* [PATCH 5/9 v3] Initial commit to support NetUP Dual DVB-T/C CI RF card.
@ 2011-01-25 20:04 Igor M. Liplianin
0 siblings, 0 replies; only message in thread
From: Igor M. Liplianin @ 2011-01-25 20:04 UTC (permalink / raw)
To: mchehab, linux-media, linux-kernel
The card based on cx23885 PCI-e brige. Altera FPGA for CI,
multistandard demods stv0367 from STM for QAM & OFDM, Xcieve xc5000 tuners
and additional cx25840 for second analog input.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
---
drivers/media/dvb/frontends/stv0367.h | 4 +-
drivers/media/video/cx23885/Kconfig | 3 +-
drivers/media/video/cx23885/cx23885-cards.c | 103 ++++++++++++++++-
drivers/media/video/cx23885/cx23885-core.c | 22 ++--
drivers/media/video/cx23885/cx23885-dvb.c | 172 +++++++++++++++++++++++++-
drivers/media/video/cx23885/cx23885.h | 4 +-
6 files changed, 286 insertions(+), 22 deletions(-)
diff --git a/drivers/media/dvb/frontends/stv0367.h b/drivers/media/dvb/frontends/stv0367.h
index 822a8e9..93cc4a5 100644
--- a/drivers/media/dvb/frontends/stv0367.h
+++ b/drivers/media/dvb/frontends/stv0367.h
@@ -4,8 +4,8 @@
* Driver for ST STV0367 DVB-T & DVB-C demodulator IC.
*
* Copyright (C) ST Microelectronics.
- * Copyright (C) 2010 NetUP Inc.
- * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru>
+ * Copyright (C) 2010,2011 NetUP Inc.
+ * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 5e5faad..3b6e7f2 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -1,6 +1,7 @@
config VIDEO_CX23885
tristate "Conexant cx23885 (2388x successor) support"
- depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT
+ depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT && SND
+ select SND_PCM
select I2C_ALGOBIT
select VIDEO_BTCX
select VIDEO_TUNER
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index b298b73..a3fe26c 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -24,10 +24,14 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <media/cx25840.h>
+#include <linux/firmware.h>
+#include <staging/altera.h>
#include "cx23885.h"
#include "tuner-xc2028.h"
#include "netup-init.h"
+#include "altera-ci.h"
+#include "xc5000.h"
#include "cx23888-ir.h"
static unsigned int enable_885_ir;
@@ -187,7 +191,7 @@ struct cx23885_board cx23885_boards[] = {
.portb = CX23885_MPEG_DVB,
},
[CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = {
- .cimax = 1,
+ .ci_type = 1,
.name = "NetUP Dual DVB-S2 CI",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
@@ -329,6 +333,19 @@ struct cx23885_board cx23885_boards[] = {
CX25840_SVIDEO_CHROMA4,
} },
},
+ [CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF] = {
+ .ci_type = 2,
+ .name = "NetUP Dual DVB-T/C-CI RF",
+ .porta = CX23885_ANALOG_VIDEO,
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x64,
+ .input = { {
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_COMPOSITE1,
+ } },
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -520,6 +537,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x5654,
.subdevice = 0x2390,
.card = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID,
+ }, {
+ .subvendor = 0x1b55,
+ .subdevice = 0xe2e4,
+ .card = CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -740,6 +761,9 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
/* Tuner Reset Command */
bitmask = 0x02;
break;
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+ altera_ci_tuner_reset(dev, port->nr);
+ break;
}
if (bitmask) {
@@ -998,6 +1022,33 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
break;
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+ /* GPIO-0 ~INT in
+ GPIO-1 TMS out
+ GPIO-2 ~reset chips out
+ GPIO-3 to GPIO-10 data/addr for CA in/out
+ GPIO-11 ~CS out
+ GPIO-12 ADDR out
+ GPIO-13 ~WR out
+ GPIO-14 ~RD out
+ GPIO-15 ~RDY in
+ GPIO-16 TCK out
+ GPIO-17 TDO in
