All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org,
	linux-rpi-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Phil Elwell <phil@raspberrypi.com>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v3 033/105] drm/vc4: crtc: Assign output to channel automatically
Date: Wed, 27 May 2020 17:48:03 +0200	[thread overview]
Message-ID: <5186409a2b5d290b78f6b518a2eb8e407bf1e83e.1590594512.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.aaf2100bd7da4609f8bcb8216247d4b4e4379639.1590594512.git-series.maxime@cerno.tech>

The HVS found in the BCM2711 has 6 outputs and 3 FIFOs, with each output
being connected to a pixelvalve, and some muxing between the FIFOs and
outputs.

Any output cannot feed from any FIFO though, and they all have a bunch of
constraints.

In order to support this, let's store the possible FIFOs each output can be
assigned to in the vc4_crtc_data, and use that information at atomic_check
time to iterate over all the CRTCs enabled and assign them FIFOs.

The channel assigned is then set in the vc4_crtc_state so that the rest of
the driver can use it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_crtc.c |  37 +++++----
 drivers/gpu/drm/vc4/vc4_drv.h  |   7 +-
 drivers/gpu/drm/vc4/vc4_kms.c  | 142 ++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/vc4/vc4_regs.h |  10 ++-
 4 files changed, 172 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 580b37ad514d..a6c3f2f907bd 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -88,6 +88,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(crtc->state);
 	unsigned int cob_size;
 	u32 val;
 	int fifo_lines;
@@ -104,7 +105,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc,
 	 * Read vertical scanline which is currently composed for our
 	 * pixelvalve by the HVS, and also the scaler status.
 	 */
-	val = HVS_READ(SCALER_DISPSTATX(vc4_crtc->channel));
+	val = HVS_READ(SCALER_DISPSTATX(vc4_crtc_state->assigned_channel));
 
 	/* Get optional system timestamp after query. */
 	if (etime)
@@ -124,7 +125,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc,
 			*hpos += mode->crtc_htotal / 2;
 	}
 
-	cob_size = vc4_crtc_get_cob_allocation(vc4, vc4_crtc->channel);
+	cob_size = vc4_crtc_get_cob_allocation(vc4, vc4_crtc_state->assigned_channel);
 	/* This is the offset we need for translating hvs -> pv scanout pos. */
 	fifo_lines = cob_size / mode->crtc_hdisplay;
 
@@ -211,6 +212,7 @@ vc4_crtc_lut_load(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(crtc->state);
 	u32 i;
 
 	/* The LUT memory is laid out with each HVS channel in order,
@@ -219,7 +221,7 @@ vc4_crtc_lut_load(struct drm_crtc *crtc)
 	 */
 	HVS_WRITE(SCALER_GAMADDR,
 		  SCALER_GAMADDR_AUTOINC |
-		  (vc4_crtc->channel * 3 * crtc->gamma_size));
+		  (vc4_crtc_state->assigned_channel * 3 * crtc->gamma_size));
 
 	for (i = 0; i < crtc->gamma_size; i++)
 		HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_r[i]);
@@ -392,7 +394,7 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 		drm_print_regset32(&p, &vc4_crtc->regset);
 	}
 
-	if (vc4_crtc->channel == 2) {
+	if (vc4_crtc->data->hvs_output == 2) {
 		u32 dispctrl;
 		u32 dsp3_mux;
 
@@ -419,7 +421,7 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 	if (!vc4_state->feed_txp)
 		vc4_crtc_config_pv(crtc);
 
-	HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
+	HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel),
 		  SCALER_DISPBKGND_AUTOHS |
 		  SCALER_DISPBKGND_GAMMA |
 		  (interlace ? SCALER_DISPBKGND_INTERLACE : 0));
@@ -451,7 +453,8 @@ static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
-	u32 chan = vc4_crtc->channel;
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(old_state);
+	u32 chan = vc4_crtc_state->assigned_channel;
 	int ret;
 	require_hvs_enabled(dev);
 
@@ -530,12 +533,12 @@ static void vc4_crtc_update_dlist(struct drm_crtc *crtc)
 			crtc->state->event = NULL;
 		}
 
-		HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+		HVS_WRITE(SCALER_DISPLISTX(vc4_state->assigned_channel),
 			  vc4_state->mm.start);
 
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 	} else {
-		HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+		HVS_WRITE(SCALER_DISPLISTX(vc4_state->assigned_channel),
 			  vc4_state->mm.start);
 	}
 }
@@ -584,7 +587,7 @@ static void vc4_crtc_atomic_enable(struct drm_crtc *crtc,
 			    (vc4_state->feed_txp ?
 					SCALER5_DISPCTRLX_ONESHOT : 0);
 
-	HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel), dispctrl);
+	HVS_WRITE(SCALER_DISPCTRLX(vc4_state->assigned_channel), dispctrl);
 
 	/* When feeding the transposer block the pixelvalve is unneeded and
 	 * should not be enabled.
@@ -700,7 +703,6 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 {
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
-	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
 	struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
 	struct drm_plane *plane;
 	struct vc4_plane_state *vc4_plane_state;
@@ -742,8 +744,8 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 		/* This sets a black background color fill, as is the case
 		 * with other DRM drivers.
 		 */
-		HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
-			  HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel)) |
+		HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel),
+			  HVS_READ(SCALER_DISPBKGNDX(vc4_state->assigned_channel)) |
 			  SCALER_DISPBKGND_FILL);
 
 	/* Only update DISPLIST if the CRTC was already running and is not
@@ -757,7 +759,7 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 		vc4_crtc_update_dlist(crtc);
 
 	if (crtc->state->color_mgmt_changed) {
-		u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel));
+		u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(vc4_state->assigned_channel));
 
 		if (crtc->state->gamma_lut) {
 			vc4_crtc_update_gamma_lut(crtc);
@@ -769,7 +771,7 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 			 */
 			dispbkgndx &= ~SCALER_DISPBKGND_GAMMA;
 		}
-		HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel), dispbkgndx);
+		HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel), dispbkgndx);
 	}
 
 	if (debug_dump_regs) {
@@ -800,7 +802,7 @@ static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc)
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
-	u32 chan = vc4_crtc->channel;
+	u32 chan = vc4_state->assigned_channel;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->event_lock, flags);
@@ -999,6 +1001,7 @@ static struct drm_crtc_state *vc4_crtc_duplicate_state(struct drm_crtc *crtc)
 	old_vc4_state = to_vc4_crtc_state(crtc->state);
 	vc4_state->feed_txp = old_vc4_state->feed_txp;
 	vc4_state->margins = old_vc4_state->margins;
+	vc4_state->assigned_channel = old_vc4_state->assigned_channel;
 
 	__drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base);
 	return &vc4_state->base;
@@ -1060,6 +1063,7 @@ static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv0_data = {
+	.hvs_available_channels = BIT(0),
 	.hvs_output = 0,
 	.debugfs_name = "crtc0_regs",
 	.pixels_per_clock = 1,
@@ -1070,6 +1074,7 @@ static const struct vc4_crtc_data bcm2835_pv0_data = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv1_data = {
+	.hvs_available_channels = BIT(2),
 	.hvs_output = 2,
 	.debugfs_name = "crtc1_regs",
 	.pixels_per_clock = 1,
@@ -1080,6 +1085,7 @@ static const struct vc4_crtc_data bcm2835_pv1_data = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv2_data = {
+	.hvs_available_channels = BIT(1),
 	.hvs_output = 1,
 	.debugfs_name = "crtc2_regs",
 	.pixels_per_clock = 1,
@@ -1171,7 +1177,6 @@ static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
 	drm_crtc_init_with_planes(drm, crtc, primary_plane, NULL,
 				  &vc4_crtc_funcs, NULL);
 	drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs);
-	vc4_crtc->channel = vc4_crtc->data->hvs_output;
 	drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r));
 	drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size);
 
