* [U-Boot] [PATCH 0/3] cm_t35 tune up
@ 2013-10-07 14:28 Nikita Kiryanov
2013-10-07 14:28 ` [U-Boot] [PATCH 1/3] cm_t35: reduce default bootdelay to 3 seconds Nikita Kiryanov
` (4 more replies)
0 siblings, 5 replies; 9+ messages in thread
From: Nikita Kiryanov @ 2013-10-07 14:28 UTC (permalink / raw)
To: u-boot
This patchset is a collection of short cm_t35 updates. It changes some
configuration parameters and turns on GPIO commands.
Nikita Kiryanov (3):
cm_t35: reduce default bootdelay to 3 seconds
cm_t35: turn on GPIO commands
cm_t35: update lcd predefines
board/compulab/cm_t35/display.c | 8 +++++++-
include/configs/cm_t35.h | 3 ++-
2 files changed, 9 insertions(+), 2 deletions(-)
--
1.8.1.2
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 1/3] cm_t35: reduce default bootdelay to 3 seconds
2013-10-07 14:28 [U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
@ 2013-10-07 14:28 ` Nikita Kiryanov
2013-11-04 14:18 ` [U-Boot] [U-Boot, " Tom Rini
2013-10-07 14:28 ` [U-Boot] [PATCH 2/3] cm_t35: turn on GPIO commands Nikita Kiryanov
` (3 subsequent siblings)
4 siblings, 1 reply; 9+ messages in thread
From: Nikita Kiryanov @ 2013-10-07 14:28 UTC (permalink / raw)
To: u-boot
Current default bootdelay of 10 seconds is too long.
Reduce default bootdelay to 3 seconds.
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
---
include/configs/cm_t35.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index bc5b66c..f74ccdc 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -169,7 +169,7 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
/* Environment information */
-#define CONFIG_BOOTDELAY 10
+#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_EXTRA_ENV_SETTINGS \
--
1.8.1.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 2/3] cm_t35: turn on GPIO commands
2013-10-07 14:28 [U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
2013-10-07 14:28 ` [U-Boot] [PATCH 1/3] cm_t35: reduce default bootdelay to 3 seconds Nikita Kiryanov
@ 2013-10-07 14:28 ` Nikita Kiryanov
2013-11-04 14:18 ` [U-Boot] [U-Boot,2/3] " Tom Rini
2013-10-07 14:28 ` [U-Boot] [PATCH 3/3] cm_t35: update lcd predefines Nikita Kiryanov
` (2 subsequent siblings)
4 siblings, 1 reply; 9+ messages in thread
From: Nikita Kiryanov @ 2013-10-07 14:28 UTC (permalink / raw)
To: u-boot
Turn on GPIO commands for cm-t35 and cm-t3730.
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
---
include/configs/cm_t35.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index f74ccdc..eff35b9 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -23,6 +23,7 @@
#define CONFIG_OMAP /* in a TI OMAP core */
#define CONFIG_OMAP34XX /* which is a 34XX */
#define CONFIG_OMAP_GPIO
+#define CONFIG_CMD_GPIO
#define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */
#define CONFIG_OMAP_COMMON
--
1.8.1.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 3/3] cm_t35: update lcd predefines
2013-10-07 14:28 [U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
2013-10-07 14:28 ` [U-Boot] [PATCH 1/3] cm_t35: reduce default bootdelay to 3 seconds Nikita Kiryanov
2013-10-07 14:28 ` [U-Boot] [PATCH 2/3] cm_t35: turn on GPIO commands Nikita Kiryanov
@ 2013-10-07 14:28 ` Nikita Kiryanov
2013-10-07 15:55 ` [U-Boot] [PATCH V2 " Nikita Kiryanov
2013-10-28 13:57 ` [U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
4 siblings, 0 replies; 9+ messages in thread
From: Nikita Kiryanov @ 2013-10-07 14:28 UTC (permalink / raw)
To: u-boot
Current predefines do not fit cm-t3730 very well (some of them produce
artifacts in the image).
Update LCD predefines to accommodate both cm-t35 and cm-t3730 modules.
