From: Thimo E <abc@digithi.de>
To: "Zhang, Yang Z" <yang.z.zhang@intel.com>
Cc: Keir Fraser <keir@xen.org>, Jan Beulich <JBeulich@suse.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
"Dong, Eddie" <eddie.dong@intel.com>,
Xen-develList <xen-devel@lists.xen.org>,
"Nakajima, Jun" <jun.nakajima@intel.com>,
"Zhang, Xiantao" <xiantao.zhang@intel.com>
Subject: Re: cpuidle and un-eoid interrupts at the local apic
Date: Mon, 12 Aug 2013 13:52:42 +0200 [thread overview]
Message-ID: <5208CC8A.7070703@digithi.de> (raw)
In-Reply-To: <A9667DDFB95DB7438FA9D7D576C3D87E0A8E11A4@SHSMSX104.ccr.corp.intel.com>
[-- Attachment #1.1: Type: text/plain, Size: 2618 bytes --]
Hello Yang,
attached you'll find the kernel dmesg, xen dmesg, lspci and output of
/proc/interrupts. If you want to see further logfiles, please let me know.
The processor is a Core i5-4670. The board is an Intel DH87MC
Mainboard. I am really not sure if it supports APICv, but VT-d is
supported enabled enabled.
> 4.The status of IRQ 29 is 10 which means the guest already issues the
> EOI because the bit IRQ_GUEST_EOI_PENDING is cleared, so there should
> be no pending EOI in the EOI stack. If possible, can you add some
> debug message in the guest EOI code path(like _irq_guest_eoi())) to
> track the EOI?
>
I don't see the IRQ29 in /proc/interrupts, what I see is:
cat xen-dmesg.txt |grep "29": (XEN) allocated vector 29 for irq 20
cat dmesg.txt | grep "eth0": [ 23.152355] e1000e 0000:00:19.0: PCI INT
A -> GSI 20 (level, low) -> IRQ 20
[ 23.330408] e1000e
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
So is the ethernet irq the bad one ? That is an Onboard Intel network
adapter.
> 6.I guess the interrupt remapping is enabled in your machine. Can you
> try to disable IR to see whether it still reproduceable?
>
Just to be sure, your proposal is to try the parameter "no-intremap" ?
Best regards
Thimo
Am 12.08.2013 10:49, schrieb Zhang, Yang Z:
>
> Hi Thimo,
>
> From your previous experience and log, it shows:
>
> 1.The interrupt that triggers the issue is a MSI.
>
> 2.MSI are treated as edge-triggered interrupts nomally, except when
> there is no way to mask the device. In this case, your previous log
> indicates the device is unmaskable(What special device are you
> using?Modern PCI devcie should be maskable).
>
> 3.The IRQ 29 is belong to dom0, it seems it is not a HVM related issue.
>
> 4.The status of IRQ 29 is 10 which means the guest already issues the
> EOI because the bit IRQ_GUEST_EOI_PENDING is cleared, so there should
> be no pending EOI in the EOI stack. If possible, can you add some
> debug message in the guest EOI code path(like _irq_guest_eoi())) to
> track the EOI?
>
> 5.Both of the log show when the issue occured, most of the other
> interrupts which owned by dom0 were in IRQ_MOVE_PENDING status. Is it
> a coincidence? Or it happened only on the special condition like heavy
> of IRQ migration?Perhaps you can disable irq balance in dom0 and pin
> the IRQ manually.
>
|6.I guess the interrupt remapping is enabled in your machine. Can you
try to disable IR to see whether it still reproduceable?
>
> Also, please provide the whole Xen log.
>
> Best regards,
>
> Yang
>
[-- Attachment #1.2: Type: text/html, Size: 15679 bytes --]
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 37951 bytes --]
[root@localhost ~]# dmesg
[ 0.000000] Reserving virtual address space above 0xfdc00000
[ 0.000000] Linux version 2.6.32.43-0.4.1.xs1.8.0.835.170778xen (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Wed May 29 18:06:30 EDT 2013
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 3.886977] Xen-provided machine memory map:
[ 3.886979] BIOS: 0000000000000000 - 000000000009d800 (usable)
[ 3.886981] BIOS: 000000000009d800 - 00000000000a0000 (reserved)
[ 3.886982] BIOS: 00000000000e0000 - 0000000000100000 (reserved)
[ 3.886984] BIOS: 0000000000100000 - 00000000b857f000 (usable)
[ 3.886985] BIOS: 00000000b857f000 - 00000000b8586000 (ACPI NVS)
[ 3.886986] BIOS: 00000000b8586000 - 00000000cb8dc000 (usable)
[ 3.886987] BIOS: 00000000cb8dc000 - 00000000cbae4000 (reserved)
[ 3.886989] BIOS: 00000000cbae4000 - 00000000cbaf9000 (ACPI data)
[ 3.886990] BIOS: 00000000cbaf9000 - 00000000cbc66000 (ACPI NVS)
[ 3.886991] BIOS: 00000000cbc66000 - 00000000cbfff000 (reserved)
[ 3.886992] BIOS: 00000000cbfff000 - 00000000cc000000 (usable)
[ 3.886994] BIOS: 00000000d7000000 - 00000000df200000 (reserved)
[ 3.886995] BIOS: 00000000f8000000 - 00000000fc000000 (reserved)
[ 3.886996] BIOS: 00000000fec00000 - 00000000fec01000 (reserved)
[ 3.886997] BIOS: 00000000fed00000 - 00000000fed04000 (reserved)
[ 3.886998] BIOS: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 3.887000] BIOS: 00000000fee00000 - 00000000fee01000 (reserved)
[ 3.887001] BIOS: 00000000ff000000 - 0000000100000000 (reserved)
[ 3.887002] BIOS: 0000000100000000 - 000000081fe00000 (usable)
[ 3.887003] Xen-provided physical RAM map:
[ 3.887004] Xen: 0000000000000000 - 000000002f800000 (usable)
[ 3.887021] DMI 2.7 present.
[ 3.887331] last_pfn = 0x2f800 max_arch_pfn = 0x10000000
[ 3.887332] initial memory mapped : 0 - 00000000
[ 3.887334] init_memory_mapping: 0000000000000000-000000002f800000
[ 3.887337] NX (Execute Disable) protection: active
[ 3.887339] 0000000000 - 002f800000 page 4k
[ 3.887565] kernel direct mapping tables up to 2f800000 @ 1040000-11c1000
[ 4.119725] RAMDISK: 00787000 - 00f70200
[ 4.121445] ACPI: RSDP 000f0490 00024 (v02 INTEL)
[ 4.121450] ACPI: XSDT cbae8078 00074 (v01 INTEL DH87MC 0000002F AMI 00010013)
[ 4.121455] ACPI: FACP cbaf3ef0 0010C (v05 INTEL DH87MC 0000002F AMI 00010013)
[ 4.121459] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
[ 4.121463] ACPI: DSDT cbae8180 0BD6E (v02 INTEL DH87MC 0000002F INTL 20091112)
[ 4.121466] ACPI: FACS cbc64080 00040
[ 4.121469] ACPI: APIC cbaf4000 00072 (v03 INTEL DH87MC 0000002F AMI 00010013)
[ 4.121472] ACPI: FPDT cbaf4078 00044 (v01 INTEL DH87MC 0000002F AMI 00010013)
[ 4.121475] ACPI: SSDT cbaf40c0 00539 (v01 INTEL DH87MC 0000002F INTL 20051117)
[ 4.121477] ACPI: SSDT cbaf4600 00AD8 (v01 INTEL DH87MC 0000002F INTL 20051117)
[ 4.121480] ACPI: MCFG cbaf50d8 0003C (v01 INTEL DH87MC 0000002F MSFT 00000097)
[ 4.121483] ACPI: HPET cbaf5118 00038 (v01 INTEL DH87MC 0000002F AMI. 00000005)
[ 4.121486] ACPI: SSDT cbaf5150 0036D (v01 INTEL DH87MC 0000002F INTL 20091112)
[ 4.121489] ACPI: SSDT cbaf54c0 02EDB (v01 INTEL DH87MC 0000002F INTL 20091112)
[ 4.121492] ACPI: XMAR cbaf83a0 000B8 (v01 INTEL DH87MC 0000002F INTL 00000001)
[ 4.121505] 0MB HIGHMEM available.