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 9d120aae4af9..73156a53822f 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -450,6 +450,9 @@ to_vc4_encoder(struct drm_encoder *encoder)
 }
 
 struct vc4_crtc_data {
+	/* Which channels of the HVS can the output source from */
+	unsigned int hvs_available_channels;
+
 	/* Which output of the HVS this pixelvalve sources from. */
 	int hvs_output;
 
@@ -469,9 +472,6 @@ struct vc4_crtc {
 	/* Timestamp at start of vblank irq - unaffected by lock delays. */
 	ktime_t t_vblank;
 
-	/* Which HVS channel we're using for our CRTC. */
-	int channel;
-
 	u8 lut_r[256];
 	u8 lut_g[256];
 	u8 lut_b[256];
@@ -493,6 +493,7 @@ struct vc4_crtc_state {
 	struct drm_mm_node mm;
 	bool feed_txp;
 	bool txp_armed;
+	unsigned int assigned_channel;
 
 	struct {
 		unsigned int left;
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index 29b75b60d858..db00625c61dd 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -11,6 +11,8 @@
  * crtc, HDMI encoder).
  */
 
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
 #include <linux/clk.h>
 
 #include <drm/drm_atomic.h>
@@ -146,6 +148,72 @@ vc4_ctm_commit(struct vc4_dev *vc4, struct drm_atomic_state *state)
 		  VC4_SET_FIELD(ctm_state->fifo, SCALER_OLEDOFFS_DISPFIFO));
 }
 
+static void vc4_hvs_pv_muxing_commit(struct vc4_dev *vc4,
+				     struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	unsigned char dsp2_mux = 0;
+	unsigned char dsp3_mux = 3;
+	unsigned char dsp4_mux = 3;
+	unsigned char dsp5_mux = 3;
+	unsigned int i;
+	u32 reg;
+
+	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+		struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state);
+		struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+
+		if (!crtc_state->active)
+			continue;
+
+		switch (vc4_crtc->data->hvs_output) {
+		case 2:
+			dsp2_mux = (vc4_state->assigned_channel == 2) ? 0 : 1;
+			break;
+
+		case 3:
+			dsp3_mux = vc4_state->assigned_channel;
+			break;
+
+		case 4:
+			dsp4_mux = vc4_state->assigned_channel;
+			break;
+
+		case 5:
+			dsp5_mux = vc4_state->assigned_channel;
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	reg = HVS_READ(SCALER_DISPECTRL);
+	if (FIELD_GET(SCALER_DISPECTRL_DSP2_MUX_MASK, reg) != dsp2_mux)
+		HVS_WRITE(SCALER_DISPECTRL,
+			  (reg & ~SCALER_DISPECTRL_DSP2_MUX_MASK) |
+			  VC4_SET_FIELD(dsp2_mux, SCALER_DISPECTRL_DSP2_MUX));
+
+	reg = HVS_READ(SCALER_DISPCTRL);
+	if (FIELD_GET(SCALER_DISPCTRL_DSP3_MUX_MASK, reg) != dsp3_mux)
+		HVS_WRITE(SCALER_DISPCTRL,
+			  (reg & ~SCALER_DISPCTRL_DSP3_MUX_MASK) |
+			  VC4_SET_FIELD(dsp3_mux, SCALER_DISPCTRL_DSP3_MUX));
+
+	reg = HVS_READ(SCALER_DISPEOLN);
+	if (FIELD_GET(SCALER_DISPEOLN_DSP4_MUX_MASK, reg) != dsp4_mux)
+		HVS_WRITE(SCALER_DISPEOLN,
+			  (reg & ~SCALER_DISPEOLN_DSP4_MUX_MASK) |
+			  VC4_SET_FIELD(dsp4_mux, SCALER_DISPEOLN_DSP4_MUX));
+
+	reg = HVS_READ(SCALER_DISPDITHER);
+	if (FIELD_GET(SCALER_DISPDITHER_DSP5_MUX_MASK, reg) != dsp5_mux)
+		HVS_WRITE(SCALER_DISPDITHER,
+			  (reg & ~SCALER_DISPDITHER_DSP5_MUX_MASK) |
+			  VC4_SET_FIELD(dsp5_mux, SCALER_DISPDITHER_DSP5_MUX));
+}
+
 static void
 vc4_atomic_complete_commit(struct drm_atomic_state *state)
 {
@@ -156,11 +224,15 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
 	int i;
 
 	for (i = 0; i < dev->mode_config.num_crtc; i++) {
-		if (!state->crtcs[i].ptr || !state->crtcs[i].commit)
+		struct __drm_crtcs_state *_state = &state->crtcs[i];
+		struct vc4_crtc_state *vc4_crtc_state;
+
+		if (!_state->ptr || !_state->commit)
 			continue;
 
-		vc4_crtc = to_vc4_crtc(state->crtcs[i].ptr);
-		vc4_hvs_mask_underrun(dev, vc4_crtc->channel);
+		vc4_crtc = to_vc4_crtc(_state->ptr);
+		vc4_crtc_state = to_vc4_crtc_state(_state->state);
+		vc4_hvs_mask_underrun(dev, vc4_crtc_state->assigned_channel);
 	}
 
 	clk_set_rate(hvs->core_clk, 500000000);
@@ -172,6 +244,7 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
 	drm_atomic_helper_commit_modeset_disables(dev, state);
 
 	vc4_ctm_commit(vc4, state);
+	vc4_hvs_pv_muxing_commit(vc4, state);
 
 	drm_atomic_helper_commit_planes(dev, state, 0);
 
@@ -381,8 +454,11 @@ vc4_ctm_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
 
 		/* CTM is being enabled or the matrix changed. */
 		if (new_crtc_state->ctm) {
+			struct vc4_crtc_state *vc4_crtc_state =
+				to_vc4_crtc_state(new_crtc_state);
+
 			/* fifo is 1-based since 0 disables CTM. */
-			int fifo = to_vc4_crtc(crtc)->channel + 1;
+			int fifo = vc4_crtc_state->assigned_channel + 1;
 
 			/* Check userland isn't trying to turn on CTM for more
 			 * than one CRTC at a time.
@@ -495,10 +571,66 @@ static const struct drm_private_state_funcs vc4_load_tracker_state_funcs = {
 	.atomic_destroy_state = vc4_load_tracker_destroy_state,
 };
 
+#define NUM_OUTPUTS  6
+#define NUM_CHANNELS 3
+
 static int
 vc4_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
 {
-	int ret;
+	unsigned long unassigned_channels = GENMASK(NUM_CHANNELS - 1, 0);
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	int i, ret;
+
+	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+		struct vc4_crtc_state *vc4_crtc_state =
+			to_vc4_crtc_state(crtc_state);
+		struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+		bool is_assigned = false;
+		unsigned int channel;
+
+		if (!crtc_state->active)
+			continue;
+
+		/*
+		 * The problem we have to solve here is that we have
+		 * up to 7 encoders, connected to up to 6 CRTCs.
+		 *
+		 * Those CRTCs, depending on the instance, can be
+		 * routed to 1, 2 or 3 HVS FIFOs, and we need to set
+		 * the change the muxing between FIFOs and outputs in
+		 * the HVS accordingly.
+		 *
+		 * It would be pretty hard to come up with an
+		 * algorithm that would generically solve
+		 * this. However, the current routing trees we support
+		 * allow us to simplify a bit the problem.
+		 *
+		 * Indeed, with the current supported layouts, if we
+		 * try to assign in the ascending crtc index order the
+		 * FIFOs, we can't fall into the situation where an
+		 * earlier CRTC that had multiple routes is assigned
+		 * one that was the only option for a later CRTC.
+		 *
+		 * If the layout changes and doesn't give us that in
+		 * the future, we will need to have something smarter,
+		 * but it works so far.
+		 */
+		for_each_set_bit(channel, &unassigned_channels,
+				 sizeof(unassigned_channels)) {
+
+			if (!(BIT(channel) & vc4_crtc->data->hvs_available_channels))
+				continue;
+
+			vc4_crtc_state->assigned_channel = channel;
+			unassigned_channels &= ~BIT(channel);
+			is_assigned = true;
+			break;
+		}
+
+		if (!is_assigned)
+			return -EINVAL;
+	}
 
 	ret = vc4_ctm_atomic_check(dev, state);
 	if (ret < 0)
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 8a51baf681fe..b96ebbb1354b 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -287,9 +287,19 @@
 
