* BCM4313 keeps disconnecting with brcmsmac and multiple APs
@ 2012-01-24 10:31 Milan Bouchet-Valat
2012-01-27 8:46 ` Arend van Spriel
2012-01-27 10:08 ` Arend van Spriel
0 siblings, 2 replies; 11+ messages in thread
From: Milan Bouchet-Valat @ 2012-01-24 10:31 UTC (permalink / raw)
To: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 900 bytes --]
Hi!
My workplace's wireless network has (at least) 3 access points in my
reach. Every few minutes (ranging from 5 to 30), my WiFi connection goes
down; then, I can't reconnect until I reload the brcmsmac module. If I
do that, everything is OK until the next failure.
Every time this happens, I see this in dmesg:
[ 6618.899907] wlan0: direct probe to XXXX (try 1/3)
[ 6619.098812] wlan0: direct probe to XXXX (try 2/3)
[ 6619.298437] wlan0: direct probe to XXXX (try 3/3)
[ 6619.498095] wlan0: direct probe to XXXX timed out
(XXXX is always the same AP)
I tried using compat-wireless-next as of yesterday (3.1.9 on Fedora 16),
but it also happened with 3.2.1 and 3.1.6.
I found a previous thread that could be related[1], but if I understand
correctly the fix is already present in the kernel I'm using.
Please ask if you need testing or informations.
1: https://lkml.org/lkml/2011/10/18/145
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log; name=dmesg.log, Size: 116644 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.9-1.fc16.x86_64 (mockbuild@x86-15.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Fri Jan 13 16:37:42 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.9-1.fc16.x86_64 root=UUID=2949b379-bd76-4ed6-a2be-12a1bc4634c5 ro acpi_osi=Linux acpi_backlight=vendor rd.md=0 rd.lvm=0 rd.dm=0 quiet LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 KEYTABLE=fr
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009b63f000 (usable)
[ 0.000000] BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved)
[ 0.000000] BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable)
[ 0.000000] BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000158000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dm4 Notebook PC /146A, BIOS F.11 07/08/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x158000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 158000000 mask FF8000000 uncachable
[ 0.000000] 7 base 160000000 mask FE0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000009b800000
[ 0.000000] 0000000000 - 009b800000 page 2M
[ 0.000000] kernel direct mapping tables up to 9b800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000158000000
[ 0.000000] 0100000000 - 0158000000 page 2M
[ 0.000000] kernel direct mapping tables up to 158000000 @ 9b638000-9b63f000
[ 0.000000] RAMDISK: 35e40000 - 36f18000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000009b7fe120 0008C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000009b7e9000 0F812 (v02 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000009b75f000 00040
[ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e6000 01152 (v01 TrmRef PtidDevc 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000009b7e5000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117)
[ 0.000000] ACPI: BOOT 000000009b7e4000 00028 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e3000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000009b7e2000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117)
[ 0.000000] ACPI: ASPT 000000009b7e1000 00034 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000158000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000158000000
[ 0.000000] NODE_DATA [0000000157fec000 - 0000000157ffffff]
[ 0.000000] [ffffea0000000000-ffffea00055fffff] PMD -> [ffff880153800000-ffff8801575fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00158000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0009b63f
[ 0.000000] 0: 0x0009b7ff -> 0x0009b800
[ 0.000000] 0: 0x00100000 -> 0x00158000
[ 0.000000] On node 0 totalpages: 996813
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 616064 pages, LIFO batch:31
[ 0.000000] Normal zone: 5632 pages used for memmap
[ 0.000000] Normal zone: 354816 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009b63f000 - 000000009b6bf000
[ 0.000000] PM: Registered nosave memory: 000000009b6bf000 - 000000009b7bf000
[ 0.000000] PM: Registered nosave memory: 000000009b7bf000 - 000000009b7ff000
[ 0.000000] PM: Registered nosave memory: 000000009b800000 - 00000000a0000000
[ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880157c00000 s81536 r8192 d20864 u262144
[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 974792
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.9-1.fc16.x86_64 root=UUID=2949b379-bd76-4ed6-a2be-12a1bc4634c5 ro acpi_osi=Linux acpi_backlight=vendor rd.md=0 rd.lvm=0 rd.dm=0 quiet LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 KEYTABLE=fr
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3825132k/5636096k available (6024k kernel code, 1648844k absent, 162120k reserved, 5657k data, 964k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2394.032 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.06 BogoMIPS (lpj=2394032)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000038] SELinux: Initializing.
[ 0.000045] SELinux: Starting in permissive mode
[ 0.000422] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001504] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001976] Mount-cache hash table entries: 256
[ 0.002109] Initializing cgroup subsys cpuacct
[ 0.002114] Initializing cgroup subsys memory
[ 0.002124] Initializing cgroup subsys devices
[ 0.002126] Initializing cgroup subsys freezer
[ 0.002127] Initializing cgroup subsys net_cls
[ 0.002129] Initializing cgroup subsys blkio
[ 0.002135] Initializing cgroup subsys perf_event
[ 0.002160] CPU: Physical Processor ID: 0
[ 0.002161] CPU: Processor Core ID: 0
[ 0.002166] mce: CPU supports 9 MCE banks
[ 0.002175] CPU0: Thermal monitoring handled by SMI
[ 0.002183] using mwait in idle threads.
[ 0.003306] ACPI: Core revision 20110623
[ 0.029570] ftrace: allocating 22701 entries in 90 pages
[ 0.036372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046358] CPU0: Intel(R) Core(TM) i5 CPU M 450 @ 2.40GHz stepping 05
[ 0.147264] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.147270] ... version: 3
[ 0.147271] ... bit width: 48
[ 0.147272] ... generic registers: 4
[ 0.147273] ... value mask: 0000ffffffffffff
[ 0.147275] ... max period: 000000007fffffff
[ 0.147276] ... fixed-purpose events: 3
[ 0.147277] ... event mask: 000000070000000f
[ 0.147771] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.147853] Booting Node 0, Processors #1
[ 0.147855] smpboot cpu 1: start_ip = 98000
[ 0.218162] CPU1: Thermal monitoring handled by SMI
[ 0.238233] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.238348] #2
[ 0.238350] smpboot cpu 2: start_ip = 98000
[ 0.308997] CPU2: Thermal monitoring handled by SMI
[ 0.329063] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.329162] #3
[ 0.329163] smpboot cpu 3: start_ip = 98000
[ 0.398837] CPU3: Thermal monitoring handled by SMI
[ 0.418863] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.418906] Brought up 4 CPUs
[ 0.418908] Total of 4 processors activated (19151.29 BogoMIPS).
[ 0.421071] devtmpfs: initialized
[ 0.421899] PM: Registering ACPI NVS region at 9b6bf000 (1048576 bytes)
[ 0.422574] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.422605] RTC time: 10:34:19, date: 01/24/12
[ 0.422635] NET: Registered protocol family 16
[ 0.422777] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.422779] ACPI: bus type pci registered
[ 0.422851] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.422854] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.453938] PCI: Using configuration type 1 for base access
[ 0.454659] bio: create slab <bio-0> at 0
[ 0.454730] ACPI: Added _OSI(Module Device)
[ 0.454732] ACPI: Added _OSI(Processor Device)
[ 0.454733] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.454735] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.454736] ACPI: Added _OSI(Linux)
[ 0.456461] ACPI: EC: Look up EC in DSDT
[ 0.458142] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.466753] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.471954] ACPI: SSDT 000000009b691a18 00484 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.472368] ACPI: Dynamic OEM Table Load:
[ 0.472370] ACPI: SSDT (null) 00484 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.472531] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.472934] ACPI: Dynamic OEM Table Load:
[ 0.472936] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.478987] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.479441] ACPI: Dynamic OEM Table Load:
[ 0.479443] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.481858] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.482279] ACPI: Dynamic OEM Table Load:
[ 0.482281] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.487932] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.945058] ACPI: Interpreter enabled
[ 0.945062] ACPI: (supports S0 S3 S4 S5)
[ 0.945097] ACPI: Using IOAPIC for interrupt routing
[ 0.945752] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.961535] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.962958] ACPI: Power Resource [FN00] (on)
[ 0.963339] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.963532] ACPI: No dock devices found.
[ 0.963533] HEST: Table not found.
[ 0.963536] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.963840] \_SB_.PCI0:_OSC invalid UUID
[ 0.963841] _OSC request data:1 8 1f
[ 0.963845] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.964353] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.964355] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.964357] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.964360] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff]
[ 0.964371] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.964388] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.964403] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.964413] pci 0000:00:02.0: reg 10: [mem 0xb0000000-0xb03fffff 64bit]
[ 0.964419] pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.964423] pci 0000:00:02.0: reg 20: [io 0x3050-0x3057]
[ 0.964476] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.964502] pci 0000:00:16.0: reg 10: [mem 0xb4406100-0xb440610f 64bit]
[ 0.964574] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.964579] pci 0000:00:16.0: PME# disabled
[ 0.964611] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.964890] pci 0000:00:1a.0: reg 10: [mem 0xb4405c00-0xb4405fff]
[ 0.966433] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.966437] pci 0000:00:1a.0: PME# disabled
[ 0.966460] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.966473] pci 0000:00:1b.0: reg 10: [mem 0xb4400000-0xb4403fff 64bit]
[ 0.966522] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.966525] pci 0000:00:1b.0: PME# disabled
[ 0.966544] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.966593] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.966596] pci 0000:00:1c.0: PME# disabled
[ 0.966616] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.966666] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.966669] pci 0000:00:1c.1: PME# disabled
[ 0.966700] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.966968] pci 0000:00:1d.0: reg 10: [mem 0xb4405800-0xb4405bff]
[ 0.968504] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.968508] pci 0000:00:1d.0: PME# disabled
[ 0.968528] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.968579] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 0.968685] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 0.968707] pci 0000:00:1f.2: reg 10: [io 0x3048-0x304f]
[ 0.968716] pci 0000:00:1f.2: reg 14: [io 0x305c-0x305f]
[ 0.968726] pci 0000:00:1f.2: reg 18: [io 0x3040-0x3047]
[ 0.968735] pci 0000:00:1f.2: reg 1c: [io 0x3058-0x305b]
[ 0.968744] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
[ 0.968754] pci 0000:00:1f.2: reg 24: [mem 0xb4405000-0xb44057ff]
[ 0.968794] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.968798] pci 0000:00:1f.2: PME# disabled
[ 0.968816] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.968829] pci 0000:00:1f.3: reg 10: [mem 0xb4406000-0xb44060ff 64bit]
[ 0.968849] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.968884] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.968904] pci 0000:00:1f.6: reg 10: [mem 0xb4404000-0xb4404fff 64bit]
[ 0.969018] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.969034] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.969060] pci 0000:01:00.0: reg 18: [mem 0xb0404000-0xb0404fff 64bit pref]
[ 0.969077] pci 0000:01:00.0: reg 20: [mem 0xb0400000-0xb0403fff 64bit pref]
[ 0.969122] pci 0000:01:00.0: supports D1 D2
[ 0.969124] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.969128] pci 0000:01:00.0: PME# disabled
[ 0.970894] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.970900] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.970906] pci 0000:00:1c.0: bridge window [mem 0xb3400000-0xb43fffff]
[ 0.970918] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
[ 0.971007] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280
[ 0.971029] pci 0000:02:00.0: reg 10: [mem 0xb2400000-0xb2403fff 64bit]
[ 0.971118] pci 0000:02:00.0: supports D1 D2
[ 0.972919] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.972922] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.972926] pci 0000:00:1c.1: bridge window [mem 0xb2400000-0xb33fffff]
[ 0.972931] pci 0000:00:1c.1: bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
[ 0.972986] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.972995] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.972997] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.972999] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.973001] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[ 0.973015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.973139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.973200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.973233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.973315] \_SB_.PCI0:_OSC invalid UUID
[ 0.973316] _OSC request data:1 1f 1f
[ 0.973319] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.973346] \_SB_.PCI0:_OSC invalid UUID
[ 0.973347] _OSC request data:1 0 1d
[ 0.973350] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.973352] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.977457] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.977514] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.977532] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.977549] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.977563] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.977578] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.977592] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.977619] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.977621] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.977622] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.977788] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.977828] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.977868] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.977907] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.977943] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.977980] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.978018] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.978054] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.978152] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.978159] vgaarb: loaded
[ 0.978160] vgaarb: bridge control possible 0000:00:02.0
[ 0.978226] SCSI subsystem initialized
[ 0.978289] libata version 3.00 loaded.
[ 0.978335] usbcore: registered new interface driver usbfs
[ 0.978346] usbcore: registered new interface driver hub
[ 0.978367] usbcore: registered new device driver usb
[ 0.978416] PCI: Using ACPI for IRQ routing
[ 0.986525] PCI: pci_cache_line_size set to 64 bytes
[ 0.986610] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 0.986612] reserve RAM buffer: 000000009b63f000 - 000000009bffffff
[ 0.986614] reserve RAM buffer: 000000009b800000 - 000000009bffffff
[ 0.986696] NetLabel: Initializing
[ 0.986698] NetLabel: domain hash size = 128
[ 0.986699] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.986708] NetLabel: unlabeled traffic allowed by default
[ 0.986717] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.986721] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.988735] Switching to clocksource hpet
[ 0.988772] Switched to NOHz mode on CPU #0
[ 0.988846] Switched to NOHz mode on CPU #3
[ 0.988880] Switched to NOHz mode on CPU #2
[ 0.988889] Switched to NOHz mode on CPU #1
[ 0.994284] pnp: PnP ACPI init
[ 0.994300] ACPI: bus type pnp registered
[ 0.994610] pnp 00:00: [bus 00-fe]
[ 0.994613] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.994615] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.994616] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.994618] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.994619] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.994621] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.994623] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.994624] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.994626] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.994627] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.994629] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.994630] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.994632] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.994633] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.994635] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.994636] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.994638] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.994639] pnp 00:00: [mem 0xa0000000-0xfeafffff window]
[ 0.994641] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.994735] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.994776] pnp 00:01: [io 0x0000-0x001f]
[ 0.994777] pnp 00:01: [io 0x0081-0x0091]
[ 0.994779] pnp 00:01: [io 0x0093-0x009f]
[ 0.994780] pnp 00:01: [io 0x00c0-0x00df]
[ 0.994782] pnp 00:01: [dma 4]
[ 0.994800] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.994807] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.994823] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.994929] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.994951] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.994959] pnp 00:04: [io 0x00f0]
[ 0.994971] pnp 00:04: [irq 13]
[ 0.994988] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.994996] pnp 00:05: [io 0x002e-0x002f]
[ 0.994998] pnp 00:05: [io 0x004e-0x004f]
[ 0.994999] pnp 00:05: [io 0x0061]
[ 0.995000] pnp 00:05: [io 0x0063]
[ 0.995001] pnp 00:05: [io 0x0065]
[ 0.995003] pnp 00:05: [io 0x0067]
[ 0.995004] pnp 00:05: [io 0x0070]
[ 0.995005] pnp 00:05: [io 0x0080]
[ 0.995006] pnp 00:05: [io 0x0092]
[ 0.995007] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.995009] pnp 00:05: [io 0x0680-0x069f]
[ 0.995010] pnp 00:05: [io 0x0800-0x080f]
[ 0.995011] pnp 00:05: [io 0x0810-0x0813]
[ 0.995012] pnp 00:05: [io 0xffff]
[ 0.995014] pnp 00:05: [io 0x0400-0x047f]
[ 0.995015] pnp 00:05: [io 0x0500-0x0501]
[ 0.995016] pnp 00:05: [io 0x0700-0x077f]
[ 0.995017] pnp 00:05: [io 0x164e-0x164f]
[ 0.995030] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff]
[ 0.995068] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.995070] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.995072] system 00:05: [io 0x0810-0x0813] has been reserved
[ 0.995074] system 00:05: [io 0xffff] has been reserved
[ 0.995076] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.995078] system 00:05: [io 0x0500-0x0501] has been reserved
[ 0.995079] system 00:05: [io 0x0700-0x077f] has been reserved
[ 0.995082] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.995088] pnp 00:06: [io 0x0070-0x0077]
[ 0.995094] pnp 00:06: [irq 8]
[ 0.995113] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.995121] pnp 00:07: [io 0x0060]
[ 0.995122] pnp 00:07: [io 0x0064]
[ 0.995127] pnp 00:07: [irq 1]
[ 0.995145] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.995154] pnp 00:08: [irq 12]
[ 0.995173] pnp 00:08: Plug and Play ACPI device, IDs SYN1e21 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.995270] pnp 00:09: [irq 23]
[ 0.995302] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.995456] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.995458] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 0.995460] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.995461] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.995462] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.995464] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.995465] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.995469] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.995470] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.995472] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.995473] pnp 00:0a: [mem 0xb4500000-0xb4500fff]
[ 0.995521] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.995523] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.995525] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.995527] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.995529] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.995531] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.995532] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.995534] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.995537] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.995538] system 00:0a: [mem 0xb4500000-0xb4500fff] has been reserved
[ 0.995541] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.995725] pnp 00:0b: [bus ff]
[ 0.995763] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.995785] pnp: PnP ACPI: found 12 devices
[ 0.995787] ACPI: ACPI bus type pnp unregistered
[ 1.002683] PCI: max bus depth: 1 pci_try_num: 2
[ 1.002707] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.002711] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.002715] pci 0000:00:1c.0: bridge window [mem 0xb3400000-0xb43fffff]
[ 1.002719] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
[ 1.002725] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 1.002727] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 1.002731] pci 0000:00:1c.1: bridge window [mem 0xb2400000-0xb33fffff]
[ 1.002735] pci 0000:00:1c.1: bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
[ 1.002741] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 1.002763] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.002767] pci 0000:00:1c.0: setting latency timer to 64
[ 1.002776] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.002780] pci 0000:00:1c.1: setting latency timer to 64
[ 1.002785] pci 0000:00:1e.0: setting latency timer to 64
[ 1.002789] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.002790] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.002792] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.002794] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.002796] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.002797] pci_bus 0000:01: resource 1 [mem 0xb3400000-0xb43fffff]
[ 1.002799] pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb13fffff 64bit pref]
[ 1.002801] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.002802] pci_bus 0000:02: resource 1 [mem 0xb2400000-0xb33fffff]
[ 1.002804] pci_bus 0000:02: resource 2 [mem 0xb1400000-0xb23fffff 64bit pref]
[ 1.002806] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 1.002808] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 1.002809] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.002811] pci_bus 0000:03: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.002845] NET: Registered protocol family 2
[ 1.002961] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.003787] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.005648] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.005889] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.005891] TCP reno registered
[ 1.005902] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.005922] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.006018] NET: Registered protocol family 1
[ 1.006033] pci 0000:00:02.0: Boot video device
[ 1.027891] PCI: CLS 64 bytes, default 64
[ 1.027950] Unpacking initramfs...
[ 1.321976] Freeing initrd memory: 17248k freed
[ 1.325832] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.325837] Placing 64MB software IO TLB between ffff880097638000 - ffff88009b638000
[ 1.325839] software IO TLB at phys 0x97638000 - 0x9b638000
[ 1.325858] Simple Boot Flag at 0x44 set to 0x1
[ 1.326459] Intel AES-NI instructions are not detected.
[ 1.326575] audit: initializing netlink socket (disabled)
[ 1.326588] type=2000 audit(1327401260.150:1): initialized
[ 1.351879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.369891] VFS: Disk quotas dquot_6.5.2
[ 1.369944] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.370384] msgmni has been set to 7504
[ 1.370431] SELinux: Registering netfilter hooks
[ 1.370759] alg: No test for stdrng (krng)
[ 1.370771] NET: Registered protocol family 38
[ 1.370816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.370844] io scheduler noop registered
[ 1.370846] io scheduler deadline registered
[ 1.370882] io scheduler cfq registered (default)
[ 1.371060] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.371076] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.371078] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.371432] intel_idle: MWAIT substates: 0x1120
[ 1.371434] intel_idle: v0.4 model 0x25
[ 1.371435] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.379321] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.379403] ACPI: AC Adapter [AC] (on-line)
[ 1.379573] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.379592] ACPI: Lid Switch [LID0]
[ 1.379621] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.379625] ACPI: Power Button [PWRB]
[ 1.379653] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.379655] ACPI: Power Button [PWRF]
[ 1.379698] ACPI: Fan [FAN0] (on)
[ 1.379818] ACPI: acpi_idle yielding to intel_idle
[ 1.414192] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.414197] ACPI: Thermal Zone [TZ00] (49 C)
[ 1.422169] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.422173] ACPI: Thermal Zone [TZ01] (32 C)
[ 1.430155] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.430159] ACPI: Thermal Zone [TZ02] (0 C)
[ 1.430207] ERST: Table is not found!
[ 1.430210] GHES: HEST is not enabled!
[ 1.430297] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.472348] Non-volatile memory driver v1.3
[ 1.472350] Linux agpgart interface v0.103
[ 1.472407] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.472497] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.473262] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.473426] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
[ 1.474144] loop: module loaded
[ 1.474234] ahci 0000:00:1f.2: version 3.0
[ 1.474256] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.474301] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.474361] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[ 1.474364] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 1.474369] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.478374] scsi0 : ahci
[ 1.478453] scsi1 : ahci
[ 1.478507] scsi2 : ahci
[ 1.478561] scsi3 : ahci
[ 1.478616] scsi4 : ahci
[ 1.478715] ata1: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405100 irq 40
[ 1.478718] ata2: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405180 irq 40
[ 1.478719] ata3: DUMMY
[ 1.478720] ata4: DUMMY
[ 1.478722] ata5: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405300 irq 40
[ 1.478783] Fixed MDIO Bus: probed
[ 1.478851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.478866] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.478881] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.478885] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.478963] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.478990] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.482920] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.482936] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb4405c00
[ 1.492019] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.492054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.492058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.492062] usb usb1: Product: EHCI Host Controller
[ 1.492065] usb usb1: Manufacturer: Linux 3.1.9-1.fc16.x86_64 ehci_hcd
[ 1.492068] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.492188] hub 1-0:1.0: USB hub found
[ 1.492192] hub 1-0:1.0: 3 ports detected
[ 1.492258] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.492270] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.492273] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.492322] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.492346] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.496263] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.496274] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xb4405800
[ 1.505994] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.506021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.506025] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.506029] usb usb2: Product: EHCI Host Controller
[ 1.506032] usb usb2: Manufacturer: Linux 3.1.9-1.fc16.x86_64 ehci_hcd
[ 1.506035] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.506145] hub 2-0:1.0: USB hub found
[ 1.506147] hub 2-0:1.0: 3 ports detected
[ 1.506195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.506203] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.506247] usbcore: registered new interface driver usbserial
[ 1.506253] USB Serial support registered for generic
[ 1.506260] usbcore: registered new interface driver usbserial_generic
[ 1.506262] usbserial: USB Serial Driver core
[ 1.506290] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.510788] i8042: Detected active multiplexing controller, rev 1.1
[ 1.514335] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.514341] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.514362] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.514377] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.514393] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.514477] mousedev: PS/2 mouse device common for all mice
[ 1.514675] rtc_cmos 00:06: RTC can wake from S4
[ 1.514795] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.514823] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.514904] device-mapper: uevent: version 1.0.3
[ 1.514992] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 1.515135] cpuidle: using governor ladder
[ 1.515238] cpuidle: using governor menu
[ 1.515322] EFI Variables Facility v0.08 2004-May-17
[ 1.515409] usbcore: registered new interface driver usbhid
[ 1.515410] usbhid: USB HID core driver
[ 1.515464] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.515478] TCP cubic registered
[ 1.515479] Initializing XFRM netlink socket
[ 1.515581] NET: Registered protocol family 10
[ 1.515745] Mobile IPv6
[ 1.515748] NET: Registered protocol family 17
[ 1.515759] Registering the dns_resolver key type
[ 1.515892] PM: Hibernation image not present or could not be loaded.
[ 1.515903] registered taskstats version 1
[ 1.524953] IMA: No TPM chip found, activating TPM-bypass!
[ 1.525469] Magic number: 12:859:578
[ 1.525508] platform pcspkr: hash matches
[ 1.525676] rtc_cmos 00:06: setting system clock to 2012-01-24 10:34:21 UTC (1327401261)
[ 1.531103] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 1.531116] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
[ 1.531129] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
[ 1.544191] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 1.544203] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
[ 1.544214] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
[ 1.544222] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880150d998c0), AE_NOT_FOUND (20110623/psparse-536)
[ 1.551872] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.577084] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 1.577098] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
[ 1.577111] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
[ 1.577121] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880150d99b18), AE_NOT_FOUND (20110623/psparse-536)
[ 1.644129] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 1.644140] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
[ 1.644153] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
[ 1.644163] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880150d99a78), AE_NOT_FOUND (20110623/psparse-536)
[ 1.644286] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.644296] ACPI: Battery Slot [BAT0] (battery present)
[ 1.644366] Initializing network drop monitor service
[ 1.784587] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.784624] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.784650] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.785633] ata1.00: ATA-8: TOSHIBA MK5056GSY, LH003C, max UDMA/100
[ 1.785638] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.786766] ata1.00: configured for UDMA/100
[ 1.786954] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5056GS LH00 PQ: 0 ANSI: 5
[ 1.787176] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.787232] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.787280] sd 0:0:0:0: [sda] Write Protect is off
[ 1.787282] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.787328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.793541] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.798762] ata2.00: ATAPI: hp CDDVDW TS-U633F, HH05, max UDMA/100
[ 1.814413] ata2.00: configured for UDMA/100
[ 1.818557] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-U633F HH05 PQ: 0 ANSI: 5
[ 1.825473] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.825480] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.825689] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.825804] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.901920] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.903036] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.906130] Freeing unused kernel memory: 964k freed
[ 1.906343] Write protecting the kernel read-only data: 10240k
[ 1.907407] Freeing unused kernel memory: 100k freed
[ 1.907716] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.907723] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.908155] hub 1-1:1.0: USB hub found
[ 1.908343] hub 1-1:1.0: 6 ports detected
[ 1.917350] Freeing unused kernel memory: 1552k freed
[ 2.011152] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.038457] dracut: dracut-013-20.fc16
[ 2.050156] dracut: rd.luks=0: removing cryptoluks activation
[ 2.053777] dracut: rd.lvm=0: removing LVM activation
[ 2.059676] udevd[113]: starting version 173
[ 2.085223] [drm] Initialized drm 1.1.0 20060810
[ 2.090150] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.090154] i915 0000:00:02.0: setting latency timer to 64
[ 2.125325] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.125328] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.125590] hub 2-1:1.0: USB hub found
[ 2.125674] hub 2-1:1.0: 8 ports detected
[ 2.131459] mtrr: no more MTRRs available
[ 2.131461] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.131682] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[ 2.131689] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.131690] [drm] Driver supports precise vblank timestamp query.
[ 2.131721] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.200976] usb 1-1.4: new full speed USB device number 3 using ehci_hcd
[ 2.287463] usb 1-1.4: New USB device found, idVendor=138a, idProduct=0005
[ 2.287469] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.287474] usb 1-1.4: SerialNumber: 00b08095ca85
[ 2.325602] Refined TSC clocksource calibration: 2394.000 MHz.
[ 2.325610] Switching to clocksource tsc
[ 2.400764] usb 2-1.3: new full speed USB device number 3 using ehci_hcd
[ 2.453491] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
[ 2.489316] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
[ 2.489970] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=21b4
[ 2.489978] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.489984] usb 2-1.3: Product: Broadcom 2070 Bluetooth
[ 2.489988] usb 2-1.3: Manufacturer: Broadcom Corp
[ 2.489992] usb 2-1.3: SerialNumber: 002713DDD4FC
[ 2.563345] usb 2-1.6: new full speed USB device number 4 using ehci_hcd
[ 2.683206] fbcon: inteldrmfb (fb0) is primary device
[ 2.684239] [drm:ironlake_update_pch_refclk] *ERROR* enabling SSC on PCH
[ 2.710134] usb 2-1.6: new high speed USB device number 5 using ehci_hcd
[ 2.817452] usb 2-1.6: New USB device found, idVendor=10f1, idProduct=1a28
[ 2.817458] usb 2-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.817462] usb 2-1.6: Product: HP Webcam
[ 2.817464] usb 2-1.6: Manufacturer: Importek
[ 3.007752] Console: switching to colour frame buffer device 170x48
[ 3.013008] fb0: inteldrmfb frame buffer device
[ 3.013010] drm: registered panic notifier
[ 3.015131] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.015293] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.015818] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.067651] dracut: Starting plymouth daemon
[ 3.267369] dracut: rd.dm=0: removing DM RAID activation
[ 3.273440] dracut: rd.md=0: removing MD RAID activation
[ 3.314524] wmi: Mapper loaded
[ 3.771381] Btrfs loaded
[ 3.993194] device label home devid 1 transid 16129 /dev/sda6
[ 3.993605] device fsid be8d8291-3821-4584-a9a7-776b91d4d5a5 devid 1 transid 59746 /dev/sda5
[ 4.082184] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 4.167656] dracut: Checking ext4: /dev/disk/by-uuid/2949b379-bd76-4ed6-a2be-12a1bc4634c5
[ 4.167729] dracut: issuing e2fsck -a /dev/disk/by-uuid/2949b379-bd76-4ed6-a2be-12a1bc4634c5
[ 4.204963] dracut: Fedora: clean, 271064/2506752 files, 3239896/10010624 blocks
[ 4.205226] dracut: Remounting /dev/disk/by-uuid/2949b379-bd76-4ed6-a2be-12a1bc4634c5 with -o ro
[ 4.256920] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 4.268678] dracut: Mounted root filesystem /dev/sda7
[ 4.509351] dracut: Switching root
[ 4.961288] type=1404 audit(1327401264.940:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 5.058735] SELinux: 2048 avtab hash slots, 98655 rules.
[ 5.077820] SELinux: 2048 avtab hash slots, 98655 rules.
[ 5.177878] SELinux: 9 users, 13 roles, 3923 types, 209 bools, 1 sens, 1024 cats
[ 5.177883] SELinux: 82 classes, 98655 rules
[ 5.181389] SELinux: Completing initialization.
[ 5.181392] SELinux: Setting up existing superblocks.
[ 5.181399] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 5.181404] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 5.181632] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 5.181650] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 5.181658] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.181683] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 5.182172] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 5.182176] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 5.182862] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 5.182871] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 5.182874] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 5.182895] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 5.182902] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 5.182912] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 5.182923] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 5.182928] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 5.182933] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 5.183353] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.183360] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.185135] SELinux: initialized (dev sda7, type ext4), uses xattr
[ 5.189408] type=1403 audit(1327401265.168:3): policy loaded auid=4294967295 ses=4294967295
[ 5.196159] systemd[1]: Successfully loaded SELinux policy in 268ms 55us.
[ 5.255881] systemd[1]: Successfully loaded SELinux database in 59ms 461us, size on heap is 479K.
[ 5.306020] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 5.315740] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.316229] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.361323] systemd[1]: Relabelled /dev and /run in 45ms 21us.
[ 5.442344] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.458245] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.474221] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.475316] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.491199] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.500241] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.516162] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.526203] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 5.526308] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 5.550941] systemd[1]: Set hostname to <milan>.
[ 7.079595] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 9.288820] udevd[479]: starting version 173
[ 11.004315] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 11.004865] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 11.007479] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 11.829639] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 13.578247] mtp-probe[601]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4"
[ 13.578287] mtp-probe[603]: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6"
[ 13.579669] mtp-probe[603]: bus: 2, device: 5 was not an MTP device
[ 13.579924] mtp-probe[601]: bus: 1, device: 3 was not an MTP device
[ 19.181596] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 20.687653] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 20.689460] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
[ 20.689473] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x3
[ 20.690657] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 20.692141] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
[ 20.692151] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x3
[ 20.693694] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 21.673125] bcma-pci-bridge 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 21.673137] bcma-pci-bridge 0000:02:00.0: setting latency timer to 64
[ 21.673229] Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 21.673253] Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 21.673304] Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 21.683297] Bus registered
[ 21.859329] Bluetooth: Core ver 2.16
[ 21.859549] NET: Registered protocol family 31
[ 21.859552] Bluetooth: HCI device and connection manager initialized
[ 21.859556] Bluetooth: HCI socket layer initialized
[ 21.859558] Bluetooth: L2CAP socket layer initialized
[ 21.859567] Bluetooth: SCO socket layer initialized
[ 21.862618] usbcore: registered new interface driver btusb
[ 21.874318] cfg80211: Calling CRDA to update world regulatory domain
[ 21.879196] cfg80211: World regulatory domain updated:
[ 21.879199] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.879202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.879204] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.879206] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.879207] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.879209] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.898708] vboxdrv: Found 4 processor cores.
[ 21.899024] VBoxDrv: dbg - g_abExecMemory=ffffffffa0356ca0
[ 21.899072] vboxdrv: fAsync=0 offMin=0xf0 offMax=0x12ae
[ 21.899130] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 21.899133] vboxdrv: Successfully loaded version 4.1.8_OSE (interface 0x00190000).
[ 21.963497] iTCO_vendor_support: vendor-support=0
[ 22.233542] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 22.233575] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 22.233767] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 22.289261] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 22.289288] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.289339] r8169 0000:01:00.0: setting latency timer to 64
[ 22.289396] r8169 0000:01:00.0: irq 42 for MSI/MSI-X
[ 22.289567] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc9000061c000, 1c:c1:de:a6:00:2d, XID 083000c0 IRQ 42
[ 22.297256] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 22.297357] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 22.297700] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.309247] udevd[511]: renamed network interface eth0 to em1
[ 22.312777] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 22.312849] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 22.312878] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 22.329749] ALSA sound/pci/hda/patch_sigmatel.c:5636 mute LED gpio 1 polarity 1
[ 22.329754] ALSA sound/pci/hda/hda_codec.c:4895 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 22.329757] ALSA sound/pci/hda/hda_codec.c:4899 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 22.329759] ALSA sound/pci/hda/hda_codec.c:4903 hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 22.329760] ALSA sound/pci/hda/hda_codec.c:4904 mono: mono_out=0x0
[ 22.329762] ALSA sound/pci/hda/hda_codec.c:4908 inputs:
[ 22.329763] ALSA sound/pci/hda/hda_codec.c:4912 Mic=0xc
[ 22.329765] ALSA sound/pci/hda/hda_codec.c:4914
[ 22.329954] ALSA sound/pci/hda/patch_sigmatel.c:3116 stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
[ 22.332214] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 22.339507] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 22.339694] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 22.339913] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 22.340182] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 22.372392] hp_accel: laptop model unknown, using default axes configuration
[ 22.372994] lis3lv02d: 8 bits sensor found
[ 22.375036] Linux media interface: v0.10
[ 22.376481] Linux video capture interface: v2.00
[ 22.376970] uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a28)
[ 22.385407] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input9
[ 22.385588] usbcore: registered new interface driver uvcvideo
[ 22.385592] USB Video Class driver (1.1.1)
[ 22.409085] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[ 22.409697] Registered led device: hp::hddprotect
[ 22.409726] hp_accel: driver loaded
[ 22.715585] input: HP WMI hotkeys as /devices/virtual/input/input11
[ 22.949921] Adding 4610616k swap on /dev/sda8. Priority:0 extents:1 across:4610616k
[ 22.978895] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 22.996460] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 22.996670] brcms_module_init: register returned 0
[ 22.999940] cfg80211: Calling CRDA for country: US
[ 23.003294] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 23.004410] cfg80211: Regulatory domain changed to country: US
[ 23.004414] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.004417] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 23.004420] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 23.004423] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.004426] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.004428] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.004430] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 23.013884] cfg80211: Calling CRDA for country: FR
[ 23.016775] cfg80211: Regulatory domain changed to country: FR
[ 23.016778] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.016781] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 23.016783] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 23.016786] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 23.016788] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 23.087201] fuse init (API version 7.17)
[ 23.093632] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 23.100864] mount[931]: mount\xffffffc2\xffffffa0\xffffffa0: fusectl est d\xffffffc3\xffffffa9\xffffffa9j\xffffffc3\xffffffa0\xffffffa0 mont\xffffffc3\xffffffa9\xffffffa9 ou /sys/fs/fuse/connections est occup\xffffffc3\xffffffa9\xffffffa9
[ 23.101872] mount[931]: mount\xffffffc2\xffffffa0\xffffffa0: selon mtab, fusectl est d\xffffffc3\xffffffa9\xffffffa9j\xffffffc3\xffffffa0\xffffffa0 mont\xffffffc3\xffffffa9\xffffffa9 sur /sys/fs/fuse/connections
[ 23.102648] systemd[1]: sys-fs-fuse-connections.mount mount process exited, code=exited status=32
[ 23.158473] rmmod[935]: ERROR: Module scsi_wait_scan does not exist in /proc/modules
[ 23.270099] SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
[ 23.271234] ntfs-3g[939]: Version 2011.4.12 integrated FUSE 27
[ 23.271242] ntfs-3g[939]: Mounted /dev/sda1 (Read-Write, label "SYSTEM", NTFS 3.1)
[ 23.271248] ntfs-3g[939]: Cmdline options: rw
[ 23.271253] ntfs-3g[939]: Mount options: rw,allow_other,nonempty,atime,fsname=/dev/sda1,blkdev,blksize=4096
[ 23.271259] ntfs-3g[939]: Ownership and permissions disabled, configuration type 1
[ 23.436938] SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
[ 23.438097] ntfs-3g[940]: Version 2011.4.12 integrated FUSE 27
[ 23.438165] ntfs-3g[940]: Mounted /dev/sda2 (Read-Write, label "", NTFS 3.1)
[ 23.438233] ntfs-3g[940]: Cmdline options: rw
[ 23.438247] ntfs-3g[940]: Mount options: rw,allow_other,nonempty,atime,fsname=/dev/sda2,blkdev,blksize=4096
[ 23.438260] ntfs-3g[940]: Ownership and permissions disabled, configuration type 1
[ 23.908911] fedora-storage-init[944]: Configuration du gestionnaire de volume logique\xffffffc2\xffffffa0\xffffffa0: No volume groups found
[ 23.918765] fedora-storage-init[944]: [ OK ]
[ 23.967877] systemd-fsck[895]: fsck: fsck.btrfs: not found
[ 23.967942] systemd-fsck[895]: fsck: error 2 while executing fsck.btrfs for /dev/sda6
[ 23.968202] systemd-fsck[895]: fsck failed with error code 8.
[ 23.968216] systemd-fsck[895]: Ignoring error.
