All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
To: Will Deacon <will@kernel.org>, Rob Clark <robdclark@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>,
	Joerg Roedel <joro@8bytes.org>,
	Jordan Crouse <jcrouse@codeaurora.org>,
	Akhil P Oommen <akhilpo@codeaurora.org>,
	freedreno@lists.freedesktop.org,
	"Kristian H . Kristensen" <hoegsberg@google.com>,
	dri-devel@lists.freedesktop.org,
	iommu@lists.linux-foundation.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCHv8 0/8] System Cache support for GPU and required SMMU support
Date: Mon, 23 Nov 2020 22:31:48 +0530	[thread overview]
Message-ID: <50b68f2bdf9413b896fbe816ba4ddbc9@codeaurora.org> (raw)
In-Reply-To: <20201123152146.GE11033@willie-the-truck>

On 2020-11-23 20:51, Will Deacon wrote:
> On Tue, Nov 17, 2020 at 08:00:39PM +0530, Sai Prakash Ranjan wrote:
>> Some hardware variants contain a system cache or the last level
>> cache(llc). This cache is typically a large block which is shared
>> by multiple clients on the SOC. GPU uses the system cache to cache
>> both the GPU data buffers(like textures) as well the SMMU pagetables.
>> This helps with improved render performance as well as lower power
>> consumption by reducing the bus traffic to the system memory.
>> 
>> The system cache architecture allows the cache to be split into slices
>> which then be used by multiple SOC clients. This patch series is an
>> effort to enable and use two of those slices preallocated for the GPU,
>> one for the GPU data buffers and another for the GPU SMMU hardware
>> pagetables.
>> 
>> Patch 1 - Patch 6 adds system cache support in SMMU and GPU driver.
>> Patch 7 and 8 are minor cleanups for arm-smmu impl.
>> 
>> Changes in v8:
>>  * Introduce a generic domain attribute for pagetable config (Will)
>>  * Rename quirk to more generic IO_PGTABLE_QUIRK_ARM_OUTER_WBWA (Will)
>>  * Move non-strict mode to use new struct domain_attr_io_pgtbl_config 
>> (Will)
> 
> Modulo some minor comments I've made, this looks good to me. What is 
> the
> plan for merging it? I can take the IOMMU parts, but patches 4-6 touch 
> the
> MSM GPU driver and I'd like to avoid conflicts with that.
> 

SMMU bits are pretty much independent and GPU relies on the domain 
attribute
and the quirk exposed, so as long as SMMU changes go in first it should 
be good.
Rob?

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
To: Will Deacon <will@kernel.org>, Rob Clark <robdclark@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>,
	Akhil P Oommen <akhilpo@codeaurora.org>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org,
	"Kristian H . Kristensen" <hoegsberg@google.com>,
	linux-arm-msm@vger.kernel.org, freedreno@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCHv8 0/8] System Cache support for GPU and required SMMU support
Date: Mon, 23 Nov 2020 22:31:48 +0530	[thread overview]
Message-ID: <50b68f2bdf9413b896fbe816ba4ddbc9@codeaurora.org> (raw)
In-Reply-To: <20201123152146.GE11033@willie-the-truck>

