* [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error
@ 2012-10-08 17:44 York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 02/28] powerpc/DPAA: " York Sun
` (26 more replies)
0 siblings, 27 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Fix compiling error in case CONFIG_SYS_PCIE2_MEM_VIRT or CONFIG_SYS_PCIE3_MEM_VIRT
not defined.
Signed-off-by: York Sun <yorksun@freescale.com>
---
drivers/pci/fsl_pci_init.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 0d46c96..1cf6158 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -276,14 +276,18 @@ static void fsl_pcie_boot_master_release_slave(int port)
release_addr = CONFIG_SYS_PCIE1_MEM_VIRT
+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
break;
+#ifdef CONFIG_SYS_PCIE2_MEM_VIRT
case 2:
release_addr = CONFIG_SYS_PCIE2_MEM_VIRT
+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
break;
+#endif
+#ifdef CONFIG_SYS_PCIE3_MEM_VIRT
case 3:
release_addr = CONFIG_SYS_PCIE3_MEM_VIRT
+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
break;
+#endif
default:
release_addr = 0;
break;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 02/28] powerpc/DPAA: Fix compiling error
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 03/28] powerpc/85xx: Add determining and report IFC frequency York Sun
` (25 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
FSL_HW_PORTAL_PME is used even when CONFIG_SYS_DPAA_PME is not defined.
Remove the #ifdef.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/include/asm/fsl_portals.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h
index 5644044..9a764d2 100644
--- a/arch/powerpc/include/asm/fsl_portals.h
+++ b/arch/powerpc/include/asm/fsl_portals.h
@@ -32,9 +32,7 @@ enum fsl_dpaa_dev {
FSL_HW_PORTAL_FMAN2,
#endif
#endif
-#ifdef CONFIG_SYS_DPAA_PME
FSL_HW_PORTAL_PME,
-#endif
#ifdef CONFIG_SYS_FSL_RAID_ENGINE
FSL_HW_PORTAL_RAID_ENGINE,
#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 03/28] powerpc/85xx: Add determining and report IFC frequency
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 02/28] powerpc/DPAA: " York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 04/28] powerpc/mpc85xx: Introduce new macros to add and delete TLB entries York Sun
` (24 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
From: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/cpu/mpc85xx/cpu.c | 4 ++++
arch/powerpc/cpu/mpc85xx/speed.c | 11 +++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 5ddb294..515dd41 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -181,6 +181,10 @@ int checkcpu (void)
}
#endif
+#if defined(CONFIG_FSL_IFC)
+ printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+#endif
+
#ifdef CONFIG_CPM2
printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index abfeb26..cbdf293 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -39,6 +39,10 @@ DECLARE_GLOBAL_DATA_PTR;
void get_sys_info (sys_info_t * sysInfo)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_FSL_IFC
+ struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+ u32 ccr;
+#endif
#ifdef CONFIG_FSL_CORENET
volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
unsigned int cpu;
@@ -228,6 +232,13 @@ void get_sys_info (sys_info_t * sysInfo)
sysInfo->freqLocalBus = lcrr_div;
}
#endif
+
+#if defined(CONFIG_FSL_IFC)
+ ccr = in_be32(&ifc_regs->ifc_ccr);
+ ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
+
+ sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr;
+#endif
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 04/28] powerpc/mpc85xx: Introduce new macros to add and delete TLB entries
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 02/28] powerpc/DPAA: " York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 03/28] powerpc/85xx: Add determining and report IFC frequency York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-22 9:14 ` Andy Fleming
2012-10-08 17:44 ` [U-Boot] [PATCH 05/28] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500 York Sun
` (23 subsequent siblings)
26 siblings, 1 reply; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
These assembly macros simplify codes to add and delete temporary TLB entries.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/start.S | 309 ++++++++++++++++----------------------
1 file changed, 130 insertions(+), 179 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 9e04257..3fe22bf 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -211,6 +211,77 @@ l2_disabled:
andi. r1,r3,L1CSR0_DCE at l
beq 2b
+ .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch
+ lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
+ mtspr MAS0, \scratch
+ lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
+ mtspr MAS3, \scratch
+ lis \scratch, \phy_high at h
+ ori \scratch, \scratch, \phy_high at l
+ mtspr MAS7, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch
+ lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
+ mtspr MAS0, \scratch
+ lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
+ mtspr MAS3, \scratch
+ lis \scratch, \phy_high at h
+ ori \scratch, \scratch, \phy_high at l
+ mtspr MAS7, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro delete_tlb1_entry esel scratch
+ lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
+ mtspr MAS0, \scratch
+ li \scratch, 0
+ mtspr MAS1, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro delete_tlb0_entry esel epn wimg scratch
+ lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
+ mtspr MAS0, \scratch
+ li \scratch, 0
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
/*
* TLB entry for debuggging in AS1
@@ -220,61 +291,35 @@ l2_disabled:
* in AS1.
*/
- lis r6,FSL_BOOKE_MAS0(1,
- CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1,
- CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l
-
#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
/*
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
* bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
* and this window is outside of 4K boot window.
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
- (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
- (MAS2_I|MAS2_G))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB,
+ 0, BOOKE_PAGESZ_4M,
+ CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G,
+ 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR,
+ 0, r6
- /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
- lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB,
+ 0, BOOKE_PAGESZ_1M,
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G,
+ CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR,
+ 0, r6
#else
/*
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
* because "nexti" will resize TLB to 4K
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,
- (MAS2_I))@l
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB,
+ 0, BOOKE_PAGESZ_256K,
+ CONFIG_SYS_MONITOR_BASE, MAS2_I,
+ CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR,
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- tlbwe
- isync
#endif
/*
@@ -392,27 +437,11 @@ l2_disabled:
*/
/* create a temp mapping TLB0[0] for LBCR */
- lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
-
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
+ create_tlb0_entry 0,
+ 0, BOOKE_PAGESZ_4K,
+ CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G,
+ CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR,
+ 0, r6
/* Set LBCR register */
lis r4,CONFIG_SYS_LBCR_ADDR at h
@@ -551,49 +580,22 @@ create_ccsr_new_tlb:
ori r8, r8, CONFIG_SYS_CCSRBAR at l
lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
- lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
- lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
- ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
- lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h
- ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH at h
- ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH at l
- mtspr MAS7, r7
-#endif
- mtspr MAS0, r0
- mtspr MAS1, r1
- mtspr MAS2, r2
- mtspr MAS3, r3
- isync
- msync
- tlbwe
-
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
/*
* Create a TLB for the current location of CCSR. Register R9 is reserved
* for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000).
*/
create_ccsr_old_tlb:
- lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
- lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h
- ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- li r7, 0 /* The default CCSR address is always a 32-bit number */
- mtspr MAS7, r7
-#endif
- mtspr MAS0, r0
- /* MAS1 is the same as above */
- mtspr MAS2, r2
- mtspr MAS3, r3
- isync
- msync
- tlbwe
+ create_tlb0_entry 1, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \
+ 0, r3 /* The default CCSR address is always a 32-bit number */
+
/*
* We have a TLB for what we think is the current (old) CCSR. Let's
@@ -743,27 +745,9 @@ write_new_ccsrbar:
/* Delete the temporary TLBs */
delete_temp_tlbs:
- lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
- li r1, 0
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
- mtspr MAS0, r0
- mtspr MAS1, r1
- mtspr MAS2, r2
- isync
- msync
- tlbwe
+ delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3
+ delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3
- lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
- mtspr MAS0, r0
- mtspr MAS2, r2
- isync
- msync
- tlbwe
#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
@@ -1019,83 +1003,50 @@ create_init_ram_area:
#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
/* create a temp mapping in AS=1 to the 4M boot window */
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_4M, \
+ CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
+ 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
- /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
- lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
/* create a temp mapping in AS = 1 for Flash mapping
* created by PBL for ISBC code
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#else
/*
* create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main
* image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage.
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
/* create a temp mapping in AS=1 to the stack */
- lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
-
#if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \
defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH)
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
- li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH
- mtspr MAS7,r10
+ create_tlb1_entry 14, \
+ 1, BOOKE_PAGESZ_16K, \
+ CONFIG_SYS_INIT_RAM_ADDR, 0, \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6
+
#else
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 14, \
+ 1, BOOKE_PAGESZ_16K, \
+ CONFIG_SYS_INIT_RAM_ADDR, 0, \
+ CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
lis r6,MSR_IS|MSR_DS|MSR_DE at h
ori r6,r6,MSR_IS|MSR_DS|MSR_DE at l
lis r7,switch_as at h
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 05/28] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (2 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 04/28] powerpc/mpc85xx: Introduce new macros to add and delete TLB entries York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 06/28] powerpc/mpc85xx: change RCW MEM_PLL_PLAT for Chassis generation 2 York Sun
` (22 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Using E6500 L1 cache as initram requires L2 cache enabled.
Add l2-cache cluster enabling.
Setup stash id for L1 cache as (coreID) * 2 + 32 + 0
Setup stash id for L2 cache as (cluster) * 2 + 32 + 1
Stash id for L2 is only set for Chassis 2.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
arch/powerpc/cpu/mpc85xx/cpu_init.c | 50 ++++++++++++++++++++++++++--
arch/powerpc/cpu/mpc85xx/fdt.c | 14 +++++++-
arch/powerpc/cpu/mpc85xx/release.S | 14 ++++----
arch/powerpc/cpu/mpc85xx/start.S | 37 ++++++++++++++++++++-
arch/powerpc/include/asm/immap_85xx.h | 59 +++++++++++++++++++++++++++++++++
5 files changed, 163 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index afb5671..f46deca 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -295,6 +295,43 @@ static void __fsl_serdes__init(void)
}
__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int enable_cluster_l2(void)
+{
+ int i = 0;
+ u32 cluster;
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct ccsr_cluster_l2 __iomem *l2cache;
+
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ if (cluster & TP_CLUSTER_EOC)
+ return 0;
+
+ /* The first cache has already been set up, so skip it */
+ i++;
+
+ /* Look through the remaining clusters, and set up their caches */
+ do {
+ l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+
+ /* set stash ID to (cluster) * 2 + 32 + 1 */
+ clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+
+ printf("enable l2 for cluster %d %p\n", i, l2cache);
+
+ out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
+ while ((in_be32(&l2cache->l2csr0) &
+ (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
+ ;
+ out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+ i++;
+ } while (!(cluster & TP_CLUSTER_EOC));
+
+ return 0;
+}
+#endif
+
/*
* Initialize L2 as cache.
*
@@ -306,7 +343,12 @@ int cpu_init_r(void)
{
__maybe_unused u32 svr = get_svr();
#ifdef CONFIG_SYS_LBC_LCRR
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+ fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
+#endif
+#ifdef CONFIG_L2_CACHE
+ ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+ struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
@@ -356,7 +398,6 @@ int cpu_init_r(void)
puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
- volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
volatile uint cache_ctl;
uint ver;
u32 l2siz_field;
@@ -467,6 +508,11 @@ int cpu_init_r(void)
}
skip_l2:
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+ if (l2cache->l2csr0 & L2CSR0_L2E)
+ printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+
+ enable_cluster_l2();
#else
puts("disabled\n");
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index a0a9b4c..d54527a 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -220,12 +220,19 @@ static inline void ft_fixup_l2cache(void *blob)
/* we dont bother w/L3 since no platform of this type has one */
}
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
+ defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
static inline void ft_fixup_l2cache(void *blob)
{
int off, l2_off, l3_off = -1;
u32 *ph;
+#ifdef CONFIG_BACKSIDE_L2_CACHE
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+#else
+ struct ccsr_cluster_l2 *l2cache =
+ (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
+ u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
+#endif
u32 size, line_size, num_ways, num_sets;
int has_l2 = 1;
@@ -257,7 +264,12 @@ static inline void ft_fixup_l2cache(void *blob)
if (has_l2) {
#ifdef CONFIG_SYS_CACHE_STASHING
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ /* Only initialize every eighth thread */
+ if (reg && !((*reg) % 8))
+#else
if (reg)
+#endif
fdt_setprop_cell(blob, l2_off, "cache-stash-id",
(*reg * 2) + 32 + 1);
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 22e73e0..d9061c3 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -183,13 +183,6 @@ __secondary_start_page:
slwi r8,r4,5
add r10,r3,r8
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
- /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
- slwi r8,r4,1
- addi r8,r8,32
- mtspr L1CSR2,r8
-#endif
-
#ifdef CONFIG_E6500
mfspr r0,SPRN_PIR
/*
@@ -209,6 +202,13 @@ __secondary_start_page:
mtspr SPRN_PIR,r4 /* write to PIR register */
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ slwi r8,r4,1
+ addi r8,r8,32
+ mtspr L1CSR2,r8
+#endif
+
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
/*
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 3fe22bf..296cc95 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -169,7 +169,7 @@ l2_disabled:
*
*/
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+#ifdef CONFIG_SYS_CACHE_STASHING
/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
li r2,(32 + 0)
mtspr L1CSR2,r2
@@ -750,6 +750,41 @@ delete_temp_tlbs:
#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+create_ccsr_l2_tlb:
+ /*
+ * Create a TLB for the MMR location of CCSR
+ * to access L2CSR0 register
+ */
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
+
+enable_l2_cluster_l2:
+ /* enable L2 cache */
+ lis r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h
+ ori r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l
+ li r4, 33 /* stash id */
+ stw r4, 4(r3)
+ lis r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h
+ ori r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l
+ sync
+ stw r4, 0(r3) /* invalidate L2 */
+1: sync
+ lwz r0, 0(r3)
+ twi 0, r0, 0
+ isync
+ and. r1, r0, r4
+ bne 1b
+ lis r4, L2CSR0_L2E at h
+ sync
+ stw r4, 0(r3) /* eanble L2 */
+delete_ccsr_l2_tlb:
+ delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3
+#endif
+
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
#define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000)
#define LAW_SIZE_1M 0x13
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 7de33a7..1e3e4b9 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2666,6 +2666,7 @@ struct ccsr_rman {
#define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET 0x58b000
#define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET 0x58c000
#define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET 0x590000
+#define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET 0xC20000
#else
#define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000
#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000
@@ -2808,4 +2809,62 @@ struct ccsr_rman {
#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+struct ccsr_cluster_l2 {
+ u32 l2csr0; /* 0x000 L2 cache control and status register 0 */
+ u32 l2csr1; /* 0x004 L2 cache control and status register 1 */
+ u32 l2cfg0; /* 0x008 L2 cache configuration register 0 */
+ u8 res_0c[500];/* 0x00c - 0x1ff */
+ u32 l2pir0; /* 0x200 L2 cache partitioning ID register 0 */
+ u8 res_204[4];
+ u32 l2par0; /* 0x208 L2 cache partitioning allocation register 0 */
+ u32 l2pwr0; /* 0x20c L2 cache partitioning way register 0 */
+ u32 l2pir1; /* 0x210 L2 cache partitioning ID register 1 */
+ u8 res_214[4];
+ u32 l2par1; /* 0x218 L2 cache partitioning allocation register 1 */
+ u32 l2pwr1; /* 0x21c L2 cache partitioning way register 1 */
+ u32 u2pir2; /* 0x220 L2 cache partitioning ID register 2 */
+ u8 res_224[4];
+ u32 l2par2; /* 0x228 L2 cache partitioning allocation register 2 */
+ u32 l2pwr2; /* 0x22c L2 cache partitioning way register 2 */
+ u32 l2pir3; /* 0x230 L2 cache partitioning ID register 3 */
+ u8 res_234[4];
+ u32 l2par3; /* 0x238 L2 cache partitining allocation register 3 */
+ u32 l2pwr3; /* 0x23c L2 cache partitining way register 3 */
+ u32 l2pir4; /* 0x240 L2 cache partitioning ID register 3 */
+ u8 res244[4];
+ u32 l2par4; /* 0x248 L2 cache partitioning allocation register 3 */
+ u32 l2pwr4; /* 0x24c L2 cache partitioning way register 3 */
+ u32 l2pir5; /* 0x250 L2 cache partitioning ID register 3 */
+ u8 res_254[4];
+ u32 l2par5; /* 0x258 L2 cache partitioning allocation register 3 */
+ u32 l2pwr5; /* 0x25c L2 cache partitioning way register 3 */
+ u32 l2pir6; /* 0x260 L2 cache partitioning ID register 3 */
+ u8 res_264[4];
+ u32 l2par6; /* 0x268 L2 cache partitioning allocation register 3 */
+ u32 l2pwr6; /* 0x26c L2 cache partitioning way register 3 */
+ u32 l2pir7; /* 0x270 L2 cache partitioning ID register 3 */
+ u8 res274[4];
+ u32 l2par7; /* 0x278 L2 cache partitioning allocation register 3 */
+ u32 l2pwr7; /* 0x27c L2 cache partitioning way register 3 */
+ u8 res_280[0xb80]; /* 0x280 - 0xdff */
+ u32 l2errinjhi; /* 0xe00 L2 cache error injection mask high */
+ u32 l2errinjlo; /* 0xe04 L2 cache error injection mask low */
+ u32 l2errinjctl;/* 0xe08 L2 cache error injection control */
+ u8 res_e0c[20]; /* 0xe0c - 0x01f */
+ u32 l2captdatahi; /* 0xe20 L2 cache error capture data high */
+ u32 l2captdatalo; /* 0xe24 L2 cache error capture data low */
+ u32 l2captecc; /* 0xe28 L2 cache error capture ECC syndrome */
+ u8 res_e2c[20]; /* 0xe2c - 0xe3f */
+ u32 l2errdet; /* 0xe40 L2 cache error detect */
+ u32 l2errdis; /* 0xe44 L2 cache error disable */
+ u32 l2errinten; /* 0xe48 L2 cache error interrupt enable */
+ u32 l2errattr; /* 0xe4c L2 cache error attribute */
+ u32 l2erreaddr; /* 0xe50 L2 cache error extended address */
+ u32 l2erraddr; /* 0xe54 L2 cache error address */
+ u32 l2errctl; /* 0xe58 L2 cache error control */
+};
+#define CONFIG_SYS_FSL_CLUSTER_1_L2 \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET)
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
#endif /*__IMMAP_85xx__*/
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 06/28] powerpc/mpc85xx: change RCW MEM_PLL_PLAT for Chassis generation 2
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (3 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 05/28] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500 York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 07/28] powerpc/mpc85xx: check number of cores York Sun
` (21 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Chassis generation 2 has different mask and shift. Use macro instead of
magic numbers.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/speed.c | 4 +++-
arch/powerpc/include/asm/immap_85xx.h | 7 +++++++
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index cbdf293..b6bc131 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -85,7 +85,9 @@ void get_sys_info (sys_info_t * sysInfo)
sysInfo->freqDDRBus = sysclk;
sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
- mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f;
+ mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
+ FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
+ & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
if (mem_pll_rat > 2)
sysInfo->freqDDRBus *= mem_pll_rat;
else
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 1e3e4b9..1682c0f 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1755,6 +1755,13 @@ typedef struct ccsr_gur {
u32 brrl; /* Boot release */
u8 res17[24];
u32 rcwsr[16]; /* Reset control word status */
+#ifndef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 17
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x1f
+#else
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f
+#endif
#define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000
#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080
#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 07/28] powerpc/mpc85xx: check number of cores
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (4 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 06/28] powerpc/mpc85xx: change RCW MEM_PLL_PLAT for Chassis generation 2 York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 08/28] powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 York Sun
` (20 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Panic if the number of cores is more than CONFIG_MAX_CPUS because it will
surely overflow gd structure.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/cpu.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 515dd41..11b83d2 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -127,6 +127,11 @@ int checkcpu (void)
printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
+ if (nr_cores > CONFIG_MAX_CPUS) {
+ panic("\nUnexpected number of cores: %d, max is %d\n",
+ nr_cores, CONFIG_MAX_CPUS);
+ }
+
get_sys_info(&sysinfo);
puts("Clock Configuration:");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 08/28] powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (5 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 07/28] powerpc/mpc85xx: check number of cores York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 09/28] powerpc/mpc85xx: expand SERDES reference clock select bit York Sun
` (19 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Corenet based SoCs have different core clocks starting from Chassis
generation 2. Cores are organized into clusters. Each cluster has up to
4 cores sharing same clock, which can be chosen from one of three PLLs in
the cluster group with one of the devisors /1, /2 or /4. Two clusters are
put together as a cluster group. These two clusters share the PLLs but may
have different divisor. For example, core 0~3 are in cluster 1. Core 4~7
are in cluster 2. Core 8~11 are in cluster 3 and so on. Cluster 1 and 2
are cluster group A. Cluster 3 and 4 are in cluster group B. Cluster group
A has PLL1, PLL2, PLL3. Cluster group B has PLL4, PLL5. Core 0~3 may have
PLL1/2, core 4~7 may have PLL2/2. Core 8~11 may have PLL4/1.
PME and FMan blocks can take different PLLs, configured by RCW.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/speed.c | 138 ++++++++++++++++++++++++++++++---
arch/powerpc/include/asm/immap_85xx.h | 36 +++++----
2 files changed, 148 insertions(+), 26 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index b6bc131..761441f 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -76,8 +76,8 @@ void get_sys_info (sys_info_t * sysInfo)
[13] = 2, /* CC4 PPL / 2 */
[14] = 4, /* CC4 PPL / 4 */
};
- uint lcrr_div, i, freqCC_PLL[4], rcw_tmp;
- uint ratio[4];
+ uint i, freqCC_PLL[6], rcw_tmp;
+ uint ratio[6];
unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
uint mem_pll_rat;
@@ -97,21 +97,139 @@ void get_sys_info (sys_info_t * sysInfo)
ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f;
ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f;
- for (i = 0; i < 4; i++) {
+ ratio[4] = (in_be32(&clk->pllc5gsr) >> 1) & 0x3f;
+ ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f;
+ for (i = 0; i < 6; i++) {
if (ratio[i] > 4)
freqCC_PLL[i] = sysclk * ratio[i];
else
freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i];
}
- rcw_tmp = in_be32(&gur->rcwsr[3]);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ /*
+ * Each cluster has up to 4 cores, sharing the same PLL selection.
+ * The cluster assignment is fixed per SoC. There is no way identify the
+ * assignment so far, presuming the "first configuration" which is to
+ * fill the lower cluster group first before moving up to next group.
+ * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1
+ * and core 4~7 on cluster 2
+ * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3
+ * and core 12~15 on cluster 4 if existing
+ */
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27)
+ & 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+ if (cplx_pll > 3)
+ printf("Unsupported architecture configuration"
+ " in function %s\n", __func__);
+ cplx_pll += (cpu / 8) * 3;
sysInfo->freqProcessor[cpu] =
freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
}
+#define PME_CLK_SEL 0xe0000000
+#define PME_CLK_SHIFT 29
+#define FM1_CLK_SEL 0x1c000000
+#define FM1_CLK_SHIFT 26
+ rcw_tmp = in_be32(&gur->rcwsr[7]);
+
+#ifdef CONFIG_SYS_DPAA_PME
+ switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqPME = freqCC_PLL[0];
+ break;
+ case 2:
+ sysInfo->freqPME = freqCC_PLL[0] / 2;
+ break;
+ case 3:
+ sysInfo->freqPME = freqCC_PLL[0] / 3;
+ break;
+ case 4:
+ sysInfo->freqPME = freqCC_PLL[0] / 4;
+ break;
+ case 6:
+ sysInfo->freqPME = freqCC_PLL[1] / 2;
+ break;
+ case 7:
+ sysInfo->freqPME = freqCC_PLL[1] / 3;
+ break;
+ default:
+ printf("Error: Unknown PME clock select!\n");
+ case 0:
+ sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+ break;
+
+ }
+#endif
+#ifdef CONFIG_SYS_DPAA_FMAN
+ switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqFMan[0] = freqCC_PLL[3];
+ break;
+ case 2:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 2;
+ break;
+ case 3:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 3;
+ break;
+ case 4:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
+ break;
+ case 6:
+ sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
+ break;
+ case 7:
+ sysInfo->freqFMan[0] = freqCC_PLL[4] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan1 clock select!\n");
+ case 0:
+ sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#if (CONFIG_SYS_NUM_FMAN) == 2
+#define FM2_CLK_SEL 0x00000038
+#define FM2_CLK_SHIFT 3
+ rcw_tmp = in_be32(&gur->rcwsr[15]);
+ switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqFMan[1] = freqCC_PLL[4];
+ break;
+ case 2:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 2;
+ break;
+ case 3:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 3;
+ break;
+ case 4:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 4;
+ break;
+ case 6:
+ sysInfo->freqFMan[1] = freqCC_PLL[3] / 2;
+ break;
+ case 7:
+ sysInfo->freqFMan[1] = freqCC_PLL[3] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan2 clock select!\n");
+ case 0:
+ sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#endif /* CONFIG_SYS_NUM_FMAN == 2 */
+#endif /* CONFIG_SYS_DPAA_FMAN */
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+
+ sysInfo->freqProcessor[cpu] =
+ freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+ }
#define PME_CLK_SEL 0x80000000
#define FM1_CLK_SEL 0x40000000
#define FM2_CLK_SEL 0x20000000
@@ -157,11 +275,10 @@ void get_sys_info (sys_info_t * sysInfo)
#endif
#endif
-#else
- uint plat_ratio,e500_ratio,half_freqSystemBus;
-#if defined(CONFIG_FSL_LBC)
- uint lcrr_div;
-#endif
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+#else /* CONFIG_FSL_CORENET */
+ uint plat_ratio, e500_ratio, half_freqSystemBus;
int i;
#ifdef CONFIG_QE
__maybe_unused u32 qe_ratio;
@@ -208,6 +325,7 @@ void get_sys_info (sys_info_t * sysInfo)
#endif /* CONFIG_FSL_CORENET */
#if defined(CONFIG_FSL_LBC)
+ uint lcrr_div;
#if defined(CONFIG_SYS_LBC_LCRR)
/* We will program LCRR to this value later */
lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 1682c0f..7616d16 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1887,34 +1887,38 @@ typedef struct ccsr_gur {
#define rmuliodnr rio1maintliodnr
typedef struct ccsr_clk {
- u32 clkc0csr; /* Core 0 Clock control/status */
+ u32 clkc0csr; /* 0x000 Core 0 Clock control/status */
u8 res1[0x1c];
- u32 clkc1csr; /* Core 1 Clock control/status */
+ u32 clkc1csr; /* 0x020 Core 1 Clock control/status */
u8 res2[0x1c];
- u32 clkc2csr; /* Core 2 Clock control/status */
+ u32 clkc2csr; /* 0x040 Core 2 Clock control/status */
u8 res3[0x1c];
- u32 clkc3csr; /* Core 3 Clock control/status */
+ u32 clkc3csr; /* 0x060 Core 3 Clock control/status */
u8 res4[0x1c];
- u32 clkc4csr; /* Core 4 Clock control/status */
+ u32 clkc4csr; /* 0x080 Core 4 Clock control/status */
u8 res5[0x1c];
- u32 clkc5csr; /* Core 5 Clock control/status */
+ u32 clkc5csr; /* 0x0a0 Core 5 Clock control/status */
u8 res6[0x1c];
- u32 clkc6csr; /* Core 6 Clock control/status */
+ u32 clkc6csr; /* 0x0c0 Core 6 Clock control/status */
u8 res7[0x1c];
- u32 clkc7csr; /* Core 7 Clock control/status */
+ u32 clkc7csr; /* 0x0e0 Core 7 Clock control/status */
u8 res8[0x71c];
- u32 pllc1gsr; /* Cluster PLL 1 General Status */
+ u32 pllc1gsr; /* 0x800 Cluster PLL 1 General Status */
u8 res10[0x1c];
- u32 pllc2gsr; /* Cluster PLL 2 General Status */
+ u32 pllc2gsr; /* 0x820 Cluster PLL 2 General Status */
u8 res11[0x1c];
- u32 pllc3gsr; /* Cluster PLL 3 General Status */
+ u32 pllc3gsr; /* 0x840 Cluster PLL 3 General Status */
u8 res12[0x1c];
- u32 pllc4gsr; /* Cluster PLL 4 General Status */
- u8 res13[0x39c];
- u32 pllpgsr; /* Platform PLL General Status */
+ u32 pllc4gsr; /* 0x860 Cluster PLL 4 General Status */
+ u8 res13[0x1c];
+ u32 pllc5gsr; /* 0x880 Cluster PLL 5 General Status */
u8 res14[0x1c];
- u32 plldgsr; /* DDR PLL General Status */
- u8 res15[0x3dc];
+ u32 pllc6gsr; /* 0x8a0 Cluster PLL 6 General Status */
+ u8 res15[0x35c];
+ u32 pllpgsr; /* 0xc00 Platform PLL General Status */
+ u8 res16[0x1c];
+ u32 plldgsr; /* 0xc20 DDR PLL General Status */
+ u8 res17[0x3dc];
} ccsr_clk_t;
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 09/28] powerpc/mpc85xx: expand SERDES reference clock select bit
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (6 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 08/28] powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 10/28] powerpc/e6500: Move QCSP registers for QMan v3 York Sun
` (18 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Expand the reference clock select to three bits
000: 100 MHz
001: 125 MHz
010: 156.25MHz
011: 150 MHz
100: 161.1328125 MHz
All others reserved
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/include/asm/immap_85xx.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 7616d16..1b1db16 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2403,11 +2403,12 @@ typedef struct serdes_corenet {
#define SRDS_RSTCTL_RSTERR 0x20000000
#define SRDS_RSTCTL_SDPD 0x00000020
u32 pllcr0; /* PLL Control Register 0 */
-#define SRDS_PLLCR0_RFCK_SEL_MASK 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
#define SRDS_PLLCR0_FRATE_SEL_MASK 0x00030000
#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
#define SRDS_PLLCR0_FRATE_SEL_6_25 0x00010000
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 10/28] powerpc/e6500: Move QCSP registers for QMan v3
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (7 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 09/28] powerpc/mpc85xx: expand SERDES reference clock select bit York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 11/28] powerpc/mpc85xx: Add RCW bits and registers for SerDes for corenet2 York Sun
` (17 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
The QCSP registers are expanded and moved from offset 0 to offset 0x1000
for SoCs with QMan v3.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/include/asm/immap_85xx.h | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 1b1db16..de59ccf 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2535,13 +2535,16 @@ typedef struct ccsr_sec {
#endif
typedef struct ccsr_qman {
+#ifdef CONFIG_SYS_FSL_QMAN_V3
+ u8 res0[0x200];
+#else
struct {
u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */
u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */
u32 res;
u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg */
} qcsp[32];
-
+#endif
/* Not actually reserved, but irrelevant to u-boot */
u8 res[0xbf8 - 0x200];
u32 ip_rev_1;
@@ -2566,6 +2569,14 @@ typedef struct ccsr_qman {
u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */
u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */
u8 res7[0x2e8];
+#ifdef CONFIG_SYS_FSL_QMAN_V3
+ struct {
+ u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */
+ u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */
+ u32 res;
+ u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg*/
+ } qcsp[50];
+#endif
} ccsr_qman_t;
typedef struct ccsr_bman {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 11/28] powerpc/mpc85xx: Add RCW bits and registers for SerDes for corenet2
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (8 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 10/28] powerpc/e6500: Move QCSP registers for QMan v3 York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 12/28] powerpc/corenet2: Add " York Sun
` (16 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Corenet 2nd generation Chassis has different RCW and registers for SerDes.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
---
arch/powerpc/include/asm/immap_85xx.h | 98 +++++++++++++++++++++++++++++++--
1 file changed, 93 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index de59ccf..c3ed6b1 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1755,13 +1755,30 @@ typedef struct ccsr_gur {
u32 brrl; /* Boot release */
u8 res17[24];
u32 rcwsr[16]; /* Reset control word status */
-#ifndef CONFIG_SYS_FSL_QORIQ_CHASSIS2
-#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 17
-#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x1f
-#else
+
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16
#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f
-#endif
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17
+#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL 0x0000f800
+#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT 11
+#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL 0x000000f8
+#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT 3
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL1 0x00200000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL2 0x00100000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL1 0x00080000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL2 0x00040000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL1 0x00020000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL2 0x00010000
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 17
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x1f
#define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000
#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080
#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7
@@ -1769,6 +1786,8 @@ typedef struct ccsr_gur {
#define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000
#define FSL_CORENET_RCWSRn_SRDS_LPD_B2 0x3c000000 /* bits 162..165 */
#define FSL_CORENET_RCWSRn_SRDS_LPD_B3 0x003c0000 /* bits 170..173 */
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
#define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000
#define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000
#define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000
@@ -2395,6 +2414,74 @@ typedef struct ccsr_gur {
#define SDHCDCR_CD_INV 0x80000000 /* invert SDHC card detect */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define MAX_SERDES 4
+typedef struct serdes_corenet {
+ struct {
+ u32 rstctl; /* Reset Control Register */
+#define SRDS_RSTCTL_RST 0x80000000
+#define SRDS_RSTCTL_RSTDONE 0x40000000
+#define SRDS_RSTCTL_RSTERR 0x20000000
+#define SRDS_RSTCTL_SWRST 0x10000000
+#define SRDS_RSTCTL_SDPD 0x00000020
+ u32 pllcr0; /* PLL Control Register 0 */
+#define SRDS_PLLCR0_POFF 0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000
+#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000
+ u32 pllcr1; /* PLL Control Register 1 */
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+ u32 res_0c; /* 0x00c */
+ u32 pllcr3;
+ u32 pllcr4;
+ u8 res_18[0x20-0x18];
+ } bank[2];
+ u8 res_40[0x90-0x40];
+ u32 srdstcalcr; /* 0x90 TX Calibration Control */
+ u8 res_94[0xa0-0x94];
+ u32 srdsrcalcr; /* 0xa0 RX Calibration Control */
+ u8 res_a4[0xb0-0xa4];
+ u32 srdsgr0; /* 0xb0 General Register 0 */
+ u8 res_b4[0xe0-0xb4];
+ u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */
+ u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */
+ u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */
+ u32 srdspccr3; /* 0xec Protocol Converter Config 3 */
+ u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */
+ u8 res_f4[0x100-0xf4];
+ struct {
+ u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */
+ u8 res_104[0x120-0x104];
+ } srdslnpssr[8];
+ u8 res_200[0x800-0x200];
+ struct {
+ u32 gcr0; /* 0x800 General Control Register 0 */
+ u32 gcr1; /* 0x804 General Control Register 1 */
+ u32 gcr2; /* 0x808 General Control Register 2 */
+ u32 res_80c;
+ u32 recr0; /* 0x810 Receive Equalization Control */
+ u32 res_814;
+ u32 tecr0; /* 0x818 Transmit Equalization Control */
+ u32 res_81c;
+ u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */
+ u8 res_824[0x840-0x824];
+ } lane[8]; /* Lane A, B, C, D, E, F, G, H */
+ u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */
+} serdes_corenet_t;
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
typedef struct serdes_corenet {
struct {
u32 rstctl; /* Reset Control Register */
@@ -2452,6 +2539,7 @@ typedef struct serdes_corenet {
} lane[24];
u32 res6[384];
} serdes_corenet_t;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
enum {
FSL_SRDS_B1_LANE_A = 0,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 12/28] powerpc/corenet2: Add SerDes for corenet2
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (9 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 11/28] powerpc/mpc85xx: Add RCW bits and registers for SerDes for corenet2 York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 13/28] powerpc/corenet2: fix mismatch DDR sync bit from RCW York Sun
` (15 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Create new files to handle 2nd generation Chassis as the registers are
organized differently.
- Add SerDes protocol parsing and detection
- Add support of 4 SerDes
- Add CPRI protocol in fsl_serdes.h
The Common Public Radio Interface (CPRI) is publicly available
specification that standardizes the protocol interface between the
radio equipment control (REC) and the radio equipment (RE) in wireless
basestations. This allows interoperability of equipment from different
vendors,and preserves the software investment made by wireless service
providers.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
---
arch/powerpc/cpu/mpc85xx/Makefile | 3 +-
arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 203 ++++++++++++++++++++++++
arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h | 26 +++
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h | 3 -
arch/powerpc/include/asm/config_mpc85xx.h | 4 +
arch/powerpc/include/asm/fsl_serdes.h | 42 +++++
arch/powerpc/include/asm/immap_85xx.h | 4 +
7 files changed, 281 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
create mode 100644 arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 33e93c8..f366c44 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -83,7 +83,8 @@ COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_CPM2) += serial_scc.o
-COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o
+COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o
+COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
# SoC specific SERDES support
COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
new file mode 100644
index 0000000..01dcdf6
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/fsl_law.h>
+#include <asm/errno.h>
+#include "fsl_corenet2_serdes.h"
+
+static u64 serdes1_prtcl_map;
+static u64 serdes2_prtcl_map;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+static u64 serdes3_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+static u64 serdes4_prtcl_map;
+#endif
+
+#ifdef DEBUG
+static const char *serdes_prtcl_str[] = {
+ [NONE] = "NA",
+ [PCIE1] = "PCIE1",
+ [PCIE2] = "PCIE2",
+ [PCIE3] = "PCIE3",
+ [PCIE4] = "PCIE4",
+ [SATA1] = "SATA1",
+ [SATA2] = "SATA2",
+ [SRIO1] = "SRIO1",
+ [SRIO2] = "SRIO2",
+ [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1",
+ [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2",
+ [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3",
+ [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4",
+ [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5",
+ [SGMII_FM1_DTSEC6] = "SGMII_FM1_DTSEC6",
+ [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1",
+ [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2",
+ [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3",
+ [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4",
+ [XAUI_FM1] = "XAUI_FM1",
+ [XAUI_FM2] = "XAUI_FM2",
+ [AURORA] = "DEBUG",
+ [CPRI1] = "CPRI1",
+ [CPRI2] = "CPRI2",
+ [CPRI3] = "CPRI3",
+ [CPRI4] = "CPRI4",
+ [CPRI5] = "CPRI5",
+ [CPRI6] = "CPRI6",
+ [CPRI7] = "CPRI7",
+ [CPRI8] = "CPRI8",
+ [XAUI_FM1_MAC9] = "XAUI_FM1_MAC9",
+ [XAUI_FM1_MAC10] = "XAUI_FM1_MAC10",
+ [XAUI_FM2_MAC9] = "XAUI_FM2_MAC9",
+ [XAUI_FM2_MAC10] = "XAUI_FM2_MAC10",
+ [HIGIG_FM1_MAC9] = "HiGig_FM1_MAC9",
+ [HIGIG_FM1_MAC10] = "HiGig_FM1_MAC10",
+ [HIGIG_FM2_MAC9] = "HiGig_FM2_MAC9",
+ [HIGIG_FM2_MAC10] = "HiGig_FM2_MAC10",
+ [QSGMII_FM1_A] = "QSGMII_FM1_A",
+ [QSGMII_FM1_B] = "QSGMII_FM1_B",
+ [QSGMII_FM2_A] = "QSGMII_FM2_A",
+ [QSGMII_FM2_B] = "QSGMII_FM2_B",
+ [XFI_FM1_MAC9] = "XFI_FM1_MAC9",
+ [XFI_FM1_MAC10] = "XFI_FM1_MAC10",
+ [XFI_FM2_MAC9] = "XFI_FM2_MAC9",
+ [XFI_FM2_MAC10] = "XFI_FM2_MAC10",
+ [INTERLAKEN] = "INTERLAKEN",
+};
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+ u64 ret = 0;
+
+ ret |= (1ULL << device) & serdes1_prtcl_map;
+ ret |= (1ULL << device) & serdes2_prtcl_map;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ ret |= (1ULL << device) & serdes3_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ ret |= (1ULL << device) & serdes4_prtcl_map;
+#endif
+
+ return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+ const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 cfg = in_be32(&gur->rcwsr[4]);
+ int i;
+
+ switch (sd) {
+ case FSL_SRDS_1:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ break;
+ case FSL_SRDS_2:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ break;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ case FSL_SRDS_3:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
+ break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ case FSL_SRDS_4:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
+ break;
+#endif
+ default:
+ printf("invalid SerDes%d\n", sd);
+ break;
+ }
+ /* Is serdes enabled at all? */
+ if (unlikely(cfg == 0))
+ return -ENODEV;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_get_prtcl(sd, cfg, i) == device)
+ return i;
+ }
+
+ return -ENODEV;
+}
+
+u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u64 serdes_prtcl_map = 0;
+ u32 cfg;
+ int lane;
+
+ cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
+ /* Is serdes enabled at all? */
+ if (!cfg) {
+ printf("SERDES%d is not enabled\n", sd + 1);
+ return 0;
+ }
+
+ cfg >>= sd_prctl_shift;
+ printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg);
+ if (!is_serdes_prtcl_valid(sd, cfg))
+ printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+ serdes_prtcl_map |= (1ULL << lane_prtcl);
+ }
+
+ return serdes_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+
+ serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR,
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT);
+ serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT);
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ serdes3_prtcl_map = serdes_init(FSL_SRDS_3,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS3_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ serdes4_prtcl_map = serdes_init(FSL_SRDS_4,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT);
+#endif
+
+}
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
new file mode 100644
index 0000000..2258f41
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_CORENET2_SERDES_H
+#define __FSL_CORENET2_SERDES_H
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_lane_enabled(int lane);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+#endif /* __FSL_CORENET2_SERDES_H */
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
index f261351..3c551e9 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
@@ -22,9 +22,6 @@
#ifndef __FSL_CORENET_SERDES_H
#define __FSL_CORENET_SERDES_H
-#define SRDS_MAX_LANES 18
-#define SRDS_MAX_BANK 3
-
enum srds_bank {
FSL_SRDS_BANK_1 = 0,
FSL_SRDS_BANK_2 = 1,
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index aa27741..392c06c 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -311,6 +311,7 @@
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_PPC_P2041) /* also supports P2040 */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
@@ -340,6 +341,7 @@
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#elif defined(CONFIG_PPC_P3041)
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
@@ -369,6 +371,7 @@
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#elif defined(CONFIG_PPC_P4080) /* also supports P4040 */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 8
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
#define CONFIG_SYS_FSL_NUM_LAWS 32
@@ -408,6 +411,7 @@
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
#elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 22525f1..6cd7379 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -37,11 +37,17 @@ enum srds_prtcl {
SGMII_FM1_DTSEC3,
SGMII_FM1_DTSEC4,
SGMII_FM1_DTSEC5,
+ SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC10,
SGMII_FM2_DTSEC1,
SGMII_FM2_DTSEC2,
SGMII_FM2_DTSEC3,
SGMII_FM2_DTSEC4,
SGMII_FM2_DTSEC5,
+ SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC10,
SGMII_TSEC1,
SGMII_TSEC2,
SGMII_TSEC3,
@@ -49,13 +55,49 @@ enum srds_prtcl {
XAUI_FM1,
XAUI_FM2,
AURORA,
+ CPRI1,
+ CPRI2,
+ CPRI3,
+ CPRI4,
+ CPRI5,
+ CPRI6,
+ CPRI7,
+ CPRI8,
+ XAUI_FM1_MAC9,
+ XAUI_FM1_MAC10,
+ XAUI_FM2_MAC9,
+ XAUI_FM2_MAC10,
+ HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10,
+ HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10,
+ QSGMII_FM1_A, /* A indicates MACs 1-4 */
+ QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */
+ QSGMII_FM2_A,
+ QSGMII_FM2_B,
+ XFI_FM1_MAC9,
+ XFI_FM1_MAC10,
+ XFI_FM2_MAC9,
+ XFI_FM2_MAC10,
+ INTERLAKEN,
+};
+
+enum srds {
+ FSL_SRDS_1 = 0,
+ FSL_SRDS_2 = 1,
+ FSL_SRDS_3 = 2,
+ FSL_SRDS_4 = 3,
};
int is_serdes_configured(enum srds_prtcl device);
void fsl_serdes_init(void);
#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+#else
int serdes_get_first_lane(enum srds_prtcl device);
+#endif
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
void serdes_reset_rx(enum srds_prtcl device);
#endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index c3ed6b1..30e449f 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2416,6 +2416,8 @@ typedef struct ccsr_gur {
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
#define MAX_SERDES 4
+#define SRDS_MAX_LANES 8
+#define SRDS_MAX_BANK 2
typedef struct serdes_corenet {
struct {
u32 rstctl; /* Reset Control Register */
@@ -2482,6 +2484,8 @@ typedef struct serdes_corenet {
#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#define SRDS_MAX_LANES 18
+#define SRDS_MAX_BANK 3
typedef struct serdes_corenet {
struct {
u32 rstctl; /* Reset Control Register */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 13/28] powerpc/corenet2: fix mismatch DDR sync bit from RCW
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (10 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 12/28] powerpc/corenet2: Add " York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 14/28] board/freescale/common: VSC3316/VSC3308 initialization code York Sun
` (14 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Corenet 2nd generation Chassis doesn't have ddr_sync bit in RCW. Only
async mode is supported.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/cpu.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 11b83d2..95f435e 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -60,7 +60,8 @@ int checkcpu (void)
uint major, minor;
struct cpu_type *cpu;
char buf1[32], buf2[32];
-#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
+#if defined(CONFIG_DDR_CLK_FREQ) || \
+ (defined(CONFIG_FSL_CORENET) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2))
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif /* CONFIG_FSL_CORENET */
#ifdef CONFIG_DDR_CLK_FREQ
@@ -68,8 +69,13 @@ int checkcpu (void)
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
#else
#ifdef CONFIG_FSL_CORENET
- u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
+ u32 ddr_sync ;
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ ddr_sync = 0; /* only async mode is supported */
+#else
+ ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
#else
u32 ddr_ratio = 0;
#endif /* CONFIG_FSL_CORENET */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 14/28] board/freescale/common: VSC3316/VSC3308 initialization code
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (11 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 13/28] powerpc/corenet2: fix mismatch DDR sync bit from RCW York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 15/28] powerpc/mpc85xx: Add T4 device definitions York Sun
` (13 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
From: Shaveta Leekha <shaveta@freescale.com>
Add code for configuring VSC3316/3308 crosspoint switches
Add README to understand the APIs
- VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch
capable of data rates upto 11.5Gbps. VSC3316 has 16 input and 16
output ports whereas VSC3308 has 8 input and 8 output ports.
Programming of these devices are performed by two-wire or four-wire
serial interface.
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
---
board/freescale/common/Makefile | 1 +
board/freescale/common/vsc3316_3308.c | 184 +++++++++++++++++++++++++++++++++
board/freescale/common/vsc3316_3308.h | 34 ++++++
doc/README.VSC3316-3308 | 43 ++++++++
4 files changed, 262 insertions(+)
create mode 100644 board/freescale/common/vsc3316_3308.c
create mode 100644 board/freescale/common/vsc3316_3308.h
create mode 100644 doc/README.VSC3316-3308
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 54cb098..36f7c4f 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -53,6 +53,7 @@ COBJS-$(CONFIG_P2020DS) += ics307_clk.o
COBJS-$(CONFIG_P3041DS) += ics307_clk.o
COBJS-$(CONFIG_P4080DS) += ics307_clk.o
COBJS-$(CONFIG_P5020DS) += ics307_clk.o
+COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o
# deal with common files for P-series corenet based devices
SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o
diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c
new file mode 100644
index 0000000..7868565
--- /dev/null
+++ b/board/freescale/common/vsc3316_3308.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "vsc3316_3308.h"
+
+#define REVISION_ID_REG 0x7E
+#define INTERFACE_MODE_REG 0x79
+#define CURRENT_PAGE_REGISTER 0x7F
+#define CONNECTION_CONFIG_PAGE 0x00
+#define INPUT_STATE_REG 0x13
+#define GLOBAL_INPUT_ISE1 0x51
+#define GLOBAL_INPUT_ISE2 0x52
+#define GLOBAL_INPUT_LOS 0x55
+#define GLOBAL_CORE_CNTRL 0x5D
+#define OUTPUT_MODE_PAGE 0x23
+#define CORE_CONTROL_PAGE 0x25
+#define CORE_CONFIG_REG 0x75
+
+int vsc_if_enable(unsigned int vsc_addr)
+{
+ u8 data;
+
+ debug("VSC:Configuring VSC at I2C address 0x%2x"
+ " for 2-wire interface\n", vsc_addr);
+
+ /* enable 2-wire Serial InterFace (I2C) */
+ data = 0x02;
+ return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1);
+}
+
+int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con)
+{
+ unsigned int i;
+ u8 rev_id = 0;
+ int ret;
+
+ debug("VSC:Initializing VSC3316 at I2C address 0x%2x"
+ " for Tx\n", vsc_addr);
+
+ ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
+ if (ret < 0) {
+ printf("VSC:0x%x could not read REV_ID from device.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ if (rev_id != 0xab) {
+ printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
+ vsc_addr);
+ return -ENODEV;
+ }
+
+ ret = vsc_if_enable(vsc_addr);
+ if (ret) {
+ printf("VSC:0x%x could not configured for 2-wire I/F.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ /* config connections - page 0x00 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
+
+ /* Making crosspoint connections, by connecting required
+ * input to output */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
+
+ /* input state - page 0x13 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
+ /* Configuring the required input of the switch */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][0], 0x80);
+
+ /* Setting Global Input LOS threshold value */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
+
+ /* config output mode - page 0x23 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
+ /* Turn ON the Output driver correspond to required output*/
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], 0);
+
+ /* configure global core control register, Turn on Global core power */
+ i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
+
+ vsc_wp_config(vsc_addr);
+
+ return 0;
+}
+
+int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con)
+{
+ unsigned int i;
+ u8 rev_id = 0;
+ int ret;
+
+ debug("VSC:Initializing VSC3308 at I2C address 0x%x"
+ " for Tx\n", vsc_addr);
+
+ ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
+ if (ret < 0) {
+ printf("VSC:0x%x could not read REV_ID from device.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ if (rev_id != 0xab) {
+ printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
+ vsc_addr);
+ return -ENODEV;
+ }
+
+ ret = vsc_if_enable(vsc_addr);
+ if (ret) {
+ printf("VSC:0x%x could not configured for 2-wire I/F.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ /* config connections - page 0x00 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
+
+ /* Making crosspoint connections, by connecting required
+ * input to output */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
+
+ /*Configure Global Input ISE and gain */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12);
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12);
+
+ /* input state - page 0x13 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
+ /* Turning ON the required input of the switch */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][0], 0);
+
+ /* Setting Global Input LOS threshold value */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
+
+ /* config output mode - page 0x23 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
+ /* Turn ON the Output driver correspond to required output*/
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], 0);
+
+ /* configure global core control register, Turn on Global core power */
+ i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
+
+ vsc_wp_config(vsc_addr);
+
+ return 0;
+}
+
+void vsc_wp_config(unsigned int vsc_addr)
+{
+ debug("VSC:Configuring VSC@address:0x%x for WP\n", vsc_addr);
+
+ /* For new crosspoint configuration to occur, WP bit of
+ * CORE_CONFIG_REG should be set 1 and then reset to 0 */
+ i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01);
+ i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0);
+}
diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h
new file mode 100644
index 0000000..effd66d
--- /dev/null
+++ b/board/freescale/common/vsc3316_3308.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VSC_CROSSBAR_H_
+#define __VSC_CROSSBAR_H 1_
+
+#include <common.h>
+#include <i2c.h>
+#include <errno.h>
+
+int vsc_if_enable(unsigned int vsc_addr);
+int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con);
+int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con);
+void vsc_wp_config(unsigned int vsc_addr);
+
+#endif /* __VSC_CROSSBAR_H_ */
diff --git a/doc/README.VSC3316-3308 b/doc/README.VSC3316-3308
new file mode 100644
index 0000000..925663b
--- /dev/null
+++ b/doc/README.VSC3316-3308
@@ -0,0 +1,43 @@
+This file contains API information of the initialization code written for
+Vitesse cross-point devices, VSC3316 and VSC3308 for board B4860QDS
+
+Author: Shaveta Leekha <shaveta@freescale.com>
+
+About Device:
+=============
+VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps.
