[PATCH] gdbstub: Switch to the thread receiving a signal

[PATCH] gdbstub: Switch to the thread receiving a signal

[Pavel Labath]

Respond with Txxthread:yyyy; instead of a plain Sxx to indicate which
thread received the signal. Otherwise, the debugger will associate it
with the main one. Also automatically select this thread, as that is
what gdb expects.

Signed-off-by: Pavel Labath <pavel@labath.sk>
---
 gdbstub.c                                     |  9 ++-
 tests/tcg/multiarch/Makefile.target           |  7 +++
 .../gdbstub/test-thread-breakpoint.py         | 60 +++++++++++++++++++
 3 files changed, 74 insertions(+), 2 deletions(-)
 create mode 100644 tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py

diff --git a/gdbstub.c b/gdbstub.c
index 36b85aa..7bd4479 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -3138,8 +3138,13 @@ gdb_handlesig(CPUState *cpu, int sig)
     tb_flush(cpu);
 
     if (sig != 0) {
-        snprintf(buf, sizeof(buf), "S%02x", target_signal_to_gdb(sig));
-        put_packet(buf);
+        gdbserver_state.c_cpu = cpu;
+        gdbserver_state.g_cpu = cpu;
+        g_string_printf(gdbserver_state.str_buf,
+                        "T%02xthread:", target_signal_to_gdb(sig));
+        gdb_append_thread_id(cpu, gdbserver_state.str_buf);
+        g_string_append_c(gdbserver_state.str_buf, ';');
+        put_strbuf();
     }
     /* put_packet() might have detected that the peer terminated the
        connection.  */
diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
index 85a6fb7..c7b7e8b 100644
--- a/tests/tcg/multiarch/Makefile.target
+++ b/tests/tcg/multiarch/Makefile.target
@@ -73,6 +73,13 @@ run-gdbstub-qxfer-auxv-read: sha1
 		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-qxfer-auxv-read.py, \
 	"basic gdbstub qXfer:auxv:read support")
 
+run-gdbstub-thread-breakpoint: testthread
+	$(call run-test, $@, $(GDB_SCRIPT) \
+		--gdb $(HAVE_GDB_BIN) \
+		--qemu $(QEMU) --qargs "$(QEMU_OPTS)" \
+		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-thread-breakpoint.py, \
+	"hitting a breakpoint on non-main thread")
+
 else
 run-gdbstub-%:
 	$(call skip-test, "gdbstub test $*", "need working gdb")
diff --git a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
new file mode 100644
index 0000000..798d508
--- /dev/null
+++ b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
@@ -0,0 +1,60 @@
+from __future__ import print_function
+#
+# Test auxiliary vector is loaded via gdbstub
+#
+# This is launched via tests/guest-debug/run-test.py
+#
+
+import gdb
+import sys
+
+failcount = 0
+
+def report(cond, msg):
+    "Report success/fail of test"
+    if cond:
+        print ("PASS: %s" % (msg))
+    else:
+        print ("FAIL: %s" % (msg))
+        global failcount
+        failcount += 1
+
+def run_test():
+    "Run through the tests one by one"
+
+    sym, ok = gdb.lookup_symbol("thread1_func")
+    gdb.execute("b thread1_func")
+    gdb.execute("c")
+
+    frame = gdb.selected_frame()
+    report(str(frame.function()) == "thread1_func", "break @ %s"%frame)
+
+#
+# This runs as the script it sourced (via -x, via run-test.py)
+#
+try:
+    inferior = gdb.selected_inferior()
+    arch = inferior.architecture()
+    print("ATTACHED: %s" % arch.name())
+except (gdb.error, AttributeError):
+    print("SKIPPING (not connected)", file=sys.stderr)
+    exit(0)
+
+if gdb.parse_and_eval('$pc') == 0:
+    print("SKIP: PC not set")
+    exit(0)
+
+try:
+    # These are not very useful in scripts
+    gdb.execute("set pagination off")
+    gdb.execute("set confirm off")
+
+    # Run the actual tests
+    run_test()
+except (gdb.error):
+    print ("GDB Exception: %s" % (sys.exc_info()[0]))
+    failcount += 1
+    pass
+
+print("All tests complete: %d failures" % failcount)
+exit(failcount)
-- 
2.32.0

Re: [PATCH] gdbstub: Switch to the thread receiving a signal

[Pavel Labath]

Ping.

(This is my first qemu patch, so please let me know if I am doing 
something wrong.)

regards,
pavel

On 30/09/2021 11:51, Pavel Labath wrote:
> Respond with Txxthread:yyyy; instead of a plain Sxx to indicate which
> thread received the signal. Otherwise, the debugger will associate it
> with the main one. Also automatically select this thread, as that is
> what gdb expects.
> 
> Signed-off-by: Pavel Labath <pavel@labath.sk>
> ---
>   gdbstub.c                                     |  9 ++-
>   tests/tcg/multiarch/Makefile.target           |  7 +++
>   .../gdbstub/test-thread-breakpoint.py         | 60 +++++++++++++++++++
>   3 files changed, 74 insertions(+), 2 deletions(-)
>   create mode 100644 tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> 
> diff --git a/gdbstub.c b/gdbstub.c
> index 36b85aa..7bd4479 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -3138,8 +3138,13 @@ gdb_handlesig(CPUState *cpu, int sig)
>       tb_flush(cpu);
>   
>       if (sig != 0) {
> -        snprintf(buf, sizeof(buf), "S%02x", target_signal_to_gdb(sig));
> -        put_packet(buf);
> +        gdbserver_state.c_cpu = cpu;
> +        gdbserver_state.g_cpu = cpu;
> +        g_string_printf(gdbserver_state.str_buf,
> +                        "T%02xthread:", target_signal_to_gdb(sig));
> +        gdb_append_thread_id(cpu, gdbserver_state.str_buf);
> +        g_string_append_c(gdbserver_state.str_buf, ';');
> +        put_strbuf();
>       }
>       /* put_packet() might have detected that the peer terminated the
>          connection.  */
> diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
> index 85a6fb7..c7b7e8b 100644
> --- a/tests/tcg/multiarch/Makefile.target
> +++ b/tests/tcg/multiarch/Makefile.target
> @@ -73,6 +73,13 @@ run-gdbstub-qxfer-auxv-read: sha1
>   		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-qxfer-auxv-read.py, \
>   	"basic gdbstub qXfer:auxv:read support")
>   
> +run-gdbstub-thread-breakpoint: testthread
> +	$(call run-test, $@, $(GDB_SCRIPT) \
> +		--gdb $(HAVE_GDB_BIN) \
> +		--qemu $(QEMU) --qargs "$(QEMU_OPTS)" \
> +		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-thread-breakpoint.py, \
> +	"hitting a breakpoint on non-main thread")
> +
>   else
>   run-gdbstub-%:
>   	$(call skip-test, "gdbstub test $*", "need working gdb")
> diff --git a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> new file mode 100644
> index 0000000..798d508
> --- /dev/null
> +++ b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> @@ -0,0 +1,60 @@
> +from __future__ import print_function
> +#
> +# Test auxiliary vector is loaded via gdbstub
> +#
> +# This is launched via tests/guest-debug/run-test.py
> +#
> +
> +import gdb
> +import sys
> +
> +failcount = 0
> +
> +def report(cond, msg):
> +    "Report success/fail of test"
> +    if cond:
> +        print ("PASS: %s" % (msg))
> +    else:
> +        print ("FAIL: %s" % (msg))
> +        global failcount
> +        failcount += 1
> +
> +def run_test():
> +    "Run through the tests one by one"
> +
> +    sym, ok = gdb.lookup_symbol("thread1_func")
> +    gdb.execute("b thread1_func")
> +    gdb.execute("c")
> +
> +    frame = gdb.selected_frame()
> +    report(str(frame.function()) == "thread1_func", "break @ %s"%frame)
> +
> +#
> +# This runs as the script it sourced (via -x, via run-test.py)
> +#
> +try:
> +    inferior = gdb.selected_inferior()
> +    arch = inferior.architecture()
> +    print("ATTACHED: %s" % arch.name())
> +except (gdb.error, AttributeError):
> +    print("SKIPPING (not connected)", file=sys.stderr)
> +    exit(0)
> +
> +if gdb.parse_and_eval('$pc') == 0:
> +    print("SKIP: PC not set")
> +    exit(0)
> +
> +try:
> +    # These are not very useful in scripts
> +    gdb.execute("set pagination off")
> +    gdb.execute("set confirm off")
> +
> +    # Run the actual tests
> +    run_test()
> +except (gdb.error):
> +    print ("GDB Exception: %s" % (sys.exc_info()[0]))
> +    failcount += 1
> +    pass
> +
> +print("All tests complete: %d failures" % failcount)
> +exit(failcount)
> 

