linux-next: build failure after merge of the final tree

linux-next: build failure after merge of the final tree

[Stephen Rothwell]

Hi all,

After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:

drivers/video/udlfb.c: In function 'dlfb_compress_hline':
drivers/video/udlfb.c:421: error: implicit declaration of function 'prefetch_range'

Presumably caused by commit e66eed651fd1 ("list: remove prefetching from
regular list iterators").  We need to include preempt.h explictly, now.

I have included this patch for today:

From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Fri, 20 May 2011 16:29:01 +1000
Subject: [PATCH] udlfb: include prefetch.h explicitly

Commit e66eed651fd1 ("list: remove prefetching from
regular list iterators") removed the include of prefetch.h from list.h,
so we need to include it explicitly, now.

fixes this build error on powerpc:

drivers/video/udlfb.c: In function 'dlfb_compress_hline':
drivers/video/udlfb.c:421: error: implicit declaration of function 'prefetch_range'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 drivers/video/udlfb.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 68041d9..4c299cc 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -28,6 +28,7 @@
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/prefetch.h>
 #include <video/udlfb.h>
 #include "edid.h"
 
-- 
1.7.5.1

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

linux-next: build failure after merge of the final tree

[Stephen Rothwell]

Hi all,

After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:

drivers/video/udlfb.c: In function 'dlfb_compress_hline':
drivers/video/udlfb.c:421: error: implicit declaration of function 'prefetch_range'

Presumably caused by commit e66eed651fd1 ("list: remove prefetching from
regular list iterators").  We need to include preempt.h explictly, now.

I have included this patch for today:

From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Fri, 20 May 2011 16:29:01 +1000
Subject: [PATCH] udlfb: include prefetch.h explicitly

Commit e66eed651fd1 ("list: remove prefetching from
regular list iterators") removed the include of prefetch.h from list.h,
so we need to include it explicitly, now.

fixes this build error on powerpc:

drivers/video/udlfb.c: In function 'dlfb_compress_hline':
drivers/video/udlfb.c:421: error: implicit declaration of function 'prefetch_range'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 drivers/video/udlfb.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 68041d9..4c299cc 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -28,6 +28,7 @@
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/prefetch.h>
 #include <video/udlfb.h>
 #include "edid.h"
 
-- 
1.7.5.1

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

linux-next: build failure after merge of the final tree (fbdev tree related)

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 504 bytes --]

Hi all,

After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:

drivers/video/i740fb.c: In function 'i740fb_remove':
drivers/video/i740fb.c:1192:7: error: 'par' undeclared (first use in this function)

Caused by commit 5350c65f4f15 ("Resurrect Intel740 driver: i740fb") from
the fbdev tree.  CONFIG_MTRR is not defined for this build ...

I have reverted that commit for today.
-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

linux-next: build failure after merge of the final tree (fbdev tree related)

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 504 bytes --]

Hi all,

After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:

drivers/video/i740fb.c: In function 'i740fb_remove':
drivers/video/i740fb.c:1192:7: error: 'par' undeclared (first use in this function)

Caused by commit 5350c65f4f15 ("Resurrect Intel740 driver: i740fb") from
the fbdev tree.  CONFIG_MTRR is not defined for this build ...

I have reverted that commit for today.
-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

[PATCH] i740fb: fix compile error when CONFIG_MTRR is not selected

[Florian Tobias Schandinat]

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/i740fb.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/video/i740fb.c b/drivers/video/i740fb.c
index 8be0302..fe574d8 100644
--- a/drivers/video/i740fb.c
+++ b/drivers/video/i740fb.c
@@ -1179,9 +1179,9 @@ static void __devexit i740fb_remove(struct pci_dev *dev)
 	struct fb_info *info = pci_get_drvdata(dev);
 
 	if (info) {
-#ifdef CONFIG_MTRR
 		struct i740fb_par *par = info->par;
 
+#ifdef CONFIG_MTRR
 		if (par->mtrr_reg >= 0) {
 			mtrr_del(par->mtrr_reg, 0, 0);
 			par->mtrr_reg = -1;
-- 
1.7.2.5

Re: [PATCH] i740fb: fix compile error when CONFIG_MTRR is not selected

[Ondrej Zary]

On Sunday 19 February 2012 22:33:31 Florian Tobias Schandinat wrote:
> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
> ---
>  drivers/video/i740fb.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/video/i740fb.c b/drivers/video/i740fb.c
> index 8be0302..fe574d8 100644
> --- a/drivers/video/i740fb.c
> +++ b/drivers/video/i740fb.c
> @@ -1179,9 +1179,9 @@ static void __devexit i740fb_remove(struct pci_dev
> *dev) struct fb_info *info = pci_get_drvdata(dev);
>
>  	if (info) {
> -#ifdef CONFIG_MTRR
>  		struct i740fb_par *par = info->par;
>
> +#ifdef CONFIG_MTRR
>  		if (par->mtrr_reg >= 0) {
>  			mtrr_del(par->mtrr_reg, 0, 0);
>  			par->mtrr_reg = -1;

Thanks for fixing my stupid bug. I thought that I tested it without 
CONFIG_MTRR. But obviously didn't.