 #define SCALER_DISPID                           0x00000008
 #define SCALER_DISPECTRL                        0x0000000c
+# define SCALER_DISPECTRL_DSP2_MUX_SHIFT	31
+# define SCALER_DISPECTRL_DSP2_MUX_MASK		VC4_MASK(31, 31)
+
 #define SCALER_DISPPROF                         0x00000010
+
 #define SCALER_DISPDITHER                       0x00000014
+# define SCALER_DISPDITHER_DSP5_MUX_SHIFT	30
+# define SCALER_DISPDITHER_DSP5_MUX_MASK	VC4_MASK(31, 30)
+
 #define SCALER_DISPEOLN                         0x00000018
+# define SCALER_DISPEOLN_DSP4_MUX_SHIFT		30
+# define SCALER_DISPEOLN_DSP4_MUX_MASK		VC4_MASK(31, 30)
+
 #define SCALER_DISPLIST0                        0x00000020
 #define SCALER_DISPLIST1                        0x00000024
 #define SCALER_DISPLIST2                        0x00000028
-- 
git-series 0.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Eric Anholt <eric@anholt.net>
Cc: Tim Gover <tim.gover@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	Phil Elwell <phil@raspberrypi.com>,
	linux-arm-kernel@lists.infradead.org,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v3 033/105] drm/vc4: crtc: Assign output to channel automatically
Date: Wed, 27 May 2020 17:48:03 +0200	[thread overview]
Message-ID: <5186409a2b5d290b78f6b518a2eb8e407bf1e83e.1590594512.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.aaf2100bd7da4609f8bcb8216247d4b4e4379639.1590594512.git-series.maxime@cerno.tech>

The HVS found in the BCM2711 has 6 outputs and 3 FIFOs, with each output
being connected to a pixelvalve, and some muxing between the FIFOs and
outputs.

Any output cannot feed from any FIFO though, and they all have a bunch of
constraints.

In order to support this, let's store the possible FIFOs each output can be
assigned to in the vc4_crtc_data, and use that information at atomic_check
time to iterate over all the CRTCs enabled and assign them FIFOs.

The channel assigned is then set in the vc4_crtc_state so that the rest of
the driver can use it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_crtc.c |  37 +++++----
 drivers/gpu/drm/vc4/vc4_drv.h  |   7 +-
 drivers/gpu/drm/vc4/vc4_kms.c  | 142 ++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/vc4/vc4_regs.h |  10 ++-
 4 files changed, 172 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 580b37ad514d..a6c3f2f907bd 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -88,6 +88,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(crtc->state);
 	unsigned int cob_size;
 	u32 val;
 	int fifo_lines;
@@ -104,7 +105,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc,
 	 * Read vertical scanline which is currently composed for our
 	 * pixelvalve by the HVS, and also the scaler status.
 	 */
-	val = HVS_READ(SCALER_DISPSTATX(vc4_crtc->channel));
+	val = HVS_READ(SCALER_DISPSTATX(vc4_crtc_state->assigned_channel));
 
 	/* Get optional system timestamp after query. */
 	if (etime)
@@ -124,7 +125,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc,
 			*hpos += mode->crtc_htotal / 2;
 	}
 
-	cob_size = vc4_crtc_get_cob_allocation(vc4, vc4_crtc->channel);
+	cob_size = vc4_crtc_get_cob_allocation(vc4, vc4_crtc_state->assigned_channel);
 	/* This is the offset we need for translating hvs -> pv scanout pos. */
 	fifo_lines = cob_size / mode->crtc_hdisplay;
 
@@ -211,6 +212,7 @@ vc4_crtc_lut_load(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(crtc->state);
 	u32 i;
 
 	/* The LUT memory is laid out with each HVS channel in order,
@@ -219,7 +221,7 @@ vc4_crtc_lut_load(struct drm_crtc *crtc)
 	 */
 	HVS_WRITE(SCALER_GAMADDR,
 		  SCALER_GAMADDR_AUTOINC |
-		  (vc4_crtc->channel * 3 * crtc->gamma_size));
+		  (vc4_crtc_state->assigned_channel * 3 * crtc->gamma_size));
 
 	for (i = 0; i < crtc->gamma_size; i++)
 		HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_r[i]);
@@ -392,7 +394,7 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 		drm_print_regset32(&p, &vc4_crtc->regset);
 	}
 
-	if (vc4_crtc->channel == 2) {
+	if (vc4_crtc->data->hvs_output == 2) {
 		u32 dispctrl;
 		u32 dsp3_mux;
 
@@ -419,7 +421,7 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 	if (!vc4_state->feed_txp)
 		vc4_crtc_config_pv(crtc);
 
-	HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
+	HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel),
 		  SCALER_DISPBKGND_AUTOHS |
 		  SCALER_DISPBKGND_GAMMA |
 		  (interlace ? SCALER_DISPBKGND_INTERLACE : 0));
@@ -451,7 +453,8 @@ static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
-	u32 chan = vc4_crtc->channel;
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(old_state);
+	u32 chan = vc4_crtc_state->assigned_channel;
 	int ret;
 	require_hvs_enabled(dev);
 
@@ -530,12 +533,12 @@ static void vc4_crtc_update_dlist(struct drm_crtc *crtc)
 			crtc->state->event = NULL;
 		}
 
-		HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+		HVS_WRITE(SCALER_DISPLISTX(vc4_state->assigned_channel),
 			  vc4_state->mm.start);
 
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 	} else {
-		HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+		HVS_WRITE(SCALER_DISPLISTX(vc4_state->assigned_channel),
 			  vc4_state->mm.start);
 	}
 }
@@ -584,7 +587,7 @@ static void vc4_crtc_atomic_enable(struct drm_crtc *crtc,
 			    (vc4_state->feed_txp ?
 					SCALER5_DISPCTRLX_ONESHOT : 0);
 
-	HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel), dispctrl);
+	HVS_WRITE(SCALER_DISPCTRLX(vc4_state->assigned_channel), dispctrl);
 
 	/* When feeding the transposer block the pixelvalve is unneeded and
 	 * should not be enabled.
@@ -700,7 +703,6 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 {
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
-	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
 	struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
 	struct drm_plane *plane;
 	struct vc4_plane_state *vc4_plane_state;
@@ -742,8 +744,8 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 		/* This sets a black background color fill, as is the case
 		 * with other DRM drivers.
 		 */
-		HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
-			  HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel)) |
+		HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel),
+			  HVS_READ(SCALER_DISPBKGNDX(vc4_state->assigned_channel)) |
 			  SCALER_DISPBKGND_FILL);
 
 	/* Only update DISPLIST if the CRTC was already running and is not
@@ -757,7 +759,7 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 		vc4_crtc_update_dlist(crtc);
 
 	if (crtc->state->color_mgmt_changed) {
-		u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel));
+		u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(vc4_state->assigned_channel));
 
 		if (crtc->state->gamma_lut) {
 			vc4_crtc_update_gamma_lut(crtc);
@@ -769,7 +771,7 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 			 */
 			dispbkgndx &= ~SCALER_DISPBKGND_GAMMA;
 		}
-		HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel), dispbkgndx);
+		HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel), dispbkgndx);
 	}
 
 	if (debug_dump_regs) {
@@ -800,7 +802,7 @@ static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc)
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
-	u32 chan = vc4_crtc->channel;
+	u32 chan = vc4_state->assigned_channel;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->event_lock, flags);
@@ -999,6 +1001,7 @@ static struct drm_crtc_state *vc4_crtc_duplicate_state(struct drm_crtc *crtc)
 	old_vc4_state = to_vc4_crtc_state(crtc->state);
 	vc4_state->feed_txp = old_vc4_state->feed_txp;
 	vc4_state->margins = old_vc4_state->margins;
+	vc4_state->assigned_channel = old_vc4_state->assigned_channel;
 
