* [PATCH 0/3] scsi: ufs: Add support for clock and regulator initializaiton
@ 2013-08-13 11:00 Sujit Reddy Thumma
2013-08-13 11:00 ` [PATCH 1/3] scsi: ufs: Allow vendor specific initialization Sujit Reddy Thumma
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Sujit Reddy Thumma @ 2013-08-13 11:00 UTC (permalink / raw)
To: Vinayak Holikatti, Santosh Y
Cc: James E.J. Bottomley, linux-scsi, Sujit Reddy Thumma, linux-arm-msm
UFS HCI specificaiton allows the hardware vendors to have vendor specific
configurations using a dedicated register space. Most of these register
configurations are unique to each controller. The generic UFSHCD exports
a set of useful vendor operations that can be used to configure the host
controller. In addition, the vendor specific operations can also be used
to control the power supply of controller and Uni-Pro h/w blocks.
This patchset adds support for vendor specific initialization, regulator
and clock initialization based on device-tree properties.
Sujit Reddy Thumma (3):
scsi: ufs: Allow vendor specific initialization
scsi: ufs: Add regulator enable support
scsi: ufs: Add clock initialization support
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 31 ++
drivers/scsi/ufs/ufs.h | 23 +
drivers/scsi/ufs/ufshcd-pci.c | 8 +-
drivers/scsi/ufs/ufshcd-pltfrm.c | 176 ++++++++-
drivers/scsi/ufs/ufshcd.c | 433 ++++++++++++++++++--
drivers/scsi/ufs/ufshcd.h | 55 +++-
6 files changed, 689 insertions(+), 37 deletions(-)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/3] scsi: ufs: Allow vendor specific initialization
2013-08-13 11:00 [PATCH 0/3] scsi: ufs: Add support for clock and regulator initializaiton Sujit Reddy Thumma
@ 2013-08-13 11:00 ` Sujit Reddy Thumma
2013-08-13 13:53 ` Josh Cartwright
2013-08-13 11:00 ` [PATCH 2/3] scsi: ufs: Add regulator enable support Sujit Reddy Thumma
2013-08-13 11:00 ` [PATCH 3/3] scsi: ufs: Add clock initialization support Sujit Reddy Thumma
2 siblings, 1 reply; 6+ messages in thread
From: Sujit Reddy Thumma @ 2013-08-13 11:00 UTC (permalink / raw)
To: Vinayak Holikatti, Santosh Y
Cc: James E.J. Bottomley, linux-scsi, Sujit Reddy Thumma, linux-arm-msm
Some vendor specific controller versions might need to configure
vendor specific - registers, clocks, voltage regulators etc. to
initialize the host controller UTP layer and Uni-Pro stack.
Provide some common initialization operations that can be used
to configure vendor specifics. The methods can be extended in
future, for example, for power mode transitions.
The operations are vendor/board specific and hence determined with
the help of compatible property in device tree.
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
---
drivers/scsi/ufs/ufshcd-pci.c | 8 ++-
drivers/scsi/ufs/ufshcd-pltfrm.c | 23 +++++-
drivers/scsi/ufs/ufshcd.c | 157 ++++++++++++++++++++++++++++++--------
drivers/scsi/ufs/ufshcd.h | 34 ++++++++-
4 files changed, 185 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index a823cf4..829f7a4 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -191,7 +191,13 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return err;
}
- err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq);
+ err = ufshcd_alloc_host(&pdev->dev, &hba);
+ if (err) {
+ dev_err(&pdev->dev, "Allocation failed\n");
+ goto out_iounmap
+ }
+
+ err = ufshcd_init(hba, mmio_base, pdev->irq);
if (err) {
dev_err(&pdev->dev, "Initialization failed\n");
return err;
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 5e46232..3e0a14f 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -35,9 +35,22 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
#include "ufshcd.h"
+static const struct of_device_id ufs_of_match[];
+static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
+{
+ if (dev->of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(ufs_of_match, dev->of_node);
+ return (struct ufs_hba_variant_ops *)match->data;
+ }
+
+ return NULL;
+}
+
#ifdef CONFIG_PM
/**
* ufshcd_pltfrm_suspend - suspend power management function
@@ -150,10 +163,18 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
goto out;
}
+ err = ufshcd_alloc_host(dev, &hba);
+ if (err) {
+ dev_err(&pdev->dev, "Allocation failed\n");
+ goto out;
+ }
+
+ hba->vops = get_variant_ops(&pdev->dev);
+
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- err = ufshcd_init(dev, &hba, mmio_base, irq);
+ err = ufshcd_init(hba, mmio_base, irq);
if (err) {
dev_err(dev, "Intialization failed\n");
goto out_disable_rpm;
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 4dca9b4..c539347 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -174,13 +174,14 @@ static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba)
/**
* ufshcd_is_device_present - Check if any device connected to
* the host controller
- * @reg_hcs - host controller status register value
+ * @hba: pointer to adapter instance
*