[ 24.079590] device label home devid 1 transid 16129 /dev/sda6
[ 24.474536] fedora-storage-init[950]: Configuration du gestionnaire de volume logique\xffffffc2\xffffffa0\xffffffa0: No volume groups found
[ 24.481059] fedora-storage-init[950]: [ OK ]
[ 24.700403] lvm[971]: No volume groups found
[ 26.934592] SELinux: initialized (dev sda6, type btrfs), uses xattr
[ 26.972312] systemd-tmpfiles[976]: Successfully loaded SELinux database in 12ms 852us, size on heap is 481K.
[ 27.350010] bluetoothd[986]: Bluetooth daemon 4.96
[ 27.350027] bluetoothd[986]: bluetoothd[986]: Bluetooth daemon 4.96
[ 27.415553] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 27.421886] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 27.426415] iptables.init[991]: iptables\xffffffc2\xffffffa0\xffffffa0: Application des r\xffffffc3\xffffffa8\xffffffa8gles du pare-feu\xffffffc2\xffffffa0\xffffffa0: [ OK ]
[ 27.434768] ip6tables.init[988]: ip6tables\xffffffc2\xffffffa0\xffffffa0: Application des r\xffffffc3\xffffffa8\xffffffa8gles du pare-feu\xffffffc2\xffffffa0\xffffffa0: [ OK ]
[ 27.477782] abrtd[1030]: Init complete, entering main loop
[ 27.478741] mcelog[1031]: mcelog read: No such device
[ 27.584343] NetworkManager[1039]: <info> NetworkManager (version 0.9.2-1.fc16) is starting...
[ 27.584352] NetworkManager[1039]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
[ 27.584681] NetworkManager[1039]: NetworkManager[1039]: <info> NetworkManager (version 0.9.2-1.fc16) is starting...
[ 27.584703] NetworkManager[1039]: NetworkManager[1039]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
[ 27.601213] avahi-daemon[1040]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
[ 27.601363] avahi-daemon[1040]: Successfully dropped root privileges.
[ 27.601687] avahi-daemon[1040]: avahi-daemon 0.6.30 starting up.
[ 27.694521] /usr/sbin/crond[1004]: (CRON) INFO (running with inotify support)
[ 27.822384] mcelog[1044]: mcelog: Unsupported new Family 6 Model 25 CPU: only decoding architectural errors
[ 28.001668] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.001673] Bluetooth: BNEP filters: protocol multicast
[ 28.126834] Bluetooth: RFCOMM TTY layer initialized
[ 28.126839] Bluetooth: RFCOMM socket layer initialized
[ 28.126841] Bluetooth: RFCOMM ver 1.11
[ 28.209930] r8169 0000:01:00.0: em1: link down
[ 28.210544] ADDRCONF(NETDEV_UP): em1: link is not ready
[ 28.263500] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 28.263510] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 28.264496] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.902822] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 31.101978] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 31.301653] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 31.501297] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 37.434936] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 37.633752] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 37.833457] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 38.033035] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 38.090007] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 40.755251] lp: driver loaded but no devices found
[ 40.766629] ppdev: user-space parallel port driver
[ 43.973242] wlan0: authenticate with 00:09:0f:e9:27:72 (try 1)
[ 43.974856] wlan0: authenticated
[ 43.978500] wlan0: associate with 00:09:0f:e9:27:72 (try 1)
[ 43.985791] wlan0: RX AssocResp from 00:09:0f:e9:27:72 (capab=0x131 status=0 aid=15)
[ 43.985798] wlan0: associated
[ 43.985804] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 43.985807] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 43.986322] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 43.986329] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 43.986332] ieee80211 phy0: changing basic rates failed: -22
[ 43.986335] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 43.986675] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 43.986774] cfg80211: Calling CRDA for country: FR
[ 43.994492] cfg80211: Regulatory domain changed to country: FR
[ 43.994495] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 43.994497] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 43.994499] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 43.994501] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 43.994503] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 44.043205] wlan0: Wrong control channel in association response: configured center-freq: 2437 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT.
[ 44.188936] wlan0: moving STA 00:09:0f:e9:27:72 to state 3
[ 54.661400] wlan0: no IPv6 routers present
[ 64.070784] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 69.245855] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 69.246165] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 69.247237] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 180.725947] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 218.460095] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 218.461333] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 218.648665] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 218.648677] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 218.648685] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 218.648692] wlan0: deauthenticating from 00:09:0f:e9:27:72 by local choice (reason=3)
[ 218.676782] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 218.676786] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 218.676789] wlan0: moving STA 00:09:0f:e9:27:72 to state 0
[ 218.684855] cfg80211: Calling CRDA to update world regulatory domain
[ 218.701057] cfg80211: World regulatory domain updated:
[ 218.701062] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 218.701066] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 218.701069] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 218.701072] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 218.701075] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 218.701077] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 218.701094] cfg80211: Calling CRDA for country: FR
[ 218.706033] cfg80211: Regulatory domain changed to country: FR
[ 218.706036] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 218.706038] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 218.706040] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 218.706042] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 218.706043] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 220.333453] PM: Syncing filesystems ... done.
[ 220.399675] PM: Preparing system for mem sleep
[ 220.498875] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 220.509668] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 220.520604] PM: Entering mem sleep
[ 220.520743] Suspending console(s) (use no_console_suspend to debug)
[ 220.521120] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 220.521275] sd 0:0:0:0: [sda] Stopping disk
[ 220.577481] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[ 220.577491] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 220.769447] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 221.120617] PM: suspend of devices complete after 600.761 msecs
[ 221.131661] r8169 0000:01:00.0: PME# enabled
[ 221.140495] r8169 0000:01:00.0: wake-up capability enabled by ACPI
[ 221.173511] PM: late suspend of devices complete after 52.975 msecs
[ 221.173670] ACPI: Preparing to enter system sleep state S3
[ 221.219725] PM: Saving platform NVS memory
[ 221.223356] Disabling non-boot CPUs ...
[ 221.225547] CPU 1 is now offline
[ 221.227743] CPU 2 is now offline
[ 221.229534] CPU 3 is now offline
[ 221.229998] Extended CMOS year: 2000
[ 221.230207] ACPI: Low-level resume complete
[ 221.230264] PM: Restoring platform NVS memory
[ 221.230769] CPU0: Thermal monitoring handled by SMI
[ 221.230827] Extended CMOS year: 2000
[ 221.231051] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
[ 221.231058] Enabling non-boot CPUs ...
[ 221.231195] Booting Node 0 Processor 1 APIC 0x1
[ 221.231197] smpboot cpu 1: start_ip = 98000
[ 221.242198] Calibrating delay loop (skipped) already calibrated this CPU
[ 221.242223] CPU1: Thermal monitoring handled by SMI
[ 221.262579] NMI watchdog enabled, takes one hw-pmu counter.
[ 221.262840] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 221.262845] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
[ 221.262850] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
[ 221.262854] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880150d998c0), AE_NOT_FOUND (20110623/psparse-536)
[ 221.262887] CPU1 is up
[ 221.262960] Booting Node 0 Processor 2 APIC 0x4
[ 221.262961] smpboot cpu 2: start_ip = 98000
[ 221.263048] Switched to NOHz mode on CPU #1
[ 221.273961] Calibrating delay loop (skipped) already calibrated this CPU
[ 221.273986] CPU2: Thermal monitoring handled by SMI
[ 221.294311] NMI watchdog enabled, takes one hw-pmu counter.
[ 221.294609] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 221.294615] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
[ 221.294620] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
[ 221.294624] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880150d99b18), AE_NOT_FOUND (20110623/psparse-536)
[ 221.294821] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
[ 221.294835] CPU2 is up
[ 221.294902] Booting Node 0 Processor 3 APIC 0x5
[ 221.294903] smpboot cpu 3: start_ip = 98000
[ 221.294992] Switched to NOHz mode on CPU #2
[ 221.305903] Calibrating delay loop (skipped) already calibrated this CPU
[ 221.305925] CPU3: Thermal monitoring handled by SMI
[ 221.326260] NMI watchdog enabled, takes one hw-pmu counter.
[ 221.326531] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 221.326536] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
[ 221.326541] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
[ 221.326545] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880150d99a78), AE_NOT_FOUND (20110623/psparse-536)
[ 221.326601] CPU3 is up
[ 221.328445] Switched to NOHz mode on CPU #3
[ 221.328833] ACPI: Waking up from system sleep state S3
[ 221.449332] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[ 221.449368] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[ 221.449405] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[ 221.449449] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 221.449478] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020)
[ 221.449555] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[ 221.449577] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[ 221.449652] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 221.449776] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 221.449864] bcma-pci-bridge 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 221.449883] bcma-pci-bridge 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xb2400004)
[ 221.449888] bcma-pci-bridge 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 221.449895] bcma-pci-bridge 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 221.450025] PM: early resume of devices complete after 0.772 msecs
[ 221.450134] i915 0000:00:02.0: setting latency timer to 64
[ 221.450165] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 221.450171] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 221.450173] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 221.450181] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 221.450185] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 221.450195] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 221.450218] pci 0000:00:1e.0: setting latency timer to 64
[ 221.450235] ahci 0000:00:1f.2: setting latency timer to 64
[ 221.450249] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 221.450471] sd 0:0:0:0: [sda] Starting disk
[ 221.515749] power_supply BAT0: parent PNP0C0A:00 should not be sleeping
[ 221.525201] r8169 0000:01:00.0: wake-up capability disabled by ACPI
[ 221.525207] r8169 0000:01:00.0: PME# disabled
[ 221.598998] [drm:ironlake_update_pch_refclk] *ERROR* enabling SSC on PCH
[ 221.620516] Extended CMOS year: 2000
[ 221.681573] usb 1-1.4: reset full speed USB device number 3 using ehci_hcd
[ 221.754254] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 221.758277] ata5: SATA link down (SStatus 0 SControl 300)
[ 221.823352] ata2.00: configured for UDMA/100
[ 221.839256] usb 2-1.3: reset full speed USB device number 3 using ehci_hcd
[ 221.926093] btusb 2-1.3:1.0: no reset_resume for driver btusb?
[ 221.926098] btusb 2-1.3:1.1: no reset_resume for driver btusb?
[ 221.997001] usb 2-1.6: reset high speed USB device number 5 using ehci_hcd
[ 223.232724] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 223.234850] ata1.00: configured for UDMA/100
[ 223.899975] PM: resume of devices complete after 2454.154 msecs
[ 223.900462] PM: Finishing wakeup.
[ 223.900506] Restarting tasks ... done.
[ 223.908329] video LNXVIDEO:00: Restoring backlight state
[ 224.278171] r8169 0000:01:00.0: em1: link down
[ 224.278594] ADDRCONF(NETDEV_UP): em1: link is not ready
[ 224.326654] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 224.326668] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 224.328942] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 224.908786] Bluetooth: hci0 command tx timeout
[ 226.948990] wlan0: authenticate with 00:09:0f:e9:27:72 (try 1)
[ 226.950597] wlan0: authenticated
[ 226.950805] wlan0: associate with 00:09:0f:e9:27:72 (try 1)
[ 226.956725] wlan0: RX AssocResp from 00:09:0f:e9:27:72 (capab=0x131 status=0 aid=15)
[ 226.956731] wlan0: associated
[ 226.956736] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 226.956739] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 226.957306] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 226.957317] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 226.957323] ieee80211 phy0: changing basic rates failed: -22
[ 226.957328] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 226.958348] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 226.958455] cfg80211: Calling CRDA for country: FR
[ 226.968428] wlan0: Wrong control channel in association response: configured center-freq: 2437 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT.
[ 226.972046] cfg80211: Regulatory domain changed to country: FR
[ 226.972051] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 226.972056] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 226.972061] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 226.972065] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 226.972068] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 227.160227] wlan0: moving STA 00:09:0f:e9:27:72 to state 3
[ 237.265328] wlan0: no IPv6 routers present
[ 247.751474] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 270.781609] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 275.168086] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 275.169564] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 276.720001] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 277.426568] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 278.312414] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 278.313361] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 278.313957] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 281.662084] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 281.662497] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 282.802213] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 282.802331] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 282.802339] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 282.802346] wlan0: deauthenticating from 00:09:0f:e9:27:72 by local choice (reason=3)
[ 282.833231] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 282.833236] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 282.833239] wlan0: moving STA 00:09:0f:e9:27:72 to state 0
[ 282.844268] cfg80211: Calling CRDA to update world regulatory domain
[ 282.856336] cfg80211: World regulatory domain updated:
[ 282.856340] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 282.856343] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 282.856346] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 282.856349] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 282.856352] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 282.856355] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 282.856371] cfg80211: Calling CRDA for country: FR
[ 282.859650] cfg80211: Regulatory domain changed to country: FR
[ 282.859654] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 282.859656] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 282.859659] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 282.859661] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 282.859664] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 284.251041] PM: Syncing filesystems ... done.
[ 284.342340] PM: Preparing system for mem sleep
[ 284.408714] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 284.419553] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 284.430511] PM: Entering mem sleep
[ 284.430659] Suspending console(s) (use no_console_suspend to debug)
[ 284.431037] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 284.431159] sd 0:0:0:0: [sda] Stopping disk
[ 284.487419] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 284.487427] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[ 284.577914] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 285.032523] PM: suspend of devices complete after 602.744 msecs
[ 285.043529] r8169 0000:01:00.0: PME# enabled
[ 285.052401] r8169 0000:01:00.0: wake-up capability enabled by ACPI
[ 285.085413] PM: late suspend of devices complete after 52.980 msecs
[ 285.085570] ACPI: Preparing to enter system sleep state S3
[ 285.131572] PM: Saving platform NVS memory
[ 285.134981] Disabling non-boot CPUs ...
[ 285.136847] CPU 1 is now offline
[ 285.139125] CPU 2 is now offline
[ 285.141034] CPU 3 is now offline
[ 285.141470] Extended CMOS year: 2000
[ 285.141678] ACPI: Low-level resume complete
[ 285.141735] PM: Restoring platform NVS memory
[ 285.142242] CPU0: Thermal monitoring handled by SMI
[ 285.142300] Extended CMOS year: 2000
[ 285.142525] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
[ 285.142532] Enabling non-boot CPUs ...
[ 285.142657] Booting Node 0 Processor 1 APIC 0x1
[ 285.142659] smpboot cpu 1: start_ip = 98000
[ 285.153661] Calibrating delay loop (skipped) already calibrated this CPU
[ 285.153686] CPU1: Thermal monitoring handled by SMI
[ 285.173946] Switched to NOHz mode on CPU #1
[ 285.174002] NMI watchdog enabled, takes one hw-pmu counter.
[ 285.174261] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 285.174266] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
[ 285.174272] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
[ 285.174276] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880150d998c0), AE_NOT_FOUND (20110623/psparse-536)
[ 285.174309] CPU1 is up
[ 285.174376] Booting Node 0 Processor 2 APIC 0x4
[ 285.174377] smpboot cpu 2: start_ip = 98000
[ 285.185377] Calibrating delay loop (skipped) already calibrated this CPU
[ 285.185401] CPU2: Thermal monitoring handled by SMI
[ 285.205664] NMI watchdog enabled, takes one hw-pmu counter.
[ 285.205891] Switched to NOHz mode on CPU #2
[ 285.205926] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 285.205931] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
[ 285.205937] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
[ 285.205941] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880150d99b18), AE_NOT_FOUND (20110623/psparse-536)
[ 285.206136] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
[ 285.206146] CPU2 is up
[ 285.206214] Booting Node 0 Processor 3 APIC 0x5
[ 285.206215] smpboot cpu 3: start_ip = 98000
[ 285.217215] Calibrating delay loop (skipped) already calibrated this CPU
[ 285.217238] CPU3: Thermal monitoring handled by SMI
[ 285.237533] NMI watchdog enabled, takes one hw-pmu counter.
[ 285.237809] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 285.237815] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
[ 285.237820] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
[ 285.237824] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880150d99a78), AE_NOT_FOUND (20110623/psparse-536)
[ 285.237856] Switched to NOHz mode on CPU #3
[ 285.237881] CPU3 is up
[ 285.240107] ACPI: Waking up from system sleep state S3
[ 285.323461] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[ 285.323522] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[ 285.323557] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 285.323661] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[ 285.323689] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[ 285.323762] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 285.323876] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 285.323963] bcma-pci-bridge 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 285.323982] bcma-pci-bridge 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xb2400004)
[ 285.323987] bcma-pci-bridge 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 285.323994] bcma-pci-bridge 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 285.324124] PM: early resume of devices complete after 0.717 msecs
[ 285.324254] i915 0000:00:02.0: setting latency timer to 64
[ 285.324262] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 285.324268] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 285.324272] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 285.324276] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 285.324278] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 285.324282] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 285.324321] pci 0000:00:1e.0: setting latency timer to 64
[ 285.324330] ahci 0000:00:1f.2: setting latency timer to 64
[ 285.324332] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 285.324535] sd 0:0:0:0: [sda] Starting disk
[ 285.332690] r8169 0000:01:00.0: wake-up capability disabled by ACPI
[ 285.332698] r8169 0000:01:00.0: PME# disabled
[ 285.390513] Extended CMOS year: 2000
[ 285.472960] [drm:ironlake_update_pch_refclk] *ERROR* enabling SSC on PCH
[ 285.555507] usb 2-1.6: reset high speed USB device number 5 using ehci_hcd
[ 285.628258] ata5: SATA link down (SStatus 0 SControl 300)
[ 285.630215] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 285.692126] ata2.00: configured for UDMA/100
[ 285.704241] usb 1-1.4: reset full speed USB device number 3 using ehci_hcd
[ 285.861991] usb 2-1.3: reset full speed USB device number 3 using ehci_hcd
[ 285.949086] btusb 2-1.3:1.0: no reset_resume for driver btusb?
[ 285.949091] btusb 2-1.3:1.1: no reset_resume for driver btusb?
[ 287.210477] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 287.212586] ata1.00: configured for UDMA/100
[ 287.876753] PM: resume of devices complete after 2556.995 msecs
[ 287.877293] PM: Finishing wakeup.
[ 287.877295] Restarting tasks ... done.
[ 287.880902] video LNXVIDEO:00: Restoring backlight state
[ 288.114565] r8169 0000:01:00.0: em1: link down
[ 288.115045] ADDRCONF(NETDEV_UP): em1: link is not ready
[ 288.163179] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 288.163191] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 288.165302] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 288.886571] Bluetooth: hci0 command tx timeout
[ 290.785775] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 290.984928] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 291.184659] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 291.384246] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 297.312076] wlan0: authenticate with 00:09:0f:e9:27:72 (try 1)
[ 297.313755] wlan0: authenticated
[ 297.313968] wlan0: associate with 00:09:0f:e9:27:72 (try 1)
[ 297.319105] wlan0: RX AssocResp from 00:09:0f:e9:27:72 (capab=0x131 status=0 aid=15)
[ 297.319113] wlan0: associated
[ 297.319120] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 297.319124] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 297.319695] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 297.319710] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 297.319719] ieee80211 phy0: changing basic rates failed: -22
[ 297.319726] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 297.320667] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 297.320775] cfg80211: Calling CRDA for country: FR
[ 297.331387] cfg80211: Regulatory domain changed to country: FR
[ 297.331390] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 297.331392] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 297.331394] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 297.331396] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 297.331398] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 297.365453] wlan0: Wrong control channel in association response: configured center-freq: 2437 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT.
[ 297.522812] wlan0: moving STA 00:09:0f:e9:27:72 to state 3
[ 307.711907] wlan0: no IPv6 routers present
[ 317.630884] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 518.283490] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 518.283754] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 518.284125] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 584.463545] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 644.353005] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 735.186771] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 804.004652] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 1061.517139] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 1224.336449] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 1459.193488] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1459.193502] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 1459.193509] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 1459.195080] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 1459.195086] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 1459.195091] wlan0: moving STA 00:09:0f:e9:27:72 to state 0
[ 1459.212960] cfg80211: Calling CRDA to update world regulatory domain
[ 1459.226598] cfg80211: World regulatory domain updated:
[ 1459.226603] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1459.226608] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1459.226613] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1459.226617] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1459.226621] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1459.226625] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1459.226643] cfg80211: Calling CRDA for country: FR
[ 1459.231720] cfg80211: Regulatory domain changed to country: FR
[ 1459.231725] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1459.231730] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1459.231734] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1459.231738] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1459.231741] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 1460.224230] wlan0: authenticate with 00:09:0f:e9:27:72 (try 1)
[ 1460.225953] wlan0: authenticated
[ 1460.226107] wlan0: associate with 00:09:0f:e9:27:72 (try 1)
[ 1460.231518] wlan0: RX ReassocResp from 00:09:0f:e9:27:72 (capab=0x131 status=0 aid=15)
[ 1460.231522] wlan0: associated
[ 1460.231526] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 1460.231528] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 1460.232101] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1460.232110] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 1460.232114] ieee80211 phy0: changing basic rates failed: -22
[ 1460.232117] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 1460.232588] cfg80211: Calling CRDA for country: FR
[ 1460.236326] cfg80211: Regulatory domain changed to country: FR
[ 1460.236329] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1460.236332] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1460.236334] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1460.236337] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1460.236339] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 1460.435935] wlan0: moving STA 00:09:0f:e9:27:72 to state 3
[ 1473.956688] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 1539.878744] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 1773.733003] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 1807.451616] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 1807.452305] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 1925.321534] wlan0: disassociated from 00:09:0f:e9:27:72 (Reason: 8)
[ 1925.322580] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1925.322595] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 1925.322604] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 1925.324188] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 1925.324193] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 1925.324196] wlan0: moving STA 00:09:0f:e9:27:72 to state 0
[ 1925.330163] wlan0: deauthenticating from 00:09:0f:e9:27:72 by local choice (reason=3)
[ 1925.330206] cfg80211: Calling CRDA to update world regulatory domain
[ 1925.339504] cfg80211: World regulatory domain updated:
[ 1925.339510] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1925.339515] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1925.339520] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1925.339524] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1925.339528] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1925.339532] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1925.339550] cfg80211: Calling CRDA for country: FR
[ 1925.344609] cfg80211: Regulatory domain changed to country: FR
[ 1925.344614] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1925.344619] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1925.344624] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1925.344627] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1925.344631] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 1926.358401] wlan0: authenticate with 00:09:0f:e9:27:72 (try 1)
[ 1926.557280] wlan0: authenticate with 00:09:0f:e9:27:72 (try 2)
[ 1926.756967] wlan0: authenticate with 00:09:0f:e9:27:72 (try 3)
[ 1926.956667] wlan0: authentication with 00:09:0f:e9:27:72 timed out
[ 1932.880048] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 1933.079366] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 1933.279085] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 1933.478806] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 1937.654398] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 1937.854159] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 1938.053818] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 1938.253561] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 1944.175831] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 1944.375248] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 1944.574933] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 1944.774690] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 1950.694521] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 1950.893418] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 1951.093073] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 1951.292736] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 1957.218535] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 1957.417484] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 1957.617169] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 1957.816855] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 1963.744730] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 1963.943588] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 1964.143271] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 1964.342970] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 1970.264094] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 1970.463711] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 1970.663421] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 1970.863082] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 1976.790902] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 1976.989815] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 1977.189490] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 1977.389158] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 1983.317957] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 1983.516924] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 1983.716597] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 1983.916331] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 1985.819658] usb 2-1.3: USB disconnect, device number 3
[ 1987.325318] usb 2-1.3: new full speed USB device number 6 using ehci_hcd
[ 1987.414820] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=21b4
[ 1987.414827] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1987.414832] usb 2-1.3: Product: Broadcom 2070 Bluetooth
[ 1987.414835] usb 2-1.3: Manufacturer: Broadcom Corp
[ 1987.414838] usb 2-1.3: SerialNumber: 002713DDD4FC
[ 1990.683075] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1990.683089] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 1990.685528] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1993.312810] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 1993.511736] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 1993.711441] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 1993.911139] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 1999.833913] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2000.032851] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2000.232544] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2000.432258] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2006.356063] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2006.554953] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2006.754670] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2006.954364] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2012.875115] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2013.074079] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2013.273770] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2013.473467] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2032.350193] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 2032.365330] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 2032.365648] cfg80211: Calling CRDA for country: US
[ 2032.365691] brcms_module_init: register returned 0
[ 2032.373428] cfg80211: Current regulatory domain intersected:
[ 2032.373431] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2032.373434] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2032.373437] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1700 mBm)
[ 2032.373440] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2032.373443] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2032.373446] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2032.460212] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2032.460226] ieee80211 phy1: brcms_ops_config: change power-save mode: false (implement)
[ 2032.461077] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2034.582275] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2034.781177] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2034.980882] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2035.180549] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2035.521072] cfg80211: Calling CRDA to update world regulatory domain
[ 2035.526816] cfg80211: World regulatory domain updated:
[ 2035.526821] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2035.526826] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2035.526831] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2035.526835] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2035.526839] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2035.526843] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2040.852471] wlan0: authenticate with 00:09:0f:e9:27:72 (try 1)
[ 2040.854108] wlan0: authenticated
[ 2040.857768] wlan0: associate with 00:09:0f:e9:27:72 (try 1)
[ 2040.866721] wlan0: RX AssocResp from 00:09:0f:e9:27:72 (capab=0x131 status=0 aid=15)
[ 2040.866727] wlan0: associated
[ 2040.866732] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 2040.866735] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 2040.867250] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 2040.867261] ieee80211 phy1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 2040.867267] ieee80211 phy1: changing basic rates failed: -22
[ 2040.867272] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 2040.867994] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2040.868097] cfg80211: Calling CRDA for country: FR
[ 2040.873079] cfg80211: Regulatory domain changed to country: FR
[ 2040.873084] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2040.873089] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2040.873093] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2040.873097] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2040.873101] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 2041.072763] wlan0: moving STA 00:09:0f:e9:27:72 to state 3
[ 2041.155686] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 2042.713161] device fsid be8d8291-3821-4584-a9a7-776b91d4d5a5 devid 1 transid 59746 /dev/sda5
[ 2043.040847] SELinux: initialized (dev sda5, type btrfs), uses xattr
[ 2043.108596] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[ 2043.109198] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2043.109206] SELinux: initialized (dev sda3, type ext4), uses xattr
[ 2044.130151] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 2051.618591] wlan0: no IPv6 routers present
[ 2055.298569] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2055.298583] ieee80211 phy1: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 2055.298590] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 2055.306399] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 2055.306403] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 2055.306406] wlan0: moving STA 00:09:0f:e9:27:72 to state 0
[ 2055.323026] cfg80211: Calling CRDA to update world regulatory domain
[ 2055.333639] cfg80211: World regulatory domain updated:
[ 2055.333644] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2055.333649] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2055.333654] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2055.333658] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2055.333662] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2055.333666] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2056.084011] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2056.283567] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2056.483249] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2056.682922] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2062.360854] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2062.560029] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2062.759729] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2062.959447] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2068.636705] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2068.835550] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2069.035250] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2069.234867] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2074.910390] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2075.110063] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2075.309762] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2075.509481] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2081.184945] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2081.384474] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2081.584156] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2081.783927] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2087.462157] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2087.661013] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2087.860729] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2088.060409] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2093.733988] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2093.933487] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2094.133162] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2094.332930] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2142.011705] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 2142.026809] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 2142.027103] brcms_module_init: register returned 0
[ 2142.028332] cfg80211: Calling CRDA for country: US
[ 2142.034037] cfg80211: Regulatory domain changed to country: US
[ 2142.034040] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2142.034042] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 2142.034044] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 2142.034046] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2142.034048] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2142.034050] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2142.034051] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 2142.039747] cfg80211: Calling CRDA for country: FR
[ 2142.044480] cfg80211: Regulatory domain changed to country: FR
[ 2142.044482] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2142.044485] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2142.044487] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2142.044488] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2142.044490] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 2142.088808] ieee80211 phy2: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2142.088818] ieee80211 phy2: brcms_ops_config: change power-save mode: false (implement)
[ 2142.089285] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2197.666571] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2197.865825] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2198.065517] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2198.265215] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2204.200657] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2204.399976] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2204.599679] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2204.799328] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2210.730095] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2210.929075] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2211.128781] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2211.328459] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2217.253921] wlan0: direct probe to 00:09:0f:e9:27:72 (try 1/3)
[ 2217.453180] wlan0: direct probe to 00:09:0f:e9:27:72 (try 2/3)
[ 2217.652881] wlan0: direct probe to 00:09:0f:e9:27:72 (try 3/3)
[ 2217.852497] wlan0: direct probe to 00:09:0f:e9:27:72 timed out
[ 2232.491845] wlan0: authenticate with 00:09:0f:e9:27:72 (try 1)
[ 2232.493346] wlan0: authenticated
[ 2232.496954] wlan0: associate with 00:09:0f:e9:27:72 (try 1)
[ 2232.502446] wlan0: RX AssocResp from 00:09:0f:e9:27:72 (capab=0x131 status=0 aid=15)
[ 2232.502451] wlan0: associated
[ 2232.502455] wlan0: moving STA 00:09:0f:e9:27:72 to state 1
[ 2232.502458] wlan0: moving STA 00:09:0f:e9:27:72 to state 2
[ 2232.502948] ieee80211 phy2: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 2232.502956] ieee80211 phy2: brcmsmac: brcms_ops_bss_info_changed: associated
[ 2232.502961] ieee80211 phy2: changing basic rates failed: -22
[ 2232.502965] ieee80211 phy2: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 2232.503591] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2232.503748] cfg80211: Calling CRDA for country: FR
[ 2232.511942] cfg80211: Regulatory domain changed to country: FR
[ 2232.511947] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2232.511952] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2232.511956] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2232.511960] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2232.511964] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 2232.714680] wlan0: moving STA 00:09:0f:e9:27:72 to state 3
[ 2243.519559] wlan0: no IPv6 routers present
[ 2252.529574] ieee80211 phy2: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 2329.667284] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2372.325786] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2372.326793] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2372.327578] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2379.781174] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2827.121531] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2827.122003] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2853.753418] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2857.755344] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2857.756286] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2857.756935] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2923.632459] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2923.632766] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[ 2923.633038] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[-- Attachment #3: messages --]
[-- Type: application/octet-stream, Size: 385346 bytes --]
Jan 24 10:31:12 milan kernel: [85135.927803] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jan 24 10:31:12 milan kernel: [85135.938524] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jan 24 10:31:12 milan kernel: [85135.949652] Suspending console(s) (use no_console_suspend to debug)
Jan 24 10:31:12 milan kernel: [85135.950411] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jan 24 10:31:12 milan kernel: [85135.950669] sd 0:0:0:0: [sda] Stopping disk
Jan 24 10:31:12 milan kernel: [85135.996534] bcma-pci-bridge 0000:02:00.0: PCI INT A disabled
Jan 24 10:31:12 milan kernel: [85136.007391] ehci_hcd 0000:00:1d.0: PCI INT A disabled
Jan 24 10:31:12 milan kernel: [85136.007398] ehci_hcd 0000:00:1a.0: PCI INT A disabled
Jan 24 10:31:12 milan kernel: [85136.097951] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Jan 24 10:31:12 milan kernel: [85136.544520] PM: suspend of devices complete after 595.737 msecs
Jan 24 10:31:12 milan kernel: [85136.553431] r8169 0000:01:00.0: wake-up capability enabled by ACPI
Jan 24 10:31:12 milan kernel: [85136.586433] PM: late suspend of devices complete after 41.982 msecs
Jan 24 10:31:12 milan kernel: [85136.586593] ACPI: Preparing to enter system sleep state S3
Jan 24 10:31:12 milan kernel: [85136.632606] PM: Saving platform NVS memory
Jan 24 10:31:12 milan kernel: [85136.636488] Disabling non-boot CPUs ...
Jan 24 10:31:12 milan kernel: [85136.638325] CPU 1 is now offline
Jan 24 10:31:12 milan kernel: [85136.640403] CPU 2 is now offline
Jan 24 10:31:12 milan kernel: [85136.642243] CPU 3 is now offline
Jan 24 10:31:12 milan kernel: [85136.642664] Extended CMOS year: 2000
Jan 24 10:31:12 milan kernel: [85136.642874] ACPI: Low-level resume complete
Jan 24 10:31:12 milan kernel: [85136.642929] PM: Restoring platform NVS memory
Jan 24 10:31:12 milan kernel: [85136.643494] Extended CMOS year: 2000
Jan 24 10:31:12 milan kernel: [85136.643716] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
Jan 24 10:31:12 milan kernel: [85136.643725] Enabling non-boot CPUs ...
Jan 24 10:31:12 milan kernel: [85136.643852] Booting Node 0 Processor 1 APIC 0x1
Jan 24 10:31:12 milan kernel: [85136.654857] Calibrating delay loop (skipped) already calibrated this CPU
Jan 24 10:31:12 milan kernel: [85136.675197] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:31:12 milan kernel: [85136.675466] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:31:12 milan kernel: [85136.675471] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:12 milan kernel: [85136.675477] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:12 milan kernel: [85136.675481] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880150d998c0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:12 milan kernel: [85136.675515] CPU1 is up
Jan 24 10:31:12 milan kernel: [85136.675968] Switched to NOHz mode on CPU #1
Jan 24 10:31:12 milan kernel: [85136.675998] Booting Node 0 Processor 2 APIC 0x4
Jan 24 10:31:12 milan kernel: [85136.686999] Calibrating delay loop (skipped) already calibrated this CPU
Jan 24 10:31:12 milan kernel: [85136.707309] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:31:12 milan kernel: [85136.707566] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:31:12 milan kernel: [85136.707571] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:12 milan kernel: [85136.707576] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:12 milan kernel: [85136.707580] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880150d99b18), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:12 milan kernel: [85136.707776] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
Jan 24 10:31:12 milan kernel: [85136.707789] CPU2 is up
Jan 24 10:31:12 milan kernel: [85136.707857] Booting Node 0 Processor 3 APIC 0x5
Jan 24 10:31:12 milan kernel: [85136.707912] Switched to NOHz mode on CPU #2
Jan 24 10:31:12 milan kernel: [85136.718857] Calibrating delay loop (skipped) already calibrated this CPU
Jan 24 10:31:12 milan kernel: [85136.739167] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:31:12 milan kernel: [85136.739445] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:31:12 milan kernel: [85136.739450] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:12 milan kernel: [85136.739455] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:12 milan kernel: [85136.739459] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880150d99a78), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:12 milan kernel: [85136.739512] CPU3 is up
Jan 24 10:31:12 milan kernel: [85136.741344] Switched to NOHz mode on CPU #3
Jan 24 10:31:12 milan kernel: [85136.741744] ACPI: Waking up from system sleep state S3
Jan 24 10:31:12 milan kernel: [85136.833163] PM: early resume of devices complete after 0.727 msecs
Jan 24 10:31:12 milan kernel: [85136.833278] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 24 10:31:12 milan kernel: [85136.833283] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jan 24 10:31:12 milan kernel: [85136.833327] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jan 24 10:31:12 milan kernel: [85136.833449] bcma-pci-bridge 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jan 24 10:31:12 milan kernel: [85136.833592] sd 0:0:0:0: [sda] Starting disk
Jan 24 10:31:12 milan kernel: [85136.846694] r8169 0000:01:00.0: wake-up capability disabled by ACPI
Jan 24 10:31:12 milan kernel: [85136.900510] Extended CMOS year: 2000
Jan 24 10:31:12 milan kernel: [85137.063603] usb 1-1.4: reset full speed USB device number 3 using ehci_hcd
Jan 24 10:31:12 milan kernel: [85137.139268] ata5: SATA link down (SStatus 0 SControl 300)
Jan 24 10:31:12 milan kernel: [85137.141264] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 10:31:12 milan kernel: [85137.214389] ata2.00: configured for UDMA/100
Jan 24 10:31:12 milan kernel: [85137.221203] usb 2-1.6: reset high speed USB device number 5 using ehci_hcd
Jan 24 10:31:12 milan kernel: [85137.370069] usb 2-1.3: reset full speed USB device number 3 using ehci_hcd
Jan 24 10:31:12 milan kernel: [85137.457026] btusb 2-1.3:1.0: no reset_resume for driver btusb?
Jan 24 10:31:12 milan kernel: [85137.457031] btusb 2-1.3:1.1: no reset_resume for driver btusb?
Jan 24 10:31:12 milan kernel: [85139.275512] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 24 10:31:12 milan kernel: [85139.277616] ata1.00: configured for UDMA/100
Jan 24 10:31:12 milan kernel: [85139.944826] PM: resume of devices complete after 3117.016 msecs
Jan 24 10:31:12 milan bluetoothd[960]: HCI dev 0 down
Jan 24 10:31:12 milan bluetoothd[960]: HCI dev 0 unregistered
Jan 24 10:31:12 milan bluetoothd[960]: Stopping hci0 event socket
Jan 24 10:31:12 milan bluetoothd[960]: bluetoothd[960]: HCI dev 0 down
Jan 24 10:31:12 milan bluetoothd[960]: bluetoothd[960]: HCI dev 0 unregistered
Jan 24 10:31:12 milan bluetoothd[960]: bluetoothd[960]: Stopping hci0 event socket
Jan 24 10:31:12 milan kernel: [85139.945396] Restarting tasks ... done.
Jan 24 10:31:12 milan kernel: [85139.955393] video LNXVIDEO:00: Restoring backlight state
Jan 24 10:31:12 milan systemd[1]: Service bluetooth.target is not needed anymore. Stopping.
Jan 24 10:31:12 milan dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 24 10:31:12 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 24 10:31:12 milan bluetoothd[960]: HCI dev 0 registered
Jan 24 10:31:12 milan bluetoothd[960]: bluetoothd[960]: HCI dev 0 registered
Jan 24 10:31:12 milan bluetoothd[960]: Listening for HCI events on hci0
Jan 24 10:31:12 milan bluetoothd[960]: bluetoothd[960]: Listening for HCI events on hci0
Jan 24 10:31:13 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 24 10:31:13 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 24 10:31:13 milan NetworkManager[1012]: <info> wake requested (sleeping: yes enabled: yes)
Jan 24 10:31:13 milan NetworkManager[1012]: <info> waking up and re-enabling...
Jan 24 10:31:13 milan NetworkManager[1012]: <info> (em1): now managed
Jan 24 10:31:13 milan NetworkManager[1012]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:31:13 milan NetworkManager[1012]: NetworkManager[1012]: <info> wake requested (sleeping: yes enabled: yes)
Jan 24 10:31:13 milan NetworkManager[1012]: NetworkManager[1012]: <info> waking up and re-enabling...
