* OMAP4 support @ 2012-07-10 13:41 Gary Thomas 2012-07-10 17:05 ` Chris Lalancette 0 siblings, 1 reply; 9+ messages in thread From: Gary Thomas @ 2012-07-10 13:41 UTC (permalink / raw) To: Laurent Pinchart; +Cc: Linux Media Discussion I'm looking for video support on OMAP4 platforms. I've found the PandaBoard camera project (http://www.omappedia.org/wiki/PandaBoard_Camera_Support) and this is starting to work. That said, I'm having some issues with setting up the pipeline, etc. Can this list help out? Also, does anyone know of any support for the CPI input interface which is available on the OMAP4460? Thanks -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: OMAP4 support 2012-07-10 13:41 OMAP4 support Gary Thomas @ 2012-07-10 17:05 ` Chris Lalancette 2012-07-10 19:31 ` Gary Thomas 0 siblings, 1 reply; 9+ messages in thread From: Chris Lalancette @ 2012-07-10 17:05 UTC (permalink / raw) To: Gary Thomas; +Cc: Laurent Pinchart, Linux Media Discussion, sergio.a.aguirre On Tue, Jul 10, 2012 at 9:41 AM, Gary Thomas <gary@mlbassoc.com> wrote: > I'm looking for video support on OMAP4 platforms. I've found the > PandaBoard camera project > (http://www.omappedia.org/wiki/PandaBoard_Camera_Support) > and this is starting to work. That said, I'm having some > issues with setting up the pipeline, etc. > > Can this list help out? I'm not sure exactly what kind of cameras you want to get working, but if you are looking to get CSI2 cameras going through the ISS, Sergio Aguirre has been working on support. He also works on the media-ctl tool, which is used for configuring the media framework pipeline. The latest versions that I am aware of are here: git://gitorious.org/omap4-v4l2-camera/omap4-v4l2-camera.git I've also added Sergio on the CC list. Hope that helps, Chris ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: OMAP4 support 2012-07-10 17:05 ` Chris Lalancette @ 2012-07-10 19:31 ` Gary Thomas 2012-07-13 2:30 ` Sergio Aguirre 0 siblings, 1 reply; 9+ messages in thread From: Gary Thomas @ 2012-07-10 19:31 UTC (permalink / raw) To: Chris Lalancette Cc: Laurent Pinchart, Linux Media Discussion, sergio.a.aguirre On 2012-07-10 11:05, Chris Lalancette wrote: > On Tue, Jul 10, 2012 at 9:41 AM, Gary Thomas <gary@mlbassoc.com> wrote: >> I'm looking for video support on OMAP4 platforms. I've found the >> PandaBoard camera project >> (http://www.omappedia.org/wiki/PandaBoard_Camera_Support) >> and this is starting to work. That said, I'm having some >> issues with setting up the pipeline, etc. >> >> Can this list help out? > > I'm not sure exactly what kind of cameras you want to get working, but > if you are looking to get CSI2 cameras going through the ISS, Sergio > Aguirre has been working on support. He also works on the media-ctl > tool, which is used for configuring the media framework pipeline. The > latest versions that I am aware of are here: > > git://gitorious.org/omap4-v4l2-camera/omap4-v4l2-camera.git Yes, this is the tree I've been working with (pointed to by the page I mentioned). My kernel can see the camera OV5650 and set up the pipeline. I am able to grab the raw SGRBG10 data but I'd like to get the ISS to convert this to a more usable UYVY format. Here's what I tried: media-ctl -r media-ctl -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 [1]' media-ctl -l '"OMAP4 ISS ISP IPIPEIF":1 -> "OMAP4 ISS ISP IPIPEIF output":0 [1]' media-ctl -f '"ov5650 3-0036":0 [SGRBG10 2592x1944]' media-ctl -f '"OMAP4 ISS CSI2a":0 [SGRBG10 2592x1944]' media-ctl -f '"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 2592x1944]','"OMAP4 ISS ISP IPIPEIF":1 [UYVY 2592x1944]' Sadly, I can't get the IPIPEIF element to take SGRGB10 in and put UYVY out (my reading of the manual implies that this _should_ be possible). I always see this pipeline setup: - entity 5: OMAP4 ISS ISP IPIPEIF (3 pads, 4 links) type V4L2 subdev subtype Unknown device node name /dev/v4l-subdev2 pad0: Input [SGRBG10 2592x1944] <- 'OMAP4 ISS CSI2a':pad1 [ACTIVE] <- 'OMAP4 ISS CSI2b':pad1 [] pad1: Output [SGRBG10 2592x1944] -> 'OMAP4 ISS ISP IPIPEIF output':pad0 [ACTIVE] pad2: Output [SGRBG10 2592x1944] -> 'OMAP4 ISS ISP resizer':pad0 [] Am I missing something? How can I make this conversion in the ISS? Note: if this is not the appropriate place to ask these questions, please redirect me (hopefully to a useful list :-) Thanks -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: OMAP4 support 2012-07-10 19:31 ` Gary Thomas @ 2012-07-13 2:30 ` Sergio Aguirre 2012-07-13 10:24 ` Gary Thomas 0 siblings, 1 reply; 9+ messages in thread From: Sergio Aguirre @ 2012-07-13 2:30 UTC (permalink / raw) To: Gary Thomas; +Cc: Chris Lalancette, Laurent Pinchart, Linux Media Discussion Hi Gary, On Tue, Jul 10, 2012 