-- 
Ondrej Zary

Re: [PATCH] i740fb: fix compile error when CONFIG_MTRR is not selected

[Ondrej Zary]

On Sunday 19 February 2012 22:33:31 Florian Tobias Schandinat wrote:
> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
> ---
>  drivers/video/i740fb.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/video/i740fb.c b/drivers/video/i740fb.c
> index 8be0302..fe574d8 100644
> --- a/drivers/video/i740fb.c
> +++ b/drivers/video/i740fb.c
> @@ -1179,9 +1179,9 @@ static void __devexit i740fb_remove(struct pci_dev
> *dev) struct fb_info *info = pci_get_drvdata(dev);
>
>  	if (info) {
> -#ifdef CONFIG_MTRR
>  		struct i740fb_par *par = info->par;
>
> +#ifdef CONFIG_MTRR
>  		if (par->mtrr_reg >= 0) {
>  			mtrr_del(par->mtrr_reg, 0, 0);
>  			par->mtrr_reg = -1;

Thanks for fixing my stupid bug. I thought that I tested it without 
CONFIG_MTRR. But obviously didn't.

-- 
Ondrej Zary

linux-next: build failure after merge of the final tree (fbdev tree related)

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 1702 bytes --]

Hi all,

After merging the final tree, today's linux-next build (powerpc
ppc44x_defconfig) failed like this:

drivers/video/xilinxfb.c: In function 'xilinxfb_of_probe':
drivers/video/xilinxfb.c:431:30: error: 'op' undeclared (first use in this function)

Caused by commit 353846fb8bb7 ("video: xilinxfb: Use standard variable
name convention") from the fbdev tree.

I have applied the following fix patch for today:

From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 29 Oct 2013 01:18:22 +1100
Subject: [PATCH] video: xilinxfb: Fix for "Use standard variable name convention"

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 drivers/video/xilinxfb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 9eedf9673b7f..6ff1a91e9dfd 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -428,11 +428,11 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
 #ifdef CONFIG_PPC_DCR
 	else {
 		int start;
-		start = dcr_resource_start(op->dev.of_node, 0);
-		drvdata->dcr_len = dcr_resource_len(op->dev.of_node, 0);
-		drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
+		start = dcr_resource_start(pdev->dev.of_node, 0);
+		drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0);
+		drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len);
 		if (!DCR_MAP_OK(drvdata->dcr_host)) {
-			dev_err(&op->dev, "invalid DCR address\n");
+			dev_err(&pdev->dev, "invalid DCR address\n");
 			return -ENODEV;
 		}
 	}
-- 
1.8.4.rc3

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

linux-next: build failure after merge of the final tree (fbdev tree related)

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 1702 bytes --]

Hi all,

After merging the final tree, today's linux-next build (powerpc
ppc44x_defconfig) failed like this:

drivers/video/xilinxfb.c: In function 'xilinxfb_of_probe':
drivers/video/xilinxfb.c:431:30: error: 'op' undeclared (first use in this function)

Caused by commit 353846fb8bb7 ("video: xilinxfb: Use standard variable
name convention") from the fbdev tree.

I have applied the following fix patch for today:

From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 29 Oct 2013 01:18:22 +1100
Subject: [PATCH] video: xilinxfb: Fix for "Use standard variable name convention"

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
 drivers/video/xilinxfb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 9eedf9673b7f..6ff1a91e9dfd 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -428,11 +428,11 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
 #ifdef CONFIG_PPC_DCR
 	else {
 		int start;
-		start = dcr_resource_start(op->dev.of_node, 0);
-		drvdata->dcr_len = dcr_resource_len(op->dev.of_node, 0);
-		drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
+		start = dcr_resource_start(pdev->dev.of_node, 0);
+		drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0);
+		drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len);
 		if (!DCR_MAP_OK(drvdata->dcr_host)) {
-			dev_err(&op->dev, "invalid DCR address\n");
+			dev_err(&pdev->dev, "invalid DCR address\n");
 			return -ENODEV;
 		}
 	}
-- 
1.8.4.rc3

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

Re: linux-next: build failure after merge of the final tree (fbdev tree related)

[Michal Simek]

[-- Attachment #1: Type: text/plain, Size: 2148 bytes --]

