All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
@ 2012-09-10 13:16 ` Florian Vaussard
  0 siblings, 0 replies; 14+ messages in thread
From: Florian Vaussard @ 2012-09-10 13:16 UTC (permalink / raw)
  To: Benoit Cousson
  Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-omap-u79uwXL29TY76Z2rM5mHXA, Steve Sakoman

Hello,

This patch adds the support for the blue LED connected to the LEDB
pin of the TWL4030 on the Gumstix Overo when booting from the device
tree.

Build on top of Benoit's for_3.7/dts tree.

Regards,
Florian


Florian Vaussard (1):
  ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo

 arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

-- 
1.7.5.4

^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH 0/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
@ 2012-09-10 13:16 ` Florian Vaussard
  0 siblings, 0 replies; 14+ messages in thread
From: Florian Vaussard @ 2012-09-10 13:16 UTC (permalink / raw)
  To: linux-arm-kernel

Hello,

This patch adds the support for the blue LED connected to the LEDB
pin of the TWL4030 on the Gumstix Overo when booting from the device
tree.

Build on top of Benoit's for_3.7/dts tree.

Regards,
Florian


Florian Vaussard (1):
  ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo

 arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

-- 
1.7.5.4

^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
  2012-09-10 13:16 ` Florian Vaussard
@ 2012-09-10 13:16   ` Florian Vaussard
  -1 siblings, 0 replies; 14+ messages in thread
From: Florian Vaussard @ 2012-09-10 13:16 UTC (permalink / raw)
  To: Benoit Cousson
  Cc: Tony Lindgren, Steve Sakoman, linux-omap, devicetree-discuss,
	linux-arm-kernel, Florian Vaussard

Support the blue LED connected to the LEDB pin of the TWL4030
on the Gumstix Overo.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
---
 arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index d6cc5e2..89808ce 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -13,6 +13,17 @@
 
 /include/ "omap3.dtsi"
 
+/ {
+	leds {
+		compatible = "gpio-leds";
+		overo {
+			label = "overo:blue:COM";
+			gpios = <&twl_gpio 19 0>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
 &i2c1 {
 	clock-frequency = <2600000>;
 
@@ -40,3 +51,7 @@
 &mmc2 {
 	bus-width = <4>;
 };
+
+&twl_gpio {
+	ti,use-leds;
+};
-- 
1.7.5.4


^ permalink raw reply related	[flat|nested] 14+ messages in thread
* [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
@ 2012-09-10 13:16   ` Florian Vaussard
  0 siblings, 0 replies; 14+ messages in thread
From: Florian Vaussard @ 2012-09-10 13:16 UTC (permalink / raw)
  To: linux-arm-kernel

Support the blue LED connected to the LEDB pin of the TWL4030
on the Gumstix Overo.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
---
 arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index d6cc5e2..89808ce 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -13,6 +13,17 @@
 
 /include/ "omap3.dtsi"
 
+/ {
+	leds {
+		compatible = "gpio-leds";
+		overo {
+			label = "overo:blue:COM";
+			gpios = <&twl_gpio 19 0>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
 &i2c1 {
 	clock-frequency = <2600000>;
 
@@ -40,3 +51,7 @@
 &mmc2 {
 	bus-width = <4>;
 };
+
+&twl_gpio {
+	ti,use-leds;
+};
-- 
1.7.5.4

^ permalink raw reply related	[flat|nested] 14+ messages in thread
* Re: [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
  2012-09-10 13:16   ` Florian Vaussard
@ 2012-09-10 13:25       ` Benoit Cousson
  -1 siblings, 0 replies; 14+ messages in thread
From: Benoit Cousson @ 2012-09-10 13:25 UTC (permalink / raw)
  To: Florian Vaussard
  Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-omap-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Steve Sakoman

On 09/10/2012 03:16 PM, Florian Vaussard wrote:
> Support the blue LED connected to the LEDB pin of the TWL4030
> on the Gumstix Overo.
> 
> Signed-off-by: Florian Vaussard <florian.vaussard-p8DiymsW2f8@public.gmane.org>
> ---
>  arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
>  1 files changed, 15 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
> index d6cc5e2..89808ce 100644
> --- a/arch/arm/boot/dts/omap3-overo.dtsi
> +++ b/arch/arm/boot/dts/omap3-overo.dtsi
> @@ -13,6 +13,17 @@
>  
>  /include/ "omap3.dtsi"
>  
> +/ {

BTW, I'm just wondering. Cannot we use overo without tobi?

