* [PATCHv4 RESEND 0/6] arm: vt8500: Add support for pinctrl/gpio module
@ 2013-04-02 4:40 ` Tony Prisk
0 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:40 UTC (permalink / raw)
To: linus.walleij
Cc: swarren, linux-arm-kernel, vt8500-wm8505-linux-kernel,
linux-kernel, Tony Prisk
Sorry - got Linus W's email address wrong in first send.
v4 changes:
Changed as requested by Stephen Warren:
Corrected the range checking in of_property_read_u32_index().
Fix configs[0] assignment in wmt_pctl_dt_node_to_map_pull().
Remove the kfree(maps) call, and use devm_kzalloc to simplify the fail path.
Drop the custom .of_xlate function and use the default of_gpio_simple_xlate.
Move the platform memory mapping from per-soc to common init.
v3 changes:
Rebased onto v3.9-rc4
Added the missing interrupt-controller info to the relevant dtsi files.
Removed the gpio-vt8500.txt binding along with the gpio driver.
Changes made as requested by Linux Walleij:
Removed the wm,pinmux property which has caused too much confusion, and left the
open-coded version in arm/arch-vt8500/vt8500.c until a proper solution
is sorted out.
Changes made as requested by Stephen Warren:
Defined an active-low flag for gpio since its useful and we will have a use-case
for it with our LCD power-on/off.
v2 changes:
Rebased onto v3.9-rc2
Changes made as requested by Linus Walleij:
Moved the files into drivers/pinctrl/vt8500/ to keep them tidy.
Changed readl/writel to *_relaxed variants.
Comment indentation corrected and remove additional whitespace.
Changed wmt_pctl_find_group_by_pin() error code from -1 to -EINVAL.
Removed OF read indexed-u32 function to OF subsystem.
General code tidy up as requested.
Changes made as requested by Stephen Warren:
Add binding information for interrupt generation.
Move optional properties to correct location in document.
This patch series removes the existing GPIO driver and replaces it with
a combined pinctrl+gpio driver.
Patch 1 - Add an OF function to read the nth u32 value from a property
listing multiple values.
Patch 2 - Increase the available GPIO space for the newly added gpios.
Because there is no hardware documentation from Wondermedia we don't know
how many GPIO's there actually are. New gpio pins have been located since
the original GPIO driver was written, hence the increase.
Patch 3 - The main pinctrl/gpio driver and the data for the 5 supported SoCs.
Each SoC is different, and therefore has its own data. This design was
borrowed from the Tegra pinctrl driver. The pin numbering is based on a
bank+pin encoding so that when other pin functions are found later on we can
add them without having to renumber existing pins.
Patch 4 - Update the SoC dts(i) files to support the new pinctrl driver.
Patch 5 - Remove the existing GPIO driver nodes from the dtsi's.
Patch 6 - Remove the existing GPIO driver.
I suspect this series may need to be broken up since there are two arm-soc
patches, and 4 pinctrl/gpio patches.
Patch 1 is required for the new driver to function properly.
Patch 2 is independant, but required for the driver to function properly.
Patches 3-4 are pinctrl/gpio patches.
Patch 5-6 remove the old gpio code which is no longer required.
Patch 2 could go via arm-soc if necessary.
Regards
Tony Prisk
Tony Prisk (6):
of: Add support for reading a u32 from a multi-value property.
arm: vt8500: Increase available GPIOs on arch-vt8500
pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500
arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl
driver
arm: vt8500: Remove gpio devicetree nodes
gpio: vt8500: Remove arch-vt8500 gpio driver
.../devicetree/bindings/gpio/gpio-vt8500.txt | 24 -
.../devicetree/bindings/pinctrl/pinctrl-vt8500.txt | 57 ++
arch/arm/Kconfig | 3 +-
arch/arm/boot/dts/vt8500.dtsi | 10 +-
arch/arm/boot/dts/wm8505.dtsi | 10 +-
arch/arm/boot/dts/wm8650.dtsi | 10 +-
arch/arm/boot/dts/wm8850.dtsi | 10 +-
arch/arm/mach-vt8500/Kconfig | 1 +
drivers/gpio/Kconfig | 6 -
drivers/gpio/Makefile | 1 -
drivers/gpio/gpio-vt8500.c | 355 -----------
drivers/of/base.c | 33 ++
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/vt8500/Kconfig | 52 ++
drivers/pinctrl/vt8500/Makefile | 8 +
drivers/pinctrl/vt8500/pinctrl-vt8500.c | 501 ++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8505.c | 532 +++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8650.c | 370 ++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8750.c | 409 +++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8850.c | 388 ++++++++++++
drivers/pinctrl/vt8500/pinctrl-wmt.c | 620 ++++++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wmt.h | 79 +++
include/linux/of.h | 9 +
24 files changed, 3087 insertions(+), 403 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
delete mode 100644 drivers/gpio/gpio-vt8500.c
create mode 100644 drivers/pinctrl/vt8500/Kconfig
create mode 100644 drivers/pinctrl/vt8500/Makefile
create mode 100644 drivers/pinctrl/vt8500/pinctrl-vt8500.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8505.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8650.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8750.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8850.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wmt.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wmt.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCHv4 RESEND 0/6] arm: vt8500: Add support for pinctrl/gpio module
@ 2013-04-02 4:40 ` Tony Prisk
0 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:40 UTC (permalink / raw)
To: linux-arm-kernel
Sorry - got Linus W's email address wrong in first send.
v4 changes:
Changed as requested by Stephen Warren:
Corrected the range checking in of_property_read_u32_index().
Fix configs[0] assignment in wmt_pctl_dt_node_to_map_pull().
Remove the kfree(maps) call, and use devm_kzalloc to simplify the fail path.
Drop the custom .of_xlate function and use the default of_gpio_simple_xlate.
Move the platform memory mapping from per-soc to common init.
v3 changes:
Rebased onto v3.9-rc4
Added the missing interrupt-controller info to the relevant dtsi files.
Removed the gpio-vt8500.txt binding along with the gpio driver.
Changes made as requested by Linux Walleij:
Removed the wm,pinmux property which has caused too much confusion, and left the
open-coded version in arm/arch-vt8500/vt8500.c until a proper solution
is sorted out.
Changes made as requested by Stephen Warren:
Defined an active-low flag for gpio since its useful and we will have a use-case
for it with our LCD power-on/off.
v2 changes:
Rebased onto v3.9-rc2
Changes made as requested by Linus Walleij:
Moved the files into drivers/pinctrl/vt8500/ to keep them tidy.
Changed readl/writel to *_relaxed variants.
Comment indentation corrected and remove additional whitespace.
Changed wmt_pctl_find_group_by_pin() error code from -1 to -EINVAL.
Removed OF read indexed-u32 function to OF subsystem.
General code tidy up as requested.
Changes made as requested by Stephen Warren:
Add binding information for interrupt generation.
Move optional properties to correct location in document.
This patch series removes the existing GPIO driver and replaces it with
a combined pinctrl+gpio driver.
Patch 1 - Add an OF function to read the nth u32 value from a property
listing multiple values.
Patch 2 - Increase the available GPIO space for the newly added gpios.
Because there is no hardware documentation from Wondermedia we don't know
how many GPIO's there actually are. New gpio pins have been located since
the original GPIO driver was written, hence the increase.
Patch 3 - The main pinctrl/gpio driver and the data for the 5 supported SoCs.
Each SoC is different, and therefore has its own data. This design was
borrowed from the Tegra pinctrl driver. The pin numbering is based on a
bank+pin encoding so that when other pin functions are found later on we can
add them without having to renumber existing pins.
Patch 4 - Update the SoC dts(i) files to support the new pinctrl driver.
Patch 5 - Remove the existing GPIO driver nodes from the dtsi's.
Patch 6 - Remove the existing GPIO driver.
I suspect this series may need to be broken up since there are two arm-soc
patches, and 4 pinctrl/gpio patches.
Patch 1 is required for the new driver to function properly.
Patch 2 is independant, but required for the driver to function properly.
Patches 3-4 are pinctrl/gpio patches.
Patch 5-6 remove the old gpio code which is no longer required.
Patch 2 could go via arm-soc if necessary.
Regards
Tony Prisk
Tony Prisk (6):
of: Add support for reading a u32 from a multi-value property.
arm: vt8500: Increase available GPIOs on arch-vt8500
pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500
arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl
driver
arm: vt8500: Remove gpio devicetree nodes
gpio: vt8500: Remove arch-vt8500 gpio driver
.../devicetree/bindings/gpio/gpio-vt8500.txt | 24 -
.../devicetree/bindings/pinctrl/pinctrl-vt8500.txt | 57 ++
arch/arm/Kconfig | 3 +-
arch/arm/boot/dts/vt8500.dtsi | 10 +-
arch/arm/boot/dts/wm8505.dtsi | 10 +-
arch/arm/boot/dts/wm8650.dtsi | 10 +-
arch/arm/boot/dts/wm8850.dtsi | 10 +-
arch/arm/mach-vt8500/Kconfig | 1 +
drivers/gpio/Kconfig | 6 -
drivers/gpio/Makefile | 1 -
drivers/gpio/gpio-vt8500.c | 355 -----------
drivers/of/base.c | 33 ++
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/vt8500/Kconfig | 52 ++
drivers/pinctrl/vt8500/Makefile | 8 +
drivers/pinctrl/vt8500/pinctrl-vt8500.c | 501 ++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8505.c | 532 +++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8650.c | 370 ++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8750.c | 409 +++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8850.c | 388 ++++++++++++
drivers/pinctrl/vt8500/pinctrl-wmt.c | 620 ++++++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wmt.h | 79 +++
include/linux/of.h | 9 +
24 files changed, 3087 insertions(+), 403 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
delete mode 100644 drivers/gpio/gpio-vt8500.c
create mode 100644 drivers/pinctrl/vt8500/Kconfig
create mode 100644 drivers/pinctrl/vt8500/Makefile
create mode 100644 drivers/pinctrl/vt8500/pinctrl-vt8500.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8505.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8650.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8750.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8850.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wmt.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wmt.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property.
2013-04-02 4:40 ` Tony Prisk
@ 2013-04-02 4:40 ` Tony Prisk
-1 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:40 UTC (permalink / raw)
To: linus.walleij
Cc: swarren, linux-arm-kernel, vt8500-wm8505-linux-kernel,
linux-kernel, Tony Prisk
This patch adds an of_property_read_u32_index() function to allow
reading a single indexed u32 value from a property containing multiple
u32 values.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
---
drivers/of/base.c | 33 +++++++++++++++++++++++++++++++++
include/linux/of.h | 9 +++++++++
2 files changed, 42 insertions(+)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 321d3ef..f6c89ed 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -746,6 +746,39 @@ struct device_node *of_find_node_by_phandle(phandle handle)
EXPORT_SYMBOL(of_find_node_by_phandle);
/**
+ * of_property_read_u32_index - Find and read a u32 from a multi-value property.
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the u32 in the list of values
+ * @out_value: pointer to return value, modified only if no error.
+ *
+ * Search for a property in a device node and read nth 32-bit value from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_value is modified only if a valid u32 value can be decoded.
+ */
+int of_property_read_u32_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u32 *out_value)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (((index + 1) * sizeof(*out_value)) > prop->length)
+ return -EOVERFLOW;
+
+ *out_value = be32_to_cpup(((__be32 *)prop->value) + index);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u32_index);
+
+/**
* of_property_read_u8_array - Find and read an array of u8 from a property.
*
* @np: device node from which the property value is to be read.
diff --git a/include/linux/of.h b/include/linux/of.h
index a0f1292..c0747a4 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -235,6 +235,9 @@ extern struct device_node *of_find_node_with_property(
extern struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp);
+extern int of_property_read_u32_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u32 *out_value);
extern int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz);
extern int of_property_read_u16_array(const struct device_node *np,
@@ -394,6 +397,12 @@ static inline struct device_node *of_find_compatible_node(
return NULL;
}
+static inline int of_property_read_u32_index(const struct device_node *np,
+ const char *propname, u32 index, u32 *out_value)
+{
+ return -ENOSYS;
+}
+
static inline int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz)
{
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property.
@ 2013-04-02 4:40 ` Tony Prisk
0 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:40 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds an of_property_read_u32_index() function to allow
reading a single indexed u32 value from a property containing multiple
u32 values.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
---
drivers/of/base.c | 33 +++++++++++++++++++++++++++++++++
include/linux/of.h | 9 +++++++++
2 files changed, 42 insertions(+)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 321d3ef..f6c89ed 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -746,6 +746,39 @@ struct device_node *of_find_node_by_phandle(phandle handle)
EXPORT_SYMBOL(of_find_node_by_phandle);
/**
+ * of_property_read_u32_index - Find and read a u32 from a multi-value property.
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the u32 in the list of values
+ * @out_value: pointer to return value, modified only if no error.
+ *
+ * Search for a property in a device node and read nth 32-bit value from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_value is modified only if a valid u32 value can be decoded.
+ */
+int of_property_read_u32_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u32 *out_value)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (((index + 1) * sizeof(*out_value)) > prop->length)
+ return -EOVERFLOW;
+
+ *out_value = be32_to_cpup(((__be32 *)prop->value) + index);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u32_index);
+
+/**
* of_property_read_u8_array - Find and read an array of u8 from a property.
*
* @np: device node from which the property value is to be read.
diff --git a/include/linux/of.h b/include/linux/of.h
index a0f1292..c0747a4 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -235,6 +235,9 @@ extern struct device_node *of_find_node_with_property(
extern struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp);
+extern int of_property_read_u32_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u32 *out_value);
extern int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz);
extern int of_property_read_u16_array(const struct device_node *np,
@@ -394,6 +397,12 @@ static inline struct device_node *of_find_compatible_node(
return NULL;
}
+static inline int of_property_read_u32_index(const struct device_node *np,
+ const char *propname, u32 index, u32 *out_value)
+{
+ return -ENOSYS;
+}
+
static inline int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz)
{
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 2/6] arm: vt8500: Increase available GPIOs on arch-vt8500
2013-04-02 4:40 ` Tony Prisk
@ 2013-04-02 4:40 ` Tony Prisk
-1 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:40 UTC (permalink / raw)
To: linus.walleij
Cc: swarren, linux-arm-kernel, vt8500-wm8505-linux-kernel,
linux-kernel, Tony Prisk
With the inclusion of the pin control driver, more GPIO pins have been
identified on the arch-vt8500 SoCs requiring an increase in the available
GPIOs.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 13b7394..244c618 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1661,7 +1661,8 @@ config ARCH_NR_GPIO
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 512 if SOC_OMAP5
default 355 if ARCH_U8500
- default 288 if ARCH_VT8500 || ARCH_SUNXI
+ default 352 if ARCH_VT8500
+ default 288 if ARCH_SUNXI
default 264 if MACH_H4700
default 0
help
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 2/6] arm: vt8500: Increase available GPIOs on arch-vt8500
@ 2013-04-02 4:40 ` Tony Prisk
0 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:40 UTC (permalink / raw)
To: linux-arm-kernel
With the inclusion of the pin control driver, more GPIO pins have been
identified on the arch-vt8500 SoCs requiring an increase in the available
GPIOs.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 13b7394..244c618 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1661,7 +1661,8 @@ config ARCH_NR_GPIO
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 512 if SOC_OMAP5
default 355 if ARCH_U8500
- default 288 if ARCH_VT8500 || ARCH_SUNXI
+ default 352 if ARCH_VT8500
+ default 288 if ARCH_SUNXI
default 264 if MACH_H4700
default 0
help
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 3/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500
2013-04-02 4:40 ` Tony Prisk
@ 2013-04-02 4:40 ` Tony Prisk
-1 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:40 UTC (permalink / raw)
To: linus.walleij
Cc: swarren, linux-arm-kernel, vt8500-wm8505-linux-kernel,
linux-kernel, Tony Prisk
This patch adds support for the GPIO/pinmux controller found on the VIA
VT8500 and Wondermedia WM8xxx-series SoCs.
Each pin within the controller is capable of operating as a GPIO or as
an alternate function. The pins are numbered according to their control
bank/bit so that if new pins are added, the existing numbering is maintained.
All currently supported SoCs are included: VT8500, WM8505, WM8650, WM8750 and
WM8850.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
---
.../devicetree/bindings/pinctrl/pinctrl-vt8500.txt | 57 ++
arch/arm/mach-vt8500/Kconfig | 1 +
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/vt8500/Kconfig | 52 ++
drivers/pinctrl/vt8500/Makefile | 8 +
drivers/pinctrl/vt8500/pinctrl-vt8500.c | 501 ++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8505.c | 532 +++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8650.c | 370 ++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8750.c | 409 +++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8850.c | 388 ++++++++++++
drivers/pinctrl/vt8500/pinctrl-wmt.c | 620 ++++++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wmt.h | 79 +++
13 files changed, 3019 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
create mode 100644 drivers/pinctrl/vt8500/Kconfig
create mode 100644 drivers/pinctrl/vt8500/Makefile
create mode 100644 drivers/pinctrl/vt8500/pinctrl-vt8500.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8505.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8650.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8750.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8850.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wmt.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wmt.h
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
new file mode 100644
index 0000000..b3aa90f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
@@ -0,0 +1,57 @@
+VIA VT8500 and Wondermedia WM8xxx-series pinmux/gpio controller
+
+These SoCs contain a combined Pinmux/GPIO module. Each pin may operate as
+either a GPIO in, GPIO out or as an alternate function (I2C, SPI etc).
+
+Required properties:
+- compatible: "via,vt8500-pinctrl", "wm,wm8505-pinctrl", "wm,wm8650-pinctrl",
+ "wm8750-pinctrl" or "wm,wm8850-pinctrl"
+- reg: Should contain the physical address of the module's registers.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters.
+ bit 0 - active low
+
+Please refer to ../gpio/gpio.txt for a general description of GPIO bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Each pin configuration node lists the pin(s) to which it applies, and one or
+more of the mux functions to select on those pin(s), and pull-up/down
+configuration. Each subnode only affects those parameters that are explicitly
+listed. In other words, a subnode that lists only a mux function implies no
+information about any pull configuration. Similarly, a subnode that lists only
+a pull parameter implies no information about the mux function.
+
+Required subnode-properties:
+- wm,pins: An array of cells. Each cell contains the ID of a pin.
+
+Optional subnode-properties:
+- wm,function: Integer, containing the function to mux to the pin(s):
+ 0: GPIO in
+ 1: GPIO out
+ 2: alternate
+
+- wm,pull: Integer, representing the pull-down/up to apply to the pin(s):
+ 0: none
+ 1: down
+ 2: up
+
+Each of wm,function and wm,pull may contain either a single value which
+will be applied to all pins in wm,pins, or one value for each entry in
+wm,pins.
+
+Example:
+
+ pinctrl: pinctrl {
+ compatible = "wm,wm8505-pinctrl";
+ reg = <0xD8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index e3e94b2..9b25293 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -7,6 +7,7 @@ config ARCH_VT8500
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select VT8500_TIMER
+ select PINCTRL
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 34f51d2..35e9400 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -229,6 +229,7 @@ config PINCTRL_EXYNOS5440
source "drivers/pinctrl/mvebu/Kconfig"
source "drivers/pinctrl/sh-pfc/Kconfig"
source "drivers/pinctrl/spear/Kconfig"
+source "drivers/pinctrl/vt8500/Kconfig"
config PINCTRL_XWAY
bool
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f82cc5b..a5a52c8 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -52,3 +52,4 @@ obj-$(CONFIG_PLAT_ORION) += mvebu/
obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/
obj-$(CONFIG_SUPERH) += sh-pfc/
obj-$(CONFIG_PLAT_SPEAR) += spear/
+obj-$(CONFIG_ARCH_VT8500) += vt8500/
diff --git a/drivers/pinctrl/vt8500/Kconfig b/drivers/pinctrl/vt8500/Kconfig
new file mode 100644
index 0000000..55724a7
--- /dev/null
+++ b/drivers/pinctrl/vt8500/Kconfig
@@ -0,0 +1,52 @@
+#
+# VIA/Wondermedia PINCTRL drivers
+#
+
+if ARCH_VT8500
+
+config PINCTRL_WMT
+ bool
+ select PINMUX
+ select GENERIC_PINCONF
+
+config PINCTRL_VT8500
+ bool "VIA VT8500 pin controller driver"
+ depends on ARCH_WM8505
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ VIA VT8500 SoCs.
+
+config PINCTRL_WM8505
+ bool "Wondermedia WM8505 pin controller driver"
+ depends on ARCH_WM8505
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8505 SoCs.
+
+config PINCTRL_WM8650
+ bool "Wondermedia WM8650 pin controller driver"
+ depends on ARCH_WM8505
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8650 SoCs.
+
+config PINCTRL_WM8750
+ bool "Wondermedia WM8750 pin controller driver"
+ depends on ARCH_WM8750
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8750 SoCs.
+
+config PINCTRL_WM8850
+ bool "Wondermedia WM8850 pin controller driver"
+ depends on ARCH_WM8850
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8850 SoCs.
+
+endif
diff --git a/drivers/pinctrl/vt8500/Makefile b/drivers/pinctrl/vt8500/Makefile
new file mode 100644
index 0000000..24ec45d
--- /dev/null
+++ b/drivers/pinctrl/vt8500/Makefile
@@ -0,0 +1,8 @@
+# VIA/Wondermedia pinctrl support
+
+obj-$(CONFIG_PINCTRL_WMT) += pinctrl-wmt.o
+obj-$(CONFIG_PINCTRL_VT8500) += pinctrl-vt8500.o
+obj-$(CONFIG_PINCTRL_WM8505) += pinctrl-wm8505.o
+obj-$(CONFIG_PINCTRL_WM8650) += pinctrl-wm8650.o
+obj-$(CONFIG_PINCTRL_WM8750) += pinctrl-wm8750.o
+obj-$(CONFIG_PINCTRL_WM8850) += pinctrl-wm8850.o
diff --git a/drivers/pinctrl/vt8500/pinctrl-vt8500.c b/drivers/pinctrl/vt8500/pinctrl-vt8500.c
new file mode 100644
index 0000000..f2fe9f8
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-vt8500.c
@@ -0,0 +1,501 @@
+/*
+ * Pinctrl data for VIA VT8500 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers vt8500_banks[] = {
+ WMT_PINCTRL_BANK(NO_REG, 0x3C, 0x5C, 0x7C, NO_REG, NO_REG), /* 0 */
+ WMT_PINCTRL_BANK(0x00, 0x20, 0x40, 0x60, NO_REG, NO_REG), /* 1 */
+ WMT_PINCTRL_BANK(0x04, 0x24, 0x44, 0x64, NO_REG, NO_REG), /* 2 */
+ WMT_PINCTRL_BANK(0x08, 0x28, 0x48, 0x68, NO_REG, NO_REG), /* 3 */
+ WMT_PINCTRL_BANK(0x0C, 0x2C, 0x4C, 0x6C, NO_REG, NO_REG), /* 4 */
+ WMT_PINCTRL_BANK(0x10, 0x30, 0x50, 0x70, NO_REG, NO_REG), /* 5 */
+ WMT_PINCTRL_BANK(0x14, 0x34, 0x54, 0x74, NO_REG, NO_REG), /* 6 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_EXTGPIO8 WMT_PIN(0, 8)
+#define WMT_PIN_UART0RTS WMT_PIN(1, 0)
+#define WMT_PIN_UART0TXD WMT_PIN(1, 1)
+#define WMT_PIN_UART0CTS WMT_PIN(1, 2)
+#define WMT_PIN_UART0RXD WMT_PIN(1, 3)
+#define WMT_PIN_UART1RTS WMT_PIN(1, 4)
+#define WMT_PIN_UART1TXD WMT_PIN(1, 5)
+#define WMT_PIN_UART1CTS WMT_PIN(1, 6)
+#define WMT_PIN_UART1RXD WMT_PIN(1, 7)
+#define WMT_PIN_SPI0CLK WMT_PIN(1, 8)
+#define WMT_PIN_SPI0SS WMT_PIN(1, 9)
+#define WMT_PIN_SPI0MISO WMT_PIN(1, 10)
+#define WMT_PIN_SPI0MOSI WMT_PIN(1, 11)
+#define WMT_PIN_SPI1CLK WMT_PIN(1, 12)