On 10/28/2013 03:23 PM, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the final tree, today's linux-next build (powerpc
> ppc44x_defconfig) failed like this:
> 
> drivers/video/xilinxfb.c: In function 'xilinxfb_of_probe':
> drivers/video/xilinxfb.c:431:30: error: 'op' undeclared (first use in this function)
> 
> Caused by commit 353846fb8bb7 ("video: xilinxfb: Use standard variable
> name convention") from the fbdev tree.
> 
> I have applied the following fix patch for today:
> 
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Tue, 29 Oct 2013 01:18:22 +1100
> Subject: [PATCH] video: xilinxfb: Fix for "Use standard variable name convention"
> 
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
>  drivers/video/xilinxfb.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
> index 9eedf9673b7f..6ff1a91e9dfd 100644
> --- a/drivers/video/xilinxfb.c
> +++ b/drivers/video/xilinxfb.c
> @@ -428,11 +428,11 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
>  #ifdef CONFIG_PPC_DCR
>  	else {
>  		int start;
> -		start = dcr_resource_start(op->dev.of_node, 0);
> -		drvdata->dcr_len = dcr_resource_len(op->dev.of_node, 0);
> -		drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
> +		start = dcr_resource_start(pdev->dev.of_node, 0);
> +		drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0);
> +		drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len);
>  		if (!DCR_MAP_OK(drvdata->dcr_host)) {
> -			dev_err(&op->dev, "invalid DCR address\n");
> +			dev_err(&pdev->dev, "invalid DCR address\n");
>  			return -ENODEV;
>  		}
>  	}
> 

Your fix is correct.

Tested-by: Michal Simek <monstr@monstr.eu>

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]

Re: linux-next: build failure after merge of the final tree (fbdev tree related)

[Michal Simek]

[-- Attachment #1: Type: text/plain, Size: 2148 bytes --]

On 10/28/2013 03:23 PM, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the final tree, today's linux-next build (powerpc
> ppc44x_defconfig) failed like this:
> 
> drivers/video/xilinxfb.c: In function 'xilinxfb_of_probe':
> drivers/video/xilinxfb.c:431:30: error: 'op' undeclared (first use in this function)
> 
> Caused by commit 353846fb8bb7 ("video: xilinxfb: Use standard variable
> name convention") from the fbdev tree.
> 
> I have applied the following fix patch for today:
> 
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Tue, 29 Oct 2013 01:18:22 +1100
> Subject: [PATCH] video: xilinxfb: Fix for "Use standard variable name convention"
> 
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
>  drivers/video/xilinxfb.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
> index 9eedf9673b7f..6ff1a91e9dfd 100644
> --- a/drivers/video/xilinxfb.c
> +++ b/drivers/video/xilinxfb.c
> @@ -428,11 +428,11 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
>  #ifdef CONFIG_PPC_DCR
>  	else {
>  		int start;
> -		start = dcr_resource_start(op->dev.of_node, 0);
> -		drvdata->dcr_len = dcr_resource_len(op->dev.of_node, 0);
> -		drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
> +		start = dcr_resource_start(pdev->dev.of_node, 0);
> +		drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0);
> +		drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len);
>  		if (!DCR_MAP_OK(drvdata->dcr_host)) {
> -			dev_err(&op->dev, "invalid DCR address\n");
> +			dev_err(&pdev->dev, "invalid DCR address\n");
>  			return -ENODEV;
>  		}
>  	}
> 

Your fix is correct.

Tested-by: Michal Simek <monstr@monstr.eu>

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]

Re: linux-next: build failure after merge of the final tree (fbdev tree related)

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 1807 bytes --]

On 28/10/13 16:23, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the final tree, today's linux-next build (powerpc
> ppc44x_defconfig) failed like this:
> 
> drivers/video/xilinxfb.c: In function 'xilinxfb_of_probe':
> drivers/video/xilinxfb.c:431:30: error: 'op' undeclared (first use in this function)
> 
> Caused by commit 353846fb8bb7 ("video: xilinxfb: Use standard variable
> name convention") from the fbdev tree.
> 
> I have applied the following fix patch for today:
> 
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Tue, 29 Oct 2013 01:18:22 +1100
> Subject: [PATCH] video: xilinxfb: Fix for "Use standard variable name convention"
> 
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
>  drivers/video/xilinxfb.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
> index 9eedf9673b7f..6ff1a91e9dfd 100644
> --- a/drivers/video/xilinxfb.c
> +++ b/drivers/video/xilinxfb.c
> @@ -428,11 +428,11 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
>  #ifdef CONFIG_PPC_DCR
>  	else {
>  		int start;
> -		start = dcr_resource_start(op->dev.of_node, 0);
> -		drvdata->dcr_len = dcr_resource_len(op->dev.of_node, 0);
> -		drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
> +		start = dcr_resource_start(pdev->dev.of_node, 0);
> +		drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0);
> +		drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len);
>  		if (!DCR_MAP_OK(drvdata->dcr_host)) {
> -			dev_err(&op->dev, "invalid DCR address\n");
> +			dev_err(&pdev->dev, "invalid DCR address\n");
>  			return -ENODEV;
>  		}
>  	}
> 

Thanks, I have applied this to the fbdev tree.