[ 4.121506] 760MB LOWMEM available.
[ 4.121507] mapped low ram: 0 - 2f800000
[ 4.121508] low ram: 0 - 2f800000
[ 4.121511] node 0 low ram: 00000000 - 2f000000
[ 4.121512] node 0 bootmap 00000000 - 00005e00
[ 4.122600] (5 early reservations) ==> bootmem [0000000000 - 002f000000]
[ 4.122601] #0 [0000100000 - 0000766414] TEXT DATA BSS ==> [0000100000 - 0000766414]
[ 4.122613] #1 [0000787000 - 0001040000] Xen provided ==> [0000787000 - 0001040000]
[ 4.122627] #2 [0000767000 - 00007671c5] BRK ==> [0000767000 - 00007671c5]
[ 4.122628] #3 [0001040000 - 00011b4000] PGTABLE ==> [0001040000 - 00011b4000]
[ 4.122632] #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000]
[ 4.122640] found SMP MP-table at [fdbf8740] 000fd740
[ 4.126292] Zone PFN ranges:
[ 4.126293] DMA 0x00000000 -> 0x00001000
[ 4.126294] Normal 0x00001000 -> 0x0002f800
[ 4.126295] HighMem 0x0002f800 -> 0x0002f800
[ 4.126296] Movable zone start PFN for each node
[ 4.126297] early_node_map[2] active PFN ranges
[ 4.126298] 0: 0x00000000 -> 0x0002f000
[ 4.126298] 0: 0x0002f800 -> 0x0002f800
[ 4.126300] On node 0 totalpages: 192512
[ 4.126565] free_area_init_node: node 0, pgdat c05cee80, node_mem_map c11b6000
[ 4.126567] DMA zone: 32 pages used for memmap
[ 4.126568] DMA zone: 0 pages reserved
[ 4.126569] DMA zone: 4064 pages, LIFO batch:0
[ 4.126617] Normal zone: 1488 pages used for memmap
[ 4.126619] Normal zone: 186928 pages, LIFO batch:31
[ 4.128804] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 4.128805] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 4.128806] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 4.128807] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 4.128810] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 4.128813] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 4.128818] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 4.128821] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 4.128822] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 4.128824] ACPI: IRQ0 used by override.
[ 4.128825] ACPI: IRQ2 used by override.
[ 4.128826] ACPI: IRQ9 used by override.
[ 4.128830] Using ACPI (MADT) for SMP configuration information
[ 4.128845] Allocating PCI resources starting at df200000 (gap: df200000:18e00000)
[ 4.128847] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 4.128866] PERCPU: Embedded 10 pages/cpu @c1868000 s18456 r0 d22504 u65536
[ 4.128869] pcpu-alloc: s18456 r0 d22504 u65536 alloc=16*4096
[ 4.128870] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 4.128881] Swapping MFNs for PFN 639 and 186a (MFN b9639 and 808795)
[ 4.128894] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992
[ 4.128896] Kernel command line: root=LABEL=root-logtaqlb ro console=tty0 xencons=hvc console=hvc0
[ 4.128913] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 4.128937] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 4.129036] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 4.129217] Enabling fast FPU save and restore... done.
[ 4.129220] Enabling unmasked SIMD FPU exception support... done.
[ 4.129223] Initializing CPU#0
[ 4.150637] Software IO TLB enabled:
[ 4.150638] Aperture: 64 megabytes
[ 4.150638] Address size: 28 bits
[ 4.150638] Kernel range: c1962000 - c5962000
[ 4.150639] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.150641] PCI-DMA: mask is set to 37 bits
[ 4.153027] Initializing HighMem for node 0 (00000000:00000000)
[ 4.153029] Memory: 679608k/778240k available (2935k kernel code, 90012k reserved, 2030k data, 392k init, 0k highmem)
[ 4.153032] virtual kernel memory layout:
[ 4.153033] fixmap : 0xfd877000 - 0xfdbff000 (3616 kB)
[ 4.153033] pkmap : 0xfd400000 - 0xfd600000 (2048 kB)
[ 4.153034] vmalloc : 0xf0000000 - 0xfd3fe000 ( 211 MB)
[ 4.153034] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 4.153035] .init : 0xc05da000 - 0xc063c000 ( 392 kB)
[ 4.153035] .data : 0xc03ddc79 - 0xc05d95fc (2030 kB)
[ 4.153036] .text : 0xc0100000 - 0xc03ddc79 (2935 kB)
[ 4.153037] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 4.153083] Hierarchical RCU implementation.
[ 4.153086] NR_IRQS:5376
[ 4.153564] Extended CMOS year: 2000
[ 4.153566] Xen reported: 3392.246 MHz processor.
[ 4.155016] Console: colour VGA+ 80x25
[ 4.163658] console [tty0] enabled
[ 4.173441] console [hvc0] enabled
[ 4.298919] Calibrating delay using timer specific routine.. 6819.24 BogoMIPS (lpj=34096222)
[ 4.299060] pid_max: default: 32768 minimum: 301
[ 4.299155] Mount-cache hash table entries: 512
[ 4.299292] mce: CPU supports 9 MCE banks
[ 4.299383] Checking 'hlt' instruction... OK.
[ 4.299798] SMP alternatives: switching to UP code
[ 4.314046] ACPI: Core revision 20090903
[ 4.328131] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 4.328205] ftrace: allocating 13078 entries in 26 pages
[ 4.331244] SMP alternatives: switching to SMP code
[ 4.345359] Initializing CPU#1
[ 4.345402] Initializing CPU#2
[ 4.345438] Brought up 4 CPUs
[ 4.345441] Initializing CPU#3
[ 4.427837] Grant table version 2
[ 4.427949] NET: Registered protocol family 16
[ 4.428286] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 4.428376] ACPI: bus type pci registered
[ 4.428469] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 4.428545] PCI: MCFG area at f8000000 reserved in E820
[ 4.428615] PCI: Using MMCONFIG for extended config space
[ 4.428687] PCI: Using configuration type 1 for base access
[ 4.430194] bio: create slab <bio-0> at 0
[ 4.431141] ACPI: EC: Look up EC in DSDT
[ 4.433028] ACPI: Executed 1 blocks of module-level executable AML code
[ 4.434934] ACPI: BIOS _OSI(Linux) query ignored
[ 4.436410] ACPI: Interpreter enabled
[ 4.436479] ACPI: (supports S0 S5)
[ 4.436652] ACPI: Using IOAPIC for interrupt routing
[ 4.443922] ACPI: Power Resource [FN00] (off)
[ 4.444001] ACPI: Power Resource [FN01] (off)
[ 4.444079] ACPI: Power Resource [FN02] (off)
[ 4.444156] ACPI: Power Resource [FN03] (off)
[ 4.444233] ACPI: Power Resource [FN04] (off)
[ 4.444700] ACPI: No dock devices found.