+#define WMT_PIN_SPI1SS WMT_PIN(1, 13)
+#define WMT_PIN_SPI1MISO WMT_PIN(1, 14)
+#define WMT_PIN_SPI1MOSI WMT_PIN(1, 15)
+#define WMT_PIN_SPI2CLK WMT_PIN(1, 16)
+#define WMT_PIN_SPI2SS WMT_PIN(1, 17)
+#define WMT_PIN_SPI2MISO WMT_PIN(1, 18)
+#define WMT_PIN_SPI2MOSI WMT_PIN(1, 19)
+#define WMT_PIN_SDDATA0 WMT_PIN(2, 0)
+#define WMT_PIN_SDDATA1 WMT_PIN(2, 1)
+#define WMT_PIN_SDDATA2 WMT_PIN(2, 2)
+#define WMT_PIN_SDDATA3 WMT_PIN(2, 3)
+#define WMT_PIN_MMCDATA0 WMT_PIN(2, 4)
+#define WMT_PIN_MMCDATA1 WMT_PIN(2, 5)
+#define WMT_PIN_MMCDATA2 WMT_PIN(2, 6)
+#define WMT_PIN_MMCDATA3 WMT_PIN(2, 7)
+#define WMT_PIN_SDCLK WMT_PIN(2, 8)
+#define WMT_PIN_SDWP WMT_PIN(2, 9)
+#define WMT_PIN_SDCMD WMT_PIN(2, 10)
+#define WMT_PIN_MSDATA0 WMT_PIN(2, 16)
+#define WMT_PIN_MSDATA1 WMT_PIN(2, 17)
+#define WMT_PIN_MSDATA2 WMT_PIN(2, 18)
+#define WMT_PIN_MSDATA3 WMT_PIN(2, 19)
+#define WMT_PIN_MSCLK WMT_PIN(2, 20)
+#define WMT_PIN_MSBS WMT_PIN(2, 21)
+#define WMT_PIN_MSINS WMT_PIN(2, 22)
+#define WMT_PIN_I2C0SCL WMT_PIN(2, 24)
+#define WMT_PIN_I2C0SDA WMT_PIN(2, 25)
+#define WMT_PIN_I2C1SCL WMT_PIN(2, 26)
+#define WMT_PIN_I2C1SDA WMT_PIN(2, 27)
+#define WMT_PIN_MII0RXD0 WMT_PIN(3, 0)
+#define WMT_PIN_MII0RXD1 WMT_PIN(3, 1)
+#define WMT_PIN_MII0RXD2 WMT_PIN(3, 2)
+#define WMT_PIN_MII0RXD3 WMT_PIN(3, 3)
+#define WMT_PIN_MII0RXCLK WMT_PIN(3, 4)
+#define WMT_PIN_MII0RXDV WMT_PIN(3, 5)
+#define WMT_PIN_MII0RXERR WMT_PIN(3, 6)
+#define WMT_PIN_MII0PHYRST WMT_PIN(3, 7)
+#define WMT_PIN_MII0TXD0 WMT_PIN(3, 8)
+#define WMT_PIN_MII0TXD1 WMT_PIN(3, 9)
+#define WMT_PIN_MII0TXD2 WMT_PIN(3, 10)
+#define WMT_PIN_MII0TXD3 WMT_PIN(3, 11)
+#define WMT_PIN_MII0TXCLK WMT_PIN(3, 12)
+#define WMT_PIN_MII0TXEN WMT_PIN(3, 13)
+#define WMT_PIN_MII0TXERR WMT_PIN(3, 14)
+#define WMT_PIN_MII0PHYPD WMT_PIN(3, 15)
+#define WMT_PIN_MII0COL WMT_PIN(3, 16)
+#define WMT_PIN_MII0CRS WMT_PIN(3, 17)
+#define WMT_PIN_MII0MDIO WMT_PIN(3, 18)
+#define WMT_PIN_MII0MDC WMT_PIN(3, 19)
+#define WMT_PIN_SEECS WMT_PIN(3, 20)
+#define WMT_PIN_SEECK WMT_PIN(3, 21)
+#define WMT_PIN_SEEDI WMT_PIN(3, 22)
+#define WMT_PIN_SEEDO WMT_PIN(3, 23)
+#define WMT_PIN_IDEDREQ0 WMT_PIN(3, 24)
+#define WMT_PIN_IDEDREQ1 WMT_PIN(3, 25)
+#define WMT_PIN_IDEIOW WMT_PIN(3, 26)
+#define WMT_PIN_IDEIOR WMT_PIN(3, 27)
+#define WMT_PIN_IDEDACK WMT_PIN(3, 28)
+#define WMT_PIN_IDEIORDY WMT_PIN(3, 29)
+#define WMT_PIN_IDEINTRQ WMT_PIN(3, 30)
+#define WMT_PIN_VDIN0 WMT_PIN(4, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(4, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(4, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(4, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(4, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(4, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(4, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(4, 7)
+#define WMT_PIN_VDOUT0 WMT_PIN(4, 8)
+#define WMT_PIN_VDOUT1 WMT_PIN(4, 9)
+#define WMT_PIN_VDOUT2 WMT_PIN(4, 10)
+#define WMT_PIN_VDOUT3 WMT_PIN(4, 11)
+#define WMT_PIN_VDOUT4 WMT_PIN(4, 12)
+#define WMT_PIN_VDOUT5 WMT_PIN(4, 13)
+#define WMT_PIN_NANDCLE0 WMT_PIN(4, 14)
+#define WMT_PIN_NANDCLE1 WMT_PIN(4, 15)
+#define WMT_PIN_VDOUT6_7 WMT_PIN(4, 16)
+#define WMT_PIN_VHSYNC WMT_PIN(4, 17)
+#define WMT_PIN_VVSYNC WMT_PIN(4, 18)
+#define WMT_PIN_TSDIN0 WMT_PIN(5, 8)
+#define WMT_PIN_TSDIN1 WMT_PIN(5, 9)
+#define WMT_PIN_TSDIN2 WMT_PIN(5, 10)
+#define WMT_PIN_TSDIN3 WMT_PIN(5, 11)
+#define WMT_PIN_TSDIN4 WMT_PIN(5, 12)
+#define WMT_PIN_TSDIN5 WMT_PIN(5, 13)
+#define WMT_PIN_TSDIN6 WMT_PIN(5, 14)
+#define WMT_PIN_TSDIN7 WMT_PIN(5, 15)
+#define WMT_PIN_TSSYNC WMT_PIN(5, 16)
+#define WMT_PIN_TSVALID WMT_PIN(5, 17)
+#define WMT_PIN_TSCLK WMT_PIN(5, 18)
+#define WMT_PIN_LCDD0 WMT_PIN(6, 0)
+#define WMT_PIN_LCDD1 WMT_PIN(6, 1)
+#define WMT_PIN_LCDD2 WMT_PIN(6, 2)
+#define WMT_PIN_LCDD3 WMT_PIN(6, 3)
+#define WMT_PIN_LCDD4 WMT_PIN(6, 4)
+#define WMT_PIN_LCDD5 WMT_PIN(6, 5)
+#define WMT_PIN_LCDD6 WMT_PIN(6, 6)
+#define WMT_PIN_LCDD7 WMT_PIN(6, 7)
+#define WMT_PIN_LCDD8 WMT_PIN(6, 8)
+#define WMT_PIN_LCDD9 WMT_PIN(6, 9)
+#define WMT_PIN_LCDD10 WMT_PIN(6, 10)
+#define WMT_PIN_LCDD11 WMT_PIN(6, 11)
+#define WMT_PIN_LCDD12 WMT_PIN(6, 12)
+#define WMT_PIN_LCDD13 WMT_PIN(6, 13)
+#define WMT_PIN_LCDD14 WMT_PIN(6, 14)
+#define WMT_PIN_LCDD15 WMT_PIN(6, 15)
+#define WMT_PIN_LCDD16 WMT_PIN(6, 16)
+#define WMT_PIN_LCDD17 WMT_PIN(6, 17)
+#define WMT_PIN_LCDCLK WMT_PIN(6, 18)
+#define WMT_PIN_LCDDEN WMT_PIN(6, 19)
+#define WMT_PIN_LCDLINE WMT_PIN(6, 20)
+#define WMT_PIN_LCDFRM WMT_PIN(6, 21)
+#define WMT_PIN_LCDBIAS WMT_PIN(6, 22)
+
+static const struct pinctrl_pin_desc vt8500_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO8, "extgpio8"),
+ PINCTRL_PIN(WMT_PIN_UART0RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI1CLK, "spi1_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI1SS, "spi1_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI1MOSI, "spi1_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI2CLK, "spi2_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI2SS, "spi2_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI2MISO, "spi2_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI2MOSI, "spi2_mosi"),
+ PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"),
+ PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"),
+ PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"),
+ PINCTRL_PIN(WMT_PIN_SDDATA3, "sd_data3"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA0, "mmc_data0"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA1, "mmc_data1"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA2, "mmc_data2"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA3, "mmc_data3"),
+ PINCTRL_PIN(WMT_PIN_SDCLK, "sd_clk"),
+ PINCTRL_PIN(WMT_PIN_SDWP, "sd_wp"),
+ PINCTRL_PIN(WMT_PIN_SDCMD, "sd_cmd"),
+ PINCTRL_PIN(WMT_PIN_MSDATA0, "ms_data0"),
+ PINCTRL_PIN(WMT_PIN_MSDATA1, "ms_data1"),
+ PINCTRL_PIN(WMT_PIN_MSDATA2, "ms_data2"),
+ PINCTRL_PIN(WMT_PIN_MSDATA3, "ms_data3"),
+ PINCTRL_PIN(WMT_PIN_MSCLK, "ms_clk"),
+ PINCTRL_PIN(WMT_PIN_MSBS, "ms_bs"),
+ PINCTRL_PIN(WMT_PIN_MSINS, "ms_ins"),
+ PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD0, "mii0_rxd0"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD1, "mii0_rxd1"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD2, "mii0_rxd2"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD3, "mii0_rxd3"),
+ PINCTRL_PIN(WMT_PIN_MII0RXCLK, "mii0_rxclk"),
+ PINCTRL_PIN(WMT_PIN_MII0RXDV, "mii0_rxdv"),
+ PINCTRL_PIN(WMT_PIN_MII0RXERR, "mii0_rxerr"),
+ PINCTRL_PIN(WMT_PIN_MII0PHYRST, "mii0_phyrst"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD0, "mii0_txd0"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD1, "mii0_txd1"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD2, "mii0_txd2"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD3, "mii0_txd3"),
+ PINCTRL_PIN(WMT_PIN_MII0TXCLK, "mii0_txclk"),
+ PINCTRL_PIN(WMT_PIN_MII0TXEN, "mii0_txen"),
+ PINCTRL_PIN(WMT_PIN_MII0TXERR, "mii0_txerr"),
+ PINCTRL_PIN(WMT_PIN_MII0PHYPD, "mii0_phypd"),
+ PINCTRL_PIN(WMT_PIN_MII0COL, "mii0_col"),
+ PINCTRL_PIN(WMT_PIN_MII0CRS, "mii0_crs"),
+ PINCTRL_PIN(WMT_PIN_MII0MDIO, "mii0_mdio"),
+ PINCTRL_PIN(WMT_PIN_MII0MDC, "mii0_mdc"),
+ PINCTRL_PIN(WMT_PIN_SEECS, "see_cs"),
+ PINCTRL_PIN(WMT_PIN_SEECK, "see_ck"),
+ PINCTRL_PIN(WMT_PIN_SEEDI, "see_di"),
+ PINCTRL_PIN(WMT_PIN_SEEDO, "see_do"),
+ PINCTRL_PIN(WMT_PIN_IDEDREQ0, "ide_dreq0"),
+ PINCTRL_PIN(WMT_PIN_IDEDREQ1, "ide_dreq1"),
+ PINCTRL_PIN(WMT_PIN_IDEIOW, "ide_iow"),
+ PINCTRL_PIN(WMT_PIN_IDEIOR, "ide_ior"),
+ PINCTRL_PIN(WMT_PIN_IDEDACK, "ide_dack"),
+ PINCTRL_PIN(WMT_PIN_IDEIORDY, "ide_iordy"),
+ PINCTRL_PIN(WMT_PIN_IDEINTRQ, "ide_intrq"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_NANDCLE0, "nand_cle0"),
+ PINCTRL_PIN(WMT_PIN_NANDCLE1, "nand_cle1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6_7, "vdout6_7"),
+ PINCTRL_PIN(WMT_PIN_VHSYNC, "vhsync"),
+ PINCTRL_PIN(WMT_PIN_VVSYNC, "vvsync"),
+ PINCTRL_PIN(WMT_PIN_TSDIN0, "tsdin0"),
+ PINCTRL_PIN(WMT_PIN_TSDIN1, "tsdin1"),
+ PINCTRL_PIN(WMT_PIN_TSDIN2, "tsdin2"),
+ PINCTRL_PIN(WMT_PIN_TSDIN3, "tsdin3"),
+ PINCTRL_PIN(WMT_PIN_TSDIN4, "tsdin4"),
+ PINCTRL_PIN(WMT_PIN_TSDIN5, "tsdin5"),
+ PINCTRL_PIN(WMT_PIN_TSDIN6, "tsdin6"),
+ PINCTRL_PIN(WMT_PIN_TSDIN7, "tsdin7"),
+ PINCTRL_PIN(WMT_PIN_TSSYNC, "tssync"),
+ PINCTRL_PIN(WMT_PIN_TSVALID, "tsvalid"),
+ PINCTRL_PIN(WMT_PIN_TSCLK, "tsclk"),
+ PINCTRL_PIN(WMT_PIN_LCDD0, "lcd_d0"),
+ PINCTRL_PIN(WMT_PIN_LCDD1, "lcd_d1"),
+ PINCTRL_PIN(WMT_PIN_LCDD2, "lcd_d2"),
+ PINCTRL_PIN(WMT_PIN_LCDD3, "lcd_d3"),
+ PINCTRL_PIN(WMT_PIN_LCDD4, "lcd_d4"),
+ PINCTRL_PIN(WMT_PIN_LCDD5, "lcd_d5"),
+ PINCTRL_PIN(WMT_PIN_LCDD6, "lcd_d6"),
+ PINCTRL_PIN(WMT_PIN_LCDD7, "lcd_d7"),
+ PINCTRL_PIN(WMT_PIN_LCDD8, "lcd_d8"),
+ PINCTRL_PIN(WMT_PIN_LCDD9, "lcd_d9"),
+ PINCTRL_PIN(WMT_PIN_LCDD10, "lcd_d10"),
+ PINCTRL_PIN(WMT_PIN_LCDD11, "lcd_d11"),
+ PINCTRL_PIN(WMT_PIN_LCDD12, "lcd_d12"),
+ PINCTRL_PIN(WMT_PIN_LCDD13, "lcd_d13"),
+ PINCTRL_PIN(WMT_PIN_LCDD14, "lcd_d14"),
+ PINCTRL_PIN(WMT_PIN_LCDD15, "lcd_d15"),
+ PINCTRL_PIN(WMT_PIN_LCDD16, "lcd_d16"),
+ PINCTRL_PIN(WMT_PIN_LCDD17, "lcd_d17"),
+ PINCTRL_PIN(WMT_PIN_LCDCLK, "lcd_clk"),
+ PINCTRL_PIN(WMT_PIN_LCDDEN, "lcd_den"),
+ PINCTRL_PIN(WMT_PIN_LCDLINE, "lcd_line"),
+ PINCTRL_PIN(WMT_PIN_LCDFRM, "lcd_frm"),
+ PINCTRL_PIN(WMT_PIN_LCDBIAS, "lcd_bias"),
+};
+
+/* Order of these names must match the above list */
+static const char * const vt8500_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "extgpio8",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "spi0_clk",
+ "spi0_ss",
+ "spi0_miso",
+ "spi0_mosi",
+ "spi1_clk",
+ "spi1_ss",
+ "spi1_miso",
+ "spi1_mosi",
+ "spi2_clk",
+ "spi2_ss",
+ "spi2_miso",
+ "spi2_mosi",
+ "sd_data0",
+ "sd_data1",
+ "sd_data2",
+ "sd_data3",
+ "mmc_data0",
+ "mmc_data1",
+ "mmc_data2",
+ "mmc_data3",
+ "sd_clk",
+ "sd_wp",
+ "sd_cmd",
+ "ms_data0",
+ "ms_data1",
+ "ms_data2",
+ "ms_data3",
+ "ms_clk",
+ "ms_bs",
+ "ms_ins",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "mii0_rxd0",
+ "mii0_rxd1",
+ "mii0_rxd2",
+ "mii0_rxd3",
+ "mii0_rxclk",
+ "mii0_rxdv",
+ "mii0_rxerr",
+ "mii0_phyrst",
+ "mii0_txd0",
+ "mii0_txd1",
+ "mii0_txd2",
+ "mii0_txd3",
+ "mii0_txclk",
+ "mii0_txen",
+ "mii0_txerr",
+ "mii0_phypd",
+ "mii0_col",
+ "mii0_crs",
+ "mii0_mdio",
+ "mii0_mdc",
+ "see_cs",
+ "see_ck",
+ "see_di",
+ "see_do",
+ "ide_dreq0",
+ "ide_dreq1",
+ "ide_iow",
+ "ide_ior",
+ "ide_dack",
+ "ide_iordy",
+ "ide_intrq",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "nand_cle0",
+ "nand_cle1",
+ "vdout6_7",
+ "vhsync",
+ "vvsync",
+ "tsdin0",
+ "tsdin1",
+ "tsdin2",
+ "tsdin3",
+ "tsdin4",
+ "tsdin5",
+ "tsdin6",
+ "tsdin7",
+ "tssync",
+ "tsvalid",
+ "tsclk",
+ "lcd_d0",
+ "lcd_d1",
+ "lcd_d2",
+ "lcd_d3",
+ "lcd_d4",
+ "lcd_d5",
+ "lcd_d6",
+ "lcd_d7",
+ "lcd_d8",
+ "lcd_d9",
+ "lcd_d10",
+ "lcd_d11",
+ "lcd_d12",
+ "lcd_d13",
+ "lcd_d14",
+ "lcd_d15",
+ "lcd_d16",
+ "lcd_d17",
+ "lcd_clk",
+ "lcd_den",
+ "lcd_line",
+ "lcd_frm",
+ "lcd_bias",
+};
+
+static int vt8500_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = vt8500_banks;
+ data->nbanks = ARRAY_SIZE(vt8500_banks);
+ data->pins = vt8500_pins;
+ data->npins = ARRAY_SIZE(vt8500_pins);
+ data->groups = vt8500_groups;
+ data->ngroups = ARRAY_SIZE(vt8500_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int vt8500_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "via,vt8500-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = vt8500_pinctrl_probe,
+ .remove = vt8500_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-vt8500",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("VIA VT8500 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8505.c b/drivers/pinctrl/vt8500/pinctrl-wm8505.c
new file mode 100644
index 0000000..483ba73
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8505.c
@@ -0,0 +1,532 @@
+/*
+ * Pinctrl data for Wondermedia WM8505 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8505_banks[] = {
+ WMT_PINCTRL_BANK(0x64, 0x8C, 0xB4, 0xDC, NO_REG, NO_REG), /* 0 */
+ WMT_PINCTRL_BANK(0x40, 0x68, 0x90, 0xB8, NO_REG, NO_REG), /* 1 */
+ WMT_PINCTRL_BANK(0x44, 0x6C, 0x94, 0xBC, NO_REG, NO_REG), /* 2 */
+ WMT_PINCTRL_BANK(0x48, 0x70, 0x98, 0xC0, NO_REG, NO_REG), /* 3 */
+ WMT_PINCTRL_BANK(0x4C, 0x74, 0x9C, 0xC4, NO_REG, NO_REG), /* 4 */
+ WMT_PINCTRL_BANK(0x50, 0x78, 0xA0, 0xC8, NO_REG, NO_REG), /* 5 */
+ WMT_PINCTRL_BANK(0x54, 0x7C, 0xA4, 0xD0, NO_REG, NO_REG), /* 6 */
+ WMT_PINCTRL_BANK(0x58, 0x80, 0xA8, 0xD4, NO_REG, NO_REG), /* 7 */
+ WMT_PINCTRL_BANK(0x5C, 0x84, 0xAC, 0xD8, NO_REG, NO_REG), /* 8 */
+ WMT_PINCTRL_BANK(0x60, 0x88, 0xB0, 0xDC, NO_REG, NO_REG), /* 9 */
+ WMT_PINCTRL_BANK(0x500, 0x504, 0x508, 0x50C, NO_REG, NO_REG), /* 10 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17)
+#define WMT_PIN_WAKEUP2 WMT_PIN(0, 18)
+#define WMT_PIN_WAKEUP3 WMT_PIN(0, 19)
+#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21)
+#define WMT_PIN_SDDATA0 WMT_PIN(1, 0)
+#define WMT_PIN_SDDATA1 WMT_PIN(1, 1)
+#define WMT_PIN_SDDATA2 WMT_PIN(1, 2)
+#define WMT_PIN_SDDATA3 WMT_PIN(1, 3)
+#define WMT_PIN_MMCDATA0 WMT_PIN(1, 4)
+#define WMT_PIN_MMCDATA1 WMT_PIN(1, 5)
+#define WMT_PIN_MMCDATA2 WMT_PIN(1, 6)
+#define WMT_PIN_MMCDATA3 WMT_PIN(1, 7)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_VDOUT0 WMT_PIN(2, 8)
+#define WMT_PIN_VDOUT1 WMT_PIN(2, 9)
+#define WMT_PIN_VDOUT2 WMT_PIN(2, 10)
+#define WMT_PIN_VDOUT3 WMT_PIN(2, 11)
+#define WMT_PIN_VDOUT4 WMT_PIN(2, 12)
+#define WMT_PIN_VDOUT5 WMT_PIN(2, 13)
+#define WMT_PIN_VDOUT6 WMT_PIN(2, 14)
+#define WMT_PIN_VDOUT7 WMT_PIN(2, 15)
+#define WMT_PIN_VDOUT8 WMT_PIN(2, 16)
+#define WMT_PIN_VDOUT9 WMT_PIN(2, 17)
+#define WMT_PIN_VDOUT10 WMT_PIN(2, 18)
+#define WMT_PIN_VDOUT11 WMT_PIN(2, 19)
+#define WMT_PIN_VDOUT12 WMT_PIN(2, 20)
+#define WMT_PIN_VDOUT13 WMT_PIN(2, 21)
+#define WMT_PIN_VDOUT14 WMT_PIN(2, 22)
+#define WMT_PIN_VDOUT15 WMT_PIN(2, 23)
+#define WMT_PIN_VDOUT16 WMT_PIN(2, 24)
+#define WMT_PIN_VDOUT17 WMT_PIN(2, 25)
+#define WMT_PIN_VDOUT18 WMT_PIN(2, 26)
+#define WMT_PIN_VDOUT19 WMT_PIN(2, 27)
+#define WMT_PIN_VDOUT20 WMT_PIN(2, 28)
+#define WMT_PIN_VDOUT21 WMT_PIN(2, 29)
+#define WMT_PIN_VDOUT22 WMT_PIN(2, 30)
+#define WMT_PIN_VDOUT23 WMT_PIN(2, 31)
+#define WMT_PIN_VHSYNC WMT_PIN(3, 0)
+#define WMT_PIN_VVSYNC WMT_PIN(3, 1)
+#define WMT_PIN_VGAHSYNC WMT_PIN(3, 2)
+#define WMT_PIN_VGAVSYNC WMT_PIN(3, 3)
+#define WMT_PIN_VDHSYNC WMT_PIN(3, 4)
+#define WMT_PIN_VDVSYNC WMT_PIN(3, 5)
+#define WMT_PIN_NORD0 WMT_PIN(4, 0)
+#define WMT_PIN_NORD1 WMT_PIN(4, 1)
+#define WMT_PIN_NORD2 WMT_PIN(4, 2)
+#define WMT_PIN_NORD3 WMT_PIN(4, 3)
+#define WMT_PIN_NORD4 WMT_PIN(4, 4)
+#define WMT_PIN_NORD5 WMT_PIN(4, 5)
+#define WMT_PIN_NORD6 WMT_PIN(4, 6)
+#define WMT_PIN_NORD7 WMT_PIN(4, 7)
+#define WMT_PIN_NORD8 WMT_PIN(4, 8)
+#define WMT_PIN_NORD9 WMT_PIN(4, 9)
+#define WMT_PIN_NORD10 WMT_PIN(4, 10)
+#define WMT_PIN_NORD11 WMT_PIN(4, 11)
+#define WMT_PIN_NORD12 WMT_PIN(4, 12)
+#define WMT_PIN_NORD13 WMT_PIN(4, 13)
+#define WMT_PIN_NORD14 WMT_PIN(4, 14)
+#define WMT_PIN_NORD15 WMT_PIN(4, 15)
+#define WMT_PIN_NORA0 WMT_PIN(5, 0)
+#define WMT_PIN_NORA1 WMT_PIN(5, 1)
+#define WMT_PIN_NORA2 WMT_PIN(5, 2)
+#define WMT_PIN_NORA3 WMT_PIN(5, 3)
+#define WMT_PIN_NORA4 WMT_PIN(5, 4)
+#define WMT_PIN_NORA5 WMT_PIN(5, 5)
+#define WMT_PIN_NORA6 WMT_PIN(5, 6)
+#define WMT_PIN_NORA7 WMT_PIN(5, 7)
+#define WMT_PIN_NORA8 WMT_PIN(5, 8)
+#define WMT_PIN_NORA9 WMT_PIN(5, 9)
+#define WMT_PIN_NORA10 WMT_PIN(5, 10)
+#define WMT_PIN_NORA11 WMT_PIN(5, 11)
+#define WMT_PIN_NORA12 WMT_PIN(5, 12)
+#define WMT_PIN_NORA13 WMT_PIN(5, 13)
+#define WMT_PIN_NORA14 WMT_PIN(5, 14)
+#define WMT_PIN_NORA15 WMT_PIN(5, 15)
+#define WMT_PIN_NORA16 WMT_PIN(5, 16)
+#define WMT_PIN_NORA17 WMT_PIN(5, 17)
+#define WMT_PIN_NORA18 WMT_PIN(5, 18)
+#define WMT_PIN_NORA19 WMT_PIN(5, 19)
+#define WMT_PIN_NORA20 WMT_PIN(5, 20)
+#define WMT_PIN_NORA21 WMT_PIN(5, 21)
+#define WMT_PIN_NORA22 WMT_PIN(5, 22)
+#define WMT_PIN_NORA23 WMT_PIN(5, 23)
+#define WMT_PIN_NORA24 WMT_PIN(5, 24)
+#define WMT_PIN_AC97SDI WMT_PIN(6, 0)
+#define WMT_PIN_AC97SYNC WMT_PIN(6, 1)
+#define WMT_PIN_AC97SDO WMT_PIN(6, 2)
+#define WMT_PIN_AC97BCLK WMT_PIN(6, 3)
+#define WMT_PIN_AC97RST WMT_PIN(6, 4)
+#define WMT_PIN_SFDO WMT_PIN(7, 0)
+#define WMT_PIN_SFCS0 WMT_PIN(7, 1)
+#define WMT_PIN_SFCS1 WMT_PIN(7, 2)
+#define WMT_PIN_SFCLK WMT_PIN(7, 3)
+#define WMT_PIN_SFDI WMT_PIN(7, 4)
+#define WMT_PIN_SPI0CLK WMT_PIN(8, 0)
+#define WMT_PIN_SPI0MISO WMT_PIN(8, 1)
+#define WMT_PIN_SPI0MOSI WMT_PIN(8, 2)
+#define WMT_PIN_SPI0SS WMT_PIN(8, 3)
+#define WMT_PIN_SPI1CLK WMT_PIN(8, 4)
+#define WMT_PIN_SPI1MISO WMT_PIN(8, 5)
+#define WMT_PIN_SPI1MOSI WMT_PIN(8, 6)
+#define WMT_PIN_SPI1SS WMT_PIN(8, 7)
+#define WMT_PIN_SPI2CLK WMT_PIN(8, 8)
+#define WMT_PIN_SPI2MISO WMT_PIN(8, 9)
+#define WMT_PIN_SPI2MOSI WMT_PIN(8, 10)
+#define WMT_PIN_SPI2SS WMT_PIN(8, 11)
+#define WMT_PIN_UART0_RTS WMT_PIN(9, 0)
+#define WMT_PIN_UART0_TXD WMT_PIN(9, 1)
+#define WMT_PIN_UART0_CTS WMT_PIN(9, 2)
+#define WMT_PIN_UART0_RXD WMT_PIN(9, 3)
+#define WMT_PIN_UART1_RTS WMT_PIN(9, 4)
+#define WMT_PIN_UART1_TXD WMT_PIN(9, 5)
+#define WMT_PIN_UART1_CTS WMT_PIN(9, 6)
+#define WMT_PIN_UART1_RXD WMT_PIN(9, 7)
+#define WMT_PIN_UART2_RTS WMT_PIN(9, 8)
+#define WMT_PIN_UART2_TXD WMT_PIN(9, 9)
+#define WMT_PIN_UART2_CTS WMT_PIN(9, 10)
+#define WMT_PIN_UART2_RXD WMT_PIN(9, 11)
+#define WMT_PIN_UART3_RTS WMT_PIN(9, 12)
+#define WMT_PIN_UART3_TXD WMT_PIN(9, 13)
+#define WMT_PIN_UART3_CTS WMT_PIN(9, 14)
+#define WMT_PIN_UART3_RXD WMT_PIN(9, 15)
+#define WMT_PIN_I2C0SCL WMT_PIN(10, 0)
+#define WMT_PIN_I2C0SDA WMT_PIN(10, 1)
+#define WMT_PIN_I2C1SCL WMT_PIN(10, 2)
+#define WMT_PIN_I2C1SDA WMT_PIN(10, 3)
+#define WMT_PIN_I2C2SCL WMT_PIN(10, 4)
+#define WMT_PIN_I2C2SDA WMT_PIN(10, 5)
+
+static const struct pinctrl_pin_desc wm8505_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
+ PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"),
+ PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"),
+ PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"),
+ PINCTRL_PIN(WMT_PIN_SDDATA3, "sd_data3"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA0, "mmc_data0"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA1, "mmc_data1"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA2, "mmc_data2"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA3, "mmc_data3"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VHSYNC, "v_hsync"),
+ PINCTRL_PIN(WMT_PIN_VVSYNC, "v_vsync"),
+ PINCTRL_PIN(WMT_PIN_VGAHSYNC, "vga_hsync"),
+ PINCTRL_PIN(WMT_PIN_VGAVSYNC, "vga_vsync"),
+ PINCTRL_PIN(WMT_PIN_VDHSYNC, "vd_hsync"),
+ PINCTRL_PIN(WMT_PIN_VDVSYNC, "vd_vsync"),
+ PINCTRL_PIN(WMT_PIN_NORD0, "nor_d0"),
+ PINCTRL_PIN(WMT_PIN_NORD1, "nor_d1"),
+ PINCTRL_PIN(WMT_PIN_NORD2, "nor_d2"),
+ PINCTRL_PIN(WMT_PIN_NORD3, "nor_d3"),
+ PINCTRL_PIN(WMT_PIN_NORD4, "nor_d4"),
+ PINCTRL_PIN(WMT_PIN_NORD5, "nor_d5"),
+ PINCTRL_PIN(WMT_PIN_NORD6, "nor_d6"),
+ PINCTRL_PIN(WMT_PIN_NORD7, "nor_d7"),
+ PINCTRL_PIN(WMT_PIN_NORD8, "nor_d8"),
+ PINCTRL_PIN(WMT_PIN_NORD9, "nor_d9"),
+ PINCTRL_PIN(WMT_PIN_NORD10, "nor_d10"),
+ PINCTRL_PIN(WMT_PIN_NORD11, "nor_d11"),
+ PINCTRL_PIN(WMT_PIN_NORD12, "nor_d12"),
+ PINCTRL_PIN(WMT_PIN_NORD13, "nor_d13"),
+ PINCTRL_PIN(WMT_PIN_NORD14, "nor_d14"),
+ PINCTRL_PIN(WMT_PIN_NORD15, "nor_d15"),
+ PINCTRL_PIN(WMT_PIN_NORA0, "nor_a0"),
+ PINCTRL_PIN(WMT_PIN_NORA1, "nor_a1"),
+ PINCTRL_PIN(WMT_PIN_NORA2, "nor_a2"),
+ PINCTRL_PIN(WMT_PIN_NORA3, "nor_a3"),
+ PINCTRL_PIN(WMT_PIN_NORA4, "nor_a4"),
+ PINCTRL_PIN(WMT_PIN_NORA5, "nor_a5"),
+ PINCTRL_PIN(WMT_PIN_NORA6, "nor_a6"),
+ PINCTRL_PIN(WMT_PIN_NORA7, "nor_a7"),
+ PINCTRL_PIN(WMT_PIN_NORA8, "nor_a8"),
+ PINCTRL_PIN(WMT_PIN_NORA9, "nor_a9"),
+ PINCTRL_PIN(WMT_PIN_NORA10, "nor_a10"),
+ PINCTRL_PIN(WMT_PIN_NORA11, "nor_a11"),
+ PINCTRL_PIN(WMT_PIN_NORA12, "nor_a12"),
+ PINCTRL_PIN(WMT_PIN_NORA13, "nor_a13"),
+ PINCTRL_PIN(WMT_PIN_NORA14, "nor_a14"),
+ PINCTRL_PIN(WMT_PIN_NORA15, "nor_a15"),
+ PINCTRL_PIN(WMT_PIN_NORA16, "nor_a16"),
+ PINCTRL_PIN(WMT_PIN_NORA17, "nor_a17"),
+ PINCTRL_PIN(WMT_PIN_NORA18, "nor_a18"),
+ PINCTRL_PIN(WMT_PIN_NORA19, "nor_a19"),
+ PINCTRL_PIN(WMT_PIN_NORA20, "nor_a20"),
+ PINCTRL_PIN(WMT_PIN_NORA21, "nor_a21"),
+ PINCTRL_PIN(WMT_PIN_NORA22, "nor_a22"),
+ PINCTRL_PIN(WMT_PIN_NORA23, "nor_a23"),
+ PINCTRL_PIN(WMT_PIN_NORA24, "nor_a24"),
+ PINCTRL_PIN(WMT_PIN_AC97SDI, "ac97_sdi"),
+ PINCTRL_PIN(WMT_PIN_AC97SYNC, "ac97_sync"),
+ PINCTRL_PIN(WMT_PIN_AC97SDO, "ac97_sdo"),
+ PINCTRL_PIN(WMT_PIN_AC97BCLK, "ac97_bclk"),
+ PINCTRL_PIN(WMT_PIN_AC97RST, "ac97_rst"),
+ PINCTRL_PIN(WMT_PIN_SFDO, "sf_do"),
+ PINCTRL_PIN(WMT_PIN_SFCS0, "sf_cs0"),
+ PINCTRL_PIN(WMT_PIN_SFCS1, "sf_cs1"),
+ PINCTRL_PIN(WMT_PIN_SFCLK, "sf_clk"),
+ PINCTRL_PIN(WMT_PIN_SFDI, "sf_di"),
+ PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI1CLK, "spi1_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI1MOSI, "spi1_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI1SS, "spi1_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI2CLK, "spi2_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI2MISO, "spi2_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI2MOSI, "spi2_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI2SS, "spi2_ss"),
+ PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART3_RTS, "uart3_rts"),
+ PINCTRL_PIN(WMT_PIN_UART3_TXD, "uart3_txd"),
+ PINCTRL_PIN(WMT_PIN_UART3_CTS, "uart3_cts"),
+ PINCTRL_PIN(WMT_PIN_UART3_RXD, "uart3_rxd"),
+ PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C2SCL, "i2c2_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C2SDA, "i2c2_sda"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8505_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "wakeup2",
+ "wakeup3",
+ "susgpio0",
+ "sd_data0",
+ "sd_data1",
+ "sd_data2",
+ "sd_data3",
+ "mmc_data0",
+ "mmc_data1",
+ "mmc_data2",
+ "mmc_data3",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "v_hsync",
+ "v_vsync",
+ "vga_hsync",
+ "vga_vsync",
+ "vd_hsync",
+ "vd_vsync",
+ "nor_d0",
+ "nor_d1",
+ "nor_d2",
+ "nor_d3",
+ "nor_d4",
+ "nor_d5",
+ "nor_d6",
+ "nor_d7",
+ "nor_d8",
+ "nor_d9",
+ "nor_d10",
+ "nor_d11",
+ "nor_d12",
+ "nor_d13",
+ "nor_d14",
+ "nor_d15",
+ "nor_a0",
+ "nor_a1",
+ "nor_a2",
+ "nor_a3",
+ "nor_a4",
+ "nor_a5",
+ "nor_a6",
+ "nor_a7",
+ "nor_a8",
+ "nor_a9",
+ "nor_a10",
+ "nor_a11",
+ "nor_a12",
+ "nor_a13",
+ "nor_a14",
+ "nor_a15",
+ "nor_a16",
+ "nor_a17",
+ "nor_a18",
+ "nor_a19",
+ "nor_a20",
+ "nor_a21",
+ "nor_a22",
+ "nor_a23",
+ "nor_a24",
+ "ac97_sdi",
+ "ac97_sync",
+ "ac97_sdo",
+ "ac97_bclk",
+ "ac97_rst",
+ "sf_do",
+ "sf_cs0",
+ "sf_cs1",
+ "sf_clk",
+ "sf_di",
+ "spi0_clk",
+ "spi0_miso",
+ "spi0_mosi",
+ "spi0_ss",
+ "spi1_clk",
+ "spi1_miso",
+ "spi1_mosi",
+ "spi1_ss",
+ "spi2_clk",
+ "spi2_miso",
+ "spi2_mosi",
+ "spi2_ss",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "uart3_rts",
+ "uart3_txd",
+ "uart3_cts",
+ "uart3_rxd",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "i2c2_scl",
+ "i2c2_sda",
+};
+
+static int wm8505_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8505_banks;
+ data->nbanks = ARRAY_SIZE(wm8505_banks);
+ data->pins = wm8505_pins;
+ data->npins = ARRAY_SIZE(wm8505_pins);
+ data->groups = wm8505_groups;
+ data->ngroups = ARRAY_SIZE(wm8505_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8505_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8505-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8505_pinctrl_probe,
+ .remove = wm8505_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8505",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8505 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8650.c b/drivers/pinctrl/vt8500/pinctrl-wm8650.c
new file mode 100644
index 0000000..7de57f0
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8650.c
@@ -0,0 +1,370 @@
+/*
+ * Pinctrl data for Wondermedia WM8650 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8650_banks[] = {
+ WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
+ WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
+ WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
+ WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
+ WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
+ WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
+ WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
+ WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17)
+#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21)
+#define WMT_PIN_SD0CD WMT_PIN(0, 28)
+#define WMT_PIN_SD1CD WMT_PIN(0, 29)
+#define WMT_PIN_VDOUT0 WMT_PIN(1, 0)
+#define WMT_PIN_VDOUT1 WMT_PIN(1, 1)
+#define WMT_PIN_VDOUT2 WMT_PIN(1, 2)
+#define WMT_PIN_VDOUT3 WMT_PIN(1, 3)
+#define WMT_PIN_VDOUT4 WMT_PIN(1, 4)
+#define WMT_PIN_VDOUT5 WMT_PIN(1, 5)
+#define WMT_PIN_VDOUT6 WMT_PIN(1, 6)
+#define WMT_PIN_VDOUT7 WMT_PIN(1, 7)
+#define WMT_PIN_VDOUT8 WMT_PIN(1, 8)
+#define WMT_PIN_VDOUT9 WMT_PIN(1, 9)
+#define WMT_PIN_VDOUT10 WMT_PIN(1, 10)
+#define WMT_PIN_VDOUT11 WMT_PIN(1, 11)
+#define WMT_PIN_VDOUT12 WMT_PIN(1, 12)
+#define WMT_PIN_VDOUT13 WMT_PIN(1, 13)
+#define WMT_PIN_VDOUT14 WMT_PIN(1, 14)
+#define WMT_PIN_VDOUT15 WMT_PIN(1, 15)
+#define WMT_PIN_VDOUT16 WMT_PIN(1, 16)
+#define WMT_PIN_VDOUT17 WMT_PIN(1, 17)
+#define WMT_PIN_VDOUT18 WMT_PIN(1, 18)
+#define WMT_PIN_VDOUT19 WMT_PIN(1, 19)
