* [U-Boot] [PULL] u-boot-pxa / master
@ 2011-11-12 2:44 Marek Vasut
2011-11-15 21:25 ` Albert ARIBAUD
0 siblings, 1 reply; 12+ messages in thread
From: Marek Vasut @ 2011-11-12 2:44 UTC (permalink / raw)
To: u-boot
Hi Albert,
I chose a few significant patches that should make it to .12.
The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783:
da850: add new config file for AM18xx (2011-11-10 16:30:41 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git master
Marek Vasut (6):
PXA: Drop csb226 and innokom boards (unmaintained)
PXA: Cleanup serial_pxa
PXA: vpac270: Enable the new generic MMC driver
OneNAND: Add simple OneNAND SPL
GCC4.6: Fix common/usb.c on xscale
GCC4.6: Squash warnings in onenand_base.c
MAINTAINERS | 5 -
arch/arm/include/asm/arch-pxa/pxa-regs.h | 111 -------
arch/arm/include/asm/arch-pxa/regs-uart.h | 109 ++++++
board/csb226/Makefile | 43 ---
board/csb226/csb226.c | 166 ----------
board/csb226/flash.c | 368 ---------------------
board/innokom/Makefile | 43 ---
board/innokom/flash.c | 421 ------------------------
board/innokom/innokom.c | 190 -----------
board/vpac270/vpac270.c | 9 +
boards.cfg | 2 -
common/usb.c | 13 +-
drivers/mtd/onenand/Makefile | 4 +
drivers/mtd/onenand/onenand_base.c | 18 +-
drivers/mtd/onenand/onenand_spl.c | 146 +++++++++
drivers/serial/serial_pxa.c | 464 +++++++++++----------------
include/configs/csb226.h | 506 ----------------------------
include/configs/innokom.h | 507 -----------------------------
include/configs/vpac270.h | 3 +-
include/onenand_uboot.h | 3 +
spl/Makefile | 1 +
21 files changed, 478 insertions(+), 2654 deletions(-)
create mode 100644 arch/arm/include/asm/arch-pxa/regs-uart.h
delete mode 100644 board/csb226/Makefile
delete mode 100644 board/csb226/csb226.c
delete mode 100644 board/csb226/flash.c
delete mode 100644 board/innokom/Makefile
delete mode 100644 board/innokom/flash.c
delete mode 100644 board/innokom/innokom.c
create mode 100644 drivers/mtd/onenand/onenand_spl.c
delete mode 100644 include/configs/csb226.h
delete mode 100644 include/configs/innokom.h
^ permalink raw reply [flat|nested] 12+ messages in thread* [U-Boot] [PULL] u-boot-pxa / master
2011-11-12 2:44 [U-Boot] [PULL] u-boot-pxa / master Marek Vasut
@ 2011-11-15 21:25 ` Albert ARIBAUD
0 siblings, 0 replies; 12+ messages in thread
From: Albert ARIBAUD @ 2011-11-15 21:25 UTC (permalink / raw)
To: u-boot
Hi Marek,
Le 12/11/2011 03:44, Marek Vasut a ?crit :
> Hi Albert,
>
> I chose a few significant patches that should make it to .12.
