All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robin Murphy <robin.murphy@arm.com>
To: John Garry <john.garry@huawei.com>, joro@8bytes.org, will@kernel.org
Cc: iommu@lists.linux-foundation.org, suravee.suthikulpanit@amd.com,
	baolu.lu@linux.intel.com, willy@infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/9] iommu: Refactor flush queues into iommu-dma
Date: Wed, 24 Nov 2021 18:33:15 +0000	[thread overview]
Message-ID: <4bce6339-095f-a7cb-fb7c-436b8ece9588@arm.com> (raw)
In-Reply-To: <7f7daf42-8aff-b9ed-0f48-d4158896012e@huawei.com>

On 2021-11-24 17:21, John Garry wrote:
> On 23/11/2021 14:10, Robin Murphy wrote:
>> As promised, this series cleans up the flush queue code and streamlines
>> it directly into iommu-dma. Since we no longer have per-driver DMA ops
>> implementations, a lot of the abstraction is now no longer necessary, so
>> there's a nice degree of simplification in the process. Un-abstracting
>> the queued page freeing mechanism is also the perfect opportunity to
>> revise which struct page fields we use so we can be better-behaved
>> from the MM point of view, thanks to Matthew.
>>
>> These changes should also make it viable to start using the gather
>> freelist in io-pgtable-arm, and eliminate some more synchronous
>> invalidations from the normal flow there, but that is proving to need a
>> bit more careful thought than I have time for in this cycle, so I've
>> parked that again for now and will revisit it in the new year.
>>
>> For convenience, branch at:
>>    https://gitlab.arm.com/linux-arm/linux-rm/-/tree/iommu/iova
>>
>> I've build-tested for x86_64, and boot-tested arm64 to the point of
>> confirming that put_pages_list() gets passed a valid empty list when
>> flushing, while everything else still works.
> My interest is in patches 2, 3, 7, 8, 9, and they look ok. I did a bit 
> of testing for strict and non-strict mode on my arm64 system and no 
> problems.
> 
> Apart from this, I noticed that one possible optimization could be to 
> avoid so many reads of fq_flush_finish_cnt, as we seem to have a pattern 
> of fq_flush_iotlb()->atomic64_inc(fq_flush_finish_cnt) followed by a 
> read of fq_flush_finish_cnt in fq_ring_free(), so we could use 
> atomic64_inc_return(fq_flush_finish_cnt) and reuse the value. I think 
> that any racing in fq_flush_finish_cnt accesses are latent, but maybe 
> there is a flaw in this. However I tried something along these lines and 
> got a 2.4% throughput gain for my storage scenario.

Yes, that sounds reasonable - off-hand I can't see that there's any more 
potential for harmful races either. All that jumps out is the case where 
the flush count gets bumped via queue_iova() while another CPU is 
already running fq_flush_timeout(), where freeing newer IOVAs added 
since the timeout is then more likely to be left to the local CPU, or 
postponed until the next flush cycle entirely, rather than being piled 
on to the guy already processing the for_each_possible_cpu() loop. And I 
can't help thinking that could only be a *good* thing, given how the FQ 
timeout seems to be a smoking gun in your "performance never recovers 
after falling off the cliff" scenario :)

Robin.

WARNING: multiple messages have this Message-ID (diff)
From: Robin Murphy <robin.murphy@arm.com>
To: John Garry <john.garry@huawei.com>, joro@8bytes.org, will@kernel.org
Cc: linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org,
	willy@infradead.org
Subject: Re: [PATCH 0/9] iommu: Refactor flush queues into iommu-dma
Date: Wed, 24 Nov 2021 18:33:15 +0000	[thread overview]
Message-ID: <4bce6339-095f-a7cb-fb7c-436b8ece9588@arm.com> (raw)
In-Reply-To: <7f7daf42-8aff-b9ed-0f48-d4158896012e@huawei.com>

On 2021-11-24 17:21, John Garry wrote:
> On 23/11/2021 14:10, Robin Murphy wrote:
>> As promised, this series cleans up the flush queue code and streamlines
>> it directly into iommu-dma. Since we no longer have per-driver DMA ops
>> implementations, a lot of the abstraction is now no longer necessary, so
>> there's a nice degree of simplification in the process. Un-abstracting
>> the queued page freeing mechanism is also the perfect opportunity to
>> revise which struct page fields we use so we can be better-behaved
>> from the MM point of view, thanks to Matthew.
>>
>> These changes should also make it viable to start using the gather
>> freelist in io-pgtable-arm, and eliminate some more synchronous
>> invalidations from the normal flow there, but that is proving to need a
>> bit more careful thought than I have time for in this cycle, so I've
>> parked that again for now and will revisit it in the new year.
>>
>> For convenience, branch at:
>>    https://gitlab.arm.com/linux-arm/linux-rm/-/tree/iommu/iova
>>
>> I've build-tested for x86_64, and boot-tested arm64 to the point of
>> confirming that put_pages_list() gets passed a valid empty list when
>> flushing, while everything else still works.
> My interest is in patches 2, 3, 7, 8, 9, and they look ok. I did a bit 
> of testing for strict and non-strict mode on my arm64 system and no 
> problems.
> 
> Apart from this, I noticed that one possible optimization could be to 
> avoid so many reads of fq_flush_finish_cnt, as we seem to have a pattern 
> of fq_flush_iotlb()->atomic64_inc(fq_flush_finish_cnt) followed by a 
> read of fq_flush_finish_cnt in fq_ring_free(), so we could use 
> atomic64_inc_return(fq_flush_finish_cnt) and reuse the value. I think 
> that any racing in fq_flush_finish_cnt accesses are latent, but maybe 
> there is a flaw in this. However I tried something along these lines and 
> got a 2.4% throughput gain for my storage scenario.