+#define WMT_PIN_VDOUT20 WMT_PIN(1, 20)
+#define WMT_PIN_VDOUT21 WMT_PIN(1, 21)
+#define WMT_PIN_VDOUT22 WMT_PIN(1, 22)
+#define WMT_PIN_VDOUT23 WMT_PIN(1, 23)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_I2C1SCL WMT_PIN(2, 12)
+#define WMT_PIN_I2C1SDA WMT_PIN(2, 13)
+#define WMT_PIN_SPI0MOSI WMT_PIN(2, 24)
+#define WMT_PIN_SPI0MISO WMT_PIN(2, 25)
+#define WMT_PIN_SPI0SS0 WMT_PIN(2, 26)
+#define WMT_PIN_SPI0CLK WMT_PIN(2, 27)
+#define WMT_PIN_SD0DATA0 WMT_PIN(3, 8)
+#define WMT_PIN_SD0DATA1 WMT_PIN(3, 9)
+#define WMT_PIN_SD0DATA2 WMT_PIN(3, 10)
+#define WMT_PIN_SD0DATA3 WMT_PIN(3, 11)
+#define WMT_PIN_SD0CLK WMT_PIN(3, 12)
+#define WMT_PIN_SD0WP WMT_PIN(3, 13)
+#define WMT_PIN_SD0CMD WMT_PIN(3, 14)
+#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24)
+#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25)
+#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26)
+#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27)
+#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28)
+#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29)
+#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30)
+#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31)
+#define WMT_PIN_I2C0SCL WMT_PIN(5, 8)
+#define WMT_PIN_I2C0SDA WMT_PIN(5, 9)
+#define WMT_PIN_UART0RTS WMT_PIN(5, 16)
+#define WMT_PIN_UART0TXD WMT_PIN(5, 17)
+#define WMT_PIN_UART0CTS WMT_PIN(5, 18)
+#define WMT_PIN_UART0RXD WMT_PIN(5, 19)
+#define WMT_PIN_UART1RTS WMT_PIN(5, 20)
+#define WMT_PIN_UART1TXD WMT_PIN(5, 21)
+#define WMT_PIN_UART1CTS WMT_PIN(5, 22)
+#define WMT_PIN_UART1RXD WMT_PIN(5, 23)
+#define WMT_PIN_UART2RTS WMT_PIN(5, 24)
+#define WMT_PIN_UART2TXD WMT_PIN(5, 25)
+#define WMT_PIN_UART2CTS WMT_PIN(5, 26)
+#define WMT_PIN_UART2RXD WMT_PIN(5, 27)
+#define WMT_PIN_UART3RTS WMT_PIN(5, 28)
+#define WMT_PIN_UART3TXD WMT_PIN(5, 29)
+#define WMT_PIN_UART3CTS WMT_PIN(5, 30)
+#define WMT_PIN_UART3RXD WMT_PIN(5, 31)
+#define WMT_PIN_KPADROW0 WMT_PIN(6, 16)
+#define WMT_PIN_KPADROW1 WMT_PIN(6, 17)
+#define WMT_PIN_KPADCOL0 WMT_PIN(6, 18)
+#define WMT_PIN_KPADCOL1 WMT_PIN(6, 19)
+#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
+#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
+#define WMT_PIN_SD1WP WMT_PIN(7, 13)
+
+static const struct pinctrl_pin_desc wm8650_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
+ PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
+ PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS0, "spi0_ss0"),
+ PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"),
+ PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"),
+ PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"),
+ PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_UART0RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART3RTS, "uart3_rts"),
+ PINCTRL_PIN(WMT_PIN_UART3TXD, "uart3_txd"),
+ PINCTRL_PIN(WMT_PIN_UART3CTS, "uart3_cts"),
+ PINCTRL_PIN(WMT_PIN_UART3RXD, "uart3_rxd"),
+ PINCTRL_PIN(WMT_PIN_KPADROW0, "kpadrow0"),
+ PINCTRL_PIN(WMT_PIN_KPADROW1, "kpadrow1"),
+ PINCTRL_PIN(WMT_PIN_KPADCOL0, "kpadcol0"),
+ PINCTRL_PIN(WMT_PIN_KPADCOL1, "kpadcol1"),
+ PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"),
+ PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8650_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "susgpio0",
+ "sd0_cd",
+ "sd1_cd",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "i2c1_scl",
+ "i2c1_sda",
+ "spi0_mosi",
+ "spi0_miso",
+ "spi0_ss0",
+ "spi0_clk",
+ "sd0_data0",
+ "sd0_data1",
+ "sd0_data2",
+ "sd0_data3",
+ "sd0_clk",
+ "sd0_wp",
+ "sd0_cmd",
+ "sd1_data0",
+ "sd1_data1",
+ "sd1_data2",
+ "sd1_data3",
+ "sd1_data4",
+ "sd1_data5",
+ "sd1_data6",
+ "sd1_data7",
+ "i2c0_scl",
+ "i2c0_sda",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "uart3_rts",
+ "uart3_txd",
+ "uart3_cts",
+ "uart3_rxd",
+ "kpadrow0",
+ "kpadrow1",
+ "kpadcol0",
+ "kpadcol1",
+ "sd1_clk",
+ "sd1_cmd",
+ "sd1_wp",
+};
+
+static int wm8650_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8650_banks;
+ data->nbanks = ARRAY_SIZE(wm8650_banks);
+ data->pins = wm8650_pins;
+ data->npins = ARRAY_SIZE(wm8650_pins);
+ data->groups = wm8650_groups;
+ data->ngroups = ARRAY_SIZE(wm8650_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8650_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8650-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8650_pinctrl_probe,
+ .remove = wm8650_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8650",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8650 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8750.c b/drivers/pinctrl/vt8500/pinctrl-wm8750.c
new file mode 100644
index 0000000..b964cc5
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8750.c
@@ -0,0 +1,409 @@
+/*
+ * Pinctrl data for Wondermedia WM8750 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8750_banks[] = {
+ WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
+ WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
+ WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
+ WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
+ WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
+ WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
+ WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
+ WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
+ WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */
+ WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */
+ WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 16)
+#define WMT_PIN_SD0CD WMT_PIN(0, 28)
+#define WMT_PIN_VDOUT0 WMT_PIN(1, 0)
+#define WMT_PIN_VDOUT1 WMT_PIN(1, 1)
+#define WMT_PIN_VDOUT2 WMT_PIN(1, 2)
+#define WMT_PIN_VDOUT3 WMT_PIN(1, 3)
+#define WMT_PIN_VDOUT4 WMT_PIN(1, 4)
+#define WMT_PIN_VDOUT5 WMT_PIN(1, 5)
+#define WMT_PIN_VDOUT6 WMT_PIN(1, 6)
+#define WMT_PIN_VDOUT7 WMT_PIN(1, 7)
+#define WMT_PIN_VDOUT8 WMT_PIN(1, 8)
+#define WMT_PIN_VDOUT9 WMT_PIN(1, 9)
+#define WMT_PIN_VDOUT10 WMT_PIN(1, 10)
+#define WMT_PIN_VDOUT11 WMT_PIN(1, 11)
+#define WMT_PIN_VDOUT12 WMT_PIN(1, 12)
+#define WMT_PIN_VDOUT13 WMT_PIN(1, 13)
+#define WMT_PIN_VDOUT14 WMT_PIN(1, 14)
+#define WMT_PIN_VDOUT15 WMT_PIN(1, 15)
+#define WMT_PIN_VDOUT16 WMT_PIN(1, 16)
+#define WMT_PIN_VDOUT17 WMT_PIN(1, 17)
+#define WMT_PIN_VDOUT18 WMT_PIN(1, 18)
+#define WMT_PIN_VDOUT19 WMT_PIN(1, 19)
+#define WMT_PIN_VDOUT20 WMT_PIN(1, 20)
+#define WMT_PIN_VDOUT21 WMT_PIN(1, 21)
+#define WMT_PIN_VDOUT22 WMT_PIN(1, 22)
+#define WMT_PIN_VDOUT23 WMT_PIN(1, 23)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_SPI0_MOSI WMT_PIN(2, 24)
+#define WMT_PIN_SPI0_MISO WMT_PIN(2, 25)
+#define WMT_PIN_SPI0_SS WMT_PIN(2, 26)
+#define WMT_PIN_SPI0_CLK WMT_PIN(2, 27)
+#define WMT_PIN_SPI0_SSB WMT_PIN(2, 28)
+#define WMT_PIN_SD0CLK WMT_PIN(3, 17)
+#define WMT_PIN_SD0CMD WMT_PIN(3, 18)
+#define WMT_PIN_SD0WP WMT_PIN(3, 19)
+#define WMT_PIN_SD0DATA0 WMT_PIN(3, 20)
+#define WMT_PIN_SD0DATA1 WMT_PIN(3, 21)
+#define WMT_PIN_SD0DATA2 WMT_PIN(3, 22)
+#define WMT_PIN_SD0DATA3 WMT_PIN(3, 23)
+#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24)
+#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25)
+#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26)
+#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27)
+#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28)
+#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29)
+#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30)
+#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31)
+#define WMT_PIN_I2C0_SCL WMT_PIN(5, 8)
+#define WMT_PIN_I2C0_SDA WMT_PIN(5, 9)
+#define WMT_PIN_I2C1_SCL WMT_PIN(5, 10)
+#define WMT_PIN_I2C1_SDA WMT_PIN(5, 11)
+#define WMT_PIN_I2C2_SCL WMT_PIN(5, 12)
+#define WMT_PIN_I2C2_SDA WMT_PIN(5, 13)
+#define WMT_PIN_UART0_RTS WMT_PIN(5, 16)
+#define WMT_PIN_UART0_TXD WMT_PIN(5, 17)
+#define WMT_PIN_UART0_CTS WMT_PIN(5, 18)
+#define WMT_PIN_UART0_RXD WMT_PIN(5, 19)
+#define WMT_PIN_UART1_RTS WMT_PIN(5, 20)
+#define WMT_PIN_UART1_TXD WMT_PIN(5, 21)
+#define WMT_PIN_UART1_CTS WMT_PIN(5, 22)
+#define WMT_PIN_UART1_RXD WMT_PIN(5, 23)
+#define WMT_PIN_UART2_RTS WMT_PIN(5, 24)
+#define WMT_PIN_UART2_TXD WMT_PIN(5, 25)
+#define WMT_PIN_UART2_CTS WMT_PIN(5, 26)
+#define WMT_PIN_UART2_RXD WMT_PIN(5, 27)
+#define WMT_PIN_UART3_RTS WMT_PIN(5, 28)
+#define WMT_PIN_UART3_TXD WMT_PIN(5, 29)
+#define WMT_PIN_UART3_CTS WMT_PIN(5, 30)
+#define WMT_PIN_UART3_RXD WMT_PIN(5, 31)
+#define WMT_PIN_SD2CD WMT_PIN(6, 0)
+#define WMT_PIN_SD2DATA3 WMT_PIN(6, 1)
+#define WMT_PIN_SD2DATA0 WMT_PIN(6, 2)
+#define WMT_PIN_SD2WP WMT_PIN(6, 3)
+#define WMT_PIN_SD2DATA1 WMT_PIN(6, 4)
+#define WMT_PIN_SD2DATA2 WMT_PIN(6, 5)
+#define WMT_PIN_SD2CMD WMT_PIN(6, 6)
+#define WMT_PIN_SD2CLK WMT_PIN(6, 7)
+#define WMT_PIN_SD2PWR WMT_PIN(6, 9)
+#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
+#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
+#define WMT_PIN_SD1PWR WMT_PIN(7, 10)
+#define WMT_PIN_SD1WP WMT_PIN(7, 11)
+#define WMT_PIN_SD1CD WMT_PIN(7, 12)
+#define WMT_PIN_SPI0SS3 WMT_PIN(7, 24)
+#define WMT_PIN_SPI0SS2 WMT_PIN(7, 25)
+#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26)
+#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27)
+
+static const struct pinctrl_pin_desc wm8750_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI0_CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SSB, "spi0_ssb"),
+ PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SCL, "i2c2_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SDA, "i2c2_sda"),
+ PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART3_RTS, "uart3_rts"),
+ PINCTRL_PIN(WMT_PIN_UART3_TXD, "uart3_txd"),
+ PINCTRL_PIN(WMT_PIN_UART3_CTS, "uart3_cts"),
+ PINCTRL_PIN(WMT_PIN_UART3_RXD, "uart3_rxd"),
+ PINCTRL_PIN(WMT_PIN_SD2CD, "sd2_cd"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA3, "sd2_data3"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA0, "sd2_data0"),
+ PINCTRL_PIN(WMT_PIN_SD2WP, "sd2_wp"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA1, "sd2_data1"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA2, "sd2_data2"),
+ PINCTRL_PIN(WMT_PIN_SD2CMD, "sd2_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD2CLK, "sd2_clk"),
+ PINCTRL_PIN(WMT_PIN_SD2PWR, "sd2_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"),
+ PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1PWR, "sd1_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"),
+ PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS3, "spi0_ss3"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS2, "spi0_ss2"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT1, "pwmout1"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT0, "pwmout0"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8750_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "sd0_cd",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "spi0_mosi",
+ "spi0_miso",
+ "spi0_ss",
+ "spi0_clk",
+ "spi0_ssb",
+ "sd0_clk",
+ "sd0_cmd",
+ "sd0_wp",
+ "sd0_data0",
+ "sd0_data1",
+ "sd0_data2",
+ "sd0_data3",
+ "sd1_data0",
+ "sd1_data1",
+ "sd1_data2",
+ "sd1_data3",
+ "sd1_data4",
+ "sd1_data5",
+ "sd1_data6",
+ "sd1_data7",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "i2c2_scl",
+ "i2c2_sda",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "uart3_rts",
+ "uart3_txd",
+ "uart3_cts",
+ "uart3_rxd",
+ "sd2_cd",
+ "sd2_data3",
+ "sd2_data0",
+ "sd2_wp",
+ "sd2_data1",
+ "sd2_data2",
+ "sd2_cmd",
+ "sd2_clk",
+ "sd2_pwr",
+ "sd1_clk",
+ "sd1_cmd",
+ "sd1_pwr",
+ "sd1_wp",
+ "sd1_cd",
+ "spi0_ss3",
+ "spi0_ss2",
+ "pwmout1",
+ "pwmout0",
+};
+
+static int wm8750_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8750_banks;
+ data->nbanks = ARRAY_SIZE(wm8750_banks);
+ data->pins = wm8750_pins;
+ data->npins = ARRAY_SIZE(wm8750_pins);
+ data->groups = wm8750_groups;
+ data->ngroups = ARRAY_SIZE(wm8750_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8750_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8750-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8750_pinctrl_probe,
+ .remove = wm8750_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8750",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8750 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8850.c b/drivers/pinctrl/vt8500/pinctrl-wm8850.c
new file mode 100644
index 0000000..ecadce9c
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8850.c
@@ -0,0 +1,388 @@
+/*
+ * Pinctrl data for Wondermedia WM8850 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8850_banks[] = {
+ WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
+ WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
+ WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
+ WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
+ WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
+ WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
+ WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
+ WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
+ WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */
+ WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */
+ WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17)
+#define WMT_PIN_WAKEUP2 WMT_PIN(0, 18)
+#define WMT_PIN_WAKEUP3 WMT_PIN(0, 19)
+#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21)
+#define WMT_PIN_SUSGPIO1 WMT_PIN(0, 22)
+#define WMT_PIN_SD0CD WMT_PIN(0, 28)
+#define WMT_PIN_VDOUT0 WMT_PIN(1, 0)
+#define WMT_PIN_VDOUT1 WMT_PIN(1, 1)
+#define WMT_PIN_VDOUT2 WMT_PIN(1, 2)
+#define WMT_PIN_VDOUT3 WMT_PIN(1, 3)
+#define WMT_PIN_VDOUT4 WMT_PIN(1, 4)
+#define WMT_PIN_VDOUT5 WMT_PIN(1, 5)
+#define WMT_PIN_VDOUT6 WMT_PIN(1, 6)
+#define WMT_PIN_VDOUT7 WMT_PIN(1, 7)
+#define WMT_PIN_VDOUT8 WMT_PIN(1, 8)
+#define WMT_PIN_VDOUT9 WMT_PIN(1, 9)
+#define WMT_PIN_VDOUT10 WMT_PIN(1, 10)
+#define WMT_PIN_VDOUT11 WMT_PIN(1, 11)
+#define WMT_PIN_VDOUT12 WMT_PIN(1, 12)
+#define WMT_PIN_VDOUT13 WMT_PIN(1, 13)
+#define WMT_PIN_VDOUT14 WMT_PIN(1, 14)
+#define WMT_PIN_VDOUT15 WMT_PIN(1, 15)
+#define WMT_PIN_VDOUT16 WMT_PIN(1, 16)
+#define WMT_PIN_VDOUT17 WMT_PIN(1, 17)
+#define WMT_PIN_VDOUT18 WMT_PIN(1, 18)
+#define WMT_PIN_VDOUT19 WMT_PIN(1, 19)
+#define WMT_PIN_VDOUT20 WMT_PIN(1, 20)
+#define WMT_PIN_VDOUT21 WMT_PIN(1, 21)
+#define WMT_PIN_VDOUT22 WMT_PIN(1, 22)
+#define WMT_PIN_VDOUT23 WMT_PIN(1, 23)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_SPI0_MOSI WMT_PIN(2, 24)
+#define WMT_PIN_SPI0_MISO WMT_PIN(2, 25)
+#define WMT_PIN_SPI0_SS WMT_PIN(2, 26)
+#define WMT_PIN_SPI0_CLK WMT_PIN(2, 27)
+#define WMT_PIN_SPI0_SSB WMT_PIN(2, 28)
+#define WMT_PIN_SD0CLK WMT_PIN(3, 17)
+#define WMT_PIN_SD0CMD WMT_PIN(3, 18)
+#define WMT_PIN_SD0WP WMT_PIN(3, 19)
+#define WMT_PIN_SD0DATA0 WMT_PIN(3, 20)
+#define WMT_PIN_SD0DATA1 WMT_PIN(3, 21)
+#define WMT_PIN_SD0DATA2 WMT_PIN(3, 22)
+#define WMT_PIN_SD0DATA3 WMT_PIN(3, 23)
+#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24)
+#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25)
+#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26)
+#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27)
+#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28)
+#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29)
+#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30)
+#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31)
+#define WMT_PIN_I2C0_SCL WMT_PIN(5, 8)
+#define WMT_PIN_I2C0_SDA WMT_PIN(5, 9)
+#define WMT_PIN_I2C1_SCL WMT_PIN(5, 10)
+#define WMT_PIN_I2C1_SDA WMT_PIN(5, 11)
+#define WMT_PIN_I2C2_SCL WMT_PIN(5, 12)
+#define WMT_PIN_I2C2_SDA WMT_PIN(5, 13)
+#define WMT_PIN_UART0_RTS WMT_PIN(5, 16)
+#define WMT_PIN_UART0_TXD WMT_PIN(5, 17)
+#define WMT_PIN_UART0_CTS WMT_PIN(5, 18)
+#define WMT_PIN_UART0_RXD WMT_PIN(5, 19)
+#define WMT_PIN_UART1_RTS WMT_PIN(5, 20)
+#define WMT_PIN_UART1_TXD WMT_PIN(5, 21)
+#define WMT_PIN_UART1_CTS WMT_PIN(5, 22)
+#define WMT_PIN_UART1_RXD WMT_PIN(5, 23)
+#define WMT_PIN_UART2_RTS WMT_PIN(5, 24)
+#define WMT_PIN_UART2_TXD WMT_PIN(5, 25)
+#define WMT_PIN_UART2_CTS WMT_PIN(5, 26)
+#define WMT_PIN_UART2_RXD WMT_PIN(5, 27)
+#define WMT_PIN_SD2WP WMT_PIN(6, 3)
+#define WMT_PIN_SD2CMD WMT_PIN(6, 6)
+#define WMT_PIN_SD2CLK WMT_PIN(6, 7)
+#define WMT_PIN_SD2PWR WMT_PIN(6, 9)
+#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
+#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
+#define WMT_PIN_SD1PWR WMT_PIN(7, 10)
+#define WMT_PIN_SD1WP WMT_PIN(7, 11)
+#define WMT_PIN_SD1CD WMT_PIN(7, 12)
+#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26)
+#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27)
+
+static const struct pinctrl_pin_desc wm8850_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO1, "susgpio1"),
+ PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI0_CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SSB, "spi0_ssb"),
+ PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SCL, "i2c2_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SDA, "i2c2_sda"),
+ PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_SD2WP, "sd2_wp"),
+ PINCTRL_PIN(WMT_PIN_SD2CMD, "sd2_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD2CLK, "sd2_clk"),
+ PINCTRL_PIN(WMT_PIN_SD2PWR, "sd2_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"),
+ PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1PWR, "sd1_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"),
+ PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT1, "pwmout1"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT0, "pwmout0"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8850_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "wakeup2",
+ "wakeup3",
+ "susgpio0",
+ "susgpio1",
+ "sd0_cd",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "spi0_mosi",
+ "spi0_miso",
+ "spi0_ss",
+ "spi0_clk",
+ "spi0_ssb",
+ "sd0_clk",
+ "sd0_cmd",
+ "sd0_wp",
+ "sd0_data0",
+ "sd0_data1",
+ "sd0_data2",
+ "sd0_data3",
+ "sd1_data0",
+ "sd1_data1",
+ "sd1_data2",
+ "sd1_data3",
+ "sd1_data4",
+ "sd1_data5",
+ "sd1_data6",
+ "sd1_data7",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "i2c2_scl",
+ "i2c2_sda",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "sd2_wp",
+ "sd2_cmd",
+ "sd2_clk",
+ "sd2_pwr",
+ "sd1_clk",
+ "sd1_cmd",
+ "sd1_pwr",
+ "sd1_wp",
+ "sd1_cd",
+ "pwmout1",
+ "pwmout0",
+};
+
+static int wm8850_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8850_banks;
+ data->nbanks = ARRAY_SIZE(wm8850_banks);
+ data->pins = wm8850_pins;
+ data->npins = ARRAY_SIZE(wm8850_pins);
+ data->groups = wm8850_groups;
+ data->ngroups = ARRAY_SIZE(wm8850_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8850_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8850-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8850_pinctrl_probe,
+ .remove = wm8850_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8850",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8850 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c
new file mode 100644
index 0000000..9736d27
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
@@ -0,0 +1,620 @@
+/*
+ * Pinctrl driver for the Wondermedia SoC's
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+static inline void wmt_setbits(struct wmt_pinctrl_data *data, u32 reg,
+ u32 mask)
+{
+ u32 val;
+
+ val = readl_relaxed(data->base + reg);
+ val |= mask;
+ writel_relaxed(val, data->base + reg);
+}
+
+static inline void wmt_clearbits(struct wmt_pinctrl_data *data, u32 reg,
+ u32 mask)
+{
+ u32 val;
+
+ val = readl_relaxed(data->base + reg);
+ val &= ~mask;
+ writel_relaxed(val, data->base + reg);
+}
+
+enum wmt_func_sel {
+ WMT_FSEL_GPIO_IN = 0,
+ WMT_FSEL_GPIO_OUT = 1,
+ WMT_FSEL_ALT = 2,
+ WMT_FSEL_COUNT = 3,
+};
+
+static const char * const wmt_functions[WMT_FSEL_COUNT] = {
+ [WMT_FSEL_GPIO_IN] = "gpio_in",
+ [WMT_FSEL_GPIO_OUT] = "gpio_out",
+ [WMT_FSEL_ALT] = "alt",
+};
+
+static int wmt_pmx_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ return WMT_FSEL_COUNT;
+}
+
+static const char *wmt_pmx_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return wmt_functions[selector];
+}
+
+static int wmt_pmx_get_function_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ /* every pin does every function */
+ *groups = data->groups;
+ *num_groups = data->ngroups;
+
+ return 0;
+}
+
+static int wmt_set_pinmux(struct wmt_pinctrl_data *data, unsigned func,
+ unsigned pin)
+{
+ u32 bank = WMT_BANK_FROM_PIN(pin);
+ u32 bit = WMT_BIT_FROM_PIN(pin);
+ u32 reg_en = data->banks[bank].reg_en;
+ u32 reg_dir = data->banks[bank].reg_dir;
+
+ if (reg_dir == NO_REG) {
+ dev_err(data->dev, "pin:%d no direction register defined\n",
+ pin);
+ return -EINVAL;
+ }
+
+ /*
+ * If reg_en == NO_REG, we assume it is a dedicated GPIO and cannot be
+ * disabled (as on VT8500) and that no alternate function is available.
+ */
+ switch (func) {
+ case WMT_FSEL_GPIO_IN:
+ if (reg_en != NO_REG)
+ wmt_setbits(data, reg_en, BIT(bit));
+ wmt_clearbits(data, reg_dir, BIT(bit));
+ break;
+ case WMT_FSEL_GPIO_OUT:
+ if (reg_en != NO_REG)
+ wmt_setbits(data, reg_en, BIT(bit));
+ wmt_setbits(data, reg_dir, BIT(bit));
+ break;
+ case WMT_FSEL_ALT:
+ if (reg_en == NO_REG) {
+ dev_err(data->dev, "pin:%d no alt function available\n",
+ pin);
+ return -EINVAL;
+ }
+ wmt_clearbits(data, reg_en, BIT(bit));
+ }
+
+ return 0;
+}
+
+static int wmt_pmx_enable(struct pinctrl_dev *pctldev,
+ unsigned func_selector,
+ unsigned group_selector)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+ u32 pinnum = data->pins[group_selector].number;
+
+ return wmt_set_pinmux(data, func_selector, pinnum);
+}
+
+static void wmt_pmx_disable(struct pinctrl_dev *pctldev,
+ unsigned func_selector,
+ unsigned group_selector)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+ u32 pinnum = data->pins[group_selector].number;
+
+ /* disable by setting GPIO_IN */
+ wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, pinnum);
+}
+
+static void wmt_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable by setting GPIO_IN */
+ wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, offset);
+}
+
+static int wmt_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset,
+ bool input)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ wmt_set_pinmux(data, (input ? WMT_FSEL_GPIO_IN : WMT_FSEL_GPIO_OUT),
+ offset);
+
+ return 0;
+}
+
+static struct pinmux_ops wmt_pinmux_ops = {
+ .get_functions_count = wmt_pmx_get_functions_count,
+ .get_function_name = wmt_pmx_get_function_name,
+ .get_function_groups = wmt_pmx_get_function_groups,
+ .enable = wmt_pmx_enable,
+ .disable = wmt_pmx_disable,
+ .gpio_disable_free = wmt_pmx_gpio_disable_free,
+ .gpio_set_direction = wmt_pmx_gpio_set_direction,
+};
+
+static int wmt_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ return data->ngroups;
+}
+
+static const char *wmt_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ return data->groups[selector];
+}
+
+static int wmt_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = &data->pins[selector].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static int wmt_pctl_find_group_by_pin(struct wmt_pinctrl_data *data, u32 pin)
+{
+ int i;
+
+ for (i = 0; i < data->npins; i++) {
+ if (data->pins[i].number == pin)
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int wmt_pctl_dt_node_to_map_func(struct wmt_pinctrl_data *data,
+ struct device_node *np,
+ u32 pin, u32 fnum,
+ struct pinctrl_map **maps)
+{
+ int group;
+ struct pinctrl_map *map = *maps;
+
+ if (fnum >= ARRAY_SIZE(wmt_functions)) {
+ dev_err(data->dev, "invalid wm,function %d\n", fnum);
+ return -EINVAL;
+ }
+
+ group = wmt_pctl_find_group_by_pin(data, pin);
+ if (group < 0) {
+ dev_err(data->dev, "unable to match pin %d to group\n", pin);
+ return group;
+ }
+
+ map->type = PIN_MAP_TYPE_MUX_GROUP;
+ map->data.mux.group = data->groups[group];
+ map->data.mux.function = wmt_functions[fnum];
+ (*maps)++;
+
+ return 0;
+}
+
+static int wmt_pctl_dt_node_to_map_pull(struct wmt_pinctrl_data *data,
+ struct device_node *np,
+ u32 pin, u32 pull,
+ struct pinctrl_map **maps)
+{
+ int group;
+ unsigned long *configs;
+ struct pinctrl_map *map = *maps;
+
+ if (pull > 2) {
+ dev_err(data->dev, "invalid wm,pull %d\n", pull);
+ return -EINVAL;
+ }
+
+ group = wmt_pctl_find_group_by_pin(data, pin);
+ if (group < 0) {
+ dev_err(data->dev, "unable to match pin %d to group\n", pin);
+ return group;
+ }
+
+ configs = devm_kzalloc(data->dev, sizeof(*configs), GFP_KERNEL);
+ if (!configs)
+ return -ENOMEM;
+
+ configs[0] = pull;
+
+ map->type = PIN_MAP_TYPE_CONFIGS_PIN;
+ map->data.configs.group_or_pin = data->groups[group];
+ map->data.configs.configs = configs;
+ map->data.configs.num_configs = 1;
+ (*maps)++;
+
+ return 0;
+}
+
+static int wmt_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map,
+ unsigned *num_maps)
+{
+ struct pinctrl_map *maps, *cur_map;
+ struct property *pins, *funcs, *pulls;
+ u32 pin, func, pull;
+ int num_pins, num_funcs, num_pulls, maps_per_pin;
+ int i, err;
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ pins = of_find_property(np, "wm,pins", NULL);
+ if (!pins) {
+ dev_err(data->dev, "missing wmt,pins property\n");
+ return -EINVAL;
+ }
+
+ funcs = of_find_property(np, "wm,function", NULL);
+ pulls = of_find_property(np, "wm,pull", NULL);
+
+ if (!funcs && !pulls) {
+ dev_err(data->dev, "neither wm,function nor wm,pull specified\n");
+ return -EINVAL;
+ }
+
+ /*
+ * The following lines calculate how many values are defined for each
+ * of the properties.
