All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hector Palacios <hector.palacios@digi.com>
To: Huang Shijie <b32955@freescale.com>
Cc: "fabio.estevam@freescale.com" <fabio.estevam@freescale.com>,
	Fabio Estevam <festevam@gmail.com>, Marek Vasut <marex@denx.de>,
	Huang Shijie <shijie8@gmail.com>,
	"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>
Subject: Re: gpmi-nand driver and jffs2 support
Date: Mon, 2 Sep 2013 10:42:45 +0200	[thread overview]
Message-ID: <52244F85.4030904@digi.com> (raw)
In-Reply-To: <52244B22.3020605@freescale.com>

Dear Huang,

On 09/02/2013 10:24 AM, Huang Shijie wrote:
> 于 2013年09月02日 16:12, Hector Palacios 写道:
>>> I think this SLC should be okay with jffs2.
>>>
>>>>>>
>>>>>> The partition now partially mounts (I can see a few of the folders
>>>>>> and
>>>>>> files) but I get thousands of errors like these:
>>>>>>
>>>>>> [ 118.210985] jffs2: mtd->read(0x100 bytes from 0x0) returned ECC
>>>>>> error
>>>>>> [ 118.255424] jffs2: mtd->read(0x1ff20 bytes from 0xe0) returned
>>>>>> ECC error
>>>>>> [ 118.255561] jffs2: jffs2_scan_inode_node(): CRC failed on node at
>>>>>> 0x000001ec: Read 0x00000000, calculated 0xa587e8ba
>>>>>> [ 118.255602] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985
>>>>>> not
>>>>>> found at 0x00000234: 0x1cf7 instead
>>>>>
>>>>> This error is most likely because you generated a jffs2 rootfs with a
>>>>> eraseblock size that does not match the one of your NAND device.
>>>>
>>>> No. I used 128k erase block that matches my NAND. I also checked
>>>> that I can mount the jffs2 partition correctly using my v2.6.35
>>>> kernel, so the partition seems to be correctly written.
>>>>
>>>
>>> Please use following steps and try again:
>>> flash_eraseall /dev/mtdx
>>> mount -t jffs2 /dev/mtdblockx tmp
>>
>> What's the purpose of this?
>> This works and doesn't output any error but it's mounting an erased
>> partition.
> Please test the patch set after you have erased a partition. Since the
> ECC layout may be changed after applying this
> patch set.
>
> So You may meet some errors if you do not do so.

I am writing the JFFS2 partition from my custom U-Boot. Do you mean that they way it 
writes it could not be compatible with what the new driver expects? That sounds really 
bad.
How do you write the partition in Linux?

Best regards,
--
Hector Palacios

  reply	other threads:[~2013-09-02  8:43 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-30  9:15 gpmi-nand driver and jffs2 support Hector Palacios
2013-08-30  9:55 ` Huang Shijie
2013-08-30 14:24   ` Hector Palacios
2013-08-31  2:53     ` Huang Shijie
2013-08-30 15:23       ` Hector Palacios
2013-08-31  3:34         ` Huang Shijie
2013-08-30 16:31           ` Hector Palacios
2013-08-30 16:37             ` Fabio Estevam
2013-08-30 16:41               ` Hector Palacios
2013-08-31 13:37                 ` Huang Shijie
2013-09-02  8:12                   ` Hector Palacios
2013-09-02  8:24                     ` Huang Shijie
2013-09-02  8:42                       ` Hector Palacios [this message]
2013-09-02  8:50                         ` Huang Shijie
2013-09-02 10:10                           ` Hector Palacios
2013-09-02 10:10                             ` [U-Boot] " Hector Palacios
2013-09-02 10:23                             ` Huang Shijie
2013-09-02 10:23                               ` [U-Boot] " Huang Shijie
2013-09-02 11:32                               ` Marek Vasut
2013-09-02 11:32                                 ` [U-Boot] " Marek Vasut
2013-09-03  2:06                                 ` Huang Shijie
2013-09-03  2:06                                   ` [U-Boot] " Huang Shijie
2013-09-03 11:53                                   ` Marek Vasut
2013-09-03 11:53                                     ` [U-Boot] " Marek Vasut
2013-09-04  2:26                                     ` Huang Shijie
2013-09-04  2:26                                       ` [U-Boot] " Huang Shijie
2013-09-04 14:00                                       ` Marek Vasut
2013-09-04 14:00                                         ` [U-Boot] " Marek Vasut
2013-09-05  2:41                                         ` Huang Shijie
2013-09-05  2:41                                           ` [U-Boot] " Huang Shijie
2013-09-04 14:38                                           ` Marek Vasut
2013-09-04 14:38                                             ` [U-Boot] " Marek Vasut
2013-09-04 15:46                                             ` Hector Palacios
2013-09-04 15:46                                               ` [U-Boot] " Hector Palacios
2013-09-05  6:01                                               ` Huang Shijie
2013-09-05  6:01                                                 ` [U-Boot] " Huang Shijie
2013-09-15 14:18                                                 ` Marek Vasut
2013-09-15 14:18                                                   ` [U-Boot] " Marek Vasut
2013-09-16  2:35                                                   ` Huang Shijie
2013-09-16  2:35                                                     ` [U-Boot] " Huang Shijie
2013-09-19 16:07                                                     ` Marek Vasut
2013-09-19 16:07                                                       ` [U-Boot] " Marek Vasut
2013-09-19 16:13                                                       ` Hector Palacios
2013-09-19 16:13                                                         ` [U-Boot] " Hector Palacios
2013-09-19 16:14                                                       ` Hector Palacios
2013-09-19 16:14                                                         ` [U-Boot] " Hector Palacios
2013-09-19 16:16                                                         ` Marek Vasut
2013-09-19 16:16                                                           ` [U-Boot] " Marek Vasut
2013-09-19 17:20                                                         ` Marek Vasut
2013-09-19 17:20                                                           ` [U-Boot] " Marek Vasut
2013-09-15 14:12                                               ` Marek Vasut
2013-09-15 14:12                                                 ` [U-Boot] " Marek Vasut
2013-08-31 17:51                 ` Huang Shijie
2013-09-24  9:50 ` Marek Vasut
2013-09-24 10:46   ` Huang Shijie
2013-09-24 12:53     ` Marek Vasut
2013-09-25  9:08       ` Huang Shijie
2013-09-29 22:52         ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52244F85.4030904@digi.com \
    --to=hector.palacios@digi.com \
    --cc=b32955@freescale.com \
    --cc=fabio.estevam@freescale.com \
    --cc=festevam@gmail.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marex@denx.de \
    --cc=shijie8@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.