+ GPIO-18 TDI out
+ */
+ cx_set(GP0_IO, 0x00060000); /* GPIO-1,2 as out */
+ /* GPIO-0 as INT, reset & TMS low */
+ cx_clear(GP0_IO, 0x00010006);
+ mdelay(100);/* reset delay */
+ cx_set(GP0_IO, 0x00000004); /* reset high */
+ cx_write(MC417_CTL, 0x00000037);/* enable GPIO-3..18 pins */
+ /* GPIO-17 is TDO in, GPIO-15 is ~RDY in, rest is out */
+ cx_write(MC417_OEN, 0x00005000);
+ /* ~RD, ~WR high; ADDR low; ~CS high */
+ cx_write(MC417_RWD, 0x00000d00);
+ /* enable irq */
+ cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
+ break;
}
}
@@ -1113,6 +1164,31 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
}
}
+int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
+{
+ int data;
+ int tdo = 0;
+ struct cx23885_dev *dev = (struct cx23885_dev *)device;
+ /*TMS*/
+ data = ((cx_read(GP0_IO)) & (~0x00000002));
+ data |= (tms ? 0x00020002 : 0x00020000);
+ cx_write(GP0_IO, data);
+
+ /*TDI*/
+ data = ((cx_read(MC417_RWD)) & (~0x0000a000));
+ data |= (tdi ? 0x00008000 : 0);
+ cx_write(MC417_RWD, data);
+ if (read_tdo)
+ tdo = (data & 0x00004000) ? 1 : 0; /*TDO*/
+
+ cx_write(MC417_RWD, data | 0x00002000);
+ udelay(1);
+ /*TCK*/
+ cx_write(MC417_RWD, data);
+
+ return tdo;
+}
+
void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
{
switch (dev->board) {
@@ -1212,6 +1288,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
@@ -1271,6 +1348,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_MYGICA_X8506:
@@ -1293,6 +1371,29 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
netup_initialize(dev);
break;
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
+ int ret;
+ const struct firmware *fw;
+ const char *filename = "dvb-netup-altera-01.fw";
+ char *action = "configure";
+ struct altera_config netup_config = {
+ .dev = dev,
+ .action = action,
+ .jtag_io = netup_jtag_io,
+ };
+
+ netup_initialize(dev);
+
+ ret = request_firmware(&fw, filename, &dev->pci->dev);
+ if (ret != 0)
+ printk(KERN_ERR "did not find the firmware file. (%s) "
+ "Please see linux/Documentation/dvb/ for more details "
+ "on firmware-problems.", filename);
+ else
+ altera_init(&netup_config, fw);
+
+ break;
+ }
}
}
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 3598824..9ad4c9c 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -29,9 +29,11 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <asm/div64.h>
+#include <linux/firmware.h>
#include "cx23885.h"
#include "cimax2.h"
+#include "altera-ci.h"
#include "cx23888-ir.h"
#include "cx23885-ir.h"
#include "cx23885-av.h"
@@ -902,8 +904,6 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
dev->pci_bus = dev->pci->bus->number;
dev->pci_slot = PCI_SLOT(dev->pci->devfn);
cx23885_irq_add(dev, 0x001f00);
- if (cx23885_boards[dev->board].cimax > 0)
- cx23885_irq_add(dev, 0x01800000); /* for CiMaxes */
/* External Master 1 Bus */
dev->i2c_bus[0].nr = 0;
@@ -1822,14 +1822,13 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
PCI_MSK_IR);
}
- if (cx23885_boards[dev->board].cimax > 0 &&
- ((pci_status & PCI_MSK_GPIO0) ||
- (pci_status & PCI_MSK_GPIO1))) {
+ if (cx23885_boards[dev->board].ci_type == 1 &&
+ (pci_status & (PCI_MSK_GPIO1 | PCI_MSK_GPIO0)))
+ handled += netup_ci_slot_status(dev, pci_status);
- if (cx23885_boards[dev->board].cimax > 0)
- handled += netup_ci_slot_status(dev, pci_status);
-
- }
+ if (cx23885_boards[dev->board].ci_type == 2 &&
+ (pci_status & PCI_MSK_GPIO0))
+ handled += altera_ci_irq(dev);
if (ts1_status) {
if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB)
@@ -2064,7 +2063,10 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev,
switch (dev->board) {
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
- cx23885_irq_add_enable(dev, 0x01800000); /* for NetUP */
+ cx23885_irq_add_enable(dev, PCI_MSK_GPIO1 | PCI_MSK_GPIO0);
+ break;
