* Edimax EW-7612Aun does not work.
[not found] <767233844.63481367.1353282635209.JavaMail.root@zimbra4-e1.priv.proxad.net>
@ 2012-11-18 23:54 ` sebastien.major
2012-11-19 0:12 ` Larry Finger
0 siblings, 1 reply; 4+ messages in thread
From: sebastien.major @ 2012-11-18 23:54 UTC (permalink / raw)
To: linux-wireless
Hello,
All is said in title : my edimax refuse to start correctly.
kernel choose to load rtl8192cu and appropriate firmware but nothing : I see a reply in dmesg which says "wlan10 : link not ready".
tested on Acer laptop Core 2 duo with linux 3.6.7 freshly compiled by kpkg-buildpackage (Debian unstable).
Edimax driver are old and for i386 (32 bits).
Any doc is welcome : thanks by advance.
Best regards.
S. Major
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Edimax EW-7612Aun does not work.
2012-11-18 23:54 ` Edimax EW-7612Aun does not work sebastien.major
@ 2012-11-19 0:12 ` Larry Finger
2012-11-19 0:43 ` sebastien.major
0 siblings, 1 reply; 4+ messages in thread
From: Larry Finger @ 2012-11-19 0:12 UTC (permalink / raw)
To: sebastien.major; +Cc: linux-wireless
On 11/18/2012 05:54 PM, sebastien.major@free.fr wrote:
>
> Hello,
>
> All is said in title : my edimax refuse to start correctly.
>
> kernel choose to load rtl8192cu and appropriate firmware but nothing : I see a reply in dmesg which says "wlan10 : link not ready".
>
> tested on Acer laptop Core 2 duo with linux 3.6.7 freshly compiled by kpkg-buildpackage (Debian unstable).
>
> Edimax driver are old and for i386 (32 bits).
>
>
> Any doc is welcome : thanks by advance.
That problem is not likely due to rtl8192cu, but is related to some other issue.
What does 'rfkill list' show?
What distro do you use?
Larry
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Edimax EW-7612Aun does not work.
2012-11-19 0:12 ` Larry Finger
@ 2012-11-19 0:43 ` sebastien.major
2012-11-20 2:05 ` Apologies ... " sebastien.major
0 siblings, 1 reply; 4+ messages in thread
From: sebastien.major @ 2012-11-19 0:43 UTC (permalink / raw)
To: Larry Finger; +Cc: linux-wireless
Hello,
First of all : many thanks for you done with Linux !!!
Ok.
I traced rfkill, iwconfig wlan0, uname -a, dmesg, lsusb and lsusb -v.
Best regards.
S. Major
Here it is :
===> # rfkill
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
I use debian unstable (updated last thursday).
Here some other traces :
===> # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=766415f7-3cd0-4074-8c20-69a0c3d5f111 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f4fd000 (usable)
[ 0.000000] BIOS-e820: 000000003f4fd000 - 000000003f508000 (reserved)
[ 0.000000] BIOS-e820: 000000003f508000 - 000000003f552000 (usable)
[ 0.000000] BIOS-e820: 000000003f552000 - 000000003f555000 (reserved)
[ 0.000000] BIOS-e820: 000000003f555000 - 000000003f5bb000 (usable)
[ 0.000000] BIOS-e820: 000000003f5bb000 - 000000003f5bf000 (reserved)
[ 0.000000] BIOS-e820: 000000003f5bf000 - 000000003f670000 (usable)
[ 0.000000] BIOS-e820: 000000003f670000 - 000000003f6bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6bf000 - 000000003f700000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Acer Aspire 7720 /Poyang , BIOS V1.45 11/10/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3f670 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 1 base 000000000 mask FE0000000 write-back
[ 0.000000] 2 base 020000000 mask FE0000000 write-back
[ 0.000000] 3 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 4 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f670000
[ 0.000000] 0000000000 - 003f600000 page 2M
[ 0.000000] 003f600000 - 003f670000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f670000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 3674c000 - 3739e000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 000000003f6fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 000000003f6fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000003f6f4000 08968 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000003f675000 00040
[ 0.000000] ACPI: APIC 000000003f6f3000 00068 (v02 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000003f6f2000 0003C (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000003f6f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000003f6f0000 00038 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000003f6ef000 004C4 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000003f6ee000 00232 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000003f6ed000 000A0 (v01 PmRef Cpu1Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f670000
[ 0.000000] Initmem setup node 0 0000000000000000-000000003f670000
[ 0.000000] NODE_DATA [000000003f66b000 - 000000003f66ffff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003dc00000-ffff88003e9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f4fd
[ 0.000000] 0: 0x0003f508 -> 0x0003f552
[ 0.000000] 0: 0x0003f555 -> 0x0003f5bb
[ 0.000000] 0: 0x0003f5bf -> 0x0003f670
[ 0.000000] On node 0 totalpages: 259565
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3495 pages used for memmap
[ 0.000000] DMA32 zone: 252087 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000003f4fd000 - 000000003f508000
[ 0.000000] PM: Registered nosave memory: 000000003f552000 - 000000003f555000
[ 0.000000] PM: Registered nosave memory: 000000003f5bb000 - 000000003f5bf000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f200000 s82880 r8192 d23616 u1048576
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 256009
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=766415f7-3cd0-4074-8c20-69a0c3d5f111 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1002564k/1038784k available (3416k kernel code, 524k absent, 35696k reserved, 3319k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.429 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.85 BogoMIPS (lpj=7981716)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004063] Security Framework initialized
[ 0.004071] AppArmor: AppArmor disabled by boot time parameter
[ 0.004183] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008452] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.008791] Mount-cache hash table entries: 256
[ 0.008943] Initializing cgroup subsys cpuacct
[ 0.008949] Initializing cgroup subsys memory
[ 0.008963] Initializing cgroup subsys devices
[ 0.008965] Initializing cgroup subsys freezer
[ 0.008967] Initializing cgroup subsys net_cls
[ 0.008971] Initializing cgroup subsys blkio
[ 0.008982] Initializing cgroup subsys perf_event
[ 0.009021] CPU: Physical Processor ID: 0
[ 0.009022] CPU: Processor Core ID: 0
[ 0.009026] mce: CPU supports 6 MCE banks
[ 0.009035] CPU0: Thermal monitoring enabled (TM1)
[ 0.009040] using mwait in idle threads.