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
---
board/compulab/cm_t35/display.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/board/compulab/cm_t35/display.c b/board/compulab/cm_t35/display.c
index fae8d95..ead821e 100644
--- a/board/compulab/cm_t35/display.c
+++ b/board/compulab/cm_t35/display.c
@@ -51,6 +51,7 @@ static const struct panel_config preset_dvi_640X480 = {
.lcd_size = PANEL_LCD_SIZE(640, 480),
.timing_h = DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96),
.timing_v = DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
.divisor = 12 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
@@ -62,6 +63,7 @@ static const struct panel_config preset_dvi_800X600 = {
.lcd_size = PANEL_LCD_SIZE(800, 600),
.timing_h = DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128),
.timing_v = DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
.divisor = 8 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
@@ -73,6 +75,7 @@ static const struct panel_config preset_dvi_1024X768 = {
.lcd_size = PANEL_LCD_SIZE(1024, 768),
.timing_h = DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136),
.timing_v = DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
.divisor = 5 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
@@ -84,7 +87,8 @@ static const struct panel_config preset_dvi_1152X864 = {
.lcd_size = PANEL_LCD_SIZE(1152, 864),
.timing_h = DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128),
.timing_v = DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3),
- .divisor = 3 | (1 << 16),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
+ .divisor = 4 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
.load_mode = 2,
@@ -95,6 +99,7 @@ static const struct panel_config preset_dvi_1280X960 = {
.lcd_size = PANEL_LCD_SIZE(1280, 960),
.timing_h = DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112),
.timing_v = DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
.divisor = 3 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
@@ -106,6 +111,7 @@ static const struct panel_config preset_dvi_1280X1024 = {
.lcd_size = PANEL_LCD_SIZE(1280, 1024),
.timing_h = DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112),
.timing_v = DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
.divisor = 3 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
--
1.8.1.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH V2 3/3] cm_t35: update lcd predefines
2013-10-07 14:28 [U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
` (2 preceding siblings ...)
2013-10-07 14:28 ` [U-Boot] [PATCH 3/3] cm_t35: update lcd predefines Nikita Kiryanov
@ 2013-10-07 15:55 ` Nikita Kiryanov
2013-11-04 14:19 ` [U-Boot] [U-Boot,V2,3/3] " Tom Rini
2013-10-28 13:57 ` [U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
4 siblings, 1 reply; 9+ messages in thread
From: Nikita Kiryanov @ 2013-10-07 15:55 UTC (permalink / raw)
To: u-boot
Current predefines do not fit cm-t3730 very well (some of them produce
artifacts in the image).
Update LCD predefines to accommodate both cm-t35 and cm-t3730 modules.
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
---
Changes in V2:
- In V1 an old version of the patch was sent by mistake. This is the up
to date version. It depends on http://patchwork.ozlabs.org/patch/275283/
board/compulab/common/omap3_display.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/board/compulab/common/omap3_display.c b/board/compulab/common/omap3_display.c
index fae8d95..ead821e 100644
--- a/board/compulab/common/omap3_display.c
+++ b/board/compulab/common/omap3_display.c
@@ -51,6 +51,7 @@ static const struct panel_config preset_dvi_640X480 = {
.lcd_size = PANEL_LCD_SIZE(640, 480),
.timing_h = DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96),
.timing_v = DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
.divisor = 12 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
@@ -62,6 +63,7 @@ static const struct panel_config preset_dvi_800X600 = {
.lcd_size = PANEL_LCD_SIZE(800, 600),
.timing_h = DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128),
.timing_v = DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
.divisor = 8 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
@@ -73,6 +75,7 @@ static const struct panel_config preset_dvi_1024X768 = {
.lcd_size = PANEL_LCD_SIZE(1024, 768),
.timing_h = DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136),
.timing_v = DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
.divisor = 5 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
@@ -84,7 +87,8 @@ static const struct panel_config preset_dvi_1152X864 = {
.lcd_size = PANEL_LCD_SIZE(1152, 864),
.timing_h = DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128),
.timing_v = DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3),
- .divisor = 3 | (1 << 16),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
+ .divisor = 4 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
.load_mode = 2,
@@ -95,6 +99,7 @@ static const struct panel_config preset_dvi_1280X960 = {
.lcd_size = PANEL_LCD_SIZE(1280, 960),
.timing_h = DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112),
.timing_v = DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
.divisor = 3 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
@@ -106,6 +111,7 @@ static const struct panel_config preset_dvi_1280X1024 = {
.lcd_size = PANEL_LCD_SIZE(1280, 1024),
.timing_h = DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112),
.timing_v = DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3),
+ .pol_freq = DSS_IHS | DSS_IVS | DSS_IPC,
.divisor = 3 | (1 << 16),
.data_lines = LCD_INTERFACE_24_BIT,
.panel_type = ACTIVE_DISPLAY,
--
1.8.1.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 0/3] cm_t35 tune up
2013-10-07 14:28 [U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
` (3 preceding siblings ...)