at 2:31 PM, Gary Thomas <gary@mlbassoc.com> wrote: > On 2012-07-10 11:05, Chris Lalancette wrote: >> >> On Tue, Jul 10, 2012 at 9:41 AM, Gary Thomas <gary@mlbassoc.com> wrote: >>> >>> I'm looking for video support on OMAP4 platforms. I've found the >>> PandaBoard camera project >>> (http://www.omappedia.org/wiki/PandaBoard_Camera_Support) >>> and this is starting to work. That said, I'm having some >>> issues with setting up the pipeline, etc. >>> >>> Can this list help out? >> >> >> I'm not sure exactly what kind of cameras you want to get working, but >> if you are looking to get CSI2 cameras going through the ISS, Sergio >> Aguirre has been working on support. He also works on the media-ctl >> tool, which is used for configuring the media framework pipeline. The >> latest versions that I am aware of are here: >> >> git://gitorious.org/omap4-v4l2-camera/omap4-v4l2-camera.git > > > Yes, this is the tree I've been working with (pointed to by the page I > mentioned). > > My kernel can see the camera OV5650 and set up the pipeline. I am able to > grab > the raw SGRBG10 data but I'd like to get the ISS to convert this to a more > usable > UYVY format. Here's what I tried: > media-ctl -r > media-ctl -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 [1]' > media-ctl -l '"OMAP4 ISS ISP IPIPEIF":1 -> "OMAP4 ISS ISP IPIPEIF > output":0 [1]' > media-ctl -f '"ov5650 3-0036":0 [SGRBG10 2592x1944]' > media-ctl -f '"OMAP4 ISS CSI2a":0 [SGRBG10 2592x1944]' > media-ctl -f '"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 2592x1944]','"OMAP4 ISS > ISP IPIPEIF":1 [UYVY 2592x1944]' > > Sadly, I can't get the IPIPEIF element to take SGRGB10 in and put UYVY out > (my reading > of the manual implies that this _should_ be possible). I always see this > pipeline setup: > - entity 5: OMAP4 ISS ISP IPIPEIF (3 pads, 4 links) > type V4L2 subdev subtype Unknown > device node name /dev/v4l-subdev2 > pad0: Input [SGRBG10 2592x1944] > <- 'OMAP4 ISS CSI2a':pad1 [ACTIVE] > <- 'OMAP4 ISS CSI2b':pad1 [] > pad1: Output [SGRBG10 2592x1944] > -> 'OMAP4 ISS ISP IPIPEIF output':pad0 [ACTIVE] > pad2: Output [SGRBG10 2592x1944] > -> 'OMAP4 ISS ISP resizer':pad0 [] > > Am I missing something? How can I make this conversion in the ISS? The core problem is that, i haven't published any support for RAW10->YUV conversion, which is part of the IPIPE module (not the IPIPEIF, like you mention). I had some patches, but sadly it is unfinished work. :/ Now, there's a main non-technical problem... I no longer work at TI since end of June this year, and I don't have the right HW setup available anymore. Those sensors were company's asset, and I couldn't keep any. Now, we can make this work with cooperation of someone who has the right setup, and me sharing my patches and some advice on my experience. What do you think? > > Note: if this is not the appropriate place to ask these questions, please > redirect me (hopefully to a useful list :-) As I'm the main person who has been actively developing this, I'm your guy to ask questions :). By the way, this development has been my initiative the whole time, and not an official TI objective, so, to be honest, asking TI for official support won't help much right now. Regards, Sergio > > > Thanks > > -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: OMAP4 support 2012-07-13 2:30 ` Sergio Aguirre @ 2012-07-13 10:24 ` Gary Thomas 2012-07-13 11:30 ` Gary Thomas 2012-07-15 14:31 ` Sergio Aguirre 0 siblings, 2 replies; 9+ messages in thread From: Gary Thomas @ 2012-07-13 10:24 UTC (permalink / raw) To: Sergio Aguirre; +Cc: Chris Lalancette, Laurent Pinchart, Linux Media Discussion On 2012-07-12 20:30, Sergio Aguirre wrote: > Hi Gary, > > On Tue, Jul 10, 2012 at 2:31 PM, Gary Thomas <gary@mlbassoc.com> wrote: >> On 2012-07-10 11:05, Chris Lalancette wrote: >>> >>> On Tue, Jul 10, 2012 at 9:41 AM, Gary Thomas <gary@mlbassoc.com> wrote: >>>> >>>> I'm looking for video support on OMAP4 platforms. I've found the >>>> PandaBoard camera project >>>> (http://www.omappedia.org/wiki/PandaBoard_Camera_Support) >>>> and this is starting to work. That said, I'm having some >>>> issues with setting up the pipeline, etc. >>>> >>>> Can this list help out? >>> >>> >>> I'm not sure exactly what kind of cameras you want to get working, but >>> if you are looking to get CSI2 cameras going through the ISS, Sergio >>> Aguirre has been working on support. He also works on the media-ctl >>> tool, which is used for configuring the media framework pipeline. The >>> latest versions that I am aware of are here: >>> >>> git://gitorious.org/omap4-v4l2-camera/omap4-v4l2-camera.git >> >> >> Yes, this is the tree I've been working with (pointed to by the page I >> mentioned). >> >> My kernel