* [PATCH 0/4] FB updates for 3.11
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: Florian Tobias Schandinat
Cc: vt8500-wm8505-linux-kernel, linux-arm-kernel, linux-kernel,
tomi.valkeinen, linux-fbdev, Tony Prisk
Patch #1 - Move register defines inside the driver and drop the header.
Patch #2 - Convert the register defines to use the vendor preferred names.
Patch #3 - Add a device clock to wm8505fb. Without it, only the uboot
initialized resolution is supported.
Patch #4 - Add support for the VGA output found on the APC8750 board.
Tony Prisk (4):
fb: vt8500: Move register defines inside driver
fb: vt8500: Convert to use vendor register names
fb: vt8500: Require a device clock for wm8505fb driver
fb: vt8500: Add VGA output support to wm8505fb driver.
.../devicetree/bindings/video/wm,wm8505-fb.txt | 9 +-
drivers/video/wm8505fb.c | 195 ++++++++++++--
drivers/video/wm8505fb_regs.h | 76 ------
drivers/video/wmt_ge_rops.c | 280 +++++++++++++++-----
4 files changed, 394 insertions(+), 166 deletions(-)
delete mode 100644 drivers/video/wm8505fb_regs.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 0/4] FB updates for 3.11
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: linux-arm-kernel
Patch #1 - Move register defines inside the driver and drop the header.
Patch #2 - Convert the register defines to use the vendor preferred names.
Patch #3 - Add a device clock to wm8505fb. Without it, only the uboot
initialized resolution is supported.
Patch #4 - Add support for the VGA output found on the APC8750 board.
Tony Prisk (4):
fb: vt8500: Move register defines inside driver
fb: vt8500: Convert to use vendor register names
fb: vt8500: Require a device clock for wm8505fb driver
fb: vt8500: Add VGA output support to wm8505fb driver.
.../devicetree/bindings/video/wm,wm8505-fb.txt | 9 +-
drivers/video/wm8505fb.c | 195 ++++++++++++--
drivers/video/wm8505fb_regs.h | 76 ------
drivers/video/wmt_ge_rops.c | 280 +++++++++++++++-----
4 files changed, 394 insertions(+), 166 deletions(-)
delete mode 100644 drivers/video/wm8505fb_regs.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 0/4] FB updates for 3.11
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: linux-arm-kernel
Patch #1 - Move register defines inside the driver and drop the header.
Patch #2 - Convert the register defines to use the vendor preferred names.
Patch #3 - Add a device clock to wm8505fb. Without it, only the uboot
initialized resolution is supported.
Patch #4 - Add support for the VGA output found on the APC8750 board.
Tony Prisk (4):
fb: vt8500: Move register defines inside driver
fb: vt8500: Convert to use vendor register names
fb: vt8500: Require a device clock for wm8505fb driver
fb: vt8500: Add VGA output support to wm8505fb driver.
.../devicetree/bindings/video/wm,wm8505-fb.txt | 9 +-
drivers/video/wm8505fb.c | 195 ++++++++++++--
drivers/video/wm8505fb_regs.h | 76 ------
drivers/video/wmt_ge_rops.c | 280 +++++++++++++++-----
4 files changed, 394 insertions(+), 166 deletions(-)
delete mode 100644 drivers/video/wm8505fb_regs.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 1/4] fb: vt8500: Move register defines inside driver
2013-05-18 9:15 ` Tony Prisk
(?)
@ 2013-05-18 9:15 ` Tony Prisk
-1 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: Florian Tobias Schandinat
Cc: vt8500-wm8505-linux-kernel, linux-arm-kernel, linux-kernel,
tomi.valkeinen, linux-fbdev, Tony Prisk
The #defines in wm8505fb_regs.h are only used in the wm8505fb driver,
and don't need to be visible outside.
Move the defines into the driver and remove the header.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
drivers/video/wm8505fb.c | 25 +++++++++++++-
drivers/video/wm8505fb_regs.h | 76 -----------------------------------------
2 files changed, 24 insertions(+), 77 deletions(-)
delete mode 100644 drivers/video/wm8505fb_regs.h
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 01f9ace..f824af8 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -34,11 +34,34 @@
#include <linux/wait.h>
#include <video/of_display_timing.h>
-#include "wm8505fb_regs.h"
#include "wmt_ge_rops.h"
#define DRIVER_NAME "wm8505-fb"
+#define WMT_GOVR_COLORSPACE1 0x030
+#define WMT_GOVR_MIF_ENABLE 0x080
+#define WMT_GOVR_FBADDR 0x090
+#define WMT_GOVR_FBADDR1 0x094
+#define WMT_GOVR_XRES 0x098
+#define WMT_GOVR_XRES_VIRTUAL 0x09c
+#define WMT_GOVR_YPAN 0x0a0
+#define WMT_GOVR_XPAN 0x0a4
+#define WMT_GOVR_FHI 0x0a8
+#define WMT_GOVR_REG_UPDATE 0x0e4
+#define WMT_GOVR_TG 0x100
+#define WMT_GOVR_TIMING_H_ALL 0x108
+#define WMT_GOVR_TIMING_V_ALL 0x10c
+#define WMT_GOVR_TIMING_V_START 0x110
+#define WMT_GOVR_TIMING_V_END 0x114
+#define WMT_GOVR_TIMING_H_START 0x118
+#define WMT_GOVR_TIMING_H_END 0x11c
+#define WMT_GOVR_TIMING_V_SYNC 0x128
+#define WMT_GOVR_TIMING_H_SYNC 0x12c
+#define WMT_GOVR_DVO_SET 0x148
+#define WMT_GOVR_CONTRAST 0x1b8
+#define WMT_GOVR_BRGHTNESS 0x1bc
+#define WMT_GOVR_COLORSPACE 0x1e4
+
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
struct wm8505fb_info {
diff --git a/drivers/video/wm8505fb_regs.h b/drivers/video/wm8505fb_regs.h
deleted file mode 100644
index 4dd4166..0000000
--- a/drivers/video/wm8505fb_regs.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * GOVR registers list for WM8505 chips
- *
- * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- * Based on VIA/WonderMedia wm8510-govrh-reg.h
- * http://github.com/projectgus/kernel_wm8505/blob/wm8505_2.6.29/
- * drivers/video/wmt/register/wm8510/wm8510-govrh-reg.h
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _WM8505FB_REGS_H
-#define _WM8505FB_REGS_H
-
-/*
- * Color space select register, default value 0x1c
- * BIT0 GOVRH_DVO_YUV2RGB_ENABLE
- * BIT1 GOVRH_VGA_YUV2RGB_ENABLE
- * BIT2 GOVRH_RGB_MODE
- * BIT3 GOVRH_DAC_CLKINV
- * BIT4 GOVRH_BLANK_ZERO
- */
-#define WMT_GOVR_COLORSPACE 0x1e4
-/*
- * Another colorspace select register, default value 1
- * BIT0 GOVRH_DVO_RGB
- * BIT1 GOVRH_DVO_YUV422
- */
-#define WMT_GOVR_COLORSPACE1 0x30
-
-#define WMT_GOVR_CONTRAST 0x1b8
-#define WMT_GOVR_BRGHTNESS 0x1bc /* incompatible with RGB? */
-
-/* Framubeffer address */
-#define WMT_GOVR_FBADDR 0x90
-#define WMT_GOVR_FBADDR1 0x94 /* UV offset in YUV mode */
-
-/* Offset of visible window */
-#define WMT_GOVR_XPAN 0xa4
-#define WMT_GOVR_YPAN 0xa0
-
-#define WMT_GOVR_XRES 0x98
-#define WMT_GOVR_XRES_VIRTUAL 0x9c
-
-#define WMT_GOVR_MIF_ENABLE 0x80
-#define WMT_GOVR_FHI 0xa8
-#define WMT_GOVR_REG_UPDATE 0xe4
-
-/*
- * BIT0 GOVRH_DVO_OUTWIDTH
- * BIT1 GOVRH_DVO_SYNC_POLAR
- * BIT2 GOVRH_DVO_ENABLE
- */
-#define WMT_GOVR_DVO_SET 0x148
-
-/* Timing generator? */
-#define WMT_GOVR_TG 0x100
-
-/* Timings */
-#define WMT_GOVR_TIMING_H_ALL 0x108
-#define WMT_GOVR_TIMING_V_ALL 0x10c
-#define WMT_GOVR_TIMING_V_START 0x110
-#define WMT_GOVR_TIMING_V_END 0x114
-#define WMT_GOVR_TIMING_H_START 0x118
-#define WMT_GOVR_TIMING_H_END 0x11c
-#define WMT_GOVR_TIMING_V_SYNC 0x128
-#define WMT_GOVR_TIMING_H_SYNC 0x12c
-
-#endif /* _WM8505FB_REGS_H */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 1/4] fb: vt8500: Move register defines inside driver
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: linux-arm-kernel
The #defines in wm8505fb_regs.h are only used in the wm8505fb driver,
and don't need to be visible outside.
Move the defines into the driver and remove the header.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
drivers/video/wm8505fb.c | 25 +++++++++++++-
drivers/video/wm8505fb_regs.h | 76 -----------------------------------------
2 files changed, 24 insertions(+), 77 deletions(-)
delete mode 100644 drivers/video/wm8505fb_regs.h
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 01f9ace..f824af8 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -34,11 +34,34 @@
#include <linux/wait.h>
#include <video/of_display_timing.h>
-#include "wm8505fb_regs.h"
#include "wmt_ge_rops.h"
#define DRIVER_NAME "wm8505-fb"
+#define WMT_GOVR_COLORSPACE1 0x030
+#define WMT_GOVR_MIF_ENABLE 0x080
+#define WMT_GOVR_FBADDR 0x090
+#define WMT_GOVR_FBADDR1 0x094
+#define WMT_GOVR_XRES 0x098
+#define WMT_GOVR_XRES_VIRTUAL 0x09c
+#define WMT_GOVR_YPAN 0x0a0
+#define WMT_GOVR_XPAN 0x0a4
+#define WMT_GOVR_FHI 0x0a8
+#define WMT_GOVR_REG_UPDATE 0x0e4
+#define WMT_GOVR_TG 0x100
+#define WMT_GOVR_TIMING_H_ALL 0x108
+#define WMT_GOVR_TIMING_V_ALL 0x10c
+#define WMT_GOVR_TIMING_V_START 0x110
+#define WMT_GOVR_TIMING_V_END 0x114
+#define WMT_GOVR_TIMING_H_START 0x118
+#define WMT_GOVR_TIMING_H_END 0x11c
+#define WMT_GOVR_TIMING_V_SYNC 0x128
+#define WMT_GOVR_TIMING_H_SYNC 0x12c
+#define WMT_GOVR_DVO_SET 0x148
+#define WMT_GOVR_CONTRAST 0x1b8
+#define WMT_GOVR_BRGHTNESS 0x1bc
+#define WMT_GOVR_COLORSPACE 0x1e4
+
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
struct wm8505fb_info {
diff --git a/drivers/video/wm8505fb_regs.h b/drivers/video/wm8505fb_regs.h
deleted file mode 100644
index 4dd4166..0000000
--- a/drivers/video/wm8505fb_regs.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * GOVR registers list for WM8505 chips
- *
- * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- * Based on VIA/WonderMedia wm8510-govrh-reg.h
- * http://github.com/projectgus/kernel_wm8505/blob/wm8505_2.6.29/
- * drivers/video/wmt/register/wm8510/wm8510-govrh-reg.h
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _WM8505FB_REGS_H
-#define _WM8505FB_REGS_H
-
-/*
- * Color space select register, default value 0x1c
- * BIT0 GOVRH_DVO_YUV2RGB_ENABLE
- * BIT1 GOVRH_VGA_YUV2RGB_ENABLE
- * BIT2 GOVRH_RGB_MODE
- * BIT3 GOVRH_DAC_CLKINV
- * BIT4 GOVRH_BLANK_ZERO
- */
-#define WMT_GOVR_COLORSPACE 0x1e4
-/*
- * Another colorspace select register, default value 1
- * BIT0 GOVRH_DVO_RGB
- * BIT1 GOVRH_DVO_YUV422
- */
-#define WMT_GOVR_COLORSPACE1 0x30
-
-#define WMT_GOVR_CONTRAST 0x1b8
-#define WMT_GOVR_BRGHTNESS 0x1bc /* incompatible with RGB? */
-
-/* Framubeffer address */
-#define WMT_GOVR_FBADDR 0x90
-#define WMT_GOVR_FBADDR1 0x94 /* UV offset in YUV mode */
-
-/* Offset of visible window */
-#define WMT_GOVR_XPAN 0xa4
-#define WMT_GOVR_YPAN 0xa0
-
-#define WMT_GOVR_XRES 0x98
-#define WMT_GOVR_XRES_VIRTUAL 0x9c
-
-#define WMT_GOVR_MIF_ENABLE 0x80
-#define WMT_GOVR_FHI 0xa8
-#define WMT_GOVR_REG_UPDATE 0xe4
-
-/*
- * BIT0 GOVRH_DVO_OUTWIDTH
- * BIT1 GOVRH_DVO_SYNC_POLAR
- * BIT2 GOVRH_DVO_ENABLE
- */
-#define WMT_GOVR_DVO_SET 0x148
-
-/* Timing generator? */
-#define WMT_GOVR_TG 0x100
-
-/* Timings */
-#define WMT_GOVR_TIMING_H_ALL 0x108
-#define WMT_GOVR_TIMING_V_ALL 0x10c
-#define WMT_GOVR_TIMING_V_START 0x110
-#define WMT_GOVR_TIMING_V_END 0x114
-#define WMT_GOVR_TIMING_H_START 0x118
-#define WMT_GOVR_TIMING_H_END 0x11c
-#define WMT_GOVR_TIMING_V_SYNC 0x128
-#define WMT_GOVR_TIMING_H_SYNC 0x12c
-
-#endif /* _WM8505FB_REGS_H */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 1/4] fb: vt8500: Move register defines inside driver
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: linux-arm-kernel
The #defines in wm8505fb_regs.h are only used in the wm8505fb driver,
and don't need to be visible outside.
Move the defines into the driver and remove the header.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
drivers/video/wm8505fb.c | 25 +++++++++++++-
drivers/video/wm8505fb_regs.h | 76 -----------------------------------------
2 files changed, 24 insertions(+), 77 deletions(-)
delete mode 100644 drivers/video/wm8505fb_regs.h
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 01f9ace..f824af8 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -34,11 +34,34 @@
#include <linux/wait.h>
#include <video/of_display_timing.h>
-#include "wm8505fb_regs.h"
#include "wmt_ge_rops.h"
#define DRIVER_NAME "wm8505-fb"
+#define WMT_GOVR_COLORSPACE1 0x030
+#define WMT_GOVR_MIF_ENABLE 0x080
+#define WMT_GOVR_FBADDR 0x090
+#define WMT_GOVR_FBADDR1 0x094
+#define WMT_GOVR_XRES 0x098
+#define WMT_GOVR_XRES_VIRTUAL 0x09c
+#define WMT_GOVR_YPAN 0x0a0
+#define WMT_GOVR_XPAN 0x0a4
+#define WMT_GOVR_FHI 0x0a8
+#define WMT_GOVR_REG_UPDATE 0x0e4
+#define WMT_GOVR_TG 0x100
+#define WMT_GOVR_TIMING_H_ALL 0x108
+#define WMT_GOVR_TIMING_V_ALL 0x10c
+#define WMT_GOVR_TIMING_V_START 0x110
+#define WMT_GOVR_TIMING_V_END 0x114
+#define WMT_GOVR_TIMING_H_START 0x118
+#define WMT_GOVR_TIMING_H_END 0x11c
+#define WMT_GOVR_TIMING_V_SYNC 0x128
+#define WMT_GOVR_TIMING_H_SYNC 0x12c
+#define WMT_GOVR_DVO_SET 0x148
+#define WMT_GOVR_CONTRAST 0x1b8
+#define WMT_GOVR_BRGHTNESS 0x1bc
+#define WMT_GOVR_COLORSPACE 0x1e4
+
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
struct wm8505fb_info {
diff --git a/drivers/video/wm8505fb_regs.h b/drivers/video/wm8505fb_regs.h
deleted file mode 100644
index 4dd4166..0000000
--- a/drivers/video/wm8505fb_regs.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * GOVR registers list for WM8505 chips
- *
- * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- * Based on VIA/WonderMedia wm8510-govrh-reg.h
- * http://github.com/projectgus/kernel_wm8505/blob/wm8505_2.6.29/
- * drivers/video/wmt/register/wm8510/wm8510-govrh-reg.h
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _WM8505FB_REGS_H
-#define _WM8505FB_REGS_H
-
-/*
- * Color space select register, default value 0x1c
- * BIT0 GOVRH_DVO_YUV2RGB_ENABLE
- * BIT1 GOVRH_VGA_YUV2RGB_ENABLE
- * BIT2 GOVRH_RGB_MODE
- * BIT3 GOVRH_DAC_CLKINV
- * BIT4 GOVRH_BLANK_ZERO
- */
-#define WMT_GOVR_COLORSPACE 0x1e4
-/*
- * Another colorspace select register, default value 1
- * BIT0 GOVRH_DVO_RGB
- * BIT1 GOVRH_DVO_YUV422
- */
-#define WMT_GOVR_COLORSPACE1 0x30
-
-#define WMT_GOVR_CONTRAST 0x1b8
-#define WMT_GOVR_BRGHTNESS 0x1bc /* incompatible with RGB? */
-
-/* Framubeffer address */
-#define WMT_GOVR_FBADDR 0x90
-#define WMT_GOVR_FBADDR1 0x94 /* UV offset in YUV mode */
-
-/* Offset of visible window */
-#define WMT_GOVR_XPAN 0xa4
-#define WMT_GOVR_YPAN 0xa0
-
-#define WMT_GOVR_XRES 0x98
-#define WMT_GOVR_XRES_VIRTUAL 0x9c
-
-#define WMT_GOVR_MIF_ENABLE 0x80
-#define WMT_GOVR_FHI 0xa8
-#define WMT_GOVR_REG_UPDATE 0xe4
-
-/*
- * BIT0 GOVRH_DVO_OUTWIDTH
- * BIT1 GOVRH_DVO_SYNC_POLAR
- * BIT2 GOVRH_DVO_ENABLE
- */
-#define WMT_GOVR_DVO_SET 0x148
-
-/* Timing generator? */
-#define WMT_GOVR_TG 0x100
-
-/* Timings */
-#define WMT_GOVR_TIMING_H_ALL 0x108
-#define WMT_GOVR_TIMING_V_ALL 0x10c
-#define WMT_GOVR_TIMING_V_START 0x110
-#define WMT_GOVR_TIMING_V_END 0x114
-#define WMT_GOVR_TIMING_H_START 0x118
-#define WMT_GOVR_TIMING_H_END 0x11c
-#define WMT_GOVR_TIMING_V_SYNC 0x128
-#define WMT_GOVR_TIMING_H_SYNC 0x12c
-
-#endif /* _WM8505FB_REGS_H */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 2/4] fb: vt8500: Convert to use vendor register names
2013-05-18 9:15 ` Tony Prisk
(?)
@ 2013-05-18 9:15 ` Tony Prisk
-1 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: Florian Tobias Schandinat
Cc: vt8500-wm8505-linux-kernel, linux-arm-kernel, linux-kernel,
tomi.valkeinen, linux-fbdev, Tony Prisk
Change all the #defines to match the vendor defined names, and change the
references in wm8505fb.c and wmt_ge_rops.c.