+
+VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface.
+
+Initialization:
+===============
+On reset, VSC devices are in low-power state with all inputs, outputs and connections in an off state.
+First thing required is to program it to interface with either two-wire or four-wire interface.
+In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface. Also for crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register).
+
+API Overview:
+=============
+
+ vsc_if_enable(u8 vsc_addr):
+ --------------------------
+ This API programs VSC to interface with either two-wire or four-wire interface. In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface.
+ Parameters:
+ vsc_addr - Address of the VSC device on board.
+
+
+ vsc3316_config(u8 vsc_addr, int con_arr[][2], u8 num_con):
+ ---------------------------------------------------------
+ This API configures the VSC3316 device for required connections. Connection through the VSC device requires the inputs and outputs to be properly configured.
+ Connection registers are on page 00. It Configures the selected input and output correctly and join them to make a connection. It also program Input state register, Global input ISE, Global input LOS, Global core control, Output mode register and core control registers etc.
+ vsc3308_config(u8 vsc_addr, int con_arr[][2], u8 num_con) does the essential configurations for VSC3308.
+
+ Parameters:
+ vsc_addr - Address of the VSC device on board.
+ con_arr - connection array
+ num_con - number of connections to be configured
+
+ vsc_wp_config(u8 vsc_addr):
+ --------------------------
+ For crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register), which is done by this API.
+ Parameters:
+ vsc_addr - Address of the VSC device on board.
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 15/28] powerpc/mpc85xx: Add T4 device definitions
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (12 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 14/28] board/freescale/common: VSC3316/VSC3308 initialization code York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 16/28] powerpc/mpc85xx: Add T4240 SoC York Sun
` (12 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
From: Andy Fleming <afleming@freescale.com>
The T4 has added devices to previous corenet implementations:
* SEC has 3 more DECO units
* New PMAN device
* New DCE device
This doesn't add full support for the new devices. Just some
preliminary support.
Move PMAN LIODN to upper half of register
Despite having only one LIODN, the PMAN LIODN is stored in the
upper half of the register. Re-use the 2-LIODN code and just
set the LIODN as if the second one is 0. This results in the
actual LIODN being written to the upper half of the register.
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
arch/powerpc/include/asm/fsl_liodn.h | 6 +++++
arch/powerpc/include/asm/fsl_portals.h | 3 +++
arch/powerpc/include/asm/immap_85xx.h | 41 ++++++++++++++++++++++++++++++--
3 files changed, 48 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h
index a9973b8..fbe3466 100644
--- a/arch/powerpc/include/asm/fsl_liodn.h
+++ b/arch/powerpc/include/asm/fsl_liodn.h
@@ -118,6 +118,12 @@ extern void fdt_fixup_liodn(void *blob);
CONFIG_SYS_FSL_CORENET_PME_OFFSET, \
CONFIG_SYS_FSL_CORENET_PME_OFFSET)
+#define SET_PMAN_LIODN(num, liodn) \
+ SET_LIODN_ENTRY_2("fsl,pman", liodn, 0, \
+ offsetof(struct ccsr_pman, ppa1) + \
+ CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET, \
+ CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET)
+
/* -1 from portID due to how immap has the registers */
#define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \
CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \
diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h
index 9a764d2..b75f5b9 100644
--- a/arch/powerpc/include/asm/fsl_portals.h
+++ b/arch/powerpc/include/asm/fsl_portals.h
@@ -39,6 +39,9 @@ enum fsl_dpaa_dev {
#ifdef CONFIG_SYS_DPAA_RMAN
FSL_HW_PORTAL_RMAN,
#endif
+#ifdef CONFIG_SYS_DPAA_DCE
+ FSL_HW_PORTAL_DCE,
+#endif
};
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 30e449f..2cdbf7f 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2586,8 +2586,8 @@ typedef struct ccsr_sec {
struct {
u32 ms; /* DECO LIODN Register, MS */
u32 ls; /* DECO LIODN Register, LS */
- } decoliodnr[5];
- u8 res4[0x58];
+ } decoliodnr[8];
+ u8 res4[0x40];
u32 dar; /* DECO Avail Register */
u32 drr; /* DECO Reset Register */
u8 res5[0xe78];
@@ -2732,8 +2732,41 @@ struct ccsr_rman {
};
#endif
+#ifdef CONFIG_SYS_PMAN
+struct ccsr_pman {
+ u8 res_00[0x40];
+ u32 poes1; /* PMAN Operation Error Status Register 1 */
+ u32 poes2; /* PMAN Operation Error Status Register 2 */
+ u32 poeah; /* PMAN Operation Error Address High */
+ u32 poeal; /* PMAN Operation Error Address Low */
+ u8 res_50[0x50];
+ u32 pr1; /* PMAN Revision Register 1 */
+ u32 pr2; /* PMAN Revision Register 2 */
+ u8 res_a8[0x8];
+ u32 pcap; /* PMAN Capabilities Register */
+ u8 res_b4[0xc];
+ u32 pc1; /* PMAN Control Register 1 */
+ u32 pc2; /* PMAN Control Register 2 */
+ u32 pc3; /* PMAN Control Register 3 */
+ u32 pc4; /* PMAN Control Register 4 */
+ u32 pc5; /* PMAN Control Register 5 */
+ u32 pc6; /* PMAN Control Register 6 */
+ u8 res_d8[0x8];
+ u32 ppa1; /* PMAN Prefetch Attributes Register 1 */
+ u32 ppa2; /* PMAN Prefetch Attributes Register 2 */
+ u8 res_e8[0x8];
+ u32 pics; /* PMAN Interrupt Control and Status */
+ u8 res_f4[0xf0c];
+};
+#endif
+
#ifdef CONFIG_FSL_CORENET
#define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000
+#ifdef CONFIG_SYS_PMAN
+#define CONFIG_SYS_FSL_CORENET_PMAN1_OFFSET 0x4000
+#define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET 0x5000
+#define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET 0x6000
+#endif
#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000
#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000
#define CONFIG_SYS_MPC85xx_DDR3_OFFSET 0xA000
@@ -2772,7 +2805,9 @@ struct ccsr_rman {
#define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET 0x48a000
#define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET 0x48b000
#define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET 0x48c000
+#define CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET 0x48d000
#define CONFIG_SYS_FSL_FM1_RX0_10G_OFFSET 0x490000
+#define CONFIG_SYS_FSL_FM1_RX1_10G_OFFSET 0x491000
#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0x4e0000
#define CONFIG_SYS_FSL_FM2_OFFSET 0x500000
#define CONFIG_SYS_FSL_FM2_RX0_1G_OFFSET 0x588000
@@ -2780,7 +2815,9 @@ struct ccsr_rman {
#define CONFIG_SYS_FSL_FM2_RX2_1G_OFFSET 0x58a000
#define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET 0x58b000
#define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET 0x58c000
+#define CONFIG_SYS_FSL_FM2_RX5_1G_OFFSET 0x58d000
#define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET 0x590000
+#define CONFIG_SYS_FSL_FM2_RX1_10G_OFFSET 0x591000
#define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET 0xC20000
#else
#define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 16/28] powerpc/mpc85xx: Add T4240 SoC
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (13 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 15/28] powerpc/mpc85xx: Add T4 device definitions York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 17/28] powerpc/mpc85xx: Add B4860 and variant SoCs York Sun
` (11 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Add support for Freescale T4240 SoC. Feature of T4240 are
(incomplete list):
12 dual-threaded e6500 cores built on Power Architecture? technology
Arranged as clusters of four cores sharing a 2 MB L2 cache.
Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture
v2.06-compliant)
Three levels of instruction: user, supervisor, and hypervisor
1.5 MB CoreNet Platform Cache (CPC)
Hierarchical interconnect fabric
CoreNet fabric supporting coherent and non-coherent transactions with
prioritization and bandwidth allocation amongst CoreNet end-points
1.6 Tbps coherent read bandwidth
Queue Manager (QMan) fabric supporting packet-level queue management and
quality of service scheduling
Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
support
Memory prefetch engine (PMan)
Data Path Acceleration Architecture (DPAA) incorporating acceleration for
the following functions:
Packet parsing, classification, and distribution (Frame Manager 1.1)
Queue management for scheduling, packet sequencing, and congestion
management (Queue Manager 1.1)
Hardware buffer management for buffer allocation and de-allocation
(BMan 1.1)
Cryptography acceleration (SEC 5.0) at up to 40 Gbps
RegEx Pattern Matching Acceleration (PME 2.1) at up to 10 Gbps
Decompression/Compression Acceleration (DCE 1.0) at up to 20 Gbps
DPAA chip-to-chip interconnect via RapidIO Message Manager (RMAN 1.0)
32 SerDes lanes at up to 10.3125 GHz
Ethernet interfaces
Up to four 10 Gbps Ethernet MACs
Up to sixteen 1 Gbps Ethernet MACs
Maximum configuration of 4 x 10 GE + 8 x 1 GE
High-speed peripheral interfaces
Four PCI Express 2.0/3.0 controllers
Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz with
Type 11 messaging and Type 9 data streaming support
Interlaken look-aside interface for serial TCAM connection
Additional peripheral interfaces
Two serial ATA (SATA 2.0) controllers
Two high-speed USB 2.0 controllers with integrated PHY
Enhanced secure digital host controller (SD/MMC/eMMC)
Enhanced serial peripheral interface (eSPI)
Four I2C controllers
Four 2-pin or two 4-pin UARTs
Integrated Flash controller supporting NAND and NOR flash
Two eight-channel DMA engines
Support for hardware virtualization and partitioning enforcement
QorIQ Platform's Trust Architecture 1.1
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
---
arch/powerpc/cpu/mpc85xx/Makefile | 3 +
arch/powerpc/cpu/mpc85xx/t4240_ids.c | 203 ++++++++++++++++++++++++
arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 237 +++++++++++++++++++++++++++++
arch/powerpc/cpu/mpc8xxx/cpu.c | 2 +
arch/powerpc/cpu/mpc8xxx/srio.c | 21 ++-
arch/powerpc/include/asm/config_mpc85xx.h | 28 ++++
arch/powerpc/include/asm/immap_85xx.h | 88 ++++++++++-
arch/powerpc/include/asm/processor.h | 2 +
drivers/net/fm/Makefile | 1 +
drivers/net/fm/init.c | 18 +++
drivers/net/fm/t4240.c | 128 ++++++++++++++++
drivers/pci/fsl_pci_init.c | 25 ++-
include/fm_eth.h | 8 +
13 files changed, 752 insertions(+), 12 deletions(-)
create mode 100644 arch/powerpc/cpu/mpc85xx/t4240_ids.c
create mode 100644 arch/powerpc/cpu/mpc85xx/t4240_serdes.c
create mode 100644 drivers/net/fm/t4240.c
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index f366c44..bde26b0 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -67,6 +67,7 @@ COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o
COBJS-$(CONFIG_BSC9131) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o
COBJS-$(CONFIG_CPM2) += ether_fcc.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
@@ -80,6 +81,7 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o
COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
+COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_CPM2) += serial_scc.o
@@ -111,6 +113,7 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o
COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
+COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
COBJS = $(COBJS-y)
COBJS += cpu.o
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
new file mode 100644
index 0000000..a8f16b1
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 4),
+ SET_QP_INFO(10, 36, 1, 4),
+ SET_QP_INFO(11, 37, 1, 5),
+ SET_QP_INFO(12, 38, 1, 5),
+ SET_QP_INFO(13, 39, 1, 6),
+ SET_QP_INFO(14, 40, 1, 6),
+ SET_QP_INFO(15, 41, 1, 7),
+ SET_QP_INFO(16, 42, 1, 7),
+ SET_QP_INFO(17, 43, 1, 8),
+ SET_QP_INFO(18, 44, 1, 8),
+ SET_QP_INFO(19, 45, 1, 9),
+ SET_QP_INFO(20, 46, 1, 9),
+ SET_QP_INFO(21, 47, 1, 10),
+ SET_QP_INFO(22, 48, 1, 10),
+ SET_QP_INFO(23, 49, 1, 11),
+ SET_QP_INFO(24, 50, 1, 11),
+ SET_QP_INFO(65, 89, 1, 0),
+ SET_QP_INFO(66, 90, 1, 0),
+ SET_QP_INFO(67, 91, 1, 1),
+ SET_QP_INFO(68, 92, 1, 1),
+ SET_QP_INFO(69, 93, 1, 2),
+ SET_QP_INFO(70, 94, 1, 2),
+ SET_QP_INFO(71, 95, 1, 3),
+ SET_QP_INFO(72, 96, 1, 3),
+ SET_QP_INFO(73, 97, 1, 4),
+ SET_QP_INFO(74, 98, 1, 4),
+ SET_QP_INFO(75, 99, 1, 5),
+ SET_QP_INFO(76, 100, 1, 5),
+ SET_QP_INFO(77, 101, 1, 6),
+ SET_QP_INFO(78, 102, 1, 6),
+ SET_QP_INFO(79, 103, 1, 7),
+ SET_QP_INFO(80, 104, 1, 7),
+ SET_QP_INFO(81, 105, 1, 8),
+ SET_QP_INFO(82, 106, 1, 8),
+ SET_QP_INFO(83, 107, 1, 9),
+ SET_QP_INFO(84, 108, 1, 9),
+ SET_QP_INFO(85, 109, 1, 10),
+ SET_QP_INFO(86, 110, 1, 10),
+ SET_QP_INFO(87, 111, 1, 11),
+ SET_QP_INFO(88, 112, 1, 11),
+ SET_QP_INFO(25, 51, 1, 0),
+ SET_QP_INFO(26, 52, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_1(1, 307),
+ SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_PME_LIODN(117),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 554),
+
+ SET_SATA_LIODN(1, 555),
+ SET_SATA_LIODN(2, 556),
+
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+#ifdef CONFIG_SYS_PMAN
+ SET_PMAN_LIODN(1, 513),
+ SET_PMAN_LIODN(2, 514),
+ SET_PMAN_LIODN(3, 515),
+#endif
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(2, 0, 88),
+ SET_FMAN_RX_1G_LIODN(2, 1, 89),
+ SET_FMAN_RX_1G_LIODN(2, 2, 90),
+ SET_FMAN_RX_1G_LIODN(2, 3, 91),
+ SET_FMAN_RX_1G_LIODN(2, 4, 92),
+ SET_FMAN_RX_1G_LIODN(2, 5, 93),
+ SET_FMAN_RX_10G_LIODN(2, 0, 94),
+ SET_FMAN_RX_10G_LIODN(2, 1, 95),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+ SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+ SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+ SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+ SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+ SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+ SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 678),
+ SET_RMAN_LIODN(1, 679),
+ SET_RMAN_LIODN(2, 680),
+ SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+#ifdef CONFIG_SYS_DPAA_DCE
+ [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694),
+#endif
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(1069),
+#endif
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+ [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
new file mode 100644
index 0000000..102defa
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+ u32 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}},
+ {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}},
+ {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}},
+ {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}},
+ {38, {NONE, NONE, QSGMII_FM1_B, NONE,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {40, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {46, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {48, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC10, XAUI_FM2_MAC10,
+ XAUI_FM2_MAC10, XAUI_FM2_MAC10}},
+ {2, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}},
+ {4, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}},
+ {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {14, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {23, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {38, {NONE, NONE, QSGMII_FM2_B, NONE,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {56, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM2_MAC10, XFI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {57, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM2_MAC10, XFI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {}
+};
+static struct serdes_config serdes3_cfg_tbl[] = {
+ /* SerDes 3 */
+ {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}},
+ {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}},
+ {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}},
+ {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}},
+ {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
+ {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
+ {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ PCIE2, PCIE2, PCIE2, PCIE2}},
+ {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ PCIE2, PCIE2, PCIE2, PCIE2}},
+ {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {}
+};
+static struct serdes_config serdes4_cfg_tbl[] = {
+ /* SerDes 4 */
+ {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}},
+ {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}},
+ {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
+ {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
+ {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}},
+ {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}},
+ {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
+ {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
+ {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
+ {}
+};
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+ serdes2_cfg_tbl,
+ serdes3_cfg_tbl,
+ serdes4_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 78a8f92..45ca487 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -75,6 +75,8 @@ struct cpu_type cpu_type_list [] = {
CPU_TYPE_ENTRY(P5020, P5020, 2),
CPU_TYPE_ENTRY(BSC9130, 9130, 1),
CPU_TYPE_ENTRY(BSC9131, 9131, 1),
+ CPU_TYPE_ENTRY(T4240, T4240, 0),
+ CPU_TYPE_ENTRY(T4120, T4120, 0),
#elif defined(CONFIG_MPC86xx)
CPU_TYPE_ENTRY(8610, 8610, 1),
CPU_TYPE_ENTRY(8641, 8641, 2),
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
index 0cb65b3..a7e95c8 100644
--- a/arch/powerpc/cpu/mpc8xxx/srio.c
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -33,8 +33,13 @@
#define SRIO_LCSBA1CSR 0x60000000
#if defined(CONFIG_FSL_CORENET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR3_SRIO1
+ #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR3_SRIO2
+#else
#define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1
#define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2
+#endif
#define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU
#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
#elif defined(CONFIG_MPC85xx)
@@ -56,7 +61,13 @@ void srio_init(void)
{
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
int srio1_used = 0, srio2_used = 0;
+ u32 *devdisr;
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ devdisr = &gur->devdisr3;
+#else
+ devdisr = &gur->devdisr;
+#endif
if (is_serdes_configured(SRIO1)) {
set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS,
law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE),
@@ -82,16 +93,16 @@ void srio_init(void)
#ifdef CONFIG_FSL_CORENET
/* On FSL_CORENET devices we can disable individual ports */
if (!srio1_used)
- setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1);
+ setbits_be32(devdisr, _DEVDISR_SRIO1);
if (!srio2_used)
- setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2);
+ setbits_be32(devdisr, _DEVDISR_SRIO2);
#endif
/* neither port is used - disable everything */
if (!srio1_used && !srio2_used) {
- setbits_be32(&gur->devdisr, _DEVDISR_SRIO1);
- setbits_be32(&gur->devdisr, _DEVDISR_SRIO2);
- setbits_be32(&gur->devdisr, _DEVDISR_RMU);
+ setbits_be32(devdisr, _DEVDISR_SRIO1);
+ setbits_be32(devdisr, _DEVDISR_SRIO2);
+ setbits_be32(devdisr, _DEVDISR_RMU);
}
}
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 392c06c..0a04e6f 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -449,6 +449,34 @@
#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#elif defined(CONFIG_PPC_T4240)
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#define CONFIG_MAX_CPUS 12
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 5
+#define CONFIG_SYS_FSL_NUM_LAWS 32
+#define CONFIG_SYS_FSL_SRDS_3
+#define CONFIG_SYS_FSL_SRDS_4
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 2
+#define CONFIG_SYS_NUM_FM1_DTSEC 8
+#define CONFIG_SYS_NUM_FM1_10GEC 2
+#define CONFIG_SYS_NUM_FM2_DTSEC 8
+#define CONFIG_SYS_NUM_FM2_10GEC 2
+#define CONFIG_NUM_DDR_CONTROLLERS 3
+#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0"
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+
#else
#error Processor type not defined for this platform
#endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 2cdbf7f..a1c04e0 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1687,6 +1687,72 @@ typedef struct ccsr_gur {
u32 alt_pmuxcr; /* Alt function signal multiplex control */
u8 res6[12];
u32 devdisr; /* Device disable control */
+ u32 devdisr2; /* Device disable control 2 */
+ u32 devdisr3; /* Device disable control 3 */
+ u32 devdisr4; /* Device disable control 4 */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ u32 devdisr5; /* Device disable control 5 */
+#define FSL_CORENET_DEVDISR_PBL 0x80000000
+#define FSL_CORENET_DEVDISR_PMAN 0x40000000
+#define FSL_CORENET_DEVDISR_ESDHC 0x20000000
+#define FSL_CORENET_DEVDISR_DMA1 0x00800000
+#define FSL_CORENET_DEVDISR_DMA2 0x00400000
+#define FSL_CORENET_DEVDISR_USB1 0x00080000
+#define FSL_CORENET_DEVDISR_USB2 0x00040000
+#define FSL_CORENET_DEVDISR_SATA1 0x00008000
+#define FSL_CORENET_DEVDISR_SATA2 0x00004000
+#define FSL_CORENET_DEVDISR_PME 0x00000800
+#define FSL_CORENET_DEVDISR_SEC 0x00000200
+#define FSL_CORENET_DEVDISR_RMU 0x00000080
+#define FSL_CORENET_DEVDISR_DCE 0x00000040
+#define FSL_CORENET_DEVDISR2_DTSEC1_1 0x80000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_2 0x40000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_3 0x20000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_4 0x10000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_5 0x08000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_6 0x04000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_9 0x00800000
+#define FSL_CORENET_DEVDISR2_DTSEC1_10 0x00400000
+#define FSL_CORENET_DEVDISR2_10GEC1_1 0x00800000
+#define FSL_CORENET_DEVDISR2_10GEC1_2 0x00400000
+#define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00080000
+#define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00040000
+#define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00020000
+#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00010000
+#define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00008000
+#define FSL_CORENET_DEVDISR2_DTSEC2_6 0x00004000
+#define FSL_CORENET_DEVDISR2_DTSEC2_9 0x00000800
+#define FSL_CORENET_DEVDISR2_DTSEC2_10 0x00000400
+#define FSL_CORENET_DEVDISR2_10GEC2_1 0x00000800
+#define FSL_CORENET_DEVDISR2_10GEC2_2 0x00000400
+#define FSL_CORENET_DEVDISR2_FM1 0x00000080
+#define FSL_CORENET_DEVDISR2_FM2 0x00000040
+#define FSL_CORENET_DEVDISR3_PCIE1 0x80000000
+#define FSL_CORENET_DEVDISR3_PCIE2 0x40000000
+#define FSL_CORENET_DEVDISR3_PCIE3 0x20000000
+#define FSL_CORENET_DEVDISR3_PCIE4 0x10000000
+#define FSL_CORENET_DEVDISR3_SRIO1 0x08000000
+#define FSL_CORENET_DEVDISR3_SRIO2 0x04000000
+#define FSL_CORENET_DEVDISR3_QMAN 0x00080000