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

Re: linux-next: build failure after merge of the final tree (fbdev tree related)

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 1807 bytes --]

On 28/10/13 16:23, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the final tree, today's linux-next build (powerpc
> ppc44x_defconfig) failed like this:
> 
> drivers/video/xilinxfb.c: In function 'xilinxfb_of_probe':
> drivers/video/xilinxfb.c:431:30: error: 'op' undeclared (first use in this function)
> 
> Caused by commit 353846fb8bb7 ("video: xilinxfb: Use standard variable
> name convention") from the fbdev tree.
> 
> I have applied the following fix patch for today:
> 
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Tue, 29 Oct 2013 01:18:22 +1100
> Subject: [PATCH] video: xilinxfb: Fix for "Use standard variable name convention"
> 
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
>  drivers/video/xilinxfb.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
> index 9eedf9673b7f..6ff1a91e9dfd 100644
> --- a/drivers/video/xilinxfb.c
> +++ b/drivers/video/xilinxfb.c
> @@ -428,11 +428,11 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
>  #ifdef CONFIG_PPC_DCR
>  	else {
>  		int start;
> -		start = dcr_resource_start(op->dev.of_node, 0);
> -		drvdata->dcr_len = dcr_resource_len(op->dev.of_node, 0);
> -		drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
> +		start = dcr_resource_start(pdev->dev.of_node, 0);
> +		drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0);
> +		drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len);
>  		if (!DCR_MAP_OK(drvdata->dcr_host)) {
> -			dev_err(&op->dev, "invalid DCR address\n");
> +			dev_err(&pdev->dev, "invalid DCR address\n");
>  			return -ENODEV;
>  		}
>  	}
> 

Thanks, I have applied this to the fbdev tree.

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

Re: linux-next: build failure after merge of the final tree (fbdev tree related)

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 1807 bytes --]

On 28/10/13 16:23, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the final tree, today's linux-next build (powerpc
> ppc44x_defconfig) failed like this:
> 
> drivers/video/xilinxfb.c: In function 'xilinxfb_of_probe':
> drivers/video/xilinxfb.c:431:30: error: 'op' undeclared (first use in this function)
> 
> Caused by commit 353846fb8bb7 ("video: xilinxfb: Use standard variable
> name convention") from the fbdev tree.
> 
> I have applied the following fix patch for today:
> 
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Tue, 29 Oct 2013 01:18:22 +1100
> Subject: [PATCH] video: xilinxfb: Fix for "Use standard variable name convention"
> 
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
>  drivers/video/xilinxfb.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
> index 9eedf9673b7f..6ff1a91e9dfd 100644
> --- a/drivers/video/xilinxfb.c
> +++ b/drivers/video/xilinxfb.c
> @@ -428,11 +428,11 @@ static int xilinxfb_of_probe(struct platform_device *pdev)
>  #ifdef CONFIG_PPC_DCR
>  	else {
>  		int start;
> -		start = dcr_resource_start(op->dev.of_node, 0);
> -		drvdata->dcr_len = dcr_resource_len(op->dev.of_node, 0);
> -		drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
> +		start = dcr_resource_start(pdev->dev.of_node, 0);
> +		drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0);
> +		drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len);
>  		if (!DCR_MAP_OK(drvdata->dcr_host)) {
> -			dev_err(&op->dev, "invalid DCR address\n");
> +			dev_err(&pdev->dev, "invalid DCR address\n");
>  			return -ENODEV;
>  		}
>  	}
> 

Thanks, I have applied this to the fbdev tree.

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

Re: linux-next: build failure after merge of the final tree (fbdev tree related)

[Paul Mundt]

On Wed, Apr 20, 2011 at 02:11:58PM +1000, Stephen Rothwell wrote:
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
> 
> drivers/video/s3fb.c: In function 's3_pci_remove':
> drivers/video/s3fb.c:1388: error: 'par' undeclared (first use in this function)
> 
> Caused by commit 86c0f043a737 ("s3fb: add DDC support").  Clearly not
> tested with CONFIG_MTRR not set :-(
> 
> I have reverted that commit for today.

I thought I had MTRR off in my test build, but it seems not.

Fixed now, thanks for the report!

linux-next: build failure after merge of the final tree (fbdev tree related)

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 504 bytes --]

Hi Paul,

After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:

drivers/video/s3fb.c: In function 's3_pci_remove':
drivers/video/s3fb.c:1388: error: 'par' undeclared (first use in this function)

Caused by commit 86c0f043a737 ("s3fb: add DDC support").  Clearly not
tested with CONFIG_MTRR not set :-(

I have reverted that commit for today.
-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]