* [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.10
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these second round of Renesas ARM64 based SoC DT updates
for v4.10.
This pull request is based on a merge of:
* The previous round of such requests, tagged as renesas-arm64-dt-for-v4.10,
which I have already sent a pull-request for.
* The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
request for. This is included to provide dependencies for adding device
nodes for PRR.
The following changes since commit a59f630b3386cc30c28154f3d5707ee74d4bfe63:
Merge branch 'heads/drivers-for-v4.10' into HEAD (2016-11-15 14:13:37 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt2-for-v4.10
for you to fetch changes up to 1e7b5e4ee3f1b2c9cb607801a3f0adfa05a0818a:
arm64: dts: r8a7796: Add device node for PRR (2016-11-15 14:15:58 +0100)
----------------------------------------------------------------
Second Round of Renesas ARM64 Based SoC DT Updates for v4.10
Enhancements:
* Add device nodes for PRR
* Add m3ulcb board
* Enable I2C on r8a7796/salvator-x board
* Enable SDHI0 on h3ulcb board
Clean-up:
* Rename SDHI0 pins of h3ulcb board
----------------------------------------------------------------
Geert Uytterhoeven (2):
arm64: dts: r8a7795: Add device node for PRR
arm64: dts: r8a7796: Add device node for PRR
Ulrich Hecht (3):
arm64: dts: r8a7796: add I2C support
arm64: dts: r8a7796: Enable I2C DMA
arm64: dts: r8a7796: salvator-x: enable I2C
Vladimir Barinov (13):
arm64: dts: h3ulcb: update documentation with official board name
arm64: dts: h3ulcb: update header
arm64: dts: m3ulcb: add M3ULCB board DT bindings
arm64: dts: m3ulcb: initial device tree
arm64: dts: m3ulcb: enable SCIF clk and pins
arm64: dts: m3ulcb: enable GPIO leds
arm64: dts: m3ulcb: enable GPIO keys
arm64: dts: m3ulcb: enable EXTALR clk
arm64: dts: m3ulcb: enable WDT
arm64: dts: m3ulcb: enable SDHI0
arm64: dts: m3ulcb: enable SDHI2
arm64: dts: h3ulcb: enable SDHI2
arm64: dts: h3ulcb: rename SDHI0 pins
Documentation/devicetree/bindings/arm/shmobile.txt | 4 +-
arch/arm64/boot/dts/renesas/Makefile | 2 +-
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 53 +++++-
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 5 +
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 189 +++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 12 ++
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 116 +++++++++++++
7 files changed, 374 insertions(+), 7 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
^ permalink raw reply [flat|nested] 44+ messages in thread* [PATCH 01/18] arm64: dts: r8a7796: add I2C support
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Ulrich Hecht, Simon Horman
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 94 ++++++++++++++++++++++++++++++++
1 file changed, 94 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index f9cb7796ad49..2e940ff61378 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -17,6 +17,16 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -239,6 +249,90 @@
#power-domain-cells = <1>;
};
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a7796",
"renesas,rcar-gen3-scif", "renesas,scif";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 01/18] arm64: dts: r8a7796: add I2C support
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 94 ++++++++++++++++++++++++++++++++
1 file changed, 94 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index f9cb7796ad49..2e940ff61378 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -17,6 +17,16 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -239,6 +249,90 @@
#power-domain-cells = <1>;
};
+ i2c0: i2c at e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c at e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
scif2: serial at e6e88000 {
compatible = "renesas,scif-r8a7796",
"renesas,rcar-gen3-scif", "renesas,scif";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 02/18] arm64: dts: r8a7796: Enable I2C DMA
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Ulrich Hecht, Simon Horman
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 2e940ff61378..9599f5691099 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -257,6 +257,9 @@
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+ <&dmac2 0x91>, <&dmac2 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -269,6 +272,9 @@
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+ <&dmac2 0x93>, <&dmac2 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -281,6 +287,9 @@
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+ <&dmac2 0x95>, <&dmac2 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -293,6 +302,8 @@
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -305,6 +316,8 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -317,6 +330,8 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -329,6 +344,8 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 02/18] arm64: dts: r8a7796: Enable I2C DMA
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 2e940ff61378..9599f5691099 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -257,6 +257,9 @@
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+ <&dmac2 0x91>, <&dmac2 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -269,6 +272,9 @@
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+ <&dmac2 0x93>, <&dmac2 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -281,6 +287,9 @@
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+ <&dmac2 0x95>, <&dmac2 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -293,6 +302,8 @@
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -305,6 +316,8 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -317,6 +330,8 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -329,6 +344,8 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 03/18] arm64: dts: r8a7796: salvator-x: enable I2C
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Ulrich Hecht, Simon Horman
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index a9c296b1e1b7..f35e96ca7d60 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -111,6 +111,11 @@
function = "scif_clk";
};
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@@ -208,6 +213,13 @@
status = "okay";
};
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&wdt0 {
timeout-sec = <60>;
status = "okay";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 03/18] arm64: dts: r8a7796: salvator-x: enable I2C