* Returns 1 if device present, 0 if no device detected
*/
-static inline int ufshcd_is_device_present(u32 reg_hcs)
+static inline int ufshcd_is_device_present(struct ufs_hba *hba)
{
- return (DEVICE_PRESENT & reg_hcs) ? 1 : 0;
+ return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) &
+ DEVICE_PRESENT) ? 1 : 0;
}
/**
@@ -1483,11 +1484,10 @@ out:
* @hba: per adapter instance
*
* To bring UFS host controller to operational state,
- * 1. Check if device is present
- * 2. Enable required interrupts
- * 3. Configure interrupt aggregation
- * 4. Program UTRL and UTMRL base addres
- * 5. Configure run-stop-registers
+ * 1. Enable required interrupts
+ * 2. Configure interrupt aggregation
+ * 3. Program UTRL and UTMRL base addres
+ * 4. Configure run-stop-registers
*
* Returns 0 on success, non-zero value on failure
*/
@@ -1496,14 +1496,6 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
int err = 0;
u32 reg;
- /* check if device present */
- reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS);
- if (!ufshcd_is_device_present(reg)) {
- dev_err(hba->dev, "cc: Device not present\n");
- err = -ENXIO;
- goto out;
- }
-
/* Enable required interrupts */
ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);
@@ -1524,6 +1516,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
* UCRDY, UTMRLDY and UTRLRDY bits must be 1
* DEI, HEI bits must be 0
*/
+ reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS);
if (!(ufshcd_get_lists_status(reg))) {
ufshcd_enable_run_stop_reg(hba);
} else {
@@ -1570,6 +1563,9 @@ static int ufshcd_hba_enable(struct ufs_hba *hba)
msleep(5);
}
+ if (hba->vops && hba->vops->hce_enable_notify)
+ hba->vops->hce_enable_notify(hba, PRE_CHANGE);
+
/* start controller initialization sequence */
ufshcd_hba_start(hba);
@@ -1597,6 +1593,10 @@ static int ufshcd_hba_enable(struct ufs_hba *hba)
}
msleep(5);
}
+
+ if (hba->vops && hba->vops->hce_enable_notify)
+ hba->vops->hce_enable_notify(hba, POST_CHANGE);
+
return 0;
}
@@ -1613,12 +1613,28 @@ static int ufshcd_link_startup(struct ufs_hba *hba)
/* enable UIC related interrupts */
ufshcd_enable_intr(hba, UIC_COMMAND_COMPL);
+ if (hba->vops && hba->vops->link_startup_notify)
+ hba->vops->link_startup_notify(hba, PRE_CHANGE);
+
ret = ufshcd_dme_link_startup(hba);
if (ret)
goto out;
- ret = ufshcd_make_hba_operational(hba);
+ /* check if device is detected by inter-connect layer */
+ if (!ufshcd_is_device_present(hba)) {
+ dev_err(hba->dev, "%s: Device not present\n", __func__);
+ ret = -ENXIO;
+ goto out;
+ }
+
+ /* Include any host controller configuration via UIC commands */
+ if (hba->vops && hba->vops->link_startup_notify) {
+ ret = hba->vops->link_startup_notify(hba, POST_CHANGE);
+ if (ret)
+ goto out;
+ }
+ ret = ufshcd_make_hba_operational(hba);
out:
if (ret)
dev_err(hba->dev, "link startup failed %d\n", ret);
@@ -2810,6 +2826,61 @@ static struct scsi_host_template ufshcd_driver_template = {
.can_queue = UFSHCD_CAN_QUEUE,
};
+static int ufshcd_variant_hba_init(struct ufs_hba *hba)
+{
+ int err = 0;
+
+ if (!hba->vops)
+ goto out;
+
+ if (hba->vops->init) {
+ err = hba->vops->init(hba);
+ if (err)
+ goto out;
+ }
+
+ if (hba->vops->setup_clocks) {
+ err = hba->vops->setup_clocks(hba, true);
+ if (err)
+ goto out_exit;
+ }
+
+ if (hba->vops->setup_regulators) {
+ err = hba->vops->setup_regulators(hba, true);
+ if (err)
+ goto out_clks;
+ }
+
+ goto out;
+
+out_clks:
+ if (hba->vops->setup_clocks)
+ hba->vops->setup_clocks(hba, false);
+out_exit:
+ if (hba->vops->exit)
+ hba->vops->exit(hba);
+out:
+ if (err)
+ dev_err(hba->dev, "%s: variant %s init failed err %d\n",
+ __func__, hba->vops ? hba->vops->name : "", err);
+ return err;
+}
+
+static void ufshcd_variant_hba_exit(struct ufs_hba *hba)
+{
+ if (!hba->vops)
+ return;
+
+ if (hba->vops->setup_clocks)
+ hba->vops->setup_clocks(hba, false);
+
+ if (hba->vops->setup_regulators)
+ hba->vops->setup_regulators(hba, false);
+
+ if (hba->vops->exit)
+ hba->vops->exit(hba);
+}
+
/**
* ufshcd_suspend - suspend power management function
* @hba: per adapter instance
@@ -2894,23 +2965,22 @@ void ufshcd_remove(struct ufs_hba *hba)
ufshcd_hba_stop(hba);
scsi_host_put(hba->host);
+
+ ufshcd_variant_hba_exit(hba);
}
EXPORT_SYMBOL_GPL(ufshcd_remove);
/**
- * ufshcd_init - Driver initialization routine
+ * ufshcd_alloc_host - allocate Host Bus Adapter (HBA)
* @dev: pointer to device handle
* @hba_handle: driver private handle
- * @mmio_base: base register address
- * @irq: Interrupt line of device
* Returns 0 on success, non-zero value on failure
*/
-int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
- void __iomem *mmio_base, unsigned int irq)
+int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle)
{
struct Scsi_Host *host;
struct ufs_hba *hba;
- int err;
+ int err = 0;
if (!dev) {
dev_err(dev,
@@ -2919,13 +2989,6 @@ int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
goto out_error;
}
