[PATCH 1/3] power: clock_ops.c: fixup clk prepare/unprepare count

[PATCH 1/3] power: clock_ops.c: fixup clk prepare/unprepare count

[Ben Dooks]

The drivers/base/power/clock_ops.c file is causing warnings from
the clock driver (as shown below) due to failing to do a clk_prepare()
call before enabling a clock. It also fails to check the balance of
prepare/unprepare as __pm_clk_remove() do clk_disable_unprepare() call.

This bug has probably been in since commit b2476490e ("clk: introduce
the common clock framework") as the warning was part of the original
commit. It is strange that it has not been noticed (although this has
also been coupled with a failure for certain SH builds to not build the
necessary glue to use this method of controlling the clocks).

In summary, this is probably needed in several stable branches but need
advice on which ones.

On the Renesas Lager board, this causes numerous warnings of the following
and even worse the clock system will not enable clocks, causing drivers
that are in development to fail to work:

WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883 __clk_enable+0x2c/0xa0()

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
---
 drivers/base/power/clock_ops.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 9d8fde7..b9dd8fa 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -43,6 +43,7 @@ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
 	if (IS_ERR(ce->clk)) {
 		ce->status = PCE_STATUS_ERROR;
 	} else {
+		clk_prepare(ce->clk);
 		ce->status = PCE_STATUS_ACQUIRED;
 		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
 	}
@@ -99,10 +100,12 @@ static void __pm_clk_remove(struct pm_clock_entry *ce)
 
 	if (ce->status < PCE_STATUS_ERROR) {
 		if (ce->status = PCE_STATUS_ENABLED)
-			clk_disable_unprepare(ce->clk);
+			clk_disable(ce->clk);
 
-		if (ce->status >= PCE_STATUS_ACQUIRED)
+		if (ce->status >= PCE_STATUS_ACQUIRED) {
+			clk_unprepare(ce->clk);
 			clk_put(ce->clk);
+		}
 	}
 
 	kfree(ce->con_id);
-- 
1.8.5.2

[PATCH 1/3] power: clock_ops.c: fixup clk prepare/unprepare count

[Ben Dooks]

The drivers/base/power/clock_ops.c file is causing warnings from
the clock driver (as shown below) due to failing to do a clk_prepare()
call before enabling a clock. It also fails to check the balance of
prepare/unprepare as __pm_clk_remove() do clk_disable_unprepare() call.

This bug has probably been in since commit b2476490e ("clk: introduce
the common clock framework") as the warning was part of the original
commit. It is strange that it has not been noticed (although this has
also been coupled with a failure for certain SH builds to not build the
necessary glue to use this method of controlling the clocks).

In summary, this is probably needed in several stable branches but need
advice on which ones.

On the Renesas Lager board, this causes numerous warnings of the following
and even worse the clock system will not enable clocks, causing drivers
that are in development to fail to work:

WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883 __clk_enable+0x2c/0xa0()

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
---
 drivers/base/power/clock_ops.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 9d8fde7..b9dd8fa 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -43,6 +43,7 @@ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
 	if (IS_ERR(ce->clk)) {
 		ce->status = PCE_STATUS_ERROR;
 	} else {
+		clk_prepare(ce->clk);
 		ce->status = PCE_STATUS_ACQUIRED;
 		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
 	}
@@ -99,10 +100,12 @@ static void __pm_clk_remove(struct pm_clock_entry *ce)
 
 	if (ce->status < PCE_STATUS_ERROR) {
 		if (ce->status == PCE_STATUS_ENABLED)
-			clk_disable_unprepare(ce->clk);
+			clk_disable(ce->clk);
 
-		if (ce->status >= PCE_STATUS_ACQUIRED)
+		if (ce->status >= PCE_STATUS_ACQUIRED) {
+			clk_unprepare(ce->clk);
 			clk_put(ce->clk);
+		}
 	}
 
 	kfree(ce->con_id);
-- 
1.8.5.2

[PATCH 2/3] power: clock_ops.c: check return of clk_enable() in pm_clk_resume()

[Ben Dooks]

The clk_enable() call in the pm_clk_resume() call returns an error
that is not being checked. If clk_enable() fails then we should
not set the state of the clock to PCE_STATUS_ENABLED.

Note, the issue of warning the user if this fails has not been
addressed in this patch as this is not the only place the driver
calls clk_enable().