>
> The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783:
>
> da850: add new config file for AM18xx (2011-11-10 16:30:41 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-pxa.git master
>
> Marek Vasut (6):
> PXA: Drop csb226 and innokom boards (unmaintained)
> PXA: Cleanup serial_pxa
> PXA: vpac270: Enable the new generic MMC driver
> OneNAND: Add simple OneNAND SPL
> GCC4.6: Fix common/usb.c on xscale
> GCC4.6: Squash warnings in onenand_base.c
>
> MAINTAINERS | 5 -
> arch/arm/include/asm/arch-pxa/pxa-regs.h | 111 -------
> arch/arm/include/asm/arch-pxa/regs-uart.h | 109 ++++++
> board/csb226/Makefile | 43 ---
> board/csb226/csb226.c | 166 ----------
> board/csb226/flash.c | 368 ---------------------
> board/innokom/Makefile | 43 ---
> board/innokom/flash.c | 421 ------------------------
> board/innokom/innokom.c | 190 -----------
> board/vpac270/vpac270.c | 9 +
> boards.cfg | 2 -
> common/usb.c | 13 +-
> drivers/mtd/onenand/Makefile | 4 +
> drivers/mtd/onenand/onenand_base.c | 18 +-
> drivers/mtd/onenand/onenand_spl.c | 146 +++++++++
> drivers/serial/serial_pxa.c | 464 +++++++++++----------------
> include/configs/csb226.h | 506 ----------------------------
> include/configs/innokom.h | 507 -----------------------------
> include/configs/vpac270.h | 3 +-
> include/onenand_uboot.h | 3 +
> spl/Makefile | 1 +
> 21 files changed, 478 insertions(+), 2654 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-pxa/regs-uart.h
> delete mode 100644 board/csb226/Makefile
> delete mode 100644 board/csb226/csb226.c
> delete mode 100644 board/csb226/flash.c
> delete mode 100644 board/innokom/Makefile
> delete mode 100644 board/innokom/flash.c
> delete mode 100644 board/innokom/innokom.c
> create mode 100644 drivers/mtd/onenand/onenand_spl.c
> delete mode 100644 include/configs/csb226.h
> delete mode 100644 include/configs/innokom.h
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PULL] u-boot-pxa / master
@ 2011-11-25 18:56 Marek Vasut
2011-11-25 19:46 ` Albert ARIBAUD
0 siblings, 1 reply; 12+ messages in thread
From: Marek Vasut @ 2011-11-25 18:56 UTC (permalink / raw)
To: u-boot
The following changes since commit 19cdfd3e84bff108febb127b598ac3f1634c768c:
Ethernut 5 board support (2011-11-21 17:51:06 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git master
Marek Vasut (4):
PXA: Drop CERF250 board
PXA: Drop CRADLE board
PXA: Drop PLEB2 board
PXA: Drop XM250 board
MAINTAINERS | 5 -
board/cerf250/Makefile | 43 ---
board/cerf250/cerf250.c | 85 -----
board/cerf250/flash.c | 429 ------------------------
board/cradle/Makefile | 43 ---
board/cradle/cradle.c | 236 -------------
board/cradle/flash.c | 361 --------------------
board/pleb2/Makefile | 44 ---
board/pleb2/flash.c | 814 ---------------------------------------------
board/pleb2/pleb2.c | 71 ----
board/xm250/Makefile | 43 ---
board/xm250/flash.c | 535 -----------------------------
board/xm250/xm250.c | 95 ------
boards.cfg | 4 -
doc/README.scrapyard | 4 +
include/configs/cerf250.h | 229 -------------
include/configs/cradle.h | 358 --------------------
include/configs/pleb2.h | 266 ---------------
include/configs/xm250.h | 369 --------------------
19 files changed, 4 insertions(+), 4030 deletions(-)
delete mode 100644 board/cerf250/Makefile
delete mode 100644 board/cerf250/cerf250.c
delete mode 100644 board/cerf250/flash.c
delete mode 100644 board/cradle/Makefile
delete mode 100644 board/cradle/cradle.c
delete mode 100644 board/cradle/flash.c
delete mode 100644 board/pleb2/Makefile
delete mode 100644 board/pleb2/flash.c
delete mode 100644 board/pleb2/pleb2.c
delete mode 100644 board/xm250/Makefile
delete mode 100644 board/xm250/flash.c
delete mode 100644 board/xm250/xm250.c
delete mode 100644 include/configs/cerf250.h
delete mode 100644 include/configs/cradle.h
delete mode 100644 include/configs/pleb2.h
delete mode 100644 include/configs/xm250.h