+#define FSL_CORENET_DEVDISR3_BMAN 0x00040000
+#define FSL_CORENET_DEVDISR3_LA1 0x00008000
+#define FSL_CORENET_DEVDISR4_I2C1 0x80000000
+#define FSL_CORENET_DEVDISR4_I2C2 0x40000000
+#define FSL_CORENET_DEVDISR4_DUART1 0x20000000
+#define FSL_CORENET_DEVDISR4_DUART2 0x10000000
+#define FSL_CORENET_DEVDISR4_ESPI 0x08000000
+#define FSL_CORENET_DEVDISR5_DDR1 0x80000000
+#define FSL_CORENET_DEVDISR5_DDR2 0x40000000
+#define FSL_CORENET_DEVDISR5_DDR3 0x20000000
+#define FSL_CORENET_DEVDISR5_CPC1 0x08000000
+#define FSL_CORENET_DEVDISR5_CPC2 0x04000000
+#define FSL_CORENET_DEVDISR5_CPC3 0x02000000
+#define FSL_CORENET_DEVDISR5_IFC 0x00800000
+#define FSL_CORENET_DEVDISR5_GPIO 0x00400000
+#define FSL_CORENET_DEVDISR5_DBG 0x00200000
+#define FSL_CORENET_DEVDISR5_NAL 0x00100000
+#define FSL_CORENET_NUM_DEVDISR 5
+#else
#define FSL_CORENET_DEVDISR_PCIE1 0x80000000
#define FSL_CORENET_DEVDISR_PCIE2 0x40000000
#define FSL_CORENET_DEVDISR_PCIE3 0x20000000
@@ -1712,7 +1778,6 @@ typedef struct ccsr_gur {
#define FSL_CORENET_DEVDISR_I2C2 0x00000010
#define FSL_CORENET_DEVDISR_DUART1 0x00000002
#define FSL_CORENET_DEVDISR_DUART2 0x00000001
- u32 devdisr2; /* Device disable control 2 */
#define FSL_CORENET_DEVDISR2_PME 0x80000000
#define FSL_CORENET_DEVDISR2_SEC 0x40000000
#define FSL_CORENET_DEVDISR2_QMBM 0x08000000
@@ -1731,8 +1796,8 @@ typedef struct ccsr_gur {
#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00001000
#define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00000800
#define FSL_CORENET_NUM_DEVDISR 2
- u8 res7[8];
u32 powmgtcsr; /* Power management status & control */
+#endif
u8 res8[12];
u32 coredisru; /* uppper portion for support of 64 cores */
u32 coredisrl; /* lower portion for support of 64 cores */
@@ -1759,6 +1824,7 @@ typedef struct ccsr_gur {
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16
#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f
+#if defined(CONFIG_PPC_T4240)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000
@@ -1767,6 +1833,7 @@ typedef struct ccsr_gur {
#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT 11
#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL 0x000000f8
#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT 3
+#endif
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL1 0x00200000
@@ -1810,6 +1877,16 @@ typedef struct ccsr_gur {
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII 0x00100000
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE 0x00180000
#endif
+
+#if defined(CONFIG_PPC_T4240)
+#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */
+#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000
+#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII 0x08000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000
+#endif
u8 res18[192];
u32 scratchrw[4]; /* Scratch Read/Write */
u8 res19[240];
@@ -2783,10 +2860,17 @@ struct ccsr_pman {
#define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x124000
#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000
#define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET 0x1e0000
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x240000
+#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x250000
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x260000
+#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x270000
+#else
#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x200000
#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x201000
#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x202000
#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x203000
+#endif
#define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000
#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000
#define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 36695e2..0841749 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1095,6 +1095,8 @@
#define SVR_P4080 0x820000
#define SVR_P5010 0x822100
#define SVR_P5020 0x822000
+#define SVR_T4240 0x824000
+#define SVR_T4120 0x824001
#define SVR_8610 0x80A000
#define SVR_8641 0x809000
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index cc57354..73f64ad 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -40,6 +40,7 @@ COBJS-$(CONFIG_PPC_P2041) += p5020.o
COBJS-$(CONFIG_PPC_P3041) += p5020.o
COBJS-$(CONFIG_PPC_P4080) += p4080.o
COBJS-$(CONFIG_PPC_P5020) += p5020.o
+COBJS-$(CONFIG_PPC_T4240) += t4240.o
endif
COBJS := $(COBJS-y)
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index 736b8b9..ae389b8 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -38,6 +38,15 @@ struct fm_eth_info fm_info[] = {
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 5)
FM_DTSEC_INFO_INITIALIZER(1, 5),
#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 6)
+ FM_DTSEC_INFO_INITIALIZER(1, 6),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 7)
+ FM_DTSEC_INFO_INITIALIZER(1, 9),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 8)
+ FM_DTSEC_INFO_INITIALIZER(1, 10),
+#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 1)
FM_DTSEC_INFO_INITIALIZER(2, 1),
#endif
@@ -53,6 +62,15 @@ struct fm_eth_info fm_info[] = {
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 5)
FM_DTSEC_INFO_INITIALIZER(2, 5),
#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 6)
+ FM_DTSEC_INFO_INITIALIZER(2, 6),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 7)
+ FM_DTSEC_INFO_INITIALIZER(2, 9),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 8)
+ FM_DTSEC_INFO_INITIALIZER(2, 10),
+#endif
#if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
FM_TGEC_INFO_INITIALIZER(1, 1),
#endif
diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c
new file mode 100644
index 0000000..48c530c
--- /dev/null
+++ b/drivers/net/fm/t4240.c
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+ [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5,
+ [FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6,
+ [FM1_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC1_9,
+ [FM1_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC1_10,
+ [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1,
+ [FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2,
+ [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
+ [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
+ [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
+ [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
+ [FM2_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC2_5,
+ [FM2_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC2_6,
+ [FM2_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC2_9,
+ [FM2_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC2_10,
+ [FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2_1,
+ [FM2_10GEC2] = FSL_CORENET_DEVDISR2_10GEC2_2,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC1 || port == FM1_10GEC2)
+ && (is_serdes_configured(XAUI_FM1)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if ((port == FM2_10GEC1 || port == FM2_10GEC2)
+ && (is_serdes_configured(XAUI_FM2)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */
+#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000
+#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII 0x08000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000
+ /* handle RGMII first */
+ if ((port == FM2_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
+ FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM1_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+ FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM2_DTSEC6) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+ FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ case FM1_DTSEC3:
+ case FM1_DTSEC4:
+ case FM1_DTSEC5:
+ case FM1_DTSEC6:
+ case FM1_DTSEC9:
+ case FM1_DTSEC10:
+ if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ case FM2_DTSEC1:
+ case FM2_DTSEC2:
+ case FM2_DTSEC3:
+ case FM2_DTSEC4:
+ case FM2_DTSEC5:
+ case FM2_DTSEC6:
+ case FM2_DTSEC9:
+ case FM2_DTSEC10:
+ if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 1cf6158..a8d41d0 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -664,10 +664,17 @@ int fsl_configure_pcie(struct fsl_pci_info *info,
}
#if defined(CONFIG_FSL_CORENET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1
+ #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2
+ #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3
+ #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4
+#else
#define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1
#define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2
#define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3
#define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4
+#endif
#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
#elif defined(CONFIG_MPC85xx)
#define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE
@@ -747,34 +754,42 @@ int fsl_pcie_init_board(int busno)
{
struct fsl_pci_info pci_info;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
- u32 devdisr = in_be32(&gur->devdisr);
+ u32 devdisr;
+ u32 *addr;
+
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ addr = &gur->devdisr3;
+#else
+ addr = &gur->devdisr;
+#endif
+ devdisr = in_be32(addr);
#ifdef CONFIG_PCIE1
SET_STD_PCIE_INFO(pci_info, 1);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE1); /* disable */
#endif
#ifdef CONFIG_PCIE2
SET_STD_PCIE_INFO(pci_info, 2);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE2); /* disable */
#endif
#ifdef CONFIG_PCIE3
SET_STD_PCIE_INFO(pci_info, 3);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE3); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE3); /* disable */
#endif
#ifdef CONFIG_PCIE4
SET_STD_PCIE_INFO(pci_info, 4);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE4); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE4); /* disable */
#endif
return busno;
diff --git a/include/fm_eth.h b/include/fm_eth.h
index e56541d..5d80e49 100644
--- a/include/fm_eth.h
+++ b/include/fm_eth.h
@@ -30,13 +30,21 @@ enum fm_port {
FM1_DTSEC3,
FM1_DTSEC4,
FM1_DTSEC5,
+ FM1_DTSEC6,
+ FM1_DTSEC9,
+ FM1_DTSEC10,
FM1_10GEC1,
+ FM1_10GEC2,
FM2_DTSEC1,
FM2_DTSEC2,
FM2_DTSEC3,
FM2_DTSEC4,
FM2_DTSEC5,
+ FM2_DTSEC6,
+ FM2_DTSEC9,
+ FM2_DTSEC10,
FM2_10GEC1,
+ FM2_10GEC2,
NUM_FM_PORTS,
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 17/28] powerpc/mpc85xx: Add B4860 and variant SoCs
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (14 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 16/28] powerpc/mpc85xx: Add T4240 SoC York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 18/28] fm/mEMAC: add mEMAC frame work York Sun
` (10 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Add support for Freescale B4860 and variant SoCs. Features of B4860 are
(incomplete list):
Six fully-programmable StarCore SC3900 FVP subsystems, divided into three
clusters-each core runs up to 1.2 GHz, with an architecture highly
optimized for wireless base station applications
Four dual-thread e6500 Power Architecture processors organized in one
cluster-each core runs up to 1.8 GHz
Two DDR3/3L controllers for high-speed, industry-standard memory interface
each runs at up to 1866.67 MHz
MAPLE-B3 hardware acceleration-for forward error correction schemes
including Turbo or Viterbi decoding, Turbo encoding and rate matching,
MIMO MMSE equalization scheme, matrix operations, CRC insertion and
check, DFT/iDFT and FFT/iFFT calculations, PUSCH/PDSCH acceleration,
and UMTS chip rate acceleration
CoreNet fabric that fully supports coherency using MESI protocol between
the e6500 cores, SC3900 FVP cores, memories and external interfaces.
CoreNet fabric interconnect runs at 667 MHz and supports coherent and
non-coherent out of order transactions with prioritization and
bandwidth allocation amongst CoreNet endpoints.
Data Path Acceleration Architecture, which includes the following:
Frame Manager (FMan), which supports in-line packet parsing and general
classification to enable policing and QoS-based packet distribution
Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading
of queue management, task management, load distribution, flow ordering,
buffer management, and allocation tasks from the cores
Security engine (SEC 5.3)-crypto-acceleration for protocols such as
IPsec, SSL, and 802.16
RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound and
outbound). Supports types 5, 6 (outbound only)
Large internal cache memory with snooping and stashing capabilities for
bandwidth saving and high utilization of processor elements. The
9856-Kbyte internal memory space includes the following:
32 Kbyte L1 ICache per e6500/SC3900 core
32 Kbyte L1 DCache per e6500/SC3900 core
2048 Kbyte unified L2 cache for each SC3900 FVP cluster
2048 Kbyte unified L2 cache for the e6500 cluster
Two 512 Kbyte shared L3 CoreNet platform caches (CPC)
Sixteen 10-GHz SerDes lanes serving:
Two Serial RapidIO interfaces. Each supports up to 4 lanes and a total
of up to 8 lanes
Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue-
less antenna connection
Two 10-Gbit Ethernet controllers (10GEC)
Six 1G/2.5-Gbit Ethernet controllers for network communications
PCI Express controller
Debug (Aurora)
Two OCeaN DMAs
Various system peripherals
182 32-bit timers
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
---
arch/powerpc/cpu/mpc85xx/Makefile | 3 +
arch/powerpc/cpu/mpc85xx/b4860_ids.c | 141 +++++++++++++++++++++++++
arch/powerpc/cpu/mpc85xx/b4860_serdes.c | 162 +++++++++++++++++++++++++++++
arch/powerpc/cpu/mpc8xxx/cpu.c | 7 ++
arch/powerpc/include/asm/config_mpc85xx.h | 23 ++++
arch/powerpc/include/asm/immap_85xx.h | 10 ++
arch/powerpc/include/asm/processor.h | 7 ++
drivers/net/fm/Makefile | 1 +
drivers/net/fm/b4860.c | 79 ++++++++++++++
9 files changed, 433 insertions(+)
create mode 100644 arch/powerpc/cpu/mpc85xx/b4860_ids.c
create mode 100644 arch/powerpc/cpu/mpc85xx/b4860_serdes.c
create mode 100644 drivers/net/fm/b4860.c
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index bde26b0..bfeb7f4 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -68,6 +68,7 @@ COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o
COBJS-$(CONFIG_BSC9131) += ddr-gen3.o
COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o
COBJS-$(CONFIG_CPM2) += ether_fcc.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
@@ -82,6 +83,7 @@ COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o
+COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_CPM2) += serial_scc.o
@@ -114,6 +116,7 @@ COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
+COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
COBJS = $(COBJS-y)
COBJS += cpu.o
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
new file mode 100644
index 0000000..7d33731
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 0),
+ SET_QP_INFO(10, 36, 1, 0),
+ SET_QP_INFO(11, 37, 1, 1),
+ SET_QP_INFO(12, 38, 1, 1),
+ SET_QP_INFO(13, 39, 1, 2),
+ SET_QP_INFO(14, 40, 1, 2),
+ SET_QP_INFO(15, 41, 1, 3),
+ SET_QP_INFO(16, 42, 1, 3),
+ SET_QP_INFO(17, 43, 1, 0),
+ SET_QP_INFO(18, 44, 1, 0),
+ SET_QP_INFO(19, 45, 1, 1),
+ SET_QP_INFO(20, 46, 1, 1),
+ SET_QP_INFO(21, 47, 1, 2),
+ SET_QP_INFO(22, 48, 1, 2),
+ SET_QP_INFO(23, 49, 1, 3),
+ SET_QP_INFO(24, 50, 1, 3),
+ SET_QP_INFO(25, 51, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_1(1, 307),
+ SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+ SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+ SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+ SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+ SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+ SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+ SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 678),
+ SET_RMAN_LIODN(1, 679),
+ SET_RMAN_LIODN(2, 680),
+ SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
new file mode 100644
index 0000000..9990202
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+ u8 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {0x0D, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x0E, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x12, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x2a, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x30, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x32, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x33, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x34, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x3E, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {0x18, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x1D, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x2B, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x30, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ AURORA, AURORA,
+ SRIO1, SRIO1}},
+ {0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4C, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x84, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2, AURORA, AURORA,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x85, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2, AURORA, AURORA,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x87, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x93, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0x9E, {PCIE1, PCIE1, PCIE1, PCIE1,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0x9A, {PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0xB2, {PCIE1, PCIE1, PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0xC3, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {}
+};
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+ serdes2_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 45ca487..4223106 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -77,6 +77,13 @@ struct cpu_type cpu_type_list [] = {
CPU_TYPE_ENTRY(BSC9131, 9131, 1),
CPU_TYPE_ENTRY(T4240, T4240, 0),
CPU_TYPE_ENTRY(T4120, T4120, 0),
+ CPU_TYPE_ENTRY(B4860, B4860, 0),
+ CPU_TYPE_ENTRY(G4860, G4860, 0),
+ CPU_TYPE_ENTRY(G4060, G4060, 0),
+ CPU_TYPE_ENTRY(B4440, B4440, 0),
+ CPU_TYPE_ENTRY(G4440, G4440, 0),
+ CPU_TYPE_ENTRY(B4420, B4420, 0),
+ CPU_TYPE_ENTRY(B4220, B4220, 0),
#elif defined(CONFIG_MPC86xx)
CPU_TYPE_ENTRY(8610, 8610, 1),
CPU_TYPE_ENTRY(8641, 8641, 2),
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 0a04e6f..47adc40 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -477,6 +477,29 @@
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+#elif defined(CONFIG_PPC_B4860)
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#define CONFIG_MAX_CPUS 4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
+#define CONFIG_SYS_FSL_NUM_LAWS 32
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 1
+#define CONFIG_SYS_NUM_FM1_DTSEC 6
+#define CONFIG_SYS_NUM_FM1_10GEC 2
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_ERRATUM_A_004934
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+
#else
#error Processor type not defined for this platform
#endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index a1c04e0..5a811d9 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1727,6 +1727,7 @@ typedef struct ccsr_gur {
#define FSL_CORENET_DEVDISR2_10GEC2_2 0x00000400
#define FSL_CORENET_DEVDISR2_FM1 0x00000080
#define FSL_CORENET_DEVDISR2_FM2 0x00000040
+#define FSL_CORENET_DEVDISR2_CPRI 0x00000008
#define FSL_CORENET_DEVDISR3_PCIE1 0x80000000
#define FSL_CORENET_DEVDISR3_PCIE2 0x40000000
#define FSL_CORENET_DEVDISR3_PCIE3 0x20000000
@@ -1736,6 +1737,9 @@ typedef struct ccsr_gur {
#define FSL_CORENET_DEVDISR3_QMAN 0x00080000
#define FSL_CORENET_DEVDISR3_BMAN 0x00040000
#define FSL_CORENET_DEVDISR3_LA1 0x00008000
+#define FSL_CORENET_DEVDISR3_MAPLE1 0x00000800
+#define FSL_CORENET_DEVDISR3_MAPLE2 0x00000400
+#define FSL_CORENET_DEVDISR3_MAPLE3 0x00000200
#define FSL_CORENET_DEVDISR4_I2C1 0x80000000
#define FSL_CORENET_DEVDISR4_I2C2 0x40000000
#define FSL_CORENET_DEVDISR4_DUART1 0x20000000
@@ -1751,6 +1755,7 @@ typedef struct ccsr_gur {
#define FSL_CORENET_DEVDISR5_GPIO 0x00400000
#define FSL_CORENET_DEVDISR5_DBG 0x00200000
#define FSL_CORENET_DEVDISR5_NAL 0x00100000
+#define FSL_CORENET_DEVDISR5_TIMERS 0x00020000
#define FSL_CORENET_NUM_DEVDISR 5
#else
#define FSL_CORENET_DEVDISR_PCIE1 0x80000000
@@ -1833,6 +1838,11 @@ typedef struct ccsr_gur {
#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT 11
#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL 0x000000f8
#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT 3
+#elif defined(CONFIG_PPC_B4860)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfe000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16
#endif
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 0841749..6699fd0 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1097,6 +1097,13 @@
#define SVR_P5020 0x822000
#define SVR_T4240 0x824000
#define SVR_T4120 0x824001
+#define SVR_B4860 0X868000
+#define SVR_G4860 0x868001
+#define SVR_G4060 0x868003
+#define SVR_B4440 0x868100
+#define SVR_G4440 0x868101
+#define SVR_B4420 0x868102
+#define SVR_B4220 0x868103
#define SVR_8610 0x80A000
#define SVR_8641 0x809000
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 73f64ad..4642c54 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -41,6 +41,7 @@ COBJS-$(CONFIG_PPC_P3041) += p5020.o
COBJS-$(CONFIG_PPC_P4080) += p4080.o
COBJS-$(CONFIG_PPC_P5020) += p5020.o
COBJS-$(CONFIG_PPC_T4240) += t4240.o
+COBJS-$(CONFIG_PPC_B4860) += b4860.o
endif
COBJS := $(COBJS-y)
diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c
new file mode 100644
index 0000000..9739e3d
--- /dev/null
+++ b/drivers/net/fm/b4860.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+ [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5,
+ [FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6,
+ [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1,
+ [FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC1 || port == FM1_10GEC2)
+ && (is_serdes_configured(XAUI_FM1)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ /* Fix me need to handle RGMII here first */
+
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ case FM1_DTSEC3:
+ case FM1_DTSEC4:
+ case FM1_DTSEC5:
+ case FM1_DTSEC6:
+ if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 18/28] fm/mEMAC: add mEMAC frame work
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (15 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 17/28] powerpc/mpc85xx: Add B4860 and variant SoCs York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 19/28] powerpc/mpc8xxx: Update DDR registers York Sun
` (9 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
From: Roy Zang <tie-fei.zang@freescale.com>
The multirate ethernet media access controller (mEMAC) interfaces to
10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII
interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface.