In that case, the model and compatible should probably be used as well:

	model = "TI OMAP3 Gumstix Overo";
	compatible = "ti,omap3-overo", "ti,omap3";


> +	leds {
> +		compatible = "gpio-leds";
> +		overo {
> +			label = "overo:blue:COM";
> +			gpios = <&twl_gpio 19 0>;
> +			linux,default-trigger = "mmc0";
> +		};
> +	};
> +};
> +
>  &i2c1 {
>  	clock-frequency = <2600000>;
>  
> @@ -40,3 +51,7 @@
>  &mmc2 {
>  	bus-width = <4>;
>  };
> +
> +&twl_gpio {
> +	ti,use-leds;
> +};
> 

Otherwise, it is fine.

Thanks,
Benoit

^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
@ 2012-09-10 13:25       ` Benoit Cousson
  0 siblings, 0 replies; 14+ messages in thread
From: Benoit Cousson @ 2012-09-10 13:25 UTC (permalink / raw)
  To: linux-arm-kernel

On 09/10/2012 03:16 PM, Florian Vaussard wrote:
> Support the blue LED connected to the LEDB pin of the TWL4030
> on the Gumstix Overo.
> 
> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
> ---
>  arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
>  1 files changed, 15 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
> index d6cc5e2..89808ce 100644
> --- a/arch/arm/boot/dts/omap3-overo.dtsi
> +++ b/arch/arm/boot/dts/omap3-overo.dtsi
> @@ -13,6 +13,17 @@
>  
>  /include/ "omap3.dtsi"
>  
> +/ {

BTW, I'm just wondering. Cannot we use overo without tobi?

In that case, the model and compatible should probably be used as well:

	model = "TI OMAP3 Gumstix Overo";
	compatible = "ti,omap3-overo", "ti,omap3";


> +	leds {
> +		compatible = "gpio-leds";
> +		overo {
> +			label = "overo:blue:COM";
> +			gpios = <&twl_gpio 19 0>;
> +			linux,default-trigger = "mmc0";
> +		};
> +	};
> +};
> +
>  &i2c1 {
>  	clock-frequency = <2600000>;
>  
> @@ -40,3 +51,7 @@
>  &mmc2 {
>  	bus-width = <4>;
>  };
> +
> +&twl_gpio {
> +	ti,use-leds;
> +};
> 

Otherwise, it is fine.

Thanks,
Benoit

^ permalink raw reply	[flat|nested] 14+ messages in thread
* Re: [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
  2012-09-10 13:25       ` Benoit Cousson
@ 2012-09-10 13:33         ` Florian Vaussard
  -1 siblings, 0 replies; 14+ messages in thread
From: Florian Vaussard @ 2012-09-10 13:33 UTC (permalink / raw)
  To: Benoit Cousson
  Cc: Tony Lindgren, Steve Sakoman, linux-omap, devicetree-discuss,
	linux-arm-kernel

>> Support the blue LED connected to the LEDB pin of the TWL4030
>> on the Gumstix Overo.
>>
>> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
>> ---
>>   arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
>>   1 files changed, 15 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
>> index d6cc5e2..89808ce 100644
>> --- a/arch/arm/boot/dts/omap3-overo.dtsi
>> +++ b/arch/arm/boot/dts/omap3-overo.dtsi
>> @@ -13,6 +13,17 @@
>>
>>   /include/ "omap3.dtsi"
>>
>> +/ {
>
> BTW, I'm just wondering. Cannot we use overo without tobi?
>
> In that case, the model and compatible should probably be used as well:
>
> 	model = "TI OMAP3 Gumstix Overo";
> 	compatible = "ti,omap3-overo", "ti,omap3";

No, it cannot. The Overo needs to be plugged into an expansion board, at
least to get the power. Hence the absence of model and compatible in
omap3-overo.dtsi.