2013-10-07 15:55 ` [U-Boot] [PATCH V2 " Nikita Kiryanov
@ 2013-10-28 13:57 ` Nikita Kiryanov
4 siblings, 0 replies; 9+ messages in thread
From: Nikita Kiryanov @ 2013-10-28 13:57 UTC (permalink / raw)
To: u-boot
Ping
On 10/07/2013 05:28 PM, Nikita Kiryanov wrote:
> This patchset is a collection of short cm_t35 updates. It changes some
> configuration parameters and turns on GPIO commands.
>
> Nikita Kiryanov (3):
> cm_t35: reduce default bootdelay to 3 seconds
> cm_t35: turn on GPIO commands
> cm_t35: update lcd predefines
>
> board/compulab/cm_t35/display.c | 8 +++++++-
> include/configs/cm_t35.h | 3 ++-
> 2 files changed, 9 insertions(+), 2 deletions(-)
>
--
Regards,
Nikita.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot, 1/3] cm_t35: reduce default bootdelay to 3 seconds
2013-10-07 14:28 ` [U-Boot] [PATCH 1/3] cm_t35: reduce default bootdelay to 3 seconds Nikita Kiryanov
@ 2013-11-04 14:18 ` Tom Rini
0 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2013-11-04 14:18 UTC (permalink / raw)
To: u-boot
On Mon, Oct 07, 2013 at 05:28:49PM +0300, Nikita Kiryanov wrote:
> Current default bootdelay of 10 seconds is too long.
> Reduce default bootdelay to 3 seconds.
>
> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131104/7f4cfdf6/attachment.pgp>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot,2/3] cm_t35: turn on GPIO commands
2013-10-07 14:28 ` [U-Boot] [PATCH 2/3] cm_t35: turn on GPIO commands Nikita Kiryanov
@ 2013-11-04 14:18 ` Tom Rini
0 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2013-11-04 14:18 UTC (permalink / raw)
To: u-boot
On Mon, Oct 07, 2013 at 05:28:50PM +0300, Nikita Kiryanov wrote:
> Turn on GPIO commands for cm-t35 and cm-t3730.
>
> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131104/9fc333fd/attachment.pgp>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot,V2,3/3] cm_t35: update lcd predefines
2013-10-07 15:55 ` [U-Boot] [PATCH V2 " Nikita Kiryanov
@ 2013-11-04 14:19 ` Tom Rini
0 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2013-11-04 14:19 UTC (permalink / raw)
To: u-boot
On Mon, Oct 07, 2013 at 06:55:46PM +0300, Nikita Kiryanov wrote:
> Current predefines do not fit cm-t3730 very well (some of them produce
> artifacts in the image).
> Update LCD predefines to accommodate both cm-t35 and cm-t3730 modules.
>
> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131104/9d272fe1/attachment.pgp>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-11-04 14:19 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-10-07 14:28 [U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
2013-10-07 14:28 ` [U-Boot] [PATCH 1/3] cm_t35: reduce default bootdelay to 3 seconds Nikita Kiryanov
2013-11-04 14:18 ` [U-Boot] [U-Boot, " Tom Rini
2013-10-07 14:28 ` [U-Boot] [PATCH 2/3] cm_t35: turn on GPIO commands Nikita Kiryanov
2013-11-04 14:18 ` [U-Boot] [U-Boot,2/3] " Tom Rini
2013-10-07 14:28 ` [U-Boot] [PATCH 3/3] cm_t35: update lcd predefines Nikita Kiryanov
2013-10-07 15:55 ` [U-Boot] [PATCH V2 " Nikita Kiryanov
2013-11-04 14:19 ` [U-Boot] [U-Boot,V2,3/3] " Tom Rini
2013-10-28 13:57 ` [U-Boot] [PATCH 0/3] cm_t35 tune up Nikita Kiryanov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.