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
---
 drivers/base/power/clock_ops.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index b9dd8fa..9bb95ab 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -252,6 +252,7 @@ int pm_clk_resume(struct device *dev)
 	struct pm_subsys_data *psd = dev_to_psd(dev);
 	struct pm_clock_entry *ce;
 	unsigned long flags;
+	int ret;
 
 	dev_dbg(dev, "%s()\n", __func__);
 
@@ -262,8 +263,9 @@ int pm_clk_resume(struct device *dev)
 
 	list_for_each_entry(ce, &psd->clock_list, node) {
 		if (ce->status < PCE_STATUS_ERROR) {
-			clk_enable(ce->clk);
-			ce->status = PCE_STATUS_ENABLED;
+			ret = clk_enable(ce->clk);
+			if (ret = 0)
+				ce->status = PCE_STATUS_ENABLED;
 		}
 	}
 
-- 
1.8.5.2

[PATCH 2/3] power: clock_ops.c: check return of clk_enable() in pm_clk_resume()

[Ben Dooks]

The clk_enable() call in the pm_clk_resume() call returns an error
that is not being checked. If clk_enable() fails then we should
not set the state of the clock to PCE_STATUS_ENABLED.

Note, the issue of warning the user if this fails has not been
addressed in this patch as this is not the only place the driver
calls clk_enable().

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
---
 drivers/base/power/clock_ops.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index b9dd8fa..9bb95ab 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -252,6 +252,7 @@ int pm_clk_resume(struct device *dev)
 	struct pm_subsys_data *psd = dev_to_psd(dev);
 	struct pm_clock_entry *ce;
 	unsigned long flags;
+	int ret;
 
 	dev_dbg(dev, "%s()\n", __func__);
 
@@ -262,8 +263,9 @@ int pm_clk_resume(struct device *dev)
 
 	list_for_each_entry(ce, &psd->clock_list, node) {
 		if (ce->status < PCE_STATUS_ERROR) {
-			clk_enable(ce->clk);
-			ce->status = PCE_STATUS_ENABLED;
+			ret = clk_enable(ce->clk);
+			if (ret == 0)
+				ce->status = PCE_STATUS_ENABLED;
 		}
 	}
 
-- 
1.8.5.2

[PATCH 3/3] power: clock_ops.c: report clock errors from clk_enable()

[Ben Dooks]

If clk_enable() fails, then print a message so that the user can see
what is happening instead of silently failing to enable the clock.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
---
 drivers/base/power/clock_ops.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 9bb95ab..b94b3ec 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -33,6 +33,21 @@ struct pm_clock_entry {
 };
 
 /**
+ * pm_clk_enable - Enable a clock, reporting any errors
+ * @dev: The device for the given clock
+ * @clk: The clock being enabled.
+ */
+static inline int __pm_clk_enable(struct device *dev, struct clk *clk)
+{
+	int ret = clk_enable(clk);
+	if (ret != 0)
+		dev_err(dev, "%s: failed to enable clk %p, error %d\n",
+			__func__, clk, ret);
+
+	return ret;
+}
+
+/**
  * pm_clk_acquire - Acquire a device clock.
  * @dev: Device whose clock is to be acquired.
  * @ce: PM clock entry corresponding to the clock.
@@ -263,7 +278,7 @@ int pm_clk_resume(struct device *dev)
 
 	list_for_each_entry(ce, &psd->clock_list, node) {
 		if (ce->status < PCE_STATUS_ERROR) {
-			ret = clk_enable(ce->clk);
+			ret = __pm_clk_enable(dev, ce->clk);
 			if (ret = 0)
 				ce->status = PCE_STATUS_ENABLED;
 		}
@@ -381,7 +396,7 @@ int pm_clk_resume(struct device *dev)
 	spin_lock_irqsave(&psd->lock, flags);
 
 	list_for_each_entry(ce, &psd->clock_list, node)
-		clk_enable(ce->clk);
+		__pm_clk_enable(dev, ce->clk);
 
 	spin_unlock_irqrestore(&psd->lock, flags);
 
-- 
1.8.5.2

[PATCH 3/3] power: clock_ops.c: report clock errors from clk_enable()

[Ben Dooks]

If clk_enable() fails, then print a message so that the user can see
what is happening instead of silently failing to enable the clock.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
---
 drivers/base/power/clock_ops.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 9bb95ab..b94b3ec 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -33,6 +33,21 @@ struct pm_clock_entry {
 };
 