Add all the missing register offsets as well to prevent churn in the future.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
drivers/video/wm8505fb.c | 159 ++++++++++++++++--------
drivers/video/wmt_ge_rops.c | 280 +++++++++++++++++++++++++++++++++----------
2 files changed, 332 insertions(+), 107 deletions(-)
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index f824af8..167a9e2 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -38,29 +38,94 @@
#define DRIVER_NAME "wm8505-fb"
-#define WMT_GOVR_COLORSPACE1 0x030
-#define WMT_GOVR_MIF_ENABLE 0x080
-#define WMT_GOVR_FBADDR 0x090
-#define WMT_GOVR_FBADDR1 0x094
-#define WMT_GOVR_XRES 0x098
-#define WMT_GOVR_XRES_VIRTUAL 0x09c
-#define WMT_GOVR_YPAN 0x0a0
-#define WMT_GOVR_XPAN 0x0a4
-#define WMT_GOVR_FHI 0x0a8
-#define WMT_GOVR_REG_UPDATE 0x0e4
-#define WMT_GOVR_TG 0x100
-#define WMT_GOVR_TIMING_H_ALL 0x108
-#define WMT_GOVR_TIMING_V_ALL 0x10c
-#define WMT_GOVR_TIMING_V_START 0x110
-#define WMT_GOVR_TIMING_V_END 0x114
-#define WMT_GOVR_TIMING_H_START 0x118
-#define WMT_GOVR_TIMING_H_END 0x11c
-#define WMT_GOVR_TIMING_V_SYNC 0x128
-#define WMT_GOVR_TIMING_H_SYNC 0x12c
-#define WMT_GOVR_DVO_SET 0x148
-#define WMT_GOVR_CONTRAST 0x1b8
-#define WMT_GOVR_BRGHTNESS 0x1bc
-#define WMT_GOVR_COLORSPACE 0x1e4
+#define REG_GOVRH_CUR_ADDR 0x0000
+#define REG_GOVRH_CUR_WIDTH 0x0004
+#define REG_GOVRH_CUR_FB_WIDTH 0x0008
+#define REG_GOVRH_CUR_VCROP 0x000C
+#define REG_GOVRH_CUR_HCROP 0x0010
+#define REG_GOVRH_CUR_HCOORD 0x0014
+#define REG_GOVRH_CUR_VCOORD 0x0018
+#define REG_GOVRH_CUR_STATUS 0x001C
+#define REG_GOVRH_CUR_COLOR_KEY 0x0020
+#define REG_GOVRH_DVO_PIX 0x0030
+#define REG_GOVRH_DVO_DLY_SEL 0x0034
+#define REG_GOVRH_INT 0x0038
+#define REG_GOVRH_DVO_BLANK_DATA 0x003C
+#define REG_GOVRH_DIRPATH 0x0040 /* WM8750+ */
+#define REG_GOVRH_MIF 0x0080
+#define REG_GOVRH_COLFMT 0x0084
+#define REG_GOVRH_SRCFMT 0x0088
+#define REG_GOVRH_DSTFMT 0x008C
+#define REG_GOVRH_YSA 0x0090
+#define REG_GOVRH_CSA 0x0094
+#define REG_GOVRH_PIXWID 0x0098
+#define REG_GOVRH_BUFWID 0x009C
+#define REG_GOVRH_VCROP 0x00A0
+#define REG_GOVRH_HCROP 0x00A4
+#define REG_GOVRH_FHI 0x00A8
+#define REG_GOVRH_COLFMT2 0x00AC
+#define REG_GOVRH_YSA2 0x00B0 /* WM8950 */
+#define REG_GOVRH_CSA2 0x00B4 /* WM8950 */
+#define REG_GOVRH_MIF_FRAME_MODE 0x00B8 /* WM8950 */
+#define REG_GOVRH_REG_STS 0x00E4
+#define REG_GOVRH_SWFLD 0x00E8
+#define REG_GOVRH_TG_ENABLE 0x0100
+#define REG_GOVRH_READ_CYC 0x0104
+#define REG_GOVRH_H_ALLPXL 0x0108
+#define REG_GOVRH_V_ALLLN 0x010C
+#define REG_GOVRH_ACTLN_BG 0x0110
+#define REG_GOVRH_ACTLN_END 0x0114
+#define REG_GOVRH_ACTPX_BG 0x0118
+#define REG_GOVRH_ACTPX_END 0x011C
+#define REG_GOVRH_VBIE_LINE 0x0120
+#define REG_GOVRH_PVBI_LINE 0x0124
+#define REG_GOVRH_HDMI_VBISW 0x0128
+#define REG_GOVRH_HDMI_HSYNW 0x012C
+#define REG_GOVRH_VSYNC_OFFSET 0x0130
+#define REG_GOVRH_FIELD_STATUS 0x0134
+#define REG_GOVRH_HDMI_3D 0x013C /* WM8950 */
+#define REG_GOVRH_DVO_SET 0x0148
+#define REG_GOVRH_CB_ENABLE 0x0150
+#define REG_GOVRH_H_ALLPXL2 0x0158
+#define REG_GOVRH_V_ALLLN2 0x015C
+#define REG_GOVRH_ACTLN_BG2 0x0160
+#define REG_GOVRH_ACTLN_END2 0x0164
+#define REG_GOVRH_ACTPX_BG2 0x0168
+#define REG_GOVRH_ACTPX_END2 0x016C
+#define REG_GOVRH_VBIE_LINE2 0x0170
+#define REG_GOVRH_PVBI_LINE2 0x0174
+#define REG_GOVRH_HDMI_VBISW2 0x0178
+#define REG_GOVRH_HDMI_HSYNW2 0x017C
+#define REG_GOVRH_LVDS_CTRL 0x0180 /* WM8750+ */
+#define REG_GOVRH_LVDS_CTRL2 0x0184 /* WM8750+ */
+#define REG_GOVRH_DAC_LP_SENSE_VAL 0x0188 /* WM8750 */
+#define REG_GOVRH_DAC_TEST_MODE 0x018C /* WM8750 */
+#define REG_GOVRH_VGA_HSYNW 0x0190 /* WM8750 */
+#define REG_GOVRH_VGA_VSYNW 0x0194 /* WM8750 */
+#define REG_GOVRH_VGA_SYNPOLAR 0x0198 /* WM8750 */
+#define REG_GOVRH_DAC_MOD 0x019C /* WM8750 */
+#define REG_GOVRH_DAC_VAL 0x01A0 /* WM8750 */
+#define REG_GOVRH_DAC_CON 0x01A4 /* WM8750 */
+#define REG_GOVRH_DAC_TEST 0x01A8 /* WM8750 */
+#define REG_GOVRH_DAC_BTEST 0x01AC /* WM8750 */
+#define REG_GOVRH_DAC_CTEST 0x01B0 /* WM8750 */
+#define REG_GOVRH_DAC_DBG 0x01B4 /* WM8750 */
+#define REG_GOVRH_CONTRAST 0x01B8
+#define REG_GOVRH_BRIGHTNESS 0x01BC
+#define REG_GOVRH_DMACSC_COEF0 0x01C0
+#define REG_GOVRH_DMACSC_COEF1 0x01C4
+#define REG_GOVRH_DMACSC_COEF2 0x01C8
+#define REG_GOVRH_DMACSC_COEF3 0x01CC
+#define REG_GOVRH_DMACSC_COEF4 0x01D0
+#define REG_GOVRH_DMACSC_COEF5 0x01D8
+#define REG_GOVRH_DMACSC_COEF6 0x01DC
+#define REG_GOVRH_CSC_MODE 0x01E0
+#define REG_GOVRH_YUVRGB 0x01E4
+#define REG_GOVRH_H264_INPUT_EN 0x01E8
+#define REG_GOVRH_DISP_EN 0x01EC /* WM8750 */
+#define REG_GOVRH_HSCALE_UP 0x01F4
+#define REG_GOVRH_IGS_MODE 0x01F8
+#define REG_GOVRH_IGS_MODE2 0x01FC
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
@@ -82,26 +147,26 @@ static int wm8505fb_init_hw(struct fb_info *info)
writel(0, fbi->regbase + i);
/* Set frame buffer address */
- writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR);
- writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR1);
+ writel(fbi->fb.fix.smem_start, fbi->regbase + REG_GOVRH_YSA);
+ writel(fbi->fb.fix.smem_start, fbi->regbase + REG_GOVRH_CSA);
/*
* Set in-memory picture format to RGB
* 0x31C sets the correct color mode (RGB565) for WM8650
* Bit 8+9 (0x300) are ignored on WM8505 as reserved
*/
- writel(0x31c, fbi->regbase + WMT_GOVR_COLORSPACE);
- writel(1, fbi->regbase + WMT_GOVR_COLORSPACE1);
+ writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
+ writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
/* Virtual buffer size */
- writel(info->var.xres, fbi->regbase + WMT_GOVR_XRES);
- writel(info->var.xres_virtual, fbi->regbase + WMT_GOVR_XRES_VIRTUAL);
+ writel(info->var.xres, fbi->regbase + REG_GOVRH_PIXWID);
+ writel(info->var.xres_virtual, fbi->regbase + REG_GOVRH_BUFWID);
/* black magic ;) */
- writel(0xf, fbi->regbase + WMT_GOVR_FHI);
- writel(4, fbi->regbase + WMT_GOVR_DVO_SET);
- writel(1, fbi->regbase + WMT_GOVR_MIF_ENABLE);
- writel(1, fbi->regbase + WMT_GOVR_REG_UPDATE);
+ writel(0xf, fbi->regbase + REG_GOVRH_FHI);
+ writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
+ writel(1, fbi->regbase + REG_GOVRH_MIF);
+ writel(1, fbi->regbase + REG_GOVRH_REG_STS);
return 0;
}
@@ -120,19 +185,19 @@ static int wm8505fb_set_timing(struct fb_info *info)
int v_all = v_end + info->var.lower_margin;
int v_sync = info->var.vsync_len;
- writel(0, fbi->regbase + WMT_GOVR_TG);
+ writel(0, fbi->regbase + REG_GOVRH_TG_ENABLE);
- writel(h_start, fbi->regbase + WMT_GOVR_TIMING_H_START);
- writel(h_end, fbi->regbase + WMT_GOVR_TIMING_H_END);
- writel(h_all, fbi->regbase + WMT_GOVR_TIMING_H_ALL);
- writel(h_sync, fbi->regbase + WMT_GOVR_TIMING_H_SYNC);
+ writel(h_start, fbi->regbase + REG_GOVRH_ACTPX_BG);
+ writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
+ writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
+ writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
- writel(v_start, fbi->regbase + WMT_GOVR_TIMING_V_START);
- writel(v_end, fbi->regbase + WMT_GOVR_TIMING_V_END);
- writel(v_all, fbi->regbase + WMT_GOVR_TIMING_V_ALL);
- writel(v_sync, fbi->regbase + WMT_GOVR_TIMING_V_SYNC);
+ writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
+ writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
+ writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
+ writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
- writel(1, fbi->regbase + WMT_GOVR_TG);
+ writel(1, fbi->regbase + REG_GOVRH_TG_ENABLE);
return 0;
}
@@ -174,7 +239,7 @@ static int wm8505fb_set_par(struct fb_info *info)
wm8505fb_set_timing(info);
writel(fbi->contrast<<16 | fbi->contrast<<8 | fbi->contrast,
- fbi->regbase + WMT_GOVR_CONTRAST);
+ fbi->regbase + REG_GOVRH_CONTRAST);
return 0;
}
@@ -250,8 +315,8 @@ static int wm8505fb_pan_display(struct fb_var_screeninfo *var,
{
struct wm8505fb_info *fbi = to_wm8505fb_info(info);
- writel(var->xoffset, fbi->regbase + WMT_GOVR_XPAN);
- writel(var->yoffset, fbi->regbase + WMT_GOVR_YPAN);
+ writel(var->xoffset, fbi->regbase + REG_GOVRH_VCROP);
+ writel(var->yoffset, fbi->regbase + REG_GOVRH_HCROP);
return 0;
}
@@ -264,7 +329,7 @@ static int wm8505fb_blank(int blank, struct fb_info *info)
wm8505fb_set_timing(info);
break;
default:
- writel(0, fbi->regbase + WMT_GOVR_TIMING_V_SYNC);
+ writel(0, fbi->regbase + REG_GOVRH_HDMI_VBISW);
break;
}
diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/wmt_ge_rops.c
index 4aaeb18..68de46a 100644
--- a/drivers/video/wmt_ge_rops.c
+++ b/drivers/video/wmt_ge_rops.c
@@ -20,29 +20,189 @@
#include <linux/platform_device.h>
#include "fb_draw.h"
-#define GE_COMMAND_OFF 0x00
-#define GE_DEPTH_OFF 0x04
-#define GE_HIGHCOLOR_OFF 0x08
-#define GE_ROPCODE_OFF 0x14
-#define GE_FIRE_OFF 0x18
-#define GE_SRCBASE_OFF 0x20
-#define GE_SRCDISPW_OFF 0x24
-#define GE_SRCDISPH_OFF 0x28
-#define GE_SRCAREAX_OFF 0x2c
-#define GE_SRCAREAY_OFF 0x30
-#define GE_SRCAREAW_OFF 0x34
-#define GE_SRCAREAH_OFF 0x38
-#define GE_DESTBASE_OFF 0x3c
-#define GE_DESTDISPW_OFF 0x40
-#define GE_DESTDISPH_OFF 0x44
-#define GE_DESTAREAX_OFF 0x48
-#define GE_DESTAREAY_OFF 0x4c
-#define GE_DESTAREAW_OFF 0x50
-#define GE_DESTAREAH_OFF 0x54
-#define GE_PAT0C_OFF 0x88 /* Pattern 0 color */
-#define GE_ENABLE_OFF 0xec
-#define GE_INTEN_OFF 0xf0
-#define GE_STATUS_OFF 0xf8
+#define GE_COMMAND 0x0000
+#define GE_COLOR_DEPTH 0x0004
+#define GE_HM_SEL 0x0008
+#define GE_PAT_TRAN_EN 0x000C
+#define GE_FONT_TRAN_EN 0x0010
+#define GE_ROP_CODE 0x0014
+#define GE_FIRE 0x0018
+#define GE_ROP_BG_CODE 0x001C
+#define GE_SRC_BADDR 0x0020
+#define GE_SRC_DISP_W 0x0024
+#define GE_SRC_DISP_H 0x0028
+#define GE_SRC_X_START 0x002C
+#define GE_SRC_Y_START 0x0030
+#define GE_SRC_WIDTH 0x0034
+#define GE_SRC_HEIGHT 0x0038
+#define GE_DES_BADDR 0x003C
+#define GE_DES_DISP_W 0x0040
+#define GE_DES_DISP_H 0x0044
+#define GE_DES_X_START 0x0048
+#define GE_DES_Y_START 0x004C
+#define GE_DES_WIDTH 0x0050
+#define GE_DES_HEIGHT 0x0054
+#define GE_FONT0_BUF 0x0058
+#define GE_FONT1_BUF 0x005C
+#define GE_FONT2_BUF 0x0060
+#define GE_FONT3_BUF 0x0064
+#define GE_PAT0_BUF 0x0068
+#define GE_PAT1_BUF 0x006C
+#define GE_PAT2_BUF 0x0070
+#define GE_PAT3_BUF 0x0074
+#define GE_PAT4_BUF 0x0078
+#define GE_PAT5_BUF 0x007C
+#define GE_PAT6_BUF 0x0080
+#define GE_PAT7_BUF 0x0084
+#define GE_PAT0_COLOR 0x0088
+#define GE_PAT1_COLOR 0x008C
+#define GE_PAT2_COLOR 0x0090
+#define GE_PAT3_COLOR 0x0094
+#define GE_PAT4_COLOR 0x0098
+#define GE_PAT5_COLOR 0x009C
+#define GE_PAT6_COLOR 0x00A0
+#define GE_PAT7_COLOR 0x00A4
+#define GE_PAT8_COLOR 0x00A8
+#define GE_PAT9_COLOR 0x00AC
+#define GE_PAT10_COLOR 0x00B0
+#define GE_PAT11_COLOR 0x00B4
+#define GE_PAT12_COLOR 0x00B8
+#define GE_PAT13_COLOR 0x00BC
+#define GE_PAT14_COLOR 0x00C0
+#define GE_PAT15_COLOR 0x00C4
+#define GE_CK_SEL 0x00C8
+#define GE_SRC_CK 0x00CC
+#define GE_DES_CK 0x00D0
+#define GE_ALPHA_SEL 0x00D4
+#define GE_BITBLT_ALPHA 0x00D8
+#define GE_DES_PATH_EN 0x00DC
+#define GE_ROTATE_MODE 0x00E0
+#define GE_MIRROR_MODE 0x00E4
+#define GE_GE_DELAY 0x00E8
+#define GE_ENABLE 0x00EC
+#define GE_INT_EN 0x00F0
+#define GE_INT_FLAG 0x00F4
+#define GE_STATUS 0x00F8
+#define GE_SWID 0x00FC
+#define GE_LN_X_START 0x0100
+#define GE_LN_X_END 0x0104
+#define GE_LN_Y_START 0x0108
+#define GE_LN_Y_END 0x0110
+#define GE_LN_TCK 0x0114
+#define GE_AMX_CSC_BYPASS 0x0118
+#define GE_C1_COEF 0x011C
+#define GE_LN_STL_TB 0x0120
+#define GE_LN_STL_RTN 0x0124
+#define GE_LN_STL_DATA 0x0128
+#define GE_LN_STL_APA 0x012C
+#define GE_BC_P1X 0x0130
+#define GE_BC_P1Y 0x0134
+#define GE_BC_P2X 0x0138
+#define GE_BC_P2Y 0x013C
+#define GE_BC_P3X 0x0140
+#define GE_BC_P3Y 0x0144
+#define GE_BC_COLOR 0x0148
+#define GE_BC_ALPHA 0x014C
+#define GE_BC_DELTA_T 0x0150
+#define GE_BC_L_STL 0x0154
+#define GE_BC_L_STL_RTN 0x0158
+#define GE_C2_COEF 0x015C
+#define GE_C3_COEF 0x0160
+#define GE_C4_COEF 0x0164
+#define GE_C5_COEF 0x0168
+#define GE_C6_COEF 0x016C
+#define GE_C7_COEF 0x0170
+#define GE_C8_COEF 0x0174
+#define GE_YUV2_Y_BADDR 0x0178
+#define GE_YUV2_C_BADDR 0x017C
+#define GE_VQ_EN 0x0180
+#define GE_VQ_SIZE 0x0184
+#define GE_VQ_UDPTR 0x0188
+#define GE_VQ_BASEADDR 0x018C
+#define GE_VQ_WRSIZE 0x0190
+#define GE_VQ_STADDRW 0x0194
+#define GE_VQ_THR 0x0198
+#define GE_VQ_YUV2_Y_FBW 0x019C
+#define GE_ROP4_EN 0x01A0
+#define GE_ALPHA_PLANE_EN 0x01A4
+#define GE_MASK_BADDR 0x01A8
+#define GE_MASK_DISP_W 0x01AC
+#define GE_MASK_DISP_H 0x01B0
+#define GE_MASK_X_START 0x01B4
+#define GE_MASK_Y_START 0x01B8
+#define GE_MASK_WIDTH 0x01BC
+#define GE_MASK_HEIGHT 0x01C0
+#define GE_DW_MASK_BADDR 0x01C4
+#define GE_ALPHA_PLANE_WBE 0x01C8
+#define GE_YUV2_C_FBW 0x01CC
+#define GE_ADAP_BLEND_EN 0x01D0
+#define GE_SRC_ALPHA_SEL 0x01D4
+#define GE_SRC_BLEND_APA 0x01D8