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+ cx23885_irq_add_enable(dev, PCI_MSK_GPIO0);
break;
}
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 5958cb8..cf36b9b 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -58,6 +58,8 @@
#include "atbm8830.h"
#include "ds3000.h"
#include "cx23885-f300.h"
+#include "altera-ci.h"
+#include "stv0367.h"
static unsigned int debug;
@@ -108,6 +110,22 @@ static void dvb_buf_release(struct videobuf_queue *q,
cx23885_free_buffer(q, (struct cx23885_buffer *)vb);
}
+static void cx23885_dvb_gate_ctrl(struct cx23885_tsport *port, int open)
+{
+ struct videobuf_dvb_frontends *f;
+ struct videobuf_dvb_frontend *fe;
+
+ f = &port->frontends;
+
+ if (f->gate <= 1) /* undefined or fe0 */
+ fe = videobuf_dvb_get_frontend(f, 1);
+ else
+ fe = videobuf_dvb_get_frontend(f, f->gate);
+
+ if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)
+ fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);
+}
+
static struct videobuf_queue_ops dvb_qops = {
.buf_setup = dvb_buf_setup,
.buf_prepare = dvb_buf_prepare,
@@ -570,12 +588,84 @@ static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
.i2c_address = 0x60,
.osc_clk = 20
};
+static struct stv0367_config netup_stv0367_config[] = {
+ {
+ .demod_address = 0x1c,
+ .xtal = 27000000,
+ .if_khz = 4500,
+ .if_iq_mode = 0,
+ .ts_mode = 1,
+ .clk_pol = 0,
+ }, {
+ .demod_address = 0x1d,
+ .xtal = 27000000,
+ .if_khz = 4500,
+ .if_iq_mode = 0,
+ .ts_mode = 1,
+ .clk_pol = 0,
+ },
+};
+
+static struct xc5000_config netup_xc5000_config[] = {
+ {
+ .i2c_address = 0x61,
+ .if_khz = 4500,
+ }, {
+ .i2c_address = 0x64,
+ .if_khz = 4500,
+ },
+};
+
+int netup_altera_fpga_rw(void *device, int flag, int data, int read)
+{
+ struct cx23885_dev *dev = (struct cx23885_dev *)device;
+ unsigned long timeout = jiffies + msecs_to_jiffies(1);
+ int mem = 0;
+
+ cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS);
+ if (read)
+ cx_set(MC417_OEN, ALT_DATA);
+ else {
+ cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */
+ mem = cx_read(MC417_RWD);
+ mem &= ~ALT_DATA;
+ mem |= (data & ALT_DATA);
+ cx_write(MC417_RWD, mem);
+ }
+
+ if (flag)
+ cx_set(MC417_RWD, ALT_AD_RG);/* ADDR */
+ else
+ cx_clear(MC417_RWD, ALT_AD_RG);/* VAL */
+
+ cx_clear(MC417_RWD, ALT_CS);/* ~CS */
+ if (read)
+ cx_clear(MC417_RWD, ALT_RD);
+ else
+ cx_clear(MC417_RWD, ALT_WR);
+
+ for (;;) {
+ mem = cx_read(MC417_RWD);
+ if ((mem & ALT_RDY) == 0)
+ break;
+ if (time_after(jiffies, timeout))
+ break;
+ udelay(1);
+ }
+
+ cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS);
+ if (read)
+ return mem & ALT_DATA;
+
+ return 0;
+};
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
- struct videobuf_dvb_frontend *fe0;
+ struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
+ int mfe_shared = 0; /* bus not shared by default */
int ret;
/* Get the first frontend */
@@ -586,6 +676,12 @@ static int dvb_register(struct cx23885_tsport *port)
/* init struct videobuf_dvb */
fe0->dvb.name = dev->name;
+ /* multi-frontend gate control is undefined or defaults to fe0 */
+ port->frontends.gate = 0;
+
+ /* Sets the gate control callback to be used by i2c command calls */
+ port->gate_ctrl = cx23885_dvb_gate_ctrl;
+
/* init frontend */
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
@@ -966,20 +1062,61 @@ static int dvb_register(struct cx23885_tsport *port)
break;
}
break;
-
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+ i2c_bus = &dev->i2c_bus[0];
+ mfe_shared = 1;/* MFE */
+ port->frontends.gate = 0;/* not clear for me yet */
+ /* ports B, C */
+ /* MFE frontend 1 DVB-T */
+ fe0->dvb.frontend = dvb_attach(stv0367ter_attach,
+ &netup_stv0367_config[port->nr - 1],
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL)
+ if (NULL == dvb_attach(xc5000_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &netup_xc5000_config[port->nr - 1]))
