From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [Resend PATCH V3] mx31: provide readable WEIM CS accessor
Date: Fri, 30 Sep 2011 09:32:25 +0200 [thread overview]
Message-ID: <4E857089.2070508@denx.de> (raw)
In-Reply-To: <1317311103-1020-1-git-send-email-helmut.raiger@hale.at>
On 09/29/2011 05:45 PM, Helmut Raiger wrote:
> setup_weimcs() and some macros are added to support the setup
> for i.MX31 WEIM chip selects. As a compromise between verbosity
> and readability an ASCII-art'ish bit comment is used instead of
> bitfields.
> All i.MX31 boards have been patched to use this approach using a
> helper program to verify the changes.
>
> Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
> ---
> V2:
> added sys_proto.h for mx31
> introduced mxc_setup_weimcs(), which is SOC independent
> not inlined any more (codesize increased by 60-90 bytes)
> V3:
> modified register access according to the coding style
> ---
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
next prev parent reply other threads:[~2011-09-30 7:32 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-22 12:12 [U-Boot] mx31: Add board support for HALE TT-01 Helmut Raiger
2011-09-22 12:12 ` [U-Boot] [PATCH 1/2] mx31: define pins and init for UART2 and CSPI3 Helmut Raiger
2011-09-22 12:12 ` [U-Boot] [PATCH 2/2] TT-01: add basic board support for HALE TT-01 Helmut Raiger
2011-09-22 13:36 ` Fabio Estevam
2011-09-22 13:51 ` Stefano Babic
2011-10-06 13:07 ` Helmut Raiger
2011-10-06 13:27 ` Stefano Babic
2011-09-22 14:08 ` Wolfgang Denk
2011-09-28 12:48 ` [U-Boot] mx31: Approach for WEIM CS accessors Helmut Raiger
2011-09-28 12:48 ` [U-Boot] [PATCH] mx31: provide readable WEIM CS accessor Helmut Raiger
2011-09-28 15:14 ` Stefano Babic
2011-09-29 6:32 ` Helmut Raiger
2011-09-29 6:59 ` Stefano Babic
2011-09-29 7:30 ` Helmut Raiger
2011-09-29 9:17 ` Stefano Babic
2011-09-29 12:19 ` [U-Boot] [PATCH V2] " Helmut Raiger
2011-09-29 12:25 ` [U-Boot] [Resend PATCH V2 (forgot generic.c)] " Helmut Raiger
2011-09-29 13:21 ` Stefano Babic
2011-09-29 14:01 ` Helmut Raiger
2011-09-29 14:16 ` Stefano Babic
2011-09-29 14:55 ` [U-Boot] [PATCH V3] " Helmut Raiger
2011-09-29 15:11 ` Helmut Raiger
2011-09-29 15:19 ` Stefano Babic
2011-09-29 15:45 ` [U-Boot] [Resend PATCH " Helmut Raiger
2011-09-30 7:32 ` Stefano Babic [this message]
2011-10-05 11:51 ` Stefano Babic
2011-09-29 17:32 ` [U-Boot] [Resend PATCH V2 (forgot generic.c)] " Wolfgang Denk
2011-10-14 8:05 ` [U-Boot] [PATCH V2 1/3] mx31: define pins and init for UART2 and CSPI3 Helmut Raiger
2011-10-14 8:05 ` [U-Boot] [PATCH V2 2/3] mx31: add ESD control registers Helmut Raiger
2011-10-14 13:29 ` Stefano Babic
2011-10-14 8:05 ` [U-Boot] [PATCH V2 3/3] mx31: Add board support for HALE TT-01 Helmut Raiger
2011-10-14 11:04 ` Stefano Babic
2011-10-14 21:14 ` Wolfgang Denk
2011-10-15 5:40 ` stefano babic
2011-10-15 8:52 ` Wolfgang Denk
2011-10-15 11:11 ` Stefano Babic
2011-10-14 10:04 ` [U-Boot] [PATCH V2 1/3] mx31: define pins and init for UART2 and CSPI3 Stefano Babic
2011-10-27 11:31 ` [U-Boot] [PATCH V3 " Helmut Raiger
2011-10-27 11:31 ` [U-Boot] [PATCH V3 2/3] mx31: add ESD control registers Helmut Raiger
2011-10-27 12:49 ` Stefano Babic
2011-10-28 8:28 ` Stefano Babic
2011-10-27 11:31 ` [U-Boot] [PATCH V3 3/3] mx31: Add board support for HALE TT-01 Helmut Raiger
2011-10-27 12:59 ` Stefano Babic
2011-10-27 12:49 ` [U-Boot] [PATCH V3 1/3] mx31: define pins and init for UART2 and CSPI3 Stefano Babic
2011-10-28 8:28 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E857089.2070508@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.