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index a9c296b1e1b7..f35e96ca7d60 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -111,6 +111,11 @@
function = "scif_clk";
};
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@@ -208,6 +213,13 @@
status = "okay";
};
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&wdt0 {
timeout-sec = <60>;
status = "okay";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 04/18] arm64: dts: h3ulcb: update documentation with official board name
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This updates H3ULCB Device tree bindings Documentation with
official board name
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 23c77315fdac..968ae9a05440 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -49,7 +49,7 @@ Boards:
compatible = "renesas,genmai", "renesas,r7s72100"
- Gose
compatible = "renesas,gose", "renesas,r8a7793"
- - H3ULCB (RTP0RC7795SKB00010S)
+ - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S)
compatible = "renesas,h3ulcb", "renesas,r8a7795";
- Henninger
compatible = "renesas,henninger", "renesas,r8a7791"
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 04/18] arm64: dts: h3ulcb: update documentation with official board name
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This updates H3ULCB Device tree bindings Documentation with
official board name
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 23c77315fdac..968ae9a05440 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -49,7 +49,7 @@ Boards:
compatible = "renesas,genmai", "renesas,r7s72100"
- Gose
compatible = "renesas,gose", "renesas,r8a7793"
- - H3ULCB (RTP0RC7795SKB00010S)
+ - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S)
compatible = "renesas,h3ulcb", "renesas,r8a7795";
- Henninger
compatible = "renesas,henninger", "renesas,r8a7791"
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 05/18] arm64: dts: h3ulcb: update header
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This updates H3ULCB device tree header with official board name
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index bcb11a868343..f178fe1730de 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for the H3ULCB board
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2016 Cogent Embedded, Inc.
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 05/18] arm64: dts: h3ulcb: update header
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This updates H3ULCB device tree header with official board name
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index bcb11a868343..f178fe1730de 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for the H3ULCB board
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2016 Cogent Embedded, Inc.
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 06/18] arm64: dts: m3ulcb: add M3ULCB board DT bindings
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Add M3ULCB Device tree bindings Documentation, listing it as a supported
board.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 968ae9a05440..9a3c2631d0d4 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -61,6 +61,8 @@ Boards:
compatible = "renesas,kzm9g", "renesas,sh73a0"
- Lager (RTP0RC7790SEB00010S)
compatible = "renesas,lager", "renesas,r8a7790"
+ - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKB00010S)
+ compatible = "renesas,m3ulcb", "renesas,r8a7796";
- Marzen
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 06/18] arm64: dts: m3ulcb: add M3ULCB board DT bindings
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Add M3ULCB Device tree bindings Documentation, listing it as a supported
board.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 968ae9a05440..9a3c2631d0d4 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -61,6 +61,8 @@ Boards:
compatible = "renesas,kzm9g", "renesas,sh73a0"
- Lager (RTP0RC7790SEB00010S)
compatible = "renesas,lager", "renesas,r8a7790"
+ - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKB00010S)
+ compatible = "renesas,m3ulcb", "renesas,r8a7796";
- Marzen
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 07/18] arm64: dts: m3ulcb: initial device tree
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Add the initial device tree for the R8A7796 SoC based M3ULCB low cost
board (R-Car Starter Kit Pro)
This commit supports the following peripherals:
- SCIF (console)
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/Makefile | 2 +-
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 51 ++++++++++++++++++++++++++
2 files changed, 52 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index eb72830ec9eb..1618e0a3c81d 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
always := $(dtb-y)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
new file mode 100644
index 000000000000..1ae0708bb495
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -0,0 +1,51 @@
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7796.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Renesas M3ULCB board based on r8a7796";
+ compatible = "renesas,m3ulcb", "renesas,r8a7796";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&pfc {
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 07/18] arm64: dts: m3ulcb: initial device tree
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Add the initial device tree for the R8A7796 SoC based M3ULCB low cost
board (R-Car Starter Kit Pro)
This commit supports the following peripherals:
- SCIF (console)
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/Makefile | 2 +-
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 51 ++++++++++++++++++++++++++
2 files changed, 52 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index eb72830ec9eb..1618e0a3c81d 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
always := $(dtb-y)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
new file mode 100644
index 000000000000..1ae0708bb495
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -0,0 +1,51 @@
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7796.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Renesas M3ULCB board based on r8a7796";
+ compatible = "renesas,m3ulcb", "renesas,r8a7796";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&pfc {
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 08/18] arm64: dts: m3ulcb: enable SCIF clk and pins