- if (!mmio_base) {
- dev_err(dev,
- "Invalid memory reference for mmio_base is NULL\n");
- err = -ENODEV;
- goto out_error;
- }
-
host = scsi_host_alloc(&ufshcd_driver_template,
sizeof(struct ufs_hba));
if (!host) {
@@ -2936,9 +2999,40 @@ int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
hba = shost_priv(host);
hba->host = host;
hba->dev = dev;
+ *hba_handle = hba;
+
+out_error:
+ return err;
+}
+EXPORT_SYMBOL(ufshcd_alloc_host);
+
+/**
+ * ufshcd_init - Driver initialization routine
+ * @hba: per-adapter instance
+ * @mmio_base: base register address
+ * @irq: Interrupt line of device
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
+{
+ int err;
+ struct Scsi_Host *host = hba->host;
+ struct device *dev = hba->dev;
+
+ if (!mmio_base) {
+ dev_err(hba->dev,
+ "Invalid memory reference for mmio_base is NULL\n");
+ err = -ENODEV;
+ goto out_disable;
+ }
+
hba->mmio_base = mmio_base;
hba->irq = irq;
+ err = ufshcd_variant_hba_init(hba);
+ if (err)
+ goto out_disable;
+
/* Read capabilities registers */
ufshcd_hba_capabilities(hba);
@@ -3010,8 +3104,6 @@ int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
goto out_remove_scsi_host;
}
- *hba_handle = hba;
-
/* Hold auto suspend until async scan completes */
pm_runtime_get_sync(dev);
@@ -3023,7 +3115,6 @@ out_remove_scsi_host:
scsi_remove_host(hba->host);
out_disable:
scsi_host_put(host);
-out_error:
return err;
}
EXPORT_SYMBOL_GPL(ufshcd_init);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 8f5624e..72acbc7 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -68,6 +68,8 @@
#define UFSHCD "ufshcd"
#define UFSHCD_DRIVER_VERSION "0.2"
+struct ufs_hba;
+
enum dev_cmd_type {
DEV_CMD_TYPE_NOP = 0x0,
DEV_CMD_TYPE_QUERY = 0x1,
@@ -152,6 +154,30 @@ struct ufs_dev_cmd {
struct ufs_query query;
};
+#define PRE_CHANGE 0
+#define POST_CHANGE 1
+/**
+ * struct ufs_hba_variant_ops - variant specific callbacks
+ * @name: variant name
+ * @init: called when the driver is initialized
+ * @exit: called to cleanup everything done in init
+ * @setup_clocks: called before touching any of the controller registers
+ * @setup_regulators: called before accessing the host controller
+ * @hce_enable_notify: called before and after HCE enable bit is set to allow
+ * variant specific Uni-Pro initialization.
+ * @link_startup_notify: called before and after Link startup is carried out
+ * to allow variant specific Uni-Pro initialization.
+ */
+struct ufs_hba_variant_ops {
+ const char *name;
+ int (*init)(struct ufs_hba *);
+ void (*exit)(struct ufs_hba *);
+ int (*setup_clocks)(struct ufs_hba *, bool);
+ int (*setup_regulators)(struct ufs_hba *, bool);
+ int (*hce_enable_notify)(struct ufs_hba *, bool);
+ int (*link_startup_notify)(struct ufs_hba *, bool);
+};
+
/**
* struct ufs_hba - per adapter private structure
* @mmio_base: UFSHCI base register address
@@ -171,6 +197,8 @@ struct ufs_dev_cmd {
* @nutrs: Transfer Request Queue depth supported by controller
* @nutmrs: Task Management Queue depth supported by controller
* @ufs_version: UFS Version to which controller complies
+ * @vops: pointer to variant specific operations
+ * @priv: pointer to variant specific private data
* @irq: Irq number of the controller
* @active_uic_cmd: handle of active UIC command
* @uic_cmd_mutex: mutex for uic command
@@ -217,6 +245,8 @@ struct ufs_hba {
int nutrs;
int nutmrs;
u32 ufs_version;
+ struct ufs_hba_variant_ops *vops;
+ void *priv;
unsigned int irq;
struct uic_command *active_uic_cmd;
@@ -253,8 +283,8 @@ struct ufs_hba {
#define ufshcd_readl(hba, reg) \
readl((hba)->mmio_base + (reg))
-int ufshcd_init(struct device *, struct ufs_hba ** , void __iomem * ,
- unsigned int);
+int ufshcd_alloc_host(struct device *, struct ufs_hba **);
+int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
void ufshcd_remove(struct ufs_hba *);
/**
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/3] scsi: ufs: Add regulator enable support
2013-08-13 11:00 [PATCH 0/3] scsi: ufs: Add support for clock and regulator initializaiton Sujit Reddy Thumma
2013-08-13 11:00 ` [PATCH 1/3] scsi: ufs: Allow vendor specific initialization Sujit Reddy Thumma
@ 2013-08-13 11:00 ` Sujit Reddy Thumma
2013-08-13 11:00 ` [PATCH 3/3] scsi: ufs: Add clock initialization support Sujit Reddy Thumma
2 siblings, 0 replies; 6+ messages in thread
From: Sujit Reddy Thumma @ 2013-08-13 11:00 UTC (permalink / raw)
To: Vinayak Holikatti, Santosh Y
Cc: James E.J. Bottomley, linux-scsi, Sujit Reddy Thumma,
linux-arm-msm, devicetree
UFS devices are powered by at most three external power supplies -
- VCC - The flash memory core power supply, 2.7V to 3.6V or 1.70V to 1.95V
- VCCQ - The controller and I/O power supply, 1.1V to 1.3V
- VCCQ2 - Secondary controller and/or I/O power supply, 1.65V to 1.95V
For some devices VCCQ or VCCQ2 are optional as they can be
generated using internal LDO inside the UFS device.
