Re: Domain 0 crashed when booting OMAP5 uEVM

[Chen Baozi <baozich@gmail.com>]

On Aug 12, 2013, at 10:30 PM, Andrii Anisov <andrii.anisov@globallogic.com> wrote:

> 
> 
> 
> > - Turning on paging -
> > - Ready -
> > fdt: node `cpu@0': invalid #address-cells or #size-cellsfdt: node `cpu@1':
> > - invalid #addref
> 
> Hum ... this is why Xen can't find the other cpus. Could you paste the
> content of the node cpus here?
> 
> 
> I bet, something like this:
> 
>         };
>  
>         cpus {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
>                 cpu@0 {
> +                       device_type = "cpu";
>                         compatible = "arm,cortex-a15";
> +                       reg = <0>;
>                         operating-points = <
>                                 /* kHz    uV */
>                                 /* Only for Nominal Samples */
> @@ -48,7 +53,9 @@
>                         clock-latency = <300000>; /* From omap-cpufreq driver */
>                 };
>                 cpu@1 {
> +                       device_type = "cpu";
>                         compatible = "arm,cortex-a15";
> +                       reg = <1>;
>                 };
>         };
> 
> will help to Chen.

I used the original 3.8 kernel's dts from TI. And the cpu node (I've modified
to move the timer node outside it) is like:

	cpus {
		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x0>;
		};
		cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x1>;
		};
	};

And I checked the latest git tree I've used, it is:

	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x0>;
		};
		cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x1>;
		};
	};

I'll check if the missing address-cells and size-cells caused my
issues.

Thanks.

Baozi

> 
> Sincerely,
> Andrii Anisov.