 /**
+ * pm_clk_enable - Enable a clock, reporting any errors
+ * @dev: The device for the given clock
+ * @clk: The clock being enabled.
+ */
+static inline int __pm_clk_enable(struct device *dev, struct clk *clk)
+{
+	int ret = clk_enable(clk);
+	if (ret != 0)
+		dev_err(dev, "%s: failed to enable clk %p, error %d\n",
+			__func__, clk, ret);
+
+	return ret;
+}
+
+/**
  * pm_clk_acquire - Acquire a device clock.
  * @dev: Device whose clock is to be acquired.
  * @ce: PM clock entry corresponding to the clock.
@@ -263,7 +278,7 @@ int pm_clk_resume(struct device *dev)
 
 	list_for_each_entry(ce, &psd->clock_list, node) {
 		if (ce->status < PCE_STATUS_ERROR) {
-			ret = clk_enable(ce->clk);
+			ret = __pm_clk_enable(dev, ce->clk);
 			if (ret == 0)
 				ce->status = PCE_STATUS_ENABLED;
 		}
@@ -381,7 +396,7 @@ int pm_clk_resume(struct device *dev)
 	spin_lock_irqsave(&psd->lock, flags);
 
 	list_for_each_entry(ce, &psd->clock_list, node)
-		clk_enable(ce->clk);
+		__pm_clk_enable(dev, ce->clk);
 
 	spin_unlock_irqrestore(&psd->lock, flags);
 
-- 
1.8.5.2

Re: [PATCH 1/3] power: clock_ops.c: fixup clk prepare/unprepare count

[Laurent Pinchart]

Hi Ben,

Thank you for the patch.

On Saturday 11 January 2014 13:05:38 Ben Dooks wrote:
> The drivers/base/power/clock_ops.c file is causing warnings from
> the clock driver (as shown below) due to failing to do a clk_prepare()
> call before enabling a clock. It also fails to check the balance of
> prepare/unprepare as __pm_clk_remove() do clk_disable_unprepare() call.
> 
> This bug has probably been in since commit b2476490e ("clk: introduce
> the common clock framework") as the warning was part of the original
> commit. It is strange that it has not been noticed (although this has
> also been coupled with a failure for certain SH builds to not build the
> necessary glue to use this method of controlling the clocks).
>
> In summary, this is probably needed in several stable branches but need
> advice on which ones.
> 
> On the Renesas Lager board, this causes numerous warnings of the following
> and even worse the clock system will not enable clocks, causing drivers
> that are in development to fail to work:
> 
> WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883 __clk_enable+0x2c/0xa0()

I've never noticed this on Lager, probably because Lager multiplatform doesn't 
make use of clock_ops.c as drivers/sh/pm_runtime.c (which you addressed in 
another patch that I've also replied to). I'm thus not sure we need to apply 
this as a fix and backport it to stable branches.

> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-sh@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
> ---
>  drivers/base/power/clock_ops.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
> index 9d8fde7..b9dd8fa 100644
> --- a/drivers/base/power/clock_ops.c
> +++ b/drivers/base/power/clock_ops.c
> @@ -43,6 +43,7 @@ static void pm_clk_acquire(struct device *dev, struct
> pm_clock_entry *ce) if (IS_ERR(ce->clk)) {
>  		ce->status = PCE_STATUS_ERROR;
>  	} else {
> +		clk_prepare(ce->clk);
>  		ce->status = PCE_STATUS_ACQUIRED;
>  		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
>  	}
> @@ -99,10 +100,12 @@ static void __pm_clk_remove(struct pm_clock_entry *ce)
> 
>  	if (ce->status < PCE_STATUS_ERROR) {
>  		if (ce->status = PCE_STATUS_ENABLED)
> -			clk_disable_unprepare(ce->clk);
> +			clk_disable(ce->clk);
> 
> -		if (ce->status >= PCE_STATUS_ACQUIRED)
> +		if (ce->status >= PCE_STATUS_ACQUIRED) {
> +			clk_unprepare(ce->clk);
>  			clk_put(ce->clk);
> +		}
>  	}
> 
>  	kfree(ce->con_id);
-- 
Regards,

Laurent Pinchart

Re: [PATCH 1/3] power: clock_ops.c: fixup clk prepare/unprepare count

[Laurent Pinchart]

Hi Ben,

Thank you for the patch.