Add DT bindings for voltage regulators that can be controlled
from host driver.
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
---
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 18 ++
drivers/scsi/ufs/ufs.h | 23 +++
drivers/scsi/ufs/ufshcd-pltfrm.c | 89 +++++++++
drivers/scsi/ufs/ufshcd.c | 194 +++++++++++++++++++-
drivers/scsi/ufs/ufshcd.h | 3 +
5 files changed, 325 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 20468b2..39ee11f 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -8,9 +8,27 @@ Required properties:
- interrupts : <interrupt mapping for UFS host controller IRQ>
- reg : <registers mapping>
+Optional properties:
+- vcc-supply : phandle to VCC supply regulator node
+- vccq-supply : phandle to VCCQ supply regulator node
+- vccq2-supply : phandle to VCCQ2 supply regulator node
+- vcc-max-microamp : specifies max. load that can be drawn from vcc supply
+- vccq-max-microamp : specifies max. load that can be drawn from vccq supply
+- vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply
+
+Note: If above properties are not defined it can be assumed that the supply
+regulators are always on.
+
Example:
ufshc@0xfc598000 {
compatible = "jedec,ufs-1.1";
reg = <0xfc598000 0x800>;
interrupts = <0 28 0>;
+
+ vcc-supply = <&xxx_reg1>;
+ vccq-supply = <&xxx_reg2>;
+ vccq2-supply = <&xxx_reg3>;
+ vcc-max-microamp = 500000;
+ vccq-max-microamp = 200000;
+ vccq2-max-microamp = 200000;
};
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index bce09a6..f8e37bf 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -325,4 +325,27 @@ struct ufs_query_res {
struct utp_upiu_query upiu_res;
};
+#define UFS_VREG_VCC_MIN 2700000 /* uV */
+#define UFS_VREG_VCC_MAX 3600000 /* uV */
+#define UFS_VREG_VCCQ_MIN 1150000 /* uV */
+#define UFS_VREG_VCCQ_MAX 1300000 /* uV */
+#define UFS_VREG_VCCQ2_MIN 1700000 /* uV */
+#define UFS_VREG_VCCQ2_MAX 1950000 /* uV */
+
+struct ufs_vreg {
+ struct regulator *reg;
+ const char *name;
+ bool enabled;
+ int min_uV;
+ int max_uV;
+ int min_uA;
+ int max_uA;
+};
+
+struct ufs_vreg_info {
+ struct ufs_vreg *vcc;
+ struct ufs_vreg *vccq;
+ struct ufs_vreg *vccq2;
+};
+
#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 3e0a14f..1c5290d 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -51,6 +51,88 @@ static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
return NULL;
}
+#define MAX_PROP_SIZE 32
+static int ufshcd_populate_vreg(struct device *dev, const char *name,
+ struct ufs_vreg **out_vreg)
+{
+ int ret = 0;
+ u32 temp = 0;
+ char prop_name[MAX_PROP_SIZE];
+ struct ufs_vreg *vreg = NULL;
+ struct device_node *np = dev->of_node;
+
+ if (!np) {
+ dev_err(dev, "%s: non DT initialization\n", __func__);
+ goto out;
+ }
+
+ snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", name);
+ if (!of_parse_phandle(np, prop_name, 0)) {
+ dev_info(dev, "%s: Unable to find %s regulator, assuming enabled\n",
+ __func__, name);
+ goto out;
+ }
+
+ vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ dev_err(dev, "No memory for %s regulator\n", name);
+ goto out;
+ }
+
+ vreg->name = kstrdup(name, GFP_KERNEL);
+
+ snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
+ ret = of_property_read_u32_array(np, prop_name, &temp, 1);
+ if (!ret) {
+ vreg->max_uA = temp;
+ } else {
+ dev_err(dev, "%s: unable to find %s err %d\n",
+ __func__, prop_name, ret);
+ goto out_free;
+ }
+
+ vreg->min_uA = 0;
+ if (!strcmp(name, "vcc")) {
+ vreg->min_uV = UFS_VREG_VCC_MIN;
+ vreg->max_uV = UFS_VREG_VCC_MAX;
+ } else if (!strcmp(name, "vccq")) {
+ vreg->min_uV = UFS_VREG_VCCQ_MIN;
+ vreg->max_uV = UFS_VREG_VCCQ_MAX;
+ } else if (!strcmp(name, "vccq2")) {
+ vreg->min_uV = UFS_VREG_VCCQ2_MIN;
+ vreg->max_uV = UFS_VREG_VCCQ2_MAX;
+ }
+
+ goto out;
+
+out_free:
+ devm_kfree(dev, vreg);
+ vreg = NULL;
+out:
+ if (!ret)
+ *out_vreg = vreg;
+ return ret;
+}
+
+static int ufshcd_parse_regulator_info(struct ufs_hba *hba)
+{
+ int err;