Re: [PATCH] gdbstub: Switch to the thread receiving a signal

[Alex Bennée]

Pavel Labath <pavel@labath.sk> writes:

> Ping.
>
> (This is my first qemu patch, so please let me know if I am doing
> something wrong.)

Apologies it slipped though the cracks. I shall have a look on Monday.

>
> regards,
> pavel
>
> On 30/09/2021 11:51, Pavel Labath wrote:
>> Respond with Txxthread:yyyy; instead of a plain Sxx to indicate which
>> thread received the signal. Otherwise, the debugger will associate it
>> with the main one. Also automatically select this thread, as that is
>> what gdb expects.
>> Signed-off-by: Pavel Labath <pavel@labath.sk>
>> ---
>>   gdbstub.c                                     |  9 ++-
>>   tests/tcg/multiarch/Makefile.target           |  7 +++
>>   .../gdbstub/test-thread-breakpoint.py         | 60 +++++++++++++++++++
>>   3 files changed, 74 insertions(+), 2 deletions(-)
>>   create mode 100644 tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>> diff --git a/gdbstub.c b/gdbstub.c
>> index 36b85aa..7bd4479 100644
>> --- a/gdbstub.c
>> +++ b/gdbstub.c
>> @@ -3138,8 +3138,13 @@ gdb_handlesig(CPUState *cpu, int sig)
>>       tb_flush(cpu);
>>         if (sig != 0) {
>> -        snprintf(buf, sizeof(buf), "S%02x", target_signal_to_gdb(sig));
>> -        put_packet(buf);
>> +        gdbserver_state.c_cpu = cpu;
>> +        gdbserver_state.g_cpu = cpu;
>> +        g_string_printf(gdbserver_state.str_buf,
>> +                        "T%02xthread:", target_signal_to_gdb(sig));
>> +        gdb_append_thread_id(cpu, gdbserver_state.str_buf);
>> +        g_string_append_c(gdbserver_state.str_buf, ';');
>> +        put_strbuf();
>>       }
>>       /* put_packet() might have detected that the peer terminated the
>>          connection.  */
>> diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
>> index 85a6fb7..c7b7e8b 100644
>> --- a/tests/tcg/multiarch/Makefile.target
>> +++ b/tests/tcg/multiarch/Makefile.target
>> @@ -73,6 +73,13 @@ run-gdbstub-qxfer-auxv-read: sha1
>>   		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-qxfer-auxv-read.py, \
>>   	"basic gdbstub qXfer:auxv:read support")
>>   +run-gdbstub-thread-breakpoint: testthread
>> +	$(call run-test, $@, $(GDB_SCRIPT) \
>> +		--gdb $(HAVE_GDB_BIN) \
>> +		--qemu $(QEMU) --qargs "$(QEMU_OPTS)" \
>> +		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-thread-breakpoint.py, \
>> +	"hitting a breakpoint on non-main thread")
>> +
>>   else
>>   run-gdbstub-%:
>>   	$(call skip-test, "gdbstub test $*", "need working gdb")
>> diff --git a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>> new file mode 100644
>> index 0000000..798d508
>> --- /dev/null
>> +++ b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>> @@ -0,0 +1,60 @@
>> +from __future__ import print_function
>> +#
>> +# Test auxiliary vector is loaded via gdbstub
>> +#
>> +# This is launched via tests/guest-debug/run-test.py
>> +#
>> +
>> +import gdb
>> +import sys
>> +
>> +failcount = 0
>> +
>> +def report(cond, msg):
>> +    "Report success/fail of test"
>> +    if cond:
>> +        print ("PASS: %s" % (msg))
>> +    else:
>> +        print ("FAIL: %s" % (msg))
>> +        global failcount
>> +        failcount += 1
>> +
>> +def run_test():
>> +    "Run through the tests one by one"
>> +
>> +    sym, ok = gdb.lookup_symbol("thread1_func")
>> +    gdb.execute("b thread1_func")
>> +    gdb.execute("c")
>> +
>> +    frame = gdb.selected_frame()
>> +    report(str(frame.function()) == "thread1_func", "break @ %s"%frame)
>> +
>> +#
>> +# This runs as the script it sourced (via -x, via run-test.py)
>> +#
>> +try:
>> +    inferior = gdb.selected_inferior()
>> +    arch = inferior.architecture()
>> +    print("ATTACHED: %s" % arch.name())
>> +except (gdb.error, AttributeError):
>> +    print("SKIPPING (not connected)", file=sys.stderr)
>> +    exit(0)
>> +
>> +if gdb.parse_and_eval('$pc') == 0:
>> +    print("SKIP: PC not set")
>> +    exit(0)
>> +
>> +try:
>> +    # These are not very useful in scripts
>> +    gdb.execute("set pagination off")
>> +    gdb.execute("set confirm off")
>> +
>> +    # Run the actual tests
>> +    run_test()
>> +except (gdb.error):
>> +    print ("GDB Exception: %s" % (sys.exc_info()[0]))
>> +    failcount += 1
>> +    pass
>> +
>> +print("All tests complete: %d failures" % failcount)
>> +exit(failcount)
>> 


-- 
Alex Bennée

Re: [PATCH] gdbstub: Switch to the thread receiving a signal

[Pavel Labath]

On 15/10/2021 17:59, Alex Bennée wrote:
> 
> Pavel Labath <pavel@labath.sk> writes:
> 
>> Ping.
>>
>> (This is my first qemu patch, so please let me know if I am doing
>> something wrong.)
> 
> Apologies it slipped though the cracks. I shall have a look on Monday.
> 

I don't want to impose, but did this get buried over the weekend by any 
chance?

regards,
pl

Re: [PATCH] gdbstub: Switch to the thread receiving a signal

[Alex Bennée]

Pavel Labath <pavel@labath.sk> writes:

> On 15/10/2021 17:59, Alex Bennée wrote:
>> Pavel Labath <pavel@labath.sk> writes:
>> 
>>> Ping.
>>>
>>> (This is my first qemu patch, so please let me know if I am doing
>>> something wrong.)
>> Apologies it slipped though the cracks. I shall have a look on
>> Monday.
>> 
>
> I don't want to impose, but did this get buried over the weekend by
> any chance?

