Re: [PATCH 6/6] sabre: don't call sysbus_mmio_map() in sabre_realize()

["Philippe Mathieu-Daudé" <f4bug@amsat.org>]

On 9/20/20 10:20 AM, Mark Cave-Ayland wrote:
> The device should not map itself but instead should be mapped to sysbus by the
> sun4u machine.

Yeah good cleanup.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

> 
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
> ---
>  hw/pci-host/sabre.c | 8 --------
>  hw/sparc64/sun4u.c  | 7 +++++++
>  2 files changed, 7 insertions(+), 8 deletions(-)
> 
> diff --git a/hw/pci-host/sabre.c b/hw/pci-host/sabre.c
> index 5ac6283623..5394ad5cd0 100644
> --- a/hw/pci-host/sabre.c
> +++ b/hw/pci-host/sabre.c
> @@ -378,16 +378,8 @@ static void sabre_realize(DeviceState *dev, Error **errp)
>  {
>      SabreState *s = SABRE(dev);
>      PCIHostState *phb = PCI_HOST_BRIDGE(dev);
> -    SysBusDevice *sbd = SYS_BUS_DEVICE(s);
>      PCIDevice *pci_dev;
>  
> -    /* sabre_config */
> -    sysbus_mmio_map(sbd, 0, s->special_base);
> -    /* PCI configuration space */
> -    sysbus_mmio_map(sbd, 1, s->special_base + 0x1000000ULL);
> -    /* pci_ioport */
> -    sysbus_mmio_map(sbd, 2, s->special_base + 0x2000000ULL);
> -
>      memory_region_init(&s->pci_mmio, OBJECT(s), "pci-mmio", 0x100000000ULL);
>      memory_region_add_subregion(get_system_memory(), s->mem_base,
>                                  &s->pci_mmio);
> diff --git a/hw/sparc64/sun4u.c b/hw/sparc64/sun4u.c
> index b4aabfc076..f80ddde5dc 100644
> --- a/hw/sparc64/sun4u.c
> +++ b/hw/sparc64/sun4u.c
> @@ -592,6 +592,13 @@ static void sun4uv_init(MemoryRegion *address_space_mem,
>                               &error_abort);
>      sysbus_realize_and_unref(SYS_BUS_DEVICE(sabre), &error_fatal);
>  
> +    /* sabre_config */
> +    sysbus_mmio_map(SYS_BUS_DEVICE(sabre), 0, PBM_SPECIAL_BASE);
> +    /* PCI configuration space */
> +    sysbus_mmio_map(SYS_BUS_DEVICE(sabre), 1, PBM_SPECIAL_BASE + 0x1000000ULL);
> +    /* pci_ioport */
> +    sysbus_mmio_map(SYS_BUS_DEVICE(sabre), 2, PBM_SPECIAL_BASE + 0x2000000ULL);
> +
>      /* Wire up PCI interrupts to CPU */
>      for (i = 0; i < IVEC_MAX; i++) {
>          qdev_connect_gpio_out_named(DEVICE(sabre), "ivec-irq", i,
>