+#define GE_DES_ALPHA_SEL 0x01DC
+#define GE_DES_BLEND_APA 0x01E0
+#define GE_ADAP_CLAMP_EN 0x01E4
+#define GE_YUV2_C_BLEND_SEL 0x01E8
+#define GE_SRC_INDEP_MODE 0x01EC
+#define GE_C9_COEF 0x01F0
+#define GE_COEF_I 0x01F4
+#define GE_COEF_J 0x01F8
+#define GE_COEF_K 0x01FC
+#define GE_G1_CD 0x0200
+#define GE_G2_CD 0x0204
+#define GE_G1_FG_ADDR 0x0210
+#define GE_G1_BG_ADDR 0x0214
+#define GE_G1_FB_SEL 0x0218
+#define GE_G2_FG_ADDR 0x021C
+#define GE_G2_BG_ADDR 0x0220
+#define GE_G2_FB_SEL 0x0224
+#define GE_G1_X_START 0x0230
+#define GE_G1_X_END 0x0234
+#define GE_G1_Y_START 0x0238
+#define GE_G1_Y_END 0x023C
+#define GE_G2_X_START 0x0240
+#define GE_G2_X_END 0x0244
+#define GE_G2_Y_START 0x0248
+#define GE_G2_Y_END 0x024C
+#define GE_DISP_X_END 0x0250
+#define GE_DISP_Y_END 0x0254
+#define GE_AMX_CB 0x0258
+#define GE_G1_YUV_MODE_EN 0x025C
+#define GE_G2_YUV_MODE_EN 0x0260
+#define GE_G1_YUV_FMT_SEL 0x0264
+#define GE_G1_YUV_OUTP_SEL 0x0268
+#define GE_G2_YUV_FMT_SEL 0x026C
+#define GE_G2_YUV_OUTP_SEL 0x0270
+#define GE_AMX_CSC_CFG 0x0274
+#define GE_AMX_CSC_MODE 0x0278
+#define GE_AMX_Y_SUB_16_EN 0x027C
+#define GE_G1_YUV_ADDR 0x0280
+#define GE_G2_YUV_ADDR 0x0284
+#define GE_G1_CK_EN 0x0298
+#define GE_G2_CK_EN 0x029C
+#define GE_G1_C_KEY 0x02A0
+#define GE_G2_C_KEY 0x02A4
+#define GE_G1_AMX_EN 0x02A8
+#define GE_G2_AMX_EN 0x02AC
+#define GE_CK2_APA 0x02B0
+#define GE_AMX_CTL 0x02B4
+#define GE_CK_APA 0x02B8
+#define GE_FIX_APA 0x02BC
+#define GE_G1_AMX_HM 0x02C0
+#define GE_G2_AMX_HM 0x02C4
+#define GE_NH_DATA 0x02C8
+#define GE_VSYNC_STS 0x02CC
+#define GE_REG_UPD 0x02D0
+#define GE_REG_SEL 0x02D4
+#define GE_REG_AMX2_CTL 0x02D8
+#define GE_FIX2_APA 0x02DC
+#define GE_G1_H_SCALE 0x02E0
+#define GE_G2_H_SCALE 0x02E4
+#define GE_G1_FBW 0x02E8
+#define GE_G1_VCROP 0x02EC
+#define GE_G1_HCROP 0x02F0
+#define GE_G2_FBW 0x02F4
+#define GE_G2_VCROP 0x02F8
+#define GE_G2_HCROP 0x02FC
static void __iomem *regbase;
@@ -65,20 +225,20 @@ void wmt_ge_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
p->fbops->fb_sync(p);
writel(p->var.bits_per_pixel == 32 ? 3 :
- (p->var.bits_per_pixel == 8 ? 0 : 1), regbase + GE_DEPTH_OFF);
- writel(p->var.bits_per_pixel == 15 ? 1 : 0, regbase + GE_HIGHCOLOR_OFF);
- writel(p->fix.smem_start, regbase + GE_DESTBASE_OFF);
- writel(p->var.xres_virtual - 1, regbase + GE_DESTDISPW_OFF);
- writel(p->var.yres_virtual - 1, regbase + GE_DESTDISPH_OFF);
- writel(rect->dx, regbase + GE_DESTAREAX_OFF);
- writel(rect->dy, regbase + GE_DESTAREAY_OFF);
- writel(rect->width - 1, regbase + GE_DESTAREAW_OFF);
- writel(rect->height - 1, regbase + GE_DESTAREAH_OFF);
-
- writel(pat, regbase + GE_PAT0C_OFF);
- writel(1, regbase + GE_COMMAND_OFF);
- writel(rect->rop == ROP_XOR ? 0x5a : 0xf0, regbase + GE_ROPCODE_OFF);
- writel(1, regbase + GE_FIRE_OFF);
+ (p->var.bits_per_pixel == 8 ? 0 : 1), regbase + GE_COLOR_DEPTH);
+ writel(p->var.bits_per_pixel == 15 ? 1 : 0, regbase + GE_HM_SEL);
+ writel(p->fix.smem_start, regbase + GE_DES_BADDR);
+ writel(p->var.xres_virtual - 1, regbase + GE_DES_DISP_W);
+ writel(p->var.yres_virtual - 1, regbase + GE_DES_DISP_H);
+ writel(rect->dx, regbase + GE_DES_X_START);
+ writel(rect->dy, regbase + GE_DES_Y_START);
+ writel(rect->width - 1, regbase + GE_DES_WIDTH);
+ writel(rect->height - 1, regbase + GE_DES_HEIGHT);
+
+ writel(pat, regbase + GE_PAT0_COLOR);
+ writel(1, regbase + GE_COMMAND);
+ writel(rect->rop == ROP_XOR ? 0x5a : 0xf0, regbase + GE_ROP_CODE);
+ writel(1, regbase + GE_FIRE);
}
EXPORT_SYMBOL_GPL(wmt_ge_fillrect);
@@ -91,34 +251,34 @@ void wmt_ge_copyarea(struct fb_info *p, const struct fb_copyarea *area)
p->fbops->fb_sync(p);
writel(p->var.bits_per_pixel > 16 ? 3 :
- (p->var.bits_per_pixel > 8 ? 1 : 0), regbase + GE_DEPTH_OFF);
-
- writel(p->fix.smem_start, regbase + GE_SRCBASE_OFF);
- writel(p->var.xres_virtual - 1, regbase + GE_SRCDISPW_OFF);
- writel(p->var.yres_virtual - 1, regbase + GE_SRCDISPH_OFF);
- writel(area->sx, regbase + GE_SRCAREAX_OFF);
- writel(area->sy, regbase + GE_SRCAREAY_OFF);
- writel(area->width - 1, regbase + GE_SRCAREAW_OFF);
- writel(area->height - 1, regbase + GE_SRCAREAH_OFF);
-
- writel(p->fix.smem_start, regbase + GE_DESTBASE_OFF);
- writel(p->var.xres_virtual - 1, regbase + GE_DESTDISPW_OFF);
- writel(p->var.yres_virtual - 1, regbase + GE_DESTDISPH_OFF);
- writel(area->dx, regbase + GE_DESTAREAX_OFF);
- writel(area->dy, regbase + GE_DESTAREAY_OFF);
- writel(area->width - 1, regbase + GE_DESTAREAW_OFF);
- writel(area->height - 1, regbase + GE_DESTAREAH_OFF);
-
- writel(0xcc, regbase + GE_ROPCODE_OFF);
- writel(1, regbase + GE_COMMAND_OFF);
- writel(1, regbase + GE_FIRE_OFF);
+ (p->var.bits_per_pixel > 8 ? 1 : 0), regbase + GE_COLOR_DEPTH);
+
+ writel(p->fix.smem_start, regbase + GE_SRC_BADDR);
+ writel(p->var.xres_virtual - 1, regbase + GE_SRC_DISP_W);
+ writel(p->var.yres_virtual - 1, regbase + GE_SRC_DISP_H);
+ writel(area->sx, regbase + GE_SRC_X_START);
+ writel(area->sy, regbase + GE_SRC_Y_START);
+ writel(area->width - 1, regbase + GE_SRC_WIDTH);
+ writel(area->height - 1, regbase + GE_SRC_HEIGHT);
+
+ writel(p->fix.smem_start, regbase + GE_DES_BADDR);
+ writel(p->var.xres_virtual - 1, regbase + GE_DES_DISP_W);
+ writel(p->var.yres_virtual - 1, regbase + GE_DES_DISP_H);
+ writel(area->dx, regbase + GE_DES_X_START);
+ writel(area->dy, regbase + GE_DES_Y_START);
+ writel(area->width - 1, regbase + GE_DES_WIDTH);
+ writel(area->height - 1, regbase + GE_DES_HEIGHT);
+
+ writel(0xcc, regbase + GE_ROP_CODE);
+ writel(1, regbase + GE_COMMAND);
+ writel(1, regbase + GE_FIRE);
}
EXPORT_SYMBOL_GPL(wmt_ge_copyarea);
int wmt_ge_sync(struct fb_info *p)
{
int loops = 5000000;
- while ((readl(regbase + GE_STATUS_OFF) & 4) && --loops)
+ while ((readl(regbase + GE_STATUS) & 4) && --loops)
cpu_relax();
return loops > 0 ? 0 : -EBUSY;
}
@@ -146,7 +306,7 @@ static int wmt_ge_rops_probe(struct platform_device *pdev)
return -EBUSY;
}
- writel(1, regbase + GE_ENABLE_OFF);
+ writel(1, regbase + GE_ENABLE);
printk(KERN_INFO "Enabled support for WMT GE raster acceleration\n");
return 0;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 2/4] fb: vt8500: Convert to use vendor register names
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: linux-arm-kernel
Change all the #defines to match the vendor defined names, and change the
references in wm8505fb.c and wmt_ge_rops.c.
Add all the missing register offsets as well to prevent churn in the future.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
drivers/video/wm8505fb.c | 159 ++++++++++++++++--------
drivers/video/wmt_ge_rops.c | 280 +++++++++++++++++++++++++++++++++----------
2 files changed, 332 insertions(+), 107 deletions(-)
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index f824af8..167a9e2 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -38,29 +38,94 @@
#define DRIVER_NAME "wm8505-fb"
-#define WMT_GOVR_COLORSPACE1 0x030
-#define WMT_GOVR_MIF_ENABLE 0x080
-#define WMT_GOVR_FBADDR 0x090
-#define WMT_GOVR_FBADDR1 0x094
-#define WMT_GOVR_XRES 0x098
-#define WMT_GOVR_XRES_VIRTUAL 0x09c
-#define WMT_GOVR_YPAN 0x0a0
-#define WMT_GOVR_XPAN 0x0a4
-#define WMT_GOVR_FHI 0x0a8
-#define WMT_GOVR_REG_UPDATE 0x0e4
-#define WMT_GOVR_TG 0x100
-#define WMT_GOVR_TIMING_H_ALL 0x108
-#define WMT_GOVR_TIMING_V_ALL 0x10c
-#define WMT_GOVR_TIMING_V_START 0x110
-#define WMT_GOVR_TIMING_V_END 0x114
-#define WMT_GOVR_TIMING_H_START 0x118
-#define WMT_GOVR_TIMING_H_END 0x11c
-#define WMT_GOVR_TIMING_V_SYNC 0x128
-#define WMT_GOVR_TIMING_H_SYNC 0x12c
-#define WMT_GOVR_DVO_SET 0x148
-#define WMT_GOVR_CONTRAST 0x1b8
-#define WMT_GOVR_BRGHTNESS 0x1bc
-#define WMT_GOVR_COLORSPACE 0x1e4
+#define REG_GOVRH_CUR_ADDR 0x0000
+#define REG_GOVRH_CUR_WIDTH 0x0004
+#define REG_GOVRH_CUR_FB_WIDTH 0x0008
+#define REG_GOVRH_CUR_VCROP 0x000C
+#define REG_GOVRH_CUR_HCROP 0x0010
+#define REG_GOVRH_CUR_HCOORD 0x0014
+#define REG_GOVRH_CUR_VCOORD 0x0018
+#define REG_GOVRH_CUR_STATUS 0x001C
+#define REG_GOVRH_CUR_COLOR_KEY 0x0020
+#define REG_GOVRH_DVO_PIX 0x0030
+#define REG_GOVRH_DVO_DLY_SEL 0x0034
+#define REG_GOVRH_INT 0x0038
+#define REG_GOVRH_DVO_BLANK_DATA 0x003C
+#define REG_GOVRH_DIRPATH 0x0040 /* WM8750+ */
+#define REG_GOVRH_MIF 0x0080
+#define REG_GOVRH_COLFMT 0x0084
+#define REG_GOVRH_SRCFMT 0x0088
+#define REG_GOVRH_DSTFMT 0x008C
+#define REG_GOVRH_YSA 0x0090
+#define REG_GOVRH_CSA 0x0094
+#define REG_GOVRH_PIXWID 0x0098
+#define REG_GOVRH_BUFWID 0x009C
+#define REG_GOVRH_VCROP 0x00A0
+#define REG_GOVRH_HCROP 0x00A4
+#define REG_GOVRH_FHI 0x00A8
+#define REG_GOVRH_COLFMT2 0x00AC
+#define REG_GOVRH_YSA2 0x00B0 /* WM8950 */
+#define REG_GOVRH_CSA2 0x00B4 /* WM8950 */
+#define REG_GOVRH_MIF_FRAME_MODE 0x00B8 /* WM8950 */
+#define REG_GOVRH_REG_STS 0x00E4
+#define REG_GOVRH_SWFLD 0x00E8
+#define REG_GOVRH_TG_ENABLE 0x0100
+#define REG_GOVRH_READ_CYC 0x0104
+#define REG_GOVRH_H_ALLPXL 0x0108
+#define REG_GOVRH_V_ALLLN 0x010C
+#define REG_GOVRH_ACTLN_BG 0x0110
+#define REG_GOVRH_ACTLN_END 0x0114
+#define REG_GOVRH_ACTPX_BG 0x0118
+#define REG_GOVRH_ACTPX_END 0x011C
+#define REG_GOVRH_VBIE_LINE 0x0120
+#define REG_GOVRH_PVBI_LINE 0x0124
+#define REG_GOVRH_HDMI_VBISW 0x0128
+#define REG_GOVRH_HDMI_HSYNW 0x012C
+#define REG_GOVRH_VSYNC_OFFSET 0x0130
+#define REG_GOVRH_FIELD_STATUS 0x0134
+#define REG_GOVRH_HDMI_3D 0x013C /* WM8950 */
+#define REG_GOVRH_DVO_SET 0x0148
+#define REG_GOVRH_CB_ENABLE 0x0150
+#define REG_GOVRH_H_ALLPXL2 0x0158
+#define REG_GOVRH_V_ALLLN2 0x015C
+#define REG_GOVRH_ACTLN_BG2 0x0160
+#define REG_GOVRH_ACTLN_END2 0x0164
+#define REG_GOVRH_ACTPX_BG2 0x0168
+#define REG_GOVRH_ACTPX_END2 0x016C
+#define REG_GOVRH_VBIE_LINE2 0x0170
+#define REG_GOVRH_PVBI_LINE2 0x0174
+#define REG_GOVRH_HDMI_VBISW2 0x0178
+#define REG_GOVRH_HDMI_HSYNW2 0x017C
+#define REG_GOVRH_LVDS_CTRL 0x0180 /* WM8750+ */
+#define REG_GOVRH_LVDS_CTRL2 0x0184 /* WM8750+ */
+#define REG_GOVRH_DAC_LP_SENSE_VAL 0x0188 /* WM8750 */
+#define REG_GOVRH_DAC_TEST_MODE 0x018C /* WM8750 */
+#define REG_GOVRH_VGA_HSYNW 0x0190 /* WM8750 */
+#define REG_GOVRH_VGA_VSYNW 0x0194 /* WM8750 */
+#define REG_GOVRH_VGA_SYNPOLAR 0x0198 /* WM8750 */
+#define REG_GOVRH_DAC_MOD 0x019C /* WM8750 */
+#define REG_GOVRH_DAC_VAL 0x01A0 /* WM8750 */
+#define REG_GOVRH_DAC_CON 0x01A4 /* WM8750 */
+#define REG_GOVRH_DAC_TEST 0x01A8 /* WM8750 */
+#define REG_GOVRH_DAC_BTEST 0x01AC /* WM8750 */
+#define REG_GOVRH_DAC_CTEST 0x01B0 /* WM8750 */
+#define REG_GOVRH_DAC_DBG 0x01B4 /* WM8750 */
+#define REG_GOVRH_CONTRAST 0x01B8
+#define REG_GOVRH_BRIGHTNESS 0x01BC
+#define REG_GOVRH_DMACSC_COEF0 0x01C0
+#define REG_GOVRH_DMACSC_COEF1 0x01C4
+#define REG_GOVRH_DMACSC_COEF2 0x01C8
+#define REG_GOVRH_DMACSC_COEF3 0x01CC
+#define REG_GOVRH_DMACSC_COEF4 0x01D0
+#define REG_GOVRH_DMACSC_COEF5 0x01D8
+#define REG_GOVRH_DMACSC_COEF6 0x01DC
+#define REG_GOVRH_CSC_MODE 0x01E0
+#define REG_GOVRH_YUVRGB 0x01E4
+#define REG_GOVRH_H264_INPUT_EN 0x01E8
+#define REG_GOVRH_DISP_EN 0x01EC /* WM8750 */
+#define REG_GOVRH_HSCALE_UP 0x01F4
+#define REG_GOVRH_IGS_MODE 0x01F8
+#define REG_GOVRH_IGS_MODE2 0x01FC
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
@@ -82,26 +147,26 @@ static int wm8505fb_init_hw(struct fb_info *info)
writel(0, fbi->regbase + i);
/* Set frame buffer address */
- writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR);
- writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR1);
+ writel(fbi->fb.fix.smem_start, fbi->regbase + REG_GOVRH_YSA);
+ writel(fbi->fb.fix.smem_start, fbi->regbase + REG_GOVRH_CSA);
/*
* Set in-memory picture format to RGB
* 0x31C sets the correct color mode (RGB565) for WM8650
* Bit 8+9 (0x300) are ignored on WM8505 as reserved
*/
- writel(0x31c, fbi->regbase + WMT_GOVR_COLORSPACE);
- writel(1, fbi->regbase + WMT_GOVR_COLORSPACE1);
+ writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
+ writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
/* Virtual buffer size */
- writel(info->var.xres, fbi->regbase + WMT_GOVR_XRES);
- writel(info->var.xres_virtual, fbi->regbase + WMT_GOVR_XRES_VIRTUAL);
+ writel(info->var.xres, fbi->regbase + REG_GOVRH_PIXWID);
+ writel(info->var.xres_virtual, fbi->regbase + REG_GOVRH_BUFWID);
/* black magic ;) */
- writel(0xf, fbi->regbase + WMT_GOVR_FHI);
- writel(4, fbi->regbase + WMT_GOVR_DVO_SET);
- writel(1, fbi->regbase + WMT_GOVR_MIF_ENABLE);
- writel(1, fbi->regbase + WMT_GOVR_REG_UPDATE);
+ writel(0xf, fbi->regbase + REG_GOVRH_FHI);
+ writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
+ writel(1, fbi->regbase + REG_GOVRH_MIF);
+ writel(1, fbi->regbase + REG_GOVRH_REG_STS);
return 0;
}
@@ -120,19 +185,19 @@ static int wm8505fb_set_timing(struct fb_info *info)
int v_all = v_end + info->var.lower_margin;
int v_sync = info->var.vsync_len;