Yes, that sounds reasonable - off-hand I can't see that there's any more 
potential for harmful races either. All that jumps out is the case where 
the flush count gets bumped via queue_iova() while another CPU is 
already running fq_flush_timeout(), where freeing newer IOVAs added 
since the timeout is then more likely to be left to the local CPU, or 
postponed until the next flush cycle entirely, rather than being piled 
on to the guy already processing the for_each_possible_cpu() loop. And I 
can't help thinking that could only be a *good* thing, given how the FQ 
timeout seems to be a smoking gun in your "performance never recovers 
after falling off the cliff" scenario :)

Robin.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply	other threads:[~2021-11-24 18:33 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-23 14:10 [PATCH 0/9] iommu: Refactor flush queues into iommu-dma Robin Murphy
2021-11-23 14:10 ` Robin Murphy
2021-11-23 14:10 ` [PATCH 1/9] gpu: host1x: Add missing DMA API include Robin Murphy
2021-11-23 14:10   ` Robin Murphy
2021-11-23 14:10   ` Robin Murphy
2021-11-24 14:05   ` Robin Murphy
2021-11-24 14:05     ` Robin Murphy
2021-11-24 14:05     ` Robin Murphy
2021-12-06 12:20     ` Joerg Roedel
2021-12-06 12:20       ` Joerg Roedel
2021-12-06 12:20       ` Joerg Roedel
2021-11-23 14:10 ` [PATCH 2/9] iommu/iova: Squash entry_dtor abstraction Robin Murphy
2021-11-23 14:10   ` Robin Murphy
2021-11-23 14:10 ` [PATCH 3/9] iommu/iova: Squash flush_cb abstraction Robin Murphy
2021-11-23 14:10   ` Robin Murphy
2021-11-23 14:10 ` [PATCH 4/9] iommu/amd: Simplify pagetable freeing Robin Murphy
2021-11-23 14:10   ` Robin Murphy
2021-12-06 12:40   ` Joerg Roedel
2021-12-06 12:40     ` Joerg Roedel
2021-12-06 13:28     ` Robin Murphy
2021-12-06 13:28       ` Robin Murphy
2021-11-23 14:10 ` [PATCH 5/9] iommu/amd: Use put_pages_list Robin Murphy
2021-11-23 14:10   ` Robin Murphy
2021-11-23 14:10 ` [PATCH 6/9] iommu/vt-d: " Robin Murphy
2021-11-23 14:10   ` Robin Murphy
2021-11-23 14:10 ` [PATCH 7/9] iommu/iova: Consolidate flush queue code Robin Murphy
2021-11-23 14:10   ` Robin Murphy
2021-11-23 14:10 ` [PATCH 8/9] iommu/iova: Move flush queue code to iommu-dma Robin Murphy
2021-11-23 14:10   ` Robin Murphy
2021-11-23 14:10 ` [PATCH 9/9] iommu: Move flush queue data into iommu_dma_cookie Robin Murphy
2021-11-23 14:10   ` Robin Murphy
2021-11-23 22:40   ` kernel test robot
2021-11-23 22:40     ` kernel test robot
2021-11-23 22:40     ` kernel test robot
2021-11-24 17:25   ` John Garry
2021-11-24 17:25     ` John Garry via iommu
2021-11-24 18:00     ` Robin Murphy
2021-11-24 18:00       ` Robin Murphy
2021-11-24 17:21 ` [PATCH 0/9] iommu: Refactor flush queues into iommu-dma John Garry
2021-11-24 17:21   ` John Garry via iommu
2021-11-24 18:33   ` Robin Murphy [this message]
2021-11-24 18:33     ` Robin Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4bce6339-095f-a7cb-fb7c-436b8ece9588@arm.com \
    --to=robin.murphy@arm.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=john.garry@huawei.com \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=suravee.suthikulpanit@amd.com \
    --cc=will@kernel.org \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.