Regards,
Florian

^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
@ 2012-09-10 13:33         ` Florian Vaussard
  0 siblings, 0 replies; 14+ messages in thread
From: Florian Vaussard @ 2012-09-10 13:33 UTC (permalink / raw)
  To: linux-arm-kernel

>> Support the blue LED connected to the LEDB pin of the TWL4030
>> on the Gumstix Overo.
>>
>> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
>> ---
>>   arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
>>   1 files changed, 15 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
>> index d6cc5e2..89808ce 100644
>> --- a/arch/arm/boot/dts/omap3-overo.dtsi
>> +++ b/arch/arm/boot/dts/omap3-overo.dtsi
>> @@ -13,6 +13,17 @@
>>
>>   /include/ "omap3.dtsi"
>>
>> +/ {
>
> BTW, I'm just wondering. Cannot we use overo without tobi?
>
> In that case, the model and compatible should probably be used as well:
>
> 	model = "TI OMAP3 Gumstix Overo";
> 	compatible = "ti,omap3-overo", "ti,omap3";

No, it cannot. The Overo needs to be plugged into an expansion board, at
least to get the power. Hence the absence of model and compatible in
omap3-overo.dtsi.

Regards,
Florian

^ permalink raw reply	[flat|nested] 14+ messages in thread
* Re: [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
  2012-09-10 13:33         ` Florian Vaussard
@ 2012-09-10 13:40           ` Benoit Cousson
  -1 siblings, 0 replies; 14+ messages in thread
From: Benoit Cousson @ 2012-09-10 13:40 UTC (permalink / raw)
  To: florian.vaussard
  Cc: Tony Lindgren, Steve Sakoman, linux-omap, devicetree-discuss,
	linux-arm-kernel

On 09/10/2012 03:33 PM, Florian Vaussard wrote:
>>> Support the blue LED connected to the LEDB pin of the TWL4030
>>> on the Gumstix Overo.
>>>
>>> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
>>> ---
>>>   arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
>>>   1 files changed, 15 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/omap3-overo.dtsi
>>> b/arch/arm/boot/dts/omap3-overo.dtsi
>>> index d6cc5e2..89808ce 100644
>>> --- a/arch/arm/boot/dts/omap3-overo.dtsi
>>> +++ b/arch/arm/boot/dts/omap3-overo.dtsi
>>> @@ -13,6 +13,17 @@
>>>
>>>   /include/ "omap3.dtsi"
>>>
>>> +/ {
>>
>> BTW, I'm just wondering. Cannot we use overo without tobi?
>>
>> In that case, the model and compatible should probably be used as well:
>>
>>     model = "TI OMAP3 Gumstix Overo";
>>     compatible = "ti,omap3-overo", "ti,omap3";
> 
> No, it cannot. The Overo needs to be plugged into an expansion board, at
> least to get the power. Hence the absence of model and compatible in
> omap3-overo.dtsi.

OK, cool. I was wondering because we already have a board-overo.c in the
kernel, and there is no mention of tobi.

OK, I'm adding that patch on top of the other then.

Regards,
Benoit


^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
@ 2012-09-10 13:40           ` Benoit Cousson
  0 siblings, 0 replies; 14+ messages in thread
From: Benoit Cousson @ 2012-09-10 13:40 UTC (permalink / raw)
  To: linux-arm-kernel

On 09/10/2012 03:33 PM, Florian Vaussard wrote:
>>> Support the blue LED connected to the LEDB pin of the TWL4030
>>> on the Gumstix Overo.
>>>
>>> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
>>> ---
>>>   arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
>>>   1 files changed, 15 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/omap3-overo.dtsi
>>> b/arch/arm/boot/dts/omap3-overo.dtsi
>>> index d6cc5e2..89808ce 100644
>>> --- a/arch/arm/boot/dts/omap3-overo.dtsi
>>> +++ b/arch/arm/boot/dts/omap3-overo.dtsi
>>> @@ -13,6 +13,17 @@
>>>
>>>   /include/ "omap3.dtsi"
>>>
>>> +/ {
>>
>> BTW, I'm just wondering. Cannot we use overo without tobi?
>>
>> In that case, the model and compatible should probably be used as well:
>>
>>     model = "TI OMAP3 Gumstix Overo";
>>     compatible = "ti,omap3-overo", "ti,omap3";
> 
> No, it cannot. The Overo needs to be plugged into an expansion board, at
> least to get the power. Hence the absence of model and compatible in
> omap3-overo.dtsi.

