From: Francesco Lavra <francescolavra.fl@gmail.com> To: "Rajanikanth H.V" <rajanikanth.hv@linaro.org> Cc: rob.herring@calxeda.com, lee.jones@linaro.org, arnd@arndb.de, anton.vorontsov@linaro.org, linus.walleij@stericsson.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linaro-dev@lists.linaro.org, patches@linaro.org, STEricsson_nomadik_linux@list.st.com, rajanikanth.hv@stericsson.com Subject: Re: [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Date: Thu, 01 Nov 2012 16:15:11 +0100 [thread overview] Message-ID: <509291FF.6090500@gmail.com> (raw) In-Reply-To: <1351698033-8980-2-git-send-email-rajanikanth.hv@linaro.org> On 10/31/2012 04:40 PM, Rajanikanth H.V wrote: > From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com> > > - This patch adds device tree support for fuelgauge driver > - optimize bm devices platform_data usage and of_probe(...) > Note: of_probe() routine for battery managed devices is made > common across all bm drivers. > - test status: > - interrupt numbers assigned differs between legacy and FDT mode. > > Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> [...] > +int __devinit > +bmdevs_of_probe(struct device *dev, > + struct device_node *np, > + struct abx500_bm_data **battery) > +{ > + struct abx500_battery_type *btype; > + struct device_node *np_bat_supply; > + struct abx500_bm_data *bat; > + const char *btech; > + char bat_tech[8]; > + int i, thermistor; > + > + *battery = &ab8500_bm_data; > + > + /* get phandle to 'battery-info' node */ > + np_bat_supply = of_parse_phandle(np, "battery", 0); > + if (!np_bat_supply) { > + dev_err(dev, "missing property battery\n"); > + return -EINVAL; > + } > + if (of_property_read_bool(np_bat_supply, > + "thermistor-on-batctrl")) > + thermistor = NTC_INTERNAL; > + else > + thermistor = NTC_EXTERNAL; > + > + bat = *battery; > + if (thermistor == NTC_EXTERNAL) { > + bat->n_btypes = 4; > + bat->bat_type = bat_type_ext_thermistor; > + bat->adc_therm = ABx500_ADC_THERM_BATTEMP; > + } > + btech = of_get_property(np_bat_supply, > + "stericsson,battery-type", NULL); > + if (!btech) { > + dev_warn(dev, "missing property battery-name/type\n"); > + strcpy(bat_tech, "UNKNOWN"); > + } else { > + strcpy(bat_tech, btech); > + } I don't get the point of declaring the char array and copying the string in it, when you could simply use just the pointer returned by of_get_property(). Anyway, if the string property is longer than 8 characters, you are writing past the size of the destination array.
WARNING: multiple messages have this Message-ID (diff)
From: francescolavra.fl@gmail.com (Francesco Lavra) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Date: Thu, 01 Nov 2012 16:15:11 +0100 [thread overview] Message-ID: <509291FF.6090500@gmail.com> (raw) In-Reply-To: <1351698033-8980-2-git-send-email-rajanikanth.hv@linaro.org> On 10/31/2012 04:40 PM, Rajanikanth H.V wrote: > From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com> > > - This patch adds device tree support for fuelgauge driver > - optimize bm devices platform_data usage and of_probe(...) > Note: of_probe() routine for battery managed devices is made > common across all bm drivers. > - test status: > - interrupt numbers assigned differs between legacy and FDT mode. > > Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> [...] > +int __devinit > +bmdevs_of_probe(struct device *dev, > + struct device_node *np, > + struct abx500_bm_data **battery) > +{ > + struct abx500_battery_type *btype; > + struct device_node *np_bat_supply; > + struct abx500_bm_data *bat; > + const char *btech; > + char bat_tech[8]; > + int i, thermistor; > + > + *battery = &ab8500_bm_data; > + > + /* get phandle to 'battery-info' node */ > + np_bat_supply = of_parse_phandle(np, "battery", 0); > + if (!np_bat_supply) { > + dev_err(dev, "missing property battery\n"); > + return -EINVAL; > + } > + if (of_property_read_bool(np_bat_supply, > + "thermistor-on-batctrl")) > + thermistor = NTC_INTERNAL; > + else > + thermistor = NTC_EXTERNAL; > + > + bat = *battery; > + if (thermistor == NTC_EXTERNAL) { > + bat->n_btypes = 4; > + bat->bat_type = bat_type_ext_thermistor; > + bat->adc_therm = ABx500_ADC_THERM_BATTEMP; > + } > + btech = of_get_property(np_bat_supply, > + "stericsson,battery-type", NULL); > + if (!btech) { > + dev_warn(dev, "missing property battery-name/type\n"); > + strcpy(bat_tech, "UNKNOWN"); > + } else { > + strcpy(bat_tech, btech); > + } I don't get the point of declaring the char array and copying the string in it, when you could simply use just the pointer returned by of_get_property(). Anyway, if the string property is longer than 8 characters, you are writing past the size of the destination array.