[ 4.444773] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 4.445207] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 4.445955] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 4.446030] pci 0000:00:01.0: PME# disabled
[ 4.446156] pci 0000:00:02.0: reg 10 64bit mmio: [0xf7800000-0xf7bfffff]
[ 4.446166] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
[ 4.446171] pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
[ 4.446283] pci 0000:00:14.0: reg 10 64bit mmio: [0xf7e20000-0xf7e2ffff]
[ 4.446338] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 4.446416] pci 0000:00:14.0: PME# disabled
[ 4.446584] pci 0000:00:16.0: reg 10 64bit mmio: [0xf7e3b000-0xf7e3b00f]
[ 4.446643] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 4.446718] pci 0000:00:16.0: PME# disabled
[ 4.446857] pci 0000:00:19.0: reg 10 32bit mmio: [0xf7e00000-0xf7e1ffff]
[ 4.446864] pci 0000:00:19.0: reg 14 32bit mmio: [0xf7e39000-0xf7e39fff]
[ 4.446871] pci 0000:00:19.0: reg 18 io port: [0xf080-0xf09f]
[ 4.446927] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 4.447002] pci 0000:00:19.0: PME# disabled
[ 4.447136] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf7e38000-0xf7e383ff]
[ 4.447212] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 4.447289] pci 0000:00:1a.0: PME# disabled
[ 4.447413] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7e30000-0xf7e33fff]
[ 4.447473] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 4.447548] pci 0000:00:1b.0: PME# disabled
[ 4.447709] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 4.447784] pci 0000:00:1c.0: PME# disabled
[ 4.447944] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 4.448019] pci 0000:00:1c.2: PME# disabled
[ 4.448164] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf7e37000-0xf7e373ff]
[ 4.448239] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 4.448315] pci 0000:00:1d.0: PME# disabled
[ 4.448562] pci 0000:00:1f.2: reg 10 io port: [0xf0d0-0xf0d7]
[ 4.448569] pci 0000:00:1f.2: reg 14 io port: [0xf0c0-0xf0c3]
[ 4.448575] pci 0000:00:1f.2: reg 18 io port: [0xf0b0-0xf0b7]
[ 4.448582] pci 0000:00:1f.2: reg 1c io port: [0xf0a0-0xf0a3]
[ 4.448588] pci 0000:00:1f.2: reg 20 io port: [0xf060-0xf07f]
[ 4.448595] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7e36000-0xf7e367ff]
[ 4.448674] pci 0000:00:1f.2: PME# supported from D3hot
[ 4.448748] pci 0000:00:1f.2: PME# disabled
[ 4.448851] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7e35000-0xf7e350ff]
[ 4.448870] pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
[ 4.448937] pci 0000:01:00.0: reg 10 32bit mmio: [0xf7d10000-0xf7d11fff]
[ 4.448973] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7d00000-0xf7d0ffff]
[ 4.449004] pci 0000:01:00.0: supports D1
[ 4.449047] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 4.449122] pci 0000:00:01.0: bridge 32bit mmio: [0xf7d00000-0xf7dfffff]
[ 4.449284] pci 0000:02:00.0: supports D1 D2
[ 4.449285] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 4.449363] pci 0000:02:00.0: PME# disabled
[ 4.449490] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 4.449564] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
[ 4.449627] pci 0000:03:02.0: reg 10 io port: [0xe050-0xe057]
[ 4.449639] pci 0000:03:02.0: reg 14 io port: [0xe040-0xe047]
[ 4.449652] pci 0000:03:02.0: reg 18 io port: [0xe030-0xe037]
[ 4.449664] pci 0000:03:02.0: reg 1c io port: [0xe020-0xe027]
[ 4.449676] pci 0000:03:02.0: reg 20 io port: [0xe010-0xe017]
[ 4.449689] pci 0000:03:02.0: reg 24 io port: [0xe000-0xe00f]
[ 4.449807] pci 0000:02:00.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 4.449891] pci 0000:02:00.0: bridge io port: [0xe000-0xefff]
[ 4.449908] pci 0000:02:00.0: bridge window [0xe000-0xefff] (subtractive decode)
[ 4.449909] pci 0000:02:00.0: bridge window [0x0-0x0] (subtractive decode)
[ 4.449910] pci 0000:02:00.0: bridge window [0x0-0x0] (subtractive decode)
[ 4.449911] pci 0000:02:00.0: bridge window [0x0-0x0] (subtractive decode)
[ 4.450003] pci 0000:04:00.0: reg 10 32bit mmio: [0xf7cc0000-0xf7cdffff]
[ 4.450016] pci 0000:04:00.0: reg 14 32bit mmio: [0xf7c00000-0xf7c7ffff]
[ 4.450028] pci 0000:04:00.0: reg 18 io port: [0xd000-0xd01f]
[ 4.450041] pci 0000:04:00.0: reg 1c 32bit mmio: [0xf7ce0000-0xf7ce3fff]
[ 4.450076] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xf7c80000-0xf7cbffff]
[ 4.450141] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 4.450219] pci 0000:04:00.0: PME# disabled
[ 4.450367] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 4.450440] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 4.450444] pci 0000:00:1c.2: bridge 32bit mmio: [0xf7c00000-0xf7cfffff]
[ 4.450468] pci_bus 0000:00: on NUMA node 0
[ 4.450470] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 4.450528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 4.450551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 4.450570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 4.450597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 4.454249] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.454900] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 4.455702] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.456356] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.457005] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.457693] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 4.458462] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.459110] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.459854] xen_mem: Initialising balloon driver.