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
---
arch/powerpc/include/asm/config_mpc85xx.h | 2 +
arch/powerpc/include/asm/fsl_fman.h | 17 ++
arch/powerpc/include/asm/fsl_memac.h | 271 +++++++++++++++++++++++++++++
drivers/net/fm/Makefile | 4 +
drivers/net/fm/eth.c | 39 ++++-
drivers/net/fm/memac.c | 132 ++++++++++++++
drivers/net/fm/memac_phy.c | 150 ++++++++++++++++
include/fm_eth.h | 45 ++++-
include/fsl_mdio.h | 6 +-
9 files changed, 661 insertions(+), 5 deletions(-)
create mode 100644 arch/powerpc/include/asm/fsl_memac.h
create mode 100644 drivers/net/fm/memac.c
create mode 100644 drivers/net/fm/memac_phy.c
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 47adc40..3799032 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -466,6 +466,7 @@
#define CONFIG_SYS_NUM_FM2_10GEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 3
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0"
@@ -490,6 +491,7 @@
#define CONFIG_SYS_NUM_FM1_10GEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
diff --git a/arch/powerpc/include/asm/fsl_fman.h b/arch/powerpc/include/asm/fsl_fman.h
index 2c0c9bc..299daca 100644
--- a/arch/powerpc/include/asm/fsl_fman.h
+++ b/arch/powerpc/include/asm/fsl_fman.h
@@ -423,6 +423,14 @@ typedef struct fm_10gec_mdio {
u8 res[4*1024];
} fm_10gec_mdio_t;
+typedef struct fm_memac {
+ u8 res[4*1024];
+} fm_memac_t;
+
+typedef struct fm_memac_mdio {
+ u8 res[4*1024];
+} fm_memac_mdio_t;
+
typedef struct fm_1588 {
u8 res[4*1024];
} fm_1588_t;
@@ -446,6 +454,14 @@ typedef struct ccsr_fman {
u8 res1[8*1024];
fm_soft_parser_t fm_soft_parser;
u8 res2[96*1024];
+#ifdef CONFIG_SYS_FMAN_V3
+ struct {
+ fm_memac_t fm_memac;
+ fm_memac_mdio_t fm_memac_mdio;
+ } memac[10];
+ u8 res4[32*1024];
+ fm_memac_mdio_t fm_dedicated_mdio[2];
+#else
struct {
fm_dtsec_t fm_dtesc;
fm_mdio_t fm_mdio;
@@ -455,6 +471,7 @@ typedef struct ccsr_fman {
fm_10gec_mdio_t fm_10gec_mdio;
} mac_10g[1];
u8 res4[48*1024];
+#endif
fm_1588_t fm_1588;
u8 res5[4*1024];
} ccsr_fman_t;
diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h
new file mode 100644
index 0000000..d6b60e6
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_memac.h
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MEMAC_H__
+#define __MEMAC_H__
+
+#include <phy.h>
+
+struct memac {
+ /* memac general control and status registers */
+ u32 res_0[2];
+ u32 command_config; /* Control and configuration register */
+ u32 mac_addr_0; /* Lower 32 bits of 48-bit MAC address */
+ u32 mac_addr_1; /* Upper 16 bits of 48-bit MAC address */
+ u32 maxfrm; /* Maximum frame length register */
+ u32 res_18[5];
+ u32 hashtable_ctrl; /* Hash table control register */
+ u32 res_30[4];
+ u32 ievent; /* Interrupt event register */
+ u32 tx_ipg_length; /* Transmitter inter-packet-gap register */
+ u32 res_48;
+ u32 imask; /* interrupt mask register */
+ u32 res_50;
+ u32 cl_pause_quanta[4]; /* CL01-CL67 pause quanta register */
+ u32 cl_pause_thresh[4]; /* CL01-CL67 pause thresh register */
+ u32 rx_pause_status; /* Receive pause status register */
+ u32 res_78[2];
+ u32 mac_addr[14]; /* MAC address */
+ u32 lpwake_timer; /* EEE low power wakeup timer register */
+ u32 sleep_timer; /* Transmit EEE Low Power Timer register */
+ u32 res_c0[8];
+ u32 statn_config; /* Statistics configuration register */
+ u32 res_e4[7];
+
+ /* memac statistics counter registers */
+ u32 rx_eoct_l; /* Rx ethernet octests lower */
+ u32 rx_eoct_u; /* Rx ethernet octests upper */
+ u32 rx_oct_l; /* Rx octests lower */
+ u32 rx_oct_u; /* Rx octests upper */
+ u32 rx_align_err_l; /* Rx alignment error lower */
+ u32 rx_align_err_u; /* Rx alignment error upper */
+ u32 rx_pause_frame_l; /* Rx valid pause frame upper */
+ u32 rx_pause_frame_u; /* Rx valid pause frame upper */
+ u32 rx_frame_l; /* Rx frame counter lower */
+ u32 rx_frame_u; /* Rx frame counter upper */
+ u32 rx_frame_crc_err_l; /* Rx frame check sequence error lower */
+ u32 rx_frame_crc_err_u; /* Rx frame check sequence error upper */
+ u32 rx_vlan_l; /* Rx VLAN frame lower */
+ u32 rx_vlan_u; /* Rx VLAN frame upper */
+ u32 rx_err_l; /* Rx frame error lower */
+ u32 rx_err_u; /* Rx frame error upper */
+ u32 rx_uni_l; /* Rx unicast frame lower */
+ u32 rx_uni_u; /* Rx unicast frame upper */
+ u32 rx_multi_l; /* Rx multicast frame lower */
+ u32 rx_multi_u; /* Rx multicast frame upper */
+ u32 rx_brd_l; /* Rx broadcast frame lower */
+ u32 rx_brd_u; /* Rx broadcast frame upper */
+ u32 rx_drop_l; /* Rx dropped packets lower */
+ u32 rx_drop_u; /* Rx dropped packets upper */
+ u32 rx_pkt_l; /* Rx packets lower */
+ u32 rx_pkt_u; /* Rx packets upper */
+ u32 rx_undsz_l; /* Rx undersized packet lower */
+ u32 rx_undsz_u; /* Rx undersized packet upper */
+ u32 rx_64_l; /* Rx 64 oct packet lower */
+ u32 rx_64_u; /* Rx 64 oct packet upper */
+ u32 rx_127_l; /* Rx 65 to 127 oct packet lower */
+ u32 rx_127_u; /* Rx 65 to 127 oct packet upper */
+ u32 rx_255_l; /* Rx 128 to 255 oct packet lower */
+ u32 rx_255_u; /* Rx 128 to 255 oct packet upper */
+ u32 rx_511_l; /* Rx 256 to 511 oct packet lower */
+ u32 rx_511_u; /* Rx 256 to 511 oct packet upper */
+ u32 rx_1023_l; /* Rx 512 to 1023 oct packet lower */
+ u32 rx_1023_u; /* Rx 512 to 1023 oct packet upper */
+ u32 rx_1518_l; /* Rx 1024 to 1518 oct packet lower */
+ u32 rx_1518_u; /* Rx 1024 to 1518 oct packet upper */
+ u32 rx_1519_l; /* Rx 1519 to max oct packet lower */
+ u32 rx_1519_u; /* Rx 1519 to max oct packet upper */
+ u32 rx_oversz_l; /* Rx oversized packet lower */
+ u32 rx_oversz_u; /* Rx oversized packet upper */
+ u32 rx_jabber_l; /* Rx Jabber packet lower */
+ u32 rx_jabber_u; /* Rx Jabber packet upper */
+ u32 rx_frag_l; /* Rx Fragment packet lower */
+ u32 rx_frag_u; /* Rx Fragment packet upper */
+ u32 rx_cnp_l; /* Rx control packet lower */
+ u32 rx_cnp_u; /* Rx control packet upper */
+ u32 rx_drntp_l; /* Rx dripped not truncated packet lower */
+ u32 rx_drntp_u; /* Rx dripped not truncated packet upper */
+ u32 res_1d0[0xc];
+
+ u32 tx_eoct_l; /* Tx ethernet octests lower */
+ u32 tx_eoct_u; /* Tx ethernet octests upper */
+ u32 tx_oct_l; /* Tx octests lower */
+ u32 tx_oct_u; /* Tx octests upper */
+ u32 res_210[0x2];
+ u32 tx_pause_frame_l; /* Tx valid pause frame lower */
+ u32 tx_pause_frame_u; /* Tx valid pause frame upper */
+ u32 tx_frame_l; /* Tx frame counter lower */
+ u32 tx_frame_u; /* Tx frame counter upper */
+ u32 tx_frame_crc_err_l; /* Tx frame check sequence error lower */
+ u32 tx_frame_crc_err_u; /* Tx frame check sequence error upper */
+ u32 tx_vlan_l; /* Tx VLAN frame lower */
+ u32 tx_vlan_u; /* Tx VLAN frame upper */
+ u32 tx_frame_err_l; /* Tx frame error lower */
+ u32 tx_frame_err_u; /* Tx frame error upper */
+ u32 tx_uni_l; /* Tx unicast frame lower */
+ u32 tx_uni_u; /* Tx unicast frame upper */
+ u32 tx_multi_l; /* Tx multicast frame lower */
+ u32 tx_multi_u; /* Tx multicast frame upper */
+ u32 tx_brd_l; /* Tx broadcast frame lower */
+ u32 tx_brd_u; /* Tx broadcast frame upper */
+ u32 res_258[0x2];
+ u32 tx_pkt_l; /* Tx packets lower */
+ u32 tx_pkt_u; /* Tx packets upper */
+ u32 tx_undsz_l; /* Tx undersized packet lower */
+ u32 tx_undsz_u; /* Tx undersized packet upper */
+ u32 tx_64_l; /* Tx 64 oct packet lower */
+ u32 tx_64_u; /* Tx 64 oct packet upper */
+ u32 tx_127_l; /* Tx 65 to 127 oct packet lower */
+ u32 tx_127_u; /* Tx 65 to 127 oct packet upper */
+ u32 tx_255_l; /* Tx 128 to 255 oct packet lower */
+ u32 tx_255_u; /* Tx 128 to 255 oct packet upper */
+ u32 tx_511_l; /* Tx 256 to 511 oct packet lower */
+ u32 tx_511_u; /* Tx 256 to 511 oct packet upper */
+ u32 tx_1023_l; /* Tx 512 to 1023 oct packet lower */
+ u32 tx_1023_u; /* Tx 512 to 1023 oct packet upper */
+ u32 tx_1518_l; /* Tx 1024 to 1518 oct packet lower */
+ u32 tx_1518_u; /* Tx 1024 to 1518 oct packet upper */
+ u32 tx_1519_l; /* Tx 1519 to max oct packet lower */
+ u32 tx_1519_u; /* Tx 1519 to max oct packet upper */
+ u32 res_2a8[0x6];
+ u32 tx_cnp_l; /* Tx control packet lower */
+ u32 tx_cnp_u; /* Tx control packet upper */
+ u32 res_2c8[0xe];
+
+ /* Line interface control register */
+ u32 if_mode; /* interface mode control */
+ u32 if_status; /* interface status */
+ u32 res_308[0xe];
+
+ /* HiGig/2 Register */
+ u32 hg_config; /* HiGig2 control and configuration */
+ u32 res_344[0x3];
+ u32 hg_pause_quanta; /* HiGig2 pause quanta */
+ u32 res_354[0x3];
+ u32 hg_pause_thresh; /* HiGig2 pause quanta threshold */
+ u32 res_364[0x3];
+ u32 hgrx_pause_status; /* HiGig2 rx pause quanta status */
+ u32 hg_fifos_status; /* HiGig2 fifos status */
+ u32 rhm; /* Rx HiGig2 message counter register */
+ u32 thm;/* Tx HiGig2 message counter register */
+ u32 res_380[0x320];
+};
+
+/* COMMAND_CONFIG - command and configuration register */
+#define MEMAC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */
+#define MEMAC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */
+#define MEMAC_CMD_CFG_RXTX_EN (MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN)
+
+/* HASHTABLE_CTRL - Hashtable control register */
+#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */
+#define HASHTABLE_CTRL_ADDR_MASK 0x000001ff
+
+/* TX_IPG_LENGTH - Transmit inter-packet gap length register */
+#define TX_IPG_LENGTH_IPG_LEN_MASK 0x000003ff
+
+/* IMASK - interrupt mask register */
+#define IMASK_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event mask */
+#define IMASK_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion mask */
+#define IMASK_REM_FAULT 0x00004000 /* remote fault mask */
+#define IMASK_LOC_FAULT 0x00002000 /* local fault mask */
+#define IMASK_TX_ECC_ER 0x00001000 /* Tx frame ECC error mask */
+#define IMASK_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow mask */
+#define IMASK_TX_ER 0x00000200 /* Tx frame error mask */
+#define IMASK_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow mask */
+#define IMASK_RX_ECC_ER 0x00000080 /* Rx frame ECC error mask */
+#define IMASK_RX_JAB_FRM 0x00000040 /* Rx jabber frame mask */
+#define IMASK_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame mask */
+#define IMASK_RX_RUNT_FRM 0x00000010 /* Rx runt frame mask */
+#define IMASK_RX_FRAG_FRM 0x00000008 /* Rx fragment frame mask */
+#define IMASK_RX_LEN_ER 0x00000004 /* Rx payload length error mask */
+#define IMASK_RX_CRC_ER 0x00000002 /* Rx CRC error mask */
+#define IMASK_RX_ALIGN_ER 0x00000001 /* Rx alignment error mask */
+
+#define IMASK_MASK_ALL 0x00000000
+
+/* IEVENT - interrupt event register */
+#define IEVENT_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event */
+#define IEVENT_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion */
+#define IEVENT_REM_FAULT 0x00004000 /* remote fault */
+#define IEVENT_LOC_FAULT 0x00002000 /* local fault */
+#define IEVENT_TX_ECC_ER 0x00001000 /* Tx frame ECC error */
+#define IEVENT_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow */
+#define IEVENT_TX_ER 0x00000200 /* Tx frame error */
+#define IEVENT_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow */
+#define IEVENT_RX_ECC_ER 0x00000080 /* Rx frame ECC error */
+#define IEVENT_RX_JAB_FRM 0x00000040 /* Rx jabber frame */
+#define IEVENT_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame */
+#define IEVENT_RX_RUNT_FRM 0x00000010 /* Rx runt frame */
+#define IEVENT_RX_FRAG_FRM 0x00000008 /* Rx fragment frame */
+#define IEVENT_RX_LEN_ER 0x00000004 /* Rx payload length error */
+#define IEVENT_RX_CRC_ER 0x00000002 /* Rx CRC error */
+#define IEVENT_RX_ALIGN_ER 0x00000001 /* Rx alignment error */
+
+#define IEVENT_CLEAR_ALL 0xffffffff
+
+/* IF_MODE - Interface Mode Register */
+#define IF_MODE_EN_AUTO 0x00008000 /* 1 - Enable automatic speed selection */
+#define IF_MODE_XGMII 0x00000000 /* 00- XGMII(10) interface mode */
+#define IF_MODE_GMII 0x00000002 /* 10- GMII interface mode */
+#define IF_MODE_MASK 0x00000003 /* mask for mode interface mode */
+#define IF_MODE_RG 0x00000004 /* 1- RGMII */
+#define IF_MODE_RM 0x00000008 /* 1- RGMII */
+
+#define IF_DEFAULT (IF_GMII)
+
+/* Internal PHY Registers - SGMII */
+#define PHY_SGMII_CR_PHY_RESET 0x8000
+#define PHY_SGMII_CR_RESET_AN 0x0200
+#define PHY_SGMII_CR_DEF_VAL 0x1140
+#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001
+#define PHY_SGMII_IF_MODE_AN 0x0002
+#define PHY_SGMII_IF_MODE_SGMII 0x0001
+
+struct memac_mdio_controller {
+ u32 res0[0xc];
+ u32 mdio_stat; /* MDIO configuration and status */
+ u32 mdio_ctl; /* MDIO control */
+ u32 mdio_data; /* MDIO data */
+ u32 mdio_addr; /* MDIO address */
+};
+
+#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8)
+#define MDIO_STAT_BSY (1 << 0)
+#define MDIO_STAT_RD_ER (1 << 1)
+#define MDIO_STAT_PRE (1 << 5)
+#define MDIO_STAT_ENC (1 << 6)
+#define MDIO_STAT_HOLD_15_CLK (7 << 2)
+
+#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f)
+#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5)
+#define MDIO_CTL_PRE_DIS (1 << 10)
+#define MDIO_CTL_SCAN_EN (1 << 11)
+#define MDIO_CTL_POST_INC (1 << 14)
+#define MDIO_CTL_READ (1 << 15)
+
+#define MDIO_DATA(x) (x & 0xffff)
+#define MDIO_DATA_BSY (1 << 31)
+
+struct fsl_enet_mac;
+
+void init_memac(struct fsl_enet_mac *mac, void *base, void *phyregs,
+ int max_rx_len);
+
+#endif
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 4642c54..7a1fcdd 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -32,6 +32,10 @@ COBJS-y += init.o
COBJS-y += tgec.o
COBJS-y += tgec_phy.o
+# Soc have FMAN v3 with mEMAC
+COBJS-$(CONFIG_SYS_FMAN_V3) += memac_phy.o
+COBJS-$(CONFIG_SYS_FMAN_V3) += memac.o
+
# SoC specific SERDES support
COBJS-$(CONFIG_P1017) += p1023.o
COBJS-$(CONFIG_P1023) += p1023.o
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 2b616ad..ed23fdd 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
* This program is free software; you can redistribute it and/or
@@ -28,6 +28,7 @@
#include <phy.h>
#include <asm/fsl_dtsec.h>
#include <asm/fsl_tgec.h>
+#include <asm/fsl_memac.h>
#include "fm.h"
@@ -47,6 +48,28 @@ static int num_controllers;
/* Configure the TBI for SGMII operation */
void dtsec_configure_serdes(struct fm_eth *priv)
{
+#ifdef CONFIG_SYS_FMAN_V3
+ u32 value;
+ struct mii_dev bus;
+ bus.priv = priv->mac->phyregs;
+
+ /* SGMII IF mode + AN enable */
+ value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII;
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value);
+
+ /* Dev ability according to SGMII specification */
+ value = PHY_SGMII_DEV_ABILITY_SGMII;
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, value);
+
+ /* Adjust link timer for SGMII -
+ 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x3);
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40);
+
+ /* Restart AN */
+ value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value);
+#else
struct dtsec *regs = priv->mac->base;
struct tsec_mii_mng *phyregs = priv->mac->phyregs;
@@ -60,15 +83,18 @@ void dtsec_configure_serdes(struct fm_eth *priv)
TBIANA_SGMII_ACK);
tsec_local_mdio_write(phyregs, in_be32(®s->tbipa), 0,
TBI_CR, TBICR_SETTINGS);
+#endif
}
static void dtsec_init_phy(struct eth_device *dev)
{
struct fm_eth *fm_eth = dev->priv;
- struct dtsec *regs = (struct dtsec *)fm_eth->mac->base;
+#ifndef CONFIG_SYS_FMAN_V3
+ struct dtsec *regs = (struct dtsec *)fm_eth->mac->base;
/* Assign a Physical address to the TBI */
out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE);
+#endif
if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII)
dtsec_configure_serdes(fm_eth);
@@ -541,6 +567,10 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
num = fm_eth->num;
+#ifdef CONFIG_SYS_FMAN_V3
+ base = ®->memac[num].fm_memac;
+ phyregs = ®->memac[num].fm_memac_mdio;
+#else
/* Get the mac registers base address */
if (fm_eth->type == FM_ETH_1G_E) {
base = ®->mac_1g[num].fm_dtesc;
@@ -549,6 +579,7 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
base = ®->mac_10g[num].fm_10gec;
phyregs = ®->mac_10g[num].fm_10gec_mdio;
}
+#endif
/* alloc mac controller */
mac = malloc(sizeof(struct fsl_enet_mac));
@@ -559,10 +590,14 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
/* save the mac to fm_eth struct */
fm_eth->mac = mac;
+#ifdef CONFIG_SYS_FMAN_V3
+ init_memac(mac, base, phyregs, MAX_RXBUF_LEN);
+#else
if (fm_eth->type == FM_ETH_1G_E)
init_dtsec(mac, base, phyregs, MAX_RXBUF_LEN);
else
init_tgec(mac, base, phyregs, MAX_RXBUF_LEN);
+#endif
return 1;
}
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
new file mode 100644
index 0000000..32c7054
--- /dev/null
+++ b/drivers/net/fm/memac.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* MAXFRM - maximum frame length */
+#define MAXFRM_MASK 0x0000ffff
+
+#include <common.h>
+#include <phy.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/fsl_enet.h>
+#include <asm/fsl_memac.h>
+
+#include "fm.h"
+
+static void memac_init_mac(struct fsl_enet_mac *mac)
+{
+ struct memac *regs = mac->base;
+
+ /* mask all interrupt */
+ out_be32(®s->imask, IMASK_MASK_ALL);
+
+ /* clear all events */
+ out_be32(®s->ievent, IEVENT_CLEAR_ALL);
+
+ /* set the max receive length */
+ out_be32(®s->maxfrm, mac->max_rx_len & MAXFRM_MASK);
+
+ /* multicast frame reception for the hash entry disable */
+ out_be32(®s->hashtable_ctrl, 0);
+}
+
+static void memac_enable_mac(struct fsl_enet_mac *mac)
+{
+ struct memac *regs = mac->base;
+
+ setbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN);
+}
+
+static void memac_disable_mac(struct fsl_enet_mac *mac)
+{
+ struct memac *regs = mac->base;
+
+ clrbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN);
+}
+
+static void memac_set_mac_addr(struct fsl_enet_mac *mac, u8 *mac_addr)
+{
+ struct memac *regs = mac->base;
+ u32 mac_addr0, mac_addr1;
+
+ /*
+ * if a station address of 0x12345678ABCD, perform a write to
+ * MAC_ADDR0 of 0x78563412, MAC_ADDR1 of 0x0000CDAB
+ */
+ mac_addr0 = (mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+ (mac_addr[1] << 8) | (mac_addr[0]);
+ out_be32(®s->mac_addr_0, mac_addr0);
+
+ mac_addr1 = ((mac_addr[5] << 8) | mac_addr[4]) & 0x0000ffff;
+ out_be32(®s->mac_addr_1, mac_addr1);
+}
+
+static void memac_set_interface_mode(struct fsl_enet_mac *mac,
+ phy_interface_t type, int speed)
+{
+ /* Roy need more work here */
+
+ struct memac *regs = mac->base;
+ u32 if_mode, if_status;
+
+ /* clear all bits relative with interface mode */
+ if_mode = in_be32(®s->if_mode);
+ if_status = in_be32(®s->if_status);
+
+ /* set interface mode */
+ switch (type) {
+ case PHY_INTERFACE_MODE_GMII:
+ if_mode &= ~IF_MODE_MASK;
+ if_mode |= IF_MODE_GMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ if_mode |= (IF_MODE_GMII | IF_MODE_RG);
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ if_mode |= (IF_MODE_GMII | IF_MODE_RM);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ if_mode &= ~IF_MODE_MASK;
+ if_mode |= (IF_MODE_GMII);
+ break;
+ default:
+ break;
+ }
+ /* Enable automatic speed selection */
+ if_mode |= IF_MODE_EN_AUTO;
+
+ debug(" %s, if_mode = %x\n", __func__, if_mode);
+ debug(" %s, if_status = %x\n", __func__, if_status);
+ out_be32(®s->if_mode, if_mode);
+ return;
+}
+
+void init_memac(struct fsl_enet_mac *mac, void *base,
+ void *phyregs, int max_rx_len)
+{
+ mac->base = base;
+ mac->phyregs = phyregs;
+ mac->max_rx_len = max_rx_len;
+ mac->init_mac = memac_init_mac;
+ mac->enable_mac = memac_enable_mac;
+ mac->disable_mac = memac_disable_mac;
+ mac->set_mac_addr = memac_set_mac_addr;
+ mac->set_if_mode = memac_set_interface_mode;
+}
diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c
new file mode 100644
index 0000000..ea6118b
--- /dev/null
+++ b/drivers/net/fm/memac_phy.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Andy Fleming <afleming@freescale.com>
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ * Some part is taken from tsec.c
+ */
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/io.h>
+#include <asm/fsl_memac.h>
+#include <fm_eth.h>
+
+/*
+ * Write value to the PHY for this device to the register at regnum, waiting
+ * until the write is done before it returns. All PHY configuration has to be
+ * done through the TSEC1 MIIM regs
+ */
+int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum, u16 value)
+{
+ u32 mdio_ctl;
+ struct memac_mdio_controller *regs = bus->priv;
+ u32 c45 = 1; /* Default to 10G interface */
+
+ if (dev_addr == MDIO_DEVAD_NONE) {
+ c45 = 0; /* clause 22 */
+ dev_addr = regnum & 0x1f;
+ clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ } else {
+ setbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK);
+ }
+
+ /* Wait till the bus is free */
+ while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Set the port and dev addr */
+ mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+ out_be32(®s->mdio_ctl, mdio_ctl);
+
+ /* Set the register address */
+ if (c45)
+ out_be32(®s->mdio_addr, regnum & 0xffff);
+
+ /* Wait till the bus is free */
+ while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Write the value to the register */
+ out_be32(®s->mdio_data, MDIO_DATA(value));
+
+ /* Wait till the MDIO write is complete */
+ while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY)
+ ;
+
+ return 0;
+}
+
+/*
+ * Reads from register regnum in the PHY for device dev, returning the value.
+ * Clears miimcom first. All PHY configuration has to be done through the
+ * TSEC1 MIIM regs
+ */
+int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum)
+{
+ u32 mdio_ctl;
+ struct memac_mdio_controller *regs = bus->priv;
+ u32 c45 = 1;
+
+ if (dev_addr == MDIO_DEVAD_NONE) {
+ c45 = 0; /* clause 22 */
+ dev_addr = regnum & 0x1f;
+ clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ } else {
+ setbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK);
+ }
+
+ /* Wait till the bus is free */
+ while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Set the Port and Device Addrs */
+ mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+ out_be32(®s->mdio_ctl, mdio_ctl);
+
+ /* Set the register address */
+ if (c45)
+ out_be32(®s->mdio_addr, regnum & 0xffff);
+
+ /* Wait till the bus is free */
+ while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Initiate the read */
+ mdio_ctl |= MDIO_CTL_READ;
+ out_be32(®s->mdio_ctl, mdio_ctl);
+
+ /* Wait till the MDIO write is complete */
+ while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY)
+ ;
+
+ /* Return all Fs if nothing was there */
+ if (in_be32(®s->mdio_stat) & MDIO_STAT_RD_ER)
+ return 0xffff;
+
+ return in_be32(®s->mdio_data) & 0xffff;
+}
+
+int memac_mdio_reset(struct mii_dev *bus)
+{
+ return 0;
+}
+
+int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info)
+{
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate FM TGEC MDIO bus\n");
+ return -1;
+ }
+
+ bus->read = memac_mdio_read;
+ bus->write = memac_mdio_write;
+ bus->reset = memac_mdio_reset;
+ sprintf(bus->name, info->name);
+
+ bus->priv = info->regs;
+
+ return mdio_register(bus);
+}
diff --git a/include/fm_eth.h b/include/fm_eth.h
index 5d80e49..495765b 100644
--- a/include/fm_eth.h
+++ b/include/fm_eth.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -53,8 +53,15 @@ enum fm_eth_type {
FM_ETH_10G_E,
};
+#ifdef CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfc000)
+#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000)
+#define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfc000)
+#define CONFIG_SYS_FM2_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfd000)
+#else
#define CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xe1120)
#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xf1000)
+#endif
#define DEFAULT_FM_MDIO_NAME "FSL_MDIO0"
#define DEFAULT_FM_TGEC_MDIO_NAME "FM_TGEC_MDIO"
@@ -65,6 +72,33 @@ enum fm_eth_type {
.phy_regs = (void *)pregs, \
.enet_if = PHY_INTERFACE_MODE_NONE, \
+#ifdef CONFIG_SYS_FMAN_V3
+#define FM_DTSEC_INFO_INITIALIZER(idx, n) \
+{ \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC_MDIO_ADDR) \
+ .index = idx, \
+ .num = n - 1, \
+ .type = FM_ETH_1G_E, \
+ .port = FM##idx##_DTSEC##n, \
+ .rx_port_id = RX_PORT_1G_BASE + n - 1, \
+ .tx_port_id = TX_PORT_1G_BASE + n - 1, \
+ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
+ offsetof(struct ccsr_fman, memac[n-1]),\
+}
+
+#define FM_TGEC_INFO_INITIALIZER(idx, n) \
+{ \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \
+ .index = idx, \
+ .num = n - 1, \
+ .type = FM_ETH_10G_E, \
+ .port = FM##idx##_10GEC##n, \
+ .rx_port_id = RX_PORT_10G_BASE + n - 1, \
+ .tx_port_id = TX_PORT_10G_BASE + n - 1, \
+ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
+ offsetof(struct ccsr_fman, memac[n-1]),\
+}
+#else
#define FM_DTSEC_INFO_INITIALIZER(idx, n) \
{ \
FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR) \
@@ -90,7 +124,7 @@ enum fm_eth_type {
.compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
offsetof(struct ccsr_fman, mac_10g[n-1]),\
}
-
+#endif
struct fm_eth_info {
u8 enabled;
u8 fm;
@@ -112,7 +146,14 @@ struct tgec_mdio_info {
char *name;
};
+struct memac_mdio_info {
+ struct memac_mdio_controller *regs;
+ char *name;
+};
+
int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info);
+int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info);
+
int fm_standard_init(bd_t *bis);
void fman_enet_init(void);
void fdt_fixup_fman_ethernet(void *fdt);
diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h
index ea8b54b..e24e828 100644
--- a/include/fsl_mdio.h
+++ b/include/fsl_mdio.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
* Jun-jie Zhang <b18070@freescale.com>
* Mingkai Hu <Mingkai.hu@freescale.com>
*
@@ -51,6 +51,10 @@ int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum);
int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
u16 value);
+int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum, u16 value);
+int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum);
struct fsl_pq_mdio_info {
struct tsec_mii_mng *regs;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 19/28] powerpc/mpc8xxx: Update DDR registers
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (16 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 18/28] fm/mEMAC: add mEMAC frame work York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 20/28] powerpc/mpc8xxx: Fix DDR driver handling quad-rank DIMMs and address calculation York Sun
` (8 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
DDRC ver 4.7 adds DDR_SLOW bit in sdram_cfg_2 register. This bit needs to be
set for speed lower than 1250MT/s.
CDR1 and CDR2 are control driver registers. ODT termination valueis for
IOs are defined. Starting from DDRC 4.7, the decoding of ODT for IOs is
000 -> Termsel off
001 -> 120 Ohm
010 -> 180 Ohm
011 -> 75 Ohm
100 -> 110 Ohm
101 -> 60 Ohm
110 -> 70 Ohm
111 -> 47 Ohm
Add two write leveling registers. Each QDS now has its own write leveling
start value. In case of zero value, the value of QDS0 will be used. These
values are board-specific and are set in board files.
Extend DDR register timing_cfg_1 to have 4 bits for each field.