[ 0.009536] ACPI: Core revision 20110623
[ 0.016532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056300] CPU0: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz stepping 0d
[ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.060003] PEBS disabled due to CPU errata.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148046] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148095] Brought up 2 CPUs
[ 0.148098] Total of 2 processors activated (7980.77 BogoMIPS).
[ 0.149421] devtmpfs: initialized
[ 0.152723] PM: Registering ACPI NVS region at 3f670000 (323584 bytes)
[ 0.152723] print_constraints: dummy:
[ 0.152723] NET: Registered protocol family 16
[ 0.152723] ACPI: bus type pci registered
[ 0.152723] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.152723] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.187727] PCI: Using configuration type 1 for base access
[ 0.188429] bio: create slab <bio-0> at 0
[ 0.188429] ACPI: Added _OSI(Module Device)
[ 0.188429] ACPI: Added _OSI(Processor Device)
[ 0.188429] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.188429] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.189764] ACPI: EC: Look up EC in DSDT
[ 0.194160] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.196395] ACPI: SSDT 000000003f674c90 0022C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.196811] ACPI: Dynamic OEM Table Load:
[ 0.196815] ACPI: SSDT (null) 0022C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.196977] ACPI: SSDT 000000003f673610 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.197368] ACPI: Dynamic OEM Table Load:
[ 0.197371] ACPI: SSDT (null) 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.220302] ACPI: SSDT 000000003f674f10 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.220706] ACPI: Dynamic OEM Table Load:
[ 0.220710] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.220835] ACPI: SSDT 000000003f676d10 00083 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.221227] ACPI: Dynamic OEM Table Load:
[ 0.221230] ACPI: SSDT (null) 00083 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.244359] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.260091] ACPI: Interpreter enabled
[ 0.260096] ACPI: (supports S0 S3 S4 S5)
[ 0.260123] ACPI: Using IOAPIC for interrupt routing
[ 0.496753] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.496987] ACPI: No dock devices found.
[ 0.496989] HEST: Table not found.
[ 0.496994] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.497437] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[ 0.497445] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.497447] _OSC request data:1 8 1f
[ 0.497453] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.498204] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.498207] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.498211] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.498215] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[ 0.498231] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.498287] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
[ 0.498302] pci 0000:00:02.0: reg 10: [mem 0x53000000-0x530fffff 64bit]
[ 0.498313] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff 64bit pref]
[ 0.498320] pci 0000:00:02.0: reg 20: [io 0x4110-0x4117]
[ 0.498365] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
[ 0.498378] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x000fffff 64bit]
[ 0.498477] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.498538] pci 0000:00:1a.0: reg 20: [io 0x40c0-0x40df]
[ 0.498591] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.498652] pci 0000:00:1a.1: reg 20: [io 0x40a0-0x40bf]
[ 0.498717] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.498744] pci 0000:00:1a.7: reg 10: [mem 0x56304c00-0x56304fff]
[ 0.498858] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.498896] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.498921] pci 0000:00:1b.0: reg 10: [mem 0x56300000-0x56303fff 64bit]
[ 0.499033] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.499070] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.499189] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.499229] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.499347] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.499388] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[ 0.499506] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.499548] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.499609] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
[ 0.499657] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.499718] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
[ 0.499767] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.499827] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
[ 0.499889] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.499916] pci 0000:00:1d.7: reg 10: [mem 0x56304800-0x56304bff]
[ 0.500037] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.500069] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.500175] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.500302] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[ 0.500307] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.500371] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.500389] pci 0000:00:1f.1: reg 10: [io 0x4108-0x410f]
[ 0.500402] pci 0000:00:1f.1: reg 14: [io 0x4124-0x4127]
[ 0.500416] pci 0000:00:1f.1: reg 18: [io 0x4100-0x4107]
[ 0.500429] pci 0000:00:1f.1: reg 1c: [io 0x4120-0x4123]
[ 0.500442] pci 0000:00:1f.1: reg 20: [io 0x40e0-0x40ef]
[ 0.500502] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.500532] pci 0000:00:1f.2: reg 10: [io 0x40f8-0x40ff]
[ 0.500545] pci 0000:00:1f.2: reg 14: [io 0x411c-0x411f]
[ 0.500559] pci 0000:00:1f.2: reg 18: [io 0x40f0-0x40f7]
[ 0.500572] pci 0000:00:1f.2: reg 1c: [io 0x4118-0x411b]
[ 0.500585] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
[ 0.500598] pci 0000:00:1f.2: reg 24: [mem 0x56304000-0x563047ff]
[ 0.500669] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.500697] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.500716] pci 0000:00:1f.3: reg 10: [mem 0x56305000-0x563050ff]
[ 0.500761] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
[ 0.500869] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.500874] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.500880] pci 0000:00:1c.0: bridge window [mem 0x55300000-0x562fffff]
[ 0.500889] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.500956] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.500962] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.500968] pci 0000:00:1c.1: bridge window [mem 0x54300000-0x552fffff]
[ 0.500977] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[ 0.501080] pci 0000:05:00.0: [14e4:1693] type 0 class 0x000200
[ 0.501114] pci 0000:05:00.0: reg 10: [mem 0x53200000-0x5320ffff 64bit]
[ 0.501309] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.508052] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.508058] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.508064] pci 0000:00:1c.2: bridge window [mem 0x53200000-0x542fffff]
[ 0.508073] pci 0000:00:1c.2: bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[ 0.508125] pci 0000:07:00.0: [1180:0832] type 0 class 0x000c00
[ 0.508143] pci 0000:07:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.508146] pci 0000:07:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.508164] pci 0000:07:00.0: reg 10: [mem 0x53100000-0x531007ff]
[ 0.508271] pci 0000:07:00.0: supports D1 D2
[ 0.508273] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.508303] pci 0000:07:00.1: [1180:0822] type 0 class 0x000805
[ 0.508328] pci 0000:07:00.1: reg 10: [mem 0x53100b00-0x53100bff]
[ 0.508433] pci 0000:07:00.1: supports D1 D2