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This enables the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 1ae0708bb495..96cda59c2698 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -37,10 +37,18 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
};
&scif2 {
@@ -49,3 +57,8 @@
status = "okay";
};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 08/18] arm64: dts: m3ulcb: enable SCIF clk and pins
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This enables the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 1ae0708bb495..96cda59c2698 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -37,10 +37,18 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
};
&scif2 {
@@ -49,3 +57,8 @@
status = "okay";
};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 09/18] arm64: dts: m3ulcb: enable GPIO leds
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports GPIO leds on M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 96cda59c2698..49162bd488f8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -30,6 +30,17 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led5 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+ led6 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&extal_clk {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 09/18] arm64: dts: m3ulcb: enable GPIO leds
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports GPIO leds on M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 96cda59c2698..49162bd488f8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -30,6 +30,17 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led5 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+ led6 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&extal_clk {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 10/18] arm64: dts: m3ulcb: enable GPIO keys
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports GPIO keys on M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 49162bd488f8..2f8f183ea0cd 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "r8a7796.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Renesas M3ULCB board based on r8a7796";
@@ -41,6 +42,18 @@
gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
};
};
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ key-1 {
+ linux,code = <KEY_1>;
+ label = "SW3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&extal_clk {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 10/18] arm64: dts: m3ulcb: enable GPIO keys
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports GPIO keys on M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 49162bd488f8..2f8f183ea0cd 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "r8a7796.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Renesas M3ULCB board based on r8a7796";
@@ -41,6 +42,18 @@
gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
};
};
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ key-1 {
+ linux,code = <KEY_1>;
+ label = "SW3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&extal_clk {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 11/18] arm64: dts: m3ulcb: enable EXTALR clk
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This enables EXTALR clock that can be used for the watchdog.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 2f8f183ea0cd..5567c46f3753 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -60,6 +60,10 @@
clock-frequency = <16666666>;
};
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 11/18] arm64: dts: m3ulcb: enable EXTALR clk
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This enables EXTALR clock that can be used for the watchdog.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 2f8f183ea0cd..5567c46f3753 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -60,6 +60,10 @@
clock-frequency = <16666666>;
};
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 12/18] arm64: dts: m3ulcb: enable WDT
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports watchdog timer for M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 5567c46f3753..593d0b4ab31a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -90,3 +90,8 @@
clock-frequency = <14745600>;
status = "okay";
};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 12/18] arm64: dts: m3ulcb: enable WDT
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports watchdog timer for M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 5567c46f3753..593d0b4ab31a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -90,3 +90,8 @@
clock-frequency = <14745600>;
status = "okay";
};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 13/18] arm64: dts: m3ulcb: enable SDHI0
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports SDHI0 on M3ULCB board SD card slot
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 49 ++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 593d0b4ab31a..d209e5480ff6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -54,6 +54,30 @@
gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
};
};
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&extal_clk {
@@ -77,6 +101,31 @@
groups = "scif_clk_a";
function = "scif_clk";
};
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
};
&scif2 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 13/18] arm64: dts: m3ulcb: enable SDHI0
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports SDHI0 on M3ULCB board SD card slot
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 49 ++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 593d0b4ab31a..d209e5480ff6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -54,6 +54,30 @@
gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
};
};
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&extal_clk {
@@ -77,6 +101,31 @@
groups = "scif_clk_a";
function = "scif_clk";
};
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
};
&scif2 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 14/18] arm64: dts: m3ulcb: enable SDHI2
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports SDHI2 for M3ULCB onboard eMMC
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 43 ++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index d209e5480ff6..c3f064ac2cb4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -55,6 +55,24 @@
};
};
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -113,6 +131,18 @@
function = "sdhi0";
power-source = <1800>;
