* [PATCH] pci-assign: Switch to PCI_HOST_DEVADDR property
@ 2012-07-06 16:22 Jan Kiszka
2012-07-09 15:13 ` Alex Williamson
2012-07-11 10:03 ` Avi Kivity
0 siblings, 2 replies; 3+ messages in thread
From: Jan Kiszka @ 2012-07-06 16:22 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti; +Cc: kvm, Alex Williamson
Replace the home-brewed qdev property for PCI host addresses with the
new upstream version.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
hw/device-assignment.c | 64 ++++++++++++---------------------------
hw/pci.c | 77 ------------------------------------------------
hw/pci.h | 3 --
3 files changed, 20 insertions(+), 124 deletions(-)
diff --git a/hw/device-assignment.c b/hw/device-assignment.c
index 1336689..34593ab 100644
--- a/hw/device-assignment.c
+++ b/hw/device-assignment.c
@@ -63,13 +63,6 @@
#define DEBUG(fmt, ...) do { } while(0)
#endif
-typedef struct PCIHostDevice {
- int seg;
- int bus;
- int dev;
- int func;
-} PCIHostDevice;
-
typedef struct {
int type; /* Memory or port I/O */
int valid;
@@ -115,7 +108,7 @@ typedef struct {
typedef struct AssignedDevice {
PCIDevice dev;
- PCIHostDevice host;
+ PCIHostDeviceAddress host;
uint32_t features;
int intpin;
uint8_t debug_flags;
@@ -778,7 +771,8 @@ static void assign_failed_examine(AssignedDevice *dev)
int r;
sprintf(dir, "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/",
- dev->host.seg, dev->host.bus, dev->host.dev, dev->host.func);
+ dev->host.domain, dev->host.bus, dev->host.slot,
+ dev->host.function);
sprintf(name, "%sdriver", dir);
@@ -796,7 +790,8 @@ static void assign_failed_examine(AssignedDevice *dev)
fprintf(stderr, "*** The driver '%s' is occupying your device "
"%04x:%02x:%02x.%x.\n",
- ns, dev->host.seg, dev->host.bus, dev->host.dev, dev->host.func);
+ ns, dev->host.domain, dev->host.bus, dev->host.slot,
+ dev->host.function);
fprintf(stderr, "***\n");
fprintf(stderr, "*** You can try the following commands to free it:\n");
fprintf(stderr, "***\n");
@@ -804,10 +799,12 @@ static void assign_failed_examine(AssignedDevice *dev)
"new_id\n", vendor_id, device_id);
fprintf(stderr, "*** $ echo \"%04x:%02x:%02x.%x\" > /sys/bus/pci/drivers/"
"%s/unbind\n",
- dev->host.seg, dev->host.bus, dev->host.dev, dev->host.func, ns);
+ dev->host.domain, dev->host.bus, dev->host.slot,
+ dev->host.function, ns);
fprintf(stderr, "*** $ echo \"%04x:%02x:%02x.%x\" > /sys/bus/pci/drivers/"
"pci-stub/bind\n",
- dev->host.seg, dev->host.bus, dev->host.dev, dev->host.func);
+ dev->host.domain, dev->host.bus, dev->host.slot,
+ dev->host.function);
fprintf(stderr, "*** $ echo \"%04x %04x\" > /sys/bus/pci/drivers/pci-stub"
"/remove_id\n", vendor_id, device_id);
fprintf(stderr, "***\n");
@@ -1699,7 +1696,8 @@ static void reset_assigned_device(DeviceState *dev)
snprintf(reset_file, sizeof(reset_file),
"/sys/bus/pci/devices/%04x:%02x:%02x.%01x/reset",
- adev->host.seg, adev->host.bus, adev->host.dev, adev->host.func);
+ adev->host.domain, adev->host.bus, adev->host.slot,
+ adev->host.function);
/*
* Issue a device reset via pci-sysfs. Note that we use write(2) here
@@ -1732,7 +1730,8 @@ static int assigned_initfn(struct PCIDevice *pci_dev)
return -1;
}
- if (!dev->host.seg && !dev->host.bus && !dev->host.dev && !dev->host.func) {
+ if (!dev->host.domain && !dev->host.bus && !dev->host.slot &&
+ !dev->host.function) {
error_report("pci-assign: error: no host device specified");