 	__drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base);
 	return &vc4_state->base;
@@ -1060,6 +1063,7 @@ static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv0_data = {
+	.hvs_available_channels = BIT(0),
 	.hvs_output = 0,
 	.debugfs_name = "crtc0_regs",
 	.pixels_per_clock = 1,
@@ -1070,6 +1074,7 @@ static const struct vc4_crtc_data bcm2835_pv0_data = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv1_data = {
+	.hvs_available_channels = BIT(2),
 	.hvs_output = 2,
 	.debugfs_name = "crtc1_regs",
 	.pixels_per_clock = 1,
@@ -1080,6 +1085,7 @@ static const struct vc4_crtc_data bcm2835_pv1_data = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv2_data = {
+	.hvs_available_channels = BIT(1),
 	.hvs_output = 1,
 	.debugfs_name = "crtc2_regs",
 	.pixels_per_clock = 1,
@@ -1171,7 +1177,6 @@ static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
 	drm_crtc_init_with_planes(drm, crtc, primary_plane, NULL,
 				  &vc4_crtc_funcs, NULL);
 	drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs);
-	vc4_crtc->channel = vc4_crtc->data->hvs_output;
 	drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r));
 	drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size);
 
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 9d120aae4af9..73156a53822f 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -450,6 +450,9 @@ to_vc4_encoder(struct drm_encoder *encoder)
 }
 
 struct vc4_crtc_data {
+	/* Which channels of the HVS can the output source from */
+	unsigned int hvs_available_channels;
+
 	/* Which output of the HVS this pixelvalve sources from. */
 	int hvs_output;
 
@@ -469,9 +472,6 @@ struct vc4_crtc {
 	/* Timestamp at start of vblank irq - unaffected by lock delays. */
 	ktime_t t_vblank;
 
-	/* Which HVS channel we're using for our CRTC. */
-	int channel;
-
 	u8 lut_r[256];
 	u8 lut_g[256];
 	u8 lut_b[256];
@@ -493,6 +493,7 @@ struct vc4_crtc_state {
 	struct drm_mm_node mm;
 	bool feed_txp;
 	bool txp_armed;
+	unsigned int assigned_channel;
 
 	struct {
 		unsigned int left;
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index 29b75b60d858..db00625c61dd 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -11,6 +11,8 @@
  * crtc, HDMI encoder).
  */
 
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
 #include <linux/clk.h>
 
 #include <drm/drm_atomic.h>
@@ -146,6 +148,72 @@ vc4_ctm_commit(struct vc4_dev *vc4, struct drm_atomic_state *state)
 		  VC4_SET_FIELD(ctm_state->fifo, SCALER_OLEDOFFS_DISPFIFO));
 }
 
+static void vc4_hvs_pv_muxing_commit(struct vc4_dev *vc4,
+				     struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	unsigned char dsp2_mux = 0;
+	unsigned char dsp3_mux = 3;
+	unsigned char dsp4_mux = 3;
+	unsigned char dsp5_mux = 3;
+	unsigned int i;
+	u32 reg;
+
+	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+		struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state);
+		struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+
+		if (!crtc_state->active)
+			continue;
+
+		switch (vc4_crtc->data->hvs_output) {
+		case 2:
+			dsp2_mux = (vc4_state->assigned_channel == 2) ? 0 : 1;
+			break;
+
+		case 3:
+			dsp3_mux = vc4_state->assigned_channel;
+			break;
+
+		case 4:
+			dsp4_mux = vc4_state->assigned_channel;
+			break;
+
+		case 5:
+			dsp5_mux = vc4_state->assigned_channel;
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	reg = HVS_READ(SCALER_DISPECTRL);
+	if (FIELD_GET(SCALER_DISPECTRL_DSP2_MUX_MASK, reg) != dsp2_mux)
+		HVS_WRITE(SCALER_DISPECTRL,
+			  (reg & ~SCALER_DISPECTRL_DSP2_MUX_MASK) |
+			  VC4_SET_FIELD(dsp2_mux, SCALER_DISPECTRL_DSP2_MUX));
+
+	reg = HVS_READ(SCALER_DISPCTRL);
+	if (FIELD_GET(SCALER_DISPCTRL_DSP3_MUX_MASK, reg) != dsp3_mux)
+		HVS_WRITE(SCALER_DISPCTRL,
+			  (reg & ~SCALER_DISPCTRL_DSP3_MUX_MASK) |
+			  VC4_SET_FIELD(dsp3_mux, SCALER_DISPCTRL_DSP3_MUX));
+
+	reg = HVS_READ(SCALER_DISPEOLN);
+	if (FIELD_GET(SCALER_DISPEOLN_DSP4_MUX_MASK, reg) != dsp4_mux)
+		HVS_WRITE(SCALER_DISPEOLN,
+			  (reg & ~SCALER_DISPEOLN_DSP4_MUX_MASK) |
+			  VC4_SET_FIELD(dsp4_mux, SCALER_DISPEOLN_DSP4_MUX));
+
+	reg = HVS_READ(SCALER_DISPDITHER);
+	if (FIELD_GET(SCALER_DISPDITHER_DSP5_MUX_MASK, reg) != dsp5_mux)
+		HVS_WRITE(SCALER_DISPDITHER,
+			  (reg & ~SCALER_DISPDITHER_DSP5_MUX_MASK) |
+			  VC4_SET_FIELD(dsp5_mux, SCALER_DISPDITHER_DSP5_MUX));
+}
+
 static void
 vc4_atomic_complete_commit(struct drm_atomic_state *state)
 {
@@ -156,11 +224,15 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
 	int i;
 
 	for (i = 0; i < dev->mode_config.num_crtc; i++) {
-		if (!state->crtcs[i].ptr || !state->crtcs[i].commit)
+		struct __drm_crtcs_state *_state = &state->crtcs[i];
+		struct vc4_crtc_state *vc4_crtc_state;
+
+		if (!_state->ptr || !_state->commit)
 			continue;
 
-		vc4_crtc = to_vc4_crtc(state->crtcs[i].ptr);
-		vc4_hvs_mask_underrun(dev, vc4_crtc->channel);
+		vc4_crtc = to_vc4_crtc(_state->ptr);
+		vc4_crtc_state = to_vc4_crtc_state(_state->state);
+		vc4_hvs_mask_underrun(dev, vc4_crtc_state->assigned_channel);
 	}
 
 	clk_set_rate(hvs->core_clk, 500000000);
@@ -172,6 +244,7 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
 	drm_atomic_helper_commit_modeset_disables(dev, state);
 
 	vc4_ctm_commit(vc4, state);
+	vc4_hvs_pv_muxing_commit(vc4, state);
 
 	drm_atomic_helper_commit_planes(dev, state, 0);
 
@@ -381,8 +454,11 @@ vc4_ctm_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
 
 		/* CTM is being enabled or the matrix changed. */
 		if (new_crtc_state->ctm) {
+			struct vc4_crtc_state *vc4_crtc_state =
+				to_vc4_crtc_state(new_crtc_state);
+
 			/* fifo is 1-based since 0 disables CTM. */
-			int fifo = to_vc4_crtc(crtc)->channel + 1;
+			int fifo = vc4_crtc_state->assigned_channel + 1;
 
 			/* Check userland isn't trying to turn on CTM for more
 			 * than one CRTC at a time.
@@ -495,10 +571,66 @@ static const struct drm_private_state_funcs vc4_load_tracker_state_funcs = {
 	.atomic_destroy_state = vc4_load_tracker_destroy_state,
 };
 