OK, cool. I was wondering because we already have a board-overo.c in the
kernel, and there is no mention of tobi.

OK, I'm adding that patch on top of the other then.

Regards,
Benoit

^ permalink raw reply	[flat|nested] 14+ messages in thread
* Re: [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
  2012-09-10 13:40           ` Benoit Cousson
@ 2012-09-10 13:49               ` Benoit Cousson
  -1 siblings, 0 replies; 14+ messages in thread
From: Benoit Cousson @ 2012-09-10 13:49 UTC (permalink / raw)
  To: florian.vaussard-p8DiymsW2f8
  Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-omap-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Steve Sakoman

On 09/10/2012 03:40 PM, Benoit Cousson wrote:
> On 09/10/2012 03:33 PM, Florian Vaussard wrote:
>>>> Support the blue LED connected to the LEDB pin of the TWL4030
>>>> on the Gumstix Overo.
>>>>
>>>> Signed-off-by: Florian Vaussard <florian.vaussard-p8DiymsW2f8@public.gmane.org>
>>>> ---
>>>>   arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
>>>>   1 files changed, 15 insertions(+), 0 deletions(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/omap3-overo.dtsi
>>>> b/arch/arm/boot/dts/omap3-overo.dtsi
>>>> index d6cc5e2..89808ce 100644
>>>> --- a/arch/arm/boot/dts/omap3-overo.dtsi
>>>> +++ b/arch/arm/boot/dts/omap3-overo.dtsi
>>>> @@ -13,6 +13,17 @@
>>>>
>>>>   /include/ "omap3.dtsi"
>>>>
>>>> +/ {
>>>
>>> BTW, I'm just wondering. Cannot we use overo without tobi?
>>>
>>> In that case, the model and compatible should probably be used as well:
>>>
>>>     model = "TI OMAP3 Gumstix Overo";
>>>     compatible = "ti,omap3-overo", "ti,omap3";
>>
>> No, it cannot. The Overo needs to be plugged into an expansion board, at
>> least to get the power. Hence the absence of model and compatible in
>> omap3-overo.dtsi.
> 
> OK, cool. I was wondering because we already have a board-overo.c in the
> kernel, and there is no mention of tobi.
> 
> OK, I'm adding that patch on top of the other then.

I'm just going to update the subject to:
ARM: dts: omap3-overo: Add support for the blue LED

regards,
Benoit

^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
@ 2012-09-10 13:49               ` Benoit Cousson
  0 siblings, 0 replies; 14+ messages in thread
From: Benoit Cousson @ 2012-09-10 13:49 UTC (permalink / raw)
  To: linux-arm-kernel

On 09/10/2012 03:40 PM, Benoit Cousson wrote:
> On 09/10/2012 03:33 PM, Florian Vaussard wrote:
>>>> Support the blue LED connected to the LEDB pin of the TWL4030
>>>> on the Gumstix Overo.
>>>>
>>>> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
>>>> ---
>>>>   arch/arm/boot/dts/omap3-overo.dtsi |   15 +++++++++++++++
>>>>   1 files changed, 15 insertions(+), 0 deletions(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/omap3-overo.dtsi
>>>> b/arch/arm/boot/dts/omap3-overo.dtsi
>>>> index d6cc5e2..89808ce 100644
>>>> --- a/arch/arm/boot/dts/omap3-overo.dtsi
>>>> +++ b/arch/arm/boot/dts/omap3-overo.dtsi
>>>> @@ -13,6 +13,17 @@
>>>>
>>>>   /include/ "omap3.dtsi"
>>>>
>>>> +/ {
>>>
>>> BTW, I'm just wondering. Cannot we use overo without tobi?
>>>
>>> In that case, the model and compatible should probably be used as well:
>>>
>>>     model = "TI OMAP3 Gumstix Overo";
>>>     compatible = "ti,omap3-overo", "ti,omap3";
>>
>> No, it cannot. The Overo needs to be plugged into an expansion board, at
>> least to get the power. Hence the absence of model and compatible in
>> omap3-overo.dtsi.
> 
> OK, cool. I was wondering because we already have a board-overo.c in the
> kernel, and there is no mention of tobi.
> 
> OK, I'm adding that patch on top of the other then.