I had a quick look over and made some comments. I haven't been able to
replicate the test manually so far but I might have broken tooling so I
need to dig into that.

>
> regards,
> pl


-- 
Alex Bennée

Re: [PATCH] gdbstub: Switch to the thread receiving a signal

[Alex Bennée]

Pavel Labath <pavel@labath.sk> writes:

> Respond with Txxthread:yyyy; instead of a plain Sxx to indicate which
> thread received the signal. Otherwise, the debugger will associate it
> with the main one. Also automatically select this thread, as that is
> what gdb expects.
>
> Signed-off-by: Pavel Labath <pavel@labath.sk>
> ---
>  gdbstub.c                                     |  9 ++-
>  tests/tcg/multiarch/Makefile.target           |  7 +++
>  .../gdbstub/test-thread-breakpoint.py         | 60 +++++++++++++++++++
>  3 files changed, 74 insertions(+), 2 deletions(-)
>  create mode 100644 tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>
> diff --git a/gdbstub.c b/gdbstub.c
> index 36b85aa..7bd4479 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -3138,8 +3138,13 @@ gdb_handlesig(CPUState *cpu, int sig)
>      tb_flush(cpu);
>  
>      if (sig != 0) {
> -        snprintf(buf, sizeof(buf), "S%02x", target_signal_to_gdb(sig));
> -        put_packet(buf);
> +        gdbserver_state.c_cpu = cpu;
> +        gdbserver_state.g_cpu = cpu;
> +        g_string_printf(gdbserver_state.str_buf,
> +                        "T%02xthread:", target_signal_to_gdb(sig));
> +        gdb_append_thread_id(cpu, gdbserver_state.str_buf);
> +        g_string_append_c(gdbserver_state.str_buf, ';');
> +        put_strbuf();
>      }
>      /* put_packet() might have detected that the peer terminated the
>         connection.  */
> diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
> index 85a6fb7..c7b7e8b 100644
> --- a/tests/tcg/multiarch/Makefile.target
> +++ b/tests/tcg/multiarch/Makefile.target
> @@ -73,6 +73,13 @@ run-gdbstub-qxfer-auxv-read: sha1
>  		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-qxfer-auxv-read.py, \
>  	"basic gdbstub qXfer:auxv:read support")
>  
> +run-gdbstub-thread-breakpoint: testthread
> +	$(call run-test, $@, $(GDB_SCRIPT) \
> +		--gdb $(HAVE_GDB_BIN) \
> +		--qemu $(QEMU) --qargs "$(QEMU_OPTS)" \
> +		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-thread-breakpoint.py, \
> +	"hitting a breakpoint on non-main thread")
> +

You also need to add the test to EXTRA_RUNS here (or just bellow in fact).

>  else
>  run-gdbstub-%:
>  	$(call skip-test, "gdbstub test $*", "need working gdb")
> diff --git a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> new file mode 100644
> index 0000000..798d508
> --- /dev/null
> +++ b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> @@ -0,0 +1,60 @@
> +from __future__ import print_function
> +#
> +# Test auxiliary vector is loaded via gdbstub
> +#
> +# This is launched via tests/guest-debug/run-test.py
> +#
> +
> +import gdb
> +import sys
> +
> +failcount = 0
> +
> +def report(cond, msg):
> +    "Report success/fail of test"
> +    if cond:
> +        print ("PASS: %s" % (msg))
> +    else:
> +        print ("FAIL: %s" % (msg))
> +        global failcount
> +        failcount += 1
> +
> +def run_test():
> +    "Run through the tests one by one"
> +
> +    sym, ok = gdb.lookup_symbol("thread1_func")
> +    gdb.execute("b thread1_func")
> +    gdb.execute("c")
> +
> +    frame = gdb.selected_frame()
> +    report(str(frame.function()) == "thread1_func", "break @
>  %s"%frame)

Does this actually check the correct thread is reported?

> +
> +#
> +# This runs as the script it sourced (via -x, via run-test.py)
> +#
> +try:
> +    inferior = gdb.selected_inferior()
> +    arch = inferior.architecture()
> +    print("ATTACHED: %s" % arch.name())
> +except (gdb.error, AttributeError):
> +    print("SKIPPING (not connected)", file=sys.stderr)
> +    exit(0)
> +
> +if gdb.parse_and_eval('$pc') == 0:
> +    print("SKIP: PC not set")
> +    exit(0)
> +
> +try:
> +    # These are not very useful in scripts
> +    gdb.execute("set pagination off")
> +    gdb.execute("set confirm off")
> +
> +    # Run the actual tests
> +    run_test()
> +except (gdb.error):
> +    print ("GDB Exception: %s" % (sys.exc_info()[0]))
> +    failcount += 1
> +    pass
> +
> +print("All tests complete: %d failures" % failcount)
> +exit(failcount)


-- 
Alex Bennée

Re: [PATCH] gdbstub: Switch to the thread receiving a signal

[Pavel Labath]

Thanks for taking a look. I've sent out a new version of the patch. 
Besides the Makefile change, I have also replaced the direct 
gdbserver_state manipulation with a call to gdb_set_stop_cpu.

Further responses inline.