};
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
};
&sdhi0 {
@@ -128,6 +158,19 @@
status = "okay";
};
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 14/18] arm64: dts: m3ulcb: enable SDHI2
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports SDHI2 for M3ULCB onboard eMMC
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 43 ++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index d209e5480ff6..c3f064ac2cb4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -55,6 +55,24 @@
};
};
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -113,6 +131,18 @@
function = "sdhi0";
power-source = <1800>;
};
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
};
&sdhi0 {
@@ -128,6 +158,19 @@
status = "okay";
};
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 15/18] arm64: dts: h3ulcb: enable SDHI2
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports SDHI2 for H3ULCB onboard eMMC
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 43 ++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index f178fe1730de..8d0ac076d8e2 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -62,6 +62,24 @@
clock-frequency = <24576000>;
};
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -157,6 +175,18 @@
power-source = <1800>;
};
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
sound_pins: sound {
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
function = "ssi";
@@ -273,6 +303,19 @@
status = "okay";
};
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&ssi1 {
shared-pin;
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 15/18] arm64: dts: h3ulcb: enable SDHI2
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports SDHI2 for H3ULCB onboard eMMC
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 43 ++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index f178fe1730de..8d0ac076d8e2 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -62,6 +62,24 @@
clock-frequency = <24576000>;
};
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -157,6 +175,18 @@
power-source = <1800>;
};
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data8", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
sound_pins: sound {
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
function = "ssi";
@@ -273,6 +303,19 @@
status = "okay";
};
+&sdhi2 {
+ /* used for on-board 8bit eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&ssi1 {
shared-pin;
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 16/18] arm64: dts: h3ulcb: rename SDHI0 pins
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Vladimir Barinov, Simon Horman
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This changes SDHI0 pin names for H3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 8d0ac076d8e2..6ffb0517421a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -163,13 +163,13 @@
function = "avb";
};
- sdhi0_pins_3v3: sd0_3v3 {
+ sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <3300>;
};
- sdhi0_pins_1v8: sd0_1v8 {
+ sdhi0_pins_uhs: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
@@ -291,8 +291,8 @@
};
&sdhi0 {
- pinctrl-0 = <&sdhi0_pins_3v3>;
- pinctrl-1 = <&sdhi0_pins_1v8>;
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi0>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 16/18] arm64: dts: h3ulcb: rename SDHI0 pins
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This changes SDHI0 pin names for H3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 8d0ac076d8e2..6ffb0517421a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -163,13 +163,13 @@
function = "avb";
};
- sdhi0_pins_3v3: sd0_3v3 {
+ sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <3300>;
};
- sdhi0_pins_1v8: sd0_1v8 {
+ sdhi0_pins_uhs: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
@@ -291,8 +291,8 @@
};
&sdhi0 {
- pinctrl-0 = <&sdhi0_pins_3v3>;
- pinctrl-1 = <&sdhi0_pins_1v8>;
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi0>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 17/18] arm64: dts: r8a7795: Add device node for PRR
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 681f54422375..a39a702b904d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -321,6 +321,11 @@
#power-domain-cells = <0>;
};
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7795-sysc";
reg = <0 0xe6180000 0 0x0400>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 17/18] arm64: dts: r8a7795: Add device node for PRR
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 681f54422375..a39a702b904d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -321,6 +321,11 @@
#power-domain-cells = <0>;
};
+ prr: chipid at fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+
sysc: system-controller at e6180000 {
compatible = "renesas,r8a7795-sysc";
reg = <0 0xe6180000 0 0x0400>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH 18/18] arm64: dts: r8a7796: Add device node for PRR
2016-11-17 14:04 ` Simon Horman
@ 2016-11-17 14:04 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 9599f5691099..41a050d2f192 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -243,6 +243,11 @@
#power-domain-cells = <0>;
};
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7796-sysc";
reg = <0 0xe6180000 0 0x0400>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread* [PATCH 18/18] arm64: dts: r8a7796: Add device node for PRR
@ 2016-11-17 14:04 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 9599f5691099..41a050d2f192 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -243,6 +243,11 @@
#power-domain-cells = <0>;
};
+ prr: chipid at fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+
sysc: system-controller at e6180000 {
compatible = "renesas,r8a7796-sysc";
reg = <0 0xe6180000 0 0x0400>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.10
2016-11-17 14:04 ` Simon Horman
@ 2016-11-19 1:41 ` Olof Johansson
-1 siblings, 0 replies; 44+ messages in thread
From: Olof Johansson @ 2016-11-19 1:41 UTC (permalink / raw)
To: Simon Horman
Cc: arm, linux-renesas-soc, Kevin Hilman, Arnd Bergmann,
linux-arm-kernel, Magnus Damm
On Thu, Nov 17, 2016 at 03:04:55PM +0100, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these second round of Renesas ARM64 based SoC DT updates
> for v4.10.
>
> This pull request is based on a merge of:
>
> * The previous round of such requests, tagged as renesas-arm64-dt-for-v4.10,
> which I have already sent a pull-request for.
> * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> request for. This is included to provide dependencies for adding device
> nodes for PRR.
Please avoid entangling these pull requests, since now I can't merge DT since
I'm rejecting your drivers pull request.
I also don't understand why you need a driver branch as base. The PRR
nodes are literally just a compatible field and a reg entry. It should
depend on nothing.
So, I'm a little confused here. Please disentangle this and send a separate
pull request, I'll be happy to merge that.
-Olof
^ permalink raw reply [flat|nested] 44+ messages in thread
* [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.10
@ 2016-11-19 1:41 ` Olof Johansson
0 siblings, 0 replies; 44+ messages in thread
From: Olof Johansson @ 2016-11-19 1:41 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 17, 2016 at 03:04:55PM +0100, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these second round of Renesas ARM64 based SoC DT updates
> for v4.10.
>
> This pull request is based on a merge of:
>
> * The previous round of such requests, tagged as renesas-arm64-dt-for-v4.10,
> which I have already sent a pull-request for.
> * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> request for. This is included to provide dependencies for adding device
> nodes for PRR.
Please avoid entangling these pull requests, since now I can't merge DT since
I'm rejecting your drivers pull request.
I also don't understand why you need a driver branch as base. The PRR
nodes are literally just a compatible field and a reg entry. It should
depend on nothing.
So, I'm a little confused here. Please disentangle this and send a separate
pull request, I'll be happy to merge that.
-Olof
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.10
2016-11-19 1:41 ` Olof Johansson
@ 2016-11-21 10:55 ` Simon Horman
-1 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-21 10:55 UTC (permalink / raw)
To: Olof Johansson
Cc: arm, linux-renesas-soc, Kevin Hilman, Arnd Bergmann,
linux-arm-kernel, Magnus Damm
On Fri, Nov 18, 2016 at 05:41:50PM -0800, Olof Johansson wrote:
> On Thu, Nov 17, 2016 at 03:04:55PM +0100, Simon Horman wrote:
> > Hi Olof, Hi Kevin, Hi Arnd,
> >
> > Please consider these second round of Renesas ARM64 based SoC DT updates
> > for v4.10.
> >
> > This pull request is based on a merge of:
> >
> > * The previous round of such requests, tagged as renesas-arm64-dt-for-v4.10,
> > which I have already sent a pull-request for.
> > * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> > tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> > request for. This is included to provide dependencies for adding device
> > nodes for PRR.
>
> Please avoid entangling these pull requests, since now I can't merge DT since
> I'm rejecting your drivers pull request.
>
> I also don't understand why you need a driver branch as base. The PRR
> nodes are literally just a compatible field and a reg entry. It should
> depend on nothing.
>
> So, I'm a little confused here. Please disentangle this and send a separate
> pull request, I'll be happy to merge that.
Sorry about this.
As you correctly point out the PRR patches do not depend on anything and
the merge described above is unnecessary.
I will prepare a fresh pull request based (only) on
renesas-arm64-dt-for-v4.10.
^ permalink raw reply [flat|nested] 44+ messages in thread
* [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.10
@ 2016-11-21 10:55 ` Simon Horman
0 siblings, 0 replies; 44+ messages in thread
From: Simon Horman @ 2016-11-21 10:55 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Nov 18, 2016 at 05:41:50PM -0800, Olof Johansson wrote:
> On Thu, Nov 17, 2016 at 03:04:55PM +0100, Simon Horman wrote:
> > Hi Olof, Hi Kevin, Hi Arnd,
> >
> > Please consider these second round of Renesas ARM64 based SoC DT updates
> > for v4.10.
> >
> > This pull request is based on a merge of:
> >
> > * The previous round of such requests, tagged as renesas-arm64-dt-for-v4.10,
> > which I have already sent a pull-request for.
> > * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> > tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> > request for. This is included to provide dependencies for adding device
> > nodes for PRR.
>
> Please avoid entangling these pull requests, since now I can't merge DT since
> I'm rejecting your drivers pull request.
>
> I also don't understand why you need a driver branch as base. The PRR
> nodes are literally just a compatible field and a reg entry. It should
> depend on nothing.
>
> So, I'm a little confused here. Please disentangle this and send a separate
> pull request, I'll be happy to merge that.
Sorry about this.
As you correctly point out the PRR patches do not depend on anything and
the merge described above is unnecessary.
I will prepare a fresh pull request based (only) on
renesas-arm64-dt-for-v4.10.
^ permalink raw reply [flat|nested] 44+ messages in thread