+ */
+ num_pins = pins->length / sizeof(u32);
+ num_funcs = funcs ? (funcs->length / sizeof(u32)) : 0;
+ num_pulls = pulls ? (pulls->length / sizeof(u32)) : 0;
+
+ if (num_funcs > 1 && num_funcs != num_pins) {
+ dev_err(data->dev, "wm,function must have 1 or %d entries\n",
+ num_pins);
+ return -EINVAL;
+ }
+
+ if (num_pulls > 1 && num_pulls != num_pins) {
+ dev_err(data->dev, "wm,pull must have 1 or %d entries\n",
+ num_pins);
+ return -EINVAL;
+ }
+
+ maps_per_pin = 0;
+ if (num_funcs)
+ maps_per_pin++;
+ if (num_pulls)
+ maps_per_pin++;
+
+ cur_map = maps = devm_kzalloc(data->dev,
+ num_pins * maps_per_pin * sizeof(*maps),
+ GFP_KERNEL);
+ if (!maps)
+ return -ENOMEM;
+
+ for (i = 0; i < num_pins; i++) {
+ err = of_property_read_u32_index(np, "wm,pins", i, &pin);
+ if (err)
+ return err;
+
+ if (pin >= (data->nbanks * 32)) {
+ dev_err(data->dev, "invalid wm,pins value\n");
+ return -EINVAL;
+ }
+
+ if (num_funcs) {
+ err = of_property_read_u32_index(np, "wm,function",
+ (num_funcs > 1 ? i : 0), &func);
+ if (err)
+ return err;
+
+ err = wmt_pctl_dt_node_to_map_func(data, np, pin, func,
+ &cur_map);
+ if (err)
+ return err;
+ }
+
+ if (num_pulls) {
+ err = of_property_read_u32_index(np, "wm,pull",
+ (num_pulls > 1 ? i : 0), &pull);
+ if (err)
+ return err;
+
+ err = wmt_pctl_dt_node_to_map_pull(data, np, pin, pull,
+ &cur_map);
+ if (err)
+ return err;
+ }
+ }
+ *map = maps;
+ *num_maps = num_pins * maps_per_pin;
+ return 0;
+}
+
+static void wmt_pctl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *maps,
+ unsigned num_maps)
+{
+ int i;
+
+ for (i = 0; i < num_maps; i++)
+ if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+ kfree(maps[i].data.configs.configs);
+
+ kfree(maps);
+}
+
+static struct pinctrl_ops wmt_pctl_ops = {
+ .get_groups_count = wmt_get_groups_count,
+ .get_group_name = wmt_get_group_name,
+ .get_group_pins = wmt_get_group_pins,
+ .dt_node_to_map = wmt_pctl_dt_node_to_map,
+ .dt_free_map = wmt_pctl_dt_free_map,
+};
+
+static int wmt_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long *config)
+{
+ return -ENOTSUPP;
+}
+
+static int wmt_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long config)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+ enum pin_config_param param = pinconf_to_config_param(config);
+ u16 arg = pinconf_to_config_argument(config);
+ u32 bank = WMT_BANK_FROM_PIN(pin);
+ u32 bit = WMT_BIT_FROM_PIN(pin);
+ u32 reg_pull_en = data->banks[bank].reg_pull_en;
+ u32 reg_pull_cfg = data->banks[bank].reg_pull_cfg;
+
+ if ((reg_pull_en == NO_REG) || (reg_pull_cfg == NO_REG)) {
+ dev_err(data->dev, "bias functions not supported on pin %d\n",
+ pin);
+ return -EINVAL;
+ }
+
+ if ((param == PIN_CONFIG_BIAS_PULL_DOWN) ||
+ (param == PIN_CONFIG_BIAS_PULL_UP)) {
+ if (arg == 0)
+ param = PIN_CONFIG_BIAS_DISABLE;
+ }
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ wmt_clearbits(data, reg_pull_en, BIT(bit));
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ wmt_clearbits(data, reg_pull_cfg, BIT(bit));
+ wmt_setbits(data, reg_pull_en, BIT(bit));
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ wmt_setbits(data, reg_pull_cfg, BIT(bit));
+ wmt_setbits(data, reg_pull_en, BIT(bit));
+ break;
+ default:
+ dev_err(data->dev, "unknown pinconf param\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct pinconf_ops wmt_pinconf_ops = {
+ .pin_config_get = wmt_pinconf_get,
+ .pin_config_set = wmt_pinconf_set,
+};
+
+static struct pinctrl_desc wmt_desc = {
+ .owner = THIS_MODULE,
+ .name = "pinctrl-wmt",
+ .pctlops = &wmt_pctl_ops,
+ .pmxops = &wmt_pinmux_ops,
+ .confops = &wmt_pinconf_ops,
+};
+
+static int wmt_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_request_gpio(chip->base + offset);
+}
+
+static void wmt_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(chip->base + offset);
+}
+
+static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+ struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
+ u32 bank = WMT_BANK_FROM_PIN(offset);
+ u32 bit = WMT_BIT_FROM_PIN(offset);
+ u32 reg_dir = data->banks[bank].reg_dir;
+ u32 val;
+
+ val = readl_relaxed(data->base + reg_dir);
+ if (val & BIT(bit))
+ return GPIOF_DIR_OUT;
+ else
+ return GPIOF_DIR_IN;
+}
+
+static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int wmt_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
+static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
+ u32 bank = WMT_BANK_FROM_PIN(offset);
+ u32 bit = WMT_BIT_FROM_PIN(offset);
+ u32 reg_data_in = data->banks[bank].reg_data_in;
+
+ if (reg_data_in == NO_REG) {
+ dev_err(data->dev, "no data in register defined\n");
+ return -EINVAL;
+ }
+
+ return !!(readl_relaxed(data->base + reg_data_in) & BIT(bit));
+}
+
+static void wmt_gpio_set_value(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
+ u32 bank = WMT_BANK_FROM_PIN(offset);
+ u32 bit = WMT_BIT_FROM_PIN(offset);
+ u32 reg_data_out = data->banks[bank].reg_data_out;
+
+ if (reg_data_out == NO_REG) {
+ dev_err(data->dev, "no data out register defined\n");
+ return;
+ }
+
+ if (val)
+ wmt_setbits(data, reg_data_out, BIT(bit));
+ else
+ wmt_clearbits(data, reg_data_out, BIT(bit));
+}
+
+static struct gpio_chip wmt_gpio_chip = {
+ .label = "gpio-wmt",
+ .owner = THIS_MODULE,
+ .request = wmt_gpio_request,
+ .free = wmt_gpio_free,
+ .get_direction = wmt_gpio_get_direction,
+ .direction_input = wmt_gpio_direction_input,
+ .direction_output = wmt_gpio_direction_output,
+ .get = wmt_gpio_get_value,
+ .set = wmt_gpio_set_value,
+ .can_sleep = 0,
+};
+
+int wmt_pinctrl_probe(struct platform_device *pdev,
+ struct wmt_pinctrl_data *data)
+{
+ int err;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!data->base) {
+ dev_err(&pdev->dev, "failed to map memory resource\n");
+ return -EBUSY;
+ }
+
+ wmt_desc.pins = data->pins;
+ wmt_desc.npins = data->npins;
+
+ data->gpio_chip = wmt_gpio_chip;
+ data->gpio_chip.dev = &pdev->dev;
+ data->gpio_chip.of_node = pdev->dev.of_node;
+ data->gpio_chip.ngpio = data->nbanks * 32;
+
+ platform_set_drvdata(pdev, data);
+
+ data->dev = &pdev->dev;
+
+ data->pctl_dev = pinctrl_register(&wmt_desc, &pdev->dev, data);
+ if (IS_ERR(data->pctl_dev)) {
+ dev_err(&pdev->dev, "Failed to register pinctrl\n");
+ return -EINVAL;
+ }
+
+ err = gpiochip_add(&data->gpio_chip);
+ if (err) {
+ dev_err(&pdev->dev, "could not add GPIO chip\n");
+ goto fail_gpio;
+ }
+
+ err = gpiochip_add_pin_range(&data->gpio_chip, dev_name(data->dev),
+ 0, 0, data->nbanks * 32);
+ if (err)
+ goto fail_range;
+
+ dev_info(&pdev->dev, "Pin controller initialized\n");
+
+ return 0;
+
+fail_range:
+ err = gpiochip_remove(&data->gpio_chip);
+ if (err)
+ dev_err(&pdev->dev, "failed to remove gpio chip\n");
+fail_gpio:
+ pinctrl_unregister(data->pctl_dev);
+ return err;
+}
+
+int wmt_pinctrl_remove(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data = platform_get_drvdata(pdev);
+ int err;
+
+ err = gpiochip_remove(&data->gpio_chip);
+ if (err)
+ dev_err(&pdev->dev, "failed to remove gpio chip\n");
+
+ pinctrl_unregister(data->pctl_dev);
+
+ return 0;
+}
diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.h b/drivers/pinctrl/vt8500/pinctrl-wmt.h
new file mode 100644
index 0000000..41f5f2d
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.h
@@ -0,0 +1,79 @@
+/*
+ * Pinctrl driver for the Wondermedia SoC's
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/gpio.h>
+
+/* VT8500 has no enable register in the extgpio bank. */
+#define NO_REG 0xFFFF
+
+#define WMT_PINCTRL_BANK(__en, __dir, __dout, __din, __pen, __pcfg) \
+{ \
+ .reg_en = __en, \
+ .reg_dir = __dir, \
+ .reg_data_out = __dout, \
+ .reg_data_in = __din, \
+ .reg_pull_en = __pen, \
+ .reg_pull_cfg = __pcfg, \
+}
+
+/* Encode/decode the bank/bit pairs into a pin value */
+#define WMT_PIN(__bank, __offset) ((__bank << 5) | __offset)
+#define WMT_BANK_FROM_PIN(__pin) (__pin >> 5)
+#define WMT_BIT_FROM_PIN(__pin) (__pin & 0x1f)
+
+#define WMT_GROUP(__name, __data) \
+{ \
+ .name = __name, \
+ .pins = __data, \
+ .npins = ARRAY_SIZE(__data), \
+}
+
+struct wmt_pinctrl_bank_registers {
+ u32 reg_en;
+ u32 reg_dir;
+ u32 reg_data_out;
+ u32 reg_data_in;
+
+ u32 reg_pull_en;
+ u32 reg_pull_cfg;
+};
+
+struct wmt_pinctrl_group {
+ const char *name;
+ const unsigned int *pins;
+ const unsigned npins;
+};
+
+struct wmt_pinctrl_data {
+ struct device *dev;
+ struct pinctrl_dev *pctl_dev;
+
+ /* must be initialized before calling wmt_pinctrl_probe */
+ void __iomem *base;
+ const struct wmt_pinctrl_bank_registers *banks;
+ const struct pinctrl_pin_desc *pins;
+ const char * const *groups;
+
+ u32 nbanks;
+ u32 npins;
+ u32 ngroups;
+
+ struct gpio_chip gpio_chip;
+ struct pinctrl_gpio_range gpio_range;
+};
+
+int wmt_pinctrl_probe(struct platform_device *pdev,
+ struct wmt_pinctrl_data *data);
+int wmt_pinctrl_remove(struct platform_device *pdev);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 3/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500
@ 2013-04-02 4:40 ` Tony Prisk
0 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:40 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for the GPIO/pinmux controller found on the VIA
VT8500 and Wondermedia WM8xxx-series SoCs.
Each pin within the controller is capable of operating as a GPIO or as
an alternate function. The pins are numbered according to their control
bank/bit so that if new pins are added, the existing numbering is maintained.
All currently supported SoCs are included: VT8500, WM8505, WM8650, WM8750 and
WM8850.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
---
.../devicetree/bindings/pinctrl/pinctrl-vt8500.txt | 57 ++
arch/arm/mach-vt8500/Kconfig | 1 +
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/vt8500/Kconfig | 52 ++
drivers/pinctrl/vt8500/Makefile | 8 +
drivers/pinctrl/vt8500/pinctrl-vt8500.c | 501 ++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8505.c | 532 +++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8650.c | 370 ++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8750.c | 409 +++++++++++++
drivers/pinctrl/vt8500/pinctrl-wm8850.c | 388 ++++++++++++
drivers/pinctrl/vt8500/pinctrl-wmt.c | 620 ++++++++++++++++++++
drivers/pinctrl/vt8500/pinctrl-wmt.h | 79 +++
13 files changed, 3019 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
create mode 100644 drivers/pinctrl/vt8500/Kconfig
create mode 100644 drivers/pinctrl/vt8500/Makefile
create mode 100644 drivers/pinctrl/vt8500/pinctrl-vt8500.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8505.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8650.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8750.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wm8850.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wmt.c
create mode 100644 drivers/pinctrl/vt8500/pinctrl-wmt.h
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
new file mode 100644
index 0000000..b3aa90f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
@@ -0,0 +1,57 @@
+VIA VT8500 and Wondermedia WM8xxx-series pinmux/gpio controller
+
+These SoCs contain a combined Pinmux/GPIO module. Each pin may operate as
+either a GPIO in, GPIO out or as an alternate function (I2C, SPI etc).
+
+Required properties:
+- compatible: "via,vt8500-pinctrl", "wm,wm8505-pinctrl", "wm,wm8650-pinctrl",
+ "wm8750-pinctrl" or "wm,wm8850-pinctrl"
+- reg: Should contain the physical address of the module's registers.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters.
+ bit 0 - active low
+
+Please refer to ../gpio/gpio.txt for a general description of GPIO bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Each pin configuration node lists the pin(s) to which it applies, and one or
+more of the mux functions to select on those pin(s), and pull-up/down
+configuration. Each subnode only affects those parameters that are explicitly
+listed. In other words, a subnode that lists only a mux function implies no
+information about any pull configuration. Similarly, a subnode that lists only
+a pull parameter implies no information about the mux function.
+
+Required subnode-properties:
+- wm,pins: An array of cells. Each cell contains the ID of a pin.
+
+Optional subnode-properties:
+- wm,function: Integer, containing the function to mux to the pin(s):
+ 0: GPIO in
+ 1: GPIO out
+ 2: alternate
+
+- wm,pull: Integer, representing the pull-down/up to apply to the pin(s):
+ 0: none
+ 1: down
+ 2: up
+
+Each of wm,function and wm,pull may contain either a single value which
+will be applied to all pins in wm,pins, or one value for each entry in
+wm,pins.
+
+Example:
+
+ pinctrl: pinctrl {
+ compatible = "wm,wm8505-pinctrl";
+ reg = <0xD8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index e3e94b2..9b25293 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -7,6 +7,7 @@ config ARCH_VT8500
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select VT8500_TIMER
+ select PINCTRL
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 34f51d2..35e9400 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -229,6 +229,7 @@ config PINCTRL_EXYNOS5440
source "drivers/pinctrl/mvebu/Kconfig"
source "drivers/pinctrl/sh-pfc/Kconfig"
source "drivers/pinctrl/spear/Kconfig"
+source "drivers/pinctrl/vt8500/Kconfig"
config PINCTRL_XWAY
bool
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f82cc5b..a5a52c8 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -52,3 +52,4 @@ obj-$(CONFIG_PLAT_ORION) += mvebu/
obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/
obj-$(CONFIG_SUPERH) += sh-pfc/
obj-$(CONFIG_PLAT_SPEAR) += spear/
+obj-$(CONFIG_ARCH_VT8500) += vt8500/
diff --git a/drivers/pinctrl/vt8500/Kconfig b/drivers/pinctrl/vt8500/Kconfig
new file mode 100644
index 0000000..55724a7
--- /dev/null
+++ b/drivers/pinctrl/vt8500/Kconfig
@@ -0,0 +1,52 @@
+#
+# VIA/Wondermedia PINCTRL drivers
+#
+
+if ARCH_VT8500
+
+config PINCTRL_WMT
+ bool
+ select PINMUX
+ select GENERIC_PINCONF
+
+config PINCTRL_VT8500
+ bool "VIA VT8500 pin controller driver"
+ depends on ARCH_WM8505
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ VIA VT8500 SoCs.
+
+config PINCTRL_WM8505
+ bool "Wondermedia WM8505 pin controller driver"
+ depends on ARCH_WM8505
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8505 SoCs.
+
+config PINCTRL_WM8650
+ bool "Wondermedia WM8650 pin controller driver"
+ depends on ARCH_WM8505
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8650 SoCs.
+
+config PINCTRL_WM8750
+ bool "Wondermedia WM8750 pin controller driver"
+ depends on ARCH_WM8750
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8750 SoCs.
+
+config PINCTRL_WM8850
+ bool "Wondermedia WM8850 pin controller driver"
+ depends on ARCH_WM8850
+ select PINCTRL_WMT
+ help
+ Say yes here to support the gpio/pin control module on
+ Wondermedia WM8850 SoCs.
+
+endif
diff --git a/drivers/pinctrl/vt8500/Makefile b/drivers/pinctrl/vt8500/Makefile
new file mode 100644
index 0000000..24ec45d
--- /dev/null
+++ b/drivers/pinctrl/vt8500/Makefile
@@ -0,0 +1,8 @@
+# VIA/Wondermedia pinctrl support
+
+obj-$(CONFIG_PINCTRL_WMT) += pinctrl-wmt.o
+obj-$(CONFIG_PINCTRL_VT8500) += pinctrl-vt8500.o
+obj-$(CONFIG_PINCTRL_WM8505) += pinctrl-wm8505.o
+obj-$(CONFIG_PINCTRL_WM8650) += pinctrl-wm8650.o
+obj-$(CONFIG_PINCTRL_WM8750) += pinctrl-wm8750.o
+obj-$(CONFIG_PINCTRL_WM8850) += pinctrl-wm8850.o
diff --git a/drivers/pinctrl/vt8500/pinctrl-vt8500.c b/drivers/pinctrl/vt8500/pinctrl-vt8500.c
new file mode 100644
index 0000000..f2fe9f8
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-vt8500.c
@@ -0,0 +1,501 @@
+/*
+ * Pinctrl data for VIA VT8500 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers vt8500_banks[] = {
+ WMT_PINCTRL_BANK(NO_REG, 0x3C, 0x5C, 0x7C, NO_REG, NO_REG), /* 0 */
+ WMT_PINCTRL_BANK(0x00, 0x20, 0x40, 0x60, NO_REG, NO_REG), /* 1 */
+ WMT_PINCTRL_BANK(0x04, 0x24, 0x44, 0x64, NO_REG, NO_REG), /* 2 */
+ WMT_PINCTRL_BANK(0x08, 0x28, 0x48, 0x68, NO_REG, NO_REG), /* 3 */
+ WMT_PINCTRL_BANK(0x0C, 0x2C, 0x4C, 0x6C, NO_REG, NO_REG), /* 4 */
+ WMT_PINCTRL_BANK(0x10, 0x30, 0x50, 0x70, NO_REG, NO_REG), /* 5 */
+ WMT_PINCTRL_BANK(0x14, 0x34, 0x54, 0x74, NO_REG, NO_REG), /* 6 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_EXTGPIO8 WMT_PIN(0, 8)
+#define WMT_PIN_UART0RTS WMT_PIN(1, 0)
+#define WMT_PIN_UART0TXD WMT_PIN(1, 1)
+#define WMT_PIN_UART0CTS WMT_PIN(1, 2)
+#define WMT_PIN_UART0RXD WMT_PIN(1, 3)
+#define WMT_PIN_UART1RTS WMT_PIN(1, 4)
+#define WMT_PIN_UART1TXD WMT_PIN(1, 5)
+#define WMT_PIN_UART1CTS WMT_PIN(1, 6)
+#define WMT_PIN_UART1RXD WMT_PIN(1, 7)
+#define WMT_PIN_SPI0CLK WMT_PIN(1, 8)
+#define WMT_PIN_SPI0SS WMT_PIN(1, 9)
+#define WMT_PIN_SPI0MISO WMT_PIN(1, 10)
+#define WMT_PIN_SPI0MOSI WMT_PIN(1, 11)
+#define WMT_PIN_SPI1CLK WMT_PIN(1, 12)
+#define WMT_PIN_SPI1SS WMT_PIN(1, 13)
+#define WMT_PIN_SPI1MISO WMT_PIN(1, 14)
+#define WMT_PIN_SPI1MOSI WMT_PIN(1, 15)
+#define WMT_PIN_SPI2CLK WMT_PIN(1, 16)
+#define WMT_PIN_SPI2SS WMT_PIN(1, 17)
+#define WMT_PIN_SPI2MISO WMT_PIN(1, 18)
+#define WMT_PIN_SPI2MOSI WMT_PIN(1, 19)
+#define WMT_PIN_SDDATA0 WMT_PIN(2, 0)
+#define WMT_PIN_SDDATA1 WMT_PIN(2, 1)
+#define WMT_PIN_SDDATA2 WMT_PIN(2, 2)
+#define WMT_PIN_SDDATA3 WMT_PIN(2, 3)
+#define WMT_PIN_MMCDATA0 WMT_PIN(2, 4)
+#define WMT_PIN_MMCDATA1 WMT_PIN(2, 5)
+#define WMT_PIN_MMCDATA2 WMT_PIN(2, 6)
+#define WMT_PIN_MMCDATA3 WMT_PIN(2, 7)
+#define WMT_PIN_SDCLK WMT_PIN(2, 8)
+#define WMT_PIN_SDWP WMT_PIN(2, 9)
+#define WMT_PIN_SDCMD WMT_PIN(2, 10)
+#define WMT_PIN_MSDATA0 WMT_PIN(2, 16)
+#define WMT_PIN_MSDATA1 WMT_PIN(2, 17)
+#define WMT_PIN_MSDATA2 WMT_PIN(2, 18)
+#define WMT_PIN_MSDATA3 WMT_PIN(2, 19)
+#define WMT_PIN_MSCLK WMT_PIN(2, 20)
+#define WMT_PIN_MSBS WMT_PIN(2, 21)
+#define WMT_PIN_MSINS WMT_PIN(2, 22)
+#define WMT_PIN_I2C0SCL WMT_PIN(2, 24)
+#define WMT_PIN_I2C0SDA WMT_PIN(2, 25)
+#define WMT_PIN_I2C1SCL WMT_PIN(2, 26)
+#define WMT_PIN_I2C1SDA WMT_PIN(2, 27)
+#define WMT_PIN_MII0RXD0 WMT_PIN(3, 0)
+#define WMT_PIN_MII0RXD1 WMT_PIN(3, 1)
+#define WMT_PIN_MII0RXD2 WMT_PIN(3, 2)
+#define WMT_PIN_MII0RXD3 WMT_PIN(3, 3)
+#define WMT_PIN_MII0RXCLK WMT_PIN(3, 4)
+#define WMT_PIN_MII0RXDV WMT_PIN(3, 5)
+#define WMT_PIN_MII0RXERR WMT_PIN(3, 6)
+#define WMT_PIN_MII0PHYRST WMT_PIN(3, 7)
+#define WMT_PIN_MII0TXD0 WMT_PIN(3, 8)
+#define WMT_PIN_MII0TXD1 WMT_PIN(3, 9)
+#define WMT_PIN_MII0TXD2 WMT_PIN(3, 10)
+#define WMT_PIN_MII0TXD3 WMT_PIN(3, 11)
+#define WMT_PIN_MII0TXCLK WMT_PIN(3, 12)
+#define WMT_PIN_MII0TXEN WMT_PIN(3, 13)
+#define WMT_PIN_MII0TXERR WMT_PIN(3, 14)
+#define WMT_PIN_MII0PHYPD WMT_PIN(3, 15)
+#define WMT_PIN_MII0COL WMT_PIN(3, 16)
+#define WMT_PIN_MII0CRS WMT_PIN(3, 17)
+#define WMT_PIN_MII0MDIO WMT_PIN(3, 18)
+#define WMT_PIN_MII0MDC WMT_PIN(3, 19)
+#define WMT_PIN_SEECS WMT_PIN(3, 20)
+#define WMT_PIN_SEECK WMT_PIN(3, 21)
+#define WMT_PIN_SEEDI WMT_PIN(3, 22)
+#define WMT_PIN_SEEDO WMT_PIN(3, 23)
+#define WMT_PIN_IDEDREQ0 WMT_PIN(3, 24)
+#define WMT_PIN_IDEDREQ1 WMT_PIN(3, 25)
+#define WMT_PIN_IDEIOW WMT_PIN(3, 26)
+#define WMT_PIN_IDEIOR WMT_PIN(3, 27)
+#define WMT_PIN_IDEDACK WMT_PIN(3, 28)
+#define WMT_PIN_IDEIORDY WMT_PIN(3, 29)
+#define WMT_PIN_IDEINTRQ WMT_PIN(3, 30)
+#define WMT_PIN_VDIN0 WMT_PIN(4, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(4, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(4, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(4, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(4, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(4, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(4, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(4, 7)
+#define WMT_PIN_VDOUT0 WMT_PIN(4, 8)
+#define WMT_PIN_VDOUT1 WMT_PIN(4, 9)
+#define WMT_PIN_VDOUT2 WMT_PIN(4, 10)
+#define WMT_PIN_VDOUT3 WMT_PIN(4, 11)
+#define WMT_PIN_VDOUT4 WMT_PIN(4, 12)
+#define WMT_PIN_VDOUT5 WMT_PIN(4, 13)
+#define WMT_PIN_NANDCLE0 WMT_PIN(4, 14)
+#define WMT_PIN_NANDCLE1 WMT_PIN(4, 15)
+#define WMT_PIN_VDOUT6_7 WMT_PIN(4, 16)
+#define WMT_PIN_VHSYNC WMT_PIN(4, 17)
+#define WMT_PIN_VVSYNC WMT_PIN(4, 18)
+#define WMT_PIN_TSDIN0 WMT_PIN(5, 8)
+#define WMT_PIN_TSDIN1 WMT_PIN(5, 9)
+#define WMT_PIN_TSDIN2 WMT_PIN(5, 10)
+#define WMT_PIN_TSDIN3 WMT_PIN(5, 11)
+#define WMT_PIN_TSDIN4 WMT_PIN(5, 12)
+#define WMT_PIN_TSDIN5 WMT_PIN(5, 13)
+#define WMT_PIN_TSDIN6 WMT_PIN(5, 14)
+#define WMT_PIN_TSDIN7 WMT_PIN(5, 15)
+#define WMT_PIN_TSSYNC WMT_PIN(5, 16)
+#define WMT_PIN_TSVALID WMT_PIN(5, 17)
+#define WMT_PIN_TSCLK WMT_PIN(5, 18)
+#define WMT_PIN_LCDD0 WMT_PIN(6, 0)
+#define WMT_PIN_LCDD1 WMT_PIN(6, 1)
+#define WMT_PIN_LCDD2 WMT_PIN(6, 2)
+#define WMT_PIN_LCDD3 WMT_PIN(6, 3)
+#define WMT_PIN_LCDD4 WMT_PIN(6, 4)
+#define WMT_PIN_LCDD5 WMT_PIN(6, 5)
+#define WMT_PIN_LCDD6 WMT_PIN(6, 6)
+#define WMT_PIN_LCDD7 WMT_PIN(6, 7)
+#define WMT_PIN_LCDD8 WMT_PIN(6, 8)
+#define WMT_PIN_LCDD9 WMT_PIN(6, 9)
+#define WMT_PIN_LCDD10 WMT_PIN(6, 10)
+#define WMT_PIN_LCDD11 WMT_PIN(6, 11)
+#define WMT_PIN_LCDD12 WMT_PIN(6, 12)
+#define WMT_PIN_LCDD13 WMT_PIN(6, 13)
+#define WMT_PIN_LCDD14 WMT_PIN(6, 14)
+#define WMT_PIN_LCDD15 WMT_PIN(6, 15)
+#define WMT_PIN_LCDD16 WMT_PIN(6, 16)
+#define WMT_PIN_LCDD17 WMT_PIN(6, 17)
+#define WMT_PIN_LCDCLK WMT_PIN(6, 18)
+#define WMT_PIN_LCDDEN WMT_PIN(6, 19)
+#define WMT_PIN_LCDLINE WMT_PIN(6, 20)
+#define WMT_PIN_LCDFRM WMT_PIN(6, 21)
+#define WMT_PIN_LCDBIAS WMT_PIN(6, 22)
+
+static const struct pinctrl_pin_desc vt8500_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO8, "extgpio8"),
+ PINCTRL_PIN(WMT_PIN_UART0RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI1CLK, "spi1_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI1SS, "spi1_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI1MOSI, "spi1_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI2CLK, "spi2_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI2SS, "spi2_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI2MISO, "spi2_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI2MOSI, "spi2_mosi"),
+ PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"),
+ PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"),
+ PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"),
+ PINCTRL_PIN(WMT_PIN_SDDATA3, "sd_data3"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA0, "mmc_data0"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA1, "mmc_data1"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA2, "mmc_data2"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA3, "mmc_data3"),
+ PINCTRL_PIN(WMT_PIN_SDCLK, "sd_clk"),
+ PINCTRL_PIN(WMT_PIN_SDWP, "sd_wp"),
+ PINCTRL_PIN(WMT_PIN_SDCMD, "sd_cmd"),
+ PINCTRL_PIN(WMT_PIN_MSDATA0, "ms_data0"),
+ PINCTRL_PIN(WMT_PIN_MSDATA1, "ms_data1"),
+ PINCTRL_PIN(WMT_PIN_MSDATA2, "ms_data2"),
+ PINCTRL_PIN(WMT_PIN_MSDATA3, "ms_data3"),
+ PINCTRL_PIN(WMT_PIN_MSCLK, "ms_clk"),
+ PINCTRL_PIN(WMT_PIN_MSBS, "ms_bs"),