On 19/10/2021 19:02, Alex Bennée wrote:
> 
> Pavel Labath <pavel@labath.sk> writes:
> 
>> Respond with Txxthread:yyyy; instead of a plain Sxx to indicate which
>> thread received the signal. Otherwise, the debugger will associate it
>> with the main one. Also automatically select this thread, as that is
>> what gdb expects.
>>
>> Signed-off-by: Pavel Labath <pavel@labath.sk>
>> ---
>>   gdbstub.c                                     |  9 ++-
>>   tests/tcg/multiarch/Makefile.target           |  7 +++
>>   .../gdbstub/test-thread-breakpoint.py         | 60 +++++++++++++++++++
>>   3 files changed, 74 insertions(+), 2 deletions(-)
>>   create mode 100644 tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>>
>> diff --git a/gdbstub.c b/gdbstub.c
>> index 36b85aa..7bd4479 100644
>> --- a/gdbstub.c
>> +++ b/gdbstub.c
>> @@ -3138,8 +3138,13 @@ gdb_handlesig(CPUState *cpu, int sig)
>>       tb_flush(cpu);
>>   
>>       if (sig != 0) {
>> -        snprintf(buf, sizeof(buf), "S%02x", target_signal_to_gdb(sig));
>> -        put_packet(buf);
>> +        gdbserver_state.c_cpu = cpu;
>> +        gdbserver_state.g_cpu = cpu;
>> +        g_string_printf(gdbserver_state.str_buf,
>> +                        "T%02xthread:", target_signal_to_gdb(sig));
>> +        gdb_append_thread_id(cpu, gdbserver_state.str_buf);
>> +        g_string_append_c(gdbserver_state.str_buf, ';');
>> +        put_strbuf();
>>       }
>>       /* put_packet() might have detected that the peer terminated the
>>          connection.  */
>> diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
>> index 85a6fb7..c7b7e8b 100644
>> --- a/tests/tcg/multiarch/Makefile.target
>> +++ b/tests/tcg/multiarch/Makefile.target
>> @@ -73,6 +73,13 @@ run-gdbstub-qxfer-auxv-read: sha1
>>   		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-qxfer-auxv-read.py, \
>>   	"basic gdbstub qXfer:auxv:read support")
>>   
>> +run-gdbstub-thread-breakpoint: testthread
>> +	$(call run-test, $@, $(GDB_SCRIPT) \
>> +		--gdb $(HAVE_GDB_BIN) \
>> +		--qemu $(QEMU) --qargs "$(QEMU_OPTS)" \
>> +		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-thread-breakpoint.py, \
>> +	"hitting a breakpoint on non-main thread")
>> +
> 
> You also need to add the test to EXTRA_RUNS here (or just bellow in fact).
Done.

> 
>>   else
>>   run-gdbstub-%:
>>   	$(call skip-test, "gdbstub test $*", "need working gdb")
>> diff --git a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>> new file mode 100644
>> index 0000000..798d508
>> --- /dev/null
>> +++ b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>> @@ -0,0 +1,60 @@
>> +from __future__ import print_function
>> +#
>> +# Test auxiliary vector is loaded via gdbstub
>> +#
>> +# This is launched via tests/guest-debug/run-test.py
>> +#
>> +
>> +import gdb
>> +import sys
>> +
>> +failcount = 0
>> +
>> +def report(cond, msg):
>> +    "Report success/fail of test"
>> +    if cond:
>> +        print ("PASS: %s" % (msg))
>> +    else:
>> +        print ("FAIL: %s" % (msg))
>> +        global failcount
>> +        failcount += 1
>> +
>> +def run_test():
>> +    "Run through the tests one by one"
>> +
>> +    sym, ok = gdb.lookup_symbol("thread1_func")
>> +    gdb.execute("b thread1_func")
>> +    gdb.execute("c")
>> +
>> +    frame = gdb.selected_frame()
>> +    report(str(frame.function()) == "thread1_func", "break @
>>   %s"%frame)
> 
> Does this actually check the correct thread is reported?
It does it indirectly -- there is only one thread which can have 
thread1_func on the stack. If we do not report the correct thread, 
selected_frame() will point into the bowels of pthread_join, as that's 
where the main thread will be stuck at.
I don't know of a direct way to check for the reported thread. 
gdb.selected_thread().name would be more direct, but I am not sure we 
would be able to correctly set the thread name on all supported platforms.

> 
>> +
>> +#
>> +# This runs as the script it sourced (via -x, via run-test.py)
>> +#
>> +try:
>> +    inferior = gdb.selected_inferior()
>> +    arch = inferior.architecture()
>> +    print("ATTACHED: %s" % arch.name())
>> +except (gdb.error, AttributeError):
>> +    print("SKIPPING (not connected)", file=sys.stderr)
>> +    exit(0)
>> +
>> +if gdb.parse_and_eval('$pc') == 0:
>> +    print("SKIP: PC not set")
>> +    exit(0)
>> +
>> +try:
>> +    # These are not very useful in scripts
>> +    gdb.execute("set pagination off")
>> +    gdb.execute("set confirm off")
>> +
>> +    # Run the actual tests
>> +    run_test()
>> +except (gdb.error):
>> +    print ("GDB Exception: %s" % (sys.exc_info()[0]))
>> +    failcount += 1
>> +    pass
>> +
>> +print("All tests complete: %d failures" % failcount)
>> +exit(failcount)
> 
> 

[PATCH v2] gdbstub: Switch to the thread receiving a signal

[Pavel Labath]

Respond with Txxthread:yyyy; instead of a plain Sxx to indicate which
thread received the signal. Otherwise, the debugger will associate it
with the main one. Also automatically select this thread, as that is
what gdb expects.

Signed-off-by: Pavel Labath <pavel@labath.sk>
---
 gdbstub.c                                     |  8 ++-
 tests/tcg/multiarch/Makefile.target           | 10 +++-
 .../gdbstub/test-thread-breakpoint.py         | 60 +++++++++++++++++++
 3 files changed, 75 insertions(+), 3 deletions(-)
 create mode 100644 tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py

diff --git a/gdbstub.c b/gdbstub.c
index 36b85aa..23baaef 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -3138,8 +3138,12 @@ gdb_handlesig(CPUState *cpu, int sig)
     tb_flush(cpu);
 
     if (sig != 0) {
-        snprintf(buf, sizeof(buf), "S%02x", target_signal_to_gdb(sig));
-        put_packet(buf);
+        gdb_set_stop_cpu(cpu);
+        g_string_printf(gdbserver_state.str_buf,
+                        "T%02xthread:", target_signal_to_gdb(sig));
+        gdb_append_thread_id(cpu, gdbserver_state.str_buf);
+        g_string_append_c(gdbserver_state.str_buf, ';');
+        put_strbuf();
     }
     /* put_packet() might have detected that the peer terminated the
        connection.  */
diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
index 6ccb592..c84683f 100644
--- a/tests/tcg/multiarch/Makefile.target
+++ b/tests/tcg/multiarch/Makefile.target
@@ -70,11 +70,19 @@ run-gdbstub-qxfer-auxv-read: sha1
 		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-qxfer-auxv-read.py, \
 	"basic gdbstub qXfer:auxv:read support")
 
+run-gdbstub-thread-breakpoint: testthread
+	$(call run-test, $@, $(GDB_SCRIPT) \
+		--gdb $(HAVE_GDB_BIN) \
+		--qemu $(QEMU) --qargs "$(QEMU_OPTS)" \
+		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-thread-breakpoint.py, \
+	"hitting a breakpoint on non-main thread")
+
 else
 run-gdbstub-%:
 	$(call skip-test, "gdbstub test $*", "need working gdb")
 endif
-EXTRA_RUNS += run-gdbstub-sha1 run-gdbstub-qxfer-auxv-read
+EXTRA_RUNS += run-gdbstub-sha1 run-gdbstub-qxfer-auxv-read \
+	      run-gdbstub-thread-breakpoint
 