Jan 24 10:31:13 milan NetworkManager[1012]: NetworkManager[1012]: <info> (em1): now managed
Jan 24 10:31:13 milan NetworkManager[1012]: NetworkManager[1012]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:31:13 milan NetworkManager[1012]: <info> (em1): bringing up device.
Jan 24 10:31:13 milan NetworkManager[1012]: NetworkManager[1012]: <info> (em1): bringing up device.
Jan 24 10:31:13 milan kernel: [85140.824260] r8169 0000:01:00.0: em1: link down
Jan 24 10:31:13 milan kernel: [85140.824706] ADDRCONF(NETDEV_UP): em1: link is not ready
Jan 24 10:31:13 milan NetworkManager[1012]: <info> (em1): preparing device.
Jan 24 10:31:13 milan NetworkManager[1012]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 24 10:31:13 milan NetworkManager[1012]: NetworkManager[1012]: <info> (em1): preparing device.
Jan 24 10:31:13 milan NetworkManager[1012]: NetworkManager[1012]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 24 10:31:13 milan NetworkManager[1012]: <info> (wlan0): now managed
Jan 24 10:31:13 milan NetworkManager[1012]: NetworkManager[1012]: <info> (wlan0): now managed
Jan 24 10:31:13 milan NetworkManager[1012]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:31:13 milan NetworkManager[1012]: NetworkManager[1012]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:31:13 milan NetworkManager[1012]: <info> (wlan0): bringing up device.
Jan 24 10:31:13 milan NetworkManager[1012]: NetworkManager[1012]: <info> (wlan0): bringing up device.
Jan 24 10:31:13 milan kernel: [85140.961531] Bluetooth: hci0 command tx timeout
Jan 24 10:31:13 milan dbus-daemon[1022]: ** (upowerd:1268): WARNING **: Property get or set does not have an interface string as first arg
Jan 24 10:31:14 milan dbus[1022]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 24 10:31:14 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 24 10:31:14 milan kernel: [85142.020220] ieee80211 phy12: wl0: wlc_coreinit: ucode did not self-suspend!
Jan 24 10:31:14 milan kernel: [85142.160250] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:14 milan kernel: [85142.160262] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:14 milan kernel: [85142.258954] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:14 milan kernel: [85142.258965] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:15 milan kernel: [85142.357866] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:15 milan kernel: [85142.357878] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:15 milan bluetoothd[960]: HCI dev 0 up
Jan 24 10:31:15 milan bluetoothd[960]: bluetoothd[960]: HCI dev 0 up
Jan 24 10:31:15 milan kernel: [85142.456772] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:15 milan kernel: [85142.456786] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:15 milan dbus-daemon[1022]: Launching FprintObject
Jan 24 10:31:15 milan dbus[1022]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 24 10:31:15 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 24 10:31:15 milan dbus-daemon[1022]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Jan 24 10:31:15 milan dbus-daemon[1022]: ** Message: entering main loop
Jan 24 10:31:15 milan kernel: [85142.561149] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:15 milan kernel: [85142.561165] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:15 milan kernel: [85142.665148] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:15 milan kernel: [85142.665162] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:31:15 milan kernel: [85142.769022] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:15 milan kernel: [85142.769034] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:15 milan kernel: [85142.872862] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:15 milan kernel: [85142.872873] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:15 milan kernel: [85142.872898] ieee80211 phy12: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 10:31:15 milan kernel: [85142.872906] ieee80211 phy12: brcms_ops_config: change power-save mode: false (implement)
Jan 24 10:31:15 milan kernel: [85142.976633] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:15 milan kernel: [85142.976644] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:15 milan kernel: [85143.080401] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:15 milan kernel: [85143.080412] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:15 milan NetworkManager[1012]: <info> (wlan0): preparing device.
Jan 24 10:31:15 milan NetworkManager[1012]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 10:31:15 milan NetworkManager[1012]: NetworkManager[1012]: <info> (wlan0): preparing device.
Jan 24 10:31:15 milan kernel: [85143.082438] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 24 10:31:15 milan NetworkManager[1012]: NetworkManager[1012]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 10:31:15 milan NetworkManager[1012]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 10:31:15 milan NetworkManager[1012]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 10:31:15 milan NetworkManager[1012]: NetworkManager[1012]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 10:31:15 milan NetworkManager[1012]: NetworkManager[1012]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 10:31:15 milan NetworkManager[1012]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 10:31:15 milan NetworkManager[1012]: NetworkManager[1012]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 10:31:15 milan kernel: [85143.213087] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:15 milan kernel: [85143.213100] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:31:16 milan kernel: [85143.444367] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:16 milan kernel: [85143.444383] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:16 milan kernel: [85143.674774] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:16 milan kernel: [85143.674790] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:16 milan kernel: [85143.905251] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:16 milan kernel: [85143.905266] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:16 milan kernel: [85144.135615] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:16 milan kernel: [85144.135631] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:17 milan kernel: [85144.366257] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:17 milan kernel: [85144.366273] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:17 milan kernel: [85144.596900] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:17 milan kernel: [85144.596915] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:17 milan kernel: [85144.827434] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:17 milan kernel: [85144.827450] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:17 milan kernel: [85145.057985] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:17 milan kernel: [85145.058000] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:18 milan kernel: [85145.288550] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:18 milan kernel: [85145.288565] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:18 milan kernel: [85145.519201] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:18 milan kernel: [85145.519217] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:31:18 milan kernel: [85145.751249] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:18 milan kernel: [85145.751264] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:18 milan kernel: [85145.982736] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:18 milan kernel: [85145.982752] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:18 milan kernel: [85146.213287] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:18 milan kernel: [85146.213303] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:30 milan kernel: [85157.712796] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:31:30 milan kernel: [85157.712808] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:30 milan kernel: [85157.712822] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:30 milan kernel: [85157.813504] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:31:30 milan kernel: [85157.813516] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:30 milan kernel: [85157.813529] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:30 milan kernel: [85157.813540] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880150d998c0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:30 milan kernel: [85157.912291] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:31:30 milan kernel: [85157.912300] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:30 milan kernel: [85157.912311] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:30 milan kernel: [85157.912320] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880150d99b18), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:30 milan kernel: [85158.012134] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:31:30 milan kernel: [85158.012143] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:30 milan kernel: [85158.012154] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:30 milan kernel: [85158.012163] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880150d99a78), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:31:36 milan kernel: [85163.430604] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:36 milan kernel: [85163.430620] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000001, psm_brc 0x0000
Jan 24 10:31:36 milan kernel: [85163.662767] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:36 milan kernel: [85163.662782] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:31:36 milan kernel: [85163.894698] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:36 milan kernel: [85163.894753] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:36 milan kernel: [85164.127717] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:36 milan kernel: [85164.127733] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000001, psm_brc 0x0000
Jan 24 10:31:37 milan kernel: [85164.360147] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:37 milan kernel: [85164.360163] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:37 milan kernel: [85164.591922] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:37 milan kernel: [85164.591937] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:37 milan kernel: [85164.825181] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:37 milan kernel: [85164.825197] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000001, psm_brc 0x0000
Jan 24 10:31:37 milan kernel: [85165.056499] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:37 milan kernel: [85165.056511] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:38 milan kernel: [85165.287806] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:38 milan kernel: [85165.287823] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:38 milan kernel: [85165.518888] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:38 milan kernel: [85165.518969] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:38 milan kernel: [85165.751787] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:38 milan kernel: [85165.751802] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:38 milan kernel: [85165.984225] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:38 milan kernel: [85165.984242] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:31:38 milan kernel: [85166.216158] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:38 milan kernel: [85166.216174] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:31:39 milan kernel: [85166.448680] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:31:39 milan kernel: [85166.448694] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:31:45 milan dbus-daemon[1022]: ** Message: No devices in use, exit
Jan 24 10:32:06 milan kernel: [85193.379826] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:06 milan kernel: [85193.379842] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:06 milan kernel: [85193.609024] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:06 milan kernel: [85193.609036] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000001, psm_brc 0x0000
Jan 24 10:32:06 milan kernel: [85193.838645] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:06 milan kernel: [85193.838657] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:06 milan kernel: [85194.068232] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:06 milan kernel: [85194.068245] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:07 milan kernel: [85194.297850] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:07 milan kernel: [85194.297862] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:32:07 milan kernel: [85194.527429] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:07 milan kernel: [85194.527441] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:32:07 milan kernel: [85194.757007] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:07 milan kernel: [85194.757019] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:07 milan kernel: [85194.986654] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:07 milan kernel: [85194.986667] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:32:08 milan kernel: [85195.216302] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:08 milan kernel: [85195.216314] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:08 milan kernel: [85195.445814] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:08 milan kernel: [85195.445827] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:08 milan kernel: [85195.675438] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:08 milan kernel: [85195.675450] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:08 milan kernel: [85195.905217] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:08 milan kernel: [85195.905231] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000001, psm_brc 0x0000
Jan 24 10:32:08 milan kernel: [85196.135253] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:08 milan kernel: [85196.135265] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:09 milan kernel: [85196.365342] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:09 milan kernel: [85196.365362] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:46 milan kernel: [85233.311394] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:46 milan kernel: [85233.311409] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:46 milan kernel: [85233.541840] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:46 milan kernel: [85233.541855] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:46 milan kernel: [85233.771690] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:46 milan kernel: [85233.771703] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:46 milan kernel: [85234.003409] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:46 milan kernel: [85234.003425] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000001, psm_brc 0x0000
Jan 24 10:32:47 milan kernel: [85234.233867] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:47 milan kernel: [85234.233880] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:32:47 milan kernel: [85234.463135] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:47 milan kernel: [85234.463148] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:47 milan kernel: [85234.693448] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:47 milan kernel: [85234.693464] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:47 milan kernel: [85234.924116] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:47 milan kernel: [85234.924130] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:48 milan kernel: [85235.154237] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:48 milan kernel: [85235.154249] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:32:48 milan kernel: [85235.383709] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:48 milan kernel: [85235.383721] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:48 milan kernel: [85235.614259] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:48 milan kernel: [85235.614275] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:48 milan kernel: [85235.844029] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:48 milan kernel: [85235.844042] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:48 milan kernel: [85236.074309] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:48 milan kernel: [85236.074325] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:32:49 milan kernel: [85236.305465] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:32:49 milan kernel: [85236.305480] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:33:15 milan kernel: [85262.957574] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:15 milan kernel: [85262.957591] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:33:36 milan kernel: [85283.224096] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:36 milan kernel: [85283.224108] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:33:36 milan kernel: [85283.455244] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:36 milan kernel: [85283.455260] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x000000b1, psm_brc 0x0000
Jan 24 10:33:36 milan kernel: [85283.686048] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:36 milan kernel: [85283.686061] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:33:36 milan kernel: [85283.917737] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:36 milan kernel: [85283.917779] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:33:37 milan kernel: [85284.149689] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:37 milan kernel: [85284.149701] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:33:37 milan kernel: [85284.380753] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:37 milan kernel: [85284.380765] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:33:37 milan kernel: [85284.611182] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:37 milan kernel: [85284.611195] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:33:37 milan kernel: [85284.841683] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:37 milan kernel: [85284.841695] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:33:38 milan kernel: [85285.072541] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:38 milan kernel: [85285.072553] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:33:38 milan kernel: [85285.303656] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:38 milan kernel: [85285.303669] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000001, psm_brc 0x0000
Jan 24 10:33:38 milan kernel: [85285.535264] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:38 milan kernel: [85285.535277] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:33:38 milan ntpd[1441]: ntpd exiting on signal 15
Jan 24 10:33:38 milan kernel: [85285.765739] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:38 milan kernel: [85285.765752] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000031, psm_brc 0x0000
Jan 24 10:33:38 milan kernel: [85285.897561] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:38 milan kernel: [85285.897573] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:33:38 milan kernel: [85286.001058] ieee80211 phy12: wl0: wlc_suspend_mac_and_wait: waited 83000 uS and MI_MACSSPNDD is still not on.
Jan 24 10:33:38 milan kernel: [85286.001068] ieee80211 phy12: wl0: psmdebug 0x00ff8cf4, phydebug 0x00000000, psm_brc 0x0000
Jan 24 10:33:40 milan kernel: Kernel logging (proc) stopped.
Jan 24 10:33:40 milan rsyslogd: [origin software="rsyslogd" swVersion="5.8.5" x-pid="1029" x-info="http://www.rsyslog.com"] exiting on signal 15.
Jan 24 10:34:48 milan kernel: imklog 5.8.5, log source = /proc/kmsg started.
Jan 24 10:34:48 milan rsyslogd: [origin software="rsyslogd" swVersion="5.8.5" x-pid="1069" x-info="http://www.rsyslog.com"] start
Jan 24 10:34:48 milan kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jan 24 10:34:48 milan kernel: [ 0.000000] Initializing cgroup subsys cpu
Jan 24 10:34:48 milan kernel: [ 0.000000] Linux version 3.1.9-1.fc16.x86_64 (mockbuild@x86-15.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Fri Jan 13 16:37:42 UTC 2012
Jan 24 10:34:48 milan kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.9-1.fc16.x86_64 root=UUID=2949b379-bd76-4ed6-a2be-12a1bc4634c5 ro acpi_osi=Linux acpi_backlight=vendor rd.md=0 rd.lvm=0 rd.dm=0 quiet LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 KEYTABLE=fr
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-provided physical RAM map:
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000009b63f000 (usable)
Jan 24 10:34:47 milan sandbox[1046]: Starting sandbox[ OK ]
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved)
Jan 24 10:34:47 milan dbus-daemon[1048]: dbus[1048]: avc: netlink poll: error 4
Jan 24 10:34:47 milan dbus[1048]: avc: netlink poll: error 4
Jan 24 10:34:47 milan bluetoothd[986]: Starting SDP server
Jan 24 10:34:47 milan bluetoothd[986]: bluetoothd[986]: Starting SDP server
Jan 24 10:34:47 milan NetworkManager[1039]: <info> VPN: loaded org.freedesktop.NetworkManager.vpnc
Jan 24 10:34:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> VPN: loaded org.freedesktop.NetworkManager.vpnc
Jan 24 10:34:47 milan NetworkManager[1039]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
Jan 24 10:34:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
Jan 24 10:34:47 milan NetworkManager[1039]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
Jan 24 10:34:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
Jan 24 10:34:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> VPN: loaded org.freedesktop.NetworkManager.openconnect
Jan 24 10:34:48 milan bluetoothd[986]: bluetoothd[986]: Parsing /etc/bluetooth/input.conf failed: No such file or directory
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Jan 24 10:34:48 milan kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000158000000 (usable)
Jan 24 10:34:48 milan kernel: [ 0.000000] NX (Execute Disable) protection: active
Jan 24 10:34:48 milan kernel: [ 0.000000] DMI 2.6 present.
Jan 24 10:34:48 milan kernel: [ 0.000000] No AGP bridge found
Jan 24 10:34:48 milan kernel: [ 0.000000] last_pfn = 0x158000 max_arch_pfn = 0x400000000
Jan 24 10:34:48 milan kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jan 24 10:34:48 milan kernel: [ 0.000000] last_pfn = 0x9b800 max_arch_pfn = 0x400000000
Jan 24 10:34:48 milan kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000009b800000
Jan 24 10:34:48 milan kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000158000000
Jan 24 10:34:48 milan kernel: [ 0.000000] RAMDISK: 35e40000 - 36f18000
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: XSDT 000000009b7fe120 0008C (v01 HPQOEM SLIC-MPC 00000001 01000013)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: DSDT 000000009b7e9000 0F812 (v02 HP SLIC-MPC 00000001 MSFT 01000013)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: FACS 000000009b75f000 00040
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HP SLIC-MPC 00000001 MSFT 01000013)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HP SLIC-MPC 00000001 MSFT 01000013)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HP SLIC-MPC 00000001 MSFT 01000013)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: SSDT 000000009b7e6000 01152 (v01 TrmRef PtidDevc 00001000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: SSDT 000000009b7e5000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: BOOT 000000009b7e4000 00028 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: SSDT 000000009b7e3000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: SSDT 000000009b7e2000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: ASPT 000000009b7e1000 00034 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.000000] No NUMA configuration found
Jan 24 10:34:48 milan kernel: [ 0.000000] Faking a node at 0000000000000000-0000000158000000
Jan 24 10:34:48 milan kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000158000000
Jan 24 10:34:48 milan kernel: [ 0.000000] NODE_DATA [0000000157fec000 - 0000000157ffffff]
Jan 24 10:34:48 milan kernel: [ 0.000000] Zone PFN ranges:
Jan 24 10:34:48 milan kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Jan 24 10:34:48 milan kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
Jan 24 10:34:48 milan kernel: [ 0.000000] Normal 0x00100000 -> 0x00158000
Jan 24 10:34:48 milan kernel: [ 0.000000] Movable zone start PFN for each node
Jan 24 10:34:48 milan kernel: [ 0.000000] early_node_map[4] active PFN ranges
Jan 24 10:34:48 milan kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009d
Jan 24 10:34:48 milan kernel: [ 0.000000] 0: 0x00000100 -> 0x0009b63f
Jan 24 10:34:48 milan kernel: [ 0.000000] 0: 0x0009b7ff -> 0x0009b800
Jan 24 10:34:48 milan kernel: [ 0.000000] 0: 0x00100000 -> 0x00158000
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jan 24 10:34:48 milan kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 24 10:34:48 milan kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Jan 24 10:34:48 milan kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jan 24 10:34:48 milan kernel: [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 000000009b63f000 - 000000009b6bf000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 000000009b6bf000 - 000000009b7bf000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 000000009b7bf000 - 000000009b7ff000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 000000009b800000 - 00000000a0000000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
Jan 24 10:34:48 milan kernel: [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Jan 24 10:34:48 milan kernel: [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
Jan 24 10:34:48 milan kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Jan 24 10:34:48 milan kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
Jan 24 10:34:48 milan kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880157c00000 s81536 r8192 d20864 u262144
Jan 24 10:34:48 milan kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 974792
Jan 24 10:34:48 milan kernel: [ 0.000000] Policy zone: Normal
Jan 24 10:34:48 milan kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.9-1.fc16.x86_64 root=UUID=2949b379-bd76-4ed6-a2be-12a1bc4634c5 ro acpi_osi=Linux acpi_backlight=vendor rd.md=0 rd.lvm=0 rd.dm=0 quiet LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 KEYTABLE=fr
Jan 24 10:34:48 milan kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Jan 24 10:34:48 milan kernel: [ 0.000000] Checking aperture...
Jan 24 10:34:48 milan kernel: [ 0.000000] No AGP bridge found
Jan 24 10:34:48 milan kernel: [ 0.000000] Memory: 3825132k/5636096k available (6024k kernel code, 1648844k absent, 162120k reserved, 5657k data, 964k init)
Jan 24 10:34:48 milan kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Jan 24 10:34:48 milan kernel: [ 0.000000] Hierarchical RCU implementation.
Jan 24 10:34:48 milan kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Jan 24 10:34:48 milan kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
Jan 24 10:34:48 milan kernel: [ 0.000000] Extended CMOS year: 2000
Jan 24 10:34:48 milan kernel: [ 0.000000] Console: colour VGA+ 80x25
Jan 24 10:34:48 milan kernel: [ 0.000000] console [tty0] enabled
Jan 24 10:34:48 milan kernel: [ 0.000000] allocated 32505856 bytes of page_cgroup
Jan 24 10:34:48 milan kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jan 24 10:34:48 milan kernel: [ 0.000000] Fast TSC calibration using PIT
Jan 24 10:34:48 milan kernel: [ 0.001000] Detected 2394.032 MHz processor.
Jan 24 10:34:48 milan kernel: [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.06 BogoMIPS (lpj=2394032)
Jan 24 10:34:48 milan kernel: [ 0.000007] pid_max: default: 32768 minimum: 301
Jan 24 10:34:48 milan kernel: [ 0.000028] Security Framework initialized
Jan 24 10:34:48 milan kernel: [ 0.000038] SELinux: Initializing.
Jan 24 10:34:48 milan kernel: [ 0.000422] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jan 24 10:34:48 milan kernel: [ 0.001504] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jan 24 10:34:48 milan kernel: [ 0.001976] Mount-cache hash table entries: 256
Jan 24 10:34:48 milan kernel: [ 0.002109] Initializing cgroup subsys cpuacct
Jan 24 10:34:48 milan kernel: [ 0.002114] Initializing cgroup subsys memory
Jan 24 10:34:48 milan kernel: [ 0.002124] Initializing cgroup subsys devices
Jan 24 10:34:48 milan kernel: [ 0.002126] Initializing cgroup subsys freezer
Jan 24 10:34:48 milan kernel: [ 0.002127] Initializing cgroup subsys net_cls
Jan 24 10:34:48 milan kernel: [ 0.002129] Initializing cgroup subsys blkio
Jan 24 10:34:48 milan kernel: [ 0.002135] Initializing cgroup subsys perf_event
Jan 24 10:34:48 milan kernel: [ 0.002160] CPU: Physical Processor ID: 0
Jan 24 10:34:48 milan kernel: [ 0.002161] CPU: Processor Core ID: 0
Jan 24 10:34:48 milan kernel: [ 0.002166] mce: CPU supports 9 MCE banks
Jan 24 10:34:48 milan kernel: [ 0.002183] using mwait in idle threads.
Jan 24 10:34:48 milan kernel: [ 0.003306] ACPI: Core revision 20110623
Jan 24 10:34:48 milan kernel: [ 0.029570] ftrace: allocating 22701 entries in 90 pages
Jan 24 10:34:48 milan kernel: [ 0.036372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Jan 24 10:34:48 milan kernel: [ 0.046358] CPU0: Intel(R) Core(TM) i5 CPU M 450 @ 2.40GHz stepping 05
Jan 24 10:34:48 milan kernel: [ 0.147264] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
Jan 24 10:34:48 milan kernel: [ 0.147270] ... version: 3
Jan 24 10:34:48 milan kernel: [ 0.147271] ... bit width: 48
Jan 24 10:34:48 milan kernel: [ 0.147272] ... generic registers: 4
Jan 24 10:34:48 milan kernel: [ 0.147273] ... value mask: 0000ffffffffffff
Jan 24 10:34:48 milan kernel: [ 0.147275] ... max period: 000000007fffffff
Jan 24 10:34:48 milan kernel: [ 0.147276] ... fixed-purpose events: 3
Jan 24 10:34:48 milan kernel: [ 0.147277] ... event mask: 000000070000000f
Jan 24 10:34:48 milan kernel: [ 0.147771] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:34:48 milan kernel: [ 0.147853] Booting Node 0, Processors #1
Jan 24 10:34:48 milan kernel: [ 0.238233] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:34:48 milan kernel: [ 0.238348] #2
Jan 24 10:34:48 milan kernel: [ 0.329063] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:34:48 milan kernel: [ 0.329162] #3
Jan 24 10:34:48 milan kernel: [ 0.418863] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:34:48 milan kernel: [ 0.418906] Brought up 4 CPUs
Jan 24 10:34:48 milan kernel: [ 0.418908] Total of 4 processors activated (19151.29 BogoMIPS).
Jan 24 10:34:48 milan kernel: [ 0.421071] devtmpfs: initialized
Jan 24 10:34:48 milan kernel: [ 0.421899] PM: Registering ACPI NVS region at 9b6bf000 (1048576 bytes)
Jan 24 10:34:48 milan kernel: [ 0.422574] atomic64 test passed for x86-64 platform with CX8 and with SSE
Jan 24 10:34:48 milan kernel: [ 0.422605] RTC time: 10:34:19, date: 01/24/12
Jan 24 10:34:48 milan kernel: [ 0.422635] NET: Registered protocol family 16
Jan 24 10:34:48 milan kernel: [ 0.422777] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Jan 24 10:34:48 milan kernel: [ 0.422779] ACPI: bus type pci registered
Jan 24 10:34:48 milan kernel: [ 0.422851] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Jan 24 10:34:48 milan kernel: [ 0.422854] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Jan 24 10:34:48 milan kernel: [ 0.453938] PCI: Using configuration type 1 for base access
Jan 24 10:34:48 milan kernel: [ 0.454659] bio: create slab <bio-0> at 0
Jan 24 10:34:48 milan kernel: [ 0.454730] ACPI: Added _OSI(Module Device)
Jan 24 10:34:48 milan kernel: [ 0.454732] ACPI: Added _OSI(Processor Device)
Jan 24 10:34:48 milan kernel: [ 0.454733] ACPI: Added _OSI(3.0 _SCP Extensions)
Jan 24 10:34:48 milan kernel: [ 0.454735] ACPI: Added _OSI(Processor Aggregator Device)
Jan 24 10:34:48 milan kernel: [ 0.454736] ACPI: Added _OSI(Linux)
Jan 24 10:34:48 milan kernel: [ 0.458142] ACPI: Executed 1 blocks of module-level executable AML code
Jan 24 10:34:48 milan kernel: [ 0.466753] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
Jan 24 10:34:48 milan kernel: [ 0.471954] ACPI: SSDT 000000009b691a18 00484 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.472368] ACPI: Dynamic OEM Table Load:
Jan 24 10:34:48 milan kernel: [ 0.472370] ACPI: SSDT (null) 00484 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.472531] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.472934] ACPI: Dynamic OEM Table Load:
Jan 24 10:34:48 milan kernel: [ 0.472936] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.478987] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.479441] ACPI: Dynamic OEM Table Load:
Jan 24 10:34:48 milan kernel: [ 0.479443] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.481858] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.482279] ACPI: Dynamic OEM Table Load:
Jan 24 10:34:48 milan kernel: [ 0.482281] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
Jan 24 10:34:48 milan kernel: [ 0.487932] ACPI: EC: GPE storm detected, transactions will use polling mode
Jan 24 10:34:48 milan kernel: [ 0.945058] ACPI: Interpreter enabled
Jan 24 10:34:48 milan kernel: [ 0.945062] ACPI: (supports S0 S3 S4 S5)
Jan 24 10:34:48 milan kernel: [ 0.945097] ACPI: Using IOAPIC for interrupt routing
Jan 24 10:34:48 milan kernel: [ 0.945752] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
Jan 24 10:34:48 milan kernel: [ 0.961535] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
Jan 24 10:34:48 milan kernel: [ 0.962958] ACPI: Power Resource [FN00] (on)
Jan 24 10:34:48 milan kernel: [ 0.963339] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Jan 24 10:34:48 milan kernel: [ 0.963532] ACPI: No dock devices found.
Jan 24 10:34:48 milan kernel: [ 0.963533] HEST: Table not found.
Jan 24 10:34:48 milan kernel: [ 0.963536] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Jan 24 10:34:48 milan kernel: [ 0.963845] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
Jan 24 10:34:48 milan kernel: [ 0.964353] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
Jan 24 10:34:48 milan kernel: [ 0.964355] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
Jan 24 10:34:48 milan kernel: [ 0.964357] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
Jan 24 10:34:48 milan kernel: [ 0.964360] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff]
Jan 24 10:34:48 milan kernel: [ 0.964388] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
Jan 24 10:34:48 milan kernel: [ 0.970894] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
Jan 24 10:34:48 milan kernel: [ 0.972919] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
Jan 24 10:34:48 milan kernel: [ 0.972986] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
Jan 24 10:34:48 milan kernel: [ 0.973319] pci0000:00: Requesting ACPI _OSC control (0x1d)
Jan 24 10:34:48 milan kernel: [ 0.973350] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
Jan 24 10:34:48 milan kernel: [ 0.973352] ACPI _OSC control for PCIe not granted, disabling ASPM
Jan 24 10:34:48 milan kernel: [ 0.977457] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
Jan 24 10:34:48 milan kernel: [ 0.977619] pci0000:ff: Requesting ACPI _OSC control (0x1d)
Jan 24 10:34:48 milan kernel: [ 0.977621] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
Jan 24 10:34:48 milan kernel: [ 0.977622] ACPI _OSC control for PCIe not granted, disabling ASPM
Jan 24 10:34:48 milan kernel: [ 0.977788] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
Jan 24 10:34:48 milan kernel: [ 0.977828] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Jan 24 10:34:48 milan kernel: [ 0.977868] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Jan 24 10:34:48 milan kernel: [ 0.977907] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
Jan 24 10:34:48 milan kernel: [ 0.977943] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Jan 24 10:34:48 milan kernel: [ 0.977980] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Jan 24 10:34:48 milan kernel: [ 0.978018] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Jan 24 10:34:48 milan kernel: [ 0.978054] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Jan 24 10:34:48 milan kernel: [ 0.978152] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Jan 24 10:34:48 milan kernel: [ 0.978159] vgaarb: loaded
Jan 24 10:34:48 milan kernel: [ 0.978160] vgaarb: bridge control possible 0000:00:02.0
Jan 24 10:34:48 milan kernel: [ 0.978226] SCSI subsystem initialized
Jan 24 10:34:48 milan kernel: [ 0.978335] usbcore: registered new interface driver usbfs
Jan 24 10:34:48 milan kernel: [ 0.978346] usbcore: registered new interface driver hub
Jan 24 10:34:48 milan kernel: [ 0.978367] usbcore: registered new device driver usb
Jan 24 10:34:48 milan kernel: [ 0.978416] PCI: Using ACPI for IRQ routing
Jan 24 10:34:48 milan kernel: [ 0.986696] NetLabel: Initializing
Jan 24 10:34:48 milan kernel: [ 0.986698] NetLabel: domain hash size = 128
Jan 24 10:34:48 milan kernel: [ 0.986699] NetLabel: protocols = UNLABELED CIPSOv4
Jan 24 10:34:48 milan kernel: [ 0.986708] NetLabel: unlabeled traffic allowed by default
Jan 24 10:34:48 milan kernel: [ 0.986717] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Jan 24 10:34:48 milan kernel: [ 0.986721] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Jan 24 10:34:48 milan kernel: [ 0.988735] Switching to clocksource hpet
Jan 24 10:34:48 milan kernel: [ 0.988772] Switched to NOHz mode on CPU #0
Jan 24 10:34:48 milan kernel: [ 0.988846] Switched to NOHz mode on CPU #3
Jan 24 10:34:48 milan kernel: [ 0.988880] Switched to NOHz mode on CPU #2
Jan 24 10:34:48 milan kernel: [ 0.988889] Switched to NOHz mode on CPU #1
Jan 24 10:34:48 milan kernel: [ 0.994284] pnp: PnP ACPI init
Jan 24 10:34:48 milan kernel: [ 0.994300] ACPI: bus type pnp registered
Jan 24 10:34:48 milan kernel: [ 0.995030] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff]
Jan 24 10:34:48 milan kernel: [ 0.995068] system 00:05: [io 0x0680-0x069f] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995070] system 00:05: [io 0x0800-0x080f] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995072] system 00:05: [io 0x0810-0x0813] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995074] system 00:05: [io 0xffff] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995076] system 00:05: [io 0x0400-0x047f] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995078] system 00:05: [io 0x0500-0x0501] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995079] system 00:05: [io 0x0700-0x077f] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995521] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995523] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995525] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995527] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995529] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995531] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995532] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995534] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
Jan 24 10:34:48 milan kernel: [ 0.995537] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
Jan 24 10:34:48 milan kernel: [ 0.995538] system 00:0a: [mem 0xb4500000-0xb4500fff] has been reserved
Jan 24 10:34:48 milan kernel: [ 0.995785] pnp: PnP ACPI: found 12 devices
Jan 24 10:34:48 milan kernel: [ 0.995787] ACPI: ACPI bus type pnp unregistered
Jan 24 10:34:48 milan kernel: [ 1.002707] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
Jan 24 10:34:48 milan kernel: [ 1.002711] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
Jan 24 10:34:48 milan kernel: [ 1.002715] pci 0000:00:1c.0: bridge window [mem 0xb3400000-0xb43fffff]
Jan 24 10:34:48 milan kernel: [ 1.002719] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
Jan 24 10:34:48 milan kernel: [ 1.002725] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
Jan 24 10:34:48 milan kernel: [ 1.002727] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
Jan 24 10:34:48 milan kernel: [ 1.002731] pci 0000:00:1c.1: bridge window [mem 0xb2400000-0xb33fffff]
Jan 24 10:34:48 milan kernel: [ 1.002735] pci 0000:00:1c.1: bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
Jan 24 10:34:48 milan kernel: [ 1.002741] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
Jan 24 10:34:48 milan kernel: [ 1.002763] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jan 24 10:34:48 milan kernel: [ 1.002776] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Jan 24 10:34:48 milan kernel: [ 1.002845] NET: Registered protocol family 2
Jan 24 10:34:48 milan kernel: [ 1.002961] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jan 24 10:34:48 milan kernel: [ 1.003787] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Jan 24 10:34:48 milan kernel: [ 1.005648] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 24 10:34:48 milan kernel: [ 1.005889] TCP: Hash tables configured (established 524288 bind 65536)
Jan 24 10:34:48 milan kernel: [ 1.005891] TCP reno registered
Jan 24 10:34:48 milan kernel: [ 1.005902] UDP hash table entries: 2048 (order: 4, 65536 bytes)
Jan 24 10:34:48 milan kernel: [ 1.005922] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Jan 24 10:34:48 milan kernel: [ 1.006018] NET: Registered protocol family 1
Jan 24 10:34:48 milan kernel: [ 1.027950] Unpacking initramfs...
Jan 24 10:34:48 milan kernel: [ 1.321976] Freeing initrd memory: 17248k freed
Jan 24 10:34:48 milan kernel: [ 1.325832] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Jan 24 10:34:48 milan kernel: [ 1.325837] Placing 64MB software IO TLB between ffff880097638000 - ffff88009b638000
Jan 24 10:34:48 milan kernel: [ 1.325839] software IO TLB at phys 0x97638000 - 0x9b638000
Jan 24 10:34:48 milan kernel: [ 1.325858] Simple Boot Flag at 0x44 set to 0x1
Jan 24 10:34:48 milan kernel: [ 1.326459] Intel AES-NI instructions are not detected.
Jan 24 10:34:48 milan kernel: [ 1.326575] audit: initializing netlink socket (disabled)
Jan 24 10:34:48 milan kernel: [ 1.326588] type=2000 audit(1327401260.150:1): initialized
Jan 24 10:34:48 milan kernel: [ 1.351879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jan 24 10:34:48 milan kernel: [ 1.369891] VFS: Disk quotas dquot_6.5.2
Jan 24 10:34:48 milan kernel: [ 1.369944] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 24 10:34:48 milan kernel: [ 1.370384] msgmni has been set to 7504
Jan 24 10:34:48 milan kernel: [ 1.370759] alg: No test for stdrng (krng)
Jan 24 10:34:48 milan kernel: [ 1.370771] NET: Registered protocol family 38
Jan 24 10:34:48 milan kernel: [ 1.370816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jan 24 10:34:48 milan kernel: [ 1.370844] io scheduler noop registered
Jan 24 10:34:48 milan kernel: [ 1.370846] io scheduler deadline registered
Jan 24 10:34:48 milan kernel: [ 1.370882] io scheduler cfq registered (default)
Jan 24 10:34:48 milan kernel: [ 1.371060] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 24 10:34:48 milan kernel: [ 1.371076] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jan 24 10:34:48 milan kernel: [ 1.371078] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jan 24 10:34:48 milan kernel: [ 1.379321] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Jan 24 10:34:48 milan kernel: [ 1.379403] ACPI: AC Adapter [AC] (on-line)
Jan 24 10:34:48 milan kernel: [ 1.379573] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
Jan 24 10:34:48 milan kernel: [ 1.379592] ACPI: Lid Switch [LID0]
Jan 24 10:34:48 milan kernel: [ 1.379621] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Jan 24 10:34:48 milan kernel: [ 1.379625] ACPI: Power Button [PWRB]
Jan 24 10:34:48 milan kernel: [ 1.379653] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Jan 24 10:34:48 milan kernel: [ 1.379655] ACPI: Power Button [PWRF]
Jan 24 10:34:48 milan kernel: [ 1.379698] ACPI: Fan [FAN0] (on)
Jan 24 10:34:48 milan kernel: [ 1.414192] thermal LNXTHERM:00: registered as thermal_zone0
Jan 24 10:34:48 milan kernel: [ 1.414197] ACPI: Thermal Zone [TZ00] (49 C)
Jan 24 10:34:48 milan kernel: [ 1.422169] thermal LNXTHERM:01: registered as thermal_zone1
Jan 24 10:34:48 milan kernel: [ 1.422173] ACPI: Thermal Zone [TZ01] (32 C)
Jan 24 10:34:48 milan kernel: [ 1.430155] thermal LNXTHERM:02: registered as thermal_zone2
Jan 24 10:34:48 milan kernel: [ 1.430159] ACPI: Thermal Zone [TZ02] (0 C)
Jan 24 10:34:48 milan kernel: [ 1.430207] ERST: Table is not found!
Jan 24 10:34:48 milan kernel: [ 1.430210] GHES: HEST is not enabled!