- writel(0, fbi->regbase + WMT_GOVR_TG);
+ writel(0, fbi->regbase + REG_GOVRH_TG_ENABLE);
- writel(h_start, fbi->regbase + WMT_GOVR_TIMING_H_START);
- writel(h_end, fbi->regbase + WMT_GOVR_TIMING_H_END);
- writel(h_all, fbi->regbase + WMT_GOVR_TIMING_H_ALL);
- writel(h_sync, fbi->regbase + WMT_GOVR_TIMING_H_SYNC);
+ writel(h_start, fbi->regbase + REG_GOVRH_ACTPX_BG);
+ writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
+ writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
+ writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
- writel(v_start, fbi->regbase + WMT_GOVR_TIMING_V_START);
- writel(v_end, fbi->regbase + WMT_GOVR_TIMING_V_END);
- writel(v_all, fbi->regbase + WMT_GOVR_TIMING_V_ALL);
- writel(v_sync, fbi->regbase + WMT_GOVR_TIMING_V_SYNC);
+ writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
+ writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
+ writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
+ writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
- writel(1, fbi->regbase + WMT_GOVR_TG);
+ writel(1, fbi->regbase + REG_GOVRH_TG_ENABLE);
return 0;
}
@@ -174,7 +239,7 @@ static int wm8505fb_set_par(struct fb_info *info)
wm8505fb_set_timing(info);
writel(fbi->contrast<<16 | fbi->contrast<<8 | fbi->contrast,
- fbi->regbase + WMT_GOVR_CONTRAST);
+ fbi->regbase + REG_GOVRH_CONTRAST);
return 0;
}
@@ -250,8 +315,8 @@ static int wm8505fb_pan_display(struct fb_var_screeninfo *var,
{
struct wm8505fb_info *fbi = to_wm8505fb_info(info);
- writel(var->xoffset, fbi->regbase + WMT_GOVR_XPAN);
- writel(var->yoffset, fbi->regbase + WMT_GOVR_YPAN);
+ writel(var->xoffset, fbi->regbase + REG_GOVRH_VCROP);
+ writel(var->yoffset, fbi->regbase + REG_GOVRH_HCROP);
return 0;
}
@@ -264,7 +329,7 @@ static int wm8505fb_blank(int blank, struct fb_info *info)
wm8505fb_set_timing(info);
break;
default:
- writel(0, fbi->regbase + WMT_GOVR_TIMING_V_SYNC);
+ writel(0, fbi->regbase + REG_GOVRH_HDMI_VBISW);
break;
}
diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/wmt_ge_rops.c
index 4aaeb18..68de46a 100644
--- a/drivers/video/wmt_ge_rops.c
+++ b/drivers/video/wmt_ge_rops.c
@@ -20,29 +20,189 @@
#include <linux/platform_device.h>
#include "fb_draw.h"
-#define GE_COMMAND_OFF 0x00
-#define GE_DEPTH_OFF 0x04
-#define GE_HIGHCOLOR_OFF 0x08
-#define GE_ROPCODE_OFF 0x14
-#define GE_FIRE_OFF 0x18
-#define GE_SRCBASE_OFF 0x20
-#define GE_SRCDISPW_OFF 0x24
-#define GE_SRCDISPH_OFF 0x28
-#define GE_SRCAREAX_OFF 0x2c
-#define GE_SRCAREAY_OFF 0x30
-#define GE_SRCAREAW_OFF 0x34
-#define GE_SRCAREAH_OFF 0x38
-#define GE_DESTBASE_OFF 0x3c
-#define GE_DESTDISPW_OFF 0x40
-#define GE_DESTDISPH_OFF 0x44
-#define GE_DESTAREAX_OFF 0x48
-#define GE_DESTAREAY_OFF 0x4c
-#define GE_DESTAREAW_OFF 0x50
-#define GE_DESTAREAH_OFF 0x54
-#define GE_PAT0C_OFF 0x88 /* Pattern 0 color */
-#define GE_ENABLE_OFF 0xec
-#define GE_INTEN_OFF 0xf0
-#define GE_STATUS_OFF 0xf8
+#define GE_COMMAND 0x0000
+#define GE_COLOR_DEPTH 0x0004
+#define GE_HM_SEL 0x0008
+#define GE_PAT_TRAN_EN 0x000C
+#define GE_FONT_TRAN_EN 0x0010
+#define GE_ROP_CODE 0x0014
+#define GE_FIRE 0x0018
+#define GE_ROP_BG_CODE 0x001C
+#define GE_SRC_BADDR 0x0020
+#define GE_SRC_DISP_W 0x0024
+#define GE_SRC_DISP_H 0x0028
+#define GE_SRC_X_START 0x002C
+#define GE_SRC_Y_START 0x0030
+#define GE_SRC_WIDTH 0x0034
+#define GE_SRC_HEIGHT 0x0038
+#define GE_DES_BADDR 0x003C
+#define GE_DES_DISP_W 0x0040
+#define GE_DES_DISP_H 0x0044
+#define GE_DES_X_START 0x0048
+#define GE_DES_Y_START 0x004C
+#define GE_DES_WIDTH 0x0050
+#define GE_DES_HEIGHT 0x0054
+#define GE_FONT0_BUF 0x0058
+#define GE_FONT1_BUF 0x005C
+#define GE_FONT2_BUF 0x0060
+#define GE_FONT3_BUF 0x0064
+#define GE_PAT0_BUF 0x0068
+#define GE_PAT1_BUF 0x006C
+#define GE_PAT2_BUF 0x0070
+#define GE_PAT3_BUF 0x0074
+#define GE_PAT4_BUF 0x0078
+#define GE_PAT5_BUF 0x007C
+#define GE_PAT6_BUF 0x0080
+#define GE_PAT7_BUF 0x0084
+#define GE_PAT0_COLOR 0x0088
+#define GE_PAT1_COLOR 0x008C
+#define GE_PAT2_COLOR 0x0090
+#define GE_PAT3_COLOR 0x0094
+#define GE_PAT4_COLOR 0x0098
+#define GE_PAT5_COLOR 0x009C
+#define GE_PAT6_COLOR 0x00A0
+#define GE_PAT7_COLOR 0x00A4
+#define GE_PAT8_COLOR 0x00A8
+#define GE_PAT9_COLOR 0x00AC
+#define GE_PAT10_COLOR 0x00B0
+#define GE_PAT11_COLOR 0x00B4
+#define GE_PAT12_COLOR 0x00B8
+#define GE_PAT13_COLOR 0x00BC
+#define GE_PAT14_COLOR 0x00C0
+#define GE_PAT15_COLOR 0x00C4
+#define GE_CK_SEL 0x00C8
+#define GE_SRC_CK 0x00CC
+#define GE_DES_CK 0x00D0
+#define GE_ALPHA_SEL 0x00D4
+#define GE_BITBLT_ALPHA 0x00D8
+#define GE_DES_PATH_EN 0x00DC
+#define GE_ROTATE_MODE 0x00E0
+#define GE_MIRROR_MODE 0x00E4
+#define GE_GE_DELAY 0x00E8
+#define GE_ENABLE 0x00EC
+#define GE_INT_EN 0x00F0
+#define GE_INT_FLAG 0x00F4
+#define GE_STATUS 0x00F8
+#define GE_SWID 0x00FC
+#define GE_LN_X_START 0x0100
+#define GE_LN_X_END 0x0104
+#define GE_LN_Y_START 0x0108
+#define GE_LN_Y_END 0x0110
+#define GE_LN_TCK 0x0114
+#define GE_AMX_CSC_BYPASS 0x0118
+#define GE_C1_COEF 0x011C
+#define GE_LN_STL_TB 0x0120
+#define GE_LN_STL_RTN 0x0124
+#define GE_LN_STL_DATA 0x0128
+#define GE_LN_STL_APA 0x012C
+#define GE_BC_P1X 0x0130
+#define GE_BC_P1Y 0x0134
+#define GE_BC_P2X 0x0138
+#define GE_BC_P2Y 0x013C
+#define GE_BC_P3X 0x0140
+#define GE_BC_P3Y 0x0144
+#define GE_BC_COLOR 0x0148
+#define GE_BC_ALPHA 0x014C
+#define GE_BC_DELTA_T 0x0150
+#define GE_BC_L_STL 0x0154
+#define GE_BC_L_STL_RTN 0x0158
+#define GE_C2_COEF 0x015C
+#define GE_C3_COEF 0x0160
+#define GE_C4_COEF 0x0164
+#define GE_C5_COEF 0x0168
+#define GE_C6_COEF 0x016C
+#define GE_C7_COEF 0x0170
+#define GE_C8_COEF 0x0174
+#define GE_YUV2_Y_BADDR 0x0178
+#define GE_YUV2_C_BADDR 0x017C
+#define GE_VQ_EN 0x0180
+#define GE_VQ_SIZE 0x0184
+#define GE_VQ_UDPTR 0x0188
+#define GE_VQ_BASEADDR 0x018C
+#define GE_VQ_WRSIZE 0x0190
+#define GE_VQ_STADDRW 0x0194
+#define GE_VQ_THR 0x0198
+#define GE_VQ_YUV2_Y_FBW 0x019C
+#define GE_ROP4_EN 0x01A0
+#define GE_ALPHA_PLANE_EN 0x01A4
+#define GE_MASK_BADDR 0x01A8
+#define GE_MASK_DISP_W 0x01AC
+#define GE_MASK_DISP_H 0x01B0
+#define GE_MASK_X_START 0x01B4
+#define GE_MASK_Y_START 0x01B8
+#define GE_MASK_WIDTH 0x01BC
+#define GE_MASK_HEIGHT 0x01C0
+#define GE_DW_MASK_BADDR 0x01C4
+#define GE_ALPHA_PLANE_WBE 0x01C8
+#define GE_YUV2_C_FBW 0x01CC
+#define GE_ADAP_BLEND_EN 0x01D0
+#define GE_SRC_ALPHA_SEL 0x01D4
+#define GE_SRC_BLEND_APA 0x01D8
+#define GE_DES_ALPHA_SEL 0x01DC
+#define GE_DES_BLEND_APA 0x01E0
+#define GE_ADAP_CLAMP_EN 0x01E4
+#define GE_YUV2_C_BLEND_SEL 0x01E8
+#define GE_SRC_INDEP_MODE 0x01EC
+#define GE_C9_COEF 0x01F0
+#define GE_COEF_I 0x01F4
+#define GE_COEF_J 0x01F8
+#define GE_COEF_K 0x01FC
+#define GE_G1_CD 0x0200
+#define GE_G2_CD 0x0204
+#define GE_G1_FG_ADDR 0x0210
+#define GE_G1_BG_ADDR 0x0214
+#define GE_G1_FB_SEL 0x0218
+#define GE_G2_FG_ADDR 0x021C
+#define GE_G2_BG_ADDR 0x0220
+#define GE_G2_FB_SEL 0x0224
+#define GE_G1_X_START 0x0230
+#define GE_G1_X_END 0x0234
+#define GE_G1_Y_START 0x0238
+#define GE_G1_Y_END 0x023C
+#define GE_G2_X_START 0x0240
+#define GE_G2_X_END 0x0244
+#define GE_G2_Y_START 0x0248
+#define GE_G2_Y_END 0x024C
+#define GE_DISP_X_END 0x0250
+#define GE_DISP_Y_END 0x0254
+#define GE_AMX_CB 0x0258
+#define GE_G1_YUV_MODE_EN 0x025C
+#define GE_G2_YUV_MODE_EN 0x0260
+#define GE_G1_YUV_FMT_SEL 0x0264
+#define GE_G1_YUV_OUTP_SEL 0x0268
+#define GE_G2_YUV_FMT_SEL 0x026C
+#define GE_G2_YUV_OUTP_SEL 0x0270
+#define GE_AMX_CSC_CFG 0x0274
+#define GE_AMX_CSC_MODE 0x0278
+#define GE_AMX_Y_SUB_16_EN 0x027C
+#define GE_G1_YUV_ADDR 0x0280
+#define GE_G2_YUV_ADDR 0x0284
+#define GE_G1_CK_EN 0x0298
+#define GE_G2_CK_EN 0x029C
+#define GE_G1_C_KEY 0x02A0
+#define GE_G2_C_KEY 0x02A4
+#define GE_G1_AMX_EN 0x02A8
+#define GE_G2_AMX_EN 0x02AC
+#define GE_CK2_APA 0x02B0
+#define GE_AMX_CTL 0x02B4
+#define GE_CK_APA 0x02B8
+#define GE_FIX_APA 0x02BC
+#define GE_G1_AMX_HM 0x02C0
+#define GE_G2_AMX_HM 0x02C4
+#define GE_NH_DATA 0x02C8
+#define GE_VSYNC_STS 0x02CC
+#define GE_REG_UPD 0x02D0
+#define GE_REG_SEL 0x02D4
+#define GE_REG_AMX2_CTL 0x02D8
+#define GE_FIX2_APA 0x02DC
+#define GE_G1_H_SCALE 0x02E0
+#define GE_G2_H_SCALE 0x02E4
+#define GE_G1_FBW 0x02E8
+#define GE_G1_VCROP 0x02EC
+#define GE_G1_HCROP 0x02F0
+#define GE_G2_FBW 0x02F4
+#define GE_G2_VCROP 0x02F8
+#define GE_G2_HCROP 0x02FC
static void __iomem *regbase;
@@ -65,20 +225,20 @@ void wmt_ge_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
p->fbops->fb_sync(p);
writel(p->var.bits_per_pixel = 32 ? 3 :
- (p->var.bits_per_pixel = 8 ? 0 : 1), regbase + GE_DEPTH_OFF);
- writel(p->var.bits_per_pixel = 15 ? 1 : 0, regbase + GE_HIGHCOLOR_OFF);
- writel(p->fix.smem_start, regbase + GE_DESTBASE_OFF);
- writel(p->var.xres_virtual - 1, regbase + GE_DESTDISPW_OFF);
- writel(p->var.yres_virtual - 1, regbase + GE_DESTDISPH_OFF);
- writel(rect->dx, regbase + GE_DESTAREAX_OFF);
- writel(rect->dy, regbase + GE_DESTAREAY_OFF);
- writel(rect->width - 1, regbase + GE_DESTAREAW_OFF);
- writel(rect->height - 1, regbase + GE_DESTAREAH_OFF);
-
- writel(pat, regbase + GE_PAT0C_OFF);
- writel(1, regbase + GE_COMMAND_OFF);
- writel(rect->rop = ROP_XOR ? 0x5a : 0xf0, regbase + GE_ROPCODE_OFF);
- writel(1, regbase + GE_FIRE_OFF);
+ (p->var.bits_per_pixel = 8 ? 0 : 1), regbase + GE_COLOR_DEPTH);
+ writel(p->var.bits_per_pixel = 15 ? 1 : 0, regbase + GE_HM_SEL);
+ writel(p->fix.smem_start, regbase + GE_DES_BADDR);
+ writel(p->var.xres_virtual - 1, regbase + GE_DES_DISP_W);
+ writel(p->var.yres_virtual - 1, regbase + GE_DES_DISP_H);
+ writel(rect->dx, regbase + GE_DES_X_START);
+ writel(rect->dy, regbase + GE_DES_Y_START);
+ writel(rect->width - 1, regbase + GE_DES_WIDTH);
+ writel(rect->height - 1, regbase + GE_DES_HEIGHT);
+
+ writel(pat, regbase + GE_PAT0_COLOR);
+ writel(1, regbase + GE_COMMAND);
+ writel(rect->rop = ROP_XOR ? 0x5a : 0xf0, regbase + GE_ROP_CODE);
+ writel(1, regbase + GE_FIRE);
}
EXPORT_SYMBOL_GPL(wmt_ge_fillrect);
@@ -91,34 +251,34 @@ void wmt_ge_copyarea(struct fb_info *p, const struct fb_copyarea *area)
p->fbops->fb_sync(p);
writel(p->var.bits_per_pixel > 16 ? 3 :
- (p->var.bits_per_pixel > 8 ? 1 : 0), regbase + GE_DEPTH_OFF);
-
- writel(p->fix.smem_start, regbase + GE_SRCBASE_OFF);
- writel(p->var.xres_virtual - 1, regbase + GE_SRCDISPW_OFF);
- writel(p->var.yres_virtual - 1, regbase + GE_SRCDISPH_OFF);
- writel(area->sx, regbase + GE_SRCAREAX_OFF);
- writel(area->sy, regbase + GE_SRCAREAY_OFF);
- writel(area->width - 1, regbase + GE_SRCAREAW_OFF);
- writel(area->height - 1, regbase + GE_SRCAREAH_OFF);
-
- writel(p->fix.smem_start, regbase + GE_DESTBASE_OFF);
- writel(p->var.xres_virtual - 1, regbase + GE_DESTDISPW_OFF);
- writel(p->var.yres_virtual - 1, regbase + GE_DESTDISPH_OFF);
- writel(area->dx, regbase + GE_DESTAREAX_OFF);
- writel(area->dy, regbase + GE_DESTAREAY_OFF);
- writel(area->width - 1, regbase + GE_DESTAREAW_OFF);
- writel(area->height - 1, regbase + GE_DESTAREAH_OFF);
-
- writel(0xcc, regbase + GE_ROPCODE_OFF);
- writel(1, regbase + GE_COMMAND_OFF);
- writel(1, regbase + GE_FIRE_OFF);
+ (p->var.bits_per_pixel > 8 ? 1 : 0), regbase + GE_COLOR_DEPTH);
+
+ writel(p->fix.smem_start, regbase + GE_SRC_BADDR);
+ writel(p->var.xres_virtual - 1, regbase + GE_SRC_DISP_W);
+ writel(p->var.yres_virtual - 1, regbase + GE_SRC_DISP_H);
+ writel(area->sx, regbase + GE_SRC_X_START);
+ writel(area->sy, regbase + GE_SRC_Y_START);
+ writel(area->width - 1, regbase + GE_SRC_WIDTH);
+ writel(area->height - 1, regbase + GE_SRC_HEIGHT);
+
+ writel(p->fix.smem_start, regbase + GE_DES_BADDR);
+ writel(p->var.xres_virtual - 1, regbase + GE_DES_DISP_W);
+ writel(p->var.yres_virtual - 1, regbase + GE_DES_DISP_H);
+ writel(area->dx, regbase + GE_DES_X_START);
+ writel(area->dy, regbase + GE_DES_Y_START);
+ writel(area->width - 1, regbase + GE_DES_WIDTH);
+ writel(area->height - 1, regbase + GE_DES_HEIGHT);
+
+ writel(0xcc, regbase + GE_ROP_CODE);
+ writel(1, regbase + GE_COMMAND);
+ writel(1, regbase + GE_FIRE);
}
EXPORT_SYMBOL_GPL(wmt_ge_copyarea);
int wmt_ge_sync(struct fb_info *p)
{
int loops = 5000000;
- while ((readl(regbase + GE_STATUS_OFF) & 4) && --loops)
+ while ((readl(regbase + GE_STATUS) & 4) && --loops)
cpu_relax();
return loops > 0 ? 0 : -EBUSY;
}
@@ -146,7 +306,7 @@ static int wmt_ge_rops_probe(struct platform_device *pdev)
return -EBUSY;
}
- writel(1, regbase + GE_ENABLE_OFF);
+ writel(1, regbase + GE_ENABLE);
printk(KERN_INFO "Enabled support for WMT GE raster acceleration\n");
return 0;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 2/4] fb: vt8500: Convert to use vendor register names
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: linux-arm-kernel
Change all the #defines to match the vendor defined names, and change the
references in wm8505fb.c and wmt_ge_rops.c.
