bitbake ti-codec-engine
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> *From:* Gary Thomas <gary@mlbassoc.com>
> *To:* openembedded-devel@lists.openembedded.org
> *Cc:* ibrahim demir <juhsis@yahoo.com>
> *Sent:* Friday, September 23, 2011 1:47 PM
> *Subject:* Re: [oe] ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
>
> On 2011-09-23 03:36, ibrahim demir wrote:
>>� Dear developers,
>>
>>
>>� I mentioned that an error at my last message half our ago, but when i run this commands there appear another error:
>>
>>� #bitbake -f -c fetch ti-cgt6x
>>� #bitbake ti-codec-engine
>>
>>� The result of first command is:
>>
>>� *****************************************************************************
>>� parana@parana-desktop:/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts$ bitbake -f -c fetch ti-cgt6x
>>� NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
>>� Loading cache: 100% |###########################################| ETA: 00:00:00
>>� Loaded 7202 entries from dependency cache.
>>� NOTE: Angstrom DOES NOT support fso-apm because regular apmd is good enough--:--
>>� NOTE: Angstrom DOES NOT support ipkg because ipkg has been superseded by opkg:16
>>� NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>>� NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>>� NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>>� NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>>� NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>>� NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>>� NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>>� NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>>� NOTE: Angstrom DOES NOT support bash-noemu because doesn't work on the target:03
>>� Parsing recipes: 100% |#########################################| Time: 00:00:19
>>� Parsing of 7333 .bb files complete (6576 cached, 757 parsed). 7979 targets, 316 skipped, 0 masked, 0 errors.
>>
>>� Build Configuration:
>>� BB_VERSION = "1.12.0"
>>� METADATA_BRANCH = "2011.03-maintenance"
>>� METADATA_REVISION = "ece41e4"
>>� TARGET_ARCH = "arm"
>>� TARGET_OS = "linux-gnueabi"
>>� MACHINE = "beagleboard"
>>� DISTRO = "angstrom"
>>� DISTRO_VERSION = "2011.03"
>>� TARGET_FPU = "hard"
>>
>>� NOTE: Resolving any missing task queue dependencies
>>� NOTE: Preparing runqueue
>>� NOTE: Executing RunQueue Tasks
>>� NOTE: Running task 2 of 2 (ID: 0, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_fetch)
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_fetch: Started
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_fetch: Succeeded
>>� NOTE: Tasks Summary: Attempted 2 tasks of which 1 didn't need to be rerun and 0 failed.
>>� *****************************************************************************
>>
>>� Then the second and the error is can be seen at log:
>>
>>� *****************************************************************************
>>� parana@parana-desktop:/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts$ bitbake ti-codec-engine
>>� NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
>>� Loading cache: 100% |###########################################| ETA: 00:00:00
>>� Loaded 7202 entries from dependency cache.
>>� NOTE: Angstrom DOES NOT support fso-apm because regular apmd is good enough--:--
>>� NOTE: Angstrom DOES NOT support ipkg because ipkg has been superseded by opkg:13
>>� NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>>� NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>>� NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>>� NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>>� NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>>� NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>>� NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>>� NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>>� NOTE: Angstrom DOES NOT support bash-noemu because doesn't work on the target:03
>>� Parsing recipes: 100% |#########################################| Time: 00:00:16
>>� Parsing of 7333 .bb files complete (6576 cached, 757 parsed). 7979 targets, 316 skipped, 0 masked, 0 errors.
>>
>>� Build Configuration:
>>� BB_VERSION = "1.12.0"
>>� METADATA_BRANCH = "2011.03-maintenance"
>>� METADATA_REVISION = "ece41e4"
>>� TARGET_ARCH = "arm"
>>� TARGET_OS = "linux-gnueabi"
>>� MACHINE = "beagleboard"
>>� DISTRO = "angstrom"
>>� DISTRO_VERSION = "2011.03"
>>� TARGET_FPU = "hard"
>>
>>� NOTE: Resolving any missing task queue dependencies
>>� NOTE: Preparing runqueue
>>� NOTE: Executing RunQueue Tasks
>>� NOTE: Running task 743 of 1240 (ID: 275, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_unpack)
>>� NOTE: Running task 744 of 1240 (ID: 290, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb,
> do_distribute_sources)
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_unpack: Started
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_distribute_sources: Started
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_distribute_sources: Succeeded
>>
>>� This will install C6000 Code Generation Tools on your computer. Continue? [n/Y]
>>� Software License Agreement for
>>� Code Generation Tools, Utilities and Run-Time Libraries
>>
>>� /--------------------------------------------------------------------
>>� | IMPORTANT - PLEASE READ THE FOLLOWING LICENSE AGREEMENT CAREFULLY. |
>>� | |
>>� | THIS IS A LEGALLY BINDING AGREEMENT. AFTER YOU READ THIS LICENSE |
>>� | AGREEMENT, YOU WILL BE ASKED WHETHER YOU ACCEPT AND AGREE TO THE |
>>� | TERMS OF THIS LICENSE AGREEMENT. DO NOT CLICK "I HAVE READ AND |
>>� | AGREE" UNLESS: (1) YOU ARE AUTHORIZED TO ACCEPT AND AGREE TO THE |
>>� | TERMS OF THIS LICENSE AGREEMENT ON BEHALF OF YOURSELF AND YOUR |
>>� | COMPANY; AND (2) YOU INTEND TO ENTER INTO AND TO BE BOUND BY THE |
>>� | TERMS OF THIS LEGALLY BINDING AGREEMENT ON BEHALF OF YOURSELF AND |
>>� | YOUR COMPANY. |
>>� \--------------------------------------------------------------------/
>>
>>� IMPORTANT -- READ CAREFULLY: This software license agreement
>>� ("Agreement") is a legal agreement between you (either an individual
>>� or entity) and Texas Instruments Incorporated (TI"). The "Licensed
>>� Materials" subject to this Agreement include the software programs
>>� that TI has granted you access to download with this Agreement and any
>>� "on-line" or electronic documentation associated with these programs,
>>� or any portion thereof, as well as any updates or upgrades to such
>>� -- Press space to continue or 'q' to quit --
>>� Do you accept the TI CG EULA in LICENSE.txt? [y/N]
>>
>>� Where do you want to install C6000 Code Generation Tools?