[ 0.508436] pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.508464] pci 0000:07:00.2: [1180:0592] type 0 class 0x000880
[ 0.508487] pci 0000:07:00.2: reg 10: [mem 0x53100900-0x531009ff]
[ 0.508595] pci 0000:07:00.2: supports D1 D2
[ 0.508597] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.508627] pci 0000:07:00.3: [1180:0852] type 0 class 0x000880
[ 0.508651] pci 0000:07:00.3: reg 10: [mem 0x53100800-0x531008ff]
[ 0.508760] pci 0000:07:00.3: supports D1 D2
[ 0.508762] pci 0000:07:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.508843] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.508852] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
[ 0.508862] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.508865] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.508868] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.508872] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.508903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.509102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.509194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.509263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.509433] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[ 0.509441] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.509443] _OSC request data:1 1f 1f
[ 0.509448] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.509518] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
[ 0.509526] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.509528] _OSC request data:1 0 1d
[ 0.509533] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d
[ 0.509536] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.517647] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.517723] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.517797] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.517870] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.517944] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.518020] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.518093] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.518166] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.518298] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.518298] vgaarb: loaded
[ 0.518298] vgaarb: bridge control possible 0000:00:02.0
[ 0.518298] PCI: Using ACPI for IRQ routing
[ 0.530175] PCI: pci_cache_line_size set to 64 bytes
[ 0.530296] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.530299] reserve RAM buffer: 000000003f4fd000 - 000000003fffffff
[ 0.530304] reserve RAM buffer: 000000003f552000 - 000000003fffffff
[ 0.530308] reserve RAM buffer: 000000003f5bb000 - 000000003fffffff
[ 0.530312] reserve RAM buffer: 000000003f670000 - 000000003fffffff
[ 0.530455] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.530463] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.530468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.536170] Switching to clocksource hpet
[ 0.538426] pnp: PnP ACPI init
[ 0.538446] ACPI: bus type pnp registered
[ 0.538847] pnp 00:00: [bus 00-ff]
[ 0.538850] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.538853] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.538856] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.538858] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.538861] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.538864] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.538867] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.538869] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.538872] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.538876] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.538879] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.538882] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.538884] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.538887] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.538890] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.538893] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.538895] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.538898] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.538992] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.539191] pnp 00:01: [io 0x002e-0x002f]
[ 0.539193] pnp 00:01: [io 0x004e-0x004f]
[ 0.539196] pnp 00:01: [io 0x0068]
[ 0.539198] pnp 00:01: [io 0x006c]
[ 0.539200] pnp 00:01: [io 0x164e-0x164f]
[ 0.539203] pnp 00:01: [io 0x0061]
[ 0.539205] pnp 00:01: [io 0x0070]
[ 0.539207] pnp 00:01: [io 0x0080]
[ 0.539209] pnp 00:01: [io 0x0092]
[ 0.539211] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.539214] pnp 00:01: [io 0x0063]
[ 0.539216] pnp 00:01: [io 0x0065]
[ 0.539218] pnp 00:01: [io 0x0067]
[ 0.539220] pnp 00:01: [io 0x0600-0x060f]
[ 0.539223] pnp 00:01: [io 0x0610]
[ 0.539225] pnp 00:01: [io 0x0800-0x080f]
[ 0.539227] pnp 00:01: [io 0x0810-0x0817]
[ 0.539229] pnp 00:01: [io 0x0400-0x047f]
[ 0.539232] pnp 00:01: [io 0x0500-0x053f]
[ 0.539234] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.539237] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.539241] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.539243] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.539246] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.539248] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.539251] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.539253] pnp 00:01: [mem 0x32000000-0x320000ff]
[ 0.539284] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x1fff]
[ 0.539363] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.539367] system 00:01: [io 0x0610] has been reserved
[ 0.539370] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.539374] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.539377] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.539380] system 00:01: [io 0x0500-0x053f] has been reserved
[ 0.539385] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.539388] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.539392] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.539396] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.539401] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.539405] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.539408] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.539412] system 00:01: [mem 0x32000000-0x320000ff] could not be reserved
[ 0.539416] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.539468] pnp 00:02: [io 0x0000-0x001f]
[ 0.539471] pnp 00:02: [io 0x0081-0x0091]
[ 0.539473] pnp 00:02: [io 0x0093-0x009f]
[ 0.539475] pnp 00:02: [io 0x00c0-0x00df]
[ 0.539478] pnp 00:02: [dma 4]
[ 0.539513] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.539542] pnp 00:03: [io 0x0070-0x0077]
[ 0.539577] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.539662] pnp 00:04: [irq 0 disabled]
[ 0.539676] pnp 00:04: [irq 8]
[ 0.539679] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.539713] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.539728] pnp 00:05: [io 0x00f0]
[ 0.539734] pnp 00:05: [irq 13]
[ 0.539770] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.539784] pnp 00:06: [mem 0xfff00000-0xffffffff]
[ 0.539821] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.539852] pnp 00:07: [io 0x0060]
[ 0.539858] pnp 00:07: [io 0x0064]
[ 0.539864] pnp 00:07: [irq 1]
[ 0.539900] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.539955] pnp 00:08: [irq 12]
[ 0.539993] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.664113] pnp 00:09: [io 0xff2c-0xff2f]
[ 0.664122] pnp 00:09: [irq 4]
[ 0.664191] pnp 00:09: Plug and Play ACPI device, IDs ENE0100 (active)
[ 0.664207] pnp: PnP ACPI: found 10 devices
[ 0.664209] ACPI: ACPI bus type pnp unregistered
[ 0.671909] PCI: max bus depth: 1 pci_try_num: 2
[ 0.671963] pci 0000:00:02.1: BAR 0: assigned [mem 0x56400000-0x564fffff 64bit]