DDR control driver registers and write leveling registers are added to
interactive debugging for easy access.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 5 +++++
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 22 ++++++++++++++++++--
arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 12 ++++++++++-
arch/powerpc/include/asm/config_mpc85xx.h | 2 ++
arch/powerpc/include/asm/fsl_ddr_sdram.h | 30 ++++++++++++++++++++++++++++
5 files changed, 68 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index ca4ed62..088cf45 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -121,6 +121,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+ if (regs->ddr_wrlvl_cntl_2)
+ out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
+ if (regs->ddr_wrlvl_cntl_3)
+ out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
+
out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 2592873..c28f9cd 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -451,8 +451,8 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
| ((caslat_ctrl & 0xF) << 16)
| ((refrec_ctrl & 0xF) << 12)
| ((wrrec_mclk & 0x0F) << 8)
- | ((acttoact_mclk & 0x07) << 4)
- | ((wrtord_mclk & 0x07) << 0)
+ | ((acttoact_mclk & 0x0F) << 4)
+ | ((wrtord_mclk & 0x0F) << 0)
);
debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
}
@@ -659,6 +659,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
unsigned int dqs_cfg; /* DQS configuration */
unsigned int odt_cfg = 0; /* ODT configuration */
unsigned int num_pr; /* Number of posted refreshes */
+ unsigned int slow = 0; /* DDR will be run less than 1250 */
unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */
unsigned int ap_en; /* Address Parity Enable */
unsigned int d_init; /* DRAM data initialization */
@@ -692,6 +693,10 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
obc_cfg = 0;
#endif
+#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)
+ slow = get_ddr_freq(0) < 1249000000;
+#endif
+
if (popts->registered_dimm_en) {
rcw_en = 1;
ap_en = popts->ap_en;
@@ -720,6 +725,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
| ((dqs_cfg & 0x3) << 26)
| ((odt_cfg & 0x3) << 21)
| ((num_pr & 0xf) << 12)
+ | ((slow & 1) << 11)
| (qd_en << 9)
| (unq_mrs_en << 8)
| ((obc_cfg & 0x1) << 6)
@@ -1347,6 +1353,11 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en,
| ((wrlvl_start & 0x1F) << 0)
);
debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl);
+ ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2;
+ debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2);
+ ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3;
+ debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3);
+
}
/* DDR Self Refresh Counter (DDR_SR_CNTR) */
@@ -1370,6 +1381,12 @@ static void set_ddr_cdr1(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1);
}
+static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
+{
+ ddr->ddr_cdr2 = popts->ddr_cdr2;
+ debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2);
+}
+
unsigned int
check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
{
@@ -1569,6 +1586,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
cas_latency, additive_latency);
set_ddr_cdr1(ddr, popts);
+ set_ddr_cdr2(ddr, popts);
set_ddr_sdram_cfg(ddr, popts, common_dimm);
ip_rev = fsl_ddr_get_version();
if (ip_rev > 0x40400)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
index f59d105..cb71f94 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
@@ -452,6 +452,8 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo,
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
+ CTRL_OPTIONS(ddr_cdr1),
+ CTRL_OPTIONS(ddr_cdr2),
CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
CTRL_OPTIONS(tFAW_window_four_activates_ps),
CTRL_OPTIONS(trwt_override),
@@ -518,6 +520,8 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
CFG_REGS(timing_cfg_5),
CFG_REGS(ddr_zq_cntl),
CFG_REGS(ddr_wrlvl_cntl),
+ CFG_REGS(ddr_wrlvl_cntl_2),
+ CFG_REGS(ddr_wrlvl_cntl_3),
CFG_REGS(ddr_sr_cntr),
CFG_REGS(ddr_sdram_rcw_1),
CFG_REGS(ddr_sdram_rcw_2),
@@ -525,6 +529,7 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
CFG_REGS(ddr_cdr2),
CFG_REGS(err_disable),
CFG_REGS(err_int_en),
+ CFG_REGS(ddr_eor),
};
static const unsigned int n_opts = ARRAY_SIZE(options);
@@ -584,6 +589,8 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo,
CFG_REGS(timing_cfg_5),
CFG_REGS(ddr_zq_cntl),
CFG_REGS(ddr_wrlvl_cntl),
+ CFG_REGS(ddr_wrlvl_cntl_2),
+ CFG_REGS(ddr_wrlvl_cntl_3),
CFG_REGS(ddr_sr_cntr),
CFG_REGS(ddr_sdram_rcw_1),
CFG_REGS(ddr_sdram_rcw_2),
@@ -593,7 +600,7 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo,
CFG_REGS(err_int_en),
CFG_REGS(ddr_sdram_rcw_2),
CFG_REGS(ddr_sdram_rcw_2),
-
+ CFG_REGS(ddr_eor),
};
static const unsigned int n_opts = ARRAY_SIZE(options);
@@ -689,6 +696,8 @@ static void print_memctl_options(const memctl_options_t *popts)
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
+ CTRL_OPTIONS_HEX(ddr_cdr1),
+ CTRL_OPTIONS_HEX(ddr_cdr2),
CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
CTRL_OPTIONS(tFAW_window_four_activates_ps),
CTRL_OPTIONS(trwt_override),
@@ -1597,6 +1606,7 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
* doesn't return
*/
do_reset(NULL, 0, 0, NULL);
+ printf("Reset didn't work\n");
}
if (strcmp(argv[0], "recompute") == 0) {
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 3799032..65c82bb 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -27,6 +27,8 @@
#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
#endif
+#define FSL_DDR_VER_4_7 47
+
/* Number of TLB CAM entries we have on FSL Book-E chips */
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index e271342..9cf9bd4 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -145,6 +145,31 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
/* DDR_CDR1 */
#define DDR_CDR1_DHC_EN 0x80000000
+#define DDR_CDR1_ODT_SHIFT 17
+#define DDR_CDR1_ODT_MASK 0x6
+#define DDR_CDR2_ODT_MASK 0x1
+#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
+#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
+
+#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
+ (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
+#define DDR_CDR_ODT_OFF 0x0
+#define DDR_CDR_ODT_120ohm 0x1
+#define DDR_CDR_ODT_180ohm 0x2
+#define DDR_CDR_ODT_75ohm 0x3
+#define DDR_CDR_ODT_110ohm 0x4
+#define DDR_CDR_ODT_60hm 0x5
+#define DDR_CDR_ODT_70ohm 0x6
+#define DDR_CDR_ODT_47ohm 0x7
+#else
+#define DDR_CDR_ODT_75ohm 0x0
+#define DDR_CDR_ODT_55ohm 0x1
+#define DDR_CDR_ODT_60ohm 0x2
+#define DDR_CDR_ODT_50ohm 0x3
+#define DDR_CDR_ODT_150ohm 0x4
+#define DDR_CDR_ODT_43ohm 0x5
+#define DDR_CDR_ODT_120ohm 0x6
+#endif
/* Record of register values computed */
typedef struct fsl_ddr_cfg_regs_s {
@@ -177,6 +202,8 @@ typedef struct fsl_ddr_cfg_regs_s {
unsigned int timing_cfg_5;
unsigned int ddr_zq_cntl;
unsigned int ddr_wrlvl_cntl;
+ unsigned int ddr_wrlvl_cntl_2;
+ unsigned int ddr_wrlvl_cntl_3;
unsigned int ddr_sr_cntr;
unsigned int ddr_sdram_rcw_1;
unsigned int ddr_sdram_rcw_2;
@@ -262,6 +289,8 @@ typedef struct memctl_options_s {
unsigned int wrlvl_override;
unsigned int wrlvl_sample; /* Write leveling */
unsigned int wrlvl_start;
+ unsigned int wrlvl_ctl_2;
+ unsigned int wrlvl_ctl_3;
unsigned int half_strength_driver_enable;
unsigned int twoT_en;
@@ -288,6 +317,7 @@ typedef struct memctl_options_s {
unsigned int rcw_2;
/* control register 1 */
unsigned int ddr_cdr1;
+ unsigned int ddr_cdr2;
unsigned int trwt_override;
unsigned int trwt; /* read-to-write turnaround */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 20/28] powerpc/mpc8xxx: Fix DDR driver handling quad-rank DIMMs and address calculation
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (17 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 19/28] powerpc/mpc8xxx: Update DDR registers York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 21/28] powerpc/mpc8xxx: Fix DDR initialization waiting for D_INIT York Sun
` (7 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Fix handling quad-rank DIMMs in a system with two DIMM slots and first
slot supports both dual-rank DIMM and quad-rank DIMM.
For systems with quad-rank DIMM and double dual-rank DIMMs, cs_config
registers need to be enabled to maintain proper ODT operation. The
inactive CS should have bnds registers cleared.
Fix the turnaround timing for systems with all chip-selects enabled. This
wasn't an issue before because DDR was running lower than 1600MT/s with
this interleaving mode.
Fix DDR address calculation. It wasn't an issue until we have multiple
controllers with each more than 4GB and interleaving is disabled.
It also fixes the message of DDR: 2 GiB (DDR3, 64-bit, CL=0.5, ECC off)
when debugging DDR and first DDR controller is disabled. With the fix,
the first enabled controller information will be displayed.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 62 +++++++++++++++-----
.../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 16 ++++-
arch/powerpc/cpu/mpc8xxx/ddr/options.c | 12 ++++
arch/powerpc/cpu/mpc8xxx/ddr/util.c | 12 ++++
arch/powerpc/include/asm/fsl_ddr_sdram.h | 2 +
5 files changed, 87 insertions(+), 17 deletions(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index c28f9cd..5928eb8 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -229,6 +229,26 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
#if !defined(CONFIG_FSL_DDR1)
+static inline int avoid_odt_overlap(const dimm_params_t *dimm_params)
+{
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 1
+ if (dimm_params[0].n_ranks == 4)
+ return 1;
+#endif
+
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 2
+ if ((dimm_params[0].n_ranks == 2) &&
+ (dimm_params[1].n_ranks == 2))
+ return 1;
+
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (dimm_params[0].n_ranks == 4)
+ return 1;
+#endif
+#endif
+ return 0;
+}
+
/*
* DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
*
@@ -236,7 +256,8 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
* dreams up non-zero default values to be backwards compatible.
*/
static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
+ const memctl_options_t *popts,
+ const dimm_params_t *dimm_params)
{
unsigned char trwt_mclk = 0; /* Read-to-write turnaround */
unsigned char twrt_mclk = 0; /* Write-to-read turnaround */
@@ -266,7 +287,18 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
unsigned int data_rate = get_ddr_freq(0);
tmrd_mclk = 4;
/* set the turnaround time */
- trwt_mclk = 1;
+
+ /*
+ * for single quad-rank DIMM and two dual-rank DIMMs
+ * to avoid ODT overlap
+ */
+ if (avoid_odt_overlap(dimm_params)) {
+ twwt_mclk = 2;
+ trrt_mclk = 1;
+ }
+ /* for faster clock, need more time for data setup */
+ trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1;
+
if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving))
twrt_mclk = 1;
@@ -1483,7 +1515,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
break;
}
sa = common_dimm->base_address;
- ea = common_dimm->total_mem - 1;
+ ea = sa + common_dimm->total_mem - 1;
} else if (!popts->memctl_interleaving) {
/*
* If memory interleaving between controllers is NOT
@@ -1497,7 +1529,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
case FSL_DDR_CS0_CS1_CS2_CS3:
sa = common_dimm->base_address;
- ea = common_dimm->total_mem - 1;
+ ea = sa + common_dimm->total_mem - 1;
break;
case FSL_DDR_CS0_CS1_AND_CS2_CS3:
if ((i >= 2) && (dimm_number == 0)) {
@@ -1554,17 +1586,19 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
sa >>= 24;
ea >>= 24;
- ddr->cs[i].bnds = (0
- | ((sa & 0xFFF) << 16) /* starting address MSB */
- | ((ea & 0xFFF) << 0) /* ending address MSB */
- );
+ if (cs_en) {
+ ddr->cs[i].bnds = (0
+ | ((sa & 0xFFF) << 16)/* starting address MSB */
+ | ((ea & 0xFFF) << 0) /* ending address MSB */
+ );
+ } else {
+ debug("FSLDDR: setting bnds to 0 for inactive CS\n");
+ ddr->cs[i].bnds = 0;
+ }
debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
- if (cs_en) {
- set_csn_config(dimm_number, i, ddr, popts, dimm_params);
- set_csn_config_2(i, ddr);
- } else
- debug("CS%d is disabled.\n", i);
+ set_csn_config(dimm_number, i, ddr, popts, dimm_params);
+ set_csn_config_2(i, ddr);
}
/*
@@ -1577,7 +1611,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
set_ddr_eor(ddr, popts);
#if !defined(CONFIG_FSL_DDR1)
- set_timing_cfg_0(ddr, popts);
+ set_timing_cfg_0(ddr, popts, dimm_params);
#endif
set_timing_cfg_3(ddr, popts, common_dimm, cas_latency);
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 03a784c..6a1f4e4 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -76,7 +76,7 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
unsigned int
compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
- unsigned int number_of_dimms)
+ const unsigned int number_of_dimms)
{
unsigned int i, j;
@@ -126,13 +126,20 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
temp1++;
continue;
}
+
+ /*
+ * check if quad-rank DIMM is plugged if
+ * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined
+ * Only the board with proper design is capable
+ */
+#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
if (dimm_params[i].n_ranks == 4 && \
CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
printf("Found Quad-rank DIMM, not able to support.");
temp1++;
continue;
}
-
+#endif
/*
* Find minimum tCKmax_ps to find fastest slow speed,
* i.e., this is the slowest the whole system can go.
@@ -236,11 +243,14 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
if (outpdimm->all_DIMMs_registered)
for (j = 0; j < 16; j++) {
outpdimm->rcw[j] = dimm_params[0].rcw[j];
- for (i = 1; i < number_of_dimms; i++)
+ for (i = 1; i < number_of_dimms; i++) {
+ if (!dimm_params[i].n_ranks)
+ continue;
if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) {
temp1 = 1;
break;
}
+ }
}
if (temp1 != 0)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
index 13e4825..1188df9 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
@@ -510,6 +510,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
}
} else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
switch (pdimm[0].n_ranks) {
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ case 4:
+ pdodt = single_Q;
+ if (pdimm[1].n_ranks)
+ printf("Error: Quad- and Dual-rank DIMMs "
+ "cannot be used together\n");
+ break;
+#endif
case 2:
switch (pdimm[1].n_ranks) {
case 2:
@@ -912,6 +920,10 @@ done:
"interleaving disabled!\n", ctrl_num);
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (pdimm[0].n_ranks == 4)
+ break;
+#endif
if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for "
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index 664ad09..b439cc9 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -140,6 +140,18 @@ void board_add_ram_info(int use_default)
uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg);
int cas_lat;
+#if CONFIG_NUM_DDR_CONTROLLERS >= 2
+ if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+ ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+ sdram_cfg = in_be32(&ddr->sdram_cfg);
+ }
+#endif
+#if CONFIG_NUM_DDR_CONTROLLERS >= 3
+ if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+ ddr = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+ sdram_cfg = in_be32(&ddr->sdram_cfg);
+ }
+#endif
puts(" (DDR");
switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
SDRAM_CFG_SDRAM_TYPE_SHIFT) {
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index 9cf9bd4..bb79335 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -84,6 +84,8 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
#define FSL_DDR_4WAY_4KB_INTERLEAVING 0x1C
#define FSL_DDR_4WAY_8KB_INTERLEAVING 0x1D
+#define SDRAM_CS_CONFIG_EN 0x80000000
+
/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
*/
#define SDRAM_CFG_MEM_EN 0x80000000
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 21/28] powerpc/mpc8xxx: Fix DDR initialization waiting for D_INIT
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (18 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 20/28] powerpc/mpc8xxx: Fix DDR driver handling quad-rank DIMMs and address calculation York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 22/28] powerpc/mpc85xx: software workaround for DDR erratum A-004468 York Sun
` (6 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
When ECC is enabled, DDR controller needs to initialize the data and ecc.
The wait time can be calcuated with total memory size, bus width, bus speed
and interleaving mode. If it went wrong, it is bettert to timeout than
waiting for D_INIT to clear, where it probably hangs.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 80 +++++++++++++++++++++---------
arch/powerpc/cpu/mpc8xxx/ddr/main.c | 12 ++++-
arch/powerpc/cpu/mpc8xxx/ddr/util.c | 4 +-
arch/powerpc/include/asm/fsl_ddr_sdram.h | 2 +
4 files changed, 71 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index 088cf45..8bed5fe 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -18,12 +18,13 @@
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num)
{
- unsigned int i;
+ unsigned int i, bus_width;
volatile ccsr_ddr_t *ddr;
u32 temp_sdram_cfg;
+ u32 total_gb_size_per_controller;
+ int timeout, timeout_save;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
- u32 total_gb_size_per_controller;
unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
int csn = -1;
#endif
@@ -52,8 +53,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
return;
}
- out_be32(&ddr->eor, regs->ddr_eor);
-
+ if (regs->ddr_eor)
+ out_be32(&ddr->eor, regs->ddr_eor);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
debug("Workaround for ERRATUM_DDR111_DDR134\n");
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
@@ -275,9 +276,46 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
+ total_gb_size_per_controller = 0;
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (!(regs->cs[i].config & 0x80000000))
+ continue;
+ total_gb_size_per_controller += 1 << (
+ ((regs->cs[i].config >> 14) & 0x3) + 2 +
+ ((regs->cs[i].config >> 8) & 0x7) + 12 +
+ ((regs->cs[i].config >> 0) & 0x7) + 8 +
+ 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
+ 26); /* minus 26 (count of 64M) */
+ }
+ if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */
+ total_gb_size_per_controller *= 3;
+ else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
+ total_gb_size_per_controller <<= 1;
+ /*
+ * total memory / bus width = transactions needed
+ * transactions needed / data rate = seconds
+ * to add plenty of buffer, double the time
+ * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
+ * Let's wait for 800ms
+ */
+ bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
+ >> SDRAM_CFG_DBW_SHIFT);
+ timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
+ (get_ddr_freq(0) >> 20)) << 1;
+ timeout_save = timeout;
+ total_gb_size_per_controller >>= 4; /* shift down to gb size */
+ debug("total %d GB\n", total_gb_size_per_controller);
+ debug("Need to wait up to %d * 10ms\n", timeout);
+
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
+ while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+ (timeout >= 0)) {
udelay(10000); /* throttle polling rate */
+ timeout--;
+ }
+
+ if (timeout <= 0)
+ printf("Waiting for D_INIT timeout. Memory may not work.\n");
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
/* continue this workaround */
@@ -335,23 +373,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
while (in_be32(&ddr->debug[1]) & 0x400)
udelay(10000); /* throttle polling rate */
- /* 7. Wait for 400ms/GB */
- total_gb_size_per_controller = 0;
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == csn) {
- total_gb_size_per_controller +=
- ((csn_bnds_backup & 0xFFFF) >> 6)
- - (csn_bnds_backup >> 22) + 1;
- } else {
- total_gb_size_per_controller +=
- ((regs->cs[i].bnds & 0xFFFF) >> 6)
- - (regs->cs[i].bnds >> 22) + 1;
- }
- }
- if (in_be32(&ddr->sdram_cfg) & 0x80000)
- total_gb_size_per_controller <<= 1;
- debug("Wait for %d ms\n", total_gb_size_per_controller * 400);
- udelay(total_gb_size_per_controller * 400000);
+ /* 7. Wait for state machine 2nd run, roughly 400ms/GB */
+ debug("Wait for %d * 10ms\n", timeout_save);
+ udelay(timeout_save * 10000);
/* 8. Set sdram_cfg_2[dinit] if options requires */
setbits_be32(&ddr->sdram_cfg_2,
@@ -359,8 +383,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
/* 9. Poll until dinit is cleared */
- while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
- udelay(10000);
+ timeout = timeout_save;
+ debug("Need to wait up to %d * 10ms\n", timeout);
+ while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+ (timeout >= 0)) {
+ udelay(10000); /* throttle polling rate */
+ timeout--;
+ }
+
+ if (timeout <= 0)
+ printf("Waiting for D_INIT timeout. Memory may not work.\n");
/* 10. Clear EEBACR[3] */
clrbits_be32(&ecm->eebacr, 10000000);
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index b47268c..2885906 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -526,6 +526,17 @@ phys_size_t fsl_ddr_sdram(void)
#endif
total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
+ /* setup 3-way interleaving before enabling DDRC */
+ switch (info.memctl_opts[0].memctl_interleaving_mode) {
+ case FSL_DDR_3WAY_1KB_INTERLEAVING:
+ case FSL_DDR_3WAY_4KB_INTERLEAVING:
+ case FSL_DDR_3WAY_8KB_INTERLEAVING:
+ fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode);
+ break;
+ default:
+ break;
+ }
+
/* Program configuration registers. */
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
debug("Programming controller %u\n", i);
@@ -561,7 +572,6 @@ phys_size_t fsl_ddr_sdram(void)
case FSL_DDR_3WAY_8KB_INTERLEAVING:
law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
if (i == 0) {
- fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode);
fsl_ddr_set_lawbar(&info.common_timing_params[i],
law_memctl, i);
}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index b439cc9..afc5fae 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -142,13 +142,13 @@ void board_add_ram_info(int use_default)
#if CONFIG_NUM_DDR_CONTROLLERS >= 2
if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+ ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
sdram_cfg = in_be32(&ddr->sdram_cfg);
}
#endif
#if CONFIG_NUM_DDR_CONTROLLERS >= 3
if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+ ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
sdram_cfg = in_be32(&ddr->sdram_cfg);
}
#endif
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index bb79335..640d329 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -98,6 +98,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
#define SDRAM_CFG_DYN_PWR 0x00200000
#define SDRAM_CFG_DBW_MASK 0x00180000
+#define SDRAM_CFG_DBW_SHIFT 19
#define SDRAM_CFG_32_BE 0x00080000
#define SDRAM_CFG_16_BE 0x00100000
#define SDRAM_CFG_8_BE 0x00040000
@@ -330,6 +331,7 @@ extern phys_size_t fsl_ddr_sdram_size(void);
extern int fsl_use_spd(void);
extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num);
+u32 fsl_ddr_get_intl3r(void);
/*
* The 85xx boards have a common prototype for fixed_sdram so put the
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 22/28] powerpc/mpc85xx: software workaround for DDR erratum A-004468
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (19 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 21/28] powerpc/mpc8xxx: Fix DDR initialization waiting for D_INIT York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 23/28] powerpc/mpc85xx: Add workaround for DDR erratum A004934 York Sun
` (5 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Boot space translation utilizes the pre-translation address to select
the DDR controller target. However, the post-translation address will be
presented to the selected DDR controller. It is possible that the pre-
translation address selects one DDR controller but the post-translation
address exists in a different DDR controller when using certain DDR
controller interleaving modes. The device may fail to boot under these
circumstances. Note that a DDR MSE error will not be detected since DDR
controller bounds registers are programmed to be the same when configured
for DDR controller interleaving.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 +
arch/powerpc/cpu/mpc85xx/fdt.c | 2 +-
arch/powerpc/cpu/mpc85xx/mp.c | 96 ++++++++++++++++++++++++++---
arch/powerpc/cpu/mpc86xx/fdt.c | 2 +-
arch/powerpc/cpu/mpc86xx/mp.c | 9 ++-
arch/powerpc/cpu/mpc8xxx/ddr/util.c | 10 +++
arch/powerpc/include/asm/config_mpc85xx.h | 1 +
arch/powerpc/include/asm/mp.h | 2 +-
arch/powerpc/lib/board.c | 4 +-
9 files changed, 111 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index e8989bd..67508ff 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -76,6 +76,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111)
puts("Work-around for Erratum ESDHC111 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+ puts("Work-around for Erratum A004468 enabled\n");
+#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135)
puts("Work-around for Erratum ESDHC135 enabled\n");
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index d54527a..8221481 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -48,7 +48,7 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
{
int off;
ulong spin_tbl_addr = get_spin_phys_addr();
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
u32 id = get_my_id();
const char *enable_method;
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index ffc2a9a..39adf8e 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -27,9 +27,11 @@
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
+u32 fsl_ddr_get_intl3r(void);
u32 get_my_id()
{
@@ -191,13 +193,68 @@ int cpu_release(int nr, int argc, char * const argv[])
return 0;
}
-u32 determine_mp_bootpg(void)
+u32 determine_mp_bootpg(unsigned int *pagesize)
{
+ u32 bootpg;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+ u32 svr = get_svr();
+ u32 granule_size, check;
+ struct law_entry e;
+#endif
+
/* if we have 4G or more of memory, put the boot page at 4Gb-4k */
if ((u64)gd->ram_size > 0xfffff000)
- return (0xfffff000);
+ bootpg = 0xfffff000;
+ else
+ bootpg = gd->ram_size - 4096;
+ if (pagesize)
+ *pagesize = 4096;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+/*
+ * Erratum A004468 has two parts. The 3-way interleaving applies to T4240,
+ * to be fixed in rev 2.0. The 2-way interleaving applies to many SoCs. But
+ * the way boot page chosen in u-boot avoids hitting this erratum. So only
+ * thw workaround for 3-way interleaving is needed.