can see the camera OV5650 and set up the pipeline. I am able to >> grab >> the raw SGRBG10 data but I'd like to get the ISS to convert this to a more >> usable >> UYVY format. Here's what I tried: >> media-ctl -r >> media-ctl -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 [1]' >> media-ctl -l '"OMAP4 ISS ISP IPIPEIF":1 -> "OMAP4 ISS ISP IPIPEIF >> output":0 [1]' >> media-ctl -f '"ov5650 3-0036":0 [SGRBG10 2592x1944]' >> media-ctl -f '"OMAP4 ISS CSI2a":0 [SGRBG10 2592x1944]' >> media-ctl -f '"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 2592x1944]','"OMAP4 ISS >> ISP IPIPEIF":1 [UYVY 2592x1944]' >> >> Sadly, I can't get the IPIPEIF element to take SGRGB10 in and put UYVY out >> (my reading >> of the manual implies that this _should_ be possible). I always see this >> pipeline setup: >> - entity 5: OMAP4 ISS ISP IPIPEIF (3 pads, 4 links) >> type V4L2 subdev subtype Unknown >> device node name /dev/v4l-subdev2 >> pad0: Input [SGRBG10 2592x1944] >> <- 'OMAP4 ISS CSI2a':pad1 [ACTIVE] >> <- 'OMAP4 ISS CSI2b':pad1 [] >> pad1: Output [SGRBG10 2592x1944] >> -> 'OMAP4 ISS ISP IPIPEIF output':pad0 [ACTIVE] >> pad2: Output [SGRBG10 2592x1944] >> -> 'OMAP4 ISS ISP resizer':pad0 [] >> >> Am I missing something? How can I make this conversion in the ISS? > > The core problem is that, i haven't published any support for > RAW10->YUV conversion, > which is part of the IPIPE module (not the IPIPEIF, like you mention). I had > some patches, but sadly it is unfinished work. :/ > > Now, there's a main non-technical problem... I no longer work at TI > since end of June > this year, and I don't have the right HW setup available anymore. > Those sensors were > company's asset, and I couldn't keep any. > > Now, we can make this work with cooperation of someone who has the right setup, > and me sharing my patches and some advice on my experience. > > What do you think? > >> >> Note: if this is not the appropriate place to ask these questions, please >> redirect me (hopefully to a useful list :-) > > As I'm the main person who has been actively developing this, I'm your > guy to ask questions :). > > By the way, this development has been my initiative the whole time, > and not an official > TI objective, so, to be honest, asking TI for official support won't > help much right now. Tell me how I can help make this happen. I'll be glad to apply patches, figure out bugs, etc, I just need a little help with getting started. I have access to the hardware and it's really important that I make some progress on this soon. Can you share your RAW10->YUV patches and some guidance on how to proceed? I have been able to capture RAW10 data, but often the whole thing just sits there (hangs). Restarting the process sometimes works, sometimes not. Looking at the registers and the actual signals on a scope do not show any difference that we can find. Any ideas what might cause this? Have you seen it as well? Thanks for the help - Please let me know how I can get this working... -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: OMAP4 support 2012-07-13 10:24 ` Gary Thomas @ 2012-07-13 11:30 ` Gary Thomas 2012-07-15 14:31 ` Sergio Aguirre 1 sibling, 0 replies; 9+ messages in thread From: Gary Thomas @ 2012-07-13 11:30 UTC (permalink / raw) To: Sergio Aguirre; +Cc: Chris Lalancette, Laurent Pinchart, Linux Media Discussion On 2012-07-13 04:24, Gary Thomas wrote: > On 2012-07-12 20:30, Sergio Aguirre wrote: >> Hi Gary, >> >> On Tue, Jul 10, 2012 at 2:31 PM, Gary Thomas <gary@mlbassoc.com> wrote: >>> On 2012-07-10 11:05, Chris Lalancette wrote: >>>> >>>> On Tue, Jul 10, 2012 at 9:41 AM, Gary Thomas <gary@mlbassoc.com> wrote: >>>>> >>>>> I'm looking for video support on OMAP4 platforms. I've found the >>>>> PandaBoard camera project >>>>> (http://www.omappedia.org/wiki/PandaBoard_Camera_Support) >>>>> and this is starting to work. That said, I'm having some >>>>> issues with setting up the pipeline, etc. >>>>> >>>>> Can this list help out? >>>> >>>> >>>> I'm not sure exactly what kind of cameras you want to get working, but >>>> if you are looking to get CSI2 cameras going through the ISS, Sergio >>>> Aguirre has been working on support. He also works on the media-ctl >>>> tool, which is used for configuring the media framework pipeline. The >>>> latest versions that I am aware of are here: >>>> >>>> git://gitorious.org/omap4-v4l2-camera/omap4-v4l2-camera.git >>> >>> >>> Yes, this is the tree I've been working with (pointed to by the page I >>> mentioned). >>> >>> My kernel can see the camera OV5650 and set up the pipeline. I am able to >>> grab >>> the raw SGRBG10 data but I'd like to get the ISS to convert this to a more >>> usable >>> UYVY format. Here's what I tried: >>> media-ctl -r >>> media-ctl -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 [1]' >>> media-ctl -l '"OMAP4 ISS ISP IPIPEIF":1 -> "OMAP4 ISS ISP IPIPEIF >>> output":0 [1]' >>> media-ctl -f '"ov5650 3-0036":0 [SGRBG10 2592x1944]' >>> media-ctl -f '"OMAP4 ISS CSI2a":0 [SGRBG10 2592x1944]' >>> media-ctl -f '"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 2592x1944]','"OMAP4 ISS >>> ISP IPIPEIF":1 [UYVY 2592x1944]' >>> >>> Sadly, I can't get the IPIPEIF element to take SGRGB10 in and put UYVY out >>> (my reading >>> of the manual implies that this _should_ be possible). I always see this >>> pipeline setup: >>> - entity 5: OMAP4 ISS ISP IPIPEIF (3 pads, 4 links) >>> type V4L2 subdev subtype Unknown >>> device node name /dev/v4l-subdev2 >>> pad0: Input [SGRBG10 2592x1944] >>> <- 'OMAP4 ISS CSI2a':pad1 [ACTIVE] >>> <- 'OMAP4 ISS CSI2b':pad1 [] >>> pad1: Output [SGRBG10 2592x1944] >>> -> 'OMAP4 ISS ISP IPIPEIF output':pad0 [ACTIVE] >>> pad2: Output [SGRBG10 2592x1944] >>> -> 'OMAP4 ISS ISP resizer':pad0 [] >>> >>> Am I missing something? How can I make this conversion in the ISS? >> >> The core problem is that, i haven't published any support for >> RAW10->YUV conversion, >> which is part of the IPIPE module (not the IPIPEIF, like you mention). I had >> some patches, but sadly it is unfinished work. :/ >> >> Now, there's a main non-technical problem... I no longer work at TI >> since end of June >> this year, and I don't have the right HW setup available anymore. >> Those sensors were >> company's asset, and I couldn't keep any. >> >> Now, we can make this work with cooperation of someone who has the right setup, >> and me sharing my patches and some advice on my experience. >> >> What do you think? >> >>> >>> Note: if this is not the appropriate place to ask these questions, please >>> redirect me (hopefully to a useful list :-) >> >> As I'm the main person who has been actively developing this, I'm your >> guy to ask questions :). >> >> By the way, this development has been my initiative the whole time, >> and not an official >> TI objective, so, to be honest, asking TI for official support won't >> help much right now. > > Tell me how I can help make this happen. I'll be glad to apply patches, > figure out bugs, etc, I just need a little help with getting started. > I have access to the hardware and it's really important that I make some > progress on this soon. > > Can you share your RAW10->YUV patches and some guidance on how to proceed? > > I have been able to capture RAW10 data, but often the whole thing just sits > there (hangs). Restarting the process sometimes works, sometimes not. Looking > at the registers and the actual signals on a scope do not show any difference > that we can find. Any ideas what might cause this? Have you seen it as well? > > Thanks for the help - Please let me know how I can get this working... > One more question - what's the best branch to work from in your tree? I'm currently using devel-ISPSUPPORT -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: OMAP4 support 2012-07-13 10:24 ` Gary Thomas 2012-07-13 11:30 ` Gary Thomas @ 2012-07-15 14:31 ` Sergio Aguirre 2012-07-15 20:24 ` Gary Thomas 1 sibling, 1 reply; 9+ messages in thread From: Sergio Aguirre @ 2012-07-15 14:31 UTC (permalink / raw) To: Gary Thomas; +Cc: Chris Lalancette, Laurent Pinchart, Linux Media Discussion Hi Gary, On Fri, Jul 13, 2012 at 5:24 AM, Gary Thomas <gary@mlbassoc.com> wrote: > On 2012-07-12 20:30, Sergio Aguirre wrote: >> >> Hi Gary, >> >> On Tue, Jul 10, 2012 at 2:31 PM, Gary Thomas <gary@mlbassoc.com> wrote: >>> >>> On 2012-07-10 11:05, Chris Lalancette wrote: >>>> >>>> >>>> On Tue, Jul 10, 2012 at 9:41 AM, Gary Thomas <gary@mlbassoc.com> wrote: >>>>> >>>>> >>>>> I'm looking for video support on OMAP4 platforms. I've found the >>>>> PandaBoard camera project >>>>> (http://www.omappedia.org/wiki/PandaBoard_Camera_Support) >>>>> and this is starting to work. That said, I'm having some >>>>> issues with setting up the pipeline, etc. >>>>> >>>>> Can this list help out? >>>> >>>> >>>> >>>> I'm not sure exactly what kind of cameras you want to get working, but >>>> if you are looking to get CSI2 cameras going through the ISS, Sergio >>>> Aguirre has been working on support. He also works on the media-ctl >>>> tool, which is used for configuring the media framework pipeline. The >>>> latest versions that I am aware of are here: >>>> >>>> git://gitorious.org/omap4-v4l2-camera/omap4-v4l2-camera.git >>> >>> >>> >>> Yes, this is the tree I've been working with (pointed to by the page I >>> mentioned). >>> >>> My kernel can see the camera OV5650 and set up the pipeline. I am able >>> to >>> grab >>> the raw SGRBG10 data but I'd like to get the ISS to convert