>>� [/opt/TI/TI_CGT_C6000_6.1.17]
>>� Installing C6000 Code Generation Tools...
>>
>>� Installing Linux Code Generation Tools...
>>� Installing Unix Format READMEs...
>>� Installing Linux Format Include Files...
>>� Installing Linux Format Libraries...
>>� Installing Unix Manual Pages...
>>
>>� Installation complete.
>>
>>� ---------------------------------------------------------------------------
>>
>>� Remember to set environment variables appropriate to your shell. Examples:
>>
>>� (ba)sh -
>>� export
>>� C6X_C_DIR="/opt/TI/TI_CGT_C6000_6.1.17/include;/opt/TI/TI_CGT_C6000_6.1.17/lib"
>>
>>� tcsh -
>>� setenv C6X_C_DIR
>>� "/opt/TI/TI_CGT_C6000_6.1.17/include;/opt/TI/TI_CGT_C6000_6.1.17/lib"
>>
>>� DOS -
>>� set
>>� C6X_C_DIR=/opt/TI/TI_CGT_C6000_6.1.17\include;/opt/TI/TI_CGT_C6000_6.1.17\lib
>>
>>� ---------------------------------------------------------------------------
>>
>>� -- Press space to continue ---- Press space to continue --NOTE: package ti-cgt6x-1_6_1_17-r4: task do_unpack: Succeeded
>>� NOTE: Running task 1184 of 1240 (ID: 276, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_patch)
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_patch: Started
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_patch: Succeeded
>>� NOTE: Running task 1185 of 1240 (ID: 286, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_configure)
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_configure: Started
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_configure: Succeeded
>>� NOTE: Running task 1186 of 1240 (ID: 287, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_qa_configure)
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_qa_configure: Started
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_qa_configure: Succeeded
>>� NOTE: Running task 1187 of 1240 (ID: 288, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_compile)
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_compile: Started
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_compile: Succeeded
>>� NOTE: Running task 1188 of 1240 (ID: 277, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_install)
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_install: Started
>>� ERROR: Logfile of failure stored in:
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/temp/log.do_install.24167
>>� Log data follows:
>>� | + do_install
>>� | + install -d
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/image/usr/share/ti/ti-cgt6x-tree
>>� | + cp -pPrf
> '/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/cgt6x_6_1_17/*'
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/image/usr/share/ti/ti-cgt6x-tree
>>� | cp: cannot stat
> `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/cgt6x_6_1_17/*': No
> such file or directory
>>� NOTE: package ti-cgt6x-1_6_1_17-r4: task do_install: Failed
>>� ERROR: Function 'do_install' failed (see
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/temp/log.do_install.24167
> for further information)
>>� ERROR: Task 277 (/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_install) failed with exit code '1'
>>� ERROR: '/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb' failed
>>� *****************************************************************************
>>
>>� Even if i didnt understand why i get all the errors bitbake can generate:) , i still wonder what is wrong..
>
> Check to make sure that you don't have write permission to /opt
> If you have write permission in the directory /opt, the installer
> fails to put the tools where they belong in your OE build.
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
>
--
------------------------------------------------------------
Gary Thomas� � � � � � � � |� Consulting for the
MLB Associates� � � � � � � |� � Embedded world
------------------------------------------------------------
From mdpoole@troilus.org Sat Sep 24 01:51:26 2011
Received: from na3sys009aog118.obsmtp.com ([74.125.149.244])
by linuxtogo.org with smtp (Exim 4.72)
(envelope-from <mdpoole@troilus.org>) id 1R7FWg-0002pi-A2
for openembedded-devel@lists.openembedded.org;
Sat, 24 Sep 2011 01:51:26 +0200
Received: from mail-gx0-f171.google.com ([209.85.161.171]) (using TLSv1) by
na3sys009aob118.postini.com ([74.125.148.12]) with SMTP
ID DSNKTn0aPdB7wX50nTATdSE4+rxY75oEyQXd@postini.com;
Fri, 23 Sep 2011 16:46:07 PDT
Received: by mail-gx0-f171.google.com with SMTP id 27so3697257gxk.16
for <openembedded-devel@lists.openembedded.org>;
Fri, 23 Sep 2011 16:46:05 -0700 (PDT)
MIME-Version: 1.0
Received: by 10.42.130.138 with SMTP id v10mr4940499ics.159.1316810812422;
Fri, 23 Sep 2011 13:46:52 -0700 (PDT)
Received: by 10.42.166.3 with HTTP; Fri, 23 Sep 2011 13:46:52 -0700 (PDT)
In-Reply-To: <4E7C63C8.3050900@mlbassoc.com>
References: <1316770597.99899.YahooMailNeo@web121512.mail.ne1.yahoo.com>
<4E7C63C8.3050900@mlbassoc.com>
Date: Fri, 23 Sep 2011 16:46:52 -0400
Message-ID: <CAOU-OA+uKFYL4nJutdTHsUCYnGy9
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
[not found] ` <CAOU-OA+uKFYL4nJutdTHsUCYnGy9=NiYW65jGbRk76+GL6iocg@mail.gmail.com>
@ 2011-09-24 10:45 ` Gary Thomas
2011-09-24 18:24 ` ibrahim demir
2011-09-28 14:58 ` Michael Poole
0 siblings, 2 replies; 15+ messages in thread
From: Gary Thomas @ 2011-09-24 10:45 UTC (permalink / raw)
To: openembedded-devel
On 2011-09-23 14:46, Michael Poole wrote:
> On Fri, Sep 23, 2011 at 6:47 AM, Gary Thomas wrote:
>> Check to make sure that you don't have write permission to /opt
>> If you have write permission in the directory /opt, the installer
>> fails to put the tools where they belong in your OE build.