+ struct device *dev = hba->dev;
+ struct ufs_vreg_info *info = &hba->vreg_info;
+
+ err = ufshcd_populate_vreg(dev, "vcc", &info->vcc);
+ if (err)
+ goto out;
+
+ err = ufshcd_populate_vreg(dev, "vccq", &info->vccq);
+ if (err)
+ goto out;
+
+ err = ufshcd_populate_vreg(dev, "vccq2", &info->vccq2);
+out:
+ return err;
+}
+
#ifdef CONFIG_PM
/**
* ufshcd_pltfrm_suspend - suspend power management function
@@ -171,6 +253,13 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
hba->vops = get_variant_ops(&pdev->dev);
+ err = ufshcd_parse_regulator_info(hba);
+ if (err) {
+ dev_err(&pdev->dev, "%s: regulator init failed %d\n",
+ __func__, err);
+ goto out;
+ }
+
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index c539347..ab7b943 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2826,6 +2826,166 @@ static struct scsi_host_template ufshcd_driver_template = {
.can_queue = UFSHCD_CAN_QUEUE,
};
+static int ufshcd_config_vreg(struct device *dev,
+ struct ufs_vreg *vreg, bool on)
+{
+ int ret = 0;
+ struct regulator *reg = vreg->reg;
+ const char *name = vreg->name;
+ int min_uV, max_uV, uA_load;
+
+ BUG_ON(!vreg);
+
+ min_uV = vreg->min_uV;
+ max_uV = vreg->max_uV;
+
+ if (on)
+ uA_load = vreg->max_uA;
+ else
+ uA_load = 0;
+
+ if (regulator_count_voltages(reg) > 0) {
+ ret = regulator_set_voltage(reg, min_uV, max_uV);
+ if (ret) {
+ dev_err(dev, "%s: %s set voltage failed, err=%d\n",
+ __func__, name, ret);
+ goto out;
+ }
+
+ ret = regulator_set_optimum_mode(reg, uA_load);
+ if (ret < 0) {
+ dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n",
+ __func__, name, uA_load, ret);
+ goto out;
+ } else {
+ /*
+ * regulator_set_optimum_mode() can return non zero
+ * value even for success case.
+ */
+ ret = 0;
+ }
+ }
+out:
+ return ret;
+}
+
+static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg)
+{
+ int ret = 0;
+
+ if (!vreg || vreg->enabled)
+ goto out;
+
+ ret = ufshcd_config_vreg(dev, vreg, true);
+ if (!ret)
+ ret = regulator_enable(vreg->reg);
+
+ if (!ret)
+ vreg->enabled = true;
+ else
+ dev_err(dev, "%s: %s enable failed, err=%d\n",
+ __func__, vreg->name, ret);
+out:
+ return ret;
+}
+
+static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg)
+{
+ int ret = 0;
+
+ if (!vreg || !vreg->enabled)
+ goto out;
+
+ ret = regulator_disable(vreg->reg);
+
+ if (!ret) {
+ /* ignore errors on applying disable config */
+ ufshcd_config_vreg(dev, vreg, false);
+ vreg->enabled = false;
+ } else {
+ dev_err(dev, "%s: %s disable failed, err=%d\n",
+ __func__, vreg->name, ret);
+ }
+out:
+ return ret;
+}
+
+static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on)
+{
+ int ret = 0;
+ struct device *dev = hba->dev;
+ struct ufs_vreg_info *info = &hba->vreg_info;
+
+ if (!info)
+ goto out;
+
+ if (on) {
+ ret = ufshcd_enable_vreg(dev, info->vcc);
+ if (ret)
+ goto out;
+
+ ret = ufshcd_enable_vreg(dev, info->vccq);
+ if (ret)
+ goto out_disable_vcc;
+
+ ret = ufshcd_enable_vreg(dev, info->vccq2);
+ if (ret)
+ goto out_disable_vccq;
+ } else {
+ ufshcd_disable_vreg(dev, info->vcc);
+ ufshcd_disable_vreg(dev, info->vccq);
+ ufshcd_disable_vreg(dev, info->vccq2);
+ }
+
+ goto out;
+
+out_disable_vccq:
+ ufshcd_disable_vreg(dev, info->vccq);
+out_disable_vcc:
+ ufshcd_disable_vreg(dev, info->vcc);
+out:
+ return ret;
+}
+
+static int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg)
+{
+ int ret = 0;
+
+ if (!vreg)
+ goto out;
+
+ vreg->reg = devm_regulator_get(dev, vreg->name);
+ if (IS_ERR(vreg->reg)) {
+ ret = PTR_ERR(vreg->reg);
+ dev_err(dev, "%s: %s get failed, err=%d\n",
+ __func__, vreg->name, ret);
+ }
+out:
+ return ret;
+}
+
+static int ufshcd_init_vreg(struct ufs_hba *hba)
+{
+ int ret = 0;
+ struct device *dev = hba->dev;
+ struct ufs_vreg_info *info = &hba->vreg_info;
+
+ if (!info)
+ goto out;
+
+ ret = ufshcd_get_vreg(dev, info->vcc);
+ if (ret)
+ goto out;
+
+ ret = ufshcd_get_vreg(dev, info->vccq);
+ if (ret)
+ goto out;
+
+ ret = ufshcd_get_vreg(dev, info->vccq2);