[ 4.460070] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 4.460163] vgaarb: loaded
[ 4.460327] PCI: Using ACPI for IRQ routing
[ 4.460566] Switching to clocksource xen
[ 4.461400] pnp: PnP ACPI init
[ 4.461475] ACPI: bus type pnp registered
[ 4.463957] pnp: PnP ACPI: found 15 devices
[ 4.464028] ACPI: ACPI bus type pnp unregistered
[ 4.464104] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 4.464182] system 00:06: ioport range 0x680-0x69f has been reserved
[ 4.464256] system 00:06: ioport range 0xffff-0xffff has been reserved
[ 4.464329] system 00:06: ioport range 0xffff-0xffff has been reserved
[ 4.464401] system 00:06: ioport range 0xffff-0xffff has been reserved
[ 4.464475] system 00:06: ioport range 0x1c00-0x1cfe has been reserved
[ 4.465082] system 00:06: ioport range 0x1d00-0x1dfe has been reserved
[ 4.465155] system 00:06: ioport range 0x1e00-0x1efe has been reserved
[ 4.465229] system 00:06: ioport range 0x1f00-0x1ffe has been reserved
[ 4.465303] system 00:06: ioport range 0x1800-0x18fe has been reserved
[ 4.465376] system 00:06: ioport range 0x164e-0x164f has been reserved
[ 4.465450] system 00:08: ioport range 0x1854-0x1857 has been reserved
[ 4.465526] system 00:09: ioport range 0xa00-0xa1f has been reserved
[ 4.465600] system 00:09: ioport range 0xa20-0xa3f has been reserved
[ 4.465676] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 4.465750] system 00:0e: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 4.465861] system 00:0e: iomem range 0xfed10000-0xfed17fff has been reserved
[ 4.465935] system 00:0e: iomem range 0xfed18000-0xfed18fff has been reserved
[ 4.466009] system 00:0e: iomem range 0xfed19000-0xfed19fff has been reserved
[ 4.466084] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved
[ 4.466158] system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 4.466231] system 00:0e: iomem range 0xfed90000-0xfed93fff has been reserved
[ 4.466306] system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 4.466380] system 00:0e: iomem range 0xff000000-0xffffffff has been reserved
[ 4.466454] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 4.466541] system 00:0e: iomem range 0xf7fef000-0xf7feffff has been reserved
[ 4.466616] system 00:0e: iomem range 0xf7ff0000-0xf7ff0fff has been reserved
[ 4.467142] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 4.467216] pci 0000:00:01.0: IO window: disabled
[ 4.467291] pci 0000:00:01.0: MEM window: 0xf7d00000-0xf7dfffff
[ 4.467365] pci 0000:00:01.0: PREFETCH window: disabled
[ 4.467440] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 4.467515] pci 0000:02:00.0: IO window: 0xe000-0xefff
[ 4.467595] pci 0000:02:00.0: MEM window: disabled
[ 4.467670] pci 0000:02:00.0: PREFETCH window: disabled
[ 4.467752] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 4.467825] pci 0000:00:1c.0: IO window: 0xe000-0xefff
[ 4.467902] pci 0000:00:1c.0: MEM window: disabled
[ 4.468011] pci 0000:00:1c.0: PREFETCH window: disabled
[ 4.468088] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 4.468162] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 4.468237] pci 0000:00:1c.2: MEM window: 0xf7c00000-0xf7cfffff
[ 4.468311] pci 0000:00:1c.2: PREFETCH window: disabled
[ 4.468413] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.468490] pci 0000:00:01.0: setting latency timer to 64
[ 4.468499] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.468575] pci 0000:00:1c.0: setting latency timer to 64
[ 4.468588] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.468667] pci 0000:02:00.0: setting latency timer to 64
[ 4.468693] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.468770] pci 0000:00:1c.2: setting latency timer to 64
[ 4.468773] pci_bus 0000:00: resource 4 io: [0x00-0xcf7]
[ 4.468774] pci_bus 0000:00: resource 5 io: [0xd00-0xffff]
[ 4.468776] pci_bus 0000:00: resource 6 mem: [0x0a0000-0x0bffff]
[ 4.468777] pci_bus 0000:00: resource 7 mem: [0x0d4000-0x0d7fff]
[ 4.468778] pci_bus 0000:00: resource 8 mem: [0x0d8000-0x0dbfff]
[ 4.468778] pci_bus 0000:00: resource 9 mem: [0x0dc000-0x0dffff]
[ 4.468779] pci_bus 0000:00: resource 10 mem: [0x0e0000-0x0e3fff]
[ 4.468780] pci_bus 0000:00: resource 11 mem: [0x0e4000-0x0e7fff]
[ 4.468782] pci_bus 0000:00: resource 12 mem: [0xdf200000-0xfeafffff]
[ 4.468783] pci_bus 0000:01: resource 1 mem: [0xf7d00000-0xf7dfffff]
[ 4.468784] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 4.468785] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 4.468786] pci_bus 0000:03: resource 4 io: [0xe000-0xefff]
[ 4.468787] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 4.468788] pci_bus 0000:04: resource 1 mem: [0xf7c00000-0xf7cfffff]
[ 4.468822] NET: Registered protocol family 2
[ 4.468915] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 4.469057] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 4.469268] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 4.469398] TCP: Hash tables configured (established 131072 bind 65536)
[ 4.469473] TCP reno registered
[ 4.469579] NET: Registered protocol family 1
[ 4.469676] pci 0000:00:02.0: Boot video device
[ 4.514610] Trying to unpack rootfs image as initramfs...
[ 4.517847] Freeing initrd memory: 8100k freed
[ 4.519616] MCE: bind virq for DOM0 logging
[ 4.523285] VFS: Disk quotas dquot_6.5.2
[ 4.523364] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.523496] msgmni has been set to 379
[ 4.523730] alg: No test for stdrng (krng)
[ 4.523840] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 4.523929] io scheduler noop registered
[ 4.523999] io scheduler anticipatory registered
[ 4.524070] io scheduler deadline registered
[ 4.524153] io scheduler cfq registered (default)
[ 4.524353] pcieport 0000:00:01.0: get owner: 7ff0
[ 4.524441] pcieport 0000:00:01.0: irq 1279 (279) for MSI/MSI-X
[ 4.524449] pcieport 0000:00:01.0: setting latency timer to 64
[ 4.524629] pcieport 0000:00:1c.0: get owner: 7ff0
[ 4.524720] pcieport 0000:00:1c.0: irq 1278 (278) for MSI/MSI-X
[ 4.524730] pcieport 0000:00:1c.0: setting latency timer to 64
[ 4.524882] pcieport 0000:00:1c.2: get owner: 7ff0
[ 4.524973] pcieport 0000:00:1c.2: irq 1277 (277) for MSI/MSI-X
[ 4.524982] pcieport 0000:00:1c.2: setting latency timer to 64
[ 4.544605] floppy0: Unable to grab DMA2 for the floppy driver
[ 7.564496] floppy0: no floppy controllers found
[ 7.565633] brd: module loaded
[ 7.574697] loop: module loaded
[ 7.574824] Xen virtual console successfully installed as hvc0
[ 7.574934] Event-channel device installed.
[ 7.575044] blktap_device_init: blktap device major 253
[ 7.575117] blktap_ring_init: blktap ring major: 253
[ 7.578818] netfront: Initialising virtual ethernet driver.
[ 7.579073] Uniform Multi-Platform E-IDE driver
[ 7.579562] PNP: No PS/2 controller found. Probing ports directly.
[ 7.824855] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.825038] mice: PS/2 mouse device common for all mice
[ 7.825278] NET: Registered protocol family 17
[ 7.825471] registered taskstats version 1
[ 7.826002] PCI IO multiplexer device installed.