^ permalink raw reply [flat|nested] 12+ messages in thread* [U-Boot] [PULL] u-boot-pxa / master
2011-11-25 18:56 Marek Vasut
@ 2011-11-25 19:46 ` Albert ARIBAUD
2011-11-25 19:50 ` Albert ARIBAUD
0 siblings, 1 reply; 12+ messages in thread
From: Albert ARIBAUD @ 2011-11-25 19:46 UTC (permalink / raw)
To: u-boot
Hi Marek,
Le 25/11/2011 19:56, Marek Vasut a ?crit :
> The following changes since commit 19cdfd3e84bff108febb127b598ac3f1634c768c:
>
> Ethernut 5 board support (2011-11-21 17:51:06 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-pxa.git master
>
> Marek Vasut (4):
> PXA: Drop CERF250 board
> PXA: Drop CRADLE board
> PXA: Drop PLEB2 board
> PXA: Drop XM250 board
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PULL] u-boot-pxa / master
2011-11-25 19:46 ` Albert ARIBAUD
@ 2011-11-25 19:50 ` Albert ARIBAUD
2011-11-25 20:28 ` Marek Vasut
2011-11-25 20:42 ` Anatolij Gustschin
0 siblings, 2 replies; 12+ messages in thread
From: Albert ARIBAUD @ 2011-11-25 19:50 UTC (permalink / raw)
To: u-boot
Hi Marek, Anatolij,
Le 25/11/2011 20:46, Albert ARIBAUD a ?crit :
> Hi Marek,
>
> Le 25/11/2011 19:56, Marek Vasut a ?crit :
>> The following changes since commit
>> 19cdfd3e84bff108febb127b598ac3f1634c768c:
>>
>> Ethernut 5 board support (2011-11-21 17:51:06 +0100)
>>
>> are available in the git repository at:
>> git://git.denx.de/u-boot-pxa.git master
>>
>> Marek Vasut (4):
>> PXA: Drop CERF250 board
>> PXA: Drop CRADLE board
>> PXA: Drop PLEB2 board
>> PXA: Drop XM250 board
>
> Applied to u-boot-arm/master, thanks!
Wait... Anatolij submitted patches to add machine ID back to these boards.
Anatolij, do you intend to take maintainership of these boards ?
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PULL] u-boot-pxa / master
2011-11-25 19:50 ` Albert ARIBAUD
@ 2011-11-25 20:28 ` Marek Vasut
2011-11-25 20:42 ` Anatolij Gustschin
1 sibling, 0 replies; 12+ messages in thread
From: Marek Vasut @ 2011-11-25 20:28 UTC (permalink / raw)
To: u-boot
> Hi Marek, Anatolij,
>
> Le 25/11/2011 20:46, Albert ARIBAUD a ?crit :
> > Hi Marek,
> >
> > Le 25/11/2011 19:56, Marek Vasut a ?crit :
> >> The following changes since commit
> >> 19cdfd3e84bff108febb127b598ac3f1634c768c:
> >>
> >> Ethernut 5 board support (2011-11-21 17:51:06 +0100)
> >>
> >> are available in the git repository at:
> >> git://git.denx.de/u-boot-pxa.git master
> >>
> >> Marek Vasut (4):
> >> PXA: Drop CERF250 board
> >> PXA: Drop CRADLE board
> >> PXA: Drop PLEB2 board
> >> PXA: Drop XM250 board
> >
> > Applied to u-boot-arm/master, thanks!
>
> Wait... Anatolij submitted patches to add machine ID back to these boards.
>
> Anatolij, do you intend to take maintainership of these boards ?
>
> Amicalement,
I saw the patches and replied to these. I'd take much more than to add the
machine ID back to consider there "maintained".
M
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PULL] u-boot-pxa / master
2011-11-25 19:50 ` Albert ARIBAUD
2011-11-25 20:28 ` Marek Vasut
@ 2011-11-25 20:42 ` Anatolij Gustschin
2011-11-25 21:13 ` Marek Vasut
1 sibling, 1 reply; 12+ messages in thread
From: Anatolij Gustschin @ 2011-11-25 20:42 UTC (permalink / raw)
To: u-boot
Hi Albert,
On Fri, 25 Nov 2011 20:50:55 +0100
Albert ARIBAUD <albert.u.boot@aribaud.net> wrote:
> Hi Marek, Anatolij,
>
> Le 25/11/2011 20:46, Albert ARIBAUD a ?crit :
> > Hi Marek,
> >
> > Le 25/11/2011 19:56, Marek Vasut a ?crit :
> >> The following changes since commit
> >> 19cdfd3e84bff108febb127b598ac3f1634c768c:
> >>
> >> Ethernut 5 board support (2011-11-21 17:51:06 +0100)
> >>
> >> are available in the git repository at:
> >> git://git.denx.de/u-boot-pxa.git master
> >>
> >> Marek Vasut (4):
> >> PXA: Drop CERF250 board
> >> PXA: Drop CRADLE board
> >> PXA: Drop PLEB2 board
> >> PXA: Drop XM250 board
> >
> > Applied to u-boot-arm/master, thanks!