Jan 24 10:34:48 milan kernel: [ 1.430297] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jan 24 10:34:48 milan kernel: [ 1.472348] Non-volatile memory driver v1.3
Jan 24 10:34:48 milan kernel: [ 1.472350] Linux agpgart interface v0.103
Jan 24 10:34:48 milan kernel: [ 1.472407] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
Jan 24 10:34:48 milan kernel: [ 1.472497] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
Jan 24 10:34:48 milan kernel: [ 1.473262] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
Jan 24 10:34:48 milan kernel: [ 1.473426] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
Jan 24 10:34:48 milan kernel: [ 1.474144] loop: module loaded
Jan 24 10:34:48 milan kernel: [ 1.474256] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jan 24 10:34:48 milan kernel: [ 1.474361] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
Jan 24 10:34:48 milan kernel: [ 1.474364] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
Jan 24 10:34:48 milan kernel: [ 1.478374] scsi0 : ahci
Jan 24 10:34:48 milan kernel: [ 1.478453] scsi1 : ahci
Jan 24 10:34:48 milan kernel: [ 1.478507] scsi2 : ahci
Jan 24 10:34:48 milan kernel: [ 1.478561] scsi3 : ahci
Jan 24 10:34:48 milan kernel: [ 1.478616] scsi4 : ahci
Jan 24 10:34:48 milan kernel: [ 1.478715] ata1: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405100 irq 40
Jan 24 10:34:48 milan kernel: [ 1.478718] ata2: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405180 irq 40
Jan 24 10:34:48 milan kernel: [ 1.478719] ata3: DUMMY
Jan 24 10:34:48 milan kernel: [ 1.478720] ata4: DUMMY
Jan 24 10:34:48 milan kernel: [ 1.478722] ata5: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405300 irq 40
Jan 24 10:34:48 milan kernel: [ 1.478783] Fixed MDIO Bus: probed
Jan 24 10:34:48 milan kernel: [ 1.478851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 24 10:34:48 milan kernel: [ 1.478866] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 24 10:34:48 milan kernel: [ 1.478885] ehci_hcd 0000:00:1a.0: EHCI Host Controller
Jan 24 10:34:48 milan kernel: [ 1.478963] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Jan 24 10:34:48 milan kernel: [ 1.478990] ehci_hcd 0000:00:1a.0: debug port 2
Jan 24 10:34:48 milan kernel: [ 1.482936] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb4405c00
Jan 24 10:34:48 milan kernel: [ 1.492019] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Jan 24 10:34:48 milan kernel: [ 1.492054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan 24 10:34:48 milan kernel: [ 1.492058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 24 10:34:48 milan kernel: [ 1.492062] usb usb1: Product: EHCI Host Controller
Jan 24 10:34:48 milan kernel: [ 1.492065] usb usb1: Manufacturer: Linux 3.1.9-1.fc16.x86_64 ehci_hcd
Jan 24 10:34:48 milan kernel: [ 1.492068] usb usb1: SerialNumber: 0000:00:1a.0
Jan 24 10:34:48 milan kernel: [ 1.492188] hub 1-0:1.0: USB hub found
Jan 24 10:34:48 milan kernel: [ 1.492192] hub 1-0:1.0: 3 ports detected
Jan 24 10:34:48 milan kernel: [ 1.492258] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jan 24 10:34:48 milan kernel: [ 1.492273] ehci_hcd 0000:00:1d.0: EHCI Host Controller
Jan 24 10:34:48 milan kernel: [ 1.492322] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Jan 24 10:34:48 milan kernel: [ 1.492346] ehci_hcd 0000:00:1d.0: debug port 2
Jan 24 10:34:48 milan kernel: [ 1.496274] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xb4405800
Jan 24 10:34:48 milan kernel: [ 1.505994] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Jan 24 10:34:48 milan kernel: [ 1.506021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Jan 24 10:34:48 milan kernel: [ 1.506025] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 24 10:34:48 milan kernel: [ 1.506029] usb usb2: Product: EHCI Host Controller
Jan 24 10:34:48 milan kernel: [ 1.506032] usb usb2: Manufacturer: Linux 3.1.9-1.fc16.x86_64 ehci_hcd
Jan 24 10:34:48 milan kernel: [ 1.506035] usb usb2: SerialNumber: 0000:00:1d.0
Jan 24 10:34:48 milan kernel: [ 1.506145] hub 2-0:1.0: USB hub found
Jan 24 10:34:48 milan kernel: [ 1.506147] hub 2-0:1.0: 3 ports detected
Jan 24 10:34:48 milan kernel: [ 1.506195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 24 10:34:48 milan kernel: [ 1.506203] uhci_hcd: USB Universal Host Controller Interface driver
Jan 24 10:34:48 milan kernel: [ 1.506247] usbcore: registered new interface driver usbserial
Jan 24 10:34:48 milan kernel: [ 1.506253] USB Serial support registered for generic
Jan 24 10:34:48 milan kernel: [ 1.506260] usbcore: registered new interface driver usbserial_generic
Jan 24 10:34:48 milan kernel: [ 1.506262] usbserial: USB Serial Driver core
Jan 24 10:34:48 milan kernel: [ 1.506290] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jan 24 10:34:48 milan kernel: [ 1.510788] i8042: Detected active multiplexing controller, rev 1.1
Jan 24 10:34:48 milan kernel: [ 1.514335] serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 24 10:34:48 milan kernel: [ 1.514341] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Jan 24 10:34:48 milan kernel: [ 1.514362] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Jan 24 10:34:48 milan kernel: [ 1.514377] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Jan 24 10:34:48 milan kernel: [ 1.514393] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Jan 24 10:34:48 milan kernel: [ 1.514477] mousedev: PS/2 mouse device common for all mice
Jan 24 10:34:48 milan kernel: [ 1.514675] rtc_cmos 00:06: RTC can wake from S4
Jan 24 10:34:48 milan kernel: [ 1.514795] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Jan 24 10:34:48 milan kernel: [ 1.514823] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
Jan 24 10:34:48 milan kernel: [ 1.514904] device-mapper: uevent: version 1.0.3
Jan 24 10:34:48 milan kernel: [ 1.514992] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
Jan 24 10:34:48 milan kernel: [ 1.515135] cpuidle: using governor ladder
Jan 24 10:34:48 milan kernel: [ 1.515238] cpuidle: using governor menu
Jan 24 10:34:48 milan kernel: [ 1.515322] EFI Variables Facility v0.08 2004-May-17
Jan 24 10:34:48 milan kernel: [ 1.515409] usbcore: registered new interface driver usbhid
Jan 24 10:34:48 milan kernel: [ 1.515410] usbhid: USB HID core driver
Jan 24 10:34:48 milan kernel: [ 1.515464] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 24 10:34:48 milan kernel: [ 1.515478] TCP cubic registered
Jan 24 10:34:48 milan kernel: [ 1.515479] Initializing XFRM netlink socket
Jan 24 10:34:48 milan kernel: [ 1.515581] NET: Registered protocol family 10
Jan 24 10:34:48 milan kernel: [ 1.515745] Mobile IPv6
Jan 24 10:34:48 milan kernel: [ 1.515748] NET: Registered protocol family 17
Jan 24 10:34:48 milan kernel: [ 1.515759] Registering the dns_resolver key type
Jan 24 10:34:48 milan kernel: [ 1.515903] registered taskstats version 1
Jan 24 10:34:48 milan kernel: [ 1.524953] IMA: No TPM chip found, activating TPM-bypass!
Jan 24 10:34:48 milan kernel: [ 1.525469] Magic number: 12:859:578
Jan 24 10:34:48 milan kernel: [ 1.525508] platform pcspkr: hash matches
Jan 24 10:34:48 milan kernel: [ 1.525676] rtc_cmos 00:06: setting system clock to 2012-01-24 10:34:21 UTC (1327401261)
Jan 24 10:34:48 milan kernel: [ 1.531103] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:34:48 milan kernel: [ 1.531116] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.531129] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.544191] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:34:48 milan kernel: [ 1.544203] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.544214] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.544222] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880150d998c0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.551872] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Jan 24 10:34:48 milan kernel: [ 1.577084] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:34:48 milan kernel: [ 1.577098] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.577111] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.577121] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880150d99b18), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.644129] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:34:48 milan kernel: [ 1.644140] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.644153] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.644163] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880150d99a78), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:34:48 milan kernel: [ 1.644286] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Jan 24 10:34:48 milan kernel: [ 1.644296] ACPI: Battery Slot [BAT0] (battery present)
Jan 24 10:34:48 milan kernel: [ 1.644366] Initializing network drop monitor service
Jan 24 10:34:48 milan kernel: [ 1.784587] ata5: SATA link down (SStatus 0 SControl 300)
Jan 24 10:34:48 milan kernel: [ 1.784624] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 24 10:34:48 milan kernel: [ 1.784650] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 10:34:48 milan kernel: [ 1.785633] ata1.00: ATA-8: TOSHIBA MK5056GSY, LH003C, max UDMA/100
Jan 24 10:34:48 milan kernel: [ 1.785638] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Jan 24 10:34:48 milan kernel: [ 1.786766] ata1.00: configured for UDMA/100
Jan 24 10:34:48 milan kernel: [ 1.786954] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5056GS LH00 PQ: 0 ANSI: 5
Jan 24 10:34:48 milan kernel: [ 1.787176] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Jan 24 10:34:48 milan kernel: [ 1.787232] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 24 10:34:48 milan kernel: [ 1.787280] sd 0:0:0:0: [sda] Write Protect is off
Jan 24 10:34:48 milan kernel: [ 1.787328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 24 10:34:48 milan kernel: [ 1.793541] usb 1-1: new high speed USB device number 2 using ehci_hcd
Jan 24 10:34:48 milan kernel: [ 1.798762] ata2.00: ATAPI: hp CDDVDW TS-U633F, HH05, max UDMA/100
Jan 24 10:34:48 milan kernel: [ 1.814413] ata2.00: configured for UDMA/100
Jan 24 10:34:48 milan kernel: [ 1.818557] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-U633F HH05 PQ: 0 ANSI: 5
Jan 24 10:34:48 milan kernel: [ 1.825473] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jan 24 10:34:48 milan kernel: [ 1.825480] cdrom: Uniform CD-ROM driver Revision: 3.20
Jan 24 10:34:48 milan kernel: [ 1.825804] sr 1:0:0:0: Attached scsi generic sg1 type 5
Jan 24 10:34:48 milan kernel: [ 1.901920] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
Jan 24 10:34:48 milan kernel: [ 1.903036] sd 0:0:0:0: [sda] Attached SCSI disk
Jan 24 10:34:48 milan kernel: [ 1.906130] Freeing unused kernel memory: 964k freed
Jan 24 10:34:48 milan kernel: [ 1.906343] Write protecting the kernel read-only data: 10240k
Jan 24 10:34:48 milan kernel: [ 1.907407] Freeing unused kernel memory: 100k freed
Jan 24 10:34:48 milan kernel: [ 1.907716] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
Jan 24 10:34:48 milan kernel: [ 1.907723] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 24 10:34:48 milan kernel: [ 1.908155] hub 1-1:1.0: USB hub found
Jan 24 10:34:48 milan kernel: [ 1.908343] hub 1-1:1.0: 6 ports detected
Jan 24 10:34:48 milan kernel: [ 1.917350] Freeing unused kernel memory: 1552k freed
Jan 24 10:34:48 milan kernel: [ 2.011152] usb 2-1: new high speed USB device number 2 using ehci_hcd
Jan 24 10:34:48 milan kernel: [ 2.085223] [drm] Initialized drm 1.1.0 20060810
Jan 24 10:34:48 milan kernel: [ 2.090150] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 24 10:34:48 milan kernel: [ 2.125325] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
Jan 24 10:34:48 milan kernel: [ 2.125328] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan 24 10:34:48 milan kernel: [ 2.125590] hub 2-1:1.0: USB hub found
Jan 24 10:34:48 milan kernel: [ 2.125674] hub 2-1:1.0: 8 ports detected
Jan 24 10:34:48 milan kernel: [ 2.131459] mtrr: no more MTRRs available
Jan 24 10:34:48 milan kernel: [ 2.131461] [drm] MTRR allocation failed. Graphics performance may suffer.
Jan 24 10:34:48 milan kernel: [ 2.131689] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Jan 24 10:34:48 milan kernel: [ 2.131690] [drm] Driver supports precise vblank timestamp query.
Jan 24 10:34:48 milan kernel: [ 2.131721] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Jan 24 10:34:48 milan kernel: [ 2.200976] usb 1-1.4: new full speed USB device number 3 using ehci_hcd
Jan 24 10:34:48 milan kernel: [ 2.287463] usb 1-1.4: New USB device found, idVendor=138a, idProduct=0005
Jan 24 10:34:48 milan kernel: [ 2.287469] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
Jan 24 10:34:48 milan kernel: [ 2.287474] usb 1-1.4: SerialNumber: 00b08095ca85
Jan 24 10:34:48 milan kernel: [ 2.325602] Refined TSC clocksource calibration: 2394.000 MHz.
Jan 24 10:34:48 milan kernel: [ 2.325610] Switching to clocksource tsc
Jan 24 10:34:48 milan kernel: [ 2.400764] usb 2-1.3: new full speed USB device number 3 using ehci_hcd
Jan 24 10:34:48 milan kernel: [ 2.453491] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
Jan 24 10:34:48 milan kernel: [ 2.489316] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
Jan 24 10:34:48 milan kernel: [ 2.489970] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=21b4
Jan 24 10:34:48 milan kernel: [ 2.489978] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 24 10:34:48 milan kernel: [ 2.489984] usb 2-1.3: Product: Broadcom 2070 Bluetooth
Jan 24 10:34:48 milan kernel: [ 2.489988] usb 2-1.3: Manufacturer: Broadcom Corp
Jan 24 10:34:48 milan kernel: [ 2.489992] usb 2-1.3: SerialNumber: 002713DDD4FC
Jan 24 10:34:48 milan kernel: [ 2.563345] usb 2-1.6: new full speed USB device number 4 using ehci_hcd
Jan 24 10:34:48 milan kernel: [ 2.683206] fbcon: inteldrmfb (fb0) is primary device
Jan 24 10:34:48 milan kernel: [ 2.684239] [drm:ironlake_update_pch_refclk] *ERROR* enabling SSC on PCH
Jan 24 10:34:48 milan kernel: [ 2.710134] usb 2-1.6: new high speed USB device number 5 using ehci_hcd
Jan 24 10:34:48 milan kernel: [ 2.817452] usb 2-1.6: New USB device found, idVendor=10f1, idProduct=1a28
Jan 24 10:34:48 milan kernel: [ 2.817458] usb 2-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
Jan 24 10:34:48 milan kernel: [ 2.817462] usb 2-1.6: Product: HP Webcam
Jan 24 10:34:48 milan kernel: [ 2.817464] usb 2-1.6: Manufacturer: Importek
Jan 24 10:34:48 milan kernel: [ 3.007752] Console: switching to colour frame buffer device 170x48
Jan 24 10:34:48 milan kernel: [ 3.013008] fb0: inteldrmfb frame buffer device
Jan 24 10:34:48 milan kernel: [ 3.013010] drm: registered panic notifier
Jan 24 10:34:48 milan kernel: [ 3.015131] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
Jan 24 10:34:48 milan kernel: [ 3.015293] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Jan 24 10:34:48 milan kernel: [ 3.015818] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Jan 24 10:34:48 milan kernel: [ 3.314524] wmi: Mapper loaded
Jan 24 10:34:48 milan kernel: [ 3.771381] Btrfs loaded
Jan 24 10:34:48 milan kernel: [ 3.993194] device label home devid 1 transid 16129 /dev/sda6
Jan 24 10:34:48 milan kernel: [ 3.993605] device fsid be8d8291-3821-4584-a9a7-776b91d4d5a5 devid 1 transid 59746 /dev/sda5
Jan 24 10:34:48 milan kernel: [ 4.082184] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Jan 24 10:34:48 milan kernel: [ 4.256920] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Jan 24 10:34:48 milan kernel: [ 4.961288] type=1404 audit(1327401264.940:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
Jan 24 10:34:48 milan kernel: [ 5.189408] type=1403 audit(1327401265.168:3): policy loaded auid=4294967295 ses=4294967295
Jan 24 10:34:48 milan kernel: [ 11.829639] EXT4-fs (sda7): re-mounted. Opts: (null)
Jan 24 10:34:48 milan kernel: [ 20.687653] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
Jan 24 10:34:48 milan kernel: [ 20.689460] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
Jan 24 10:34:48 milan kernel: [ 20.689473] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x3
Jan 24 10:34:48 milan kernel: [ 20.690657] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
Jan 24 10:34:48 milan kernel: [ 20.692141] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
Jan 24 10:34:48 milan kernel: [ 20.692151] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x3
Jan 24 10:34:48 milan kernel: [ 20.693694] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Jan 24 10:34:48 milan kernel: [ 21.673125] bcma-pci-bridge 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jan 24 10:34:48 milan kernel: [ 21.673229] Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
Jan 24 10:34:48 milan kernel: [ 21.673253] Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
Jan 24 10:34:48 milan kernel: [ 21.673304] Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
Jan 24 10:34:48 milan kernel: [ 21.683297] Bus registered
Jan 24 10:34:48 milan kernel: [ 21.859329] Bluetooth: Core ver 2.16
Jan 24 10:34:48 milan kernel: [ 21.859549] NET: Registered protocol family 31
Jan 24 10:34:48 milan kernel: [ 21.859552] Bluetooth: HCI device and connection manager initialized
Jan 24 10:34:48 milan kernel: [ 21.859556] Bluetooth: HCI socket layer initialized
Jan 24 10:34:48 milan kernel: [ 21.859558] Bluetooth: L2CAP socket layer initialized
Jan 24 10:34:48 milan kernel: [ 21.859567] Bluetooth: SCO socket layer initialized
Jan 24 10:34:48 milan kernel: [ 21.862618] usbcore: registered new interface driver btusb
Jan 24 10:34:48 milan kernel: [ 21.874318] cfg80211: Calling CRDA to update world regulatory domain
Jan 24 10:34:48 milan kernel: [ 21.879196] cfg80211: World regulatory domain updated:
Jan 24 10:34:48 milan kernel: [ 21.879199] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:34:48 milan kernel: [ 21.879202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 21.879204] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 21.879206] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 21.879207] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 21.879209] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 21.899072] vboxdrv: fAsync=0 offMin=0xf0 offMax=0x12ae
Jan 24 10:34:48 milan kernel: [ 21.899130] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Jan 24 10:34:48 milan kernel: [ 21.963497] iTCO_vendor_support: vendor-support=0
Jan 24 10:34:48 milan kernel: [ 22.233542] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
Jan 24 10:34:48 milan kernel: [ 22.233575] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Jan 24 10:34:48 milan kernel: [ 22.233767] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
Jan 24 10:34:48 milan kernel: [ 22.289261] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Jan 24 10:34:48 milan kernel: [ 22.289288] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 24 10:34:48 milan kernel: [ 22.289567] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc9000061c000, 1c:c1:de:a6:00:2d, XID 083000c0 IRQ 42
Jan 24 10:34:48 milan kernel: [ 22.297256] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
Jan 24 10:34:48 milan kernel: [ 22.297357] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
Jan 24 10:34:48 milan kernel: [ 22.297700] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jan 24 10:34:48 milan kernel: [ 22.312777] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jan 24 10:34:48 milan kernel: [ 22.332214] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
Jan 24 10:34:48 milan kernel: [ 22.339507] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
Jan 24 10:34:48 milan kernel: [ 22.339694] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Jan 24 10:34:48 milan kernel: [ 22.339913] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Jan 24 10:34:48 milan kernel: [ 22.340182] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Jan 24 10:34:48 milan kernel: [ 22.372392] hp_accel: laptop model unknown, using default axes configuration
Jan 24 10:34:48 milan kernel: [ 22.372994] lis3lv02d: 8 bits sensor found
Jan 24 10:34:48 milan kernel: [ 22.375036] Linux media interface: v0.10
Jan 24 10:34:48 milan kernel: [ 22.376481] Linux video capture interface: v2.00
Jan 24 10:34:48 milan kernel: [ 22.376970] uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a28)
Jan 24 10:34:48 milan kernel: [ 22.385407] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input9
Jan 24 10:34:48 milan kernel: [ 22.385588] usbcore: registered new interface driver uvcvideo
Jan 24 10:34:48 milan kernel: [ 22.385592] USB Video Class driver (1.1.1)
Jan 24 10:34:48 milan kernel: [ 22.409085] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
Jan 24 10:34:48 milan kernel: [ 22.409726] hp_accel: driver loaded
Jan 24 10:34:48 milan kernel: [ 22.715585] input: HP WMI hotkeys as /devices/virtual/input/input11
Jan 24 10:34:48 milan kernel: [ 22.949921] Adding 4610616k swap on /dev/sda8. Priority:0 extents:1 across:4610616k
Jan 24 10:34:48 milan kernel: [ 22.978895] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
Jan 24 10:34:48 milan kernel: [ 22.996670] brcms_module_init: register returned 0
Jan 24 10:34:48 milan kernel: [ 22.999940] cfg80211: Calling CRDA for country: US
Jan 24 10:34:48 milan kernel: [ 23.003294] Broadcom 43xx driver loaded [ Features: PMNLS ]
Jan 24 10:34:48 milan kernel: [ 23.004410] cfg80211: Regulatory domain changed to country: US
Jan 24 10:34:48 milan kernel: [ 23.004414] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:34:48 milan kernel: [ 23.004417] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 24 10:34:48 milan kernel: [ 23.004420] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 24 10:34:48 milan kernel: [ 23.004423] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 23.004426] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 23.004428] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 23.004430] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 24 10:34:48 milan kernel: [ 23.013884] cfg80211: Calling CRDA for country: FR
Jan 24 10:34:48 milan kernel: [ 23.016775] cfg80211: Regulatory domain changed to country: FR
Jan 24 10:34:48 milan kernel: [ 23.016778] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:34:48 milan kernel: [ 23.016781] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 23.016783] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 23.016786] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:34:48 milan kernel: [ 23.016788] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 10:34:48 milan kernel: [ 23.087201] fuse init (API version 7.17)
Jan 24 10:34:48 milan kernel: [ 24.079590] device label home devid 1 transid 16129 /dev/sda6
Jan 24 10:34:48 milan kernel: [ 27.415553] ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 24 10:34:48 milan kernel: [ 27.421886] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jan 24 10:34:48 milan kernel: [ 28.001668] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jan 24 10:34:48 milan kernel: [ 28.001673] Bluetooth: BNEP filters: protocol multicast
Jan 24 10:34:48 milan dbus-daemon[1048]: dbus[1048]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Jan 24 10:34:47 milan NetworkManager[1039]: <info> VPN: loaded org.freedesktop.NetworkManager.openconnect
Jan 24 10:34:48 milan bluetoothd[986]: Parsing /etc/bluetooth/input.conf failed: No such file or directory
Jan 24 10:34:48 milan bluetoothd[986]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory
Jan 24 10:34:48 milan bluetoothd[986]: bluetoothd[986]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory
Jan 24 10:34:48 milan bluetoothd[986]: Listening for HCI events on hci0
Jan 24 10:34:48 milan bluetoothd[986]: bluetoothd[986]: Listening for HCI events on hci0
Jan 24 10:34:47 milan avahi-daemon[1040]: Successfully called chroot().
Jan 24 10:34:48 milan avahi-daemon[1040]: Successfully dropped remaining capabilities.
Jan 24 10:34:47 milan systemd-logind[1036]: New seat seat0.
Jan 24 10:34:48 milan dbus[1048]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Jan 24 10:34:48 milan avahi-daemon[1040]: Loading service file /services/ssh.service.
Jan 24 10:34:48 milan avahi-daemon[1040]: Loading service file /services/udisks.service.
Jan 24 10:34:48 milan avahi-daemon[1040]: Network interface enumeration completed.
Jan 24 10:34:48 milan avahi-daemon[1040]: Registering HINFO record with values 'X86_64'/'LINUX'.
Jan 24 10:34:48 milan avahi-daemon[1040]: Server startup complete. Host name is milan.local. Local service cookie is 4080002974.
Jan 24 10:34:48 milan avahi-daemon[1040]: Service "milan" (/services/udisks.service) successfully established.
Jan 24 10:34:48 milan avahi-daemon[1040]: Service "milan" (/services/ssh.service) successfully established.
Jan 24 10:34:48 milan dbus[1048]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Jan 24 10:34:48 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Jan 24 10:34:48 milan systemd[1]: PID file /var/run/iscsid.pid not readable (yet?) after start.
Jan 24 10:34:48 milan polkitd[1109]: started daemon version 0.102 using authority implementation `local' version `0.102'
Jan 24 10:34:48 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jan 24 10:34:48 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jan 24 10:34:48 milan bluetoothd[986]: HCI dev 0 up
Jan 24 10:34:48 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 up
Jan 24 10:34:48 milan bluetoothd[986]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
Jan 24 10:34:48 milan bluetoothd[986]: bluetoothd[986]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
Jan 24 10:34:48 milan systemd[1]: Unit iscsid.service entered failed state.
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: Acquired D-Bus service com.redhat.ifcfgrh1
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: Acquired D-Bus service com.redhat.ifcfgrh1
Jan 24 10:34:48 milan NetworkManager[1039]: <info> Loaded plugin ifcfg-rh: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> Loaded plugin ifcfg-rh: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Jan 24 10:34:48 milan NetworkManager[1039]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_WIFI_INED 1 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto WIFI_INED'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_DartyBox ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_WIFI_INED 1 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto WIFI_INED'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_DartyBox ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto DartyBox'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-lo ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto DartyBox'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-lo ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_LaGrange ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_LaGrange ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto LaGrange'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_ribeill 1 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto LaGrange'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_ribeill 1 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto ribeill'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto ribeill'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto Ensae.Ancien'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-NEUF_3F78 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto Ensae.Ancien'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-NEUF_3F78 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'NEUF_3F78'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_OzoneParis.net_:_acces_libre ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'NEUF_3F78'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_OzoneParis.net_:_acces_libre ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto OzoneParis.net : acces libre'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_WIFI_NAC ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto OzoneParis.net : acces libre'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_WIFI_NAC ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto WIFI_NAC'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Lecteurs_Bibl ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto WIFI_NAC'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Lecteurs_Bibl ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto Lecteurs_Bibl'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Bbox-A77034 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto Lecteurs_Bibl'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Bbox-A77034 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto Bbox-A77034'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto Bbox-A77034'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_NUMERICABLE-760E ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_NUMERICABLE-760E ...
Jan 24 10:34:48 milan kernel: [ 28.126834] Bluetooth: RFCOMM TTY layer initialized
Jan 24 10:34:48 milan kernel: [ 28.126839] Bluetooth: RFCOMM socket layer initialized
Jan 24 10:34:48 milan kernel: [ 28.126841] Bluetooth: RFCOMM ver 1.11
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto NUMERICABLE-760E'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_bv ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto NUMERICABLE-760E'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_bv ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto bv'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Wifi ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto bv'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Wifi ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto Ensae.Wifi'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_WIFI_INED ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto Ensae.Wifi'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_WIFI_INED ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto WIFI_INED'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-NEUF_CC50 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto WIFI_INED'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-NEUF_CC50 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'NEUF_CC50'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_default ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'NEUF_CC50'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_default ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto default'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Neuf_Wifi ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto Neuf Wifi'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Starbucks ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto default'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Neuf_Wifi ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto Neuf Wifi'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Starbucks ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto Starbucks'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_orange ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto Starbucks'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_orange ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto orange'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_bv-771865 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto orange'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_bv-771865 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto bv-771865'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_NETGEAR_-_0 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto bv-771865'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_NETGEAR_-_0 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto NETGEAR - 0'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_ribeill ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto NETGEAR - 0'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_ribeill ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto ribeill'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_NEUF_D438 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto ribeill'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_NEUF_D438 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto NEUF_D438'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_ENS_Cachan ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto NEUF_D438'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_ENS_Cachan ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto ENS Cachan'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien-1 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto ENS Cachan'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien-1 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto Ensae.Ancien'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_THOMSON ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto Ensae.Ancien'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_THOMSON ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto THOMSON'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Wanadoo_d1a5 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto THOMSON'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_Wanadoo_d1a5 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto Wanadoo_d1a5'
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_bv 1 ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto Wanadoo_d1a5'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Auto_bv 1 ...
Jan 24 10:34:48 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto bv'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto bv'
Jan 24 10:34:48 milan NetworkManager[1039]: keyfile: parsing ENS Cachan ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: keyfile: parsing ENS Cachan ...
Jan 24 10:34:48 milan NetworkManager[1039]: keyfile: read connection 'ENS Cachan'
Jan 24 10:34:48 milan NetworkManager[1039]: keyfile: parsing Cachan ...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: keyfile: read connection 'ENS Cachan'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: keyfile: parsing Cachan ...
Jan 24 10:34:48 milan NetworkManager[1039]: keyfile: read connection 'Cachan'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: keyfile: read connection 'Cachan'
Jan 24 10:34:48 milan NetworkManager[1039]: <info> trying to start the modem manager...
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> trying to start the modem manager...
Jan 24 10:34:48 milan NetworkManager[1039]: <info> monitoring kernel firmware directory '/lib/firmware'.
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> monitoring kernel firmware directory '/lib/firmware'.
Jan 24 10:34:48 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
Jan 24 10:34:48 milan dbus[1048]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
Jan 24 10:34:48 milan NetworkManager[1039]: <info> found WiFi radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy0/rfkill1) (driver (unknown))
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> found WiFi radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy0/rfkill1) (driver (unknown))
Jan 24 10:34:48 milan NetworkManager[1039]: <info> found WiFi radio killswitch rfkill2 (at /sys/devices/platform/hp-wmi/rfkill/rfkill2) (driver hp-wmi)
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> found WiFi radio killswitch rfkill2 (at /sys/devices/platform/hp-wmi/rfkill/rfkill2) (driver hp-wmi)
Jan 24 10:34:48 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.NetworkManager'
Jan 24 10:34:48 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.NetworkManager'
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> ModemManager (version 0.4.998-1.git20110706.fc16) starting...
Jan 24 10:34:48 milan modem-manager[1121]: <info> ModemManager (version 0.4.998-1.git20110706.fc16) starting...
Jan 24 10:34:48 milan NetworkManager[1039]: <info> WiFi enabled by radio killswitch; enabled by state file
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> WiFi enabled by radio killswitch; enabled by state file
Jan 24 10:34:48 milan NetworkManager[1039]: <info> WWAN enabled by radio killswitch; enabled by state file
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> WWAN enabled by radio killswitch; enabled by state file
Jan 24 10:34:48 milan NetworkManager[1039]: <info> WiMAX enabled by radio killswitch; enabled by state file
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> WiMAX enabled by radio killswitch; enabled by state file
Jan 24 10:34:48 milan NetworkManager[1039]: <info> Networking is enabled by state file
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> Networking is enabled by state file
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (em1): carrier is OFF
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): carrier is OFF
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (em1): new Ethernet device (driver: 'r8169' ifindex: 2)
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): new Ethernet device (driver: 'r8169' ifindex: 2)
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): exported as /org/freedesktop/NetworkManager/Devices/0
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (em1): exported as /org/freedesktop/NetworkManager/Devices/0
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (em1): now managed
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): now managed
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (em1): bringing up device.
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): bringing up device.
Jan 24 10:34:48 milan bluetoothd[986]: bluetoothd[986]: Adapter /org/bluez/986/hci0 has been enabled
Jan 24 10:34:48 milan bluetoothd[986]: Adapter /org/bluez/986/hci0 has been enabled
Jan 24 10:34:48 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.ModemManager'
Jan 24 10:34:48 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.ModemManager'
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin MotoC
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin MotoC
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Gobi
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Gobi
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Generic
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Generic
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin X22X
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin X22X
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Samsung
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Samsung
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Nokia
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Nokia
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Longcheer
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Longcheer
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Option High-Speed
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Option High-Speed
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Option
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Option
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin SimTech
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin SimTech
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin ZTE
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin ZTE
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin AnyData
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin AnyData
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Wavecom
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Wavecom
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Sierra
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Sierra
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Linktop
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Linktop
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Huawei
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Huawei
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Novatel
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Novatel
Jan 24 10:34:48 milan dbus-daemon[1048]: modem-manager[1121]: <info> Loaded plugin Ericsson MBM
Jan 24 10:34:48 milan modem-manager[1121]: <info> Loaded plugin Ericsson MBM
Jan 24 10:34:48 milan kernel: [ 28.209930] r8169 0000:01:00.0: em1: link down
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (em1): preparing device.
Jan 24 10:34:48 milan kernel: [ 28.210544] ADDRCONF(NETDEV_UP): em1: link is not ready
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): preparing device.
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 24 10:34:48 milan NetworkManager[1039]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/em1
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/em1
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 3)
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 3)
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): now managed
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): now managed
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 10:34:48 milan ntpdate[1134]: Can't find host 0.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:34:48 milan ntpdate[1134]: Can't find host 1.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:34:48 milan ntpdate[1134]: Can't find host 2.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:34:48 milan ntpdate[1134]: Can't find host 3.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:34:48 milan ntpdate[1134]: no servers can be used, exiting
Jan 24 10:34:48 milan kernel: [ 28.263500] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 10:34:48 milan kernel: [ 28.263510] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
Jan 24 10:34:48 milan kernel: [ 28.264496] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): preparing device.
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): preparing device.
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 10:34:48 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
Jan 24 10:34:48 milan dbus[1048]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
Jan 24 10:34:48 milan NetworkManager[1039]: <info> modem-manager is now available
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> modem-manager is now available
Jan 24 10:34:48 milan dbus[1048]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Jan 24 10:34:48 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> wpa_supplicant started
Jan 24 10:34:48 milan NetworkManager[1039]: <info> wpa_supplicant started
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 10:34:48 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 10:34:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 10:34:48 milan systemd[1]: iscsi.service: control process exited, code=exited status=3
Jan 24 10:34:48 milan systemd[1]: Unit iscsi.service entered failed state.
Jan 24 10:34:48 milan akmods[1058]: Checking kmods exist for 3.1.9-1.fc16.x86_64[ OK ]
Jan 24 10:34:48 milan systemd[1]: PID file /var/run/akmodsd.pid not readable (yet?) after start.
Jan 24 10:34:48 milan systemd[1]: Unit akmods.service entered failed state.
Jan 24 10:34:49 milan dbus[1048]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Jan 24 10:34:49 milan dbus-daemon[1048]: dbus[1048]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Jan 24 10:34:49 milan dbus[1048]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Jan 24 10:34:49 milan dbus-daemon[1048]: dbus[1048]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Jan 24 10:34:49 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.Accounts'
Jan 24 10:34:49 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.Accounts'
Jan 24 10:34:49 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jan 24 10:34:49 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jan 24 10:34:49 milan accounts-daemon[1208]: started daemon version 0.6.15
Jan 24 10:34:49 milan systemd-logind[1036]: New session 1 of user gdm.
Jan 24 10:34:49 milan systemd-logind[1036]: Linked /tmp/.X11-unix/X0 to /run/user/gdm/X11/display.
Jan 24 10:34:49 milan NetworkManager[1039]: NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 10:34:49 milan NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 10:34:49 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 10:34:49 milan NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 10:34:49 milan rsyslogd-2177: imuxsock begins to drop messages from pid 1039 due to rate-limiting
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): Enabling debugging
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/unix:@/tmp/.ICE-unix/1275,unix/unix:/tmp/.ICE-unix/1275#012
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GsmShell: Not connected to the shell
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GsmManager: setting client store 0xa77520
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41bf30
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41bf30
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41bf30
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41bf30
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41bf30
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): fill: *** Getting session 'gdm-shell'
Jan 24 10:34:49 milan gnome-session[1275]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/libexec/gnome-session-check-accelerated'' to know if session is runnable
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Checking required components and providers
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Done checking required components and providers
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Adding required components
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Done adding required components
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Adding default providers
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): fill: *** Done adding default providers
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: GSM starting to manage
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: App startup summary
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: Phase INITIALIZATION
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager:#011ID: /org/gnome/SessionManager/App2#011app-id:gnome-settings-daemon.desktop#011is-disabled:0#011is-conditionally-disabled:0
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: Phase PANEL
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: Phase DESKTOP
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: Phase APPLICATION
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager:#011ID: /org/gnome/SessionManager/App1#011app-id:gnome-shell.desktop#011is-disabled:0#011is-conditionally-disabled:0
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: starting phase INITIALIZATION#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/libexec/gnome-settings-daemon startup-id=107482d77d617275413273976905886900000012750001
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmAutostartApp: started pid:1285
Jan 24 10:34:50 milan dbus[1048]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
Jan 24 10:34:50 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
Jan 24 10:34:50 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.UPower'
Jan 24 10:34:50 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.UPower'
Jan 24 10:34:50 milan dbus[1048]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Jan 24 10:34:50 milan dbus-daemon[1048]: dbus[1048]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Jan 24 10:34:50 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Jan 24 10:34:50 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Jan 24 09:34:50 milan rtkit-daemon[1337]: Successfully made thread 1336 of process 1336 (/usr/bin/pulseaudio) owned by '42' high priority at nice level -11.
Jan 24 09:34:50 milan rtkit-daemon[1337]: Successfully made thread 1340 of process 1336 (/usr/bin/pulseaudio) owned by '42' RT at priority 5.
Jan 24 09:34:50 milan rtkit-daemon[1337]: Successfully made thread 1341 of process 1336 (/usr/bin/pulseaudio) owned by '42' RT at priority 5.
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: RegisterClient
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: Adding new client 107482d77d6172754132739769093558800000012750002 to session
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): uid = 42
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): pid = 1351
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: RegisterClient 107482d77d617275413273976905886900000012750001
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: Adding new client 107482d77d617275413273976905886900000012750001 to session
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): uid = 42
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): pid = 1285
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): App gnome-settings-daemon.desktop registered
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: ending phase INITIALIZATION#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: starting phase PANEL#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: ending phase PANEL#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: starting phase DESKTOP#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: ending phase DESKTOP#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: starting phase APPLICATION#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=107482d77d617275413273976905829600000012750000
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmAutostartApp: started pid:1353
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: ending phase APPLICATION#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmManager: starting phase RUNNING#012
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmPresence: adding idle watch
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:50 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmShell: Connected to the shell
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: Setting up new connection
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: New client '0xae3bf0 []'
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: Initializing client 0xae3bf0 []
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: Client '0xae3bf0 []' received RegisterClient(107482d77d617275413273976905829600000012750000)
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmManager: Adding new client 107482d77d617275413273976905829600000012750000 to session
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xae3bf0 [107482d77d617275413273976905829600000012750000]'
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: Set properties from client '0xae3bf0 [107482d77d617275413273976905829600000012750000]'
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: ProcessID = '1353'
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
Jan 24 10:34:51 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
Jan 24 10:34:51 milan dbus[1048]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 24 10:34:51 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 24 10:34:51 milan dbus-daemon[1048]: Launching FprintObject
Jan 24 10:34:51 milan dbus[1048]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 24 10:34:51 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 24 10:34:51 milan dbus-daemon[1048]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Jan 24 10:34:51 milan dbus-daemon[1048]: ** Message: entering main loop
Jan 24 10:34:55 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:55 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:57 milan systemd-logind[1036]: New session 2 of user milan.
Jan 24 10:34:57 milan systemd-logind[1036]: Linked /tmp/.X11-unix/X0 to /run/user/milan/X11/display.
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: handling signal 15
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41bf30
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): Got callback for signal 15
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Logout called
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmShell: Connected to the shell
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: requesting logout
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: ending phase RUNNING#012
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION#012
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): Caught signal 15, shutting down normally.