>
> Is it generally known that this limitation is due to a bug in
> ti-eula-unpack.inc? (Python's print automatically adds a newline,
> which the code's author apparently did not expect.) My local repo has
> these changes to allow in-tree installs by users with write access to
> /opt; please pardon Gmail's mangling of leading whitespace:
I don't know if this is a generally known fact; it should be, I reported it to
this list more than a year ago and was basically ignored [actually told I just
shouldn't have write access to /opt so the issue was my own fault...]
Does the unpack work with your patches if /opt is not writeable?
>
> diff --git a/recipes/powervr-drivers/libgles-omap3.inc b/recipes/powervr-driv
> index ab4b248..5acc4da 100644
> --- a/recipes/powervr-drivers/libgles-omap3.inc
> +++ b/recipes/powervr-drivers/libgles-omap3.inc
> @@ -19,7 +19,8 @@ SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sd
> S = "${WORKDIR}/OMAP35x_Graphics_SDK_${SGXPV}"
>
> # Logic to unpack installjammer file
> -TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
> +TI_BIN_UNPK_CMDS="Y:workdir"
> +TI_BIN_UNPK_WDEXT = "/Graphics_SDK_${SGXPV}"
> require ../ti/ti-eula-unpack.inc
>
> BINLOCATION ?= "${S}/gfx_rel"
> diff --git a/recipes/powervr-drivers/omap3-sgx-modules_1.6.16.3977.bb b/recip
> index 216b3ae..be4b7a1 100644
> --- a/recipes/powervr-drivers/omap3-sgx-modules_1.6.16.3977.bb
> +++ b/recipes/powervr-drivers/omap3-sgx-modules_1.6.16.3977.bb
> @@ -5,7 +5,8 @@ LICENSE = "GPLv2"
> # http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/
> # see libgles-omap3.inc for detailed installation instructions
>
> -TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
> +TI_BIN_UNPK_CMDS="Y:workdir:"
> +TI_BIN_UNPK_WDEXT = "/Graphics_SDK_${SGXPV}"
> require ../ti/ti-eula-unpack.inc
>
> SGXPV = "4_03_00_02"
> diff --git a/recipes/ti/ti-eula-unpack.inc b/recipes/ti/ti-eula-unpack.inc
> index 3b79c24..82ea785 100644
> --- a/recipes/ti/ti-eula-unpack.inc
> +++ b/recipes/ti/ti-eula-unpack.inc
> @@ -53,7 +53,7 @@ python ti_bin_do_unpack() {
> wdext = bb.data.getVar('TI_BIN_UNPK_WDEXT', localdata)
> wdext = bb.data.expand(wdext, localdata)
> cmd = workdir+wdext
> - print>>f, "%s\n" % cmd
> + print>>f, "%s" % cmd
> f.close()
>
> # Expand the tarball that was created if required
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
2011-09-24 10:45 ` Gary Thomas
@ 2011-09-24 18:24 ` ibrahim demir
2011-09-28 14:58 ` Michael Poole
1 sibling, 0 replies; 15+ messages in thread
From: ibrahim demir @ 2011-09-24 18:24 UTC (permalink / raw)
To: openembedded-devel
Actually i copy them from /opt/ti manually and paste them where they must be.. And i can basically say: no it is not known and it is not easy problem to fix if you are beginner at both bitbake and openembedded. There was no-answer for this situation. but i added a reply to a forum which has the same problem with me and waiting for the reply..
On 2011-09-23 14:46, Michael Poole wrote:
> On Fri, Sep 23, 2011 at 6:47 AM, Gary Thomas wrote:
>> Check to make sure that you don't have write permission to /opt
>> If you have write permission in the directory /opt, the installer
>> fails to put the tools where they belong in your OE build.
>
> Is it generally known that this limitation is due to a bug in
> ti-eula-unpack.inc?� (Python's print automatically adds a newline,
> which the code's author apparently did not expect.)� My local repo has
> these changes to allow in-tree installs by users with write access to
> /opt; please pardon Gmail's mangling of leading whitespace:
>I don't know if this is a generally known fact; it should be, I reported it to
>this list more than a year ago and was basically ignored [actually told I just
>shouldn't have write access to /opt so the issue was my own fault...]
>Does the unpack work with your patches if /opt is not writeable?