[ 0.671970] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.671975] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.671982] pci 0000:00:1c.0: bridge window [mem 0x55300000-0x562fffff]
[ 0.671988] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.671997] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.672013] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.672020] pci 0000:00:1c.1: bridge window [mem 0x54300000-0x552fffff]
[ 0.672026] pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[ 0.672035] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.672039] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.672046] pci 0000:00:1c.2: bridge window [mem 0x53200000-0x542fffff]
[ 0.672052] pci 0000:00:1c.2: bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[ 0.672062] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 0.672069] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
[ 0.672100] pci 0000:00:1c.0: setting latency timer to 64
[ 0.672115] pci 0000:00:1c.1: setting latency timer to 64
[ 0.672129] pci 0000:00:1c.2: setting latency timer to 64
[ 0.672138] pci 0000:00:1e.0: setting latency timer to 64
[ 0.672143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.672146] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.672149] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.672151] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[ 0.672155] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.672157] pci_bus 0000:02: resource 1 [mem 0x55300000-0x562fffff]
[ 0.672160] pci_bus 0000:02: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[ 0.672163] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.672166] pci_bus 0000:04: resource 1 [mem 0x54300000-0x552fffff]
[ 0.672169] pci_bus 0000:04: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[ 0.672172] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
[ 0.672175] pci_bus 0000:05: resource 1 [mem 0x53200000-0x542fffff]
[ 0.672178] pci_bus 0000:05: resource 2 [mem 0x52000000-0x52ffffff 64bit pref]
[ 0.672181] pci_bus 0000:07: resource 1 [mem 0x53100000-0x531fffff]
[ 0.672184] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.672186] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.672189] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.672192] pci_bus 0000:07: resource 7 [mem 0x40000000-0xfebfffff]
[ 0.672265] NET: Registered protocol family 2
[ 0.672374] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.672949] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.674067] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.674868] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.674871] TCP reno registered
[ 0.674882] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.674901] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.675090] NET: Registered protocol family 1
[ 0.675118] pci 0000:00:02.0: Boot video device
[ 0.675598] PCI: CLS 0 bytes, default 64
[ 0.675671] Unpacking initramfs...
[ 0.995502] Freeing initrd memory: 12616k freed
[ 1.005593] audit: initializing netlink socket (disabled)
[ 1.005612] type=2000 audit(1353284629.000:1): initialized
[ 1.020274] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.020731] VFS: Disk quotas dquot_6.5.2
[ 1.020768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.020854] msgmni has been set to 1982
[ 1.021054] alg: No test for stdrng (krng)
[ 1.021093] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.021097] io scheduler noop registered
[ 1.021099] io scheduler deadline registered
[ 1.021117] io scheduler cfq registered (default)
[ 1.021229] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.021298] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.021391] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.021451] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 1.021539] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.021597] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 1.021720] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.021751] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.021753] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.022034] acpiphp: Slot [1] registered
[ 1.022195] intel_idle: does not run on family 6 model 15
[ 1.022233] ERST: Table is not found!
[ 1.022235] GHES: HEST is not enabled!
[ 1.022311] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.072378] Linux agpgart interface v0.103
[ 1.072476] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 1.072577] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.073155] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.073312] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[ 1.073467] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.110749] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.110758] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.110925] mousedev: PS/2 mouse device common for all mice
[ 1.113964] rtc_cmos 00:03: RTC can wake from S4
[ 1.114118] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.114155] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.114167] cpuidle: using governor ladder
[ 1.114169] cpuidle: using governor menu
[ 1.114415] TCP cubic registered
[ 1.114468] NET: Registered protocol family 10
[ 1.115003] Mobile IPv6
[ 1.115006] NET: Registered protocol family 17
[ 1.115011] Registering the dns_resolver key type
[ 1.115188] PM: Hibernation image not present or could not be loaded.
[ 1.115202] registered taskstats version 1
[ 1.115758] rtc_cmos 00:03: setting system clock to 2012-11-19 00:23:50 UTC (1353284630)
[ 1.115830] Initializing network drop monitor service
[ 1.117303] Freeing unused kernel memory: 576k freed
[ 1.117483] Write protecting the kernel read-only data: 6144k
[ 1.120480] Freeing unused kernel memory: 664k freed
[ 1.123691] Freeing unused kernel memory: 680k freed
[ 1.144115] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.205883] udevd[52]: starting version 175
[ 1.235157] usbcore: registered new interface driver usbfs
[ 1.235207] usbcore: registered new interface driver hub
[ 1.271006] SCSI subsystem initialized
[ 1.274339] tg3.c:v3.121 (November 2, 2011)
[ 1.274371] tg3 0000:05:00.0: setting latency timer to 64
[ 1.278583] usbcore: registered new device driver usb
[ 1.279161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.279219] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.279225] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.279253] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.279293] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.283193] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.283236] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x56304c00
[ 1.312036] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.312076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.312079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.312083] usb usb1: Product: EHCI Host Controller
[ 1.312085] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.312087] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.312231] hub 1-0:1.0: USB hub found
[ 1.312236] hub 1-0:1.0: 4 ports detected
[ 1.312372] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.312377] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.312387] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.312423] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.316300] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.320493] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.328654] tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1e:ec:4b:80:e9
[ 1.328660] tg3 0000:05:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.328665] tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.328668] tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.329244] libata version 3.00 loaded.