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GdmSignalHandler: Done handling signals
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: Client '0xae3bf0 [gnome-shell 107482d77d617275413273976905829600000012750000]' received SaveYourselfDone(success = True)
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xaecaa0, FALSE, 3, 9, 32771, 0)
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: query end session complete
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmShell: Connected to the shell
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION#012
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: starting phase END_SESSION#012
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: Client '0xae3bf0 [gnome-shell 107482d77d617275413273976905829600000012750000]' received SaveYourselfDone(success = True)
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xaecaa0, FALSE, 3, c, 32771, 0)
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: ending phase END_SESSION#012
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: starting phase EXIT#012
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xae3bf0 [gnome-shell 107482d77d617275413273976905829600000012750000]')
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: unable to find application for client - not restarting
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: Unreffing object: 0xac6ea0
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: Client '0xae3bf0 [gnome-shell 107482d77d617275413273976905829600000012750000]' received CloseConnection
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: disconnect client
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: Unreffing object: 0xae3bf0
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xae3bf0 [gnome-shell 107482d77d617275413273976905829600000012750000])
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: Unreffing object: 0xac6e20
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: last client disconnected - exiting
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: ending phase EXIT#012
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): Unreffing manager
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmManager: disposing manager
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: Clearing object store
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: Unreffing object: 0xab80a0
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: Unreffing object: 0xab8180
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: Clearing object store
Jan 24 10:34:57 milan gnome-session[1275]: DEBUG(+): GsmStore: Clearing object store
Jan 24 10:34:57 milan systemd-logind[1036]: Removed session 1.
Jan 24 10:34:57 milan gdm-simple-slave[1173]: WARNING: Child process 1275 was already dead.
Jan 24 10:34:58 milan ntpdate[1474]: Can't find host 0.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:34:58 milan ntpdate[1474]: Can't find host 1.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:34:58 milan ntpdate[1474]: Can't find host 2.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:34:58 milan ntpdate[1474]: Can't find host 3.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:34:58 milan ntpdate[1474]: no servers can be used, exiting
Jan 24 10:34:58 milan gnome-session[1381]: WARNING: Could not parse desktop file /home/milan/.config/autostart/jackstart.desktop: Le fichier de clés n'a pas de clé « Type »
Jan 24 10:34:58 milan gnome-session[1381]: WARNING: could not read /home/milan/.config/autostart/jackstart.desktop
Jan 24 10:34:58 milan gnome-session[1381]: WARNING: Could not parse desktop file /home/milan/.config/autostart/update-notifier.desktop: Le fichier de clés n'a pas de clé « Type »
Jan 24 10:34:58 milan gnome-session[1381]: WARNING: could not read /home/milan/.config/autostart/update-notifier.desktop
Jan 24 09:34:59 milan rtkit-daemon[1337]: Successfully made thread 1552 of process 1552 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jan 24 09:34:59 milan rtkit-daemon[1337]: Successfully made thread 1555 of process 1552 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jan 24 09:34:59 milan rtkit-daemon[1337]: Successfully made thread 1556 of process 1552 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jan 24 10:34:59 milan dbus[1048]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Jan 24 10:34:59 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Jan 24 10:34:59 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Jan 24 10:34:59 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Jan 24 10:34:59 milan dbus-daemon[1048]: (colord:1565): Cd-WARNING **: CdMain: failed to emit ProfileAdded: failed to register object: An object is already exported for the interface org.freedesktop.ColorManager.Profile at /org/freedesktop/ColorManager/profiles/icc_884d2a80d859873927528bb25654b1b6
Jan 24 10:34:59 milan dbus-daemon[1048]: (colord:1565): Cd-WARNING **: CdMain: failed to emit ProfileAdded: failed to register object: An object is already exported for the interface org.freedesktop.ColorManager.Profile at /org/freedesktop/ColorManager/profiles/icc_c92c9b7a677cc2839faa79677a084919
Jan 24 10:35:00 milan kernel: [ 40.755251] lp: driver loaded but no devices found
Jan 24 10:35:00 milan udev-configure-printer: Failed to get parent
Jan 24 10:35:00 milan kernel: [ 40.766629] ppdev: user-space parallel port driver
Jan 24 10:35:01 milan dbus-daemon[1048]: (colord:1565): Cd-WARNING **: failed to find profile /usr/share/color/icc/Argyll/ClayRGB1998.icm for override
Jan 24 10:35:01 milan dbus-daemon[1048]: (colord:1565): Cd-WARNING **: failed to find profile /usr/share/color/icc/Argyll/sRGB.icm for override
Jan 24 10:35:01 milan dbus-daemon[1048]: (colord:1565): Cd-WARNING **: failed to find profile /usr/share/color/icc/Argyll/ProPhotoRGB.icc for override
Jan 24 10:35:01 milan dbus[1048]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 24 10:35:01 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 24 10:35:01 milan dbus[1048]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Jan 24 10:35:01 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Jan 24 10:35:01 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jan 24 10:35:01 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jan 24 10:35:02 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 24 10:35:02 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 24 09:35:02 milan rtkit-daemon[1337]: Successfully made thread 1611 of process 1611 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jan 24 10:35:02 milan pulseaudio[1611]: pid.c: Daemon already running.
Jan 24 10:35:02 milan gnome-session[1381]: WARNING: Failed to start app: Unable to start application: L'exécution du processus fils « /usr/lib/gnome-user-share/gnome-user-share » a échoué (Aucun fichier ou dossier de ce type)
Jan 24 10:35:03 milan goa[1713]: goa-daemon version 3.2.1 starting [main.c:112, main()]
Jan 24 10:35:04 milan rsyslogd-2177: imuxsock lost 35 messages from pid 1039 due to rate-limiting
Jan 24 10:35:04 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 24 10:35:04 milan kernel: [ 43.986322] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 24 10:35:04 milan kernel: [ 43.986329] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 24 10:35:04 milan kernel: [ 43.986332] ieee80211 phy0: changing basic rates failed: -22
Jan 24 10:35:04 milan kernel: [ 43.986335] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Jan 24 10:35:04 milan kernel: [ 43.986675] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 24 10:35:04 milan kernel: [ 43.986774] cfg80211: Calling CRDA for country: FR
Jan 24 10:35:04 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 10:35:04 milan kernel: [ 43.994492] cfg80211: Regulatory domain changed to country: FR
Jan 24 10:35:04 milan kernel: [ 43.994495] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:35:04 milan kernel: [ 43.994497] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:35:04 milan kernel: [ 43.994499] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:35:04 milan kernel: [ 43.994501] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:35:04 milan kernel: [ 43.994503] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 10:35:04 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 24 10:35:04 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 24 10:35:04 milan NetworkManager[1039]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 24 10:35:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 24 10:35:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 24 10:35:04 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 24 10:35:04 milan NetworkManager[1039]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 24 10:35:04 milan NetworkManager[1039]: <info> dhclient started with pid 1732
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> dhclient started with pid 1732
Jan 24 10:35:04 milan NetworkManager[1039]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 24 10:35:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 24 10:35:04 milan dhclient[1732]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 24 10:35:04 milan dhclient[1732]: Copyright 2004-2012 Internet Systems Consortium.
Jan 24 10:35:04 milan dhclient[1732]: All rights reserved.
Jan 24 10:35:04 milan dhclient[1732]: For info, please visit https://www.isc.org/software/dhcp/
Jan 24 10:35:04 milan dhclient[1732]:
Jan 24 10:35:04 milan NetworkManager[1039]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 24 10:35:04 milan NetworkManager[1039]: Copyright 2004-2012 Internet Systems Consortium.
Jan 24 10:35:04 milan NetworkManager[1039]: All rights reserved.
Jan 24 10:35:04 milan NetworkManager[1039]: For info, please visit https://www.isc.org/software/dhcp/
Jan 24 10:35:04 milan dbus-daemon[1048]: dbus[1048]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.0" (uid=0 pid=986 comm="/usr/sbin/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.62" (uid=1000 pid=1612 comm="/usr/bin/gnome-shell ")
Jan 24 10:35:04 milan dbus[1048]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.0" (uid=0 pid=986 comm="/usr/sbin/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.62" (uid=1000 pid=1612 comm="/usr/bin/gnome-shell ")
Jan 24 10:35:04 milan NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 24 10:35:04 milan dhclient[1732]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:35:04 milan dhclient[1732]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:35:04 milan NetworkManager[1039]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:35:04 milan NetworkManager[1039]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:35:04 milan dhclient[1732]: Sending on Socket/fallback
Jan 24 10:35:04 milan NetworkManager[1039]: Sending on Socket/fallback
Jan 24 10:35:04 milan dhclient[1732]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 24 10:35:04 milan NetworkManager[1039]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 24 10:35:04 milan dhclient[1732]: DHCPACK from 10.92.72.1
Jan 24 10:35:04 milan NetworkManager[1039]: DHCPACK from 10.92.72.1
Jan 24 10:35:04 milan dhclient[1732]: bound to 10.92.72.73 -- renewal in 286228 seconds.
Jan 24 10:35:04 milan NetworkManager[1039]: bound to 10.92.72.73 -- renewal in 286228 seconds.
Jan 24 10:35:04 milan NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 24 10:35:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 24 10:35:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 24 10:35:04 milan NetworkManager[1039]: <info> address 10.92.72.73
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> address 10.92.72.73
Jan 24 10:35:04 milan NetworkManager[1039]: <info> prefix 23 (255.255.254.0)
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> prefix 23 (255.255.254.0)
Jan 24 10:35:04 milan NetworkManager[1039]: <info> gateway 10.92.72.1
Jan 24 10:35:04 milan NetworkManager[1039]: <info> nameserver '83.145.66.194'
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> gateway 10.92.72.1
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> nameserver '83.145.66.194'
Jan 24 10:35:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 24 10:35:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 24 10:35:05 milan avahi-daemon[1040]: Registering new address record for fe80::72f3:95ff:fe36:83df on wlan0.*.
Jan 24 10:35:18 milan ntpdate[1845]: Can't find host 0.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:35:18 milan ntpdate[1845]: Can't find host 1.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:35:18 milan ntpdate[1845]: Can't find host 2.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:35:18 milan ntpdate[1845]: Can't find host 3.fedora.pool.ntp.org: Name or service not known (-2)
Jan 24 10:35:18 milan ntpdate[1845]: no servers can be used, exiting
Jan 24 10:35:18 milan systemd[1]: ntpdate.service: main process exited, code=exited, status=1
Jan 24 10:35:18 milan systemd[1]: Unit ntpdate.service entered failed state.
Jan 24 10:35:18 milan ntpd[1847]: ntpd 4.2.6p4@1.2324-o Thu Oct 6 15:37:57 UTC 2011 (1)
Jan 24 10:35:18 milan ntpd[1847]: proto: precision = 0.080 usec
Jan 24 10:35:18 milan ntpd[1847]: 0.0.0.0 c01d 0d kern kernel time sync enabled
Jan 24 10:35:18 milan ntpd[1847]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Jan 24 10:35:18 milan ntpd[1847]: Listen and drop on 1 v6wildcard :: UDP 123
Jan 24 10:35:18 milan ntpd[1847]: Listen normally on 2 lo 127.0.0.1 UDP 123
Jan 24 10:35:18 milan ntpd[1847]: Listen normally on 3 wlan0 fe80::72f3:95ff:fe36:83df UDP 123
Jan 24 10:35:18 milan ntpd[1847]: Listen normally on 4 lo ::1 UDP 123
Jan 24 10:35:18 milan ntpd[1847]: peers refreshed
Jan 24 10:35:18 milan ntpd[1847]: Listening on routing socket on fd #21 for interface updates
Jan 24 10:35:18 milan ntpd[1847]: Deferring DNS for 0.fedora.pool.ntp.org 1
Jan 24 10:35:18 milan ntpd[1847]: Deferring DNS for 1.fedora.pool.ntp.org 1
Jan 24 10:35:18 milan ntpd[1847]: Deferring DNS for 2.fedora.pool.ntp.org 1
Jan 24 10:35:18 milan ntpd[1847]: Deferring DNS for 3.fedora.pool.ntp.org 1
Jan 24 10:35:18 milan ntpd[1847]: 0.0.0.0 c016 06 restart
Jan 24 10:35:18 milan ntpd[1847]: 0.0.0.0 c012 02 freq_set kernel 12.031 PPM
Jan 24 10:35:20 milan ntpd_intres[1848]: host name not found: 0.fedora.pool.ntp.org
Jan 24 10:35:20 milan ntpd_intres[1848]: host name not found: 1.fedora.pool.ntp.org
Jan 24 10:35:20 milan ntpd_intres[1848]: host name not found: 2.fedora.pool.ntp.org
Jan 24 10:35:20 milan ntpd_intres[1848]: host name not found: 3.fedora.pool.ntp.org
Jan 24 10:35:22 milan dbus-daemon[1048]: ** Message: No devices in use, exit
Jan 24 10:35:24 milan NetworkManager[1039]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 24 10:35:24 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 24 10:35:24 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 24 10:35:24 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 24 10:35:24 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 24 10:35:24 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 24 10:35:24 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 24 10:35:24 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 24 10:35:24 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 24 10:35:24 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 24 10:35:24 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 24 10:35:24 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 24 10:35:24 milan avahi-daemon[1040]: Joining mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 24 10:35:24 milan kernel: [ 64.070784] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 24 10:35:24 milan avahi-daemon[1040]: New relevant interface wlan0.IPv4 for mDNS.
Jan 24 10:35:24 milan avahi-daemon[1040]: Registering new address record for 10.92.72.73 on wlan0.IPv4.
Jan 24 10:35:25 milan NetworkManager[1039]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 24 10:35:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 24 10:35:25 milan NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:44:8B:4A (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 24 10:35:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:44:8B:4A (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 24 10:35:25 milan ntpd[1847]: Listen normally on 5 wlan0 10.92.72.73 UDP 123
Jan 24 10:35:25 milan ntpd[1847]: peers refreshed
Jan 24 10:35:25 milan NetworkManager[1039]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 24 10:35:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 24 10:35:25 milan NetworkManager[1039]: <info> Activation (wlan0) successful, device activated.
Jan 24 10:35:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) successful, device activated.
Jan 24 10:35:25 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 24 10:35:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 24 10:35:25 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 10:35:25 milan dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 10:35:25 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 10:35:25 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 10:35:27 milan ntpd_intres[1848]: DNS 0.fedora.pool.ntp.org -> 88.190.25.158
Jan 24 10:35:27 milan ntpd_intres[1848]: DNS 1.fedora.pool.ntp.org -> 88.191.130.213
Jan 24 10:35:27 milan ntpd_intres[1848]: DNS 2.fedora.pool.ntp.org -> 91.121.52.147
Jan 24 10:35:27 milan ntpd_intres[1848]: DNS 3.fedora.pool.ntp.org -> 87.98.139.226
Jan 24 10:35:29 milan kernel: [ 69.245855] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:35:29 milan kernel: [ 69.246165] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:35:29 milan kernel: [ 69.247237] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:36:25 milan systemd[1]: Startup finished in 1s 753ms 281us (kernel) + 3s 639ms 175us (initrd) + 2min 177ms 684us (userspace) = 2min 5s 570ms 140us.
Jan 24 10:36:38 milan ntpd[1847]: 0.0.0.0 c61c 0c clock_step -0.333236 s
Jan 24 10:36:38 milan ntpd[1847]: 0.0.0.0 c614 04 freq_mode
Jan 24 10:36:39 milan ntpd[1847]: 0.0.0.0 c618 08 no_sys_peer
Jan 24 10:37:20 milan kernel: [ 180.725947] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:37:58 milan NetworkManager[1039]: <info> sleep requested (sleeping: no enabled: yes)
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> sleep requested (sleeping: no enabled: yes)
Jan 24 10:37:58 milan NetworkManager[1039]: <info> sleeping or disabling...
Jan 24 10:37:58 milan NetworkManager[1039]: <info> (em1): now unmanaged
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> sleeping or disabling...
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): now unmanaged
Jan 24 10:37:58 milan NetworkManager[1039]: <info> (em1): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Jan 24 10:37:58 milan NetworkManager[1039]: <info> (em1): cleaning up...
Jan 24 10:37:58 milan NetworkManager[1039]: <info> (em1): taking down device.
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): cleaning up...
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): taking down device.
Jan 24 10:37:58 milan NetworkManager[1039]: <info> (wlan0): now unmanaged
Jan 24 10:37:58 milan NetworkManager[1039]: <info> (wlan0): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Jan 24 10:37:58 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'sleeping') [37]
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): now unmanaged
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'sleeping') [37]
Jan 24 10:37:58 milan kernel: [ 218.460095] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:37:58 milan kernel: [ 218.461333] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:37:58 milan NetworkManager[1039]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 1732
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 1732
Jan 24 10:37:58 milan kernel: [ 218.648665] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 10:37:58 milan kernel: [ 218.648677] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
Jan 24 10:37:58 milan kernel: [ 218.648685] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
Jan 24 10:37:58 milan kernel: [ 218.684855] cfg80211: Calling CRDA to update world regulatory domain
Jan 24 10:37:58 milan avahi-daemon[1040]: Withdrawing address record for 10.92.72.73 on wlan0.
Jan 24 10:37:58 milan avahi-daemon[1040]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 24 10:37:58 milan avahi-daemon[1040]: Interface wlan0.IPv4 no longer relevant for mDNS.
Jan 24 10:37:58 milan NetworkManager[1039]: <info> (wlan0): cleaning up...
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): cleaning up...
Jan 24 10:37:58 milan NetworkManager[1039]: <info> (wlan0): taking down device.
Jan 24 10:37:58 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): taking down device.
Jan 24 10:37:58 milan avahi-daemon[1040]: Withdrawing address record for fe80::72f3:95ff:fe36:83df on wlan0.
Jan 24 10:37:58 milan kernel: [ 218.701057] cfg80211: World regulatory domain updated:
Jan 24 10:37:58 milan kernel: [ 218.701062] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:37:58 milan kernel: [ 218.701066] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:37:58 milan kernel: [ 218.701069] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:37:58 milan kernel: [ 218.701072] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:37:58 milan kernel: [ 218.701075] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:37:58 milan kernel: [ 218.701077] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:37:58 milan kernel: [ 218.701094] cfg80211: Calling CRDA for country: FR
Jan 24 10:37:58 milan dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 10:37:58 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 10:37:58 milan kernel: [ 218.706033] cfg80211: Regulatory domain changed to country: FR
Jan 24 10:37:58 milan kernel: [ 218.706036] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:37:58 milan kernel: [ 218.706038] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:37:58 milan kernel: [ 218.706040] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:37:58 milan kernel: [ 218.706042] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:37:58 milan kernel: [ 218.706043] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 10:37:58 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 10:37:58 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 10:38:00 milan ntpd[1847]: Deleting interface #5 wlan0, 10.92.72.73#123, interface stats: received=36, sent=40, dropped=0, active_time=155 secs
Jan 24 10:38:00 milan ntpd[1847]: 87.98.139.226 interface 10.92.72.73 -> (none)
Jan 24 10:38:00 milan ntpd[1847]: 91.121.52.147 interface 10.92.72.73 -> (none)
Jan 24 10:38:00 milan ntpd[1847]: 88.191.130.213 interface 10.92.72.73 -> (none)
Jan 24 10:38:00 milan ntpd[1847]: 88.190.25.158 interface 10.92.72.73 -> (none)
Jan 24 10:38:00 milan ntpd[1847]: Deleting interface #3 wlan0, fe80::72f3:95ff:fe36:83df#123, interface stats: received=0, sent=0, dropped=0, active_time=162 secs
Jan 24 10:38:00 milan ntpd[1847]: peers refreshed
Jan 24 10:38:00 milan kernel: [ 220.333453] PM: Syncing filesystems ... done.
Jan 24 10:38:07 milan kernel: [ 220.498875] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jan 24 10:38:07 milan kernel: [ 220.509668] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jan 24 10:38:07 milan kernel: [ 220.520743] Suspending console(s) (use no_console_suspend to debug)
Jan 24 10:38:07 milan kernel: [ 220.521120] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jan 24 10:38:07 milan kernel: [ 220.521275] sd 0:0:0:0: [sda] Stopping disk
Jan 24 10:38:07 milan kernel: [ 220.577481] ehci_hcd 0000:00:1d.0: PCI INT A disabled
Jan 24 10:38:07 milan kernel: [ 220.577491] ehci_hcd 0000:00:1a.0: PCI INT A disabled
Jan 24 10:38:07 milan kernel: [ 220.769447] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Jan 24 10:38:07 milan kernel: [ 221.120617] PM: suspend of devices complete after 600.761 msecs
Jan 24 10:38:07 milan kernel: [ 221.140495] r8169 0000:01:00.0: wake-up capability enabled by ACPI
Jan 24 10:38:07 milan kernel: [ 221.173511] PM: late suspend of devices complete after 52.975 msecs
Jan 24 10:38:07 milan kernel: [ 221.173670] ACPI: Preparing to enter system sleep state S3
Jan 24 10:38:07 milan kernel: [ 221.219725] PM: Saving platform NVS memory
Jan 24 10:38:07 milan kernel: [ 221.223356] Disabling non-boot CPUs ...
Jan 24 10:38:07 milan kernel: [ 221.225547] CPU 1 is now offline
Jan 24 10:38:07 milan kernel: [ 221.227743] CPU 2 is now offline
Jan 24 10:38:07 milan kernel: [ 221.229534] CPU 3 is now offline
Jan 24 10:38:07 milan kernel: [ 221.229998] Extended CMOS year: 2000
Jan 24 10:38:07 milan kernel: [ 221.230207] ACPI: Low-level resume complete
Jan 24 10:38:07 milan kernel: [ 221.230264] PM: Restoring platform NVS memory
Jan 24 10:38:07 milan kernel: [ 221.230827] Extended CMOS year: 2000
Jan 24 10:38:07 milan kernel: [ 221.231051] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
Jan 24 10:38:07 milan kernel: [ 221.231058] Enabling non-boot CPUs ...
Jan 24 10:38:07 milan kernel: [ 221.231195] Booting Node 0 Processor 1 APIC 0x1
Jan 24 10:38:07 milan kernel: [ 221.242198] Calibrating delay loop (skipped) already calibrated this CPU
Jan 24 10:38:07 milan kernel: [ 221.262579] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:38:07 milan kernel: [ 221.262840] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:38:07 milan kernel: [ 221.262845] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:38:07 milan kernel: [ 221.262850] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:38:07 milan kernel: [ 221.262854] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880150d998c0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:38:07 milan kernel: [ 221.262887] CPU1 is up
Jan 24 10:38:07 milan kernel: [ 221.262960] Booting Node 0 Processor 2 APIC 0x4
Jan 24 10:38:07 milan kernel: [ 221.263048] Switched to NOHz mode on CPU #1
Jan 24 10:38:07 milan kernel: [ 221.273961] Calibrating delay loop (skipped) already calibrated this CPU
Jan 24 10:38:07 milan kernel: [ 221.294311] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:38:07 milan kernel: [ 221.294609] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:38:07 milan kernel: [ 221.294615] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:38:07 milan kernel: [ 221.294620] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:38:07 milan kernel: [ 221.294624] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880150d99b18), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:38:07 milan kernel: [ 221.294821] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
Jan 24 10:38:07 milan kernel: [ 221.294835] CPU2 is up
Jan 24 10:38:07 milan kernel: [ 221.294902] Booting Node 0 Processor 3 APIC 0x5
Jan 24 10:38:07 milan kernel: [ 221.294992] Switched to NOHz mode on CPU #2
Jan 24 10:38:07 milan kernel: [ 221.305903] Calibrating delay loop (skipped) already calibrated this CPU
Jan 24 10:38:07 milan kernel: [ 221.326260] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:38:07 milan kernel: [ 221.326531] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:38:07 milan kernel: [ 221.326536] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:38:07 milan kernel: [ 221.326541] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:38:07 milan kernel: [ 221.326545] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880150d99a78), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:38:07 milan kernel: [ 221.326601] CPU3 is up
Jan 24 10:38:07 milan kernel: [ 221.328445] Switched to NOHz mode on CPU #3
Jan 24 10:38:07 milan kernel: [ 221.328833] ACPI: Waking up from system sleep state S3
Jan 24 09:38:07 milan rtkit-daemon[1337]: The canary thread is apparently starving. Taking action.
Jan 24 09:38:07 milan rtkit-daemon[1337]: Demoting known real-time threads.
Jan 24 09:38:07 milan rtkit-daemon[1337]: Successfully demoted thread 1556 of process 1552 (/usr/bin/pulseaudio).
Jan 24 09:38:07 milan rtkit-daemon[1337]: Successfully demoted thread 1555 of process 1552 (/usr/bin/pulseaudio).
Jan 24 09:38:07 milan rtkit-daemon[1337]: Successfully demoted thread 1552 of process 1552 (/usr/bin/pulseaudio).
Jan 24 09:38:07 milan rtkit-daemon[1337]: Demoted 3 threads.
Jan 24 10:38:07 milan kernel: [ 221.450025] PM: early resume of devices complete after 0.772 msecs
Jan 24 10:38:07 milan kernel: [ 221.450165] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 24 10:38:07 milan kernel: [ 221.450171] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jan 24 10:38:07 milan kernel: [ 221.450185] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jan 24 10:38:07 milan kernel: [ 221.450471] sd 0:0:0:0: [sda] Starting disk
Jan 24 10:38:07 milan kernel: [ 221.515749] power_supply BAT0: parent PNP0C0A:00 should not be sleeping
Jan 24 10:38:07 milan kernel: [ 221.525201] r8169 0000:01:00.0: wake-up capability disabled by ACPI
Jan 24 10:38:07 milan kernel: [ 221.598998] [drm:ironlake_update_pch_refclk] *ERROR* enabling SSC on PCH
Jan 24 10:38:07 milan kernel: [ 221.620516] Extended CMOS year: 2000
Jan 24 10:38:07 milan kernel: [ 221.681573] usb 1-1.4: reset full speed USB device number 3 using ehci_hcd
Jan 24 10:38:07 milan kernel: [ 221.754254] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 10:38:07 milan kernel: [ 221.758277] ata5: SATA link down (SStatus 0 SControl 300)
Jan 24 10:38:07 milan kernel: [ 221.823352] ata2.00: configured for UDMA/100
Jan 24 10:38:07 milan kernel: [ 221.839256] usb 2-1.3: reset full speed USB device number 3 using ehci_hcd
Jan 24 10:38:07 milan kernel: [ 221.926093] btusb 2-1.3:1.0: no reset_resume for driver btusb?
Jan 24 10:38:07 milan kernel: [ 221.926098] btusb 2-1.3:1.1: no reset_resume for driver btusb?
Jan 24 10:38:07 milan kernel: [ 221.997001] usb 2-1.6: reset high speed USB device number 5 using ehci_hcd
Jan 24 10:38:07 milan kernel: [ 223.232724] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 24 10:38:07 milan kernel: [ 223.234850] ata1.00: configured for UDMA/100
Jan 24 10:38:07 milan kernel: [ 223.899975] PM: resume of devices complete after 2454.154 msecs
Jan 24 10:38:07 milan bluetoothd[986]: HCI dev 0 down
Jan 24 10:38:07 milan bluetoothd[986]: Adapter /org/bluez/986/hci0 has been disabled
Jan 24 10:38:07 milan bluetoothd[986]: HCI dev 0 unregistered
Jan 24 10:38:07 milan bluetoothd[986]: Stopping hci0 event socket
Jan 24 10:38:07 milan bluetoothd[986]: Unregister path: /org/bluez/986/hci0
Jan 24 10:38:07 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 down
Jan 24 10:38:07 milan bluetoothd[986]: bluetoothd[986]: Adapter /org/bluez/986/hci0 has been disabled
Jan 24 10:38:07 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 unregistered
Jan 24 10:38:07 milan bluetoothd[986]: bluetoothd[986]: Stopping hci0 event socket
Jan 24 10:38:07 milan bluetoothd[986]: bluetoothd[986]: Unregister path: /org/bluez/986/hci0
Jan 24 10:38:07 milan bluetoothd[986]: HCI dev 0 registered
Jan 24 10:38:07 milan bluetoothd[986]: Listening for HCI events on hci0
Jan 24 10:38:07 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 registered
Jan 24 10:38:07 milan bluetoothd[986]: bluetoothd[986]: Listening for HCI events on hci0
Jan 24 10:38:07 milan kernel: [ 223.900506] Restarting tasks ... done.
Jan 24 10:38:07 milan kernel: [ 223.908329] video LNXVIDEO:00: Restoring backlight state
Jan 24 10:38:07 milan systemd[1]: Service bluetooth.target is not needed anymore. Stopping.
Jan 24 10:38:08 milan dbus[1048]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.62" (uid=1000 pid=1612 comm="/usr/bin/gnome-shell ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.0" (uid=0 pid=986 comm="/usr/sbin/bluetoothd -n ")
Jan 24 10:38:08 milan dbus-daemon[1048]: dbus[1048]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.62" (uid=1000 pid=1612 comm="/usr/bin/gnome-shell ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.0" (uid=0 pid=986 comm="/usr/sbin/bluetoothd -n ")
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> wake requested (sleeping: yes enabled: yes)
Jan 24 10:38:08 milan NetworkManager[1039]: <info> wake requested (sleeping: yes enabled: yes)
Jan 24 10:38:08 milan NetworkManager[1039]: <info> waking up and re-enabling...
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> waking up and re-enabling...
Jan 24 10:38:08 milan NetworkManager[1039]: <info> WWAN now enabled by management service
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> WWAN now enabled by management service
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (em1): now managed
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): now managed
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (em1): bringing up device.
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): bringing up device.
Jan 24 10:38:08 milan kernel: [ 224.278171] r8169 0000:01:00.0: em1: link down
Jan 24 10:38:08 milan kernel: [ 224.278594] ADDRCONF(NETDEV_UP): em1: link is not ready
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (em1): preparing device.
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): preparing device.
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (wlan0): now managed
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): now managed
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 10:38:08 milan kernel: [ 224.326654] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 10:38:08 milan kernel: [ 224.326668] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (wlan0): preparing device.
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): preparing device.
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 10:38:08 milan kernel: [ 224.328942] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 10:38:08 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 10:38:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 10:38:08 milan dbus[1048]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 24 10:38:08 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 24 10:38:08 milan dbus-daemon[1048]: Launching FprintObject
Jan 24 10:38:08 milan dbus[1048]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 24 10:38:08 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 24 10:38:08 milan dbus-daemon[1048]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Jan 24 10:38:08 milan dbus-daemon[1048]: ** Message: entering main loop
Jan 24 10:38:08 milan kernel: [ 224.908786] Bluetooth: hci0 command tx timeout
Jan 24 10:38:08 milan bluetoothd[986]: HCI dev 0 up
Jan 24 10:38:08 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 up
Jan 24 10:38:08 milan bluetoothd[986]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
Jan 24 10:38:08 milan bluetoothd[986]: bluetoothd[986]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
Jan 24 10:38:08 milan bluetoothd[986]: Adapter /org/bluez/986/hci0 has been enabled
Jan 24 10:38:08 milan bluetoothd[986]: bluetoothd[986]: Adapter /org/bluez/986/hci0 has been enabled
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 10:38:10 milan NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 10:38:10 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 10:38:10 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 10:38:10 milan NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 10:38:10 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 10:38:10 milan NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 10:38:10 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 24 10:38:10 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> associating
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> associating
Jan 24 10:38:10 milan kernel: [ 226.957306] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 24 10:38:10 milan kernel: [ 226.957317] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 24 10:38:10 milan kernel: [ 226.957323] ieee80211 phy0: changing basic rates failed: -22
Jan 24 10:38:10 milan kernel: [ 226.957328] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Jan 24 10:38:10 milan kernel: [ 226.958348] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 24 10:38:10 milan kernel: [ 226.958455] cfg80211: Calling CRDA for country: FR
Jan 24 10:38:10 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 10:38:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 10:38:11 milan kernel: [ 226.972046] cfg80211: Regulatory domain changed to country: FR
Jan 24 10:38:11 milan kernel: [ 226.972051] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:38:11 milan kernel: [ 226.972056] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:38:11 milan kernel: [ 226.972061] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:38:11 milan kernel: [ 226.972065] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:38:11 milan kernel: [ 226.972068] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 10:38:11 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> completed
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> completed
Jan 24 10:38:11 milan NetworkManager[1039]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 24 10:38:11 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 24 10:38:11 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 24 10:38:11 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 24 10:38:11 milan NetworkManager[1039]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 24 10:38:11 milan NetworkManager[1039]: <info> dhclient started with pid 2266
Jan 24 10:38:11 milan NetworkManager[1039]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> dhclient started with pid 2266
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 24 10:38:11 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 24 10:38:11 milan dhclient[2266]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 24 10:38:11 milan dhclient[2266]: Copyright 2004-2012 Internet Systems Consortium.
Jan 24 10:38:11 milan dhclient[2266]: All rights reserved.
Jan 24 10:38:11 milan dhclient[2266]: For info, please visit https://www.isc.org/software/dhcp/
Jan 24 10:38:11 milan dhclient[2266]:
Jan 24 10:38:11 milan NetworkManager[1039]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 24 10:38:11 milan NetworkManager[1039]: Copyright 2004-2012 Internet Systems Consortium.
Jan 24 10:38:11 milan NetworkManager[1039]: All rights reserved.
Jan 24 10:38:11 milan NetworkManager[1039]: For info, please visit https://www.isc.org/software/dhcp/
Jan 24 10:38:11 milan NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 24 10:38:11 milan dhclient[2266]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:38:11 milan dhclient[2266]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:38:11 milan NetworkManager[1039]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:38:11 milan NetworkManager[1039]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:38:11 milan dhclient[2266]: Sending on Socket/fallback
Jan 24 10:38:11 milan dhclient[2266]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 24 10:38:11 milan NetworkManager[1039]: Sending on Socket/fallback
Jan 24 10:38:11 milan NetworkManager[1039]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 24 10:38:11 milan dhclient[2266]: DHCPACK from 10.92.72.1
Jan 24 10:38:11 milan NetworkManager[1039]: DHCPACK from 10.92.72.1
Jan 24 10:38:11 milan dhclient[2266]: bound to 10.92.72.73 -- renewal in 255557 seconds.
Jan 24 10:38:11 milan NetworkManager[1039]: bound to 10.92.72.73 -- renewal in 255557 seconds.
Jan 24 10:38:11 milan NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 24 10:38:11 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 24 10:38:11 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 24 10:38:11 milan NetworkManager[1039]: <info> address 10.92.72.73
Jan 24 10:38:11 milan NetworkManager[1039]: <info> prefix 23 (255.255.254.0)
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> address 10.92.72.73
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> prefix 23 (255.255.254.0)
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> gateway 10.92.72.1
Jan 24 10:38:11 milan NetworkManager[1039]: <info> gateway 10.92.72.1
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> nameserver '83.145.66.194'
Jan 24 10:38:11 milan NetworkManager[1039]: <info> nameserver '83.145.66.194'
Jan 24 10:38:11 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 24 10:38:11 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 24 10:38:12 milan avahi-daemon[1040]: Registering new address record for fe80::72f3:95ff:fe36:83df on wlan0.*.
Jan 24 10:38:14 milan ntpd[1847]: Listen normally on 6 wlan0 fe80::72f3:95ff:fe36:83df UDP 123
Jan 24 10:38:14 milan ntpd[1847]: peers refreshed
Jan 24 10:38:31 milan NetworkManager[1039]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 24 10:38:31 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 24 10:38:31 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 24 10:38:31 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 24 10:38:31 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 24 10:38:31 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 24 10:38:31 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 24 10:38:31 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 24 10:38:31 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 24 10:38:31 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 24 10:38:31 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 24 10:38:31 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 24 10:38:31 milan kernel: [ 247.751474] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 24 10:38:31 milan avahi-daemon[1040]: Joining mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 24 10:38:31 milan avahi-daemon[1040]: New relevant interface wlan0.IPv4 for mDNS.
Jan 24 10:38:31 milan avahi-daemon[1040]: Registering new address record for 10.92.72.73 on wlan0.IPv4.
Jan 24 10:38:32 milan NetworkManager[1039]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 24 10:38:32 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 24 10:38:32 milan NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:1A:A7:D2 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 24 10:38:32 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:1A:A7:D2 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 24 10:38:32 milan NetworkManager[1039]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 24 10:38:32 milan NetworkManager[1039]: NetworkManager[1039]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 24 10:38:32 milan NetworkManager[1039]: <info> Activation (wlan0) successful, device activated.
Jan 24 10:38:32 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) successful, device activated.
Jan 24 10:38:32 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 24 10:38:32 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 24 10:38:33 milan ntpd[1847]: Listen normally on 7 wlan0 10.92.72.73 UDP 123
Jan 24 10:38:33 milan ntpd[1847]: peers refreshed
Jan 24 10:38:34 milan ntpd[1847]: 0.0.0.0 c628 08 no_sys_peer
Jan 24 10:38:38 milan dbus-daemon[1048]: ** Message: No devices in use, exit
Jan 24 10:38:54 milan kernel: [ 270.781609] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:38:59 milan kernel: [ 275.168086] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:38:59 milan kernel: [ 275.169564] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:39:00 milan kernel: [ 276.720001] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:39:01 milan kernel: [ 277.426568] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:39:02 milan kernel: [ 278.312414] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:39:02 milan kernel: [ 278.313361] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:39:02 milan kernel: [ 278.313957] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:39:02 milan NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:E9:27:72 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 24 10:39:02 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:E9:27:72 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 24 10:39:05 milan kernel: [ 281.662084] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:39:05 milan kernel: [ 281.662497] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> sleep requested (sleeping: no enabled: yes)
Jan 24 10:39:06 milan NetworkManager[1039]: <info> sleep requested (sleeping: no enabled: yes)
Jan 24 10:39:06 milan NetworkManager[1039]: <info> sleeping or disabling...
Jan 24 10:39:06 milan NetworkManager[1039]: <info> (em1): now unmanaged
Jan 24 10:39:06 milan NetworkManager[1039]: <info> (em1): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Jan 24 10:39:06 milan NetworkManager[1039]: <info> (em1): cleaning up...
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> sleeping or disabling...
Jan 24 10:39:06 milan NetworkManager[1039]: <info> (em1): taking down device.
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): now unmanaged
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): cleaning up...
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): taking down device.