>
> diff --git a/recipes/powervr-drivers/libgles-omap3.inc b/recipes/powervr-driv
> index ab4b248..5acc4da 100644
> --- a/recipes/powervr-drivers/libgles-omap3.inc
> +++ b/recipes/powervr-drivers/libgles-omap3.inc
> @@ -19,7 +19,8 @@ SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sd
>� S = "${WORKDIR}/OMAP35x_Graphics_SDK_${SGXPV}"
>
>� # Logic to unpack installjammer file
> -TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
> +TI_BIN_UNPK_CMDS="Y:workdir"
> +TI_BIN_UNPK_WDEXT = "/Graphics_SDK_${SGXPV}"
>� require ../ti/ti-eula-unpack.inc
>
>� BINLOCATION ?= "${S}/gfx_rel"
> diff --git a/recipes/powervr-drivers/omap3-sgx-modules_1.6.16.3977.bb b/recip
> index 216b3ae..be4b7a1 100644
> --- a/recipes/powervr-drivers/omap3-sgx-modules_1.6.16.3977.bb
> +++ b/recipes/powervr-drivers/omap3-sgx-modules_1.6.16.3977.bb
> @@ -5,7 +5,8 @@ LICENSE = "GPLv2"
>� # http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/
>� # see libgles-omap3.inc for detailed installation instructions
>
> -TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
> +TI_BIN_UNPK_CMDS="Y:workdir:"
> +TI_BIN_UNPK_WDEXT = "/Graphics_SDK_${SGXPV}"
>� require ../ti/ti-eula-unpack.inc
>
>� SGXPV = "4_03_00_02"
> diff --git a/recipes/ti/ti-eula-unpack.inc b/recipes/ti/ti-eula-unpack.inc
> index 3b79c24..82ea785 100644
> --- a/recipes/ti/ti-eula-unpack.inc
> +++ b/recipes/ti/ti-eula-unpack.inc
> @@ -53,7 +53,7 @@ python ti_bin_do_unpack() {
>� � � � � � � wdext = bb.data.getVar('TI_BIN_UNPK_WDEXT', localdata)
>� � � � � � � wdext = bb.data.expand(wdext, localdata)
>� � � � � � � cmd = workdir+wdext
> -� � � � print>>f, "%s\n" % cmd
> +� � � � print>>f, "%s" % cmd
>� � � f.close()
>
>� � � # Expand the tarball that was created if required
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
--
------------------------------------------------------------
Gary Thomas� � � � � � � � |� Consulting for the
MLB Associates� � � � � � � |� � Embedded world
------------------------------------------------------------
_______________________________________________
Openembedded-devel mailing list
Openembedded-devel@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
From schnitzeltony@gmx.de Sun Sep 25 15:08:24 2011
Received: from mailout-de.gmx.net ([213.165.64.23])
by linuxtogo.org with smtp (Exim 4.72)
(envelope-from <schnitzeltony@gmx.de>) id 1R7oRU-0007Ve-QU
for openembedded-devel@lists.openembedded.org;
Sun, 25 Sep 2011 15:08:24 +0200
Received: (qmail invoked by alias); 25 Sep 2011 13:03:01 -0000
Received: from p5B0A37B6.dip.t-dialin.net (EHLO localhost.localdomain)
[91.10.55.182]
by mail.gmx.net (mp007) with SMTP; 25 Sep 2011 15:03:01 +0200
X-Authenticated: #62780362
X-Provags-ID: V01U2FsdGVkX18lYuUb6A8l1gMi7YdWdI8ld8OuLO0KHq0UdVHRid
AUApxFq1AtOJ/S
From: Andreas
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
2011-09-24 10:45 ` Gary Thomas
2011-09-24 18:24 ` ibrahim demir
@ 2011-09-28 14:58 ` Michael Poole
2011-09-28 15:08 ` Gary Thomas
1 sibling, 1 reply; 15+ messages in thread
From: Michael Poole @ 2011-09-28 14:58 UTC (permalink / raw)
To: Gary Thomas; +Cc: openembedded-devel
On Sat, Sep 24, 2011 at 6:45 AM, Gary Thomas wrote:
> On 2011-09-23 14:46, Michael Poole wrote:
>>
>> On Fri, Sep 23, 2011 at 6:47 AM, Gary Thomas wrote:
>>>
>>> Check to make sure that you don't have write permission to /opt
>>> If you have write permission in the directory /opt, the installer
>>> fails to put the tools where they belong in your OE build.
>>
>> Is it generally known that this limitation is due to a bug in
>> ti-eula-unpack.inc? (Python's print automatically adds a newline,
>> which the code's author apparently did not expect.) My local repo has
>> these changes to allow in-tree installs by users with write access to
>> /opt; please pardon Gmail's mangling of leading whitespace:
>
> I don't know if this is a generally known fact; it should be, I reported it
> to
> this list more than a year ago and was basically ignored [actually told I
> just
> shouldn't have write access to /opt so the issue was my own fault...]
>
> Does the unpack work with your patches if /opt is not writeable?
Yes, it does. (It took a few days for me to find time to do a clean
rebuild on a system where I didn't need write access to /opt.)
Michael Poole
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
2011-09-28 14:58 ` Michael Poole
@ 2011-09-28 15:08 ` Gary Thomas
2011-09-28 15:38 ` Michael Poole
0 siblings, 1 reply; 15+ messages in thread
From: Gary Thomas @ 2011-09-28 15:08 UTC (permalink / raw)
To: Michael Poole; +Cc: openembedded-devel
On 2011-09-28 08:58, Michael Poole wrote:
> On Sat, Sep 24, 2011 at 6:45 AM, Gary Thomas wrote:
>> On 2011-09-23 14:46, Michael Poole wrote:
>>>
>>> On Fri, Sep 23, 2011 at 6:47 AM, Gary Thomas wrote:
>>>>
>>>> Check to make sure that you don't have write permission to /opt
>>>> If you have write permission in the directory /opt, the installer
>>>> fails to put the tools where they belong in your OE build.
>>>
>>> Is it generally known that this limitation is due to a bug in
>>> ti-eula-unpack.inc? (Python's print automatically adds a newline,
>>> which the code's author apparently did not expect.) My local repo has
>>> these changes to allow in-tree installs by users with write access to
>>> /opt; please pardon Gmail's mangling of leading whitespace:
>>
>> I don't know if this is a generally known fact; it should be, I reported it
>> to
>> this list more than a year ago and was basically ignored [actually told I
>> just
>> shouldn't have write access to /opt so the issue was my own fault...]
>>
>> Does the unpack work with your patches if /opt is not writeable?
>
> Yes, it does. (It took a few days for me to find time to do a clean
> rebuild on a system where I didn't need write access to /opt.)
Thanks for checking.
Will you push these changes into meta-texasinstruments (please)?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
2011-09-28 15:08 ` Gary Thomas
@ 2011-09-28 15:38 ` Michael Poole
0 siblings, 0 replies; 15+ messages in thread
From: Michael Poole @ 2011-09-28 15:38 UTC (permalink / raw)
To: Gary Thomas; +Cc: openembedded-devel
On Wed, Sep 28, 2011 at 11:08 AM, Gary Thomas wrote:
> On 2011-09-28 08:58, Michael Poole wrote:
>>
>> On Sat, Sep 24, 2011 at 6:45 AM, Gary Thomas wrote:
>>>
>>> On 2011-09-23 14:46, Michael Poole wrote:
>>>>
>>>> On Fri, Sep 23, 2011 at 6:47 AM, Gary Thomas wrote:
>>>>>
>>>>> Check to make sure that you don't have write permission to /opt
>>>>> If you have write permission in the directory /opt, the installer
>>>>> fails to put the tools where they belong in your OE build.