On Saturday 11 January 2014 13:05:38 Ben Dooks wrote:
> The drivers/base/power/clock_ops.c file is causing warnings from
> the clock driver (as shown below) due to failing to do a clk_prepare()
> call before enabling a clock. It also fails to check the balance of
> prepare/unprepare as __pm_clk_remove() do clk_disable_unprepare() call.
> 
> This bug has probably been in since commit b2476490e ("clk: introduce
> the common clock framework") as the warning was part of the original
> commit. It is strange that it has not been noticed (although this has
> also been coupled with a failure for certain SH builds to not build the
> necessary glue to use this method of controlling the clocks).
>
> In summary, this is probably needed in several stable branches but need
> advice on which ones.
> 
> On the Renesas Lager board, this causes numerous warnings of the following
> and even worse the clock system will not enable clocks, causing drivers
> that are in development to fail to work:
> 
> WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883 __clk_enable+0x2c/0xa0()

I've never noticed this on Lager, probably because Lager multiplatform doesn't 
make use of clock_ops.c as drivers/sh/pm_runtime.c (which you addressed in 
another patch that I've also replied to). I'm thus not sure we need to apply 
this as a fix and backport it to stable branches.

> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-sh@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
> ---
>  drivers/base/power/clock_ops.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
> index 9d8fde7..b9dd8fa 100644
> --- a/drivers/base/power/clock_ops.c
> +++ b/drivers/base/power/clock_ops.c
> @@ -43,6 +43,7 @@ static void pm_clk_acquire(struct device *dev, struct
> pm_clock_entry *ce) if (IS_ERR(ce->clk)) {
>  		ce->status = PCE_STATUS_ERROR;
>  	} else {
> +		clk_prepare(ce->clk);
>  		ce->status = PCE_STATUS_ACQUIRED;
>  		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
>  	}
> @@ -99,10 +100,12 @@ static void __pm_clk_remove(struct pm_clock_entry *ce)
> 
>  	if (ce->status < PCE_STATUS_ERROR) {
>  		if (ce->status == PCE_STATUS_ENABLED)
> -			clk_disable_unprepare(ce->clk);
> +			clk_disable(ce->clk);
> 
> -		if (ce->status >= PCE_STATUS_ACQUIRED)
> +		if (ce->status >= PCE_STATUS_ACQUIRED) {
> +			clk_unprepare(ce->clk);
>  			clk_put(ce->clk);
> +		}
>  	}
> 
>  	kfree(ce->con_id);
-- 
Regards,

Laurent Pinchart

Re: [PATCH 1/3] power: clock_ops.c: fixup clk prepare/unprepare count

[Ben Dooks]

On 12/01/14 22:04, Laurent Pinchart wrote:
> Hi Ben,
>
> Thank you for the patch.
>
> On Saturday 11 January 2014 13:05:38 Ben Dooks wrote:
>> The drivers/base/power/clock_ops.c file is causing warnings from
>> the clock driver (as shown below) due to failing to do a clk_prepare()
>> call before enabling a clock. It also fails to check the balance of
>> prepare/unprepare as __pm_clk_remove() do clk_disable_unprepare() call.
>>
>> This bug has probably been in since commit b2476490e ("clk: introduce
>> the common clock framework") as the warning was part of the original
>> commit. It is strange that it has not been noticed (although this has
>> also been coupled with a failure for certain SH builds to not build the
>> necessary glue to use this method of controlling the clocks).
>>
>> In summary, this is probably needed in several stable branches but need
>> advice on which ones.
>>
>> On the Renesas Lager board, this causes numerous warnings of the following
>> and even worse the clock system will not enable clocks, causing drivers
>> that are in development to fail to work:
>>
>> WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883 __clk_enable+0x2c/0xa0()
>
> I've never noticed this on Lager, probably because Lager multiplatform doesn't
> make use of clock_ops.c as drivers/sh/pm_runtime.c (which you addressed in
> another patch that I've also replied to). I'm thus not sure we need to apply
> this as a fix and backport it to stable branches.

Yes, it seems that a lot of the lager drivers assume that this support
is there, and the work seems to have been sponsored by Renesas.

I think there must be people still building the old style of kernel
as there is still work going on for board-lager.c which leads me to
being a bit surprised that no-one had noticed this (as it isn't as
if it produces a pile of warnings on the console output).