+ goto frontend_detach;
+ /* MFE frontend 2 */
+ fe1 = videobuf_dvb_get_frontend(&port->frontends, 2);
+ if (fe1 == NULL)
+ goto frontend_detach;
+ /* DVB-C init */
+ fe1->dvb.frontend = dvb_attach(stv0367cab_attach,
+ &netup_stv0367_config[port->nr - 1],
+ &i2c_bus->i2c_adap);
+ if (fe1->dvb.frontend != NULL) {
+ fe1->dvb.frontend->id = 1;
+ if (NULL == dvb_attach(xc5000_attach,
+ fe1->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &netup_xc5000_config[port->nr - 1]))
+ goto frontend_detach;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
dev->name);
break;
}
- if (NULL == fe0->dvb.frontend) {
+
+ if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) {
printk(KERN_ERR "%s: frontend initialization failed\n",
- dev->name);
- return -1;
+ dev->name);
+ goto frontend_detach;
}
+
/* define general-purpose callback pointer */
fe0->dvb.frontend->callback = cx23885_tuner_callback;
+ if (fe1)
+ fe1->dvb.frontend->callback = cx23885_tuner_callback;
+#if 0
+ /* Ensure all frontends negotiate bus access */
+ fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
+ if (fe1)
+ fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
+#endif
/* Put the analog decoder in standby to keep it quiet */
call_all(dev, core, s_power, 0);
@@ -989,10 +1126,10 @@ static int dvb_register(struct cx23885_tsport *port)
/* register everything */
ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
- &dev->pci->dev, adapter_nr, 0,
+ &dev->pci->dev, adapter_nr, mfe_shared,
cx23885_dvb_fe_ioctl_override);
if (ret)
- return ret;
+ goto frontend_detach;
/* init CI & MAC */
switch (dev->board) {
@@ -1008,6 +1145,17 @@ static int dvb_register(struct cx23885_tsport *port)
netup_ci_init(port);
break;
}
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
+ struct altera_ci_config netup_ci_cfg = {
+ .dev = dev,/* magic number to identify*/
+ .adapter = &port->frontends.adapter,/* for CI */
+ .demux = &fe0->dvb.demux,/* for hw pid filter */
+ .fpga_rw = netup_altera_fpga_rw,
+ };
+
+ altera_ci_init(&netup_ci_cfg, port->nr);
+ break;
+ }
case CX23885_BOARD_TEVII_S470: {
u8 eeprom[256]; /* 24C02 i2c eeprom */
@@ -1024,6 +1172,11 @@ static int dvb_register(struct cx23885_tsport *port)
}
return ret;
+
+frontend_detach:
+ port->gate_ctrl = NULL;
+ videobuf_dvb_dealloc_frontends(&port->frontends);
+ return -EINVAL;
}
int cx23885_dvb_register(struct cx23885_tsport *port)
@@ -1100,8 +1253,13 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port)
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
netup_ci_exit(port);
break;
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+ altera_ci_release(port->dev, port->nr);
+ break;
}
+ port->gate_ctrl = NULL;
+
return 0;
}
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 62e41ab..8b77fea 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -85,6 +85,7 @@
#define CX23885_BOARD_MYGICA_X8558PRO 27
#define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28
#define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID 29
+#define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
@@ -220,7 +221,7 @@ struct cx23885_board {
*/
u32 clk_freq;
struct cx23885_input input[MAX_CX23885_INPUT];
- int cimax; /* for NetUP */
+ int ci_type; /* for NetUP */
};
struct cx23885_subid {
@@ -303,6 +304,7 @@ struct cx23885_tsport {
/* Allow a single tsport to have multiple frontends */
u32 num_frontends;
+ void (*gate_ctrl)(struct cx23885_tsport *port, int open);
void *port_priv;
};
--
1.7.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2011-01-25 20:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-01-25 20:04 [PATCH 5/9 v3] Initial commit to support NetUP Dual DVB-T/C CI RF card Igor M. Liplianin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.