>
> Wait... Anatolij submitted patches to add machine ID back to these boards.
>
> Anatolij, do you intend to take maintainership of these boards ?
I do not have any of these boards, so I can't really maintain
the code for them. Also I'm not sure whether the current U-Boot
runs on these boards (I've seen patches to fix PXA relocation [1]).
Does it make sense to keep them?
Thanks,
Anatolij
[1] http://patchwork.ozlabs.org/patch/120240
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PULL] u-boot-pxa / master
2011-11-25 20:42 ` Anatolij Gustschin
@ 2011-11-25 21:13 ` Marek Vasut
2011-11-25 21:29 ` Albert ARIBAUD
2011-12-02 10:11 ` Marek Vasut
0 siblings, 2 replies; 12+ messages in thread
From: Marek Vasut @ 2011-11-25 21:13 UTC (permalink / raw)
To: u-boot
> Hi Albert,
>
> On Fri, 25 Nov 2011 20:50:55 +0100
>
> Albert ARIBAUD <albert.u.boot@aribaud.net> wrote:
> > Hi Marek, Anatolij,
> >
> > Le 25/11/2011 20:46, Albert ARIBAUD a ?crit :
> > > Hi Marek,
> > >
> > > Le 25/11/2011 19:56, Marek Vasut a ?crit :
> > >> The following changes since commit
> > >> 19cdfd3e84bff108febb127b598ac3f1634c768c:
> > >>
> > >> Ethernut 5 board support (2011-11-21 17:51:06 +0100)
> > >>
> > >> are available in the git repository at:
> > >> git://git.denx.de/u-boot-pxa.git master
> > >>
> > >> Marek Vasut (4):
> > >> PXA: Drop CERF250 board
> > >> PXA: Drop CRADLE board
> > >> PXA: Drop PLEB2 board
> > >> PXA: Drop XM250 board
> > >
> > > Applied to u-boot-arm/master, thanks!
> >
> > Wait... Anatolij submitted patches to add machine ID back to these
> > boards.
> >
> > Anatolij, do you intend to take maintainership of these boards ?
>
> I do not have any of these boards, so I can't really maintain
> the code for them. Also I'm not sure whether the current U-Boot
> runs on these boards (I've seen patches to fix PXA relocation [1]).
>
> Does it make sense to keep them?
Not even the original maintainer responds by now. So I think they are dead now.
M
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PULL] u-boot-pxa / master
2011-11-25 21:13 ` Marek Vasut
@ 2011-11-25 21:29 ` Albert ARIBAUD
2011-11-25 22:04 ` Anatolij Gustschin
2011-12-02 10:11 ` Marek Vasut
1 sibling, 1 reply; 12+ messages in thread
From: Albert ARIBAUD @ 2011-11-25 21:29 UTC (permalink / raw)
To: u-boot
Le 25/11/2011 22:13, Marek Vasut a ?crit :
>> Hi Albert,
>>
>> On Fri, 25 Nov 2011 20:50:55 +0100
>>
>> Albert ARIBAUD<albert.u.boot@aribaud.net> wrote:
>>> Hi Marek, Anatolij,
>>>
>>> Le 25/11/2011 20:46, Albert ARIBAUD a ?crit :
>>>> Hi Marek,
>>>>
>>>> Le 25/11/2011 19:56, Marek Vasut a ?crit :
>>>>> The following changes since commit
>>>>> 19cdfd3e84bff108febb127b598ac3f1634c768c:
>>>>>
>>>>> Ethernut 5 board support (2011-11-21 17:51:06 +0100)
>>>>>
>>>>> are available in the git repository at:
>>>>> git://git.denx.de/u-boot-pxa.git master
>>>>>
>>>>> Marek Vasut (4):
>>>>> PXA: Drop CERF250 board
>>>>> PXA: Drop CRADLE board
>>>>> PXA: Drop PLEB2 board
>>>>> PXA: Drop XM250 board
>>>>
>>>> Applied to u-boot-arm/master, thanks!