 # ARM Compatible Semi Hosting Tests
 #
diff --git a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
new file mode 100644
index 0000000..798d508
--- /dev/null
+++ b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
@@ -0,0 +1,60 @@
+from __future__ import print_function
+#
+# Test auxiliary vector is loaded via gdbstub
+#
+# This is launched via tests/guest-debug/run-test.py
+#
+
+import gdb
+import sys
+
+failcount = 0
+
+def report(cond, msg):
+    "Report success/fail of test"
+    if cond:
+        print ("PASS: %s" % (msg))
+    else:
+        print ("FAIL: %s" % (msg))
+        global failcount
+        failcount += 1
+
+def run_test():
+    "Run through the tests one by one"
+
+    sym, ok = gdb.lookup_symbol("thread1_func")
+    gdb.execute("b thread1_func")
+    gdb.execute("c")
+
+    frame = gdb.selected_frame()
+    report(str(frame.function()) == "thread1_func", "break @ %s"%frame)
+
+#
+# This runs as the script it sourced (via -x, via run-test.py)
+#
+try:
+    inferior = gdb.selected_inferior()
+    arch = inferior.architecture()
+    print("ATTACHED: %s" % arch.name())
+except (gdb.error, AttributeError):
+    print("SKIPPING (not connected)", file=sys.stderr)
+    exit(0)
+
+if gdb.parse_and_eval('$pc') == 0:
+    print("SKIP: PC not set")
+    exit(0)
+
+try:
+    # These are not very useful in scripts
+    gdb.execute("set pagination off")
+    gdb.execute("set confirm off")
+
+    # Run the actual tests
+    run_test()
+except (gdb.error):
+    print ("GDB Exception: %s" % (sys.exc_info()[0]))
+    failcount += 1
+    pass
+
+print("All tests complete: %d failures" % failcount)
+exit(failcount)
-- 
2.32.0

Re: [PATCH v2] gdbstub: Switch to the thread receiving a signal

[Alex Bennée]

Pavel Labath <pavel@labath.sk> writes:

> Respond with Txxthread:yyyy; instead of a plain Sxx to indicate which
> thread received the signal. Otherwise, the debugger will associate it
> with the main one. Also automatically select this thread, as that is
> what gdb expects.

Just for reference it's best to post vN's in a new thread as the
Replied-to field can confuse some of the automatic tools (b4, patchew
etc).

> Signed-off-by: Pavel Labath <pavel@labath.sk>
> ---
>  gdbstub.c                                     |  8 ++-
>  tests/tcg/multiarch/Makefile.target           | 10 +++-
>  .../gdbstub/test-thread-breakpoint.py         | 60 +++++++++++++++++++
>  3 files changed, 75 insertions(+), 3 deletions(-)
>  create mode 100644 tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>
> diff --git a/gdbstub.c b/gdbstub.c
> index 36b85aa..23baaef 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -3138,8 +3138,12 @@ gdb_handlesig(CPUState *cpu, int sig)
>      tb_flush(cpu);
>  
>      if (sig != 0) {
> -        snprintf(buf, sizeof(buf), "S%02x", target_signal_to_gdb(sig));
> -        put_packet(buf);
> +        gdb_set_stop_cpu(cpu);
> +        g_string_printf(gdbserver_state.str_buf,
> +                        "T%02xthread:", target_signal_to_gdb(sig));
> +        gdb_append_thread_id(cpu, gdbserver_state.str_buf);
> +        g_string_append_c(gdbserver_state.str_buf, ';');
> +        put_strbuf();
>      }
>      /* put_packet() might have detected that the peer terminated the
>         connection.  */
> diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
> index 6ccb592..c84683f 100644
> --- a/tests/tcg/multiarch/Makefile.target
> +++ b/tests/tcg/multiarch/Makefile.target
> @@ -70,11 +70,19 @@ run-gdbstub-qxfer-auxv-read: sha1
>  		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-qxfer-auxv-read.py, \
>  	"basic gdbstub qXfer:auxv:read support")
>  
> +run-gdbstub-thread-breakpoint: testthread
> +	$(call run-test, $@, $(GDB_SCRIPT) \
> +		--gdb $(HAVE_GDB_BIN) \
> +		--qemu $(QEMU) --qargs "$(QEMU_OPTS)" \
> +		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-thread-breakpoint.py, \
> +	"hitting a breakpoint on non-main thread")
> +
>  else
>  run-gdbstub-%:
>  	$(call skip-test, "gdbstub test $*", "need working gdb")
>  endif
> -EXTRA_RUNS += run-gdbstub-sha1 run-gdbstub-qxfer-auxv-read
> +EXTRA_RUNS += run-gdbstub-sha1 run-gdbstub-qxfer-auxv-read \
> +	      run-gdbstub-thread-breakpoint
>  
>  # ARM Compatible Semi Hosting Tests
>  #
> diff --git a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> new file mode 100644
> index 0000000..798d508
> --- /dev/null
> +++ b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
> @@ -0,0 +1,60 @@
> +from __future__ import print_function
> +#
> +# Test auxiliary vector is loaded via gdbstub

I'm fairly sure this isn't what the test is doing...

> +#
> +# This is launched via tests/guest-debug/run-test.py
> +#
> +
> +import gdb
> +import sys
> +
> +failcount = 0
> +
> +def report(cond, msg):
> +    "Report success/fail of test"
> +    if cond:
> +        print ("PASS: %s" % (msg))
> +    else:
> +        print ("FAIL: %s" % (msg))
> +        global failcount
> +        failcount += 1
> +
> +def run_test():
> +    "Run through the tests one by one"
> +
> +    sym, ok = gdb.lookup_symbol("thread1_func")
> +    gdb.execute("b thread1_func")
> +    gdb.execute("c")
> +
> +    frame = gdb.selected_frame()
> +    report(str(frame.function()) == "thread1_func", "break @
> %s"%frame)

I think we can do better here by checking gdb.selected_thread() and
ensuring the num (or global_num) is not 1. Also maybe check the
is_stopped() status:

  https://sourceware.org/gdb/current/onlinedocs/gdb/Threads-In-Python.html

I noticed while running the test that output still continued for some
time from the other thread but it was still doing that pre this change
so I'm not quite sure what was going on there.