+ PINCTRL_PIN(WMT_PIN_MSINS, "ms_ins"),
+ PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD0, "mii0_rxd0"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD1, "mii0_rxd1"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD2, "mii0_rxd2"),
+ PINCTRL_PIN(WMT_PIN_MII0RXD3, "mii0_rxd3"),
+ PINCTRL_PIN(WMT_PIN_MII0RXCLK, "mii0_rxclk"),
+ PINCTRL_PIN(WMT_PIN_MII0RXDV, "mii0_rxdv"),
+ PINCTRL_PIN(WMT_PIN_MII0RXERR, "mii0_rxerr"),
+ PINCTRL_PIN(WMT_PIN_MII0PHYRST, "mii0_phyrst"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD0, "mii0_txd0"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD1, "mii0_txd1"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD2, "mii0_txd2"),
+ PINCTRL_PIN(WMT_PIN_MII0TXD3, "mii0_txd3"),
+ PINCTRL_PIN(WMT_PIN_MII0TXCLK, "mii0_txclk"),
+ PINCTRL_PIN(WMT_PIN_MII0TXEN, "mii0_txen"),
+ PINCTRL_PIN(WMT_PIN_MII0TXERR, "mii0_txerr"),
+ PINCTRL_PIN(WMT_PIN_MII0PHYPD, "mii0_phypd"),
+ PINCTRL_PIN(WMT_PIN_MII0COL, "mii0_col"),
+ PINCTRL_PIN(WMT_PIN_MII0CRS, "mii0_crs"),
+ PINCTRL_PIN(WMT_PIN_MII0MDIO, "mii0_mdio"),
+ PINCTRL_PIN(WMT_PIN_MII0MDC, "mii0_mdc"),
+ PINCTRL_PIN(WMT_PIN_SEECS, "see_cs"),
+ PINCTRL_PIN(WMT_PIN_SEECK, "see_ck"),
+ PINCTRL_PIN(WMT_PIN_SEEDI, "see_di"),
+ PINCTRL_PIN(WMT_PIN_SEEDO, "see_do"),
+ PINCTRL_PIN(WMT_PIN_IDEDREQ0, "ide_dreq0"),
+ PINCTRL_PIN(WMT_PIN_IDEDREQ1, "ide_dreq1"),
+ PINCTRL_PIN(WMT_PIN_IDEIOW, "ide_iow"),
+ PINCTRL_PIN(WMT_PIN_IDEIOR, "ide_ior"),
+ PINCTRL_PIN(WMT_PIN_IDEDACK, "ide_dack"),
+ PINCTRL_PIN(WMT_PIN_IDEIORDY, "ide_iordy"),
+ PINCTRL_PIN(WMT_PIN_IDEINTRQ, "ide_intrq"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_NANDCLE0, "nand_cle0"),
+ PINCTRL_PIN(WMT_PIN_NANDCLE1, "nand_cle1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6_7, "vdout6_7"),
+ PINCTRL_PIN(WMT_PIN_VHSYNC, "vhsync"),
+ PINCTRL_PIN(WMT_PIN_VVSYNC, "vvsync"),
+ PINCTRL_PIN(WMT_PIN_TSDIN0, "tsdin0"),
+ PINCTRL_PIN(WMT_PIN_TSDIN1, "tsdin1"),
+ PINCTRL_PIN(WMT_PIN_TSDIN2, "tsdin2"),
+ PINCTRL_PIN(WMT_PIN_TSDIN3, "tsdin3"),
+ PINCTRL_PIN(WMT_PIN_TSDIN4, "tsdin4"),
+ PINCTRL_PIN(WMT_PIN_TSDIN5, "tsdin5"),
+ PINCTRL_PIN(WMT_PIN_TSDIN6, "tsdin6"),
+ PINCTRL_PIN(WMT_PIN_TSDIN7, "tsdin7"),
+ PINCTRL_PIN(WMT_PIN_TSSYNC, "tssync"),
+ PINCTRL_PIN(WMT_PIN_TSVALID, "tsvalid"),
+ PINCTRL_PIN(WMT_PIN_TSCLK, "tsclk"),
+ PINCTRL_PIN(WMT_PIN_LCDD0, "lcd_d0"),
+ PINCTRL_PIN(WMT_PIN_LCDD1, "lcd_d1"),
+ PINCTRL_PIN(WMT_PIN_LCDD2, "lcd_d2"),
+ PINCTRL_PIN(WMT_PIN_LCDD3, "lcd_d3"),
+ PINCTRL_PIN(WMT_PIN_LCDD4, "lcd_d4"),
+ PINCTRL_PIN(WMT_PIN_LCDD5, "lcd_d5"),
+ PINCTRL_PIN(WMT_PIN_LCDD6, "lcd_d6"),
+ PINCTRL_PIN(WMT_PIN_LCDD7, "lcd_d7"),
+ PINCTRL_PIN(WMT_PIN_LCDD8, "lcd_d8"),
+ PINCTRL_PIN(WMT_PIN_LCDD9, "lcd_d9"),
+ PINCTRL_PIN(WMT_PIN_LCDD10, "lcd_d10"),
+ PINCTRL_PIN(WMT_PIN_LCDD11, "lcd_d11"),
+ PINCTRL_PIN(WMT_PIN_LCDD12, "lcd_d12"),
+ PINCTRL_PIN(WMT_PIN_LCDD13, "lcd_d13"),
+ PINCTRL_PIN(WMT_PIN_LCDD14, "lcd_d14"),
+ PINCTRL_PIN(WMT_PIN_LCDD15, "lcd_d15"),
+ PINCTRL_PIN(WMT_PIN_LCDD16, "lcd_d16"),
+ PINCTRL_PIN(WMT_PIN_LCDD17, "lcd_d17"),
+ PINCTRL_PIN(WMT_PIN_LCDCLK, "lcd_clk"),
+ PINCTRL_PIN(WMT_PIN_LCDDEN, "lcd_den"),
+ PINCTRL_PIN(WMT_PIN_LCDLINE, "lcd_line"),
+ PINCTRL_PIN(WMT_PIN_LCDFRM, "lcd_frm"),
+ PINCTRL_PIN(WMT_PIN_LCDBIAS, "lcd_bias"),
+};
+
+/* Order of these names must match the above list */
+static const char * const vt8500_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "extgpio8",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "spi0_clk",
+ "spi0_ss",
+ "spi0_miso",
+ "spi0_mosi",
+ "spi1_clk",
+ "spi1_ss",
+ "spi1_miso",
+ "spi1_mosi",
+ "spi2_clk",
+ "spi2_ss",
+ "spi2_miso",
+ "spi2_mosi",
+ "sd_data0",
+ "sd_data1",
+ "sd_data2",
+ "sd_data3",
+ "mmc_data0",
+ "mmc_data1",
+ "mmc_data2",
+ "mmc_data3",
+ "sd_clk",
+ "sd_wp",
+ "sd_cmd",
+ "ms_data0",
+ "ms_data1",
+ "ms_data2",
+ "ms_data3",
+ "ms_clk",
+ "ms_bs",
+ "ms_ins",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "mii0_rxd0",
+ "mii0_rxd1",
+ "mii0_rxd2",
+ "mii0_rxd3",
+ "mii0_rxclk",
+ "mii0_rxdv",
+ "mii0_rxerr",
+ "mii0_phyrst",
+ "mii0_txd0",
+ "mii0_txd1",
+ "mii0_txd2",
+ "mii0_txd3",
+ "mii0_txclk",
+ "mii0_txen",
+ "mii0_txerr",
+ "mii0_phypd",
+ "mii0_col",
+ "mii0_crs",
+ "mii0_mdio",
+ "mii0_mdc",
+ "see_cs",
+ "see_ck",
+ "see_di",
+ "see_do",
+ "ide_dreq0",
+ "ide_dreq1",
+ "ide_iow",
+ "ide_ior",
+ "ide_dack",
+ "ide_iordy",
+ "ide_intrq",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "nand_cle0",
+ "nand_cle1",
+ "vdout6_7",
+ "vhsync",
+ "vvsync",
+ "tsdin0",
+ "tsdin1",
+ "tsdin2",
+ "tsdin3",
+ "tsdin4",
+ "tsdin5",
+ "tsdin6",
+ "tsdin7",
+ "tssync",
+ "tsvalid",
+ "tsclk",
+ "lcd_d0",
+ "lcd_d1",
+ "lcd_d2",
+ "lcd_d3",
+ "lcd_d4",
+ "lcd_d5",
+ "lcd_d6",
+ "lcd_d7",
+ "lcd_d8",
+ "lcd_d9",
+ "lcd_d10",
+ "lcd_d11",
+ "lcd_d12",
+ "lcd_d13",
+ "lcd_d14",
+ "lcd_d15",
+ "lcd_d16",
+ "lcd_d17",
+ "lcd_clk",
+ "lcd_den",
+ "lcd_line",
+ "lcd_frm",
+ "lcd_bias",
+};
+
+static int vt8500_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = vt8500_banks;
+ data->nbanks = ARRAY_SIZE(vt8500_banks);
+ data->pins = vt8500_pins;
+ data->npins = ARRAY_SIZE(vt8500_pins);
+ data->groups = vt8500_groups;
+ data->ngroups = ARRAY_SIZE(vt8500_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int vt8500_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "via,vt8500-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = vt8500_pinctrl_probe,
+ .remove = vt8500_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-vt8500",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("VIA VT8500 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8505.c b/drivers/pinctrl/vt8500/pinctrl-wm8505.c
new file mode 100644
index 0000000..483ba73
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8505.c
@@ -0,0 +1,532 @@
+/*
+ * Pinctrl data for Wondermedia WM8505 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8505_banks[] = {
+ WMT_PINCTRL_BANK(0x64, 0x8C, 0xB4, 0xDC, NO_REG, NO_REG), /* 0 */
+ WMT_PINCTRL_BANK(0x40, 0x68, 0x90, 0xB8, NO_REG, NO_REG), /* 1 */
+ WMT_PINCTRL_BANK(0x44, 0x6C, 0x94, 0xBC, NO_REG, NO_REG), /* 2 */
+ WMT_PINCTRL_BANK(0x48, 0x70, 0x98, 0xC0, NO_REG, NO_REG), /* 3 */
+ WMT_PINCTRL_BANK(0x4C, 0x74, 0x9C, 0xC4, NO_REG, NO_REG), /* 4 */
+ WMT_PINCTRL_BANK(0x50, 0x78, 0xA0, 0xC8, NO_REG, NO_REG), /* 5 */
+ WMT_PINCTRL_BANK(0x54, 0x7C, 0xA4, 0xD0, NO_REG, NO_REG), /* 6 */
+ WMT_PINCTRL_BANK(0x58, 0x80, 0xA8, 0xD4, NO_REG, NO_REG), /* 7 */
+ WMT_PINCTRL_BANK(0x5C, 0x84, 0xAC, 0xD8, NO_REG, NO_REG), /* 8 */
+ WMT_PINCTRL_BANK(0x60, 0x88, 0xB0, 0xDC, NO_REG, NO_REG), /* 9 */
+ WMT_PINCTRL_BANK(0x500, 0x504, 0x508, 0x50C, NO_REG, NO_REG), /* 10 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17)
+#define WMT_PIN_WAKEUP2 WMT_PIN(0, 18)
+#define WMT_PIN_WAKEUP3 WMT_PIN(0, 19)
+#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21)
+#define WMT_PIN_SDDATA0 WMT_PIN(1, 0)
+#define WMT_PIN_SDDATA1 WMT_PIN(1, 1)
+#define WMT_PIN_SDDATA2 WMT_PIN(1, 2)
+#define WMT_PIN_SDDATA3 WMT_PIN(1, 3)
+#define WMT_PIN_MMCDATA0 WMT_PIN(1, 4)
+#define WMT_PIN_MMCDATA1 WMT_PIN(1, 5)
+#define WMT_PIN_MMCDATA2 WMT_PIN(1, 6)
+#define WMT_PIN_MMCDATA3 WMT_PIN(1, 7)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_VDOUT0 WMT_PIN(2, 8)
+#define WMT_PIN_VDOUT1 WMT_PIN(2, 9)
+#define WMT_PIN_VDOUT2 WMT_PIN(2, 10)
+#define WMT_PIN_VDOUT3 WMT_PIN(2, 11)
+#define WMT_PIN_VDOUT4 WMT_PIN(2, 12)
+#define WMT_PIN_VDOUT5 WMT_PIN(2, 13)
+#define WMT_PIN_VDOUT6 WMT_PIN(2, 14)
+#define WMT_PIN_VDOUT7 WMT_PIN(2, 15)
+#define WMT_PIN_VDOUT8 WMT_PIN(2, 16)
+#define WMT_PIN_VDOUT9 WMT_PIN(2, 17)
+#define WMT_PIN_VDOUT10 WMT_PIN(2, 18)
+#define WMT_PIN_VDOUT11 WMT_PIN(2, 19)
+#define WMT_PIN_VDOUT12 WMT_PIN(2, 20)
+#define WMT_PIN_VDOUT13 WMT_PIN(2, 21)
+#define WMT_PIN_VDOUT14 WMT_PIN(2, 22)
+#define WMT_PIN_VDOUT15 WMT_PIN(2, 23)
+#define WMT_PIN_VDOUT16 WMT_PIN(2, 24)
+#define WMT_PIN_VDOUT17 WMT_PIN(2, 25)
+#define WMT_PIN_VDOUT18 WMT_PIN(2, 26)
+#define WMT_PIN_VDOUT19 WMT_PIN(2, 27)
+#define WMT_PIN_VDOUT20 WMT_PIN(2, 28)
+#define WMT_PIN_VDOUT21 WMT_PIN(2, 29)
+#define WMT_PIN_VDOUT22 WMT_PIN(2, 30)
+#define WMT_PIN_VDOUT23 WMT_PIN(2, 31)
+#define WMT_PIN_VHSYNC WMT_PIN(3, 0)
+#define WMT_PIN_VVSYNC WMT_PIN(3, 1)
+#define WMT_PIN_VGAHSYNC WMT_PIN(3, 2)
+#define WMT_PIN_VGAVSYNC WMT_PIN(3, 3)
+#define WMT_PIN_VDHSYNC WMT_PIN(3, 4)
+#define WMT_PIN_VDVSYNC WMT_PIN(3, 5)
+#define WMT_PIN_NORD0 WMT_PIN(4, 0)
+#define WMT_PIN_NORD1 WMT_PIN(4, 1)
+#define WMT_PIN_NORD2 WMT_PIN(4, 2)
+#define WMT_PIN_NORD3 WMT_PIN(4, 3)
+#define WMT_PIN_NORD4 WMT_PIN(4, 4)
+#define WMT_PIN_NORD5 WMT_PIN(4, 5)
+#define WMT_PIN_NORD6 WMT_PIN(4, 6)
+#define WMT_PIN_NORD7 WMT_PIN(4, 7)
+#define WMT_PIN_NORD8 WMT_PIN(4, 8)
+#define WMT_PIN_NORD9 WMT_PIN(4, 9)
+#define WMT_PIN_NORD10 WMT_PIN(4, 10)
+#define WMT_PIN_NORD11 WMT_PIN(4, 11)
+#define WMT_PIN_NORD12 WMT_PIN(4, 12)
+#define WMT_PIN_NORD13 WMT_PIN(4, 13)
+#define WMT_PIN_NORD14 WMT_PIN(4, 14)
+#define WMT_PIN_NORD15 WMT_PIN(4, 15)
+#define WMT_PIN_NORA0 WMT_PIN(5, 0)
+#define WMT_PIN_NORA1 WMT_PIN(5, 1)
+#define WMT_PIN_NORA2 WMT_PIN(5, 2)
+#define WMT_PIN_NORA3 WMT_PIN(5, 3)
+#define WMT_PIN_NORA4 WMT_PIN(5, 4)
+#define WMT_PIN_NORA5 WMT_PIN(5, 5)
+#define WMT_PIN_NORA6 WMT_PIN(5, 6)
+#define WMT_PIN_NORA7 WMT_PIN(5, 7)
+#define WMT_PIN_NORA8 WMT_PIN(5, 8)
+#define WMT_PIN_NORA9 WMT_PIN(5, 9)
+#define WMT_PIN_NORA10 WMT_PIN(5, 10)
+#define WMT_PIN_NORA11 WMT_PIN(5, 11)
+#define WMT_PIN_NORA12 WMT_PIN(5, 12)
+#define WMT_PIN_NORA13 WMT_PIN(5, 13)
+#define WMT_PIN_NORA14 WMT_PIN(5, 14)
+#define WMT_PIN_NORA15 WMT_PIN(5, 15)
+#define WMT_PIN_NORA16 WMT_PIN(5, 16)
+#define WMT_PIN_NORA17 WMT_PIN(5, 17)
+#define WMT_PIN_NORA18 WMT_PIN(5, 18)
+#define WMT_PIN_NORA19 WMT_PIN(5, 19)
+#define WMT_PIN_NORA20 WMT_PIN(5, 20)
+#define WMT_PIN_NORA21 WMT_PIN(5, 21)
+#define WMT_PIN_NORA22 WMT_PIN(5, 22)
+#define WMT_PIN_NORA23 WMT_PIN(5, 23)
+#define WMT_PIN_NORA24 WMT_PIN(5, 24)
+#define WMT_PIN_AC97SDI WMT_PIN(6, 0)
+#define WMT_PIN_AC97SYNC WMT_PIN(6, 1)
+#define WMT_PIN_AC97SDO WMT_PIN(6, 2)
+#define WMT_PIN_AC97BCLK WMT_PIN(6, 3)
+#define WMT_PIN_AC97RST WMT_PIN(6, 4)
+#define WMT_PIN_SFDO WMT_PIN(7, 0)
+#define WMT_PIN_SFCS0 WMT_PIN(7, 1)
+#define WMT_PIN_SFCS1 WMT_PIN(7, 2)
+#define WMT_PIN_SFCLK WMT_PIN(7, 3)
+#define WMT_PIN_SFDI WMT_PIN(7, 4)
+#define WMT_PIN_SPI0CLK WMT_PIN(8, 0)
+#define WMT_PIN_SPI0MISO WMT_PIN(8, 1)
+#define WMT_PIN_SPI0MOSI WMT_PIN(8, 2)
+#define WMT_PIN_SPI0SS WMT_PIN(8, 3)
+#define WMT_PIN_SPI1CLK WMT_PIN(8, 4)
+#define WMT_PIN_SPI1MISO WMT_PIN(8, 5)
+#define WMT_PIN_SPI1MOSI WMT_PIN(8, 6)
+#define WMT_PIN_SPI1SS WMT_PIN(8, 7)
+#define WMT_PIN_SPI2CLK WMT_PIN(8, 8)
+#define WMT_PIN_SPI2MISO WMT_PIN(8, 9)
+#define WMT_PIN_SPI2MOSI WMT_PIN(8, 10)
+#define WMT_PIN_SPI2SS WMT_PIN(8, 11)
+#define WMT_PIN_UART0_RTS WMT_PIN(9, 0)
+#define WMT_PIN_UART0_TXD WMT_PIN(9, 1)
+#define WMT_PIN_UART0_CTS WMT_PIN(9, 2)
+#define WMT_PIN_UART0_RXD WMT_PIN(9, 3)
+#define WMT_PIN_UART1_RTS WMT_PIN(9, 4)
+#define WMT_PIN_UART1_TXD WMT_PIN(9, 5)
+#define WMT_PIN_UART1_CTS WMT_PIN(9, 6)
+#define WMT_PIN_UART1_RXD WMT_PIN(9, 7)
+#define WMT_PIN_UART2_RTS WMT_PIN(9, 8)
+#define WMT_PIN_UART2_TXD WMT_PIN(9, 9)
+#define WMT_PIN_UART2_CTS WMT_PIN(9, 10)
+#define WMT_PIN_UART2_RXD WMT_PIN(9, 11)
+#define WMT_PIN_UART3_RTS WMT_PIN(9, 12)
+#define WMT_PIN_UART3_TXD WMT_PIN(9, 13)
+#define WMT_PIN_UART3_CTS WMT_PIN(9, 14)
+#define WMT_PIN_UART3_RXD WMT_PIN(9, 15)
+#define WMT_PIN_I2C0SCL WMT_PIN(10, 0)
+#define WMT_PIN_I2C0SDA WMT_PIN(10, 1)
+#define WMT_PIN_I2C1SCL WMT_PIN(10, 2)
+#define WMT_PIN_I2C1SDA WMT_PIN(10, 3)
+#define WMT_PIN_I2C2SCL WMT_PIN(10, 4)
+#define WMT_PIN_I2C2SDA WMT_PIN(10, 5)
+
+static const struct pinctrl_pin_desc wm8505_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
+ PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"),
+ PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"),
+ PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"),
+ PINCTRL_PIN(WMT_PIN_SDDATA3, "sd_data3"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA0, "mmc_data0"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA1, "mmc_data1"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA2, "mmc_data2"),
+ PINCTRL_PIN(WMT_PIN_MMCDATA3, "mmc_data3"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VHSYNC, "v_hsync"),
+ PINCTRL_PIN(WMT_PIN_VVSYNC, "v_vsync"),
+ PINCTRL_PIN(WMT_PIN_VGAHSYNC, "vga_hsync"),
+ PINCTRL_PIN(WMT_PIN_VGAVSYNC, "vga_vsync"),
+ PINCTRL_PIN(WMT_PIN_VDHSYNC, "vd_hsync"),
+ PINCTRL_PIN(WMT_PIN_VDVSYNC, "vd_vsync"),
+ PINCTRL_PIN(WMT_PIN_NORD0, "nor_d0"),
+ PINCTRL_PIN(WMT_PIN_NORD1, "nor_d1"),
+ PINCTRL_PIN(WMT_PIN_NORD2, "nor_d2"),
+ PINCTRL_PIN(WMT_PIN_NORD3, "nor_d3"),
+ PINCTRL_PIN(WMT_PIN_NORD4, "nor_d4"),
+ PINCTRL_PIN(WMT_PIN_NORD5, "nor_d5"),
+ PINCTRL_PIN(WMT_PIN_NORD6, "nor_d6"),
+ PINCTRL_PIN(WMT_PIN_NORD7, "nor_d7"),
+ PINCTRL_PIN(WMT_PIN_NORD8, "nor_d8"),
+ PINCTRL_PIN(WMT_PIN_NORD9, "nor_d9"),
+ PINCTRL_PIN(WMT_PIN_NORD10, "nor_d10"),
+ PINCTRL_PIN(WMT_PIN_NORD11, "nor_d11"),
+ PINCTRL_PIN(WMT_PIN_NORD12, "nor_d12"),
+ PINCTRL_PIN(WMT_PIN_NORD13, "nor_d13"),
+ PINCTRL_PIN(WMT_PIN_NORD14, "nor_d14"),
+ PINCTRL_PIN(WMT_PIN_NORD15, "nor_d15"),
+ PINCTRL_PIN(WMT_PIN_NORA0, "nor_a0"),
+ PINCTRL_PIN(WMT_PIN_NORA1, "nor_a1"),
+ PINCTRL_PIN(WMT_PIN_NORA2, "nor_a2"),
+ PINCTRL_PIN(WMT_PIN_NORA3, "nor_a3"),
+ PINCTRL_PIN(WMT_PIN_NORA4, "nor_a4"),
+ PINCTRL_PIN(WMT_PIN_NORA5, "nor_a5"),
+ PINCTRL_PIN(WMT_PIN_NORA6, "nor_a6"),
+ PINCTRL_PIN(WMT_PIN_NORA7, "nor_a7"),
+ PINCTRL_PIN(WMT_PIN_NORA8, "nor_a8"),
+ PINCTRL_PIN(WMT_PIN_NORA9, "nor_a9"),
+ PINCTRL_PIN(WMT_PIN_NORA10, "nor_a10"),
+ PINCTRL_PIN(WMT_PIN_NORA11, "nor_a11"),
+ PINCTRL_PIN(WMT_PIN_NORA12, "nor_a12"),
+ PINCTRL_PIN(WMT_PIN_NORA13, "nor_a13"),
+ PINCTRL_PIN(WMT_PIN_NORA14, "nor_a14"),
+ PINCTRL_PIN(WMT_PIN_NORA15, "nor_a15"),
+ PINCTRL_PIN(WMT_PIN_NORA16, "nor_a16"),
+ PINCTRL_PIN(WMT_PIN_NORA17, "nor_a17"),
+ PINCTRL_PIN(WMT_PIN_NORA18, "nor_a18"),
+ PINCTRL_PIN(WMT_PIN_NORA19, "nor_a19"),
+ PINCTRL_PIN(WMT_PIN_NORA20, "nor_a20"),
+ PINCTRL_PIN(WMT_PIN_NORA21, "nor_a21"),
+ PINCTRL_PIN(WMT_PIN_NORA22, "nor_a22"),
+ PINCTRL_PIN(WMT_PIN_NORA23, "nor_a23"),
+ PINCTRL_PIN(WMT_PIN_NORA24, "nor_a24"),
+ PINCTRL_PIN(WMT_PIN_AC97SDI, "ac97_sdi"),
+ PINCTRL_PIN(WMT_PIN_AC97SYNC, "ac97_sync"),
+ PINCTRL_PIN(WMT_PIN_AC97SDO, "ac97_sdo"),
+ PINCTRL_PIN(WMT_PIN_AC97BCLK, "ac97_bclk"),
+ PINCTRL_PIN(WMT_PIN_AC97RST, "ac97_rst"),
+ PINCTRL_PIN(WMT_PIN_SFDO, "sf_do"),
+ PINCTRL_PIN(WMT_PIN_SFCS0, "sf_cs0"),
+ PINCTRL_PIN(WMT_PIN_SFCS1, "sf_cs1"),
+ PINCTRL_PIN(WMT_PIN_SFCLK, "sf_clk"),
+ PINCTRL_PIN(WMT_PIN_SFDI, "sf_di"),
+ PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI1CLK, "spi1_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI1MOSI, "spi1_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI1SS, "spi1_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI2CLK, "spi2_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI2MISO, "spi2_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI2MOSI, "spi2_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI2SS, "spi2_ss"),
+ PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART3_RTS, "uart3_rts"),
+ PINCTRL_PIN(WMT_PIN_UART3_TXD, "uart3_txd"),
+ PINCTRL_PIN(WMT_PIN_UART3_CTS, "uart3_cts"),
+ PINCTRL_PIN(WMT_PIN_UART3_RXD, "uart3_rxd"),
+ PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C2SCL, "i2c2_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C2SDA, "i2c2_sda"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8505_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "wakeup2",
+ "wakeup3",
+ "susgpio0",
+ "sd_data0",
+ "sd_data1",
+ "sd_data2",
+ "sd_data3",
+ "mmc_data0",
+ "mmc_data1",
+ "mmc_data2",
+ "mmc_data3",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "v_hsync",
+ "v_vsync",
+ "vga_hsync",
+ "vga_vsync",
+ "vd_hsync",
+ "vd_vsync",
+ "nor_d0",
+ "nor_d1",
+ "nor_d2",
+ "nor_d3",
+ "nor_d4",
+ "nor_d5",
+ "nor_d6",
+ "nor_d7",
+ "nor_d8",
+ "nor_d9",
+ "nor_d10",
+ "nor_d11",
+ "nor_d12",
+ "nor_d13",
+ "nor_d14",
+ "nor_d15",
+ "nor_a0",
+ "nor_a1",
+ "nor_a2",
+ "nor_a3",
+ "nor_a4",
+ "nor_a5",
+ "nor_a6",
+ "nor_a7",
+ "nor_a8",
+ "nor_a9",
+ "nor_a10",
+ "nor_a11",
+ "nor_a12",
+ "nor_a13",
+ "nor_a14",
+ "nor_a15",
+ "nor_a16",
+ "nor_a17",
+ "nor_a18",
+ "nor_a19",
+ "nor_a20",
+ "nor_a21",
+ "nor_a22",
+ "nor_a23",
+ "nor_a24",
+ "ac97_sdi",
+ "ac97_sync",
+ "ac97_sdo",
+ "ac97_bclk",
+ "ac97_rst",
+ "sf_do",
+ "sf_cs0",
+ "sf_cs1",
+ "sf_clk",
+ "sf_di",
+ "spi0_clk",
+ "spi0_miso",
+ "spi0_mosi",
+ "spi0_ss",
+ "spi1_clk",
+ "spi1_miso",
+ "spi1_mosi",
+ "spi1_ss",
+ "spi2_clk",
+ "spi2_miso",
+ "spi2_mosi",
+ "spi2_ss",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "uart3_rts",
+ "uart3_txd",
+ "uart3_cts",
+ "uart3_rxd",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "i2c2_scl",
+ "i2c2_sda",
+};
+
+static int wm8505_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8505_banks;
+ data->nbanks = ARRAY_SIZE(wm8505_banks);
+ data->pins = wm8505_pins;
+ data->npins = ARRAY_SIZE(wm8505_pins);
+ data->groups = wm8505_groups;
+ data->ngroups = ARRAY_SIZE(wm8505_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8505_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8505-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8505_pinctrl_probe,
+ .remove = wm8505_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8505",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8505 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8650.c b/drivers/pinctrl/vt8500/pinctrl-wm8650.c
new file mode 100644
index 0000000..7de57f0
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8650.c
@@ -0,0 +1,370 @@
+/*
+ * Pinctrl data for Wondermedia WM8650 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8650_banks[] = {
+ WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
+ WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
+ WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
+ WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
+ WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
+ WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
+ WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
+ WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17)
+#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21)
+#define WMT_PIN_SD0CD WMT_PIN(0, 28)
+#define WMT_PIN_SD1CD WMT_PIN(0, 29)
+#define WMT_PIN_VDOUT0 WMT_PIN(1, 0)
+#define WMT_PIN_VDOUT1 WMT_PIN(1, 1)
+#define WMT_PIN_VDOUT2 WMT_PIN(1, 2)
+#define WMT_PIN_VDOUT3 WMT_PIN(1, 3)
+#define WMT_PIN_VDOUT4 WMT_PIN(1, 4)
+#define WMT_PIN_VDOUT5 WMT_PIN(1, 5)
+#define WMT_PIN_VDOUT6 WMT_PIN(1, 6)
+#define WMT_PIN_VDOUT7 WMT_PIN(1, 7)
+#define WMT_PIN_VDOUT8 WMT_PIN(1, 8)
+#define WMT_PIN_VDOUT9 WMT_PIN(1, 9)
+#define WMT_PIN_VDOUT10 WMT_PIN(1, 10)
+#define WMT_PIN_VDOUT11 WMT_PIN(1, 11)
+#define WMT_PIN_VDOUT12 WMT_PIN(1, 12)
+#define WMT_PIN_VDOUT13 WMT_PIN(1, 13)
+#define WMT_PIN_VDOUT14 WMT_PIN(1, 14)
+#define WMT_PIN_VDOUT15 WMT_PIN(1, 15)
+#define WMT_PIN_VDOUT16 WMT_PIN(1, 16)
+#define WMT_PIN_VDOUT17 WMT_PIN(1, 17)
+#define WMT_PIN_VDOUT18 WMT_PIN(1, 18)
+#define WMT_PIN_VDOUT19 WMT_PIN(1, 19)
+#define WMT_PIN_VDOUT20 WMT_PIN(1, 20)
+#define WMT_PIN_VDOUT21 WMT_PIN(1, 21)
+#define WMT_PIN_VDOUT22 WMT_PIN(1, 22)
+#define WMT_PIN_VDOUT23 WMT_PIN(1, 23)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_I2C1SCL WMT_PIN(2, 12)
+#define WMT_PIN_I2C1SDA WMT_PIN(2, 13)
+#define WMT_PIN_SPI0MOSI WMT_PIN(2, 24)
+#define WMT_PIN_SPI0MISO WMT_PIN(2, 25)
+#define WMT_PIN_SPI0SS0 WMT_PIN(2, 26)
+#define WMT_PIN_SPI0CLK WMT_PIN(2, 27)
+#define WMT_PIN_SD0DATA0 WMT_PIN(3, 8)
+#define WMT_PIN_SD0DATA1 WMT_PIN(3, 9)
+#define WMT_PIN_SD0DATA2 WMT_PIN(3, 10)
+#define WMT_PIN_SD0DATA3 WMT_PIN(3, 11)
+#define WMT_PIN_SD0CLK WMT_PIN(3, 12)
+#define WMT_PIN_SD0WP WMT_PIN(3, 13)
+#define WMT_PIN_SD0CMD WMT_PIN(3, 14)
+#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24)
+#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25)
+#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26)
+#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27)
+#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28)
+#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29)
+#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30)
+#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31)
+#define WMT_PIN_I2C0SCL WMT_PIN(5, 8)
+#define WMT_PIN_I2C0SDA WMT_PIN(5, 9)
+#define WMT_PIN_UART0RTS WMT_PIN(5, 16)
+#define WMT_PIN_UART0TXD WMT_PIN(5, 17)
+#define WMT_PIN_UART0CTS WMT_PIN(5, 18)
+#define WMT_PIN_UART0RXD WMT_PIN(5, 19)
+#define WMT_PIN_UART1RTS WMT_PIN(5, 20)
+#define WMT_PIN_UART1TXD WMT_PIN(5, 21)
+#define WMT_PIN_UART1CTS WMT_PIN(5, 22)
+#define WMT_PIN_UART1RXD WMT_PIN(5, 23)
+#define WMT_PIN_UART2RTS WMT_PIN(5, 24)
+#define WMT_PIN_UART2TXD WMT_PIN(5, 25)
+#define WMT_PIN_UART2CTS WMT_PIN(5, 26)
+#define WMT_PIN_UART2RXD WMT_PIN(5, 27)
+#define WMT_PIN_UART3RTS WMT_PIN(5, 28)
+#define WMT_PIN_UART3TXD WMT_PIN(5, 29)
+#define WMT_PIN_UART3CTS WMT_PIN(5, 30)
+#define WMT_PIN_UART3RXD WMT_PIN(5, 31)
+#define WMT_PIN_KPADROW0 WMT_PIN(6, 16)
+#define WMT_PIN_KPADROW1 WMT_PIN(6, 17)
+#define WMT_PIN_KPADCOL0 WMT_PIN(6, 18)
+#define WMT_PIN_KPADCOL1 WMT_PIN(6, 19)
+#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
+#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
+#define WMT_PIN_SD1WP WMT_PIN(7, 13)
+
+static const struct pinctrl_pin_desc wm8650_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
+ PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
+ PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS0, "spi0_ss0"),
+ PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"),
+ PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"),
+ PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"),
+ PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_UART0RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART3RTS, "uart3_rts"),
+ PINCTRL_PIN(WMT_PIN_UART3TXD, "uart3_txd"),
+ PINCTRL_PIN(WMT_PIN_UART3CTS, "uart3_cts"),
+ PINCTRL_PIN(WMT_PIN_UART3RXD, "uart3_rxd"),
+ PINCTRL_PIN(WMT_PIN_KPADROW0, "kpadrow0"),
+ PINCTRL_PIN(WMT_PIN_KPADROW1, "kpadrow1"),
+ PINCTRL_PIN(WMT_PIN_KPADCOL0, "kpadcol0"),
+ PINCTRL_PIN(WMT_PIN_KPADCOL1, "kpadcol1"),
+ PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"),
+ PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8650_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "susgpio0",
+ "sd0_cd",
+ "sd1_cd",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "i2c1_scl",
+ "i2c1_sda",
+ "spi0_mosi",
+ "spi0_miso",
+ "spi0_ss0",
+ "spi0_clk",
+ "sd0_data0",
+ "sd0_data1",
+ "sd0_data2",