this to a >>> more >>> usable >>> UYVY format. Here's what I tried: >>> media-ctl -r >>> media-ctl -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 [1]' >>> media-ctl -l '"OMAP4 ISS ISP IPIPEIF":1 -> "OMAP4 ISS ISP IPIPEIF >>> output":0 [1]' >>> media-ctl -f '"ov5650 3-0036":0 [SGRBG10 2592x1944]' >>> media-ctl -f '"OMAP4 ISS CSI2a":0 [SGRBG10 2592x1944]' >>> media-ctl -f '"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 2592x1944]','"OMAP4 >>> ISS >>> ISP IPIPEIF":1 [UYVY 2592x1944]' >>> >>> Sadly, I can't get the IPIPEIF element to take SGRGB10 in and put UYVY >>> out >>> (my reading >>> of the manual implies that this _should_ be possible). I always see this >>> pipeline setup: >>> - entity 5: OMAP4 ISS ISP IPIPEIF (3 pads, 4 links) >>> type V4L2 subdev subtype Unknown >>> device node name /dev/v4l-subdev2 >>> pad0: Input [SGRBG10 2592x1944] >>> <- 'OMAP4 ISS CSI2a':pad1 [ACTIVE] >>> <- 'OMAP4 ISS CSI2b':pad1 [] >>> pad1: Output [SGRBG10 2592x1944] >>> -> 'OMAP4 ISS ISP IPIPEIF output':pad0 [ACTIVE] >>> pad2: Output [SGRBG10 2592x1944] >>> -> 'OMAP4 ISS ISP resizer':pad0 [] >>> >>> Am I missing something? How can I make this conversion in the ISS? >> >> >> The core problem is that, i haven't published any support for >> RAW10->YUV conversion, >> which is part of the IPIPE module (not the IPIPEIF, like you mention). I >> had >> some patches, but sadly it is unfinished work. :/ >> >> Now, there's a main non-technical problem... I no longer work at TI >> since end of June >> this year, and I don't have the right HW setup available anymore. >> Those sensors were >> company's asset, and I couldn't keep any. >> >> Now, we can make this work with cooperation of someone who has the right >> setup, >> and me sharing my patches and some advice on my experience. >> >> What do you think? >> >>> >>> Note: if this is not the appropriate place to ask these questions, please >>> redirect me (hopefully to a useful list :-) >> >> >> As I'm the main person who has been actively developing this, I'm your >> guy to ask questions :). >> >> By the way, this development has been my initiative the whole time, >> and not an official >> TI objective, so, to be honest, asking TI for official support won't >> help much right now. > > > Tell me how I can help make this happen. I'll be glad to apply patches, > figure out bugs, etc, I just need a little help with getting started. > I have access to the hardware and it's really important that I make some > progress on this soon. > > Can you share your RAW10->YUV patches and some guidance on how to proceed? Sure. I just pushed an internal branch I had, named: "devel-ISPSUPPORT-IPIPE", please take that as a base. And please try these commands: media-ctl -r -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 [1]','"OMAP4 ISS ISP IPIPEIF":2 -> "OMAP4 ISS ISP IPIPE":0 [1]','"OMAP4 ISS ISP IPIPE":1 -> "OMAP4 ISS ISP resizer":0 [1]','"OMAP4 ISS ISP resizer":1 -> "OMAP4 ISS ISP resizer a output":0 [1]' media-ctl -f '"ov5650 3-0036":0 [SGRBG10 2592x1944]','"OMAP4 ISS CSI2a":0 [SGRBG10 2592x1944]','"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 2592x1944]','"OMAP4 ISS ISP IPIPE":0 [SGRBG10 2592x1944]','"OMAP4 ISS ISP resizer":0 [UYVY 2592x1944]' yavta /dev/video3 -c4 -n1 -s2592x1944 -fUYVY -Fov5650_2592x1944_UYVY_8bpp.yuv > > I have been able to capture RAW10 data, but often the whole thing just sits > there (hangs). Restarting the process sometimes works, sometimes not. > Looking > at the registers and the actual signals on a scope do not show any > difference > that we can find. Any ideas what might cause this? Have you seen it as > well? Can you please try again with the before mentioned branch? The branch you were using didn't have some changes, so maybe this new one would take care of that. > > Thanks for the help - Please let me know how I can get this working... Well, thanks for the patience! Regards, Sergio > > > -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: OMAP4 support 2012-07-15 14:31 ` Sergio Aguirre @ 2012-07-15 20:24 ` Gary Thomas 2012-07-25 14:10 ` Gary Thomas 0 siblings, 1 reply; 9+ messages in thread From: Gary Thomas @ 2012-07-15 20:24 UTC (permalink / raw) To: Sergio Aguirre; +Cc: Chris Lalancette, Laurent Pinchart, Linux Media Discussion On 2012-07-15 08:31, Sergio Aguirre wrote: > Hi Gary, > > On Fri, Jul 13, 2012 at 5:24 AM, Gary Thomas <gary@mlbassoc.com> wrote: >> On 2012-07-12 20:30, Sergio Aguirre wrote: >>> >>> Hi Gary, >>> >>> On Tue, Jul 10, 2012 at 2:31 PM, Gary Thomas <gary@mlbassoc.com> wrote: >>>> >>>> On 2012-07-10 11:05, Chris Lalancette wrote: >>>>> >>>>> >>>>> On Tue, Jul 10, 2012 at 9:41 AM, Gary Thomas <gary@mlbassoc.com> wrote: >>>>>> >>>>>> >>>>>> I'm looking for video support