[ 1.344705] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x56304800
[ 1.350900] sdhci: Secure Digital Host Controller Interface driver
[ 1.350904] sdhci: Copyright(c) Pierre Ossman
[ 1.351217] sdhci-pci 0000:07:00.1: SDHCI controller found [1180:0822] (rev 22)
[ 1.352280] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.352290] sdhci-pci 0000:07:00.1: setting latency timer to 64
[ 1.352326] mmc0: no vmmc regulator found
[ 1.355254] Registered led device: mmc0::
[ 1.357529] mmc0: SDHCI controller on PCI [0000:07:00.1] using DMA
[ 1.357600] firewire_ohci 0000:07:00.0: setting latency timer to 64
[ 1.364181] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.364185] ACPI: Thermal Zone [TZ01] (45 C)
[ 1.368166] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.368205] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.368209] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.368212] usb usb2: Product: EHCI Host Controller
[ 1.368214] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.368217] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.368375] hub 2-0:1.0: USB hub found
[ 1.368382] hub 2-0:1.0: 6 ports detected
[ 1.368522] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.368528] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.368542] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.368597] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040c0
[ 1.368649] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.368653] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.368656] usb usb3: Product: UHCI Host Controller
[ 1.368658] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.368660] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.368786] hub 3-0:1.0: USB hub found
[ 1.368792] hub 3-0:1.0: 2 ports detected
[ 1.368887] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.368892] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.368901] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.368947] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040a0
[ 1.368992] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.368995] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.368997] usb usb4: Product: UHCI Host Controller
[ 1.369000] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.369002] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.369124] hub 4-0:1.0: USB hub found
[ 1.369129] hub 4-0:1.0: 2 ports detected
[ 1.369224] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.369228] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.369238] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.369270] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 1.369312] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.369315] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.369318] usb usb5: Product: UHCI Host Controller
[ 1.369320] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.369323] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.369439] hub 5-0:1.0: USB hub found
[ 1.369444] hub 5-0:1.0: 2 ports detected
[ 1.369537] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.369541] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.369551] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.369596] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 1.369647] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.369650] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.369653] usb usb6: Product: UHCI Host Controller
[ 1.369655] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.369658] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.369777] hub 6-0:1.0: USB hub found
[ 1.369782] hub 6-0:1.0: 2 ports detected
[ 1.369879] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.369883] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.369892] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.369925] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 1.369970] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.369974] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.369976] usb usb7: Product: UHCI Host Controller
[ 1.369979] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 1.369981] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.370272] hub 7-0:1.0: USB hub found
[ 1.370278] hub 7-0:1.0: 2 ports detected
[ 1.370557] ahci 0000:00:1f.2: version 3.0
[ 1.370633] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.370718] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.370722] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 1.370729] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.392139] scsi0 : ahci
[ 1.392386] scsi1 : ahci
[ 1.392463] scsi2 : ahci
[ 1.392678] ata1: SATA max UDMA/133 abar m2048@0x56304000 port 0x56304100 irq 43
[ 1.392683] ata2: SATA max UDMA/133 abar m2048@0x56304000 port 0x56304180 irq 43
[ 1.392687] ata3: SATA max UDMA/133 abar m2048@0x56304000 port 0x56304200 irq 43
[ 1.392746] ata_piix 0000:00:1f.1: version 2.13
[ 1.392809] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.393173] scsi3 : ata_piix
[ 1.393262] scsi4 : ata_piix
[ 1.393703] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40e0 irq 14
[ 1.393706] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40e8 irq 15
[ 1.420082] firewire_ohci: Added fw-ohci device 0000:07:00.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
[ 1.559473] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JP01, max UDMA/33
[ 1.572261] ata4.00: configured for UDMA/33
[ 1.624022] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.712033] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.712059] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.712087] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.713000] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.713351] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
[ 1.713354] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.714566] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.714916] ata1.00: configured for UDMA/133
[ 1.715068] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 1.718848] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T40N JP01 PQ: 0 ANSI: 5
[ 1.724927] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.725081] sd 0:0:0:0: [sda] Write Protect is off
[ 1.725085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.725111] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.730313] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.730316] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.730537] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.757536] usb 1-1: New USB device found, idVendor=7392, idProduct=7822
[ 1.757539] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.757542] usb 1-1: Product: 802.11n WLAN Adapter
[ 1.757545] usb 1-1: Manufacturer: Realtek
[ 1.757547] usb 1-1: SerialNumber: 00e04c000001
[ 1.794998] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.795613] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.798088] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.798158] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.868034] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 1.920121] firewire_core: created device fw0: GUID c740e01200023f85, S400
[ 2.004021] Refined TSC clocksource calibration: 1994.999 MHz.
[ 2.004027] Switching to clocksource tsc
[ 2.294378] usb 2-4: New USB device found, idVendor=5986, idProduct=0102
[ 2.294382] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.294385] usb 2-4: Product: Acer Crystal Eye webcam
[ 2.452036] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[ 2.573162] PM: Starting manual resume from disk
[ 2.573166] PM: Hibernation image partition 8:5 present
[ 2.573168] PM: Looking for hibernation image.
[ 2.573409] PM: Image not found (code -22)
[ 2.573411] PM: Hibernation image not present or could not be loaded.
[ 2.587498] usb 2-5: New USB device found, idVendor=0951, idProduct=1643
[ 2.587502] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.587505] usb 2-5: Product: DataTraveler G3
[ 2.587507] usb 2-5: Manufacturer: Kingston
[ 2.587509] usb 2-5: SerialNumber: F46D04613D14BCA1D931010E
[ 2.590109] usbcore: registered new interface driver uas
[ 2.591178] Initializing USB Mass Storage driver...
[ 2.591293] scsi5 : usb-storage 2-5:1.0
[ 2.591382] usbcore: registered new interface driver usb-storage
[ 2.591385] USB Mass Storage support registered.