>>>
>>> Wait... Anatolij submitted patches to add machine ID back to these
>>> boards.
>>>
>>> Anatolij, do you intend to take maintainership of these boards ?
>>
>> I do not have any of these boards, so I can't really maintain
>> the code for them. Also I'm not sure whether the current U-Boot
>> runs on these boards (I've seen patches to fix PXA relocation [1]).
>>
>> Does it make sense to keep them?
>
> Not even the original maintainer responds by now. So I think they are dead now.
>
> M
Ok, so I consider those four as dead, I confirm your pull request as
accepted and I mark Anatolij's patches as rejected.
Anatolij, what about your other machine ID addition patches?
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PULL] u-boot-pxa / master
2011-11-25 21:13 ` Marek Vasut
2011-11-25 21:29 ` Albert ARIBAUD
@ 2011-12-02 10:11 ` Marek Vasut
2011-12-05 17:00 ` Albert ARIBAUD
1 sibling, 1 reply; 12+ messages in thread
From: Marek Vasut @ 2011-12-02 10:11 UTC (permalink / raw)
To: u-boot
I see no comments on my patchset for a while, so:
The following changes since commit f2695a272849764cda09bcce6f86d03105e9e46d:
PXA: Drop XM250 board (2011-11-25 20:44:24 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git master
Marek Vasut (19):
PXA: Rework start.S to be closer to other ARMs
PXA: Re-add the Dcache locking as RAM for pxa250
PXA: Fixup PXA25x boards after start.S update
PXA: Drop Voipac PXA270 OneNAND IPL
PXA: Adapt Voipac PXA270 to OneNAND SPL
PXA: Enable command line editing for vpac270
PXA: Unify vpac270 environment size
PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
PXA: Separate PXA2xx CPU init
PXA: Add cpuinfo display for PXA2xx
PXA: Replace timer driver
PXA: Cleanup Colibri PXA270
PXA: Export cpu_is_ and pxa_dram_init functions
PXA: Squash extern pxa_dram_init()
PXA: Rename pxa_dram_init to pxa2xx_dram_init
PXA: Introduce common configuration header for PXA
PXA: Flip colibri_pxa27x to pxa-common.h
PXA: Move colibri_pxa270 to board/toradex/
GCC4.6: PXA: Squash warning in xaeniax
arch/arm/cpu/pxa/Makefile | 7 +-
arch/arm/cpu/pxa/cpuinfo.c | 132 ++++++
arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} | 119 ++----
arch/arm/cpu/pxa/start.S | 456 ++++++++++----------
arch/arm/cpu/pxa/timer.c | 91 ++---
arch/arm/cpu/pxa/u-boot.lds | 6 +
arch/arm/cpu/pxa/usb.c | 12 +-
arch/arm/include/asm/arch-pxa/pxa-regs.h | 48 +-
.../arm/include/asm/arch-pxa/pxa.h | 31 +-
board/balloon3/balloon3.c | 4 +-
board/lubbock/lubbock.c | 4 +-
board/palmld/palmld.c | 4 +-
board/palmtc/palmtc.c | 4 +-
board/pxa255_idp/pxa_idp.c | 4 +-
board/{ => toradex}/colibri_pxa270/Makefile | 0
.../{ => toradex}/colibri_pxa270/colibri_pxa270.c | 36 +-
board/trizepsiv/conxs.c | 4 +-
board/vpac270/Makefile | 4 +
board/vpac270/onenand.c | 65 +++
board/vpac270/u-boot-spl.lds | 92 ++++
board/vpac270/vpac270.c | 6 +-
board/xaeniax/flash.c | 7 +-
board/xaeniax/xaeniax.c | 4 +-
board/zipitz2/zipitz2.c | 4 +-
boards.cfg | 2 +-
common/lcd.c | 14 +-
drivers/mmc/pxa_mmc.c | 7 +-