+ "sd0_data3",
+ "sd0_clk",
+ "sd0_wp",
+ "sd0_cmd",
+ "sd1_data0",
+ "sd1_data1",
+ "sd1_data2",
+ "sd1_data3",
+ "sd1_data4",
+ "sd1_data5",
+ "sd1_data6",
+ "sd1_data7",
+ "i2c0_scl",
+ "i2c0_sda",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "uart3_rts",
+ "uart3_txd",
+ "uart3_cts",
+ "uart3_rxd",
+ "kpadrow0",
+ "kpadrow1",
+ "kpadcol0",
+ "kpadcol1",
+ "sd1_clk",
+ "sd1_cmd",
+ "sd1_wp",
+};
+
+static int wm8650_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8650_banks;
+ data->nbanks = ARRAY_SIZE(wm8650_banks);
+ data->pins = wm8650_pins;
+ data->npins = ARRAY_SIZE(wm8650_pins);
+ data->groups = wm8650_groups;
+ data->ngroups = ARRAY_SIZE(wm8650_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8650_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8650-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8650_pinctrl_probe,
+ .remove = wm8650_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8650",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8650 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8750.c b/drivers/pinctrl/vt8500/pinctrl-wm8750.c
new file mode 100644
index 0000000..b964cc5
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8750.c
@@ -0,0 +1,409 @@
+/*
+ * Pinctrl data for Wondermedia WM8750 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8750_banks[] = {
+ WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
+ WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
+ WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
+ WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
+ WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
+ WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
+ WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
+ WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
+ WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */
+ WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */
+ WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 16)
+#define WMT_PIN_SD0CD WMT_PIN(0, 28)
+#define WMT_PIN_VDOUT0 WMT_PIN(1, 0)
+#define WMT_PIN_VDOUT1 WMT_PIN(1, 1)
+#define WMT_PIN_VDOUT2 WMT_PIN(1, 2)
+#define WMT_PIN_VDOUT3 WMT_PIN(1, 3)
+#define WMT_PIN_VDOUT4 WMT_PIN(1, 4)
+#define WMT_PIN_VDOUT5 WMT_PIN(1, 5)
+#define WMT_PIN_VDOUT6 WMT_PIN(1, 6)
+#define WMT_PIN_VDOUT7 WMT_PIN(1, 7)
+#define WMT_PIN_VDOUT8 WMT_PIN(1, 8)
+#define WMT_PIN_VDOUT9 WMT_PIN(1, 9)
+#define WMT_PIN_VDOUT10 WMT_PIN(1, 10)
+#define WMT_PIN_VDOUT11 WMT_PIN(1, 11)
+#define WMT_PIN_VDOUT12 WMT_PIN(1, 12)
+#define WMT_PIN_VDOUT13 WMT_PIN(1, 13)
+#define WMT_PIN_VDOUT14 WMT_PIN(1, 14)
+#define WMT_PIN_VDOUT15 WMT_PIN(1, 15)
+#define WMT_PIN_VDOUT16 WMT_PIN(1, 16)
+#define WMT_PIN_VDOUT17 WMT_PIN(1, 17)
+#define WMT_PIN_VDOUT18 WMT_PIN(1, 18)
+#define WMT_PIN_VDOUT19 WMT_PIN(1, 19)
+#define WMT_PIN_VDOUT20 WMT_PIN(1, 20)
+#define WMT_PIN_VDOUT21 WMT_PIN(1, 21)
+#define WMT_PIN_VDOUT22 WMT_PIN(1, 22)
+#define WMT_PIN_VDOUT23 WMT_PIN(1, 23)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_SPI0_MOSI WMT_PIN(2, 24)
+#define WMT_PIN_SPI0_MISO WMT_PIN(2, 25)
+#define WMT_PIN_SPI0_SS WMT_PIN(2, 26)
+#define WMT_PIN_SPI0_CLK WMT_PIN(2, 27)
+#define WMT_PIN_SPI0_SSB WMT_PIN(2, 28)
+#define WMT_PIN_SD0CLK WMT_PIN(3, 17)
+#define WMT_PIN_SD0CMD WMT_PIN(3, 18)
+#define WMT_PIN_SD0WP WMT_PIN(3, 19)
+#define WMT_PIN_SD0DATA0 WMT_PIN(3, 20)
+#define WMT_PIN_SD0DATA1 WMT_PIN(3, 21)
+#define WMT_PIN_SD0DATA2 WMT_PIN(3, 22)
+#define WMT_PIN_SD0DATA3 WMT_PIN(3, 23)
+#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24)
+#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25)
+#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26)
+#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27)
+#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28)
+#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29)
+#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30)
+#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31)
+#define WMT_PIN_I2C0_SCL WMT_PIN(5, 8)
+#define WMT_PIN_I2C0_SDA WMT_PIN(5, 9)
+#define WMT_PIN_I2C1_SCL WMT_PIN(5, 10)
+#define WMT_PIN_I2C1_SDA WMT_PIN(5, 11)
+#define WMT_PIN_I2C2_SCL WMT_PIN(5, 12)
+#define WMT_PIN_I2C2_SDA WMT_PIN(5, 13)
+#define WMT_PIN_UART0_RTS WMT_PIN(5, 16)
+#define WMT_PIN_UART0_TXD WMT_PIN(5, 17)
+#define WMT_PIN_UART0_CTS WMT_PIN(5, 18)
+#define WMT_PIN_UART0_RXD WMT_PIN(5, 19)
+#define WMT_PIN_UART1_RTS WMT_PIN(5, 20)
+#define WMT_PIN_UART1_TXD WMT_PIN(5, 21)
+#define WMT_PIN_UART1_CTS WMT_PIN(5, 22)
+#define WMT_PIN_UART1_RXD WMT_PIN(5, 23)
+#define WMT_PIN_UART2_RTS WMT_PIN(5, 24)
+#define WMT_PIN_UART2_TXD WMT_PIN(5, 25)
+#define WMT_PIN_UART2_CTS WMT_PIN(5, 26)
+#define WMT_PIN_UART2_RXD WMT_PIN(5, 27)
+#define WMT_PIN_UART3_RTS WMT_PIN(5, 28)
+#define WMT_PIN_UART3_TXD WMT_PIN(5, 29)
+#define WMT_PIN_UART3_CTS WMT_PIN(5, 30)
+#define WMT_PIN_UART3_RXD WMT_PIN(5, 31)
+#define WMT_PIN_SD2CD WMT_PIN(6, 0)
+#define WMT_PIN_SD2DATA3 WMT_PIN(6, 1)
+#define WMT_PIN_SD2DATA0 WMT_PIN(6, 2)
+#define WMT_PIN_SD2WP WMT_PIN(6, 3)
+#define WMT_PIN_SD2DATA1 WMT_PIN(6, 4)
+#define WMT_PIN_SD2DATA2 WMT_PIN(6, 5)
+#define WMT_PIN_SD2CMD WMT_PIN(6, 6)
+#define WMT_PIN_SD2CLK WMT_PIN(6, 7)
+#define WMT_PIN_SD2PWR WMT_PIN(6, 9)
+#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
+#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
+#define WMT_PIN_SD1PWR WMT_PIN(7, 10)
+#define WMT_PIN_SD1WP WMT_PIN(7, 11)
+#define WMT_PIN_SD1CD WMT_PIN(7, 12)
+#define WMT_PIN_SPI0SS3 WMT_PIN(7, 24)
+#define WMT_PIN_SPI0SS2 WMT_PIN(7, 25)
+#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26)
+#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27)
+
+static const struct pinctrl_pin_desc wm8750_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI0_CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SSB, "spi0_ssb"),
+ PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SCL, "i2c2_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SDA, "i2c2_sda"),
+ PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART3_RTS, "uart3_rts"),
+ PINCTRL_PIN(WMT_PIN_UART3_TXD, "uart3_txd"),
+ PINCTRL_PIN(WMT_PIN_UART3_CTS, "uart3_cts"),
+ PINCTRL_PIN(WMT_PIN_UART3_RXD, "uart3_rxd"),
+ PINCTRL_PIN(WMT_PIN_SD2CD, "sd2_cd"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA3, "sd2_data3"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA0, "sd2_data0"),
+ PINCTRL_PIN(WMT_PIN_SD2WP, "sd2_wp"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA1, "sd2_data1"),
+ PINCTRL_PIN(WMT_PIN_SD2DATA2, "sd2_data2"),
+ PINCTRL_PIN(WMT_PIN_SD2CMD, "sd2_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD2CLK, "sd2_clk"),
+ PINCTRL_PIN(WMT_PIN_SD2PWR, "sd2_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"),
+ PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1PWR, "sd1_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"),
+ PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS3, "spi0_ss3"),
+ PINCTRL_PIN(WMT_PIN_SPI0SS2, "spi0_ss2"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT1, "pwmout1"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT0, "pwmout0"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8750_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "sd0_cd",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "spi0_mosi",
+ "spi0_miso",
+ "spi0_ss",
+ "spi0_clk",
+ "spi0_ssb",
+ "sd0_clk",
+ "sd0_cmd",
+ "sd0_wp",
+ "sd0_data0",
+ "sd0_data1",
+ "sd0_data2",
+ "sd0_data3",
+ "sd1_data0",
+ "sd1_data1",
+ "sd1_data2",
+ "sd1_data3",
+ "sd1_data4",
+ "sd1_data5",
+ "sd1_data6",
+ "sd1_data7",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "i2c2_scl",
+ "i2c2_sda",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "uart3_rts",
+ "uart3_txd",
+ "uart3_cts",
+ "uart3_rxd",
+ "sd2_cd",
+ "sd2_data3",
+ "sd2_data0",
+ "sd2_wp",
+ "sd2_data1",
+ "sd2_data2",
+ "sd2_cmd",
+ "sd2_clk",
+ "sd2_pwr",
+ "sd1_clk",
+ "sd1_cmd",
+ "sd1_pwr",
+ "sd1_wp",
+ "sd1_cd",
+ "spi0_ss3",
+ "spi0_ss2",
+ "pwmout1",
+ "pwmout0",
+};
+
+static int wm8750_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8750_banks;
+ data->nbanks = ARRAY_SIZE(wm8750_banks);
+ data->pins = wm8750_pins;
+ data->npins = ARRAY_SIZE(wm8750_pins);
+ data->groups = wm8750_groups;
+ data->ngroups = ARRAY_SIZE(wm8750_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8750_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8750-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8750_pinctrl_probe,
+ .remove = wm8750_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8750",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8750 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8850.c b/drivers/pinctrl/vt8500/pinctrl-wm8850.c
new file mode 100644
index 0000000..ecadce9c
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8850.c
@@ -0,0 +1,388 @@
+/*
+ * Pinctrl data for Wondermedia WM8850 SoC
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+/*
+ * Describe the register offsets within the GPIO memory space
+ * The dedicated external GPIO's should always be listed in bank 0
+ * so they are exported in the 0..31 range which is what users
+ * expect.
+ *
+ * Do not reorder these banks as it will change the pin numbering
+ */
+static const struct wmt_pinctrl_bank_registers wm8850_banks[] = {
+ WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */
+ WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */
+ WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */
+ WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */
+ WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */
+ WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */
+ WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */
+ WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */
+ WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */
+ WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */
+ WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */
+};
+
+/* Please keep sorted by bank/bit */
+#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0)
+#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1)
+#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2)
+#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3)
+#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4)
+#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5)
+#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6)
+#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7)
+#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16)
+#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17)
+#define WMT_PIN_WAKEUP2 WMT_PIN(0, 18)
+#define WMT_PIN_WAKEUP3 WMT_PIN(0, 19)
+#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21)
+#define WMT_PIN_SUSGPIO1 WMT_PIN(0, 22)
+#define WMT_PIN_SD0CD WMT_PIN(0, 28)
+#define WMT_PIN_VDOUT0 WMT_PIN(1, 0)
+#define WMT_PIN_VDOUT1 WMT_PIN(1, 1)
+#define WMT_PIN_VDOUT2 WMT_PIN(1, 2)
+#define WMT_PIN_VDOUT3 WMT_PIN(1, 3)
+#define WMT_PIN_VDOUT4 WMT_PIN(1, 4)
+#define WMT_PIN_VDOUT5 WMT_PIN(1, 5)
+#define WMT_PIN_VDOUT6 WMT_PIN(1, 6)
+#define WMT_PIN_VDOUT7 WMT_PIN(1, 7)
+#define WMT_PIN_VDOUT8 WMT_PIN(1, 8)
+#define WMT_PIN_VDOUT9 WMT_PIN(1, 9)
+#define WMT_PIN_VDOUT10 WMT_PIN(1, 10)
+#define WMT_PIN_VDOUT11 WMT_PIN(1, 11)
+#define WMT_PIN_VDOUT12 WMT_PIN(1, 12)
+#define WMT_PIN_VDOUT13 WMT_PIN(1, 13)
+#define WMT_PIN_VDOUT14 WMT_PIN(1, 14)
+#define WMT_PIN_VDOUT15 WMT_PIN(1, 15)
+#define WMT_PIN_VDOUT16 WMT_PIN(1, 16)
+#define WMT_PIN_VDOUT17 WMT_PIN(1, 17)
+#define WMT_PIN_VDOUT18 WMT_PIN(1, 18)
+#define WMT_PIN_VDOUT19 WMT_PIN(1, 19)
+#define WMT_PIN_VDOUT20 WMT_PIN(1, 20)
+#define WMT_PIN_VDOUT21 WMT_PIN(1, 21)
+#define WMT_PIN_VDOUT22 WMT_PIN(1, 22)
+#define WMT_PIN_VDOUT23 WMT_PIN(1, 23)
+#define WMT_PIN_VDIN0 WMT_PIN(2, 0)
+#define WMT_PIN_VDIN1 WMT_PIN(2, 1)
+#define WMT_PIN_VDIN2 WMT_PIN(2, 2)
+#define WMT_PIN_VDIN3 WMT_PIN(2, 3)
+#define WMT_PIN_VDIN4 WMT_PIN(2, 4)
+#define WMT_PIN_VDIN5 WMT_PIN(2, 5)
+#define WMT_PIN_VDIN6 WMT_PIN(2, 6)
+#define WMT_PIN_VDIN7 WMT_PIN(2, 7)
+#define WMT_PIN_SPI0_MOSI WMT_PIN(2, 24)
+#define WMT_PIN_SPI0_MISO WMT_PIN(2, 25)
+#define WMT_PIN_SPI0_SS WMT_PIN(2, 26)
+#define WMT_PIN_SPI0_CLK WMT_PIN(2, 27)
+#define WMT_PIN_SPI0_SSB WMT_PIN(2, 28)
+#define WMT_PIN_SD0CLK WMT_PIN(3, 17)
+#define WMT_PIN_SD0CMD WMT_PIN(3, 18)
+#define WMT_PIN_SD0WP WMT_PIN(3, 19)
+#define WMT_PIN_SD0DATA0 WMT_PIN(3, 20)
+#define WMT_PIN_SD0DATA1 WMT_PIN(3, 21)
+#define WMT_PIN_SD0DATA2 WMT_PIN(3, 22)
+#define WMT_PIN_SD0DATA3 WMT_PIN(3, 23)
+#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24)
+#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25)
+#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26)
+#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27)
+#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28)
+#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29)
+#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30)
+#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31)
+#define WMT_PIN_I2C0_SCL WMT_PIN(5, 8)
+#define WMT_PIN_I2C0_SDA WMT_PIN(5, 9)
+#define WMT_PIN_I2C1_SCL WMT_PIN(5, 10)
+#define WMT_PIN_I2C1_SDA WMT_PIN(5, 11)
+#define WMT_PIN_I2C2_SCL WMT_PIN(5, 12)
+#define WMT_PIN_I2C2_SDA WMT_PIN(5, 13)
+#define WMT_PIN_UART0_RTS WMT_PIN(5, 16)
+#define WMT_PIN_UART0_TXD WMT_PIN(5, 17)
+#define WMT_PIN_UART0_CTS WMT_PIN(5, 18)
+#define WMT_PIN_UART0_RXD WMT_PIN(5, 19)
+#define WMT_PIN_UART1_RTS WMT_PIN(5, 20)
+#define WMT_PIN_UART1_TXD WMT_PIN(5, 21)
+#define WMT_PIN_UART1_CTS WMT_PIN(5, 22)
+#define WMT_PIN_UART1_RXD WMT_PIN(5, 23)
+#define WMT_PIN_UART2_RTS WMT_PIN(5, 24)
+#define WMT_PIN_UART2_TXD WMT_PIN(5, 25)
+#define WMT_PIN_UART2_CTS WMT_PIN(5, 26)
+#define WMT_PIN_UART2_RXD WMT_PIN(5, 27)
+#define WMT_PIN_SD2WP WMT_PIN(6, 3)
+#define WMT_PIN_SD2CMD WMT_PIN(6, 6)
+#define WMT_PIN_SD2CLK WMT_PIN(6, 7)
+#define WMT_PIN_SD2PWR WMT_PIN(6, 9)
+#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
+#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
+#define WMT_PIN_SD1PWR WMT_PIN(7, 10)
+#define WMT_PIN_SD1WP WMT_PIN(7, 11)
+#define WMT_PIN_SD1CD WMT_PIN(7, 12)
+#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26)
+#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27)
+
+static const struct pinctrl_pin_desc wm8850_pins[] = {
+ PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
+ PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"),
+ PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
+ PINCTRL_PIN(WMT_PIN_SUSGPIO1, "susgpio1"),
+ PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
+ PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
+ PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
+ PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
+ PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
+ PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
+ PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"),
+ PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"),
+ PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"),
+ PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"),
+ PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"),
+ PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"),
+ PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"),
+ PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"),
+ PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"),
+ PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"),
+ PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"),
+ PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"),
+ PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"),
+ PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"),
+ PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"),
+ PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"),
+ PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"),
+ PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"),
+ PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"),
+ PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"),
+ PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"),
+ PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"),
+ PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"),
+ PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"),
+ PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"),
+ PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"),
+ PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MOSI, "spi0_mosi"),
+ PINCTRL_PIN(WMT_PIN_SPI0_MISO, "spi0_miso"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SS, "spi0_ss"),
+ PINCTRL_PIN(WMT_PIN_SPI0_CLK, "spi0_clk"),
+ PINCTRL_PIN(WMT_PIN_SPI0_SSB, "spi0_ssb"),
+ PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"),
+ PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"),
+ PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"),
+ PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SCL, "i2c0_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C0_SDA, "i2c0_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SCL, "i2c1_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C1_SDA, "i2c1_sda"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SCL, "i2c2_scl"),
+ PINCTRL_PIN(WMT_PIN_I2C2_SDA, "i2c2_sda"),
+ PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"),
+ PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"),
+ PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"),
+ PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"),
+ PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"),
+ PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"),
+ PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"),
+ PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"),
+ PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"),
+ PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"),
+ PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"),
+ PINCTRL_PIN(WMT_PIN_SD2WP, "sd2_wp"),
+ PINCTRL_PIN(WMT_PIN_SD2CMD, "sd2_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD2CLK, "sd2_clk"),
+ PINCTRL_PIN(WMT_PIN_SD2PWR, "sd2_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"),
+ PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"),
+ PINCTRL_PIN(WMT_PIN_SD1PWR, "sd1_pwr"),
+ PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"),
+ PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT1, "pwmout1"),
+ PINCTRL_PIN(WMT_PIN_PWMOUT0, "pwmout0"),
+};
+
+/* Order of these names must match the above list */
+static const char * const wm8850_groups[] = {
+ "extgpio0",
+ "extgpio1",
+ "extgpio2",
+ "extgpio3",
+ "extgpio4",
+ "extgpio5",
+ "extgpio6",
+ "extgpio7",
+ "wakeup0",
+ "wakeup1",
+ "wakeup2",
+ "wakeup3",
+ "susgpio0",
+ "susgpio1",
+ "sd0_cd",
+ "vdout0",
+ "vdout1",
+ "vdout2",
+ "vdout3",
+ "vdout4",
+ "vdout5",
+ "vdout6",
+ "vdout7",
+ "vdout8",
+ "vdout9",
+ "vdout10",
+ "vdout11",
+ "vdout12",
+ "vdout13",
+ "vdout14",
+ "vdout15",
+ "vdout16",
+ "vdout17",
+ "vdout18",
+ "vdout19",
+ "vdout20",
+ "vdout21",
+ "vdout22",
+ "vdout23",
+ "vdin0",
+ "vdin1",
+ "vdin2",
+ "vdin3",
+ "vdin4",
+ "vdin5",
+ "vdin6",
+ "vdin7",
+ "spi0_mosi",
+ "spi0_miso",
+ "spi0_ss",
+ "spi0_clk",
+ "spi0_ssb",
+ "sd0_clk",
+ "sd0_cmd",
+ "sd0_wp",
+ "sd0_data0",
+ "sd0_data1",
+ "sd0_data2",
+ "sd0_data3",
+ "sd1_data0",
+ "sd1_data1",
+ "sd1_data2",
+ "sd1_data3",
+ "sd1_data4",
+ "sd1_data5",
+ "sd1_data6",
+ "sd1_data7",
+ "i2c0_scl",
+ "i2c0_sda",
+ "i2c1_scl",
+ "i2c1_sda",
+ "i2c2_scl",
+ "i2c2_sda",
+ "uart0_rts",
+ "uart0_txd",
+ "uart0_cts",
+ "uart0_rxd",
+ "uart1_rts",
+ "uart1_txd",
+ "uart1_cts",
+ "uart1_rxd",
+ "uart2_rts",
+ "uart2_txd",
+ "uart2_cts",
+ "uart2_rxd",
+ "sd2_wp",
+ "sd2_cmd",
+ "sd2_clk",
+ "sd2_pwr",
+ "sd1_clk",
+ "sd1_cmd",
+ "sd1_pwr",
+ "sd1_wp",
+ "sd1_cd",
+ "pwmout1",
+ "pwmout0",
+};
+
+static int wm8850_pinctrl_probe(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate data\n");
+ return -ENOMEM;
+ }
+
+ data->banks = wm8850_banks;
+ data->nbanks = ARRAY_SIZE(wm8850_banks);
+ data->pins = wm8850_pins;
+ data->npins = ARRAY_SIZE(wm8850_pins);
+ data->groups = wm8850_groups;
+ data->ngroups = ARRAY_SIZE(wm8850_groups);
+
+ return wmt_pinctrl_probe(pdev, data);
+}
+
+static int wm8850_pinctrl_remove(struct platform_device *pdev)
+{
+ return wmt_pinctrl_remove(pdev);
+}
+
+static struct of_device_id wmt_pinctrl_of_match[] = {
+ { .compatible = "wm,wm8850-pinctrl" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver wmt_pinctrl_driver = {
+ .probe = wm8850_pinctrl_probe,
+ .remove = wm8850_pinctrl_remove,
+ .driver = {
+ .name = "pinctrl-wm8850",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_pinctrl_of_match,
+ },
+};
+
+module_platform_driver(wmt_pinctrl_driver);
+
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_DESCRIPTION("Wondermedia WM8850 Pincontrol driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c
new file mode 100644
index 0000000..9736d27
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
@@ -0,0 +1,620 @@
+/*
+ * Pinctrl driver for the Wondermedia SoC's
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "pinctrl-wmt.h"
+
+static inline void wmt_setbits(struct wmt_pinctrl_data *data, u32 reg,
+ u32 mask)
+{
+ u32 val;
+
+ val = readl_relaxed(data->base + reg);
+ val |= mask;
+ writel_relaxed(val, data->base + reg);
+}
+
+static inline void wmt_clearbits(struct wmt_pinctrl_data *data, u32 reg,
+ u32 mask)
+{
+ u32 val;
+
+ val = readl_relaxed(data->base + reg);
+ val &= ~mask;
+ writel_relaxed(val, data->base + reg);
+}
+
+enum wmt_func_sel {
+ WMT_FSEL_GPIO_IN = 0,
+ WMT_FSEL_GPIO_OUT = 1,
+ WMT_FSEL_ALT = 2,
+ WMT_FSEL_COUNT = 3,
+};
+
+static const char * const wmt_functions[WMT_FSEL_COUNT] = {
+ [WMT_FSEL_GPIO_IN] = "gpio_in",
+ [WMT_FSEL_GPIO_OUT] = "gpio_out",
+ [WMT_FSEL_ALT] = "alt",
+};
+
+static int wmt_pmx_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ return WMT_FSEL_COUNT;
+}
+
+static const char *wmt_pmx_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ return wmt_functions[selector];
+}
+
+static int wmt_pmx_get_function_groups(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ /* every pin does every function */
+ *groups = data->groups;
+ *num_groups = data->ngroups;
+
+ return 0;
+}
+
+static int wmt_set_pinmux(struct wmt_pinctrl_data *data, unsigned func,
+ unsigned pin)
+{
+ u32 bank = WMT_BANK_FROM_PIN(pin);
+ u32 bit = WMT_BIT_FROM_PIN(pin);
+ u32 reg_en = data->banks[bank].reg_en;
+ u32 reg_dir = data->banks[bank].reg_dir;
+
+ if (reg_dir == NO_REG) {
+ dev_err(data->dev, "pin:%d no direction register defined\n",
+ pin);
+ return -EINVAL;
+ }
+
+ /*
+ * If reg_en == NO_REG, we assume it is a dedicated GPIO and cannot be
+ * disabled (as on VT8500) and that no alternate function is available.