I'm just going to update the subject to:
ARM: dts: omap3-overo: Add support for the blue LED

regards,
Benoit

^ permalink raw reply	[flat|nested] 14+ messages in thread
* Re: [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
  2012-09-10 13:40           ` Benoit Cousson
@ 2012-09-10 14:07             ` Florian Vaussard
  -1 siblings, 0 replies; 14+ messages in thread
From: Florian Vaussard @ 2012-09-10 14:07 UTC (permalink / raw)
  To: Benoit Cousson
  Cc: Tony Lindgren, Steve Sakoman, linux-omap, devicetree-discuss,
	linux-arm-kernel

>>>
>>> BTW, I'm just wondering. Cannot we use overo without tobi?
>>>
>>> In that case, the model and compatible should probably be used as well:
>>>
>>>      model = "TI OMAP3 Gumstix Overo";
>>>      compatible = "ti,omap3-overo", "ti,omap3";
>>
>> No, it cannot. The Overo needs to be plugged into an expansion board, at
>> least to get the power. Hence the absence of model and compatible in
>> omap3-overo.dtsi.
>
> OK, cool. I was wondering because we already have a board-overo.c in the
> kernel, and there is no mention of tobi.

In board-overo.c, the various features of each expansion board are
configured using CONFIG_* options, which is not possible when booting
with a device tree.

Regards,
Florian

^ permalink raw reply	[flat|nested] 14+ messages in thread
* [PATCH 1/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo
@ 2012-09-10 14:07             ` Florian Vaussard
  0 siblings, 0 replies; 14+ messages in thread
From: Florian Vaussard @ 2012-09-10 14:07 UTC (permalink / raw)
  To: linux-arm-kernel

>>>
>>> BTW, I'm just wondering. Cannot we use overo without tobi?
>>>
>>> In that case, the model and compatible should probably be used as well:
>>>
>>>      model = "TI OMAP3 Gumstix Overo";
>>>      compatible = "ti,omap3-overo", "ti,omap3";
>>
>> No, it cannot. The Overo needs to be plugged into an expansion board, at
>> least to get the power. Hence the absence of model and compatible in
>> omap3-overo.dtsi.
>
> OK, cool. I was wondering because we already have a board-overo.c in the
> kernel, and there is no mention of tobi.

In board-overo.c, the various features of each expansion board are
configured using CONFIG_* options, which is not possible when booting
with a device tree.

Regards,
Florian

^ permalink raw reply	[flat|nested] 14+ messages in thread
end of thread, other threads:[~2012-09-10 14:07 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-09-10 13:16 [PATCH 0/1] ARM: dts: OMAP3: Add gpio-twl4030 properties for Overo Florian Vaussard
2012-09-10 13:16 ` Florian Vaussard
2012-09-10 13:16 ` [PATCH 1/1] " Florian Vaussard
2012-09-10 13:16   ` Florian Vaussard
     [not found]   ` <1347282996-31190-2-git-send-email-florian.vaussard-p8DiymsW2f8@public.gmane.org>
2012-09-10 13:25     ` Benoit Cousson
2012-09-10 13:25       ` Benoit Cousson
2012-09-10 13:33       ` Florian Vaussard
2012-09-10 13:33         ` Florian Vaussard
2012-09-10 13:40         ` Benoit Cousson
2012-09-10 13:40           ` Benoit Cousson
     [not found]           ` <504DEDB4.1070804-l0cyMroinI0@public.gmane.org>
2012-09-10 13:49             ` Benoit Cousson
2012-09-10 13:49               ` Benoit Cousson
2012-09-10 14:07           ` Florian Vaussard
2012-09-10 14:07             ` Florian Vaussard

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.