* Re: [lm-sensors] 3 wire fan on 4 pin header
@ 2011-12-05 17:35 Charles
0 siblings, 0 replies; only message in thread
From: Charles @ 2011-12-05 17:35 UTC (permalink / raw)
To: lm-sensors
On 05/12/11 21:45, Jean Delvare wrote:
> I can imagine that Asus came up with a way to detect whether the fan
> connector has 3 or 4 wires, and to route the PWM signal appropriately.
> I see no mention of this in the manual though.
Perhaps the same was done by Gigabyte on the GA-MA770-DS3 Rev 1.0 where
the same 3-wire S-Flex SFF21E was connected to the 4-pin SYS_FAN1 and
was controlled by fancontrol.
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-12-05 17:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-12-05 17:35 [lm-sensors] 3 wire fan on 4 pin header Charles
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.