+#define NUM_OUTPUTS  6
+#define NUM_CHANNELS 3
+
 static int
 vc4_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
 {
-	int ret;
+	unsigned long unassigned_channels = GENMASK(NUM_CHANNELS - 1, 0);
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	int i, ret;
+
+	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+		struct vc4_crtc_state *vc4_crtc_state =
+			to_vc4_crtc_state(crtc_state);
+		struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+		bool is_assigned = false;
+		unsigned int channel;
+
+		if (!crtc_state->active)
+			continue;
+
+		/*
+		 * The problem we have to solve here is that we have
+		 * up to 7 encoders, connected to up to 6 CRTCs.
+		 *
+		 * Those CRTCs, depending on the instance, can be
+		 * routed to 1, 2 or 3 HVS FIFOs, and we need to set
+		 * the change the muxing between FIFOs and outputs in
+		 * the HVS accordingly.
+		 *
+		 * It would be pretty hard to come up with an
+		 * algorithm that would generically solve
+		 * this. However, the current routing trees we support
+		 * allow us to simplify a bit the problem.
+		 *
+		 * Indeed, with the current supported layouts, if we
+		 * try to assign in the ascending crtc index order the
+		 * FIFOs, we can't fall into the situation where an
+		 * earlier CRTC that had multiple routes is assigned
+		 * one that was the only option for a later CRTC.
+		 *
+		 * If the layout changes and doesn't give us that in
+		 * the future, we will need to have something smarter,
+		 * but it works so far.
+		 */
+		for_each_set_bit(channel, &unassigned_channels,
+				 sizeof(unassigned_channels)) {
+
+			if (!(BIT(channel) & vc4_crtc->data->hvs_available_channels))
+				continue;
+
+			vc4_crtc_state->assigned_channel = channel;
+			unassigned_channels &= ~BIT(channel);
+			is_assigned = true;
+			break;
+		}
+
+		if (!is_assigned)
+			return -EINVAL;
+	}
 
 	ret = vc4_ctm_atomic_check(dev, state);
 	if (ret < 0)
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 8a51baf681fe..b96ebbb1354b 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -287,9 +287,19 @@
 
 #define SCALER_DISPID                           0x00000008
 #define SCALER_DISPECTRL                        0x0000000c
+# define SCALER_DISPECTRL_DSP2_MUX_SHIFT	31
+# define SCALER_DISPECTRL_DSP2_MUX_MASK		VC4_MASK(31, 31)
+
 #define SCALER_DISPPROF                         0x00000010
+
 #define SCALER_DISPDITHER                       0x00000014
+# define SCALER_DISPDITHER_DSP5_MUX_SHIFT	30
+# define SCALER_DISPDITHER_DSP5_MUX_MASK	VC4_MASK(31, 30)
+
 #define SCALER_DISPEOLN                         0x00000018
+# define SCALER_DISPEOLN_DSP4_MUX_SHIFT		30
+# define SCALER_DISPEOLN_DSP4_MUX_MASK		VC4_MASK(31, 30)
+
 #define SCALER_DISPLIST0                        0x00000020
 #define SCALER_DISPLIST1                        0x00000024
 #define SCALER_DISPLIST2                        0x00000028
-- 
git-series 0.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Eric Anholt <eric@anholt.net>
Cc: Tim Gover <tim.gover@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	Phil Elwell <phil@raspberrypi.com>,
	linux-arm-kernel@lists.infradead.org,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v3 033/105] drm/vc4: crtc: Assign output to channel automatically
Date: Wed, 27 May 2020 17:48:03 +0200	[thread overview]
Message-ID: <5186409a2b5d290b78f6b518a2eb8e407bf1e83e.1590594512.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.aaf2100bd7da4609f8bcb8216247d4b4e4379639.1590594512.git-series.maxime@cerno.tech>

The HVS found in the BCM2711 has 6 outputs and 3 FIFOs, with each output
being connected to a pixelvalve, and some muxing between the FIFOs and
outputs.

Any output cannot feed from any FIFO though, and they all have a bunch of
constraints.

In order to support this, let's store the possible FIFOs each output can be
assigned to in the vc4_crtc_data, and use that information at atomic_check
time to iterate over all the CRTCs enabled and assign them FIFOs.

The channel assigned is then set in the vc4_crtc_state so that the rest of
the driver can use it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_crtc.c |  37 +++++----
 drivers/gpu/drm/vc4/vc4_drv.h  |   7 +-
 drivers/gpu/drm/vc4/vc4_kms.c  | 142 ++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/vc4/vc4_regs.h |  10 ++-
 4 files changed, 172 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 580b37ad514d..a6c3f2f907bd 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -88,6 +88,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(crtc->state);
 	unsigned int cob_size;
 	u32 val;
 	int fifo_lines;
@@ -104,7 +105,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc,
 	 * Read vertical scanline which is currently composed for our
 	 * pixelvalve by the HVS, and also the scaler status.
 	 */
-	val = HVS_READ(SCALER_DISPSTATX(vc4_crtc->channel));
+	val = HVS_READ(SCALER_DISPSTATX(vc4_crtc_state->assigned_channel));
 
 	/* Get optional system timestamp after query. */
 	if (etime)
@@ -124,7 +125,7 @@ static bool vc4_crtc_get_scanout_position(struct drm_crtc *crtc,
 			*hpos += mode->crtc_htotal / 2;
 	}
 
-	cob_size = vc4_crtc_get_cob_allocation(vc4, vc4_crtc->channel);
+	cob_size = vc4_crtc_get_cob_allocation(vc4, vc4_crtc_state->assigned_channel);
 	/* This is the offset we need for translating hvs -> pv scanout pos. */
 	fifo_lines = cob_size / mode->crtc_hdisplay;
 
@@ -211,6 +212,7 @@ vc4_crtc_lut_load(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(crtc->state);
 	u32 i;
 
 	/* The LUT memory is laid out with each HVS channel in order,
@@ -219,7 +221,7 @@ vc4_crtc_lut_load(struct drm_crtc *crtc)
 	 */
 	HVS_WRITE(SCALER_GAMADDR,
 		  SCALER_GAMADDR_AUTOINC |
-		  (vc4_crtc->channel * 3 * crtc->gamma_size));
+		  (vc4_crtc_state->assigned_channel * 3 * crtc->gamma_size));
 
 	for (i = 0; i < crtc->gamma_size; i++)
 		HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_r[i]);
@@ -392,7 +394,7 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 		drm_print_regset32(&p, &vc4_crtc->regset);
 	}
 
-	if (vc4_crtc->channel == 2) {
+	if (vc4_crtc->data->hvs_output == 2) {
 		u32 dispctrl;
 		u32 dsp3_mux;
 
@@ -419,7 +421,7 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 	if (!vc4_state->feed_txp)
 		vc4_crtc_config_pv(crtc);
 
-	HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
+	HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel),
 		  SCALER_DISPBKGND_AUTOHS |
 		  SCALER_DISPBKGND_GAMMA |
 		  (interlace ? SCALER_DISPBKGND_INTERLACE : 0));
@@ -451,7 +453,8 @@ static void vc4_crtc_atomic_disable(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
-	u32 chan = vc4_crtc->channel;
+	struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(old_state);
+	u32 chan = vc4_crtc_state->assigned_channel;
 	int ret;
 	require_hvs_enabled(dev);
 
@@ -530,12 +533,12 @@ static void vc4_crtc_update_dlist(struct drm_crtc *crtc)
 			crtc->state->event = NULL;
 		}
 
-		HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+		HVS_WRITE(SCALER_DISPLISTX(vc4_state->assigned_channel),
 			  vc4_state->mm.start);
 
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 	} else {
-		HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+		HVS_WRITE(SCALER_DISPLISTX(vc4_state->assigned_channel),
 			  vc4_state->mm.start);
 	}
 }
@@ -584,7 +587,7 @@ static void vc4_crtc_atomic_enable(struct drm_crtc *crtc,
 			    (vc4_state->feed_txp ?
 					SCALER5_DISPCTRLX_ONESHOT : 0);
 
-	HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel), dispctrl);
+	HVS_WRITE(SCALER_DISPCTRLX(vc4_state->assigned_channel), dispctrl);
 