[ 7.826082] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 7.826263] Freeing unused kernel memory: 392k freed
[ 8.146851] usbcore: registered new interface driver usbfs
[ 8.146969] usbcore: registered new interface driver hub
[ 8.147070] usbcore: registered new device driver usb
[ 8.148617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.148716] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.148802] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 8.148805] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 8.148884] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 8.149008] ehci_hcd 0000:00:1a.0: debug port 2
[ 8.152975] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 8.153172] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7e38000
[ 8.174490] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 8.174641] usb usb1: configuration #1 chosen from 1 choice
[ 8.174739] hub 1-0:1.0: USB hub found
[ 8.174816] hub 1-0:1.0: 2 ports detected
[ 8.174960] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.175046] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.175049] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 8.175124] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 8.175239] ehci_hcd 0000:00:1d.0: debug port 2
[ 8.179190] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 8.179361] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7e37000
[ 8.194473] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 8.194616] usb usb2: configuration #1 chosen from 1 choice
[ 8.194713] hub 2-0:1.0: USB hub found
[ 8.194789] hub 2-0:1.0: 2 ports detected
[ 8.196136] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.197428] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.231334] SCSI subsystem initialized
[ 8.234919] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.235024] arcmsr 0000:01:00.0: setting latency timer to 64
[ 8.254518] Areca RAID Controller0: Model ARC-1212, F/W V1.51 2012-07-04
[ 8.254688] scsi0 : Areca SAS Host Adapter RAID Controller( RAID6 capable)
[ 8.254688] v1.20.0X.15.130619
[ 8.254923] arcmsr 0000:01:00.0: get owner: 7ff0
[ 8.255021] arcmsr 0000:01:00.0: irq 1276 (276) for MSI/MSI-X
[ 8.255028] IRQ 1276/arcmsr: IRQF_DISABLED is not guaranteed on shared IRQs
[ 8.255278] arcmsr0: msi enabled
[ 8.274633] scsi 0:0:0:0: Direct-Access Areca ARC-1212-VOL#000 R001 PQ: 0 ANSI: 5
[ 8.274844] sd 0:0:0:0: [sda] 39061504 512-byte logical blocks: (19.9 GB/18.6 GiB)
[ 8.274973] scsi 0:0:0:1: Direct-Access Areca ARC-1212-VOL#001 R001 PQ: 0 ANSI: 5
[ 8.275121] sd 0:0:0:0: [sda] Write Protect is off
[ 8.275192] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 8.275259] sd 0:0:0:1: [sdb] 7773435904 512-byte logical blocks: (3.97 TB/3.61 TiB)
[ 8.275283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.275507] sda: detected capacity change from 0 to 19999490048
[ 8.275592] sda:
[ 8.275654] sd 0:0:0:1: [sdb] Write Protect is off
[ 8.275793] sd 0:0:0:1: [sdb] Mode Sense: cb 00 00 08
[ 8.275834] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.276006] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0
[ 8.276159] sdb: detected capacity change from 0 to 3979999182848
[ 8.276233] sdb: unknown partition table
[ 8.284771] sda1 sda2 sda3
[ 8.285266] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.285267] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 8.288664] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 8.494474] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 8.644803] usb 1-1: configuration #1 chosen from 1 choice
[ 8.645032] hub 1-1:1.0: USB hub found
[ 8.645141] hub 1-1:1.0: 6 ports detected
[ 8.764493] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 8.914915] usb 2-1: configuration #1 chosen from 1 choice
[ 8.915146] hub 2-1:1.0: USB hub found
[ 8.915258] hub 2-1:1.0: 8 ports detected
[ 8.994635] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[ 9.105825] usb 1-1.1: configuration #1 chosen from 1 choice
[ 9.182281] usb 1-1.2: new low speed USB device using ehci_hcd and address 4
[ 9.301559] usb 1-1.2: configuration #1 chosen from 1 choice
[ 19.543871] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 19.543953] EXT3-fs: write access will be enabled during recovery.
[ 20.703097] kjournald starting. Commit interval 15 seconds
[ 20.703103] EXT3-fs: recovery complete.
[ 20.717913] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.105239] input: PC Speaker as /class/input/input0
[ 23.152294] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-NAPI
[ 23.152295] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 23.152355] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 23.152362] e1000e 0000:00:19.0: setting latency timer to 64
[ 23.152435] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 23.152483] e1000e 0000:00:19.0: get owner: 7ff0
[ 23.152512] e1000e 0000:00:19.0: irq 1275 (275) for MSI/MSI-X
[ 23.161131] libata version 3.00 loaded.
[ 23.263318] rtc_cmos 00:07: RTC can wake from S4
[ 23.263381] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 23.263436] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 23.273904] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 23.274025] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.274212] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.276733] parport_pc 00:0c: reported by Plug and Play ACPI
[ 23.276795] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 23.330406] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 7c:05:07:0e:a0:b2
[ 23.330408] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 23.330444] e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 23.330474] e1000e 0000:04:00.0: Disabling ASPM L0s L1
[ 23.330477] ahci 0000:00:1f.2: version 3.0
[ 23.330535] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 23.330622] ahci 0000:00:1f.2: get owner: 7ff0
[ 23.330658] ahci 0000:00:1f.2: irq 1274 (274) for MSI/MSI-X
[ 23.330702] e1000e 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 23.330712] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x2 impl SATA mode
[ 23.330714] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 23.330724] ahci 0000:00:1f.2: setting latency timer to 64
[ 23.330748] e1000e 0000:04:00.0: setting latency timer to 64
[ 23.330887] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 23.331012] e1000e 0000:04:00.0: get owner: 7ff0
[ 23.331119] e1000e 0000:04:00.0: irq 1273 (273) for MSI/MSI-X
[ 23.331120] e1000e 0000:04:00.0: get owner: 7ff0
[ 23.331217] e1000e 0000:04:00.0: irq 1272 (272) for MSI/MSI-X
[ 23.331219] e1000e 0000:04:00.0: get owner: 7ff0
[ 23.331316] e1000e 0000:04:00.0: irq 1271 (271) for MSI/MSI-X
[ 23.356728] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.356991] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.357303] scsi1 : ahci
[ 23.360806] ACPI: SSDT cbad9c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 23.361621] ACPI: SSDT cbad9618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 23.361913] ACPI: SSDT cbad8d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 23.368734] scsi2 : ahci
[ 23.379227] thermal LNXTHERM:01: registered as thermal_zone0
[ 23.379233] ACPI: Thermal Zone [TZ00] (28 C)
[ 23.379371] thermal LNXTHERM:02: registered as thermal_zone1
[ 23.379376] ACPI: Thermal Zone [TZ01] (30 C)
[ 23.386146] scsi3 : ahci
[ 23.386812] input: Power Button as /class/input/input1
[ 23.386821] ACPI: Power Button [PWRB]
[ 23.386848] input: Power Button as /class/input/input2
[ 23.386849] ACPI: Power Button [PWRF]
[ 23.412559] scsi4 : ahci
[ 23.423034] scsi5 : ahci
[ 23.423214] ata1: DUMMY
[ 23.423216] ata2: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36180 irq 1274
[ 23.423218] ata3: DUMMY
[ 23.423218] ata4: DUMMY
[ 23.423219] ata5: DUMMY
[ 23.488122] e1000e 0000:04:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:09:f2:b0
[ 23.488124] e1000e 0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 23.488136] e1000e 0000:04:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-007
[ 23.701429] serial 0000:03:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 23.701750] 0000:03:02.0: ttyS2 at I/O 0xe040 (irq = 18) is a 16550A
[ 23.712716] ACPI: Fan [FAN0] (off)
[ 23.712739] ACPI: Fan [FAN1] (off)
[ 23.712760] ACPI: Fan [FAN2] (off)
[ 23.712782] ACPI: Fan [FAN3] (off)
[ 23.712804] ACPI: Fan [FAN4] (off)
[ 23.778912] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 23.780959] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 23.780962] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 23.780963] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 23.782563] ata2.00: ATAPI: Optiarc DVD RW AD-5260S, 1.00, max UDMA/100