-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

Re: [PATCH 1/3] power: clock_ops.c: fixup clk prepare/unprepare count

[Geert Uytterhoeven]

On Mon, Jan 13, 2014 at 7:28 AM, Ben Dooks <ben.dooks@codethink.co.uk> wrote:
>> I've never noticed this on Lager, probably because Lager multiplatform
>> doesn't
>> make use of clock_ops.c as drivers/sh/pm_runtime.c (which you addressed in
>> another patch that I've also replied to). I'm thus not sure we need to
>> apply
>> this as a fix and backport it to stable branches.
>
>
> Yes, it seems that a lot of the lager drivers assume that this support
> is there, and the work seems to have been sponsored by Renesas.

I can confirm that applying both this and "[PATCH] ARM: shmobile: compile
drivers/sh for CONFIG_ARCH_SHMOBILE_MULTI" makes

    rcar_thermal e61f0000.thermal: thermal sensor was broken

go away on Koelsch.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 1/3] power: clock_ops.c: fixup clk prepare/unprepare count

[Geert Uytterhoeven]

On Mon, Jan 13, 2014 at 7:28 AM, Ben Dooks <ben.dooks@codethink.co.uk> wrote:
>> I've never noticed this on Lager, probably because Lager multiplatform
>> doesn't
>> make use of clock_ops.c as drivers/sh/pm_runtime.c (which you addressed in
>> another patch that I've also replied to). I'm thus not sure we need to
>> apply
>> this as a fix and backport it to stable branches.
>
>
> Yes, it seems that a lot of the lager drivers assume that this support
> is there, and the work seems to have been sponsored by Renesas.

I can confirm that applying both this and "[PATCH] ARM: shmobile: compile
drivers/sh for CONFIG_ARCH_SHMOBILE_MULTI" makes

    rcar_thermal e61f0000.thermal: thermal sensor was broken

go away on Koelsch.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 1/3] power: clock_ops.c: fixup clk prepare/unprepare count

[Ben Dooks]

On 13/01/14 08:50, Geert Uytterhoeven wrote:
> On Mon, Jan 13, 2014 at 7:28 AM, Ben Dooks <ben.dooks@codethink.co.uk> wrote:
>>> I've never noticed this on Lager, probably because Lager multiplatform
>>> doesn't
>>> make use of clock_ops.c as drivers/sh/pm_runtime.c (which you addressed in
>>> another patch that I've also replied to). I'm thus not sure we need to
>>> apply
>>> this as a fix and backport it to stable branches.
>>
>>
>> Yes, it seems that a lot of the lager drivers assume that this support
>> is there, and the work seems to have been sponsored by Renesas.
>
> I can confirm that applying both this and "[PATCH] ARM: shmobile: compile
> drivers/sh for CONFIG_ARCH_SHMOBILE_MULTI" makes

Thanks. Wonder how long this has been broken for?


-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

Re: [PATCH 2/3] power: clock_ops.c: check return of clk_enable() in pm_clk_resume()

[Rafael J. Wysocki]

On Saturday, January 11, 2014 01:05:39 PM Ben Dooks wrote:
> The clk_enable() call in the pm_clk_resume() call returns an error
> that is not being checked. If clk_enable() fails then we should
> not set the state of the clock to PCE_STATUS_ENABLED.
> 
> Note, the issue of warning the user if this fails has not been
> addressed in this patch as this is not the only place the driver
> calls clk_enable().
> 
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-sh@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
> ---
>  drivers/base/power/clock_ops.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
> index b9dd8fa..9bb95ab 100644
> --- a/drivers/base/power/clock_ops.c
> +++ b/drivers/base/power/clock_ops.c
> @@ -252,6 +252,7 @@ int pm_clk_resume(struct device *dev)
>  	struct pm_subsys_data *psd = dev_to_psd(dev);
>  	struct pm_clock_entry *ce;
>  	unsigned long flags;
> +	int ret;
>  
>  	dev_dbg(dev, "%s()\n", __func__);
>  
> @@ -262,8 +263,9 @@ int pm_clk_resume(struct device *dev)
>  
>  	list_for_each_entry(ce, &psd->clock_list, node) {
>  		if (ce->status < PCE_STATUS_ERROR) {
> -			clk_enable(ce->clk);
> -			ce->status = PCE_STATUS_ENABLED;
> +			ret = clk_enable(ce->clk);
> +			if (ret = 0)

Can you please use if (!ret) here?

And analogously in patch [3/3]?

