* [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot @ 2012-09-24 19:09 Jari Lietzen 2012-09-26 21:30 ` Gilles Chanteperdrix 0 siblings, 1 reply; 16+ messages in thread From: Jari Lietzen @ 2012-09-24 19:09 UTC (permalink / raw) To: xenomai Hi! Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". If I try to use Xenomai 2.6.1 the error message displayed is the same and system just hangs after that. No other messages, keyboard doesn't work, nothing. I started with the same kernel configuration, but I have disabled a few options more (e.g. syscall auditing, shared interrupt support). I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. Obviously I'm missing something, but I can't figure that out. Here is the kernel config file: # # Automatically generated make config: don't edit # Linux/x86_64 2.6.37.6 Kernel Configuration # Mon Sep 24 21:19:48 2012 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y CONFIG_HAVE_IRQ_WORK=y CONFIG_IRQ_WORK=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="-ipipex" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set CONFIG_HAVE_GENERIC_HARDIRQS=y # # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set CONFIG_HAVE_SPARSE_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_AUTO_IRQ_AFFINITY is not set # CONFIG_IRQ_PER_CPU is not set # CONFIG_HARDIRQS_SW_RESEND is not set # CONFIG_SPARSE_IRQ is not set # # RCU Subsystem # CONFIG_TREE_PREEMPT_RCU=y CONFIG_PREEMPT_RCU=y # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y # CONFIG_BLK_CGROUP is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_MM_OWNER=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=m CONFIG_OPROFILE_EVENT_MULTIPLEX=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y # CONFIG_JUMP_LABEL is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_ARCH_JUMP_LABEL=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_INTEGRITY=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set # CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set # CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set CONFIG_MUTEX_SPIN_ON_OWNER=y # # Real-time sub-system # CONFIG_XENOMAI=y CONFIG_XENO_GENERIC_STACKPOOL=y CONFIG_XENO_FASTSYNCH=y CONFIG_XENO_OPT_NUCLEUS=y CONFIG_XENO_OPT_PERVASIVE=y CONFIG_XENO_OPT_PRIOCPL=y CONFIG_XENO_OPT_PIPELINE_HEAD=y # CONFIG_XENO_OPT_SCHED_CLASSES is not set CONFIG_XENO_OPT_PIPE=y CONFIG_XENO_OPT_VFILE=y CONFIG_XENO_OPT_PIPE_NRDEV=32 CONFIG_XENO_OPT_REGISTRY_NRSLOTS=512 CONFIG_XENO_OPT_SYS_HEAPSZ=256 CONFIG_XENO_OPT_SYS_STACKPOOLSZ=128 CONFIG_XENO_OPT_SEM_HEAPSZ=12 CONFIG_XENO_OPT_GLOBAL_SEM_HEAPSZ=12 CONFIG_XENO_OPT_STATS=y # CONFIG_XENO_OPT_DEBUG is not set CONFIG_XENO_OPT_SHIRQ=y CONFIG_XENO_OPT_HOSTRT=y # # Timing # # CONFIG_XENO_OPT_TIMING_PERIODIC is not set CONFIG_XENO_OPT_TIMING_VIRTICK=1000 CONFIG_XENO_OPT_TIMING_SCHEDLAT=0 # # Scalability # # CONFIG_XENO_OPT_SCALABLE_SCHED is not set CONFIG_XENO_OPT_TIMER_LIST=y # CONFIG_XENO_OPT_TIMER_HEAP is not set # CONFIG_XENO_OPT_TIMER_WHEEL is not set # # Machine # CONFIG_XENO_HW_FPU=y # # SMI workaround # # CONFIG_XENO_HW_SMI_DETECT_DISABLE is not set CONFIG_XENO_HW_SMI_DETECT=y CONFIG_XENO_HW_SMI_WORKAROUND=y CONFIG_XENO_HW_SMI_ALL=y # # Interfaces # CONFIG_XENO_SKIN_NATIVE=y CONFIG_XENO_OPT_NATIVE_PERIOD=0 CONFIG_XENO_OPT_NATIVE_PIPE=y CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=1024 CONFIG_XENO_OPT_NATIVE_SEM=y CONFIG_XENO_OPT_NATIVE_EVENT=y CONFIG_XENO_OPT_NATIVE_MUTEX=y CONFIG_XENO_OPT_NATIVE_COND=y CONFIG_XENO_OPT_NATIVE_QUEUE=y CONFIG_XENO_OPT_NATIVE_BUFFER=y CONFIG_XENO_OPT_NATIVE_HEAP=y CONFIG_XENO_OPT_NATIVE_ALARM=y CONFIG_XENO_OPT_NATIVE_MPS=y # CONFIG_XENO_OPT_NATIVE_INTR is not set CONFIG_XENO_SKIN_POSIX=y CONFIG_XENO_OPT_POSIX_PERIOD=0 # CONFIG_XENO_OPT_POSIX_SHM is not set # CONFIG_XENO_OPT_POSIX_INTR is not set # CONFIG_XENO_OPT_POSIX_SELECT is not set # CONFIG_XENO_OPT_DEBUG_POSIX is not set # CONFIG_XENO_SKIN_PSOS is not set # CONFIG_XENO_SKIN_UITRON is not set # CONFIG_XENO_SKIN_VRTX is not set # CONFIG_XENO_SKIN_VXWORKS is not set # CONFIG_XENO_OPT_NOWARN_DEPRECATED is not set CONFIG_XENO_SKIN_RTDM=y CONFIG_XENO_OPT_RTDM_PERIOD=0 CONFIG_XENO_OPT_RTDM_FILDES=128 # CONFIG_XENO_OPT_RTDM_SELECT is not set # # Drivers # # # Serial drivers # # CONFIG_XENO_DRIVERS_16550A is not set # # Testing drivers # CONFIG_XENO_DRIVERS_TIMERBENCH=y # CONFIG_XENO_DRIVERS_KLATENCY is not set # CONFIG_XENO_DRIVERS_IRQBENCH is not set CONFIG_XENO_DRIVERS_SWITCHTEST=y # CONFIG_XENO_DRIVERS_RTDMTEST is not set # # CAN drivers # # CONFIG_XENO_DRIVERS_CAN is not set # # ANALOGY drivers # # CONFIG_XENO_DRIVERS_ANALOGY is not set # # Real-time IPC drivers # # CONFIG_XENO_DRIVERS_RTIPC is not set CONFIG_FREEZER=y # # Processor type and features # # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_MPPARSE=y # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_NO_BOOTMEM=y # CONFIG_MEMTEST is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set CONFIG_MCORE2=y # CONFIG_MATOM is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set # CONFIG_AMD_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=4 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y CONFIG_IRQ_TIME_ACCOUNTING=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_IPIPE=y CONFIG_IPIPE_DOMAINS=4 CONFIG_IPIPE_DELAYED_ATOMICSW=y # CONFIG_IPIPE_UNMASKED_CONTEXT_SWITCH is not set CONFIG_HAVE_IPIPE_HOSTRT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_X86_MCE_AMD is not set CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y # CONFIG_I8K is not set CONFIG_MICROCODE=m CONFIG_MICROCODE_INTEL=y # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_COMPACTION is not set CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y # CONFIG_EFI is not set CONFIG_SECCOMP=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000 # CONFIG_HOTPLUG_CPU is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set CONFIG_ACPI=y # CONFIG_ACPI_PROCFS is not set # CONFIG_ACPI_PROCFS_POWER is not set # CONFIG_ACPI_POWER_METER is not set # CONFIG_ACPI_EC_DEBUGFS is not set CONFIG_ACPI_PROC_EVENT=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=m # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_DOCK is not set # CONFIG_ACPI_PROCESSOR is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # CONFIG_ACPI_SBS is not set # CONFIG_ACPI_HED is not set # CONFIG_ACPI_APEI is not set # CONFIG_SFI is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # CONFIG_CPU_IDLE is not set # # Memory power savings # # CONFIG_I7300_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_MMCONFIG is not set CONFIG_PCI_DOMAINS=y # CONFIG_PCI_CNB20LE_QUIRK is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_PCIE_ECRC=y CONFIG_PCIEAER_INJECT=m CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_STUB=y CONFIG_HT_IRQ=y CONFIG_PCI_IOV=y CONFIG_PCI_IOAPIC=y CONFIG_ISA_DMA_API=y CONFIG_AMD_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IA32_EMULATION is not set # CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set CONFIG_HAVE_TEXT_POKE_SMP=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y CONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y CONFIG_XFRM_STATISTICS=y CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m # CONFIG_NET_IPGRE_DEMUX is not set CONFIG_IP_MROUTE=y # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set CONFIG_NETLABEL=y CONFIG_NETWORK_SECMARK=y # CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=m # CONFIG_NET_SCTPPROBE is not set # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_HMAC_NONE=y # CONFIG_SCTP_HMAC_SHA1 is not set # CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y CONFIG_RPS=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m CONFIG_PARIDE=m # # Parallel IDE high-level drivers # # CONFIG_PARIDE_PD is not set # CONFIG_PARIDE_PCD is not set # CONFIG_PARIDE_PF is not set # CONFIG_PARIDE_PT is not set # CONFIG_PARIDE_PG is not set # # Parallel IDE protocol modules # # CONFIG_PARIDE_ATEN is not set # CONFIG_PARIDE_BPCK is not set # CONFIG_PARIDE_COMM is not set # CONFIG_PARIDE_DSTR is not set # CONFIG_PARIDE_FIT2 is not set # CONFIG_PARIDE_FIT3 is not set # CONFIG_PARIDE_EPAT is not set # CONFIG_PARIDE_EPIA is not set # CONFIG_PARIDE_FRIQ is not set # CONFIG_PARIDE_FRPW is not set # CONFIG_PARIDE_KBIC is not set # CONFIG_PARIDE_KTTI is not set # CONFIG_PARIDE_ON20 is not set # CONFIG_PARIDE_ON26 is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_DRBD is not set CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_OSD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_RBD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set CONFIG_SCSI_OSD_INITIATOR=m CONFIG_SCSI_OSD_ULD=m CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y # CONFIG_SATA_AHCI_PLATFORM is not set CONFIG_SATA_INIC162X=m CONFIG_SATA_SIL24=m CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # CONFIG_PDC_ADMA=m CONFIG_SATA_QSTOR=m CONFIG_SATA_SX4=m CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y CONFIG_SATA_MV=m CONFIG_SATA_NV=m CONFIG_SATA_PROMISE=m CONFIG_SATA_SIL=m CONFIG_SATA_SIS=m CONFIG_SATA_SVW=m CONFIG_SATA_ULI=m CONFIG_SATA_VIA=m CONFIG_SATA_VITESSE=m # # PATA SFF controllers with BMDMA # CONFIG_PATA_ALI=m CONFIG_PATA_AMD=m CONFIG_PATA_ARTOP=m CONFIG_PATA_ATIIXP=m CONFIG_PATA_ATP867X=m CONFIG_PATA_CMD64X=m CONFIG_PATA_CS5520=m CONFIG_PATA_CS5530=m CONFIG_PATA_CS5536=m CONFIG_PATA_CYPRESS=m CONFIG_PATA_EFAR=m CONFIG_PATA_HPT366=m CONFIG_PATA_HPT37X=m CONFIG_PATA_HPT3X2N=m CONFIG_PATA_HPT3X3=m # CONFIG_PATA_HPT3X3_DMA is not set CONFIG_PATA_IT8213=m CONFIG_PATA_IT821X=m CONFIG_PATA_JMICRON=m CONFIG_PATA_MARVELL=m CONFIG_PATA_NETCELL=m CONFIG_PATA_NINJA32=m CONFIG_PATA_NS87415=m CONFIG_PATA_OLDPIIX=m CONFIG_PATA_OPTIDMA=m CONFIG_PATA_PDC2027X=m CONFIG_PATA_PDC_OLD=m # CONFIG_PATA_RADISYS is not set CONFIG_PATA_RDC=m # CONFIG_PATA_SC1200 is not set CONFIG_PATA_SCH=m CONFIG_PATA_SERVERWORKS=m CONFIG_PATA_SIL680=m CONFIG_PATA_SIS=m # CONFIG_PATA_TOSHIBA is not set CONFIG_PATA_TRIFLEX=m CONFIG_PATA_VIA=m CONFIG_PATA_WINBOND=m # # PIO-only SFF controllers # CONFIG_PATA_CMD640_PCI=m CONFIG_PATA_MPIIX=m CONFIG_PATA_NS87410=m CONFIG_PATA_OPTI=m # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_PATA_ACPI is not set CONFIG_ATA_GENERIC=m # CONFIG_PATA_LEGACY is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m CONFIG_MACVLAN=m # CONFIG_MACVTAP is not set CONFIG_EQUALIZER=m CONFIG_TUN=m CONFIG_VETH=m # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set CONFIG_MII=m CONFIG_PHYLIB=m # # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set CONFIG_BROADCOM_PHY=m CONFIG_BCM63XX_PHY=m # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MICREL_PHY is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=m # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m CONFIG_BNX2=m # CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_STMMAC_ETH is not set # CONFIG_PCH_GBE is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # # CAIF transport drivers # # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PLIP=m # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_INTEL is not set # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_VIA is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 # CONFIG_HPET is not set CONFIG_HANGCHECK_TIMER=m CONFIG_TCG_TPM=y # CONFIG_TCG_TIS is not set CONFIG_TCG_NSC=m CONFIG_TCG_ATMEL=m # CONFIG_TCG_INFINEON is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_RAMOOPS is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m # CONFIG_I2C_MUX is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI1563=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD756_S4882=m CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m CONFIG_I2C_ISCH=m CONFIG_I2C_PIIX4=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_NFORCE2_S4985=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # # ACPI drivers # # CONFIG_I2C_SCMI is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_GPIO is not set # CONFIG_I2C_INTEL_MID is not set # CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=m CONFIG_I2C_SIMTEC=m # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m # CONFIG_I2C_TAOS_EVM is not set CONFIG_I2C_TINY_USB=m # # Other I2C/SMBus bus drivers # CONFIG_I2C_STUB=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_SPI is not set # # PPS support # CONFIG_PPS=m # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set # CONFIG_PPS_CLIENT_LDISC is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # # CONFIG_GPIO_BASIC_MMIO is not set # CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_SCH