> +
> +#
> +# This runs as the script it sourced (via -x, via run-test.py)
> +#
> +try:
> +    inferior = gdb.selected_inferior()
> +    arch = inferior.architecture()
> +    print("ATTACHED: %s" % arch.name())
> +except (gdb.error, AttributeError):
> +    print("SKIPPING (not connected)", file=sys.stderr)
> +    exit(0)
> +
> +if gdb.parse_and_eval('$pc') == 0:
> +    print("SKIP: PC not set")
> +    exit(0)
> +
> +try:
> +    # These are not very useful in scripts
> +    gdb.execute("set pagination off")
> +    gdb.execute("set confirm off")
> +
> +    # Run the actual tests
> +    run_test()
> +except (gdb.error):
> +    print ("GDB Exception: %s" % (sys.exc_info()[0]))
> +    failcount += 1
> +    pass
> +
> +print("All tests complete: %d failures" % failcount)
> +exit(failcount)

I also tried some manual testing:

  ➜  ./qemu-aarch64 -g 1234 tests/tcg/aarch64-linux-user/testthread
  fish: “./qemu-aarch64 -g 1234 tests/tc…” terminated by signal SIGSEGV (Address boundary error)
  🕙12:33:49 alex@zen:qemu.git/builds/arm.all  on  gdbstub/next [$!?⇡] took 12s [⚡ SEGV] 
  ✗

where in the other window I did:

  0x00000000004005d0 in _start ()
  (gdb) hbreak thread2_func
  Hardware assisted breakpoint 1 at 0x400824: file /home/alex/lsrc/qemu.git/tests/tcg/multiarch/testthread.c, line 34.
  (gdb) hbreak thread1_func
  Hardware assisted breakpoint 2 at 0x400798: file /home/alex/lsrc/qemu.git/tests/tcg/multiarch/testthread.c, line 22.
  (gdb) c
  Continuing.
  [New Thread 1.2748248]
  Remote connection closed

which seems to indicate some problems with breaking on multiple threads.
Maybe this is related to the weird output I was seeing above?

-- 
Alex Bennée

Re: [PATCH v2] gdbstub: Switch to the thread receiving a signal

[Pavel Labath]

On 20/10/2021 10:35, Alex Bennée wrote:
> 
> Pavel Labath <pavel@labath.sk> writes:
> 
>> Respond with Txxthread:yyyy; instead of a plain Sxx to indicate which
>> thread received the signal. Otherwise, the debugger will associate it
>> with the main one. Also automatically select this thread, as that is
>> what gdb expects.
> 
> Just for reference it's best to post vN's in a new thread as the
> Replied-to field can confuse some of the automatic tools (b4, patchew
> etc).

Got it.
> 
>> Signed-off-by: Pavel Labath <pavel@labath.sk>
>> ---
>>   gdbstub.c                                     |  8 ++-
>>   tests/tcg/multiarch/Makefile.target           | 10 +++-
>>   .../gdbstub/test-thread-breakpoint.py         | 60 +++++++++++++++++++
>>   3 files changed, 75 insertions(+), 3 deletions(-)
>>   create mode 100644 tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>>
>> diff --git a/gdbstub.c b/gdbstub.c
>> index 36b85aa..23baaef 100644
>> --- a/gdbstub.c
>> +++ b/gdbstub.c
>> @@ -3138,8 +3138,12 @@ gdb_handlesig(CPUState *cpu, int sig)
>>       tb_flush(cpu);
>>   
>>       if (sig != 0) {
>> -        snprintf(buf, sizeof(buf), "S%02x", target_signal_to_gdb(sig));
>> -        put_packet(buf);
>> +        gdb_set_stop_cpu(cpu);
>> +        g_string_printf(gdbserver_state.str_buf,
>> +                        "T%02xthread:", target_signal_to_gdb(sig));
>> +        gdb_append_thread_id(cpu, gdbserver_state.str_buf);
>> +        g_string_append_c(gdbserver_state.str_buf, ';');
>> +        put_strbuf();
>>       }
>>       /* put_packet() might have detected that the peer terminated the
>>          connection.  */
>> diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
>> index 6ccb592..c84683f 100644
>> --- a/tests/tcg/multiarch/Makefile.target
>> +++ b/tests/tcg/multiarch/Makefile.target
>> @@ -70,11 +70,19 @@ run-gdbstub-qxfer-auxv-read: sha1
>>   		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-qxfer-auxv-read.py, \
>>   	"basic gdbstub qXfer:auxv:read support")
>>   
>> +run-gdbstub-thread-breakpoint: testthread
>> +	$(call run-test, $@, $(GDB_SCRIPT) \
>> +		--gdb $(HAVE_GDB_BIN) \
>> +		--qemu $(QEMU) --qargs "$(QEMU_OPTS)" \
>> +		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-thread-breakpoint.py, \
>> +	"hitting a breakpoint on non-main thread")
>> +
>>   else
>>   run-gdbstub-%:
>>   	$(call skip-test, "gdbstub test $*", "need working gdb")
>>   endif
>> -EXTRA_RUNS += run-gdbstub-sha1 run-gdbstub-qxfer-auxv-read
>> +EXTRA_RUNS += run-gdbstub-sha1 run-gdbstub-qxfer-auxv-read \
>> +	      run-gdbstub-thread-breakpoint
>>   
>>   # ARM Compatible Semi Hosting Tests
>>   #
>> diff --git a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>> new file mode 100644
>> index 0000000..798d508
>> --- /dev/null
>> +++ b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>> @@ -0,0 +1,60 @@
>> +from __future__ import print_function
>> +#
>> +# Test auxiliary vector is loaded via gdbstub
> 
> I'm fairly sure this isn't what the test is doing...
Oops. I'll fix this in the next version.

> 
>> +#
>> +# This is launched via tests/guest-debug/run-test.py
>> +#
>> +
>> +import gdb
>> +import sys
>> +
>> +failcount = 0
>> +
>> +def report(cond, msg):
>> +    "Report success/fail of test"
>> +    if cond:
>> +        print ("PASS: %s" % (msg))
>> +    else:
>> +        print ("FAIL: %s" % (msg))
>> +        global failcount
>> +        failcount += 1
>> +
>> +def run_test():
>> +    "Run through the tests one by one"
>> +
>> +    sym, ok = gdb.lookup_symbol("thread1_func")
>> +    gdb.execute("b thread1_func")
>> +    gdb.execute("c")
>> +
>> +    frame = gdb.selected_frame()
>> +    report(str(frame.function()) == "thread1_func", "break @
>> %s"%frame)
> 
> I think we can do better here by checking gdb.selected_thread() and
> ensuring the num (or global_num) is not 1. Also maybe check the
> is_stopped() status:

Checking `num` is a good idea. Checking is_stopped() doesn't hurt 
either, though I believe that (in all-stop mode) gdb just hardwires this 
to True for all threads, even those that are not actually stopped (more 
on that below).