[ 2.604810] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.589018] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 4
[ 3.589575] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 3.590383] sd 5:0:0:0: [sdb] 15187968 512-byte logical blocks: (7.77 GB/7.24 GiB)
[ 3.591377] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.591380] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.592503] sd 5:0:0:0: [sdb] No Caching mode page present
[ 3.592556] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3.596753] sd 5:0:0:0: [sdb] No Caching mode page present
[ 3.596804] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3.597767] sdb: sdb1
[ 3.601127] sd 5:0:0:0: [sdb] No Caching mode page present
[ 3.601178] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3.601230] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 4.979478] udevd[377]: starting version 175
[ 5.784136] ACPI: AC Adapter [AC] (on-line)
[ 5.784240] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0C:00/input/input1
[ 5.784248] ACPI: Power Button [PWRB]
[ 5.784321] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0D:00/input/input2
[ 5.784350] ACPI: Lid Switch [LID0]
[ 5.784415] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0E:00/input/input3
[ 5.784419] ACPI: Sleep Button [SLPB]
[ 5.784498] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.784502] ACPI: Power Button [PWRF]
[ 5.873942] ACPI: Requesting acpi_cpufreq
[ 5.880133] Monitor-Mwait will be used to enter C-1 state
[ 5.880140] Monitor-Mwait will be used to enter C-2 state
[ 5.880145] Monitor-Mwait will be used to enter C-3 state
[ 5.880150] Marking TSC unstable due to TSC halts in idle
[ 5.880164] ACPI: acpi_idle registered with cpuidle
[ 5.881153] Switching to clocksource hpet
[ 6.062378] IR NEC protocol handler initialized
[ 6.062589] ene_ir: chip is 0x3909 - kbver = 0x24, rev = 0xc0
[ 6.062591] ene_ir: PLL freq = 1406
[ 6.062593] ene_ir: KB3926B detected
[ 6.141924] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.350304] wmi: Mapper loaded
[ 6.473775] iTCO_vendor_support: vendor-support=0
[ 6.981358] Linux media interface: v0.10
[ 7.124756] cfg80211: Calling CRDA to update world regulatory domain
[ 7.559117] cfg80211: World regulatory domain updated:
[ 7.559123] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.559128] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.559134] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.559139] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.559144] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.559148] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.644229] ACPI: Battery Slot [BAT0] (battery present)
[ 7.668070] Registered IR keymap rc-rc6-mce
[ 7.668274] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input6
[ 7.668387] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 7.668649] ene_ir: driver has been successfully loaded
[ 7.768806] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 7.768969] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 7.769075] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.794628] Linux video capture interface: v2.00
[ 7.882753] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 7.890191] IR RC5(x) protocol handler initialized
[ 7.918769] [drm] Initialized drm 1.1.0 20060810
[ 7.920159] acer_wmi: Function bitmap for Communication Device: 0x0
[ 7.920331] acer_wmi: Brightness must be controlled by generic video driver
[ 7.954970] r592 0000:07:00.2: setting latency timer to 64
[ 7.955081] r592: driver successfully loaded
[ 7.962538] IR RC6 protocol handler initialized
[ 7.985589] IR JVC protocol handler initialized
[ 7.997255] IR Sony protocol handler initialized
[ 8.045981] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
[ 8.127168] i915 0000:00:02.0: setting latency timer to 64
[ 8.167838] r852 0000:07:00.3: setting latency timer to 64
[ 8.173273] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 8.173292] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.173294] [drm] Driver supports precise vblank timestamp query.
[ 8.173344] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.208149] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
[ 8.208288] usbcore: registered new interface driver uvcvideo
[ 8.208291] USB Video Class driver (1.1.1)
[ 8.226565] r852: driver loaded successfully
[ 8.227916] fixme: max PWM is zero.
[ 8.236282] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input8
[ 8.236449] IR MCE Keyboard/mouse protocol handler initialized
[ 8.251526] lirc_dev: IR Remote Control driver registered, major 250
[ 8.261674] rtl8192cu: MAC address: 80:1f:02:6e:48:d3
[ 8.261684] rtl8192cu: Board Type 0
[ 8.267670] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 8.267673] IR LIRC bridge handler initialized
[ 8.379797] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 8.379946] cfg80211: Calling CRDA for country: US
[ 8.385671] cfg80211: Regulatory domain changed to country: US
[ 8.385675] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.385679] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.385682] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 8.385686] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.385689] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.385692] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.385695] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 8.485250] [drm] initialized overlay support
[ 8.594367] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 8.595102] usbcore: registered new interface driver rtl8192cu
[ 8.652639] fbcon: inteldrmfb (fb0) is primary device
[ 8.930633] Console: switching to colour frame buffer device 180x56
[ 8.935513] fb0: inteldrmfb frame buffer device
[ 8.935515] drm: registered panic notifier
[ 8.960700] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[ 8.992770] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[ 9.336124] acpi device:3b: registered as cooling_device2
[ 9.336303] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[ 9.337086] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 9.337182] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.354485] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 9.354524] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 9.413640] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 9.419190] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.817570] Adding 1196804k swap on /dev/sda5. Priority:-1 extents:1 across:1196804k
[ 10.837662] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 11.419184] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.714160] device-mapper: uevent: version 1.0.3
[ 11.714430] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 11.950678] fuse init (API version 7.17)
[ 12.042226] loop: module loaded
[ 13.958714] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 14.081884] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 14.189315] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 15.617440] RPC: Registered named UNIX socket transport module.
[ 15.617447] RPC: Registered udp transport module.
[ 15.617451] RPC: Registered tcp transport module.