Add all the missing register offsets as well to prevent churn in the future.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
drivers/video/wm8505fb.c | 159 ++++++++++++++++--------
drivers/video/wmt_ge_rops.c | 280 +++++++++++++++++++++++++++++++++----------
2 files changed, 332 insertions(+), 107 deletions(-)
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index f824af8..167a9e2 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -38,29 +38,94 @@
#define DRIVER_NAME "wm8505-fb"
-#define WMT_GOVR_COLORSPACE1 0x030
-#define WMT_GOVR_MIF_ENABLE 0x080
-#define WMT_GOVR_FBADDR 0x090
-#define WMT_GOVR_FBADDR1 0x094
-#define WMT_GOVR_XRES 0x098
-#define WMT_GOVR_XRES_VIRTUAL 0x09c
-#define WMT_GOVR_YPAN 0x0a0
-#define WMT_GOVR_XPAN 0x0a4
-#define WMT_GOVR_FHI 0x0a8
-#define WMT_GOVR_REG_UPDATE 0x0e4
-#define WMT_GOVR_TG 0x100
-#define WMT_GOVR_TIMING_H_ALL 0x108
-#define WMT_GOVR_TIMING_V_ALL 0x10c
-#define WMT_GOVR_TIMING_V_START 0x110
-#define WMT_GOVR_TIMING_V_END 0x114
-#define WMT_GOVR_TIMING_H_START 0x118
-#define WMT_GOVR_TIMING_H_END 0x11c
-#define WMT_GOVR_TIMING_V_SYNC 0x128
-#define WMT_GOVR_TIMING_H_SYNC 0x12c
-#define WMT_GOVR_DVO_SET 0x148
-#define WMT_GOVR_CONTRAST 0x1b8
-#define WMT_GOVR_BRGHTNESS 0x1bc
-#define WMT_GOVR_COLORSPACE 0x1e4
+#define REG_GOVRH_CUR_ADDR 0x0000
+#define REG_GOVRH_CUR_WIDTH 0x0004
+#define REG_GOVRH_CUR_FB_WIDTH 0x0008
+#define REG_GOVRH_CUR_VCROP 0x000C
+#define REG_GOVRH_CUR_HCROP 0x0010
+#define REG_GOVRH_CUR_HCOORD 0x0014
+#define REG_GOVRH_CUR_VCOORD 0x0018
+#define REG_GOVRH_CUR_STATUS 0x001C
+#define REG_GOVRH_CUR_COLOR_KEY 0x0020
+#define REG_GOVRH_DVO_PIX 0x0030
+#define REG_GOVRH_DVO_DLY_SEL 0x0034
+#define REG_GOVRH_INT 0x0038
+#define REG_GOVRH_DVO_BLANK_DATA 0x003C
+#define REG_GOVRH_DIRPATH 0x0040 /* WM8750+ */
+#define REG_GOVRH_MIF 0x0080
+#define REG_GOVRH_COLFMT 0x0084
+#define REG_GOVRH_SRCFMT 0x0088
+#define REG_GOVRH_DSTFMT 0x008C
+#define REG_GOVRH_YSA 0x0090
+#define REG_GOVRH_CSA 0x0094
+#define REG_GOVRH_PIXWID 0x0098
+#define REG_GOVRH_BUFWID 0x009C
+#define REG_GOVRH_VCROP 0x00A0
+#define REG_GOVRH_HCROP 0x00A4
+#define REG_GOVRH_FHI 0x00A8
+#define REG_GOVRH_COLFMT2 0x00AC
+#define REG_GOVRH_YSA2 0x00B0 /* WM8950 */
+#define REG_GOVRH_CSA2 0x00B4 /* WM8950 */
+#define REG_GOVRH_MIF_FRAME_MODE 0x00B8 /* WM8950 */
+#define REG_GOVRH_REG_STS 0x00E4
+#define REG_GOVRH_SWFLD 0x00E8
+#define REG_GOVRH_TG_ENABLE 0x0100
+#define REG_GOVRH_READ_CYC 0x0104
+#define REG_GOVRH_H_ALLPXL 0x0108
+#define REG_GOVRH_V_ALLLN 0x010C
+#define REG_GOVRH_ACTLN_BG 0x0110
+#define REG_GOVRH_ACTLN_END 0x0114
+#define REG_GOVRH_ACTPX_BG 0x0118
+#define REG_GOVRH_ACTPX_END 0x011C
+#define REG_GOVRH_VBIE_LINE 0x0120
+#define REG_GOVRH_PVBI_LINE 0x0124
+#define REG_GOVRH_HDMI_VBISW 0x0128
+#define REG_GOVRH_HDMI_HSYNW 0x012C
+#define REG_GOVRH_VSYNC_OFFSET 0x0130
+#define REG_GOVRH_FIELD_STATUS 0x0134
+#define REG_GOVRH_HDMI_3D 0x013C /* WM8950 */
+#define REG_GOVRH_DVO_SET 0x0148
+#define REG_GOVRH_CB_ENABLE 0x0150
+#define REG_GOVRH_H_ALLPXL2 0x0158
+#define REG_GOVRH_V_ALLLN2 0x015C
+#define REG_GOVRH_ACTLN_BG2 0x0160
+#define REG_GOVRH_ACTLN_END2 0x0164
+#define REG_GOVRH_ACTPX_BG2 0x0168
+#define REG_GOVRH_ACTPX_END2 0x016C
+#define REG_GOVRH_VBIE_LINE2 0x0170
+#define REG_GOVRH_PVBI_LINE2 0x0174
+#define REG_GOVRH_HDMI_VBISW2 0x0178
+#define REG_GOVRH_HDMI_HSYNW2 0x017C
+#define REG_GOVRH_LVDS_CTRL 0x0180 /* WM8750+ */
+#define REG_GOVRH_LVDS_CTRL2 0x0184 /* WM8750+ */
+#define REG_GOVRH_DAC_LP_SENSE_VAL 0x0188 /* WM8750 */
+#define REG_GOVRH_DAC_TEST_MODE 0x018C /* WM8750 */
+#define REG_GOVRH_VGA_HSYNW 0x0190 /* WM8750 */
+#define REG_GOVRH_VGA_VSYNW 0x0194 /* WM8750 */
+#define REG_GOVRH_VGA_SYNPOLAR 0x0198 /* WM8750 */
+#define REG_GOVRH_DAC_MOD 0x019C /* WM8750 */
+#define REG_GOVRH_DAC_VAL 0x01A0 /* WM8750 */
+#define REG_GOVRH_DAC_CON 0x01A4 /* WM8750 */
+#define REG_GOVRH_DAC_TEST 0x01A8 /* WM8750 */
+#define REG_GOVRH_DAC_BTEST 0x01AC /* WM8750 */
+#define REG_GOVRH_DAC_CTEST 0x01B0 /* WM8750 */
+#define REG_GOVRH_DAC_DBG 0x01B4 /* WM8750 */
+#define REG_GOVRH_CONTRAST 0x01B8
+#define REG_GOVRH_BRIGHTNESS 0x01BC
+#define REG_GOVRH_DMACSC_COEF0 0x01C0
+#define REG_GOVRH_DMACSC_COEF1 0x01C4
+#define REG_GOVRH_DMACSC_COEF2 0x01C8
+#define REG_GOVRH_DMACSC_COEF3 0x01CC
+#define REG_GOVRH_DMACSC_COEF4 0x01D0
+#define REG_GOVRH_DMACSC_COEF5 0x01D8
+#define REG_GOVRH_DMACSC_COEF6 0x01DC
+#define REG_GOVRH_CSC_MODE 0x01E0
+#define REG_GOVRH_YUVRGB 0x01E4
+#define REG_GOVRH_H264_INPUT_EN 0x01E8
+#define REG_GOVRH_DISP_EN 0x01EC /* WM8750 */
+#define REG_GOVRH_HSCALE_UP 0x01F4
+#define REG_GOVRH_IGS_MODE 0x01F8
+#define REG_GOVRH_IGS_MODE2 0x01FC
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
@@ -82,26 +147,26 @@ static int wm8505fb_init_hw(struct fb_info *info)
writel(0, fbi->regbase + i);
/* Set frame buffer address */
- writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR);
- writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR1);
+ writel(fbi->fb.fix.smem_start, fbi->regbase + REG_GOVRH_YSA);
+ writel(fbi->fb.fix.smem_start, fbi->regbase + REG_GOVRH_CSA);
/*
* Set in-memory picture format to RGB
* 0x31C sets the correct color mode (RGB565) for WM8650
* Bit 8+9 (0x300) are ignored on WM8505 as reserved
*/
- writel(0x31c, fbi->regbase + WMT_GOVR_COLORSPACE);
- writel(1, fbi->regbase + WMT_GOVR_COLORSPACE1);
+ writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
+ writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
/* Virtual buffer size */
- writel(info->var.xres, fbi->regbase + WMT_GOVR_XRES);
- writel(info->var.xres_virtual, fbi->regbase + WMT_GOVR_XRES_VIRTUAL);
+ writel(info->var.xres, fbi->regbase + REG_GOVRH_PIXWID);
+ writel(info->var.xres_virtual, fbi->regbase + REG_GOVRH_BUFWID);
/* black magic ;) */
- writel(0xf, fbi->regbase + WMT_GOVR_FHI);
- writel(4, fbi->regbase + WMT_GOVR_DVO_SET);
- writel(1, fbi->regbase + WMT_GOVR_MIF_ENABLE);
- writel(1, fbi->regbase + WMT_GOVR_REG_UPDATE);
+ writel(0xf, fbi->regbase + REG_GOVRH_FHI);
+ writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
+ writel(1, fbi->regbase + REG_GOVRH_MIF);
+ writel(1, fbi->regbase + REG_GOVRH_REG_STS);
return 0;
}
@@ -120,19 +185,19 @@ static int wm8505fb_set_timing(struct fb_info *info)
int v_all = v_end + info->var.lower_margin;
int v_sync = info->var.vsync_len;
- writel(0, fbi->regbase + WMT_GOVR_TG);
+ writel(0, fbi->regbase + REG_GOVRH_TG_ENABLE);
- writel(h_start, fbi->regbase + WMT_GOVR_TIMING_H_START);
- writel(h_end, fbi->regbase + WMT_GOVR_TIMING_H_END);
- writel(h_all, fbi->regbase + WMT_GOVR_TIMING_H_ALL);
- writel(h_sync, fbi->regbase + WMT_GOVR_TIMING_H_SYNC);
+ writel(h_start, fbi->regbase + REG_GOVRH_ACTPX_BG);
+ writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
+ writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
+ writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
- writel(v_start, fbi->regbase + WMT_GOVR_TIMING_V_START);
- writel(v_end, fbi->regbase + WMT_GOVR_TIMING_V_END);
- writel(v_all, fbi->regbase + WMT_GOVR_TIMING_V_ALL);
- writel(v_sync, fbi->regbase + WMT_GOVR_TIMING_V_SYNC);
+ writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
+ writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
+ writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
+ writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
- writel(1, fbi->regbase + WMT_GOVR_TG);
+ writel(1, fbi->regbase + REG_GOVRH_TG_ENABLE);
return 0;
}
@@ -174,7 +239,7 @@ static int wm8505fb_set_par(struct fb_info *info)
wm8505fb_set_timing(info);
writel(fbi->contrast<<16 | fbi->contrast<<8 | fbi->contrast,
- fbi->regbase + WMT_GOVR_CONTRAST);
+ fbi->regbase + REG_GOVRH_CONTRAST);
return 0;
}
@@ -250,8 +315,8 @@ static int wm8505fb_pan_display(struct fb_var_screeninfo *var,
{
struct wm8505fb_info *fbi = to_wm8505fb_info(info);
- writel(var->xoffset, fbi->regbase + WMT_GOVR_XPAN);
- writel(var->yoffset, fbi->regbase + WMT_GOVR_YPAN);
+ writel(var->xoffset, fbi->regbase + REG_GOVRH_VCROP);
+ writel(var->yoffset, fbi->regbase + REG_GOVRH_HCROP);
return 0;
}
@@ -264,7 +329,7 @@ static int wm8505fb_blank(int blank, struct fb_info *info)
wm8505fb_set_timing(info);
break;
default:
- writel(0, fbi->regbase + WMT_GOVR_TIMING_V_SYNC);
+ writel(0, fbi->regbase + REG_GOVRH_HDMI_VBISW);
break;
}
diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/wmt_ge_rops.c
index 4aaeb18..68de46a 100644
--- a/drivers/video/wmt_ge_rops.c
+++ b/drivers/video/wmt_ge_rops.c
@@ -20,29 +20,189 @@
#include <linux/platform_device.h>
#include "fb_draw.h"
-#define GE_COMMAND_OFF 0x00
-#define GE_DEPTH_OFF 0x04
-#define GE_HIGHCOLOR_OFF 0x08
-#define GE_ROPCODE_OFF 0x14
-#define GE_FIRE_OFF 0x18
-#define GE_SRCBASE_OFF 0x20
-#define GE_SRCDISPW_OFF 0x24
-#define GE_SRCDISPH_OFF 0x28
-#define GE_SRCAREAX_OFF 0x2c
-#define GE_SRCAREAY_OFF 0x30
-#define GE_SRCAREAW_OFF 0x34
-#define GE_SRCAREAH_OFF 0x38
-#define GE_DESTBASE_OFF 0x3c
-#define GE_DESTDISPW_OFF 0x40
-#define GE_DESTDISPH_OFF 0x44
-#define GE_DESTAREAX_OFF 0x48
-#define GE_DESTAREAY_OFF 0x4c
-#define GE_DESTAREAW_OFF 0x50
-#define GE_DESTAREAH_OFF 0x54
-#define GE_PAT0C_OFF 0x88 /* Pattern 0 color */
-#define GE_ENABLE_OFF 0xec
-#define GE_INTEN_OFF 0xf0
-#define GE_STATUS_OFF 0xf8
+#define GE_COMMAND 0x0000
+#define GE_COLOR_DEPTH 0x0004
+#define GE_HM_SEL 0x0008
+#define GE_PAT_TRAN_EN 0x000C
+#define GE_FONT_TRAN_EN 0x0010
+#define GE_ROP_CODE 0x0014
+#define GE_FIRE 0x0018
+#define GE_ROP_BG_CODE 0x001C
+#define GE_SRC_BADDR 0x0020
+#define GE_SRC_DISP_W 0x0024
+#define GE_SRC_DISP_H 0x0028
+#define GE_SRC_X_START 0x002C
+#define GE_SRC_Y_START 0x0030
+#define GE_SRC_WIDTH 0x0034
+#define GE_SRC_HEIGHT 0x0038
+#define GE_DES_BADDR 0x003C
+#define GE_DES_DISP_W 0x0040
+#define GE_DES_DISP_H 0x0044
+#define GE_DES_X_START 0x0048
+#define GE_DES_Y_START 0x004C
+#define GE_DES_WIDTH 0x0050
+#define GE_DES_HEIGHT 0x0054
+#define GE_FONT0_BUF 0x0058
+#define GE_FONT1_BUF 0x005C
+#define GE_FONT2_BUF 0x0060
+#define GE_FONT3_BUF 0x0064
+#define GE_PAT0_BUF 0x0068
+#define GE_PAT1_BUF 0x006C
+#define GE_PAT2_BUF 0x0070
+#define GE_PAT3_BUF 0x0074
+#define GE_PAT4_BUF 0x0078
+#define GE_PAT5_BUF 0x007C
+#define GE_PAT6_BUF 0x0080
+#define GE_PAT7_BUF 0x0084
+#define GE_PAT0_COLOR 0x0088
+#define GE_PAT1_COLOR 0x008C
+#define GE_PAT2_COLOR 0x0090
+#define GE_PAT3_COLOR 0x0094
+#define GE_PAT4_COLOR 0x0098
+#define GE_PAT5_COLOR 0x009C
+#define GE_PAT6_COLOR 0x00A0
+#define GE_PAT7_COLOR 0x00A4
+#define GE_PAT8_COLOR 0x00A8
+#define GE_PAT9_COLOR 0x00AC
+#define GE_PAT10_COLOR 0x00B0
+#define GE_PAT11_COLOR 0x00B4
+#define GE_PAT12_COLOR 0x00B8
+#define GE_PAT13_COLOR 0x00BC
+#define GE_PAT14_COLOR 0x00C0
+#define GE_PAT15_COLOR 0x00C4
+#define GE_CK_SEL 0x00C8
+#define GE_SRC_CK 0x00CC
+#define GE_DES_CK 0x00D0
+#define GE_ALPHA_SEL 0x00D4
+#define GE_BITBLT_ALPHA 0x00D8
+#define GE_DES_PATH_EN 0x00DC
+#define GE_ROTATE_MODE 0x00E0
+#define GE_MIRROR_MODE 0x00E4
+#define GE_GE_DELAY 0x00E8
+#define GE_ENABLE 0x00EC
+#define GE_INT_EN 0x00F0
+#define GE_INT_FLAG 0x00F4
+#define GE_STATUS 0x00F8
+#define GE_SWID 0x00FC
+#define GE_LN_X_START 0x0100
+#define GE_LN_X_END 0x0104
+#define GE_LN_Y_START 0x0108
+#define GE_LN_Y_END 0x0110
+#define GE_LN_TCK 0x0114
+#define GE_AMX_CSC_BYPASS 0x0118
+#define GE_C1_COEF 0x011C
+#define GE_LN_STL_TB 0x0120
+#define GE_LN_STL_RTN 0x0124
+#define GE_LN_STL_DATA 0x0128
+#define GE_LN_STL_APA 0x012C
+#define GE_BC_P1X 0x0130
+#define GE_BC_P1Y 0x0134
+#define GE_BC_P2X 0x0138
+#define GE_BC_P2Y 0x013C
+#define GE_BC_P3X 0x0140
+#define GE_BC_P3Y 0x0144
+#define GE_BC_COLOR 0x0148
+#define GE_BC_ALPHA 0x014C
+#define GE_BC_DELTA_T 0x0150
+#define GE_BC_L_STL 0x0154
+#define GE_BC_L_STL_RTN 0x0158
+#define GE_C2_COEF 0x015C
+#define GE_C3_COEF 0x0160
+#define GE_C4_COEF 0x0164
+#define GE_C5_COEF 0x0168
+#define GE_C6_COEF 0x016C
+#define GE_C7_COEF 0x0170
+#define GE_C8_COEF 0x0174
+#define GE_YUV2_Y_BADDR 0x0178
+#define GE_YUV2_C_BADDR 0x017C
+#define GE_VQ_EN 0x0180
+#define GE_VQ_SIZE 0x0184
+#define GE_VQ_UDPTR 0x0188
+#define GE_VQ_BASEADDR 0x018C
+#define GE_VQ_WRSIZE 0x0190
+#define GE_VQ_STADDRW 0x0194
+#define GE_VQ_THR 0x0198
+#define GE_VQ_YUV2_Y_FBW 0x019C
+#define GE_ROP4_EN 0x01A0
+#define GE_ALPHA_PLANE_EN 0x01A4
+#define GE_MASK_BADDR 0x01A8
+#define GE_MASK_DISP_W 0x01AC
+#define GE_MASK_DISP_H 0x01B0
+#define GE_MASK_X_START 0x01B4
+#define GE_MASK_Y_START 0x01B8
+#define GE_MASK_WIDTH 0x01BC
+#define GE_MASK_HEIGHT 0x01C0
+#define GE_DW_MASK_BADDR 0x01C4
+#define GE_ALPHA_PLANE_WBE 0x01C8
+#define GE_YUV2_C_FBW 0x01CC
+#define GE_ADAP_BLEND_EN 0x01D0
+#define GE_SRC_ALPHA_SEL 0x01D4
+#define GE_SRC_BLEND_APA 0x01D8
+#define GE_DES_ALPHA_SEL 0x01DC
+#define GE_DES_BLEND_APA 0x01E0
+#define GE_ADAP_CLAMP_EN 0x01E4
+#define GE_YUV2_C_BLEND_SEL 0x01E8
+#define GE_SRC_INDEP_MODE 0x01EC
+#define GE_C9_COEF 0x01F0
+#define GE_COEF_I 0x01F4
+#define GE_COEF_J 0x01F8
+#define GE_COEF_K 0x01FC
+#define GE_G1_CD 0x0200
+#define GE_G2_CD 0x0204
+#define GE_G1_FG_ADDR 0x0210
+#define GE_G1_BG_ADDR 0x0214
+#define GE_G1_FB_SEL 0x0218
+#define GE_G2_FG_ADDR 0x021C
+#define GE_G2_BG_ADDR 0x0220
+#define GE_G2_FB_SEL 0x0224
+#define GE_G1_X_START 0x0230
+#define GE_G1_X_END 0x0234
+#define GE_G1_Y_START 0x0238
+#define GE_G1_Y_END 0x023C
+#define GE_G2_X_START 0x0240
+#define GE_G2_X_END 0x0244
+#define GE_G2_Y_START 0x0248
+#define GE_G2_Y_END 0x024C
+#define GE_DISP_X_END 0x0250
+#define GE_DISP_Y_END 0x0254
+#define GE_AMX_CB 0x0258
+#define GE_G1_YUV_MODE_EN 0x025C
+#define GE_G2_YUV_MODE_EN 0x0260
+#define GE_G1_YUV_FMT_SEL 0x0264
+#define GE_G1_YUV_OUTP_SEL 0x0268
+#define GE_G2_YUV_FMT_SEL 0x026C
+#define GE_G2_YUV_OUTP_SEL 0x0270
+#define GE_AMX_CSC_CFG 0x0274
+#define GE_AMX_CSC_MODE 0x0278
+#define GE_AMX_Y_SUB_16_EN 0x027C
+#define GE_G1_YUV_ADDR 0x0280
+#define GE_G2_YUV_ADDR 0x0284
+#define GE_G1_CK_EN 0x0298
+#define GE_G2_CK_EN 0x029C
+#define GE_G1_C_KEY 0x02A0
+#define GE_G2_C_KEY 0x02A4
+#define GE_G1_AMX_EN 0x02A8
+#define GE_G2_AMX_EN 0x02AC
+#define GE_CK2_APA 0x02B0
+#define GE_AMX_CTL 0x02B4
+#define GE_CK_APA 0x02B8
+#define GE_FIX_APA 0x02BC
+#define GE_G1_AMX_HM 0x02C0
+#define GE_G2_AMX_HM 0x02C4
+#define GE_NH_DATA 0x02C8
+#define GE_VSYNC_STS 0x02CC
+#define GE_REG_UPD 0x02D0
+#define GE_REG_SEL 0x02D4
+#define GE_REG_AMX2_CTL 0x02D8
+#define GE_FIX2_APA 0x02DC
+#define GE_G1_H_SCALE 0x02E0
+#define GE_G2_H_SCALE 0x02E4
+#define GE_G1_FBW 0x02E8
+#define GE_G1_VCROP 0x02EC
+#define GE_G1_HCROP 0x02F0
+#define GE_G2_FBW 0x02F4
+#define GE_G2_VCROP 0x02F8
+#define GE_G2_HCROP 0x02FC
static void __iomem *regbase;
@@ -65,20 +225,20 @@ void wmt_ge_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
p->fbops->fb_sync(p);
writel(p->var.bits_per_pixel == 32 ? 3 :
- (p->var.bits_per_pixel == 8 ? 0 : 1), regbase + GE_DEPTH_OFF);
- writel(p->var.bits_per_pixel == 15 ? 1 : 0, regbase + GE_HIGHCOLOR_OFF);
- writel(p->fix.smem_start, regbase + GE_DESTBASE_OFF);
- writel(p->var.xres_virtual - 1, regbase + GE_DESTDISPW_OFF);
- writel(p->var.yres_virtual - 1, regbase + GE_DESTDISPH_OFF);
- writel(rect->dx, regbase + GE_DESTAREAX_OFF);
- writel(rect->dy, regbase + GE_DESTAREAY_OFF);
- writel(rect->width - 1, regbase + GE_DESTAREAW_OFF);
- writel(rect->height - 1, regbase + GE_DESTAREAH_OFF);
-
- writel(pat, regbase + GE_PAT0C_OFF);
- writel(1, regbase + GE_COMMAND_OFF);
- writel(rect->rop == ROP_XOR ? 0x5a : 0xf0, regbase + GE_ROPCODE_OFF);
- writel(1, regbase + GE_FIRE_OFF);
+ (p->var.bits_per_pixel == 8 ? 0 : 1), regbase + GE_COLOR_DEPTH);
+ writel(p->var.bits_per_pixel == 15 ? 1 : 0, regbase + GE_HM_SEL);
+ writel(p->fix.smem_start, regbase + GE_DES_BADDR);
+ writel(p->var.xres_virtual - 1, regbase + GE_DES_DISP_W);
+ writel(p->var.yres_virtual - 1, regbase + GE_DES_DISP_H);
+ writel(rect->dx, regbase + GE_DES_X_START);
+ writel(rect->dy, regbase + GE_DES_Y_START);
+ writel(rect->width - 1, regbase + GE_DES_WIDTH);
+ writel(rect->height - 1, regbase + GE_DES_HEIGHT);
+
+ writel(pat, regbase + GE_PAT0_COLOR);
+ writel(1, regbase + GE_COMMAND);
+ writel(rect->rop == ROP_XOR ? 0x5a : 0xf0, regbase + GE_ROP_CODE);
+ writel(1, regbase + GE_FIRE);
}
EXPORT_SYMBOL_GPL(wmt_ge_fillrect);
@@ -91,34 +251,34 @@ void wmt_ge_copyarea(struct fb_info *p, const struct fb_copyarea *area)