return -1;
}
@@ -1757,8 +1756,8 @@ static int assigned_initfn(struct PCIDevice *pci_dev)
memcpy(dev->emulate_config_write, dev->emulate_config_read,
sizeof(dev->emulate_config_read));
- if (get_real_device(dev, dev->host.seg, dev->host.bus,
- dev->host.dev, dev->host.func)) {
+ if (get_real_device(dev, dev->host.domain, dev->host.bus,
+ dev->host.slot, dev->host.function)) {
error_report("pci-assign: Error: Couldn't get real device (%s)!",
dev->dev.qdev.id);
goto out;
@@ -1786,9 +1785,9 @@ static int assigned_initfn(struct PCIDevice *pci_dev)
dev->intpin = e_intx;
dev->run = 0;
dev->girq = -1;
- dev->h_segnr = dev->host.seg;
+ dev->h_segnr = dev->host.domain;
dev->h_busnr = dev->host.bus;
- dev->h_devfn = PCI_DEVFN(dev->host.dev, dev->host.func);
+ dev->h_devfn = PCI_DEVFN(dev->host.slot, dev->host.function);
/* assign device to guest */
r = assign_device(dev);
@@ -1824,33 +1823,9 @@ static int assigned_exitfn(struct PCIDevice *pci_dev)
return 0;
}
-static int parse_hostaddr(DeviceState *dev, Property *prop, const char *str)
-{
- PCIHostDevice *ptr = qdev_get_prop_ptr(dev, prop);
- int rc;
-
- rc = pci_parse_host_devaddr(str, &ptr->seg, &ptr->bus, &ptr->dev, &ptr->func);
- if (rc != 0)
- return -1;
- return 0;
-}
-
-static int print_hostaddr(DeviceState *dev, Property *prop, char *dest, size_t len)
-{
- PCIHostDevice *ptr = qdev_get_prop_ptr(dev, prop);
-
- return snprintf(dest, len, "%02x:%02x.%x", ptr->bus, ptr->dev, ptr->func);
-}
-
-PropertyInfo qdev_prop_hostaddr = {
- .name = "pci-hostaddr",
- .parse = parse_hostaddr,
- .print = print_hostaddr,
-};
-
static Property da_properties[] =
{
- DEFINE_PROP("host", AssignedDevice, host, qdev_prop_hostaddr, PCIHostDevice),
+ DEFINE_PROP_PCI_HOST_DEVADDR("host", AssignedDevice, host),
DEFINE_PROP_BIT("prefer_msi", AssignedDevice, features,
ASSIGNED_DEVICE_PREFER_MSI_BIT, false),
DEFINE_PROP_BIT("share_intx", AssignedDevice, features,
@@ -1907,7 +1882,8 @@ static void assigned_dev_load_option_rom(AssignedDevice *dev)
snprintf(rom_file, sizeof(rom_file),
"/sys/bus/pci/devices/%04x:%02x:%02x.%01x/rom",
- dev->host.seg, dev->host.bus, dev->host.dev, dev->host.func);
+ dev->host.domain, dev->host.bus, dev->host.slot,
+ dev->host.function);
if (stat(rom_file, &st)) {
return;
diff --git a/hw/pci.c b/hw/pci.c
index ef73761..8d7de02 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -555,83 +555,6 @@ static int pci_parse_devaddr(const char *addr, int *domp, int *busp,
return 0;
}
-/*
- * Parse device seg and bdf in device assignment command:
- *
- * -pcidevice host=[seg:]bus:dev.func
- *
- * Parse [seg:]<bus>:<slot>.<func> return -1 on error
- */
-int pci_parse_host_devaddr(const char *addr, int *segp, int *busp,
- int *slotp, int *funcp)
-{
- const char *p;
- char *e;
- int val;
- int seg = 0, bus = 0, slot = 0, func = 0;
-
- /* parse optional seg */
- p = addr;
- val = 0;
- while (1) {
- p = strchr(p, ':');
- if (p) {
- val++;
- p++;
- } else
- break;
- }
- if (val <= 0 || val > 2)
- return -1;
-
- p = addr;
- if (val == 2) {
- val = strtoul(p, &e, 16);
- if (e == p)
- return -1;
- if (*e == ':') {
- seg = val;
- p = e + 1;
- }
- } else
- seg = 0;
-
-
- /* parse bdf */
- val = strtoul(p, &e, 16);
- if (e == p)
- return -1;
- if (*e == ':') {
- bus = val;
- p = e + 1;
- val = strtoul(p, &e, 16);
- if (e == p)
- return -1;
- if (*e == '.') {
- slot = val;
- p = e + 1;
- val = strtoul(p, &e, 16);