>>>>
>>>> Is it generally known that this limitation is due to a bug in
>>>> ti-eula-unpack.inc? (Python's print automatically adds a newline,
>>>> which the code's author apparently did not expect.) My local repo has
>>>> these changes to allow in-tree installs by users with write access to
>>>> /opt; please pardon Gmail's mangling of leading whitespace:
>>>
>>> I don't know if this is a generally known fact; it should be, I reported
>>> it
>>> to
>>> this list more than a year ago and was basically ignored [actually told I
>>> just
>>> shouldn't have write access to /opt so the issue was my own fault...]
>>>
>>> Does the unpack work with your patches if /opt is not writeable?
>>
>> Yes, it does. (It took a few days for me to find time to do a clean
>> rebuild on a system where I didn't need write access to /opt.)
>
> Thanks for checking.
>
> Will you push these changes into meta-texasinstruments (please)?
Yes, I can check it against that and submit a patch. I have been
using OE-classic to date, so it might take a bit for me to get that
build right.
Michael Poole
^ permalink raw reply [flat|nested] 15+ messages in thread
* ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
@ 2011-09-23 8:39 ibrahim demir
0 siblings, 0 replies; 15+ messages in thread
From: ibrahim demir @ 2011-09-23 8:39 UTC (permalink / raw)
To: openembedded-devel
Dear developers,
I have a problem at installing ti codec engine:�
(command i entered is: "# bitbake ti-codec-engine")
*********************************************************************************************************
| make[2]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/drv'
| [DRV � � � � � � � � ] ------- INCLUDES -----------------------------------
| [DRV � � � � � � � � ] ------- DIRS ------------------ INCLUDE ------------
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/drv/_dsplink.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/drv/_dsplink.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/drv/DspBios/shm_drv.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/drv/DspBios/shm_drv.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| make[2]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/drv'
| make[1]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base'
| make -f Makefile -C pools � includes
| make[1]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/pools'
| [POOLS � � � � � � � ] ------- INCLUDES -----------------------------------
| [POOLS � � � � � � � ] ------- DIRS ------------------ INCLUDE ------------
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/pools/dsplinkpool.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/pools/dsplinkpool.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/pools/_buf_pool.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/pools/_buf_pool.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/pools/DspBios/_sma_pool.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/pools/DspBios/_sma_pool.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| make[1]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/pools'
| make -f Makefile -C mpcs � includes
| make[1]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/mpcs'
| [MPCS � � � � � � � �] ------- INCLUDES -----------------------------------
| [MPCS � � � � � � � �] ------- DIRS ------------------ INCLUDE ------------
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/mpcs/_mpcs.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/mpcs/_mpcs.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| make[1]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/mpcs'
| make -f Makefile -C mplist � includes
| make[1]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/mplist'
| [MPLIST � � � � � � �] ------- INCLUDES -----------------------------------
| [MPLIST � � � � � � �] ------- DIRS ------------------ INCLUDE ------------
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/mplist/_mplist.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/mplist/_mplist.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| make[1]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/mplist'
| make -f Makefile -C msg � includes
| make[1]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/msg'
| [MQT � � � � � � � � ] ------- INCLUDES -----------------------------------
| [MQT � � � � � � � � ] ------- DIRS ------------------ INCLUDE ------------
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/msg/dsplinkmqt.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/msg/dsplinkmqt.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/msg/DspBios/_zcpy_mqt.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/msg/DspBios/_zcpy_mqt.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| make[1]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/msg'
| make -f Makefile -C data � includes
| make[1]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/data'
| [DATA � � � � � � � �] ------- INCLUDES -----------------------------------
| [DATA � � � � � � � �] ------- DIRS ------------------ INCLUDE ------------
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/data/dsplinkdata.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/data/dsplinkdata.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/data/DspBios//_zcpy_data.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/data/DspBios//_zcpy_data.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| make[1]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/data'
| make -f Makefile -C notify � includes
| make[1]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/notify'
| [NOTIFY � � � � � � �] ------- INCLUDES -----------------------------------
| [NOTIFY � � � � � � �] ------- DIRS ------------------ INCLUDE ------------
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/notify/_notify.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/notify/_notify.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| make[1]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/notify'
| make -f Makefile -C ringio � includes
| make[1]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/ringio'
| [RINGIO � � � � � � �] ------- INCLUDES -----------------------------------
| [RINGIO � � � � � � �] ------- DIRS ------------------ INCLUDE ------------
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/ringio/_ringio.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE/. >/dev/null
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal"
| cp /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/ringio/_ringio.h /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/export/INCLUDE/DspBios/OMAP3530/internal �>/dev/null
| make[1]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/ringio'
|�
| [SRC � � � � � � � � ] ======= OBJECTS =============== DEBUG ==============
| make -f Makefile -C base � objdeb
| make[1]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base'
|�
| [BASE � � � � � � � �] ======= OBJECTS =============== DEBUG ==============
| make -f Makefile -C gen � objdeb
| make[2]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/gen'
| [GEN � � � � � � � � ] ------- DIRS ------------------ DEBUG --------------
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/GEN/OBJ/DEBUG" "" "mkdir -p /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/GEN/OBJ/DEBUG"
| [GEN � � � � � � � � ] ------- OBJECT ---------------- DEBUG --------------
| /usr//bin/perl /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/bin/runif.pl LINUX "exist /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/gen" "make -C /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/gen -f �/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/make/DspBios/C64XX/compile.mk objdeb VERBOSE=0" ""
| make[3]: Entering directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/gen'
| echo Compiling failure.c...