However, if that's ok with you, I think it'd still be nice to keep the 
frame check as well.
> 
>    https://sourceware.org/gdb/current/onlinedocs/gdb/Threads-In-Python.html
> 
> I noticed while running the test that output still continued for some
> time from the other thread but it was still doing that pre this change
> so I'm not quite sure what was going on there.
> 
>> +
>> +#
>> +# This runs as the script it sourced (via -x, via run-test.py)
>> +#
>> +try:
>> +    inferior = gdb.selected_inferior()
>> +    arch = inferior.architecture()
>> +    print("ATTACHED: %s" % arch.name())
>> +except (gdb.error, AttributeError):
>> +    print("SKIPPING (not connected)", file=sys.stderr)
>> +    exit(0)
>> +
>> +if gdb.parse_and_eval('$pc') == 0:
>> +    print("SKIP: PC not set")
>> +    exit(0)
>> +
>> +try:
>> +    # These are not very useful in scripts
>> +    gdb.execute("set pagination off")
>> +    gdb.execute("set confirm off")
>> +
>> +    # Run the actual tests
>> +    run_test()
>> +except (gdb.error):
>> +    print ("GDB Exception: %s" % (sys.exc_info()[0]))
>> +    failcount += 1
>> +    pass
>> +
>> +print("All tests complete: %d failures" % failcount)
>> +exit(failcount)
> 
> I also tried some manual testing:
> 
>    ➜  ./qemu-aarch64 -g 1234 tests/tcg/aarch64-linux-user/testthread
>    fish: “./qemu-aarch64 -g 1234 tests/tc…” terminated by signal SIGSEGV (Address boundary error)
>    🕙12:33:49 alex@zen:qemu.git/builds/arm.all  on  gdbstub/next [$!?⇡] took 12s [⚡ SEGV]
>    ✗
> 
> where in the other window I did:
> 
>    0x00000000004005d0 in _start ()
>    (gdb) hbreak thread2_func
>    Hardware assisted breakpoint 1 at 0x400824: file /home/alex/lsrc/qemu.git/tests/tcg/multiarch/testthread.c, line 34.
>    (gdb) hbreak thread1_func
>    Hardware assisted breakpoint 2 at 0x400798: file /home/alex/lsrc/qemu.git/tests/tcg/multiarch/testthread.c, line 22.
>    (gdb) c
>    Continuing.
>    [New Thread 1.2748248]
>    Remote connection closed
> 
> which seems to indicate some problems with breaking on multiple threads.
> Maybe this is related to the weird output I was seeing above?
> 

Yes, that's definitely related. What's happening is that the qemu does 
not stop other thread when one of them hits a breakpoint (or stops for 
any other reason) -- as far as I can tell it does not have any code 
which would even attempt to do that. This is why you're seeing the 
output even after the process is purportedly stopped.

Things get even more interesting when you have two threads hitting a 
breakpoint simultaneously. At that point both of them will enter their 
gdb stubs and attempt to talk to gdb at the same time. As you can 
imagine, this cannot end well, and eventually the connection will become 
so messed up that one side just gives up and terminates the link.

I am aware of this issue, and I (well, Stan (cc'ed) is, for the most 
part) looking for a way to fix it. If you have any ideas, we'd very much 
like to hear them. The way I see it, we need to implement some kind of a 
"stop the world" mechanism, to stop/interrupt all threads whenever the 
gdb stub becomes active (and make sure it can handle simultaneous debug 
events). However, I am don't know enough about qemu internals to tell 
how to actually go about doing that.

My plan was to "get my feet wet" with a simple patch that improves the 
situation for the case when there are no simultaneous debug events, and 
eventually hopefully figure out a way how to address the bigger problem.

regards,
Pavel

Re: [PATCH v2] gdbstub: Switch to the thread receiving a signal

[Alex Bennée]

Pavel Labath <pavel@labath.sk> writes:

> On 20/10/2021 10:35, Alex Bennée wrote:
>> Pavel Labath <pavel@labath.sk> writes:
>> 
>>> Respond with Txxthread:yyyy; instead of a plain Sxx to indicate which
>>> thread received the signal. Otherwise, the debugger will associate it
>>> with the main one. Also automatically select this thread, as that is
>>> what gdb expects.
>> Just for reference it's best to post vN's in a new thread as the
>> Replied-to field can confuse some of the automatic tools (b4, patchew
>> etc).
>
> Got it.
>> 
>>> Signed-off-by: Pavel Labath <pavel@labath.sk>
>>> ---
>>>   gdbstub.c                                     |  8 ++-
>>>   tests/tcg/multiarch/Makefile.target           | 10 +++-
>>>   .../gdbstub/test-thread-breakpoint.py         | 60 +++++++++++++++++++
>>>   3 files changed, 75 insertions(+), 3 deletions(-)
>>>   create mode 100644 tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>>>
>>> diff --git a/gdbstub.c b/gdbstub.c
>>> index 36b85aa..23baaef 100644
>>> --- a/gdbstub.c
>>> +++ b/gdbstub.c
>>> @@ -3138,8 +3138,12 @@ gdb_handlesig(CPUState *cpu, int sig)
>>>       tb_flush(cpu);
>>>         if (sig != 0) {
>>> -        snprintf(buf, sizeof(buf), "S%02x", target_signal_to_gdb(sig));
>>> -        put_packet(buf);
>>> +        gdb_set_stop_cpu(cpu);
>>> +        g_string_printf(gdbserver_state.str_buf,
>>> +                        "T%02xthread:", target_signal_to_gdb(sig));
>>> +        gdb_append_thread_id(cpu, gdbserver_state.str_buf);
>>> +        g_string_append_c(gdbserver_state.str_buf, ';');
>>> +        put_strbuf();
>>>       }
>>>       /* put_packet() might have detected that the peer terminated the
>>>          connection.  */
>>> diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target
>>> index 6ccb592..c84683f 100644
>>> --- a/tests/tcg/multiarch/Makefile.target
>>> +++ b/tests/tcg/multiarch/Makefile.target
>>> @@ -70,11 +70,19 @@ run-gdbstub-qxfer-auxv-read: sha1
>>>   		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-qxfer-auxv-read.py, \
>>>   	"basic gdbstub qXfer:auxv:read support")
>>>   +run-gdbstub-thread-breakpoint: testthread
>>> +	$(call run-test, $@, $(GDB_SCRIPT) \
>>> +		--gdb $(HAVE_GDB_BIN) \
>>> +		--qemu $(QEMU) --qargs "$(QEMU_OPTS)" \
>>> +		--bin $< --test $(MULTIARCH_SRC)/gdbstub/test-thread-breakpoint.py, \
>>> +	"hitting a breakpoint on non-main thread")
>>> +
>>>   else
>>>   run-gdbstub-%:
>>>   	$(call skip-test, "gdbstub test $*", "need working gdb")
>>>   endif
>>> -EXTRA_RUNS += run-gdbstub-sha1 run-gdbstub-qxfer-auxv-read
>>> +EXTRA_RUNS += run-gdbstub-sha1 run-gdbstub-qxfer-auxv-read \
>>> +	      run-gdbstub-thread-breakpoint
>>>     # ARM Compatible Semi Hosting Tests
>>>   #
>>> diff --git a/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>>> new file mode 100644
>>> index 0000000..798d508
>>> --- /dev/null
>>> +++ b/tests/tcg/multiarch/gdbstub/test-thread-breakpoint.py
>>> @@ -0,0 +1,60 @@
>>> +from __future__ import print_function
>>> +#
>>> +# Test auxiliary vector is loaded via gdbstub
>> I'm fairly sure this isn't what the test is doing...
> Oops. I'll fix this in the next version.
>
>> 
>>> +#
>>> +# This is launched via tests/guest-debug/run-test.py
>>> +#
>>> +
>>> +import gdb
>>> +import sys
>>> +
>>> +failcount = 0
>>> +
>>> +def report(cond, msg):
>>> +    "Report success/fail of test"
>>> +    if cond:
>>> +        print ("PASS: %s" % (msg))
>>> +    else:
>>> +        print ("FAIL: %s" % (msg))
>>> +        global failcount
>>> +        failcount += 1
>>> +
>>> +def run_test():
>>> +    "Run through the tests one by one"
>>> +
>>> +    sym, ok = gdb.lookup_symbol("thread1_func")
>>> +    gdb.execute("b thread1_func")
>>> +    gdb.execute("c")
>>> +
>>> +    frame = gdb.selected_frame()
>>> +    report(str(frame.function()) == "thread1_func", "break @
>>> %s"%frame)
>> I think we can do better here by checking gdb.selected_thread() and
>> ensuring the num (or global_num) is not 1. Also maybe check the
>> is_stopped() status:
>
> Checking `num` is a good idea. Checking is_stopped() doesn't hurt
> either, though I believe that (in all-stop mode) gdb just hardwires
> this to True for all threads, even those that are not actually stopped
> (more on that below).
>
> However, if that's ok with you, I think it'd still be nice to keep the
> frame check as well.