- if (e == p)
- return -1;
- func = val;
- } else
- return -1;
- } else
- return -1;
-
- if (seg > 0xffff || bus > 0xff || slot > 0x1f || func > 0x7)
- return -1;
-
- if (*e)
- return -1;
-
- *segp = seg;
- *busp = bus;
- *slotp = slot;
- *funcp = func;
- return 0;
-}
-
int pci_read_devaddr(Monitor *mon, const char *addr, int *domp, int *busp,
unsigned *slotp)
{
diff --git a/hw/pci.h b/hw/pci.h
index fb84e40..62cf685 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -328,9 +328,6 @@ PCIBus *pci_get_bus_devfn(int *devfnp, const char *devaddr);
int pci_read_devaddr(Monitor *mon, const char *addr, int *domp, int *busp,
unsigned *slotp);
-int pci_parse_host_devaddr(const char *addr, int *segp, int *busp,
- int *slotp, int *funcp);
-
void pci_device_deassert_intx(PCIDevice *dev);
typedef DMAContext *(*PCIDMAContextFunc)(PCIBus *, void *, int);
--
1.7.3.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] pci-assign: Switch to PCI_HOST_DEVADDR property
2012-07-06 16:22 [PATCH] pci-assign: Switch to PCI_HOST_DEVADDR property Jan Kiszka
@ 2012-07-09 15:13 ` Alex Williamson
2012-07-11 10:03 ` Avi Kivity
1 sibling, 0 replies; 3+ messages in thread
From: Alex Williamson @ 2012-07-09 15:13 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Avi Kivity, Marcelo Tosatti, kvm
On Fri, 2012-07-06 at 18:22 +0200, Jan Kiszka wrote:
> Replace the home-brewed qdev property for PCI host addresses with the
> new upstream version.
>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
> hw/device-assignment.c | 64 ++++++++++++---------------------------
> hw/pci.c | 77 ------------------------------------------------
> hw/pci.h | 3 --
> 3 files changed, 20 insertions(+), 124 deletions(-)
Looks good
Acked-by: Alex Williamson <alex.williamson@redhat.com>
> diff --git a/hw/device-assignment.c b/hw/device-assignment.c
> index 1336689..34593ab 100644
> --- a/hw/device-assignment.c
> +++ b/hw/device-assignment.c
> @@ -63,13 +63,6 @@
> #define DEBUG(fmt, ...) do { } while(0)
> #endif
>
> -typedef struct PCIHostDevice {
> - int seg;
> - int bus;
> - int dev;
> - int func;
> -} PCIHostDevice;
> -
> typedef struct {
> int type; /* Memory or port I/O */
> int valid;
> @@ -115,7 +108,7 @@ typedef struct {
>
> typedef struct AssignedDevice {
> PCIDevice dev;
> - PCIHostDevice host;
> + PCIHostDeviceAddress host;
> uint32_t features;
> int intpin;
> uint8_t debug_flags;
> @@ -778,7 +771,8 @@ static void assign_failed_examine(AssignedDevice *dev)
> int r;
>
> sprintf(dir, "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/",
> - dev->host.seg, dev->host.bus, dev->host.dev, dev->host.func);
> + dev->host.domain, dev->host.bus, dev->host.slot,
> + dev->host.function);
>
> sprintf(name, "%sdriver", dir);
>
> @@ -796,7 +790,8 @@ static void assign_failed_examine(AssignedDevice *dev)
>
> fprintf(stderr, "*** The driver '%s' is occupying your device "
> "%04x:%02x:%02x.%x.\n",
> - ns, dev->host.seg, dev->host.bus, dev->host.dev, dev->host.func);
> + ns, dev->host.domain, dev->host.bus, dev->host.slot,
> + dev->host.function);
> fprintf(stderr, "***\n");
> fprintf(stderr, "*** You can try the following commands to free it:\n");
> fprintf(stderr, "***\n");
> @@ -804,10 +799,12 @@ static void assign_failed_examine(AssignedDevice *dev)
> "new_id\n", vendor_id, device_id);
> fprintf(stderr, "*** $ echo \"%04x:%02x:%02x.%x\" > /sys/bus/pci/drivers/"
> "%s/unbind\n",