p->fbops->fb_sync(p);
writel(p->var.bits_per_pixel > 16 ? 3 :
- (p->var.bits_per_pixel > 8 ? 1 : 0), regbase + GE_DEPTH_OFF);
-
- writel(p->fix.smem_start, regbase + GE_SRCBASE_OFF);
- writel(p->var.xres_virtual - 1, regbase + GE_SRCDISPW_OFF);
- writel(p->var.yres_virtual - 1, regbase + GE_SRCDISPH_OFF);
- writel(area->sx, regbase + GE_SRCAREAX_OFF);
- writel(area->sy, regbase + GE_SRCAREAY_OFF);
- writel(area->width - 1, regbase + GE_SRCAREAW_OFF);
- writel(area->height - 1, regbase + GE_SRCAREAH_OFF);
-
- writel(p->fix.smem_start, regbase + GE_DESTBASE_OFF);
- writel(p->var.xres_virtual - 1, regbase + GE_DESTDISPW_OFF);
- writel(p->var.yres_virtual - 1, regbase + GE_DESTDISPH_OFF);
- writel(area->dx, regbase + GE_DESTAREAX_OFF);
- writel(area->dy, regbase + GE_DESTAREAY_OFF);
- writel(area->width - 1, regbase + GE_DESTAREAW_OFF);
- writel(area->height - 1, regbase + GE_DESTAREAH_OFF);
-
- writel(0xcc, regbase + GE_ROPCODE_OFF);
- writel(1, regbase + GE_COMMAND_OFF);
- writel(1, regbase + GE_FIRE_OFF);
+ (p->var.bits_per_pixel > 8 ? 1 : 0), regbase + GE_COLOR_DEPTH);
+
+ writel(p->fix.smem_start, regbase + GE_SRC_BADDR);
+ writel(p->var.xres_virtual - 1, regbase + GE_SRC_DISP_W);
+ writel(p->var.yres_virtual - 1, regbase + GE_SRC_DISP_H);
+ writel(area->sx, regbase + GE_SRC_X_START);
+ writel(area->sy, regbase + GE_SRC_Y_START);
+ writel(area->width - 1, regbase + GE_SRC_WIDTH);
+ writel(area->height - 1, regbase + GE_SRC_HEIGHT);
+
+ writel(p->fix.smem_start, regbase + GE_DES_BADDR);
+ writel(p->var.xres_virtual - 1, regbase + GE_DES_DISP_W);
+ writel(p->var.yres_virtual - 1, regbase + GE_DES_DISP_H);
+ writel(area->dx, regbase + GE_DES_X_START);
+ writel(area->dy, regbase + GE_DES_Y_START);
+ writel(area->width - 1, regbase + GE_DES_WIDTH);
+ writel(area->height - 1, regbase + GE_DES_HEIGHT);
+
+ writel(0xcc, regbase + GE_ROP_CODE);
+ writel(1, regbase + GE_COMMAND);
+ writel(1, regbase + GE_FIRE);
}
EXPORT_SYMBOL_GPL(wmt_ge_copyarea);
int wmt_ge_sync(struct fb_info *p)
{
int loops = 5000000;
- while ((readl(regbase + GE_STATUS_OFF) & 4) && --loops)
+ while ((readl(regbase + GE_STATUS) & 4) && --loops)
cpu_relax();
return loops > 0 ? 0 : -EBUSY;
}
@@ -146,7 +306,7 @@ static int wmt_ge_rops_probe(struct platform_device *pdev)
return -EBUSY;
}
- writel(1, regbase + GE_ENABLE_OFF);
+ writel(1, regbase + GE_ENABLE);
printk(KERN_INFO "Enabled support for WMT GE raster acceleration\n");
return 0;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 3/4] fb: vt8500: Require a device clock for wm8505fb driver
2013-05-18 9:15 ` Tony Prisk
(?)
@ 2013-05-18 9:15 ` Tony Prisk
-1 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: Florian Tobias Schandinat
Cc: vt8500-wm8505-linux-kernel, linux-arm-kernel, linux-kernel,
tomi.valkeinen, linux-fbdev, Tony Prisk
The wm8505fb driver requires a clock to work properly. Without a clock,
the driver can only initialize the display resolution that was set in
uboot.
This patch updates the driver to get and use a clock, and updates
the devicetree documentation to indicate the requirement for a clock.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
.../devicetree/bindings/video/wm,wm8505-fb.txt | 4 ++-
drivers/video/wm8505fb.c | 30 +++++++++++++++++---
2 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
index 0bcadb2..601416c 100644
--- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -5,6 +5,7 @@ Required properties:
- compatible : "wm,wm8505-fb"
- reg : Should contain 1 register ranges(address and length)
- bits-per-pixel : bit depth of framebuffer (16 or 32)
+- clocks : phandle to DVO clock
Required subnodes:
- display-timings: see display-timing.txt for information
@@ -15,11 +16,12 @@ Example:
compatible = "wm,wm8505-fb";
reg = <0xd8051700 0x200>;
bits-per-pixel = <16>;
+ clocks = <&clkdvo>;
display-timings {
native-mode = <&timing0>;
timing0: 800x480 {
- clock-frequency = <0>; /* unused but required */
+ clock-frequency = <30000000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 167a9e2..f8bffc2 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -14,6 +14,7 @@
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fb.h>
@@ -130,9 +131,11 @@
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
struct wm8505fb_info {
- struct fb_info fb;
- void __iomem *regbase;
- unsigned int contrast;
+ struct fb_info fb;
+ void __iomem *regbase;
+ unsigned int contrast;
+ struct device *dev;
+ struct clk *clk_dvo;
};
@@ -210,6 +213,13 @@ static int wm8505fb_set_par(struct fb_info *info)
if (!fbi)
return -EINVAL;
+ if (info->var.pixclock == 0) {
+ dev_err(fbi->dev, "requested pixclock = 0\n");
+ return -EINVAL;
+ }
+
+ clk_set_rate(fbi->clk_dvo, PICOS2KHZ(info->var.pixclock)*1000);
+
if (info->var.bits_per_pixel == 32) {
info->var.red.offset = 16;
info->var.red.length = 8;
@@ -369,6 +379,8 @@ static int wm8505fb_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ fbi->dev = &pdev->dev;
+
strcpy(fbi->fb.fix.id, DRIVER_NAME);
fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS;
@@ -408,6 +420,14 @@ static int wm8505fb_probe(struct platform_device *pdev)
if (ret)
return ret;
+ fbi->clk_dvo = of_clk_get(pdev->dev.of_node, 0);
+ if (IS_ERR(fbi->clk_dvo)) {
+ dev_err(&pdev->dev, "Error retrieving clock\n");
+ return PTR_ERR(fbi->clk_dvo);
+ }
+
+ clk_prepare_enable(fbi->clk_dvo);
+
fb_videomode_to_var(&fbi->fb.var, &mode);
fbi->fb.var.nonstd = 0;
@@ -421,7 +441,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
fb_mem_virt = dmam_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
GFP_KERNEL);
if (!fb_mem_virt) {
- pr_err("%s: Failed to allocate framebuffer\n", __func__);
+ dev_err(&pdev->dev, "Failed to allocate framebuffer\n");
return -ENOMEM;
}
@@ -480,6 +500,8 @@ static int wm8505fb_remove(struct platform_device *pdev)
unregister_framebuffer(&fbi->fb);
+ clk_disable_unprepare(fbi->clk_dvo);
+
writel(0, fbi->regbase);
if (fbi->fb.cmap.len)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 3/4] fb: vt8500: Require a device clock for wm8505fb driver
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: linux-arm-kernel
The wm8505fb driver requires a clock to work properly. Without a clock,
the driver can only initialize the display resolution that was set in
uboot.
This patch updates the driver to get and use a clock, and updates
the devicetree documentation to indicate the requirement for a clock.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
.../devicetree/bindings/video/wm,wm8505-fb.txt | 4 ++-
drivers/video/wm8505fb.c | 30 +++++++++++++++++---
2 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
index 0bcadb2..601416c 100644
--- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -5,6 +5,7 @@ Required properties:
- compatible : "wm,wm8505-fb"
- reg : Should contain 1 register ranges(address and length)
- bits-per-pixel : bit depth of framebuffer (16 or 32)
+- clocks : phandle to DVO clock
Required subnodes:
- display-timings: see display-timing.txt for information
@@ -15,11 +16,12 @@ Example:
compatible = "wm,wm8505-fb";
reg = <0xd8051700 0x200>;
bits-per-pixel = <16>;
+ clocks = <&clkdvo>;
display-timings {
native-mode = <&timing0>;
timing0: 800x480 {
- clock-frequency = <0>; /* unused but required */
+ clock-frequency = <30000000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 167a9e2..f8bffc2 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -14,6 +14,7 @@
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fb.h>
@@ -130,9 +131,11 @@
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
struct wm8505fb_info {
- struct fb_info fb;
- void __iomem *regbase;
- unsigned int contrast;
+ struct fb_info fb;
+ void __iomem *regbase;
+ unsigned int contrast;
+ struct device *dev;
+ struct clk *clk_dvo;
};
@@ -210,6 +213,13 @@ static int wm8505fb_set_par(struct fb_info *info)
if (!fbi)
return -EINVAL;
+ if (info->var.pixclock = 0) {
+ dev_err(fbi->dev, "requested pixclock = 0\n");
+ return -EINVAL;
+ }
+
+ clk_set_rate(fbi->clk_dvo, PICOS2KHZ(info->var.pixclock)*1000);
+
if (info->var.bits_per_pixel = 32) {
info->var.red.offset = 16;
info->var.red.length = 8;
@@ -369,6 +379,8 @@ static int wm8505fb_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ fbi->dev = &pdev->dev;
+
strcpy(fbi->fb.fix.id, DRIVER_NAME);
fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS;
@@ -408,6 +420,14 @@ static int wm8505fb_probe(struct platform_device *pdev)
if (ret)
return ret;
+ fbi->clk_dvo = of_clk_get(pdev->dev.of_node, 0);
+ if (IS_ERR(fbi->clk_dvo)) {
+ dev_err(&pdev->dev, "Error retrieving clock\n");
+ return PTR_ERR(fbi->clk_dvo);
+ }
+
+ clk_prepare_enable(fbi->clk_dvo);
+
fb_videomode_to_var(&fbi->fb.var, &mode);
fbi->fb.var.nonstd = 0;
@@ -421,7 +441,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
fb_mem_virt = dmam_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
GFP_KERNEL);
if (!fb_mem_virt) {
- pr_err("%s: Failed to allocate framebuffer\n", __func__);
+ dev_err(&pdev->dev, "Failed to allocate framebuffer\n");
return -ENOMEM;
}
@@ -480,6 +500,8 @@ static int wm8505fb_remove(struct platform_device *pdev)
unregister_framebuffer(&fbi->fb);
+ clk_disable_unprepare(fbi->clk_dvo);
+
writel(0, fbi->regbase);
if (fbi->fb.cmap.len)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 3/4] fb: vt8500: Require a device clock for wm8505fb driver
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: linux-arm-kernel
The wm8505fb driver requires a clock to work properly. Without a clock,
the driver can only initialize the display resolution that was set in
uboot.
This patch updates the driver to get and use a clock, and updates
the devicetree documentation to indicate the requirement for a clock.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
.../devicetree/bindings/video/wm,wm8505-fb.txt | 4 ++-
drivers/video/wm8505fb.c | 30 +++++++++++++++++---
2 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
index 0bcadb2..601416c 100644
--- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -5,6 +5,7 @@ Required properties:
- compatible : "wm,wm8505-fb"
- reg : Should contain 1 register ranges(address and length)
- bits-per-pixel : bit depth of framebuffer (16 or 32)
+- clocks : phandle to DVO clock
Required subnodes:
- display-timings: see display-timing.txt for information
@@ -15,11 +16,12 @@ Example:
compatible = "wm,wm8505-fb";
reg = <0xd8051700 0x200>;
bits-per-pixel = <16>;
+ clocks = <&clkdvo>;
display-timings {
native-mode = <&timing0>;
timing0: 800x480 {
- clock-frequency = <0>; /* unused but required */
+ clock-frequency = <30000000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 167a9e2..f8bffc2 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -14,6 +14,7 @@
* GNU General Public License for more details.
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fb.h>
@@ -130,9 +131,11 @@
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
struct wm8505fb_info {
- struct fb_info fb;
- void __iomem *regbase;
- unsigned int contrast;
+ struct fb_info fb;
+ void __iomem *regbase;
+ unsigned int contrast;
+ struct device *dev;
+ struct clk *clk_dvo;
};
@@ -210,6 +213,13 @@ static int wm8505fb_set_par(struct fb_info *info)
if (!fbi)
return -EINVAL;
+ if (info->var.pixclock == 0) {
+ dev_err(fbi->dev, "requested pixclock = 0\n");
+ return -EINVAL;
+ }
+
+ clk_set_rate(fbi->clk_dvo, PICOS2KHZ(info->var.pixclock)*1000);
+
if (info->var.bits_per_pixel == 32) {
info->var.red.offset = 16;
info->var.red.length = 8;
@@ -369,6 +379,8 @@ static int wm8505fb_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ fbi->dev = &pdev->dev;
+
strcpy(fbi->fb.fix.id, DRIVER_NAME);
fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS;
@@ -408,6 +420,14 @@ static int wm8505fb_probe(struct platform_device *pdev)
if (ret)
return ret;
+ fbi->clk_dvo = of_clk_get(pdev->dev.of_node, 0);
+ if (IS_ERR(fbi->clk_dvo)) {
+ dev_err(&pdev->dev, "Error retrieving clock\n");
+ return PTR_ERR(fbi->clk_dvo);
+ }
+
+ clk_prepare_enable(fbi->clk_dvo);
+
fb_videomode_to_var(&fbi->fb.var, &mode);
fbi->fb.var.nonstd = 0;
@@ -421,7 +441,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
fb_mem_virt = dmam_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
GFP_KERNEL);
if (!fb_mem_virt) {
- pr_err("%s: Failed to allocate framebuffer\n", __func__);
+ dev_err(&pdev->dev, "Failed to allocate framebuffer\n");
return -ENOMEM;
}
@@ -480,6 +500,8 @@ static int wm8505fb_remove(struct platform_device *pdev)
unregister_framebuffer(&fbi->fb);
+ clk_disable_unprepare(fbi->clk_dvo);
+
writel(0, fbi->regbase);
if (fbi->fb.cmap.len)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
2013-05-18 9:15 ` Tony Prisk
(?)
@ 2013-05-18 9:15 ` Tony Prisk
-1 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: Florian Tobias Schandinat
Cc: vt8500-wm8505-linux-kernel, linux-arm-kernel, linux-kernel,
tomi.valkeinen, linux-fbdev, Tony Prisk
The APC8750 does not support an LCD panel, but provides a VGA connector.
This patch adds support for the VGA interface, and defines an optional
devicetree property to specify the output interface. The default if not
specified is LCD for backward compatibility.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
.../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++
drivers/video/wm8505fb.c | 31 ++++++++++++++++++--
2 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
index 601416c..9f1d648 100644
--- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -7,6 +7,10 @@ Required properties:
- bits-per-pixel : bit depth of framebuffer (16 or 32)
- clocks : phandle to DVO clock
+Optional properties:
+- output-interface : the interface the fb should output on. Valid values are
+ "lcd" or "vga". If not specified, the default is "lcd".
+
Required subnodes:
- display-timings: see display-timing.txt for information
@@ -17,6 +21,7 @@ Example:
reg = <0xd8051700 0x200>;
bits-per-pixel = <16>;
clocks = <&clkdvo>;
+ output-interface = "vga";
display-timings {
native-mode = <&timing0>;
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index f8bffc2..d1f7f33 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -130,12 +130,17 @@
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
+
+#define INTERFACE_LCD 1
+#define INTERFACE_VGA 2
+
struct wm8505fb_info {
struct fb_info fb;
void __iomem *regbase;
unsigned int contrast;
struct device *dev;
struct clk *clk_dvo;
+ int interface;
};
@@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info)
* 0x31C sets the correct color mode (RGB565) for WM8650
* Bit 8+9 (0x300) are ignored on WM8505 as reserved
*/
- writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
+ if (fbi->interface == INTERFACE_VGA)
+ writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB);
+ else
+ writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
+
writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
/* Virtual buffer size */
@@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
/* black magic ;) */
writel(0xf, fbi->regbase + REG_GOVRH_FHI);
- writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
+
+ if (fbi->interface == INTERFACE_VGA)
+ writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
+ else
+ writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
+
writel(1, fbi->regbase + REG_GOVRH_MIF);
writel(1, fbi->regbase + REG_GOVRH_REG_STS);
@@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info)
writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
+ if (fbi->interface == INTERFACE_VGA)
+ writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
+ if (fbi->interface == INTERFACE_VGA)
+ writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW);
writel(1, fbi->regbase + REG_GOVRH_TG_ENABLE);
@@ -371,6 +389,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
dma_addr_t fb_mem_phys;
unsigned long fb_mem_len;
void *fb_mem_virt;
+ const char *intf;
fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) +
sizeof(u32) * 16, GFP_KERNEL);
@@ -428,6 +447,14 @@ static int wm8505fb_probe(struct platform_device *pdev)
clk_prepare_enable(fbi->clk_dvo);
+ fbi->interface = INTERFACE_LCD;
+ ret = of_property_read_string(pdev->dev.of_node, "output-interface",
+ &intf);
+ if (!ret) {
+ if (!strcmp(intf, "vga"))
+ fbi->interface = INTERFACE_VGA;
+ }
+
fb_videomode_to_var(&fbi->fb.var, &mode);
fbi->fb.var.nonstd = 0;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: linux-arm-kernel
The APC8750 does not support an LCD panel, but provides a VGA connector.