on OMAP4 platforms. I've found the >>>>>> PandaBoard camera project >>>>>> (http://www.omappedia.org/wiki/PandaBoard_Camera_Support) >>>>>> and this is starting to work. That said, I'm having some >>>>>> issues with setting up the pipeline, etc. >>>>>> >>>>>> Can this list help out? >>>>> >>>>> >>>>> >>>>> I'm not sure exactly what kind of cameras you want to get working, but >>>>> if you are looking to get CSI2 cameras going through the ISS, Sergio >>>>> Aguirre has been working on support. He also works on the media-ctl >>>>> tool, which is used for configuring the media framework pipeline. The >>>>> latest versions that I am aware of are here: >>>>> >>>>> git://gitorious.org/omap4-v4l2-camera/omap4-v4l2-camera.git >>>> >>>> >>>> >>>> Yes, this is the tree I've been working with (pointed to by the page I >>>> mentioned). >>>> >>>> My kernel can see the camera OV5650 and set up the pipeline. I am able >>>> to >>>> grab >>>> the raw SGRBG10 data but I'd like to get the ISS to convert this to a >>>> more >>>> usable >>>> UYVY format. Here's what I tried: >>>> media-ctl -r >>>> media-ctl -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 [1]' >>>> media-ctl -l '"OMAP4 ISS ISP IPIPEIF":1 -> "OMAP4 ISS ISP IPIPEIF >>>> output":0 [1]' >>>> media-ctl -f '"ov5650 3-0036":0 [SGRBG10 2592x1944]' >>>> media-ctl -f '"OMAP4 ISS CSI2a":0 [SGRBG10 2592x1944]' >>>> media-ctl -f '"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 2592x1944]','"OMAP4 >>>> ISS >>>> ISP IPIPEIF":1 [UYVY 2592x1944]' >>>> >>>> Sadly, I can't get the IPIPEIF element to take SGRGB10 in and put UYVY >>>> out >>>> (my reading >>>> of the manual implies that this _should_ be possible). I always see this >>>> pipeline setup: >>>> - entity 5: OMAP4 ISS ISP IPIPEIF (3 pads, 4 links) >>>> type V4L2 subdev subtype Unknown >>>> device node name /dev/v4l-subdev2 >>>> pad0: Input [SGRBG10 2592x1944] >>>> <- 'OMAP4 ISS CSI2a':pad1 [ACTIVE] >>>> <- 'OMAP4 ISS CSI2b':pad1 [] >>>> pad1: Output [SGRBG10 2592x1944] >>>> -> 'OMAP4 ISS ISP IPIPEIF output':pad0 [ACTIVE] >>>> pad2: Output [SGRBG10 2592x1944] >>>> -> 'OMAP4 ISS ISP resizer':pad0 [] >>>> >>>> Am I missing something? How can I make this conversion in the ISS? >>> >>> >>> The core problem is that, i haven't published any support for >>> RAW10->YUV conversion, >>> which is part of the IPIPE module (not the IPIPEIF, like you mention). I >>> had >>> some patches, but sadly it is unfinished work. :/ >>> >>> Now, there's a main non-technical problem... I no longer work at TI >>> since end of June >>> this year, and I don't have the right HW setup available anymore. >>> Those sensors were >>> company's asset, and I couldn't keep any. >>> >>> Now, we can make this work with cooperation of someone who has the right >>> setup, >>> and me sharing my patches and some advice on my experience. >>> >>> What do you think? >>> >>>> >>>> Note: if this is not the appropriate place to ask these questions, please >>>> redirect me (hopefully to a useful list :-) >>> >>> >>> As I'm the main person who has been actively developing this, I'm your >>> guy to ask questions :). >>> >>> By the way, this development has been my initiative the whole time, >>> and not an official >>> TI objective, so, to be honest, asking TI for official support won't >>> help much right now. >> >> >> Tell me how I can help make this happen. I'll be glad to apply patches, >> figure out bugs, etc, I just need a little help with getting started. >> I have access to the hardware and it's really important that I make some >> progress on this soon. >> >> Can you share your RAW10->YUV patches and some guidance on how to proceed? > > Sure. I just pushed an internal branch I had, named: "devel-ISPSUPPORT-IPIPE", > please take that as a base. > > And please try these commands: > > media-ctl -r -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 > [1]','"OMAP4 ISS ISP IPIPEIF":2 -> "OMAP4 ISS ISP IPIPE":0 > [1]','"OMAP4 ISS ISP IPIPE":1 -> "OMAP4 ISS ISP resizer":0 > [1]','"OMAP4 ISS ISP resizer":1 -> "OMAP4 ISS ISP resizer a output":0 > [1]' > > media-ctl -f '"ov5650 3-0036":0 [SGRBG10 2592x1944]','"OMAP4 ISS > CSI2a":0 [SGRBG10 2592x1944]','"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 > 2592x1944]','"OMAP4 ISS ISP IPIPE":0 [SGRBG10 2592x1944]','"OMAP4 ISS > ISP resizer":0 [UYVY 2592x1944]' > > yavta /dev/video3 -c4 -n1 -s2592x1944 -fUYVY -Fov5650_2592x1944_UYVY_8bpp.yuv With the new branch, I am able to set up the pipeline for UYVY. That part's good. However, just like before, with either RAW10 or UYVY, the grab process does not start more times than it does (it only starts about 1 out of 10 tries). If I just ^C and try again, it may start, it may not. The single time I was able to get the UYVY capture to work, I got an error after the first frame: # grab-uyvy Device /dev/video3 opened. Device `OMAP4 ISS ISP resizer a output' on `media' is a video capture device. Video format set: UYVY (59565955) 2592x1944 buffer size 10077696 Video format: UYVY (59565955) 2592x1944 buffer size 10077696 [ 622.039733] omap4iss omap4iss: dma_alloc_coherent of size 10077696 failed 1 buffers requested. length: 10077696 offset: 0 Buffer 0 mapped at address 0xb64a2000. 