[ 23.784987] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 23.784989] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 23.784991] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 23.786603] ata2.00: configured for UDMA/100
[ 23.810591] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-5260S 1.00 PQ: 0 ANSI: 5
[ 24.080565] acpi device:53: registered as cooling_device13
[ 24.080619] input: Video Bus as /class/input/input3
[ 24.080622] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 24.091733] Too many connections
[ 24.200236] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.200279] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 24.200321] scsi 0:0:16:0: Attached scsi generic sg2 type 3
[ 24.200354] scsi 2:0:0:0: Attached scsi generic sg3 type 5
[ 24.321204] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 24.321206] Uniform CD-ROM driver Revision: 3.20
[ 24.321291] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 24.600239] usbcore: registered new interface driver usbserial
[ 24.600245] USB Serial support registered for generic
[ 24.600260] usbcore: registered new interface driver usbserial_generic
[ 24.600261] usbserial: USB Serial Driver core
[ 24.624363] USB Serial support registered for FTDI USB Serial Device
[ 24.624385] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[ 24.624397] usb 1-1.1: Detected FT232BM
[ 24.624398] usb 1-1.1: Number of endpoints 2
[ 24.624398] usb 1-1.1: Endpoint 1 MaxPacketSize 64
[ 24.624399] usb 1-1.1: Endpoint 2 MaxPacketSize 64
[ 24.624400] usb 1-1.1: Setting MaxPacketSize 64
[ 24.626957] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 24.627027] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 24.627034] usbcore: registered new interface driver hiddev
[ 24.627043] usbcore: registered new interface driver ftdi_sio
[ 24.627044] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 24.629412] input: LITEON Technology USB Multimedia Keyboard as /class/input/input4
[ 24.629462] generic-usb 0003:046D:C313.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.0-1.2/input0
[ 24.632066] input: LITEON Technology USB Multimedia Keyboard as /class/input/input5
[ 24.632112] generic-usb 0003:046D:C313.0002: input: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.0-1.2/input1
[ 24.632122] usbcore: registered new interface driver usbhid
[ 24.632123] usbhid: v2.6:USB HID core driver
[ 26.780806] Non-volatile memory driver v1.3
[ 26.814258] lp0: using parport0 (interrupt-driven).
[ 27.181481] md: Autodetecting RAID arrays.
[ 27.181487] md: Scanned 0 and added 0 devices.
[ 27.181490] md: autorun ...
[ 27.181492] md: ... autorun DONE.
[ 27.592946] EXT3 FS on sda1, internal journal
[ 27.693968] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 27.721014] ISO 9660 Extensions: RRIP_1991A
[ 29.122667] Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:149 across:1024864k
[ 30.060497] Microcode Update Driver: v2.00-xen <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 30.118808] Microcode Update Driver: v2.00-xen removed.
[ 31.609507] openvswitch_mod: Open vSwitch switching datapath 1.4.6, built Jun 14 2013 09:23:22
[ 32.219454] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 33.242878] device xenbr1 entered promiscuous mode
[ 33.394197] device eth1 entered promiscuous mode
[ 34.541604] RPC: Registered udp transport module.
[ 34.541606] RPC: Registered tcp transport module.
[ 34.541607] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 36.475617] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 75.935592] warning: `ntpdate' uses 32-bit capabilities (legacy support in use)
[ 80.400227] suspend: event channel 42
[ 86.244189] device xenbr0 entered promiscuous mode
[ 86.354851] e1000e 0000:00:19.0: get owner: 7ff0
[ 86.354911] e1000e 0000:00:19.0: get owner: 7ff0
[ 86.354939] e1000e 0000:00:19.0: irq 1275 (275) for MSI/MSI-X
[ 86.465037] e1000e 0000:00:19.0: get owner: 7ff0
[ 86.465098] e1000e 0000:00:19.0: get owner: 7ff0
[ 86.465126] e1000e 0000:00:19.0: irq 1275 (275) for MSI/MSI-X
[ 86.469989] device eth0 entered promiscuous mode
[ 89.976206] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[-- Attachment #3: lspci.txt --]
[-- Type: text/plain, Size: 1577 bytes --]
00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)
00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4)
00:1c.2 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #3 (rev d4)
00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04)
01:00.0 RAID bus controller: Areca Technology Corp. ARC-1680 8 port PCIe/PCI-X to SAS/SATA II RAID Controller
02:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 41)
03:02.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9835 Multi-I/O Controller (rev 01)
04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
[-- Attachment #4: lspci-vv.txt --]
[-- Type: text/plain, Size: 29251 bytes --]
[root@localhost ~]# lspci -vv
00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
Subsystem: Intel Corporation Device 2049
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Intel Corporation Device 2049
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee002f8 Data: 0000
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed unknown, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <8us
ClockPM- Surprise- LLActRep- BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: Unknown, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Capabilities: [d94 v1] #19
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device 2049
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Intel Corporation Device 2049
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7e20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04)
Subsystem: Intel Corporation Device 2049
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7e3b000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)
Subsystem: Intel Corporation Device 2049
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 1275
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7e39000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00378 Data: 0000
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device 2049
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e38000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP+
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04)
Subsystem: Intel Corporation Device 2049
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f7e30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=2 ArbSelect=Fixed TC/VC=04
Status: NegoPending- InProgress-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation Device 2049
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #3 (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00338 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation Device 2049
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device 2049
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e37000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04)
Subsystem: Intel Corporation Device 2049
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device 2049
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 1274
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e36000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00398 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04)
Subsystem: Intel Corporation Device 2049
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f7e35000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
01:00.0 RAID bus controller: Areca Technology Corp. ARC-1680 8 port PCIe/PCI-X to SAS/SATA II RAID Controller
Subsystem: Areca Technology Corp. ARC-1212 4-Port PCIe to SAS/SATA II RAID Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1276
Region 0: Memory at f7d10000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at f7d00000 [disabled] [size=64K]
Capabilities: [98] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee00358 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s unlimited, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 256 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM unknown, Latency L0 <128ns, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: arcmsr
Kernel modules: arcmsr
02:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 41) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: [90] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] Subsystem: Intel Corporation Device 2049