is not set # CONFIG_GPIO_VX855 is not set # # I2C GPIO expanders: # # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: # # CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set CONFIG_GPIO_LANGWELL=y # CONFIG_GPIO_PCH is not set # CONFIG_GPIO_RDC321X is not set # # SPI GPIO expanders: # # # AC97 GPIO expanders: # # # MODULbus GPIO expanders: # CONFIG_W1=m CONFIG_W1_CON=y # # 1-wire Bus Masters # # CONFIG_W1_MASTER_MATROX is not set CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m # CONFIG_W1_MASTER_GPIO is not set # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=m CONFIG_W1_SLAVE_SMEM=m CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m CONFIG_W1_SLAVE_DS2433_CRC=y CONFIG_W1_SLAVE_DS2760=m CONFIG_W1_SLAVE_BQ27000=m CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ20Z75 is not set CONFIG_BATTERY_BQ27x00=m # CONFIG_BATTERY_MAX17040 is not set # CONFIG_CHARGER_ISP1704 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m # CONFIG_SENSORS_ADT7411 is not set CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m # CONFIG_SENSORS_ASC7621 is not set CONFIG_SENSORS_K8TEMP=m # CONFIG_SENSORS_K10TEMP is not set CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_I5K_AMB=m CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_F71882FG=m CONFIG_SENSORS_F75375S=m CONFIG_SENSORS_FSCHMD=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m # CONFIG_SENSORS_GPIO_FAN is not set CONFIG_SENSORS_CORETEMP=m # CONFIG_SENSORS_PKGTEMP is not set CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m CONFIG_SENSORS_IT87=m # CONFIG_SENSORS_JC42 is not set CONFIG_SENSORS_LM63=m # CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m CONFIG_SENSORS_LTC4215=m CONFIG_SENSORS_LTC4245=m # CONFIG_SENSORS_LTC4261 is not set CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SIS5595=m # CONFIG_SENSORS_SMM665 is not set CONFIG_SENSORS_DME1737=m # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_ADS7828=m # CONFIG_SENSORS_AMC6821 is not set CONFIG_SENSORS_THMC50=m # CONFIG_SENSORS_TMP102 is not set CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m # CONFIG_SENSORS_VIA_CPUTEMP is not set CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83793=m # CONFIG_SENSORS_W83795 is not set CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m # CONFIG_SENSORS_LIS3_I2C is not set CONFIG_SENSORS_APPLESMC=m # # ACPI drivers # # CONFIG_SENSORS_ATK0110 is not set # CONFIG_SENSORS_LIS3LV02D is not set CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m # CONFIG_F71808E_WDT is not set # CONFIG_SC520_WDT is not set CONFIG_SBC_FITPC2_WATCHDOG=m # CONFIG_EUROTECH_WDT is not set CONFIG_IB700_WDT=m CONFIG_IBMASR=m # CONFIG_WAFER_WDT is not set CONFIG_I6300ESB_WDT=m CONFIG_ITCO_WDT=m CONFIG_ITCO_VENDOR_SUPPORT=y CONFIG_IT8712F_WDT=m CONFIG_IT87_WDT=m CONFIG_HP_WATCHDOG=m # CONFIG_HPWDT_NMI_DECODING is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_CPU5_WDT is not set CONFIG_SMSC_SCH311X_WDT=m # CONFIG_SMSC37B787_WDT is not set CONFIG_W83627HF_WDT=m CONFIG_W83697HF_WDT=m CONFIG_W83697UG_WDT=m CONFIG_W83877F_WDT=m CONFIG_W83977F_WDT=m CONFIG_MACHZ_WDT=m # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m # # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # CONFIG_SSB=m CONFIG_SSB_PCIHOST_POSSIBLE=y # CONFIG_SSB_PCIHOST is not set # CONFIG_SSB_DEBUG is not set # CONFIG_MFD_SUPPORT is not set CONFIG_MFD_CORE=m CONFIG_LPC_SCH=m # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # CONFIG_AGP=y # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_VGA_SWITCHEROO is not set CONFIG_DRM=m CONFIG_DRM_KMS_HELPER=m # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set CONFIG_DRM_I915=m CONFIG_DRM_I915_KMS=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_STUB_POULSBO is not set CONFIG_VGASTATE=m CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_TMIO is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m # CONFIG_BACKLIGHT_GENERIC is not set # CONFIG_BACKLIGHT_PROGEAR is not set # CONFIG_BACKLIGHT_MBP_NVIDIA is not set # CONFIG_BACKLIGHT_SAHARA is not set # CONFIG_BACKLIGHT_ADP8860 is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # # Special HID drivers # # CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y # CONFIG_HID_ACRUX_FF is not set CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y # CONFIG_HID_CANDO is not set CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set # CONFIG_HID_EGALAX is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_TWINHAN is not set CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWII_FF is not set CONFIG_HID_MICROSOFT=y # CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_QUANTA is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_ROCCAT_KONE is not set # CONFIG_HID_ROCCAT_PYRA is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_STANTUM is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_MON=y CONFIG_USB_WUSB=m CONFIG_USB_WUSB_CBAF=m # CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=m # CONFIG_USB_XHCI_HCD_DEBUGGING is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_ISP1362_HCD=m CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=m # CONFIG_USB_R8A66597_HCD is not set CONFIG_USB_WHCI_HCD=m CONFIG_USB_HWA_HCD=m # # USB Device Class drivers # CONFIG_USB_ACM=m # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=m CONFIG_USB_STORAGE_FREECOM=m CONFIG_USB_STORAGE_ISD200=m CONFIG_USB_STORAGE_USBAT=m CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=m CONFIG_USB_STORAGE_JUMPSHOT=m CONFIG_USB_STORAGE_ALAUDA=m CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m CONFIG_USB_STORAGE_CYPRESS_ATACB=m # CONFIG_USB_UAS is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set CONFIG_NOP_USB_XCEIV=m CONFIG_UWB=y CONFIG_UWB_HWA=m CONFIG_UWB_WHCI=m # CONFIG_UWB_I1480U is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # # CONFIG_LEDS_ALIX2 is not set # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_LP5523 is not set # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_INTEL_SS4200 is not set # CONFIG_LEDS_LT3593 is not set # CONFIG_LEDS_TRIGGERS is not set # # LED Triggers # # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_DS1374=m CONFIG_RTC_DRV_DS1672=m # CONFIG_RTC_DRV_DS3232 is not set CONFIG_RTC_DRV_MAX6900=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=m # CONFIG_RTC_DRV_ISL12022 is not set CONFIG_RTC_DRV_X1205=m CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set CONFIG_RTC_DRV_FM3130=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_RX8025=m # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_DS1286=m CONFIG_RTC_DRV_DS1511=m CONFIG_RTC_DRV_DS1553=m CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_STK17TA8=m # CONFIG_RTC_DRV_M48T86 is not set CONFIG_RTC_DRV_M48T35=m CONFIG_RTC_DRV_M48T59=m # CONFIG_RTC_DRV_MSM6242 is not set CONFIG_RTC_DRV_BQ4802=m # CONFIG_RTC_DRV_RP5C01 is not set CONFIG_RTC_DRV_V3020=m # # on-CPU RTC drivers # CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # # CONFIG_INTEL_MID_DMAC is not set CONFIG_INTEL_IOATDMA=m # CONFIG_TIMB_DMA is not set # CONFIG_PCH_DMA is not set CONFIG_DMA_ENGINE=y # # DMA Clients # CONFIG_NET_DMA=y CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set CONFIG_DCA=m # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set # CONFIG_X86_PLATFORM_DEVICES is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # CONFIG_DMIID is not set # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4_FS is not set CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_EXPORTFS=m CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_FANOTIFY is not set CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m CONFIG_CUSE=m CONFIG_GENERIC_ACL=y # # Caches # CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set CONFIG_FSCACHE_OBJECT_LIST=y CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="ascii" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=m # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_V4_1=y CONFIG_PNFS_FILE_LAYOUT=m CONFIG_NFS_FSCACHE=y # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y # CONFIG_NFS_USE_NEW_IDMAPPER is not set CONFIG_NFSD=m CONFIG_NFSD_DEPRECATED=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_CEPH_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y # CONFIG_CIFS_STATS2 is not set CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set CONFIG_CIFS_DFS_UPCALL=y # CONFIG_CIFS_FSCACHE is not set # CONFIG_CIFS_ACL is not set CONFIG_CIFS_EXPERIMENTAL=y CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y CONFIG_NCPFS_SMALLDOS=y CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m # CONFIG_NLS_CODEPAGE_857 is not set CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set CONFIG_NLS_ISO8859_5=m # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set CONFIG_NLS_ISO8859_13=m # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y CONFIG_STRIP_ASM_SYMS=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y # CONFIG_IPIPE_DEBUG is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_HARDLOCKUP_DETECTOR is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_BKL is not set # CONFIG_SPARSE_RCU_POINTER is not set CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LKDTM is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FTRACE_NMI_ENTER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACER_MAX_TRACE=y CONFIG_RING_BUFFER=y CONFIG_FTRACE_NMI_ENTER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set CONFIG_SCHED_TRACER=y CONFIG_FTRACE_SYSCALLS=y CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_KPROBE_EVENT=y CONFIG_DYNAMIC_FTRACE=y CONFIG_FUNCTION_PROFILER=y CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_MMIOTRACE is not set CONFIG_RING_BUFFER_BENCHMARK=m # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set CONFIG_BUILD_DOCSRC=y CONFIG_DYNAMIC_DEBUG=y # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_STRICT_DEVMEM=y # CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_OPTIMIZE_INLINING=y # # Security options # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_SMACK is not set # CONFIG_SECURITY_TOMOYO is not set # CONFIG_SECURITY_APPARMOR is not set # CONFIG_IMA is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_SEQIV=m # # Block modes # CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=m CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set # # Ciphers # CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_AES_NI_INTEL is not set CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m # CONFIG_CRYPTO_SALSA20_X86_64 is not set CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # # Compression # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m CONFIG_CRYPTO_DEV_HIFN_795X=m CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y Best regards, -Jari ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-09-24 19:09 [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot Jari Lietzen @ 2012-09-26 21:30 ` Gilles Chanteperdrix 2012-09-27 5:49 ` Jari Lietzen 0 siblings, 1 reply; 16+ messages in thread From: Gilles Chanteperdrix @ 2012-09-26 21:30 UTC (permalink / raw) To: Jari Lietzen; +Cc: xenomai On 09/24/2012 09:09 PM, Jari Lietzen wrote: > Hi! > > Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error > message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". > > If I try to use Xenomai 2.6.1 the error message displayed is the same > and system just hangs after that. No other messages, keyboard doesn't > work, nothing. I started with the same kernel configuration, but I have > disabled a few options more (e.g. syscall auditing, shared interrupt > support). > > I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. > Obviously I'm missing something, but I can't figure that out. Here is > the kernel config file: If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such as the patch for linux 3.2, do you also have the issue? -- Gilles. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-09-26 21:30 ` Gilles Chanteperdrix @ 2012-09-27 5:49 ` Jari Lietzen 2012-09-27 7:46 ` Gilles Chanteperdrix 0 siblings, 1 reply; 16+ messages in thread From: Jari Lietzen @ 2012-09-27 5:49 UTC (permalink / raw) To: xenomai 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: > On 09/24/2012 09:09 PM, Jari Lietzen wrote: > >> Hi! >> >> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >> >> If I try to use Xenomai 2.6.1 the error message displayed is the same >> and system just hangs after that. No other messages, keyboard doesn't >> work, nothing. I started with the same kernel configuration, but I have >> disabled a few options more (e.g. syscall auditing, shared interrupt >> support). >> >> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >> Obviously I'm missing something, but I can't figure that out. Here is >> the kernel config file: > > > If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such > as the patch for linux 3.2, do you also have the issue? > Hi! Yes, I have patched the kernel with this: /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch --linux=/usr/src/linux xenomai being a link to xenomai-2.6.1 -directory. When I switch between Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract it from the source again and change the xenomai link accordingly. With Xenomai 2.5.6 the patching was done with this: /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch --linux=/usr/src/linux -Jari ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-09-27 5:49 ` Jari Lietzen @ 2012-09-27 7:46 ` Gilles Chanteperdrix 2012-09-27 15:47 ` Jari Lietzen 0 siblings, 1 reply; 16+ messages in thread From: Gilles Chanteperdrix @ 2012-09-27 7:46 UTC (permalink / raw) To: Jari Lietzen; +Cc: xenomai On 09/27/2012 07:49 AM, Jari Lietzen wrote: > 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >> >>> Hi! >>> >>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>> >>> If I try to use Xenomai 2.6.1 the error message displayed is the same >>> and system just hangs after that. No other messages, keyboard doesn't >>> work, nothing. I started with the same kernel configuration, but I have >>> disabled a few options more (e.g. syscall auditing, shared interrupt >>> support). >>> >>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >>> Obviously I'm missing something, but I can't figure that out. Here is >>> the kernel config file: >> >> >> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such >> as the patch for linux 3.2, do you also have the issue? >> > > Hi! > > Yes, I have patched the kernel with this: > /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 > --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch > --linux=/usr/src/linux > > xenomai being a link to xenomai-2.6.1 -directory. When I switch between > Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract > it from the source again and change the xenomai link accordingly. With > Xenomai 2.5.6 the patching was done with this: > /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 > --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch > --linux=/usr/src/linux So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the 2.9-00 patch, or with the patch for linux 3.2 ? -- Gilles. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-09-27 7:46 ` Gilles Chanteperdrix @ 2012-09-27 15:47 ` Jari Lietzen 2012-09-27 18:10 ` Gilles Chanteperdrix 2012-09-27 18:20 ` Gilles Chanteperdrix 0 siblings, 2 replies; 16+ messages in thread From: Jari Lietzen @ 2012-09-27 15:47 UTC (permalink / raw) To: xenomai 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti: > On 09/27/2012 07:49 AM, Jari Lietzen wrote: > >> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >>> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >>> >>>> Hi! >>>> >>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>>> >>>> If I try to use Xenomai 2.6.1 the error message displayed is the same >>>> and system just hangs after that. No other messages, keyboard doesn't >>>> work, nothing. I started with the same kernel configuration, but I have >>>> disabled a few options more (e.g. syscall auditing, shared interrupt >>>> support). >>>> >>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >>>> Obviously I'm missing something, but I can't figure that out. Here is >>>> the kernel config file: >>> >>> >>> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such >>> as the patch for linux 3.2, do you also have the issue? >>> >> >> Hi! >> >> Yes, I have patched the kernel with this: >> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >> --linux=/usr/src/linux >> >> xenomai being a link to xenomai-2.6.1 -directory. When I switch between >> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract >> it from the source again and change the xenomai link accordingly. With >> Xenomai 2.5.6 the patching was done with this: >> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch >> --linux=/usr/src/linux > > > So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the > 2.9-00 patch, or with the patch for linux 3.2 ? > I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled Xenomai 2.6.1 with the following commands: mkdir /usr/src/xbuild cd /usr/src/xbuild /usr/src/xenomai/configure --enable-x86-sep --enable-smp --enable-x86-tsc make install xenomai is a soft link pointing to /usr/src/xenomai-2.6.1. This is a snippet from dmesg: [ 0.443563] Xenomai: hal/x86_64 started. [ 0.443583] Xenomai: scheduling class idle registered. [ 0.443585] Xenomai: scheduling class rt registered. [ 0.444338] Xenomai: real-time nucleus v2.5.6 (Wormhole Wizards) loaded. [ 0.444478] Xenomai: SMI-enabled chipset found, but SMI workaround disabled [ 0.444480] (check CONFIG_XENO_HW_SMI_WORKAROUND). You may encounter [ 0.444481] high interrupt latencies! [ 0.444501] Xenomai: starting native API services. [ 0.444503] Xenomai: starting POSIX services. [ 0.444542] Xenomai: starting RTDM services. Then running /usr/xenomai/bin/xeno-test says: Started child 1755: /bin/bash /usr/xenomai/bin/xeno-test-run-wrapper /usr/xenomai/bin/xeno-test ++ echo 0 ++ /usr/xenomai/bin/arith Xenomai: incompatible ABI revision level (user-space requires '4', kernel provides '3'). I could go on with Xenomai 2.5.6, and that's what I'm using right now. But I'd like to bring my environment up to date. The reason I'm using kernel 2.6.37.6 is that my applications are build on top of IgH EtherCAT Master http://www.etherlab.org/en/ethercat/index.php and the kernel version just comes from there. -Jari ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-09-27 15:47 ` Jari Lietzen @ 2012-09-27 18:10 ` Gilles Chanteperdrix 2012-09-27 18:23 ` Gilles Chanteperdrix 2012-09-27 18:20 ` Gilles Chanteperdrix 1 sibling, 1 reply; 16+ messages in thread From: Gilles Chanteperdrix @ 2012-09-27 18:10 UTC (permalink / raw) To: Jari Lietzen; +Cc: xenomai On 09/27/2012 05:47 PM, Jari Lietzen wrote: > This is a snippet from dmesg: > > [ 0.443563] Xenomai: hal/x86_64 started. > [ 0.443583] Xenomai: scheduling class idle registered. > [ 0.443585] Xenomai: scheduling class rt registered. > [ 0.444338] Xenomai: real-time nucleus v2.5.6 (Wormhole Wizards) loaded. > [ 0.444478] Xenomai: SMI-enabled chipset found, but SMI workaround > disabled > [ 0.444480] (check CONFIG_XENO_HW_SMI_WORKAROUND). You may > encounter > [ 0.444481] high interrupt latencies! > [ 0.444501] Xenomai: starting native API services. > [ 0.444503] Xenomai: starting POSIX services. > [ 0.444542] Xenomai: starting RTDM services. > > > Then running /usr/xenomai/bin/xeno-test says: > > Started child 1755: /bin/bash /usr/xenomai/bin/xeno-test-run-wrapper > /usr/xenomai/bin/xeno-test > ++ echo 0 > ++ /usr/xenomai/bin/arith > Xenomai: incompatible ABI revision level > (user-space requires '4', kernel provides '3'). So, the kernel is booting, this is a different issue: http://www.xenomai.org/documentation/xenomai-2.6/html/TROUBLESHOOTING/#_xenomai_incompatible_abi_revision_level > I could go on with Xenomai 2.5.6, and that's what I'm using right now. > But I'd like to bring my environment up to date. The reason I'm using > kernel 2.6.37.6 is that my applications are build on top of IgH EtherCAT > Master http://www.etherlab.org/en/ethercat/index.php and the kernel > version just comes from there. You have a bug when updating both Xenomai and I-pipe patch, the test you made simply proved us that the bug is introduced by the commits between the 2.9-00 patch and 2.9-02 in the I-pipe tree and not by the Xenomai update. So, in order to find the bug, the best solution is to run a git bisect using the I-pipe git: git://git.denx.de/ipipe.git branch ipipe-2.6.37-x86 Regards. -- Gilles. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-09-27 18:10 ` Gilles Chanteperdrix @ 2012-09-27 18:23 ` Gilles Chanteperdrix 0 siblings, 0 replies; 16+ messages in thread From: Gilles Chanteperdrix @ 2012-09-27 18:23 UTC (permalink / raw) To: Jari Lietzen; +Cc: xenomai On 09/27/2012 08:10 PM, Gilles Chanteperdrix wrote: > On 09/27/2012 05:47 PM, Jari Lietzen wrote: > >> This is a snippet from dmesg: >> >> [ 0.443563] Xenomai: hal/x86_64 started. >> [ 0.443583] Xenomai: scheduling class idle registered. >> [ 0.443585] Xenomai: scheduling class rt registered. >> [ 0.444338] Xenomai: real-time nucleus v2.5.6 (Wormhole Wizards) loaded. >> [ 0.444478] Xenomai: SMI-enabled chipset found, but SMI workaround >> disabled >> [ 0.444480] (check CONFIG_XENO_HW_SMI_WORKAROUND). You may >> encounter >> [ 0.444481] high interrupt latencies! >> [ 0.444501] Xenomai: starting native API services. >> [ 0.444503] Xenomai: starting POSIX services. >> [ 0.444542] Xenomai: starting RTDM services. >> >> >> Then running /usr/xenomai/bin/xeno-test says: >> >> Started child 1755: /bin/bash /usr/xenomai/bin/xeno-test-run-wrapper >> /usr/xenomai/bin/xeno-test >> ++ echo 0 >> ++ /usr/xenomai/bin/arith >> Xenomai: incompatible ABI revision level >> (user-space requires '4', kernel provides '3'). > > > So, the kernel is booting, this is a different issue: > http://www.xenomai.org/documentation/xenomai-2.6/html/TROUBLESHOOTING/#_xenomai_incompatible_abi_revision_level > >> I could go on with Xenomai 2.5.6, and that's what I'm using right now. >> But I'd like to bring my environment up to date. The reason I'm using >> kernel 2.6.37.6 is that my applications are build on top of IgH EtherCAT >> Master http://www.etherlab.org/en/ethercat/index.php and the kernel >> version just comes from there. > > > You have a bug when updating both Xenomai and I-pipe patch, the test > you made simply proved us that the bug is introduced by the commits > between the 2.9-00 patch and 2.9-02 in the I-pipe tree and not by the > Xenomai update. So, in order to find the bug, the best solution is to > run a git bisect using the I-pipe git: > > git://git.denx.de/ipipe.git > branch ipipe-2.6.37-x86 Forget about this answer I had not read your answer correctly. -- Gilles. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-09-27 15:47 ` Jari Lietzen 2012-09-27 18:10 ` Gilles Chanteperdrix @ 2012-09-27 18:20 ` Gilles Chanteperdrix 2012-10-03 7:26 ` Jari Lietzen 1 sibling, 1 reply; 16+ messages in thread From: Gilles Chanteperdrix @ 2012-09-27 18:20 UTC (permalink / raw) To: Jari Lietzen; +Cc: xenomai On 09/27/2012 05:47 PM, Jari Lietzen wrote: > 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti: >> On 09/27/2012 07:49 AM, Jari Lietzen wrote: >> >>> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >>>> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >>>> >>>>> Hi! >>>>> >>>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >>>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>>>> >>>>> If I try to use Xenomai 2.6.1 the error message displayed is the same >>>>> and system just hangs after that. No other messages, keyboard doesn't >>>>> work, nothing. I started with the same kernel configuration, but I have >>>>> disabled a few options more (e.g. syscall auditing, shared interrupt >>>>> support). >>>>> >>>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >>>>> Obviously I'm missing something, but I can't figure that out. Here is >>>>> the kernel config file: >>>> >>>> >>>> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such >>>> as the patch for linux 3.2, do you also have the issue? >>>> >>> >>> Hi! >>> >>> Yes, I have patched the kernel with this: >>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>> --linux=/usr/src/linux >>> >>> xenomai being a link to xenomai-2.6.1 -directory. When I switch between >>> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract >>> it from the source again and change the xenomai link accordingly. With >>> Xenomai 2.5.6 the patching was done with this: >>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch >>> --linux=/usr/src/linux >> >> >> So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the >> 2.9-00 patch, or with the patch for linux 3.2 ? >> > > I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled Xenomai > 2.6.1 with the following commands: I mean Xenomai 2.6.1 kernel with the 2.9-00 patch or Xenomai 2.5.6 kernel with 2.9-00 patch. Since the kernel is not booting, we do not care about the user-space at this point. -- Gilles. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-09-27 18:20 ` Gilles Chanteperdrix @ 2012-10-03 7:26 ` Jari Lietzen 2012-10-03 8:18 ` Gilles Chanteperdrix 2012-10-03 21:37 ` Gilles Chanteperdrix 0 siblings, 2 replies; 16+ messages in thread From: Jari Lietzen @ 2012-10-03 7:26 UTC (permalink / raw) To: xenomai 27.09.2012 21:20, Gilles Chanteperdrix kirjoitti: > On 09/27/2012 05:47 PM, Jari Lietzen wrote: > >> 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti: >>> On 09/27/2012 07:49 AM, Jari Lietzen wrote: >>> >>>> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >>>>> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >>>>> >>>>>> Hi! >>>>>> >>>>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >>>>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>>>>> >>>>>> If I try to use Xenomai 2.6.1 the error message displayed is the same >>>>>> and system just hangs after that. No other messages, keyboard doesn't >>>>>> work, nothing. I started with the same kernel configuration, but I have >>>>>> disabled a few options more (e.g. syscall auditing, shared interrupt >>>>>> support). >>>>>> >>>>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >>>>>> Obviously I'm missing something, but I can't figure that out. Here is >>>>>> the kernel config file: >>>>> >>>>> >>>>> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such >>>>> as the patch for linux 3.2, do you also have the issue? >>>>> >>>> >>>> Hi! >>>> >>>> Yes, I have patched the kernel with this: >>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>>> --linux=/usr/src/linux >>>> >>>> xenomai being a link to xenomai-2.6.1 -directory. When I switch between >>>> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract >>>> it from the source again and change the xenomai link accordingly. With >>>> Xenomai 2.5.6 the patching was done with this: >>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch >>>> --linux=/usr/src/linux >>> >>> >>> So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the >>> 2.9-00 patch, or with the patch for linux 3.2 ? >>> >> >> I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled Xenomai >> 2.6.1 with the following commands: > > > I mean Xenomai 2.6.1 kernel with the 2.9-00 patch or Xenomai 2.5.6 > kernel with 2.9-00 patch. Since the kernel is not booting, we do not > care about the user-space at this point. > I tested again the following combinations. Always starting with a fresh kernel tree and patching it: 2.9-00 patch 2.9-02 patch ---------------------------------------------- Xenomai 2.5.6 OK OK Xenomai 2.6.1 boot fails boot fails Here is a boot log from 2.9-02 patch used with Xenomai 2.6.1 and the corresponding kernel .config. I used the same config file for all four tests and prepared and compiled the kernel with: /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch --linux=/usr/src/linux copy saved configuration to /usr/src/linux/.config make xconfig (no changes, but save .config anyway) make -j 2 make modules_install make install I also tested this with Atom D2500 based board, and Xenomai 2.6.1 with 2.9-02 patch fails the same way with that too. Changed the processor type of course. Boot log: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37.6-ipipex (root@ec-devel.acme.local) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP PREEMPT Wed Oct 3 09:23:30 EEST 2012 [ 0.000000] Command line: ro root=UUID=6bf7f9fc-9b5c-46f2-b327-447e7c56b3fa LANG=fi_FI.UTF-8 rd_NO_LUKS rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=fi rd_NO_LVM rd_NO_DM rhgb crashkernel=auto console=tty0 console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f790000 (usable) [ 0.000000] BIOS-e820: 000000007f790000 - 000000007f79e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f79e000 - 000000007f7e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f7e0000 - 000000007f800000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x7f790 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] total RAM covered: 2040M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 2 lose cover RAM: 0G [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] init_memory_mapping: 0000000000000000-000000007f790000 [ 0.000000] RAMDISK: 37b9b000 - 37ff0000 [ 0.000000] crashkernel: memory value expected [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f790 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: INTEL [ 0.000000] MPTABLE: Product ID: [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:80380000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007f400000 s89344 r8192 d21248 u1048576 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514874 [ 0.000000] Kernel command line: ro root=UUID=6bf7f9fc-9b5c-46f2-b327-447e7c56b3fa LANG=fi_FI.UTF-8 rd_NO_LUKS rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=fi rd_NO_LVM rd_NO_DM rhgb crashkernel=auto console=tty0 console=ttyS0,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 2045560k/2088512k available (3109k kernel code, 452k absent, 42500k reserved, 1524k data, 448k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:384 [ 0.000000] I-pipe 2.9-00: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2585.252 MHz processor. [ 0.003006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5170.50 BogoMIPS (lpj=2585252) [ 0.005002] pid_max: default: 32768 minimum: 301 [ 0.006024] Security Framework initialized [ 0.007010] SELinux: Initializing. [ 0.008031] Mount-cache hash table entries: 256 [ 0.009164] Initializing cgroup subsys ns [ 0.010005] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.011003] Initializing cgroup subsys cpuacct [ 0.012006] Initializing cgroup subsys memory [ 0.013011] Initializing cgroup subsys devices [ 0.014003] Initializing cgroup subsys freezer [ 0.015025] CPU: Physical Processor ID: 0 [ 0.016002] CPU: Processor Core ID: 0 [ 0.017003] mce: CPU supports 6 MCE banks [ 0.018007] CPU0: Thermal monitoring enabled (TM2) [ 0.019004] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.023002] PEBS disabled due to CPU errata. [ 0.024004] ... version: 2 [ 0.025002] ... bit width: 40 [ 0.026002] ... generic registers: 2 [ 0.027002] ... value mask: 000000ffffffffff [ 0.028002] ... max period: 000000007fffffff [ 0.029002] ... fixed-purpose events: 3 [ 0.030002] ... event mask: 0000000700000003 [ 0.031113] Freeing SMP alternatives: 16k freed [ 0.032063] Setting APIC routing to flat [ 0.033054] ExtINT not setup in hardware but reported by MP table [ 0.034235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.034999] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.034999] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.034999] ..... (found apic 0 pin 0) ... [ 0.046939] ....... works. [ 0.047002] CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d [ 0.157033] Booting Node 0, Processors #1 Ok. [ 0.231018] Brought up 2 CPUs [ 0.232003] Total of 2 processors activated (10340.01 BogoMIPS). [ 0.233362] devtmpfs: initialized [ 0.237229] NET: Registered protocol family 16 [ 0.238141] PCI: Using configuration type 1 for base access [ 0.240246] bio: create slab <bio-0> at 0 [ 0.244438] vgaarb: loaded [ 0.245084] SCSI subsystem initialized [ 0.246016] usbcore: registered new interface driver usbfs [ 0.252017] usbcore: registered new interface driver hub [ 0.257616] usbcore: registered new device driver usb [ 0.258022] PCI: Probing PCI hardware [ 0.263432] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) [ 0.271330] pci 0000:00:1c.0: PCI bridge to [bus 03-03] [ 0.277011] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.287015] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.292076] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.299068] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.308246] PCI: Discovered primary peer bus ff [IRQ] [ 0.313014] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:27b8] [ 0.319153] NetLabel: Initializing [ 0.322003] NetLabel: domain hash size = 128 [ 0.327002] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.332013] NetLabel: unlabeled traffic allowed by default [ 0.338039] Switching to clocksource tsc [ 0.343173] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff] [ 0.350122] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.358075] pci 0000:00:1c.0: PCI bridge to [bus 03-03] [ 0.363369] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.369533] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff] [ 0.376388] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.384250] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.389548] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.395716] pci 0000:00:1c.1: bridge window [mem 0xcff00000-0xcfffffff] [ 0.402570] pci 0000:00:1c.1: bridge window [mem pref disabled] [ 0.409166] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 0.414458] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.420622] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.426351] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.432522] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.439126] pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 0.445780] NET: Registered protocol family 2 [ 0.450227] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.457602] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.467313] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.474701] TCP: Hash tables configured (established 262144 bind 65536) [ 0.481383] TCP reno registered [ 0.484595] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.490686] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.497317] NET: Registered protocol family 1 [ 0.524137] Trying to unpack rootfs image as initramfs... [ 0.611572] Freeing initrd memory: 4436k freed [ 0.617868] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.626039] audit: initializing netlink socket (disabled) [ 0.631524] type=2000 audit(1349247704.629:1): initialized [ 0.643323] I-pipe: Domain Xenomai registered. [ 0.647866] Xenomai: hal/x86_64 started. And .config: # # Automatically generated make config: don't edit # Linux/x86_64 2.6.37.6 Kernel Configuration # Wed Oct 3 08:42:29 2012 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y CONFIG_HAVE_IRQ_WORK=y CONFIG_IRQ_WORK=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="-ipipex" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_WATCH=y CONFIG_AUDIT_TREE=y CONFIG_HAVE_GENERIC_HARDIRQS=y # # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set CONFIG_HAVE_SPARSE_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_AUTO_IRQ_AFFINITY is not set # CONFIG_IRQ_PER_CPU is not set # CONFIG_HARDIRQS_SW_RESEND is not set # CONFIG_SPARSE_IRQ is not set # # RCU Subsystem # CONFIG_TREE_PREEMPT_RCU=y CONFIG_PREEMPT_RCU=y # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y # CONFIG_BLK_CGROUP is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_MM_OWNER=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y CONFIG_PROFILING=y CONFIG_OPROFILE=m CONFIG_OPROFILE_EVENT_MULTIPLEX=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y # CONFIG_JUMP_LABEL is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_ARCH_JUMP_LABEL=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_INTEGRITY=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set # CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set # CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set CONFIG_MUTEX_SPIN_ON_OWNER=y # # Real-time sub-system # CONFIG_XENOMAI=y CONFIG_XENO_GENERIC_STACKPOOL=y CONFIG_XENO_FASTSYNCH=y CONFIG_XENO_OPT_NUCLEUS=y CONFIG_XENO_OPT_PERVASIVE=y CONFIG_XENO_OPT_PRIOCPL=y CONFIG_XENO_OPT_PIPELINE_HEAD=y # CONFIG_XENO_OPT_SCHED_CLASSES is not set CONFIG_XENO_OPT_PIPE=y CONFIG_XENO_OPT_PIPE_NRDEV=32 CONFIG_XENO_OPT_REGISTRY_NRSLOTS=512 CONFIG_XENO_OPT_SYS_HEAPSZ=256 CONFIG_XENO_OPT_SYS_STACKPOOLSZ=128 CONFIG_XENO_OPT_SEM_HEAPSZ=12 CONFIG_XENO_OPT_GLOBAL_SEM_HEAPSZ=12 CONFIG_XENO_OPT_STATS=y # CONFIG_XENO_OPT_DEBUG is not set # CONFIG_XENO_OPT_SHIRQ is not set # # Timing # # CONFIG_XENO_OPT_TIMING_PERIODIC is not set CONFIG_XENO_OPT_TIMING_VIRTICK=1000 CONFIG_XENO_OPT_TIMING_SCHEDLAT=0 # # Scalability # # CONFIG_XENO_OPT_SCALABLE_SCHED is not set CONFIG_XENO_OPT_TIMER_LIST=y # CONFIG_XENO_OPT_TIMER_HEAP is not set # CONFIG_XENO_OPT_TIMER_WHEEL is not set # # Machine # CONFIG_XENO_HW_FPU=y # # NMI watchdog # # CONFIG_XENO_HW_NMI_DEBUG_LATENCY is not set # # SMI workaround # # CONFIG_XENO_HW_SMI_DETECT_DISABLE is not set CONFIG_XENO_HW_SMI_DETECT=y # CONFIG_XENO_HW_SMI_WORKAROUND is not set # # Interfaces # CONFIG_XENO_SKIN_NATIVE=y CONFIG_XENO_OPT_NATIVE_PERIOD=0 CONFIG_XENO_OPT_NATIVE_PIPE=y CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=1024 CONFIG_XENO_OPT_NATIVE_SEM=y CONFIG_XENO_OPT_NATIVE_EVENT=y CONFIG_XENO_OPT_NATIVE_MUTEX=y CONFIG_XENO_OPT_NATIVE_COND=y CONFIG_XENO_OPT_NATIVE_QUEUE=y CONFIG_XENO_OPT_NATIVE_BUFFER=y CONFIG_XENO_OPT_NATIVE_HEAP=y CONFIG_XENO_OPT_NATIVE_ALARM=y CONFIG_XENO_OPT_NATIVE_MPS=y # CONFIG_XENO_OPT_NATIVE_INTR is not set CONFIG_XENO_SKIN_POSIX=y CONFIG_XENO_OPT_POSIX_PERIOD=0 # CONFIG_XENO_OPT_POSIX_SHM is not set # CONFIG_XENO_OPT_POSIX_INTR is not set # CONFIG_XENO_OPT_POSIX_SELECT is not set # CONFIG_XENO_OPT_DEBUG_POSIX is not set # CONFIG_XENO_SKIN_PSOS is not set # CONFIG_XENO_SKIN_UITRON is not set # CONFIG_XENO_SKIN_VRTX is not set # CONFIG_XENO_SKIN_VXWORKS is not set # CONFIG_XENO_SKIN_RTAI is not set # CONFIG_XENO_OPT_NOWARN_DEPRECATED is not set CONFIG_XENO_SKIN_RTDM=y CONFIG_XENO_OPT_RTDM_PERIOD=0 CONFIG_XENO_OPT_RTDM_FILDES=128 # CONFIG_XENO_OPT_RTDM_SELECT is not set # # Drivers # # # Serial drivers # # CONFIG_XENO_DRIVERS_16550A is not set # # Testing drivers # # CONFIG_XENO_DRIVERS_TESTING_LEGACY_NAMES is not set CONFIG_XENO_DRIVERS_TIMERBENCH=y # CONFIG_XENO_DRIVERS_KLATENCY is not set # CONFIG_XENO_DRIVERS_IRQBENCH is not set CONFIG_XENO_DRIVERS_SWITCHTEST=y # CONFIG_XENO_DRIVERS_SIGTEST is not set # CONFIG_XENO_DRIVERS_RTDMTEST is not set # # CAN drivers # # CONFIG_XENO_DRIVERS_CAN is not set # # ANALOGY drivers # # CONFIG_XENO_DRIVERS_ANALOGY is not set # # Real-time IPC drivers # # CONFIG_XENO_DRIVERS_RTIPC is not set CONFIG_FREEZER=y # # Processor type and features # # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_MPPARSE=y # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_NO_BOOTMEM=y # CONFIG_MEMTEST is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set CONFIG_MCORE2=y # CONFIG_MATOM is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=4 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y CONFIG_IRQ_TIME_ACCOUNTING=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_IPIPE=y CONFIG_IPIPE_DOMAINS=4 CONFIG_IPIPE_DELAYED_ATOMICSW=y # CONFIG_IPIPE_UNMASKED_CONTEXT_SWITCH is not set CONFIG_HAVE_IPIPE_HOSTRT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_X86_MCE_AMD is not set CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y # CONFIG_I8K is not set CONFIG_MICROCODE=m CONFIG_MICROCODE_INTEL=y # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y # CONFIG_NUMA is not set CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_COMPACTION is not set CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000 # CONFIG_HOTPLUG_CPU is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # # CONFIG_PM is not set # CONFIG_SFI is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # CONFIG_CPU_IDLE is not set # # Memory power savings # # CONFIG_I7300_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_CNB20LE_QUIRK is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_PCIE_ECRC=y CONFIG_PCIEAER_INJECT=m CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_STUB=y CONFIG_HT_IRQ=y CONFIG_PCI_IOV=y CONFIG_ISA_DMA_API=y CONFIG_AMD_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IA32_EMULATION is not set # CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set CONFIG_HAVE_TEXT_POKE_SMP=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y CONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y CONFIG_XFRM_STATISTICS=y CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m # CONFIG_NET_IPGRE_DEMUX is not set CONFIG_IP_MROUTE=y # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set CONFIG_NETLABEL=y CONFIG_NETWORK_SECMARK=y # CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=m # CONFIG_NET_SCTPPROBE is not set # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_HMAC_NONE=y # CONFIG_SCTP_HMAC_SHA1 is not set # CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y CONFIG_RPS=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m CONFIG_PARIDE=m # # Parallel IDE high-level drivers # # CONFIG_PARIDE_PD is not set # CONFIG_PARIDE_PCD is not set # CONFIG_PARIDE_PF is not set # CONFIG_PARIDE_PT is not set # CONFIG_PARIDE_PG is not set # # Parallel IDE protocol modules # # CONFIG_PARIDE_ATEN is not set # CONFIG_PARIDE_BPCK is not set # CONFIG_PARIDE_COMM is not set # CONFIG_PARIDE_DSTR is not set # CONFIG_PARIDE_FIT2 is not set # CONFIG_PARIDE_FIT3 is not set # CONFIG_PARIDE_EPAT is not set # CONFIG_PARIDE_EPIA is not set # CONFIG_PARIDE_FRIQ is not set # CONFIG_PARIDE_FRPW is not set # CONFIG_PARIDE_KBIC is not set # CONFIG_PARIDE_KTTI is not set # CONFIG_PARIDE_ON20 is not set # CONFIG_PARIDE_ON26 is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_DRBD is not set CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_OSD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_RBD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set CONFIG_SCSI_OSD_INITIATOR=m CONFIG_SCSI_OSD_ULD=m CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y # CONFIG_SATA_AHCI_PLATFORM is not set CONFIG_SATA_INIC162X=m CONFIG_SATA_SIL24=m CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # CONFIG_PDC_ADMA=m CONFIG_SATA_QSTOR=m CONFIG_SATA_SX4=m CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y CONFIG_SATA_MV=m CONFIG_SATA_NV=m CONFIG_SATA_PROMISE=m CONFIG_SATA_SIL=m CONFIG_SATA_SIS=m CONFIG_SATA_SVW=m CONFIG_SATA_ULI=m CONFIG_SATA_VIA=m CONFIG_SATA_VITESSE=m # # PATA SFF controllers with BMDMA # CONFIG_PATA_ALI=m CONFIG_PATA_AMD=m CONFIG_PATA_ARTOP=m CONFIG_PATA_ATIIXP=m CONFIG_PATA_ATP867X=m CONFIG_PATA_CMD64X=m CONFIG_PATA_CS5520=m CONFIG_PATA_CS5530=m CONFIG_PATA_CS5536=m CONFIG_PATA_CYPRESS=m CONFIG_PATA_EFAR=m CONFIG_PATA_HPT366=m CONFIG_PATA_HPT37X=m CONFIG_PATA_HPT3X2N=m CONFIG_PATA_HPT3X3=m # CONFIG_PATA_HPT3X3_DMA is not set CONFIG_PATA_IT8213=m CONFIG_PATA_IT821X=m CONFIG_PATA_JMICRON=m CONFIG_PATA_MARVELL=m CONFIG_PATA_NETCELL=m CONFIG_PATA_NINJA32=m CONFIG_PATA_NS87415=m CONFIG_PATA_OLDPIIX=m CONFIG_PATA_OPTIDMA=m CONFIG_PATA_PDC2027X=m CONFIG_PATA_PDC_OLD=m # CONFIG_PATA_RADISYS is not set CONFIG_PATA_RDC=m # CONFIG_PATA_SC1200 is not set CONFIG_PATA_SCH=m CONFIG_PATA_SERVERWORKS=m CONFIG_PATA_SIL680=m CONFIG_PATA_SIS=m # CONFIG_PATA_TOSHIBA is not set CONFIG_PATA_TRIFLEX=m CONFIG_PATA_VIA=m CONFIG_PATA_WINBOND=m # # PIO-only SFF controllers # CONFIG_PATA_CMD640_PCI=m CONFIG_PATA_MPIIX=m CONFIG_PATA_NS87410=m CONFIG_PATA_OPTI=m # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # CONFIG_ATA_GENERIC=m # CONFIG_PATA_LEGACY is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m CONFIG_MACVLAN=m # CONFIG_MACVTAP is not set CONFIG_EQUALIZER=m CONFIG_TUN=m CONFIG_VETH=m # CONFIG_ARCNET is not set CONFIG_MII=m CONFIG_PHYLIB=m # # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set CONFIG_BROADCOM_PHY=m CONFIG_BCM63XX_PHY=m # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MICREL_PHY is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=m # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m CONFIG_BNX2=m # CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_STMMAC_ETH is not set # CONFIG_PCH_GBE is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # # CAIF transport drivers # # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PLIP=m # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_INTEL is not set # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_VIA is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 CONFIG_HANGCHECK_TIMER=m CONFIG_TCG_TPM=y # CONFIG_TCG_TIS is not set CONFIG_TCG_NSC=m CONFIG_TCG_ATMEL=m # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_RAMOOPS is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m # CONFIG_I2C_MUX is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI1563=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD756_S4882=m CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m CONFIG_I2C_ISCH=m CONFIG_I2C_PIIX4=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_NFORCE2_S4985=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_GPIO is not set # CONFIG_I2C_INTEL_MID is not set # CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=m CONFIG_I2C_SIMTEC=m # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m # CONFIG_I2C_TAOS_EVM is not set CONFIG_I2C_TINY_USB=m # # Other I2C/SMBus bus drivers # CONFIG_I2C_STUB=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_SPI is not set # # PPS support # CONFIG_PPS=m # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set # CONFIG_PPS_CLIENT_LDISC is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # # CONFIG_GPIO_BASIC_MMIO is not set # CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_SCH is not set # CONFIG_GPIO_VX855 is not set # # I2C GPIO expanders: # # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: # # CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set CONFIG_GPIO_LANGWELL=y # CONFIG_GPIO_PCH is not set # CONFIG_GPIO_RDC321X is not set # # SPI GPIO expanders: # # # AC97 GPIO expanders: # # # MODULbus GPIO expanders: # CONFIG_W1=m CONFIG_W1_CON=y # # 1-wire Bus Masters # # CONFIG_W1_MASTER_MATROX is not set CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m # CONFIG_W1_MASTER_GPIO is not set # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=m CONFIG_W1_SLAVE_SMEM=m CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m CONFIG_W1_SLAVE_DS2433_CRC=y CONFIG_W1_SLAVE_DS2760=m CONFIG_W1_SLAVE_BQ27000=m CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ20Z75 is not set CONFIG_BATTERY_BQ27x00=m # CONFIG_BATTERY_MAX17040 is not set # CONFIG_CHARGER_ISP1704 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m # CONFIG_SENSORS_ADT7411 is not set CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m # CONFIG_SENSORS_ASC7621 is not set CONFIG_SENSORS_K8TEMP=m # CONFIG_SENSORS_K10TEMP is not set CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_I5K_AMB=m CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_F71882FG=m CONFIG_SENSORS_F75375S=m CONFIG_SENSORS_FSCHMD=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m # CONFIG_SENSORS_GPIO_FAN is not set CONFIG_SENSORS_CORETEMP=m # CONFIG_SENSORS_PKGTEMP is not set CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m CONFIG_SENSORS_IT87=m # CONFIG_SENSORS_JC42 is not set CONFIG_SENSORS_LM63=m # CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m CONFIG_SENSORS_LTC4215=m CONFIG_SENSORS_LTC4245=m # CONFIG_SENSORS_LTC4261 is not set CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SIS5595=m # CONFIG_SENSORS_SMM665 is not set CONFIG_SENSORS_DME1737=m # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_ADS7828=m # CONFIG_SENSORS_AMC6821 is not set CONFIG_SENSORS_THMC50=m # CONFIG_SENSORS_TMP102 is not set CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m # CONFIG_SENSORS_VIA_CPUTEMP is not set CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83793=m # CONFIG_SENSORS_W83795 is not set CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m # CONFIG_SENSORS_LIS3_I2C is not set CONFIG_SENSORS_APPLESMC=m CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m # CONFIG_F71808E_WDT is not set # CONFIG_SC520_WDT is not set CONFIG_SBC_FITPC2_WATCHDOG=m # CONFIG_EUROTECH_WDT is not set CONFIG_IB700_WDT=m CONFIG_IBMASR=m # CONFIG_WAFER_WDT is not set CONFIG_I6300ESB_WDT=m CONFIG_ITCO_WDT=m CONFIG_ITCO_VENDOR_SUPPORT=y CONFIG_IT8712F_WDT=m CONFIG_IT87_WDT=m CONFIG_HP_WATCHDOG=m # CONFIG_HPWDT_NMI_DECODING is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_CPU5_WDT is not set CONFIG_SMSC_SCH311X_WDT=m # CONFIG_SMSC37B787_WDT is not set CONFIG_W83627HF_WDT=m CONFIG_W83697HF_WDT=m CONFIG_W83697UG_WDT=m CONFIG_W83877F_WDT=m CONFIG_W83977F_WDT=m CONFIG_MACHZ_WDT=m # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m # # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # CONFIG_SSB=m CONFIG_SSB_PCIHOST_POSSIBLE=y # CONFIG_SSB_PCIHOST is not set # CONFIG_SSB_DEBUG is not set # CONFIG_MFD_SUPPORT is not set CONFIG_MFD_CORE=m CONFIG_LPC_SCH=m # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # CONFIG_AGP=y # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=m CONFIG_DRM_KMS_HELPER=m # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set CONFIG_DRM_I915=m CONFIG_DRM_I915_KMS=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_STUB_POULSBO is not set CONFIG_VGASTATE=m CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_TMIO is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m # CONFIG_BACKLIGHT_GENERIC is not set # CONFIG_BACKLIGHT_PROGEAR is not set # CONFIG_BACKLIGHT_MBP_NVIDIA is not set # CONFIG_BACKLIGHT_SAHARA is not set # CONFIG_BACKLIGHT_ADP8860 is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # # Special HID drivers # # CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y # CONFIG_HID_ACRUX_FF is not set CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y # CONFIG_HID_CANDO is not set CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set # CONFIG_HID_EGALAX is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_TWINHAN is not set CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWII_FF is not set CONFIG_HID_MICROSOFT=y # CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_QUANTA is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_ROCCAT_KONE is not set # CONFIG_HID_ROCCAT_PYRA is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_STANTUM is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_MON=y CONFIG_USB_WUSB=m CONFIG_USB_WUSB_CBAF=m # CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=m # CONFIG_USB_XHCI_HCD_DEBUGGING is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_ISP1362_HCD=m CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=m # CONFIG_USB_R8A66597_HCD is not set CONFIG_USB_WHCI_HCD=m CONFIG_USB_HWA_HCD=m # # USB Device Class drivers # CONFIG_USB_ACM=m # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=m CONFIG_USB_STORAGE_FREECOM=m CONFIG_USB_STORAGE_ISD200=m CONFIG_USB_STORAGE_USBAT=m CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=m CONFIG_USB_STORAGE_JUMPSHOT=m CONFIG_USB_STORAGE_ALAUDA=m CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m CONFIG_USB_STORAGE_CYPRESS_ATACB=m # CONFIG_USB_UAS is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set CONFIG_NOP_USB_XCEIV=m CONFIG_UWB=y CONFIG_UWB_HWA=m CONFIG_UWB_WHCI=m # CONFIG_UWB_I1480U is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # # CONFIG_LEDS_ALIX2 is not set # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_LP5523 is not set # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_INTEL_SS4200 is not set # CONFIG_LEDS_LT3593 is not set # CONFIG_LEDS_TRIGGERS is not set # # LED Triggers # # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_DS1374=m CONFIG_RTC_DRV_DS1672=m # CONFIG_RTC_DRV_DS3232 is not set CONFIG_RTC_DRV_MAX6900=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=m # CONFIG_RTC_DRV_ISL12022 is not set CONFIG_RTC_DRV_X1205=m CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set CONFIG_RTC_DRV_FM3130=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_RX8025=m # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_DS1286=m CONFIG_RTC_DRV_DS1511=m CONFIG_RTC_DRV_DS1553=m CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_STK17TA8=m # CONFIG_RTC_DRV_M48T86 is not set CONFIG_RTC_DRV_M48T35=m CONFIG_RTC_DRV_M48T59=m # CONFIG_RTC_DRV_MSM6242 is not set CONFIG_RTC_DRV_BQ4802=m # CONFIG_RTC_DRV_RP5C01 is not set CONFIG_RTC_DRV_V3020=m # # on-CPU RTC drivers # CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # # CONFIG_INTEL_MID_DMAC is not set CONFIG_INTEL_IOATDMA=m # CONFIG_TIMB_DMA is not set # CONFIG_PCH_DMA is not set CONFIG_DMA_ENGINE=y # # DMA Clients # CONFIG_NET_DMA=y CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set CONFIG_DCA=m # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set # CONFIG_X86_PLATFORM_DEVICES is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # CONFIG_DMIID is not set # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4_FS is not set CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_EXPORTFS=m CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_FANOTIFY is not set CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m CONFIG_CUSE=m CONFIG_GENERIC_ACL=y # # Caches # CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set CONFIG_FSCACHE_OBJECT_LIST=y CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="ascii" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=m # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_V4_1=y CONFIG_PNFS_FILE_LAYOUT=m CONFIG_NFS_FSCACHE=y # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y # CONFIG_NFS_USE_NEW_IDMAPPER is not set CONFIG_NFSD=m CONFIG_NFSD_DEPRECATED=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_CEPH_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y # CONFIG_CIFS_STATS2 is not set CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set CONFIG_CIFS_DFS_UPCALL=y # CONFIG_CIFS_FSCACHE is not set # CONFIG_CIFS_ACL is not set CONFIG_CIFS_EXPERIMENTAL=y CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y CONFIG_NCPFS_SMALLDOS=y CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m # CONFIG_NLS_CODEPAGE_857 is not set CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set CONFIG_NLS_ISO8859_5=m # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set CONFIG_NLS_ISO8859_13=m # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y CONFIG_STRIP_ASM_SYMS=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y # CONFIG_IPIPE_DEBUG is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_HARDLOCKUP_DETECTOR is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_BKL is not set # CONFIG_SPARSE_RCU_POINTER is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LKDTM is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_RING_BUFFER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set CONFIG_BUILD_DOCSRC=y CONFIG_DYNAMIC_DEBUG=y # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_STRICT_DEVMEM=y # CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_OPTIMIZE_INLINING=y # # Security options # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y # CONFIG_SECURITY_PATH is not set CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set # CONFIG_SECURITY_TOMOYO is not set # CONFIG_SECURITY_APPARMOR is not set # CONFIG_IMA is not set CONFIG_DEFAULT_SECURITY_SELINUX=y # CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="selinux" CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_SEQIV=m # # Block modes # CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # # Hash modes # CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=m CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set # # Ciphers # CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_AES_NI_INTEL is not set CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m # CONFIG_CRYPTO_SALSA20_X86_64 is not set CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # # Compression # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m CONFIG_CRYPTO_DEV_HIFN_795X=m CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-10-03 7:26 ` Jari Lietzen @ 2012-10-03 8:18 ` Gilles Chanteperdrix 2012-10-03 14:38 ` Henri Roosen 2012-10-03 21:37 ` Gilles Chanteperdrix 1 sibling, 1 reply; 16+ messages in thread From: Gilles Chanteperdrix @ 2012-10-03 8:18 UTC (permalink / raw) To: Jari Lietzen; +Cc: xenomai On 10/03/2012 09:26 AM, Jari Lietzen wrote: > 27.09.2012 21:20, Gilles Chanteperdrix kirjoitti: >> On 09/27/2012 05:47 PM, Jari Lietzen wrote: >> >>> 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti: >>>> On 09/27/2012 07:49 AM, Jari Lietzen wrote: >>>> >>>>> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >>>>>> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >>>>>> >>>>>>> Hi! >>>>>>> >>>>>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >>>>>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>>>>>> >>>>>>> If I try to use Xenomai 2.6.1 the error message displayed is the same >>>>>>> and system just hangs after that. No other messages, keyboard doesn't >>>>>>> work, nothing. I started with the same kernel configuration, but I have >>>>>>> disabled a few options more (e.g. syscall auditing, shared interrupt >>>>>>> support). >>>>>>> >>>>>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >>>>>>> Obviously I'm missing something, but I can't figure that out. Here is >>>>>>> the kernel config file: >>>>>> >>>>>> >>>>>> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such >>>>>> as the patch for linux 3.2, do you also have the issue? >>>>>> >>>>> >>>>> Hi! >>>>> >>>>> Yes, I have patched the kernel with this: >>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>>>> --linux=/usr/src/linux >>>>> >>>>> xenomai being a link to xenomai-2.6.1 -directory. When I switch between >>>>> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract >>>>> it from the source again and change the xenomai link accordingly. With >>>>> Xenomai 2.5.6 the patching was done with this: >>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch >>>>> --linux=/usr/src/linux >>>> >>>> >>>> So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the >>>> 2.9-00 patch, or with the patch for linux 3.2 ? >>>> >>> >>> I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled Xenomai >>> 2.6.1 with the following commands: >> >> >> I mean Xenomai 2.6.1 kernel with the 2.9-00 patch or Xenomai 2.5.6 >> kernel with 2.9-00 patch. Since the kernel is not booting, we do not >> care about the user-space at this point. >> > > I tested again the following combinations. Always starting with a fresh > kernel tree and patching it: > > 2.9-00 patch 2.9-02 patch > ---------------------------------------------- > Xenomai 2.5.6 OK OK > > Xenomai 2.6.1 boot fails boot fails > > > Here is a boot log from 2.9-02 patch used with Xenomai 2.6.1 and the > corresponding kernel .config. I used the same config file for all four > tests and prepared and compiled the kernel with: > > /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 > --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch > --linux=/usr/src/linux Ok, this does not match what you originally said, you originally said the kernel was locking up after the "MP-BIOS bug: 8254 timer not connected to IO-APIC", something changed between the tests? What about my suggestion to try the patch for Linux 3.2 which ships with Xenomai 2.6.1? > > copy saved configuration to /usr/src/linux/.config > make xconfig (no changes, but save .config anyway) > make -j 2 > make modules_install > make install > > I also tested this with Atom D2500 based board, and Xenomai 2.6.1 with > 2.9-02 patch fails the same way with that too. Changed the processor > type of course. Ok, there are a few things in your configuration I would change: - enable ACPI, except for ACPI_PROCESSOR - disable AUDIT_SYSCALL, KPROBES, PERF_EVENTS, OPROFILE, HPET_TIMER But since the same configuration works with 2.5.6, it should work with 2.6.1. The things I would try to debug this issue: - add some printks along the xenomai initialization to see what function exactly is causing the issue (the usual suspect would be rthal_start_timer) - try and enable the APIC or I/OAPIC nmi watchdog, so that it can tell you where the lockup happens - try 2.6.0 (which likely does not work either) - if 2.6.0 does not work, try a "git bisect" between 2.5.6 and 2.6.0 - if 2.6.0 works, try a "git bisect" between 2.6.0 and 2.6.1 On my side, I will try and use your kernel configuration on my atom, to see if I reproduce the issue. Regards. -- Gilles. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-10-03 8:18 ` Gilles Chanteperdrix @ 2012-10-03 14:38 ` Henri Roosen 2012-10-03 15:08 ` Philippe Gerum 0 siblings, 1 reply; 16+ messages in thread From: Henri Roosen @ 2012-10-03 14:38 UTC (permalink / raw) To: Gilles Chanteperdrix; +Cc: Jari Lietzen, xenomai On Wed, Oct 3, 2012 at 10:18 AM, Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> wrote: > On 10/03/2012 09:26 AM, Jari Lietzen wrote: >> 27.09.2012 21:20, Gilles Chanteperdrix kirjoitti: >>> On 09/27/2012 05:47 PM, Jari Lietzen wrote: >>> >>>> 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti: >>>>> On 09/27/2012 07:49 AM, Jari Lietzen wrote: >>>>> >>>>>> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >>>>>>> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >>>>>>> >>>>>>>> Hi! >>>>>>>> >>>>>>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >>>>>>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>>>>>>> >>>>>>>> If I try to use Xenomai 2.6.1 the error message displayed is the same >>>>>>>> and system just hangs after that. No other messages, keyboard doesn't >>>>>>>> work, nothing. I started with the same kernel configuration, but I have >>>>>>>> disabled a few options more (e.g. syscall auditing, shared interrupt >>>>>>>> support). >>>>>>>> >>>>>>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >>>>>>>> Obviously I'm missing something, but I can't figure that out. Here is >>>>>>>> the kernel config file: >>>>>>> >>>>>>> >>>>>>> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such >>>>>>> as the patch for linux 3.2, do you also have the issue? >>>>>>> >>>>>> >>>>>> Hi! >>>>>> >>>>>> Yes, I have patched the kernel with this: >>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>>>>> --linux=/usr/src/linux >>>>>> >>>>>> xenomai being a link to xenomai-2.6.1 -directory. When I switch between >>>>>> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract >>>>>> it from the source again and change the xenomai link accordingly. With >>>>>> Xenomai 2.5.6 the patching was done with this: >>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch >>>>>> --linux=/usr/src/linux >>>>> >>>>> >>>>> So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the >>>>> 2.9-00 patch, or with the patch for linux 3.2 ? >>>>> >>>> >>>> I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled Xenomai >>>> 2.6.1 with the following commands: >>> >>> >>> I mean Xenomai 2.6.1 kernel with the 2.9-00 patch or Xenomai 2.5.6 >>> kernel with 2.9-00 patch. Since the kernel is not booting, we do not >>> care about the user-space at this point. >>> >> >> I tested again the following combinations. Always starting with a fresh >> kernel tree and patching it: >> >> 2.9-00 patch 2.9-02 patch >> ---------------------------------------------- >> Xenomai 2.5.6 OK OK >> >> Xenomai 2.6.1 boot fails boot fails >> >> >> Here is a boot log from 2.9-02 patch used with Xenomai 2.6.1 and the >> corresponding kernel .config. I used the same config file for all four >> tests and prepared and compiled the kernel with: >> >> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >> --linux=/usr/src/linux > > Ok, this does not match what you originally said, you originally said > the kernel was locking up after the "MP-BIOS bug: 8254 timer not > connected to IO-APIC", something changed between the tests? > > What about my suggestion to try the patch for Linux 3.2 which ships with > Xenomai 2.6.1? > >> >> copy saved configuration to /usr/src/linux/.config >> make xconfig (no changes, but save .config anyway) >> make -j 2 >> make modules_install >> make install >> >> I also tested this with Atom D2500 based board, and Xenomai 2.6.1 with >> 2.9-02 patch fails the same way with that too. Changed the processor >> type of course. > > Ok, there are a few things in your configuration I would change: > - enable ACPI, except for ACPI_PROCESSOR > - disable AUDIT_SYSCALL, KPROBES, PERF_EVENTS, OPROFILE, HPET_TIMER > But since the same configuration works with 2.5.6, it should work with > 2.6.1. In order to get the current git tip of Xenomai 2.6 running over non-core ipipe patched kernels I had to apply the attached patch. Now the code it patches is not in 2.6.1, but it might be related to the same IPIPE_CORE_APIREV checks, which in my opinion are not very clean in the current code. > > The things I would try to debug this issue: > - add some printks along the xenomai initialization to see what function > exactly is causing the issue (the usual suspect would be rthal_start_timer) > - try and enable the APIC or I/OAPIC nmi watchdog, so that it can tell > you where the lockup happens > - try 2.6.0 (which likely does not work either) > - if 2.6.0 does not work, try a "git bisect" between 2.5.6 and 2.6.0 > - if 2.6.0 works, try a "git bisect" between 2.6.0 and 2.6.1 > > On my side, I will try and use your kernel configuration on my atom, to > see if I reproduce the issue. > > Regards. > > -- > Gilles. > > _______________________________________________ > Xenomai mailing list > Xenomai@xenomai.org > http://www.xenomai.org/mailman/listinfo/xenomai -------------- next part -------------- A non-text attachment was scrubbed... Name: 0001-hal-x86-fix-compilation-over-non-core-kernels.patch Type: application/octet-stream Size: 749 bytes Desc: not available URL: <http://www.xenomai.org/pipermail/xenomai/attachments/20121003/0d67ab3c/attachment.obj> ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-10-03 14:38 ` Henri Roosen @ 2012-10-03 15:08 ` Philippe Gerum 2012-10-03 15:35 ` Henri Roosen 0 siblings, 1 reply; 16+ messages in thread From: Philippe Gerum @ 2012-10-03 15:08 UTC (permalink / raw) To: Henri Roosen; +Cc: Jari Lietzen, xenomai On 10/03/2012 04:38 PM, Henri Roosen wrote: > On Wed, Oct 3, 2012 at 10:18 AM, Gilles Chanteperdrix > <gilles.chanteperdrix@xenomai.org> wrote: >> On 10/03/2012 09:26 AM, Jari Lietzen wrote: >>> 27.09.2012 21:20, Gilles Chanteperdrix kirjoitti: >>>> On 09/27/2012 05:47 PM, Jari Lietzen wrote: >>>> >>>>> 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti: >>>>>> On 09/27/2012 07:49 AM, Jari Lietzen wrote: >>>>>> >>>>>>> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >>>>>>>> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >>>>>>>> >>>>>>>>> Hi! >>>>>>>>> >>>>>>>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >>>>>>>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>>>>>>>> >>>>>>>>> If I try to use Xenomai 2.6.1 the error message displayed is the same >>>>>>>>> and system just hangs after that. No other messages, keyboard doesn't >>>>>>>>> work, nothing. I started with the same kernel configuration, but I have >>>>>>>>> disabled a few options more (e.g. syscall auditing, shared interrupt >>>>>>>>> support). >>>>>>>>> >>>>>>>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >>>>>>>>> Obviously I'm missing something, but I can't figure that out. Here is >>>>>>>>> the kernel config file: >>>>>>>> >>>>>>>> >>>>>>>> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such >>>>>>>> as the patch for linux 3.2, do you also have the issue? >>>>>>>> >>>>>>> >>>>>>> Hi! >>>>>>> >>>>>>> Yes, I have patched the kernel with this: >>>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>>>>>> --linux=/usr/src/linux >>>>>>> >>>>>>> xenomai being a link to xenomai-2.6.1 -directory. When I switch between >>>>>>> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract >>>>>>> it from the source again and change the xenomai link accordingly. With >>>>>>> Xenomai 2.5.6 the patching was done with this: >>>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch >>>>>>> --linux=/usr/src/linux >>>>>> >>>>>> >>>>>> So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the >>>>>> 2.9-00 patch, or with the patch for linux 3.2 ? >>>>>> >>>>> >>>>> I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled Xenomai >>>>> 2.6.1 with the following commands: >>>> >>>> >>>> I mean Xenomai 2.6.1 kernel with the 2.9-00 patch or Xenomai 2.5.6 >>>> kernel with 2.9-00 patch. Since the kernel is not booting, we do not >>>> care about the user-space at this point. >>>> >>> >>> I tested again the following combinations. Always starting with a fresh >>> kernel tree and patching it: >>> >>> 2.9-00 patch 2.9-02 patch >>> ---------------------------------------------- >>> Xenomai 2.5.6 OK OK >>> >>> Xenomai 2.6.1 boot fails boot fails >>> >>> >>> Here is a boot log from 2.9-02 patch used with Xenomai 2.6.1 and the >>> corresponding kernel .config. I used the same config file for all four >>> tests and prepared and compiled the kernel with: >>> >>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>> --linux=/usr/src/linux >> >> Ok, this does not match what you originally said, you originally said >> the kernel was locking up after the "MP-BIOS bug: 8254 timer not >> connected to IO-APIC", something changed between the tests? >> >> What about my suggestion to try the patch for Linux 3.2 which ships with >> Xenomai 2.6.1? >> >>> >>> copy saved configuration to /usr/src/linux/.config >>> make xconfig (no changes, but save .config anyway) >>> make -j 2 >>> make modules_install >>> make install >>> >>> I also tested this with Atom D2500 based board, and Xenomai 2.6.1 with >>> 2.9-02 patch fails the same way with that too. Changed the processor >>> type of course. >> >> Ok, there are a few things in your configuration I would change: >> - enable ACPI, except for ACPI_PROCESSOR >> - disable AUDIT_SYSCALL, KPROBES, PERF_EVENTS, OPROFILE, HPET_TIMER >> But since the same configuration works with 2.5.6, it should work with >> 2.6.1. > > In order to get the current git tip of Xenomai 2.6 running over > non-core ipipe patched kernels I had to apply the attached patch. diff --git a/include/asm-x86/hal_32.h b/include/asm-x86/hal_32.h index 71ffa90..ec5355a 100644 --- a/include/asm-x86/hal_32.h +++ b/include/asm-x86/hal_32.h @@ -37,6 +37,8 @@ #ifndef _XENO_ASM_X86_HAL_32_H #define _XENO_ASM_X86_HAL_32_H +#include <asm/xenomai/wrappers.h> + #define RTHAL_ARCH_NAME "i386" #ifdef CONFIG_IPIPE_CORE # define RTHAL_TIMER_DEVICE (ipipe_timer_name()) @@ -53,8 +55,6 @@ # define RTHAL_CLOCK_DEVICE "pit" #endif -#include <asm/xenomai/wrappers.h> - #include <asm-generic/xenomai/hal.h> /* Read the generic bits. */ #ifndef CONFIG_X86_WP_WORKS_OK Now > the code it patches is not in 2.6.1, but it might be related to the > same IPIPE_CORE_APIREV checks, which in my opinion are not very clean > in the current code. You are welcome. -- Philippe. ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-10-03 15:08 ` Philippe Gerum @ 2012-10-03 15:35 ` Henri Roosen 0 siblings, 0 replies; 16+ messages in thread From: Henri Roosen @ 2012-10-03 15:35 UTC (permalink / raw) To: Philippe Gerum; +Cc: Jari Lietzen, xenomai On Wed, Oct 3, 2012 at 5:08 PM, Philippe Gerum <rpm@xenomai.org> wrote: > On 10/03/2012 04:38 PM, Henri Roosen wrote: >> On Wed, Oct 3, 2012 at 10:18 AM, Gilles Chanteperdrix >> <gilles.chanteperdrix@xenomai.org> wrote: >>> On 10/03/2012 09:26 AM, Jari Lietzen wrote: >>>> 27.09.2012 21:20, Gilles Chanteperdrix kirjoitti: >>>>> On 09/27/2012 05:47 PM, Jari Lietzen wrote: >>>>> >>>>>> 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti: >>>>>>> On 09/27/2012 07:49 AM, Jari Lietzen wrote: >>>>>>> >>>>>>>> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >>>>>>>>> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >>>>>>>>> >>>>>>>>>> Hi! >>>>>>>>>> >>>>>>>>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >>>>>>>>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>>>>>>>>> >>>>>>>>>> If I try to use Xenomai 2.6.1 the error message displayed is the same >>>>>>>>>> and system just hangs after that. No other messages, keyboard doesn't >>>>>>>>>> work, nothing. I started with the same kernel configuration, but I have >>>>>>>>>> disabled a few options more (e.g. syscall auditing, shared interrupt >>>>>>>>>> support). >>>>>>>>>> >>>>>>>>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >>>>>>>>>> Obviously I'm missing something, but I can't figure that out. Here is >>>>>>>>>> the kernel config file: >>>>>>>>> >>>>>>>>> >>>>>>>>> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such >>>>>>>>> as the patch for linux 3.2, do you also have the issue? >>>>>>>>> >>>>>>>> >>>>>>>> Hi! >>>>>>>> >>>>>>>> Yes, I have patched the kernel with this: >>>>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>>>>>>> --linux=/usr/src/linux >>>>>>>> >>>>>>>> xenomai being a link to xenomai-2.6.1 -directory. When I switch between >>>>>>>> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract >>>>>>>> it from the source again and change the xenomai link accordingly. With >>>>>>>> Xenomai 2.5.6 the patching was done with this: >>>>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch >>>>>>>> --linux=/usr/src/linux >>>>>>> >>>>>>> >>>>>>> So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the >>>>>>> 2.9-00 patch, or with the patch for linux 3.2 ? >>>>>>> >>>>>> >>>>>> I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled Xenomai >>>>>> 2.6.1 with the following commands: >>>>> >>>>> >>>>> I mean Xenomai 2.6.1 kernel with the 2.9-00 patch or Xenomai 2.5.6 >>>>> kernel with 2.9-00 patch. Since the kernel is not booting, we do not >>>>> care about the user-space at this point. >>>>> >>>> >>>> I tested again the following combinations. Always starting with a fresh >>>> kernel tree and patching it: >>>> >>>> 2.9-00 patch 2.9-02 patch >>>> ---------------------------------------------- >>>> Xenomai 2.5.6 OK OK >>>> >>>> Xenomai 2.6.1 boot fails boot fails >>>> >>>> >>>> Here is a boot log from 2.9-02 patch used with Xenomai 2.6.1 and the >>>> corresponding kernel .config. I used the same config file for all four >>>> tests and prepared and compiled the kernel with: >>>> >>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>>> --linux=/usr/src/linux >>> >>> Ok, this does not match what you originally said, you originally said >>> the kernel was locking up after the "MP-BIOS bug: 8254 timer not >>> connected to IO-APIC", something changed between the tests? >>> >>> What