On 2020-11-23 20:51, Will Deacon wrote:
> On Tue, Nov 17, 2020 at 08:00:39PM +0530, Sai Prakash Ranjan wrote:
>> Some hardware variants contain a system cache or the last level
>> cache(llc). This cache is typically a large block which is shared
>> by multiple clients on the SOC. GPU uses the system cache to cache
>> both the GPU data buffers(like textures) as well the SMMU pagetables.
>> This helps with improved render performance as well as lower power
>> consumption by reducing the bus traffic to the system memory.
>> 
>> The system cache architecture allows the cache to be split into slices
>> which then be used by multiple SOC clients. This patch series is an
>> effort to enable and use two of those slices preallocated for the GPU,
>> one for the GPU data buffers and another for the GPU SMMU hardware
>> pagetables.
>> 
>> Patch 1 - Patch 6 adds system cache support in SMMU and GPU driver.
>> Patch 7 and 8 are minor cleanups for arm-smmu impl.
>> 
>> Changes in v8:
>>  * Introduce a generic domain attribute for pagetable config (Will)
>>  * Rename quirk to more generic IO_PGTABLE_QUIRK_ARM_OUTER_WBWA (Will)
>>  * Move non-strict mode to use new struct domain_attr_io_pgtbl_config 
>> (Will)
> 
> Modulo some minor comments I've made, this looks good to me. What is 
> the
> plan for merging it? I can take the IOMMU parts, but patches 4-6 touch 
> the
> MSM GPU driver and I'd like to avoid conflicts with that.
> 

SMMU bits are pretty much independent and GPU relies on the domain 
attribute
and the quirk exposed, so as long as SMMU changes go in first it should 
be good.
Rob?

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

WARNING: multiple messages have this Message-ID (diff)
From: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
To: Will Deacon <will@kernel.org>, Rob Clark <robdclark@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>,
	Joerg Roedel <joro@8bytes.org>,
	Akhil P Oommen <akhilpo@codeaurora.org>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org,
	"Kristian H . Kristensen" <hoegsberg@google.com>,
	linux-arm-msm@vger.kernel.org, freedreno@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCHv8 0/8] System Cache support for GPU and required SMMU support
Date: Mon, 23 Nov 2020 22:31:48 +0530	[thread overview]
Message-ID: <50b68f2bdf9413b896fbe816ba4ddbc9@codeaurora.org> (raw)
In-Reply-To: <20201123152146.GE11033@willie-the-truck>

On 2020-11-23 20:51, Will Deacon wrote:
> On Tue, Nov 17, 2020 at 08:00:39PM +0530, Sai Prakash Ranjan wrote:
>> Some hardware variants contain a system cache or the last level
>> cache(llc). This cache is typically a large block which is shared
>> by multiple clients on the SOC. GPU uses the system cache to cache
>> both the GPU data buffers(like textures) as well the SMMU pagetables.
>> This helps with improved render performance as well as lower power
>> consumption by reducing the bus traffic to the system memory.
>> 
>> The system cache architecture allows the cache to be split into slices
>> which then be used by multiple SOC clients. This patch series is an
>> effort to enable and use two of those slices preallocated for the GPU,
>> one for the GPU data buffers and another for the GPU SMMU hardware
>> pagetables.
>> 
>> Patch 1 - Patch 6 adds system cache support in SMMU and GPU driver.
>> Patch 7 and 8 are minor cleanups for arm-smmu impl.
>> 
>> Changes in v8:
>>  * Introduce a generic domain attribute for pagetable config (Will)
>>  * Rename quirk to more generic IO_PGTABLE_QUIRK_ARM_OUTER_WBWA (Will)
>>  * Move non-strict mode to use new struct domain_attr_io_pgtbl_config 
>> (Will)
> 
> Modulo some minor comments I've made, this looks good to me. What is 
> the
> plan for merging it? I can take the IOMMU parts, but patches 4-6 touch 
> the
> MSM GPU driver and I'd like to avoid conflicts with that.
> 

SMMU bits are pretty much independent and GPU relies on the domain 
attribute
and the quirk exposed, so as long as SMMU changes go in first it should 
be good.
Rob?