+out:
+ return ret;
+}
+
static int ufshcd_variant_hba_init(struct ufs_hba *hba)
{
int err = 0;
@@ -2881,6 +3041,36 @@ static void ufshcd_variant_hba_exit(struct ufs_hba *hba)
hba->vops->exit(hba);
}
+static int ufs_hba_init(struct ufs_hba *hba)
+{
+ int err;
+
+ err = ufshcd_init_vreg(hba);
+ if (err)
+ goto out;
+
+ err = ufshcd_setup_vreg(hba, true);
+ if (err)
+ goto out;
+
+ err = ufshcd_variant_hba_init(hba);
+ if (err)
+ goto out_disable_vreg;
+
+ goto out;
+
+out_disable_vreg:
+ ufshcd_setup_vreg(hba, false);
+out:
+ return err;
+}
+
+static void ufs_hba_exit(struct ufs_hba *hba)
+{
+ ufshcd_variant_hba_exit(hba);
+ ufshcd_setup_vreg(hba, false);
+}
+
/**
* ufshcd_suspend - suspend power management function
* @hba: per adapter instance
@@ -2966,7 +3156,7 @@ void ufshcd_remove(struct ufs_hba *hba)
scsi_host_put(hba->host);
- ufshcd_variant_hba_exit(hba);
+ ufs_hba_exit(hba);
}
EXPORT_SYMBOL_GPL(ufshcd_remove);
@@ -3029,7 +3219,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
hba->mmio_base = mmio_base;
hba->irq = irq;
- err = ufshcd_variant_hba_init(hba);
+ err = ufs_hba_init(hba);
if (err)
goto out_disable;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 72acbc7..c137ca4 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -61,6 +61,7 @@
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
+#include <linux/regulator/consumer.h>
#include "ufs.h"
#include "ufshci.h"
@@ -218,6 +219,7 @@ struct ufs_hba_variant_ops {
* @saved_uic_err: sticky UIC error mask
* @dev_cmd: ufs device management command information
* @auto_bkops_enabled: to track whether bkops is enabled in device
+ * @vreg_info: UFS device voltage regulator information
*/
struct ufs_hba {
void __iomem *mmio_base;
@@ -276,6 +278,7 @@ struct ufs_hba {
struct ufs_dev_cmd dev_cmd;
bool auto_bkops_enabled;
+ struct ufs_vreg_info vreg_info;
};
#define ufshcd_writel(hba, val, reg) \
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/3] scsi: ufs: Add clock initialization support
2013-08-13 11:00 [PATCH 0/3] scsi: ufs: Add support for clock and regulator initializaiton Sujit Reddy Thumma
2013-08-13 11:00 ` [PATCH 1/3] scsi: ufs: Allow vendor specific initialization Sujit Reddy Thumma
2013-08-13 11:00 ` [PATCH 2/3] scsi: ufs: Add regulator enable support Sujit Reddy Thumma
@ 2013-08-13 11:00 ` Sujit Reddy Thumma
2 siblings, 0 replies; 6+ messages in thread
From: Sujit Reddy Thumma @ 2013-08-13 11:00 UTC (permalink / raw)
To: Vinayak Holikatti, Santosh Y
Cc: James E.J. Bottomley, linux-scsi, Sujit Reddy Thumma,
linux-arm-msm, devicetree
Add generic clock initialization support for UFSHCD platform
driver. The clock info is read from device tree using standard
clock bindings. A generic max-clock-frequency-hz property is
defined to save information on maximum operating clock frequency
the h/w supports.
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
---
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 15 +++-
drivers/scsi/ufs/ufshcd-pltfrm.c | 64 ++++++++++++++
drivers/scsi/ufs/ufshcd.c | 90 +++++++++++++++++++-
drivers/scsi/ufs/ufshcd.h | 18 ++++
4 files changed, 184 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 39ee11f..d82c54c 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -16,8 +16,17 @@ Optional properties:
- vccq-max-microamp : specifies max. load that can be drawn from vccq supply
- vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply
+- clocks : List of phandle and clock specifier pairs
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property.
+- max-clock-frequency-hz : List of maximum operating frequency stored in the same
+ order as the clocks property. If this property is not
+ defined or a value in the array is "0" then it is assumed
+ that the frequency is set by the parent clock or a
+ fixed rate clock source.
+
Note: If above properties are not defined it can be assumed that the supply
-regulators are always on.
+regulators or clocks are always on.