+ *
+ * To make sure boot page translation works with 3-Way DDR interleaving
+ * enforce a check for the following constrains
+ * 8K granule size requires BRSIZE=8K and
+ * bootpg >> log2(BRSIZE) %3 == 1
+ * 4K and 1K granule size requires BRSIZE=4K and
+ * bootpg >> log2(BRSIZE) %3 == 0
+ */
+ if (SVR_SOC_VER(svr) == SVR_T4240 && SVR_MAJ(svr) < 2) {
+ e = find_law(bootpg);
+ switch (e.trgt_id) {
+ case LAW_TRGT_IF_DDR_INTLV_123:
+ granule_size = fsl_ddr_get_intl3r() & 0x1f;
+ if (granule_size == FSL_DDR_3WAY_8KB_INTERLEAVING) {
+ if (pagesize)
+ *pagesize = 8192;
+ bootpg &= 0xffffe000; /* align to 8KB */
+ check = bootpg >> 13;
+ while ((check % 3) != 1)
+ check--;
+ bootpg = check << 13;
+ debug("Boot page (8K)@0x%08x\n", bootpg);
+ break;
+ } else {
+ bootpg &= 0xfffff000; /* align to 4KB */
+ check = bootpg >> 12;
+ while ((check % 3) != 0)
+ check--;
+ bootpg = check << 12;
+ debug("Boot page (4K)@0x%08x\n", bootpg);
+ }
+ break;
+ default:
+ break;
+ }
+ }
+#endif /* CONFIG_SYS_FSL_ERRATUM_A004468 */
- return (gd->ram_size - 4096);
+ return bootpg;
}
ulong get_spin_phys_addr(void)
@@ -219,9 +276,9 @@ ulong get_spin_virt_addr(void)
}
#ifdef CONFIG_FSL_CORENET
-static void plat_mp_up(unsigned long bootpg)
+static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
{
- u32 cpu_up_mask, whoami;
+ u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K;
u32 *table = (u32 *)get_spin_virt_addr();
volatile ccsr_gur_t *gur;
volatile ccsr_local_t *ccm;
@@ -241,7 +298,11 @@ static void plat_mp_up(unsigned long bootpg)
out_be32(&ccm->bstrl, bootpg);
e = find_law(bootpg);
- out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
+ /* pagesize is only 4K or 8K */
+ if (pagesize == 8192)
+ brsize = LAW_SIZE_8K;
+ out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | brsize);
+ debug("BRSIZE is 0x%x\n", brsize);
/* readback to sync write */
in_be32(&ccm->bstrar);
@@ -294,7 +355,7 @@ static void plat_mp_up(unsigned long bootpg)
#endif
}
#else
-static void plat_mp_up(unsigned long bootpg)
+static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
{
u32 up, cpu_up_mask, whoami;
u32 *table = (u32 *)get_spin_virt_addr();
@@ -374,7 +435,7 @@ static void plat_mp_up(unsigned long bootpg)
void cpu_mp_lmb_reserve(struct lmb *lmb)
{
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
lmb_reserve(lmb, bootpg, 4096);
}
@@ -383,8 +444,23 @@ void setup_mp(void)
{
extern ulong __secondary_start_page;
extern ulong __bootpg_addr;
+
ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg, bootpg_map, pagesize;
+
+ bootpg = determine_mp_bootpg(&pagesize);
+
+ /*
+ * pagesize is only 4K or 8K
+ * we only use the last 4K of boot page
+ * bootpg_map saves the address for the boot page
+ * 8K is used for the workaround of 3-way DDR interleaving
+ */
+
+ bootpg_map = bootpg;
+
+ if (pagesize == 8192)
+ bootpg += 4096; /* use 2nd half */
/* Some OSes expect secondary cores to be held in reset */
if (hold_cores_in_reset(0))
@@ -407,7 +483,7 @@ void setup_mp(void)
memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
- plat_mp_up(bootpg);
+ plat_mp_up(bootpg_map, pagesize);
} else {
puts("WARNING: No reset page TLB. "
"Skipping secondary core setup\n");
diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c
index 61f5110..2f955fe 100644
--- a/arch/powerpc/cpu/mpc86xx/fdt.c
+++ b/arch/powerpc/cpu/mpc86xx/fdt.c
@@ -20,7 +20,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_MP
int off;
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c
index 30c99eb..de705f0 100644
--- a/arch/powerpc/cpu/mpc86xx/mp.c
+++ b/arch/powerpc/cpu/mpc86xx/mp.c
@@ -90,8 +90,11 @@ int cpu_release(int nr, int argc, char * const argv[])
return 1;
}
-u32 determine_mp_bootpg(void)
+u32 determine_mp_bootpg(unsigned int *pagesize)
{
+ if (pagesize)
+ *pagesize = 4096;
+
/* if we have 4G or more of memory, put the boot page at 4Gb-1M */
if ((u64)gd->ram_size > 0xfffff000)
return (0xfff00000);
@@ -101,7 +104,7 @@ u32 determine_mp_bootpg(void)
void cpu_mp_lmb_reserve(struct lmb *lmb)
{
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
/* tell u-boot we stole a page */
lmb_reserve(lmb, bootpg, 4096);
@@ -115,7 +118,7 @@ void setup_mp(void)
{
extern ulong __secondary_start_page;
ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
u32 bootpg_va;
if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) {
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index afc5fae..940ffff 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -121,6 +121,16 @@ void fsl_ddr_set_intl3r(const unsigned int granule_size)
#endif
}
+u32 fsl_ddr_get_intl3r(void)
+{
+ u32 val = 0;
+#ifdef CONFIG_E6500
+ u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
+ val = *mcintl3r;
+#endif
+ return val;
+}
+
void board_add_ram_info(int use_default)
{
#if defined(CONFIG_MPC83xx)
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 65c82bb..225d620 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -478,6 +478,7 @@
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_A004468
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#elif defined(CONFIG_PPC_B4860)
diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h
index fe490ba..9188ede 100644
--- a/arch/powerpc/include/asm/mp.h
+++ b/arch/powerpc/include/asm/mp.h
@@ -25,7 +25,7 @@
void setup_mp(void);
void cpu_mp_lmb_reserve(struct lmb *lmb);
-u32 determine_mp_bootpg(void);
+u32 determine_mp_bootpg(unsigned int *pagesize);
int is_core_disabled(int nr);
#ifdef CONFIG_E6500
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 07feaf5..2f35bda 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -440,8 +440,8 @@ void board_init_f(ulong bootflag)
* We need to make sure the location we intend to put secondary core
* boot code is reserved and not used by any part of u-boot
*/
- if (addr > determine_mp_bootpg()) {
- addr = determine_mp_bootpg();
+ if (addr > determine_mp_bootpg(NULL)) {
+ addr = determine_mp_bootpg(NULL);
debug("Reserving MP boot page to %08lx\n", addr);
}
#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 23/28] powerpc/mpc85xx: Add workaround for DDR erratum A004934
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (20 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 22/28] powerpc/mpc85xx: software workaround for DDR erratum A-004468 York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 24/28] powerpc/mpc8xxx: Add auto select bank interleaving mode York Sun
` (4 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
After DDR controller is enabled, it performs a calibration for the
transmit data vs DQS paths. During this calibration, the DDR controller
may make an inaccurate calculation, resulting in a non-optimal tap point.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 +++
arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 3 +++
arch/powerpc/include/asm/config_mpc85xx.h | 1 +
3 files changed, 7 insertions(+)
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 67508ff..4b62651 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -130,6 +130,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
puts("Work-around for Erratum A004510 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+ puts("Work-around for Erratum A004934 enabled\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index 8bed5fe..21840bf 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -140,6 +140,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->debug[i], regs->debug[i]);
}
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+ out_be32(&ddr->debug[28], 0x00003000);
+#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
out_be32(&ddr->debug[12], 0x00000015);
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 225d620..0bbbf30 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -479,6 +479,7 @@
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_A004468
+#define CONFIG_SYS_FSL_ERRATUM_A_004934
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#elif defined(CONFIG_PPC_B4860)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 24/28] powerpc/mpc8xxx: Add auto select bank interleaving mode
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (21 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 23/28] powerpc/mpc85xx: Add workaround for DDR erratum A004934 York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 25/28] powerpc/mpc8xxx: Fix DDR SPD failed message York Sun
` (3 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Based on populated DIMMs, automatically select from cs0_cs1_cs2_cs3 or
cs0_cs1 interleaving, or non-interleaving if not available.
Fix the message of interleaving disabled if controller interleaving
is enabled but DIMMs don't support it.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc8xxx/ddr/options.c | 33 +++++++++++++++++++++++++++++++-
doc/README.fsl-ddr | 5 +++++
2 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
index 1188df9..2f13b8f 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
@@ -474,6 +474,34 @@ static const struct dynamic_odt odt_unknown[4] = {
}
};
#endif
+
+/*
+ * Automatically seleect bank interleaving mode based on DIMMs
+ * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
+ * This function only deal with one or two slots per controller.
+ */
+static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
+{
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+ if (pdimm[0].n_ranks == 4)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+ else if (pdimm[0].n_ranks == 2)
+ return FSL_DDR_CS0_CS1;
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (pdimm[0].n_ranks == 4)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+#endif
+ if (pdimm[0].n_ranks == 2) {
+ if (pdimm[1].n_ranks == 2)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+ else
+ return FSL_DDR_CS0_CS1;
+ }
+#endif
+ return 0;
+}
+
unsigned int populate_memctl_options(int all_DIMMs_registered,
memctl_options_t *popts,
dimm_params_t *pdimm,
@@ -908,6 +936,9 @@ done:
else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
"cs0_cs1_cs2_cs3", buf))
popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+ "auto", buf))
+ popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
else
printf("hwconfig has unrecognized parameter for bank_intlv.\n");
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
@@ -1075,7 +1106,7 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo)
break;
}
debug("%d of %d controllers are interleaving.\n", j, k);
- if (j != k) {
+ if (j && (j != k)) {
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
pinfo->memctl_opts[i].memctl_interleaving = 0;
printf("Not all controllers have compatible "
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
index f94b56f..3992640 100644
--- a/doc/README.fsl-ddr
+++ b/doc/README.fsl-ddr
@@ -103,6 +103,11 @@ The ways to configure the ddr interleaving mode
# bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3"
+ # bank(chip-select) interleaving (auto)
+ setenv hwconfig "fsl_ddr:bank_intlv=auto"
+ This auto mode only select from cs0_cs1_cs2_cs3, cs0_cs1, null dependings
+ on DIMMs.
+
Memory controller address hashing
==================================
If the DDR controller supports address hashing, it can be enabled by hwconfig.
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 25/28] powerpc/mpc8xxx: Fix DDR SPD failed message
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (22 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 24/28] powerpc/mpc8xxx: Add auto select bank interleaving mode York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 26/28] powerpc/mpc85xx: Remove R6 from spin table York Sun
` (2 subsequent siblings)
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Since empty DIMM slot is allowed on other than the first slot, remove the
error message if SPD is not found in this case.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc8xxx/ddr/main.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index 2885906..d6b73c7 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -77,7 +77,19 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
sizeof(generic_spd_eeprom_t));
if (ret) {
- printf("DDR: failed to read SPD from address %u\n", i2c_address);
+ if (i2c_address ==
+#ifdef SPD_EEPROM_ADDRESS
+ SPD_EEPROM_ADDRESS
+#elif defined(SPD_EEPROM_ADDRESS1)
+ SPD_EEPROM_ADDRESS1
+#endif
+ ) {
+ printf("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ } else {
+ debug("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ }
memset(spd, 0, sizeof(generic_spd_eeprom_t));
}
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 26/28] powerpc/mpc85xx: Remove R6 from spin table
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (23 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 25/28] powerpc/mpc8xxx: Fix DDR SPD failed message York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 27/28] powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1 York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 28/28] powerpc/mpc85xx: Add CONFIG_DDR_CLK_FREQ for corenet platform York Sun
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
R6 was in ePAPR draft version but was dropped in official spec.
Removing it to comply.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/mp.c | 8 +++-----
arch/powerpc/cpu/mpc85xx/release.S | 2 +-
2 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 39adf8e..881b681 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -86,9 +86,8 @@ int cpu_status(int nr)
printf("\n");
printf("table @ 0x%p\n", table);
printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
- printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
- printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
+ printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
}
return 0;
@@ -151,7 +150,6 @@ static u8 boot_entry_map[4] = {
0,
BOOT_ENTRY_PIR,
BOOT_ENTRY_R3_LOWER,
- BOOT_ENTRY_R6_LOWER,
};
int cpu_release(int nr, int argc, char * const argv[])
@@ -174,8 +172,8 @@ int cpu_release(int nr, int argc, char * const argv[])
boot_addr = simple_strtoull(argv[0], NULL, 16);
- /* handle pir, r3, r6 */
- for (i = 1; i < 4; i++) {
+ /* handle pir, r3 */
+ for (i = 1; i < 3; i++) {
if (argv[i][0] != '-') {
u8 entry = boot_entry_map[i];
val = simple_strtoul(argv[i], NULL, 16);
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index d9061c3..7315259 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -366,7 +366,7 @@ __secondary_start_page:
lwz r3,ENTRY_R3_LOWER(r10)
li r4,0
li r5,0
- lwz r6,ENTRY_R6_LOWER(r10)
+ li r6,0
lis r7,(64*1024*1024)@h
li r8,0
li r9,0
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 27/28] powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (24 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 26/28] powerpc/mpc85xx: Remove R6 from spin table York Sun
@ 2012-10-08 17:44 ` York Sun
2012-10-24 1:40 ` Scott Wood
2012-10-08 17:44 ` [U-Boot] [PATCH 28/28] powerpc/mpc85xx: Add CONFIG_DDR_CLK_FREQ for corenet platform York Sun
26 siblings, 1 reply; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
Move spin table to cached memory to comply with ePAPR v1.1.
Load R3 with 64-bit value if CONFIG_SYS_PPC64 is defined.
'M' bit is set for DDR TLB to maintain cache coherence.
See details in doc/README.mpc85xx-spin-table.
Signed-off-by: York Sun <yorksun@freescale.com>
---
README | 6 +
arch/powerpc/cpu/mpc85xx/fdt.c | 13 ++-
arch/powerpc/cpu/mpc85xx/mp.c | 61 +++++-----
arch/powerpc/cpu/mpc85xx/mp.h | 5 +-
arch/powerpc/cpu/mpc85xx/release.S | 179 +++++++++++++++++------------
arch/powerpc/cpu/mpc85xx/tlb.c | 2 +-
arch/powerpc/include/asm/config_mpc85xx.h | 3 +
doc/README.mpc85xx-spin-table | 26 +++++
8 files changed, 183 insertions(+), 112 deletions(-)
create mode 100644 doc/README.mpc85xx-spin-table
diff --git a/README b/README
index af76b0c..74324d2 100644
--- a/README
+++ b/README
@@ -363,6 +363,12 @@ The following options need to be configured:
ICache only when Code runs from RAM.
- 85xx CPU Options:
+ CONFIG_SYS_PPC64
+
+ Specifies that the core is a 64-bit PowerPC implementation (implements
+ the "64" category of the Power ISA). This is necessary for ePAPR
+ compliance, among other possible reasons.
+
CONFIG_SYS_FSL_TBCLK_DIV
Defines the core time base clock divider ratio compared to the
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 8221481..a364ef2 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -47,7 +47,7 @@ extern void ft_srio_setup(void *blob);
void ft_fixup_cpu(void *blob, u64 memory_limit)
{
int off;
- ulong spin_tbl_addr = get_spin_phys_addr();
+ phys_addr_t spin_tbl_addr = get_spin_phys_addr();
u32 bootpg = determine_mp_bootpg(NULL);
u32 id = get_my_id();
const char *enable_method;
@@ -97,7 +97,16 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
if ((u64)bootpg < memory_limit) {
off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
if (off < 0)
- printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
+ printf("Failed to reserve memory for bootpg: %s\n",
+ fdt_strerror(off));
+ }
+ /* Reserve spin table page */
+ if (spin_tbl_addr < memory_limit) {
+ off = fdt_add_mem_rsv(blob,
+ (spin_tbl_addr & ~0xffful), 4096);
+ if (off < 0)
+ printf("Failed to reserve memory for spin table: %s\n",
+ fdt_strerror(off));
}
}
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 881b681..e1197ac 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -33,6 +33,8 @@
DECLARE_GLOBAL_DATA_PTR;
u32 fsl_ddr_get_intl3r(void);
+extern u32 __spin_table[];
+
u32 get_my_id()
{
return mfspr(SPRN_PIR);
@@ -78,10 +80,10 @@ int cpu_status(int nr)
return 0;
if (nr == id) {
- table = (u32 *)get_spin_virt_addr();
+ table = (u32 *)&__spin_table;
printf("table base @ 0x%p\n", table);
} else {
- table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
printf("Running on cpu %d\n", id);
printf("\n");
printf("table @ 0x%p\n", table);
@@ -154,7 +156,7 @@ static u8 boot_entry_map[4] = {
int cpu_release(int nr, int argc, char * const argv[])
{
- u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ u32 i, val, *table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
u64 boot_addr;
if (hold_cores_in_reset(1))
@@ -200,11 +202,11 @@ u32 determine_mp_bootpg(unsigned int *pagesize)
struct law_entry e;
#endif
- /* if we have 4G or more of memory, put the boot page@4Gb-4k */
- if ((u64)gd->ram_size > 0xfffff000)
- bootpg = 0xfffff000;
- else
- bootpg = gd->ram_size - 4096;
+
+ /* use last 4K of mapped memory */
+ bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
+ CONFIG_MAX_MEM_MAPPED : gd->ram_size) +
+ CONFIG_SYS_SDRAM_BASE - 4096;
if (pagesize)
*pagesize = 4096;
@@ -255,29 +257,16 @@ u32 determine_mp_bootpg(unsigned int *pagesize)
return bootpg;
}
-ulong get_spin_phys_addr(void)
-{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
-
- return (determine_mp_bootpg() +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
-}
-
-ulong get_spin_virt_addr(void)
+phys_addr_t get_spin_phys_addr(void)
{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
-
- return (CONFIG_BPTR_VIRT_ADDR +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
+ return virt_to_phys(&__spin_table);
}
#ifdef CONFIG_FSL_CORENET
static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
{
u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K;
- u32 *table = (u32 *)get_spin_virt_addr();
+ u32 *table = (u32 *)&__spin_table;
volatile ccsr_gur_t *gur;
volatile ccsr_local_t *ccm;
volatile ccsr_rcpm_t *rcpm;
@@ -356,7 +345,7 @@ static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
{
u32 up, cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
+ u32 *table = (u32 *)&__spin_table;
volatile u32 bpcr;
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -440,10 +429,11 @@ void cpu_mp_lmb_reserve(struct lmb *lmb)
void setup_mp(void)
{
- extern ulong __secondary_start_page;
- extern ulong __bootpg_addr;
+ extern u32 __secondary_start_page;
+ extern u32 __bootpg_addr, __spin_table_addr, __second_half_boot_page;
- ulong fixup = (ulong)&__secondary_start_page;
+ int i;
+ ulong fixup = (u32)&__secondary_start_page;
u32 bootpg, bootpg_map, pagesize;
bootpg = determine_mp_bootpg(&pagesize);
@@ -464,11 +454,20 @@ void setup_mp(void)
if (hold_cores_in_reset(0))
return;
- /* Store the bootpg's SDRAM address for use by secondary CPU cores */
- __bootpg_addr = bootpg;
+ /*
+ * Store the bootpg's cache-able half address for use by secondary
+ * CPU cores to continue to boot
+ */
+ __bootpg_addr = (u32)virt_to_phys(&__second_half_boot_page);
+
+ /* Store spin table's physical address for use by secondary cores */
+ __spin_table_addr = (u32)get_spin_phys_addr();
+
+ /* flush bootpg it before copying invalidate any staled cacheline */
+ flush_cache(bootpg, 4096);
/* look for the tlb covering the reset page, there better be one */
- int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
+ i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
/* we found a match */
if (i != -1) {
diff --git a/arch/powerpc/cpu/mpc85xx/mp.h b/arch/powerpc/cpu/mpc85xx/mp.h
index 87bac37..ad9950b 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.h
+++ b/arch/powerpc/cpu/mpc85xx/mp.h
@@ -3,8 +3,7 @@
#include <asm/mp.h>
-ulong get_spin_phys_addr(void);
-ulong get_spin_virt_addr(void);
+phys_addr_t get_spin_phys_addr(void);
u32 get_my_id(void);
int hold_cores_in_reset(int verbose);
@@ -16,7 +15,7 @@ int hold_cores_in_reset(int verbose);
#define BOOT_ENTRY_PIR 5
#define BOOT_ENTRY_R6_UPPER 6
#define BOOT_ENTRY_R6_LOWER 7
-#define NUM_BOOT_ENTRY 8
+#define NUM_BOOT_ENTRY 16 /* pad to 64 bytes */
#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 7315259..da99f6f 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -150,10 +150,14 @@ __secondary_start_page:
#define toreset(x) (x - __secondary_start_page + 0xfffff000)
/* get our PIR to figure out our table entry */
- lis r3,toreset(__spin_table)@h
- ori r3,r3,toreset(__spin_table)@l
+ lis r3,toreset(__spin_table_addr)@h
+ ori r3,r3,toreset(__spin_table_addr)@l
+ lwz r3,0(r3)
- /* r10 has the base address for the entry */
+ /*
+ * r10 has the base address for the entry.
+ * we cannot access it yet before setting up a new TLB
+ */
mfspr r0,SPRN_PIR
#if defined(CONFIG_E6500)
/*
@@ -180,7 +184,7 @@ __secondary_start_page:
#else
mr r4,r0
#endif
- slwi r8,r4,5
+ slwi r8,r4,6 /* spin table is padded to 64 byte */
add r10,r3,r8
#ifdef CONFIG_E6500
@@ -277,73 +281,111 @@ __secondary_start_page:
beq 2b
#endif
3:
-
-#define EPAPR_MAGIC (0x45504150)
-#define ENTRY_ADDR_UPPER 0
-#define ENTRY_ADDR_LOWER 4
-#define ENTRY_R3_UPPER 8
-#define ENTRY_R3_LOWER 12
-#define ENTRY_RESV 16
-#define ENTRY_PIR 20
-#define ENTRY_R6_UPPER 24
-#define ENTRY_R6_LOWER 28
-#define ENTRY_SIZE 32
-
- /* setup the entry */
- li r3,0
- li r8,1
- stw r4,ENTRY_PIR(r10)
- stw r3,ENTRY_ADDR_UPPER(r10)
- stw r8,ENTRY_ADDR_LOWER(r10)
- stw r3,ENTRY_R3_UPPER(r10)
- stw r4,ENTRY_R3_LOWER(r10)
- stw r3,ENTRY_R6_UPPER(r10)
- stw r3,ENTRY_R6_LOWER(r10)
-
- /* load r13 with the address of the 'bootpg' in SDRAM */
- lis r13,toreset(__bootpg_addr)@h
- ori r13,r13,toreset(__bootpg_addr)@l
+ /* setup mapping for the spin table, WIMGE=0b00100 */
+ lis r13,toreset(__spin_table_addr)@h
+ ori r13,r13,toreset(__spin_table_addr)@l
lwz r13,0(r13)
+ /* mask by 4K */
+ rlwinm r13,r13,0,0,19
- /* setup mapping for AS = 1, and jump there */
lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
mtspr SPRN_MAS0,r11
lis r11,(MAS1_VALID|MAS1_IPROT)@h
ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
mtspr SPRN_MAS1,r11
- oris r11,r13,(MAS2_I|MAS2_G)@h
- ori r11,r13,(MAS2_I|MAS2_G)@l
+ oris r11,r13,(MAS2_M|MAS2_G)@h
+ ori r11,r13,(MAS2_M|MAS2_G)@l
mtspr SPRN_MAS2,r11
oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
mtspr SPRN_MAS3,r11
+ li r11,0
+ mtspr SPRN_MAS7,r11
tlbwe
- bl 1f
-1: mflr r11
/*
- * OR in 0xfff to create a mask of the bootpg SDRAM address. We use
- * this mask to fixup the cpu spin table and the address that we want
- * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
- * bootpg is at 0x7ffff000 in SDRAM.
+ * __bootpg_addr has the address of __second_half_boot_page
+ * jump there in AS=1 space with cache enabled
*/
- ori r13,r13,0xfff
- and r11, r11, r13
- and r10, r10, r13
-
- addi r11,r11,(2f-1b)
+ lis r13,toreset(__bootpg_addr)@h
+ ori r13,r13,toreset(__bootpg_addr)@l
+ lwz r11,0(r13)
+ mtspr SPRN_SRR0,r11
mfmsr r13
ori r12,r13,MSR_IS|MSR_DS at l
-
- mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
rfi
+ /*
+ * Allocate some space for the SDRAM address of the bootpg.
+ * This variable has to be in the boot page so that it can
+ * be accessed by secondary cores when they come out of reset.
+ */
+ .align L1_CACHE_SHIFT
+ .globl __bootpg_addr
+__bootpg_addr:
+ .long 0
+
+ .global __spin_table_addr
+__spin_table_addr:
+ .long 0
+
+ /*
+ * This variable is set by cpu_init_r() after parsing hwconfig
+ * to enable workaround for erratum NMG_CPU_A011.