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-11-23 17:02 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-17 14:30 [PATCHv8 0/8] System Cache support for GPU and required SMMU support Sai Prakash Ranjan
2020-11-17 14:30 ` Sai Prakash Ranjan
2020-11-17 14:30 ` Sai Prakash Ranjan
2020-11-17 14:30 ` [PATCHv8 1/8] iommu/io-pgtable-arm: Add support to use system cache Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-23 15:06   ` Will Deacon
2020-11-23 15:06     ` Will Deacon
2020-11-23 15:06     ` Will Deacon
2020-11-23 15:06     ` Will Deacon
2020-11-23 16:41     ` Sai Prakash Ranjan
2020-11-23 16:41       ` Sai Prakash Ranjan
2020-11-23 16:41       ` Sai Prakash Ranjan
2020-11-17 14:30 ` [PATCHv8 2/8] iommu/arm-smmu: Add domain attribute for pagetable configuration Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-23 15:18   ` Will Deacon
2020-11-23 15:18     ` Will Deacon
2020-11-23 15:18     ` Will Deacon
2020-11-23 15:18     ` Will Deacon
2020-11-23 16:42     ` Sai Prakash Ranjan
2020-11-23 16:42       ` Sai Prakash Ranjan
2020-11-23 16:42       ` Sai Prakash Ranjan
2020-11-17 14:30 ` [PATCHv8 3/8] iommu/arm-smmu: Move non-strict mode to use domain_attr_io_pgtbl_cfg Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-23 15:19   ` Will Deacon
2020-11-23 15:19     ` Will Deacon
2020-11-23 15:19     ` Will Deacon
2020-11-23 15:19     ` Will Deacon
2020-11-23 16:43     ` Sai Prakash Ranjan
2020-11-23 16:43       ` Sai Prakash Ranjan
2020-11-23 16:43       ` Sai Prakash Ranjan
2020-11-17 14:30 ` [PATCHv8 4/8] drm/msm: rearrange the gpu_rmw() function Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30 ` [PATCHv8 5/8] drm/msm/a6xx: Add support for using system cache(LLC) Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30 ` [PATCHv8 6/8] drm/msm/a6xx: Add support for using system cache on MMU500 based targets Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30 ` [PATCHv8 7/8] iommu: arm-smmu-impl: Use table to list QCOM implementations Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30 ` [PATCHv8 8/8] iommu: arm-smmu-impl: Add a space before open parenthesis Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-17 14:30   ` Sai Prakash Ranjan
2020-11-23 15:21 ` [PATCHv8 0/8] System Cache support for GPU and required SMMU support Will Deacon
2020-11-23 15:21   ` Will Deacon
2020-11-23 15:21   ` Will Deacon
2020-11-23 15:21   ` Will Deacon
2020-11-23 17:01   ` Sai Prakash Ranjan [this message]
2020-11-23 17:01     ` Sai Prakash Ranjan
2020-11-23 17:01     ` Sai Prakash Ranjan
2020-11-23 19:22     ` Rob Clark
2020-11-23 19:22       ` Rob Clark
2020-11-23 19:22       ` Rob Clark
2020-11-23 19:22       ` Rob Clark
2020-11-24  4:02       ` Sai Prakash Ranjan
2020-11-24  4:02         ` Sai Prakash Ranjan
2020-11-24  4:02         ` Sai Prakash Ranjan
2020-11-24 11:10         ` Will Deacon
2020-11-24 11:10           ` Will Deacon
2020-11-24 11:10           ` Will Deacon
2020-11-24 11:10           ` Will Deacon
2020-11-24 19:05           ` Rob Clark
2020-11-24 19:05             ` Rob Clark
2020-11-24 19:05             ` Rob Clark
2020-11-24 19:05             ` Rob Clark
2020-11-24 21:43             ` Will Deacon
2020-11-24 21:43               ` Will Deacon
2020-11-24 21:43               ` Will Deacon
2020-11-24 21:43               ` Will Deacon
2020-11-24 22:08               ` Rob Clark
2020-11-24 22:08                 ` Rob Clark
2020-11-24 22:08                 ` Rob Clark
2020-11-24 22:08                 ` Rob Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50b68f2bdf9413b896fbe816ba4ddbc9@codeaurora.org \
    --to=saiprakash.ranjan@codeaurora.org \
    --cc=akhilpo@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=hoegsberg@google.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jcrouse@codeaurora.org \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.