Example:
ufshc@0xfc598000 {
@@ -31,4 +40,8 @@ Example:
vcc-max-microamp = 500000;
vccq-max-microamp = 200000;
vccq2-max-microamp = 200000;
+
+ clocks = <&core 0>, <&ref 0>, <&iface 0>;
+ clock-names = "core_clk", "ref_clk", "iface_clk";
+ max-clock-frequency-hz = <100000000 19200000 0>;
};
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 1c5290d..9bbcbcb 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -38,6 +38,7 @@
#include <linux/of.h>
#include "ufshcd.h"
+#define MAX_CLK_CNT 100
static const struct of_device_id ufs_of_match[];
static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
@@ -51,6 +52,63 @@ static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
return NULL;
}
+static int ufshcd_parse_clock_info(struct ufs_hba *hba)
+{
+ int ret = 0;
+ int cnt;
+ int i;
+ struct device *dev = hba->dev;
+ struct device_node *np = dev->of_node;
+ char *name;
+ u32 clkfreq[MAX_CLK_CNT] = {0};
+ struct ufs_clk_info *clki;
+
+ if (!np)
+ goto out;
+
+ INIT_LIST_HEAD(&hba->clk_list_head);
+
+ cnt = of_property_count_strings(np, "clock-names");
+ if (!cnt || (cnt == -EINVAL)) {
+ dev_info(dev, "%s: Unable to find clocks, assuming enabled\n",
+ __func__);
+ } else if (cnt < 0) {
+ dev_err(dev, "%s: count clock strings failed, err %d\n",
+ __func__, cnt);
+ ret = cnt;
+ }
+
+ if (cnt <= 0)
+ goto out;
+
+ ret = of_property_read_u32_array(np,
+ "max-clock-frequency-hz", clkfreq, cnt);
+ if (ret && (ret != -EINVAL)) {
+ dev_err(dev, "%s: invalid max-clock-frequency-hz property, %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ for (i = 0; i < cnt; i++) {
+ ret = of_property_read_string_index(np,
+ "clock-names", i, (const char **)&name);
+ if (ret)
+ goto out;
+
+ clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL);
+ if (!clki) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ clki->max_freq = clkfreq[i];
+ clki->name = kstrdup(name, GFP_KERNEL);
+ list_add_tail(&clki->list, &hba->clk_list_head);
+ }
+out:
+ return ret;
+}
+
#define MAX_PROP_SIZE 32
static int ufshcd_populate_vreg(struct device *dev, const char *name,
struct ufs_vreg **out_vreg)
@@ -253,6 +311,12 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
hba->vops = get_variant_ops(&pdev->dev);
+ err = ufshcd_parse_clock_info(hba);
+ if (err) {
+ dev_err(&pdev->dev, "%s: clock parse failed %d\n",
+ __func__, err);
+ goto out;
+ }
err = ufshcd_parse_regulator_info(hba);
if (err) {
dev_err(&pdev->dev, "%s: regulator init failed %d\n",
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ab7b943..0001941 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2986,6 +2986,81 @@ out:
return ret;
}
+static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
+{
+ int ret = 0;
+ struct ufs_clk_info *clki;
+ struct list_head *head = &hba->clk_list_head;
+
+ if (!head)
+ goto out;
+
+ list_for_each_entry(clki, head, list) {
+ if (!IS_ERR_OR_NULL(clki->clk)) {
+ if (on && !clki->enabled) {
+ ret = clk_prepare_enable(clki->clk);
+ if (ret) {
+ dev_err(hba->dev, "%s: %s prepare enable failed, %d\n",
+ __func__, clki->name, ret);
+ goto out;
+ }
+ clki->enabled = true;
+ } else if (!on && clki->enabled) {
+ clk_disable_unprepare(clki->clk);
+ clki->enabled = false;
+ }
+ dev_dbg(hba->dev, "%s: clk: %s %sabled\n", __func__,
+ clki->name, on ? "en" : "dis");
+ }
+ }
+out:
+ if (ret) {
+ list_for_each_entry(clki, head, list) {
+ if (!IS_ERR_OR_NULL(clki->clk) && clki->enabled)
+ clk_disable_unprepare(clki->clk);
+ }
+ }
+ return ret;
+}
+
+static int ufshcd_init_clocks(struct ufs_hba *hba)
+{
+ int ret = 0;
+ struct ufs_clk_info *clki;
+ struct device *dev = hba->dev;
+ struct list_head *head = &hba->clk_list_head;
+
+ if (!head)
+ goto out;
+
+ list_for_each_entry(clki, head, list) {
+ if (!clki->name)
+ continue;
+
+ clki->clk = devm_clk_get(dev, clki->name);
+ if (IS_ERR(clki->clk)) {
+ ret = PTR_ERR(clki->clk);
+ dev_err(dev, "%s: %s clk get failed, %d\n",
+ __func__, clki->name, ret);
+ goto out;
+ }
+
+ if (clki->max_freq) {
+ ret = clk_set_rate(clki->clk, clki->max_freq);
+ if (ret) {
+ dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n",
+ __func__, clki->name,
+ clki->max_freq, ret);
+ goto out;
+ }
+ }
+ dev_dbg(dev, "%s: clk: %s, rate: %lu\n", __func__,
+ clki->name, clk_get_rate(clki->clk));
+ }
+out:
+ return ret;
+}
+
static int ufshcd_variant_hba_init(struct ufs_hba *hba)
{
int err = 0;
@@ -3045,14 +3120,22 @@ static int ufs_hba_init(struct ufs_hba *hba)
{
int err;
- err = ufshcd_init_vreg(hba);
+ err = ufshcd_init_clocks(hba);
if (err)
goto out;
- err = ufshcd_setup_vreg(hba, true);
+ err = ufshcd_setup_clocks(hba, true);
if (err)
goto out;
+ err = ufshcd_init_vreg(hba);
+ if (err)
+ goto out_disable_clks;
+
+ err = ufshcd_setup_vreg(hba, true);
+ if (err)
+ goto out_disable_clks;
+
err = ufshcd_variant_hba_init(hba);