+ */
+ switch (func) {
+ case WMT_FSEL_GPIO_IN:
+ if (reg_en != NO_REG)
+ wmt_setbits(data, reg_en, BIT(bit));
+ wmt_clearbits(data, reg_dir, BIT(bit));
+ break;
+ case WMT_FSEL_GPIO_OUT:
+ if (reg_en != NO_REG)
+ wmt_setbits(data, reg_en, BIT(bit));
+ wmt_setbits(data, reg_dir, BIT(bit));
+ break;
+ case WMT_FSEL_ALT:
+ if (reg_en == NO_REG) {
+ dev_err(data->dev, "pin:%d no alt function available\n",
+ pin);
+ return -EINVAL;
+ }
+ wmt_clearbits(data, reg_en, BIT(bit));
+ }
+
+ return 0;
+}
+
+static int wmt_pmx_enable(struct pinctrl_dev *pctldev,
+ unsigned func_selector,
+ unsigned group_selector)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+ u32 pinnum = data->pins[group_selector].number;
+
+ return wmt_set_pinmux(data, func_selector, pinnum);
+}
+
+static void wmt_pmx_disable(struct pinctrl_dev *pctldev,
+ unsigned func_selector,
+ unsigned group_selector)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+ u32 pinnum = data->pins[group_selector].number;
+
+ /* disable by setting GPIO_IN */
+ wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, pinnum);
+}
+
+static void wmt_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable by setting GPIO_IN */
+ wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, offset);
+}
+
+static int wmt_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset,
+ bool input)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ wmt_set_pinmux(data, (input ? WMT_FSEL_GPIO_IN : WMT_FSEL_GPIO_OUT),
+ offset);
+
+ return 0;
+}
+
+static struct pinmux_ops wmt_pinmux_ops = {
+ .get_functions_count = wmt_pmx_get_functions_count,
+ .get_function_name = wmt_pmx_get_function_name,
+ .get_function_groups = wmt_pmx_get_function_groups,
+ .enable = wmt_pmx_enable,
+ .disable = wmt_pmx_disable,
+ .gpio_disable_free = wmt_pmx_gpio_disable_free,
+ .gpio_set_direction = wmt_pmx_gpio_set_direction,
+};
+
+static int wmt_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ return data->ngroups;
+}
+
+static const char *wmt_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ return data->groups[selector];
+}
+
+static int wmt_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = &data->pins[selector].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static int wmt_pctl_find_group_by_pin(struct wmt_pinctrl_data *data, u32 pin)
+{
+ int i;
+
+ for (i = 0; i < data->npins; i++) {
+ if (data->pins[i].number == pin)
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int wmt_pctl_dt_node_to_map_func(struct wmt_pinctrl_data *data,
+ struct device_node *np,
+ u32 pin, u32 fnum,
+ struct pinctrl_map **maps)
+{
+ int group;
+ struct pinctrl_map *map = *maps;
+
+ if (fnum >= ARRAY_SIZE(wmt_functions)) {
+ dev_err(data->dev, "invalid wm,function %d\n", fnum);
+ return -EINVAL;
+ }
+
+ group = wmt_pctl_find_group_by_pin(data, pin);
+ if (group < 0) {
+ dev_err(data->dev, "unable to match pin %d to group\n", pin);
+ return group;
+ }
+
+ map->type = PIN_MAP_TYPE_MUX_GROUP;
+ map->data.mux.group = data->groups[group];
+ map->data.mux.function = wmt_functions[fnum];
+ (*maps)++;
+
+ return 0;
+}
+
+static int wmt_pctl_dt_node_to_map_pull(struct wmt_pinctrl_data *data,
+ struct device_node *np,
+ u32 pin, u32 pull,
+ struct pinctrl_map **maps)
+{
+ int group;
+ unsigned long *configs;
+ struct pinctrl_map *map = *maps;
+
+ if (pull > 2) {
+ dev_err(data->dev, "invalid wm,pull %d\n", pull);
+ return -EINVAL;
+ }
+
+ group = wmt_pctl_find_group_by_pin(data, pin);
+ if (group < 0) {
+ dev_err(data->dev, "unable to match pin %d to group\n", pin);
+ return group;
+ }
+
+ configs = devm_kzalloc(data->dev, sizeof(*configs), GFP_KERNEL);
+ if (!configs)
+ return -ENOMEM;
+
+ configs[0] = pull;
+
+ map->type = PIN_MAP_TYPE_CONFIGS_PIN;
+ map->data.configs.group_or_pin = data->groups[group];
+ map->data.configs.configs = configs;
+ map->data.configs.num_configs = 1;
+ (*maps)++;
+
+ return 0;
+}
+
+static int wmt_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map,
+ unsigned *num_maps)
+{
+ struct pinctrl_map *maps, *cur_map;
+ struct property *pins, *funcs, *pulls;
+ u32 pin, func, pull;
+ int num_pins, num_funcs, num_pulls, maps_per_pin;
+ int i, err;
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+
+ pins = of_find_property(np, "wm,pins", NULL);
+ if (!pins) {
+ dev_err(data->dev, "missing wmt,pins property\n");
+ return -EINVAL;
+ }
+
+ funcs = of_find_property(np, "wm,function", NULL);
+ pulls = of_find_property(np, "wm,pull", NULL);
+
+ if (!funcs && !pulls) {
+ dev_err(data->dev, "neither wm,function nor wm,pull specified\n");
+ return -EINVAL;
+ }
+
+ /*
+ * The following lines calculate how many values are defined for each
+ * of the properties.
+ */
+ num_pins = pins->length / sizeof(u32);
+ num_funcs = funcs ? (funcs->length / sizeof(u32)) : 0;
+ num_pulls = pulls ? (pulls->length / sizeof(u32)) : 0;
+
+ if (num_funcs > 1 && num_funcs != num_pins) {
+ dev_err(data->dev, "wm,function must have 1 or %d entries\n",
+ num_pins);
+ return -EINVAL;
+ }
+
+ if (num_pulls > 1 && num_pulls != num_pins) {
+ dev_err(data->dev, "wm,pull must have 1 or %d entries\n",
+ num_pins);
+ return -EINVAL;
+ }
+
+ maps_per_pin = 0;
+ if (num_funcs)
+ maps_per_pin++;
+ if (num_pulls)
+ maps_per_pin++;
+
+ cur_map = maps = devm_kzalloc(data->dev,
+ num_pins * maps_per_pin * sizeof(*maps),
+ GFP_KERNEL);
+ if (!maps)
+ return -ENOMEM;
+
+ for (i = 0; i < num_pins; i++) {
+ err = of_property_read_u32_index(np, "wm,pins", i, &pin);
+ if (err)
+ return err;
+
+ if (pin >= (data->nbanks * 32)) {
+ dev_err(data->dev, "invalid wm,pins value\n");
+ return -EINVAL;
+ }
+
+ if (num_funcs) {
+ err = of_property_read_u32_index(np, "wm,function",
+ (num_funcs > 1 ? i : 0), &func);
+ if (err)
+ return err;
+
+ err = wmt_pctl_dt_node_to_map_func(data, np, pin, func,
+ &cur_map);
+ if (err)
+ return err;
+ }
+
+ if (num_pulls) {
+ err = of_property_read_u32_index(np, "wm,pull",
+ (num_pulls > 1 ? i : 0), &pull);
+ if (err)
+ return err;
+
+ err = wmt_pctl_dt_node_to_map_pull(data, np, pin, pull,
+ &cur_map);
+ if (err)
+ return err;
+ }
+ }
+ *map = maps;
+ *num_maps = num_pins * maps_per_pin;
+ return 0;
+}
+
+static void wmt_pctl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *maps,
+ unsigned num_maps)
+{
+ int i;
+
+ for (i = 0; i < num_maps; i++)
+ if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+ kfree(maps[i].data.configs.configs);
+
+ kfree(maps);
+}
+
+static struct pinctrl_ops wmt_pctl_ops = {
+ .get_groups_count = wmt_get_groups_count,
+ .get_group_name = wmt_get_group_name,
+ .get_group_pins = wmt_get_group_pins,
+ .dt_node_to_map = wmt_pctl_dt_node_to_map,
+ .dt_free_map = wmt_pctl_dt_free_map,
+};
+
+static int wmt_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long *config)
+{
+ return -ENOTSUPP;
+}
+
+static int wmt_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long config)
+{
+ struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
+ enum pin_config_param param = pinconf_to_config_param(config);
+ u16 arg = pinconf_to_config_argument(config);
+ u32 bank = WMT_BANK_FROM_PIN(pin);
+ u32 bit = WMT_BIT_FROM_PIN(pin);
+ u32 reg_pull_en = data->banks[bank].reg_pull_en;
+ u32 reg_pull_cfg = data->banks[bank].reg_pull_cfg;
+
+ if ((reg_pull_en == NO_REG) || (reg_pull_cfg == NO_REG)) {
+ dev_err(data->dev, "bias functions not supported on pin %d\n",
+ pin);
+ return -EINVAL;
+ }
+
+ if ((param == PIN_CONFIG_BIAS_PULL_DOWN) ||
+ (param == PIN_CONFIG_BIAS_PULL_UP)) {
+ if (arg == 0)
+ param = PIN_CONFIG_BIAS_DISABLE;
+ }
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ wmt_clearbits(data, reg_pull_en, BIT(bit));
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ wmt_clearbits(data, reg_pull_cfg, BIT(bit));
+ wmt_setbits(data, reg_pull_en, BIT(bit));
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ wmt_setbits(data, reg_pull_cfg, BIT(bit));
+ wmt_setbits(data, reg_pull_en, BIT(bit));
+ break;
+ default:
+ dev_err(data->dev, "unknown pinconf param\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct pinconf_ops wmt_pinconf_ops = {
+ .pin_config_get = wmt_pinconf_get,
+ .pin_config_set = wmt_pinconf_set,
+};
+
+static struct pinctrl_desc wmt_desc = {
+ .owner = THIS_MODULE,
+ .name = "pinctrl-wmt",
+ .pctlops = &wmt_pctl_ops,
+ .pmxops = &wmt_pinmux_ops,
+ .confops = &wmt_pinconf_ops,
+};
+
+static int wmt_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_request_gpio(chip->base + offset);
+}
+
+static void wmt_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(chip->base + offset);
+}
+
+static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+ struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
+ u32 bank = WMT_BANK_FROM_PIN(offset);
+ u32 bit = WMT_BIT_FROM_PIN(offset);
+ u32 reg_dir = data->banks[bank].reg_dir;
+ u32 val;
+
+ val = readl_relaxed(data->base + reg_dir);
+ if (val & BIT(bit))
+ return GPIOF_DIR_OUT;
+ else
+ return GPIOF_DIR_IN;
+}
+
+static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int wmt_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
+static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
+ u32 bank = WMT_BANK_FROM_PIN(offset);
+ u32 bit = WMT_BIT_FROM_PIN(offset);
+ u32 reg_data_in = data->banks[bank].reg_data_in;
+
+ if (reg_data_in == NO_REG) {
+ dev_err(data->dev, "no data in register defined\n");
+ return -EINVAL;
+ }
+
+ return !!(readl_relaxed(data->base + reg_data_in) & BIT(bit));
+}
+
+static void wmt_gpio_set_value(struct gpio_chip *chip, unsigned offset,
+ int val)
+{
+ struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev);
+ u32 bank = WMT_BANK_FROM_PIN(offset);
+ u32 bit = WMT_BIT_FROM_PIN(offset);
+ u32 reg_data_out = data->banks[bank].reg_data_out;
+
+ if (reg_data_out == NO_REG) {
+ dev_err(data->dev, "no data out register defined\n");
+ return;
+ }
+
+ if (val)
+ wmt_setbits(data, reg_data_out, BIT(bit));
+ else
+ wmt_clearbits(data, reg_data_out, BIT(bit));
+}
+
+static struct gpio_chip wmt_gpio_chip = {
+ .label = "gpio-wmt",
+ .owner = THIS_MODULE,
+ .request = wmt_gpio_request,
+ .free = wmt_gpio_free,
+ .get_direction = wmt_gpio_get_direction,
+ .direction_input = wmt_gpio_direction_input,
+ .direction_output = wmt_gpio_direction_output,
+ .get = wmt_gpio_get_value,
+ .set = wmt_gpio_set_value,
+ .can_sleep = 0,
+};
+
+int wmt_pinctrl_probe(struct platform_device *pdev,
+ struct wmt_pinctrl_data *data)
+{
+ int err;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!data->base) {
+ dev_err(&pdev->dev, "failed to map memory resource\n");
+ return -EBUSY;
+ }
+
+ wmt_desc.pins = data->pins;
+ wmt_desc.npins = data->npins;
+
+ data->gpio_chip = wmt_gpio_chip;
+ data->gpio_chip.dev = &pdev->dev;
+ data->gpio_chip.of_node = pdev->dev.of_node;
+ data->gpio_chip.ngpio = data->nbanks * 32;
+
+ platform_set_drvdata(pdev, data);
+
+ data->dev = &pdev->dev;
+
+ data->pctl_dev = pinctrl_register(&wmt_desc, &pdev->dev, data);
+ if (IS_ERR(data->pctl_dev)) {
+ dev_err(&pdev->dev, "Failed to register pinctrl\n");
+ return -EINVAL;
+ }
+
+ err = gpiochip_add(&data->gpio_chip);
+ if (err) {
+ dev_err(&pdev->dev, "could not add GPIO chip\n");
+ goto fail_gpio;
+ }
+
+ err = gpiochip_add_pin_range(&data->gpio_chip, dev_name(data->dev),
+ 0, 0, data->nbanks * 32);
+ if (err)
+ goto fail_range;
+
+ dev_info(&pdev->dev, "Pin controller initialized\n");
+
+ return 0;
+
+fail_range:
+ err = gpiochip_remove(&data->gpio_chip);
+ if (err)
+ dev_err(&pdev->dev, "failed to remove gpio chip\n");
+fail_gpio:
+ pinctrl_unregister(data->pctl_dev);
+ return err;
+}
+
+int wmt_pinctrl_remove(struct platform_device *pdev)
+{
+ struct wmt_pinctrl_data *data = platform_get_drvdata(pdev);
+ int err;
+
+ err = gpiochip_remove(&data->gpio_chip);
+ if (err)
+ dev_err(&pdev->dev, "failed to remove gpio chip\n");
+
+ pinctrl_unregister(data->pctl_dev);
+
+ return 0;
+}
diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.h b/drivers/pinctrl/vt8500/pinctrl-wmt.h
new file mode 100644
index 0000000..41f5f2d
--- /dev/null
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.h
@@ -0,0 +1,79 @@
+/*
+ * Pinctrl driver for the Wondermedia SoC's
+ *
+ * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/gpio.h>
+
+/* VT8500 has no enable register in the extgpio bank. */
+#define NO_REG 0xFFFF
+
+#define WMT_PINCTRL_BANK(__en, __dir, __dout, __din, __pen, __pcfg) \
+{ \
+ .reg_en = __en, \
+ .reg_dir = __dir, \
+ .reg_data_out = __dout, \
+ .reg_data_in = __din, \
+ .reg_pull_en = __pen, \
+ .reg_pull_cfg = __pcfg, \
+}
+
+/* Encode/decode the bank/bit pairs into a pin value */
+#define WMT_PIN(__bank, __offset) ((__bank << 5) | __offset)
+#define WMT_BANK_FROM_PIN(__pin) (__pin >> 5)
+#define WMT_BIT_FROM_PIN(__pin) (__pin & 0x1f)
+
+#define WMT_GROUP(__name, __data) \
+{ \
+ .name = __name, \
+ .pins = __data, \
+ .npins = ARRAY_SIZE(__data), \
+}
+
+struct wmt_pinctrl_bank_registers {
+ u32 reg_en;
+ u32 reg_dir;
+ u32 reg_data_out;
+ u32 reg_data_in;
+
+ u32 reg_pull_en;
+ u32 reg_pull_cfg;
+};
+
+struct wmt_pinctrl_group {
+ const char *name;
+ const unsigned int *pins;
+ const unsigned npins;
+};
+
+struct wmt_pinctrl_data {
+ struct device *dev;
+ struct pinctrl_dev *pctl_dev;
+
+ /* must be initialized before calling wmt_pinctrl_probe */
+ void __iomem *base;
+ const struct wmt_pinctrl_bank_registers *banks;
+ const struct pinctrl_pin_desc *pins;
+ const char * const *groups;
+
+ u32 nbanks;
+ u32 npins;
+ u32 ngroups;
+
+ struct gpio_chip gpio_chip;
+ struct pinctrl_gpio_range gpio_range;
+};
+
+int wmt_pinctrl_probe(struct platform_device *pdev,
+ struct wmt_pinctrl_data *data);
+int wmt_pinctrl_remove(struct platform_device *pdev);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 4/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver
2013-04-02 4:40 ` Tony Prisk
@ 2013-04-02 4:40 ` Tony Prisk
-1 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:40 UTC (permalink / raw)
To: linus.walleij
Cc: swarren, linux-arm-kernel, vt8500-wm8505-linux-kernel,
linux-kernel, Tony Prisk
This patch adds pinctrl nodes to the VIA VT8500 and Wondermedia SoC dtsi
files to support the pinctrl driver.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/boot/dts/vt8500.dtsi | 9 +++++++++
arch/arm/boot/dts/wm8505.dtsi | 9 +++++++++
arch/arm/boot/dts/wm8650.dtsi | 9 +++++++++
arch/arm/boot/dts/wm8850.dtsi | 9 +++++++++
4 files changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index cf31ced..8e87aa9 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -32,6 +32,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl@d8110000 {
+ compatible = "via,vt8500-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index e74a1c0..e4f768a 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -47,6 +47,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8505-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index db3c0a1..01b6a8d 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -41,6 +41,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8650-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index e8cbfdc..297aa05 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -48,6 +48,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8850-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 4/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver
@ 2013-04-02 4:40 ` Tony Prisk
0 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:40 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds pinctrl nodes to the VIA VT8500 and Wondermedia SoC dtsi
files to support the pinctrl driver.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/boot/dts/vt8500.dtsi | 9 +++++++++
arch/arm/boot/dts/wm8505.dtsi | 9 +++++++++
arch/arm/boot/dts/wm8650.dtsi | 9 +++++++++
arch/arm/boot/dts/wm8850.dtsi | 9 +++++++++
4 files changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index cf31ced..8e87aa9 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -32,6 +32,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "via,vt8500-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index e74a1c0..e4f768a 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -47,6 +47,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "wm,wm8505-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index db3c0a1..01b6a8d 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -41,6 +41,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "wm,wm8650-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index e8cbfdc..297aa05 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -48,6 +48,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "wm,wm8850-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 5/6] arm: vt8500: Remove gpio devicetree nodes
2013-04-02 4:40 ` Tony Prisk
@ 2013-04-02 4:41 ` Tony Prisk
-1 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:41 UTC (permalink / raw)
To: linus.walleij
Cc: swarren, linux-arm-kernel, vt8500-wm8505-linux-kernel,
linux-kernel, Tony Prisk
Remove the gpio related devicetree nodes as these are no longer required
with the move to a combined pinctrl/gpio driver.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/boot/dts/vt8500.dtsi | 7 -------
arch/arm/boot/dts/wm8505.dtsi | 7 -------
arch/arm/boot/dts/wm8650.dtsi | 7 -------
arch/arm/boot/dts/wm8850.dtsi | 7 -------
4 files changed, 28 deletions(-)
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index 8e87aa9..e1c3926 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -25,13 +25,6 @@
#interrupt-cells = <1>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "via,vt8500-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
pinctrl: pinctrl@d8110000 {
compatible = "via,vt8500-pinctrl";
reg = <0xd8110000 0x10000>;
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index e4f768a..bb92ef8 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -40,13 +40,6 @@
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "wm,wm8505-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
pinctrl: pinctrl@d8110000 {
compatible = "wm,wm8505-pinctrl";
reg = <0xd8110000 0x10000>;
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index 01b6a8d..bb4af58 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -34,13 +34,6 @@
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "wm,wm8650-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
pinctrl: pinctrl@d8110000 {
compatible = "wm,wm8650-pinctrl";
reg = <0xd8110000 0x10000>;
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index 297aa05..11cd180 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -41,13 +41,6 @@
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "wm,wm8650-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
pinctrl: pinctrl@d8110000 {
compatible = "wm,wm8850-pinctrl";
reg = <0xd8110000 0x10000>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 5/6] arm: vt8500: Remove gpio devicetree nodes
@ 2013-04-02 4:41 ` Tony Prisk
0 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:41 UTC (permalink / raw)
To: linux-arm-kernel
Remove the gpio related devicetree nodes as these are no longer required
with the move to a combined pinctrl/gpio driver.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/boot/dts/vt8500.dtsi | 7 -------
arch/arm/boot/dts/wm8505.dtsi | 7 -------
arch/arm/boot/dts/wm8650.dtsi | 7 -------
arch/arm/boot/dts/wm8850.dtsi | 7 -------
4 files changed, 28 deletions(-)
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index 8e87aa9..e1c3926 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -25,13 +25,6 @@
#interrupt-cells = <1>;
};
- gpio: gpio-controller at d8110000 {
- compatible = "via,vt8500-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
pinctrl: pinctrl at d8110000 {
compatible = "via,vt8500-pinctrl";
reg = <0xd8110000 0x10000>;
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index e4f768a..bb92ef8 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -40,13 +40,6 @@
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller at d8110000 {
- compatible = "wm,wm8505-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
pinctrl: pinctrl at d8110000 {
compatible = "wm,wm8505-pinctrl";
reg = <0xd8110000 0x10000>;
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index 01b6a8d..bb4af58 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -34,13 +34,6 @@
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller at d8110000 {
- compatible = "wm,wm8650-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
pinctrl: pinctrl at d8110000 {
compatible = "wm,wm8650-pinctrl";
reg = <0xd8110000 0x10000>;
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index 297aa05..11cd180 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -41,13 +41,6 @@
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller at d8110000 {
- compatible = "wm,wm8650-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
pinctrl: pinctrl at d8110000 {
compatible = "wm,wm8850-pinctrl";
reg = <0xd8110000 0x10000>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 6/6] gpio: vt8500: Remove arch-vt8500 gpio driver
2013-04-02 4:40 ` Tony Prisk
@ 2013-04-02 4:41 ` Tony Prisk
-1 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:41 UTC (permalink / raw)
To: linus.walleij
Cc: swarren, linux-arm-kernel, vt8500-wm8505-linux-kernel,
linux-kernel, Tony Prisk
With the move to a combined pinctrl/gpio driver, the arch-vt8500
gpio driver is no longer required.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
.../devicetree/bindings/gpio/gpio-vt8500.txt | 24 --
drivers/gpio/Kconfig | 6 -
drivers/gpio/Makefile | 1 -
drivers/gpio/gpio-vt8500.c | 355 --------------------
4 files changed, 386 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
delete mode 100644 drivers/gpio/gpio-vt8500.c
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
deleted file mode 100644
index f4dc523..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-VIA/Wondermedia VT8500 GPIO Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-gpio", "wm,wm8505-gpio"
- or "wm,wm8650-gpio" depending on your SoC
-- reg : Should contain 1 register range (address and length)
-- #gpio-cells : should be <3>.
- 1) bank
- 2) pin number
- 3) flags - should be 0
-
-Example:
-
- gpio: gpio-controller@d8110000 {
- compatible = "via,vt8500-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
- vibrate {
- gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */
- };
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 93aaadf..b166e30 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -227,12 +227,6 @@ config GPIO_TS5500
blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
LCD port.
-config GPIO_VT8500
- bool "VIA/Wondermedia SoC GPIO Support"
- depends on ARCH_VT8500
- help
- Say yes here to support the VT8500/WM8505/WM8650 GPIO controller.
-
config GPIO_XILINX
bool "Xilinx GPIO support"
depends on PPC_OF || MICROBLAZE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 22e07bc..a274d7d 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -80,7 +80,6 @@ obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o
obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o
-obj-$(CONFIG_GPIO_VT8500) += gpio-vt8500.o
obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c
deleted file mode 100644
index 81683ca..0000000
--- a/drivers/gpio/gpio-vt8500.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/* drivers/gpio/gpio-vt8500.c
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- * Based on arch/arm/mach-vt8500/gpio.c:
- * - Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/bitops.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_device.h>
-
-/*
- We handle GPIOs by bank, each bank containing up to 32 GPIOs covered
- by one set of registers (although not all may be valid).
-
- Because different SoC's have different register offsets, we pass the
- register offsets as data in vt8500_gpio_dt_ids[].
-
- A value of NO_REG is used to indicate that this register is not
- supported. Only used for ->en at the moment.
-*/
-
-#define NO_REG 0xFFFF
-
-/*
- * struct vt8500_gpio_bank_regoffsets
- * @en: offset to enable register of the bank
- * @dir: offset to direction register of the bank
- * @data_out: offset to the data out register of the bank
- * @data_in: offset to the data in register of the bank
- * @ngpio: highest valid pin in this bank
- */
-
-struct vt8500_gpio_bank_regoffsets {
- unsigned int en;
- unsigned int dir;
- unsigned int data_out;
- unsigned int data_in;
- unsigned char ngpio;
-};
-
-struct vt8500_gpio_data {
- unsigned int num_banks;
- struct vt8500_gpio_bank_regoffsets banks[];
-};
-
-#define VT8500_BANK(__en, __dir, __out, __in, __ngpio) \
-{ \
- .en = __en, \
- .dir = __dir, \
- .data_out = __out, \
- .data_in = __in, \
- .ngpio = __ngpio, \
-}
-
-static struct vt8500_gpio_data vt8500_data = {
- .num_banks = 7,
- .banks = {
- VT8500_BANK(NO_REG, 0x3C, 0x5C, 0x7C, 9),
- VT8500_BANK(0x00, 0x20, 0x40, 0x60, 26),
- VT8500_BANK(0x04, 0x24, 0x44, 0x64, 28),
- VT8500_BANK(0x08, 0x28, 0x48, 0x68, 31),
- VT8500_BANK(0x0C, 0x2C, 0x4C, 0x6C, 19),
- VT8500_BANK(0x10, 0x30, 0x50, 0x70, 19),
- VT8500_BANK(0x14, 0x34, 0x54, 0x74, 23),
- },
-};
-
-static struct vt8500_gpio_data wm8505_data = {
- .num_banks = 10,
- .banks = {
- VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22),
- VT8500_BANK(0x40, 0x68, 0x90, 0xB8, 8),
- VT8500_BANK(0x44, 0x6C, 0x94, 0xBC, 32),
- VT8500_BANK(0x48, 0x70, 0x98, 0xC0, 6),
- VT8500_BANK(0x4C, 0x74, 0x9C, 0xC4, 16),
- VT8500_BANK(0x50, 0x78, 0xA0, 0xC8, 25),
- VT8500_BANK(0x54, 0x7C, 0xA4, 0xCC, 5),
- VT8500_BANK(0x58, 0x80, 0xA8, 0xD0, 5),
- VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12),
- VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16),
- VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
- },
-};
-
-/*
- * No information about which bits are valid so we just make
- * them all available until its figured out.
- */
-static struct vt8500_gpio_data wm8650_data = {
- .num_banks = 9,
- .banks = {
- VT8500_BANK(0x40, 0x80, 0xC0, 0x00, 32),
- VT8500_BANK(0x44, 0x84, 0xC4, 0x04, 32),
- VT8500_BANK(0x48, 0x88, 0xC8, 0x08, 32),
- VT8500_BANK(0x4C, 0x8C, 0xCC, 0x0C, 32),
- VT8500_BANK(0x50, 0x90, 0xD0, 0x10, 32),
- VT8500_BANK(0x54, 0x94, 0xD4, 0x14, 32),
- VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32),
- VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32),
- VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32),
- VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
- },
-};
-
-struct vt8500_gpio_chip {
- struct gpio_chip chip;
-
- const struct vt8500_gpio_bank_regoffsets *regs;
- void __iomem *base;
-};
-
-struct vt8500_data {
- struct vt8500_gpio_chip *chip;
- void __iomem *iobase;
- int num_banks;
-};
-
-
-#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
-
-static int vt8500_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- u32 val;
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- if (vt8500_chip->regs->en == NO_REG)
- return 0;
-
- val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
- val |= BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
-
- return 0;
-}
-
-static void vt8500_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
- u32 val;
-
- if (vt8500_chip->regs->en == NO_REG)
- return;
-
- val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
- val &= ~BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
-}
-
-static int vt8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
- val &= ~BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
-
- return 0;
-}
-
-static int vt8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
- val |= BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
-
- if (value) {
- val = readl_relaxed(vt8500_chip->base +
- vt8500_chip->regs->data_out);
- val |= BIT(offset);
- writel_relaxed(val, vt8500_chip->base +
- vt8500_chip->regs->data_out);
- }
- return 0;
-}
-
-static int vt8500_gpio_get_value(struct gpio_chip *chip, unsigned offset)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- return (readl_relaxed(vt8500_chip->base + vt8500_chip->regs->data_in) >>
- offset) & 1;
-}
-
-static void vt8500_gpio_set_value(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- u32 val = readl_relaxed(vt8500_chip->base +
- vt8500_chip->regs->data_out);
- if (value)
- val |= BIT(offset);
- else
- val &= ~BIT(offset);
-
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->data_out);
-}
-
-static int vt8500_of_xlate(struct gpio_chip *gc,
- const struct of_phandle_args *gpiospec, u32 *flags)
-{
- /* bank if specificed in gpiospec->args[0] */
- if (flags)
- *flags = gpiospec->args[2];
-
- return gpiospec->args[1];
-}
-
-static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base,
- const struct vt8500_gpio_data *data)
-{
- struct vt8500_data *priv;
- struct vt8500_gpio_chip *vtchip;
- struct gpio_chip *chip;
- int i;
- int pin_cnt = 0;
-
- priv = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_data), GFP_KERNEL);
- if (!priv) {
- dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
- }
-
- priv->chip = devm_kzalloc(&pdev->dev,
- sizeof(struct vt8500_gpio_chip) * data->num_banks,
- GFP_KERNEL);
- if (!priv->chip) {
- dev_err(&pdev->dev, "failed to allocate chip memory\n");
- return -ENOMEM;
- }
-
- priv->iobase = base;
- priv->num_banks = data->num_banks;
- platform_set_drvdata(pdev, priv);
-
- vtchip = priv->chip;
-
- for (i = 0; i < data->num_banks; i++) {
- vtchip[i].base = base;
- vtchip[i].regs = &data->banks[i];
-
- chip = &vtchip[i].chip;
-
- chip->of_xlate = vt8500_of_xlate;
- chip->of_gpio_n_cells = 3;
- chip->of_node = pdev->dev.of_node;
-
- chip->request = vt8500_gpio_request;
- chip->free = vt8500_gpio_free;
- chip->direction_input = vt8500_gpio_direction_input;
- chip->direction_output = vt8500_gpio_direction_output;
- chip->get = vt8500_gpio_get_value;
- chip->set = vt8500_gpio_set_value;
- chip->can_sleep = 0;
- chip->base = pin_cnt;
- chip->ngpio = data->banks[i].ngpio;
-
- pin_cnt += data->banks[i].ngpio;
-
- gpiochip_add(chip);
- }
- return 0;
-}
-
-static struct of_device_id vt8500_gpio_dt_ids[] = {
- { .compatible = "via,vt8500-gpio", .data = &vt8500_data, },
- { .compatible = "wm,wm8505-gpio", .data = &wm8505_data, },
- { .compatible = "wm,wm8650-gpio", .data = &wm8650_data, },
- { /* Sentinel */ },
-};
-
-static int vt8500_gpio_probe(struct platform_device *pdev)
-{
- int ret;
- void __iomem *gpio_base;
- struct resource *res;
- const struct of_device_id *of_id =
- of_match_device(vt8500_gpio_dt_ids, &pdev->dev);
-
- if (!of_id) {
- dev_err(&pdev->dev, "No matching driver data\n");
- return -ENODEV;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "Unable to get IO resource\n");
- return -ENODEV;
- }
-
- gpio_base = devm_request_and_ioremap(&pdev->dev, res);
- if (!gpio_base) {
- dev_err(&pdev->dev, "Unable to map GPIO registers\n");
- return -ENOMEM;
- }
-
- ret = vt8500_add_chips(pdev, gpio_base, of_id->data);
-
- return ret;
-}
-
-static int vt8500_gpio_remove(struct platform_device *pdev)
-{
- int i;
- int ret;
- struct vt8500_data *priv = platform_get_drvdata(pdev);
- struct vt8500_gpio_chip *vtchip = priv->chip;
-
- for (i = 0; i < priv->num_banks; i++) {
- ret = gpiochip_remove(&vtchip[i].chip);
- if (ret)
- dev_warn(&pdev->dev, "gpiochip_remove returned %d\n",
- ret);
- }
-
- return 0;
-}
-
-static struct platform_driver vt8500_gpio_driver = {
- .probe = vt8500_gpio_probe,
- .remove = vt8500_gpio_remove,
- .driver = {
- .name = "vt8500-gpio",
- .owner = THIS_MODULE,
- .of_match_table = vt8500_gpio_dt_ids,
- },
-};
-
-module_platform_driver(vt8500_gpio_driver);
-
-MODULE_DESCRIPTION("VT8500 GPIO Driver");
-MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
-MODULE_LICENSE("GPL v2");
-MODULE_DEVICE_TABLE(of, vt8500_gpio_dt_ids);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 6/6] gpio: vt8500: Remove arch-vt8500 gpio driver
@ 2013-04-02 4:41 ` Tony Prisk
0 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:41 UTC (permalink / raw)
To: linux-arm-kernel
With the move to a combined pinctrl/gpio driver, the arch-vt8500
gpio driver is no longer required.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
.../devicetree/bindings/gpio/gpio-vt8500.txt | 24 --
drivers/gpio/Kconfig | 6 -
drivers/gpio/Makefile | 1 -
drivers/gpio/gpio-vt8500.c | 355 --------------------
4 files changed, 386 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
delete mode 100644 drivers/gpio/gpio-vt8500.c
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
deleted file mode 100644
index f4dc523..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-VIA/Wondermedia VT8500 GPIO Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-gpio", "wm,wm8505-gpio"
- or "wm,wm8650-gpio" depending on your SoC
-- reg : Should contain 1 register range (address and length)
-- #gpio-cells : should be <3>.