+ */
+ .align L1_CACHE_SHIFT
+ .global enable_cpu_a011_workaround
+enable_cpu_a011_workaround:
+ .long 1
+
+ /* Fill in the empty space. The actual reset vector is
+ * the last word of the page */
+__secondary_start_code_end:
+ .space 4092 - (__secondary_start_code_end - __secondary_start_page)
+__secondary_reset_vector:
+ b __secondary_start_page
+
+
+/* this is a separated page for the spin table and cacheable boot code */
+ .align L1_CACHE_SHIFT
+ .global __second_half_boot_page
+__second_half_boot_page:
+#define EPAPR_MAGIC 0x45504150
+#define ENTRY_ADDR_UPPER 0
+#define ENTRY_ADDR_LOWER 4
+#define ENTRY_R3_UPPER 8
+#define ENTRY_R3_LOWER 12
+#define ENTRY_RESV 16
+#define ENTRY_PIR 20
+#define ENTRY_SIZE 64
+ /*
+ * setup the entry
+ * r10 has the base address of the spin table.
+ * spin table is defined as
+ * struct {
+ * uint64_t entry_addr;
+ * uint64_t r3;
+ * uint32_t rsvd1;
+ * uint32_t pir;
+ * };
+ * we pad this struct to 64 bytes so each entry is in its own cacheline
+ */
+ li r3,0
+ li r8,1
+ mfspr r4,SPRN_PIR
+ stw r3,ENTRY_ADDR_UPPER(r10)
+ stw r3,ENTRY_R3_UPPER(r10)
+ stw r4,ENTRY_R3_LOWER(r10)
+ stw r3,ENTRY_RESV(r10)
+ stw r4,ENTRY_PIR(r10)
+ msync
+ stw r8,ENTRY_ADDR_LOWER(r10)
+
/* spin waiting for addr */
-2:
- lwz r4,ENTRY_ADDR_LOWER(r10)
+3: lwz r4,ENTRY_ADDR_LOWER(r10)
andi. r11,r4,1
- bne 2b
+ bne 3b
isync
/* setup IVORs to match fixed offsets */
@@ -362,8 +404,17 @@ __secondary_start_page:
/* mask by ~64M to setup our tlb we will jump to */
rlwinm r12,r4,0,0,5
- /* setup r3, r4, r5, r6, r7, r8, r9 */
+ /*
+ * setup r3, r4, r5, r6, r7, r8, r9
+ * r3 contains the value to put in the r3 register at secondary cpu
+ * entry. The high 32-bits are ignored on 32-bit chip implementations.
+ * 64-bit chip implementations however shall load all 64-bits
+ */
+#ifdef CONFIG_SYS_PPC64
+ ld r3,ENTRY_R3_UPPER(r10)
+#else
lwz r3,ENTRY_R3_LOWER(r10)
+#endif
li r4,0
li r5,0
li r6,0
@@ -404,32 +455,10 @@ __secondary_start_page:
mtspr SPRN_SRR1,r13
rfi
- /*
- * Allocate some space for the SDRAM address of the bootpg.
- * This variable has to be in the boot page so that it can
- * be accessed by secondary cores when they come out of reset.
- */
- .globl __bootpg_addr
-__bootpg_addr:
- .long 0
- .align L1_CACHE_SHIFT
+ .align 6
.globl __spin_table
__spin_table:
.space CONFIG_MAX_CPUS*ENTRY_SIZE
-
- /*
- * This variable is set by cpu_init_r() after parsing hwconfig
- * to enable workaround for erratum NMG_CPU_A011.
- */
- .align L1_CACHE_SHIFT
- .global enable_cpu_a011_workaround
-enable_cpu_a011_workaround:
- .long 1
-
- /* Fill in the empty space. The actual reset vector is
- * the last word of the page */
-__secondary_start_code_end:
- .space 4092 - (__secondary_start_code_end - __secondary_start_page)
-__secondary_reset_vector:
- b __secondary_start_page
+__spin_table_end:
+ .space 4096 - (__spin_table_end - __spin_table)
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index 929f6a6..a548dec 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -249,7 +249,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
{
int i;
unsigned int tlb_size;
- unsigned int wimge = 0;
+ unsigned int wimge = MAS2_M;
unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
unsigned int max_cam;
u64 size, memsize = (u64)memsize_in_meg << 20;
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 0bbbf30..37683dd 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -413,6 +413,7 @@
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
#elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
+#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
@@ -452,6 +453,7 @@
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#elif defined(CONFIG_PPC_T4240)
+#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
@@ -483,6 +485,7 @@
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#elif defined(CONFIG_PPC_B4860)
+#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
diff --git a/doc/README.mpc85xx-spin-table b/doc/README.mpc85xx-spin-table
new file mode 100644
index 0000000..8da768a
--- /dev/null
+++ b/doc/README.mpc85xx-spin-table
@@ -0,0 +1,26 @@
+Spin table in cache
+=====================================
+As specified by ePAPR v1.1, the spin table needs to be in cached memory. After
+DDR is initialized and U-boot relocates itself into DDR, the spin table is
+accessible for core 0. It is part of release.S, within 4KB range after
+__secondary_start_page. For other cores to use the spin table, the booting
+process is described below:
+
+Core 0 sets up the reset page on the top 4K of memory (or 4GB if total memory
+is more than 4GB), and creates a TLB to map it to 0xffff_f000, regardless of
+the physical address of this page, with WIMGE=0b01010. Core 0 also enables boot
+page translation for secondary cores to use this page of memory. Then 4KB
+memory is copied from __secondary_start_page to the boot page, after flusing
+cache because this page is mapped as normal DDR. Before copying the reset page,
+core 0 puts the physical address of the spin table (which is in release.S and
+relocated to the top of mapped memory) into a variable __spin_table_addr so
+that secondary cores can see it.
+
+When secondary cores boot up from 0xffff_f000 page, they only have one default
+TLB. While booting, they set up another TLB in AS=1 space and jump into
+the new space. The new TLB covers the physical address of the spin table page,
+with WIMGE =0b00100. Now secondary cores can keep polling the spin table
+without stress DDR bus because both the code and the spin table is in cache.
+
+For the above to work, DDR has to set the 'M' bit of WIMGE, in order to keep
+cache coherence.
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 28/28] powerpc/mpc85xx: Add CONFIG_DDR_CLK_FREQ for corenet platform
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
` (25 preceding siblings ...)
2012-10-08 17:44 ` [U-Boot] [PATCH 27/28] powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1 York Sun
@ 2012-10-08 17:44 ` York Sun
26 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-08 17:44 UTC (permalink / raw)
To: u-boot
New corenet platforms with chassis2 have separated DDR clock inputs. Use
CONFIG_DDR_CLK_FREQ for DDR clock. This patch also cleans up the logic of
detecting and displaying synchronous vs asynchronous mode.
Signed-off-by: York Sun <yorksun@freescale.com>
---
arch/powerpc/cpu/mpc85xx/cpu.c | 26 ++++++++++++++++----------
arch/powerpc/cpu/mpc85xx/speed.c | 4 ++++
2 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 95f435e..24a572c 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -60,26 +60,32 @@ int checkcpu (void)
uint major, minor;
struct cpu_type *cpu;
char buf1[32], buf2[32];
-#if defined(CONFIG_DDR_CLK_FREQ) || \
- (defined(CONFIG_FSL_CORENET) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2))
+#if (defined(CONFIG_DDR_CLK_FREQ) || \
+ defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif /* CONFIG_FSL_CORENET */
-#ifdef CONFIG_DDR_CLK_FREQ
- u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
- >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-#else
+
+ /*
+ * Cornet platforms use ddr sync bit in RCW to indicate sync vs async
+ * mode. Previous platform use ddr ratio to do the same. This
+ * information is only for display here.
+ */
#ifdef CONFIG_FSL_CORENET
- u32 ddr_sync ;
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
- ddr_sync = 0; /* only async mode is supported */
+ u32 ddr_sync = 0; /* only async mode is supported */
#else
- ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
+ u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#else /* CONFIG_FSL_CORENET */
+#ifdef CONFIG_DDR_CLK_FREQ
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
#else
u32 ddr_ratio = 0;
-#endif /* CONFIG_FSL_CORENET */
#endif /* CONFIG_DDR_CLK_FREQ */
+#endif /* CONFIG_FSL_CORENET */
+
unsigned int i, core, nr_cores = cpu_numcores();
u32 mask = cpu_mask();
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 761441f..8bbf0bc 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -82,7 +82,11 @@ void get_sys_info (sys_info_t * sysInfo)
uint mem_pll_rat;
sysInfo->freqSystemBus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+ sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ;
+#else
sysInfo->freqDDRBus = sysclk;
+#endif
sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
--
1.7.9.5
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 04/28] powerpc/mpc85xx: Introduce new macros to add and delete TLB entries
2012-10-08 17:44 ` [U-Boot] [PATCH 04/28] powerpc/mpc85xx: Introduce new macros to add and delete TLB entries York Sun
@ 2012-10-22 9:14 ` Andy Fleming
2012-10-22 16:16 ` York Sun
0 siblings, 1 reply; 31+ messages in thread
From: Andy Fleming @ 2012-10-22 9:14 UTC (permalink / raw)
To: u-boot
This is causing a bunch of non QorIQ boards to stop building. Please
investigate:
$ ./MAKEALL MPC8548CDS
Configuring for MPC8548CDS board...
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: bad expression
start.S:300: Error: bad expression
start.S:300: Error: missing ')'
start.S:300: Error: missing ')'
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: bad expression
start.S:300: Error: bad expression
start.S:300: Error: missing ')'
start.S:300: Error: missing ')'
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: bad expression
start.S:300: Error: bad expression
start.S:300: Error: missing ')'
start.S:300: Error: missing ')'
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: bad expression
start.S:300: Error: bad expression
start.S:300: Error: missing ')'
start.S:300: Error: missing ')'
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: bad expression
start.S:300: Error: bad expression
start.S:300: Error: missing ')'
start.S:300: Error: missing ')'
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: bad expression
start.S:300: Error: bad expression
start.S:300: Error: missing ')'
start.S:300: Error: missing ')'
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: bad expression
start.S:300: Error: syntax error; found `h', expected `,'
start.S:300: Error: junk at end of line: `h'
start.S:300: Error: missing operand
start.S:300: Error: missing operand
start.S:300: Error: bad expression
start.S:300: Error: syntax error; found `l', expected `,'
start.S:300: Error: junk at end of line: `l'
start.S:300: Error: missing operand
start.S:301: Error: junk at end of line, first unrecognized character is `0'
start.S:302: Error: junk at end of line, first unrecognized character is `0'
start.S:303: Error: junk at end of line, first unrecognized character is `0'
start.S:304: Error: junk at end of line, first unrecognized character is `0'
On Mon, Oct 8, 2012 at 12:44 PM, York Sun <yorksun@freescale.com> wrote:
> These assembly macros simplify codes to add and delete temporary TLB entries.
>
> Signed-off-by: York Sun <yorksun@freescale.com>
> ---
> arch/powerpc/cpu/mpc85xx/start.S | 309 ++++++++++++++++----------------------
> 1 file changed, 130 insertions(+), 179 deletions(-)
>
> diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
> index 9e04257..3fe22bf 100644
> --- a/arch/powerpc/cpu/mpc85xx/start.S
> +++ b/arch/powerpc/cpu/mpc85xx/start.S
> @@ -211,6 +211,77 @@ l2_disabled:
> andi. r1,r3,L1CSR0_DCE at l
> beq 2b
>
> + .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch
> + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
> + mtspr MAS0, \scratch
> + lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l
> + mtspr MAS1, \scratch
> + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
> + mtspr MAS2, \scratch
> + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
> + mtspr MAS3, \scratch
> + lis \scratch, \phy_high at h
> + ori \scratch, \scratch, \phy_high at l
> + mtspr MAS7, \scratch
> + isync
> + msync
> + tlbwe
> + isync
> + .endm
> +
> + .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch
> + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
> + mtspr MAS0, \scratch
> + lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l
> + mtspr MAS1, \scratch
> + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
> + mtspr MAS2, \scratch
> + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
> + mtspr MAS3, \scratch
> + lis \scratch, \phy_high at h
> + ori \scratch, \scratch, \phy_high at l
> + mtspr MAS7, \scratch
> + isync
> + msync
> + tlbwe
> + isync
> + .endm
> +
> + .macro delete_tlb1_entry esel scratch
> + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
> + mtspr MAS0, \scratch
> + li \scratch, 0
> + mtspr MAS1, \scratch
> + isync
> + msync
> + tlbwe
> + isync
> + .endm
> +
> + .macro delete_tlb0_entry esel epn wimg scratch
> + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
> + mtspr MAS0, \scratch
> + li \scratch, 0
> + mtspr MAS1, \scratch
> + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
> + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
> + mtspr MAS2, \scratch
> + isync
> + msync
> + tlbwe
> + isync
> + .endm
> +
> #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
> /*
> * TLB entry for debuggging in AS1
> @@ -220,61 +291,35 @@ l2_disabled:
> * in AS1.
> */
>
> - lis r6,FSL_BOOKE_MAS0(1,
> - CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h
> - ori r6,r6,FSL_BOOKE_MAS0(1,
> - CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l
> -
> #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
> /*
> * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
> * bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
> * and this window is outside of 4K boot window.
> */
> - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h
> - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l
> -
> - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
> - (MAS2_I|MAS2_G))@h
> - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
> - (MAS2_I|MAS2_G))@l
> + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB,
> + 0, BOOKE_PAGESZ_4M,
> + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G,
> + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR,
> + 0, r6
>
> - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
> - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
> - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
> #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
> - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h
> - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l
> -
> - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h
> - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l
> -
> - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
> - (MAS3_SX|MAS3_SW|MAS3_SR))@h
> - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
> - (MAS3_SX|MAS3_SW|MAS3_SR))@l
> + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB,
> + 0, BOOKE_PAGESZ_1M,
> + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G,
> + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR,
> + 0, r6
> #else
> /*
> * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
> * because "nexti" will resize TLB to 4K
> */
> - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h
> - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l
> -
> - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h
> - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,
> - (MAS2_I))@l
> - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
> - (MAS3_SX|MAS3_SW|MAS3_SR))@h
> - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
> - (MAS3_SX|MAS3_SW|MAS3_SR))@l
> + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB,
> + 0, BOOKE_PAGESZ_256K,
> + CONFIG_SYS_MONITOR_BASE, MAS2_I,
> + CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR,
> + 0, r6
> #endif
> - mtspr MAS0,r6
> - mtspr MAS1,r7
> - mtspr MAS2,r8
> - mtspr MAS3,r9
> - tlbwe
> - isync
> #endif
>
> /*
> @@ -392,27 +437,11 @@ l2_disabled:
> */
>
> /* create a temp mapping TLB0[0] for LBCR */
> - lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h
> - ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
> -
> - lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
> - ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
> -
> - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
> - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
> -
> - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
> - (MAS3_SX|MAS3_SW|MAS3_SR))@h
> - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
> - (MAS3_SX|MAS3_SW|MAS3_SR))@l
> -
> - mtspr MAS0,r6
> - mtspr MAS1,r7
> - mtspr MAS2,r8
> - mtspr MAS3,r9
> - isync
> - msync
> - tlbwe
> + create_tlb0_entry 0,
> + 0, BOOKE_PAGESZ_4K,
> + CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G,
> + CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR,
> + 0, r6
>
> /* Set LBCR register */
> lis r4,CONFIG_SYS_LBCR_ADDR at h
> @@ -551,49 +580,22 @@ create_ccsr_new_tlb:
> ori r8, r8, CONFIG_SYS_CCSRBAR at l
> lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
> ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
> - lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
> - ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
> - lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
> - ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
> - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
> - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
> - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h
> - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l
> -#ifdef CONFIG_ENABLE_36BIT_PHYS
> - lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH at h
> - ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH at l
> - mtspr MAS7, r7
> -#endif
> - mtspr MAS0, r0
> - mtspr MAS1, r1
> - mtspr MAS2, r2
> - mtspr MAS3, r3
> - isync
> - msync
> - tlbwe
> -
> + create_tlb0_entry 0, \
> + 0, BOOKE_PAGESZ_4K, \
> + CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \
> + CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \
> + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
> /*
> * Create a TLB for the current location of CCSR. Register R9 is reserved
> * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000).
> */
> create_ccsr_old_tlb:
> - lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
> - ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
> - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
> - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
> - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h
> - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l
> -#ifdef CONFIG_ENABLE_36BIT_PHYS
> - li r7, 0 /* The default CCSR address is always a 32-bit number */
> - mtspr MAS7, r7
> -#endif
> - mtspr MAS0, r0
> - /* MAS1 is the same as above */
> - mtspr MAS2, r2
> - mtspr MAS3, r3
> - isync
> - msync
> - tlbwe
> + create_tlb0_entry 1, \
> + 0, BOOKE_PAGESZ_4K, \
> + CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \
> + CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \
> + 0, r3 /* The default CCSR address is always a 32-bit number */
> +
>
> /*
> * We have a TLB for what we think is the current (old) CCSR. Let's
> @@ -743,27 +745,9 @@ write_new_ccsrbar:
>
> /* Delete the temporary TLBs */
> delete_temp_tlbs:
> - lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
> - ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
> - li r1, 0
> - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
> - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
> - mtspr MAS0, r0
> - mtspr MAS1, r1
> - mtspr MAS2, r2
> - isync
> - msync
> - tlbwe
> + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3
> + delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3
>
> - lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
> - ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
> - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
> - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
> - mtspr MAS0, r0
> - mtspr MAS2, r2
> - isync
> - msync
> - tlbwe
> #endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
>
> #ifdef CONFIG_SYS_FSL_ERRATUM_A004510
> @@ -1019,83 +1003,50 @@ create_init_ram_area:
>
> #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
> /* create a temp mapping in AS=1 to the 4M boot window */
> - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
> - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
> -
> - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
> - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
> + create_tlb1_entry 15, \
> + 1, BOOKE_PAGESZ_4M, \
> + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
> + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
> + 0, r6
>
> - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
> - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
> - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
> #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
> /* create a temp mapping in AS = 1 for Flash mapping
> * created by PBL for ISBC code
> */
> - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
> - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
> -
> - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
> - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
> -
> - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
> - (MAS3_SX|MAS3_SW|MAS3_SR))@h
> - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
> - (MAS3_SX|MAS3_SW|MAS3_SR))@l
> + create_tlb1_entry 15, \
> + 1, BOOKE_PAGESZ_1M, \
> + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
> + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
> + 0, r6
> #else
> /*
> * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main
> * image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage.
> */
> - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
> - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
> -
> - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
> - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
> -
> - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
> - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
> + create_tlb1_entry 15, \
> + 1, BOOKE_PAGESZ_1M, \
> + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
> + CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
> + 0, r6
> #endif
>
> - mtspr MAS0,r6
> - mtspr MAS1,r7
> - mtspr MAS2,r8
> - mtspr MAS3,r9
> - isync
> - msync
> - tlbwe
> -
> /* create a temp mapping in AS=1 to the stack */
> - lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
> - ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
> -
> - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
> - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
> -
> - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
> - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
> -
> #if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \
> defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH)
> - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
> - (MAS3_SX|MAS3_SW|MAS3_SR))@h
> - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
> - (MAS3_SX|MAS3_SW|MAS3_SR))@l
> - li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH
> - mtspr MAS7,r10
> + create_tlb1_entry 14, \
> + 1, BOOKE_PAGESZ_16K, \
> + CONFIG_SYS_INIT_RAM_ADDR, 0, \
> + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \
> + CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6
> +
> #else
> - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
> - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
> + create_tlb1_entry 14, \
> + 1, BOOKE_PAGESZ_16K, \
> + CONFIG_SYS_INIT_RAM_ADDR, 0, \
> + CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \
> + 0, r6
> #endif
>
> - mtspr MAS0,r6
> - mtspr MAS1,r7
> - mtspr MAS2,r8
> - mtspr MAS3,r9
> - isync
> - msync
> - tlbwe
> -
> lis r6,MSR_IS|MSR_DS|MSR_DE at h
> ori r6,r6,MSR_IS|MSR_DS|MSR_DE at l
> lis r7,switch_as at h
> --
> 1.7.9.5
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
^ permalink raw reply [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 04/28] powerpc/mpc85xx: Introduce new macros to add and delete TLB entries
2012-10-22 9:14 ` Andy Fleming
@ 2012-10-22 16:16 ` York Sun
0 siblings, 0 replies; 31+ messages in thread
From: York Sun @ 2012-10-22 16:16 UTC (permalink / raw)
To: u-boot
On 10/22/2012 02:14 AM, Andy Fleming wrote:
> This is causing a bunch of non QorIQ boards to stop building. Please
> investigate:
>
> $ ./MAKEALL MPC8548CDS
> Configuring for MPC8548CDS board...
> start.S:300: Error: missing operand
> start.S:300: Error: missing operand
> start.S:300: Error: missing operand
> start.S:300: Error: missing operand
> start.S:300: Error: missing operand
> start.S:300: Error: bad expression
> start.S:300: Error: bad expression
Thanks for catching it. I thought I run MAKEALL for mpc85xx. I may have
missed this one after a rebase. Sending a patch to fix soon.
York
^ permalink raw reply [flat|nested] 31+ messages in thread
* [U-Boot] [PATCH 27/28] powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1
2012-10-08 17:44 ` [U-Boot] [PATCH 27/28] powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1 York Sun
@ 2012-10-24 1:40 ` Scott Wood
0 siblings, 0 replies; 31+ messages in thread
From: Scott Wood @ 2012-10-24 1:40 UTC (permalink / raw)
To: u-boot
On 10/08/2012 12:44:30 PM, York Sun wrote:
> Move spin table to cached memory to comply with ePAPR v1.1.
> Load R3 with 64-bit value if CONFIG_SYS_PPC64 is defined.
>
> 'M' bit is set for DDR TLB to maintain cache coherence.
>
> See details in doc/README.mpc85xx-spin-table.
>
> Signed-off-by: York Sun <yorksun@freescale.com>
> ---
> README | 6 +
> arch/powerpc/cpu/mpc85xx/fdt.c | 13 ++-
> arch/powerpc/cpu/mpc85xx/mp.c | 61 +++++-----
> arch/powerpc/cpu/mpc85xx/mp.h | 5 +-
> arch/powerpc/cpu/mpc85xx/release.S | 179
> +++++++++++++++++------------
> arch/powerpc/cpu/mpc85xx/tlb.c | 2 +-
> arch/powerpc/include/asm/config_mpc85xx.h | 3 +
> doc/README.mpc85xx-spin-table | 26 +++++
> 8 files changed, 183 insertions(+), 112 deletions(-)
> create mode 100644 doc/README.mpc85xx-spin-table
As we discussed internally, this patch needs to be RFC until changes go
into Linux to be compatible with a cacheable spin table.
-Scott
^ permalink raw reply [flat|nested] 31+ messages in thread
end of thread, other threads:[~2012-10-24 1:40 UTC | newest]
Thread overview: 31+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-08 17:44 [U-Boot] [PATCH 01/28] driver/pci: Fix compiling error York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 02/28] powerpc/DPAA: " York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 03/28] powerpc/85xx: Add determining and report IFC frequency York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 04/28] powerpc/mpc85xx: Introduce new macros to add and delete TLB entries York Sun
2012-10-22 9:14 ` Andy Fleming
2012-10-22 16:16 ` York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 05/28] powerpc/mpc85xx: Enable L2 at the beginning of U-boot for E6500 York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 06/28] powerpc/mpc85xx: change RCW MEM_PLL_PLAT for Chassis generation 2 York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 07/28] powerpc/mpc85xx: check number of cores York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 08/28] powerpc/mpc85xx: Fix core cluster PLL calculation for Chassis generation 2 York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 09/28] powerpc/mpc85xx: expand SERDES reference clock select bit York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 10/28] powerpc/e6500: Move QCSP registers for QMan v3 York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 11/28] powerpc/mpc85xx: Add RCW bits and registers for SerDes for corenet2 York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 12/28] powerpc/corenet2: Add " York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 13/28] powerpc/corenet2: fix mismatch DDR sync bit from RCW York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 14/28] board/freescale/common: VSC3316/VSC3308 initialization code York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 15/28] powerpc/mpc85xx: Add T4 device definitions York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 16/28] powerpc/mpc85xx: Add T4240 SoC York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 17/28] powerpc/mpc85xx: Add B4860 and variant SoCs York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 18/28] fm/mEMAC: add mEMAC frame work York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 19/28] powerpc/mpc8xxx: Update DDR registers York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 20/28] powerpc/mpc8xxx: Fix DDR driver handling quad-rank DIMMs and address calculation York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 21/28] powerpc/mpc8xxx: Fix DDR initialization waiting for D_INIT York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 22/28] powerpc/mpc85xx: software workaround for DDR erratum A-004468 York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 23/28] powerpc/mpc85xx: Add workaround for DDR erratum A004934 York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 24/28] powerpc/mpc8xxx: Add auto select bank interleaving mode York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 25/28] powerpc/mpc8xxx: Fix DDR SPD failed message York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 26/28] powerpc/mpc85xx: Remove R6 from spin table York Sun
2012-10-08 17:44 ` [U-Boot] [PATCH 27/28] powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1 York Sun
2012-10-24 1:40 ` Scott Wood
2012-10-08 17:44 ` [U-Boot] [PATCH 28/28] powerpc/mpc85xx: Add CONFIG_DDR_CLK_FREQ for corenet platform York Sun
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.