> - dev->host.seg, dev->host.bus, dev->host.dev, dev->host.func, ns);
> + dev->host.domain, dev->host.bus, dev->host.slot,
> + dev->host.function, ns);
> fprintf(stderr, "*** $ echo \"%04x:%02x:%02x.%x\" > /sys/bus/pci/drivers/"
> "pci-stub/bind\n",
> - dev->host.seg, dev->host.bus, dev->host.dev, dev->host.func);
> + dev->host.domain, dev->host.bus, dev->host.slot,
> + dev->host.function);
> fprintf(stderr, "*** $ echo \"%04x %04x\" > /sys/bus/pci/drivers/pci-stub"
> "/remove_id\n", vendor_id, device_id);
> fprintf(stderr, "***\n");
> @@ -1699,7 +1696,8 @@ static void reset_assigned_device(DeviceState *dev)
>
> snprintf(reset_file, sizeof(reset_file),
> "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/reset",
> - adev->host.seg, adev->host.bus, adev->host.dev, adev->host.func);
> + adev->host.domain, adev->host.bus, adev->host.slot,
> + adev->host.function);
>
> /*
> * Issue a device reset via pci-sysfs. Note that we use write(2) here
> @@ -1732,7 +1730,8 @@ static int assigned_initfn(struct PCIDevice *pci_dev)
> return -1;
> }
>
> - if (!dev->host.seg && !dev->host.bus && !dev->host.dev && !dev->host.func) {
> + if (!dev->host.domain && !dev->host.bus && !dev->host.slot &&
> + !dev->host.function) {
> error_report("pci-assign: error: no host device specified");
> return -1;
> }
> @@ -1757,8 +1756,8 @@ static int assigned_initfn(struct PCIDevice *pci_dev)
> memcpy(dev->emulate_config_write, dev->emulate_config_read,
> sizeof(dev->emulate_config_read));
>
> - if (get_real_device(dev, dev->host.seg, dev->host.bus,
> - dev->host.dev, dev->host.func)) {
> + if (get_real_device(dev, dev->host.domain, dev->host.bus,
> + dev->host.slot, dev->host.function)) {
> error_report("pci-assign: Error: Couldn't get real device (%s)!",
> dev->dev.qdev.id);
> goto out;
> @@ -1786,9 +1785,9 @@ static int assigned_initfn(struct PCIDevice *pci_dev)
> dev->intpin = e_intx;
> dev->run = 0;
> dev->girq = -1;
> - dev->h_segnr = dev->host.seg;
> + dev->h_segnr = dev->host.domain;
> dev->h_busnr = dev->host.bus;
> - dev->h_devfn = PCI_DEVFN(dev->host.dev, dev->host.func);
> + dev->h_devfn = PCI_DEVFN(dev->host.slot, dev->host.function);
>
> /* assign device to guest */
> r = assign_device(dev);
> @@ -1824,33 +1823,9 @@ static int assigned_exitfn(struct PCIDevice *pci_dev)
> return 0;
> }
>
> -static int parse_hostaddr(DeviceState *dev, Property *prop, const char *str)
> -{
> - PCIHostDevice *ptr = qdev_get_prop_ptr(dev, prop);
> - int rc;
> -
> - rc = pci_parse_host_devaddr(str, &ptr->seg, &ptr->bus, &ptr->dev, &ptr->func);
> - if (rc != 0)
> - return -1;
> - return 0;
> -}
> -
> -static int print_hostaddr(DeviceState *dev, Property *prop, char *dest, size_t len)
> -{
> - PCIHostDevice *ptr = qdev_get_prop_ptr(dev, prop);
> -
> - return snprintf(dest, len, "%02x:%02x.%x", ptr->bus, ptr->dev, ptr->func);
> -}
> -
> -PropertyInfo qdev_prop_hostaddr = {
> - .name = "pci-hostaddr",
> - .parse = parse_hostaddr,
> - .print = print_hostaddr,
> -};
> -
> static Property da_properties[] =
> {
> - DEFINE_PROP("host", AssignedDevice, host, qdev_prop_hostaddr, PCIHostDevice),
> + DEFINE_PROP_PCI_HOST_DEVADDR("host", AssignedDevice, host),
> DEFINE_PROP_BIT("prefer_msi", AssignedDevice, features,
> ASSIGNED_DEVICE_PREFER_MSI_BIT, false),
> DEFINE_PROP_BIT("share_intx", AssignedDevice, features,
> @@ -1907,7 +1882,8 @@ static void assigned_dev_load_option_rom(AssignedDevice *dev)
>