03:02.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9835 Multi-I/O Controller (rev 01) (prog-if 02 [16550])
Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e050 [size=8]
Region 1: I/O ports at e040 [size=8]
Region 2: I/O ports at e030 [size=8]
Region 3: I/O ports at e020 [size=8]
Region 4: I/O ports at e010 [size=8]
Region 5: I/O ports at e000 [size=16]
Kernel driver in use: serial
Kernel modules: parport_serial, 8250_pci
04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
Subsystem: Intel Corporation Gigabit CT Desktop Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f7cc0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7c00000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at d000 [size=32]
Region 3: Memory at f7ce0000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f7c80000 [disabled] [size=256K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 68-05-ca-ff-ff-09-f2-b0
Kernel driver in use: e1000e
Kernel modules: e1000e
[-- Attachment #5: proc_interrupts.txt --]
[-- Type: text/plain, Size: 3556 bytes --]
CPU0 CPU1 CPU2 CPU3
1: 2 0 0 0 Phys-fasteoi i8042
3: 2 0 0 0 Phys-fasteoi
4: 2 0 0 0 Phys-fasteoi
5: 0 0 0 0 Phys-fasteoi parport0
8: 0 0 0 0 Phys-fasteoi rtc0
9: 0 0 0 0 Phys-fasteoi acpi
16: 21540272 2019848 10967 36641 Phys-fasteoi ehci_hcd:usb1
18: 1136455 0 0 0 Phys-fasteoi serial
23: 722 0 0 0 Phys-fasteoi ehci_hcd:usb2
1271: 2 0 0 0 Phys-fasteoi eth1
1272: 366278 1042267 53929 0 Phys-fasteoi eth1-tx-0
1273: 228149 2202205 61538 31428 Phys-fasteoi eth1-rx-0
1274: 478864 0 0 0 Phys-fasteoi ahci
1275: 534255 355514 0 2135 Phys-fasteoi eth0
1276: 1290076 614329 0 0 Phys-fasteoi arcmsr
1280: 8049519 6344980 6955891 6191609 Dynamic-percpu timer
1281: 1934700 2150070 13180166 5099824 Dynamic-percpu resched
1282: 172 649 646 629 Dynamic-percpu callfunc
1283: 179585 377636 463599 314766 Dynamic-percpu call1func
1284: 0 0 0 0 Dynamic-percpu reboot
1285: 58111 43898 42617 40707 Dynamic-percpu spinlock
1286: 0 0 0 0 Dynamic-fasteoi mce
1287: 0 0 0 0 Dynamic-fasteoi console
1288: 3380 888 0 0 Dynamic-fasteoi xenbus
1289: 0 0 0 0 Dynamic-fasteoi suspend
1290: 23725 31039 745 31 Dynamic-fasteoi blkif-backend
1291: 3348 4493 127 12 Dynamic-fasteoi blkif-backend
1292: 11833 19939 579 19 Dynamic-fasteoi vif1.0
1293: 616790 545740 66804 20724 Dynamic-fasteoi vif2.0
1294: 143273 134973 38705 13997 Dynamic-fasteoi vif2.1
1295: 375537 209553 17189 248 Dynamic-fasteoi vif2.2
1296: 102045 83304 7994 83 Dynamic-fasteoi blkif-backend
1297: 283886 314708 6045 183 Dynamic-fasteoi blkif-backend
1298: 419807 356574 29085 321 Dynamic-fasteoi vif5.0
1299: 371863 452805 121437 5079 Dynamic-fasteoi vif3.0
1300: 100407 94982 4729 230 Dynamic-fasteoi blkif-backend
1301: 27931 33386 20341 19 Dynamic-fasteoi vif4.0
1302: 209051 156930 6768 0 Dynamic-fasteoi blkif-backend
1303: 213914 156507 55802 0 Dynamic-fasteoi vif6.0
1304: 26383 32040 7129 0 Dynamic-fasteoi blkif-backend
NMI: 0 0 0 0 Non-maskable interrupts
RES: 1934700 2150071 13180167 5099825 Rescheduling interrupts
CAL: 179757 378285 464245 315395 Function call interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 1 1 1 1 Machine check polls
[-- Attachment #6: xen-dmesg.txt --]
[-- Type: text/plain, Size: 11725 bytes --]
[root@localhost log]# cat xen-dmesg
__ __ _ _ _ ____ _ _ ____
\ \/ /___ _ __ | || | / | | ___| __| | ___| |__ _ _ __ _| ___|
\ // _ \ '_ \ | || |_ | | |___ \ __ / _` |/ _ \ '_ \| | | |/ _` |___ \
/ \ __/ | | | |__ _|| |_ ___) |__| (_| | __/ |_) | |_| | (_| |___) |
/_/\_\___|_| |_| |_|(_)_(_)____/ \__,_|\___|_.__/ \__,_|\__, |____/
|___/
(XEN) Xen version 4.1.5-debug5 (andrewcoop@uk.xensource.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) Fri Aug 9 14:43:57 EDT 2013
(XEN) Latest ChangeSet: Fri Aug 09 19:33:04 2013 +0100 23792:19aca3f08703
(XEN) Bootloader: SYSLINUX 4.06 0x51a10931
(XEN) Command line: com1=115200,8n1,0xe050,0 console=com1,vga mem=1024G dom0_max_vcpus=4 dom0_mem=752M,max:752M watchdog_timeout=300 lowmem_emergency_pool=1M crashkernel=64M@32M cpuid_mask_xsave_eax=0
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009d800 (usable)
(XEN) 000000000009d800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000b857f000 (usable)
(XEN) 00000000b857f000 - 00000000b8586000 (ACPI NVS)
(XEN) 00000000b8586000 - 00000000cb8dc000 (usable)
(XEN) 00000000cb8dc000 - 00000000cbae4000 (reserved)
(XEN) 00000000cbae4000 - 00000000cbaf9000 (ACPI data)
(XEN) 00000000cbaf9000 - 00000000cbc66000 (ACPI NVS)
(XEN) 00000000cbc66000 - 00000000cbfff000 (reserved)
(XEN) 00000000cbfff000 - 00000000cc000000 (usable)
(XEN) 00000000d7000000 - 00000000df200000 (reserved)
(XEN) 00000000f8000000 - 00000000fc000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fed00000 - 00000000fed04000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000081fe00000 (usable)
(XEN) Kdump: 64MB (65536kB) at 0x2000000
(XEN) ACPI: RSDP 000F0490, 0024 (r2 INTEL)
(XEN) ACPI: XSDT CBAE8078, 0074 (r1 INTEL DH87MC 2F AMI 10013)
(XEN) ACPI: FACP CBAF3EF0, 010C (r5 INTEL DH87MC 2F AMI 10013)
(XEN) ACPI Warning (tbfadt-0232): FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 [20070126]
(XEN) ACPI: DSDT CBAE8180, BD6E (r2 INTEL DH87MC 2F INTL 20091112)
(XEN) ACPI: FACS CBC64080, 0040
(XEN) ACPI: APIC CBAF4000, 0072 (r3 INTEL DH87MC 2F AMI 10013)
(XEN) ACPI: FPDT CBAF4078, 0044 (r1 INTEL DH87MC 2F AMI 10013)
(XEN) ACPI: SSDT CBAF40C0, 0539 (r1 INTEL DH87MC 2F INTL 20051117)
(XEN) ACPI: SSDT CBAF4600, 0AD8 (r1 INTEL DH87MC 2F INTL 20051117)
(XEN) ACPI: MCFG CBAF50D8, 003C (r1 INTEL DH87MC 2F MSFT 97)
(XEN) ACPI: HPET CBAF5118, 0038 (r1 INTEL DH87MC 2F AMI. 5)
(XEN) ACPI: SSDT CBAF5150, 036D (r1 INTEL DH87MC 2F INTL 20091112)
(XEN) ACPI: SSDT CBAF54C0, 2EDB (r1 INTEL DH87MC 2F INTL 20091112)
(XEN) ACPI: DMAR CBAF83A0, 00B8 (r1 INTEL DH87MC 2F INTL 1)
(XEN) System RAM: 32438MB (33216972kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000081fe00000
(XEN) Domain heap initialised DMA width 32 bits
(XEN) found SMP MP-table at 000fd740
(XEN) DMI 2.7 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[1804,0], pm1x_evt[1800,0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - cbc64080/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[cbc6408c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:12 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:12 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
(XEN) PCI: MCFG area at f8000000 reserved in E820
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3392.247 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 64 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 4 CPUs
(XEN) Testing NMI watchdog --- CPU#0 okay. CPU#1 okay. CPU#2 okay. CPU#3 okay.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x100000 memsz=0x3fd000
(XEN) elf_parse_binary: phdr: paddr=0x4fd000 memsz=0x28a000
(XEN) elf_parse_binary: memory: 0x100000 -> 0x787000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xc0000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_parse_note: ENTRY = 0xc0100000
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xc0101000
(XEN) elf_xen_parse_note: HV_START_LOW = 0xf5800000
(XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xc0000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xc0000000
(XEN) virt_kstart = 0xc0100000
(XEN) virt_kend = 0xc0787000
(XEN) virt_entry = 0xc0100000
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x100000 -> 0x787000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 00000000b9000000->00000000ba000000 (186390 pages to be allocated)
(XEN) Init. ramdisk: 000000081f616000->000000081fdff200
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: 00000000c0100000->00000000c0787000
(XEN) Init. ramdisk: 00000000c0787000->00000000c0f70200
(XEN) Phys-Mach map: 00000000c0f71000->00000000c102d000
(XEN) Start info: 00000000c102d000->00000000c102d4b4
(XEN) Page tables: 00000000c102e000->00000000c103e000
(XEN) Boot stack: 00000000c103e000->00000000c103f000
(XEN) TOTAL: 00000000c0000000->00000000c1400000
(XEN) ENTRY ADDRESS: 00000000c0100000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) elf_load_binary: phdr 0 at 0x3222274048 -> 0x3226456064
(XEN) elf_load_binary: phdr 1 at 0x3226456064 -> 0x3227783168
(XEN) Scrubbing Free RAM: ........................................................................................................................................................................................................................................................................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 276kB init memory.