- 1) bank
- 2) pin number
- 3) flags - should be 0
-
-Example:
-
- gpio: gpio-controller at d8110000 {
- compatible = "via,vt8500-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
- vibrate {
- gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */
- };
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 93aaadf..b166e30 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -227,12 +227,6 @@ config GPIO_TS5500
blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
LCD port.
-config GPIO_VT8500
- bool "VIA/Wondermedia SoC GPIO Support"
- depends on ARCH_VT8500
- help
- Say yes here to support the VT8500/WM8505/WM8650 GPIO controller.
-
config GPIO_XILINX
bool "Xilinx GPIO support"
depends on PPC_OF || MICROBLAZE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 22e07bc..a274d7d 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -80,7 +80,6 @@ obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o
obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o
-obj-$(CONFIG_GPIO_VT8500) += gpio-vt8500.o
obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c
deleted file mode 100644
index 81683ca..0000000
--- a/drivers/gpio/gpio-vt8500.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/* drivers/gpio/gpio-vt8500.c
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- * Based on arch/arm/mach-vt8500/gpio.c:
- * - Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/bitops.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_device.h>
-
-/*
- We handle GPIOs by bank, each bank containing up to 32 GPIOs covered
- by one set of registers (although not all may be valid).
-
- Because different SoC's have different register offsets, we pass the
- register offsets as data in vt8500_gpio_dt_ids[].
-
- A value of NO_REG is used to indicate that this register is not
- supported. Only used for ->en at the moment.
-*/
-
-#define NO_REG 0xFFFF
-
-/*
- * struct vt8500_gpio_bank_regoffsets
- * @en: offset to enable register of the bank
- * @dir: offset to direction register of the bank
- * @data_out: offset to the data out register of the bank
- * @data_in: offset to the data in register of the bank
- * @ngpio: highest valid pin in this bank
- */
-
-struct vt8500_gpio_bank_regoffsets {
- unsigned int en;
- unsigned int dir;
- unsigned int data_out;
- unsigned int data_in;
- unsigned char ngpio;
-};
-
-struct vt8500_gpio_data {
- unsigned int num_banks;
- struct vt8500_gpio_bank_regoffsets banks[];
-};
-
-#define VT8500_BANK(__en, __dir, __out, __in, __ngpio) \
-{ \
- .en = __en, \
- .dir = __dir, \
- .data_out = __out, \
- .data_in = __in, \
- .ngpio = __ngpio, \
-}
-
-static struct vt8500_gpio_data vt8500_data = {
- .num_banks = 7,
- .banks = {
- VT8500_BANK(NO_REG, 0x3C, 0x5C, 0x7C, 9),
- VT8500_BANK(0x00, 0x20, 0x40, 0x60, 26),
- VT8500_BANK(0x04, 0x24, 0x44, 0x64, 28),
- VT8500_BANK(0x08, 0x28, 0x48, 0x68, 31),
- VT8500_BANK(0x0C, 0x2C, 0x4C, 0x6C, 19),
- VT8500_BANK(0x10, 0x30, 0x50, 0x70, 19),
- VT8500_BANK(0x14, 0x34, 0x54, 0x74, 23),
- },
-};
-
-static struct vt8500_gpio_data wm8505_data = {
- .num_banks = 10,
- .banks = {
- VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22),
- VT8500_BANK(0x40, 0x68, 0x90, 0xB8, 8),
- VT8500_BANK(0x44, 0x6C, 0x94, 0xBC, 32),
- VT8500_BANK(0x48, 0x70, 0x98, 0xC0, 6),
- VT8500_BANK(0x4C, 0x74, 0x9C, 0xC4, 16),
- VT8500_BANK(0x50, 0x78, 0xA0, 0xC8, 25),
- VT8500_BANK(0x54, 0x7C, 0xA4, 0xCC, 5),
- VT8500_BANK(0x58, 0x80, 0xA8, 0xD0, 5),
- VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12),
- VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16),
- VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
- },
-};
-
-/*
- * No information about which bits are valid so we just make
- * them all available until its figured out.
- */
-static struct vt8500_gpio_data wm8650_data = {
- .num_banks = 9,
- .banks = {
- VT8500_BANK(0x40, 0x80, 0xC0, 0x00, 32),
- VT8500_BANK(0x44, 0x84, 0xC4, 0x04, 32),
- VT8500_BANK(0x48, 0x88, 0xC8, 0x08, 32),
- VT8500_BANK(0x4C, 0x8C, 0xCC, 0x0C, 32),
- VT8500_BANK(0x50, 0x90, 0xD0, 0x10, 32),
- VT8500_BANK(0x54, 0x94, 0xD4, 0x14, 32),
- VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32),
- VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32),
- VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32),
- VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
- },
-};
-
-struct vt8500_gpio_chip {
- struct gpio_chip chip;
-
- const struct vt8500_gpio_bank_regoffsets *regs;
- void __iomem *base;
-};
-
-struct vt8500_data {
- struct vt8500_gpio_chip *chip;
- void __iomem *iobase;
- int num_banks;
-};
-
-
-#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
-
-static int vt8500_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- u32 val;
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- if (vt8500_chip->regs->en == NO_REG)
- return 0;
-
- val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
- val |= BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
-
- return 0;
-}
-
-static void vt8500_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
- u32 val;
-
- if (vt8500_chip->regs->en == NO_REG)
- return;
-
- val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
- val &= ~BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
-}
-
-static int vt8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
- val &= ~BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
-
- return 0;
-}
-
-static int vt8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
- val |= BIT(offset);
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
-
- if (value) {
- val = readl_relaxed(vt8500_chip->base +
- vt8500_chip->regs->data_out);
- val |= BIT(offset);
- writel_relaxed(val, vt8500_chip->base +
- vt8500_chip->regs->data_out);
- }
- return 0;
-}
-
-static int vt8500_gpio_get_value(struct gpio_chip *chip, unsigned offset)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- return (readl_relaxed(vt8500_chip->base + vt8500_chip->regs->data_in) >>
- offset) & 1;
-}
-
-static void vt8500_gpio_set_value(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
- u32 val = readl_relaxed(vt8500_chip->base +
- vt8500_chip->regs->data_out);
- if (value)
- val |= BIT(offset);
- else
- val &= ~BIT(offset);
-
- writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->data_out);
-}
-
-static int vt8500_of_xlate(struct gpio_chip *gc,
- const struct of_phandle_args *gpiospec, u32 *flags)
-{
- /* bank if specificed in gpiospec->args[0] */
- if (flags)
- *flags = gpiospec->args[2];
-
- return gpiospec->args[1];
-}
-
-static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base,
- const struct vt8500_gpio_data *data)
-{
- struct vt8500_data *priv;
- struct vt8500_gpio_chip *vtchip;
- struct gpio_chip *chip;
- int i;
- int pin_cnt = 0;
-
- priv = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_data), GFP_KERNEL);
- if (!priv) {
- dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
- }
-
- priv->chip = devm_kzalloc(&pdev->dev,
- sizeof(struct vt8500_gpio_chip) * data->num_banks,
- GFP_KERNEL);
- if (!priv->chip) {
- dev_err(&pdev->dev, "failed to allocate chip memory\n");
- return -ENOMEM;
- }
-
- priv->iobase = base;
- priv->num_banks = data->num_banks;
- platform_set_drvdata(pdev, priv);
-
- vtchip = priv->chip;
-
- for (i = 0; i < data->num_banks; i++) {
- vtchip[i].base = base;
- vtchip[i].regs = &data->banks[i];
-
- chip = &vtchip[i].chip;
-
- chip->of_xlate = vt8500_of_xlate;
- chip->of_gpio_n_cells = 3;
- chip->of_node = pdev->dev.of_node;
-
- chip->request = vt8500_gpio_request;
- chip->free = vt8500_gpio_free;
- chip->direction_input = vt8500_gpio_direction_input;
- chip->direction_output = vt8500_gpio_direction_output;
- chip->get = vt8500_gpio_get_value;
- chip->set = vt8500_gpio_set_value;
- chip->can_sleep = 0;
- chip->base = pin_cnt;
- chip->ngpio = data->banks[i].ngpio;
-
- pin_cnt += data->banks[i].ngpio;
-
- gpiochip_add(chip);
- }
- return 0;
-}
-
-static struct of_device_id vt8500_gpio_dt_ids[] = {
- { .compatible = "via,vt8500-gpio", .data = &vt8500_data, },
- { .compatible = "wm,wm8505-gpio", .data = &wm8505_data, },
- { .compatible = "wm,wm8650-gpio", .data = &wm8650_data, },
- { /* Sentinel */ },
-};
-
-static int vt8500_gpio_probe(struct platform_device *pdev)
-{
- int ret;
- void __iomem *gpio_base;
- struct resource *res;
- const struct of_device_id *of_id =
- of_match_device(vt8500_gpio_dt_ids, &pdev->dev);
-
- if (!of_id) {
- dev_err(&pdev->dev, "No matching driver data\n");
- return -ENODEV;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "Unable to get IO resource\n");
- return -ENODEV;
- }
-
- gpio_base = devm_request_and_ioremap(&pdev->dev, res);
- if (!gpio_base) {
- dev_err(&pdev->dev, "Unable to map GPIO registers\n");
- return -ENOMEM;
- }
-
- ret = vt8500_add_chips(pdev, gpio_base, of_id->data);
-
- return ret;
-}
-
-static int vt8500_gpio_remove(struct platform_device *pdev)
-{
- int i;
- int ret;
- struct vt8500_data *priv = platform_get_drvdata(pdev);
- struct vt8500_gpio_chip *vtchip = priv->chip;
-
- for (i = 0; i < priv->num_banks; i++) {
- ret = gpiochip_remove(&vtchip[i].chip);
- if (ret)
- dev_warn(&pdev->dev, "gpiochip_remove returned %d\n",
- ret);
- }
-
- return 0;
-}
-
-static struct platform_driver vt8500_gpio_driver = {
- .probe = vt8500_gpio_probe,
- .remove = vt8500_gpio_remove,
- .driver = {
- .name = "vt8500-gpio",
- .owner = THIS_MODULE,
- .of_match_table = vt8500_gpio_dt_ids,
- },
-};
-
-module_platform_driver(vt8500_gpio_driver);
-
-MODULE_DESCRIPTION("VT8500 GPIO Driver");
-MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
-MODULE_LICENSE("GPL v2");
-MODULE_DEVICE_TABLE(of, vt8500_gpio_dt_ids);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCHv4 RESEND 0/6] arm: vt8500: Add support for pinctrl/gpio module
2013-04-02 4:40 ` Tony Prisk
@ 2013-04-02 23:17 ` Stephen Warren
-1 siblings, 0 replies; 20+ messages in thread
From: Stephen Warren @ 2013-04-02 23:17 UTC (permalink / raw)
To: Tony Prisk
Cc: linus.walleij, linux-arm-kernel, vt8500-wm8505-linux-kernel,
linux-kernel
On 04/01/2013 10:40 PM, Tony Prisk wrote:
> Sorry - got Linus W's email address wrong in first send.
>
> v4 changes:
> Changed as requested by Stephen Warren:
> Corrected the range checking in of_property_read_u32_index().
> Fix configs[0] assignment in wmt_pctl_dt_node_to_map_pull().
> Move the platform memory mapping from per-soc to common init.
> Drop the custom .of_xlate function and use the default of_gpio_simple_xlate.
Those changes all look fine.
> Remove the kfree(maps) call, and use devm_kzalloc to simplify the fail path.
I'm not sure that's a good idea.
The issue is that dt_node_to_maps() is called every time a pinctrl
consumer is probed, whereas the devm_kzalloc() call in dt_node_to_maps()
uses the pinctrl device itself, not the pinctrl consumer device.. Each
client's probe() could be deferred a few times. Hence, you may end up
accumulating all those map entries from the deferred probes, until the
pinctrl driver itself is remove()d. Similarly, if you unload/load a
(pinctrl client) driver module over and over, the same thing will happen.
Oh, and you left the following in there too:
> +static void wmt_pctl_dt_free_map(struct pinctrl_dev *pctldev,
> + kfree(maps);
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCHv4 RESEND 0/6] arm: vt8500: Add support for pinctrl/gpio module
@ 2013-04-02 23:17 ` Stephen Warren
0 siblings, 0 replies; 20+ messages in thread
From: Stephen Warren @ 2013-04-02 23:17 UTC (permalink / raw)
To: linux-arm-kernel
On 04/01/2013 10:40 PM, Tony Prisk wrote:
> Sorry - got Linus W's email address wrong in first send.
>
> v4 changes:
> Changed as requested by Stephen Warren:
> Corrected the range checking in of_property_read_u32_index().
> Fix configs[0] assignment in wmt_pctl_dt_node_to_map_pull().
> Move the platform memory mapping from per-soc to common init.
> Drop the custom .of_xlate function and use the default of_gpio_simple_xlate.
Those changes all look fine.
> Remove the kfree(maps) call, and use devm_kzalloc to simplify the fail path.
I'm not sure that's a good idea.
The issue is that dt_node_to_maps() is called every time a pinctrl
consumer is probed, whereas the devm_kzalloc() call in dt_node_to_maps()
uses the pinctrl device itself, not the pinctrl consumer device.. Each
client's probe() could be deferred a few times. Hence, you may end up
accumulating all those map entries from the deferred probes, until the
pinctrl driver itself is remove()d. Similarly, if you unload/load a
(pinctrl client) driver module over and over, the same thing will happen.
Oh, and you left the following in there too:
> +static void wmt_pctl_dt_free_map(struct pinctrl_dev *pctldev,
> + kfree(maps);
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property.
2013-04-02 4:40 ` Tony Prisk
@ 2013-04-02 23:42 ` Rob Herring
-1 siblings, 0 replies; 20+ messages in thread
From: Rob Herring @ 2013-04-02 23:42 UTC (permalink / raw)
To: Tony Prisk
Cc: linus.walleij, vt8500-wm8505-linux-kernel, linux-kernel,
linux-arm-kernel, swarren
On 04/01/2013 11:40 PM, Tony Prisk wrote:
> This patch adds an of_property_read_u32_index() function to allow
> reading a single indexed u32 value from a property containing multiple
> u32 values.
>
> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> Reviewed-by: Stephen Warren <swarren@nvidia.com>
> ---
> drivers/of/base.c | 33 +++++++++++++++++++++++++++++++++
> include/linux/of.h | 9 +++++++++
> 2 files changed, 42 insertions(+)
>
> diff --git a/drivers/of/base.c b/drivers/of/base.c
> index 321d3ef..f6c89ed 100644
> --- a/drivers/of/base.c
> +++ b/drivers/of/base.c
> @@ -746,6 +746,39 @@ struct device_node *of_find_node_by_phandle(phandle handle)
> EXPORT_SYMBOL(of_find_node_by_phandle);
>
> /**
> + * of_property_read_u32_index - Find and read a u32 from a multi-value property.
> + *
> + * @np: device node from which the property value is to be read.
> + * @propname: name of the property to be searched.
> + * @index: index of the u32 in the list of values
> + * @out_value: pointer to return value, modified only if no error.
> + *
> + * Search for a property in a device node and read nth 32-bit value from
> + * it. Returns 0 on success, -EINVAL if the property does not exist,
> + * -ENODATA if property does not have a value, and -EOVERFLOW if the
> + * property data isn't large enough.
> + *
> + * The out_value is modified only if a valid u32 value can be decoded.
> + */
> +int of_property_read_u32_index(const struct device_node *np,
> + const char *propname,
> + u32 index, u32 *out_value)
> +{
> + struct property *prop = of_find_property(np, propname, NULL);
> +
> + if (!prop)
> + return -EINVAL;
> + if (!prop->value)
> + return -ENODATA;
> + if (((index + 1) * sizeof(*out_value)) > prop->length)
> + return -EOVERFLOW;
Yet another copy of almost the same code...
Can you re-factor things to do something like this:
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 321d3ef..482d29c 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -745,6 +745,21 @@ struct device_node *of_find_node_by_phandle(phandle handle)
}
EXPORT_SYMBOL(of_find_node_by_phandle);
+static void *of_find_property_value_of_size(const struct device_node *np,
+ const char *propname, u32 len)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (len > prop->length)
+ return -EOVERFLOW;
+
+ return prop->value;
+}
+
/**
* of_property_read_u8_array - Find and read an array of u8 from a property.
*
@@ -766,17 +781,11 @@ EXPORT_SYMBOL(of_find_node_by_phandle);
int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz)
{
- struct property *prop = of_find_property(np, propname, NULL);
- const u8 *val;
+ const u8 *val = of_find_property_value_of_size(np, propname, sz * sizeof(*out_values));
- if (!prop)
- return -EINVAL;
- if (!prop->value)
- return -ENODATA;
- if ((sz * sizeof(*out_values)) > prop->length)
- return -EOVERFLOW;
+ if (IS_ERR(val))
+ return PTR_ERR(val);
- val = prop->value;
while (sz--)
*out_values++ = *val++;
return 0;
> + *out_value = be32_to_cpup(((__be32 *)prop->value) + index);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_property_read_u32_index);
> +
> +/**
> * of_property_read_u8_array - Find and read an array of u8 from a property.
> *
> * @np: device node from which the property value is to be read.
> diff --git a/include/linux/of.h b/include/linux/of.h
> index a0f1292..c0747a4 100644
> --- a/include/linux/of.h
> +++ b/include/linux/of.h
> @@ -235,6 +235,9 @@ extern struct device_node *of_find_node_with_property(
> extern struct property *of_find_property(const struct device_node *np,
> const char *name,
> int *lenp);
> +extern int of_property_read_u32_index(const struct device_node *np,
> + const char *propname,
> + u32 index, u32 *out_value);
> extern int of_property_read_u8_array(const struct device_node *np,
> const char *propname, u8 *out_values, size_t sz);
> extern int of_property_read_u16_array(const struct device_node *np,
> @@ -394,6 +397,12 @@ static inline struct device_node *of_find_compatible_node(
> return NULL;
> }
>
> +static inline int of_property_read_u32_index(const struct device_node *np,
> + const char *propname, u32 index, u32 *out_value)
> +{
> + return -ENOSYS;
> +}
> +
> static inline int of_property_read_u8_array(const struct device_node *np,
> const char *propname, u8 *out_values, size_t sz)
> {
>
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property.
@ 2013-04-02 23:42 ` Rob Herring
0 siblings, 0 replies; 20+ messages in thread
From: Rob Herring @ 2013-04-02 23:42 UTC (permalink / raw)
To: linux-arm-kernel
On 04/01/2013 11:40 PM, Tony Prisk wrote:
> This patch adds an of_property_read_u32_index() function to allow
> reading a single indexed u32 value from a property containing multiple
> u32 values.
>
> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> Reviewed-by: Stephen Warren <swarren@nvidia.com>
> ---
> drivers/of/base.c | 33 +++++++++++++++++++++++++++++++++
> include/linux/of.h | 9 +++++++++
> 2 files changed, 42 insertions(+)
>
> diff --git a/drivers/of/base.c b/drivers/of/base.c
> index 321d3ef..f6c89ed 100644
> --- a/drivers/of/base.c
> +++ b/drivers/of/base.c
> @@ -746,6 +746,39 @@ struct device_node *of_find_node_by_phandle(phandle handle)
> EXPORT_SYMBOL(of_find_node_by_phandle);
>
> /**
> + * of_property_read_u32_index - Find and read a u32 from a multi-value property.
> + *
> + * @np: device node from which the property value is to be read.
> + * @propname: name of the property to be searched.
> + * @index: index of the u32 in the list of values
> + * @out_value: pointer to return value, modified only if no error.
> + *
> + * Search for a property in a device node and read nth 32-bit value from
> + * it. Returns 0 on success, -EINVAL if the property does not exist,
> + * -ENODATA if property does not have a value, and -EOVERFLOW if the
> + * property data isn't large enough.
> + *
> + * The out_value is modified only if a valid u32 value can be decoded.
> + */
> +int of_property_read_u32_index(const struct device_node *np,
> + const char *propname,
> + u32 index, u32 *out_value)
> +{
> + struct property *prop = of_find_property(np, propname, NULL);
> +
> + if (!prop)
> + return -EINVAL;
> + if (!prop->value)
> + return -ENODATA;
> + if (((index + 1) * sizeof(*out_value)) > prop->length)
> + return -EOVERFLOW;
Yet another copy of almost the same code...
Can you re-factor things to do something like this:
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 321d3ef..482d29c 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -745,6 +745,21 @@ struct device_node *of_find_node_by_phandle(phandle handle)
}
EXPORT_SYMBOL(of_find_node_by_phandle);
+static void *of_find_property_value_of_size(const struct device_node *np,
+ const char *propname, u32 len)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (len > prop->length)
+ return -EOVERFLOW;
+
+ return prop->value;
+}
+
/**
* of_property_read_u8_array - Find and read an array of u8 from a property.
*
@@ -766,17 +781,11 @@ EXPORT_SYMBOL(of_find_node_by_phandle);
int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz)
{
- struct property *prop = of_find_property(np, propname, NULL);
- const u8 *val;
+ const u8 *val = of_find_property_value_of_size(np, propname, sz * sizeof(*out_values));
- if (!prop)
- return -EINVAL;
- if (!prop->value)
- return -ENODATA;
- if ((sz * sizeof(*out_values)) > prop->length)
- return -EOVERFLOW;
+ if (IS_ERR(val))
+ return PTR_ERR(val);
- val = prop->value;
while (sz--)
*out_values++ = *val++;
return 0;
> + *out_value = be32_to_cpup(((__be32 *)prop->value) + index);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_property_read_u32_index);
> +
> +/**
> * of_property_read_u8_array - Find and read an array of u8 from a property.
> *
> * @np: device node from which the property value is to be read.
> diff --git a/include/linux/of.h b/include/linux/of.h
> index a0f1292..c0747a4 100644
> --- a/include/linux/of.h
> +++ b/include/linux/of.h
> @@ -235,6 +235,9 @@ extern struct device_node *of_find_node_with_property(
> extern struct property *of_find_property(const struct device_node *np,
> const char *name,
> int *lenp);
> +extern int of_property_read_u32_index(const struct device_node *np,
> + const char *propname,
> + u32 index, u32 *out_value);
> extern int of_property_read_u8_array(const struct device_node *np,
> const char *propname, u8 *out_values, size_t sz);
> extern int of_property_read_u16_array(const struct device_node *np,
> @@ -394,6 +397,12 @@ static inline struct device_node *of_find_compatible_node(
> return NULL;
> }
>
> +static inline int of_property_read_u32_index(const struct device_node *np,
> + const char *propname, u32 index, u32 *out_value)
> +{
> + return -ENOSYS;
> +}
> +
> static inline int of_property_read_u8_array(const struct device_node *np,
> const char *propname, u8 *out_values, size_t sz)
> {
>
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property.
2013-04-02 4:39 [PATCHv4 " Tony Prisk
@ 2013-04-02 4:39 ` Tony Prisk
0 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:39 UTC (permalink / raw)
To: linux.walleij
Cc: swarren, linux-arm-kernel, vt8500-wm8505-linux-kernel,
linux-kernel, Tony Prisk
This patch adds an of_property_read_u32_index() function to allow
reading a single indexed u32 value from a property containing multiple
u32 values.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
---
drivers/of/base.c | 33 +++++++++++++++++++++++++++++++++
include/linux/of.h | 9 +++++++++
2 files changed, 42 insertions(+)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 321d3ef..f6c89ed 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -746,6 +746,39 @@ struct device_node *of_find_node_by_phandle(phandle handle)
EXPORT_SYMBOL(of_find_node_by_phandle);
/**
+ * of_property_read_u32_index - Find and read a u32 from a multi-value property.
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the u32 in the list of values
+ * @out_value: pointer to return value, modified only if no error.
+ *
+ * Search for a property in a device node and read nth 32-bit value from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_value is modified only if a valid u32 value can be decoded.
+ */
+int of_property_read_u32_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u32 *out_value)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (((index + 1) * sizeof(*out_value)) > prop->length)
+ return -EOVERFLOW;
+
+ *out_value = be32_to_cpup(((__be32 *)prop->value) + index);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u32_index);
+
+/**
* of_property_read_u8_array - Find and read an array of u8 from a property.
*
* @np: device node from which the property value is to be read.
diff --git a/include/linux/of.h b/include/linux/of.h
index a0f1292..c0747a4 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -235,6 +235,9 @@ extern struct device_node *of_find_node_with_property(
extern struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp);
+extern int of_property_read_u32_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u32 *out_value);
extern int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz);
extern int of_property_read_u16_array(const struct device_node *np,
@@ -394,6 +397,12 @@ static inline struct device_node *of_find_compatible_node(
return NULL;
}
+static inline int of_property_read_u32_index(const struct device_node *np,
+ const char *propname, u32 index, u32 *out_value)
+{
+ return -ENOSYS;
+}
+
static inline int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz)
{
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property.
@ 2013-04-02 4:39 ` Tony Prisk
0 siblings, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2013-04-02 4:39 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds an of_property_read_u32_index() function to allow
reading a single indexed u32 value from a property containing multiple
u32 values.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
---
drivers/of/base.c | 33 +++++++++++++++++++++++++++++++++
include/linux/of.h | 9 +++++++++
2 files changed, 42 insertions(+)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 321d3ef..f6c89ed 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -746,6 +746,39 @@ struct device_node *of_find_node_by_phandle(phandle handle)
EXPORT_SYMBOL(of_find_node_by_phandle);
/**
+ * of_property_read_u32_index - Find and read a u32 from a multi-value property.
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the u32 in the list of values
+ * @out_value: pointer to return value, modified only if no error.
+ *
+ * Search for a property in a device node and read nth 32-bit value from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_value is modified only if a valid u32 value can be decoded.
+ */
+int of_property_read_u32_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u32 *out_value)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (((index + 1) * sizeof(*out_value)) > prop->length)
+ return -EOVERFLOW;
+
+ *out_value = be32_to_cpup(((__be32 *)prop->value) + index);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u32_index);
+
+/**
* of_property_read_u8_array - Find and read an array of u8 from a property.
*
* @np: device node from which the property value is to be read.
diff --git a/include/linux/of.h b/include/linux/of.h
index a0f1292..c0747a4 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -235,6 +235,9 @@ extern struct device_node *of_find_node_with_property(
extern struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp);
+extern int of_property_read_u32_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u32 *out_value);
extern int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz);
extern int of_property_read_u16_array(const struct device_node *np,
@@ -394,6 +397,12 @@ static inline struct device_node *of_find_compatible_node(
return NULL;
}
+static inline int of_property_read_u32_index(const struct device_node *np,
+ const char *propname, u32 index, u32 *out_value)
+{
+ return -ENOSYS;
+}
+
static inline int of_property_read_u8_array(const struct device_node *np,
const char *propname, u8 *out_values, size_t sz)
{
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
end of thread, other threads:[~2013-04-02 23:42 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-02 4:40 [PATCHv4 RESEND 0/6] arm: vt8500: Add support for pinctrl/gpio module Tony Prisk
2013-04-02 4:40 ` Tony Prisk
2013-04-02 4:40 ` [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property Tony Prisk
2013-04-02 4:40 ` Tony Prisk
2013-04-02 23:42 ` Rob Herring
2013-04-02 23:42 ` Rob Herring
2013-04-02 4:40 ` [PATCHv4 2/6] arm: vt8500: Increase available GPIOs on arch-vt8500 Tony Prisk
2013-04-02 4:40 ` Tony Prisk
2013-04-02 4:40 ` [PATCHv4 3/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500 Tony Prisk
2013-04-02 4:40 ` Tony Prisk
2013-04-02 4:40 ` [PATCHv4 4/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver Tony Prisk
2013-04-02 4:40 ` Tony Prisk
2013-04-02 4:41 ` [PATCHv4 5/6] arm: vt8500: Remove gpio devicetree nodes Tony Prisk
2013-04-02 4:41 ` Tony Prisk
2013-04-02 4:41 ` [PATCHv4 6/6] gpio: vt8500: Remove arch-vt8500 gpio driver Tony Prisk
2013-04-02 4:41 ` Tony Prisk
2013-04-02 23:17 ` [PATCHv4 RESEND 0/6] arm: vt8500: Add support for pinctrl/gpio module Stephen Warren
2013-04-02 23:17 ` Stephen Warren
-- strict thread matches above, loose matches on Subject: below --
2013-04-02 4:39 [PATCHv4 " Tony Prisk
2013-04-02 4:39 ` [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property Tony Prisk
2013-04-02 4:39 ` Tony Prisk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.