next prev parent reply other threads:[~2012-11-01 15:13 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-10-31 15:40 [PATCH 0/4] Implement device tree support for ab8500 BM Devices Rajanikanth H.V 2012-10-31 15:40 ` Rajanikanth H.V 2012-10-31 15:40 ` [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Rajanikanth H.V 2012-10-31 15:40 ` Rajanikanth H.V 2012-11-01 15:15 ` Francesco Lavra [this message] 2012-11-01 15:15 ` Francesco Lavra 2012-11-07 18:45 ` Rajanikanth H V 2012-11-07 18:45 ` Rajanikanth H V 2012-11-10 16:53 ` Francesco Lavra 2012-11-10 16:53 ` Francesco Lavra 2012-11-15 11:34 ` Rajanikanth HV 2012-11-15 11:34 ` Rajanikanth HV 2012-10-31 15:40 ` [PATCH 2/4] mfd: ab8500: add devicetree support for btemp Rajanikanth H.V 2012-10-31 15:40 ` Rajanikanth H.V 2012-10-31 15:40 ` [PATCH 3/4] mfd: ab8500: add devicetree support for charger Rajanikanth H.V 2012-10-31 15:40 ` Rajanikanth H.V 2012-10-31 15:40 ` [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg Rajanikanth H.V 2012-10-31 15:40 ` Rajanikanth H.V 2012-11-19 3:46 ` [PATCH 0/4] Implement device tree support for ab8500 BM Devices Anton Vorontsov 2012-11-19 3:46 ` Anton Vorontsov 2012-11-19 3:58 ` Rajanikanth HV 2012-11-19 3:58 ` Rajanikanth HV 2012-11-19 4:57 ` Anton Vorontsov 2012-11-19 4:57 ` Anton Vorontsov -- strict thread matches above, loose matches on Subject: below -- 2012-11-22 18:43 Rajanikanth H.V 2012-11-22 18:43 ` [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Rajanikanth H.V 2012-11-22 18:43 ` Rajanikanth H.V 2012-11-22 20:08 ` Anton Vorontsov 2012-11-22 20:08 ` Anton Vorontsov 2012-11-23 9:50 ` Lee Jones 2012-11-23 9:50 ` Lee Jones 2012-10-25 6:30 [PATCH 0/4] Implement device tree support for ab8500 BM Devices Rajanikanth H.V 2012-10-25 6:30 ` [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Rajanikanth H.V 2012-10-27 15:07 ` Francesco Lavra 2012-10-27 15:07 ` Francesco Lavra 2012-10-27 16:00 ` Rajanikanth HV 2012-10-27 16:00 ` Rajanikanth HV 2012-10-27 16:18 ` Francesco Lavra 2012-10-27 16:18 ` Francesco Lavra 2012-10-01 4:08 [PATCH 0/4] Implement device tree support for ab8500 BM Devices Rajanikanth H.V 2012-10-01 4:08 ` [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Rajanikanth H.V 2012-10-01 9:49 ` Lee Jones 2012-10-01 9:49 ` Lee Jones 2012-10-01 9:59 ` Rajanikanth HV 2012-10-01 9:59 ` Rajanikanth HV 2012-10-01 10:36 ` Lee Jones 2012-10-01 10:36 ` Lee Jones 2012-10-01 10:22 ` Lee Jones 2012-10-01 10:22 ` Lee Jones 2012-10-06 14:01 ` Francesco Lavra 2012-10-06 14:01 ` Francesco Lavra
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=509291FF.6090500@gmail.com \ --to=francescolavra.fl@gmail.com \ --cc=STEricsson_nomadik_linux@list.st.com \ --cc=anton.vorontsov@linaro.org \ --cc=arnd@arndb.de \ --cc=lee.jones@linaro.org \ --cc=linaro-dev@lists.linaro.org \ --cc=linus.walleij@stericsson.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=patches@linaro.org \ --cc=rajanikanth.hv@linaro.org \ --cc=rajanikanth.hv@stericsson.com \ --cc=rob.herring@calxeda.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.