Jan 24 10:39:06 milan NetworkManager[1039]: <info> (wlan0): now unmanaged
Jan 24 10:39:06 milan NetworkManager[1039]: <info> (wlan0): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): now unmanaged
Jan 24 10:39:06 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'sleeping') [37]
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'sleeping') [37]
Jan 24 10:39:06 milan NetworkManager[1039]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 2266
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 2266
Jan 24 10:39:06 milan kernel: [ 282.802213] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 10:39:06 milan kernel: [ 282.802331] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
Jan 24 10:39:06 milan kernel: [ 282.802339] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
Jan 24 10:39:06 milan avahi-daemon[1040]: Withdrawing address record for 10.92.72.73 on wlan0.
Jan 24 10:39:06 milan avahi-daemon[1040]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 24 10:39:06 milan kernel: [ 282.844268] cfg80211: Calling CRDA to update world regulatory domain
Jan 24 10:39:06 milan avahi-daemon[1040]: Interface wlan0.IPv4 no longer relevant for mDNS.
Jan 24 10:39:06 milan NetworkManager[1039]: <info> (wlan0): cleaning up...
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): cleaning up...
Jan 24 10:39:06 milan NetworkManager[1039]: <info> (wlan0): taking down device.
Jan 24 10:39:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): taking down device.
Jan 24 10:39:06 milan avahi-daemon[1040]: Withdrawing address record for fe80::72f3:95ff:fe36:83df on wlan0.
Jan 24 10:39:06 milan kernel: [ 282.856336] cfg80211: World regulatory domain updated:
Jan 24 10:39:06 milan kernel: [ 282.856340] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:39:06 milan kernel: [ 282.856343] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:39:06 milan kernel: [ 282.856346] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:39:06 milan kernel: [ 282.856349] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:39:06 milan kernel: [ 282.856352] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:39:06 milan kernel: [ 282.856355] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:39:06 milan kernel: [ 282.856371] cfg80211: Calling CRDA for country: FR
Jan 24 10:39:06 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 10:39:06 milan dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 10:39:06 milan kernel: [ 282.859650] cfg80211: Regulatory domain changed to country: FR
Jan 24 10:39:06 milan kernel: [ 282.859654] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:39:06 milan kernel: [ 282.859656] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:39:06 milan kernel: [ 282.859659] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:39:06 milan kernel: [ 282.859661] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:39:06 milan kernel: [ 282.859664] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 10:39:07 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 10:39:07 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 10:39:08 milan ntpd[1847]: Deleting interface #7 wlan0, 10.92.72.73#123, interface stats: received=4, sent=4, dropped=0, active_time=35 secs
Jan 24 10:39:08 milan ntpd[1847]: 88.190.25.158 interface 10.92.72.73 -> (none)
Jan 24 10:39:08 milan ntpd[1847]: 91.121.52.147 interface 10.92.72.73 -> (none)
Jan 24 10:39:08 milan ntpd[1847]: 87.98.139.226 interface 10.92.72.73 -> (none)
Jan 24 10:39:08 milan ntpd[1847]: 88.191.130.213 interface 10.92.72.73 -> (none)
Jan 24 10:39:08 milan ntpd[1847]: Deleting interface #6 wlan0, fe80::72f3:95ff:fe36:83df#123, interface stats: received=0, sent=0, dropped=0, active_time=54 secs
Jan 24 10:39:08 milan ntpd[1847]: peers refreshed
Jan 24 10:39:08 milan kernel: [ 284.251041] PM: Syncing filesystems ... done.
Jan 24 10:39:17 milan kernel: [ 284.408714] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jan 24 10:39:17 milan kernel: [ 284.419553] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jan 24 10:39:17 milan kernel: [ 284.430659] Suspending console(s) (use no_console_suspend to debug)
Jan 24 10:39:17 milan kernel: [ 284.431037] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jan 24 10:39:17 milan kernel: [ 284.431159] sd 0:0:0:0: [sda] Stopping disk
Jan 24 10:39:17 milan kernel: [ 284.487419] ehci_hcd 0000:00:1a.0: PCI INT A disabled
Jan 24 10:39:17 milan kernel: [ 284.487427] ehci_hcd 0000:00:1d.0: PCI INT A disabled
Jan 24 10:39:17 milan kernel: [ 284.577914] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Jan 24 10:39:17 milan kernel: [ 285.032523] PM: suspend of devices complete after 602.744 msecs
Jan 24 10:39:17 milan kernel: [ 285.052401] r8169 0000:01:00.0: wake-up capability enabled by ACPI
Jan 24 10:39:17 milan kernel: [ 285.085413] PM: late suspend of devices complete after 52.980 msecs
Jan 24 10:39:17 milan kernel: [ 285.085570] ACPI: Preparing to enter system sleep state S3
Jan 24 10:39:17 milan kernel: [ 285.131572] PM: Saving platform NVS memory
Jan 24 10:39:17 milan kernel: [ 285.134981] Disabling non-boot CPUs ...
Jan 24 10:39:17 milan kernel: [ 285.136847] CPU 1 is now offline
Jan 24 10:39:17 milan kernel: [ 285.139125] CPU 2 is now offline
Jan 24 10:39:17 milan kernel: [ 285.141034] CPU 3 is now offline
Jan 24 10:39:17 milan kernel: [ 285.141470] Extended CMOS year: 2000
Jan 24 10:39:17 milan kernel: [ 285.141678] ACPI: Low-level resume complete
Jan 24 10:39:17 milan kernel: [ 285.141735] PM: Restoring platform NVS memory
Jan 24 10:39:17 milan kernel: [ 285.142300] Extended CMOS year: 2000
Jan 24 10:39:17 milan kernel: [ 285.142525] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
Jan 24 10:39:17 milan kernel: [ 285.142532] Enabling non-boot CPUs ...
Jan 24 10:39:17 milan kernel: [ 285.142657] Booting Node 0 Processor 1 APIC 0x1
Jan 24 10:39:17 milan kernel: [ 285.153661] Calibrating delay loop (skipped) already calibrated this CPU
Jan 24 10:39:17 milan kernel: [ 285.173946] Switched to NOHz mode on CPU #1
Jan 24 10:39:17 milan kernel: [ 285.174002] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:39:17 milan kernel: [ 285.174261] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:39:17 milan kernel: [ 285.174266] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:39:17 milan kernel: [ 285.174272] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:39:17 milan kernel: [ 285.174276] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880150d998c0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:39:17 milan kernel: [ 285.174309] CPU1 is up
Jan 24 10:39:17 milan kernel: [ 285.174376] Booting Node 0 Processor 2 APIC 0x4
Jan 24 10:39:17 milan kernel: [ 285.185377] Calibrating delay loop (skipped) already calibrated this CPU
Jan 24 10:39:17 milan kernel: [ 285.205664] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:39:17 milan kernel: [ 285.205891] Switched to NOHz mode on CPU #2
Jan 24 10:39:17 milan kernel: [ 285.205926] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:39:17 milan kernel: [ 285.205931] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:39:17 milan kernel: [ 285.205937] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:39:17 milan kernel: [ 285.205941] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880150d99b18), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:39:17 milan kernel: [ 285.206136] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
Jan 24 10:39:17 milan kernel: [ 285.206146] CPU2 is up
Jan 24 10:39:17 milan kernel: [ 285.206214] Booting Node 0 Processor 3 APIC 0x5
Jan 24 10:39:17 milan kernel: [ 285.217215] Calibrating delay loop (skipped) already calibrated this CPU
Jan 24 10:39:17 milan kernel: [ 285.237533] NMI watchdog enabled, takes one hw-pmu counter.
Jan 24 10:39:17 milan kernel: [ 285.237809] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 24 10:39:17 milan kernel: [ 285.237815] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:39:17 milan kernel: [ 285.237820] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:39:17 milan kernel: [ 285.237824] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880150d99a78), AE_NOT_FOUND (20110623/psparse-536)
Jan 24 10:39:17 milan kernel: [ 285.237856] Switched to NOHz mode on CPU #3
Jan 24 10:39:17 milan kernel: [ 285.237881] CPU3 is up
Jan 24 10:39:17 milan kernel: [ 285.240107] ACPI: Waking up from system sleep state S3
Jan 24 10:39:17 milan kernel: [ 285.324124] PM: early resume of devices complete after 0.717 msecs
Jan 24 10:39:17 milan kernel: [ 285.324262] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 24 10:39:17 milan kernel: [ 285.324268] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jan 24 10:39:17 milan kernel: [ 285.324276] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jan 24 10:39:17 milan kernel: [ 285.324535] sd 0:0:0:0: [sda] Starting disk
Jan 24 10:39:17 milan kernel: [ 285.332690] r8169 0000:01:00.0: wake-up capability disabled by ACPI
Jan 24 10:39:17 milan kernel: [ 285.390513] Extended CMOS year: 2000
Jan 24 10:39:17 milan kernel: [ 285.472960] [drm:ironlake_update_pch_refclk] *ERROR* enabling SSC on PCH
Jan 24 10:39:17 milan kernel: [ 285.555507] usb 2-1.6: reset high speed USB device number 5 using ehci_hcd
Jan 24 10:39:17 milan kernel: [ 285.628258] ata5: SATA link down (SStatus 0 SControl 300)
Jan 24 10:39:17 milan kernel: [ 285.630215] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 24 10:39:17 milan kernel: [ 285.692126] ata2.00: configured for UDMA/100
Jan 24 10:39:17 milan kernel: [ 285.704241] usb 1-1.4: reset full speed USB device number 3 using ehci_hcd
Jan 24 10:39:17 milan kernel: [ 285.861991] usb 2-1.3: reset full speed USB device number 3 using ehci_hcd
Jan 24 10:39:17 milan kernel: [ 285.949086] btusb 2-1.3:1.0: no reset_resume for driver btusb?
Jan 24 10:39:17 milan kernel: [ 285.949091] btusb 2-1.3:1.1: no reset_resume for driver btusb?
Jan 24 10:39:17 milan kernel: [ 287.210477] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 24 10:39:17 milan kernel: [ 287.212586] ata1.00: configured for UDMA/100
Jan 24 10:39:17 milan kernel: [ 287.876753] PM: resume of devices complete after 2556.995 msecs
Jan 24 10:39:17 milan bluetoothd[986]: HCI dev 0 down
Jan 24 10:39:17 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 down
Jan 24 10:39:17 milan bluetoothd[986]: Adapter /org/bluez/986/hci0 has been disabled
Jan 24 10:39:17 milan bluetoothd[986]: HCI dev 0 unregistered
Jan 24 10:39:17 milan bluetoothd[986]: Stopping hci0 event socket
Jan 24 10:39:17 milan bluetoothd[986]: Unregister path: /org/bluez/986/hci0
Jan 24 10:39:17 milan kernel: [ 287.877295] Restarting tasks ... done.
Jan 24 10:39:17 milan kernel: [ 287.880902] video LNXVIDEO:00: Restoring backlight state
Jan 24 10:39:17 milan bluetoothd[986]: bluetoothd[986]: Adapter /org/bluez/986/hci0 has been disabled
Jan 24 10:39:17 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 unregistered
Jan 24 10:39:17 milan bluetoothd[986]: bluetoothd[986]: Stopping hci0 event socket
Jan 24 10:39:17 milan bluetoothd[986]: bluetoothd[986]: Unregister path: /org/bluez/986/hci0
Jan 24 10:39:17 milan bluetoothd[986]: HCI dev 0 registered
Jan 24 10:39:17 milan bluetoothd[986]: Listening for HCI events on hci0
Jan 24 10:39:17 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 registered
Jan 24 10:39:17 milan bluetoothd[986]: bluetoothd[986]: Listening for HCI events on hci0
Jan 24 10:39:18 milan systemd[1]: Service bluetooth.target is not needed anymore. Stopping.
Jan 24 10:39:18 milan dbus-daemon[1048]: dbus[1048]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.62" (uid=1000 pid=1612 comm="/usr/bin/gnome-shell ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.0" (uid=0 pid=986 comm="/usr/sbin/bluetoothd -n ")
Jan 24 10:39:18 milan dbus[1048]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.62" (uid=1000 pid=1612 comm="/usr/bin/gnome-shell ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.0" (uid=0 pid=986 comm="/usr/sbin/bluetoothd -n ")
Jan 24 10:39:18 milan NetworkManager[1039]: <info> wake requested (sleeping: yes enabled: yes)
Jan 24 10:39:18 milan NetworkManager[1039]: <info> waking up and re-enabling...
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (em1): now managed
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (em1): bringing up device.
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> wake requested (sleeping: yes enabled: yes)
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> waking up and re-enabling...
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): now managed
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): bringing up device.
Jan 24 10:39:18 milan kernel: [ 288.114565] r8169 0000:01:00.0: em1: link down
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (em1): preparing device.
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): preparing device.
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 24 10:39:18 milan kernel: [ 288.115045] ADDRCONF(NETDEV_UP): em1: link is not ready
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (wlan0): now managed
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): now managed
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 10:39:18 milan kernel: [ 288.163179] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 10:39:18 milan kernel: [ 288.163191] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (wlan0): preparing device.
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): preparing device.
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 10:39:18 milan kernel: [ 288.165302] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 10:39:18 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 10:39:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 10:39:18 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 24 10:39:18 milan dbus[1048]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 24 10:39:18 milan dbus-daemon[1048]: Launching FprintObject
Jan 24 10:39:18 milan dbus[1048]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 24 10:39:18 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 24 10:39:18 milan dbus-daemon[1048]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Jan 24 10:39:18 milan dbus-daemon[1048]: ** Message: entering main loop
Jan 24 10:39:19 milan kernel: [ 288.886571] Bluetooth: hci0 command tx timeout
Jan 24 10:39:19 milan bluetoothd[986]: HCI dev 0 up
Jan 24 10:39:19 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 up
Jan 24 10:39:19 milan bluetoothd[986]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
Jan 24 10:39:19 milan bluetoothd[986]: bluetoothd[986]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
Jan 24 10:39:19 milan bluetoothd[986]: Adapter /org/bluez/986/hci0 has been enabled
Jan 24 10:39:19 milan bluetoothd[986]: bluetoothd[986]: Adapter /org/bluez/986/hci0 has been enabled
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 10:39:19 milan NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 10:39:19 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 24 10:39:19 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 10:39:19 milan NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 10:39:19 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 10:39:19 milan NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 10:39:19 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 24 10:39:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 24 10:39:20 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 10:39:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 10:39:27 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 24 10:39:27 milan kernel: [ 297.319695] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 24 10:39:27 milan kernel: [ 297.319710] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 24 10:39:27 milan kernel: [ 297.319719] ieee80211 phy0: changing basic rates failed: -22
Jan 24 10:39:27 milan kernel: [ 297.319726] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Jan 24 10:39:27 milan kernel: [ 297.320667] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 24 10:39:27 milan kernel: [ 297.320775] cfg80211: Calling CRDA for country: FR
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 10:39:27 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 10:39:27 milan kernel: [ 297.331387] cfg80211: Regulatory domain changed to country: FR
Jan 24 10:39:27 milan kernel: [ 297.331390] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:39:27 milan kernel: [ 297.331392] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:39:27 milan kernel: [ 297.331394] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:39:27 milan kernel: [ 297.331396] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:39:27 milan kernel: [ 297.331398] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 10:39:27 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 24 10:39:27 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 24 10:39:27 milan NetworkManager[1039]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 24 10:39:27 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 24 10:39:27 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 24 10:39:27 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 24 10:39:27 milan NetworkManager[1039]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 24 10:39:27 milan NetworkManager[1039]: <info> dhclient started with pid 2607
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> dhclient started with pid 2607
Jan 24 10:39:27 milan NetworkManager[1039]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 24 10:39:27 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 24 10:39:27 milan dhclient[2607]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 24 10:39:27 milan dhclient[2607]: Copyright 2004-2012 Internet Systems Consortium.
Jan 24 10:39:27 milan dhclient[2607]: All rights reserved.
Jan 24 10:39:27 milan dhclient[2607]: For info, please visit https://www.isc.org/software/dhcp/
Jan 24 10:39:27 milan dhclient[2607]:
Jan 24 10:39:27 milan NetworkManager[1039]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 24 10:39:27 milan NetworkManager[1039]: Copyright 2004-2012 Internet Systems Consortium.
Jan 24 10:39:27 milan NetworkManager[1039]: All rights reserved.
Jan 24 10:39:27 milan NetworkManager[1039]: For info, please visit https://www.isc.org/software/dhcp/
Jan 24 10:39:27 milan NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 24 10:39:27 milan dhclient[2607]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:39:27 milan dhclient[2607]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:39:27 milan NetworkManager[1039]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:39:27 milan NetworkManager[1039]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 24 10:39:27 milan dhclient[2607]: Sending on Socket/fallback
Jan 24 10:39:27 milan NetworkManager[1039]: Sending on Socket/fallback
Jan 24 10:39:27 milan dhclient[2607]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 24 10:39:27 milan NetworkManager[1039]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 24 10:39:27 milan dhclient[2607]: DHCPACK from 10.92.72.1
Jan 24 10:39:27 milan NetworkManager[1039]: DHCPACK from 10.92.72.1
Jan 24 10:39:27 milan dhclient[2607]: bound to 10.92.72.73 -- renewal in 293052 seconds.
Jan 24 10:39:27 milan NetworkManager[1039]: bound to 10.92.72.73 -- renewal in 293052 seconds.
Jan 24 10:39:27 milan NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 24 10:39:27 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 24 10:39:27 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 24 10:39:27 milan NetworkManager[1039]: <info> address 10.92.72.73
Jan 24 10:39:27 milan NetworkManager[1039]: <info> prefix 23 (255.255.254.0)
Jan 24 10:39:27 milan NetworkManager[1039]: <info> gateway 10.92.72.1
Jan 24 10:39:27 milan NetworkManager[1039]: <info> nameserver '83.145.66.194'
Jan 24 10:39:27 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> address 10.92.72.73
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> prefix 23 (255.255.254.0)
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> gateway 10.92.72.1
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> nameserver '83.145.66.194'
Jan 24 10:39:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 24 10:39:28 milan avahi-daemon[1040]: Registering new address record for fe80::72f3:95ff:fe36:83df on wlan0.*.
Jan 24 10:39:30 milan ntpd[1847]: Listen normally on 8 wlan0 fe80::72f3:95ff:fe36:83df UDP 123
Jan 24 10:39:30 milan ntpd[1847]: peers refreshed
Jan 24 10:39:42 milan NetworkManager[1039]: ifcfg-rh: updating /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien
Jan 24 10:39:42 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: updating /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien
Jan 24 10:39:47 milan NetworkManager[1039]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 24 10:39:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 24 10:39:47 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 24 10:39:47 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 24 10:39:47 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 24 10:39:47 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 24 10:39:47 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 24 10:39:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 24 10:39:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 24 10:39:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 24 10:39:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 24 10:39:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 24 10:39:47 milan avahi-daemon[1040]: Joining mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 24 10:39:47 milan kernel: [ 317.630884] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 24 10:39:47 milan avahi-daemon[1040]: New relevant interface wlan0.IPv4 for mDNS.
Jan 24 10:39:47 milan avahi-daemon[1040]: Registering new address record for 10.92.72.73 on wlan0.IPv4.
Jan 24 10:39:48 milan NetworkManager[1039]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 24 10:39:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 24 10:39:48 milan NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:1A:A7:D2 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 24 10:39:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:1A:A7:D2 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 24 10:39:48 milan dbus-daemon[1048]: ** Message: No devices in use, exit
Jan 24 10:39:48 milan NetworkManager[1039]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 24 10:39:48 milan NetworkManager[1039]: <info> Activation (wlan0) successful, device activated.
Jan 24 10:39:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 24 10:39:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) successful, device activated.
Jan 24 10:39:48 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 24 10:39:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 24 10:39:49 milan ntpd[1847]: Listen normally on 9 wlan0 10.92.72.73 UDP 123
Jan 24 10:39:49 milan ntpd[1847]: peers refreshed
Jan 24 10:40:13 milan systemd[1]: PID file /run/sendmail.pid not readable (yet?) after start.
Jan 24 10:43:08 milan kernel: [ 518.283490] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:43:08 milan kernel: [ 518.283754] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:43:08 milan kernel: [ 518.284125] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:44:15 milan kernel: [ 584.463545] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:44:49 milan dbus[1048]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 24 10:44:49 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 24 10:44:49 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 24 10:44:49 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 24 10:45:15 milan kernel: [ 644.353005] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:46:46 milan kernel: [ 735.186771] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:47:55 milan kernel: [ 804.004652] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:49:29 milan systemd-tmpfiles[2832]: Successfully loaded SELinux database in 12ms 547us, size on heap is 481K.
Jan 24 10:52:12 milan kernel: [ 1061.517139] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:52:28 milan ntpd[1847]: 0.0.0.0 c612 02 freq_set kernel -206.795 PPM
Jan 24 10:52:28 milan ntpd[1847]: 0.0.0.0 c61c 0c clock_step -0.207885 s
Jan 24 10:52:28 milan ntpd[1847]: 0.0.0.0 c618 08 no_sys_peer
Jan 24 10:54:55 milan kernel: [ 1224.336449] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 10:58:51 milan kernel: [ 1459.193488] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 10:58:51 milan kernel: [ 1459.193502] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
Jan 24 10:58:51 milan kernel: [ 1459.193509] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
Jan 24 10:58:51 milan kernel: [ 1459.212960] cfg80211: Calling CRDA to update world regulatory domain
Jan 24 10:58:51 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 24 10:58:51 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 24 10:58:51 milan kernel: [ 1459.226598] cfg80211: World regulatory domain updated:
Jan 24 10:58:51 milan kernel: [ 1459.226603] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:58:51 milan kernel: [ 1459.226608] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:58:51 milan kernel: [ 1459.226613] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:58:51 milan kernel: [ 1459.226617] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:58:51 milan kernel: [ 1459.226621] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:58:51 milan kernel: [ 1459.226625] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 10:58:51 milan kernel: [ 1459.226643] cfg80211: Calling CRDA for country: FR
Jan 24 10:58:51 milan kernel: [ 1459.231720] cfg80211: Regulatory domain changed to country: FR
Jan 24 10:58:51 milan kernel: [ 1459.231725] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:58:51 milan kernel: [ 1459.231730] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:58:51 milan kernel: [ 1459.231734] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:58:51 milan kernel: [ 1459.231738] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:58:51 milan kernel: [ 1459.231741] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 10:58:51 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 10:58:51 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 10:58:52 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> associating
Jan 24 10:58:52 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> associating
Jan 24 10:58:52 milan kernel: [ 1460.232101] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 24 10:58:52 milan kernel: [ 1460.232110] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 24 10:58:52 milan kernel: [ 1460.232114] ieee80211 phy0: changing basic rates failed: -22
Jan 24 10:58:52 milan kernel: [ 1460.232117] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 24 10:58:52 milan kernel: [ 1460.232588] cfg80211: Calling CRDA for country: FR
Jan 24 10:58:52 milan kernel: [ 1460.236326] cfg80211: Regulatory domain changed to country: FR
Jan 24 10:58:52 milan kernel: [ 1460.236329] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 10:58:52 milan kernel: [ 1460.236332] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:58:52 milan kernel: [ 1460.236334] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:58:52 milan kernel: [ 1460.236337] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 10:58:52 milan kernel: [ 1460.236339] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 10:58:52 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 10:58:52 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 10:58:52 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 24 10:58:52 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 24 10:58:52 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 24 10:58:52 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 24 10:59:05 milan kernel: [ 1473.956688] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:00:11 milan kernel: [ 1539.878744] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:04:06 milan kernel: [ 1773.733003] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:04:39 milan kernel: [ 1807.451616] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:04:39 milan kernel: [ 1807.452305] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:06:37 milan kernel: [ 1925.322580] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 11:06:37 milan kernel: [ 1925.322595] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
Jan 24 11:06:37 milan kernel: [ 1925.322604] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
Jan 24 11:06:37 milan kernel: [ 1925.330206] cfg80211: Calling CRDA to update world regulatory domain
Jan 24 11:06:37 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 24 11:06:37 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 24 11:06:37 milan kernel: [ 1925.339504] cfg80211: World regulatory domain updated:
Jan 24 11:06:37 milan kernel: [ 1925.339510] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 11:06:37 milan kernel: [ 1925.339515] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:06:37 milan kernel: [ 1925.339520] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:06:37 milan kernel: [ 1925.339524] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:06:37 milan kernel: [ 1925.339528] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:06:37 milan kernel: [ 1925.339532] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:06:37 milan kernel: [ 1925.339550] cfg80211: Calling CRDA for country: FR
Jan 24 11:06:37 milan kernel: [ 1925.344609] cfg80211: Regulatory domain changed to country: FR
Jan 24 11:06:37 milan kernel: [ 1925.344614] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 11:06:37 milan kernel: [ 1925.344619] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:06:37 milan kernel: [ 1925.344624] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:06:37 milan kernel: [ 1925.344627] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:06:37 milan kernel: [ 1925.344631] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 11:06:37 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:06:37 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:06:38 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:06:38 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:06:42 milan NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:E9:27:72 (Ensae.Ancien) to (none) ((none))
Jan 24 11:06:42 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:E9:27:72 (Ensae.Ancien) to (none) ((none))
Jan 24 11:06:53 milan NetworkManager[1039]: <warn> (wlan0): link timed out.
Jan 24 11:06:53 milan NetworkManager[1039]: <info> (wlan0): device state change: activated -> disconnected (reason 'supplicant-timeout') [100 30 11]
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <warn> (wlan0): link timed out.
Jan 24 11:06:53 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'supplicant-timeout') [11]
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: activated -> disconnected (reason 'supplicant-timeout') [100 30 11]
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'supplicant-timeout') [11]
Jan 24 11:06:53 milan NetworkManager[1039]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 2607
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 2607
Jan 24 11:06:53 milan avahi-daemon[1040]: Withdrawing address record for 10.92.72.73 on wlan0.
Jan 24 11:06:53 milan avahi-daemon[1040]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 24 11:06:53 milan avahi-daemon[1040]: Interface wlan0.IPv4 no longer relevant for mDNS.
Jan 24 11:06:53 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:06:53 milan NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:06:53 milan dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:06:53 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 24 11:06:53 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:06:53 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 11:06:53 milan NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:06:53 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:06:53 milan NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:06:53 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:06:53 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 11:06:53 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 11:06:54 milan ntpd[1847]: Deleting interface #9 wlan0, 10.92.72.73#123, interface stats: received=103, sent=105, dropped=3, active_time=1626 secs
Jan 24 11:06:54 milan ntpd[1847]: 88.190.25.158 interface 10.92.72.73 -> (none)
Jan 24 11:06:54 milan ntpd[1847]: 91.121.52.147 interface 10.92.72.73 -> (none)
Jan 24 11:06:54 milan ntpd[1847]: 87.98.139.226 interface 10.92.72.73 -> (none)
Jan 24 11:06:54 milan ntpd[1847]: 88.191.130.213 interface 10.92.72.73 -> (none)
Jan 24 11:06:54 milan ntpd[1847]: peers refreshed
Jan 24 11:06:55 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:06:55 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:06:56 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:06:56 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:07:18 milan NetworkManager[1039]: <warn> Activation (wlan0/wireless): association took too long.
Jan 24 11:07:18 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:07:18 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0/wireless): association took too long.
Jan 24 11:07:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:07:18 milan NetworkManager[1039]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 24 11:07:18 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 24 11:07:18 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:07:18 milan NetworkManager[1039]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 24 11:07:18 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:07:18 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:07:20 milan NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:07:20 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:07:20 milan NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:07:20 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:07:21 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:07:21 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:07:22 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:07:22 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:07:38 milan NetworkManager[1039]: <info> WiFi now disabled by radio killswitch
Jan 24 11:07:38 milan NetworkManager[1039]: NetworkManager[1039]: <info> WiFi now disabled by radio killswitch
Jan 24 11:07:38 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> unavailable (reason 'none') [50 20 0]
Jan 24 11:07:38 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 24 11:07:38 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> unavailable (reason 'none') [50 20 0]
Jan 24 11:07:38 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 24 11:07:38 milan avahi-daemon[1040]: Withdrawing address record for fe80::72f3:95ff:fe36:83df on wlan0.
Jan 24 11:07:38 milan kernel: [ 1985.819658] usb 2-1.3: USB disconnect, device number 3
Jan 24 11:07:38 milan bluetoothd[986]: HCI dev 0 down
Jan 24 11:07:38 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 down
Jan 24 11:07:38 milan bluetoothd[986]: Adapter /org/bluez/986/hci0 has been disabled
Jan 24 11:07:38 milan bluetoothd[986]: bluetoothd[986]: Adapter /org/bluez/986/hci0 has been disabled
Jan 24 11:07:38 milan bluetoothd[986]: HCI dev 0 unregistered
Jan 24 11:07:38 milan bluetoothd[986]: Stopping hci0 event socket
Jan 24 11:07:38 milan bluetoothd[986]: Unregister path: /org/bluez/986/hci0
Jan 24 11:07:38 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 unregistered
Jan 24 11:07:38 milan bluetoothd[986]: bluetoothd[986]: Stopping hci0 event socket
Jan 24 11:07:38 milan bluetoothd[986]: bluetoothd[986]: Unregister path: /org/bluez/986/hci0
Jan 24 11:07:38 milan dbus[1048]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.62" (uid=1000 pid=1612 comm="/usr/bin/gnome-shell ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.0" (uid=0 pid=986 comm="/usr/sbin/bluetoothd -n ")
Jan 24 11:07:38 milan systemd[1]: Service bluetooth.target is not needed anymore. Stopping.
Jan 24 11:07:38 milan dbus-daemon[1048]: dbus[1048]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.62" (uid=1000 pid=1612 comm="/usr/bin/gnome-shell ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.0" (uid=0 pid=986 comm="/usr/sbin/bluetoothd -n ")
Jan 24 11:07:39 milan ntpd[1847]: Deleting interface #8 wlan0, fe80::72f3:95ff:fe36:83df#123, interface stats: received=0, sent=0, dropped=0, active_time=1690 secs
Jan 24 11:07:39 milan ntpd[1847]: peers refreshed
Jan 24 11:07:39 milan kernel: [ 1987.325318] usb 2-1.3: new full speed USB device number 6 using ehci_hcd
Jan 24 11:07:40 milan kernel: [ 1987.414820] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=21b4
Jan 24 11:07:40 milan kernel: [ 1987.414827] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 24 11:07:40 milan kernel: [ 1987.414832] usb 2-1.3: Product: Broadcom 2070 Bluetooth
Jan 24 11:07:40 milan kernel: [ 1987.414835] usb 2-1.3: Manufacturer: Broadcom Corp
Jan 24 11:07:40 milan kernel: [ 1987.414838] usb 2-1.3: SerialNumber: 002713DDD4FC
Jan 24 11:07:40 milan bluetoothd[986]: HCI dev 0 registered
Jan 24 11:07:40 milan bluetoothd[986]: Listening for HCI events on hci0
Jan 24 11:07:40 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 registered
Jan 24 11:07:40 milan bluetoothd[986]: bluetoothd[986]: Listening for HCI events on hci0
Jan 24 11:07:40 milan bluetoothd[986]: HCI dev 0 up
Jan 24 11:07:40 milan bluetoothd[986]: bluetoothd[986]: HCI dev 0 up
Jan 24 11:07:40 milan bluetoothd[986]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
Jan 24 11:07:40 milan bluetoothd[986]: bluetoothd[986]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
Jan 24 11:07:40 milan bluetoothd[986]: Adapter /org/bluez/986/hci0 has been enabled
Jan 24 11:07:40 milan bluetoothd[986]: bluetoothd[986]: Adapter /org/bluez/986/hci0 has been enabled
Jan 24 11:07:43 milan NetworkManager[1039]: <info> WiFi now enabled by radio killswitch
Jan 24 11:07:43 milan NetworkManager[1039]: NetworkManager[1039]: <info> WiFi now enabled by radio killswitch
Jan 24 11:07:43 milan NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 11:07:43 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 11:07:43 milan kernel: [ 1990.683075] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 11:07:43 milan kernel: [ 1990.683089] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
Jan 24 11:07:43 milan kernel: [ 1990.685528] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 24 11:07:43 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 11:07:43 milan NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 11:07:43 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 11:07:43 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 11:07:43 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 11:07:43 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:07:45 milan NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:07:45 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:07:45 milan NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:07:45 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 24 11:07:45 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:07:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:08:10 milan NetworkManager[1039]: <warn> Activation (wlan0/wireless): association took too long.
Jan 24 11:08:10 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0/wireless): association took too long.
Jan 24 11:08:10 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:08:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:08:10 milan NetworkManager[1039]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 24 11:08:10 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 24 11:08:10 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:08:10 milan NetworkManager[1039]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 24 11:08:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:08:10 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 24 11:08:16 milan NetworkManager[1039]: <warn> No agents were available for this request.
Jan 24 11:08:16 milan NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 24 11:08:16 milan NetworkManager[1039]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 24 11:08:16 milan NetworkManager[1039]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 24 11:08:16 milan NetworkManager[1039]: NetworkManager[1039]: <warn> No agents were available for this request.
Jan 24 11:08:16 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 24 11:08:16 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 24 11:08:16 milan NetworkManager[1039]: NetworkManager[1039]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 24 11:08:16 milan NetworkManager[1039]: <warn> Activation (wlan0) failed.
Jan 24 11:08:16 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0) failed.
Jan 24 11:08:16 milan NetworkManager[1039]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 24 11:08:16 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 24 11:08:16 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 24 11:08:16 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:08:19 milan NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:08:19 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:08:19 milan NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:08:19 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:08:19 milan avahi-daemon[1040]: Withdrawing workstation service for wlan0.
Jan 24 11:08:19 milan NetworkManager[1039]: <info> (wlan0): now unmanaged
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): now unmanaged
Jan 24 11:08:19 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> unmanaged (reason 'removed') [50 10 36]
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> unmanaged (reason 'removed') [50 10 36]
Jan 24 11:08:19 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'removed') [36]
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'removed') [36]
Jan 24 11:08:19 milan NetworkManager[1039]: <warn> (3) failed to find interface name for index
Jan 24 11:08:19 milan NetworkManager[1039]: nm_system_iface_flush_routes: assertion `iface != NULL' failed
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <warn> (3) failed to find interface name for index
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: nm_system_iface_flush_routes: assertion `iface != NULL' failed
Jan 24 11:08:19 milan NetworkManager[1039]: <warn> (3) failed to find interface name for index
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <warn> (3) failed to find interface name for index
Jan 24 11:08:19 milan NetworkManager[1039]: <info> (wlan0): cleaning up...
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): cleaning up...
Jan 24 11:08:19 milan NetworkManager[1039]: <warn> (3) failed to find interface name for index
Jan 24 11:08:19 milan NetworkManager[1039]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <warn> (3) failed to find interface name for index
Jan 24 11:08:19 milan NetworkManager[1039]: <error> [1327399699.705006] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <error> [1327399699.705006] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 24 11:08:19 milan NetworkManager[1039]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy0/rfkill1 disappeared
Jan 24 11:08:19 milan NetworkManager[1039]: NetworkManager[1039]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy0/rfkill1 disappeared
Jan 24 11:08:25 milan kernel: [ 2032.350193] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
Jan 24 11:08:25 milan kernel: [ 2032.365648] cfg80211: Calling CRDA for country: US
Jan 24 11:08:25 milan kernel: [ 2032.365691] brcms_module_init: register returned 0
Jan 24 11:08:25 milan kernel: [ 2032.373428] cfg80211: Current regulatory domain intersected:
Jan 24 11:08:25 milan kernel: [ 2032.373431] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 11:08:25 milan kernel: [ 2032.373434] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:08:25 milan kernel: [ 2032.373437] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1700 mBm)
Jan 24 11:08:25 milan kernel: [ 2032.373440] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:08:25 milan kernel: [ 2032.373443] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:08:25 milan kernel: [ 2032.373446] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:08:25 milan NetworkManager[1039]: <info> found WiFi radio killswitch rfkill7 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy1/rfkill7) (driver (unknown))
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> found WiFi radio killswitch rfkill7 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy1/rfkill7) (driver (unknown))
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 4)
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): now managed
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 4)
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): now managed
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 11:08:25 milan kernel: [ 2032.460212] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 11:08:25 milan kernel: [ 2032.460226] ieee80211 phy1: brcms_ops_config: change power-save mode: false (implement)
Jan 24 11:08:25 milan kernel: [ 2032.461077] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): preparing device.
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): preparing device.
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 11:08:25 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 11:08:25 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:08:26 milan NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:08:26 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:08:26 milan NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:08:26 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 24 11:08:26 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 24 11:08:27 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:08:27 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:08:28 milan kernel: [ 2035.521072] cfg80211: Calling CRDA to update world regulatory domain
Jan 24 11:08:28 milan kernel: [ 2035.526816] cfg80211: World regulatory domain updated:
Jan 24 11:08:28 milan kernel: [ 2035.526821] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 11:08:28 milan kernel: [ 2035.526826] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:08:28 milan kernel: [ 2035.526831] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:08:28 milan kernel: [ 2035.526835] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:08:28 milan kernel: [ 2035.526839] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:08:28 milan kernel: [ 2035.526843] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:08:33 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 24 11:08:33 milan kernel: [ 2040.867250] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 24 11:08:33 milan kernel: [ 2040.867261] ieee80211 phy1: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 24 11:08:33 milan kernel: [ 2040.867267] ieee80211 phy1: changing basic rates failed: -22
Jan 24 11:08:33 milan kernel: [ 2040.867272] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Jan 24 11:08:33 milan kernel: [ 2040.867994] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 24 11:08:33 milan kernel: [ 2040.868097] cfg80211: Calling CRDA for country: FR
Jan 24 11:08:33 milan kernel: [ 2040.873079] cfg80211: Regulatory domain changed to country: FR
Jan 24 11:08:33 milan kernel: [ 2040.873084] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 11:08:33 milan kernel: [ 2040.873089] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:08:33 milan kernel: [ 2040.873093] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:08:33 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 11:08:33 milan kernel: [ 2040.873097] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:08:33 milan kernel: [ 2040.873101] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 11:08:33 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 24 11:08:33 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 24 11:08:33 milan NetworkManager[1039]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 24 11:08:33 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 24 11:08:33 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 24 11:08:33 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 24 11:08:33 milan NetworkManager[1039]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 24 11:08:33 milan NetworkManager[1039]: <info> dhclient started with pid 3259
Jan 24 11:08:33 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> dhclient started with pid 3259
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 24 11:08:33 milan dhclient[3259]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 24 11:08:33 milan dhclient[3259]: Copyright 2004-2012 Internet Systems Consortium.
Jan 24 11:08:33 milan dhclient[3259]: All rights reserved.