 	/* When feeding the transposer block the pixelvalve is unneeded and
 	 * should not be enabled.
@@ -700,7 +703,6 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 {
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
-	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
 	struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
 	struct drm_plane *plane;
 	struct vc4_plane_state *vc4_plane_state;
@@ -742,8 +744,8 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 		/* This sets a black background color fill, as is the case
 		 * with other DRM drivers.
 		 */
-		HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
-			  HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel)) |
+		HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel),
+			  HVS_READ(SCALER_DISPBKGNDX(vc4_state->assigned_channel)) |
 			  SCALER_DISPBKGND_FILL);
 
 	/* Only update DISPLIST if the CRTC was already running and is not
@@ -757,7 +759,7 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 		vc4_crtc_update_dlist(crtc);
 
 	if (crtc->state->color_mgmt_changed) {
-		u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(vc4_crtc->channel));
+		u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(vc4_state->assigned_channel));
 
 		if (crtc->state->gamma_lut) {
 			vc4_crtc_update_gamma_lut(crtc);
@@ -769,7 +771,7 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
 			 */
 			dispbkgndx &= ~SCALER_DISPBKGND_GAMMA;
 		}
-		HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel), dispbkgndx);
+		HVS_WRITE(SCALER_DISPBKGNDX(vc4_state->assigned_channel), dispbkgndx);
 	}
 
 	if (debug_dump_regs) {
@@ -800,7 +802,7 @@ static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc)
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
-	u32 chan = vc4_crtc->channel;
+	u32 chan = vc4_state->assigned_channel;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->event_lock, flags);
@@ -999,6 +1001,7 @@ static struct drm_crtc_state *vc4_crtc_duplicate_state(struct drm_crtc *crtc)
 	old_vc4_state = to_vc4_crtc_state(crtc->state);
 	vc4_state->feed_txp = old_vc4_state->feed_txp;
 	vc4_state->margins = old_vc4_state->margins;
+	vc4_state->assigned_channel = old_vc4_state->assigned_channel;
 
 	__drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base);
 	return &vc4_state->base;
@@ -1060,6 +1063,7 @@ static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv0_data = {
+	.hvs_available_channels = BIT(0),
 	.hvs_output = 0,
 	.debugfs_name = "crtc0_regs",
 	.pixels_per_clock = 1,
@@ -1070,6 +1074,7 @@ static const struct vc4_crtc_data bcm2835_pv0_data = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv1_data = {
+	.hvs_available_channels = BIT(2),
 	.hvs_output = 2,
 	.debugfs_name = "crtc1_regs",
 	.pixels_per_clock = 1,
@@ -1080,6 +1085,7 @@ static const struct vc4_crtc_data bcm2835_pv1_data = {
 };
 
 static const struct vc4_crtc_data bcm2835_pv2_data = {
+	.hvs_available_channels = BIT(1),
 	.hvs_output = 1,
 	.debugfs_name = "crtc2_regs",
 	.pixels_per_clock = 1,
@@ -1171,7 +1177,6 @@ static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
 	drm_crtc_init_with_planes(drm, crtc, primary_plane, NULL,
 				  &vc4_crtc_funcs, NULL);
 	drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs);
-	vc4_crtc->channel = vc4_crtc->data->hvs_output;
 	drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r));
 	drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size);
 
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 9d120aae4af9..73156a53822f 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -450,6 +450,9 @@ to_vc4_encoder(struct drm_encoder *encoder)
 }
 
 struct vc4_crtc_data {
+	/* Which channels of the HVS can the output source from */
+	unsigned int hvs_available_channels;
+
 	/* Which output of the HVS this pixelvalve sources from. */
 	int hvs_output;
 
@@ -469,9 +472,6 @@ struct vc4_crtc {
 	/* Timestamp at start of vblank irq - unaffected by lock delays. */
 	ktime_t t_vblank;
 
-	/* Which HVS channel we're using for our CRTC. */
-	int channel;
-
 	u8 lut_r[256];
 	u8 lut_g[256];
 	u8 lut_b[256];
@@ -493,6 +493,7 @@ struct vc4_crtc_state {
 	struct drm_mm_node mm;
 	bool feed_txp;
 	bool txp_armed;
+	unsigned int assigned_channel;
 
 	struct {
 		unsigned int left;
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index 29b75b60d858..db00625c61dd 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -11,6 +11,8 @@
  * crtc, HDMI encoder).
  */
 
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
 #include <linux/clk.h>
 
 #include <drm/drm_atomic.h>
@@ -146,6 +148,72 @@ vc4_ctm_commit(struct vc4_dev *vc4, struct drm_atomic_state *state)
 		  VC4_SET_FIELD(ctm_state->fifo, SCALER_OLEDOFFS_DISPFIFO));
 }
 
+static void vc4_hvs_pv_muxing_commit(struct vc4_dev *vc4,
+				     struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	unsigned char dsp2_mux = 0;
+	unsigned char dsp3_mux = 3;
+	unsigned char dsp4_mux = 3;
+	unsigned char dsp5_mux = 3;
+	unsigned int i;
+	u32 reg;
+
+	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+		struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state);
+		struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+
+		if (!crtc_state->active)
+			continue;
+
+		switch (vc4_crtc->data->hvs_output) {
+		case 2:
+			dsp2_mux = (vc4_state->assigned_channel == 2) ? 0 : 1;
+			break;
+
+		case 3:
+			dsp3_mux = vc4_state->assigned_channel;
+			break;
+
+		case 4:
+			dsp4_mux = vc4_state->assigned_channel;
+			break;
+
+		case 5:
+			dsp5_mux = vc4_state->assigned_channel;
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	reg = HVS_READ(SCALER_DISPECTRL);
+	if (FIELD_GET(SCALER_DISPECTRL_DSP2_MUX_MASK, reg) != dsp2_mux)
+		HVS_WRITE(SCALER_DISPECTRL,
+			  (reg & ~SCALER_DISPECTRL_DSP2_MUX_MASK) |
+			  VC4_SET_FIELD(dsp2_mux, SCALER_DISPECTRL_DSP2_MUX));
+
+	reg = HVS_READ(SCALER_DISPCTRL);
+	if (FIELD_GET(SCALER_DISPCTRL_DSP3_MUX_MASK, reg) != dsp3_mux)
+		HVS_WRITE(SCALER_DISPCTRL,
+			  (reg & ~SCALER_DISPCTRL_DSP3_MUX_MASK) |
+			  VC4_SET_FIELD(dsp3_mux, SCALER_DISPCTRL_DSP3_MUX));
+
+	reg = HVS_READ(SCALER_DISPEOLN);
+	if (FIELD_GET(SCALER_DISPEOLN_DSP4_MUX_MASK, reg) != dsp4_mux)
+		HVS_WRITE(SCALER_DISPEOLN,
+			  (reg & ~SCALER_DISPEOLN_DSP4_MUX_MASK) |
+			  VC4_SET_FIELD(dsp4_mux, SCALER_DISPEOLN_DSP4_MUX));
+
+	reg = HVS_READ(SCALER_DISPDITHER);
+	if (FIELD_GET(SCALER_DISPDITHER_DSP5_MUX_MASK, reg) != dsp5_mux)
+		HVS_WRITE(SCALER_DISPDITHER,
+			  (reg & ~SCALER_DISPDITHER_DSP5_MUX_MASK) |
+			  VC4_SET_FIELD(dsp5_mux, SCALER_DISPDITHER_DSP5_MUX));
+}
+
 static void
 vc4_atomic_complete_commit(struct drm_atomic_state *state)
 {
@@ -156,11 +224,15 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
 	int i;
 
 	for (i = 0; i < dev->mode_config.num_crtc; i++) {
-		if (!state->crtcs[i].ptr || !state->crtcs[i].commit)
+		struct __drm_crtcs_state *_state = &state->crtcs[i];
+		struct vc4_crtc_state *vc4_crtc_state;
+
+		if (!_state->ptr || !_state->commit)
 			continue;
 