(XEN) __csched_vcpu_acct_start: setting dom 0 as the privileged domain
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:14.0
(XEN) PCI add device 00:16.0
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.2
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 01:00.0
(XEN) PCI add device 02:00.0
(XEN) PCI add device 03:02.0
(XEN) PCI add device 04:00.0
(XEN) allocated vector b0 for irq 16
(XEN) allocated vector b8 for irq 18
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.2
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1d.0
(XEN) allocated vector d8 for irq 23
(XEN) PCI add device 01:00.0
(XEN) PCI add device 00:19.0
(XEN) allocated vector 29 for irq 20
(XEN) PCI add device 04:00.0
(XEN) PCI add device 00:1f.2
(XEN) allocated vector 39 for irq 19
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=42120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=42120]
(XEN) Monitor-Mwait will be used to enter C-2 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=42120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=42120]
(XEN) Monitor-Mwait will be used to enter C-2 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=42120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=42120]
(XEN) Monitor-Mwait will be used to enter C-2 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=42120]
(XEN) Monitor-Mwait will be used to enter C-1 state
(XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=42120]
(XEN) Monitor-Mwait will be used to enter C-2 state
(XEN) no cpu_id for acpi_id 5
(XEN) no cpu_id for acpi_id 6
(XEN) no cpu_id for acpi_id 7
(XEN) no cpu_id for acpi_id 8
(XEN) PCI add device 03:02.0
(XEN) PCI add device 00:1b.0
(XEN) allocated vector 61 for irq 22
(XEN) paging.c:732:d0 Tried to do a paging op on itself.
(XEN) paging.c:732:d0 Tried to do a paging op on itself.
[-- Attachment #7: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2013-08-12 11:52 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-31 20:32 cpuidle and un-eoid interrupts at the local apic Andrew Cooper
2013-06-03 14:30 ` Jan Beulich
2013-07-31 8:30 ` Thimo E.
2013-07-31 9:47 ` Andrew Cooper
2013-08-02 22:50 ` Thimo E.
2013-08-02 23:32 ` Andrew Cooper
2013-08-05 12:45 ` Jan Beulich
2013-08-05 14:51 ` Andrew Cooper
2013-08-09 21:27 ` Thimo E.
2013-08-09 21:40 ` Andrew Cooper
2013-08-09 21:44 ` Andrew Cooper
2013-08-11 17:46 ` Thimo E.
2013-08-12 6:02 ` Zhang, Yang Z
2013-08-12 8:49 ` Zhang, Yang Z
2013-08-12 8:57 ` Jan Beulich
2013-08-12 11:52 ` Thimo E [this message]
2013-08-12 12:04 ` Andrew Cooper
2013-08-19 15:14 ` Thimo E.
2013-08-20 5:43 ` Thimo Eichstädt
2013-08-20 8:40 ` Jan Beulich
2013-08-20 8:50 ` Zhang, Yang Z
2013-08-23 7:22 ` Thimo Eichstädt
2013-08-23 7:30 ` Zhang, Yang Z
2013-08-27 1:03 ` Zhang, Yang Z
2013-09-04 18:32 ` Thimo E.
2013-09-04 18:55 ` Andrew Cooper
2013-09-04 19:56 ` Thimo E.
2013-09-04 20:54 ` Andrew Cooper
2013-09-05 1:45 ` Zhang, Yang Z
2013-09-05 7:20 ` Thimo E.
2013-09-05 1:15 ` Zhang, Yang Z
2013-09-17 2:09 ` Zhang, Yang Z
2013-09-17 7:39 ` Thimo E.
2013-09-17 7:43 ` Zhang, Yang Z
2013-09-17 21:04 ` Thimo E.
2013-09-18 1:18 ` Zhang, Xiantao
2013-09-18 17:24 ` Thimo E.
2013-09-18 12:06 ` Andrew Cooper
2013-08-12 13:54 ` Thimo E
2013-08-12 14:06 ` Andrew Cooper
2013-08-13 1:43 ` Zhang, Yang Z
2013-08-13 6:39 ` Thimo E.
2013-08-13 11:39 ` Wu, Feng
2013-08-13 12:46 ` Andrew Cooper
2013-08-12 9:10 ` Andrew Cooper
2013-08-12 5:50 ` Zhang, Yang Z
2013-08-12 8:20 ` Jan Beulich
2013-08-12 9:28 ` Andrew Cooper
2013-08-12 10:05 ` Jan Beulich
2013-08-12 10:27 ` Andrew Cooper
2013-08-14 2:53 ` Zhang, Yang Z
2013-08-14 7:51 ` Thimo E.
2013-08-14 9:52 ` Andrew Cooper
2013-09-07 13:27 ` Thimo E.
2013-09-07 17:02 ` Andrew Cooper
2013-09-07 23:37 ` Thimo E.
2013-09-08 9:53 ` Andrew Cooper
2013-09-08 10:24 ` Thimo E.
2013-09-09 13:16 ` Andrew Cooper
2013-09-09 14:48 ` Thimo Eichstädt
2013-09-09 15:12 ` Andrew Cooper
2013-09-09 7:59 ` Jan Beulich
2013-09-09 12:53 ` Andrew Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5208CC8A.7070703@digithi.de \
--to=abc@digithi.de \
--cc=JBeulich@suse.com \
--cc=andrew.cooper3@citrix.com \
--cc=eddie.dong@intel.com \
--cc=jun.nakajima@intel.com \
--cc=keir@xen.org \
--cc=xen-devel@lists.xen.org \
--cc=xiantao.zhang@intel.com \
--cc=yang.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.