0 (0) [-] 0 1007[ 623.131347] omap4iss omap4iss: RSZ Err: FIFO_IN_BLK:0, FIFO_OVF:1, 7696 bytes 623.118776 1342383344.713594 0.001 fps [ 623.297790] omap4iss omap4iss: RSZ Err: FIFO_IN_BLK:1, FIFO_OVF:0, What can I look at to figure out why the capture is hanging? I already enabled a debug print in the ISR and see that only fires when it works. There are no interrupts from the CSI2a when it fails. Any hints as to where & what to check (print registers, etc) would be a big help. Thanks > >> >> I have been able to capture RAW10 data, but often the whole thing just sits >> there (hangs). Restarting the process sometimes works, sometimes not. >> Looking >> at the registers and the actual signals on a scope do not show any >> difference >> that we can find. Any ideas what might cause this? Have you seen it as >> well? > > Can you please try again with the before mentioned branch? The branch you > were using didn't have some changes, so maybe this new one would take > care of that. > >> >> Thanks for the help - Please let me know how I can get this working... > > Well, thanks for the patience! > > Regards, > Sergio -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: OMAP4 support 2012-07-15 20:24 ` Gary Thomas @ 2012-07-25 14:10 ` Gary Thomas 0 siblings, 0 replies; 9+ messages in thread From: Gary Thomas @ 2012-07-25 14:10 UTC (permalink / raw) To: Sergio Aguirre; +Cc: Chris Lalancette, Laurent Pinchart, Linux Media Discussion Ping? Can anyone help me with these issues? On 2012-07-15 14:24, Gary Thomas wrote: > On 2012-07-15 08:31, Sergio Aguirre wrote: >> Hi Gary, >> >> On Fri, Jul 13, 2012 at 5:24 AM, Gary Thomas <gary@mlbassoc.com> wrote: >>> On 2012-07-12 20:30, Sergio Aguirre wrote: >>>> >>>> Hi Gary, >>>> >>>> On Tue, Jul 10, 2012 at 2:31 PM, Gary Thomas <gary@mlbassoc.com> wrote: >>>>> >>>>> On 2012-07-10 11:05, Chris Lalancette wrote: >>>>>> >>>>>> >>>>>> On Tue, Jul 10, 2012 at 9:41 AM, Gary Thomas <gary@mlbassoc.com> wrote: >>>>>>> >>>>>>> >>>>>>> I'm looking for video support on OMAP4 platforms. I've found the >>>>>>> PandaBoard camera project >>>>>>> (http://www.omappedia.org/wiki/PandaBoard_Camera_Support) >>>>>>> and this is starting to work. That said, I'm having some >>>>>>> issues with setting up the pipeline, etc. >>>>>>> >>>>>>> Can this list help out? >>>>>> >>>>>> >>>>>> >>>>>> I'm not sure exactly what kind of cameras you want to get working, but >>>>>> if you are looking to get CSI2 cameras going through the ISS, Sergio >>>>>> Aguirre has been working on support. He also works on the media-ctl >>>>>> tool, which is used for configuring the media framework pipeline. The >>>>>> latest versions that I am aware of are here: >>>>>> >>>>>> git://gitorious.org/omap4-v4l2-camera/omap4-v4l2-camera.git >>>>> >>>>> >>>>> >>>>> Yes, this is the tree I've been working with (pointed to by the page I >>>>> mentioned). >>>>> >>>>> My kernel can see the camera OV5650 and set up the pipeline. I am able >>>>> to >>>>> grab >>>>> the raw SGRBG10 data but I'd like to get the ISS to convert this to a >>>>> more >>>>> usable >>>>> UYVY format. Here's what I tried: >>>>> media-ctl -r >>>>> media-ctl -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 [1]' >>>>> media-ctl -l '"OMAP4 ISS ISP IPIPEIF":1 -> "OMAP4 ISS ISP IPIPEIF >>>>> output":0 [1]' >>>>> media-ctl -f '"ov5650 3-0036":0 [SGRBG10 2592x1944]' >>>>> media-ctl -f '"OMAP4 ISS CSI2a":0 [SGRBG10 2592x1944]' >>>>> media-ctl -f '"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 2592x1944]','"OMAP4 >>>>> ISS >>>>> ISP IPIPEIF":1 [UYVY 2592x1944]' >>>>> >>>>> Sadly, I can't get the IPIPEIF element to take SGRGB10 in and put UYVY >>>>> out >>>>> (my reading >>>>> of the manual implies that this _should_ be possible). I always see this >>>>> pipeline setup: >>>>> - entity 5: OMAP4 ISS ISP IPIPEIF (3 pads, 4 links) >>>>> type V4L2 subdev subtype Unknown >>>>> device node name /dev/v4l-subdev2 >>>>> pad0: Input [SGRBG10 2592x1944] >>>>> <- 'OMAP4 ISS CSI2a':pad1 [ACTIVE] >>>>> <- 'OMAP4 ISS CSI2b':pad1 [] >>>>> pad1: Output [SGRBG10 2592x1944] >>>>> -> 'OMAP4 ISS ISP IPIPEIF output':pad0 [ACTIVE] >>>>> pad2: Output [SGRBG10 2592x1944] >>>>> -> 'OMAP4 ISS ISP resizer':pad0 [] >>>>> >>>>> Am I missing something? How can I make this conversion in the