> snprintf(rom_file, sizeof(rom_file),
> "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/rom",
> - dev->host.seg, dev->host.bus, dev->host.dev, dev->host.func);
> + dev->host.domain, dev->host.bus, dev->host.slot,
> + dev->host.function);
>
> if (stat(rom_file, &st)) {
> return;
> diff --git a/hw/pci.c b/hw/pci.c
> index ef73761..8d7de02 100644
> --- a/hw/pci.c
> +++ b/hw/pci.c
> @@ -555,83 +555,6 @@ static int pci_parse_devaddr(const char *addr, int *domp, int *busp,
> return 0;
> }
>
> -/*
> - * Parse device seg and bdf in device assignment command:
> - *
> - * -pcidevice host=[seg:]bus:dev.func
> - *
> - * Parse [seg:]<bus>:<slot>.<func> return -1 on error
> - */
> -int pci_parse_host_devaddr(const char *addr, int *segp, int *busp,
> - int *slotp, int *funcp)
> -{
> - const char *p;
> - char *e;
> - int val;
> - int seg = 0, bus = 0, slot = 0, func = 0;
> -
> - /* parse optional seg */
> - p = addr;
> - val = 0;
> - while (1) {
> - p = strchr(p, ':');
> - if (p) {
> - val++;
> - p++;
> - } else
> - break;
> - }
> - if (val <= 0 || val > 2)
> - return -1;
> -
> - p = addr;
> - if (val == 2) {
> - val = strtoul(p, &e, 16);
> - if (e == p)
> - return -1;
> - if (*e == ':') {
> - seg = val;
> - p = e + 1;
> - }
> - } else
> - seg = 0;
> -
> -
> - /* parse bdf */
> - val = strtoul(p, &e, 16);
> - if (e == p)
> - return -1;
> - if (*e == ':') {
> - bus = val;
> - p = e + 1;
> - val = strtoul(p, &e, 16);
> - if (e == p)
> - return -1;
> - if (*e == '.') {
> - slot = val;
> - p = e + 1;
> - val = strtoul(p, &e, 16);
> - if (e == p)
> - return -1;
> - func = val;
> - } else
> - return -1;
> - } else
> - return -1;
> -
> - if (seg > 0xffff || bus > 0xff || slot > 0x1f || func > 0x7)
> - return -1;
> -
> - if (*e)
> - return -1;
> -
> - *segp = seg;
> - *busp = bus;
> - *slotp = slot;
> - *funcp = func;
> - return 0;
> -}
> -
> int pci_read_devaddr(Monitor *mon, const char *addr, int *domp, int *busp,
> unsigned *slotp)
> {
> diff --git a/hw/pci.h b/hw/pci.h
> index fb84e40..62cf685 100644
> --- a/hw/pci.h
> +++ b/hw/pci.h
> @@ -328,9 +328,6 @@ PCIBus *pci_get_bus_devfn(int *devfnp, const char *devaddr);
> int pci_read_devaddr(Monitor *mon, const char *addr, int *domp, int *busp,
> unsigned *slotp);
>
> -int pci_parse_host_devaddr(const char *addr, int *segp, int *busp,
> - int *slotp, int *funcp);
> -
> void pci_device_deassert_intx(PCIDevice *dev);
>
> typedef DMAContext *(*PCIDMAContextFunc)(PCIBus *, void *, int);
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] pci-assign: Switch to PCI_HOST_DEVADDR property
2012-07-06 16:22 [PATCH] pci-assign: Switch to PCI_HOST_DEVADDR property Jan Kiszka
2012-07-09 15:13 ` Alex Williamson
@ 2012-07-11 10:03 ` Avi Kivity
1 sibling, 0 replies; 3+ messages in thread
From: Avi Kivity @ 2012-07-11 10:03 UTC (permalink / raw)
To: Jan Kiszka; +Cc: Marcelo Tosatti, kvm, Alex Williamson
On 07/06/2012 07:22 PM, Jan Kiszka wrote:
> Replace the home-brewed qdev property for PCI host addresses with the
> new upstream version.
>
Thanks, applied.
--
error compiling committee.c: too many arguments to function
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-07-11 10:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-06 16:22 [PATCH] pci-assign: Switch to PCI_HOST_DEVADDR property Jan Kiszka
2012-07-09 15:13 ` Alex Williamson
2012-07-11 10:03 ` Avi Kivity
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.