| Compiling failure.c...
| /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/sysroots/beagleboard-angstrom-linux-gnueabi/usr/share/ti/ti-cgt6x-tree/bin/cl6x -g -d"_DEBUG" --no_compress -dMAX_DSPS=1 -dMAX_PROCESSORS=2 -dID_GPP=1 -dOMAP3530 -dPROC_COMPONENT -dPOOL_COMPONENT -dNOTIFY_COMPONENT -dMPCS_COMPONENT -dRINGIO_COMPONENT -dMPLIST_COMPONENT -dMSGQ_COMPONENT -dMSGQ_ZCPY_LINK -dCHNL_COMPONENT -dCHNL_ZCPY_LINK -dZCPY_LINK -dPROCID=0 -dOMAP3530 -dOMAP3530_INTERFACE=SHMEM_INTERFACE -dPHYINTERFACE=SHMEM_INTERFACE -dDSP_SWI_MODE -I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/inc
-I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/inc/DspBios -I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/inc/DspBios/5.XX -I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/inc/DspBios/5.XX/OMAP3530 -I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/inc/OMAP3530
-I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/inc/C64XX -I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/gen -I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/gen/DspBios -I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/gen/DspBios/
-I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/sysroots/beagleboard-angstrom-linux-gnueabi/usr/share/ti/ti-dspbios-tree/packages/ti/bios/include -I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/sysroots/beagleboard-angstrom-linux-gnueabi/usr/share/ti/ti-cgt6x-tree/include -I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/sysroots/beagleboard-angstrom-linux-gnueabi/usr/share/ti/ti-dspbios-tree/packages/ti/rtdx/include/c6000 -I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/sysroots/beagleboard-angstrom-linux-gnueabi/usr/share/ti/ti-dspbios-tree/packages/ti/psl/include
-I/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/INCLUDE -q -pdr -pdv -pden -ml3 -mv6400+ --disable:sploop � � -fr"/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/BUILD/OMAP3530_0/GEN/OBJ/DEBUG" failure.c
| /bin/sh: /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/sysroots/beagleboard-angstrom-linux-gnueabi/usr/share/ti/ti-cgt6x-tree/bin/cl6x: No such file or directory
| make[3]: *** [failure.c.deb] Error 127
| make[3]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/gen'
| make[2]: *** [objdeb] Error 2
| make[2]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base/gen'
| make[1]: *** [gen.objdeb] Error 2
| make[1]: Leaving directory `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/dsplink_linux_1_65_00_03/dsplink/dsp/src/base'
| make: *** [base.objdeb] Error 2
NOTE: package ti-dsplink-1_1_65_00_03-r100i: task do_compile: Failed
ERROR: Function 'do_compile' failed (see /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-dsplink-1_1_65_00_03-r100i/temp/log.do_compile.19319 for further information)
ERROR: Task 251 (/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-dsplink_1.65.00.03.bb, do_compile) failed with exit code '1'
ERROR: '/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-dsplink_1.65.00.03.bb' failed
***************************************************************************************
My system has Ubuntu 11.04, and i am using b7 beagleboard. My goal is to compile my opencv project for work in beagle and i follow that steps:�http://code.google.com/p/opencv-dsp-acceleration/wiki/Instruction_For_Building_Examples. I had done step 1 and have stacked at step 2.
What is the problem in that case?
From juhsis@yahoo.com Fri Sep 23 11:45:09 2011
Received: from nm30-vm4.bullet.mail.ne1.yahoo.com ([98.138.91.190])
by linuxtogo.org with smtp (Exim 4.72)
(envelope-from <juhsis@yahoo.com>) id 1R72Jf-0000x4-V5
for openembedded-devel@lists.openembedded.org;
Fri, 23 Sep 2011 11:45:09 +0200
Received: from [98.138.90.55] by nm30.bullet.mail.ne1.yahoo.com with NNFMP;
23 Sep 2011 09:36:38 -0000
Received: from [98.138.89.165] by tm8.bullet.mail.ne1.yahoo.com with NNFMP;
23 Sep 2011 09:36:38 -0000
Received: from [127.0.0.1] by omp1021.mail.ne1.yahoo.com with NNFMP;
23 Sep 2011 09:36:38 -0000
X-Yahoo-Newman-Property: ymail-3
X-Yahoo-Newman-Id: 87799.63205.bm@omp1021.mail.ne1.yahoo.com
Received: (qmail 6872 invoked by uid 60001); 23 Sep 2011 09:36:38 -0000
DKIM-Signature: v
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
2011-09-21 15:04 ` Gary Thomas
2011-09-21 15:06 ` Graeme Gregory
@ 2011-09-21 15:51 ` Gary Thomas
1 sibling, 0 replies; 15+ messages in thread
From: Gary Thomas @ 2011-09-21 15:51 UTC (permalink / raw)
To: openembedded-devel
On 2011-09-21 09:04, Gary Thomas wrote:
> On 2011-09-21 08:37, ibrahim demir wrote:
>> Dear developers,
>>
>>
>> i have a problem at installing ti codec engine: http://pastebin.com/uU7etDYs . i downloaded ti_cgt_c6000_6.1.17_setup_linux_x86.bin and generated it's md5.
>>
>> in recipes/ti/...6.1.17.bb says md5 is : 41ee41cc74800b06705804f7ef901447. But when i calculate its md5, i get this: 5ee5c8e573ab0a1ba1249511d4a06c27. I download again and again
>> but the result of md5 was the same. Then i changed bb file to 5ee5c8e573ab0a1ba1249511d4a06c27. and run bitbake ti-codec-engine, but the result was: http://pastebin.com/1SCrtWvQ
>>
>> so in this case what is my problem, what should i do?
