Re: Domain 0 crashed when booting OMAP5 uEVM

[Julien Grall <julien.grall@linaro.org>]

On 08/12/2013 01:24 PM, Chen Baozi wrote:
> Hi Ian & Julien,
> 
> I've added SMP "cpu kicking" & "mode switching" codes for OMAP5 today and
> trying to boot Xen on my board again. And it looks that I still got some
> work to do to boot my board.
> 
> I attach the log in the end of mail. Any ideas for what I should have
> missed?
> 
> Cheers,
> 
> Baozi
> 
> ---
> Starting kernel ...
> 
> - UART enabled -
> - CPU 00000000 booting -
> - Machine ID 00000ec1 -
> - Started in Hyp mode -
> - Zero BSS -
> - Setting up control registers -
> - Turning on paging -
> - Ready -
> fdt: node `cpu@0': invalid #address-cells or #size-cellsfdt: node `cpu@1':
> - invalid #addref

Hum ... this is why Xen can't find the other cpus. Could you paste the
content of the node cpus here?

> MODULE[1]: 00000000a0000000 - 00000000a0400000 
> Placing Xen at 0x00000000fee00000-0x00000000ff000000
> Xen heap: 262144 pages  Dom heap: 258048 pages
> Looking for UART console serial2
>  __  __            _  _   _  _                      _        _     _      
>  \ \/ /___ _ __   | || | | || |     _   _ _ __  ___| |_ __ _| |__ | | ___ 
>   \  // _ \ '_ \  | || |_| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
>   /  \  __/ | | | |__   _|__   _|__| |_| | | | \__ \ || (_| | |_) | |  __/
>  /_/\_\___|_| |_|    |_|(_) |_|     \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
>                                                                           
> (XEN) Xen version 4.4-unstable (cbz@) (arm-linux-gnueabihf-gcc (crosstool-NG
> linaro-1.13.3
> (XEN) Latest ChangeSet: Wed Aug 7 11:38:25 2013 +0800 git:47f28d7-dirty
> (XEN) Processor: "ARM Limited", variant: 0x2, part 0xc0f, rev 0x2
> (XEN) 32-bit Execution:
> (XEN)   Processor Features: 00001131:00011011
> (XEN)     Instruction Sets: AArch32 Thumb Thumb-2 ThumbEE Jazelle
> (XEN)     Extensions: GenericTimer Security
> (XEN)   Debug Features: 02010555
> (XEN)   Auxiliary Features: 00000000
> (XEN)   Memory Model Features: 10201105 20000000 01240000 02102211
> (XEN)  ISA Features: 02101110 13112111 21232041 11112131 10011142 00000000
> (XEN) Platform: TI OMAP5
> (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27
> (XEN) Using generic timer at 6144 KHz
> (XEN) GIC initialization:
> (XEN)         gic_dist_addr=0000000048211000
> (XEN)         gic_cpu_addr=0000000048212000
> (XEN)         gic_hyp_addr=0000000048214000
> (XEN)         gic_vcpu_addr=0000000048216000
> (XEN)         gic_maintenance_irq=25
> (XEN) GIC: 192 lines, 2 cpus, secure (IID 0000043b).
> (XEN) Waiting for 0 other CPUs to be ready
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Allocated console ring of 16 KiB.
> (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0
> (XEN) Brought up 1 CPUs
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Populate P2M 0x80000000->0x90000000
> (XEN) Loading kernel from boot module 1
> (XEN) Loading zImage from 00000000a0000000 to
> 0000000080008000-00000000803f6d70
> (XEN) Loading dom0 DTB to 0x000000008fe00000-0x000000008fe04e46
> (XEN) Std. Loglevel: All
> (XEN) Guest Loglevel: All
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
> Xen)
> (XEN) Freed 220kB init memory.
> (XEN) Guest data abort: Translation fault at level 3
> (XEN)     gva=fce06704
> (XEN)     gpa=000000004ae06704

Dom0 is trying to access to 4ae06704 which is not mapped. Do you know
where does this address come from (device tree, hardcoded, ...)?

> (XEN)     size=2 sign=0 write=0 reg=0
> (XEN)     eat=0 cm=0 s1ptw=0 dfsc=7
> (XEN) dom0 IPA 0x000000004ae06704
> (XEN) P2M @ 02fdbf80 mfn:0xfedfc
> (XEN) 1ST[0x1] = 0x00000000fedfe6ff
> (XEN) 2ND[0x57] = 0x00000000ac9796ff
> (XEN) 3RD[0x6] = 0x0000000000000000
> (XEN) ----[ Xen-4.4-unstable  arm32  debug=y  Not tainted ]----
> (XEN) CPU:    0
> (XEN) PC:     c0033410

To help you, you can use "addr2line -e vmlinux address" to find the
faulty line in linux. Where address is your pc.

Cheers,

-- 
Julien Grall