-		vc4_crtc = to_vc4_crtc(state->crtcs[i].ptr);
-		vc4_hvs_mask_underrun(dev, vc4_crtc->channel);
+		vc4_crtc = to_vc4_crtc(_state->ptr);
+		vc4_crtc_state = to_vc4_crtc_state(_state->state);
+		vc4_hvs_mask_underrun(dev, vc4_crtc_state->assigned_channel);
 	}
 
 	clk_set_rate(hvs->core_clk, 500000000);
@@ -172,6 +244,7 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
 	drm_atomic_helper_commit_modeset_disables(dev, state);
 
 	vc4_ctm_commit(vc4, state);
+	vc4_hvs_pv_muxing_commit(vc4, state);
 
 	drm_atomic_helper_commit_planes(dev, state, 0);
 
@@ -381,8 +454,11 @@ vc4_ctm_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
 
 		/* CTM is being enabled or the matrix changed. */
 		if (new_crtc_state->ctm) {
+			struct vc4_crtc_state *vc4_crtc_state =
+				to_vc4_crtc_state(new_crtc_state);
+
 			/* fifo is 1-based since 0 disables CTM. */
-			int fifo = to_vc4_crtc(crtc)->channel + 1;
+			int fifo = vc4_crtc_state->assigned_channel + 1;
 
 			/* Check userland isn't trying to turn on CTM for more
 			 * than one CRTC at a time.
@@ -495,10 +571,66 @@ static const struct drm_private_state_funcs vc4_load_tracker_state_funcs = {
 	.atomic_destroy_state = vc4_load_tracker_destroy_state,
 };
 
+#define NUM_OUTPUTS  6
+#define NUM_CHANNELS 3
+
 static int
 vc4_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
 {
-	int ret;
+	unsigned long unassigned_channels = GENMASK(NUM_CHANNELS - 1, 0);
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	int i, ret;
+
+	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+		struct vc4_crtc_state *vc4_crtc_state =
+			to_vc4_crtc_state(crtc_state);
+		struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+		bool is_assigned = false;
+		unsigned int channel;
+
+		if (!crtc_state->active)
+			continue;
+
+		/*
+		 * The problem we have to solve here is that we have
+		 * up to 7 encoders, connected to up to 6 CRTCs.
+		 *
+		 * Those CRTCs, depending on the instance, can be
+		 * routed to 1, 2 or 3 HVS FIFOs, and we need to set
+		 * the change the muxing between FIFOs and outputs in
+		 * the HVS accordingly.
+		 *
+		 * It would be pretty hard to come up with an
+		 * algorithm that would generically solve
+		 * this. However, the current routing trees we support
+		 * allow us to simplify a bit the problem.
+		 *
+		 * Indeed, with the current supported layouts, if we
+		 * try to assign in the ascending crtc index order the
+		 * FIFOs, we can't fall into the situation where an
+		 * earlier CRTC that had multiple routes is assigned
+		 * one that was the only option for a later CRTC.
+		 *
+		 * If the layout changes and doesn't give us that in
+		 * the future, we will need to have something smarter,
+		 * but it works so far.
+		 */
+		for_each_set_bit(channel, &unassigned_channels,
+				 sizeof(unassigned_channels)) {
+
+			if (!(BIT(channel) & vc4_crtc->data->hvs_available_channels))
+				continue;
+
+			vc4_crtc_state->assigned_channel = channel;
+			unassigned_channels &= ~BIT(channel);
+			is_assigned = true;
+			break;
+		}
+
+		if (!is_assigned)
+			return -EINVAL;
+	}
 
 	ret = vc4_ctm_atomic_check(dev, state);
 	if (ret < 0)
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 8a51baf681fe..b96ebbb1354b 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -287,9 +287,19 @@
 
 #define SCALER_DISPID                           0x00000008
 #define SCALER_DISPECTRL                        0x0000000c
+# define SCALER_DISPECTRL_DSP2_MUX_SHIFT	31
+# define SCALER_DISPECTRL_DSP2_MUX_MASK		VC4_MASK(31, 31)
+
 #define SCALER_DISPPROF                         0x00000010
+
 #define SCALER_DISPDITHER                       0x00000014
+# define SCALER_DISPDITHER_DSP5_MUX_SHIFT	30
+# define SCALER_DISPDITHER_DSP5_MUX_MASK	VC4_MASK(31, 30)
+
 #define SCALER_DISPEOLN                         0x00000018
+# define SCALER_DISPEOLN_DSP4_MUX_SHIFT		30
+# define SCALER_DISPEOLN_DSP4_MUX_MASK		VC4_MASK(31, 30)
+
 #define SCALER_DISPLIST0                        0x00000020
 #define SCALER_DISPLIST1                        0x00000024
 #define SCALER_DISPLIST2                        0x00000028
-- 
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-05-27 15:50 UTC|newest]