drivers/mmc/pxa_mmc_gen.c | 4 +-
drivers/net/lan91c96.h | 4 +-
drivers/net/smc91111.h | 6 +-
drivers/serial/serial_pxa.c | 4 +-
drivers/serial/usbtty.h | 2 +-
drivers/usb/gadget/Makefile | 2 +-
include/configs/balloon3.h | 2 +-
include/configs/colibri_pxa270.h | 103 ++---
include/configs/lubbock.h | 4 +-
include/configs/palmld.h | 2 +-
include/configs/palmtc.h | 4 +-
include/configs/pxa-common.h | 60 +++
include/configs/pxa255_idp.h | 4 +-
include/configs/trizepsiv.h | 2 +-
include/configs/vpac270.h | 43 ++-
include/configs/xaeniax.h | 4 +-
include/configs/zipitz2.h | 2 +-
include/lcd.h | 5 +-
onenand_ipl/board/vpac270/Makefile | 79 ----
onenand_ipl/board/vpac270/config.mk | 1 -
onenand_ipl/board/vpac270/u-boot.onenand.lds | 51 ---
48 files changed, 851 insertions(+), 704 deletions(-)
create mode 100644 arch/arm/cpu/pxa/cpuinfo.c
rename arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} (76%)
rename onenand_ipl/board/vpac270/vpac270.c => arch/arm/include/asm/arch-
pxa/pxa.h (54%)
rename board/{ => toradex}/colibri_pxa270/Makefile (100%)
rename board/{ => toradex}/colibri_pxa270/colibri_pxa270.c (81%)
create mode 100644 board/vpac270/onenand.c
create mode 100644 board/vpac270/u-boot-spl.lds
create mode 100644 include/configs/pxa-common.h
delete mode 100644 onenand_ipl/board/vpac270/Makefile
delete mode 100644 onenand_ipl/board/vpac270/config.mk
delete mode 100644 onenand_ipl/board/vpac270/u-boot.onenand.lds
^ permalink raw reply [flat|nested] 12+ messages in thread* [U-Boot] [PULL] u-boot-pxa / master
2011-12-02 10:11 ` Marek Vasut
@ 2011-12-05 17:00 ` Albert ARIBAUD
0 siblings, 0 replies; 12+ messages in thread
From: Albert ARIBAUD @ 2011-12-05 17:00 UTC (permalink / raw)
To: u-boot
Hi Marek,
Le 02/12/2011 11:11, Marek Vasut a ?crit :
> I see no comments on my patchset for a while, so:
>
> The following changes since commit f2695a272849764cda09bcce6f86d03105e9e46d:
>
> PXA: Drop XM250 board (2011-11-25 20:44:24 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-pxa.git master
>
> Marek Vasut (19):
> PXA: Rework start.S to be closer to other ARMs
> PXA: Re-add the Dcache locking as RAM for pxa250
> PXA: Fixup PXA25x boards after start.S update
> PXA: Drop Voipac PXA270 OneNAND IPL
> PXA: Adapt Voipac PXA270 to OneNAND SPL
> PXA: Enable command line editing for vpac270
> PXA: Unify vpac270 environment size
> PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
> PXA: Separate PXA2xx CPU init
> PXA: Add cpuinfo display for PXA2xx
> PXA: Replace timer driver
> PXA: Cleanup Colibri PXA270
> PXA: Export cpu_is_ and pxa_dram_init functions
> PXA: Squash extern pxa_dram_init()
> PXA: Rename pxa_dram_init to pxa2xx_dram_init
> PXA: Introduce common configuration header for PXA
> PXA: Flip colibri_pxa27x to pxa-common.h
> PXA: Move colibri_pxa270 to board/toradex/
> GCC4.6: PXA: Squash warning in xaeniax
>
> arch/arm/cpu/pxa/Makefile | 7 +-
> arch/arm/cpu/pxa/cpuinfo.c | 132 ++++++
> arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} | 119 ++----