> +				ce->status = PCE_STATUS_ENABLED;
>  		}
>  	}
>  
> 

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 2/3] power: clock_ops.c: check return of clk_enable() in pm_clk_resume()

[Rafael J. Wysocki]

On Saturday, January 11, 2014 01:05:39 PM Ben Dooks wrote:
> The clk_enable() call in the pm_clk_resume() call returns an error
> that is not being checked. If clk_enable() fails then we should
> not set the state of the clock to PCE_STATUS_ENABLED.
> 
> Note, the issue of warning the user if this fails has not been
> addressed in this patch as this is not the only place the driver
> calls clk_enable().
> 
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-sh@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
> ---
>  drivers/base/power/clock_ops.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
> index b9dd8fa..9bb95ab 100644
> --- a/drivers/base/power/clock_ops.c
> +++ b/drivers/base/power/clock_ops.c
> @@ -252,6 +252,7 @@ int pm_clk_resume(struct device *dev)
>  	struct pm_subsys_data *psd = dev_to_psd(dev);
>  	struct pm_clock_entry *ce;
>  	unsigned long flags;
> +	int ret;
>  
>  	dev_dbg(dev, "%s()\n", __func__);
>  
> @@ -262,8 +263,9 @@ int pm_clk_resume(struct device *dev)
>  
>  	list_for_each_entry(ce, &psd->clock_list, node) {
>  		if (ce->status < PCE_STATUS_ERROR) {
> -			clk_enable(ce->clk);
> -			ce->status = PCE_STATUS_ENABLED;
> +			ret = clk_enable(ce->clk);
> +			if (ret == 0)

Can you please use if (!ret) here?

And analogously in patch [3/3]?

> +				ce->status = PCE_STATUS_ENABLED;
>  		}
>  	}
>  
> 

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 2/3] power: clock_ops.c: check return of clk_enable() in pm_clk_resume()

[Ben Dooks]

On 13/01/14 19:55, Rafael J. Wysocki wrote:
> On Saturday, January 11, 2014 01:05:39 PM Ben Dooks wrote:

>> @@ -262,8 +263,9 @@ int pm_clk_resume(struct device *dev)
>>
>>   	list_for_each_entry(ce, &psd->clock_list, node) {
>>   		if (ce->status < PCE_STATUS_ERROR) {
>> -			clk_enable(ce->clk);
>> -			ce->status = PCE_STATUS_ENABLED;
>> +			ret = clk_enable(ce->clk);
>> +			if (ret = 0)
>
> Can you please use if (!ret) here?
>
> And analogously in patch [3/3]?

I will fix and re-send today, thanks.


-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

Re: [PATCH 2/3] power: clock_ops.c: check return of clk_enable() in pm_clk_resume()

[Ben Dooks]

On 13/01/14 19:55, Rafael J. Wysocki wrote:
> On Saturday, January 11, 2014 01:05:39 PM Ben Dooks wrote:

>> @@ -262,8 +263,9 @@ int pm_clk_resume(struct device *dev)
>>
>>   	list_for_each_entry(ce, &psd->clock_list, node) {
>>   		if (ce->status < PCE_STATUS_ERROR) {
>> -			clk_enable(ce->clk);
>> -			ce->status = PCE_STATUS_ENABLED;
>> +			ret = clk_enable(ce->clk);
>> +			if (ret == 0)
>
> Can you please use if (!ret) here?
>
> And analogously in patch [3/3]?

I will fix and re-send today, thanks.


-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

[PATCH 2/3] power: clock_ops.c: check return of clk_enable() in pm_clk_resume()

[Ben Dooks]

The clk_enable() call in the pm_clk_resume() call returns an error
that is not being checked. If clk_enable() fails then we should
not set the state of the clock to PCE_STATUS_ENABLED.

Note, the issue of warning the user if this fails has not been
addressed in this patch as this is not the only place the driver
calls clk_enable().

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
---
 drivers/base/power/clock_ops.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index b9dd8fa..cad7190 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -252,6 +252,7 @@ int pm_clk_resume(struct device *dev)
 	struct pm_subsys_data *psd = dev_to_psd(dev);
 	struct pm_clock_entry *ce;
 	unsigned long flags;
+	int ret;
 
 	dev_dbg(dev, "%s()\n", __func__);
 
@@ -262,8 +263,9 @@ int pm_clk_resume(struct device *dev)
 
 	list_for_each_entry(ce, &psd->clock_list, node) {
 		if (ce->status < PCE_STATUS_ERROR) {
-			clk_enable(ce->clk);
-			ce->status = PCE_STATUS_ENABLED;
+			ret = clk_enable(ce->clk);
+			if (!ret)
+				ce->status = PCE_STATUS_ENABLED;
 		}
 	}
 
-- 
1.8.5.2