[ 15.617455] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.680797] FS-Cache: Loaded
[ 15.743494] FS-Cache: Netfs 'nfs' registered for caching
[ 15.771586] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.415810] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 22.391495] Bluetooth: Core ver 2.16
[ 22.391521] NET: Registered protocol family 31
[ 22.391523] Bluetooth: HCI device and connection manager initialized
[ 22.391527] Bluetooth: HCI socket layer initialized
[ 22.391529] Bluetooth: L2CAP socket layer initialized
[ 22.391536] Bluetooth: SCO socket layer initialized
[ 22.504198] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.504206] Bluetooth: BNEP filters: protocol multicast
[ 22.536874] Bluetooth: RFCOMM TTY layer initialized
[ 22.536881] Bluetooth: RFCOMM socket layer initialized
[ 22.536884] Bluetooth: RFCOMM ver 1.11
[ 25.268549] rtl8192cu: MAC auto ON okay!
[ 25.301308] rtl8192cu: Tx queue select: 0x05
[ 25.302079] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
[ 25.717662] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.722370] tg3 0000:05:00.0: irq 46 for MSI/MSI-X
[ 25.890531] ADDRCONF(NETDEV_UP): eth0: link is not ready
===> # iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
===> # uname -a
Linux localhost 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux
===> # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 7392:7822 Edimax Technology Co., Ltd
Bus 002 Device 002: ID 5986:0102 Acer, Inc Crystal Eye Webcam
Bus 002 Device 003: ID 0951:1643 Kingston Technology DataTraveler G3 4GB
===> # lsusb -v
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0503 highspeed power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0507 highspeed power suspend enable connect
Port 5: 0000.0503 highspeed power enable connect
Port 6: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.0-4-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 001 Device 002: ID 7392:7822 Edimax Technology Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x7392 Edimax Technology Co., Ltd
idProduct 0x7822
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n WLAN Adapter
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 002 Device 002: ID 5986:0102 Acer, Inc Crystal Eye Webcam
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x5986 Acer, Inc
idProduct 0x0102 Crystal Eye Webcam
bcdDevice 0.05
iManufacturer 0
iProduct 1 Acer Crystal Eye webcam
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 632
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 14 Video
bFunctionSubClass 3 Video Interface Collection
bFunctionProtocol 0
iFunction 1 Acer Crystal Eye webcam
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 1 Video Control
bInterfaceProtocol 0
iInterface 1 Acer Crystal Eye webcam
VideoControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdUVC 1.00
wTotalLength 84
dwClockFrequency 30.000000MHz
bInCollection 1
baInterfaceNr( 0) 1
VideoControl Interface Descriptor:
bLength 17
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0201 Camera Sensor
bAssocTerminal 0
iTerminal 0
wObjectiveFocalLengthMin 0
wObjectiveFocalLengthMax 0
wOcularFocalLength 0
bControlSize 2
bmControls 0x00000000
VideoControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 3
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 6
iTerminal 0
VideoControl Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 4 (SELECTOR_UNIT)
bUnitID 4
bNrInPins 1
baSource( 0) 1
iSelector 0
VideoControl Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 5 (PROCESSING_UNIT)
Warning: Descriptor too short
bUnitID 5
bSourceID 4
wMaxMultiplier 0
bControlSize 2
bmControls 0x0000053f
Brightness
Contrast
Hue
Saturation
Sharpness
Gamma
Backlight Compensation
Power Line Frequency
iProcessing 0
bmVideoStandards 0x1b
None
NTSC - 525/60
SECAM - 625/50
NTSC - 625/50
VideoControl Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 6
guidExtensionCode {564c97a7-7ea7-904b-8cbf-1c71ec303000}
bNumControl 16
bNrPins 1
baSourceID( 0) 5
bControlSize 2
bmControls( 0) 0xff
bmControls( 1) 0xff
iExtension 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
VideoStreaming Interface Descriptor:
bLength 15
bDescriptorType 36
bDescriptorSubtype 1 (INPUT_HEADER)
bNumFormats 2
wTotalLength 485
bEndPointAddress 129
bmInfo 0
bTerminalLink 3
bStillCaptureMethod 2
bTriggerSupport 1
bTriggerUsage 1
bControlSize 1
bmaControls( 0) 11
bmaControls( 1) 11
VideoStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 6 (FORMAT_MJPEG)
bFormatIndex 1
bNumFrameDescriptors 5
bFlags 1
Fixed-size samples: Yes
bDefaultFrameIndex 1
bAspectRatioX 0
bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 1 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 1
bmCapabilities 0x01
Still image supported
wWidth 640
wHeight 480
dwMinBitRate 912384
dwMaxBitRate 912384
dwMaxVideoFrameBufferSize 921600
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 2
bmCapabilities 0x01
Still image supported
wWidth 320
wHeight 240
dwMinBitRate 912384
dwMaxBitRate 912384
dwMaxVideoFrameBufferSize 230400
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 3
bmCapabilities 0x01
Still image supported
wWidth 160
wHeight 120
dwMinBitRate 912384
dwMaxBitRate 912384
dwMaxVideoFrameBufferSize 57600
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 4
bmCapabilities 0x01
Still image supported
wWidth 352
wHeight 288
dwMinBitRate 912384
dwMaxBitRate 912384
dwMaxVideoFrameBufferSize 304128
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 5
bmCapabilities 0x01
Still image supported
wWidth 176
wHeight 144
dwMinBitRate 912384
dwMaxBitRate 912384
dwMaxVideoFrameBufferSize 76032
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 3 (STILL_IMAGE_FRAME)
bEndpointAddress 0
bNumImageSizePatterns 5
wWidth( 0) 640
wHeight( 0) 480
wWidth( 1) 320
wHeight( 1) 240
wWidth( 2) 160
wHeight( 2) 120