Jan 24 11:08:33 milan dhclient[3259]: For info, please visit https://www.isc.org/software/dhcp/
Jan 24 11:08:33 milan dhclient[3259]:
Jan 24 11:08:33 milan NetworkManager[1039]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 24 11:08:33 milan NetworkManager[1039]: Copyright 2004-2012 Internet Systems Consortium.
Jan 24 11:08:33 milan NetworkManager[1039]: All rights reserved.
Jan 24 11:08:33 milan NetworkManager[1039]: For info, please visit https://www.isc.org/software/dhcp/
Jan 24 11:08:33 milan NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 24 11:08:33 milan dhclient[3259]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 24 11:08:33 milan dhclient[3259]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 24 11:08:33 milan NetworkManager[1039]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 24 11:08:33 milan NetworkManager[1039]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 24 11:08:33 milan dhclient[3259]: Sending on Socket/fallback
Jan 24 11:08:33 milan NetworkManager[1039]: Sending on Socket/fallback
Jan 24 11:08:33 milan dhclient[3259]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 24 11:08:33 milan NetworkManager[1039]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 24 11:08:33 milan dhclient[3259]: DHCPACK from 10.92.72.1
Jan 24 11:08:33 milan NetworkManager[1039]: DHCPACK from 10.92.72.1
Jan 24 11:08:33 milan dhclient[3259]: bound to 10.92.72.73 -- renewal in 285704 seconds.
Jan 24 11:08:33 milan NetworkManager[1039]: bound to 10.92.72.73 -- renewal in 285704 seconds.
Jan 24 11:08:33 milan NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 24 11:08:33 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 24 11:08:33 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 24 11:08:33 milan NetworkManager[1039]: <info> address 10.92.72.73
Jan 24 11:08:33 milan NetworkManager[1039]: <info> prefix 23 (255.255.254.0)
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> address 10.92.72.73
Jan 24 11:08:33 milan NetworkManager[1039]: <info> gateway 10.92.72.1
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> prefix 23 (255.255.254.0)
Jan 24 11:08:33 milan NetworkManager[1039]: <info> nameserver '83.145.66.194'
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> gateway 10.92.72.1
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> nameserver '83.145.66.194'
Jan 24 11:08:33 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 24 11:08:33 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 24 11:08:33 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 24 11:08:33 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 24 11:08:33 milan avahi-daemon[1040]: Joining mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 24 11:08:33 milan kernel: [ 2041.155686] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 24 11:08:33 milan avahi-daemon[1040]: New relevant interface wlan0.IPv4 for mDNS.
Jan 24 11:08:33 milan avahi-daemon[1040]: Registering new address record for 10.92.72.73 on wlan0.IPv4.
Jan 24 11:08:34 milan NetworkManager[1039]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 24 11:08:34 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 24 11:08:34 milan NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:1A:A7:D2 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 24 11:08:34 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:1A:A7:D2 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 24 11:08:34 milan NetworkManager[1039]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 24 11:08:34 milan NetworkManager[1039]: <info> Activation (wlan0) successful, device activated.
Jan 24 11:08:34 milan NetworkManager[1039]: NetworkManager[1039]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 24 11:08:34 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) successful, device activated.
Jan 24 11:08:34 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 24 11:08:34 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 24 11:08:34 milan dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 11:08:34 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 11:08:34 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 11:08:34 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 11:08:35 milan systemd[1]: iscsi.service: control process exited, code=exited status=3
Jan 24 11:08:35 milan systemd[1]: Unit iscsi.service entered failed state.
Jan 24 11:08:35 milan dbus-daemon[1048]: Starting iscsi (via systemctl): Job failed. See system logs and 'systemctl status' for details.
Jan 24 11:08:35 milan dbus-daemon[1048]: [FAILED]
Jan 24 11:08:35 milan nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/04-iscsi' exited with error status 1.
Jan 24 11:08:35 milan avahi-daemon[1040]: Registering new address record for fe80::72f3:95ff:fe36:83df on wlan0.*.
Jan 24 11:08:35 milan kernel: [ 2042.713161] device fsid be8d8291-3821-4584-a9a7-776b91d4d5a5 devid 1 transid 59746 /dev/sda5
Jan 24 11:08:35 milan kernel: [ 2043.108596] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
Jan 24 11:08:35 milan kernel: [ 2043.109198] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Jan 24 11:08:35 milan dbus-daemon[1048]: Mounting other filesystems: [ OK ]
Jan 24 11:08:36 milan ntpd[1847]: Listen normally on 10 wlan0 10.92.72.73 UDP 123
Jan 24 11:08:36 milan ntpd[1847]: Listen normally on 11 wlan0 fe80::72f3:95ff:fe36:83df UDP 123
Jan 24 11:08:36 milan ntpd[1847]: peers refreshed
Jan 24 11:08:36 milan kernel: [ 2044.130151] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Jan 24 11:08:37 milan ntpd[1847]: 0.0.0.0 c628 08 no_sys_peer
Jan 24 11:08:48 milan kernel: [ 2055.298569] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 11:08:48 milan kernel: [ 2055.298583] ieee80211 phy1: brcmsmac: brcms_ops_bss_info_changed: disassociated
Jan 24 11:08:48 milan kernel: [ 2055.298590] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
Jan 24 11:08:48 milan kernel: [ 2055.323026] cfg80211: Calling CRDA to update world regulatory domain
Jan 24 11:08:48 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 24 11:08:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 24 11:08:48 milan kernel: [ 2055.333639] cfg80211: World regulatory domain updated:
Jan 24 11:08:48 milan kernel: [ 2055.333644] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 11:08:48 milan kernel: [ 2055.333649] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:08:48 milan kernel: [ 2055.333654] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:08:48 milan kernel: [ 2055.333658] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:08:48 milan kernel: [ 2055.333662] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:08:48 milan kernel: [ 2055.333666] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:08:48 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:08:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:08:48 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:08:48 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:08:49 milan NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:E9:27:72 (Ensae.Ancien) to (none) ((none))
Jan 24 11:08:49 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): roamed from BSSID 00:09:0F:E9:27:72 (Ensae.Ancien) to (none) ((none))
Jan 24 11:09:03 milan NetworkManager[1039]: <warn> (wlan0): link timed out.
Jan 24 11:09:03 milan NetworkManager[1039]: <info> (wlan0): device state change: activated -> disconnected (reason 'supplicant-timeout') [100 30 11]
Jan 24 11:09:03 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'supplicant-timeout') [11]
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <warn> (wlan0): link timed out.
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: activated -> disconnected (reason 'supplicant-timeout') [100 30 11]
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'supplicant-timeout') [11]
Jan 24 11:09:03 milan NetworkManager[1039]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 3259
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 3259
Jan 24 11:09:03 milan avahi-daemon[1040]: Withdrawing address record for 10.92.72.73 on wlan0.
Jan 24 11:09:03 milan avahi-daemon[1040]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 24 11:09:03 milan avahi-daemon[1040]: Interface wlan0.IPv4 no longer relevant for mDNS.
Jan 24 11:09:03 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:09:03 milan NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:09:03 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 24 11:09:03 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 11:09:03 milan NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:09:03 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:09:03 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:09:03 milan NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:09:04 milan ntpd[1847]: Deleting interface #10 wlan0, 10.92.72.73#123, interface stats: received=2, sent=5, dropped=0, active_time=28 secs
Jan 24 11:09:04 milan ntpd[1847]: 88.190.25.158 interface 10.92.72.73 -> (none)
Jan 24 11:09:04 milan ntpd[1847]: 91.121.52.147 interface 10.92.72.73 -> (none)
Jan 24 11:09:04 milan ntpd[1847]: 87.98.139.226 interface 10.92.72.73 -> (none)
Jan 24 11:09:04 milan ntpd[1847]: 88.191.130.213 interface 10.92.72.73 -> (none)
Jan 24 11:09:04 milan ntpd[1847]: peers refreshed
Jan 24 11:09:07 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:09:07 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:09:07 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:09:07 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:09:28 milan NetworkManager[1039]: <warn> Activation (wlan0/wireless): association took too long.
Jan 24 11:09:28 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:09:28 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0/wireless): association took too long.
Jan 24 11:09:28 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:09:28 milan NetworkManager[1039]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 24 11:09:28 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:09:28 milan NetworkManager[1039]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 24 11:09:28 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 24 11:09:28 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:09:28 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 24 11:09:30 milan NetworkManager[1039]: <warn> No agents were available for this request.
Jan 24 11:09:30 milan NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 24 11:09:30 milan NetworkManager[1039]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 24 11:09:30 milan NetworkManager[1039]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 24 11:09:30 milan NetworkManager[1039]: <warn> Activation (wlan0) failed.
Jan 24 11:09:30 milan NetworkManager[1039]: NetworkManager[1039]: <warn> No agents were available for this request.
Jan 24 11:09:30 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 24 11:09:30 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 24 11:09:30 milan NetworkManager[1039]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 24 11:09:30 milan NetworkManager[1039]: NetworkManager[1039]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 24 11:09:30 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0) failed.
Jan 24 11:09:30 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 24 11:09:30 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 24 11:09:30 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 24 11:09:35 milan systemd[1]: PID file /run/sendmail.pid not readable (yet?) after start.
Jan 24 11:10:08 milan avahi-daemon[1040]: Withdrawing address record for fe80::72f3:95ff:fe36:83df on wlan0.
Jan 24 11:10:08 milan avahi-daemon[1040]: Withdrawing workstation service for wlan0.
Jan 24 11:10:08 milan NetworkManager[1039]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy1/rfkill7 disappeared
Jan 24 11:10:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy1/rfkill7 disappeared
Jan 24 11:10:08 milan NetworkManager[1039]: <info> (wlan0): now unmanaged
Jan 24 11:10:08 milan NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> unmanaged (reason 'removed') [30 10 36]
Jan 24 11:10:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): now unmanaged
Jan 24 11:10:08 milan NetworkManager[1039]: <info> (wlan0): cleaning up...
Jan 24 11:10:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> unmanaged (reason 'removed') [30 10 36]
Jan 24 11:10:08 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): cleaning up...
Jan 24 11:10:08 milan NetworkManager[1039]: <warn> (4) failed to find interface name for index
Jan 24 11:10:08 milan NetworkManager[1039]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 24 11:10:08 milan NetworkManager[1039]: <error> [1327399808.706575] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 24 11:10:08 milan NetworkManager[1039]: NetworkManager[1039]: <warn> (4) failed to find interface name for index
Jan 24 11:10:08 milan NetworkManager[1039]: NetworkManager[1039]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 24 11:10:08 milan NetworkManager[1039]: NetworkManager[1039]: <error> [1327399808.706575] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 24 11:10:09 milan ntpd[1847]: Deleting interface #11 wlan0, fe80::72f3:95ff:fe36:83df#123, interface stats: received=0, sent=0, dropped=0, active_time=93 secs
Jan 24 11:10:09 milan ntpd[1847]: peers refreshed
Jan 24 11:10:14 milan kernel: [ 2142.011705] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
Jan 24 11:10:14 milan kernel: [ 2142.027103] brcms_module_init: register returned 0
Jan 24 11:10:14 milan kernel: [ 2142.028332] cfg80211: Calling CRDA for country: US
Jan 24 11:10:14 milan kernel: [ 2142.034037] cfg80211: Regulatory domain changed to country: US
Jan 24 11:10:14 milan kernel: [ 2142.034040] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 11:10:14 milan kernel: [ 2142.034042] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 24 11:10:14 milan kernel: [ 2142.034044] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 24 11:10:14 milan kernel: [ 2142.034046] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:10:14 milan kernel: [ 2142.034048] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:10:14 milan kernel: [ 2142.034050] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 24 11:10:14 milan kernel: [ 2142.034051] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 24 11:10:14 milan kernel: [ 2142.039747] cfg80211: Calling CRDA for country: FR
Jan 24 11:10:14 milan kernel: [ 2142.044480] cfg80211: Regulatory domain changed to country: FR
Jan 24 11:10:14 milan kernel: [ 2142.044482] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 11:10:14 milan kernel: [ 2142.044485] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:10:14 milan kernel: [ 2142.044487] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:10:14 milan kernel: [ 2142.044488] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:10:14 milan kernel: [ 2142.044490] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 5)
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/3
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): now managed
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 5)
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/3
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): now managed
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): bringing up device.
Jan 24 11:10:14 milan kernel: [ 2142.088808] ieee80211 phy2: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 24 11:10:14 milan kernel: [ 2142.088818] ieee80211 phy2: brcms_ops_config: change power-save mode: false (implement)
Jan 24 11:10:14 milan kernel: [ 2142.089285] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): preparing device.
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): preparing device.
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 24 11:10:14 milan NetworkManager[1039]: <info> found WiFi radio killswitch rfkill8 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy2/rfkill8) (driver (unknown))
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> found WiFi radio killswitch rfkill8 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy2/rfkill8) (driver (unknown))
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 24 11:10:14 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 11:10:14 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 24 11:10:49 milan NetworkManager[1039]: ifcfg-rh: removed /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien.
Jan 24 11:10:49 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: removed /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien.
Jan 24 11:10:49 milan NetworkManager[1039]: ifcfg-rh: removed /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien.
Jan 24 11:10:49 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: removed /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien.
Jan 24 11:11:04 milan NetworkManager[1039]: ifcfg-rh: read connection 'Auto Ensae.Ancien'
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: read connection 'Auto Ensae.Ancien'
Jan 24 11:11:04 milan NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:11:04 milan NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 24 11:11:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:11:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:11:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:11:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:11:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:11:04 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:11:04 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 24 11:11:04 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:11:04 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:11:04 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:11:05 milan NetworkManager[1039]: ifcfg-rh: updating /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien
Jan 24 11:11:05 milan NetworkManager[1039]: NetworkManager[1039]: ifcfg-rh: updating /etc/sysconfig/network-scripts/ifcfg-Auto_Ensae.Ancien
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:11:09 milan NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:11:09 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:11:09 milan NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:11:09 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 24 11:11:09 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 24 11:11:10 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:11:10 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 24 11:11:34 milan NetworkManager[1039]: <warn> Activation (wlan0/wireless): association took too long.
Jan 24 11:11:34 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:11:34 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0/wireless): association took too long.
Jan 24 11:11:34 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 24 11:11:34 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 24 11:11:34 milan NetworkManager[1039]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 24 11:11:34 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:11:34 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 24 11:11:34 milan NetworkManager[1039]: NetworkManager[1039]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 24 11:11:34 milan NetworkManager[1039]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:11:44 milan NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:11:44 milan NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'scan_ssid' value '1'
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Config: added 'psk' value '<omitted>'
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: added 'proto' value 'WPA RSN'
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 24 11:11:44 milan NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> Config: set interface ap_scan to 1
Jan 24 11:11:44 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:11:44 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 24 11:11:45 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> associating
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: scanning -> associating
Jan 24 11:11:45 milan kernel: [ 2232.502948] ieee80211 phy2: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 24 11:11:45 milan kernel: [ 2232.502956] ieee80211 phy2: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 24 11:11:45 milan kernel: [ 2232.502961] ieee80211 phy2: changing basic rates failed: -22
Jan 24 11:11:45 milan kernel: [ 2232.502965] ieee80211 phy2: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Jan 24 11:11:45 milan kernel: [ 2232.503591] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 24 11:11:45 milan kernel: [ 2232.503748] cfg80211: Calling CRDA for country: FR
Jan 24 11:11:45 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 24 11:11:45 milan kernel: [ 2232.511942] cfg80211: Regulatory domain changed to country: FR
Jan 24 11:11:45 milan kernel: [ 2232.511947] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 24 11:11:45 milan kernel: [ 2232.511952] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:11:45 milan kernel: [ 2232.511956] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:11:45 milan kernel: [ 2232.511960] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 24 11:11:45 milan kernel: [ 2232.511964] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 24 11:11:45 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 24 11:11:45 milan NetworkManager[1039]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 24 11:11:45 milan NetworkManager[1039]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 24 11:11:45 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 24 11:11:45 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 24 11:11:45 milan NetworkManager[1039]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 24 11:11:45 milan NetworkManager[1039]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 24 11:11:45 milan NetworkManager[1039]: <info> dhclient started with pid 3534
Jan 24 11:11:45 milan NetworkManager[1039]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> dhclient started with pid 3534
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 24 11:11:45 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 24 11:11:45 milan dhclient[3534]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 24 11:11:45 milan dhclient[3534]: Copyright 2004-2012 Internet Systems Consortium.
Jan 24 11:11:45 milan dhclient[3534]: All rights reserved.
Jan 24 11:11:45 milan dhclient[3534]: For info, please visit https://www.isc.org/software/dhcp/
Jan 24 11:11:45 milan dhclient[3534]:
Jan 24 11:11:45 milan NetworkManager[1039]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 24 11:11:45 milan NetworkManager[1039]: Copyright 2004-2012 Internet Systems Consortium.
Jan 24 11:11:45 milan NetworkManager[1039]: All rights reserved.
Jan 24 11:11:45 milan NetworkManager[1039]: For info, please visit https://www.isc.org/software/dhcp/
Jan 24 11:11:45 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 24 11:11:45 milan NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 24 11:11:45 milan dhclient[3534]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 24 11:11:45 milan dhclient[3534]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 24 11:11:45 milan NetworkManager[1039]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 24 11:11:45 milan dhclient[3534]: Sending on Socket/fallback
Jan 24 11:11:45 milan NetworkManager[1039]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 24 11:11:45 milan NetworkManager[1039]: Sending on Socket/fallback
Jan 24 11:11:45 milan dhclient[3534]: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
Jan 24 11:11:45 milan NetworkManager[1039]: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
Jan 24 11:11:47 milan avahi-daemon[1040]: Registering new address record for fe80::72f3:95ff:fe36:83df on wlan0.*.
Jan 24 11:11:47 milan dhclient[3534]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 24 11:11:47 milan NetworkManager[1039]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 24 11:11:47 milan dhclient[3534]: DHCPOFFER from 10.92.72.1
Jan 24 11:11:47 milan NetworkManager[1039]: DHCPOFFER from 10.92.72.1
Jan 24 11:11:47 milan dhclient[3534]: DHCPACK from 10.92.72.1
Jan 24 11:11:47 milan NetworkManager[1039]: DHCPACK from 10.92.72.1
Jan 24 11:11:47 milan dhclient[3534]: bound to 10.92.72.73 -- renewal in 233796 seconds.
Jan 24 11:11:47 milan NetworkManager[1039]: bound to 10.92.72.73 -- renewal in 233796 seconds.
Jan 24 11:11:47 milan NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed preinit -> bound
Jan 24 11:11:47 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 24 11:11:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): DHCPv4 state changed preinit -> bound
Jan 24 11:11:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 24 11:11:47 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 24 11:11:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 24 11:11:47 milan NetworkManager[1039]: <info> address 10.92.72.73
Jan 24 11:11:47 milan NetworkManager[1039]: <info> prefix 23 (255.255.254.0)
Jan 24 11:11:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> address 10.92.72.73
Jan 24 11:11:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> prefix 23 (255.255.254.0)
Jan 24 11:11:47 milan NetworkManager[1039]: <info> gateway 10.92.72.1
Jan 24 11:11:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> gateway 10.92.72.1
Jan 24 11:11:47 milan NetworkManager[1039]: <info> nameserver '83.145.66.194'
Jan 24 11:11:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> nameserver '83.145.66.194'
Jan 24 11:11:47 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 24 11:11:47 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 24 11:11:48 milan ntpd[1847]: Listen normally on 12 wlan0 fe80::72f3:95ff:fe36:83df UDP 123
Jan 24 11:11:48 milan ntpd[1847]: peers refreshed
Jan 24 11:12:05 milan NetworkManager[1039]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 24 11:12:05 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 24 11:12:05 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 24 11:12:05 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 24 11:12:05 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 24 11:12:05 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 24 11:12:05 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 24 11:12:05 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 24 11:12:05 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 24 11:12:05 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 24 11:12:05 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 24 11:12:05 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 24 11:12:05 milan kernel: [ 2252.529574] ieee80211 phy2: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 24 11:12:05 milan avahi-daemon[1040]: Joining mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 24 11:12:05 milan avahi-daemon[1040]: New relevant interface wlan0.IPv4 for mDNS.
Jan 24 11:12:05 milan avahi-daemon[1040]: Registering new address record for 10.92.72.73 on wlan0.IPv4.
Jan 24 11:12:06 milan NetworkManager[1039]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 24 11:12:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 24 11:12:06 milan NetworkManager[1039]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 24 11:12:06 milan NetworkManager[1039]: <info> Activation (wlan0) successful, device activated.
Jan 24 11:12:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 24 11:12:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) successful, device activated.
Jan 24 11:12:06 milan NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 24 11:12:06 milan NetworkManager[1039]: NetworkManager[1039]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 24 11:12:06 milan dbus-daemon[1048]: dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 11:12:06 milan dbus[1048]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 24 11:12:06 milan dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 11:12:06 milan dbus-daemon[1048]: dbus[1048]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 24 11:12:06 milan systemd[1]: iscsi.service: control process exited, code=exited status=3
Jan 24 11:12:06 milan systemd[1]: Unit iscsi.service entered failed state.
Jan 24 11:12:06 milan dbus-daemon[1048]: Starting iscsi (via systemctl): Job failed. See system logs and 'systemctl status' for details.
Jan 24 11:12:06 milan dbus-daemon[1048]: [FAILED]
Jan 24 11:12:06 milan nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/04-iscsi' exited with error status 1.
Jan 24 11:12:06 milan ntpd[1847]: Listen normally on 13 wlan0 10.92.72.73 UDP 123
Jan 24 11:12:06 milan ntpd[1847]: peers refreshed
Jan 24 11:12:06 milan dbus-daemon[1048]: Mounting other filesystems: [ OK ]
Jan 24 11:12:13 milan ntpd[1847]: 0.0.0.0 c612 02 freq_set kernel 12.960 PPM
Jan 24 11:12:13 milan ntpd[1847]: 0.0.0.0 c61c 0c clock_step +0.260630 s
Jan 24 11:12:14 milan ntpd[1847]: 0.0.0.0 c615 05 clock_sync
Jan 24 11:12:15 milan ntpd[1847]: 0.0.0.0 c618 08 no_sys_peer
Jan 24 11:13:23 milan kernel: [ 2329.667284] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:14:05 milan kernel: [ 2372.325786] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:14:05 milan kernel: [ 2372.326793] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:14:05 milan kernel: [ 2372.327578] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:14:13 milan kernel: [ 2379.781174] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:21:41 milan kernel: [ 2827.121531] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:21:41 milan kernel: [ 2827.122003] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:22:08 milan kernel: [ 2853.753418] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:22:12 milan kernel: [ 2857.755344] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:22:12 milan kernel: [ 2857.756286] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:22:12 milan kernel: [ 2857.756935] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:23:18 milan kernel: [ 2923.632459] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:23:18 milan kernel: [ 2923.632766] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 24 11:23:18 milan kernel: [ 2923.633038] ieee80211 phy2: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #4: lspci.log --]
[-- Type: text/x-log; name=lspci.log, Size: 7087 bytes --]
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0, IRQ 41
Memory at b0000000 (64-bit, non-prefetchable) [size=4M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 3050 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at b4406100 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at b4405c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at b4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: b3400000-b43fffff
Prefetchable memory behind bridge: 00000000b0400000-00000000b13fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: b2400000-b33fffff
Prefetchable memory behind bridge: 00000000b1400000-00000000b23fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at b4405800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 40
I/O ports at 3048 [size=8]
I/O ports at 305c [size=4]
I/O ports at 3040 [size=8]
I/O ports at 3058 [size=4]
I/O ports at 3020 [size=32]
Memory at b4405000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: medium devsel, IRQ 19
Memory at b4406000 (64-bit, non-prefetchable) [size=256]
I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at b4404000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
Kernel modules: intel_ips
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0, IRQ 42
I/O ports at 2000 [size=256]
Memory at b0404000 (64-bit, prefetchable) [size=4K]
Memory at b0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1483]
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at b2400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcmsmac
Kernel modules: brcmsmac
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:146a]
Flags: bus master, fast devsel, latency 0
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
2012-01-24 10:31 BCM4313 keeps disconnecting with brcmsmac and multiple APs Milan Bouchet-Valat
@ 2012-01-27 8:46 ` Arend van Spriel
2012-01-27 10:19 ` Felix Fietkau
2012-01-27 10:08 ` Arend van Spriel
1 sibling, 1 reply; 11+ messages in thread
From: Arend van Spriel @ 2012-01-27 8:46 UTC (permalink / raw)
To: Felix Fietkau; +Cc: Milan Bouchet-Valat, linux-wireless, Johannes Berg
On 01/24/2012 11:31 AM, Milan Bouchet-Valat wrote:
> [ 297.365453] wlan0: Wrong control channel in association response: configured center-freq: 2437 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT.
Hi Felix,
My guess is that this message is coming from minstrel_ht. Could you
explain what it means?
Milan,
Does your AP have DFS enabled?
Gr. AvS
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
2012-01-24 10:31 BCM4313 keeps disconnecting with brcmsmac and multiple APs Milan Bouchet-Valat
2012-01-27 8:46 ` Arend van Spriel
@ 2012-01-27 10:08 ` Arend van Spriel
2012-01-27 10:26 ` Milan Bouchet-Valat
1 sibling, 1 reply; 11+ messages in thread
From: Arend van Spriel @ 2012-01-27 10:08 UTC (permalink / raw)
To: Milan Bouchet-Valat; +Cc: linux-wireless
On 01/24/2012 11:31 AM, Milan Bouchet-Valat wrote:
> [ 2.489970] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=21b4
> [ 2.489978] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 2.489984] usb 2-1.3: Product: Broadcom 2070 Bluetooth
> [ 2.489988] usb 2-1.3: Manufacturer: Broadcom Corp
> [ 2.489992] usb 2-1.3: SerialNumber: 002713DDD4FC
Hi Milan,
Another thing to consider. I notice that you have a bluetooth device in
there as well. Can you disable that (if possible) and try again.
Gr. AvS
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
2012-01-27 8:46 ` Arend van Spriel
@ 2012-01-27 10:19 ` Felix Fietkau
0 siblings, 0 replies; 11+ messages in thread
From: Felix Fietkau @ 2012-01-27 10:19 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Milan Bouchet-Valat, linux-wireless, Johannes Berg
On 2012-01-27 9:46 AM, Arend van Spriel wrote:
> On 01/24/2012 11:31 AM, Milan Bouchet-Valat wrote:
>> [ 297.365453] wlan0: Wrong control channel in association response: configured center-freq: 2437 hti-cfreq: 2462 hti->control_chan: 11 band: 0. Disabling HT.
>
> Hi Felix,
>
> My guess is that this message is coming from minstrel_ht. Could you
> explain what it means?
It's not minstrel_ht, it's this piece of code from net/mac80211/mlme.c:
if (enable_ht) {
hti_cfreq = ieee80211_channel_to_frequency(hti->control_chan,
sband->band);
/* check that channel matches the right operating channel */
if (local->hw.conf.channel->center_freq != hti_cfreq) {
/* Some APs mess this up, evidently.
* Netgear WNDR3700 sometimes reports 4 higher than
* the actual channel, for instance.
*/
printk(KERN_DEBUG
"%s: Wrong control channel in association"
" response: configured center-freq: %d"
" hti-cfreq: %d hti->control_chan: %d"
" band: %d. Disabling HT.\n",
sdata->name,
local->hw.conf.channel->center_freq,
hti_cfreq, hti->control_chan,
sband->band);
enable_ht = false;
}
}
- Felix
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
2012-01-27 10:08 ` Arend van Spriel
@ 2012-01-27 10:26 ` Milan Bouchet-Valat
2012-01-27 11:37 ` Arend van Spriel
2012-01-31 13:36 ` Milan Bouchet-Valat
0 siblings, 2 replies; 11+ messages in thread
From: Milan Bouchet-Valat @ 2012-01-27 10:26 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Milan Bouchet-Valat, linux-wireless
Le vendredi 27 janvier 2012 à 11:08 +0100, Arend van Spriel a écrit :
> Another thing to consider. I notice that you have a bluetooth device in
> there as well. Can you disable that (if possible) and try again.
I'll try that, but sadly not before Tuesday as I'm not in the right
place ATM.
> Does your AP have DFS enabled?
I'll ask my IT staff about that. Or is there a way to get this
information from the logs or iwconfig?
Thanks!
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
2012-01-27 10:26 ` Milan Bouchet-Valat
@ 2012-01-27 11:37 ` Arend van Spriel
2012-01-31 13:57 ` Milan Bouchet-Valat
2012-01-31 13:36 ` Milan Bouchet-Valat
1 sibling, 1 reply; 11+ messages in thread
From: Arend van Spriel @ 2012-01-27 11:37 UTC (permalink / raw)
To: Milan Bouchet-Valat; +Cc: Milan Bouchet-Valat, linux-wireless
On 01/27/2012 11:26 AM, Milan Bouchet-Valat wrote:
> Le vendredi 27 janvier 2012 à 11:08 +0100, Arend van Spriel a écrit :
>> Another thing to consider. I notice that you have a bluetooth device in
>> there as well. Can you disable that (if possible) and try again.
> I'll try that, but sadly not before Tuesday as I'm not in the right
> place ATM.
Ok. To disable bluetooth you could use the rfkill utility:
$ rfkill block bluetooth
>> Does your AP have DFS enabled?
> I'll ask my IT staff about that. Or is there a way to get this
> information from the logs or iwconfig?
>
I actually did mean whether the AP has automatic channel selection. I am
not sure whether it is advertised in the beacons.
Gr. AvS
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
2012-01-27 10:26 ` Milan Bouchet-Valat
2012-01-27 11:37 ` Arend van Spriel
@ 2012-01-31 13:36 ` Milan Bouchet-Valat
1 sibling, 0 replies; 11+ messages in thread
From: Milan Bouchet-Valat @ 2012-01-31 13:36 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-wireless
Le vendredi 27 janvier 2012 à 12:37 +0100, Arend van Spriel a écrit :
On 01/27/2012 11:26 AM, Milan Bouchet-Valat wrote:
> > Le vendredi 27 janvier 2012 à 11:08 +0100, Arend van Spriel a écrit :
> >> Another thing to consider. I notice that you have a bluetooth device in
> >> there as well. Can you disable that (if possible) and try again.
> > I'll try that, but sadly not before Tuesday as I'm not in the right
> > place ATM.
>
> Ok. To disable bluetooth you could use the rfkill utility:
>
> $ rfkill block bluetooth
> Yes, I did that, but it doesn't fix the problem.
>> Does your AP have DFS enabled?
> > I'll ask my IT staff about that. Or is there a way to get this
> > information from the logs or iwconfig?
> >
>
> I actually did mean whether the AP has automatic channel selection. I am
> not sure whether it is advertised in the beacons.
> I think you found the origin of the problem. I ran iwlist scan after the bug happened, and my network's APs are visible on 3 different channels (1, 6 and 11). When everything was fine, it was only on channel 11. The most surprising thing is that the precise AP I'm associated with is now visible on two channels (1 and 11).
Another weird fact is that after reloading brcmsmac (I had to do it twice to be able to reconnect), I still see my APs on these different 3 channels, and still it works fine. But maybe the channel change is what triggers the bug.
As you see, this is a very crowded place, with other networks using the same channels. This is probably not an ideal setup, but it's great to stress-test the drivers. ;-)
Regards
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
2012-01-27 11:37 ` Arend van Spriel
@ 2012-01-31 13:57 ` Milan Bouchet-Valat
2012-01-31 14:44 ` Arend van Spriel
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Milan Bouchet-Valat @ 2012-01-31 13:57 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-wireless
(Just noticed my Webmail got the quotations wrong. New attempt:)
Le vendredi 27 janvier 2012 à 12:37 +0100, Arend van Spriel a écrit :
On 01/27/2012 11:26 AM, Milan Bouchet-Valat wrote:
> > Le vendredi 27 janvier 2012 à 11:08 +0100, Arend van Spriel a écrit :
> >> Another thing to consider. I notice that you have a bluetooth device in
> >> there as well. Can you disable that (if possible) and try again.
> > I'll try that, but sadly not before Tuesday as I'm not in the right
> > place ATM.
>
> Ok. To disable bluetooth you could use the rfkill utility:
>
> $ rfkill block bluetooth
Yes, I did that, but it doesn't fix the problem.
>> Does your AP have DFS enabled?
> > I'll ask my IT staff about that. Or is there a way to get this
> > information from the logs or iwconfig?
> >
>
> I actually did mean whether the AP has automatic channel selection. I am
> not sure whether it is advertised in the beacons.
I think you found the origin of the problem. I ran iwlist scan after the bug happened, and my network's APs are visible on 3 different channels (1, 6 and 11). When everything was fine, it was only on channel 11. The most surprising thing is that the precise AP I'm associated with is now visible on two channels (1 and 11).
Another weird fact is that after reloading brcmsmac (I had to do it twice to be able to reconnect), I still see my APs on these different 3 channels, and still it works fine. But maybe the channel change is what triggers the bug.
As you see, this is a very crowded place, with other networks using the same channels. This is probably not an ideal setup, but it's great to stress-test the drivers. ;-)
Regards
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
2012-01-31 13:57 ` Milan Bouchet-Valat
@ 2012-01-31 14:44 ` Arend van Spriel
2012-01-31 14:57 ` Milan Bouchet-Valat
2012-02-02 9:35 ` Milan Bouchet-Valat
2 siblings, 0 replies; 11+ messages in thread
From: Arend van Spriel @ 2012-01-31 14:44 UTC (permalink / raw)
To: Milan Bouchet-Valat; +Cc: linux-wireless
On 01/31/2012 02:57 PM, Milan Bouchet-Valat wrote:
> (Just noticed my Webmail got the quotations wrong. New attempt:)
>
> Le vendredi 27 janvier 2012 à 12:37 +0100, Arend van Spriel a écrit :
> On 01/27/2012 11:26 AM, Milan Bouchet-Valat wrote:
>>> Le vendredi 27 janvier 2012 à 11:08 +0100, Arend van Spriel a écrit :
>>>> Another thing to consider. I notice that you have a bluetooth device in
>>>> there as well. Can you disable that (if possible) and try again.
>>> I'll try that, but sadly not before Tuesday as I'm not in the right
>>> place ATM.
>>
>> Ok. To disable bluetooth you could use the rfkill utility:
>>
>> $ rfkill block bluetooth
> Yes, I did that, but it doesn't fix the problem.
>
>>> Does your AP have DFS enabled?
>>> I'll ask my IT staff about that. Or is there a way to get this
>>> information from the logs or iwconfig?
>>>
>>
>> I actually did mean whether the AP has automatic channel selection. I am
>> not sure whether it is advertised in the beacons.
> I think you found the origin of the problem. I ran iwlist scan after the bug happened, and my network's APs are visible on 3 different channels (1, 6 and 11). When everything was fine, it was only on channel 11. The most surprising thing is that the precise AP I'm associated with is now visible on two channels (1 and 11).
>
> Another weird fact is that after reloading brcmsmac (I had to do it twice to be able to reconnect), I still see my APs on these different 3 channels, and still it works fine. But maybe the channel change is what triggers the bug.
>
> As you see, this is a very crowded place, with other networks using the same channels. This is probably not an ideal setup, but it's great to stress-test the drivers. ;-)
>
>
> Regards
>
Could you provide another log trace in which it goes wrong. I am
wondering whether it attempts to connect to a different AP or not. I
assume each AP has the same SSID and security configration, right?
Gr. AvS
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
2012-01-31 13:57 ` Milan Bouchet-Valat
2012-01-31 14:44 ` Arend van Spriel
@ 2012-01-31 14:57 ` Milan Bouchet-Valat
2012-02-02 9:35 ` Milan Bouchet-Valat
2 siblings, 0 replies; 11+ messages in thread
From: Milan Bouchet-Valat @ 2012-01-31 14:57 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-wireless
Le mardi 31 janvier 2012 à 15:44 +0100, Arend van Spriel a écrit :
> Could you provide another log trace in which it goes wrong.
Sure. Attached is /var/log/messages from the point where I resumed my computer this afternoon: you can see that the disconnection issue I described happened at 14:16. Then the NetworkManager auth dialog showed up twice, and I reloaded brcmsmac twice before it reconnected correctly.
> I am
> wondering whether it attempts to connect to a different AP or not. I
> assume each AP has the same SSID and security configration, right?
Same security configuration, yes (WPA2 and WPA1). If by SSID you mean ESSID, yes; but isn't it what defines a wireless network? I must be missing something.
Regards
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Re: BCM4313 keeps disconnecting with brcmsmac and multiple APs
2012-01-31 13:57 ` Milan Bouchet-Valat
2012-01-31 14:44 ` Arend van Spriel
2012-01-31 14:57 ` Milan Bouchet-Valat
@ 2012-02-02 9:35 ` Milan Bouchet-Valat
2 siblings, 0 replies; 11+ messages in thread
From: Milan Bouchet-Valat @ 2012-02-02 9:35 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 80 bytes --]
(For reference, I sent the missing attachmend privately to Arend two days ago.)
[-- Attachment #2: messages --]
[-- Type: application/octet-stream, Size: 118411 bytes --]
Jan 31 12:49:50 milan kernel: [54241.322370] PM: Syncing filesystems ... done.
Jan 31 13:59:56 milan kernel: [54242.570019] Freezing user space processes ... (elapsed 0.05 seconds) done.
Jan 31 13:59:56 milan kernel: [54242.624909] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jan 31 13:59:56 milan kernel: [54242.636029] Suspending console(s) (use no_console_suspend to debug)
Jan 31 13:59:56 milan kernel: [54242.636914] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jan 31 13:59:56 milan kernel: [54242.637509] sd 0:0:0:0: [sda] Stopping disk
Jan 31 13:59:56 milan kernel: [54242.691781] ehci_hcd 0000:00:1d.0: PCI INT A disabled
Jan 31 13:59:56 milan kernel: [54242.691803] ehci_hcd 0000:00:1a.0: PCI INT A disabled
Jan 31 13:59:56 milan kernel: [54242.782280] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Jan 31 13:59:56 milan kernel: [54243.226915] PM: suspend of devices complete after 591.755 msecs
Jan 31 13:59:56 milan kernel: [54243.246834] r8169 0000:01:00.0: wake-up capability enabled by ACPI
Jan 31 13:59:56 milan kernel: [54243.279791] PM: late suspend of devices complete after 52.957 msecs
Jan 31 13:59:56 milan kernel: [54243.279957] ACPI: Preparing to enter system sleep state S3
Jan 31 13:59:56 milan kernel: [54243.325978] PM: Saving platform NVS memory
Jan 31 13:59:56 milan kernel: [54243.329910] Disabling non-boot CPUs ...