> arch/arm/cpu/pxa/start.S | 456 ++++++++++----------
> arch/arm/cpu/pxa/timer.c | 91 ++---
> arch/arm/cpu/pxa/u-boot.lds | 6 +
> arch/arm/cpu/pxa/usb.c | 12 +-
> arch/arm/include/asm/arch-pxa/pxa-regs.h | 48 +-
> .../arm/include/asm/arch-pxa/pxa.h | 31 +-
> board/balloon3/balloon3.c | 4 +-
> board/lubbock/lubbock.c | 4 +-
> board/palmld/palmld.c | 4 +-
> board/palmtc/palmtc.c | 4 +-
> board/pxa255_idp/pxa_idp.c | 4 +-
> board/{ => toradex}/colibri_pxa270/Makefile | 0
> .../{ => toradex}/colibri_pxa270/colibri_pxa270.c | 36 +-
> board/trizepsiv/conxs.c | 4 +-
> board/vpac270/Makefile | 4 +
> board/vpac270/onenand.c | 65 +++
> board/vpac270/u-boot-spl.lds | 92 ++++
> board/vpac270/vpac270.c | 6 +-
> board/xaeniax/flash.c | 7 +-
> board/xaeniax/xaeniax.c | 4 +-
> board/zipitz2/zipitz2.c | 4 +-
> boards.cfg | 2 +-
> common/lcd.c | 14 +-
> drivers/mmc/pxa_mmc.c | 7 +-
> drivers/mmc/pxa_mmc_gen.c | 4 +-
> drivers/net/lan91c96.h | 4 +-
> drivers/net/smc91111.h | 6 +-
> drivers/serial/serial_pxa.c | 4 +-
> drivers/serial/usbtty.h | 2 +-
> drivers/usb/gadget/Makefile | 2 +-
> include/configs/balloon3.h | 2 +-
> include/configs/colibri_pxa270.h | 103 ++---
> include/configs/lubbock.h | 4 +-
> include/configs/palmld.h | 2 +-
> include/configs/palmtc.h | 4 +-
> include/configs/pxa-common.h | 60 +++
> include/configs/pxa255_idp.h | 4 +-
> include/configs/trizepsiv.h | 2 +-
> include/configs/vpac270.h | 43 ++-
> include/configs/xaeniax.h | 4 +-
> include/configs/zipitz2.h | 2 +-
> include/lcd.h | 5 +-
> onenand_ipl/board/vpac270/Makefile | 79 ----
> onenand_ipl/board/vpac270/config.mk | 1 -
> onenand_ipl/board/vpac270/u-boot.onenand.lds | 51 ---
> 48 files changed, 851 insertions(+), 704 deletions(-)
> create mode 100644 arch/arm/cpu/pxa/cpuinfo.c
> rename arch/arm/cpu/pxa/{cpu.c => pxa2xx.c} (76%)
> rename onenand_ipl/board/vpac270/vpac270.c => arch/arm/include/asm/arch-
> pxa/pxa.h (54%)
> rename board/{ => toradex}/colibri_pxa270/Makefile (100%)
> rename board/{ => toradex}/colibri_pxa270/colibri_pxa270.c (81%)
> create mode 100644 board/vpac270/onenand.c
> create mode 100644 board/vpac270/u-boot-spl.lds
> create mode 100644 include/configs/pxa-common.h
> delete mode 100644 onenand_ipl/board/vpac270/Makefile
> delete mode 100644 onenand_ipl/board/vpac270/config.mk
> delete mode 100644 onenand_ipl/board/vpac270/u-boot.onenand.lds
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2011-12-05 17:00 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-11-12 2:44 [U-Boot] [PULL] u-boot-pxa / master Marek Vasut
2011-11-15 21:25 ` Albert ARIBAUD
2011-11-25 18:56 Marek Vasut
2011-11-25 19:46 ` Albert ARIBAUD
2011-11-25 19:50 ` Albert ARIBAUD
2011-11-25 20:28 ` Marek Vasut
2011-11-25 20:42 ` Anatolij Gustschin
2011-11-25 21:13 ` Marek Vasut
2011-11-25 21:29 ` Albert ARIBAUD
2011-11-25 22:04 ` Anatolij Gustschin
2011-12-02 10:11 ` Marek Vasut
2011-12-05 17:00 ` Albert ARIBAUD
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.