wWidth( 3) 352
wHeight( 3) 288
wWidth( 4) 176
wHeight( 4) 144
bNumCompressionPatterns 5
VideoStreaming Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED)
bFormatIndex 2
bNumFrameDescriptors 5
guidFormat {59555932-0000-1000-8000-00aa00389b71}
bBitsPerPixel 16
bDefaultFrameIndex 1
bAspectRatioX 0
bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 2 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 1
bmCapabilities 0x01
Still image supported
wWidth 640
wHeight 480
dwMinBitRate 912384
dwMaxBitRate 912384
dwMaxVideoFrameBufferSize 614400
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 2
bmCapabilities 0x01
Still image supported
wWidth 320
wHeight 240
dwMinBitRate 912384
dwMaxBitRate 912384
dwMaxVideoFrameBufferSize 230400
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 3
bmCapabilities 0x01
Still image supported
wWidth 160
wHeight 120
dwMinBitRate 912384
dwMaxBitRate 912384
dwMaxVideoFrameBufferSize 57600
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 4
bmCapabilities 0x01
Still image supported
wWidth 352
wHeight 288
dwMinBitRate 912384
dwMaxBitRate 912384
dwMaxVideoFrameBufferSize 304128
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 38
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 5
bmCapabilities 0x01
Still image supported
wWidth 176
wHeight 144
dwMinBitRate 912384
dwMaxBitRate 912384
dwMaxVideoFrameBufferSize 76032
dwDefaultFrameInterval 333333
bFrameIntervalType 3
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
dwFrameInterval( 2) 1000000
VideoStreaming Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 3 (STILL_IMAGE_FRAME)
bEndpointAddress 0
bNumImageSizePatterns 5
wWidth( 0) 640
wHeight( 0) 480
wWidth( 1) 320
wHeight( 1) 240
wWidth( 2) 160
wHeight( 2) 120
wWidth( 3) 352
wHeight( 3) 288
wWidth( 4) 176
wHeight( 4) 144
bNumCompressionPatterns 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 002 Device 003: ID 0951:1643 Kingston Technology DataTraveler G3 4GB
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0951 Kingston Technology
idProduct 0x1643 DataTraveler G3 4GB
bcdDevice 1.00
iManufacturer 1 Kingston
iProduct 2 DataTraveler G3
iSerial 3 F46D04613D14BCA1D931010E
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
===> That's all.
----- Mail original -----
De: "Larry Finger" <Larry.Finger@lwfinger.net>
À: "sebastien major" <sebastien.major@free.fr>
Cc: linux-wireless@vger.kernel.org
Envoyé: Lundi 19 Novembre 2012 01:12:29
Objet: Re: Edimax EW-7612Aun does not work.
On 11/18/2012 05:54 PM, sebastien.major@free.fr wrote:
>
> Hello,
>
> All is said in title : my edimax refuse to start correctly.
>
> kernel choose to load rtl8192cu and appropriate firmware but nothing : I see a reply in dmesg which says "wlan10 : link not ready".
>
> tested on Acer laptop Core 2 duo with linux 3.6.7 freshly compiled by kpkg-buildpackage (Debian unstable).
>
> Edimax driver are old and for i386 (32 bits).
>
>
> Any doc is welcome : thanks by advance.
That problem is not likely due to rtl8192cu, but is related to some other issue.
What does 'rfkill list' show?
What distro do you use?
Larry
^ permalink raw reply [flat|nested] 4+ messages in thread
* Apologies ... Re: Edimax EW-7612Aun does not work.
2012-11-19 0:43 ` sebastien.major
@ 2012-11-20 2:05 ` sebastien.major
0 siblings, 0 replies; 4+ messages in thread
From: sebastien.major @ 2012-11-20 2:05 UTC (permalink / raw)
To: Larry Finger; +Cc: linux-wireless
Hello,
>First of all : many thanks for you done with Linux !!!
First of all : many thanks for all you done with Linux !!! And probably more, many thanks to take time for answered me too.
In fact, you were completely right : it's a distro issue.
I choose a last 3.6.7 stable kernel and it _works_ properly.
I think I forgot "ifconfig wlan0 up" and unstable debian distro is out.
Sorry for my disturb of your work.
Need to install one other similar wifi card : netgear WMA3100M and hope to get rid of ndiswrapper.
Best regards.
S. Major
----- Mail original -----
De: "sebastien major" <sebastien.major@free.fr>
À: "Larry Finger" <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Envoyé: Lundi 19 Novembre 2012 01:43:59
Objet: Re: Edimax EW-7612Aun does not work.
Hello,
First of all : many thanks for you done with Linux !!!
Ok.
I traced rfkill, iwconfig wlan0, uname -a, dmesg, lsusb and lsusb -v.
Best regards.
S. Major
Here it is :
===> # rfkill
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
I use debian unstable (updated last thursday).
Here some other traces :
===> # dmesg
[...]
===> That's all.
----- Mail original -----
De: "Larry Finger" <Larry.Finger@lwfinger.net>
À: "sebastien major" <sebastien.major@free.fr>
Cc: linux-wireless@vger.kernel.org
Envoyé: Lundi 19 Novembre 2012 01:12:29
Objet: Re: Edimax EW-7612Aun does not work.
On 11/18/2012 05:54 PM, sebastien.major@free.fr wrote:
>
> Hello,
>
> All is said in title : my edimax refuse to start correctly.
>
> kernel choose to load rtl8192cu and appropriate firmware but nothing : I see a reply in dmesg which says "wlan10 : link not ready".
>
> tested on Acer laptop Core 2 duo with linux 3.6.7 freshly compiled by kpkg-buildpackage (Debian unstable).
>
> Edimax driver are old and for i386 (32 bits).
>
>
> Any doc is welcome : thanks by advance.
That problem is not likely due to rtl8192cu, but is related to some other issue.
What does 'rfkill list' show?
What distro do you use?
Larry
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-11-20 2:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <767233844.63481367.1353282635209.JavaMail.root@zimbra4-e1.priv.proxad.net>
2012-11-18 23:54 ` Edimax EW-7612Aun does not work sebastien.major
2012-11-19 0:12 ` Larry Finger
2012-11-19 0:43 ` sebastien.major
2012-11-20 2:05 ` Apologies ... " sebastien.major
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.