Jan 31 13:59:56 milan kernel: [54243.331928] CPU 1 is now offline
Jan 31 13:59:56 milan kernel: [54243.333879] CPU 2 is now offline
Jan 31 13:59:56 milan kernel: [54243.335678] CPU 3 is now offline
Jan 31 13:59:56 milan kernel: [54243.336121] Extended CMOS year: 2000
Jan 31 13:59:56 milan kernel: [54243.336331] ACPI: Low-level resume complete
Jan 31 13:59:56 milan kernel: [54243.336386] PM: Restoring platform NVS memory
Jan 31 13:59:56 milan kernel: [54243.336956] Extended CMOS year: 2000
Jan 31 13:59:56 milan kernel: [54243.337179] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
Jan 31 13:59:56 milan kernel: [54243.337187] Enabling non-boot CPUs ...
Jan 31 13:59:56 milan kernel: [54243.337317] Booting Node 0 Processor 1 APIC 0x1
Jan 31 13:59:56 milan kernel: [54243.348319] Calibrating delay loop (skipped) already calibrated this CPU
Jan 31 13:59:56 milan kernel: [54243.368625] NMI watchdog enabled, takes one hw-pmu counter.
Jan 31 13:59:56 milan kernel: [54243.368888] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 31 13:59:56 milan kernel: [54243.368893] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.368898] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.368902] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880150d998c0), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.368937] CPU1 is up
Jan 31 13:59:56 milan kernel: [54243.369334] Switched to NOHz mode on CPU #1
Jan 31 13:59:56 milan kernel: [54243.369442] Booting Node 0 Processor 2 APIC 0x4
Jan 31 13:59:56 milan kernel: [54243.380443] Calibrating delay loop (skipped) already calibrated this CPU
Jan 31 13:59:56 milan kernel: [54243.400758] NMI watchdog enabled, takes one hw-pmu counter.
Jan 31 13:59:56 milan kernel: [54243.401011] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 31 13:59:56 milan kernel: [54243.401016] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.401022] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.401026] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880150d99b18), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.401221] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
Jan 31 13:59:56 milan kernel: [54243.401230] CPU2 is up
Jan 31 13:59:56 milan kernel: [54243.401277] Switched to NOHz mode on CPU #2
Jan 31 13:59:56 milan kernel: [54243.401309] Booting Node 0 Processor 3 APIC 0x5
Jan 31 13:59:56 milan kernel: [54243.412310] Calibrating delay loop (skipped) already calibrated this CPU
Jan 31 13:59:56 milan kernel: [54243.432613] NMI watchdog enabled, takes one hw-pmu counter.
Jan 31 13:59:56 milan kernel: [54243.432891] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Jan 31 13:59:56 milan kernel: [54243.432896] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880150d998e8), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.432901] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880150d997d0), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.432906] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880150d99a78), AE_NOT_FOUND (20110623/psparse-536)
Jan 31 13:59:56 milan kernel: [54243.432961] CPU3 is up
Jan 31 13:59:56 milan kernel: [54243.434803] Switched to NOHz mode on CPU #3
Jan 31 13:59:56 milan kernel: [54243.435231] ACPI: Waking up from system sleep state S3
Jan 31 13:59:56 milan kernel: [54243.504575] PM: early resume of devices complete after 0.727 msecs
Jan 31 13:59:56 milan kernel: [54243.504684] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 31 13:59:56 milan kernel: [54243.504724] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jan 31 13:59:56 milan kernel: [54243.504865] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jan 31 13:59:56 milan kernel: [54243.505147] sd 0:0:0:0: [sda] Starting disk
Jan 31 13:59:56 milan kernel: [54243.518093] r8169 0000:01:00.0: wake-up capability disabled by ACPI
Jan 31 13:59:56 milan kernel: [54243.572104] Extended CMOS year: 2000
Jan 31 13:59:56 milan kernel: [54243.759839] usb 1-1.4: reset full speed USB device number 3 using ehci_hcd
Jan 31 13:59:56 milan kernel: [54243.810650] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 31 13:59:56 milan kernel: [54243.812650] ata5: SATA link down (SStatus 0 SControl 300)
Jan 31 13:59:56 milan kernel: [54243.867013] ata2.00: configured for UDMA/100
Jan 31 13:59:56 milan kernel: [54243.917671] usb 2-1.6: reset high speed USB device number 5 using ehci_hcd
Jan 31 13:59:56 milan kernel: [54244.066420] usb 2-1.3: reset full speed USB device number 3 using ehci_hcd
Jan 31 13:59:56 milan kernel: [54244.153391] btusb 2-1.3:1.0: no reset_resume for driver btusb?
Jan 31 13:59:56 milan kernel: [54244.153397] btusb 2-1.3:1.1: no reset_resume for driver btusb?
Jan 31 13:59:56 milan kernel: [54245.946951] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 31 13:59:56 milan kernel: [54245.949040] ata1.00: configured for UDMA/100
Jan 31 13:59:56 milan kernel: [54246.615223] PM: resume of devices complete after 3116.002 msecs
Jan 31 13:59:56 milan kernel: [54246.615790] Restarting tasks ... done.
Jan 31 13:59:56 milan systemd[1]: Service bluetooth.target is not needed anymore. Stopping.
Jan 31 13:59:56 milan kernel: [54246.622008] video LNXVIDEO:00: Restoring backlight state
Jan 31 13:59:57 milan bluetoothd[962]: HCI dev 0 unregistered
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: HCI dev 0 unregistered
Jan 31 13:59:57 milan bluetoothd[962]: Stopping hci0 event socket
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: Stopping hci0 event socket
Jan 31 13:59:57 milan bluetoothd[962]: Unregister path: /org/bluez/962/hci0
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: Unregister path: /org/bluez/962/hci0
Jan 31 13:59:57 milan bluetoothd[962]: HCI dev 0 registered
Jan 31 13:59:57 milan bluetoothd[962]: Listening for HCI events on hci0
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: HCI dev 0 registered
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: Listening for HCI events on hci0
Jan 31 13:59:57 milan dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 13:59:57 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 13:59:57 milan kernel: [54247.628950] Bluetooth: hci0 command tx timeout
Jan 31 13:59:57 milan bluetoothd[962]: HCI dev 0 up
Jan 31 13:59:57 milan bluetoothd[962]: bluetoothd[962]: HCI dev 0 up
Jan 31 13:59:57 milan dbus[1022]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.68" (uid=1000 pid=1615 comm="/usr/bin/gnome-shell ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.3" (uid=0 pid=962 comm="/usr/sbin/bluetoothd -n ")
Jan 31 13:59:57 milan dbus-daemon[1022]: dbus[1022]: [system] Rejected send message, 3 matched rules; type="error", sender=":1.68" (uid=1000 pid=1615 comm="/usr/bin/gnome-shell ") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.3" (uid=0 pid=962 comm="/usr/sbin/bluetoothd -n ")
Jan 31 13:59:58 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 13:59:58 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 13:59:58 milan NetworkManager[1013]: <info> wake requested (sleeping: yes enabled: yes)
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> wake requested (sleeping: yes enabled: yes)
Jan 31 13:59:58 milan NetworkManager[1013]: <info> waking up and re-enabling...
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (em1): now managed
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> waking up and re-enabling...
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (em1): now managed
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (em1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (em1): bringing up device.
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (em1): bringing up device.
Jan 31 13:59:58 milan kernel: [54248.637080] r8169 0000:01:00.0: em1: link down
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (em1): preparing device.
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (em1): preparing device.
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (em1): deactivating device (reason 'managed') [2]
Jan 31 13:59:58 milan kernel: [54248.637600] ADDRCONF(NETDEV_UP): em1: link is not ready
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 13:59:58 milan kernel: [54248.766954] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 31 13:59:58 milan kernel: [54248.767000] ieee80211 phy1: brcms_ops_config: change power-save mode: false (implement)
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 13:59:58 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 13:59:58 milan kernel: [54248.767689] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 13:59:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 13:59:59 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 13:59:59 milan NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 13:59:59 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 13:59:59 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 13:59:59 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 13:59:59 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 13:59:59 milan dbus-daemon[1022]: ** (upowerd:1263): WARNING **: Property get or set does not have an interface string as first arg
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:00:00 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:00:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:00:00 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:00:01 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 31 14:00:01 milan dbus[1022]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 31 14:00:01 milan dbus-daemon[1022]: Launching FprintObject
Jan 31 14:00:01 milan dbus[1022]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 31 14:00:01 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 31 14:00:01 milan dbus-daemon[1022]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Jan 31 14:00:01 milan dbus-daemon[1022]: ** Message: entering main loop
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 31 14:00:01 milan kernel: [54251.590435] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 31 14:00:01 milan kernel: [54251.590445] ieee80211 phy1: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 31 14:00:01 milan kernel: [54251.590449] ieee80211 phy1: changing basic rates failed: -22
Jan 31 14:00:01 milan kernel: [54251.590452] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Jan 31 14:00:01 milan kernel: [54251.590974] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 31 14:00:01 milan kernel: [54251.591069] cfg80211: Calling CRDA for country: FR
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> completed
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> completed
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 31 14:00:01 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 31 14:00:01 milan kernel: [54251.848938] cfg80211: Regulatory domain changed to country: FR
Jan 31 14:00:01 milan kernel: [54251.848942] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:00:01 milan kernel: [54251.848944] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:00:01 milan kernel: [54251.848946] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:00:01 milan kernel: [54251.848948] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:00:01 milan kernel: [54251.848950] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> dhclient started with pid 7496
Jan 31 14:00:01 milan NetworkManager[1013]: <info> dhclient started with pid 7496
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Beginning IP6 addrconf.
Jan 31 14:00:01 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 31 14:00:01 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 31 14:00:02 milan dhclient[7496]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 31 14:00:02 milan dhclient[7496]: Copyright 2004-2012 Internet Systems Consortium.
Jan 31 14:00:02 milan dhclient[7496]: All rights reserved.
Jan 31 14:00:02 milan dhclient[7496]: For info, please visit https://www.isc.org/software/dhcp/
Jan 31 14:00:02 milan dhclient[7496]:
Jan 31 14:00:02 milan NetworkManager[1013]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 31 14:00:02 milan NetworkManager[1013]: Copyright 2004-2012 Internet Systems Consortium.
Jan 31 14:00:02 milan NetworkManager[1013]: All rights reserved.
Jan 31 14:00:02 milan NetworkManager[1013]: For info, please visit https://www.isc.org/software/dhcp/
Jan 31 14:00:02 milan NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 31 14:00:02 milan dhclient[7496]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:00:02 milan NetworkManager[1013]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:00:02 milan dhclient[7496]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:00:02 milan NetworkManager[1013]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:00:02 milan dhclient[7496]: Sending on Socket/fallback
Jan 31 14:00:02 milan NetworkManager[1013]: Sending on Socket/fallback
Jan 31 14:00:02 milan dhclient[7496]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 31 14:00:02 milan NetworkManager[1013]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 31 14:00:02 milan dhclient[7496]: DHCPACK from 10.92.72.1
Jan 31 14:00:02 milan NetworkManager[1013]: DHCPACK from 10.92.72.1
Jan 31 14:00:02 milan dhclient[7496]: bound to 10.92.72.73 -- renewal in 273904 seconds.
Jan 31 14:00:02 milan NetworkManager[1013]: bound to 10.92.72.73 -- renewal in 273904 seconds.
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 31 14:00:02 milan NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 31 14:00:02 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 31 14:00:02 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> address 10.92.72.73
Jan 31 14:00:02 milan NetworkManager[1013]: <info> address 10.92.72.73
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> prefix 23 (255.255.254.0)
Jan 31 14:00:02 milan NetworkManager[1013]: <info> prefix 23 (255.255.254.0)
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> gateway 10.92.72.1
Jan 31 14:00:02 milan NetworkManager[1013]: <info> gateway 10.92.72.1
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> nameserver '83.145.66.194'
Jan 31 14:00:02 milan NetworkManager[1013]: <info> nameserver '83.145.66.194'
Jan 31 14:00:02 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 31 14:00:02 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 31 14:00:03 milan avahi-daemon[1014]: Registering new address record for fe80::72f3:95ff:fe36:83df on wlan0.*.
Jan 31 14:00:04 milan ntpd[1379]: Listen normally on 18 wlan0 fe80::72f3:95ff:fe36:83df UDP 123
Jan 31 14:00:04 milan ntpd[1379]: peers refreshed
Jan 31 14:00:22 milan NetworkManager[1013]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): IP6 addrconf timed out or failed.
Jan 31 14:00:22 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 31 14:00:22 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 31 14:00:22 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 31 14:00:22 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Jan 31 14:00:22 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 31 14:00:22 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 31 14:00:22 milan kernel: [54271.976631] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 31 14:00:22 milan avahi-daemon[1014]: Joining mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 31 14:00:22 milan avahi-daemon[1014]: New relevant interface wlan0.IPv4 for mDNS.
Jan 31 14:00:22 milan avahi-daemon[1014]: Registering new address record for 10.92.72.73 on wlan0.IPv4.
Jan 31 14:00:23 milan NetworkManager[1013]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 31 14:00:23 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 31 14:00:23 milan NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:1A:4F:82 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 31 14:00:23 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:1A:4F:82 (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 31 14:00:23 milan NetworkManager[1013]: NetworkManager[1013]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 31 14:00:23 milan NetworkManager[1013]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 31 14:00:23 milan NetworkManager[1013]: <info> Activation (wlan0) successful, device activated.
Jan 31 14:00:23 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) successful, device activated.
Jan 31 14:00:23 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 31 14:00:23 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 31 14:00:23 milan ntpd[1379]: Listen normally on 19 wlan0 10.92.72.73 UDP 123
Jan 31 14:00:23 milan ntpd[1379]: peers refreshed
Jan 31 14:00:24 milan ntpd[1379]: 0.0.0.0 0638 08 no_sys_peer
Jan 31 14:00:32 milan dbus-daemon[1022]: ** Message: No devices in use, exit
Jan 31 14:02:12 milan bluetoothd[962]: HCI dev 0 down
Jan 31 14:02:12 milan bluetoothd[962]: bluetoothd[962]: HCI dev 0 down
Jan 31 14:04:47 milan kernel: [54537.370808] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:05:31 milan kernel: [54580.893287] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:06:38 milan kernel: [54647.744780] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:08:28 milan kernel: [54757.570181] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:08:28 milan kernel: [54757.571506] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:08:28 milan kernel: [54757.572535] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:08:52 milan kernel: [54781.463682] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 4
Jan 31 14:08:52 milan kernel: [54781.464991] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
Jan 31 14:08:52 milan kernel: [54781.478951] psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
Jan 31 14:11:48 milan kernel: [54957.559082] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:11:48 milan kernel: [54957.559730] ieee80211 phy1: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:16:39 milan kernel: [55247.511755] ieee80211 phy1: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 31 14:16:39 milan kernel: [55247.511768] ieee80211 phy1: brcmsmac: brcms_ops_bss_info_changed: disassociated
Jan 31 14:16:39 milan kernel: [55247.511773] ieee80211 phy1: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
Jan 31 14:16:39 milan kernel: [55247.549530] cfg80211: Calling CRDA to update world regulatory domain
Jan 31 14:16:39 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 31 14:16:39 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 31 14:16:39 milan kernel: [55247.639470] cfg80211: World regulatory domain updated:
Jan 31 14:16:39 milan kernel: [55247.639474] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:16:39 milan kernel: [55247.639477] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:16:39 milan kernel: [55247.639479] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:16:39 milan kernel: [55247.639482] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:16:39 milan kernel: [55247.639484] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:16:39 milan kernel: [55247.639487] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:16:39 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:16:39 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:16:40 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:16:40 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:16:41 milan NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:E9:27:72 (Ensae.Ancien) to (none) ((none))
Jan 31 14:16:41 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:E9:27:72 (Ensae.Ancien) to (none) ((none))
Jan 31 14:16:55 milan NetworkManager[1013]: <warn> (wlan0): link timed out.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: activated -> disconnected (reason 'supplicant-timeout') [100 30 11]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'supplicant-timeout') [11]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <warn> (wlan0): link timed out.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: activated -> disconnected (reason 'supplicant-timeout') [100 30 11]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'supplicant-timeout') [11]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 7496
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 7496
Jan 31 14:16:55 milan avahi-daemon[1014]: Withdrawing address record for 10.92.72.73 on wlan0.
Jan 31 14:16:55 milan avahi-daemon[1014]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 31 14:16:55 milan avahi-daemon[1014]: Interface wlan0.IPv4 no longer relevant for mDNS.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:16:55 milan dbus[1022]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:16:55 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:16:55 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:16:55 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:16:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:16:55 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 31 14:16:55 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 31 14:16:56 milan ntpd[1379]: Deleting interface #19 wlan0, 10.92.72.73#123, interface stats: received=12, sent=20, dropped=0, active_time=993 secs
Jan 31 14:16:56 milan ntpd[1379]: 88.190.25.158 interface 10.92.72.73 -> (none)
Jan 31 14:16:56 milan ntpd[1379]: 46.105.125.63 interface 10.92.72.73 -> (none)
Jan 31 14:16:56 milan ntpd[1379]: 88.190.17.126 interface 10.92.72.73 -> (none)
Jan 31 14:16:56 milan ntpd[1379]: 88.190.227.30 interface 10.92.72.73 -> (none)
Jan 31 14:16:56 milan ntpd[1379]: peers refreshed
Jan 31 14:16:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:16:58 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:16:59 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:16:59 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:17:20 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:17:20 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:20 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:17:20 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:20 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:17:20 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:17:20 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:17:20 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:17:20 milan NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:17:20 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:17:24 milan NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:17:24 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:17:24 milan NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:17:24 milan NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:17:24 milan NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:17:24 milan NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:17:24 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:17:24 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:17:27 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:17:27 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:17:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:17:52 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:17:52 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:52 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:17:52 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:17:52 milan NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:17:52 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:17:52 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:17:52 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:17:52 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:17:52 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:17:54 milan NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:17:54 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:17:54 milan NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:17:54 milan NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:17:54 milan NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:17:54 milan NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:17:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:17:54 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:21:54 milan avahi-daemon[1014]: Withdrawing address record for fe80::72f3:95ff:fe36:83df on wlan0.
Jan 31 14:21:54 milan avahi-daemon[1014]: Withdrawing workstation service for wlan0.
Jan 31 14:21:54 milan NetworkManager[1013]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy1/rfkill8 disappeared
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy1/rfkill8 disappeared
Jan 31 14:21:54 milan NetworkManager[1013]: <info> (wlan0): now unmanaged
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): now unmanaged
Jan 31 14:21:54 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> unmanaged (reason 'removed') [30 10 36]
Jan 31 14:21:54 milan NetworkManager[1013]: <info> (wlan0): cleaning up...
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> unmanaged (reason 'removed') [30 10 36]
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): cleaning up...
Jan 31 14:21:54 milan NetworkManager[1013]: <warn> (4) failed to find interface name for index
Jan 31 14:21:54 milan NetworkManager[1013]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 31 14:21:54 milan NetworkManager[1013]: <error> [1328016114.120742] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <warn> (4) failed to find interface name for index
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 31 14:21:54 milan NetworkManager[1013]: NetworkManager[1013]: <error> [1328016114.120742] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 31 14:21:55 milan ntpd[1379]: Deleting interface #18 wlan0, fe80::72f3:95ff:fe36:83df#123, interface stats: received=0, sent=0, dropped=0, active_time=1311 secs
Jan 31 14:21:55 milan ntpd[1379]: peers refreshed
Jan 31 14:21:58 milan kernel: [55565.634065] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
Jan 31 14:21:58 milan kernel: [55565.688126] brcms_module_init: register returned 0
Jan 31 14:21:58 milan kernel: [55565.689457] cfg80211: Calling CRDA for country: US
Jan 31 14:21:58 milan kernel: [55565.695946] cfg80211: Regulatory domain changed to country: US
Jan 31 14:21:58 milan kernel: [55565.695950] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:21:58 milan kernel: [55565.695954] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 31 14:21:58 milan kernel: [55565.695957] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 31 14:21:58 milan kernel: [55565.695960] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.695963] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.695966] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.695968] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 31 14:21:58 milan kernel: [55565.864911] cfg80211: Calling CRDA for country: FR
Jan 31 14:21:58 milan NetworkManager[1013]: <info> found WiFi radio killswitch rfkill10 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy2/rfkill10) (driver (unknown))
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> found WiFi radio killswitch rfkill10 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy2/rfkill10) (driver (unknown))
Jan 31 14:21:58 milan kernel: [55565.868421] cfg80211: Regulatory domain changed to country: FR
Jan 31 14:21:58 milan kernel: [55565.868423] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:21:58 milan kernel: [55565.868426] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.868428] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.868429] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:21:58 milan kernel: [55565.868431] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 5)
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 5)
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/3
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/3
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 14:21:58 milan kernel: [55566.181903] ieee80211 phy2: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 31 14:21:58 milan kernel: [55566.181916] ieee80211 phy2: brcms_ops_config: change power-save mode: false (implement)
Jan 31 14:21:58 milan kernel: [55566.182498] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 14:21:58 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 14:21:58 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:22:29 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:22:29 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:22:29 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:22:30 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:22:30 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:22:55 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:22:55 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:22:55 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): association took too long.
Jan 31 14:22:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:22:55 milan NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:22:55 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0/wireless): asking for new secrets
Jan 31 14:22:55 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:22:55 milan NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:22:55 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> disconnected
Jan 31 14:22:55 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Jan 31 14:22:57 milan NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:22:57 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:22:57 milan NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <warn> No agents were available for this request.
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed for access point (Ensae.Ancien)
Jan 31 14:22:57 milan NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <info> Marking connection 'Auto Ensae.Ancien' invalid.
Jan 31 14:22:57 milan NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <warn> Activation (wlan0) failed.
Jan 31 14:22:57 milan NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:22:57 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jan 31 14:22:57 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'none') [0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): access point 'Auto Ensae.Ancien' has security, but secrets are required.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:23:00 milan avahi-daemon[1014]: Withdrawing workstation service for wlan0.
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): now unmanaged
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> unmanaged (reason 'removed') [50 10 36]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): now unmanaged
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'removed') [36]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> unmanaged (reason 'removed') [50 10 36]
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'removed') [36]
Jan 31 14:23:00 milan NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: nm_system_iface_flush_routes: assertion `iface != NULL' failed
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: nm_system_iface_flush_routes: assertion `iface != NULL' failed
Jan 31 14:23:00 milan NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: <info> (wlan0): cleaning up...
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): cleaning up...
Jan 31 14:23:00 milan NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <warn> (5) failed to find interface name for index
Jan 31 14:23:00 milan NetworkManager[1013]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: (nm-system.c:679):nm_system_iface_is_up: runtime check failed: (iface != NULL)
Jan 31 14:23:00 milan NetworkManager[1013]: <error> [1328016180.929334] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <error> [1328016180.929334] [nm-system.c:681] nm_system_iface_is_up(): (unknown): failed to get interface link object
Jan 31 14:23:00 milan NetworkManager[1013]: NetworkManager[1013]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy2/rfkill10 disappeared
Jan 31 14:23:00 milan NetworkManager[1013]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy2/rfkill10 disappeared
Jan 31 14:23:03 milan kernel: [55630.545382] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
Jan 31 14:23:03 milan kernel: [55630.561073] cfg80211: Calling CRDA for country: US
Jan 31 14:23:03 milan kernel: [55630.561109] brcms_module_init: register returned 0
Jan 31 14:23:03 milan kernel: [55630.569663] cfg80211: Current regulatory domain intersected:
Jan 31 14:23:03 milan kernel: [55630.569666] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:23:03 milan kernel: [55630.569669] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:03 milan kernel: [55630.569670] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1700 mBm)
Jan 31 14:23:03 milan kernel: [55630.569672] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:03 milan kernel: [55630.569674] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:03 milan kernel: [55630.569676] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:03 milan NetworkManager[1013]: <info> found WiFi radio killswitch rfkill11 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy3/rfkill11) (driver (unknown))
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> found WiFi radio killswitch rfkill11 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy3/rfkill11) (driver (unknown))
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 6)
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 6)
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/4
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/4
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): now managed
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): bringing up device.
Jan 31 14:23:03 milan kernel: [55630.622227] ieee80211 phy3: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 31 14:23:03 milan kernel: [55630.622237] ieee80211 phy3: brcms_ops_config: change power-save mode: false (implement)
Jan 31 14:23:03 milan kernel: [55630.622708] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): preparing device.
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): deactivating device (reason 'managed') [2]
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: starting -> ready
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Jan 31 14:23:03 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 14:23:03 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: ready -> inactive
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Auto-activating connection 'Auto Ensae.Ancien'.
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) starting connection 'Auto Ensae.Ancien'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:23:04 milan NetworkManager[1013]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:04 milan NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless): connection 'Auto Ensae.Ancien' has security, and secrets exist. No new secrets needed.
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'ssid' value 'Ensae.Ancien'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'scan_ssid' value '1'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'psk' value '<omitted>'
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: added 'proto' value 'WPA RSN'
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jan 31 14:23:04 milan NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> Config: set interface ap_scan to 1
Jan 31 14:23:04 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:23:04 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: inactive -> scanning
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jan 31 14:23:05 milan kernel: [55632.770659] ieee80211 phy3: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 31 14:23:05 milan kernel: [55632.770668] ieee80211 phy3: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 31 14:23:05 milan kernel: [55632.770673] ieee80211 phy3: changing basic rates failed: -22
Jan 31 14:23:05 milan kernel: [55632.770677] ieee80211 phy3: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Jan 31 14:23:05 milan kernel: [55632.771246] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 31 14:23:05 milan kernel: [55632.771320] cfg80211: Calling CRDA for country: FR
Jan 31 14:23:05 milan kernel: [55632.775035] cfg80211: Regulatory domain changed to country: FR
Jan 31 14:23:05 milan kernel: [55632.775038] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:23:05 milan kernel: [55632.775041] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:05 milan kernel: [55632.775043] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:05 milan kernel: [55632.775046] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:23:05 milan kernel: [55632.775048] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Ensae.Ancien'.
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jan 31 14:23:05 milan NetworkManager[1013]: <info> dhclient started with pid 7970
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> dhclient started with pid 7970
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jan 31 14:23:05 milan dhclient[7970]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 31 14:23:05 milan dhclient[7970]: Copyright 2004-2012 Internet Systems Consortium.
Jan 31 14:23:05 milan dhclient[7970]: All rights reserved.
Jan 31 14:23:05 milan dhclient[7970]: For info, please visit https://www.isc.org/software/dhcp/
Jan 31 14:23:05 milan dhclient[7970]:
Jan 31 14:23:05 milan NetworkManager[1013]: Internet Systems Consortium DHCP Client 4.2.3-P2
Jan 31 14:23:05 milan NetworkManager[1013]: Copyright 2004-2012 Internet Systems Consortium.
Jan 31 14:23:05 milan NetworkManager[1013]: All rights reserved.
Jan 31 14:23:05 milan NetworkManager[1013]: For info, please visit https://www.isc.org/software/dhcp/
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Jan 31 14:23:05 milan dhclient[7970]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:23:05 milan dhclient[7970]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:23:05 milan NetworkManager[1013]: Listening on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:23:05 milan dhclient[7970]: Sending on Socket/fallback
Jan 31 14:23:05 milan NetworkManager[1013]: Sending on LPF/wlan0/70:f3:95:36:83:df
Jan 31 14:23:05 milan NetworkManager[1013]: Sending on Socket/fallback
Jan 31 14:23:05 milan dhclient[7970]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 31 14:23:05 milan NetworkManager[1013]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Jan 31 14:23:05 milan dhclient[7970]: DHCPACK from 10.92.72.1
Jan 31 14:23:05 milan NetworkManager[1013]: DHCPACK from 10.92.72.1
Jan 31 14:23:05 milan dhclient[7970]: bound to 10.92.72.73 -- renewal in 270367 seconds.
Jan 31 14:23:05 milan NetworkManager[1013]: bound to 10.92.72.73 -- renewal in 270367 seconds.
Jan 31 14:23:05 milan NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Jan 31 14:23:05 milan NetworkManager[1013]: <info> address 10.92.72.73
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> address 10.92.72.73
Jan 31 14:23:05 milan NetworkManager[1013]: <info> prefix 23 (255.255.254.0)
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> prefix 23 (255.255.254.0)
Jan 31 14:23:05 milan NetworkManager[1013]: <info> gateway 10.92.72.1
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> gateway 10.92.72.1
Jan 31 14:23:05 milan NetworkManager[1013]: <info> nameserver '83.145.66.194'
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> nameserver '83.145.66.194'
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 31 14:23:05 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 31 14:23:05 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Jan 31 14:23:05 milan avahi-daemon[1014]: Joining mDNS multicast group on interface wlan0.IPv4 with address 10.92.72.73.
Jan 31 14:23:05 milan kernel: [55633.069747] ieee80211 phy3: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 31 14:23:05 milan avahi-daemon[1014]: New relevant interface wlan0.IPv4 for mDNS.
Jan 31 14:23:05 milan avahi-daemon[1014]: Registering new address record for 10.92.72.73 on wlan0.IPv4.
Jan 31 14:23:06 milan kernel: [55633.713448] cfg80211: Calling CRDA to update world regulatory domain
Jan 31 14:23:06 milan kernel: [55633.720018] cfg80211: World regulatory domain updated:
Jan 31 14:23:06 milan kernel: [55633.720023] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:23:06 milan kernel: [55633.720028] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:23:06 milan kernel: [55633.720033] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:23:06 milan kernel: [55633.720037] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:23:06 milan kernel: [55633.720041] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:23:06 milan kernel: [55633.720045] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:23:06 milan NetworkManager[1013]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 31 14:23:06 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jan 31 14:23:06 milan NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:44:95:4A (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 31 14:23:06 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): roamed from BSSID 00:09:0F:44:95:4A (Ensae.Ancien) to 00:09:0F:E9:27:72 (Ensae.Ancien)
Jan 31 14:23:06 milan NetworkManager[1013]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 31 14:23:06 milan NetworkManager[1013]: <info> Activation (wlan0) successful, device activated.
Jan 31 14:23:06 milan NetworkManager[1013]: NetworkManager[1013]: <info> Policy set 'Auto Ensae.Ancien' (wlan0) as default for IPv4 routing and DNS.
Jan 31 14:23:06 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) successful, device activated.
Jan 31 14:23:06 milan NetworkManager[1013]: NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 31 14:23:06 milan NetworkManager[1013]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 31 14:23:06 milan dbus[1022]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 31 14:23:06 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Jan 31 14:23:06 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 31 14:23:06 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 31 14:23:06 milan systemd[1]: iscsi.service: control process exited, code=exited status=3
Jan 31 14:23:06 milan ntpd[1379]: Listen normally on 20 wlan0 10.92.72.73 UDP 123
Jan 31 14:23:06 milan ntpd[1379]: peers refreshed
Jan 31 14:23:07 milan dbus-daemon[1022]: Starting iscsi (via systemctl): Job failed. See system logs and 'systemctl status' for details.
Jan 31 14:23:07 milan systemd[1]: Unit iscsi.service entered failed state.
Jan 31 14:23:07 milan dbus-daemon[1022]: [FAILED]
Jan 31 14:23:07 milan nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/04-iscsi' exited with error status 1.
Jan 31 14:23:07 milan avahi-daemon[1014]: Registering new address record for fe80::72f3:95ff:fe36:83df on wlan0.*.
Jan 31 14:23:07 milan dbus-daemon[1022]: Mounting other filesystems: [ OK ]
Jan 31 14:23:07 milan kernel: [55635.151396] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:23:08 milan ntpd[1379]: Listen normally on 21 wlan0 fe80::72f3:95ff:fe36:83df UDP 123
Jan 31 14:23:08 milan ntpd[1379]: peers refreshed
Jan 31 14:23:12 milan kernel: [55640.456428] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:24:07 milan systemd[1]: PID file /run/sendmail.pid not readable (yet?) after start.
Jan 31 14:26:26 milan kernel: [55833.980271] ieee80211 phy3: brcms_ops_bss_info_changed: qos enabled: false (implement)
Jan 31 14:26:26 milan kernel: [55833.980283] ieee80211 phy3: brcmsmac: brcms_ops_bss_info_changed: disassociated
Jan 31 14:26:26 milan kernel: [55833.980290] ieee80211 phy3: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
Jan 31 14:26:26 milan kernel: [55834.007629] cfg80211: Calling CRDA to update world regulatory domain
Jan 31 14:26:26 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 31 14:26:26 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jan 31 14:26:26 milan kernel: [55834.065238] cfg80211: World regulatory domain updated:
Jan 31 14:26:26 milan kernel: [55834.065243] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:26:26 milan kernel: [55834.065249] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:26:26 milan kernel: [55834.065253] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:26:26 milan kernel: [55834.065257] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:26:26 milan kernel: [55834.065261] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:26:26 milan kernel: [55834.065265] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 31 14:26:26 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:26:26 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jan 31 14:26:27 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> associating
Jan 31 14:26:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: scanning -> associating
Jan 31 14:26:27 milan kernel: [55834.772512] ieee80211 phy3: brcms_ops_bss_info_changed: qos enabled: true (implement)
Jan 31 14:26:27 milan kernel: [55834.772524] ieee80211 phy3: brcmsmac: brcms_ops_bss_info_changed: associated
Jan 31 14:26:27 milan kernel: [55834.772530] ieee80211 phy3: changing basic rates failed: -22
Jan 31 14:26:27 milan kernel: [55834.772536] ieee80211 phy3: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Jan 31 14:26:27 milan kernel: [55834.773331] cfg80211: Calling CRDA for country: FR
Jan 31 14:26:27 milan kernel: [55834.776703] cfg80211: Regulatory domain changed to country: FR
Jan 31 14:26:27 milan kernel: [55834.776706] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 31 14:26:27 milan kernel: [55834.776708] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:26:27 milan kernel: [55834.776710] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:26:27 milan kernel: [55834.776712] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 31 14:26:27 milan kernel: [55834.776714] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 31 14:26:27 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:26:27 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associating -> associated
Jan 31 14:26:28 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 31 14:26:28 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Jan 31 14:26:28 milan NetworkManager[1013]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 31 14:26:28 milan NetworkManager[1013]: NetworkManager[1013]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Jan 31 14:28:48 milan kernel: [55975.791174] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:33:13 milan kernel: [56239.795810] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:33:13 milan kernel: [56239.798070] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:35:54 milan kernel: [56400.617455] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:36:54 milan kernel: [56460.515509] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:42:37 milan kernel: [56802.479518] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:43:22 milan kernel: [56848.365976] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:44:28 milan kernel: [56913.311649] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:46:03 milan kernel: [57008.229073] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:46:03 milan kernel: [57008.229391] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:46:03 milan kernel: [57008.229718] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:46:28 milan kernel: [57033.637881] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:47:54 milan kernel: [57119.366135] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:47:54 milan kernel: [57119.366505] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:52:09 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 14:52:09 milan dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 14:52:09 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 14:52:09 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 14:53:48 milan kernel: [57473.187972] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 14:55:57 milan dbus[1022]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 31 14:55:57 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Jan 31 14:55:57 milan dbus-daemon[1022]: Launching FprintObject
Jan 31 14:55:57 milan dbus[1022]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 31 14:55:57 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'net.reactivated.Fprint'
Jan 31 14:55:57 milan dbus-daemon[1022]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Jan 31 14:55:57 milan dbus-daemon[1022]: ** Message: entering main loop
Jan 31 14:56:27 milan dbus-daemon[1022]: ** Message: No devices in use, exit
Jan 31 14:59:49 milan ntpd[1379]: 0.0.0.0 0613 03 spike_detect +0.677230 s
Jan 31 15:00:11 milan dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 15:00:11 milan dbus-daemon[1022]: dbus[1022]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Jan 31 15:00:11 milan dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 15:00:11 milan dbus-daemon[1022]: dbus[1022]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Jan 31 15:00:27 milan ntpd[1379]: 0.0.0.0 061c 0c clock_step +0.676370 s
Jan 31 15:00:27 milan ntpd[1379]: 0.0.0.0 0615 05 clock_sync
Jan 31 15:00:28 milan ntpd[1379]: 0.0.0.0 c618 08 no_sys_peer
Jan 31 15:00:30 milan kernel: [57873.641506] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:00:35 milan kernel: [57878.632459] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:00:36 milan kernel: [57879.630671] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:00:36 milan kernel: [57879.631099] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:00:55 milan kernel: [57898.011877] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:13:39 milan kernel: [58660.775726] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:13:55 milan kernel: [58676.661720] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:13:55 milan kernel: [58676.662089] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:14:48 milan kernel: [58729.555724] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:20:35 milan kernel: [59076.565121] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:21:29 milan kernel: [59129.979685] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:24:14 milan kernel: [59294.662424] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:26:06 milan kernel: [59406.510930] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:30:55 milan kernel: [59694.891759] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:32:03 milan kernel: [59763.443175] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:32:39 milan kernel: [59798.796956] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:32:39 milan kernel: [59798.797822] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:40:55 milan kernel: [60293.850830] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:40:55 milan kernel: [60293.852614] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:41:39 milan kernel: [60337.859850] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:47:29 milan kernel: [60687.274961] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:47:29 milan kernel: [60687.275717] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:47:29 milan kernel: [60687.276391] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
Jan 31 15:48:39 milan kernel: [60757.133121] ieee80211 phy3: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2012-02-02 9:35 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-24 10:31 BCM4313 keeps disconnecting with brcmsmac and multiple APs Milan Bouchet-Valat
2012-01-27 8:46 ` Arend van Spriel
2012-01-27 10:19 ` Felix Fietkau
2012-01-27 10:08 ` Arend van Spriel
2012-01-27 10:26 ` Milan Bouchet-Valat
2012-01-27 11:37 ` Arend van Spriel
2012-01-31 13:57 ` Milan Bouchet-Valat
2012-01-31 14:44 ` Arend van Spriel
2012-01-31 14:57 ` Milan Bouchet-Valat
2012-02-02 9:35 ` Milan Bouchet-Valat
2012-01-31 13:36 ` Milan Bouchet-Valat
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.