ISS? >>>> >>>> >>>> The core problem is that, i haven't published any support for >>>> RAW10->YUV conversion, >>>> which is part of the IPIPE module (not the IPIPEIF, like you mention). I >>>> had >>>> some patches, but sadly it is unfinished work. :/ >>>> >>>> Now, there's a main non-technical problem... I no longer work at TI >>>> since end of June >>>> this year, and I don't have the right HW setup available anymore. >>>> Those sensors were >>>> company's asset, and I couldn't keep any. >>>> >>>> Now, we can make this work with cooperation of someone who has the right >>>> setup, >>>> and me sharing my patches and some advice on my experience. >>>> >>>> What do you think? >>>> >>>>> >>>>> Note: if this is not the appropriate place to ask these questions, please >>>>> redirect me (hopefully to a useful list :-) >>>> >>>> >>>> As I'm the main person who has been actively developing this, I'm your >>>> guy to ask questions :). >>>> >>>> By the way, this development has been my initiative the whole time, >>>> and not an official >>>> TI objective, so, to be honest, asking TI for official support won't >>>> help much right now. >>> >>> >>> Tell me how I can help make this happen. I'll be glad to apply patches, >>> figure out bugs, etc, I just need a little help with getting started. >>> I have access to the hardware and it's really important that I make some >>> progress on this soon. >>> >>> Can you share your RAW10->YUV patches and some guidance on how to proceed? >> >> Sure. I just pushed an internal branch I had, named: "devel-ISPSUPPORT-IPIPE", >> please take that as a base. >> >> And please try these commands: >> >> media-ctl -r -l '"OMAP4 ISS CSI2a":1 -> "OMAP4 ISS ISP IPIPEIF":0 >> [1]','"OMAP4 ISS ISP IPIPEIF":2 -> "OMAP4 ISS ISP IPIPE":0 >> [1]','"OMAP4 ISS ISP IPIPE":1 -> "OMAP4 ISS ISP resizer":0 >> [1]','"OMAP4 ISS ISP resizer":1 -> "OMAP4 ISS ISP resizer a output":0 >> [1]' >> >> media-ctl -f '"ov5650 3-0036":0 [SGRBG10 2592x1944]','"OMAP4 ISS >> CSI2a":0 [SGRBG10 2592x1944]','"OMAP4 ISS ISP IPIPEIF":0 [SGRBG10 >> 2592x1944]','"OMAP4 ISS ISP IPIPE":0 [SGRBG10 2592x1944]','"OMAP4 ISS >> ISP resizer":0 [UYVY 2592x1944]' >> >> yavta /dev/video3 -c4 -n1 -s2592x1944 -fUYVY -Fov5650_2592x1944_UYVY_8bpp.yuv > > With the new branch, I am able to set up the pipeline for UYVY. That part's good. > > However, just like before, with either RAW10 or UYVY, the grab process does not > start more times than it does (it only starts about 1 out of 10 tries). If I > just ^C and try again, it may start, it may not. > > The single time I was able to get the UYVY capture to work, I got an error after > the first frame: > > # grab-uyvy > Device /dev/video3 opened. > Device `OMAP4 ISS ISP resizer a output' on `media' is a video capture device. > Video format set: UYVY (59565955) 2592x1944 buffer size 10077696 > Video format: UYVY (59565955) 2592x1944 buffer size 10077696 > [ 622.039733] omap4iss omap4iss: dma_alloc_coherent of size 10077696 failed > 1 buffers requested. > length: 10077696 offset: 0 > Buffer 0 mapped at address 0xb64a2000. > 0 (0) [-] 0 1007[ 623.131347] omap4iss omap4iss: RSZ Err: FIFO_IN_BLK:0, FIFO_OVF:1, > 7696 bytes 623.118776 1342383344.713594 0.001 fps > [ 623.297790] omap4iss omap4iss: RSZ Err: FIFO_IN_BLK:1, FIFO_OVF:0, > > What can I look at to figure out why the capture is hanging? I already enabled > a debug print in the ISR and see that only fires when it works. There are no > interrupts from the CSI2a when it fails. > > Any hints as to where & what to check (print registers, etc) would be a big help. > > Thanks > >> >>> >>> I have been able to capture RAW10 data, but often the whole thing just sits >>> there (hangs). Restarting the process sometimes works, sometimes not. >>> Looking >>> at the registers and the actual signals on a scope do not show any >>> difference >>> that we can find. Any ideas what might cause this? Have you seen it as >>> well? >> >> Can you please try again with the before mentioned branch? The branch you >> were using didn't have some changes, so maybe this new one would take >> care of that. >> >>> >>> Thanks for the help - Please let me know how I can get this working... >> >> Well, thanks for the patience! >> >> Regards, >> Sergio > -- Gary Thomas ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2012-07-25 14:17 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2012-07-10 13:41 OMAP4 support Gary Thomas 2012-07-10 17:05 ` Chris Lalancette 2012-07-10 19:31 ` Gary Thomas 2012-07-13 2:30 ` Sergio Aguirre 2012-07-13 10:24 ` Gary Thomas 2012-07-13 11:30 ` Gary Thomas 2012-07-15 14:31 ` Sergio Aguirre 2012-07-15 20:24 ` Gary Thomas 2012-07-25 14:10 ` Gary Thomas
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.