This patch adds support for the VGA interface, and defines an optional
devicetree property to specify the output interface. The default if not
specified is LCD for backward compatibility.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
.../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++
drivers/video/wm8505fb.c | 31 ++++++++++++++++++--
2 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
index 601416c..9f1d648 100644
--- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -7,6 +7,10 @@ Required properties:
- bits-per-pixel : bit depth of framebuffer (16 or 32)
- clocks : phandle to DVO clock
+Optional properties:
+- output-interface : the interface the fb should output on. Valid values are
+ "lcd" or "vga". If not specified, the default is "lcd".
+
Required subnodes:
- display-timings: see display-timing.txt for information
@@ -17,6 +21,7 @@ Example:
reg = <0xd8051700 0x200>;
bits-per-pixel = <16>;
clocks = <&clkdvo>;
+ output-interface = "vga";
display-timings {
native-mode = <&timing0>;
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index f8bffc2..d1f7f33 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -130,12 +130,17 @@
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
+
+#define INTERFACE_LCD 1
+#define INTERFACE_VGA 2
+
struct wm8505fb_info {
struct fb_info fb;
void __iomem *regbase;
unsigned int contrast;
struct device *dev;
struct clk *clk_dvo;
+ int interface;
};
@@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info)
* 0x31C sets the correct color mode (RGB565) for WM8650
* Bit 8+9 (0x300) are ignored on WM8505 as reserved
*/
- writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
+ if (fbi->interface = INTERFACE_VGA)
+ writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB);
+ else
+ writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
+
writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
/* Virtual buffer size */
@@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
/* black magic ;) */
writel(0xf, fbi->regbase + REG_GOVRH_FHI);
- writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
+
+ if (fbi->interface = INTERFACE_VGA)
+ writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
+ else
+ writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
+
writel(1, fbi->regbase + REG_GOVRH_MIF);
writel(1, fbi->regbase + REG_GOVRH_REG_STS);
@@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info)
writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
+ if (fbi->interface = INTERFACE_VGA)
+ writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
+ if (fbi->interface = INTERFACE_VGA)
+ writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW);
writel(1, fbi->regbase + REG_GOVRH_TG_ENABLE);
@@ -371,6 +389,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
dma_addr_t fb_mem_phys;
unsigned long fb_mem_len;
void *fb_mem_virt;
+ const char *intf;
fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) +
sizeof(u32) * 16, GFP_KERNEL);
@@ -428,6 +447,14 @@ static int wm8505fb_probe(struct platform_device *pdev)
clk_prepare_enable(fbi->clk_dvo);
+ fbi->interface = INTERFACE_LCD;
+ ret = of_property_read_string(pdev->dev.of_node, "output-interface",
+ &intf);
+ if (!ret) {
+ if (!strcmp(intf, "vga"))
+ fbi->interface = INTERFACE_VGA;
+ }
+
fb_videomode_to_var(&fbi->fb.var, &mode);
fbi->fb.var.nonstd = 0;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
@ 2013-05-18 9:15 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 9:15 UTC (permalink / raw)
To: linux-arm-kernel
The APC8750 does not support an LCD panel, but provides a VGA connector.
This patch adds support for the VGA interface, and defines an optional
devicetree property to specify the output interface. The default if not
specified is LCD for backward compatibility.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
.../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++
drivers/video/wm8505fb.c | 31 ++++++++++++++++++--
2 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
index 601416c..9f1d648 100644
--- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -7,6 +7,10 @@ Required properties:
- bits-per-pixel : bit depth of framebuffer (16 or 32)
- clocks : phandle to DVO clock
+Optional properties:
+- output-interface : the interface the fb should output on. Valid values are
+ "lcd" or "vga". If not specified, the default is "lcd".
+
Required subnodes:
- display-timings: see display-timing.txt for information
@@ -17,6 +21,7 @@ Example:
reg = <0xd8051700 0x200>;
bits-per-pixel = <16>;
clocks = <&clkdvo>;
+ output-interface = "vga";
display-timings {
native-mode = <&timing0>;
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index f8bffc2..d1f7f33 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -130,12 +130,17 @@
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
+
+#define INTERFACE_LCD 1
+#define INTERFACE_VGA 2
+
struct wm8505fb_info {
struct fb_info fb;
void __iomem *regbase;
unsigned int contrast;
struct device *dev;
struct clk *clk_dvo;
+ int interface;
};
@@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info)
* 0x31C sets the correct color mode (RGB565) for WM8650
* Bit 8+9 (0x300) are ignored on WM8505 as reserved
*/
- writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
+ if (fbi->interface == INTERFACE_VGA)
+ writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB);
+ else
+ writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
+
writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
/* Virtual buffer size */
@@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
/* black magic ;) */
writel(0xf, fbi->regbase + REG_GOVRH_FHI);
- writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
+
+ if (fbi->interface == INTERFACE_VGA)
+ writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
+ else
+ writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
+
writel(1, fbi->regbase + REG_GOVRH_MIF);
writel(1, fbi->regbase + REG_GOVRH_REG_STS);
@@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info)
writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
+ if (fbi->interface == INTERFACE_VGA)
+ writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
+ if (fbi->interface == INTERFACE_VGA)
+ writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW);
writel(1, fbi->regbase + REG_GOVRH_TG_ENABLE);
@@ -371,6 +389,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
dma_addr_t fb_mem_phys;
unsigned long fb_mem_len;
void *fb_mem_virt;
+ const char *intf;
fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) +
sizeof(u32) * 16, GFP_KERNEL);
@@ -428,6 +447,14 @@ static int wm8505fb_probe(struct platform_device *pdev)
clk_prepare_enable(fbi->clk_dvo);
+ fbi->interface = INTERFACE_LCD;
+ ret = of_property_read_string(pdev->dev.of_node, "output-interface",
+ &intf);
+ if (!ret) {
+ if (!strcmp(intf, "vga"))
+ fbi->interface = INTERFACE_VGA;
+ }
+
fb_videomode_to_var(&fbi->fb.var, &mode);
fbi->fb.var.nonstd = 0;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
2013-05-18 9:15 ` Tony Prisk
(?)
@ 2013-05-18 13:28 ` Alexey Charkov
-1 siblings, 0 replies; 27+ messages in thread
From: Alexey Charkov @ 2013-05-18 13:28 UTC (permalink / raw)
To: VT8500/WM8505 Linux Kernel
Cc: Florian Tobias Schandinat, linux-arm-kernel, linux-kernel,
tomi.valkeinen, linux-fbdev, Tony Prisk
2013/5/18 Tony Prisk <linux@prisktech.co.nz>:
> The APC8750 does not support an LCD panel, but provides a VGA connector.
> This patch adds support for the VGA interface, and defines an optional
> devicetree property to specify the output interface. The default if not
> specified is LCD for backward compatibility.
>
> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> ---
> .../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++
> drivers/video/wm8505fb.c | 31 ++++++++++++++++++--
> 2 files changed, 34 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
> index 601416c..9f1d648 100644
> --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
> +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
> @@ -7,6 +7,10 @@ Required properties:
> - bits-per-pixel : bit depth of framebuffer (16 or 32)
> - clocks : phandle to DVO clock
>
> +Optional properties:
> +- output-interface : the interface the fb should output on. Valid values are
> + "lcd" or "vga". If not specified, the default is "lcd".
> +
> Required subnodes:
> - display-timings: see display-timing.txt for information
>
> @@ -17,6 +21,7 @@ Example:
> reg = <0xd8051700 0x200>;
> bits-per-pixel = <16>;
> clocks = <&clkdvo>;
> + output-interface = "vga";
>
> display-timings {
> native-mode = <&timing0>;
> diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
> index f8bffc2..d1f7f33 100644
> --- a/drivers/video/wm8505fb.c
> +++ b/drivers/video/wm8505fb.c
> @@ -130,12 +130,17 @@
>
> #define to_wm8505fb_info(__info) container_of(__info, \
> struct wm8505fb_info, fb)
> +
> +#define INTERFACE_LCD 1
> +#define INTERFACE_VGA 2
> +
> struct wm8505fb_info {
> struct fb_info fb;
> void __iomem *regbase;
> unsigned int contrast;
> struct device *dev;
> struct clk *clk_dvo;
> + int interface;
> };
>
>
> @@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info)
> * 0x31C sets the correct color mode (RGB565) for WM8650
> * Bit 8+9 (0x300) are ignored on WM8505 as reserved
> */
> - writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
> + if (fbi->interface == INTERFACE_VGA)
> + writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB);
> + else
> + writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
> +
> writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
Tony,
Would it be possible to also define known bit offsets for those
registers, while you are at this? It would probably reduce the black
magic quite a bit :)
> /* Virtual buffer size */
> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
>
> /* black magic ;) */
> writel(0xf, fbi->regbase + REG_GOVRH_FHI);
> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
> +
> + if (fbi->interface == INTERFACE_VGA)
> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
> + else
> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
I don't remember if HDMI is yet another option for this register or
not... If it is, it would probably warrant defining fbi->interface as
an enum and changing this if-else into a switch statement to let the
compiler add its checks/warnings.
> writel(1, fbi->regbase + REG_GOVRH_MIF);
> writel(1, fbi->regbase + REG_GOVRH_REG_STS);
>
> @@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info)
> writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
> writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
> writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
> + if (fbi->interface == INTERFACE_VGA)
> + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
Will it misbehave on LCD if you write to the VGA register unconditionally?
> writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
> writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
> writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
> writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
> + if (fbi->interface == INTERFACE_VGA)
> + writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW);
Same here. I would assume that setting the pixclock should not hurt
LCD, which would then simplify the code a little.
Thanks,
Alexey
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
@ 2013-05-18 13:28 ` Alexey Charkov
0 siblings, 0 replies; 27+ messages in thread
From: Alexey Charkov @ 2013-05-18 13:28 UTC (permalink / raw)
To: linux-arm-kernel
2013/5/18 Tony Prisk <linux@prisktech.co.nz>:
> The APC8750 does not support an LCD panel, but provides a VGA connector.
> This patch adds support for the VGA interface, and defines an optional
> devicetree property to specify the output interface. The default if not
> specified is LCD for backward compatibility.
>
> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> ---
> .../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++
> drivers/video/wm8505fb.c | 31 ++++++++++++++++++--
> 2 files changed, 34 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
> index 601416c..9f1d648 100644
> --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
> +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
> @@ -7,6 +7,10 @@ Required properties:
> - bits-per-pixel : bit depth of framebuffer (16 or 32)
> - clocks : phandle to DVO clock
>
> +Optional properties:
> +- output-interface : the interface the fb should output on. Valid values are
> + "lcd" or "vga". If not specified, the default is "lcd".
> +
> Required subnodes:
> - display-timings: see display-timing.txt for information
>
> @@ -17,6 +21,7 @@ Example:
> reg = <0xd8051700 0x200>;
> bits-per-pixel = <16>;
> clocks = <&clkdvo>;
> + output-interface = "vga";
>
> display-timings {
> native-mode = <&timing0>;
> diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
> index f8bffc2..d1f7f33 100644
> --- a/drivers/video/wm8505fb.c
> +++ b/drivers/video/wm8505fb.c
> @@ -130,12 +130,17 @@
>
> #define to_wm8505fb_info(__info) container_of(__info, \
> struct wm8505fb_info, fb)
> +
> +#define INTERFACE_LCD 1
> +#define INTERFACE_VGA 2
> +
> struct wm8505fb_info {
> struct fb_info fb;
> void __iomem *regbase;
> unsigned int contrast;
> struct device *dev;
> struct clk *clk_dvo;
> + int interface;
> };
>
>
> @@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info)
> * 0x31C sets the correct color mode (RGB565) for WM8650
> * Bit 8+9 (0x300) are ignored on WM8505 as reserved
> */
> - writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
> + if (fbi->interface = INTERFACE_VGA)
> + writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB);
> + else
> + writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
> +
> writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
Tony,
Would it be possible to also define known bit offsets for those
registers, while you are at this? It would probably reduce the black
magic quite a bit :)
> /* Virtual buffer size */
> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
>
> /* black magic ;) */
> writel(0xf, fbi->regbase + REG_GOVRH_FHI);
> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
> +
> + if (fbi->interface = INTERFACE_VGA)
> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
> + else
> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
I don't remember if HDMI is yet another option for this register or
not... If it is, it would probably warrant defining fbi->interface as
an enum and changing this if-else into a switch statement to let the
compiler add its checks/warnings.
> writel(1, fbi->regbase + REG_GOVRH_MIF);
> writel(1, fbi->regbase + REG_GOVRH_REG_STS);
>
> @@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info)
> writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
> writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
> writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
> + if (fbi->interface = INTERFACE_VGA)
> + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
Will it misbehave on LCD if you write to the VGA register unconditionally?
> writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
> writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
> writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
> writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
> + if (fbi->interface = INTERFACE_VGA)
> + writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW);
Same here. I would assume that setting the pixclock should not hurt
LCD, which would then simplify the code a little.
Thanks,
Alexey
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
@ 2013-05-18 13:28 ` Alexey Charkov
0 siblings, 0 replies; 27+ messages in thread
From: Alexey Charkov @ 2013-05-18 13:28 UTC (permalink / raw)
To: linux-arm-kernel
2013/5/18 Tony Prisk <linux@prisktech.co.nz>:
> The APC8750 does not support an LCD panel, but provides a VGA connector.
> This patch adds support for the VGA interface, and defines an optional
> devicetree property to specify the output interface. The default if not
> specified is LCD for backward compatibility.
>
> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> ---
> .../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++
> drivers/video/wm8505fb.c | 31 ++++++++++++++++++--
> 2 files changed, 34 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
> index 601416c..9f1d648 100644
> --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
> +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
> @@ -7,6 +7,10 @@ Required properties:
> - bits-per-pixel : bit depth of framebuffer (16 or 32)
> - clocks : phandle to DVO clock
>
> +Optional properties:
> +- output-interface : the interface the fb should output on. Valid values are
> + "lcd" or "vga". If not specified, the default is "lcd".
> +
> Required subnodes:
> - display-timings: see display-timing.txt for information
>
> @@ -17,6 +21,7 @@ Example:
> reg = <0xd8051700 0x200>;
> bits-per-pixel = <16>;
> clocks = <&clkdvo>;
> + output-interface = "vga";
>
> display-timings {
> native-mode = <&timing0>;
> diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
> index f8bffc2..d1f7f33 100644
> --- a/drivers/video/wm8505fb.c
> +++ b/drivers/video/wm8505fb.c
> @@ -130,12 +130,17 @@
>
> #define to_wm8505fb_info(__info) container_of(__info, \
> struct wm8505fb_info, fb)
> +
> +#define INTERFACE_LCD 1
> +#define INTERFACE_VGA 2
> +
> struct wm8505fb_info {
> struct fb_info fb;
> void __iomem *regbase;
> unsigned int contrast;
> struct device *dev;
> struct clk *clk_dvo;
> + int interface;
> };
>
>
> @@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info)
> * 0x31C sets the correct color mode (RGB565) for WM8650
> * Bit 8+9 (0x300) are ignored on WM8505 as reserved
> */
> - writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
> + if (fbi->interface == INTERFACE_VGA)
> + writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB);
> + else
> + writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
> +
> writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
Tony,
Would it be possible to also define known bit offsets for those
registers, while you are at this? It would probably reduce the black
magic quite a bit :)
> /* Virtual buffer size */
> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
>
> /* black magic ;) */
> writel(0xf, fbi->regbase + REG_GOVRH_FHI);
> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
> +
> + if (fbi->interface == INTERFACE_VGA)
> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
> + else
> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
I don't remember if HDMI is yet another option for this register or
not... If it is, it would probably warrant defining fbi->interface as
an enum and changing this if-else into a switch statement to let the
compiler add its checks/warnings.
> writel(1, fbi->regbase + REG_GOVRH_MIF);
> writel(1, fbi->regbase + REG_GOVRH_REG_STS);
>
> @@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info)
> writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
> writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
> writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
> + if (fbi->interface == INTERFACE_VGA)
> + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
Will it misbehave on LCD if you write to the VGA register unconditionally?
> writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
> writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
> writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
> writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
> + if (fbi->interface == INTERFACE_VGA)
> + writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW);
Same here. I would assume that setting the pixclock should not hurt
LCD, which would then simplify the code a little.
Thanks,
Alexey
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
2013-05-18 13:28 ` Alexey Charkov
(?)
@ 2013-05-18 13:41 ` Andy Chernyak
-1 siblings, 0 replies; 27+ messages in thread
From: Andy Chernyak @ 2013-05-18 13:41 UTC (permalink / raw)
To: vt8500-wm8505-linux-kernel
Cc: Alexey Charkov, Florian Tobias Schandinat, linux-arm-kernel,
linux-kernel, tomi.valkeinen, linux-fbdev, Tony Prisk
On 05/18/2013 03:28 PM, Alexey Charkov wrote:
> 2013/5/18 Tony Prisk <linux@prisktech.co.nz>:
>
>> /* Virtual buffer size */
>> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
>>
>> /* black magic ;) */
>> writel(0xf, fbi->regbase + REG_GOVRH_FHI);
>> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
>> +
>> + if (fbi->interface == INTERFACE_VGA)
>> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
>> + else
>> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
> I don't remember if HDMI is yet another option for this register or
> not... If it is, it would probably warrant defining fbi->interface as
> an enum and changing this if-else into a switch statement to let the
> compiler add its checks/warnings.
HDMI output can work simultaneously with LCD (on 8850 at least), which
fbi->interface in its current form would not allow to express.
> + if (fbi->interface == INTERFACE_VGA)
> + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
> Will it misbehave on LCD if you write to the VGA register unconditionally?
>
Can we have 3 flags, something like LCD_ON, VGA_ON, HDMI_ON instead of
enum for video interface selection?
Regards,
Andy.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
@ 2013-05-18 13:41 ` Andy Chernyak
0 siblings, 0 replies; 27+ messages in thread
From: Andy Chernyak @ 2013-05-18 13:41 UTC (permalink / raw)
To: linux-arm-kernel
On 05/18/2013 03:28 PM, Alexey Charkov wrote:
> 2013/5/18 Tony Prisk <linux@prisktech.co.nz>:
>
>> /* Virtual buffer size */
>> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
>>
>> /* black magic ;) */
>> writel(0xf, fbi->regbase + REG_GOVRH_FHI);
>> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
>> +
>> + if (fbi->interface = INTERFACE_VGA)
>> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
>> + else
>> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
> I don't remember if HDMI is yet another option for this register or
> not... If it is, it would probably warrant defining fbi->interface as
> an enum and changing this if-else into a switch statement to let the
> compiler add its checks/warnings.
HDMI output can work simultaneously with LCD (on 8850 at least), which
fbi->interface in its current form would not allow to express.
> + if (fbi->interface = INTERFACE_VGA)
> + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
> Will it misbehave on LCD if you write to the VGA register unconditionally?
>
Can we have 3 flags, something like LCD_ON, VGA_ON, HDMI_ON instead of
enum for video interface selection?
Regards,
Andy.