about my suggestion to try the patch for Linux 3.2 which ships with >>> Xenomai 2.6.1? >>> >>>> >>>> copy saved configuration to /usr/src/linux/.config >>>> make xconfig (no changes, but save .config anyway) >>>> make -j 2 >>>> make modules_install >>>> make install >>>> >>>> I also tested this with Atom D2500 based board, and Xenomai 2.6.1 with >>>> 2.9-02 patch fails the same way with that too. Changed the processor >>>> type of course. >>> >>> Ok, there are a few things in your configuration I would change: >>> - enable ACPI, except for ACPI_PROCESSOR >>> - disable AUDIT_SYSCALL, KPROBES, PERF_EVENTS, OPROFILE, HPET_TIMER >>> But since the same configuration works with 2.5.6, it should work with >>> 2.6.1. >> >> In order to get the current git tip of Xenomai 2.6 running over >> non-core ipipe patched kernels I had to apply the attached patch. > > diff --git a/include/asm-x86/hal_32.h b/include/asm-x86/hal_32.h > index 71ffa90..ec5355a 100644 > --- a/include/asm-x86/hal_32.h > +++ b/include/asm-x86/hal_32.h > @@ -37,6 +37,8 @@ > #ifndef _XENO_ASM_X86_HAL_32_H > #define _XENO_ASM_X86_HAL_32_H > > +#include <asm/xenomai/wrappers.h> > + > #define RTHAL_ARCH_NAME "i386" > #ifdef CONFIG_IPIPE_CORE > # define RTHAL_TIMER_DEVICE (ipipe_timer_name()) > @@ -53,8 +55,6 @@ > # define RTHAL_CLOCK_DEVICE "pit" > #endif > > -#include <asm/xenomai/wrappers.h> > - > #include <asm-generic/xenomai/hal.h> /* Read the generic bits. */ > > #ifndef CONFIG_X86_WP_WORKS_OK > > Now >> the code it patches is not in 2.6.1, but it might be related to the >> same IPIPE_CORE_APIREV checks, which in my opinion are not very clean >> in the current code. > > You are welcome. Thanks Philippe, your patch fixes the problem too. And in a better way. I just ran into a similar "2.5.6 working, 2.6.1 not" like described in this thread, so I thought I'd post it here. However, it might not be related to the tagged 2.6.1... > > > -- > Philippe. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-10-03 7:26 ` Jari Lietzen 2012-10-03 8:18 ` Gilles Chanteperdrix @ 2012-10-03 21:37 ` Gilles Chanteperdrix 2012-10-04 13:38 ` Jari Lietzen 1 sibling, 1 reply; 16+ messages in thread From: Gilles Chanteperdrix @ 2012-10-03 21:37 UTC (permalink / raw) To: Jari Lietzen; +Cc: xenomai On 10/03/2012 09:26 AM, Jari Lietzen wrote: > 27.09.2012 21:20, Gilles Chanteperdrix kirjoitti: >> On 09/27/2012 05:47 PM, Jari Lietzen wrote: >> >>> 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti: >>>> On 09/27/2012 07:49 AM, Jari Lietzen wrote: >>>> >>>>> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >>>>>> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >>>>>> >>>>>>> Hi! >>>>>>> >>>>>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >>>>>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>>>>>> >>>>>>> If I try to use Xenomai 2.6.1 the error message displayed is the same >>>>>>> and system just hangs after that. No other messages, keyboard doesn't >>>>>>> work, nothing. I started with the same kernel configuration, but I have >>>>>>> disabled a few options more (e.g. syscall auditing, shared interrupt >>>>>>> support). >>>>>>> >>>>>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >>>>>>> Obviously I'm missing something, but I can't figure that out. Here is >>>>>>> the kernel config file: >>>>>> >>>>>> >>>>>> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such >>>>>> as the patch for linux 3.2, do you also have the issue? >>>>>> >>>>> >>>>> Hi! >>>>> >>>>> Yes, I have patched the kernel with this: >>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>>>> --linux=/usr/src/linux >>>>> >>>>> xenomai being a link to xenomai-2.6.1 -directory. When I switch between >>>>> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract >>>>> it from the source again and change the xenomai link accordingly. With >>>>> Xenomai 2.5.6 the patching was done with this: >>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch >>>>> --linux=/usr/src/linux >>>> >>>> >>>> So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the >>>> 2.9-00 patch, or with the patch for linux 3.2 ? >>>> >>> >>> I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled Xenomai >>> 2.6.1 with the following commands: >> >> >> I mean Xenomai 2.6.1 kernel with the 2.9-00 patch or Xenomai 2.5.6 >> kernel with 2.9-00 patch. Since the kernel is not booting, we do not >> care about the user-space at this point. >> > > I tested again the following combinations. Always starting with a fresh > kernel tree and patching it: > > 2.9-00 patch 2.9-02 patch > ---------------------------------------------- > Xenomai 2.5.6 OK OK > > Xenomai 2.6.1 boot fails boot fails Hi, I could reproduce the bug, it should be fixed with the following patch: http://git.xenomai.org/?p=xenomai-2.6.git;a=commitdiff;h=28984e66e9e17701354f8883b025fcf83f8b0b68;hp=8417949f5e7d1b4483eb3b6344ec5f3124ecf740 -- Gilles. ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-10-03 21:37 ` Gilles Chanteperdrix @ 2012-10-04 13:38 ` Jari Lietzen 2012-10-07 17:50 ` Jari Lietzen 0 siblings, 1 reply; 16+ messages in thread From: Jari Lietzen @ 2012-10-04 13:38 UTC (permalink / raw) To: xenomai 04.10.2012 00:37, Gilles Chanteperdrix kirjoitti: > On 10/03/2012 09:26 AM, Jari Lietzen wrote: > >> 27.09.2012 21:20, Gilles Chanteperdrix kirjoitti: >>> On 09/27/2012 05:47 PM, Jari Lietzen wrote: >>> >>>> 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti: >>>>> On 09/27/2012 07:49 AM, Jari Lietzen wrote: >>>>> >>>>>> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >>>>>>> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >>>>>>> >>>>>>>> Hi! >>>>>>>> >>>>>>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error >>>>>>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>>>>>>> >>>>>>>> If I try to use Xenomai 2.6.1 the error message displayed is the same >>>>>>>> and system just hangs after that. No other messages, keyboard doesn't >>>>>>>> work, nothing. I started with the same kernel configuration, but I have >>>>>>>> disabled a few options more (e.g. syscall auditing, shared interrupt >>>>>>>> support). >>>>>>>> >>>>>>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard. >>>>>>>> Obviously I'm missing something, but I can't figure that out. Here is >>>>>>>> the kernel config file: >>>>>>> >>>>>>> >>>>>>> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such >>>>>>> as the patch for linux 3.2, do you also have the issue? >>>>>>> >>>>>> >>>>>> Hi! >>>>>> >>>>>> Yes, I have patched the kernel with this: >>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>>>>> --linux=/usr/src/linux >>>>>> >>>>>> xenomai being a link to xenomai-2.6.1 -directory. When I switch between >>>>>> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract >>>>>> it from the source again and change the xenomai link accordingly. With >>>>>> Xenomai 2.5.6 the patching was done with this: >>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch >>>>>> --linux=/usr/src/linux >>>>> >>>>> >>>>> So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the >>>>> 2.9-00 patch, or with the patch for linux 3.2 ? >>>>> >>>> >>>> I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled Xenomai >>>> 2.6.1 with the following commands: >>> >>> >>> I mean Xenomai 2.6.1 kernel with the 2.9-00 patch or Xenomai 2.5.6 >>> kernel with 2.9-00 patch. Since the kernel is not booting, we do not >>> care about the user-space at this point. >>> >> >> I tested again the following combinations. Always starting with a fresh >> kernel tree and patching it: >> >> 2.9-00 patch 2.9-02 patch >> ---------------------------------------------- >> Xenomai 2.5.6 OK OK >> >> Xenomai 2.6.1 boot fails boot fails > > > Hi, > > I could reproduce the bug, it should be fixed with the following patch: > http://git.xenomai.org/?p=xenomai-2.6.git;a=commitdiff;h=28984e66e9e17701354f8883b025fcf83f8b0b68;hp=8417949f5e7d1b4483eb3b6344ec5f3124ecf740 > This patch fixed the problem. I tested this with Core 2 Duo processor and hopefully I have time tomorrow to test it with Atom D2500 board also. Thank you for your help! Best regards, -Jari ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot 2012-10-04 13:38 ` Jari Lietzen @ 2012-10-07 17:50 ` Jari Lietzen 0 siblings, 0 replies; 16+ messages in thread From: Jari Lietzen @ 2012-10-07 17:50 UTC (permalink / raw) To: xenomai 04.10.2012 16:38, Jari Lietzen kirjoitti: > 04.10.2012 00:37, Gilles Chanteperdrix kirjoitti: >> On 10/03/2012 09:26 AM, Jari Lietzen wrote: >> >>> 27.09.2012 21:20, Gilles Chanteperdrix kirjoitti: >>>> On 09/27/2012 05:47 PM, Jari Lietzen wrote: >>>> >>>>> 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti: >>>>>> On 09/27/2012 07:49 AM, Jari Lietzen wrote: >>>>>> >>>>>>> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti: >>>>>>>> On 09/24/2012 09:09 PM, Jari Lietzen wrote: >>>>>>>> >>>>>>>>> Hi! >>>>>>>>> >>>>>>>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying >>>>>>>>> the error >>>>>>>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC". >>>>>>>>> >>>>>>>>> If I try to use Xenomai 2.6.1 the error message displayed is >>>>>>>>> the same >>>>>>>>> and system just hangs after that. No other messages, keyboard >>>>>>>>> doesn't >>>>>>>>> work, nothing. I started with the same kernel configuration, >>>>>>>>> but I have >>>>>>>>> disabled a few options more (e.g. syscall auditing, shared >>>>>>>>> interrupt >>>>>>>>> support). >>>>>>>>> >>>>>>>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM >>>>>>>>> motherboard. >>>>>>>>> Obviously I'm missing something, but I can't figure that out. >>>>>>>>> Here is >>>>>>>>> the kernel config file: >>>>>>>> >>>>>>>> >>>>>>>> If you use one of the I-pipe patches whih ship with Xenomai >>>>>>>> 2.6.1, such >>>>>>>> as the patch for linux 3.2, do you also have the issue? >>>>>>>> >>>>>>> >>>>>>> Hi! >>>>>>> >>>>>>> Yes, I have patched the kernel with this: >>>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch >>>>>>> >>>>>>> --linux=/usr/src/linux >>>>>>> >>>>>>> xenomai being a link to xenomai-2.6.1 -directory. When I switch >>>>>>> between >>>>>>> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and >>>>>>> extract >>>>>>> it from the source again and change the xenomai link accordingly. >>>>>>> With >>>>>>> Xenomai 2.5.6 the patching was done with this: >>>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64 >>>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch >>>>>>> >>>>>>> --linux=/usr/src/linux >>>>>> >>>>>> >>>>>> So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 >>>>>> with the >>>>>> 2.9-00 patch, or with the patch for linux 3.2 ? >>>>>> >>>>> >>>>> I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled >>>>> Xenomai >>>>> 2.6.1 with the following commands: >>>> >>>> >>>> I mean Xenomai 2.6.1 kernel with the 2.9-00 patch or Xenomai 2.5.6 >>>> kernel with 2.9-00 patch. Since the kernel is not booting, we do not >>>> care about the user-space at this point. >>>> >>> >>> I tested again the following combinations. Always starting with a fresh >>> kernel tree and patching it: >>> >>> 2.9-00 patch 2.9-02 patch >>> ---------------------------------------------- >>> Xenomai 2.5.6 OK OK >>> >>> Xenomai 2.6.1 boot fails boot fails >> >> >> Hi, >> >> I could reproduce the bug, it should be fixed with the following patch: >> http://git.xenomai.org/?p=xenomai-2.6.git;a=commitdiff;h=28984e66e9e17701354f8883b025fcf83f8b0b68;hp=8417949f5e7d1b4483eb3b6344ec5f3124ecf740 >> >> > > This patch fixed the problem. I tested this with Core 2 Duo processor > and hopefully I have time tomorrow to test it with Atom D2500 board also. > > Thank you for your help! > > Best regards, > > -Jari It's working fine with the Atom D2500 too. Best regards, -Jari ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2012-10-07 17:50 UTC | newest] Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2012-09-24 19:09 [Xenomai] Kernel 2.6.37.6 + Xenomai 2.5.6 is ok, but with Xenomai 2.6.1 it won't boot Jari Lietzen 2012-09-26 21:30 ` Gilles Chanteperdrix 2012-09-27 5:49 ` Jari Lietzen 2012-09-27 7:46 ` Gilles Chanteperdrix 2012-09-27 15:47 ` Jari Lietzen 2012-09-27 18:10 ` Gilles Chanteperdrix 2012-09-27 18:23 ` Gilles Chanteperdrix 2012-09-27 18:20 ` Gilles Chanteperdrix 2012-10-03 7:26 ` Jari Lietzen 2012-10-03 8:18 ` Gilles Chanteperdrix 2012-10-03 14:38 ` Henri Roosen 2012-10-03 15:08 ` Philippe Gerum 2012-10-03 15:35 ` Henri Roosen 2012-10-03 21:37 ` Gilles Chanteperdrix 2012-10-04 13:38 ` Jari Lietzen 2012-10-07 17:50 ` Jari Lietzen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.