if (err)
goto out_disable_vreg;
@@ -3061,6 +3144,8 @@ static int ufs_hba_init(struct ufs_hba *hba)
out_disable_vreg:
ufshcd_setup_vreg(hba, false);
+out_disable_clks:
+ ufshcd_setup_clocks(hba, false);
out:
return err;
}
@@ -3069,6 +3154,7 @@ static void ufs_hba_exit(struct ufs_hba *hba)
{
ufshcd_variant_hba_exit(hba);
ufshcd_setup_vreg(hba, false);
+ ufshcd_setup_clocks(hba, false);
}
/**
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index c137ca4..8773e2b 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -155,6 +155,22 @@ struct ufs_dev_cmd {
struct ufs_query query;
};
+/**
+ * struct ufs_clk_info - UFS clock related info
+ * @list: list headed by hba->clk_list_head
+ * @clk: clock node
+ * @name: clock name
+ * @max_freq: maximum frequency supported by the clock
+ * @enabled: variable to check against multiple enable/disable
+ */
+struct ufs_clk_info {
+ struct list_head list;
+ struct clk *clk;
+ const char *name;
+ u32 max_freq;
+ bool enabled;
+};
+
#define PRE_CHANGE 0
#define POST_CHANGE 1
/**
@@ -220,6 +236,7 @@ struct ufs_hba_variant_ops {
* @dev_cmd: ufs device management command information
* @auto_bkops_enabled: to track whether bkops is enabled in device
* @vreg_info: UFS device voltage regulator information
+ * @clk_list_head: UFS host controller clocks list node head
*/
struct ufs_hba {
void __iomem *mmio_base;
@@ -279,6 +296,7 @@ struct ufs_hba {
bool auto_bkops_enabled;
struct ufs_vreg_info vreg_info;
+ struct list_head clk_list_head;
};
#define ufshcd_writel(hba, val, reg) \
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] scsi: ufs: Allow vendor specific initialization
2013-08-13 11:00 ` [PATCH 1/3] scsi: ufs: Allow vendor specific initialization Sujit Reddy Thumma
@ 2013-08-13 13:53 ` Josh Cartwright
2013-08-13 14:12 ` Sujit Reddy Thumma
0 siblings, 1 reply; 6+ messages in thread
From: Josh Cartwright @ 2013-08-13 13:53 UTC (permalink / raw)
To: Sujit Reddy Thumma
Cc: Vinayak Holikatti, Santosh Y, James E.J. Bottomley, linux-scsi,
linux-arm-msm
On Tue, Aug 13, 2013 at 04:30:18PM +0530, Sujit Reddy Thumma wrote:
[..]
> diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
> index a823cf4..829f7a4 100644
> --- a/drivers/scsi/ufs/ufshcd-pci.c
> +++ b/drivers/scsi/ufs/ufshcd-pci.c
> @@ -191,7 +191,13 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> return err;
> }
>
> - err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq);
> + err = ufshcd_alloc_host(&pdev->dev, &hba);
> + if (err) {
> + dev_err(&pdev->dev, "Allocation failed\n");
> + goto out_iounmap
You seem to be missing a semicolon here.
Also, which tree were these patches generated against? They fail to
apply at least on the last few 3.11-rc's.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] scsi: ufs: Allow vendor specific initialization
2013-08-13 13:53 ` Josh Cartwright
@ 2013-08-13 14:12 ` Sujit Reddy Thumma
0 siblings, 0 replies; 6+ messages in thread
From: Sujit Reddy Thumma @ 2013-08-13 14:12 UTC (permalink / raw)
To: Josh Cartwright
Cc: Vinayak Holikatti, Santosh Y, James E.J. Bottomley, linux-scsi,
linux-arm-msm
On 8/13/2013 7:23 PM, Josh Cartwright wrote:
> On Tue, Aug 13, 2013 at 04:30:18PM +0530, Sujit Reddy Thumma wrote:
> [..]
>> diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
>> index a823cf4..829f7a4 100644
>> --- a/drivers/scsi/ufs/ufshcd-pci.c
>> +++ b/drivers/scsi/ufs/ufshcd-pci.c
>> @@ -191,7 +191,13 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>> return err;
>> }
>>
>> - err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq);
>> + err = ufshcd_alloc_host(&pdev->dev, &hba);
>> + if (err) {
>> + dev_err(&pdev->dev, "Allocation failed\n");
>> + goto out_iounmap
>
> You seem to be missing a semicolon here.
I should have compiled the with pci config enabled :)
>
> Also, which tree were these patches generated against? They fail to
> apply at least on the last few 3.11-rc's.
I have rebased on top of scsi-misc branch along with few UFS patches
that aren't merged ([PATCH 0/9] scsi:ufs: query, bkops support and
other fixes + [PATCH V5 0/4] scsi: ufs: Improve UFS error handling
patch series).
--
Regards,
Sujit
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-08-13 14:12 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-13 11:00 [PATCH 0/3] scsi: ufs: Add support for clock and regulator initializaiton Sujit Reddy Thumma
2013-08-13 11:00 ` [PATCH 1/3] scsi: ufs: Allow vendor specific initialization Sujit Reddy Thumma
2013-08-13 13:53 ` Josh Cartwright
2013-08-13 14:12 ` Sujit Reddy Thumma
2013-08-13 11:00 ` [PATCH 2/3] scsi: ufs: Add regulator enable support Sujit Reddy Thumma
2013-08-13 11:00 ` [PATCH 3/3] scsi: ufs: Add clock initialization support Sujit Reddy Thumma
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.