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
@ 2013-05-18 13:41 ` Andy Chernyak
0 siblings, 0 replies; 27+ messages in thread
From: Andy Chernyak @ 2013-05-18 13:41 UTC (permalink / raw)
To: linux-arm-kernel
On 05/18/2013 03:28 PM, Alexey Charkov wrote:
> 2013/5/18 Tony Prisk <linux@prisktech.co.nz>:
>
>> /* Virtual buffer size */
>> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
>>
>> /* black magic ;) */
>> writel(0xf, fbi->regbase + REG_GOVRH_FHI);
>> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
>> +
>> + if (fbi->interface == INTERFACE_VGA)
>> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
>> + else
>> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
> I don't remember if HDMI is yet another option for this register or
> not... If it is, it would probably warrant defining fbi->interface as
> an enum and changing this if-else into a switch statement to let the
> compiler add its checks/warnings.
HDMI output can work simultaneously with LCD (on 8850 at least), which
fbi->interface in its current form would not allow to express.
> + if (fbi->interface == INTERFACE_VGA)
> + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
> Will it misbehave on LCD if you write to the VGA register unconditionally?
>
Can we have 3 flags, something like LCD_ON, VGA_ON, HDMI_ON instead of
enum for video interface selection?
Regards,
Andy.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
2013-05-18 13:28 ` Alexey Charkov
(?)
@ 2013-05-18 19:51 ` Tony Prisk
-1 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 19:51 UTC (permalink / raw)
To: Alexey Charkov
Cc: VT8500/WM8505 Linux Kernel, Florian Tobias Schandinat,
linux-arm-kernel, linux-kernel, tomi.valkeinen, linux-fbdev
On 19/05/13 01:28, Alexey Charkov wrote:
> 2013/5/18 Tony Prisk <linux@prisktech.co.nz>:
>> The APC8750 does not support an LCD panel, but provides a VGA connector.
>> This patch adds support for the VGA interface, and defines an optional
>> devicetree property to specify the output interface. The default if not
>> specified is LCD for backward compatibility.
>>
>> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
>> ---
>> .../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++
>> drivers/video/wm8505fb.c | 31 ++++++++++++++++++--
>> 2 files changed, 34 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
>> index 601416c..9f1d648 100644
>> --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
>> +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
>> @@ -7,6 +7,10 @@ Required properties:
>> - bits-per-pixel : bit depth of framebuffer (16 or 32)
>> - clocks : phandle to DVO clock
>>
>> +Optional properties:
>> +- output-interface : the interface the fb should output on. Valid values are
>> + "lcd" or "vga". If not specified, the default is "lcd".
>> +
>> Required subnodes:
>> - display-timings: see display-timing.txt for information
>>
>> @@ -17,6 +21,7 @@ Example:
>> reg = <0xd8051700 0x200>;
>> bits-per-pixel = <16>;
>> clocks = <&clkdvo>;
>> + output-interface = "vga";
>>
>> display-timings {
>> native-mode = <&timing0>;
>> diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
>> index f8bffc2..d1f7f33 100644
>> --- a/drivers/video/wm8505fb.c
>> +++ b/drivers/video/wm8505fb.c
>> @@ -130,12 +130,17 @@
>>
>> #define to_wm8505fb_info(__info) container_of(__info, \
>> struct wm8505fb_info, fb)
>> +
>> +#define INTERFACE_LCD 1
>> +#define INTERFACE_VGA 2
>> +
>> struct wm8505fb_info {
>> struct fb_info fb;
>> void __iomem *regbase;
>> unsigned int contrast;
>> struct device *dev;
>> struct clk *clk_dvo;
>> + int interface;
>> };
>>
>>
>> @@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info)
>> * 0x31C sets the correct color mode (RGB565) for WM8650
>> * Bit 8+9 (0x300) are ignored on WM8505 as reserved
>> */
>> - writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
>> + if (fbi->interface == INTERFACE_VGA)
>> + writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB);
>> + else
>> + writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
>> +
>> writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
> Tony,
>
> Would it be possible to also define known bit offsets for those
> registers, while you are at this? It would probably reduce the black
> magic quite a bit :)
On my list of things to do :)
>> /* Virtual buffer size */
>> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
>>
>> /* black magic ;) */
>> writel(0xf, fbi->regbase + REG_GOVRH_FHI);
>> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
>> +
>> + if (fbi->interface == INTERFACE_VGA)
>> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
>> + else
>> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
> I don't remember if HDMI is yet another option for this register or
> not... If it is, it would probably warrant defining fbi->interface as
> an enum and changing this if-else into a switch statement to let the
> compiler add its checks/warnings.
This register defines the h/v syncpolarity and enable/disable for DVO.
>
>> writel(1, fbi->regbase + REG_GOVRH_MIF);
>> writel(1, fbi->regbase + REG_GOVRH_REG_STS);
>>
>> @@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info)
>> writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
>> writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
>> writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
>> + if (fbi->interface == INTERFACE_VGA)
>> + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
> Will it misbehave on LCD if you write to the VGA register unconditionally?
Don't know - wouldn't imagine so. I will test it and see.
>
>> writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
>> writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
>> writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
>> writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
>> + if (fbi->interface == INTERFACE_VGA)
>> + writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW);
> Same here. I would assume that setting the pixclock should not hurt
> LCD, which would then simplify the code a little.
>
> Thanks,
> Alexey
Regards
Tony Prisk
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
@ 2013-05-18 19:51 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 19:51 UTC (permalink / raw)
To: linux-arm-kernel
On 19/05/13 01:28, Alexey Charkov wrote:
> 2013/5/18 Tony Prisk <linux@prisktech.co.nz>:
>> The APC8750 does not support an LCD panel, but provides a VGA connector.
>> This patch adds support for the VGA interface, and defines an optional
>> devicetree property to specify the output interface. The default if not
>> specified is LCD for backward compatibility.
>>
>> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
>> ---
>> .../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++
>> drivers/video/wm8505fb.c | 31 ++++++++++++++++++--
>> 2 files changed, 34 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
>> index 601416c..9f1d648 100644
>> --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
>> +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
>> @@ -7,6 +7,10 @@ Required properties:
>> - bits-per-pixel : bit depth of framebuffer (16 or 32)
>> - clocks : phandle to DVO clock
>>
>> +Optional properties:
>> +- output-interface : the interface the fb should output on. Valid values are
>> + "lcd" or "vga". If not specified, the default is "lcd".
>> +
>> Required subnodes:
>> - display-timings: see display-timing.txt for information
>>
>> @@ -17,6 +21,7 @@ Example:
>> reg = <0xd8051700 0x200>;
>> bits-per-pixel = <16>;
>> clocks = <&clkdvo>;
>> + output-interface = "vga";
>>
>> display-timings {
>> native-mode = <&timing0>;
>> diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
>> index f8bffc2..d1f7f33 100644
>> --- a/drivers/video/wm8505fb.c
>> +++ b/drivers/video/wm8505fb.c
>> @@ -130,12 +130,17 @@
>>
>> #define to_wm8505fb_info(__info) container_of(__info, \
>> struct wm8505fb_info, fb)
>> +
>> +#define INTERFACE_LCD 1
>> +#define INTERFACE_VGA 2
>> +
>> struct wm8505fb_info {
>> struct fb_info fb;
>> void __iomem *regbase;
>> unsigned int contrast;
>> struct device *dev;
>> struct clk *clk_dvo;
>> + int interface;
>> };
>>
>>
>> @@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info)
>> * 0x31C sets the correct color mode (RGB565) for WM8650
>> * Bit 8+9 (0x300) are ignored on WM8505 as reserved
>> */
>> - writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
>> + if (fbi->interface = INTERFACE_VGA)
>> + writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB);
>> + else
>> + writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
>> +
>> writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
> Tony,
>
> Would it be possible to also define known bit offsets for those
> registers, while you are at this? It would probably reduce the black
> magic quite a bit :)
On my list of things to do :)
>> /* Virtual buffer size */
>> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
>>
>> /* black magic ;) */
>> writel(0xf, fbi->regbase + REG_GOVRH_FHI);
>> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
>> +
>> + if (fbi->interface = INTERFACE_VGA)
>> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
>> + else
>> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
> I don't remember if HDMI is yet another option for this register or
> not... If it is, it would probably warrant defining fbi->interface as
> an enum and changing this if-else into a switch statement to let the
> compiler add its checks/warnings.
This register defines the h/v syncpolarity and enable/disable for DVO.
>
>> writel(1, fbi->regbase + REG_GOVRH_MIF);
>> writel(1, fbi->regbase + REG_GOVRH_REG_STS);
>>
>> @@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info)
>> writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
>> writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
>> writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
>> + if (fbi->interface = INTERFACE_VGA)
>> + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
> Will it misbehave on LCD if you write to the VGA register unconditionally?
Don't know - wouldn't imagine so. I will test it and see.
>
>> writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
>> writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
>> writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
>> writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
>> + if (fbi->interface = INTERFACE_VGA)
>> + writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW);
> Same here. I would assume that setting the pixclock should not hurt
> LCD, which would then simplify the code a little.
>
> Thanks,
> Alexey
Regards
Tony Prisk
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.
@ 2013-05-18 19:51 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-18 19:51 UTC (permalink / raw)
To: linux-arm-kernel
On 19/05/13 01:28, Alexey Charkov wrote:
> 2013/5/18 Tony Prisk <linux@prisktech.co.nz>:
>> The APC8750 does not support an LCD panel, but provides a VGA connector.
>> This patch adds support for the VGA interface, and defines an optional
>> devicetree property to specify the output interface. The default if not
>> specified is LCD for backward compatibility.
>>
>> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
>> ---
>> .../devicetree/bindings/video/wm,wm8505-fb.txt | 5 ++++
>> drivers/video/wm8505fb.c | 31 ++++++++++++++++++--
>> 2 files changed, 34 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
>> index 601416c..9f1d648 100644
>> --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
>> +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
>> @@ -7,6 +7,10 @@ Required properties:
>> - bits-per-pixel : bit depth of framebuffer (16 or 32)
>> - clocks : phandle to DVO clock
>>
>> +Optional properties:
>> +- output-interface : the interface the fb should output on. Valid values are
>> + "lcd" or "vga". If not specified, the default is "lcd".
>> +
>> Required subnodes:
>> - display-timings: see display-timing.txt for information
>>
>> @@ -17,6 +21,7 @@ Example:
>> reg = <0xd8051700 0x200>;
>> bits-per-pixel = <16>;
>> clocks = <&clkdvo>;
>> + output-interface = "vga";
>>
>> display-timings {
>> native-mode = <&timing0>;
>> diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
>> index f8bffc2..d1f7f33 100644
>> --- a/drivers/video/wm8505fb.c
>> +++ b/drivers/video/wm8505fb.c
>> @@ -130,12 +130,17 @@
>>
>> #define to_wm8505fb_info(__info) container_of(__info, \
>> struct wm8505fb_info, fb)
>> +
>> +#define INTERFACE_LCD 1
>> +#define INTERFACE_VGA 2
>> +
>> struct wm8505fb_info {
>> struct fb_info fb;
>> void __iomem *regbase;
>> unsigned int contrast;
>> struct device *dev;
>> struct clk *clk_dvo;
>> + int interface;
>> };
>>
>>
>> @@ -158,7 +163,11 @@ static int wm8505fb_init_hw(struct fb_info *info)
>> * 0x31C sets the correct color mode (RGB565) for WM8650
>> * Bit 8+9 (0x300) are ignored on WM8505 as reserved
>> */
>> - writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
>> + if (fbi->interface == INTERFACE_VGA)
>> + writel(0x338, fbi->regbase + REG_GOVRH_YUVRGB);
>> + else
>> + writel(0x31c, fbi->regbase + REG_GOVRH_YUVRGB);
>> +
>> writel(1, fbi->regbase + REG_GOVRH_DVO_PIX);
> Tony,
>
> Would it be possible to also define known bit offsets for those
> registers, while you are at this? It would probably reduce the black
> magic quite a bit :)
On my list of things to do :)
>> /* Virtual buffer size */
>> @@ -167,7 +176,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
>>
>> /* black magic ;) */
>> writel(0xf, fbi->regbase + REG_GOVRH_FHI);
>> - writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
>> +
>> + if (fbi->interface == INTERFACE_VGA)
>> + writel(0xe, fbi->regbase + REG_GOVRH_DVO_SET);
>> + else
>> + writel(4, fbi->regbase + REG_GOVRH_DVO_SET);
> I don't remember if HDMI is yet another option for this register or
> not... If it is, it would probably warrant defining fbi->interface as
> an enum and changing this if-else into a switch statement to let the
> compiler add its checks/warnings.
This register defines the h/v syncpolarity and enable/disable for DVO.
>
>> writel(1, fbi->regbase + REG_GOVRH_MIF);
>> writel(1, fbi->regbase + REG_GOVRH_REG_STS);
>>
>> @@ -194,11 +208,15 @@ static int wm8505fb_set_timing(struct fb_info *info)
>> writel(h_end, fbi->regbase + REG_GOVRH_ACTPX_END);
>> writel(h_all, fbi->regbase + REG_GOVRH_H_ALLPXL);
>> writel(h_sync, fbi->regbase + REG_GOVRH_HDMI_HSYNW);
>> + if (fbi->interface == INTERFACE_VGA)
>> + writel(h_sync, fbi->regbase + REG_GOVRH_VGA_HSYNW);
> Will it misbehave on LCD if you write to the VGA register unconditionally?
Don't know - wouldn't imagine so. I will test it and see.
>
>> writel(v_start, fbi->regbase + REG_GOVRH_ACTLN_BG);
>> writel(v_end, fbi->regbase + REG_GOVRH_ACTLN_END);
>> writel(v_all, fbi->regbase + REG_GOVRH_V_ALLLN);
>> writel(v_sync, fbi->regbase + REG_GOVRH_HDMI_VBISW);
>> + if (fbi->interface == INTERFACE_VGA)
>> + writel(info->var.pixclock, fbi->regbase + REG_GOVRH_VGA_VSYNW);
> Same here. I would assume that setting the pixclock should not hurt
> LCD, which would then simplify the code a little.
>
> Thanks,
> Alexey
Regards
Tony Prisk
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 0/4] FB updates for 3.11
2013-05-18 9:15 ` Tony Prisk
(?)
@ 2013-05-19 8:06 ` Tony Prisk
-1 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-19 8:06 UTC (permalink / raw)
To: Tony Prisk
Cc: Florian Tobias Schandinat, vt8500-wm8505-linux-kernel,
linux-arm-kernel, linux-kernel, tomi.valkeinen, linux-fbdev
On 18/05/13 21:15, Tony Prisk wrote:
> Patch #1 - Move register defines inside the driver and drop the header.
> Patch #2 - Convert the register defines to use the vendor preferred names.
> Patch #3 - Add a device clock to wm8505fb. Without it, only the uboot
> initialized resolution is supported.
> Patch #4 - Add support for the VGA output found on the APC8750 board.
>
> Tony Prisk (4):
> fb: vt8500: Move register defines inside driver
> fb: vt8500: Convert to use vendor register names
> fb: vt8500: Require a device clock for wm8505fb driver
> fb: vt8500: Add VGA output support to wm8505fb driver.
>
> .../devicetree/bindings/video/wm,wm8505-fb.txt | 9 +-
> drivers/video/wm8505fb.c | 195 ++++++++++++--
> drivers/video/wm8505fb_regs.h | 76 ------
> drivers/video/wmt_ge_rops.c | 280 +++++++++++++++-----
> 4 files changed, 394 insertions(+), 166 deletions(-)
> delete mode 100644 drivers/video/wm8505fb_regs.h
>
Florian/Tomi,
Please ignore these patches. This driver needs a bit more work, so I
will do a
more thorough series and resubmit.
Regards
Tony Prisk
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 0/4] FB updates for 3.11
@ 2013-05-19 8:06 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-19 8:06 UTC (permalink / raw)
To: linux-arm-kernel
On 18/05/13 21:15, Tony Prisk wrote:
> Patch #1 - Move register defines inside the driver and drop the header.
> Patch #2 - Convert the register defines to use the vendor preferred names.
> Patch #3 - Add a device clock to wm8505fb. Without it, only the uboot
> initialized resolution is supported.
> Patch #4 - Add support for the VGA output found on the APC8750 board.
>
> Tony Prisk (4):
> fb: vt8500: Move register defines inside driver
> fb: vt8500: Convert to use vendor register names
> fb: vt8500: Require a device clock for wm8505fb driver
> fb: vt8500: Add VGA output support to wm8505fb driver.
>
> .../devicetree/bindings/video/wm,wm8505-fb.txt | 9 +-
> drivers/video/wm8505fb.c | 195 ++++++++++++--
> drivers/video/wm8505fb_regs.h | 76 ------
> drivers/video/wmt_ge_rops.c | 280 +++++++++++++++-----
> 4 files changed, 394 insertions(+), 166 deletions(-)
> delete mode 100644 drivers/video/wm8505fb_regs.h
>
Florian/Tomi,
Please ignore these patches. This driver needs a bit more work, so I
will do a
more thorough series and resubmit.
Regards
Tony Prisk
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 0/4] FB updates for 3.11
@ 2013-05-19 8:06 ` Tony Prisk
0 siblings, 0 replies; 27+ messages in thread
From: Tony Prisk @ 2013-05-19 8:06 UTC (permalink / raw)
To: linux-arm-kernel
On 18/05/13 21:15, Tony Prisk wrote:
> Patch #1 - Move register defines inside the driver and drop the header.
> Patch #2 - Convert the register defines to use the vendor preferred names.
> Patch #3 - Add a device clock to wm8505fb. Without it, only the uboot
> initialized resolution is supported.
> Patch #4 - Add support for the VGA output found on the APC8750 board.
>
> Tony Prisk (4):
> fb: vt8500: Move register defines inside driver
> fb: vt8500: Convert to use vendor register names
> fb: vt8500: Require a device clock for wm8505fb driver
> fb: vt8500: Add VGA output support to wm8505fb driver.
>
> .../devicetree/bindings/video/wm,wm8505-fb.txt | 9 +-
> drivers/video/wm8505fb.c | 195 ++++++++++++--
> drivers/video/wm8505fb_regs.h | 76 ------
> drivers/video/wmt_ge_rops.c | 280 +++++++++++++++-----
> 4 files changed, 394 insertions(+), 166 deletions(-)
> delete mode 100644 drivers/video/wm8505fb_regs.h
>
Florian/Tomi,
Please ignore these patches. This driver needs a bit more work, so I
will do a
more thorough series and resubmit.
Regards
Tony Prisk
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2013-05-19 8:06 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-18 9:15 [PATCH 0/4] FB updates for 3.11 Tony Prisk
2013-05-18 9:15 ` Tony Prisk
2013-05-18 9:15 ` Tony Prisk
2013-05-18 9:15 ` [PATCH 1/4] fb: vt8500: Move register defines inside driver Tony Prisk
2013-05-18 9:15 ` Tony Prisk
2013-05-18 9:15 ` Tony Prisk
2013-05-18 9:15 ` [PATCH 2/4] fb: vt8500: Convert to use vendor register names Tony Prisk
2013-05-18 9:15 ` Tony Prisk
2013-05-18 9:15 ` Tony Prisk
2013-05-18 9:15 ` [PATCH 3/4] fb: vt8500: Require a device clock for wm8505fb driver Tony Prisk
2013-05-18 9:15 ` Tony Prisk
2013-05-18 9:15 ` Tony Prisk
2013-05-18 9:15 ` [PATCH 4/4] fb: vt8500: Add VGA output support to " Tony Prisk
2013-05-18 9:15 ` Tony Prisk
2013-05-18 9:15 ` Tony Prisk
2013-05-18 13:28 ` Alexey Charkov
2013-05-18 13:28 ` Alexey Charkov
2013-05-18 13:28 ` Alexey Charkov
2013-05-18 13:41 ` Andy Chernyak
2013-05-18 13:41 ` Andy Chernyak
2013-05-18 13:41 ` Andy Chernyak
2013-05-18 19:51 ` Tony Prisk
2013-05-18 19:51 ` Tony Prisk
2013-05-18 19:51 ` Tony Prisk
2013-05-19 8:06 ` [PATCH 0/4] FB updates for 3.11 Tony Prisk
2013-05-19 8:06 ` Tony Prisk
2013-05-19 8:06 ` Tony Prisk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.