Thread overview: 453+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-27 15:47 [PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-05-27 15:47 ` Maxime Ripard
2020-05-27 15:47 ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 001/105] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 002/105] reset: simple: Add reset callback Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 16:03   ` Philipp Zabel
2020-05-27 16:03     ` Philipp Zabel
2020-05-27 16:03     ` Philipp Zabel
2020-05-27 15:47 ` [PATCH v3 003/105] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 004/105] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-06-04 17:26   ` Nicolas Saenz Julienne
2020-06-04 17:26     ` Nicolas Saenz Julienne
2020-06-04 17:26     ` Nicolas Saenz Julienne
2020-06-05 17:43     ` Maxime Ripard
2020-06-05 17:43       ` Maxime Ripard
2020-06-05 17:43       ` Maxime Ripard
2020-06-05 18:11       ` Nicolas Saenz Julienne
2020-06-05 18:11         ` Nicolas Saenz Julienne
2020-06-05 18:11         ` Nicolas Saenz Julienne
2020-06-05 17:56   ` Eric Anholt
2020-06-05 17:56     ` Eric Anholt
2020-06-05 17:56     ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 005/105] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 006/105] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 19:12   ` Rob Herring
2020-05-27 19:12     ` Rob Herring
2020-05-27 19:12     ` Rob Herring
2020-06-02 15:00     ` Maxime Ripard
2020-06-02 15:00       ` Maxime Ripard
2020-06-02 15:00       ` Maxime Ripard
2020-06-17 20:21   ` Rob Herring
2020-06-17 20:21     ` Rob Herring
2020-06-17 20:21     ` Rob Herring
2020-05-27 15:47 ` [PATCH v3 007/105] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 008/105] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 009/105] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 010/105] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 011/105] drm/vc4: drv: Add include guards Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 012/105] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 16:27   ` Eric Anholt
2020-05-27 16:27     ` Eric Anholt
2020-05-27 16:27     ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 013/105] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 014/105] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 015/105] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 16:33   ` Eric Anholt
2020-05-27 16:33     ` Eric Anholt
2020-05-27 16:33     ` Eric Anholt
2020-06-02 12:52     ` Maxime Ripard
2020-06-02 12:52       ` Maxime Ripard
2020-06-02 12:52       ` Maxime Ripard
2020-06-02 17:52       ` Eric Anholt
2020-06-02 17:52         ` Eric Anholt
2020-06-02 17:52         ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 016/105] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 16:44   ` Eric Anholt
2020-05-27 16:44     ` Eric Anholt
2020-05-27 16:44     ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 017/105] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 018/105] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 019/105] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 020/105] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 16:52   ` Eric Anholt
2020-05-27 16:52     ` Eric Anholt
2020-05-27 16:52     ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 021/105] drm/vc4: plane: Create more planes Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 022/105] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 023/105] drm/vc4: crtc: Switch to of_device_get_match_data Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 024/105] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 025/105] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 026/105] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 027/105] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 028/105] drm/vc4: crtc: Restrict HACT_ACT setup to DSI Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 029/105] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:47   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 030/105] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 031/105] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 032/105] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 16:54   ` Eric Anholt
2020-05-27 16:54     ` Eric Anholt
2020-05-27 16:54     ` Eric Anholt
2020-06-02 14:12     ` Maxime Ripard
2020-06-02 14:12       ` Maxime Ripard
2020-06-02 14:12       ` Maxime Ripard
2020-06-02 15:02       ` Dave Stevenson
2020-06-02 15:02         ` Dave Stevenson
2020-06-02 15:02         ` Dave Stevenson
2020-06-02 19:31         ` Eric Anholt
2020-06-02 19:31           ` Eric Anholt
2020-06-02 19:31           ` Eric Anholt
2020-06-02 20:03           ` Stefan Wahren
2020-06-02 20:03             ` Stefan Wahren
2020-06-02 20:03             ` Stefan Wahren
2020-06-03 13:14             ` Maxime Ripard
2020-06-03 13:14               ` Maxime Ripard
2020-06-03 13:14               ` Maxime Ripard
2020-06-03 15:26               ` Stefan Wahren
2020-06-03 15:26                 ` Stefan Wahren
2020-06-03 15:26                 ` Stefan Wahren
2020-06-12 15:35           ` Maxime Ripard
2020-06-12 15:35             ` Maxime Ripard
2020-06-12 15:35             ` Maxime Ripard
2020-05-27 15:48 ` Maxime Ripard [this message]
2020-05-27 15:48   ` [PATCH v3 033/105] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 17:23   ` Eric Anholt
2020-05-27 17:23     ` Eric Anholt
2020-05-27 17:23     ` Eric Anholt
2020-06-16 15:04     ` Maxime Ripard
2020-06-16 15:04       ` Maxime Ripard
2020-06-16 15:04       ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 034/105] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 035/105] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 036/105] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 037/105] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 038/105] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 039/105] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 040/105] drm/vc4: crtc: Turn pixelvalve reset into a function Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 17:30   ` Eric Anholt
2020-05-27 17:30     ` Eric Anholt
2020-05-27 17:30     ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 041/105] drm/vc4: crtc: Move HVS mode config to HVS file Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 18:26   ` Eric Anholt
2020-05-27 18:26     ` Eric Anholt
2020-05-27 18:26     ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 042/105] drm/vc4: crtc: Move PV dump to config_pv Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 043/105] drm/vc4: crtc: Move HVS init and close to a function Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 044/105] drm/vc4: crtc: Move the HVS gamma LUT setup to our init function Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 045/105] drm/vc4: hvs: Make sure our channel is reset Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 046/105] drm/vc4: hvs: Remove mode_set_nofb Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 047/105] drm/vc4: crtc: " Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 048/105] drm/vc4: crtc: Remove redundant pixelvalve reset Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 049/105] drm/vc4: crtc: Move HVS channel init before the PV initialisation Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 050/105] drm/vc4: encoder: Add finer-grained encoder callbacks Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 051/105] drm/vc4: crtc: Add a delay after disabling the PixelValve output Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 052/105] drm/vc4: crtc: Clear the PixelValve FIFO on disable Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 053/105] drm/vc4: crtc: Clear the PixelValve FIFO during configuration Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 054/105] drm/vc4: hvs: Make the stop_channel function public Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 055/105] drm/vc4: hvs: Introduce a function to get the assigned FIFO Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 19:40   ` Eric Anholt
2020-05-27 19:40     ` Eric Anholt
2020-05-27 19:40     ` Eric Anholt
2020-06-03  9:43     ` Maxime Ripard
2020-06-03  9:43       ` Maxime Ripard
2020-06-03  9:43       ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 056/105] drm/vc4: crtc: Move the CRTC disable out Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 057/105] drm/vc4: drv: Disable the CRTC at boot time Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 058/105] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 059/105] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 19:24   ` Eric Anholt
2020-05-27 19:24     ` Eric Anholt
2020-05-27 19:24     ` Eric Anholt
2020-05-27 15:48 ` [PATCH v3 060/105] drm/vc4: crtc: Make state functions public Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 061/105] drm/vc4: crtc: Split CRTC data in two Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 062/105] drm/vc4: crtc: Only access the PixelValve registers if we have to Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 063/105] drm/vc4: crtc: Move the CRTC initialisation to a separate function Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 064/105] drm/vc4: crtc: Change the HVS5 test for of_device_is_compatible Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 065/105] drm/vc4: crtc: Move the txp_armed function to the TXP Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 066/105] drm/vc4: txp: Turn the TXP into a CRTC of its own Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-28 15:51   ` Emil Velikov
2020-05-28 15:51     ` Emil Velikov
2020-05-28 15:51     ` Emil Velikov
2020-06-10 18:40     ` Maxime Ripard
2020-06-10 18:40       ` Maxime Ripard
2020-06-10 18:40       ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 067/105] drm/vc4: crtc: Remove the feed_txp tests Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 068/105] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 069/105] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 070/105] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 18:41   ` Eric Anholt
2020-05-27 18:41     ` Eric Anholt
2020-05-27 18:41     ` Eric Anholt
2020-06-02 15:54     ` Maxime Ripard
2020-06-02 15:54       ` Maxime Ripard
2020-06-02 15:54       ` Maxime Ripard
2020-06-03 17:32       ` Stefan Wahren
2020-06-03 17:32         ` Stefan Wahren
2020-06-03 17:32         ` Stefan Wahren
2020-06-05 14:35         ` Maxime Ripard
2020-06-05 14:35           ` Maxime Ripard
2020-06-05 14:35           ` Maxime Ripard
2020-06-06  8:06           ` Stefan Wahren
2020-06-06  8:06             ` Stefan Wahren
2020-06-06  8:06             ` Stefan Wahren
2020-06-11 13:34             ` Maxime Ripard
2020-06-11 13:34               ` Maxime Ripard
2020-06-11 13:34               ` Maxime Ripard
2020-06-14 16:16               ` Stefan Wahren
2020-06-14 16:16                 ` Stefan Wahren
2020-06-14 16:16                 ` Stefan Wahren
2020-06-16 12:30                 ` Maxime Ripard
2020-06-16 12:30                   ` Maxime Ripard
2020-06-16 12:30                   ` Maxime Ripard
2020-06-16 19:09                   ` Stefan Wahren
2020-06-16 19:09                     ` Stefan Wahren
2020-06-16 19:09                     ` Stefan Wahren
2020-05-27 15:48 ` [PATCH v3 071/105] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 072/105] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 073/105] drm/vc4: hdmi: Move accessors " Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 074/105] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 075/105] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 076/105] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 077/105] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 078/105] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 079/105] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 080/105] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 081/105] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 082/105] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 083/105] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 084/105] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 085/105] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 086/105] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 087/105] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 088/105] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 089/105] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:48   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 090/105] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 091/105] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 092/105] drm/vc4: hdmi: Use clk_set_min_rate instead Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 093/105] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 094/105] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 095/105] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 096/105] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 097/105] drm/vc4: hdmi: Deal with multiple ALSA cards Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 098/105] drm/vc4: hdmi: Remove register dumps in enable Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 099/105] drm/vc4: hdmi: Always recenter the HDMI FIFO Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 100/105] drm/vc4: hdmi: Implement finer-grained hooks Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 101/105] drm/vc4: hdmi: Do the VID_CTL configuration at once Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 102/105] drm/vc4: hdmi: Switch to blank pixels when disabled Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 103/105] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 104/105] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-29 18:18   ` Rob Herring
2020-05-29 18:18     ` Rob Herring
2020-05-29 18:18     ` Rob Herring
2020-06-02 15:08     ` Maxime Ripard
2020-06-02 15:08       ` Maxime Ripard
2020-06-02 15:08       ` Maxime Ripard
2020-06-08 23:01       ` Rob Herring
2020-06-08 23:01         ` Rob Herring
2020-06-08 23:01         ` Rob Herring
2020-05-27 15:49 ` [PATCH v3 105/105] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-05-27 15:49   ` Maxime Ripard
2020-06-03 20:11   ` Stefan Wahren
2020-06-03 20:11     ` Stefan Wahren
2020-06-03 20:11     ` Stefan Wahren
2020-06-02 20:12 ` [PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline Stefan Wahren
2020-06-02 20:12   ` Stefan Wahren
2020-06-02 20:12   ` Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5186409a2b5d290b78f6b518a2eb8e407bf1e83e.1590594512.git-series.maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=nsaenzjulienne@suse.de \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.