>
> Your download is damaged. How did you download it? Make sure you download
> files in binary mode only. Your file should match this:
> $ md5sum ti_cgt_c6000_6.1.17_setup_linux_x86.bin
> 41ee41cc74800b06705804f7ef901447 ti_cgt_c6000_6.1.17_setup_linux_x86.bin
> $ ls -l ti_cgt_c6000_6.1.17_setup_linux_x86.bin
> -rw-rw-r-- 1 gthomas gthomas 77374699 Mar 3 2011 ti_cgt_c6000_6.1.17_setup_linux_x86.bin
I see the problem - you have to manually make the md5 file (I made mine long ago...)
$ cd <where-you-download-your-sources>
$ md5sum ti_cgt_c6000_6.1.17_setup_linux_x86.bin >ti_cgt_c6000_6.1.17_setup_linux_x86.bin.md5
Odd that TI updated this file from the version I downloaded in March.
The only change are some whitespace differences in the LICENSE file...
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
2011-09-21 15:21 ` Gary Thomas
@ 2011-09-21 15:21 ` Graeme Gregory
0 siblings, 0 replies; 15+ messages in thread
From: Graeme Gregory @ 2011-09-21 15:21 UTC (permalink / raw)
To: Gary Thomas; +Cc: openembedded-devel
On 21/09/11 16:21, Gary Thomas wrote:
> On 2011-09-21 09:06, Graeme Gregory wrote:
>> On 21/09/11 16:04, Gary Thomas wrote:
>>> On 2011-09-21 08:37, ibrahim demir wrote:
>>>> Dear developers,
>>>>
>>>>
>>>> i have a problem at installing ti codec engine:
>>>> http://pastebin.com/uU7etDYs . i downloaded
>>>> ti_cgt_c6000_6.1.17_setup_linux_x86.bin and generated it's md5.
>>>>
>>>> in recipes/ti/...6.1.17.bb says md5 is :
>>>> 41ee41cc74800b06705804f7ef901447. But when i calculate its md5, i
>>>> get this: 5ee5c8e573ab0a1ba1249511d4a06c27. I download again and again
>>>> but the result of md5 was the same. Then i changed bb file to
>>>> 5ee5c8e573ab0a1ba1249511d4a06c27. and run bitbake ti-codec-engine,
>>>> but the result was: http://pastebin.com/1SCrtWvQ
>>>>
>>>> so in this case what is my problem, what should i do?
>>>
>>> Your download is damaged. How did you download it? Make sure you
>>> download
>>> files in binary mode only. Your file should match this:
>>> $ md5sum ti_cgt_c6000_6.1.17_setup_linux_x86.bin
>>> 41ee41cc74800b06705804f7ef901447
>>> ti_cgt_c6000_6.1.17_setup_linux_x86.bin
>>> $ ls -l ti_cgt_c6000_6.1.17_setup_linux_x86.bin
>>> -rw-rw-r-- 1 gthomas gthomas 77374699 Mar 3 2011
>>> ti_cgt_c6000_6.1.17_setup_linux_x86.bin
>>>
>> I dont think his download is damaged, I tested my download and my
>> md5sum matches his.
>
> The last error posted implies that it is - that binary file is a
> self-unpacking
> glob which is failing it's internal checksum.
>
> Did you try to run what you downloaded?
>
Yes, it displayed a requester to start the install process.
G
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
2011-09-21 15:06 ` Graeme Gregory
@ 2011-09-21 15:21 ` Gary Thomas
2011-09-21 15:21 ` Graeme Gregory
0 siblings, 1 reply; 15+ messages in thread
From: Gary Thomas @ 2011-09-21 15:21 UTC (permalink / raw)
To: openembedded-devel
On 2011-09-21 09:06, Graeme Gregory wrote:
> On 21/09/11 16:04, Gary Thomas wrote:
>> On 2011-09-21 08:37, ibrahim demir wrote:
>>> Dear developers,
>>>
>>>
>>> i have a problem at installing ti codec engine: http://pastebin.com/uU7etDYs . i downloaded ti_cgt_c6000_6.1.17_setup_linux_x86.bin and generated it's md5.
>>>
>>> in recipes/ti/...6.1.17.bb says md5 is : 41ee41cc74800b06705804f7ef901447. But when i calculate its md5, i get this: 5ee5c8e573ab0a1ba1249511d4a06c27. I download again and again
>>> but the result of md5 was the same. Then i changed bb file to 5ee5c8e573ab0a1ba1249511d4a06c27. and run bitbake ti-codec-engine, but the result was: http://pastebin.com/1SCrtWvQ
>>>
>>> so in this case what is my problem, what should i do?
>>
>> Your download is damaged. How did you download it? Make sure you download
>> files in binary mode only. Your file should match this:
>> $ md5sum ti_cgt_c6000_6.1.17_setup_linux_x86.bin
>> 41ee41cc74800b06705804f7ef901447 ti_cgt_c6000_6.1.17_setup_linux_x86.bin
>> $ ls -l ti_cgt_c6000_6.1.17_setup_linux_x86.bin
>> -rw-rw-r-- 1 gthomas gthomas 77374699 Mar 3 2011 ti_cgt_c6000_6.1.17_setup_linux_x86.bin
>>
> I dont think his download is damaged, I tested my download and my md5sum matches his.
The last error posted implies that it is - that binary file is a self-unpacking
glob which is failing it's internal checksum.
Did you try to run what you downloaded?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
2011-09-21 15:04 ` Gary Thomas
@ 2011-09-21 15:06 ` Graeme Gregory
2011-09-21 15:21 ` Gary Thomas
2011-09-21 15:51 ` Gary Thomas
1 sibling, 1 reply; 15+ messages in thread
From: Graeme Gregory @ 2011-09-21 15:06 UTC (permalink / raw)
To: openembedded-devel
On 21/09/11 16:04, Gary Thomas wrote:
> On 2011-09-21 08:37, ibrahim demir wrote:
>> Dear developers,
>>
>>
>> i have a problem at installing ti codec engine:
>> http://pastebin.com/uU7etDYs . i downloaded
>> ti_cgt_c6000_6.1.17_setup_linux_x86.bin and generated it's md5.