That's fine.

>>    https://sourceware.org/gdb/current/onlinedocs/gdb/Threads-In-Python.html
>> I noticed while running the test that output still continued for
>> some
>> time from the other thread but it was still doing that pre this change
>> so I'm not quite sure what was going on there.
>> 
>>> +
>>> +#
>>> +# This runs as the script it sourced (via -x, via run-test.py)
>>> +#
>>> +try:
>>> +    inferior = gdb.selected_inferior()
>>> +    arch = inferior.architecture()
>>> +    print("ATTACHED: %s" % arch.name())
>>> +except (gdb.error, AttributeError):
>>> +    print("SKIPPING (not connected)", file=sys.stderr)
>>> +    exit(0)
>>> +
>>> +if gdb.parse_and_eval('$pc') == 0:
>>> +    print("SKIP: PC not set")
>>> +    exit(0)
>>> +
>>> +try:
>>> +    # These are not very useful in scripts
>>> +    gdb.execute("set pagination off")
>>> +    gdb.execute("set confirm off")
>>> +
>>> +    # Run the actual tests
>>> +    run_test()
>>> +except (gdb.error):
>>> +    print ("GDB Exception: %s" % (sys.exc_info()[0]))
>>> +    failcount += 1
>>> +    pass
>>> +
>>> +print("All tests complete: %d failures" % failcount)
>>> +exit(failcount)
>> I also tried some manual testing:
>>    ➜  ./qemu-aarch64 -g 1234 tests/tcg/aarch64-linux-user/testthread
>>    fish: “./qemu-aarch64 -g 1234 tests/tc…” terminated by signal SIGSEGV (Address boundary error)
>>    🕙12:33:49 alex@zen:qemu.git/builds/arm.all  on  gdbstub/next [$!?⇡] took 12s [⚡ SEGV]
>>    ✗
>> where in the other window I did:
>>    0x00000000004005d0 in _start ()
>>    (gdb) hbreak thread2_func
>>    Hardware assisted breakpoint 1 at 0x400824: file /home/alex/lsrc/qemu.git/tests/tcg/multiarch/testthread.c, line 34.
>>    (gdb) hbreak thread1_func
>>    Hardware assisted breakpoint 2 at 0x400798: file /home/alex/lsrc/qemu.git/tests/tcg/multiarch/testthread.c, line 22.
>>    (gdb) c
>>    Continuing.
>>    [New Thread 1.2748248]
>>    Remote connection closed
>> which seems to indicate some problems with breaking on multiple
>> threads.
>> Maybe this is related to the weird output I was seeing above?
>> 
>
> Yes, that's definitely related. What's happening is that the qemu does
> not stop other thread when one of them hits a breakpoint (or stops for
> any other reason) -- as far as I can tell it does not have any code
> which would even attempt to do that. This is why you're seeing the
> output even after the process is purportedly stopped.
>
> Things get even more interesting when you have two threads hitting a
> breakpoint simultaneously. At that point both of them will enter their
> gdb stubs and attempt to talk to gdb at the same time. As you can
> imagine, this cannot end well, and eventually the connection will
> become so messed up that one side just gives up and terminates the
> link.
>
> I am aware of this issue, and I (well, Stan (cc'ed) is, for the most
> part) looking for a way to fix it. If you have any ideas, we'd very
> much like to hear them. The way I see it, we need to implement some
> kind of a "stop the world" mechanism, to stop/interrupt all threads
> whenever the gdb stub becomes active (and make sure it can handle
> simultaneous debug events).

vm_stop(RUN_STATE_PAUSED) should do the trick. We do it elsewhere in
the gdbstub.

> However, I am don't know enough about qemu
> internals to tell how to actually go about doing that.
>
> My plan was to "get my feet wet" with a simple patch that improves the
> situation for the case when there are no simultaneous debug events,
> and eventually hopefully figure out a way how to address the bigger
> problem.

Great. Once you've made the changes I think the patch is ready to go in
and the larger questions can be dealt with later.

>
> regards,
> Pavel


-- 
Alex Bennée

Re: [PATCH v2] gdbstub: Switch to the thread receiving a signal

[Pavel Labath]

On 20/10/2021 19:57, Alex Bennée wrote:
> 
> Pavel Labath <pavel@labath.sk> writes:
> 
>> On 20/10/2021 10:35, Alex Bennée wrote:
>>> Maybe this is related to the weird output I was seeing above?
>>>
>>
>> Yes, that's definitely related. What's happening is that the qemu does
>> not stop other thread when one of them hits a breakpoint (or stops for
>> any other reason) -- as far as I can tell it does not have any code
>> which would even attempt to do that. This is why you're seeing the
>> output even after the process is purportedly stopped.
>>
>> Things get even more interesting when you have two threads hitting a
>> breakpoint simultaneously. At that point both of them will enter their
>> gdb stubs and attempt to talk to gdb at the same time. As you can
>> imagine, this cannot end well, and eventually the connection will
>> become so messed up that one side just gives up and terminates the
>> link.
>>
>> I am aware of this issue, and I (well, Stan (cc'ed) is, for the most
>> part) looking for a way to fix it. If you have any ideas, we'd very
>> much like to hear them. The way I see it, we need to implement some
>> kind of a "stop the world" mechanism, to stop/interrupt all threads
>> whenever the gdb stub becomes active (and make sure it can handle
>> simultaneous debug events).
> 
> vm_stop(RUN_STATE_PAUSED) should do the trick. We do it elsewhere in
> the gdbstub.
Unfortunately, it seems that vm_stop is only available in softmmu 
targets. Is there a user-mode equivalent by any chance?

> 
>> However, I am don't know enough about qemu
>> internals to tell how to actually go about doing that.
>>
>> My plan was to "get my feet wet" with a simple patch that improves the
>> situation for the case when there are no simultaneous debug events,
>> and eventually hopefully figure out a way how to address the bigger
>> problem.
> 
> Great. Once you've made the changes I think the patch is ready to go in
> and the larger questions can be dealt with later.

Cool. I've sent out v3 of the patch. Let me know if there's anything 
else I need to do.

regards,
Pavel