>>
>> in recipes/ti/...6.1.17.bb says md5 is :
>> 41ee41cc74800b06705804f7ef901447. But when i calculate its md5, i get
>> this: 5ee5c8e573ab0a1ba1249511d4a06c27. I download again and again
>> but the result of md5 was the same. Then i changed bb file to
>> 5ee5c8e573ab0a1ba1249511d4a06c27. and run bitbake ti-codec-engine,
>> but the result was: http://pastebin.com/1SCrtWvQ
>>
>> so in this case what is my problem, what should i do?
>
> Your download is damaged. How did you download it? Make sure you
> download
> files in binary mode only. Your file should match this:
> $ md5sum ti_cgt_c6000_6.1.17_setup_linux_x86.bin
> 41ee41cc74800b06705804f7ef901447
> ti_cgt_c6000_6.1.17_setup_linux_x86.bin
> $ ls -l ti_cgt_c6000_6.1.17_setup_linux_x86.bin
> -rw-rw-r-- 1 gthomas gthomas 77374699 Mar 3 2011
> ti_cgt_c6000_6.1.17_setup_linux_x86.bin
>
I dont think his download is damaged, I tested my download and my md5sum
matches his.
Graeme
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
2011-09-21 14:37 ibrahim demir
@ 2011-09-21 15:04 ` Gary Thomas
2011-09-21 15:06 ` Graeme Gregory
2011-09-21 15:51 ` Gary Thomas
0 siblings, 2 replies; 15+ messages in thread
From: Gary Thomas @ 2011-09-21 15:04 UTC (permalink / raw)
To: openembedded-devel
On 2011-09-21 08:37, ibrahim demir wrote:
> Dear developers,
>
>
> i have a problem at installing ti codec engine: http://pastebin.com/uU7etDYs . i downloaded ti_cgt_c6000_6.1.17_setup_linux_x86.bin and generated it's md5.
>
> in recipes/ti/...6.1.17.bb says md5 is : 41ee41cc74800b06705804f7ef901447. But when i calculate its md5, i get this: 5ee5c8e573ab0a1ba1249511d4a06c27. I download again and again but the result of md5 was the same. Then i changed bb file to 5ee5c8e573ab0a1ba1249511d4a06c27. and run bitbake ti-codec-engine, but the result was: http://pastebin.com/1SCrtWvQ
>
> so in this case what is my problem, what should i do?
Your download is damaged. How did you download it? Make sure you download
files in binary mode only. Your file should match this:
$ md5sum ti_cgt_c6000_6.1.17_setup_linux_x86.bin
41ee41cc74800b06705804f7ef901447 ti_cgt_c6000_6.1.17_setup_linux_x86.bin
$ ls -l ti_cgt_c6000_6.1.17_setup_linux_x86.bin
-rw-rw-r-- 1 gthomas gthomas 77374699 Mar 3 2011 ti_cgt_c6000_6.1.17_setup_linux_x86.bin
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
@ 2011-09-21 14:37 ibrahim demir
2011-09-21 15:04 ` Gary Thomas
0 siblings, 1 reply; 15+ messages in thread
From: ibrahim demir @ 2011-09-21 14:37 UTC (permalink / raw)
To: openembedded-devel
Dear developers,
i have a problem at installing ti codec engine:�http://pastebin.com/uU7etDYs�.�i downloaded ti_cgt_c6000_6.1.17_setup_linux_x86.bin�and generated it's md5.
in recipes/ti/...6.1.17.bb says md5 is : 41ee41cc74800b06705804f7ef901447. But when i calculate its md5, i get this: 5ee5c8e573ab0a1ba1249511d4a06c27. I download again and again but the result of md5 was the same. Then i changed bb file to 5ee5c8e573ab0a1ba1249511d4a06c27.�and run bitbake ti-codec-engine,�but the result was:�http://pastebin.com/1SCrtWvQ�
so in this case what is my problem, what should i do?
Kind Regards,
Ibrahim DEMIR
From paulepanter@users.sourceforge.net Wed Sep 21 16:56:45 2011
Received: from mail.gw90.de ([188.40.100.199])
by linuxtogo.org with esmtp (Exim 4.72)
(envelope-from <paulepanter@users.sourceforge.net>)
id 1R6OE9-0001jl-No for openembedded-devel@lists.openembedded.org;
Wed, 21 Sep 2011 16:56:45 +0200
Received: from f053045060.adsl.alicedsl.de ([78.53.45.60]
helo
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2011-09-28 16:48 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1316770597.99899.YahooMailNeo@web121512.mail.ne1.yahoo.com>
2011-09-23 10:47 ` ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine Gary Thomas
[not found] ` <1316776207.30918.YahooMailNeo@web121514.mail.ne1.yahoo.com>
2011-09-23 11:15 ` Gary Thomas
2011-09-23 14:16 ` ibrahim demir
[not found] ` <CAOU-OA+uKFYL4nJutdTHsUCYnGy9=NiYW65jGbRk76+GL6iocg@mail.gmail.com>
2011-09-24 10:45 ` Gary Thomas
2011-09-24 18:24 ` ibrahim demir
2011-09-28 14:58 ` Michael Poole
2011-09-28 15:08 ` Gary Thomas
2011-09-28 15:38 ` Michael Poole
2011-09-23 8:39 ibrahim demir
-- strict thread matches above, loose matches on Subject: below --
2011-09-21 14:37 ibrahim demir
2011-09-21 15:04 ` Gary Thomas
2011-09-21 15:06 ` Graeme Gregory
2011-09-21 15:21 ` Gary Thomas
2011-09-21 15:21 ` Graeme Gregory
2011-09-21 15:51 ` Gary Thomas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.